diff options
Diffstat (limited to 'tools/testing')
212 files changed, 11759 insertions, 67 deletions
diff --git a/tools/testing/ktest/examples/crosstests.conf b/tools/testing/ktest/examples/crosstests.conf index 46736604c26..a1203148dfa 100644 --- a/tools/testing/ktest/examples/crosstests.conf +++ b/tools/testing/ktest/examples/crosstests.conf @@ -133,12 +133,6 @@ CROSS = frv-linux ARCH = frv GCC_VER = 4.5.1 -# h8300 - failed make defconfig?? -TEST_START IF ${RUN} == h8300 || ${DO_FAILED} -CROSS = h8300-elf -ARCH = h8300 -GCC_VER = 4.5.1 - # m68k fails with error? TEST_START IF ${RUN} == m68k || ${DO_DEFAULT} CROSS = m68k-linux diff --git a/tools/testing/ktest/examples/include/patchcheck.conf b/tools/testing/ktest/examples/include/patchcheck.conf index 339d3e1700f..0eb0a5ac77d 100644 --- a/tools/testing/ktest/examples/include/patchcheck.conf +++ b/tools/testing/ktest/examples/include/patchcheck.conf @@ -14,6 +14,16 @@ PATCH_START := HEAD~3 PATCH_END := HEAD +# Use the oldconfig if build_type wasn't defined +DEFAULTS IF NOT DEFINED BUILD_TYPE +DO_BUILD_TYPE := oldconfig + +DEFAULTS ELSE +DO_BUILD_TYPE := ${BUILD_TYPE} + +DEFAULTS + + # Change PATCH_CHECKOUT to be the branch you want to test. The test will # do a git checkout of this branch before starting. Obviously both # PATCH_START and PATCH_END must be in this branch (and PATCH_START must @@ -43,6 +53,31 @@ PATCH_TEST_TYPE := boot # (space delimited) #IGNORE_WARNINGS = 39eaf7ef884dcc44f7ff1bac803ca2a1dcf43544 6edb2a8a385f0cdef51dae37ff23e74d76d8a6ce +# Instead of just checking for warnings to files that are changed +# it can be advantageous to check for any new warnings. If a +# header file is changed, it could cause a warning in a file not +# touched by the commit. To detect these kinds of warnings, you +# can use the WARNINGS_FILE option. +# +# If the variable CREATE_WARNINGS_FILE is set, this config will +# enable the WARNINGS_FILE during the patchcheck test. Also, +# before running the patchcheck test, it will create the +# warnings file. +# +DEFAULTS IF DEFINED CREATE_WARNINGS_FILE +WARNINGS_FILE = ${OUTPUT_DIR}/warnings_file + +TEST_START IF DEFINED CREATE_WARNINGS_FILE +# WARNINGS_FILE is already set by the DEFAULTS above +TEST_TYPE = make_warnings_file +# Checkout the commit before the patches to test, +# and record all the warnings that exist before the patches +# to test are added +CHECKOUT = ${PATCHCHECK_START}~1 +# Force a full build +BUILD_NOCLEAN = 0 +BUILD_TYPE = ${DO_BUILD_TYPE} + # If you are running a multi test, and the test failed on the first # test but on, say the 5th patch. If you want to restart on the # fifth patch, set PATCH_START1. This will make the first test start @@ -61,6 +96,7 @@ PATCHCHECK_TYPE = ${PATCH_TEST_TYPE} PATCHCHECK_START = ${PATCH_START1} PATCHCHECK_END = ${PATCH_END} CHECKOUT = ${PATCH_CHECKOUT} +BUILD_TYPE = ${DO_BUILD_TYPE} TEST_START IF ${TEST} == patchcheck && ${MULTI} TEST_TYPE = patchcheck @@ -72,3 +108,4 @@ PATCHCHECK_END = ${PATCH_END} CHECKOUT = ${PATCH_CHECKOUT} # Use multi to test different compilers? MAKE_CMD = CC=gcc-4.5.1 make +BUILD_TYPE = ${DO_BUILD_TYPE} diff --git a/tools/testing/ktest/examples/kvm.conf b/tools/testing/ktest/examples/kvm.conf index 831c7c5395f..fbc134f9ac6 100644 --- a/tools/testing/ktest/examples/kvm.conf +++ b/tools/testing/ktest/examples/kvm.conf @@ -10,6 +10,10 @@ MACHINE = Guest # Use virsh to read the serial console of the guest CONSOLE = virsh console ${MACHINE} +# Use SIGKILL to terminate virsh console. We can't kill virsh console +# by the default signal, SIGINT. +CLOSE_CONSOLE_SIGNAL = KILL + #*************************************# # This part is the same as test.conf # #*************************************# diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 35fc584a4ff..40631569a0f 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -18,6 +18,7 @@ $| = 1; my %opt; my %repeat_tests; my %repeats; +my %evals; #default opts my %default = ( @@ -25,6 +26,7 @@ my %default = ( "TEST_TYPE" => "build", "BUILD_TYPE" => "randconfig", "MAKE_CMD" => "make", + "CLOSE_CONSOLE_SIGNAL" => "INT", "TIMEOUT" => 120, "TMP_DIR" => "/tmp/ktest/\${MACHINE}", "SLEEP_TIME" => 60, # sleep time between tests @@ -39,6 +41,7 @@ my %default = ( "CLEAR_LOG" => 0, "BISECT_MANUAL" => 0, "BISECT_SKIP" => 1, + "BISECT_TRIES" => 1, "MIN_CONFIG_TYPE" => "boot", "SUCCESS_LINE" => "login:", "DETECT_TRIPLE_FAULT" => 1, @@ -73,6 +76,7 @@ my $ktest_config; my $version; my $have_version = 0; my $machine; +my $last_machine; my $ssh_user; my $tmpdir; my $builddir; @@ -108,6 +112,7 @@ my $scp_to_target; my $scp_to_target_install; my $power_off; my $grub_menu; +my $last_grub_menu; my $grub_file; my $grub_number; my $grub_reboot; @@ -126,6 +131,7 @@ my $start_minconfig_defined; my $output_minconfig; my $minconfig_type; my $use_output_minconfig; +my $warnings_file; my $ignore_config; my $ignore_errors; my $addconfig; @@ -134,6 +140,7 @@ my $bisect_bad_commit = ""; my $reverse_bisect; my $bisect_manual; my $bisect_skip; +my $bisect_tries; my $config_bisect_good; my $bisect_ret_good; my $bisect_ret_bad; @@ -160,6 +167,7 @@ my $timeout; my $booted_timeout; my $detect_triplefault; my $console; +my $close_console_signal; my $reboot_success_line; my $success_line; my $stop_after_success; @@ -193,6 +201,9 @@ my $patchcheck_end; # which would require more options. my $buildonly = 1; +# tell build not to worry about warnings, even when WARNINGS_FILE is set +my $warnings_ok = 0; + # set when creating a new config my $newconfig = 0; @@ -235,6 +246,7 @@ my %option_map = ( "START_MIN_CONFIG" => \$start_minconfig, "MIN_CONFIG_TYPE" => \$minconfig_type, "USE_OUTPUT_MIN_CONFIG" => \$use_output_minconfig, + "WARNINGS_FILE" => \$warnings_file, "IGNORE_CONFIG" => \$ignore_config, "TEST" => \$run_test, "ADD_CONFIG" => \$addconfig, @@ -266,6 +278,7 @@ my %option_map = ( "IGNORE_ERRORS" => \$ignore_errors, "BISECT_MANUAL" => \$bisect_manual, "BISECT_SKIP" => \$bisect_skip, + "BISECT_TRIES" => \$bisect_tries, "CONFIG_BISECT_GOOD" => \$config_bisect_good, "BISECT_RET_GOOD" => \$bisect_ret_good, "BISECT_RET_BAD" => \$bisect_ret_bad, @@ -278,6 +291,7 @@ my %option_map = ( "TIMEOUT" => \$timeout, "BOOTED_TIMEOUT" => \$booted_timeout, "CONSOLE" => \$console, + "CLOSE_CONSOLE_SIGNAL" => \$close_console_signal, "DETECT_TRIPLE_FAULT" => \$detect_triplefault, "SUCCESS_LINE" => \$success_line, "REBOOT_SUCCESS_LINE" => \$reboot_success_line, @@ -438,6 +452,27 @@ $config_help{"REBOOT_SCRIPT"} = << "EOF" EOF ; +sub _logit { + if (defined($opt{"LOG_FILE"})) { + open(OUT, ">> $opt{LOG_FILE}") or die "Can't write to $opt{LOG_FILE}"; + print OUT @_; + close(OUT); + } +} + +sub logit { + if (defined($opt{"LOG_FILE"})) { + _logit @_; + } else { + print @_; + } +} + +sub doprint { + print @_; + _logit @_; +} + sub read_prompt { my ($cancel, $prompt) = @_; @@ -619,6 +654,18 @@ sub set_value { # Note if a test is something other than build, then we # will need other manditory options. if ($prvalue ne "install") { + # for bisect, we need to check BISECT_TYPE + if ($prvalue ne "bisect") { + $buildonly = 0; + } + } else { + # install still limits some manditory options. + $buildonly = 2; + } + } + + if ($buildonly && $lvalue =~ /^BISECT_TYPE(\[.*\])?$/ && $prvalue ne "build") { + if ($prvalue ne "install") { $buildonly = 0; } else { # install still limits some manditory options. @@ -643,6 +690,22 @@ sub set_value { } } +sub set_eval { + my ($lvalue, $rvalue, $name) = @_; + + my $prvalue = process_variables($rvalue); + my $arr; + + if (defined($evals{$lvalue})) { + $arr = $evals{$lvalue}; + } else { + $arr = []; + $evals{$lvalue} = $arr; + } + + push @{$arr}, $rvalue; +} + sub set_variable { my ($lvalue, $rvalue) = @_; @@ -928,6 +991,20 @@ sub __read_config { $test_case = 1; } + } elsif (/^\s*([A-Z_\[\]\d]+)\s*=~\s*(.*?)\s*$/) { + + next if ($skip); + + my $lvalue = $1; + my $rvalue = $2; + + if ($default || $lvalue =~ /\[\d+\]$/) { + set_eval($lvalue, $rvalue, $name); + } else { + my $val = "$lvalue\[$test_num\]"; + set_eval($val, $rvalue, $name); + } + } elsif (/^\s*([A-Z_\[\]\d]+)\s*=\s*(.*?)\s*$/) { next if ($skip); @@ -1062,7 +1139,7 @@ sub read_config { } sub __eval_option { - my ($option, $i) = @_; + my ($name, $option, $i) = @_; # Add space to evaluate the character before $ $option = " $option"; @@ -1094,7 +1171,11 @@ sub __eval_option { my $o = "$var\[$i\]"; my $parento = "$var\[$parent\]"; - if (defined($opt{$o})) { + # If a variable contains itself, use the default var + if (($var eq $name) && defined($opt{$var})) { + $o = $opt{$var}; + $retval = "$retval$o"; + } elsif (defined($opt{$o})) { $o = $opt{$o}; $retval = "$retval$o"; } elsif ($repeated && defined($opt{$parento})) { @@ -1103,6 +1184,10 @@ sub __eval_option { } elsif (defined($opt{$var})) { $o = $opt{$var}; $retval = "$retval$o"; + } elsif ($var eq "KERNEL_VERSION" && defined($make)) { + # special option KERNEL_VERSION uses kernel version + get_version(); + $retval = "$retval$version"; } else { $retval = "$retval\$\{$var\}"; } @@ -1117,8 +1202,35 @@ sub __eval_option { return $retval; } +sub process_evals { + my ($name, $option, $i) = @_; + + my $option_name = "$name\[$i\]"; + my $ev; + + my $old_option = $option; + + if (defined($evals{$option_name})) { + $ev = $evals{$option_name}; + } elsif (defined($evals{$name})) { + $ev = $evals{$name}; + } else { + return $option; + } + + for my $e (@{$ev}) { + eval "\$option =~ $e"; + } + + if ($option ne $old_option) { + doprint("$name changed from '$old_option' to '$option'\n"); + } + + return $option; +} + sub eval_option { - my ($option, $i) = @_; + my ($name, $option, $i) = @_; my $prev = ""; @@ -1134,31 +1246,12 @@ sub eval_option { "Check for recursive variables\n"; } $prev = $option; - $option = __eval_option($option, $i); - } - - return $option; -} - -sub _logit { - if (defined($opt{"LOG_FILE"})) { - open(OUT, ">> $opt{LOG_FILE}") or die "Can't write to $opt{LOG_FILE}"; - print OUT @_; - close(OUT); + $option = __eval_option($name, $option, $i); } -} -sub logit { - if (defined($opt{"LOG_FILE"})) { - _logit @_; - } else { - print @_; - } -} + $option = process_evals($name, $option, $i); -sub doprint { - print @_; - _logit @_; + return $option; } sub run_command; @@ -1191,11 +1284,24 @@ sub reboot { } if (defined($time)) { - if (wait_for_monitor($time, $reboot_success_line)) { + + # We only want to get to the new kernel, don't fail + # if we stumble over a call trace. + my $save_ignore_errors = $ignore_errors; + $ignore_errors = 1; + + # Look for the good kernel to boot + if (wait_for_monitor($time, "Linux version")) { # reboot got stuck? doprint "Reboot did not finish. Forcing power cycle\n"; run_command "$power_cycle"; } + + $ignore_errors = $save_ignore_errors; + + # Still need to wait for the reboot to finish + wait_for_monitor($time, $reboot_success_line); + end_monitor; } } @@ -1260,7 +1366,7 @@ sub close_console { my ($fp, $pid) = @_; doprint "kill child process $pid\n"; - kill 2, $pid; + kill $close_console_signal, $pid; print "closing!\n"; close($fp); @@ -1279,6 +1385,7 @@ sub start_monitor { } sub end_monitor { + return if (!defined $console); if (--$monitor_cnt) { return; } @@ -1503,7 +1610,9 @@ sub run_scp_mod { sub get_grub2_index { - return if (defined($grub_number)); + return if (defined($grub_number) && defined($last_grub_menu) && + $last_grub_menu eq $grub_menu && defined($last_machine) && + $last_machine eq $machine); doprint "Find grub2 menu ... "; $grub_number = -1; @@ -1530,6 +1639,8 @@ sub get_grub2_index { die "Could not find '$grub_menu' in $grub_file on $machine" if (!$found); doprint "$grub_number\n"; + $last_grub_menu = $grub_menu; + $last_machine = $machine; } sub get_grub_index { @@ -1542,7 +1653,9 @@ sub get_grub_index { if ($reboot_type ne "grub") { return; } - return if (defined($grub_number)); + return if (defined($grub_number) && defined($last_grub_menu) && + $last_grub_menu eq $grub_menu && defined($last_machine) && + $last_machine eq $machine); doprint "Find grub menu ... "; $grub_number = -1; @@ -1569,6 +1682,8 @@ sub get_grub_index { die "Could not find '$grub_menu' in /boot/grub/menu on $machine" if (!$found); doprint "$grub_number\n"; + $last_grub_menu = $grub_menu; + $last_machine = $machine; } sub wait_for_input @@ -1585,7 +1700,7 @@ sub wait_for_input $rin = ''; vec($rin, fileno($fp), 1) = 1; - $ready = select($rin, undef, undef, $time); + ($ready, $time) = select($rin, undef, undef, $time); $line = ""; @@ -1751,7 +1866,7 @@ sub monitor { # We already booted into the kernel we are testing, # but now we booted into another kernel? # Consider this a triple fault. - doprint "Aleady booted in Linux kernel $version, but now\n"; + doprint "Already booted in Linux kernel $version, but now\n"; doprint "we booted into Linux kernel $1.