path: root/drivers/net/wireless/ath/wil6210/wmi.h

/*
 * Copyright (c) 2012 Qualcomm Atheros, Inc.
 * Copyright (c) 2006-2012 Wilocity .
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

/*
 * This file contains the definitions of the WMI protocol specified in the
 * Wireless Module Interface (WMI) for the Wilocity
 * MARLON 60 Gigabit wireless solution.
 * It includes definitions of all the commands and events.
 * Commands are messages from the host to the WM.
 * Events are messages from the WM to the host.
 */

#ifndef __WILOCITY_WMI_H__
#define __WILOCITY_WMI_H__

/* General */
#define WILOCITY_MAX_ASSOC_STA (8)
#define WMI_MAC_LEN		(6)
#define WMI_PROX_RANGE_NUM	(3)

/* List of Commands */
enum wmi_command_id {
	WMI_CONNECT_CMDID		= 0x0001,
	WMI_DISCONNECT_CMDID		= 0x0003,
	WMI_DISCONNECT_STA_CMDID	= 0x0004,
	WMI_START_SCAN_CMDID		= 0x0007,
	WMI_SET_BSS_FILTER_CMDID	= 0x0009,
	WMI_SET_PROBED_SSID_CMDID	= 0x000a,
	WMI_SET_LISTEN_INT_CMDID	= 0x000b,
	WMI_BCON_CTRL_CMDID		= 0x000f,
	WMI_ADD_CIPHER_KEY_CMDID	= 0x0016,
	WMI_DELETE_CIPHER_KEY_CMDID	= 0x0017,
	WMI_SET_APPIE_CMDID		= 0x003f,
	WMI_SET_WSC_STATUS_CMDID	= 0x0041,
	WMI_PXMT_RANGE_CFG_CMDID	= 0x0042,
	WMI_PXMT_SNR2_RANGE_CFG_CMDID	= 0x0043,
	WMI_FAST_MEM_ACC_MODE_CMDID	= 0x0300,
	WMI_MEM_READ_CMDID		= 0x0800,
	WMI_MEM_WR_CMDID		= 0x0801,
	WMI_ECHO_CMDID			= 0x0803,
	WMI_DEEP_ECHO_CMDID		= 0x0804,
	WMI_CONFIG_MAC_CMDID		= 0x0805,
	WMI_CONFIG_PHY_DEBUG_CMDID	= 0x0806,
	WMI_ADD_DEBUG_TX_PCKT_CMDID	= 0x0808,
	WMI_PHY_GET_STATISTICS_CMDID	= 0x0809,
	WMI_FS_TUNE_CMDID		= 0x080a,
	WMI_CORR_MEASURE_CMDID		= 0x080b,
	WMI_READ_RSSI_CMDID		= 0x080c,
	WMI_TEMP_SENSE_CMDID		= 0x080e,
	WMI_DC_CALIB_CMDID		= 0x080f,
	WMI_SEND_TONE_CMDID		= 0x0810,
	WMI_IQ_TX_CALIB_CMDID		= 0x0811,
	WMI_IQ_RX_CALIB_CMDID		= 0x0812,
	WMI_SET_UCODE_IDLE_CMDID	= 0x0813,
	WMI_SET_WORK_MODE_CMDID		= 0x0815,
	WMI_LO_LEAKAGE_CALIB_CMDID	= 0x0816,
	WMI_MARLON_R_ACTIVATE_CMDID	= 0x0817,
	WMI_MARLON_R_READ_CMDID		= 0x0818,
	WMI_MARLON_R_WRITE_CMDID	= 0x0819,
	WMI_MARLON_R_TXRX_SEL_CMDID	= 0x081a,
	MAC_IO_STATIC_PARAMS_CMDID	= 0x081b,
	MAC_IO_DYNAMIC_PARAMS_CMDID	= 0x081c,
	WMI_SILENT_RSSI_CALIB_CMDID	= 0x081d,
	WMI_RF_RX_TEST_CMDID		= 0x081e,
	WMI_CFG_RX_CHAIN_CMDID		= 0x0820,
	WMI_VRING_CFG_CMDID		= 0x0821,
	WMI_VRING_BA_EN_CMDID		= 0x0823,
	WMI_VRING_BA_DIS_CMDID		= 0x0824,
	WMI_RCP_ADDBA_RESP_CMDID	= 0x0825,
	WMI_RCP_DELBA_CMDID		= 0x0826,
	WMI_SET_SSID_CMDID		= 0x0827,
	WMI_GET_SSID_CMDID		= 0x0828,
	WMI_SET_PCP_CHANNEL_CMDID	= 0x0829,
	WMI_GET_PCP_CHANNEL_CMDID	= 0x082a,
	WMI_SW_TX_REQ_CMDID		= 0x082b,
	WMI_READ_MAC_RXQ_CMDID		= 0x0830,