diff options
Diffstat (limited to 'usr')
| -rw-r--r-- | usr/Kconfig | 96 | ||||
| -rw-r--r-- | usr/Makefile | 31 | ||||
| -rw-r--r-- | usr/gen_init_cpio.c | 108 | ||||
| -rw-r--r-- | usr/initramfs_data.S | 22 | ||||
| -rw-r--r-- | usr/initramfs_data.bz2.S | 29 | ||||
| -rw-r--r-- | usr/initramfs_data.gz.S | 29 | ||||
| -rw-r--r-- | usr/initramfs_data.lzma.S | 29 |
7 files changed, 128 insertions, 216 deletions
diff --git a/usr/Kconfig b/usr/Kconfig index e2721f5a350..2d4c77eecf2 100644 --- a/usr/Kconfig +++ b/usr/Kconfig @@ -46,7 +46,7 @@ config INITRAMFS_ROOT_GID If you are not sure, leave it set to "0". config RD_GZIP - bool "Support initial ramdisks compressed using gzip" if EMBEDDED + bool "Support initial ramdisks compressed using gzip" if EXPERT default y depends on BLK_DEV_INITRD select DECOMPRESS_GZIP @@ -55,8 +55,8 @@ config RD_GZIP If unsure, say Y. config RD_BZIP2 - bool "Support initial ramdisks compressed using bzip2" if EMBEDDED - default !EMBEDDED + bool "Support initial ramdisks compressed using bzip2" if EXPERT + default !EXPERT depends on BLK_DEV_INITRD select DECOMPRESS_BZIP2 help @@ -64,87 +64,37 @@ config RD_BZIP2 If unsure, say N. config RD_LZMA - bool "Support initial ramdisks compressed using LZMA" if EMBEDDED - default !EMBEDDED + bool "Support initial ramdisks compressed using LZMA" if EXPERT + default !EXPERT depends on BLK_DEV_INITRD select DECOMPRESS_LZMA help Support loading of a LZMA encoded initial ramdisk or cpio buffer If unsure, say N. +config RD_XZ + bool "Support initial ramdisks compressed using XZ" if EXPERT + default !EXPERT + depends on BLK_DEV_INITRD + select DECOMPRESS_XZ + help + Support loading of a XZ encoded initial ramdisk or cpio buffer. + If unsure, say N. + config RD_LZO - bool "Support initial ramdisks compressed using LZO" if EMBEDDED - default !EMBEDDED + bool "Support initial ramdisks compressed using LZO" if EXPERT + default !EXPERT depends on BLK_DEV_INITRD select DECOMPRESS_LZO help Support loading of a LZO encoded initial ramdisk or cpio buffer If unsure, say N. -choice - prompt "Built-in initramfs compression mode" if INITRAMFS_SOURCE!="" - help - This option decides by which algorithm the builtin initramfs - will be compressed. Several compression algorithms are - available, which differ in efficiency, compression and - decompression speed. Compression speed is only relevant - when building a kernel. Decompression speed is relevant at - each boot. - - If you have any problems with bzip2 or LZMA compressed - initramfs, mail me (Alain Knaff) <alain@knaff.lu>. - - High compression options are mostly useful for users who are - low on RAM, since it reduces the memory consumption during - boot. - - If in doubt, select 'gzip' - -config INITRAMFS_COMPRESSION_NONE - bool "None" - help - Do not compress the built-in initramfs at all. This may - sound wasteful in space, but, you should be aware that the - built-in initramfs will be compressed at a later stage - anyways along with the rest of the kernel, on those - architectures that support this. - However, not compressing the initramfs may lead to slightly - higher memory consumption during a short time at boot, while - both the cpio image and the unpacked filesystem image will - be present in memory simultaneously - -config INITRAMFS_COMPRESSION_GZIP - bool "Gzip" - depends on RD_GZIP - help - The old and tried