\n"; doprint "Assuming that this is a triple fault.\n"; doprint "To disable this: set DETECT_TRIPLE_FAULT to 0\n"; @@ -1891,23 +2006,102 @@ sub get_version { sub start_monitor_and_boot { # Make sure the stable kernel has finished booting - start_monitor; - wait_for_monitor 5; - end_monitor; + + # Install bisects, don't need console + if (defined $console) { + start_monitor; + wait_for_monitor 5; + end_monitor; + } get_grub_index; get_version; install; - start_monitor; + start_monitor if (defined $console); return monitor; } +my $check_build_re = ".*:.*(warning|error|Error):.*"; +my $utf8_quote = "\\x{e2}\\x{80}(\\x{98}|\\x{99})"; + +sub process_warning_line { + my ($line) = @_; + + chomp $line; + + # for distcc heterogeneous systems, some compilers + # do things differently causing warning lines + # to be slightly different. This makes an attempt + # to fixe those issues. + + # chop off the index into the line + # using distcc, some compilers give different indexes + # depending on white space + $line =~ s/^(\s*\S+:\d+:)\d+/$1/; + + # Some compilers use UTF-8 extended for quotes and some don't. + $line =~ s/$utf8_quote/'/g; + + return $line; +} + +# Read buildlog and check against warnings file for any +# new warnings. +# +# Returns 1 if OK +# 0 otherwise sub check_buildlog { + return 1 if (!defined $warnings_file); + + my %warnings_list; + + # Failed builds should not reboot the target + my $save_no_reboot = $no_reboot; + $no_reboot = 1; + + if (-f $warnings_file) { + open(IN, $warnings_file) or + dodie "Error opening $warnings_file"; + + while (<IN>) { + if (/$check_build_re/) { + my $warning = process_warning_line $_; + + $warnings_list{$warning} = 1; + } + } + close(IN); + } + + # If warnings file didn't exist, and WARNINGS_FILE exist, + # then we fail on any warning! + + open(IN, $buildlog) or dodie "Can't open $buildlog"; + while (<IN>) { + if (/$check_build_re/) { + my $warning = process_warning_line $_; + + if (!defined $warnings_list{$warning}) { + fail "New warning found (not in $warnings_file)\n$_\n"; + $no_reboot = $save_no_reboot; + return 0; + } + } + } + $no_reboot = $save_no_reboot; + close(IN); +} + +sub check_patch_buildlog { my ($patch) = @_; my @files = `git show $patch | diffstat -l`; + foreach my $file (@files) { + chomp $file; + } + open(IN, "git show $patch |") or dodie "failed to show $patch"; while (<IN>) { @@ -2393,12 +2587,29 @@ sub run_bisect { $buildtype = "useconfig:$minconfig"; } - my $ret = run_bisect_test $type, $buildtype; + # If the user sets bisect_tries to less than 1, then no tries + # is a success. + my $ret = 1; - if ($bisect_manual) { + # Still let the user manually decide that though. + if ($bisect_tries < 1 && $bisect_manual) { $ret = answer_bisect; } + for (my $i = 0; $i < $bisect_tries; $i++) { + if ($bisect_tries > 1) { + my $t = $i + 1; + doprint("Running bisect trial $t of $bisect_tries:\n"); + } + $ret = run_bisect_test $type, $buildtype; + + if ($bisect_manual) { + $ret = answer_bisect; + } + + last if (!$ret); + } + # Are we looking for where it worked, not failed? if ($reverse_bisect && $ret >= 0) { $ret = !$ret; @@ -3055,11 +3266,13 @@ sub patchcheck { build "oldconfig" or return 0; } - - if (!defined($ignored_warnings{$sha1})) { - check_buildlog $sha1 or return 0; + # No need to do per patch checking if warnings file exists + if (!defined($warnings_file) && !defined($ignored_warnings{$sha1})) { + check_patch_buildlog $sha1 or return 0; } + check_buildlog or return 0; + next if ($type eq "build"); my $failed = 0; @@ -3617,6 +3830,39 @@ sub make_min_config { return 1; } +sub make_warnings_file { + my ($i) = @_; + + if (!defined($warnings_file)) { + dodie "Must define WARNINGS_FILE for make_warnings_file test"; + } + + if ($build_type eq "nobuild") { + dodie "BUILD_TYPE can not be 'nobuild' for make_warnings_file test"; + } + + build $build_type or dodie "Failed to build"; + + open(OUT, ">$warnings_file") or dodie "Can't create $warnings_file"; + + open(IN, $buildlog) or dodie "Can't open $buildlog"; + while (<IN>) { + + # Some compilers use UTF-8 extended for quotes + # for distcc heterogeneous systems, this causes issues + s/$utf8_quote/'/g; + + if (/$check_build_re/) { + print OUT; + } + } + close(IN); + + close(OUT); + + success $i; +} + $#ARGV < 1 or die "ktest.pl version: $VERSION\n usage: ktest.pl config-file\n"; if ($#ARGV == 0) { @@ -3662,7 +3908,7 @@ EOF read_config $ktest_config; if (defined($opt{"LOG_FILE"})) { - $opt{"LOG_FILE"} = eval_option($opt{"LOG_FILE"}, -1); + $opt{"LOG_FILE"} = eval_option("LOG_FILE", $opt{"LOG_FILE"}, -1); } # Append any configs entered in manually to the config file. @@ -3739,7 +3985,7 @@ sub set_test_option { my $option = __set_test_option($name, $i); return $option if (!defined($option)); - return eval_option($option, $i); + return eval_option($name, $option, $i); } # First we need to do is the builds @@ -3757,6 +4003,18 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { my $makecmd = set_test_option("MAKE_CMD", $i); + $outputdir = set_test_option("OUTPUT_DIR", $i); + $builddir = set_test_option("BUILD_DIR", $i); + + chdir $builddir || die "can't change directory to $builddir"; + + if (!-d $outputdir) { + mkpath($outputdir) or + die "can't create $outputdir"; + } + + $make = "$makecmd O=$outputdir"; + # Load all the options into their mapped variable names foreach my $opt (keys %option_map) { ${$option_map{$opt}} = set_test_option($opt, $i); @@ -3781,13 +4039,9 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { $start_minconfig = $minconfig; } - chdir $builddir || die "can't change directory to $builddir"; - - foreach my $dir ($tmpdir, $outputdir) { - if (!-d $dir) { - mkpath($dir) or - die "can't create $dir"; - } + if (!-d $tmpdir) { + mkpath($tmpdir) or + die "can't create $tmpdir"; } $ENV{"SSH_USER"} = $ssh_user; @@ -3796,7 +4050,6 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { $buildlog = "$tmpdir/buildlog-$machine"; $testlog = "$tmpdir/testlog-$machine"; $dmesg = "$tmpdir/dmesg-$machine"; - $make = "$makecmd O=$outputdir"; $output_config = "$outputdir/.config"; if (!$buildonly) { @@ -3818,9 +4071,9 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { $run_type = $bisect_type; } elsif ($test_type eq "config_bisect") { $run_type = $config_bisect_type; - } - - if ($test_type eq "make_min_config") { + } elsif ($test_type eq "make_min_config") { + $run_type = ""; + } elsif ($test_type eq "make_warnings_file") { $run_type = ""; } @@ -3877,10 +4130,15 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { } elsif ($test_type eq "make_min_config") { make_min_config $i; next; + } elsif ($test_type eq "make_warnings_file") { + $no_reboot = 1; + make_warnings_file $i; + next; } if ($build_type ne "nobuild") { build $build_type or next; + check_buildlog or next; } if ($test_type eq "install") { diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index 4012e933034..172eec4517f 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -328,6 +328,13 @@ # For a virtual machine with guest name "Guest". #CONSOLE = virsh console Guest +# Signal to send to kill console. +# ktest.pl will create a child process to monitor the console. +# When the console is finished, ktest will kill the child process +# with this signal. +# (default INT) +#CLOSE_CONSOLE_SIGNAL = HUP + # Required version ending to differentiate the test # from other linux builds on the system. #LOCALVERSION = -test @@ -793,6 +800,20 @@ # Example for a virtual guest call "Guest". #POWER_OFF = virsh destroy Guest +# To have the build fail on "new" warnings, create a file that +# contains a list of all known warnings (they must match exactly +# to the line with 'warning:', 'error:' or 'Error:'. If the option +# WARNINGS_FILE is set, then that file will be read, and if the +# build detects a warning, it will examine this file and if the +# warning does not exist in it, it will fail the build. +# +# Note, if this option is defined to a file that does not exist +# then any warning will fail the build. +# (see make_warnings_file below) +# +# (optional, default undefined) +#WARNINGS_FILE = ${OUTPUT_DIR}/warnings_file + # The way to execute a command on the target # (default ssh $SSH_USER@$MACHINE $SSH_COMMAND";) # The variables SSH_USER, MACHINE and SSH_COMMAND are defined @@ -1007,6 +1028,20 @@ # BISECT_BAD with BISECT_CHECK = good or # BISECT_CHECK = bad, respectively. # +# BISECT_TRIES = 5 (optional, default 1) +# +# For those cases that it takes several tries to hit a bug, +# the BISECT_TRIES is useful. It is the number of times the +# test is ran before it says the kernel is good. The first failure +# will stop trying and mark the current SHA1 as bad. +# +# Note, as with all race bugs, there's no guarantee that if +# it succeeds, it is really a good bisect. But it helps in case +# the bug is some what reliable. +# +# You can set BISECT_TRIES to zero, and all tests will be considered +# good, unless you also set BISECT_MANUAL. +# # BISECT_RET_GOOD = 0 (optional, default undefined) # # In case the specificed test returns something other than just @@ -1222,3 +1257,33 @@ # MIN_CONFIG_TYPE = test # TEST = ssh ${USER}@${MACHINE} echo hi # +# +# +# +# For TEST_TYPE = make_warnings_file +# +# If you want the build to fail when a new warning is discovered +# you set the WARNINGS_FILE to point to a file of known warnings. +# +# The test "make_warnings_file" will let you create a new warnings +# file before you run other tests, like patchcheck. +# +# What this test does is to run just a build, you still need to +# specify BUILD_TYPE to tell the test what type of config to use. +# A BUILD_TYPE of nobuild will fail this test. +# +# The test will do the build and scan for all warnings. Any warning +# it discovers will be saved in the WARNINGS_FILE (required) option. +# +# It is recommended (but not necessary) to make sure BUILD_NOCLEAN is +# off, so that a full build is done (make mrproper is performed). +# That way, all warnings will be captured. +# +# Example: +# +# TEST_TYPE = make_warnings_file +# WARNINGS_FILE = ${OUTPUT_DIR} +# BUILD_TYPE = useconfig:oldconfig +# CHECKOUT = v3.8 +# BUILD_NOCLEAN = 0 +# diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 85baf11e2ac..e66e710cc59 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -1,4 +1,16 @@ -TARGETS = breakpoints kcmp mqueue vm cpu-hotplug memory-hotplug +TARGETS = breakpoints +TARGETS += cpu-hotplug +TARGETS += efivarfs +TARGETS += kcmp +TARGETS += memory-hotplug +TARGETS += mqueue +TARGETS += net +TARGETS += ptrace +TARGETS += timers +TARGETS += vm +TARGETS += powerpc +TARGETS += user +TARGETS += sysctl all: for TARGET in $(TARGETS); do \ diff --git a/tools/testing/selftests/README.txt b/tools/testing/selftests/README.txt new file mode 100644 index 00000000000..5e2faf9c55d --- /dev/null +++ b/tools/testing/selftests/README.txt @@ -0,0 +1,42 @@ +Linux Kernel Selftests + +The kernel contains a set of "self tests" under the tools/testing/selftests/ +directory. These are intended to be small unit tests to exercise individual +code paths in the kernel. + +Running the selftests +===================== + +To build the tests: + + $ make -C tools/testing/selftests + + +To run the tests: + + $ make -C tools/testing/selftests run_tests + +- note that some tests will require root privileges. + + +To run only tests targetted for a single subsystem: + + $ make -C tools/testing/selftests TARGETS=cpu-hotplug run_tests + +See the top-level tools/testing/selftests/Makefile for the list of all possible +targets. + + +Contributing new tests +====================== + +In general, the rules for for selftests are + + * Do as much as you can if you're not root; + + * Don't take too long; + + * Don't break the build on any architecture, and + + * Don't cause the top-level "make run_tests" to fail if your feature is + unconfigured. diff --git a/tools/testing/selftests/cpu-hotplug/Makefile b/tools/testing/selftests/cpu-hotplug/Makefile index 12657a5e4bf..790c23a9db4 100644 --- a/tools/testing/selftests/cpu-hotplug/Makefile +++ b/tools/testing/selftests/cpu-hotplug/Makefile @@ -1,6 +1,6 @@ all: run_tests: - @./on-off-test.sh || echo "cpu-hotplug selftests: [FAIL]" + @/bin/bash ./on-off-test.sh || echo "cpu-hotplug selftests: [FAIL]" clean: diff --git a/tools/testing/selftests/efivarfs/Makefile b/tools/testing/selftests/efivarfs/Makefile new file mode 100644 index 00000000000..29e8c6bc81b --- /dev/null +++ b/tools/testing/selftests/efivarfs/Makefile @@ -0,0 +1,12 @@ +CC = $(CROSS_COMPILE)gcc +CFLAGS = -Wall + +test_objs = open-unlink create-read + +all: $(test_objs) + +run_tests: all + @/bin/bash ./efivarfs.sh || echo "efivarfs selftests: [FAIL]" + +clean: + rm -f $(test_objs) diff --git a/tools/testing/selftests/efivarfs/create-read.c b/tools/testing/selftests/efivarfs/create-read.c new file mode 100644 index 00000000000..7feef188096 --- /dev/null +++ b/tools/testing/selftests/efivarfs/create-read.c @@ -0,0 +1,38 @@ +#include <stdio.h> +#include <stdint.h> +#include <stdlib.h> +#include <unistd.