166 files changed, 885 insertions, 493 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 73067efd484..bbd48cc1ad2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -5,8 +5,9 @@ config ARM
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select ARCH_HAVE_CUSTOM_GPIO_H
 	select ARCH_WANT_IPC_PARSE_VERSION
+	select BUILDTIME_EXTABLE_SORT if MMU
 	select CPU_PM if (SUSPEND || CPU_IDLE)
-	select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN
+	select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN && MMU
 	select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI)
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
 	select GENERIC_IRQ_PROBE
@@ -21,6 +22,7 @@ config ARM
 	select HAVE_AOUT
 	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
 	select HAVE_ARCH_KGDB
+	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_BPF_JIT
 	select HAVE_C_RECORDMCOUNT
@@ -1603,8 +1605,8 @@ config NR_CPUS
 	default "4"
 
 config HOTPLUG_CPU
-	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
-	depends on SMP && HOTPLUG && EXPERIMENTAL
+	bool "Support for hot-pluggable CPUs"
+	depends on SMP && HOTPLUG
 	help
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
 	  can be controlled through /sys/devices/system/cpu.
@@ -1645,8 +1647,8 @@ config HZ
 	default 100
 
 config THUMB2_KERNEL
-	bool "Compile the kernel in Thumb-2 mode (EXPERIMENTAL)"
-	depends on CPU_V7 && !CPU_V6 && !CPU_V6K && EXPERIMENTAL
+	bool "Compile the kernel in Thumb-2 mode"
+	depends on CPU_V7 && !CPU_V6 && !CPU_V6K
 	select AEABI
 	select ARM_ASM_UNIFIED
 	select ARM_UNWIND
@@ -1850,6 +1852,7 @@ config XEN_DOM0
 config XEN
 	bool "Xen guest support on ARM (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && ARM && OF
+	depends on CPU_V7 && !CPU_V6
 	help
 	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
 
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index f023e3acdfb..03363e202a5 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -21,8 +21,6 @@ endif
 OBJCOPYFLAGS	:=-O binary -R .comment -S
 GZFLAGS		:=-9
 #KBUILD_CFLAGS	+=-pipe
-# Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb:
-KBUILD_CFLAGS	+=$(call cc-option,-marm,)
 
 # Never generate .eh_frame
 KBUILD_CFLAGS	+= $(call cc-option,-fno-dwarf2-cfi-asm)
@@ -34,6 +32,7 @@ KBUILD_DEFCONFIG := versatile_defconfig
 # defines filename extension depending memory management type.
 ifeq ($(CONFIG_MMU),)
 MMUEXT		:= -nommu
+KBUILD_CFLAGS	+= $(call cc-option,-mno-unaligned-access)
 endif
 
 ifeq ($(CONFIG_FRAME_POINTER),y)
@@ -105,17 +104,20 @@ endif
 ifeq ($(CONFIG_THUMB2_KERNEL),y)
 AFLAGS_AUTOIT	:=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it)
 AFLAGS_NOWARN	:=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
-CFLAGS_THUMB2	:=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
-AFLAGS_THUMB2	:=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb
+CFLAGS_ISA	:=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
+AFLAGS_ISA	:=$(CFLAGS_ISA) -Wa$(comma)-mthumb
 # Work around buggy relocation from gas if requested:
 ifeq ($(CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11),y)
 CFLAGS_MODULE	+=-fno-optimize-sibling-calls
 endif
+else
+CFLAGS_ISA	:=$(call cc-option,-marm,)
+AFLAGS_ISA	:=$(CFLAGS_ISA)
 endif
 
 # Need -Uarm for gcc < 3.x
-KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(CFLAGS_THUMB2) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
-KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_THUMB2) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
+KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
+KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_ISA) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
 
 CHECKFLAGS	+= -D__arm__
 
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 3fdab016aa5..9137df539b6 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -33,7 +33,7 @@ ifeq ($(CONFIG_XIP_KERNEL),y)
 
 $(obj)/xipImage: vmlinux FORCE
 	$(call if_changed,objcopy)
-	@echo '  Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))'
+	@$(kecho) '  Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))'
 
 $(obj)/Image $(obj)/zImage: FORCE
 	@echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)'
@@ -48,14 +48,14 @@ $(obj)/xipImage: FORCE
 
 $(obj)/Image: vmlinux FORCE
 	$(call if_changed,objcopy)
-	@echo '  Kernel: $@ is ready'
+	@$(kecho) '  Kernel: $@ is ready'
 
 $(obj)/compressed/vmlinux: $(obj)/Image FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
 
 $(obj)/zImage:	$(obj)/compressed/vmlinux FORCE
 	$(call if_changed,objcopy)
-	@echo '  Kernel: $@ is ready'
+	@$(kecho) '  Kernel: $@ is ready'
 
 endif
 
@@ -90,7 +90,7 @@ fi
 $(obj)/uImage:	$(obj)/zImage FORCE
 	@$(check_for_multiple_loadaddr)
 	$(call if_changed,uimage)
-	@echo '  Image $@ is ready'
+	@$(kecho) '  Image $@ is ready'
 
 $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/bootp $@
@@ -98,7 +98,7 @@ $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
 
 $(obj)/bootpImage: $(obj)/bootp/bootp FORCE
 	$(call if_changed,objcopy)
-	@echo '  Kernel: $@ is ready'
+	@$(kecho) '  Kernel: $@ is ready'
 
 PHONY += initrd FORCE
 initrd:
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 90275f036cd..49ca86e37b8 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -652,6 +652,15 @@ __setup_mmu:	sub	r3, r4, #16384		@ Page directory size
 		mov	pc, lr
 ENDPROC(__setup_mmu)
 
+@ Enable unaligned access on v6, to allow better code generation
+@ for the decompressor C code:
+__armv6_mmu_cache_on:
+		mrc	p15, 0, r0, c1, c0, 0	@ read SCTLR
+		bic	r0, r0, #2		@ A (no unaligned access fault)
+		orr	r0, r0, #1 << 22	@ U (v6 unaligned access model)
+		mcr	p15, 0, r0, c1, c0, 0	@ write SCTLR
+		b	__armv4_mmu_cache_on
+
 __arm926ejs_mmu_cache_on:
 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
 		mov	r0, #4			@ put dcache in WT mode
@@ -694,6 +703,9 @@ __armv7_mmu_cache_on:
 		bic	r0, r0, #1 << 28	@ clear SCTLR.TRE
 		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
 		orr	r0, r0, #0x003c		@ write buffer
+		bic	r0, r0, #2		@ A (no unaligned access fault)
+		orr	r0, r0, #1 << 22	@ U (v6 unaligned access model)
+						@ (needed for ARM1176)
 #ifdef CONFIG_MMU
 #ifdef CONFIG_CPU_ENDIAN_BE8
 		orr	r0, r0, #1 << 25	@ big-endian page tables
@@ -914,7 +926,7 @@ proc_types:
 
 		.word	0x0007b000		@ ARMv6
 		.word	0x000ff000
-		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv6_mmu_cache_on
 		W(b)	__armv4_mmu_cache_off
 		W(b)	__armv6_mmu_cache_flush
 