gzip compression. It provides a good balance - between compression ratio and decompression speed. - -config INITRAMFS_COMPRESSION_BZIP2 - bool "Bzip2" - depends on RD_BZIP2 - help - Its compression ratio and speed is intermediate. - Decompression speed is slowest among the four. The initramfs - size is about 10% smaller with bzip2, in comparison to gzip. - Bzip2 uses a large amount of memory. For modern kernels you - will need at least 8MB RAM or more for booting. - -config INITRAMFS_COMPRESSION_LZMA - bool "LZMA" - depends on RD_LZMA - help - The most recent compression algorithm. - Its ratio is best, decompression speed is between the other - three. Compression is slowest. The initramfs size is about 33% - smaller with LZMA in comparison to gzip. - -config INITRAMFS_COMPRESSION_LZO - bool "LZO" - depends on RD_LZO +config RD_LZ4 + bool "Support initial ramdisks compressed using LZ4" if EXPERT + default !EXPERT + depends on BLK_DEV_INITRD + select DECOMPRESS_LZ4 help - Its compression ratio is the poorest among the four. The kernel - size is about about 10% bigger than gzip; however its speed - (both compression and decompression) is the fastest. - -endchoice + Support loading of a LZ4 encoded initial ramdisk or cpio buffer + If unsure, say N. diff --git a/usr/Makefile b/usr/Makefile index 1e6a9e4a72c..e767f019acc 100644 --- a/usr/Makefile +++ b/usr/Makefile @@ -6,22 +6,33 @@ klibcdirs:; PHONY += klibcdirs -# Gzip -suffix_$(CONFIG_INITRAMFS_COMPRESSION_GZIP) = .gz - # Bzip2 -suffix_$(CONFIG_INITRAMFS_COMPRESSION_BZIP2) = .bz2 +suffix_$(CONFIG_RD_BZIP2) = .bz2 # Lzma -suffix_$(CONFIG_INITRAMFS_COMPRESSION_LZMA) = .lzma +suffix_$(CONFIG_RD_LZMA) = .lzma + +# XZ +suffix_$(CONFIG_RD_XZ) = .xz + +# Lzo +suffix_$(CONFIG_RD_LZO) = .lzo + +# Lz4 +suffix_$(CONFIG_RD_LZ4) = .lz4 + +# Gzip +suffix_$(CONFIG_RD_GZIP) = .gz + +AFLAGS_initramfs_data.o += -DINITRAMFS_IMAGE="usr/initramfs_data.cpio$(suffix_y)" # Generate builtin.o based on initramfs_data.o -obj-$(CONFIG_BLK_DEV_INITRD) := initramfs_data$(suffix_y).o +obj-$(CONFIG_BLK_DEV_INITRD) := initramfs_data.o # initramfs_data.o contains the compressed initramfs_data.cpio image. # The image is included using .incbin, a dependency which is not # tracked automatically. -$(obj)/initramfs_data$(suffix_y).o: $(obj)/initramfs_data.cpio$(suffix_y) FORCE +$(obj)/initramfs_data.o: $(obj)/initramfs_data.cpio$(suffix_y) FORCE ##### # Generate the initramfs cpio archive @@ -45,7 +56,10 @@ endif quiet_cmd_initfs = GEN $@ cmd_initfs = $(initramfs) -o $@ $(ramfs-args) $(ramfs-input) -targets := initramfs_data.cpio.gz initramfs_data.cpio.bz2 initramfs_data.cpio.lzma initramfs_data.cpio +targets := initramfs_data.cpio.gz initramfs_data.cpio.bz2 \ + initramfs_data.cpio.lzma initramfs_data.cpio.xz \ + initramfs_data.cpio.lzo initramfs_data.cpio.lz4 \ + initramfs_data.cpio # do not try to update files included in initramfs $(deps_initramfs): ; @@ -58,4 +72,3 @@ $(deps_initramfs): klibcdirs $(obj)/initramfs_data.cpio$(suffix_y): $(obj)/gen_init_cpio $(deps_initramfs) klibcdirs $(Q)$(initramfs) -l $(ramfs-input) > $(obj)/.initramfs_data.cpio.d $(call if_changed,initfs) - diff --git a/usr/gen_init_cpio.c b/usr/gen_init_cpio.c index b2b3c2d1cf8..225ad244cf8 100644 --- a/usr/gen_init_cpio.c +++ b/usr/gen_init_cpio.c @@ -22,6 +22,7 @@ static unsigned int offset; static unsigned int ino = 