/*
   This is part of rtl8187 OpenSource driver.
   Copyright (C) Andrea Merello 2004-2005  <andreamrl@tiscali.it>
   Released under the terms of GPL (General Public Licence)

   Parts of this driver are based on the GPL part of the
   official realtek driver

   Parts of this driver are based on the rtl8192 driver skeleton
   from Patric Schenke & Andres Salomon

   Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver

   We want to tanks the Authors of those projects and the Ndiswrapper
   project Authors.
*/

#ifndef R819xU_H
#define R819xU_H

#include <linux/module.h>
#include <linux/kernel.h>
//#include <linux/config.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/netdevice.h>
//#include <linux/pci.h>
#include <linux/usb.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
#include <linux/rtnetlink.h>	//for rtnl_lock()
#include <linux/wireless.h>
#include <linux/timer.h>
#include <linux/proc_fs.h>	// Necessary because we use the proc fs
#include <linux/if_arp.h>
#include <linux/random.h>
#include <linux/version.h>
#include <asm/io.h>
#include "ieee80211/ieee80211.h"

#define RTL8192U
#define RTL819xU_MODULE_NAME "rtl819xU"
//added for HW security, john.0629
#define FALSE 0
#define TRUE 1
#define MAX_KEY_LEN     61
#define KEY_BUF_SIZE    5

#define BIT0            0x00000001
#define BIT1            0x00000002
#define BIT2            0x00000004
#define BIT3            0x00000008
#define BIT4            0x00000010
#define BIT5            0x00000020
#define BIT6            0x00000040
#define BIT7            0x00000080
#define BIT8            0x00000100
#define BIT9            0x00000200
#define BIT10           0x00000400
#define BIT11           0x00000800
#define BIT12           0x00001000
#define BIT13           0x00002000
#define BIT14           0x00004000
#define BIT15           0x00008000
#define BIT16           0x00010000
#define BIT17           0x00020000
#define BIT18           0x00040000
#define BIT19           0x00080000
#define BIT20           0x00100000
#define BIT21           0x00200000
#define BIT22           0x00400000
#define BIT23           0x00800000
#define BIT24           0x01000000
#define BIT25           0x02000000
#define BIT26           0x04000000
#define BIT27           0x08000000
#define BIT28           0x10000000
#define BIT29           0x20000000
#define BIT30           0x40000000
#define BIT31           0x80000000

// Rx smooth factor
#define	Rx_Smooth_Factor		20
#define DMESG(x,a...)
#define DMESGW(x,a...)
#define DMESGE(x,a...)
extern u32 rt_global_debug_component;
#define RT_TRACE(component, x, args...) \
do { if(rt_global_debug_component & component) \
	printk(KERN_DEBUG RTL819xU_MODULE_NAME ":" x "\n" , \
	       ##args);\
}while(0);

#define COMP_TRACE				BIT0		// For function call tracing.
#define COMP_DBG				BIT1		// Only for temporary debug message.
#define COMP_INIT				BIT2		// during driver initialization / halt / reset.


#define COMP_RECV				BIT3		// Reveive part data path.
#define COMP_SEND				BIT4		// Send part path.
#define COMP_IO					BIT5		// I/O Related. Added by Annie, 2006-03-02.
#define COMP_POWER				BIT6		// 802.11 Power Save mode or System/Device Power state related.
#define COMP_EPROM				BIT7		// 802.11 link related: join/start BSS, leave BSS.
#define COMP_SWBW				BIT8	// For bandwidth switch.
#define COMP_POWER_TRACKING			BIT9	//FOR 8190 TX POWER TRACKING
#define COMP_TURBO				BIT10	// For Turbo Mode related. By Annie, 2005-10-21.
#define COMP_QOS				BIT11	// For QoS.
#define COMP_RATE				BIT12	// For Rate Adaptive mechanism, 2006.07.02, by rcnjko.
#define COMP_RM					BIT13	// For Radio Measurement.
#define COMP_DIG				BIT14	// For DIG, 2006.09.25, by rcnjko.
#define COMP_PHY	 			BIT15
#define COMP_CH					BIT16	//channel setting debug
#define COMP_TXAGC				BIT17	// For Tx power, 060928, by rcnjko.
#define COMP_HIPWR				BIT18	// For High Power Mechanism, 060928, by rcnjko.
#define COMP_HALDM				BIT19	// For HW Dynamic Mechanism, 061010, by rcnjko.
#define COMP_SEC			        BIT20	// Event handling
#define COMP_LED				BIT21	// For LED.
#define COMP_RF					BIT22	// For RF.
//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
#define COMP_RXDESC				BIT23	// Show Rx desc information for SD3 debug. Added by Annie, 2006-07-15.
//1//1Attention Please!!!<11n or 8190 specific code should be put below this line>
//1!!!!!!!!!!!!!!!!!!!!!!!!!!!