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index c1ce813fcc4..f37cf9fa5fa 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -25,6 +25,8 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos4210-trats.dtb \
 	exynos5250-smdk5250.dtb
 dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb
+dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
+	integratorcp.dtb
 dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
 dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
 	kirkwood-dns325.dtb \
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index b06c0db273b..e6391a4e664 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -126,14 +126,14 @@
 		#size-cells = <0>;
 
 		btn3 {
-			label = "Buttin 3";
+			label = "Button 3";
 			gpios = <&pioA 30 1>;
 			linux,code = <0x103>;
 			gpio-key,wakeup;
 		};
 
 		btn4 {
-			label = "Buttin 4";
+			label = "Button 4";
 			gpios = <&pioA 31 1>;
 			linux,code = <0x104>;
 			gpio-key,wakeup;
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index 748ba7aa746..4b0e0ca08f4 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -483,6 +483,8 @@
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80004000 0x1000>;
 			interrupts = <0 21 0x4>;
+			arm,primecell-periphid = <0x180024>;
+
 			#address-cells = <1>;
 			#size-cells = <0>;
 			v-i2c-supply = <&db8500_vape_reg>;
@@ -494,6 +496,8 @@
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80122000 0x1000>;
 			interrupts = <0 22 0x4>;
+			arm,primecell-periphid = <0x180024>;
+
 			#address-cells = <1>;
 			#size-cells = <0>;
 			v-i2c-supply = <&db8500_vape_reg>;
@@ -505,6 +509,8 @@
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80128000 0x1000>;
 			interrupts = <0 55 0x4>;
+			arm,primecell-periphid = <0x180024>;
+
 			#address-cells = <1>;
 			#size-cells = <0>;
 			v-i2c-supply = <&db8500_vape_reg>;
@@ -516,6 +522,8 @@
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80110000 0x1000>;
 			interrupts = <0 12 0x4>;
+			arm,primecell-periphid = <0x180024>;
+
 			#address-cells = <1>;
 			#size-cells = <0>;
 			v-i2c-supply = <&db8500_vape_reg>;
@@ -527,6 +535,8 @@
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x8012a000 0x1000>;
 			interrupts = <0 51 0x4>;
+			arm,primecell-periphid = <0x180024>;
+
 			#address-cells = <1>;
 			#size-cells = <0>;
 			v-i2c-supply = <&db8500_vape_reg>;
@@ -573,33 +583,38 @@
 			interrupts = <0 60 0x4>;
 			status = "disabled";
 		};
+
 		sdi@80118000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80118000 0x1000>;
 			interrupts = <0 50 0x4>;
 			status = "disabled";
 		};
+
 		sdi@80005000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80005000 0x1000>;
 			interrupts = <0 41 0x4>;
 			status = "disabled";
 		};
+
 		sdi@80119000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80119000 0x1000>;
 			interrupts = <0 59 0x4>;
 			status = "disabled";
 		};
+
 		sdi@80114000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80114000 0x1000>;
 			interrupts = <0 99 0x4>;
 			status = "disabled";
 		};
+
 		sdi@80008000 {
 			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x80114000 0x1000>;
+			reg = <0x80008000 0x1000>;
 			interrupts = <0 100 0x4>;
 			status = "disabled";
 		};
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 96fb824b5e6..5a00022383e 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -4,21 +4,32 @@
 	compatible = "marvell,dove";
 	model = "Marvell Armada 88AP510 SoC";
 
-	interrupt-parent = <&intc>;
-
-	intc: interrupt-controller {
-		compatible = "marvell,orion-intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0xf1020204 0x04>,
-		      <0xf1020214 0x04>;
-	};
-
-	mbus@f1000000 {
+	soc@f1000000 {
 		compatible = "simple-bus";
-		ranges = <0 0xf1000000 0x4000000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+
+		ranges = <0xc8000000 0xc8000000 0x0100000   /* CESA SRAM   1M */
+		          0xe0000000 0xe0000000 0x8000000   /* PCIe0 Mem 128M */
+		          0xe8000000 0xe8000000 0x8000000   /* PCIe1 Mem 128M */
+		          0xf0000000 0xf0000000 0x0100000   /* ScratchPad  1M */
+		          0x00000000 0xf1000000 0x1000000   /* SB/NB regs 16M */
+		          0xf2000000 0xf2000000 0x0100000   /* PCIe0 I/O   1M */
+		          0xf2100000 0xf2100000 0x0100000   /* PCIe0 I/O   1M */
+		          0xf8000000 0xf8000000 0x8000000>; /* BootROM   128M */
+
+		l2: l2-cache {
+			compatible = "marvell,tauros2-cache";
+			marvell,tauros2-cache-features = <0>;
+		};
+
+		intc: interrupt-controller {
+			compatible = "marvell,orion-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x20204 0x04>, <0x20214 0x04>;
+		};
 
 		uart0: serial@12000 {
 			compatible = "ns16550a";
@@ -56,11 +67,6 @@
 			status = "disabled";
 		};
 
-		wdt: wdt@20300 {
-			compatible = "marvell,orion-wdt";
-			reg = <0x20300 0x28>;
-		};
-
 		gpio0: gpio@d0400 {
 			compatible = "marvell,orion-gpio";
 			#gpio-cells = <2>;
@@ -139,5 +145,14 @@
 			nr-ports = <1>;
 			status = "disabled";
 		};
+
+		crypto: crypto@30000 {
+			compatible = "marvell,orion-crypto";
+			reg = <0x30000 0x10000>,
+			      <0xc8000000 0x800>;
+			reg-names = "regs", "sram";
+			interrupts = <31>;
+			status = "okay";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 73567b843e7..a21511c1407 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -20,8 +20,10 @@
 	compatible = "samsung,trats", "samsung,exynos4210";
 
 	memory {
-		reg =  <0x40000000 0x20000000
-			0x60000000 0x20000000>;
+		reg =  <0x40000000 0x10000000
+			0x50000000 0x10000000
+			0x60000000 0x10000000
+			0x70000000 0x10000000>;
 	};
 
 	chosen {
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index 9ca4ca70c1b..6d31aa38346 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -69,6 +69,7 @@
 				interrupts = <13>, <56>;
 				interrupt-names = "gpmi-dma", "bch";
 				clocks = <&clks 34>;
+				clock-names = "gpmi_io";
 				fsl,gpmi-dma-channel = <4>;
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index e16d6315548..55c57ea6169 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -85,6 +85,7 @@
 				interrupts = <88>, <41>;
 				interrupt-names = "gpmi-dma", "bch";
 				clocks = <&clks 50>;
+				clock-names = "gpmi_io";
 				fsl,gpmi-dma-channel = <4>;
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index 15df4c105e8..5bfa02a3f85 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -37,6 +37,13 @@
 					pinctrl_hog: hoggrp {
 						fsl,pins = <
 							176  0x80000000	/* MX6Q_PAD_EIM_D25__GPIO_3_25 */
+						>;
+					};
+				};
+
+				arm2 {
+					pinctrl_usdhc3_arm2: usdhc3grp-arm2 {
+						fsl,pins = <
 							1363 0x80000000	/* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */
 							1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */
 						>;
@@ -58,7 +65,8 @@
 				wp-gpios = <&gpio6 14 0>;
 				vmmc-supply = <&reg_3p3v>;
 				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usdhc3_1>;
+				pinctrl-0 = <&pinctrl_usdhc3_1
+					     &pinctrl_usdhc3_arm2>;
 				status = "okay";
 			};
 
diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
index 8ac51c08269..8fea375c734 100644
--- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
@@ -48,17 +48,19 @@
 		#size-cells = <0>;
 		button@1 {
 			label = "Function Button";
-			linux,code = <132>;
+			linux,code = <357>;
 			gpios = <&gpio1 9 1>;
 		};
 		button@2 {
 			label = "Power-on Switch";
-			linux,code = <116>;
+			linux,code = <0>;
+			linux,input-type = <5>;
 			gpios = <&gpio1 10 1>;
 		};
 		button@3 {
 			label = "Power-auto Switch";
-			linux,code = <142>;
+			linux,code = <1>;
+			linux,input-type = <5>;
 			gpios = <&gpio1 11 1>;
 		};
 	};
@@ -67,28 +69,28 @@
 		compatible = "gpio-leds";
 
 		led@1 {
-			label = "lschlv2:blue:func";
+			label = "lsxl:blue:func";
 			gpios = <&gpio1 4 1>;
 		};
 
 		led@2 {
-			label = "lschlv2:red:alarm";
+			label = "lsxl:red:alarm";
 			gpios = <&gpio1 5 1>;
 		};
 
 		led@3 {
-			label = "lschlv2:amber:info";
+			label = "lsxl:amber:info";
 			gpios = <&gpio1 6 1>;
 		};
 
 		led@4 {
-			label = "lschlv2:blue:power";
+			label = "lsxl:blue:power";
 			gpios = <&gpio1 7 1>;
 			linux,default-trigger = "default-on";
 		};
 
 		led@5 {
-			label = "lschlv2:red:func";
+			label = "lsxl:red:func";
 			gpios = <&gpio1 16 1>;
 		};
 	};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index f38ea8771b4..696e929d030 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -257,7 +257,7 @@
 			interrupt-names = "common", "tx", "rx", "sidetone";
 			interrupt-parent = <&intc>;
 			ti,buffer-size = <1280>;
-			ti,hwmods = "mcbsp2";
+			ti,hwmods = "mcbsp2", "mcbsp2_sidetone";
 		};
 
