aboutsummaryrefslogtreecommitdiff
path: root/drivers/hid
AgeCommit message (Collapse)Author
2014-07-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: "A few tiny HID subsystem fixes for 3.16" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: use multi input quirk for 22b9:2968 HID: sensor-hub: fix potential memory leak HID: usbhid: quirk for PM1610 and PM1640 Touchscreen. HID: rmi: Protect PM-only functions by #ifdef CONFIG_PM HID: sensor-hub: introduce Kconfig dependency on IOMEM HID: sensor-hub: make dyn_callback_lock IRQ-safe
2014-07-07HID: use multi input quirk for 22b9:2968Wen-chien Jesse Sung
This device generates ABS_Z and ABS_RX events instead of ABS_X and ABS_Y. Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-30HID: sensor-hub: fix potential memory leakJiri Slaby
hsdev is not freed in sensor_hub_probe when kasprintf inside the for loop fails. This is because hsdev is not set to platform_data yet (to be freed by the code in the err_no_mem label). So free the memory explicitly in the 'if' branch, as this is the only place where this is (and will) be needed. Reported-by: coverity Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: srinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-27HID: usbhid: quirk for PM1610 and PM1640 Touchscreen.John Sung
These device needs to be added to the quirks list with HID_QUIRK_NOGET, otherwise they will reset upon receiving the get input report requests. Signed-off-by: John Sung <penmount.touch@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-12HID: rmi: Protect PM-only functions by #ifdef CONFIG_PMGeert Uytterhoeven
If CONFIG_PM=n: drivers/hid/hid-rmi.c:432: warning: ‘rmi_post_reset’ defined but not used drivers/hid/hid-rmi.c:437: warning: ‘rmi_post_resume’ defined but not used Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-11Merge tag 'modules-next-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module updates from Rusty Russell: "Most of this is cleaning up various driver sysfs permissions so we can re-add the perm check (we unified the module param and sysfs checks, but the module ones were stronger so we weakened them temporarily). Param parsing gets documented, and also "--" now forces args to be handed to init (and ignored by the kernel). Module NX/RO protections get tightened: we now set them before calling parse_args()" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: module: set nx before marking module MODULE_STATE_COMING. samples/kobject/: avoid world-writable sysfs files. drivers/hid/hid-picolcd_fb: avoid world-writable sysfs files. drivers/staging/speakup/: avoid world-writable sysfs files. drivers/regulator/virtual: avoid world-writable sysfs files. drivers/scsi/pm8001/pm8001_ctl.c: avoid world-writable sysfs files. drivers/hid/hid-lg4ff.c: avoid world-writable sysfs files. drivers/video/fbdev/sm501fb.c: avoid world-writable sysfs files. drivers/mtd/devices/docg3.c: avoid world-writable sysfs files. speakup: fix incorrect perms on speakup_acntsa.c cpumask.h: silence warning with -Wsign-compare Documentation: Update kernel-parameters.tx param: hand arguments after -- straight to init modpost: Fix resource leak in read_dump()
2014-06-11HID: sensor-hub: introduce Kconfig dependency on IOMEMChen Gang
When NO_IOMEM is enabled (e.g. score architecture), some drivers which need HAS_IOMEM need notice about it, or it will report related warning: warning: (GPIO_SCH && GPIO_ICH && GPIO_VX855 && GPIO_RDC321X && IE6XX_WDT && RADIO_WL1273 && HID_SENSOR_HUB && MFD_NVEC) selects MFD_CORE which has unmet direct dependencies (HAS_IOMEM) Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-10HID: sensor-hub: make dyn_callback_lock IRQ-safeJiri Kosina
dyn_callback_lock is being taken from IRQ context through hid_irq_in() -> hid_input_report() -> sensor_hub_raw_event() -> sensor_hub_get_callback(), therefore anyone else acquiring it needs to disable IRQs to disable deadlocks. Reported-by: Alexander Holler <holler@ahsoftware.de> Tested-by: Alexander Holler <holler@ahsoftware.de> Reported-by: Reyad Attiyat <reyad.attiyat@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-04Merge branches 'for-3.16/i2c-hid', 'for-3.16/rmi4', 'for-3.16/sony' and ↵Jiri Kosina
'for-3.16/thingm' into for-linus
2014-06-04Merge branches 'for-3.15/upstream-fixes' and 'for-3.16/upstream' into for-linusJiri Kosina
Conflicts: drivers/hid/hid-sensor-hub.c
2014-06-03HID: thingm: thingm_fwinfo[] doesn't need to be globalJiri Kosina
