| Age | Commit message (Collapse) | Author |
|---|
|
batman-adv is now moved to net/batman-adv/ and can be removed from
staging.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This was done to handle a number of conflicts in the batman-adv
and winbond drivers properly. It also now allows us to fix up the sysfs
attributes properly that were not in the .37 release due to them being
only in this tree at the time.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
The kernel headers already provide different versions of a min/max macro
which should be used by all modules according to
Documentation/CodingStyle.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Both sysfs entries and variable names shall be as descriptive as
possible while not exceeding a certain length. This patch renames
bat_priv atomics to be equally descriptive with their according sysfs
entries.
Unifying sysfs and bat_priv atomic names also makes it easier to find
each others pendant.
The reduced ("type"-)information which was previously indicated with a
_enabled for booleans got substituted by a comment in bat_priv.
This patch has also been done in regards for the future BAT_ATTR_*
macros (they only need one name argument instead of a file and variable
name).
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
We call a lot of the netdevice code when holding if_list_lock which will
spin the whole time. This is not necessary because we only want to
protect the access to the list to be serialized. An extra queue can be
used which hold all interfaces which should be removed and then use that
queue without any locks for netdevice cleanup.
Reported-by: Rafal Lesniak <lesniak@eresi-project.org>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
We call a lot of the netdevice code when holding if_list_lock which will
spin the whole time. This is not necessary because we only want to
protect the access to the list to be serialized. An extra queue can be
used which hold all interfaces which should be removed and then use that
queue without any locks for netdevice cleanup.
We create a "scheduling while atomic" Oops when calling different
netdevice related functions inside a spinlock protected area on a
preemtible kernel.
Reported-by: Rafal Lesniak <lesniak@eresi-project.org>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Whenever the mac address of an batman interface is changed
check_known_mac_addr() is called to print a warning if the newly added
mac address exists an another batman interface. While looping through
the batman interface list check_known_mac_addr() only compares mac
addresses and does not make sure they belong to different interfaces,
thus always printing a warning.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Since all *printf() methods in the kernel understand '%pM' modifier the
conversion to the string is useless beforehand.
Additionally this patch decreases batman_if structure by 20 bytes.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Marek Lindner <lindner_marek@yahoo.de>
Cc: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
set_primary_if is currently misused to update the mac address in vis
packets. This unneeded and introduces overhead due to other operations
which must be done when updating the primary interface.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
set_primary_if exchanges the current primary interfaces with a new one.
This is a new reference and thus we have to count it and decrease the
count of the old primary interface.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
The return of get_batman_if_by_netdev and get_active_batman_if leaks a
pointer from the rcu protected list of interfaces. We must protect it to
prevent a too early release of the memory. Those functions must increase
the reference counter before rcu_read_unlock or it may be to late to
prevent a free.
hardif_add_interface must also increase the reference count for the
returned batman_if to make the behaviour consistent.
Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
get_batman_if_by_netdev and get_active_batman_if may leak data from the
rcu protected list of interfaces. The rcu protected list of all gateway
nodes leaks the actual data outside the read-side critical area. This is
not valid as we may free the data using a call_rcu created callback
after we unlock using rcu_read_unlock. A workaround is to provide a
reference count to be sure that the memory isn't freed to early.
It is currently only to implement the already existing functionality and
doesn't provide the full tracking of all usage cases.
Additionally, we must hardif_hold inside the
rcu_read_lock()..rcu_read_unlock() before we attach to the structure
which "leaks" it. When another function now removed it from its usage
context (primary_if, usage on stack, ...) then we must hardif_put it. If
it is decremented to zero then we can issue the call_rcu to the freeing
function. So "put" is not allowed inside an rcu_read_lock.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
It is recommended [1] to use synchronize_rcu to simplify the code -
especially when otherwise extra locking is needed to protect other code
from picking stale elements. It also protects us for emitting to many
callbacks which may results in OOM conditions.
The only reason not to use it, would be in performance critical sections
or when we are not allowed to block.
[1] Documentation/RCU/checklist.txt
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
The update critical sections of if_list must be protected by a locking
primitive other than RCU. The iterator must also be protected by the
chosen locking mechanism.