 		mcbsp3: mcbsp@49024000 {
@@ -272,7 +272,7 @@
 			interrupt-names = "common", "tx", "rx", "sidetone";
 			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp3";
+			ti,hwmods = "mcbsp3", "mcbsp3_sidetone";
 		};
 
 		mcbsp4: mcbsp@49026000 {
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index b1497c7d7d6..df7f2270fc9 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -73,8 +73,8 @@
 
 	pinmux: pinmux {
 		compatible = "nvidia,tegra30-pinmux";
-		reg = <0x70000868 0xd0    /* Pad control registers */
-		       0x70003000 0x3e0>; /* Mux registers */
+		reg = <0x70000868 0xd4    /* Pad control registers */
+		       0x70003000 0x3e4>; /* Mux registers */
 	};
 
 	serial@70006000 {
diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi
index b459691655a..330f833ac3b 100644
--- a/arch/arm/boot/dts/wm8505.dtsi
+++ b/arch/arm/boot/dts/wm8505.dtsi
@@ -71,13 +71,13 @@
 		ehci@d8007100 {
 			compatible = "via,vt8500-ehci";
 			reg = <0xd8007100 0x200>;
-			interrupts = <43>;
+			interrupts = <1>;
 		};
 
 		uhci@d8007300 {
 			compatible = "platform-uhci";
 			reg = <0xd8007300 0x200>;
-			interrupts = <43>;
+			interrupts = <0>;
 		};
 
 		fb@d8050800 {
diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c
index df13a3ffff3..9d2d3ba339f 100644
--- a/arch/arm/common/timer-sp.c
+++ b/arch/arm/common/timer-sp.c
@@ -162,7 +162,6 @@ static struct clock_event_device sp804_clockevent = {
 	.set_mode	= sp804_set_mode,
 	.set_next_event	= sp804_set_next_event,
 	.rating		= 300,
-	.cpumask	= cpu_all_mask,
 };
 
 static struct irqaction sp804_timer_irq = {
@@ -185,6 +184,7 @@ void __init sp804_clockevents_init(void __iomem *base, unsigned int irq,
 	clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ);
 	evt->name = name;
 	evt->irq = irq;
+	evt->cpumask = cpu_possible_mask;
 
 	setup_irq(irq, &sp804_timer_irq);
 	clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index e0d538803cc..e4df17ca90c 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -218,7 +218,7 @@ static void __init vic_register(void __iomem *base, unsigned int irq,
 	v->resume_sources = resume_sources;
 	v->irq = irq;
 	vic_id++;
-	v->domain = irq_domain_add_legacy(node, fls(valid_sources), irq, 0,
+	v->domain = irq_domain_add_simple(node, fls(valid_sources), irq,
 					  &vic_irqdomain_ops, v);
 }
 
@@ -350,7 +350,7 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
 	vic_register(base, irq_start, vic_sources, 0, node);
 }
 
-void __init __vic_init(void __iomem *base, unsigned int irq_start,
+void __init __vic_init(void __iomem *base, int irq_start,
 			      u32 vic_sources, u32 resume_sources,
 			      struct device_node *node)
 {
@@ -407,7 +407,6 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 int __init vic_of_init(struct device_node *node, struct device_node *parent)
 {
 	void __iomem *regs;
-	int irq_base;
 
 	if (WARN(parent, "non-root VICs are not supported"))
 		return -EINVAL;
@@ -416,18 +415,12 @@ int __init vic_of_init(struct device_node *node, struct device_node *parent)
 	if (WARN_ON(!regs))
 		return -EIO;
 
-	irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id());
-	if (WARN_ON(irq_base < 0))
-		goto out_unmap;
-
-	__vic_init(regs, irq_base, ~0, ~0, node);
+	/*
+	 * Passing -1 as first IRQ makes the simple domain allocate descriptors
+	 */
+	__vic_init(regs, -1, ~0, ~0, node);
 
 	return 0;
-
- out_unmap:
-	iounmap(regs);
-
-	return -EIO;
 }
 #endif /* CONFIG OF */
 
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 66aa7a6db88..394ded624e3 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -139,6 +139,7 @@ CONFIG_I2C_IMX=y
 CONFIG_SPI=y
 CONFIG_SPI_IMX=y
 CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_MC9S08DZ60=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_IMX2_WDT=y
@@ -155,6 +156,7 @@ CONFIG_SOC_CAMERA=y
 CONFIG_SOC_CAMERA_OV2640=y
 CONFIG_VIDEO_MX3=y
 CONFIG_FB=y
+CONFIG_LCD_PLATFORM=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_L4F00242T03=y
diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig
index 7bcf850eddc..3458752c4bb 100644
--- a/arch/arm/configs/mvebu_defconfig
+++ b/arch/arm/configs/mvebu_defconfig
@@ -1,6 +1,6 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
@@ -9,10 +9,12 @@ CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_MVEBU=y
-CONFIG_MACH_ARMADA_370_XP=y
+CONFIG_MACH_ARMADA_370=y
+CONFIG_MACH_ARMADA_XP=y
+# CONFIG_CACHE_L2X0 is not set
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
-CONFIG_USE_OF=y
+# CONFIG_COMPACTION is not set
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
@@ -23,6 +25,8 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig
index cdd4d2bd396..2ba9e63d0f1 100644
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@@ -1,3 +1,4 @@
+CONFIG_ARCH_VERSATILE=y
 CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 2ef95813fce..eb87200aa4b 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -250,6 +250,7 @@
  * Beware, it also clobers LR.
  */
 .macro safe_svcmode_maskall reg:req
+#if __LINUX_ARM_ARCH__ >= 6
 	mrs	\reg , cpsr
 	mov	lr , \reg
 	and	lr , lr , #MODE_MASK
@@ -266,6 +267,13 @@ THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
 	__ERET
 1:	msr	cpsr_c, \reg
 2:
+#else
+/*
+ * workaround for possibly broken pre-v6 hardware
+ * (akita, Sharp Zaurus C-1000, PXA270-based)
+ */
+	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, \reg
+#endif
 .endm
 
 /*
diff --git a/arch/arm/include/asm/flat.h b/arch/arm/include/asm/flat.h
index 59426a4595c..e847d23351e 100644
--- a/arch/arm/include/asm/flat.h
+++ b/arch/arm/include/asm/flat.h
@@ -8,7 +8,7 @@
 #define	flat_argvp_envp_on_stack()		1
 #define	flat_old_ram_flag(flags)		(flags)
 #define	flat_reloc_valid(reloc, size)		((reloc) <= (size))
-#define	flat_get_addr_from_rp(rp, relval, flags, persistent) get_unaligned(rp)
+#define	flat_get_addr_from_rp(rp, relval, flags, persistent) ((void)persistent,get_unaligned(rp))
 #define	flat_put_addr_at_rp(rp, val, relval)	put_unaligned(val,rp)
 #define	flat_get_relocate_addr(rel)		(rel)
 #define	flat_set_persistent(relval, p)		0
diff --git a/arch/arm/include/asm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h
index e14af1a1a32..2bebad36fc8 100644
--- a/arch/arm/include/asm/hardware/vic.h
+++ b/arch/arm/include/asm/hardware/vic.h
@@ -47,7 +47,7 @@
 struct device_node;
 struct pt_regs;
 
-void __vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources,
+void __vic_init(void __iomem *base, int irq_start, u32 vic_sources,
 		u32 resume_sources, struct device_node *node);
 void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources);
 int vic_of_init(struct device_node *node, struct device_node *parent);
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 35c1ed89b93..42f042ee4ad 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -64,7 +64,7 @@ extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
 static inline void __raw_writew(u16 val, volatile void __iomem *addr)
 {
 	asm volatile("strh %1, %0"
-		     : "+Qo" (*(volatile u16 __force *)addr)
+		     : "+Q" (*(volatile u16 __force *)addr)
 		     : "r" (val));
 }
 
