aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Expand)Author
2014-02-10ARM: dts: imx6q: Add spi4 aliasSascha Hauer
2014-02-10ARM: dts: imx6qdl-sabreauto: Add LVDS supportFabio Estevam
2014-02-10ARM: dts: imx6sl: add keypad support for i.mx6sl-evk board.Anson Huang
2014-02-10ARM: dts: imx6sl: add ocram device supportAnson Huang
2014-02-10ARM: dts: imx6qdl: enable dma for spiFrank Li
2014-02-10ARM: dts: imx6qdl-sabresd: Add PFUZE100 supportFabio Estevam
2014-02-10ARM: dts: imx6: add mxs phy controller idPeter Chen
2014-02-10ARM: dts: imx6: add anatop phandle for usbphyPeter Chen
2014-02-10ARM: dts: imx6q-arm2: use GPIO_6 for FEC interrupt.Troy Kisky
2014-02-10ARM: dts: imx6qdl-sabreauto: use GPIO_6 for FEC interrupt.Troy Kisky
2014-02-10ARM: dts: imx6qdl-sabrelite: use GPIO_6 for FEC interrupt.Troy Kisky
2014-02-10ARM: dts: i.MX51 babbage: Support diagnostic LEDLiu Ying
2014-02-10ARM: dts: imx28-tx28: Remove 'enable-active-low' propertyFabio Estevam
2014-02-10ARM: dts: mx53: Remove 'enable-active-low' propertyFabio Estevam
2014-02-10ARM: dts: imx27-phytec-phycard-s-rdk: Add pinctrl definitions for SDHC2Alexander Shiyan
2014-02-10ARM: dts: imx27-phytec-phycard-s-som: Add NFC nodeAlexander Shiyan
2014-02-10ARM: dts: imx27-phytec-phycard-s-som: Sort entriesAlexander Shiyan
2014-02-09ARM: dts: imx28-m28cu3: Remove 'reset-active-high'Fabio Estevam
2014-02-09ARM: dts: imx5: use imx51-ssiMarkus Pargmann
2014-02-09ARM: dts: imx51: Add mmc aliasesSascha Hauer
2014-02-09ARM: dts: imx53: Add mmc aliasesSascha Hauer
2014-02-09ARM: dts: imx53: add support for Ka-Ro TX53 modulesLothar Waßmann
2014-02-09ARM: dts: Add support for the cpuimx35 board from Eukrea and its baseboard.Denis Carikli
2014-02-09ARM: dts: imx28-apf28dev: add user buttonSébastien Szymanski
2014-02-09ARM: dts: i.MX51: Switch to use standard definitions for input subsystemAlexander Shiyan
2014-02-09ARM: dts: i.MX53: add support for MCIMX53-START-RSteffen Trumtrar
2014-02-09ARM: dts: i.MX53: move common QSB nodes to new fileSteffen Trumtrar
2014-02-09ARM: dts: imx53-evk: Remove board supportAlexander Shiyan
2014-02-09ARM: dts: vf610: use the interrupt macrosHuang Shijie
2014-02-09ARM: dts: imx53: Add gpio and input dt includes.Denis Carikli
2014-02-09ARM: dts: i.MX27: Add SSI nodesAlexander Shiyan
2014-02-09ARM: dts: mxs: add mxs phy controller idPeter Chen
2014-02-09ARM: dts: imx27-phytec-phycore-rdk: Add pinctrl definitions for WEIMAlexander Shiyan
2014-02-09ARM: dts: imx27-phytec-phycore-rdk: Add pingrp for SDHCAlexander Shiyan
2014-02-09ARM: dts: imx27-phytec-phycore-som: Add spi-cs-high property to PMICAlexander Shiyan
2014-02-09ARM: dts: imx27-phytec-phycore-rdk: Enable 1-Wire moduleAlexander Shiyan
2014-02-09ARM: dts: imx27-phytec-phycore-som: Add NFC pin groupAlexander Shiyan
2014-02-09ARM: dts: Add support for the i.MX35.Steffen Trumtrar
2014-02-09ARM: dts: mxs: Add iio-hwmon to mx23 socAlexandre Belloni
2014-02-09ARM: dts: mxs: Add iio-hwmon to mx28 socAlexandre Belloni
2014-02-09ARM: dts: imx27-phytec-phycore-som: Rename file to .dtsiAlexander Shiyan
2014-02-09ARM: dts: imx27-phytec-phycore-som: Add pinctrl for CSPI1 and GPIOs used on m...Alexander Shiyan
2014-02-09ARM: dts: mxs: add #io-channel-cells to mx28 lradcAlexandre Belloni
2014-02-09ARM: i.MX28: dts: rename usbphy pin namesMichael Grzeschik
2014-02-09ARM: dts: Add support for the cpuimx25 board from Eukrea and its baseboard.Denis Carikli
2014-02-09ARM: mxs: Add support for the eukrea-cpuimx28.Eric Bénard
2014-02-09ARM: dts: mxs: Add a new pin config for the usb0 ID.Denis Carikli
2014-02-09ARM: dts: mxs: Add 18bit pin config for lcdif.Denis Carikli
2014-02-09ARM: dts: imx53: Enable AHCI SATA for imx53-qsbRobert Nelson
2014-02-09ARM: dts: i.MX27: Configure GPIOs as "input" by defaultAlexander Shiyan
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2026-03-22 21:43:37 +0000