The rtnl_lock in hardif_remove_interfaces must also be moved outside the
iterator primitive to ensure that we don't deadlock the kernel due to
differently nested locks in hardif_remove_interfaces and hard_if_event.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
We must reduce our own mtu when we reduce the mtu of any device we use
to transfer our packets. Otherwise we may accept to large packets which
gets dropped by the actual device.
Reported-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
batman_if has the name of the net_dev as extra string in its own
structure, but also holds a reference to the actual net_device structure
which always has the current name of the device. This makes it
unneccessary and also more complex because we must update the name in
situations when we receive a NETDEV_CHANGENAME event.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This patch removes all remaining global variables and includes the
necessary bits into the bat_priv structure. It is the last
remaining piece to allow multiple concurrent mesh clouds on the
same device.
A few global variables have been rendered obsolete during the process
and have been removed entirely.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
[sven.eckelmann@gmx.de: Rework on top of current version]
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This patch replaces the static bat0 interface with a dynamic/abstracted
approach. It is now possible to create multiple batX interfaces by
assigning hard interfaces to them. Each batX interface acts as an
independent mesh network. A soft interface is removed once no hard
interface references it any longer.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
[sven.eckelmann@gmx.de: Rework on top of current version]
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
We must ensure that all interesting data is linear and not paged out to
access all information in a header or a full batman-adv related packet.
Otherwise we may drop packets which have non-linear headers but which
hold valid data.
This doesn't affect non-linear skbs which have all headers in a linear
head unless we must process the whole packet like in ogms or vis
packets.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Batman-adv globally registered the batman-adv packet type and installed
a hook to batman_skb_recv(). Each interface receiving a packet with that
type would end up in this function which then had to loop through all
batman-adv internal interface structures to find the its meta data. The
more interfaces a system had the longer the loops might take. Each and
every packet goes through this function making it a performance critical
loop.
This patch installs the hook for each activated interface. The called
batman_skb_recv() can distinguish these calls, therefore avoiding the
loop through the interface structures.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
[sven.eckelmann@gmx.de: Rework on top of current version]
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This patch implements a simple layer2 fragmentation to allow traffic
exchange over network interfaces with a MTU smaller than 1500 bytes. The
fragmentation splits the big packets into two parts and marks the frames
accordingly. The receiving end buffers the packets to reassemble the
orignal packet before passing it to the higher layers. This feature
makes it necessary to modify the batman-adv encapsulation for unicast
packets by adding a sequence number, flags and the originator address.
This modifcation is part of a seperate packet type for fragemented
packets to keep the original overhead as low as possible. This patch
enables the feature by default to ensure the data traffic can travel
through the network. But it also prints a warning to notify the user
about the performance implications.
Note: Fragmentation should be avoided at all costs since it has a
dramatic impact on the performance, especially when it comes wifi
networks. Instead of a single packet, 2 packets have to be sent! Not
only valuable airtime is wasted but also packetloss decreases the
throughput. A link with 50% packetloss and fragmentation enabled is
pretty much unusable.
Signed-off-by: Andreas Langer <an.langer@gmx.de>
[sven.eckelmann@gmx.de: Rework on top of current version]
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This reverts commit 96d592ed599434d2d5f339a1d282871bc6377d2c.
The netfilter hook seems to be misused and may leak skbs in situations
when NF_HOOK returns NF_STOLEN. It may not filter everything as
expected. Also the ethernet bridge tables are not yet capable to
understand batman-adv packet correctly.
It was only added for testing purposes and can be removed again.
Reported-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Each net_device in a system will automatically managed as a possible
batman_if and holds different informations like a buffer with a prepared
originator messages. To reduce the memory usage, the packet_buff will
only be allocated when the interface is really added/enabled for
batman-adv.
The function to update the hw address information inside the packet_buff
just assumes that the packet_buff is always initialised and thus the
kernel will just oops when we try to change the hw address of a not
already fully enabled interface.
We must always check if the packet_buff is allocated before we try to
change information inside of it.
Reported-by: Tim Glaremin <Tim.Glaremin@web.de>
Reported-by: Kazuki Shimada <zukky@bb.banban.jp>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
dev_put allows a device to be freed when all its references are dropped.