@@ -72,7 +72,7 @@ static inline u16 __raw_readw(const volatile void __iomem *addr)
 {
 	u16 val;
 	asm volatile("ldrh %1, %0"
-		     : "+Qo" (*(volatile u16 __force *)addr),
+		     : "+Q" (*(volatile u16 __force *)addr),
 		       "=r" (val));
 	return val;
 }
diff --git a/arch/arm/include/asm/mach/serial_at91.h b/arch/arm/include/asm/mach/serial_at91.h
deleted file mode 100644
index ea6d063923b..00000000000
--- a/arch/arm/include/asm/mach/serial_at91.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  arch/arm/include/asm/mach/serial_at91.h
- *
- *  Based on serial_sa1100.h  by Nicolas Pitre
- *
- *  Copyright (C) 2002 ATMEL Rousset
- *
- *  Low level machine dependent UART functions.
- */
-
-struct uart_port;
-
-/*
- * This is a temporary structure for registering these
- * functions; it is intended to be discarded after boot.
- */
-struct atmel_port_fns {
-	void	(*set_mctrl)(struct uart_port *, u_int);
-	u_int	(*get_mctrl)(struct uart_port *);
-	void	(*enable_ms)(struct uart_port *);
-	void	(*pm)(struct uart_port *, u_int, u_int);
-	int	(*set_wake)(struct uart_port *, u_int);
-	int	(*open)(struct uart_port *);
-	void	(*close)(struct uart_port *);
-};
-
-#if defined(CONFIG_SERIAL_ATMEL)
-void atmel_register_uart_fns(struct atmel_port_fns *fns);
-#else
-#define atmel_register_uart_fns(fns) do { } while (0)
-#endif
-
-
diff --git a/arch/arm/include/asm/mach/serial_sa1100.h b/arch/arm/include/asm/mach/serial_sa1100.h
deleted file mode 100644
index d09064bf95a..00000000000
--- a/arch/arm/include/asm/mach/serial_sa1100.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- *  arch/arm/include/asm/mach/serial_sa1100.h
- *
- *  Author: Nicolas Pitre
- *
- * Moved and changed lots, Russell King
- *
- * Low level machine dependent UART functions.
- */
-
-struct uart_port;
-struct uart_info;
-
-/*
- * This is a temporary structure for registering these
- * functions; it is intended to be discarded after boot.
- */
-struct sa1100_port_fns {
-	void	(*set_mctrl)(struct uart_port *, u_int);
-	u_int	(*get_mctrl)(struct uart_port *);
-	void	(*pm)(struct uart_port *, u_int, u_int);
-	int	(*set_wake)(struct uart_port *, u_int);
-};
-
-#ifdef CONFIG_SERIAL_SA1100
-void sa1100_register_uart_fns(struct sa1100_port_fns *fns);
-void sa1100_register_uart(int idx, int port);
-#else
-#define sa1100_register_uart_fns(fns) do { } while (0)
-#define sa1100_register_uart(idx,port) do { } while (0)
-#endif
diff --git a/arch/arm/include/asm/mach/udc_pxa2xx.h b/arch/arm/include/asm/mach/udc_pxa2xx.h
deleted file mode 100644
index ea297ac70bc..00000000000
--- a/arch/arm/include/asm/mach/udc_pxa2xx.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/include/asm/mach/udc_pxa2xx.h
- *
- * This supports machine-specific differences in how the PXA2xx
- * USB Device Controller (UDC) is wired.
- *
- * It is set in linux/arch/arm/mach-pxa/<machine>.c or in
- * linux/arch/mach-ixp4xx/<machine>.c and used in
- * the probe routine of linux/drivers/usb/gadget/pxa2xx_udc.c
- */
-
-struct pxa2xx_udc_mach_info {
-        int  (*udc_is_connected)(void);		/* do we see host? */
-        void (*udc_command)(int cmd);
-#define	PXA2XX_UDC_CMD_CONNECT		0	/* let host see us */
-#define	PXA2XX_UDC_CMD_DISCONNECT	1	/* so host won't see us */
-
-	/* Boards following the design guidelines in the developer's manual,
-	 * with on-chip GPIOs not Lubbock's weird hardware, can have a sane
-	 * VBUS IRQ and omit the methods above.  Store the GPIO number
-	 * here.  Note that sometimes the signals go through inverters...
-	 */
-	bool	gpio_pullup_inverted;
-	int	gpio_pullup;			/* high == pullup activated */
-};
-
diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h
index 05b8e82ec9f..e3f75726343 100644
--- a/arch/arm/include/asm/sched_clock.h
+++ b/arch/arm/include/asm/sched_clock.h
@@ -10,7 +10,5 @@
 
 extern void sched_clock_postinit(void);
 extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate);
-extern void setup_sched_clock_needs_suspend(u32 (*read)(void), int bits,
-		unsigned long rate);
 
 #endif
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index 2e3be16c676..d3a22bebe6c 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -79,6 +79,7 @@ extern void cpu_die(void);
 
 extern void arch_send_call_function_single_ipi(int cpu);
 extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+extern void arch_send_wakeup_ipi_mask(const struct cpumask *mask);
 
 struct smp_operations {
 #ifdef CONFIG_SMP
diff --git a/arch/arm/include/asm/syscall.h b/arch/arm/include/asm/syscall.h
index 9fdded6b108..f1d96d4e809 100644
--- a/arch/arm/include/asm/syscall.h
+++ b/arch/arm/include/asm/syscall.h
@@ -7,6 +7,8 @@
 #ifndef _ASM_ARM_SYSCALL_H
 #define _ASM_ARM_SYSCALL_H
 
+#include <linux/audit.h> /* for AUDIT_ARCH_* */
+#include <linux/elf.h> /* for ELF_EM */
 #include <linux/err.h>
 #include <linux/sched.h>
 
@@ -95,4 +97,11 @@ static inline void syscall_set_arguments(struct task_struct *task,
 	memcpy(&regs->ARM_r0 + i, args, n * sizeof(args[0]));
 }
 
+static inline int syscall_get_arch(struct task_struct *task,
+				   struct pt_regs *regs)
+{
+	/* ARM tasks don't change audit architectures on the fly. */
+	return AUDIT_ARCH_ARM;
+}
+
 #endif /* _ASM_ARM_SYSCALL_H */
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 8477b4c1d39..cddda1f41f0 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -151,10 +151,10 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *,
 #define TIF_SYSCALL_TRACE	8
 #define TIF_SYSCALL_AUDIT	9
 #define TIF_SYSCALL_TRACEPOINT	10
+#define TIF_SECCOMP		11	/* seccomp syscall filtering active */
 #define TIF_USING_IWMMXT	17
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	20
-#define TIF_SECCOMP		21
 #define TIF_SWITCH_MM		22	/* deferred switch_mm */
 
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
@@ -163,11 +163,12 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *,
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
 #define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
 #define _TIF_SYSCALL_TRACEPOINT	(1 << TIF_SYSCALL_TRACEPOINT)
-#define _TIF_USING_IWMMXT	(1 << TIF_USING_IWMMXT)
 #define _TIF_SECCOMP		(1 << TIF_SECCOMP)
+#define _TIF_USING_IWMMXT	(1 << TIF_USING_IWMMXT)
 
 /* Checks for any syscall work in entry-common.S */
-#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SYSCALL_TRACEPOINT)
+#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
+			   _TIF_SYSCALL_TRACEPOINT | _TIF_SECCOMP)
 
 /*
  * Change these and you break ASM code in entry-common.S
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 77bd79f2ffd..7e1f76027f6 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -200,8 +200,8 @@ extern int __put_user_8(void *, unsigned long long);
 #define USER_DS			KERNEL_DS
 