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <errno.h> +#include <string.h> + +int main(int argc, char **argv) +{ + const char *path; + char buf[4]; + int fd, rc; + + if (argc < 2) { + fprintf(stderr, "usage: %s <path>\n", argv[0]); + return EXIT_FAILURE; + } + + path = argv[1]; + + /* create a test variable */ + fd = open(path, O_RDWR | O_CREAT, 0600); + if (fd < 0) { + perror("open(O_WRONLY)"); + return EXIT_FAILURE; + } + + rc = read(fd, buf, sizeof(buf)); + if (rc != 0) { + fprintf(stderr, "Reading a new var should return EOF\n"); + return EXIT_FAILURE; + } + + return EXIT_SUCCESS; +} diff --git a/tools/testing/selftests/efivarfs/efivarfs.sh b/tools/testing/selftests/efivarfs/efivarfs.sh new file mode 100644 index 00000000000..77edcdcc016 --- /dev/null +++ b/tools/testing/selftests/efivarfs/efivarfs.sh @@ -0,0 +1,198 @@ +#!/bin/bash + +efivarfs_mount=/sys/firmware/efi/efivars +test_guid=210be57c-9849-4fc7-a635-e6382d1aec27 + +check_prereqs() +{ + local msg="skip all tests:" + + if [ $UID != 0 ]; then + echo $msg must be run as root >&2 + exit 0 + fi + + if ! grep -q "^\S\+ $efivarfs_mount efivarfs" /proc/mounts; then + echo $msg efivarfs is not mounted on $efivarfs_mount >&2 + exit 0 + fi +} + +run_test() +{ + local test="$1" + + echo "--------------------" + echo "running $test" + echo "--------------------" + + if [ "$(type -t $test)" = 'function' ]; then + ( $test ) + else + ( ./$test ) + fi + + if [ $? -ne 0 ]; then + echo " [FAIL]" + rc=1 + else + echo " [PASS]" + fi +} + +test_create() +{ + local attrs='\x07\x00\x00\x00' + local file=$efivarfs_mount/$FUNCNAME-$test_guid + + printf "$attrs\x00" > $file + + if [ ! -e $file ]; then + echo "$file couldn't be created" >&2 + exit 1 + fi + + if [ $(stat -c %s $file) -ne 5 ]; then + echo "$file has invalid size" >&2 + exit 1 + fi +} + +test_create_empty() +{ + local file=$efivarfs_mount/$FUNCNAME-$test_guid + + : > $file + + if [ ! -e $file ]; then + echo "$file can not be created without writing" >&2 + exit 1 + fi +} + +test_create_read() +{ + local file=$efivarfs_mount/$FUNCNAME-$test_guid + ./create-read $file +} + +test_delete() +{ + local attrs='\x07\x00\x00\x00' + local file=$efivarfs_mount/$FUNCNAME-$test_guid + + printf "$attrs\x00" > $file + + if [ ! -e $file ]; then + echo "$file couldn't be created" >&2 + exit 1 + fi + + rm $file + + if [ -e $file ]; then + echo "$file couldn't be deleted" >&2 + exit 1 + fi + +} + +# test that we can remove a variable by issuing a write with only +# attributes specified +test_zero_size_delete() +{ + local attrs='\x07\x00\x00\x00' + local file=$efivarfs_mount/$FUNCNAME-$test_guid + + printf "$attrs\x00" > $file + + if [ ! -e $file ]; then + echo "$file does not exist" >&2 + exit 1 + fi + + printf "$attrs" > $file + + if [ -e $file ]; then + echo "$file should have been deleted" >&2 + exit 1 + fi +} + +test_open_unlink() +{ + local file=$efivarfs_mount/$FUNCNAME-$test_guid + ./open-unlink $file +} + +# test that we can create a range of filenames +test_valid_filenames() +{ + local attrs='\x07\x00\x00\x00' + local ret=0 + + local file_list="abc dump-type0-11-1-1362436005 1234 -" + for f in $file_list; do + local file=$efivarfs_mount/$f-$test_guid + + printf "$attrs\x00" > $file + + if [ ! -e $file ]; then + echo "$file could not be created" >&2 + ret=1 + else + rm $file + fi + done + + exit $ret +} + +test_invalid_filenames() +{ + local attrs='\x07\x00\x00\x00' + local ret=0 + + local file_list=" + -1234-1234-1234-123456789abc + foo + foo-bar + -foo- + foo-barbazba-foob-foob-foob-foobarbazfoo + foo------------------------------------- + -12345678-1234-1234-1234-123456789abc + a-12345678=1234-1234-1234-123456789abc + a-12345678-1234=1234-1234-123456789abc + a-12345678-1234-1234=1234-123456789abc + a-12345678-1234-1234-1234=123456789abc + 1112345678-1234-1234-1234-123456789abc" + + for f in $file_list; do + local file=$efivarfs_mount/$f + + printf "$attrs\x00" 2>/dev/null > $file + + if [ -e $file ]; then + echo "Creating $file should have failed" >&2 + rm $file + ret=1 + fi + done + + exit $ret +} + +check_prereqs + +rc=0 + +run_test test_create +run_test test_create_empty +run_test test_create_read +run_test test_delete +run_test test_zero_size_delete +run_test test_open_unlink +run_test test_valid_filenames +run_test test_invalid_filenames + +exit $rc diff --git a/tools/testing/selftests/efivarfs/open-unlink.c b/tools/testing/selftests/efivarfs/open-unlink.c new file mode 100644 index 00000000000..8c0764407b3 --- /dev/null +++ b/tools/testing/selftests/efivarfs/open-unlink.c @@ -0,0 +1,63 @@ +#include <stdio.h> +#include <stdint.h> +#include <stdlib.h> +#include <unistd.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> + +int main(int argc, char **argv) +{ + const char *path; + char buf[5]; + int fd, rc; + + if (argc < 2) { + fprintf(stderr, "usage: %s <path>\n", argv[0]); + return EXIT_FAILURE; + } + + path = argv[1]; + + /* attributes: EFI_VARIABLE_NON_VOLATILE | + * EFI_VARIABLE_BOOTSERVICE_ACCESS | + * EFI_VARIABLE_RUNTIME_ACCESS + */ + *(uint32_t *)buf = 0x7; + buf[4] = 0; + + /* create a test variable */ + fd = open(path, O_WRONLY | O_CREAT); + if (fd < 0) { + perror("open(O_WRONLY)"); + return EXIT_FAILURE; + } + + rc = write(fd, buf, sizeof(buf)); + if (rc != sizeof(buf)) { + perror("write"); + return EXIT_FAILURE; + } + + close(fd); + + fd = open(path, O_RDONLY); + if (fd < 0) { + perror("open"); + return EXIT_FAILURE; + } + + if (unlink(path) < 0) { + perror("unlink"); + return EXIT_FAILURE; + } + + rc = read(fd, buf, sizeof(buf)); + if (rc > 0) { + fprintf(stderr, "reading from an unlinked variable " + "shouldn't be possible\n"); + return EXIT_FAILURE; + } + + return EXIT_SUCCESS; +} diff --git a/tools/testing/selftests/ipc/msgque.c b/tools/testing/selftests/ipc/msgque.c index d66418237d2..552f0810bff 100644 --- a/tools/testing/selftests/ipc/msgque.c +++ b/tools/testing/selftests/ipc/msgque.c @@ -193,6 +193,11 @@ int main(int argc, char **argv) int msg, pid, err; struct msgque_data msgque; + if (getuid() != 0) { + printf("Please run the test as root - Exiting.\n"); + exit(1); + } + msgque.key = ftok(argv[0], 822155650); if (msgque.key == -1) { printf("Can't make key\n"); @@ -201,6 +206,7 @@ int main(int argc, char **argv) msgque.msq_id = msgget(msgque.key, IPC_CREAT | IPC_EXCL | 0666); if (msgque.msq_id == -1) { + err = -errno; printf("Can't create queue\n"); goto err_out; } diff --git a/tools/testing/selftests/kcmp/.gitignore b/tools/testing/selftests/kcmp/.gitignore new file mode 100644 index 00000000000..5a9b3732b2d --- /dev/null +++ b/tools/testing/selftests/kcmp/.gitignore @@ -0,0 +1,2 @@ +kcmp_test +kcmp-test-file diff --git a/tools/testing/selftests/kcmp/Makefile b/tools/testing/selftests/kcmp/Makefile index 56eb5523dbb..d7d6bbeeff2 100644 --- a/tools/testing/selftests/kcmp/Makefile +++ b/tools/testing/selftests/kcmp/Makefile @@ -25,5 +25,4 @@ run_tests: all @./kcmp_test || echo "kcmp_test: [FAIL]" clean: - rm -fr ./run_test - rm -fr ./test-file + $(RM) kcmp_test kcmp-test-file diff --git a/tools/testing/selftests/memory-hotplug/Makefile b/tools/testing/selftests/memory-hotplug/Makefile index 0f49c3f5f58..058c76f5d10 100644 --- a/tools/testing/selftests/memory-hotplug/Makefile +++ b/tools/testing/selftests/memory-hotplug/Makefile @@ -1,6 +1,6 @@ all: run_tests: - @./on-off-test.sh || echo "memory-hotplug selftests: [FAIL]" + @/bin/bash ./on-off-test.sh || echo "memory-hotplug selftests: [FAIL]" clean: diff --git a/tools/testing/selftests/net/.gitignore b/tools/testing/selftests/net/.gitignore new file mode 100644 index 00000000000..00326629d4a --- /dev/null +++ b/tools/testing/selftests/net/.gitignore @@ -0,0 +1,3 @@ +socket +psock_fanout +psock_tpacket diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile new file mode 100644 index 00000000000..c7493b8f9b0 --- /dev/null +++ b/tools/testing/selftests/net/Makefile @@ -0,0 +1,25 @@ +# Makefile for net selftests + +CC = $(CROSS_COMPILE)gcc +CFLAGS = -Wall -O2 -g + +CFLAGS += -I../../../../usr/include/ + +NET_PROGS = socket psock_fanout psock_tpacket + +all: $(NET_PROGS) +%: %.c + $(CC) $(CFLAGS) -o $@ $^ + +run_tests: all + @/bin/sh ./run_netsocktests || echo "sockettests: [FAIL]" + @/bin/sh ./run_afpackettests || echo "afpackettests: [FAIL]" + @if /sbin/modprobe test_bpf ; then \ + /sbin/rmmod test_bpf; \ + echo "test_bpf: ok"; \ + else \ + echo "test_bpf: [FAIL]"; \ + exit 1; \ + fi +clean: + $(RM) $(NET_PROGS) diff --git a/tools/testing/selftests/net/psock_fanout.c b/tools/testing/selftests/net/psock_fanout.c new file mode 100644 index 00000000000..57b9c2b7c4f --- /dev/null +++ b/tools/testing/selftests/net/psock_fanout.c @@ -0,0 +1,312 @@ +/* + * Copyright 2013 Google Inc. + * Author: Willem de Bruijn (willemb@google.com) + * + * A basic test of packet socket fanout behavior. + * + * Control: + * - create fanout fails as expected with illegal flag combinations + * - join fanout fails as expected with diverging types or flags + * + * Datapath: + * Open a pair of packet sockets and a pair of INET sockets, send a known + * number of packets across the two INET sockets and count the number of + * packets enqueued onto the two packet sockets. + * + * The test currently runs for + * - PACKET_FANOUT_HASH + * - PACKET_FANOUT_HASH with PACKET_FANOUT_FLAG_ROLLOVER + * - PACKET_FANOUT_LB + * - PACKET_FANOUT_CPU + * - PACKET_FANOUT_ROLLOVER + * + * Todo: + * - functionality: PACKET_FANOUT_FLAG_DEFRAG + * + * License (GPLv2): + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#define _GNU_SOURCE /* for sched_setaffinity */ + +#include <arpa/inet.h> +#include <errno.h> +#include <fcntl.h> +#include <linux/filter.h> +#include <linux/if_packet.h> +#include <net/ethernet.h> +#include <netinet/ip.h> +#include <netinet/udp.h> +#include <poll.h> +#include <sched.h> +#include <stdint.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <sys/mman.h> +#include <sys/socket.h> +#include <sys/stat.h> +#include <sys/types.h> +#include <unistd.h> + +#include "psock_lib.h" + +#define RING_NUM_FRAMES 20 + +/* Open a socket in a given fanout mode. + * @return -1 if mode is bad, a valid socket otherwise */ +static int sock_fanout_open(uint16_t typeflags, int num_packets) +{ + int fd, val; + + fd = socket(PF_PACKET, SOCK_DGRAM, htons(ETH_P_IP)); + if (fd < 0) { + perror("socket packet"); + exit(1); + } + + /* fanout group ID is always 0: tests whether old groups are deleted */ + val = ((int) typeflags) << 16; + if (setsockopt(fd, SOL_PACKET, PACKET_FANOUT, &val, sizeof(val))) { + if (close(fd)) { + perror("close packet"); + exit(1); + } + return -1; + } + + pair_udp_setfilter(fd); + return fd; +} + +static char *sock_fanout_open_ring(int fd) +{ + struct tpacket_req req = { + .tp_block_size = getpagesize(), + .tp_frame_size = getpagesize(), + .tp_block_nr = RING_NUM_FRAMES, + .tp_frame_nr = RING_NUM_FRAMES, + }; + char *ring; + int val = TPACKET_V2; + + if (setsockopt(fd, SOL_PACKET, PACKET_VERSION, (void *) &val, + sizeof(val))) { + perror("packetsock ring setsockopt version"); + exit(1); + } + if (setsockopt(fd, SOL_PACKET, PACKET_RX_RING, (void *) &req, + sizeof(req))) { + perror("packetsock ring setsockopt"); + exit(1); + } + + ring = mmap(0, req.tp_block_size * req.tp_block_nr, + PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); + if (!ring) { + fprintf(stderr, "packetsock ring mmap\n"); + exit(1); + } + + return ring; +} + +static int sock_fanout_read_ring(int fd, void *ring) +{ + struct tpacket2_hdr *header = ring; + int count = 0; + + while (header->tp_status & TP_STATUS_USER && count < RING_NUM_FRAMES) { + count++; + header = ring + (count * getpagesize()); + } + + return count; +} + +static int sock_fanout_read(int fds[], char *rings[], const int expect[]) +{ + int ret[2]; + + ret[0] = sock_fanout_read_ring(fds[0], rings[0]); + ret[1] = sock_fanout_read_ring(fds[1], rings[1]); + + fprintf(stderr, "info: count=%d,%d, expect=%d,%d\n", + ret[0], ret[1], expect[0], expect[1]); + + if ((!