After that we are not allowed to access that information anymore. Access
to the data structure of a net_device must be surrounded a dev_hold
and ended using dev_put.
batman-adv adds a device to its own management structure in
hardif_add_interface and will release it in hardif_remove_interface.
Thus it must hold a reference all the time between those functions to
prevent any access to the already released net_device structure.
Reported-by: Tim Glaremin <Tim.Glaremin@web.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
We try to get all events for all net_devices to be able to add special
sysfs folders for the batman-adv configuration. This also includes such
events like NETDEV_POST_INIT which has no valid kobject according to
v2.6.32-rc3-13-g7ffbe3f. This would create an oops in that situation.
It is enough to create the batman_if only on NETDEV_REGISTER events
because we will also receive those events for devices which already
existed when we registered the notifier call.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Greg Kroah-Hartman merged Linus 2.6.36 tree in
e9563355ac1175dd3440dc2ea5c28b27ed51a283 with his staging tree.
Different parts of the merge conflicts were resolved incorrectly and may
result in an abnormal behavior.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Conflicts:
drivers/staging/Kconfig
drivers/staging/batman-adv/bat_sysfs.c
drivers/staging/batman-adv/device.c
drivers/staging/batman-adv/hard-interface.c
drivers/staging/cx25821/cx25821-audups11.c
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
The receive hook for batman-adv ethernet frames tried to get the last
device which processed the skb before us. It only used that information
to update the rx_bytes and rx_packets stat of that foreign device which
already has updated it using its own receive functions.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Each general printk which is not informative by itself for a specific
batX device were moved to pr_(info|warning|err) as it provides an easy
interface which for example resolves the problem to add the prefix
"batman-adv: " before each line.
All information which is specific to a batX device will be printed using
a bat_(info|err|warning) macro to prefix it also with "batman-adv:
batX:" in each line.
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
All routing debug messages are saved in a ring buffer that can be
read via the debugfs file "log".
Note that CONFIG_BATMAN_ADV_DEBUG must be activated to have the
debug logs compiled in.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
There is a small possibility that a reader gets incorrect values on 32
bit arches. SNMP applications could catch incorrect counters when a
32bit high part is changed by another stats consumer/provider.
One way to solve this is to add a rtnl_link_stats64 param to all
ndo_get_stats64() methods, and also add such a parameter to
dev_get_stats().
Rule is that we are not allowed to use dev->stats64 as a temporary
storage for 64bit stats, but a caller provided area (usually on stack)
Old drivers (only providing get_stats() method) need no changes.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds interface alternating to the new bonding feature. By
default, we now try to avoid forwarding packets on the receiving
interface, instead choosing alternative interfaces. This feature
works only on nodes which have multiple interfaces connected to the
mesh. This approach should reduce problems of the half-duplex nature
of WiFi Hardware and thus increase performance.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Acked-by: Marek Lindner <lindner_marek@yahoo.de>
[sven.eckelmann@gmx.de: Rework on top of current version]
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This patch introduces bonding functionality to batman-advanced, targeted
for the 0.3 release. As we are able to route the payload traffic as we
want, we may use multiple interfaces on multihomed hosts to transfer data
to achieve higher bandwidth. This can be considered as "light Multi Path
Routing" for single hop connections.
To detect which interfaces of a peer node belong to the same host, a
new flag PRIMARIES_FIRST_HOP is introduced. This flag is set on the first hop
of OGMs of the primary (first) interface, which is broadcasted on all
interfaces. When receiving such an OGM, we can learn which interfaces
belong to the same host (by assigning them to the primary originator).
Bonding works by sending packets in a round-robin fashion to the available
interfaces of a neighbor host, if multiple interfaces are available. The
neighbor interfaces should be almost equally good to reach.
To avoid interferences (i.e. sending on the same channel), only neighbor
interfaces with different mac addresses and different outgoing interfaces
are considered as candidates.
Bonding is deactivated by default, and can be activated by
echo 1 > /sys/class/net/bat0/mesh/bonding
for each individual node.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
[sven.eckelmann@gmx.de: Rework on top of current version]
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
batman-adv is receiving and sending the packets of its own ether type
on a very early/low level. Therefore we need to add explicit hooks to
give netfilter/ebtables a chance to filter them.