 #define segment_eq(a,b)		(1)
-#define __addr_ok(addr)		(1)
-#define __range_ok(addr,size)	(0)
+#define __addr_ok(addr)		((void)(addr),1)
+#define __range_ok(addr,size)	((void)(addr),0)
 #define get_fs()		(KERNEL_DS)
 
 static inline void set_fs(mm_segment_t fs)
diff --git a/arch/arm/include/asm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h
index 6a6f1e485f4..301c1db3e99 100644
--- a/arch/arm/include/asm/vfpmacros.h
+++ b/arch/arm/include/asm/vfpmacros.h
@@ -27,9 +27,9 @@
 #if __LINUX_ARM_ARCH__ <= 6
 	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
 	ldr	\tmp, [\tmp, #0]
-	tst	\tmp, #HWCAP_VFPv3D16
-	ldceql	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
-	addne	\base, \base, #32*4		    @ step over unused register space
+	tst	\tmp, #HWCAP_VFPD32
+	ldcnel	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
+	addeq	\base, \base, #32*4		    @ step over unused register space
 #else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
 	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
@@ -51,9 +51,9 @@
 #if __LINUX_ARM_ARCH__ <= 6
 	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
 	ldr	\tmp, [\tmp, #0]
-	tst	\tmp, #HWCAP_VFPv3D16
-	stceql	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
-	addne	\base, \base, #32*4		    @ step over unused register space
+	tst	\tmp, #HWCAP_VFPD32
+	stcnel	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
+	addeq	\base, \base, #32*4		    @ step over unused register space
 #else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
 	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
diff --git a/arch/arm/include/asm/xen/interface.h b/arch/arm/include/asm/xen/interface.h
index ae05e56dd17..5000397134b 100644
--- a/arch/arm/include/asm/xen/interface.h
+++ b/arch/arm/include/asm/xen/interface.h
@@ -29,16 +29,22 @@
 
 #ifndef __ASSEMBLY__
 /* Explicitly size integers that represent pfns in the interface with
- * Xen so that we can have one ABI that works for 32 and 64 bit guests. */
+ * Xen so that we can have one ABI that works for 32 and 64 bit guests.
+ * Note that this means that the xen_pfn_t type may be capable of
+ * representing pfn's which the guest cannot represent in its own pfn
+ * type. However since pfn space is controlled by the guest this is
+ * fine since it simply wouldn't be able to create any sure pfns in
+ * the first place.
+ */
 typedef uint64_t xen_pfn_t;
+#define PRI_xen_pfn "llx"
 typedef uint64_t xen_ulong_t;
+#define PRI_xen_ulong "llx"
 /* Guest handles for primitive C types. */
 __DEFINE_GUEST_HANDLE(uchar, unsigned char);
 __DEFINE_GUEST_HANDLE(uint,  unsigned int);
-__DEFINE_GUEST_HANDLE(ulong, unsigned long);
 DEFINE_GUEST_HANDLE(char);
 DEFINE_GUEST_HANDLE(int);
-DEFINE_GUEST_HANDLE(long);
 DEFINE_GUEST_HANDLE(void);
 DEFINE_GUEST_HANDLE(uint64_t);
 DEFINE_GUEST_HANDLE(uint32_t);
diff --git a/arch/arm/include/asm/xen/page.h b/arch/arm/include/asm/xen/page.h
index 174202318df..c6b9096cef9 100644
--- a/arch/arm/include/asm/xen/page.h
+++ b/arch/arm/include/asm/xen/page.h
@@ -10,7 +10,7 @@
 #include <xen/interface/grant_table.h>
 
 #define pfn_to_mfn(pfn)			(pfn)
-#define phys_to_machine_mapping_valid	(1)
+#define phys_to_machine_mapping_valid(pfn) (1)
 #define mfn_to_pfn(mfn)			(mfn)
 #define mfn_to_virt(m)			(__va(mfn_to_pfn(m) << PAGE_SHIFT))
 
@@ -30,6 +30,8 @@ typedef struct xpaddr {
 #define XMADDR(x)	((xmaddr_t) { .maddr = (x) })
 #define XPADDR(x)	((xpaddr_t) { .paddr = (x) })
 
+#define INVALID_P2M_ENTRY      (~0UL)
+
 static inline xmaddr_t phys_to_machine(xpaddr_t phys)
 {
 	unsigned offset = phys.paddr & ~PAGE_MASK;
@@ -74,9 +76,14 @@ static inline int m2p_remove_override(struct page *page, bool clear_pte)
 	return 0;
 }
 
+static inline bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn)
+{
+	BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY);
+	return true;
+}
+
 static inline bool set_phys_to_machine(unsigned long pfn, unsigned long mfn)
 {
-	BUG();
-	return false;
+	return __set_phys_to_machine(pfn, mfn);
 }
 #endif /* _ASM_ARM_XEN_PAGE_H */
diff --git a/arch/arm/include/debug/8250_32.S b/arch/arm/include/debug/8250_32.S
new file mode 100644
index 00000000000..8db01eeabbb
--- /dev/null
+++ b/arch/arm/include/debug/8250_32.S
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit
+ * accesses to the 8250.
+ */
+
+#include <linux/serial_reg.h>
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #UART_TX << UART_SHIFT]
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #UART_LSR << UART_SHIFT]
+		and	\rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+		teq	\rd, #UART_LSR_TEMT | UART_LSR_THRE
+		bne	1002b
+		.endm
+
+		/* The UART's don't have any flow control IO's wired up. */
+		.macro	waituart,rd,rx
+		.endm
diff --git a/arch/arm/include/debug/picoxcell.S b/arch/arm/include/debug/picoxcell.S
index 7419deb1b94..bc1f07c49cd 100644
--- a/arch/arm/include/debug/picoxcell.S
+++ b/arch/arm/include/debug/picoxcell.S
@@ -5,10 +5,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit
- * accesses to the 8250.
  */
-#include <linux/serial_reg.h>
 
 #define UART_SHIFT 2
 #define PICOXCELL_UART1_BASE		0x80230000
@@ -19,17 +16,4 @@
 		ldr	\rp, =PICOXCELL_UART1_BASE
 		.endm
 
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #UART_TX << UART_SHIFT]
-		.endm
-
-		.macro	busyuart,rd,rx
-1002:		ldr	\rd, [\rx, #UART_LSR << UART_SHIFT]
-		and	\rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
-		teq	\rd, #UART_LSR_TEMT | UART_LSR_THRE
-		bne	1002b
-		.endm
-
-		/* The UART's don't have any flow control IO's wired up. */
-		.macro	waituart,rd,rx
-		.endm
+#include "8250_32.S"
diff --git a/arch/arm/include/debug/socfpga.S b/arch/arm/include/debug/socfpga.S
index d6f26d23374..966b2f99494 100644
--- a/arch/arm/include/debug/socfpga.S
+++ b/arch/arm/include/debug/socfpga.S
@@ -7,6 +7,9 @@
  * published by the Free Software Foundation.
  */
 
+#define UART_SHIFT 2
+#define DEBUG_LL_UART_OFFSET	0x00002000
+
 		.macro	addruart, rp, rv, tmp
 		mov	\rp, #DEBUG_LL_UART_OFFSET
 		orr	\rp, \rp, #0x00c00000
@@ -14,3 +17,5 @@
 		orr	\rp, \rp, #0xff000000	@ physical base
 		.endm
 
+#include "8250_32.S"
+
diff --git a/arch/arm/include/uapi/asm/hwcap.h b/arch/arm/include/uapi/asm/hwcap.h
index f254f6503cc..3688fd15a32 100644
--- a/arch/arm/include/uapi/asm/hwcap.h
+++ b/arch/arm/include/uapi/asm/hwcap.h
@@ -18,11 +18,12 @@
 #define HWCAP_THUMBEE	(1 << 11)
 #define HWCAP_NEON	(1 << 12)
 #define HWCAP_VFPv3	(1 << 13)
-#define HWCAP_VFPv3D16	(1 << 14)
+#define HWCAP_VFPv3D16	(1 << 14)	/* also set for VFPv4-D16 */
 #define HWCAP_TLS	(1 << 15)
 #define HWCAP_VFPv4	(1 << 16)
 #define HWCAP_IDIVA	(1 << 17)
 #define HWCAP_IDIVT	(1 << 18)
+#define HWCAP_VFPD32	(1 << 19)	/* set if VFP has 32 regs (not 16) */
 #define HWCAP_IDIV	(HWCAP_IDIVA | HWCAP_IDIVT)
 
 
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 417bac1846b..804153c0a9c 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -88,9 +88,9 @@ ENTRY(ret_from_fork)
 	bl	schedule_tail
 	cmp	r5, #0
 	movne	r0, r4
-	movne	lr, pc
+	adrne	lr, BSYM(1f)
 	movne	pc, r5
-	get_thread_info tsk
+1:	get_thread_info tsk
 	b	ret_slow_syscall
 ENDPROC(ret_from_fork)
 