No need to pollute global namespace by thingm_fwinfo[]. Make it static. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-03HID: core: add two new usages for digitizerPing Cheng
On Feb 17, 2014, two new usages are approved to HID usage Table 18 - Digitizer Page: 5A Secondary Barrel Switch MC 16.4 5B Transducer Serial Number SV 16.3.1 This patch adds relevant definitions to hid/input. It also removes outdated comments in hid.h. Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-02HID: hid-sensor-hub: new device id and quirk for STM Sensor hubArchana Patni
Added STM sensor hub new device id. Also added this new device in HID_SENSOR_HUB_ENUM_QUIRK to fix report descriptors. These devices uses old FW which uses logical 0 as minimum. In these, HID reports are not using proper collection classes. So we need to fix report descriptors,for such devices. This will not have any impact, if the FW uses logical 1 as minimum. Signed-off-by: Archana Patni <archana.patni@intel.com> Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-02HID: usbhid: enable NO_INIT_REPORTS quirk for Semico USB KeykoardJiri Kosina
The device which identifies itself as a "USB Keykoard" (no typo) with VID:PID 1a2c:0023 does not seem to be handling the reports initialization very well. This results in a "usb_submit_urb(ctrl) failed: -1" message from the kernel when connected, and a delay before its initialization. This patch adds the quirk for this device, which causes the delay to disappear. [jkosina@suse.cz: remove superfluous comment and fix ordering] Signed-off-by: Daniel Kamil Kozar <dkk089@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-05-28HID: hid-sensor-hub: Set report quirk for Microsoft SurfaceReyad Attiyat
Add the Microsoft Surface Pro 2 Type/Touch and default device hardware ID's Set report quirk for the device in hid-sensor-hub Signed-off-by: Reyad Attiyat <reyad.attiyat@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-05-28HID: debug: add labels for HID Sensor UsagesReyad Attiyat
Add in debugfs report descriptor labels for HID Sensor Usages. Signed-off-by: Reyad Attiyat <reyad.attiyat@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-05-27HID: uhid: Use kmemdup instead of kmalloc + memcpyBenoit Taine
This issue was reported by coccicheck using the semantic patch at scripts/coccinelle/api/memdup.cocci Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-05-22HID: rmi: do not handle touchscreens through hid-rmiBenjamin Tissoires
Currently, hid-rmi drives every Synaptics product, but the touchscreens on the Windows tablets should be handled through hid-multitouch. Instead of providing a long list of PIDs, rely on the scan_report capability to detect which should go to hid-multitouch, and which should not go to hid-rmi. related bug: https://bugzilla.kernel.org/show_bug.cgi?id=74241 https://bugzilla.redhat.com/show_bug.cgi?id=1089583 Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-05-20HID: quirk for Saitek RAT7 and MMO7 mices' mode buttonHarald Brinkmann
Some saitek mice implement a tristate button (for switching button mappings in the original driver) by keeping one of three (non-physical) buttons constantly pressed. This breaks X and probably other userspace software. This patch implements a quirk for the R.A.T.7 and M.M.O.7, tracking the mode and generating presses of a single button if it changes. Also the missing release event is generated instantly. Signed-off-by: Harald Brinkmann <hbrinkmann@braincalibration.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-05-20HID: core: fix validation of report id 0Kees Cook
Some drivers use the first HID report in the list instead of using an index. In these cases, validation uses ID 0, which was supposed to mean "first known report". This fixes the problem, which was causing at least the lgff family of devices to stop working since hid_validate_values was being called with ID 0, but the devices used single numbered IDs for their reports: 0x05, 0x01, /* Usage Page (Desktop), */ 0x09, 0x05, /* Usage (Gamepad), */ 0xA1, 0x01, /* Collection (Application), */ 0xA1, 0x02, /* Collection (Logical), */ 0x85, 0x01, /* Report ID (1), */ ... Cc: stable@vger.kernel.org Reported-by: Simon Wood <simon@mungewell.org> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-05-16HID: rmi: fix masks for x and w_x dataAndrew Duggan