(ret[0] == expect[0] && ret[1] == expect[1])) && + (!(ret[0] == expect[1] && ret[1] == expect[0]))) { + fprintf(stderr, "ERROR: incorrect queue lengths\n"); + return 1; + } + + return 0; +} + +/* Test illegal mode + flag combination */ +static void test_control_single(void) +{ + fprintf(stderr, "test: control single socket\n"); + + if (sock_fanout_open(PACKET_FANOUT_ROLLOVER | + PACKET_FANOUT_FLAG_ROLLOVER, 0) != -1) { + fprintf(stderr, "ERROR: opened socket with dual rollover\n"); + exit(1); + } +} + +/* Test illegal group with different modes or flags */ +static void test_control_group(void) +{ + int fds[2]; + + fprintf(stderr, "test: control multiple sockets\n"); + + fds[0] = sock_fanout_open(PACKET_FANOUT_HASH, 20); + if (fds[0] == -1) { + fprintf(stderr, "ERROR: failed to open HASH socket\n"); + exit(1); + } + if (sock_fanout_open(PACKET_FANOUT_HASH | + PACKET_FANOUT_FLAG_DEFRAG, 10) != -1) { + fprintf(stderr, "ERROR: joined group with wrong flag defrag\n"); + exit(1); + } + if (sock_fanout_open(PACKET_FANOUT_HASH | + PACKET_FANOUT_FLAG_ROLLOVER, 10) != -1) { + fprintf(stderr, "ERROR: joined group with wrong flag ro\n"); + exit(1); + } + if (sock_fanout_open(PACKET_FANOUT_CPU, 10) != -1) { + fprintf(stderr, "ERROR: joined group with wrong mode\n"); + exit(1); + } + fds[1] = sock_fanout_open(PACKET_FANOUT_HASH, 20); + if (fds[1] == -1) { + fprintf(stderr, "ERROR: failed to join group\n"); + exit(1); + } + if (close(fds[1]) || close(fds[0])) { + fprintf(stderr, "ERROR: closing sockets\n"); + exit(1); + } +} + +static int test_datapath(uint16_t typeflags, int port_off, + const int expect1[], const int expect2[]) +{ + const int expect0[] = { 0, 0 }; + char *rings[2]; + int fds[2], fds_udp[2][2], ret; + + fprintf(stderr, "test: datapath 0x%hx\n", typeflags); + + fds[0] = sock_fanout_open(typeflags, 20); + fds[1] = sock_fanout_open(typeflags, 20); + if (fds[0] == -1 || fds[1] == -1) { + fprintf(stderr, "ERROR: failed open\n"); + exit(1); + } + rings[0] = sock_fanout_open_ring(fds[0]); + rings[1] = sock_fanout_open_ring(fds[1]); + pair_udp_open(fds_udp[0], PORT_BASE); + pair_udp_open(fds_udp[1], PORT_BASE + port_off); + sock_fanout_read(fds, rings, expect0); + + /* Send data, but not enough to overflow a queue */ + pair_udp_send(fds_udp[0], 15); + pair_udp_send(fds_udp[1], 5); + ret = sock_fanout_read(fds, rings, expect1); + + /* Send more data, overflow the queue */ + pair_udp_send(fds_udp[0], 15); + /* TODO: ensure consistent order between expect1 and expect2 */ + ret |= sock_fanout_read(fds, rings, expect2); + + if (munmap(rings[1], RING_NUM_FRAMES * getpagesize()) || + munmap(rings[0], RING_NUM_FRAMES * getpagesize())) { + fprintf(stderr, "close rings\n"); + exit(1); + } + if (close(fds_udp[1][1]) || close(fds_udp[1][0]) || + close(fds_udp[0][1]) || close(fds_udp[0][0]) || + close(fds[1]) || close(fds[0])) { + fprintf(stderr, "close datapath\n"); + exit(1); + } + + return ret; +} + +static int set_cpuaffinity(int cpuid) +{ + cpu_set_t mask; + + CPU_ZERO(&mask); + CPU_SET(cpuid, &mask); + if (sched_setaffinity(0, sizeof(mask), &mask)) { + if (errno != EINVAL) { + fprintf(stderr, "setaffinity %d\n", cpuid); + exit(1); + } + return 1; + } + + return 0; +} + +int main(int argc, char **argv) +{ + const int expect_hash[2][2] = { { 15, 5 }, { 20, 5 } }; + const int expect_hash_rb[2][2] = { { 15, 5 }, { 20, 15 } }; + const int expect_lb[2][2] = { { 10, 10 }, { 18, 17 } }; + const int expect_rb[2][2] = { { 20, 0 }, { 20, 15 } }; + const int expect_cpu0[2][2] = { { 20, 0 }, { 20, 0 } }; + const int expect_cpu1[2][2] = { { 0, 20 }, { 0, 20 } }; + int port_off = 2, tries = 5, ret; + + test_control_single(); + test_control_group(); + + /* find a set of ports that do not collide onto the same socket */ + ret = test_datapath(PACKET_FANOUT_HASH, port_off, + expect_hash[0], expect_hash[1]); + while (ret && tries--) { + fprintf(stderr, "info: trying alternate ports (%d)\n", tries); + ret = test_datapath(PACKET_FANOUT_HASH, ++port_off, + expect_hash[0], expect_hash[1]); + } + + ret |= test_datapath(PACKET_FANOUT_HASH | PACKET_FANOUT_FLAG_ROLLOVER, + port_off, expect_hash_rb[0], expect_hash_rb[1]); + ret |= test_datapath(PACKET_FANOUT_LB, + port_off, expect_lb[0], expect_lb[1]); + ret |= test_datapath(PACKET_FANOUT_ROLLOVER, + port_off, expect_rb[0], expect_rb[1]); + + set_cpuaffinity(0); + ret |= test_datapath(PACKET_FANOUT_CPU, port_off, + expect_cpu0[0], expect_cpu0[1]); + if (!set_cpuaffinity(1)) + /* TODO: test that choice alternates with previous */ + ret |= test_datapath(PACKET_FANOUT_CPU, port_off, + expect_cpu1[0], expect_cpu1[1]); + + if (ret) + return 1; + + printf("OK. All tests passed\n"); + return 0; +} diff --git a/tools/testing/selftests/net/psock_lib.h b/tools/testing/selftests/net/psock_lib.h new file mode 100644 index 00000000000..37da54ac85a --- /dev/null +++ b/tools/testing/selftests/net/psock_lib.h @@ -0,0 +1,127 @@ +/* + * Copyright 2013 Google Inc. + * Author: Willem de Bruijn <willemb@google.com> + * Daniel Borkmann <dborkman@redhat.com> + * + * License (GPLv2): + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef PSOCK_LIB_H +#define PSOCK_LIB_H + +#include <sys/types.h> +#include <sys/socket.h> +#include <string.h> +#include <arpa/inet.h> +#include <unistd.h> + +#define DATA_LEN 100 +#define DATA_CHAR 'a' + +#define PORT_BASE 8000 + +#ifndef __maybe_unused +# define __maybe_unused __attribute__ ((__unused__)) +#endif + +static __maybe_unused void pair_udp_setfilter(int fd) +{ + struct sock_filter bpf_filter[] = { + { 0x80, 0, 0, 0x00000000 }, /* LD pktlen */ + { 0x35, 0, 5, DATA_LEN }, /* JGE DATA_LEN [f goto nomatch]*/ + { 0x30, 0, 0, 0x00000050 }, /* LD ip[80] */ + { 0x15, 0, 3, DATA_CHAR }, /* JEQ DATA_CHAR [f goto nomatch]*/ + { 0x30, 0, 0, 0x00000051 }, /* LD ip[81] */ + { 0x15, 0, 1, DATA_CHAR }, /* JEQ DATA_CHAR [f goto nomatch]*/ + { 0x06, 0, 0, 0x00000060 }, /* RET match */ + { 0x06, 0, 0, 0x00000000 }, /* RET no match */ + }; + struct sock_fprog bpf_prog; + + bpf_prog.filter = bpf_filter; + bpf_prog.len = sizeof(bpf_filter) / sizeof(struct sock_filter); + if (setsockopt(fd, SOL_SOCKET, SO_ATTACH_FILTER, &bpf_prog, + sizeof(bpf_prog))) { + perror("setsockopt SO_ATTACH_FILTER"); + exit(1); + } +} + +static __maybe_unused void pair_udp_open(int fds[], uint16_t port) +{ + struct sockaddr_in saddr, daddr; + + fds[0] = socket(PF_INET, SOCK_DGRAM, 0); + fds[1] = socket(PF_INET, SOCK_DGRAM, 0); + if (fds[0] == -1 || fds[1] == -1) { + fprintf(stderr, "ERROR: socket dgram\n"); + exit(1); + } + + memset(&saddr, 0, sizeof(saddr)); + saddr.sin_family = AF_INET; + saddr.sin_port = htons(port); + saddr.sin_addr.s_addr = htonl(INADDR_LOOPBACK); + + memset(&daddr, 0, sizeof(daddr)); + daddr.sin_family = AF_INET; + daddr.sin_port = htons(port + 1); + daddr.sin_addr.s_addr = htonl(INADDR_LOOPBACK); + + /* must bind both to get consistent hash result */ + if (bind(fds[1], (void *) &daddr, sizeof(daddr))) { + perror("bind"); + exit(1); + } + if (bind(fds[0], (void *) &saddr, sizeof(saddr))) { + perror("bind"); + exit(1); + } + if (connect(fds[0], (void *) &daddr, sizeof(daddr))) { + perror("connect"); + exit(1); + } +} + +static __maybe_unused void pair_udp_send(int fds[], int num) +{ + char buf[DATA_LEN], rbuf[DATA_LEN]; + + memset(buf, DATA_CHAR, sizeof(buf)); + while (num--) { + /* Should really handle EINTR and EAGAIN */ + if (write(fds[0], buf, sizeof(buf)) != sizeof(buf)) { + fprintf(stderr, "ERROR: send failed left=%d\n", num); + exit(1); + } + if (read(fds[1], rbuf, sizeof(rbuf)) != sizeof(rbuf)) { + fprintf(stderr, "ERROR: recv failed left=%d\n", num); + exit(1); + } + if (memcmp(buf, rbuf, sizeof(buf))) { + fprintf(stderr, "ERROR: data failed left=%d\n", num); + exit(1); + } + } +} + +static __maybe_unused void pair_udp_close(int fds[]) +{ + close(fds[0]); + close(fds[1]); +} + +#endif /* PSOCK_LIB_H */ diff --git a/tools/testing/selftests/net/psock_tpacket.c b/tools/testing/selftests/net/psock_tpacket.c new file mode 100644 index 00000000000..24adf709bd9 --- /dev/null +++ b/tools/testing/selftests/net/psock_tpacket.c @@ -0,0 +1,805 @@ +/* + * Copyright 2013 Red Hat, Inc. + * Author: Daniel Borkmann <dborkman@redhat.com> + * Chetan Loke <loke.chetan@gmail.com> (TPACKET_V3 usage example) + * + * A basic test of packet socket's TPACKET_V1/TPACKET_V2/TPACKET_V3 behavior. + * + * Control: + * Test the setup of the TPACKET socket with different patterns that are + * known to fail (TODO) resp. succeed (OK). + * + * Datapath: + * Open a pair of packet sockets and send resp. receive an a priori known + * packet pattern accross the sockets and check if it was received resp. + * sent correctly. Fanout in combination with RX_RING is currently not + * tested here. + * + * The test currently runs for + * - TPACKET_V1: RX_RING, TX_RING + * - TPACKET_V2: RX_RING, TX_RING + * - TPACKET_V3: RX_RING + * + * License (GPLv2): + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <stdio.h> +#include <stdlib.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <sys/socket.h> +#include <sys/mman.h> +#include <linux/if_packet.h> +#include <linux/filter.h> +#include <ctype.h> +#include <fcntl.h> +#include <unistd.h> +#include <bits/wordsize.h> +#include <net/ethernet.h> +#include <netinet/ip.h> +#include <arpa/inet.h> +#include <stdint.h> +#include <string.h> +#include <assert.h> +#include <net/if.h> +#include <inttypes.h> +#include <poll.h> + +#include "psock_lib.h" + +#ifndef bug_on +# define bug_on(cond) assert(!(cond)) +#endif + +#ifndef __aligned_tpacket +# define __aligned_tpacket __attribute__((aligned(TPACKET_ALIGNMENT))) +#endif + +#ifndef __align_tpacket +# define __align_tpacket(x) __attribute__((aligned(TPACKET_ALIGN(x)))) +#endif + +#define NUM_PACKETS 100 +#define ALIGN_8(x) (((x) + 8 - 1) & ~(8 - 1)) + +struct ring { + struct iovec *rd; + uint8_t *mm_space; + size_t mm_len, rd_len; + struct sockaddr_ll ll; + void (*walk)(int sock, struct ring *ring); + int type, rd_num, flen, version; + union { + struct tpacket_req req; + struct tpacket_req3 req3; + }; +}; + +struct block_desc { + uint32_t version; + uint32_t offset_to_priv; + struct tpacket_hdr_v1 h1; +}; + +union frame_map { + struct { + struct tpacket_hdr tp_h __aligned_tpacket; + struct sockaddr_ll s_ll __align_tpacket(sizeof(struct tpacket_hdr)); + } *v1; + struct { + struct tpacket2_hdr tp_h __aligned_tpacket; + struct sockaddr_ll s_ll __align_tpacket(sizeof(struct tpacket2_hdr)); + } *v2; + void *raw; +}; + +static unsigned int total_packets, total_bytes; + +static int pfsocket(int ver) +{ + int ret, sock = socket(PF_PACKET, SOCK_RAW, htons(ETH_P_ALL)); + if (sock == -1) { + perror("socket"); + exit(1); + } + + ret = setsockopt(sock, SOL_PACKET, PACKET_VERSION, &ver, sizeof(ver)); + if (ret == -1) { + perror("setsockopt"); + exit(1); + } + + return sock; +} + +static void status_bar_update(void) +{ + if (total_packets % 10 == 0) { + fprintf(stderr, "."); + fflush(stderr); + } +} + +static void test_payload(void *pay, size_t len) +{ + struct ethhdr *eth = pay; + + if (len < sizeof(struct ethhdr)) { + fprintf(stderr, "test_payload: packet too " + "small: %zu bytes!\n", len); + exit(1); + } + + if (eth->h_proto != htons(ETH_P_IP)) { + fprintf(stderr, "test_payload: wrong ethernet " + "type: 0x%x!