@@ -417,16 +417,6 @@ local_restart:
 	ldr	r10, [tsk, #TI_FLAGS]		@ check for syscall tracing
 	stmdb	sp!, {r4, r5}			@ push fifth and sixth args
 
-#ifdef CONFIG_SECCOMP
-	tst	r10, #_TIF_SECCOMP
-	beq	1f
-	mov	r0, scno
-	bl	__secure_computing	
-	add	r0, sp, #S_R0 + S_OFF		@ pointer to regs
-	ldmia	r0, {r0 - r3}			@ have to reload r0 - r3
-1:
-#endif
-
 	tst	r10, #_TIF_SYSCALL_WORK		@ are we tracing syscalls?
 	bne	__sys_trace
 
@@ -458,11 +448,13 @@ __sys_trace:
 	ldmccia	r1, {r0 - r6}			@ have to reload r0 - r6
 	stmccia	sp, {r4, r5}			@ and update the stack args
 	ldrcc	pc, [tbl, scno, lsl #2]		@ call sys_* routine
-	b	2b
+	cmp	scno, #-1			@ skip the syscall?
+	bne	2b
+	add	sp, sp, #S_OFF			@ restore stack
+	b	ret_slow_syscall
 
 __sys_trace_return:
 	str	r0, [sp, #S_R0 + S_OFF]!	@ save returned r0
-	mov	r1, scno
 	mov	r0, sp
 	bl	syscall_trace_exit
 	b	ret_slow_syscall
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index 278cfc144f4..2c228a07e58 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -68,7 +68,7 @@ __after_proc_init:
 	 * CP15 system control register value returned in r0 from
 	 * the CPU init function.
 	 */
-#ifdef CONFIG_ALIGNMENT_TRAP
+#if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6
 	orr	r0, r0, #CR_A
 #else
 	bic	r0, r0, #CR_A
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 16cedb42c0c..896165096d6 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -34,6 +34,7 @@
 #include <linux/list.h>
 #include <linux/kallsyms.h>
 #include <linux/proc_fs.h>
+#include <linux/export.h>
 
 #include <asm/exception.h>
 #include <asm/mach/arch.h>
@@ -109,6 +110,7 @@ void set_irq_flags(unsigned int irq, unsigned int iflags)
 	/* Order is clear bits in "clr" then set bits in "set" */
 	irq_modify_status(irq, clr, set & ~clr);
 }
+EXPORT_SYMBOL_GPL(set_irq_flags);
 
 void __init init_IRQ(void)
 {
diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c
index 38c1a3b103a..83931290506 100644
--- a/arch/arm/kernel/kprobes-test-arm.c
+++ b/arch/arm/kernel/kprobes-test-arm.c
@@ -366,7 +366,9 @@ void kprobe_arm_test_cases(void)
 	TEST_UNSUPPORTED(".word 0xe04f0392 @ umaal r0, pc, r2, r3")
 	TEST_UNSUPPORTED(".word 0xe0500090 @ undef")
 	TEST_UNSUPPORTED(".word 0xe05fff9f @ undef")
+#endif
 
+#if __LINUX_ARM_ARCH__ >= 7
 	TEST_RRR(  "mls		r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
 	TEST_RRR(  "mlshi	r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
 	TEST_RR(   "mls		lr, r",1, VAL2,", r",2, VAL3,", r13")
@@ -456,6 +458,8 @@ void kprobe_arm_test_cases(void)
 	TEST_UNSUPPORTED(".word	0xe1700090") /* Unallocated space */
 #if __LINUX_ARM_ARCH__ >= 6
 	TEST_UNSUPPORTED("ldrex	r2, [sp]")
+#endif
+#if (__LINUX_ARM_ARCH__ >= 7) || defined(CONFIG_CPU_32v6K)
 	TEST_UNSUPPORTED("strexd	r0, r2, r3, [sp]")
 	TEST_UNSUPPORTED("ldrexd	r2, r3, [sp]")
 	TEST_UNSUPPORTED("strexb	r0, r2, [sp]")
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index e29c3337ca8..8ef8c933780 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -45,10 +45,9 @@ int machine_kexec_prepare(struct kimage *image)
 	for (i = 0; i < image->nr_segments; i++) {
 		current_segment = &image->segment[i];
 
-		err = memblock_is_region_memory(current_segment->mem,
-						current_segment->memsz);
-		if (err)
-			return - EINVAL;
+		if (!memblock_is_region_memory(current_segment->mem,
+					       current_segment->memsz))
+			return -EINVAL;
 
 		err = get_user(header, (__be32*)current_segment->buf);
 		if (err)
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 93971b1a4f0..53c0304b734 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -96,6 +96,10 @@ armpmu_event_set_period(struct perf_event *event,
 	s64 period = hwc->sample_period;
 	int ret = 0;
 
+	/* The period may have been changed by PERF_EVENT_IOC_PERIOD */
+	if (unlikely(period != hwc->last_period))
+		left = period - (hwc->last_period - left);
+
 	if (unlikely(left <= -period)) {
 		left = period;
 		local64_set(&hwc->period_left, left);
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 90084a6de35..44bc0b327e2 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -34,6 +34,7 @@
 #include <linux/leds.h>
 
 #include <asm/cacheflush.h>
+#include <asm/idmap.h>
 #include <asm/processor.h>
 #include <asm/thread_notify.h>
 #include <asm/stacktrace.h>
@@ -56,8 +57,6 @@ static const char *isa_modes[] = {
   "ARM" , "Thumb" , "Jazelle", "ThumbEE"
 };
 
-extern void setup_mm_for_reboot(void);
-
 static volatile int hlt_counter;
 
 void disable_hlt(void)
@@ -70,6 +69,7 @@ EXPORT_SYMBOL(disable_hlt);
 void enable_hlt(void)
 {
 	hlt_counter--;
+	BUG_ON(hlt_counter < 0);
 }
 
 EXPORT_SYMBOL(enable_hlt);
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 739db3a1b2d..03deeffd9f6 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -916,16 +916,11 @@ enum ptrace_syscall_dir {
 	PTRACE_SYSCALL_EXIT,
 };
 
-static int ptrace_syscall_trace(struct pt_regs *regs, int scno,
-				enum ptrace_syscall_dir dir)
+static int tracehook_report_syscall(struct pt_regs *regs,
+				    enum ptrace_syscall_dir dir)
 {
 	unsigned long ip;
 
-	current_thread_info()->syscall = scno;
-
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		return scno;
-
 	/*
 	 * IP is used to denote syscall entry/exit:
 	 * IP = 0 -> entry, =1 -> exit
@@ -944,19 +939,41 @@ static int ptrace_syscall_trace(struct pt_regs *regs, int scno,
 
 asmlinkage int syscall_trace_enter(struct pt_regs *regs, int scno)
 {
-	scno = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_ENTER);
+	current_thread_info()->syscall = scno;
+
+	/* Do the secure computing check first; failures should be fast. */
+	if (secure_computing(scno) == -1)
+		return -1;
+
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		scno = tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER);
+
 	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
 		trace_sys_enter(regs, scno);
+
 	audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0, regs->ARM_r1,
 			    regs->ARM_r2, regs->ARM_r3);
+
 	return scno;
 }
 
-asmlinkage int syscall_trace_exit(struct pt_regs *regs, int scno)
+asmlinkage void syscall_trace_exit(struct pt_regs *regs)
 {
-	scno = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_EXIT);
-	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
-		trace_sys_exit(regs, scno);
+	/*
+	 * Audit the syscall before anything else, as a debugger may
+	 * come in and change the current registers.
+	 */
 	audit_syscall_exit(regs);
-	return scno;
+
+	/*
+	 * Note that we haven't updated the ->syscall field for the
+	 * current thread. This isn't a problem because it will have
+	 * been set on syscall entry and there hasn't been an opportunity
+	 * for a PTRACE_SET_SYSCALL since then.
+	 */
+	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
+		trace_sys_exit(regs, regs_return_value(regs));
+
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall(regs, PTRACE_SYSCALL_EXIT);
 }
diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c
index e21bac20d90..fc6692e2b60 100644
--- a/arch/arm/kernel/sched_clock.c
+++ b/arch/arm/kernel/sched_clock.c
@@ -107,13 +107,6 @@ static void sched_clock_poll(unsigned long wrap_ticks)
 	update_sched_clock();
 }
 