The F11 data in the HID report contains four bits of data for w_x and the least significant bits of x. Currently only the first three bits are being used which is resulting in small jumps in the position data on the x axis and in the w_x data. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-05-14drivers/hid/hid-picolcd_fb: avoid world-writable sysfs files.Rusty Russell
In line with practice for module parameters, we're adding a build-time check that sysfs files aren't world-writable. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Bruno Prémont <bonbons@linux-vserver.org> Acked-by: Jiri Kosina <jkosina@suse.cz>
2014-05-14drivers/hid/hid-lg4ff.c: avoid world-writable sysfs files.Rusty Russell
In line with practice for module parameters, we're adding a build-time check that sysfs files aren't world-writable. Cc: Simon Wood <simon@mungewell.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-05-13HID: rmi: fix wrong struct field nameJiri Kosina
x_size_mm should be y_size_mm, otherwise neither the duplicated condition nor the assignment make any sense whatsoever. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-05-13HID: rmi: do not fetch more than 16 bytes in a queryBenjamin Tissoires
A firmware bug is present on the XPS Haswell edition which silently split the request in two responses when the caller ask for a read of more than 16 bytes. The FW sends the first 16 then the 4 next, but it says that it answered the 20 bytes in the first report. This occurs only on the retrieving of the min/max of X and Y of the F11 function. We only use the first 10 bytes of the Ctrl register, so we can get only those 10 bytes to prevent the bug from happening. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1090161 Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-05-13HID: rmi: check for the existence of some optional queries before reading ↵Andrew Duggan
query 12 The rmi4 spec defines some optional query registers in F11 which appear before query 12. This patch checks for the existence of some of the lesser used queries to compute the location of query12 and all subsequent query registers. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-05-13HID: i2c-hid: hid report descriptor retrieval changesArchana Patni
Reading the partial HID Descriptor is causing a firmware lockup in some sensor hubs. Instead of a partial read, this patch implements the i2c hid fetch using a fixed descriptor size (30 bytes) followed by a verification of the BCDVersion (V01.00), and value stored in wHIDDescLength (30 Bytes) for V1.00 descriptors. As per i2c hid spec, this is the preferred model. From hid-over-i2c-protocol-spec-v1-0: There are a variety of ways a HOST may choose to retrieve the HID Descriptor from the DEVICE. The following is a preferred implementation but should not be considered the only implementation. A HOST may read the entire HID Descriptor in a single read by issuing a read for 30 Bytes to get the entire HID Descriptor from the DEVICE.However, the HOST is responsible for validating that 1. The BCDVersion is V01.00 (later revisions may have different descriptor lengths), and 2. The value stored in wHIDDescLength is 30 (Bytes) for V1.00 descriptors. Reported-by: Joe Tijerina <joe.tijerina@st.com> Signed-off-by: Archana Patni <archana.patni@intel.com> Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-05-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - fix a small bug in computation of report size, which might cause some devices (Atmel touchpad found on the Samsung Ativ 9) to reject reports with otherwise valid contents - a few device-ID specific quirks/additions piggy-backing on top of it * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: sensor-hub: Add in quirk for sensor hub in Lenovo Ideapad Yogas HID: add NO_INIT_REPORTS quirk for Synaptics Touch Pad V 103S HID: core: fix computation of the report size HID: multitouch: add support of EliteGroup 05D8 panels
2014-05-06HID: sensor-hub: Add in quirk for sensor hub in Lenovo Ideapad YogasPeter F. Patel-Schneider
The sensor hub in Lenovo Yogas needs the enumeration quirk. I've been running the patch for over a month with no problems, whereas the unpatched drivers reliably mis-initialized the sensors. Signed-off-by: Peter F. Patel-Schneider <pfpschneider@gmail.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-05-05HID: add NO_INIT_REPORTS quirk for Synaptics Touch Pad V 103SHans de Goede
This touchpad seriously dislikes init reports, not only timeing out, but also refusing to work after this. Cc: stable@vger.kernel.org Reported-and-tested-by: Vincent Fortier <th0ma7@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-05-05HID: core: fix computation of the report sizeBenjamin Tissoires