721; +static time_t default_mtime; struct file_handler { const char *type; @@ -102,8 +103,9 @@ static int cpio_mkslink(const char *name, const char *target, unsigned int mode, uid_t uid, gid_t gid) { char s[256]; - time_t mtime = time(NULL); + if (name[0] == '/') + name++; sprintf(s,"%s%08X%08X%08lX%08lX%08X%08lX" "%08X%08X%08X%08X%08X%08X%08X", "070701", /* magic */ @@ -112,7 +114,7 @@ static int cpio_mkslink(const char *name, const char *target, (long) uid, /* uid */ (long) gid, /* gid */ 1, /* nlink */ - (long) mtime, /* mtime */ + (long) default_mtime, /* mtime */ (unsigned)strlen(target)+1, /* filesize */ 3, /* major */ 1, /* minor */ @@ -150,8 +152,9 @@ static int cpio_mkgeneric(const char *name, unsigned int mode, uid_t uid, gid_t gid) { char s[256]; - time_t mtime = time(NULL); + if (name[0] == '/') + name++; sprintf(s,"%s%08X%08X%08lX%08lX%08X%08lX" "%08X%08X%08X%08X%08X%08X%08X", "070701", /* magic */ @@ -160,7 +163,7 @@ static int cpio_mkgeneric(const char *name, unsigned int mode, (long) uid, /* uid */ (long) gid, /* gid */ 2, /* nlink */ - (long) mtime, /* mtime */ + (long) default_mtime, /* mtime */ 0, /* filesize */ 3, /* major */ 1, /* minor */ @@ -238,13 +241,14 @@ static int cpio_mknod(const char *name, unsigned int mode, unsigned int maj, unsigned int min) { char s[256]; - time_t mtime = time(NULL); if (dev_type == 'b') mode |= S_IFBLK; else mode |= S_IFCHR; + if (name[0] == '/') + name++; sprintf(s,"%s%08X%08X%08lX%08lX%08X%08lX" "%08X%08X%08X%08X%08X%08X%08X", "070701", /* magic */ @@ -253,7 +257,7 @@ static int cpio_mknod(const char *name, unsigned int mode, (long) uid, /* uid */ (long) gid, /* gid */ 1, /* nlink */ - (long) mtime, /* mtime */ + (long) default_mtime, /* mtime */ 0, /* filesize */ 3, /* major */ 1, /* minor */ @@ -299,22 +303,22 @@ static int cpio_mkfile(const char *name, const char *location, int retval; int rc = -1; int namesize; - int i; + unsigned int i; mode |= S_IFREG; - retval = stat (location, &buf); - if (retval) { - fprintf (stderr, "File %s could not be located\n", location); - goto error; - } - file = open (location, O_RDONLY); if (file < 0) { fprintf (stderr, "File %s could not be opened for reading\n", location); goto error; } + retval = fstat(file, &buf); + if (retval) { + fprintf(stderr, "File %s could not be stat()'ed\n", location); + goto error; + } + filebuf = malloc(buf.st_size); if (!filebuf) { fprintf (stderr, "out of memory\n"); @@ -332,6 +336,8 @@ static int cpio_mkfile(const char *name, const char *location, /* data goes on last link */ if (i == nlinks) size = buf.st_size; + if (name[0] == '/') + name++; namesize = strlen(name) + 1; sprintf(s,"%s%08X%08X%08lX%08lX%08X%08lX" "%08lX%08X%08X%08X%08X%08X%08X", @@ -375,27 +381,20 @@ error: static char *cpio_replace_env(char *new_location) { - char expanded[PATH_MAX + 1]; - char env_var[PATH_MAX + 1]; - char *start; - char *end; - - for (start = NULL; (start = strstr(new_location, "${")); ) { - end = strchr(start, '}'); - if (start < end) { - *env_var = *expanded = '\0'; - strncat(env_var, start + 2, end - start - 2); - strncat(expanded, new_location, start - new_location); - strncat(expanded, getenv(env_var), PATH_MAX); - strncat(expanded, end + 1, PATH_MAX); - strncpy(new_location, expanded, PATH_MAX); - } else - break; - } - - return new_location; -} + char expanded[PATH_MAX + 1]; + char *start, *end, *var; + + while ((start = strstr(new_location, "${")) && + (end = strchr(start + 2, '}'))) { + *start = *end = 0; + var = getenv(start + 2); + snprintf(expanded, sizeof expanded, "%s%s%s", + new_location, var ? var : "", end + 1); + strcpy(new_location, expanded); + } + return new_location; +} static int cpio_mkfile_line(const char *line) { @@ -452,7 +451,7 @@ static int cpio_mkfile_line(const char *line) static void usage(const char *prog) { fprintf(stderr, "Usage:\n" - "\t%s <cpio_list>\n" + "\t%s [-t <timestamp>] <cpio_list>\n" "\n" "<cpio_list> is a file containing newline separated entries that\n" "describe the files to be included in the initramfs archive:\n" @@ -483,7 +482,11 @@ static void usage(const char *prog) "nod /dev/console 0600 0 0 c 5 1\n" "dir /root 0700 0 0\n" "dir /sbin 0755 0 0\n" - "file /sbin/kinit /usr/src/klibc/kinit/kinit 0755 0 0\n", + "file /sbin/kinit /usr/src/klibc/kinit/kinit 0755 0 0\n" + "\n" + "<timestamp> is time in seconds since Epoch that will be used\n" + "as mtime for symlinks, special files and directories. The default\n" + "is to use the current time for these entries.\n", prog); } @@ -521,17 +524,42 @@ int main (int argc, char *argv[]) char *args, *type; int ec = 0; int line_nr = 0; + const char *filename; + + default_mtime = time(NULL); + while (1) { + int opt = getopt(argc, argv, "t:h"); + char *invalid; + + if (opt == -1) + break; + switch (opt) { + case 't': + default_mtime = strtol(optarg, &invalid, 10); + if (!*optarg || *invalid) { + fprintf(stderr, "Invalid timestamp: %s\n", + optarg); + usage(argv[0]); + exit(1); + } + break; + case 'h': + case '?': + usage(argv[0]); + exit(opt == 'h' ? 0 : 1); + } + } - if (2 != argc) { + if (argc - optind != 1) { usage(argv[0]); exit(1); } - - if (!strcmp(argv[1], "-")) + filename = argv[optind]; + if (!strcmp(filename, "-")) cpio_list = stdin; - else if (! (cpio_list = fopen(argv[1], "r"))) { + else if (!(cpio_list = fopen(filename, "r"))) { fprintf(stderr, "ERROR: unable to open '%s': %s\n\n", - argv[1], strerror(errno)); + filename, strerror(errno)); usage(argv[0]); exit(1); } diff --git a/usr/initramfs_data.S b/usr/initramfs_data.S index 7c6973d8d82..c14322d1c0c 100644 --- a/usr/initramfs_data.S +++ b/usr/initramfs_data.S @@ -11,11 +11,7 @@ -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o ld -m elf_i386 -r -o built-in.o initramfs_data.o - initramfs_data.scr looks like this: -SECTIONS -{ - .init.ramfs : { *(.data) } -} + For including the .init.ramfs sections, see include/asm-generic/vmlinux.lds. The above example is for i386 - the parameters vary from architectures. Eventually look up LDFLAGS_BLOB in an older version of the @@ -25,6 +21,18 @@ SECTIONS in the ELF header, as required by certain architectures. */ -.section .init.ramfs,"a" -.incbin "usr/initramfs_data.cpio" +#include <linux/stringify.h> +#include <asm-generic/vmlinux.lds.h> +.section .init.ramfs,"a" +__irf_start: +.incbin __stringify(INITRAMFS_IMAGE) +__irf_end: +.section .init.ramfs.info,"a" +.globl VMLINUX_SYMBOL(__initramfs_size) +VMLINUX_SYMBOL(__initramfs_size): +#ifdef CONFIG_64BIT + .quad __irf_end - __irf_start +#else + .long __irf_end - __irf_start +#endif diff --git a/usr/initramfs_data.bz2.S b/usr/initramfs_data.bz2.S deleted file mode 100644 index bc54d090365..00000000000 --- a/usr/initramfs_data.bz2.S +++ /dev/null @@ -1,29 +0,0 @@ -/* - initramfs_data