-void __init setup_sched_clock_needs_suspend(u32 (*read)(void), int bits,
-		unsigned long rate)
-{
-	setup_sched_clock(read, bits, rate);
-	cd.needs_suspend = true;
-}
-
 void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate)
 {
 	unsigned long r, w;
@@ -189,18 +182,15 @@ void __init sched_clock_postinit(void)
 static int sched_clock_suspend(void)
 {
 	sched_clock_poll(sched_clock_timer.data);
-	if (cd.needs_suspend)
-		cd.suspended = true;
+	cd.suspended = true;
 	return 0;
 }
 
 static void sched_clock_resume(void)
 {
-	if (cd.needs_suspend) {
-		cd.epoch_cyc = read_sched_clock();
-		cd.epoch_cyc_copy = cd.epoch_cyc;
-		cd.suspended = false;
-	}
+	cd.epoch_cyc = read_sched_clock();
+	cd.epoch_cyc_copy = cd.epoch_cyc;
+	cd.suspended = false;
 }
 
 static struct syscore_ops sched_clock_ops = {
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 8e20754dd31..57f53773197 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -294,18 +294,24 @@ static void percpu_timer_setup(void);
 asmlinkage void __cpuinit secondary_start_kernel(void)
 {
 	struct mm_struct *mm = &init_mm;
-	unsigned int cpu = smp_processor_id();
+	unsigned int cpu;
+
+	/*
+	 * The identity mapping is uncached (strongly ordered), so
+	 * switch away from it before attempting any exclusive accesses.
+	 */
+	cpu_switch_mm(mm->pgd, mm);
+	enter_lazy_tlb(mm, current);
+	local_flush_tlb_all();
 
 	/*
 	 * All kernel threads share the same mm context; grab a
 	 * reference and switch to it.
 	 */
+	cpu = smp_processor_id();
 	atomic_inc(&mm->mm_count);
 	current->active_mm = mm;
 	cpumask_set_cpu(cpu, mm_cpumask(mm));
-	cpu_switch_mm(mm->pgd, mm);
-	enter_lazy_tlb(mm, current);
-	local_flush_tlb_all();
 
 	printk("CPU%u: Booted secondary processor\n", cpu);
 
@@ -415,6 +421,11 @@ void arch_send_call_function_ipi_mask(const struct cpumask *mask)
 	smp_cross_call(mask, IPI_CALL_FUNC);
 }
 
+void arch_send_wakeup_ipi_mask(const struct cpumask *mask)
+{
+	smp_cross_call(mask, IPI_WAKEUP);
+}
+
 void arch_send_call_function_single_ipi(int cpu)
 {
 	smp_cross_call(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
@@ -437,7 +448,7 @@ void show_ipi_list(struct seq_file *p, int prec)
 	for (i = 0; i < NR_IPI; i++) {
 		seq_printf(p, "%*s%u: ", prec - 1, "IPI", i);
 
-		for_each_present_cpu(cpu)
+		for_each_online_cpu(cpu)
 			seq_printf(p, "%10u ",
 				   __get_irq_stat(cpu, ipi_irqs[i]));
 
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index e1f906989bb..ff07879ad95 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -31,6 +31,8 @@ static void __iomem *twd_base;
 
 static struct clk *twd_clk;
 static unsigned long twd_timer_rate;
+static bool common_setup_called;
+static DEFINE_PER_CPU(bool, percpu_setup_called);
 
 static struct clock_event_device __percpu **twd_evt;
 static int twd_ppi;
@@ -42,10 +44,10 @@ static void twd_set_mode(enum clock_event_mode mode,
 
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
-		/* timer load already set up */
 		ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
 			| TWD_TIMER_CONTROL_PERIODIC;
-		__raw_writel(twd_timer_rate / HZ, twd_base + TWD_TIMER_LOAD);
+		__raw_writel(DIV_ROUND_CLOSEST(twd_timer_rate, HZ),
+			twd_base + TWD_TIMER_LOAD);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
 		/* period set, and timer enabled in 'next_event' hook */
@@ -248,17 +250,9 @@ static struct clk *twd_get_clock(void)
 		return clk;
 	}
 
-	err = clk_prepare(clk);
+	err = clk_prepare_enable(clk);
 	if (err) {
-		pr_err("smp_twd: clock failed to prepare: %d\n", err);
-		clk_put(clk);
-		return ERR_PTR(err);
-	}
-
-	err = clk_enable(clk);
-	if (err) {
-		pr_err("smp_twd: clock failed to enable: %d\n", err);
-		clk_unprepare(clk);
+		pr_err("smp_twd: clock failed to prepare+enable: %d\n", err);
 		clk_put(clk);
 		return ERR_PTR(err);
 	}
@@ -272,15 +266,45 @@ static struct clk *twd_get_clock(void)
 static int __cpuinit twd_timer_setup(struct clock_event_device *clk)
 {
 	struct clock_event_device **this_cpu_clk;
+	int cpu = smp_processor_id();
+
+	/*
+	 * If the basic setup for this CPU has been done before don't
+	 * bother with the below.
+	 */
+	if (per_cpu(percpu_setup_called, cpu)) {
+		__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
+		clockevents_register_device(*__this_cpu_ptr(twd_evt));
+		enable_percpu_irq(clk->irq, 0);
+		return 0;
+	}
+	per_cpu(percpu_setup_called, cpu) = true;
 
-	if (!twd_clk)
+	/*
+	 * This stuff only need to be done once for the entire TWD cluster
+	 * during the runtime of the system.
+	 */
+	if (!common_setup_called) {
 		twd_clk = twd_get_clock();
 
-	if (!IS_ERR_OR_NULL(twd_clk))
-		twd_timer_rate = clk_get_rate(twd_clk);
-	else
-		twd_calibrate_rate();
+		/*
+		 * We use IS_ERR_OR_NULL() here, because if the clock stubs
+		 * are active we will get a valid clk reference which is
+		 * however NULL and will return the rate 0. In that case we
+		 * need to calibrate the rate instead.
+		 */
+		if (!IS_ERR_OR_NULL(twd_clk))
+			twd_timer_rate = clk_get_rate(twd_clk);
+		else
+			twd_calibrate_rate();
+
+		common_setup_called = true;
+	}
 
+	/*
+	 * The following is done once per CPU the first time .setup() is
+	 * called.
+	 */
 	__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
 
 	clk->name = "local_timer";
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 36ff15bbfdd..b9f38e388b4 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -114,6 +114,15 @@ SECTIONS
 
 	RO_DATA(PAGE_SIZE)
 
+	. = ALIGN(4);
+	__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
+		__start___ex_table = .;
+#ifdef CONFIG_MMU
+		*(__ex_table)
+#endif
+		__stop___ex_table = .;
+	}
+
 #ifdef CONFIG_ARM_UNWIND
 	/*
 	 * Stack unwinding tables
@@ -220,16 +229,6 @@ SECTIONS
 		READ_MOSTLY_DATA(L1_CACHE_BYTES)
 
 		/*
-		 * The exception fixup table (might need resorting at runtime)
-		 */
-		. = ALIGN(4);
-		__start___ex_table = .;
-#ifdef CONFIG_MMU
-		*(__ex_table)
-#endif
-		__stop___ex_table = .;
-
-		/*
 		 * and the usual data section
 		 */
 		DATA_DATA
diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c
index 9d0a30032d7..0dc53854a5d 100644
--- a/arch/arm/lib/delay.c
+++ b/arch/arm/lib/delay.c
@@ -45,6 +45,7 @@ int read_current_timer(unsigned long *timer_val)
 	*timer_val = delay_timer->read_current_timer();
 	return 0;
 }
+EXPORT_SYMBOL_GPL(read_current_timer);
 
 static void __timer_delay(unsigned long cycles)
 {
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index b1420710193..043624219b5 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -21,19 +21,13 @@ config SOC_AT91SAM9
 	bool
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
+	select MULTI_IRQ_HANDLER
+	select SPARSE_IRQ
 
 menu "Atmel AT91 System-on-Chip"
 
 comment "Atmel AT91 Processor"
 