\n", ntohs(eth->h_proto)); + exit(1); + } +} + +static void create_payload(void *pay, size_t *len) +{ + int i; + struct ethhdr *eth = pay; + struct iphdr *ip = pay + sizeof(*eth); + + /* Lets create some broken crap, that still passes + * our BPF filter. + */ + + *len = DATA_LEN + 42; + + memset(pay, 0xff, ETH_ALEN * 2); + eth->h_proto = htons(ETH_P_IP); + + for (i = 0; i < sizeof(*ip); ++i) + ((uint8_t *) pay)[i + sizeof(*eth)] = (uint8_t) rand(); + + ip->ihl = 5; + ip->version = 4; + ip->protocol = 0x11; + ip->frag_off = 0; + ip->ttl = 64; + ip->tot_len = htons((uint16_t) *len - sizeof(*eth)); + + ip->saddr = htonl(INADDR_LOOPBACK); + ip->daddr = htonl(INADDR_LOOPBACK); + + memset(pay + sizeof(*eth) + sizeof(*ip), + DATA_CHAR, DATA_LEN); +} + +static inline int __v1_rx_kernel_ready(struct tpacket_hdr *hdr) +{ + return ((hdr->tp_status & TP_STATUS_USER) == TP_STATUS_USER); +} + +static inline void __v1_rx_user_ready(struct tpacket_hdr *hdr) +{ + hdr->tp_status = TP_STATUS_KERNEL; + __sync_synchronize(); +} + +static inline int __v2_rx_kernel_ready(struct tpacket2_hdr *hdr) +{ + return ((hdr->tp_status & TP_STATUS_USER) == TP_STATUS_USER); +} + +static inline void __v2_rx_user_ready(struct tpacket2_hdr *hdr) +{ + hdr->tp_status = TP_STATUS_KERNEL; + __sync_synchronize(); +} + +static inline int __v1_v2_rx_kernel_ready(void *base, int version) +{ + switch (version) { + case TPACKET_V1: + return __v1_rx_kernel_ready(base); + case TPACKET_V2: + return __v2_rx_kernel_ready(base); + default: + bug_on(1); + return 0; + } +} + +static inline void __v1_v2_rx_user_ready(void *base, int version) +{ + switch (version) { + case TPACKET_V1: + __v1_rx_user_ready(base); + break; + case TPACKET_V2: + __v2_rx_user_ready(base); + break; + } +} + +static void walk_v1_v2_rx(int sock, struct ring *ring) +{ + struct pollfd pfd; + int udp_sock[2]; + union frame_map ppd; + unsigned int frame_num = 0; + + bug_on(ring->type != PACKET_RX_RING); + + pair_udp_open(udp_sock, PORT_BASE); + pair_udp_setfilter(sock); + + memset(&pfd, 0, sizeof(pfd)); + pfd.fd = sock; + pfd.events = POLLIN | POLLERR; + pfd.revents = 0; + + pair_udp_send(udp_sock, NUM_PACKETS); + + while (total_packets < NUM_PACKETS * 2) { + while (__v1_v2_rx_kernel_ready(ring->rd[frame_num].iov_base, + ring->version)) { + ppd.raw = ring->rd[frame_num].iov_base; + + switch (ring->version) { + case TPACKET_V1: + test_payload((uint8_t *) ppd.raw + ppd.v1->tp_h.tp_mac, + ppd.v1->tp_h.tp_snaplen); + total_bytes += ppd.v1->tp_h.tp_snaplen; + break; + + case TPACKET_V2: + test_payload((uint8_t *) ppd.raw + ppd.v2->tp_h.tp_mac, + ppd.v2->tp_h.tp_snaplen); + total_bytes += ppd.v2->tp_h.tp_snaplen; + break; + } + + status_bar_update(); + total_packets++; + + __v1_v2_rx_user_ready(ppd.raw, ring->version); + + frame_num = (frame_num + 1) % ring->rd_num; + } + + poll(&pfd, 1, 1); + } + + pair_udp_close(udp_sock); + + if (total_packets != 2 * NUM_PACKETS) { + fprintf(stderr, "walk_v%d_rx: received %u out of %u pkts\n", + ring->version, total_packets, NUM_PACKETS); + exit(1); + } + + fprintf(stderr, " %u pkts (%u bytes)", NUM_PACKETS, total_bytes >> 1); +} + +static inline int __v1_tx_kernel_ready(struct tpacket_hdr *hdr) +{ + return !(hdr->tp_status & (TP_STATUS_SEND_REQUEST | TP_STATUS_SENDING)); +} + +static inline void __v1_tx_user_ready(struct tpacket_hdr *hdr) +{ + hdr->tp_status = TP_STATUS_SEND_REQUEST; + __sync_synchronize(); +} + +static inline int __v2_tx_kernel_ready(struct tpacket2_hdr *hdr) +{ + return !(hdr->tp_status & (TP_STATUS_SEND_REQUEST | TP_STATUS_SENDING)); +} + +static inline void __v2_tx_user_ready(struct tpacket2_hdr *hdr) +{ + hdr->tp_status = TP_STATUS_SEND_REQUEST; + __sync_synchronize(); +} + +static inline int __v1_v2_tx_kernel_ready(void *base, int version) +{ + switch (version) { + case TPACKET_V1: + return __v1_tx_kernel_ready(base); + case TPACKET_V2: + return __v2_tx_kernel_ready(base); + default: + bug_on(1); + return 0; + } +} + +static inline void __v1_v2_tx_user_ready(void *base, int version) +{ + switch (version) { + case TPACKET_V1: + __v1_tx_user_ready(base); + break; + case TPACKET_V2: + __v2_tx_user_ready(base); + break; + } +} + +static void __v1_v2_set_packet_loss_discard(int sock) +{ + int ret, discard = 1; + + ret = setsockopt(sock, SOL_PACKET, PACKET_LOSS, (void *) &discard, + sizeof(discard)); + if (ret == -1) { + perror("setsockopt"); + exit(1); + } +} + +static void walk_v1_v2_tx(int sock, struct ring *ring) +{ + struct pollfd pfd; + int rcv_sock, ret; + size_t packet_len; + union frame_map ppd; + char packet[1024]; + unsigned int frame_num = 0, got = 0; + struct sockaddr_ll ll = { + .sll_family = PF_PACKET, + .sll_halen = ETH_ALEN, + }; + + bug_on(ring->type != PACKET_TX_RING); + bug_on(ring->rd_num < NUM_PACKETS); + + rcv_sock = socket(PF_PACKET, SOCK_RAW, htons(ETH_P_ALL)); + if (rcv_sock == -1) { + perror("socket"); + exit(1); + } + + pair_udp_setfilter(rcv_sock); + + ll.sll_ifindex = if_nametoindex("lo"); + ret = bind(rcv_sock, (struct sockaddr *) &ll, sizeof(ll)); + if (ret == -1) { + perror("bind"); + exit(1); + } + + memset(&pfd, 0, sizeof(pfd)); + pfd.fd = sock; + pfd.events = POLLOUT | POLLERR; + pfd.revents = 0; + + total_packets = NUM_PACKETS; + create_payload(packet, &packet_len); + + while (total_packets > 0) { + while (__v1_v2_tx_kernel_ready(ring->rd[frame_num].iov_base, + ring->version) && + total_packets > 0) { + ppd.raw = ring->rd[frame_num].iov_base; + + switch (ring->version) { + case TPACKET_V1: + ppd.v1->tp_h.tp_snaplen = packet_len; + ppd.v1->tp_h.tp_len = packet_len; + + memcpy((uint8_t *) ppd.raw + TPACKET_HDRLEN - + sizeof(struct sockaddr_ll), packet, + packet_len); + total_bytes += ppd.v1->tp_h.tp_snaplen; + break; + + case TPACKET_V2: + ppd.v2->tp_h.tp_snaplen = packet_len; + ppd.v2->tp_h.tp_len = packet_len; + + memcpy((uint8_t *) ppd.raw + TPACKET2_HDRLEN - + sizeof(struct sockaddr_ll), packet, + packet_len); + total_bytes += ppd.v2->tp_h.tp_snaplen; + break; + } + + status_bar_update(); + total_packets--; + + __v1_v2_tx_user_ready(ppd.raw, ring->version); + + frame_num = (frame_num + 1) % ring->rd_num; + } + + poll(&pfd, 1, 1); + } + + bug_on(total_packets != 0); + + ret = sendto(sock, NULL, 0, 0, NULL, 0); + if (ret == -1) { + perror("sendto"); + exit(1); + } + + while ((ret = recvfrom(rcv_sock, packet, sizeof(packet), + 0, NULL, NULL)) > 0 && + total_packets < NUM_PACKETS) { + got += ret; + test_payload(packet, ret); + + status_bar_update(); + total_packets++; + } + + close(rcv_sock); + + if (total_packets != NUM_PACKETS) { + fprintf(stderr, "walk_v%d_rx: received %u out of %u pkts\n", + ring->version, total_packets, NUM_PACKETS); + exit(1); + } + + fprintf(stderr, " %u pkts (%u bytes)", NUM_PACKETS, got); +} + +static void walk_v1_v2(int sock, struct ring *ring) +{ + if (ring->type == PACKET_RX_RING) + walk_v1_v2_rx(sock, ring); + else + walk_v1_v2_tx(sock, ring); +} + +static uint64_t __v3_prev_block_seq_num = 0; + +void __v3_test_block_seq_num(struct block_desc *pbd) +{ + if (__v3_prev_block_seq_num + 1 != pbd->h1.seq_num) { + fprintf(stderr, "\nprev_block_seq_num:%"PRIu64", expected " + "seq:%"PRIu64" != actual seq:%"PRIu64"\n", + __v3_prev_block_seq_num, __v3_prev_block_seq_num + 1, + (uint64_t) pbd->h1.seq_num); + exit(1); + } + + __v3_prev_block_seq_num = pbd->h1.seq_num; +} + +static void __v3_test_block_len(struct block_desc *pbd, uint32_t bytes, int block_num) +{ + if (pbd->h1.num_pkts && bytes != pbd->h1.blk_len) { + fprintf(stderr, "\nblock:%u with %upackets, expected " + "len:%u != actual len:%u\n", block_num, + pbd->h1.num_pkts, bytes, pbd->h1.blk_len); + exit(1); + } +} + +static void __v3_test_block_header(struct block_desc *pbd, const int block_num) +{ + if ((pbd->h1.block_status & TP_STATUS_USER) == 0) { + fprintf(stderr, "\nblock %u: not in TP_STATUS_USER\n", block_num); + exit(1); + } + + __v3_test_block_seq_num(pbd); +} + +static void __v3_walk_block(struct block_desc *pbd, const int block_num) +{ + int num_pkts = pbd->h1.num_pkts, i; + unsigned long bytes = 0, bytes_with_padding = ALIGN_8(sizeof(*pbd)); + struct tpacket3_hdr *ppd; + + __v3_test_block_header(pbd, block_num); + + ppd = (struct tpacket3_hdr *) ((uint8_t *) pbd + + pbd->h1.offset_to_first_pkt); + + for (i = 0; i < num_pkts; ++i) { + bytes += ppd->tp_snaplen; + + if (ppd->tp_next_offset) + bytes_with_padding += ppd->tp_next_offset; + else + bytes_with_padding += ALIGN_8(ppd->tp_snaplen + ppd->tp_mac); + + test_payload((uint8_t *) ppd + ppd->tp_mac, ppd->tp_snaplen); + + status_bar_update(); + total_packets++; + + ppd = (struct tpacket3_hdr *) ((uint8_t *) ppd + ppd->tp_next_offset); + __sync_synchronize(); + } + + __v3_test_block_len(pbd, bytes_with_padding, block_num); + total_bytes += bytes; +} + +void __v3_flush_block(struct block_desc *pbd) +{ + pbd->h1.block_status = TP_STATUS_KERNEL; + __sync_synchronize(); +} + +static void walk_v3_rx(int sock, struct ring *ring) +{ + unsigned int block_num = 0; + struct pollfd pfd; + struct block_desc *pbd; + int udp_sock[2]; + + bug_on(ring->type != PACKET_RX_RING); + + pair_udp_open(udp_sock, PORT_BASE); + pair_udp_setfilter(sock); + + memset(&pfd, 0, sizeof(pfd)); + pfd.fd = sock; + pfd.events = POLLIN | POLLERR; + pfd.revents = 0; + + pair_udp_send(udp_sock, NUM_PACKETS); + + while (total_packets < NUM_PACKETS * 2) { + pbd = (struct block_desc *) ring->rd[block_num].iov_base; + + while ((pbd->h1.block_status & TP_STATUS_USER) == 0) + poll(&pfd, 1, 1); + + __v3_walk_block(pbd, block_num); + __v3_flush_block(pbd); + + block_num = (block_num + 1) % ring->rd_num; + } + + pair_udp_close(udp_sock); + + if (total_packets != 2 * NUM_PACKETS) { + fprintf(stderr, "walk_v3_rx: received %u out of %u pkts\n", + total_packets, NUM_PACKETS); + exit(1); + } + + fprintf(stderr, " %u pkts (%u bytes)", NUM_PACKETS, total_bytes >> 1); +} + +static void walk_v3(int sock, struct ring *ring) +{ + if (ring->type == PACKET_RX_RING) + walk_v3_rx(sock, ring); + else + bug_on(1); +} + +static void __v1_v2_fill(struct ring *ring, unsigned int blocks) +{ + ring->req.tp_block_size = getpagesize() << 2; + ring->req.tp_frame_size = TPACKET_ALIGNMENT << 7; + ring->req.tp_block_nr = blocks; + + ring->req.tp_frame_nr = ring->req.tp_block_size / + ring->req.tp_frame_size * + ring->req.tp_block_nr; + + ring->mm_len = ring->req.tp_block_size * ring->req.tp_block_nr; + ring->walk = walk_v1_v2; + ring->rd_num = ring->req.tp_frame_nr; + ring->flen = ring->req.tp_frame_size; +} + +static void __v3_fill(struct ring *ring, unsigned int blocks) +{ + ring->req3.tp_retire_blk_tov = 64; + ring->req3.tp_sizeof_priv = 0; + ring->req3.tp_feature_req_word = TP_FT_REQ_FILL_RXHASH; + + ring->req3.tp_block_size = getpagesize() << 2; + ring->req3.tp_frame_size = TPACKET_ALIGNMENT << 7; + ring->req3.tp_block_nr = blocks; + + ring->req3.tp_frame_nr = ring->req3.tp_block_size / + ring->req3.tp_frame_size * + ring->req3.tp_block_nr; + + ring->mm_len = ring->req3.tp_block_size * ring->req3.tp_block_nr; + ring->walk = walk_v3; + ring->rd_num = ring->req3.tp_block_nr; + ring->flen = ring->req3.tp_block_size; +} + +static void setup_ring(int sock, struct ring *ring, int version, int type) +{ + int ret = 0; + unsigned int blocks = 256; + + ring->type = type; + ring->version = version; + + switch (version) { + case TPACKET_V1: + case TPACKET_V2: + if (type == PACKET_TX_RING) + __v1_v2_set_packet_loss_discard(sock); + __v1_v2_fill(ring, blocks); + ret = setsockopt(sock, SOL_PACKET, type, &ring->req, + sizeof(ring->req)); + break; + + case TPACKET_V3: + __v3_fill(ring, blocks); + ret = setsockopt(sock, SOL_PACKET, type, &ring->req3, + sizeof(ring->req3)); + break; + } + + if (ret == -1) { + perror("setsockopt"); + exit(1); + } + + ring->rd_len = ring->rd_num * sizeof(*ring->rd); + ring->rd = malloc(ring->rd_len); + if (ring->rd == NULL) { + perror("malloc"); + exit(1); + } + + total_packets = 0; + total_bytes = 0; +} + +static void mmap_ring(int sock, struct ring *ring) +{ + int i; + + ring->mm_space = mmap(0, ring->mm_len, PROT_READ | PROT_WRITE, + MAP_SHARED | MAP_LOCKED | MAP_POPULATE, sock, 0); + if (ring->mm_space == MAP_FAILED) { + perror("mmap"); + exit(1); + } + + memset(ring->rd, 0, ring->rd_len); + for (i = 0; i < ring->rd_num; ++i) { + ring->rd[i].iov_base = ring->mm_space + (i * ring->flen); + ring->rd[i].iov_len = ring->flen; + } +} + +static void bind_ring(int sock, struct ring *ring) +{ + int ret; + + ring->ll.sll_family = PF_PACKET; + ring->ll.sll_protocol = htons(ETH_P_ALL); + ring->ll.sll_ifindex = if_nametoindex("lo"); + ring->ll.sll_hatype = 0; + ring->ll.sll_pkttype = 0; + ring->ll.sll_halen = 0; + + ret = bind(sock, (struct sockaddr *) &ring->ll, sizeof(ring->ll)); + if (ret == -1) { + perror("bind"); + exit(1); + } +} + +static void walk_ring(int sock, struct ring *ring) +{ + ring->walk(sock, ring); +} + +static void unmap_ring(int sock, struct ring *ring) +{ + munmap(ring->mm_space, ring->mm_len); + free(ring->rd); +} + +static int test_kernel_bit_width(void) +{ + char in[512], *ptr; + int num = 0, fd; + ssize_t ret; + + fd = open("/proc/kallsyms", O_RDONLY); + if (fd == -1) { + perror("open"); + exit(1); + } + + ret = read(fd, in, sizeof(in)); + if (ret <= 0) { + perror("read"); + exit(1); + } + + close(fd); + + ptr = in; + while(!isspace(*ptr)) { + num++; + ptr++; + } + + return num * 4; +} + +static int test_user_bit_width(void) +{ + return __WORDSIZE; +} + +static const char *tpacket_str[] = { + [TPACKET_V1] = "TPACKET_V1", + [TPACKET_V2] = "TPACKET_V2", + [TPACKET_V3] = "TPACKET_V3", +}; + +static const char *type_str[] = { + [PACKET_RX_RING] = "PACKET_RX_RING", + [PACKET_TX_RING] = "PACKET_TX_RING", +}; + +static int test_tpacket(int version, int type) +{ + int sock; + struct ring ring; + + fprintf(stderr, "test: %s with %s ", tpacket_str[version], + type_str[type]); + fflush(stderr); + + if (version == TPACKET_V1 && + test_kernel_bit_width() != test_user_bit_width()) { + fprintf(stderr, "test: skip %s %s since user and kernel " + "space have different bit width\n", + tpacket_str[version], type_str[type]); + return 0; + } + + sock = pfsocket(version); + memset(&ring, 0, sizeof(ring)); + setup_ring(sock, &ring, version, type); + mmap_ring(sock, &ring); + bind_ring(sock, &ring); + walk_ring(sock, &ring); + unmap_ring(sock, &ring); + close(sock); + + fprintf(stderr, "\n"); + return 0; +} + +int main(void) +{ + int ret = 0; + + ret |= test_tpacket(TPACKET_V1, PACKET_RX_RING); + ret |= test_tpacket(TPACKET_V1, PACKET_TX_RING); + + ret |= test_tpacket(TPACKET_V2, PACKET_RX_RING); + ret |= test_tpacket(TPACKET_V2, PACKET_TX_RING); + + ret |= test_tpacket(TPACKET_V3, PACKET_RX_RING); + + if (ret) + return 1; + + printf("OK. All tests passed\n"); + return 0; +} diff --git a/tools/testing/selftests/net/run_afpackettests b/tools/testing/selftests/net/run_afpackettests new file mode 100644 index 00000000000..5246e782d6e --- /dev/null +++ b/tools/testing/selftests/net/run_afpackettests @@ -0,0 +1,26 @@ +#!