| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb into next
Pull USB driver updates from Greg KH:
"Here is the big USB driver pull request for 3.16-rc1.
Nothing huge here, but lots of little things in the USB core, and in
lots of drivers. Hopefully the USB power management will be work
better now that it has been reworked to do per-port power control
dynamically. There's also a raft of gadget driver updates and fixes,
CONFIG_USB_DEBUG is finally gone now that everything has been
converted over to the dynamic debug inteface, the last hold-out
drivers were cleaned up and the config option removed. There were
also other minor things all through the drivers/usb/ tree, the
shortlog shows this pretty well.
All have been in linux-next, including the very last patch, which came
from linux-next to fix a build issue on some platforms"
* tag 'usb-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (314 commits)
usb: hub_handle_remote_wakeup() only exists for CONFIG_PM=y
USB: orinoco_usb: remove CONFIG_USB_DEBUG support
USB: media: lirc: igorplugusb: remove CONFIG_USB_DEBUG support
USB: media: streamzap: remove CONFIG_USB_DEBUG
USB: media: redrat3: remove CONFIG_USB_DEBUG usage
USB: media: redrat3: remove unneeded tracing macro
usb: qcserial: add additional Sierra Wireless QMI devices
usb: host: max3421-hcd: Use module_spi_driver
usb: host: max3421-hcd: Allow platform-data to specify Vbus polarity
usb: host: max3421-hcd: fix "spi_rd8" uses dynamic stack allocation warning
usb: host: max3421-hcd: Fix missing unlock in max3421_urb_enqueue()
usb: qcserial: add Netgear AirCard 341U
Documentation: dt-bindings: update xhci-platform DT binding for R-Car H2 and M2
usb: host: xhci-plat: add xhci_plat_start()
usb: host: max3421-hcd: Fix potential NULL urb dereference
Revert "usb: gadget: net2280: Add support for PLX USB338X"
USB: usbip: remove CONFIG_USB_DEBUG reference
USB: remove CONFIG_USB_DEBUG from defconfig files
usb: resume child device when port is powered on
usb: hub_handle_remote_wakeup() depends on CONFIG_PM_RUNTIME=y
...
|
|
As the config option is gone, it's a bit hard to enable it so remove the
reference to it.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use the normal mechanism for emitting a function name.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix bad function definitions in all files from drivers/staging/usbip directory
Signed-off-by: Pawel Lebioda <pawel.lebioda89@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix "Missing a blank line after declaration" style problems
for all files in drivers/staging/usbip.
Signed-off-by: Pawel Lebioda <pawel.lebioda89@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
refresh_exported_devices() doesn't check udev_device_new_from_syspath()
return value and passed in null dev to udev_device_get_driver() resulting
in a segmentation fault. Change it to check for null return value from
both udev_device_new_from_syspath() and udev_device_get_driver().
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is an optional dependency since USB/IP can fully work without
it. However, it is needed to display device information such as
vendor.
Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
configuration specific attributes
When a device has just been bound to usbip-host but the client hasn't
set a configuration on it, certain attributes will not exist. Don't
treat this as an error.
Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A sysfs attribute is used to announce kernel space that a
new driver probing session should be triggered for the just
unbinded device.
In order to have the address of struct device associated to this
USB device, a new member has been added to struct bus_id_priv.
Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add libudev as dependency and remove libsysfs.
Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
libsysfs is now completely removed from USB/IP.
Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch migrates vhci_driver to libudev.
Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Reviewed-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The class device lists were used only when being initialized,
being populated and being destroyed. They had no real meaning
and thus the code was useless.
Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch modifies usbip_host_driver to use libudev.
Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Reviewed-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since it offers a API to both usbip tools and libusbip,
it is more appropriate to be place in the library.
Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Take the linked list implementation from the Linux Kernel
and strip it down to what it is needed.
Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This was deleted in the driver conversion patch. It didn't need
to be deleted; showing more information is ok.
Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Reviewed-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch modifies usbip_list to use libudev.
Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch modifies usbip_unbind to use libudev.
Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Reviewed-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes useless libsysfs.h includes in various
userspace files.
Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds autoconf check for libudev and migrates
usbip_bind to the new library.
libsysfs will still be used until all userspace is modified.
Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Reviewed-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
usbip userspace has duplicated enum definition to report usbip device
status maintained by the kernel. A new uapi usbip.h now defines the
usbip device status for kernel and userspace to use. Change usbip
userspace to include uapi usbip.h for usbip device status.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Memory was leaked and a device not closed if we ran out of memory on the
system.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Argument type of sockfd is set as int, but format string
is set as unsigned int. Fix the mismatch.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
To avoid buffer overflow while reading a corrupted or possibly
modified port file we validate the length of each part of the port
record to ensure it doesn't exceed the length of the destination
buffer.
https://bugzilla.kernel.org/show_bug.cgi?id=69931
Signed-off-by: Mark Asselstine <asselsm@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is to pull in the lustre fixes so that others can continue to work
on updating the lustre codebase, as well as resolve some merge issues
with the ion and ocproto drivers to keep linux-next happy.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
revised patch
p is freed if NULL.
p is leaked if second calloc fails.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
missing speeds to speed_strings array
Remove usb_device_speed enum define from usbip_common.h and change it to
include linux/usb/ch9.h instead. Add speed strings for usb wireless and 3.0
to speed_strings array.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This driver was previously an interface driver. Since USB/IP
exports a whole device, not just an interface, it would make
sense to be a device driver.
This patch also modifies the way userspace sees and uses a
shared device:
* the usbip_status file is no longer created for interface 0, but for
the whole device (such as
/sys/devices/pci0000:00/0000:00:01.2/usb1/1-1/usbip_status).