includes the compressed binary that is the - filesystem used for early user space. - Note: Older versions of "as" (prior to binutils 2.11.90.0.23 - released on 2001-07-14) dit not support .incbin. - If you are forced to use older binutils than that then the - following trick can be applied to create the resulting binary: - - - ld -m elf_i386 --format binary --oformat elf32-i386 -r \ - -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o - ld -m elf_i386 -r -o built-in.o initramfs_data.o - - initramfs_data.scr looks like this: -SECTIONS -{ - .init.ramfs : { *(.data) } -} - - The above example is for i386 - the parameters vary from architectures. - Eventually look up LDFLAGS_BLOB in an older version of the - arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced. - - Using .incbin has the advantage over ld that the correct flags are set - in the ELF header, as required by certain architectures. -*/ - -.section .init.ramfs,"a" -.incbin "usr/initramfs_data.cpio.bz2" diff --git a/usr/initramfs_data.gz.S b/usr/initramfs_data.gz.S deleted file mode 100644 index 890c8dd1d6b..00000000000 --- a/usr/initramfs_data.gz.S +++ /dev/null @@ -1,29 +0,0 @@ -/* - initramfs_data includes the compressed binary that is the - filesystem used for early user space. - Note: Older versions of "as" (prior to binutils 2.11.90.0.23 - released on 2001-07-14) dit not support .incbin. - If you are forced to use older binutils than that then the - following trick can be applied to create the resulting binary: - - - ld -m elf_i386 --format binary --oformat elf32-i386 -r \ - -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o - ld -m elf_i386 -r -o built-in.o initramfs_data.o - - initramfs_data.scr looks like this: -SECTIONS -{ - .init.ramfs : { *(.data) } -} - - The above example is for i386 - the parameters vary from architectures. - Eventually look up LDFLAGS_BLOB in an older version of the - arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced. - - Using .incbin has the advantage over ld that the correct flags are set - in the ELF header, as required by certain architectures. -*/ - -.section .init.ramfs,"a" -.incbin "usr/initramfs_data.cpio.gz" diff --git a/usr/initramfs_data.lzma.S b/usr/initramfs_data.lzma.S deleted file mode 100644 index e11469e4856..00000000000 --- a/usr/initramfs_data.lzma.S +++ /dev/null @@ -1,29 +0,0 @@ -/* - initramfs_data includes the compressed binary that is the - filesystem used for early user space. - Note: Older versions of "as" (prior to binutils 2.11.90.0.23 - released on 2001-07-14) dit not support .incbin. - If you are forced to use older binutils than that then the - following trick can be applied to create the resulting binary: - - - ld -m elf_i386 --format binary --oformat elf32-i386 -r \ - -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o - ld -m elf_i386 -r -o built-in.o initramfs_data.o - - initramfs_data.scr looks like this: -SECTIONS -{ - .init.ramfs : { *(.data) } -} - - The above example is for i386 - the parameters vary from architectures. - Eventually look up LDFLAGS_BLOB in an older version of the - arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced. - - Using .incbin has the advantage over ld that the correct flags are set - in the ELF header, as required by certain architectures. -*/ - -.section .init.ramfs,"a" -.incbin "usr/initramfs_data.cpio.lzma" |