/bin/sh + +if [ $(id -u) != 0 ]; then + echo $msg must be run as root >&2 + exit 0 +fi + +echo "--------------------" +echo "running psock_fanout test" +echo "--------------------" +./psock_fanout +if [ $? -ne 0 ]; then + echo "[FAIL]" +else + echo "[PASS]" +fi + +echo "--------------------" +echo "running psock_tpacket test" +echo "--------------------" +./psock_tpacket +if [ $? -ne 0 ]; then + echo "[FAIL]" +else + echo "[PASS]" +fi diff --git a/tools/testing/selftests/net/run_netsocktests b/tools/testing/selftests/net/run_netsocktests new file mode 100644 index 00000000000..c09a682df56 --- /dev/null +++ b/tools/testing/selftests/net/run_netsocktests @@ -0,0 +1,12 @@ +#!/bin/bash + +echo "--------------------" +echo "running socket test" +echo "--------------------" +./socket +if [ $? -ne 0 ]; then + echo "[FAIL]" +else + echo "[PASS]" +fi + diff --git a/tools/testing/selftests/net/socket.c b/tools/testing/selftests/net/socket.c new file mode 100644 index 00000000000..0f227f2f9be --- /dev/null +++ b/tools/testing/selftests/net/socket.c @@ -0,0 +1,92 @@ +#include <stdio.h> +#include <errno.h> +#include <unistd.h> +#include <string.h> +#include <sys/types.h> +#include <sys/socket.h> +#include <netinet/in.h> + +struct socket_testcase { + int domain; + int type; + int protocol; + + /* 0 = valid file descriptor + * -foo = error foo + */ + int expect; + + /* If non-zero, accept EAFNOSUPPORT to handle the case + * of the protocol not being configured into the kernel. + */ + int nosupport_ok; +}; + +static struct socket_testcase tests[] = { + { AF_MAX, 0, 0, -EAFNOSUPPORT, 0 }, + { AF_INET, SOCK_STREAM, IPPROTO_TCP, 0, 1 }, + { AF_INET, SOCK_DGRAM, IPPROTO_TCP, -EPROTONOSUPPORT, 1 }, + { AF_INET, SOCK_DGRAM, IPPROTO_UDP, 0, 1 }, + { AF_INET, SOCK_STREAM, IPPROTO_UDP, -EPROTONOSUPPORT, 1 }, +}; + +#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0])) +#define ERR_STRING_SZ 64 + +static int run_tests(void) +{ + char err_string1[ERR_STRING_SZ]; + char err_string2[ERR_STRING_SZ]; + int i, err; + + err = 0; + for (i = 0; i < ARRAY_SIZE(tests); i++) { + struct socket_testcase *s = &tests[i]; + int fd; + + fd = socket(s->domain, s->type, s->protocol); + if (fd < 0) { + if (s->nosupport_ok && + errno == EAFNOSUPPORT) + continue; + + if (s->expect < 0 && + errno == -s->expect) + continue; + + strerror_r(-s->expect, err_string1, ERR_STRING_SZ); + strerror_r(errno, err_string2, ERR_STRING_SZ); + + fprintf(stderr, "socket(%d, %d, %d) expected " + "err (%s) got (%s)\n", + s->domain, s->type, s->protocol, + err_string1, err_string2); + + err = -1; + break; + } else { + close(fd); + + if (s->expect < 0) { + strerror_r(errno, err_string1, ERR_STRING_SZ); + + fprintf(stderr, "socket(%d, %d, %d) expected " + "success got err (%s)\n", + s->domain, s->type, s->protocol, + err_string1); + + err = -1; + break; + } + } + } + + return err; +} + +int main(void) +{ + int err = run_tests(); + + return err; +} diff --git a/tools/testing/selftests/powerpc/Makefile b/tools/testing/selftests/powerpc/Makefile new file mode 100644 index 00000000000..54833a791a4 --- /dev/null +++ b/tools/testing/selftests/powerpc/Makefile @@ -0,0 +1,39 @@ +# Makefile for powerpc selftests + +# ARCH can be overridden by the user for cross compiling +ARCH ?= $(shell uname -m) +ARCH := $(shell echo $(ARCH) | sed -e s/ppc.*/powerpc/) + +ifeq ($(ARCH),powerpc) + +GIT_VERSION = $(shell git describe --always --long --dirty || echo "unknown") + +CC := $(CROSS_COMPILE)$(CC) +CFLAGS := -Wall -O2 -flto -Wall -Werror -DGIT_VERSION='"$(GIT_VERSION)"' -I$(CURDIR) $(CFLAGS) + +export CC CFLAGS + +TARGETS = pmu copyloops mm tm + +endif + +all: + @for TARGET in $(TARGETS); do \ + $(MAKE) -C $$TARGET all; \ + done; + +run_tests: all + @for TARGET in $(TARGETS); do \ + $(MAKE) -C $$TARGET run_tests; \ + done; + +clean: + @for TARGET in $(TARGETS); do \ + $(MAKE) -C $$TARGET clean; \ + done; + rm -f tags + +tags: + find . -name '*.c' -o -name '*.h' | xargs ctags + +.PHONY: all run_tests clean tags diff --git a/tools/testing/selftests/powerpc/copyloops/Makefile b/tools/testing/selftests/powerpc/copyloops/Makefile new file mode 100644 index 00000000000..6f2d3be227f --- /dev/null +++ b/tools/testing/selftests/powerpc/copyloops/Makefile @@ -0,0 +1,29 @@ +# The loops are all 64-bit code +CFLAGS += -m64 +CFLAGS += -I$(CURDIR) +CFLAGS += -D SELFTEST + +# Use our CFLAGS for the implicit .S rule +ASFLAGS = $(CFLAGS) + +PROGS := copyuser_64 copyuser_power7 memcpy_64 memcpy_power7 +EXTRA_SOURCES := validate.c ../harness.c + +all: $(PROGS) + +copyuser_64: CPPFLAGS += -D COPY_LOOP=test___copy_tofrom_user_base +copyuser_power7: CPPFLAGS += -D COPY_LOOP=test___copy_tofrom_user_power7 +memcpy_64: CPPFLAGS += -D COPY_LOOP=test_memcpy +memcpy_power7: CPPFLAGS += -D COPY_LOOP=test_memcpy_power7 + +$(PROGS): $(EXTRA_SOURCES) + +run_tests: all + @-for PROG in $(PROGS); do \ + ./$$PROG; \ + done; + +clean: + rm -f $(PROGS) *.o + +.PHONY: all run_tests clean diff --git a/tools/testing/selftests/powerpc/copyloops/asm/ppc_asm.h b/tools/testing/selftests/powerpc/copyloops/asm/ppc_asm.h new file mode 100644 index 00000000000..d1dc3742551 --- /dev/null +++ b/tools/testing/selftests/powerpc/copyloops/asm/ppc_asm.h @@ -0,0 +1,89 @@ +#include <ppc-asm.h> + +#define CONFIG_ALTIVEC + +#define r1 1 + +#define vr0 0 +#define vr1 1 +#define vr2 2 +#define vr3 3 +#define vr4 4 +#define vr5 5 +#define vr6 6 +#define vr7 7 +#define vr8 8 +#define vr9 9 +#define vr10 10 +#define vr11 11 +#define vr12 12 +#define vr13 13 +#define vr14 14 +#define vr15 15 +#define vr16 16 +#define vr17 17 +#define vr18 18 +#define vr19 19 +#define vr20 20 +#define vr21 21 +#define vr22 22 +#define vr23 23 +#define vr24 24 +#define vr25 25 +#define vr26 26 +#define vr27 27 +#define vr28 28 +#define vr29 29 +#define vr30 30 +#define vr31 31 + +#define R14 r14 +#define R15 r15 +#define R16 r16 +#define R17 r17 +#define R18 r18 +#define R19 r19 +#define R20 r20 +#define R21 r21 +#define R22 r22 +#define R29 r29 +#define R30 r30 +#define R31 r31 + +#define STACKFRAMESIZE 256 +#define STK_REG(i) (112 + ((i)-14)*8) + +#define _GLOBAL(A) FUNC_START(test_ ## A) +#define _GLOBAL_TOC(A) _GLOBAL(A) + +#define PPC_MTOCRF(A, B) mtocrf A, B + +FUNC_START(enter_vmx_usercopy) + li r3,1 + blr + +FUNC_START(exit_vmx_usercopy) + li r3,0 + blr + +FUNC_START(enter_vmx_copy) + li r3,1 + blr + +FUNC_START(exit_vmx_copy) + blr + +FUNC_START(memcpy_power7) + blr + +FUNC_START(__copy_tofrom_user_power7) + blr + +FUNC_START(__copy_tofrom_user_base) + blr + +#define BEGIN_FTR_SECTION +#define FTR_SECTION_ELSE +#define ALT_FTR_SECTION_END_IFCLR(x) +#define ALT_FTR_SECTION_END(x, y) +#define END_FTR_SECTION_IFCLR(x) diff --git a/tools/testing/selftests/powerpc/copyloops/asm/processor.h b/tools/testing/selftests/powerpc/copyloops/asm/processor.h new file mode 100644 index 00000000000..e69de29bb2d --- /dev/null +++ b/tools/testing/selftests/powerpc/copyloops/asm/processor.h diff --git a/tools/testing/selftests/powerpc/copyloops/copyuser_64.S b/tools/testing/selftests/powerpc/copyloops/copyuser_64.S new file mode 120000 index 00000000000..f1c418a2521 --- /dev/null +++ b/tools/testing/selftests/powerpc/copyloops/copyuser_64.S @@ -0,0 +1 @@ +../../../../../arch/powerpc/lib/copyuser_64.S
\ No newline at end of file diff --git a/tools/testing/selftests/powerpc/copyloops/copyuser_power7.S b/tools/testing/selftests/powerpc/copyloops/copyuser_power7.S new file mode 120000 index 00000000000..47868959829 --- /dev/null +++ b/tools/testing/selftests/powerpc/copyloops/copyuser_power7.S @@ -0,0 +1 @@ +../../../../../arch/powerpc/lib/copyuser_power7.S
\ No newline at end of file diff --git a/tools/testing/selftests/powerpc/copyloops/memcpy_64.S b/tools/testing/selftests/powerpc/copyloops/memcpy_64.S new file mode 120000 index 00000000000..cce33fb6f9d --- /dev/null +++ b/tools/testing/selftests/powerpc/copyloops/memcpy_64.S @@ -0,0 +1 @@ +../../../../../arch/powerpc/lib/memcpy_64.S
\ No newline at end of file diff --git a/tools/testing/selftests/powerpc/copyloops/memcpy_power7.S b/tools/testing/selftests/powerpc/copyloops/memcpy_power7.S new file mode 120000 index 00000000000..0d6fbfaf3d5 --- /dev/null +++ b/tools/testing/selftests/powerpc/copyloops/memcpy_power7.S @@ -0,0 +1 @@ +../../../../../arch/powerpc/lib/memcpy_power7.S
\ No newline at end of file diff --git a/tools/testing/selftests/powerpc/copyloops/validate.c b/tools/testing/selftests/powerpc/copyloops/validate.c new file mode 100644 index 00000000000..1750ff57ee5 --- /dev/null +++ b/tools/testing/selftests/powerpc/copyloops/validate.c @@ -0,0 +1,99 @@ +#include <malloc.h> +#include <string.h> +#include <stdlib.h> +#include <stdbool.h> + +#include "../utils.h" + +#define MAX_LEN 8192 +#define MAX_OFFSET 16 +#define MIN_REDZONE 128 +#define BUFLEN (MAX_LEN+MAX_OFFSET+2*MIN_REDZONE) +#define POISON 0xa5 + +unsigned long COPY_LOOP(void *to, const void *from, unsigned long size); + +static void do_one(char *src, char *dst, unsigned long src_off, + unsigned long dst_off, unsigned long len, void *redzone, + void *fill) +{ + char *srcp, *dstp; + unsigned long ret; + unsigned long i; + + srcp = src + MIN_REDZONE + src_off; + dstp = dst + MIN_REDZONE + dst_off; + + memset(src, POISON, BUFLEN); + memset(dst, POISON, BUFLEN); + memcpy(srcp, fill, len); + + ret = COPY_LOOP(dstp, srcp, len); + if (ret && ret != (unsigned long)dstp) { + printf("(%p,%p,%ld) returned %ld\n", dstp, srcp, len, ret); + abort(); + } + + if (memcmp(dstp, srcp, len)) { + printf("(%p,%p,%ld) miscompare\n", dstp, srcp, len); + printf("src: "); + for (i = 0; i < len; i++) + printf("%02x ", srcp[i]); + printf("\ndst: "); + for (i = 0; i < len; i++) + printf("%02x ", dstp[i]); + printf("\n"); + abort(); + } + + if (memcmp(dst, redzone, dstp - dst)) { + printf("(%p,%p,%ld) redzone before corrupted\n", + dstp, srcp, len); + abort(); + } + + if (memcmp(dstp+len, redzone, dst+BUFLEN-(dstp+len))) { + printf("(%p,%p,%ld) redzone after corrupted\n", + dstp, srcp, len); + abort(); + } +} + +int test_copy_loop(void) +{ + char *src, *dst, *redzone, *fill; + unsigned long len, src_off, dst_off; + unsigned long i; + + src = memalign(BUFLEN, BUFLEN); + dst = memalign(BUFLEN, BUFLEN); + redzone = malloc(BUFLEN); + fill = malloc(BUFLEN); + + if (!src || !dst || !redzone || !fill) { + fprintf(stderr, "malloc failed\n"); + exit(1); + } + + memset(redzone, POISON, BUFLEN); + + /* Fill with sequential bytes */ + for (i = 0; i < BUFLEN; i++) + fill[i] = i & 0xff; + + for (len = 1; len < MAX_LEN; len++) { + for (src_off = 0; src_off < MAX_OFFSET; src_off++) { + for (dst_off = 0; dst_off < MAX_OFFSET; dst_off++) { + do_one(src, dst, src_off, dst_off, len, + redzone, fill); + } + } + } + + return 0; +} + +int main(void) +{ + return test_harness(test_copy_loop, str(COPY_LOOP)); +} diff --git a/tools/testing/selftests/powerpc/harness.c b/tools/testing/selftests/powerpc/harness.c new file mode 100644 index 00000000000..8ebc58a0931 --- /dev/null +++ b/tools/testing/selftests/powerpc/harness.c @@ -0,0 +1,114 @@ +/* + * Copyright 2013, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#include <errno.h> +#include <signal.h> +#include <stdbool.h> +#include <stdio.h> +#include <stdlib.h> +#include <sys/types.h> +#include <sys/wait.h> +#include <unistd.h> + +#include "subunit.h" +#include "utils.h" + +#define TIMEOUT 120 +#define KILL_TIMEOUT 5 + + +int run_test(int (test_function)(void), char *name) +{ + bool