The extra seven bits are only required when allocating the report buffer. We can not use those extra bytes for the length of the report in the generic implementation of .request because the device might (will) refuse the set_report command. This has been verified on the Atmel touchpad found on the Samsung Ativ 9 plus, which uses hid-multitouch and HID over I2C. Without this fix, the device refuses to switch to the multitouch mode, and it becomes unresponsive from the user point of view. Actually, this has been discussed during the initial submission of the commit 4fa5a7f76cc7b6ac87f57741edd2b124851d119f, see https://patchwork.kernel.org/patch/3621751/ Unfortunately, I completely forgot about it later. Reported-by: Matthias Bayer <thematthiasbayer@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-28HID: add missing hid usagesOlivier Gay
Add some missing hid usages from consumer page, add some display brightness control usages from approved hid usage table request HUTTR41: http://www.usb.org/developers/hidpage/HUTRR41.pdf and add voice command usage from approved request HUTTR45: http://www.usb.org/developers/hidpage/Voice_Command_Usage.pdf [jkosina@suse.cz: removed KEY_BRIGHTNESS_TOGGLE / KEY_DISPLAYTOGGLE conflict from hid-debug.c] Signed-off-by: Olivier Gay <ogay@logitech.com> Signed-off-by: Mathieu Meisser <mmeisser@logitech.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-24HID: hid-sony - allow 3rd party INTEC controller to turn off all ledsSimon Wood
Without this patch the 3rd party INTEC (PS3) controller will blink all leds when user turns them off, it appears to require an extra flag set. Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-24HID: sony: Add blink support to the Sixaxis and DualShock 4 LEDsFrank Praznik
Add support for setting the blink rate of the LEDs. The Sixaxis allows control over each individual LED, but the Dualshock 4 only has one global control for controlling the hardware blink rate so individual colors will fall back to software timers. Setting the brightness cancels the blinking as per the LED class specifications. The Sixaxis and Dualshock 4 controllers accept delays in decisecond increments from 0 to 255 (2550 milliseconds). The value at index 1 of the DualShock 4 USB output report must be 0xFF or the light bar won't blink. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-24HID: sony: Initialize the controller LEDs with a device ID valueFrank Praznik
Add an IDA id allocator to assign unique, sequential device ids to Sixaxis and DualShock 4 controllers. Use the device ID to initialize the Sixaxis and DualShock 4 controller LEDs to default values. The number or color of the controller is set relative to other connected Sony controllers. Set the LED class brightness values to the initial values and add the new led to the array before calling led_classdev_register so that the correct brightness value shows up in the LED sysfs entry. Use explicit module init and exit functions since the IDA allocator must be manually destroyed when the module is unloaded. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-24HID: sony: Use the controller Bluetooth MAC address as the unique value in ↵Frank Praznik
the battery name string Use the controller Bluetooth MAC address as the unique identifier in the battery name string instead of the atomic integer that was used before. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-24HID: sony: Convert startup and shutdown functions to use a uniform parameter ↵Frank Praznik
type Convert all of the local initialization and shutdown functions to take a parameter type of struct sony_sc* instead of using a mix of struct sony_sc* and struct hid_device*. Allows for the removal of some calls to hid_get_drvdata(). Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-24HID: sony: Use a struct for the Sixaxis output report.Frank Praznik
Use a struct for the Sixaxis output report that uses named members to set the report fields. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-24HID: sony: Use inliners for work queue initialization and cancellationFrank Praznik
Use inliners to make sure that the work queue initialization flag is always checked and set correctly when initializing or cancelling the work queue. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-24HID: multitouch: add support of EliteGroup 05D8 panelsTomas Sokorai