Reported-by: Antonio Quartulli <ordex@ritirata.org>
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Register net_bridge_port pointer as rx_handler data pointer. As br_port is
removed from struct net_device, another netdev priv_flag is added to indicate
the device serves as a bridge port. Also rcuized pointers are now correctly
dereferenced in br_fdb.c and in netfilter parts.
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove all rcu head inits. We don't care about the RCU head state before
passing it to call_rcu() anyway. Only leave the "on_stack" variants so
debugobjects can keep track of objects on stack.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Cc: Marek Lindner <lindner_marek@yahoo.de>
Cc: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Documentation/CodingStyle sets a strongly prefered limit of 80
characters per line in "Chapter 2: Breaking long lines and strings".
Strings must be broken into smaller parts and long statements must be
rewritten.
Reported-by: Mikal Sande <mikal.sande@gmail.com>
Reported-by: Mark Rankilor <reodge@gmail.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Instead of having a single /proc file "interfaces" in which you have
to echo the wanted interface batman-adv will create a subfolder in each
suitable /sys/class/net folder. This subfolder contains files for the
interface specific settings. For example, mesh_iface to add/remove an
interface from a virtual mesh network (at the moment only bat0 is
supported).
Example:
echo bat0 > /sys/class/net/eth0/batman-adv/mesh_iface
to deactivate:
echo none > /sys/class/net/eth0/batman-adv/mesh_iface
Interfaces which are not compatible with batman-adv won't contain the
batman-adv folder, therefore can't be activated. Not supported are:
loopback, non-ethernet, non-ARP and virtual mesh network interfaces
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Make sure that batman-adv does not process packets before its
initialization is complete. Some sanity checks added to the receiver
function.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
skb_share_check() returns NULL if it can't allocate more memory but
it still frees the skbuff.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Since we are now part of mainline, we don't need compat.h to allow
building of the module with old versions of the kernel.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
printk() since kernel version 2.6.29 has supported printing MAC
addresses directly, as an extension to the %p processing. This patch
makes use of this for printk() and bat_dbg(). This will remove the
overhead of using addr_to_string() which is normally never actually
output.
Fixed a typo found by Gus Wirth.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This patch removes the (ugly and racy) packet receiving thread and the
kernel socket usage. Instead, packets are received directly by registering
the ethernet type and handling skbs instead of self-allocated buffers.
Some consequences and comments:
* we don't copy the payload data when forwarding/sending/receiving data
anymore. This should boost performance.
* packets from/to different interfaces can be (theoretically) processed
simultaneously. Only the big originator hash lock might be in the way.
* no more polling or sleeping/wakeup/scheduling issues when receiving
packets
* this might introduce new race conditions.
* aggregation and vis code still use packet buffers and are not (yet)
converted.
* all spinlocks were converted to irqsave/restore versions to solve
some lifelock issues when preempted. This might be overkill, some
of these locks might be reverted later.
* skb copies are only done if neccesary to avoid overhead
performance differences:
* we made some "benchmarks" with intel laptops.
* bandwidth on Gigabit Ethernet increased from ~500 MBit/s to ~920 MBit/s
* ping latency decresed from ~2ms to ~0.2 ms
I did some tests on my 9 node qemu environment and could confirm that
usual sending/receiving, forwarding, vis, batctl ping etc works.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Acked-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Acked-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
instead of dynamically registering hash iterators, calling functions are
changed to register the iterator objects statically. The two advantages are:
* no memory leaks when aborting from hash_iterate()
* no calls to kmalloc/kfree, therefore a little faster/safer
Tested with 9 QEMU instances, no obvious regression found.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
It is safe to call kfree(NULL) which makes this extra check unneeded. It
was found using checkpatch.pl from linux-2.6
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
batman-adv used its own logging infrastructure. Replace this with
standard kernel logging, printk(), with compile time and runtime
options to enable/disable different debug levels.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is
a routing protocol for multi-hop ad-hoc mesh networks. The
networks may be wired or wireless. See
http://www.open-mesh.org/ for more information and user space
tools.
This is the first submission for inclusion in staging.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