-config SOC_AT91SAM9
-	bool
-	select AT91_SAM9_SMC
-	select AT91_SAM9_TIME
-	select CPU_ARM926T
-	select MULTI_IRQ_HANDLER
-	select SPARSE_IRQ
-
 config SOC_AT91RM9200
 	bool "AT91RM9200"
 	select CPU_ARM920T
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index b4f0565aff6..5269825194a 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -187,7 +187,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
-	CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200", &twi_clk),
+	CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200.0", &twi_clk),
 	/* fake hclk clock */
 	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
 	CLKDEV_CON_ID("pioA", &pioA_clk),
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index a563189cdfc..3cee0e6ea7c 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -68,7 +68,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
 
 	/* Enable overcurrent notification */
 	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
+		if (gpio_is_valid(data->overcurrent_pin[i]))
 			at91_set_gpio_input(data->overcurrent_pin[i], 1);
 	}
 
@@ -479,7 +479,7 @@ static struct i2c_gpio_platform_data pdata = {
 
 static struct platform_device at91rm9200_twi_device = {
 	.name			= "i2c-gpio",
-	.id			= -1,
+	.id			= 0,
 	.dev.platform_data	= &pdata,
 };
 
@@ -512,7 +512,7 @@ static struct resource twi_resources[] = {
 
 static struct platform_device at91rm9200_twi_device = {
 	.name		= "i2c-at91rm9200",
-	.id		= -1,
+	.id		= 0,
 	.resource	= twi_resources,
 	.num_resources	= ARRAY_SIZE(twi_resources),
 };
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index ad29f93f20c..f8202615f4a 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -211,8 +211,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
 	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
-	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk),
-	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20", &twi_clk),
+	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk),
+	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi_clk),
 	/* more usart lookup table for DT entries */
 	CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
 	CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index a76b8684f52..414bd855fb0 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -72,7 +72,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
 
 	/* Enable overcurrent notification */
 	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
+		if (gpio_is_valid(data->overcurrent_pin[i]))
 			at91_set_gpio_input(data->overcurrent_pin[i], 1);
 	}
 
@@ -389,7 +389,7 @@ static struct i2c_gpio_platform_data pdata = {
 
 static struct platform_device at91sam9260_twi_device = {
 	.name			= "i2c-gpio",
-	.id			= -1,
+	.id			= 0,
 	.dev.platform_data	= &pdata,
 };
 
@@ -421,7 +421,7 @@ static struct resource twi_resources[] = {
 };
 
 static struct platform_device at91sam9260_twi_device = {
-	.id		= -1,
+	.id		= 0,
 	.resource	= twi_resources,
 	.num_resources	= ARRAY_SIZE(twi_resources),
 };
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 8d999eb1a13..04295c04b3e 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -178,8 +178,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
 	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0),
-	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261", &twi_clk),
-	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10", &twi_clk),
+	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261.0", &twi_clk),
+	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.0", &twi_clk),
 	CLKDEV_CON_ID("pioA", &pioA_clk),
 	CLKDEV_CON_ID("pioB", &pioB_clk),
 	CLKDEV_CON_ID("pioC", &pioC_clk),
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 9752f17efba..cd604aad8e9 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -72,7 +72,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
 
 	/* Enable overcurrent notification */
 	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
+		if (gpio_is_valid(data->overcurrent_pin[i]))
 			at91_set_gpio_input(data->overcurrent_pin[i], 1);
 	}
 
@@ -285,7 +285,7 @@ static struct i2c_gpio_platform_data pdata = {
 
 static struct platform_device at91sam9261_twi_device = {
 	.name			= "i2c-gpio",
-	.id			= -1,
+	.id			= 0,
 	.dev.platform_data	= &pdata,
 };
 
@@ -317,7 +317,7 @@ static struct resource twi_resources[] = {
 };
 
 static struct platform_device at91sam9261_twi_device = {
-	.id		= -1,
+	.id		= 0,
 	.resource	= twi_resources,
 	.num_resources	= ARRAY_SIZE(twi_resources),
 };
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 6a01d0360df..d6f9c23927c 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -193,7 +193,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
-	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk),
+	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk),
 	/* fake hclk clock */
 	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
 	CLKDEV_CON_ID("pioA", &pioA_clk),
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 8dde220b42b..9c61e59a210 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -78,7 +78,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
 
 	/* Enable overcurrent notification */
 	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
+		if (gpio_is_valid(data->overcurrent_pin[i]))
 			at91_set_gpio_input(data->overcurrent_pin[i], 1);
 	}
 
@@ -567,7 +567,7 @@ static struct i2c_gpio_platform_data pdata = {
 
 static struct platform_device at91sam9263_twi_device = {
 	.name			= "i2c-gpio",
-	.id			= -1,
+	.id			= 0,
 	.dev.platform_data	= &pdata,
 };
 
@@ -600,7 +600,7 @@ static struct resource twi_resources[] = {
 
 static struct platform_device at91sam9263_twi_device = {
 	.name		= "i2c-at91sam9260",
-	.id		= -1,
+	.id		= 0,
 	.resource	= twi_resources,
 	.num_resources	= ARRAY_SIZE(twi_resources),
 };
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index b1596072dcc..fcd233cb33d 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -1841,8 +1841,8 @@ static struct resource sha_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91SAM9G45_ID_AESTDESSHA,
-		.end	= AT91SAM9G45_ID_AESTDESSHA,
+		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
+		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -1874,8 +1874,8 @@ static struct resource tdes_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91SAM9G45_ID_AESTDESSHA,
-		.end	= AT91SAM9G45_ID_AESTDESSHA,
+		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
+		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -1910,8 +1910,8 @@ static struct resource aes_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91SAM9G45_ID_AESTDESSHA,
-		.end	= AT91SAM9G45_ID_AESTDESSHA,
+		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
+		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index d6ca0543ce8..5047bdc92ad 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -314,7 +314,7 @@ static struct i2c_gpio_platform_data pdata = {
 
 static struct platform_device at91sam9rl_twi_device = {
 	.name			= "i2c-gpio",
-	.id			= -1,
+	.id			= 0,
 	.dev.platform_data	= &pdata,
 };
 
@@ -347,7 +347,7 @@ static struct resource twi_resources[] = {
 
 static struct platform_device at91sam9rl_twi_device = {
 	.name		= "i2c-at91sam9g20",
-	.id		= -1,
+	.id		= 0,
 	.resource	= twi_resources,
 	.num_resources	= ARRAY_SIZE(twi_resources),
 };
diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c
index 6bd7300a2bc..bb7f54474b9 100644
--- a/arch/arm/mach-at91/at91x40.c
+++ b/arch/arm/mach-at91/at91x40.c
@@ -88,6 +88,6 @@ void __init at91x40_init_interrupts(unsigned int priority[NR_AIC_IRQS])
 	if (!priority)
 		priority = at91x40_default_irq_priority;
 
-	at91_aic_init(priority);
+	at91_aic_init(priority, at91_extern_irq);
 }
 
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 9cda3fd346a..6960778af4c 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -129,7 +129,7 @@ static struct spi_board_info neocore926_spi_devices[] = {
 		.max_speed_hz	= 125000 * 16,
 		.bus_num	= 0,
 		.platform_data	= &ads_info,
-		.irq		= AT91SAM9263_ID_IRQ1,
+		.irq		= NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1,
 	},
 #endif
 };
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 27b3af1a304..a9167dd45f9 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -309,7 +309,7 @@ static struct spi_board_info ek_spi_devices[] = {
 		.max_speed_hz	= 125000 * 26,	/* (max sample rate @ 3V) * (cmd + data + overhead) */
 		.bus_num	= 0,
 		.platform_data	= &ads_info,
-		.irq		= AT91SAM9261_ID_IRQ0,
+		.irq		= NR_IRQS_LEGACY + AT91SAM9261_ID_IRQ0,
 		.controller_data = (void *) AT91_PIN_PA28,	/* CS pin */
 	},
 #endif
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c