They need to have the class SERIAL. Note: it is a Win 7 panel, not Win 8 certified. Signed-off-by: Tomas Sokorai <tsokorai@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - fix for merge window mismerge in hid-sony, from Frank Praznik - fix for Surface Type/Touch Cover 2 device, from Benjamin Tissoires - quirk for ThinkPad Helix sensor hub from Stephen Chandler Paul * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: core: do not scan constant input report Revert "HID: microsoft: Add ID's for Surface Type/Touch Cover 2" HID: sensor-hub: add sensor hub quirk for ThinkPad Helix HID: sony: Fix cancel_work_sync mismerge
2014-04-15HID: thingm: add support for blink(1) mk2Vivien Didelot
The blink(1) mk2 is a new version of the blink(1) USB RGB LED. The new generation has 2 individually-controllable RGB chips. This patch adds support for this device to the thingm driver, which registers 3 new standard LED class instances for the second RGB chip. Note that the 'n' (set) command does not support setting a color for a single RGB chip, so it was changed to 'c' (fade) with a timeout of 0. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-15HID: thingm: refactor blink(1) supportVivien Didelot
This patch refactors the way the thingm driver registers a blink(1) LED. In order to make the driver simpler and more standard, drop the "rgb" sysfs attribute and create one instance of LED class per RGB channel. Actually, the name of the LED class instance registered for a blink(1) device is "blink1::ABCD", where ABCD is the last 4 chars of the serial number. The driver now registers 3 instances per RGB chip, named "thingmX:{red,green,blue}:ledY" where X is the hidraw minor number and Y is the RGB chip number (as seen by the firmware). This patch also uses work queues to defer calls with the device, which now allows triggers to work as expected with this LED device. Also remove the brightness structure field and the brightness_get backend, as it is already handled by the LED class, and changes the prefix of functions and structures to thingm_ to match the driver name. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-15HID: thingm: remove the "fade" sysfs attributeVivien Didelot
As for the "play" sysfs attribute, remove this other non-standard attribute, so the driver only implements what is required to switch the LED on and off. Thus, a fade time won't be ideal for some fast-changing triggers. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-15HID: thingm: remove the "play" sysfs attributeVivien Didelot
When the thingm driver registers an instance of LED class, it creates a "play" sysfs attribute for this blink(1) specific feature. Since this feature is not specific to the RGB chip but to the HID device itself, let's remove this attribute from the LED instance and only implement what is useful to switch on and off the LED. This feature is still easily accessible through hidraw. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-09HID: rmi: do not stop the device at the end of probeBenjamin Tissoires
Well, this is embarrassing, if the device is stopped at the end of probe, we get into big trouble. This was a leftover of an attempt to be smart when sending the patch, I deeply apologies. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-09HID: rmi: introduce RMI driver for Synaptics touchpadsBenjamin Tissoires
This driver add support for RMI4 over USB or I2C. The current state is that it uses its own RMI4 implementation, but once RMI4 is merged upstream, the driver will be a transport driver for the RMI4 library. Part of this driver should be considered as temporary. Most of the RMI4 processing and input handling will be deleted at some point. I based my work on Andrew's regarding its port of RMI4 over HID (see https://github.com/mightybigcar/synaptics-rmi4/tree/rmihid ) This repo presents how the driver may looks like at the end: https://github.com/mightybigcar/synaptics-rmi4/blob/rmihid/drivers/input/rmi4/rmi_hid.c Without this temporary solution, the workaround we gave to users is to disable i2c-hid, which leads to disabling the touchscreen on the XPS 11 and 12 (Haswell generation). Related bugs: https://bugzilla.redhat.com/show_bug.cgi?id=1048314 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1218973 Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-07HID: core: do not scan constant input reportBenjamin Tissoires
