diff options
Diffstat (limited to 'usr')
| -rw-r--r-- | usr/Kconfig | 82 | ||||
| -rw-r--r-- | usr/Makefile | 23 | ||||
| -rw-r--r-- | usr/gen_init_cpio.c | 88 |
3 files changed, 75 insertions, 118 deletions
diff --git a/usr/Kconfig b/usr/Kconfig index 65b845bd4e3..2d4c77eecf2 100644 --- a/usr/Kconfig +++ b/usr/Kconfig @@ -90,79 +90,11 @@ config RD_LZO Support loading of a LZO encoded initial ramdisk or cpio buffer If unsure, say N. -choice - prompt "Built-in initramfs compression mode" if INITRAMFS_SOURCE!="" - help - This option decides by which algorithm the builtin initramfs - will be compressed. Several compression algorithms are - available, which differ in efficiency, compression and - decompression speed. Compression speed is only relevant - when building a kernel. Decompression speed is relevant at - each boot. - - If you have any problems with bzip2 or LZMA compressed - initramfs, mail me (Alain Knaff) <alain@knaff.lu>. - - High compression options are mostly useful for users who are - low on RAM, since it reduces the memory consumption during - boot. - - If in doubt, select 'gzip' - -config INITRAMFS_COMPRESSION_NONE - bool "None" - help - Do not compress the built-in initramfs at all. This may - sound wasteful in space, but, you should be aware that the - built-in initramfs will be compressed at a later stage - anyways along with the rest of the kernel, on those - architectures that support this. - However, not compressing the initramfs may lead to slightly - higher memory consumption during a short time at boot, while - both the cpio image and the unpacked filesystem image will - be present in memory simultaneously - -config INITRAMFS_COMPRESSION_GZIP - bool "Gzip" - depends on RD_GZIP - help - The old and tried gzip compression. It provides a good balance - between compression ratio and decompression speed. - -config INITRAMFS_COMPRESSION_BZIP2 - bool "Bzip2" - depends on RD_BZIP2 - help - Its compression ratio and speed is intermediate. - Decompression speed is slowest among the four. The initramfs - size is about 10% smaller with bzip2, in comparison to gzip. - Bzip2 uses a large amount of memory. For modern kernels you - will need at least 8MB RAM or more for booting. - -config INITRAMFS_COMPRESSION_LZMA - bool "LZMA" - depends on RD_LZMA - help - The most recent compression algorithm. - Its ratio is best, decompression speed is between the other - three. Compression is slowest. The initramfs size is about 33% - smaller with LZMA in comparison to gzip. - -config INITRAMFS_COMPRESSION_XZ - bool "XZ" - depends on RD_XZ - help - XZ uses the LZMA2 algorithm. The initramfs size is about 30% - smaller with XZ in comparison to gzip. Decompression speed - is better than that of bzip2 but worse than gzip and LZO. - Compression is slow. - -config INITRAMFS_COMPRESSION_LZO - bool "LZO" - depends on RD_LZO +config RD_LZ4 + bool "Support initial ramdisks compressed using LZ4" if EXPERT + default !EXPERT + depends on BLK_DEV_INITRD + select DECOMPRESS_LZ4 help - Its compression ratio is the poorest among the four. The kernel - size is about 10% bigger than gzip; however its speed - (both compression and decompression) is the fastest. - -endchoice + Support loading of a LZ4 encoded initial ramdisk or cpio buffer + If unsure, say N. diff --git a/usr/Makefile b/usr/Makefile index 029ffe6cd0d..e767f019acc 100644 --- a/usr/Makefile +++ b/usr/Makefile @@ -6,20 +6,23 @@ klibcdirs:; PHONY += klibcdirs -# Gzip -suffix_$(CONFIG_INITRAMFS_COMPRESSION_GZIP) = .gz - # Bzip2 -suffix_$(CONFIG_INITRAMFS_COMPRESSION_BZIP2) = .bz2 +suffix_$(CONFIG_RD_BZIP2) = .bz2 # Lzma -suffix_$(CONFIG_INITRAMFS_COMPRESSION_LZMA) = .lzma +suffix_$(CONFIG_RD_LZMA) = .lzma # XZ -suffix_$(CONFIG_INITRAMFS_COMPRESSION_XZ) = .xz +suffix_$(CONFIG_RD_XZ) = .xz # Lzo -suffix_$(CONFIG_INITRAMFS_COMPRESSION_LZO) = .lzo +suffix_$(CONFIG_RD_LZO) = .lzo + +# Lz4 +suffix_$(CONFIG_RD_LZ4) = .lz4 + +# Gzip +suffix_$(CONFIG_RD_GZIP) = .gz AFLAGS_initramfs_data.o += -DINITRAMFS_IMAGE="usr/initramfs_data.cpio$(suffix_y)" @@ -53,7 +56,10 @@ endif quiet_cmd_initfs = GEN $@ cmd_initfs = $(initramfs) -o $@ $(ramfs-args) $(ramfs-input) -targets := initramfs_data.cpio.gz initramfs_data.cpio.bz2 initramfs_data.cpio.lzma initramfs_data.cpio.xz initramfs_data.cpio.lzo initramfs_data.cpio +targets := initramfs_data.cpio.gz initramfs_data.cpio.bz2 \ + initramfs_data.cpio.lzma initramfs_data.cpio.xz \ + initramfs_data.cpio.lzo initramfs_data.cpio.lz4 \ + initramfs_data.cpio # do not try to update files included in initramfs $(deps_initramfs): ; @@ -66,4 +72,3 @@ $(deps_initramfs): klibcdirs $(obj)/initramfs_data.cpio$(suffix_y): $(obj)/gen_init_cpio $(deps_initramfs) klibcdirs $(Q)$(initramfs) -l $(ramfs-input) > $(obj)/.initramfs_data.cpio.d $(call if_changed,initfs) - diff --git a/usr/gen_init_cpio.c b/usr/gen_init_cpio.c index 7f06884ecd4..225ad244cf8 100644 --- a/usr/gen_init_cpio.c +++ b/usr/gen_init_cpio.c @@ -22,6 +22,7 @@ static unsigned int offset; static unsigned int ino = 721; +static time_t default_mtime; struct file_handler { const char *type; @@ -102,7 +103,6 @@ static int cpio_mkslink(const char *name, const char *target, unsigned int mode, uid_t uid, gid_t gid) { char s[256]; - time_t mtime = time(NULL); if (name[0] == '/') name++; @@ -114,7 +114,7 @@ static int cpio_mkslink(const char *name, const char *target, (long) uid, /* uid */ (long) gid, /* gid */ 1, /* nlink */ - (long) mtime, /* mtime */ + (long) default_mtime, /* mtime */ (unsigned)strlen(target)+1, /* filesize */ 3, /* major */ 1, /* minor */ @@ -152,7 +152,6 @@ static int cpio_mkgeneric(const char *name, unsigned int mode, uid_t uid, gid_t gid) { char s[256]; - time_t mtime = time(NULL); if (name[0] == '/') name++; @@ -164,7 +163,7 @@ static int cpio_mkgeneric(const char *name, unsigned int mode, (long) uid, /* uid */ (long) gid, /* gid */ 2, /* nlink */ - (long) mtime, /* mtime */ + (long) default_mtime, /* mtime */ 0, /* filesize */ 3, /* major */ 1, /* minor */ @@ -242,7 +241,6 @@ static int cpio_mknod(const char *name, unsigned int mode, unsigned int maj, unsigned int min) { char s[256]; - time_t mtime = time(NULL); if (dev_type == 'b') mode |= S_IFBLK; @@ -259,7 +257,7 @@ static int cpio_mknod(const char *name, unsigned int mode, (long) uid, /* uid */ (long) gid, /* gid */ 1, /* nlink */ - (long) mtime, /* mtime */ + (long) default_mtime, /* mtime */ 0, /* filesize */ 3, /* major */ 1, /* minor */ @@ -305,7 +303,7 @@ static int cpio_mkfile(const char *name, const char *location, int retval; int rc = -1; int namesize; - int i; + unsigned int i; mode |= S_IFREG; @@ -383,27 +381,20 @@ error: static char *cpio_replace_env(char *new_location) { - char expanded[PATH_MAX + 1]; - char env_var[PATH_MAX + 1]; - char *start; - char *end; - - for (start = NULL; (start = strstr(new_location, "${")); ) { - end = strchr(start, '}'); - if (start < end) { - *env_var = *expanded = '\0'; - strncat(env_var, start + 2, end - start - 2); - strncat(expanded, new_location, start - new_location); - strncat(expanded, getenv(env_var), PATH_MAX); - strncat(expanded, end + 1, PATH_MAX); - strncpy(new_location, expanded, PATH_MAX); - } else - break; - } - - return new_location; -} + char expanded[PATH_MAX + 1]; + char *start, *end, *var; + + while ((start = strstr(new_location, "${")) && + (end = strchr(start + 2, '}'))) { + *start = *end = 0; + var = getenv(start + 2); + snprintf(expanded, sizeof expanded, "%s%s%s", + new_location, var ? var : "", end + 1); + strcpy(new_location, expanded); + } + return new_location; +} static int cpio_mkfile_line(const char *line) { @@ -460,7 +451,7 @@ static int cpio_mkfile_line(const char *line) static void usage(const char *prog) { fprintf(stderr, "Usage:\n" - "\t%s <cpio_list>\n" + "\t%s [-t <timestamp>] <cpio_list>\n" "\n" "<cpio_list> is a file containing newline separated entries that\n" "describe the files to be included in the initramfs archive:\n" @@ -491,7 +482,11 @@ static void usage(const char *prog) "nod /dev/console 0600 0 0 c 5 1\n" "dir /root 0700 0 0\n" "dir /sbin 0755 0 0\n" - "file /sbin/kinit /usr/src/klibc/kinit/kinit 0755 0 0\n", + "file /sbin/kinit /usr/src/klibc/kinit/kinit 0755 0 0\n" + "\n" + "<timestamp> is time in seconds since Epoch that will be used\n" + "as mtime for symlinks, special files and directories. The default\n" + "is to use the current time for these entries.\n", prog); } @@ -529,17 +524,42 @@ int main (int argc, char *argv[]) char *args, *type; int ec = 0; int line_nr = 0; + const char *filename; + + default_mtime = time(NULL); + while (1) { + int opt = getopt(argc, argv, "t:h"); + char *invalid; + + if (opt == -1) + break; + switch (opt) { + case 't': + default_mtime = strtol(optarg, &invalid, 10); + if (!*optarg || *invalid) { + fprintf(stderr, "Invalid timestamp: %s\n", + optarg); + usage(argv[0]); + exit(1); + } + break; + case 'h': + case '?': + usage(argv[0]); + exit(opt == 'h' ? 0 : 1); + } + } - if (2 != argc) { + if (argc - optind != 1) { usage(argv[0]); exit(1); } - - if (!strcmp(argv[1], "-")) + filename = argv[optind]; + if (!strcmp(filename, "-")) cpio_list = stdin; - else if (! (cpio_list = fopen(argv[1], "r"))) { + else if (!(cpio_list = fopen(filename, "r"))) { fprintf(stderr, "ERROR: unable to open '%s': %s\n\n", - argv[1], strerror(errno)); + filename, strerror(errno)); usage(argv[0]); exit(1); } |