* per interface information, such as interface class or protocol, is
no longer sent/received; only device specific information is
transmitted.
* since the driver was moved one level below in the USB architecture,
there is no need to bind/unbind each interface, just the device as a
whole.
Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As of Matt Mooney's major refactoring in 2011, usbip port
option was left out. Add support for this option in
a manner similar to the old implementation.
Sample output:
Imported USB devices
====================
Port 00: <Port in Use> at Full Speed(12Mbps)
unknown vendor : unknown product (1687:6211)
2-1 -> usbip://192.168.122.152:3240/1-1
-> remote bus/dev 001/002
Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Reviewed-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Scan only to the length permitted by the buffer
One of a set of sscanf problems noted by Jackie Chang
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The usbip userspace utilities contained some half-documented (only in
--help, not in man) options. They were added to the man-pages of usbip
and usbipd.
Also a typo in the usbip headline was fixed.
Signed-off-by: Tobias Polzer <tobias.polzer@fau.de>
Signed-off-by: Dominik Paulus <dominik.paulus@fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
getaddrinfo() leaves the order of the returned addrinfo structs
unspecified. On systems with bindv6only disabled (this is the default),
PF_INET6 sockets bind to IPv4, too. Thus, IPv6 support in usbipd was
broken when getaddrinfo returned first IPv4 and then IPv6 addrinfos, as
the IPv6 bind failed with EADDRINUSE.
This patch uses seperate sockets for IPv4 and IPv6 and sets IPV6_V6ONLY
on all IPv6 sockets. Two command line arguments, -4 and -6 were added to
manually select the socket family.
Signed-off-by: Tobias Polzer <tobias.polzer@fau.de>
Signed-off-by: Dominik Paulus <dominik.paulus@fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
One missing include was added.
Signed-off-by: Dominik Paulus <dominik.paulus@fau.de>
Signed-off-by: Tobias Polzer <tobias.polzer@fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With --with-tcp-wrappers=no specified, the build system reset LIBS to
the empty string and thus fails to link against libsysfs.
Signed-off-by: Dominik Paulus <dominik.paulus@fau.de>
Signed-off-by: Tobias Polzer <tobias.polzer@fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Re-align the option lists.
Signed-off-by: Anthony Foiani <anthony.foiani@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This option is in the long options list, and it's handled in the
option processing loop, but the optstring didn't include it.
Signed-off-by: Anthony Foiani <anthony.foiani@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add an option "-t" / "--tcp-port" to specify the TCP port to listen
on. Downcase associated variables as they're no longer constants.
Signed-off-by: Anthony Foiani <anthony.foiani@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Introduce option "-P" / "--pid" to request that usbipd save its PID to
a file while running.
Signed-off-by: Anthony Foiani <anthony.foiani@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Correct spelling typo in comments
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Give useful error messages when we can't create server sockets.
Signed-Off-By: Anthony Foiani <anthony.foiani@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Using a simple integer makes the code easier to read and removes the
need to blank out array elements in case of errors.
Signed-Off-By: Anthony Foiani <anthony.foiani@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A few whitespace changes allows the file to pass checkpatch --strict
(other than ignoring the CamelCase derived from the USB standard.)
Signed-Off-By: Anthony Foiani <anthony.foiani@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The `usbip list -l' command shows your local usb-devices.
Example:
$ usbip list -l
$ Local USB devices
$ =================
$ - busid 1-1 (13fe:1d00)
$ 1-1:1.0 -> usb-storage
$
$ - busid 1-2 (0409:55aa)
$ 1-2:1.0 -> hub
However this list command doesn't show which device is connected
to this busid. Therefore you have to use another tool e.g. lsusb
to determine that.
This patches adds the possibility to see which device that is.
Example:
$ usbip list -l
$ Local USB devices
$ =================
$ - busid 1-1 (13fe:1d00)
$ Kingston Technology Company Inc. : DataTraveler 2.0 1GB/4GB Flash Drive / Patriot Xporter 4GB Flash
$ 1-1:1.0 -> usb-storage
$
$ - busid 1-2 (0409:55aa)
$ NEC Corp. : Hub (0409:55aa)
$ 1-2:1.0 -> hub
If parsable is specified the info will be not printed.
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The command `usbip attach' uses --host for specifing
the remote host, while `usbip list' uses --remote.
This is confusing and this patch adapts this.
In Addition changed the manpage and README accordingly.
Before:
$ usbip attach --host <host> -b <busid>
$ usbip list --remote <host>
Now:
$ usbip attach --remote <host> -b <busid>
$ usbip list --remote <host>
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since the names.c/names.h are taken from another project, some
functions which names.c provides aren't used by usbipd.
This patch fixes:
- removed useless comments
- unified debug/error messages by using the macros
provided by usbip_common.h
- removed unnused code
The code cleanup includes:
- remove unused data structures
- remove code to create them
- remove code to access them
The file names.c is used to parse the `usb.ids' file. The parser
stores a lot of information about usb devices that is never used.
The `usb.ids' file has several sections. Some variables (like
`lasthut') store the ID of the current section, and those variables
are used to decide which section is currently being parsed (i.e. in
which data structure the current line will be stored).
We removed the code to read those IDs because they are never used
anyway. We replaced them by the pseudo-ID `1' (instead of reading the
ID from the file) to indicate that the parser is in a section that
can be ignored. If the parser is in such a section, the current line
(which contains sub-items for this section) is discarded.
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since no usbip_name function is used in usbipd, it's not
necessary to parse "usb.ids" file at startup.
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Call freeaddrinfo when connect/listen fails.
Call usbip_host_driver_close on error.
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
replace numbers in code by ascii text constants as suggested
by Dan Carpenter:
http://driverdev.linuxdriverproject.org/pipermail/devel/2013-February/035907.html
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