The Microsoft Surface Type/Touch Cover 2 is a fancy device which advertised itself as a multitouch device but with constant input reports. This way, hid_scan_report() gives the group MULTITOUCH to it, but hid-multitouch can not handle it due to the constant collection ignored by hid-input. To prevent such crap in the future, and while we do not fix this particular device, make the scan_report coherent with hid-input.c, and ignore constant input reports. CC: stable@vger.kernel.org # 3.12+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-07Revert "HID: microsoft: Add ID's for Surface Type/Touch Cover 2"Derya
This reverts commit 117309c51dca42121f70cacec801511b76acf75c. The MS Surface Pro 2 has an USB composite device with 3 interfaces - interface 0 - sensor hub - interface 1 - wacom digitizer - interface 2 - the keyboard cover, if one is attached This USB composite device changes it product id dependent on if and which keyboard cover is attached. Adding the covers to hid_have_special_driver prevents loading the right hid drivers for the other two interfaces, all 3 get loaded with hid-microsoft. We don't even need hid-microsoft for the keyboards. We have to revert this to load the right hid modules for each interface. CC: stable@vger.kernel.org # kernel 3.14 only Signed-off-by: Derya <derya.kiran@yahoo.de> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-04Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "The main set of series of patches for media subsystem, including: - document RC sysfs class - added an API to setup scancode to allow waking up systems using the Remote Controller - add API for SDR devices. Drivers are still on staging - some API improvements for getting EDID data from media inputs/outputs - new DVB frontend driver for drx-j (ATSC) - one driver (it913x/it9137) got removed, in favor of an improvement on another driver (af9035) - added a skeleton V4L2 PCI driver at documentation - added a dual flash driver (lm3646) - added a new IR driver (img-ir) - added an IR scancode decoder for the Sharp protocol - some improvements at the usbtv driver, to allow its core to be reused. - added a new SDR driver (rtl2832u_sdr) - added a new tuner driver (msi001) - several improvements at em28xx driver to fix PM support, device removal and to split the V4L2 specific bits into a separate sub-driver - one driver got converted to videobuf2 (s2255drv) - the e4000 tuner driver now follows an improved binding model - some fixes at V4L2 compat32 code - several fixes and enhancements at videobuf2 code - some cleanups at V4L2 API documentation - usual driver enhancements, new board additions and misc fixups" [ NOTE! This merge effective drops commit 4329b93b283c ("of: Reduce indentation in of_graph_get_next_endpoint"). The of_graph_get_next_endpoint() function was moved and renamed by commit fd9fdb78a9bf ("[media] of: move graph helpers from drivers/media/v4l2-core to drivers/of"). It was originally called v4l2_of_get_next_endpoint() and lived in the file drivers/media/v4l2-core/v4l2-of.c. In that original location, it was then fixed to support empty port nodes by commit b9db140c1e46 ("[media] v4l: of: Support empty port nodes"), and that commit clashes badly with the dropped "Reduce intendation" commit. I had to choose one or the other, and decided that the "Support empty port nodes" commit was more important ] * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (426 commits) [media] em28xx-dvb: fix PCTV 461e tuner I2C binding Revert "[media] em28xx-dvb: fix PCTV 461e tuner I2C binding" [media] em28xx: fix PCTV 290e LNA oops [media] em28xx-dvb: fix PCTV 461e tuner I2C binding [media] m88ds3103: fix bug on .set_tone() [media] saa7134: fix WARN_ON during resume [media] v4l2-dv-timings: add module name, description, license [media] videodev2.h: add parenthesis around macro arguments [media] saa6752hs: depends on CRC32 [media] si4713: fix Kconfig dependencies [media] Sensoray 2255 uses videobuf2 [media] adv7180: free an interrupt on failure paths in init_device() [media] e4000: make VIDEO_V4L2 dependency optional [media] af9033: Don't export functions for the hardware filter [media] af9035: use af9033 PID filters [media] af9033: implement PID filter [media] rtl2832_sdr: do not use dynamic stack allocation [media] e4000: fix 32-bit build error [media] em28xx-audio: make sure audio is unmuted on open() [media] DocBook media: v4l2_format_sdr was renamed to v4l2_sdr_format ...
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-22 22:07:01 +0000