#define COMP_FIRMWARE				BIT24	//for firmware downloading
#define COMP_HT					BIT25	// For 802.11n HT related information. by Emily 2006-8-11
#define COMP_AMSDU				BIT26	// For A-MSDU Debugging

#define COMP_SCAN				BIT27
//#define COMP_RESET				BIT28
#define COMP_DOWN				BIT29  //for rm driver module
#define COMP_RESET				BIT30  //for silent reset
#define COMP_ERR				BIT31 //for error out, always on

#define RTL819x_DEBUG
#ifdef RTL819x_DEBUG
#define assert(expr) \
        if (!(expr)) {                                  \
                printk( "Assertion failed! %s,%s,%s,line=%d\n", \
                #expr,__FILE__,__FUNCTION__,__LINE__);          \
        }
//wb added to debug out data buf
//if you want print DATA buffer related BA, please set ieee80211_debug_level to DATA|BA
#define RT_DEBUG_DATA(level, data, datalen)      \
        do{ if ((rt_global_debug_component & (level)) == (level))   \
                {       \
                        int i;                                  \
                        u8* pdata = (u8*) data;                 \
                        printk(KERN_DEBUG RTL819xU_MODULE_NAME ": %s()\n", __FUNCTION__);   \
                        for(i=0; i<(int)(datalen); i++)                 \
                        {                                               \
                                printk("%2x ", pdata[i]);               \
                                if ((i+1)%16 == 0) printk("\n");        \
                        }                               \
                        printk("\n");                   \
                }                                       \
        } while (0)
#else
#define assert(expr) do {} while (0)
#define RT_DEBUG_DATA(level, data, datalen) do {} while(0)
#endif /* RTL8169_DEBUG */


//
// Queue Select Value in TxDesc
//
#define QSLT_BK                                 0x1
#define QSLT_BE                                 0x0
#define QSLT_VI                                 0x4
#define QSLT_VO                                 0x6
#define QSLT_BEACON                             0x10
#define QSLT_HIGH                               0x11
#define QSLT_MGNT                               0x12
#define QSLT_CMD                                0x13

#define DESC90_RATE1M                           0x00
#define DESC90_RATE2M                           0x01
#define DESC90_RATE5_5M                         0x02
#define DESC90_RATE11M                          0x03
#define DESC90_RATE6M                           0x04
#define DESC90_RATE9M                           0x05
#define DESC90_RATE12M                          0x06
#define DESC90_RATE18M                          0x07
#define DESC90_RATE24M                          0x08
#define DESC90_RATE36M                          0x09
#define DESC90_RATE48M                          0x0a
#define DESC90_RATE54M                          0x0b
#define DESC90_RATEMCS0                         0x00
#define DESC90_RATEMCS1                         0x01
#define DESC90_RATEMCS2                         0x02
#define DESC90_RATEMCS3                         0x03
#define DESC90_RATEMCS4                         0x04
#define DESC90_RATEMCS5                         0x05
#define DESC90_RATEMCS6                         0x06
#define DESC90_RATEMCS7                         0x07
#define DESC90_RATEM