terminated; + int rc, status; + pid_t pid; + + /* Make sure output is flushed before forking */ + fflush(stdout); + + pid = fork(); + if (pid == 0) { + setpgid(0, 0); + exit(test_function()); + } else if (pid == -1) { + perror("fork"); + return 1; + } + + setpgid(pid, pid); + + /* Wake us up in timeout seconds */ + alarm(TIMEOUT); + terminated = false; + +wait: + rc = waitpid(pid, &status, 0); + if (rc == -1) { + if (errno != EINTR) { + printf("unknown error from waitpid\n"); + return 1; + } + + if (terminated) { + printf("!! force killing %s\n", name); + kill(-pid, SIGKILL); + return 1; + } else { + printf("!! killing %s\n", name); + kill(-pid, SIGTERM); + terminated = true; + alarm(KILL_TIMEOUT); + goto wait; + } + } + + /* Kill anything else in the process group that is still running */ + kill(-pid, SIGTERM); + + if (WIFEXITED(status)) + status = WEXITSTATUS(status); + else { + if (WIFSIGNALED(status)) + printf("!! child died by signal %d\n", WTERMSIG(status)); + else + printf("!! child died by unknown cause\n"); + + status = 1; /* Signal or other */ + } + + return status; +} + +static void alarm_handler(int signum) +{ + /* Jut wake us up from waitpid */ +} + +static struct sigaction alarm_action = { + .sa_handler = alarm_handler, +}; + +int test_harness(int (test_function)(void), char *name) +{ + int rc; + + test_start(name); + test_set_git_version(GIT_VERSION); + + if (sigaction(SIGALRM, &alarm_action, NULL)) { + perror("sigaction"); + test_error(name); + return 1; + } + + rc = run_test(test_function, name); + + if (rc == MAGIC_SKIP_RETURN_VALUE) + test_skip(name); + else + test_finish(name, rc); + + return rc; +} diff --git a/tools/testing/selftests/powerpc/mm/Makefile b/tools/testing/selftests/powerpc/mm/Makefile new file mode 100644 index 00000000000..357ccbd6bad --- /dev/null +++ b/tools/testing/selftests/powerpc/mm/Makefile @@ -0,0 +1,18 @@ +noarg: + $(MAKE) -C ../ + +PROGS := hugetlb_vs_thp_test + +all: $(PROGS) + +$(PROGS): ../harness.c + +run_tests: all + @-for PROG in $(PROGS); do \ + ./$$PROG; \ + done; + +clean: + rm -f $(PROGS) + +.PHONY: all run_tests clean diff --git a/tools/testing/selftests/powerpc/mm/hugetlb_vs_thp_test.c b/tools/testing/selftests/powerpc/mm/hugetlb_vs_thp_test.c new file mode 100644 index 00000000000..3d8e5b033e1 --- /dev/null +++ b/tools/testing/selftests/powerpc/mm/hugetlb_vs_thp_test.c @@ -0,0 +1,72 @@ +#include <stdio.h> +#include <sys/mman.h> +#include <unistd.h> + +#include "utils.h" + +/* This must match the huge page & THP size */ +#define SIZE (16 * 1024 * 1024) + +static int test_body(void) +{ + void *addr; + char *p; + + addr = (void *)0xa0000000; + + p = mmap(addr, SIZE, PROT_READ | PROT_WRITE, + MAP_HUGETLB | MAP_ANONYMOUS | MAP_PRIVATE, -1, 0); + if (p != MAP_FAILED) { + /* + * Typically the mmap will fail because no huge pages are + * allocated on the system. But if there are huge pages + * allocated the mmap will succeed. That's fine too, we just + * munmap here before continuing. + */ + munmap(addr, SIZE); + } + + p = mmap(addr, SIZE, PROT_READ | PROT_WRITE, + MAP_ANONYMOUS | MAP_PRIVATE, -1, 0); + if (p == MAP_FAILED) { + printf("Mapping failed @ %p\n", addr); + perror("mmap"); + return 1; + } + + /* + * Either a user or kernel access is sufficient to trigger the bug. + * A kernel access is easier to spot & debug, as it will trigger the + * softlockup or RCU stall detectors, and when the system is kicked + * into xmon we get a backtrace in the kernel. + * + * A good option is: + * getcwd(p, SIZE); + * + * For the purposes of this testcase it's preferable to spin in + * userspace, so the harness can kill us if we get stuck. That way we + * see a test failure rather than a dead system. + */ + *p = 0xf; + + munmap(addr, SIZE); + + return 0; +} + +static int test_main(void) +{ + int i; + + /* 10,000 because it's a "bunch", and completes reasonably quickly */ + for (i = 0; i < 10000; i++) + if (test_body()) + return 1; + + return 0; +} + +int main(void) +{ + return test_harness(test_main, "hugetlb_vs_thp"); +} diff --git a/tools/testing/selftests/powerpc/pmu/Makefile b/tools/testing/selftests/powerpc/pmu/Makefile new file mode 100644 index 00000000000..b9ff0db42c7 --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/Makefile @@ -0,0 +1,41 @@ +noarg: + $(MAKE) -C ../ + +PROGS := count_instructions +EXTRA_SOURCES := ../harness.c event.c + +all: $(PROGS) sub_all + +$(PROGS): $(EXTRA_SOURCES) + +# loop.S can only be built 64-bit +count_instructions: loop.S count_instructions.c $(EXTRA_SOURCES) + $(CC) $(CFLAGS) -m64 -o $@ $^ + +run_tests: all sub_run_tests + @-for PROG in $(PROGS); do \ + ./$$PROG; \ + done; + +clean: sub_clean + rm -f $(PROGS) loop.o + + +SUB_TARGETS = ebb + +sub_all: + @for TARGET in $(SUB_TARGETS); do \ + $(MAKE) -C $$TARGET all; \ + done; + +sub_run_tests: all + @for TARGET in $(SUB_TARGETS); do \ + $(MAKE) -C $$TARGET run_tests; \ + done; + +sub_clean: + @for TARGET in $(SUB_TARGETS); do \ + $(MAKE) -C $$TARGET clean; \ + done; + +.PHONY: all run_tests clean sub_all sub_run_tests sub_clean diff --git a/tools/testing/selftests/powerpc/pmu/count_instructions.c b/tools/testing/selftests/powerpc/pmu/count_instructions.c new file mode 100644 index 00000000000..312b4f0fd27 --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/count_instructions.c @@ -0,0 +1,135 @@ +/* + * Copyright 2013, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#define _GNU_SOURCE + +#include <stdio.h> +#include <stdbool.h> +#include <string.h> +#include <sys/prctl.h> + +#include "event.h" +#include "utils.h" + +extern void thirty_two_instruction_loop(u64 loops); + +static void setup_event(struct event *e, u64 config, char *name) +{ + event_init_opts(e, config, PERF_TYPE_HARDWARE, name); + + e->attr.disabled = 1; + e->attr.exclude_kernel = 1; + e->attr.exclude_hv = 1; + e->attr.exclude_idle = 1; +} + +static int do_count_loop(struct event *events, u64 instructions, + u64 overhead, bool report) +{ + s64 difference, expected; + double percentage; + + prctl(PR_TASK_PERF_EVENTS_ENABLE); + + /* Run for 1M instructions */ + thirty_two_instruction_loop(instructions >> 5); + + prctl(PR_TASK_PERF_EVENTS_DISABLE); + + event_read(&events[0]); + event_read(&events[1]); + + expected = instructions + overhead; + difference = events[0].result.value - expected; + percentage = (double)difference / events[0].result.value * 100; + + if (report) { + event_report(&events[0]); + event_report(&events[1]); + + printf("Looped for %llu instructions, overhead %llu\n", instructions, overhead); + printf("Expected %llu\n", expected); + printf("Actual %llu\n", events[0].result.value); + printf("Delta %lld, %f%%\n", difference, percentage); + } + + event_reset(&events[0]); + event_reset(&events[1]); + + if (difference < 0) + difference = -difference; + + /* Tolerate a difference below 0.0001 % */ + difference *= 10000 * 100; + if (difference / events[0].result.value) + return -1; + + return 0; +} + +/* Count how many instructions it takes to do a null loop */ +static u64 determine_overhead(struct event *events) +{ + u64 current, overhead; + int i; + + do_count_loop(events, 0, 0, false); + overhead = events[0].result.value; + + for (i = 0; i < 100; i++) { + do_count_loop(events, 0, 0, false); + current = events[0].result.value; + if (current < overhead) { + printf("Replacing overhead %llu with %llu\n", overhead, current); + overhead = current; + } + } + + return overhead; +} + +static int count_instructions(void) +{ + struct event events[2]; + u64 overhead; + + setup_event(&events[0], PERF_COUNT_HW_INSTRUCTIONS, "instructions"); + setup_event(&events[1], PERF_COUNT_HW_CPU_CYCLES, "cycles"); + + if (event_open(&events[0])) { + perror("perf_event_open"); + return -1; + } + + if (event_open_with_group(&events[1], events[0].fd)) { + perror("perf_event_open"); + return -1; + } + + overhead = determine_overhead(events); + printf("Overhead of null loop: %llu instructions\n", overhead); + + /* Run for 1M instructions */ + FAIL_IF(do_count_loop(events, 0x100000, overhead, true)); + + /* Run for 10M instructions */ + FAIL_IF(do_count_loop(events, 0xa00000, overhead, true)); + + /* Run for 100M instructions */ + FAIL_IF(do_count_loop(events, 0x6400000, overhead, true)); + + /* Run for 1G instructions */ + FAIL_IF(do_count_loop(events, 0x40000000, overhead, true)); + + event_close(&events[0]); + event_close(&events[1]); + + return 0; +} + +int main(void) +{ + return test_harness(count_instructions, "count_instructions"); +} diff --git a/tools/testing/selftests/powerpc/pmu/ebb/Makefile b/tools/testing/selftests/powerpc/pmu/ebb/Makefile new file mode 100644 index 00000000000..edbba2affc2 --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/ebb/Makefile @@ -0,0 +1,32 @@ +noarg: + $(MAKE) -C ../../ + +# The EBB handler is 64-bit code and everything links against it +CFLAGS += -m64 + +PROGS := reg_access_test event_attributes_test cycles_test \ + cycles_with_freeze_test pmc56_overflow_test \ + ebb_vs_cpu_event_test cpu_event_vs_ebb_test \ + cpu_event_pinned_vs_ebb_test task_event_vs_ebb_test \ + task_event_pinned_vs_ebb_test multi_ebb_procs_test \ + multi_counter_test pmae_handling_test \ + close_clears_pmcc_test instruction_count_test \ + fork_cleanup_test ebb_on_child_test \ + ebb_on_willing_child_test back_to_back_ebbs_test \ + lost_exception_test no_handler_test + +all: $(PROGS) + +$(PROGS): ../../harness.c ../event.c ../lib.c ebb.c ebb_handler.S trace.c + +instruction_count_test: ../loop.S + +lost_exception_test: ../lib.c + +run_tests: all + @-for PROG in $(PROGS); do \ + ./$$PROG; \ + done; + +clean: + rm -f $(PROGS) diff --git a/tools/testing/selftests/powerpc/pmu/ebb/back_to_back_ebbs_test.c b/tools/testing/selftests/powerpc/pmu/ebb/back_to_back_ebbs_test.c new file mode 100644 index 00000000000..66ea765c0e7 --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/ebb/back_to_back_ebbs_test.c @@ -0,0 +1,106 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#include <stdbool.h> +#include <stdio.h> +#include <stdlib.h> + +#include "ebb.h" + + +#define NUMBER_OF_EBBS 50 + +/* + * Test that if we overflow the counter while in the EBB handler, we take + * another EBB on exiting from the handler. + * + * We do this by counting with a stupidly low sample period, causing us to + * overflow the PMU while we're still in the EBB handler, leading to another + * EBB. + * + * We get out of what would otherwise be an infinite loop by leaving the + * counter frozen once we've taken enough EBBs. + */ + +static void ebb_callee(void) +{ + uint64_t siar, val; + + val = mfspr(SPRN_BESCR); + if (!(val & BESCR_PMEO)) { + ebb_state.stats.spurious++; + goto out; + } + + ebb_state.stats.ebb_count++; + trace_log_counter(ebb_state.trace, ebb_state.stats.ebb_count); + + /* Resets the PMC */ + count_pmc(1, sample_period); + +out: + if (ebb_state.stats.ebb_count == NUMBER_OF_EBBS) + /* Reset but leave counters frozen */ + reset_ebb_with_clear_mask(MMCR0_PMAO); + else + /* Unfreezes */ + reset_ebb(); + + /* Do some stuff to chew some cycles and pop the counter */ + siar = mfspr(SPRN_SIAR); + trace_log_reg(ebb_state.trace, SPRN_SIAR, siar); + + val = mfspr(SPRN_PMC1); + trace_log_reg(ebb_state.trace, SPRN_PMC1, val); + + val = mfspr(SPRN_MMCR0); + trace_log_reg(ebb_state.trace, SPRN_MMCR0, val); +} + +int back_to_back_ebbs(void) +{ + struct event event; + + event_init_named(&event, 0x1001e, "cycles"); + event_leader_ebb_init(&event); + + event.attr.exclude_kernel = 1; + event.attr.exclude_hv = 1; + event.attr.exclude_idle = 1; + + FAIL_IF(event_open(&event)); + + setup_ebb_handler(ebb_callee); + + FAIL_IF(ebb_event_enable(&event)); + + sample_period = 5; + + ebb_freeze_pmcs(); + mtspr(SPRN_PMC1, pmc_sample_period(sample_period)); + ebb_global_enable(); + ebb_unfreeze_pmcs(); + + while (ebb_state.stats.ebb_count < NUMBER_OF_EBBS) + FAIL_IF(core_busy_loop()); + + ebb_global_disable(); + ebb_freeze_pmcs(); + + count_pmc(1, sample_period); + + dump_ebb_state(); + + event_close(&event); + + FAIL_IF(ebb_state.stats.ebb_count != NUMBER_OF_EBBS); + + return 0; +} + +int main(void) +{ + return test_harness(back_to_back_ebbs, "back_to_back_ebbs"); +} diff --git a/tools/testing/selftests/powerpc/pmu/ebb/close_clears_pmcc_test.c b/tools/testing/selftests/powerpc/pmu/ebb/close_clears_pmcc_test.c new file mode 100644 index 00000000000..0f0423dba18 --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/ebb/close_clears_pmcc_test.c @@ -0,0 +1,59 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#include <stdio.h> +#include <stdlib.h> +#include <setjmp.h> +#include <signal.h> + +#include "ebb.h" + + +/* + * Test that closing the EBB event clears MMCR0_PMCC, preventing further access + * by userspace to the PMU hardware. + */ + +int close_clears_pmcc(void) +{ + struct event event; + + event_init_named(&event, 0x1001e, "cycles"); + event_leader_ebb_init(&event); + + FAIL_IF(event_open(&event)); + + ebb_enable_pmc_counting(1); + setup_ebb_handler(standard_ebb_callee); + ebb_global_enable(); + FAIL_IF(ebb_event_enable(&event)); + + mtspr(SPRN_PMC1, pmc_sample_period(sample_period)); + + while (ebb_state.stats.ebb_count < 1) + FAIL_IF(core_busy_loop()); + + ebb_global_disable(); + event_close(&event); + + FAIL_IF(ebb_state.stats.ebb_count == 0); + + /* The real test is here, do we take a SIGILL when writing PMU regs now + * that we have closed the event. We expect that we will. */ + + FAIL_IF(catch_sigill(write_pmc1)); + + /* We should still be able to read EBB regs though */ + mfspr(SPRN_EBBHR); + mfspr(SPRN_EBBRR); + mfspr(SPRN_BESCR); + + return 0; +} + +int main(void) +{ + return test_harness(close_clears_pmcc, "close_clears_pmcc"); +} diff --git a/tools/testing/selftests/powerpc/pmu/ebb/cpu_event_pinned_vs_ebb_test.c b/tools/testing/selftests/powerpc/pmu/ebb/cpu_event_pinned_vs_ebb_test.c new file mode 100644 index 00000000000..d3ed64d5d6c --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/ebb/cpu_event_pinned_vs_ebb_test.c @@ -0,0 +1,93 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#include <signal.h> +#include <stdio.h> +#include <stdlib.h> +#include <stdbool.h> +#include <sys/types.h> +#include <sys/wait.h> +#include <unistd.h> + +#include "ebb.h" + + +/* + * Tests a pinned cpu event vs an EBB - in that order. The pinned cpu event + * should remain and the EBB event should fail to enable. + */ + +static int setup_cpu_event(struct event *event, int cpu) +{ + event_init_named(event, 0x400FA, "PM_RUN_INST_CMPL"); + + event->attr.pinned = 1; + + event->attr.exclude_kernel = 1; + event->attr.exclude_hv = 1; + event->attr.exclude_idle = 1; + + SKIP_IF(require_paranoia_below(1)); + FAIL_IF(event_open_with_cpu(event, cpu)); + FAIL_IF(event_enable(event)); + + return 0; +} + +int cpu_event_pinned_vs_ebb(void) +{ + union pipe read_pipe, write_pipe; + struct event event; + int cpu, rc; + pid_t pid; + + cpu = pick_online_cpu(); + FAIL_IF(cpu < 0); + FAIL_IF(bind_to_cpu(cpu)); + + FAIL_IF(pipe(read_pipe.fds) == -1); + FAIL_IF(pipe(write_pipe.fds) == -1); + + pid = fork(); + if (pid == 0) { + /* NB order of pipes looks reversed */ + exit(ebb_child(write_pipe, read_pipe)); + } + + /* We setup the cpu event first */ + rc = setup_cpu_event(&event, cpu); + if (rc) { + kill_child_and_wait(pid); + return rc; + } + + /* Signal the child to install its EBB event and wait */ + if (sync_with_child(read_pipe, write_pipe)) + /* If it fails, wait for it to exit */ + goto wait; + + /* Signal the child to run */ + FAIL_IF(sync_with_child(read_pipe, write_pipe)); + +wait: + /* We expect it to fail to read the event */ + FAIL_IF(wait_for_child(pid) != 2); + + FAIL_IF(event_disable(&event)); + FAIL_IF(event_read(&event)); + + event_report(&event); + + /* The cpu event should have run */ + FAIL_IF(event.result.value == 0); + FAIL_IF(event.result.enabled != event.result.running); + + return 0; +} + +int main(void) +{ + return test_harness(cpu_event_pinned_vs_ebb, "cpu_event_pinned_vs_ebb"); +} diff --git a/tools/testing/selftests/powerpc/pmu/ebb/cpu_event_vs_ebb_test.c b/tools/testing/selftests/powerpc/pmu/ebb/cpu_event_vs_ebb_test.c new file mode 100644 index 00000000000..8b972c2aa39 --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/ebb/cpu_event_vs_ebb_test.c @@ -0,0 +1,89 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#include <signal.h> +#include <stdio.h> +#include <stdlib.h> +#include <stdbool.h> +#include <sys/types.h> +#include <sys/wait.h> +#include <unistd.h> + +#include "ebb.h" + + +/* + * Tests a cpu event vs an EBB - in that order. The EBB should force the cpu + * event off the PMU. + */ + +static int setup_cpu_event(struct event *event, int cpu) +{ + event_init_named(event, 0x400FA, "PM_RUN_INST_CMPL"); + + event->attr.exclude_kernel = 1; + event->attr.exclude_hv = 1; + event->attr.exclude_idle = 1; + + SKIP_IF(require_paranoia_below(1)); + FAIL_IF(event_open_with_cpu(event, cpu)); + FAIL_IF(event_enable(event)); + + return 0; +} + +int cpu_event_vs_ebb(void) +{ + union pipe read_pipe, write_pipe; + struct event event; + int cpu, rc; + pid_t pid; + + cpu = pick_online_cpu(); + FAIL_IF(cpu < 0); + FAIL_IF(bind_to_cpu(cpu)); + + FAIL_IF(pipe(read_pipe.fds) == -1); + FAIL_IF(pipe(write_pipe.fds) == -1); + + pid = fork(); + if (pid == 0) { + /* NB order of pipes looks reversed */ + exit(ebb_child(write_pipe, read_pipe)); + } + + /* We setup the cpu event first */ + rc = setup_cpu_event(&event, cpu); + if (rc) { + kill_child_and_wait(pid); + return rc; + } + + /* Signal the child to install its EBB event and wait */ + if (sync_with_child(read_pipe, write_pipe)) + /* If it fails, wait for it to exit */ + goto wait; + + /* Signal the child to run */ + FAIL_IF(sync_with_child(read_pipe, write_pipe)); + +wait: + /* We expect the child to succeed */ + FAIL_IF(wait_for_child(pid)); + + FAIL_IF(event_disable(&event)); + FAIL_IF(event_read(&event)); + + event_report(&event); + + /* The cpu event may have run */ + + return 0; +} + +int main(void) +{ + return test_harness(cpu_event_vs_ebb, "cpu_event_vs_ebb"); +} diff --git a/tools/testing/selftests/powerpc/pmu/ebb/cycles_test.c b/tools/testing/selftests/powerpc/pmu/ebb/cycles_test.c new file mode 100644 index 00000000000..8590fc1bfc0 --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/ebb/cycles_test.c @@ -0,0 +1,58 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#include <stdio.h> +#include <stdlib.h> + +#include "ebb.h" + + +/* + * Basic test that counts user cycles and takes EBBs. + */ +int cycles(void) +{ + struct event event; + + event_init_named(&event, 0x1001e, "cycles"); + event_leader_ebb_init(&event); + + event.attr.exclude_kernel = 1; + event.attr.exclude_hv = 1; + event.attr.exclude_idle = 1; + + FAIL_IF(event_open(&event)); + + ebb_enable_pmc_counting(1); + setup_ebb_handler(standard_ebb_callee); + ebb_global_enable(); + FAIL_IF(ebb_event_enable(&event)); + + mtspr(SPRN_PMC1, pmc_sample_period(sample_period)); + + while (ebb_state.stats.ebb_count < 10) { + FAIL_IF(core_busy_loop()); + FAIL_IF(ebb_check_mmcr0()); + } + + ebb_global_disable(); + ebb_freeze_pmcs(); + + count_pmc(1, sample_period); + + dump_ebb_state(); + + event_close(&event); + + FAIL_IF(ebb_state.stats.ebb_count == 0); + FAIL_IF(!ebb_check_count(1, sample_period, 100)); + + return 0; +} + +int main(void) +{ + return test_harness(cycles, "cycles"); +} diff --git a/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_freeze_test.c b/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_freeze_test.c new file mode 100644 index 00000000000..754b3f2008d --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_freeze_test.c @@ -0,0 +1,117 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#include <stdio.h> +#include <stdlib.h> +#include <stdbool.h> + +#include "ebb.h" + + +/* + * Test of counting cycles while using MMCR0_FC (freeze counters) to only count + * parts of the code. This is complicated by the fact that FC is set by the + * hardware when the event overflows. We may take the EBB after we have set FC, + * so we have to be careful about whether we clear FC at the end of the EBB + * handler or not. + */ + +static bool counters_frozen = false; +static int ebbs_while_frozen = 0; + +static void ebb_callee(void) +{ + uint64_t mask, val; + + mask = MMCR0_PMAO | MMCR0_FC; + + val = mfspr(SPRN_BESCR); + if (!(val & BESCR_PMEO)) { + ebb_state.stats.spurious++; + goto out; + } + + ebb_state.stats.ebb_count++; + trace_log_counter(ebb_state.trace, ebb_state.stats.ebb_count); + + val = mfspr(SPRN_MMCR0); + trace_log_reg(ebb_state.trace, SPRN_MMCR0, val); + + if (counters_frozen) { + trace_log_string(ebb_state.trace, "frozen"); + ebbs_while_frozen++; + mask &= ~MMCR0_FC; + } + + count_pmc(1, sample_period); +out: + reset_ebb_with_clear_mask(mask); +} + +int cycles_with_freeze(void) +{ + struct event event; + uint64_t val; + bool fc_cleared; + + event_init_named(&event, 0x1001e, "cycles"); + event_leader_ebb_init(&event); + + event.attr.exclude_kernel = 1; + event.attr.exclude_hv = 1; + event.attr.exclude_idle = 1; + + FAIL_IF(event_open(&event)); + + setup_ebb_handler(ebb_callee); + ebb_global_enable(); + FAIL_IF(ebb_event_enable(&event)); + + mtspr(SPRN_PMC1, pmc_sample_period(sample_period)); + + fc_cleared = false; + + /* Make sure we loop until we take at least one EBB */ + while ((ebb_state.stats.ebb_count < 20 && !fc_cleared) || + ebb_state.stats.ebb_count < 1) + { + counters_frozen = false; + mb(); + mtspr(SPRN_MMCR0, mfspr(SPRN_MMCR0) & ~MMCR0_FC); + + FAIL_IF(core_busy_loop()); + + counters_frozen = true; + mb(); + mtspr(SPRN_MMCR0, mfspr(SPRN_MMCR0) | MMCR0_FC); + + val = mfspr(SPRN_MMCR0); + if (! (val & MMCR0_FC)) { + printf("Outside of loop, FC NOT set MMCR0 0x%lx\n", val); + fc_cleared = true; + } + } + + ebb_global_disable(); + ebb_freeze_pmcs(); + + count_pmc(1, sample_period); + + dump_ebb_state(); + + printf("EBBs while frozen %d\n", ebbs_while_frozen); + + event_close(&event); + + FAIL_IF(ebb_state.stats.ebb_count == 0); + FAIL_IF(fc_cleared); + + return 0; +} + +int main(void) +{ + return test_harness(cycles_with_freeze, "cycles_with_freeze"); +} diff --git a/tools/testing/selftests/powerpc/pmu/ebb/ebb.c b/tools/testing/selftests/powerpc/pmu/ebb/ebb.c new file mode 100644 index 00000000000..1b46be94b64 --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/ebb/ebb.c @@ -0,0 +1,727 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#define _GNU_SOURCE /* For CPU_ZERO etc. */ + +#include <sched.h> +#include <sys/wait.h> +#include <setjmp.h> +#include <signal.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <sys/ioctl.h> + +#include "trace.h" +#include "reg.h" +#include "ebb.h" + + +void (*ebb_user_func)(void); + +void ebb_hook(void) +{ + if (ebb_user_func) + ebb_user_func(); +} + +struct ebb_state ebb_state; + +u64 sample_period = 0x40000000ull; + +void reset_ebb_with_clear_mask(unsigned long mmcr0_clear_mask) +{ + u64 val; + + /* 2) clear MMCR0[PMAO] - docs say BESCR[PMEO] should do this */ + /* 3) set MMCR0[PMAE] - docs say BESCR[PME] should do this */ + val = mfspr(SPRN_MMCR0); + mtspr(SPRN_MMCR0, (val & ~mmcr0_clear_mask) | MMCR0_PMAE); + + /* 4) clear BESCR[PMEO] */ + mtspr(SPRN_BESCRR, BESCR_PMEO); + + /* 5) set BESCR[PME] */ + mtspr(SPRN_BESCRS, BESCR_PME); + + /* 6) rfebb 1 - done in our caller */ +} + +void reset_ebb(void) +{ + reset_ebb_with_clear_mask(MMCR0_PMAO | MMCR0_FC); +} + +/* Called outside of the EBB handler to check MMCR0 is sane */ +int ebb_check_mmcr0(void) +{ + u64 val; + + val = mfspr(SPRN_MMCR0); + if ((val & (MMCR0_FC | MMCR0_PMAO)) == MMCR0_FC) { + /* It's OK if we see FC & PMAO, but not FC by itself */ + printf("Outside of loop, only FC set 0x%llx\n", val); + return 1; + } + + return 0; +} + +bool ebb_check_count(int pmc, u64 sample_period, int fudge) +{ + u64 count, upper, lower; + + count = ebb_state.stats.pmc_count[PMC_INDEX(pmc)]; + + lower = ebb_state.stats.ebb_count * (sample_period - fudge); + + if (count < lower) { + printf("PMC%d count (0x%llx) below lower limit 0x%llx (-0x%llx)\n", + pmc, count, lower, lower - count); + return false; + } + + upper = ebb_state.stats.ebb_count * (sample_period + fudge); + + if (count > upper) { + printf("PMC%d count (0x%llx) above upper limit 0x%llx (+0x%llx)\n", + pmc, count, upper, count - upper); + return false; + } + + printf("PMC%d count (0x%llx) is between 0x%llx and 0x%llx delta +0x%llx/-0x%llx\n", + pmc, count, lower, upper, count - lower, upper - count); + + return true; +} + +void standard_ebb_callee(void) +{ + int found, i; + u64 val; + + val = mfspr(SPRN_BESCR); + if (!(val & BESCR_PMEO)) { + ebb_state.stats.spurious++; + goto out; + } + + ebb_state.stats.ebb_count++; + trace_log_counter(ebb_state.trace, ebb_state.stats.ebb_count); + + val = mfspr(SPRN_MMCR0); + trace_log_reg(ebb_state.trace, SPRN_MMCR0, val); + + found = 0; + for (i = 1; i <= 6; i++) { + if (ebb_state.pmc_enable[PMC_INDEX(i)]) + found += count_pmc(i, sample_period); + } + + if (!found) + ebb_state.stats.no_overflow++; + +out: + reset_ebb(); +} + +extern void ebb_handler(void); + +void setup_ebb_handler(void (*callee)(void)) +{ + u64 entry; + +#if defined(_CALL_ELF) && _CALL_ELF == 2 + entry = (u64)ebb_handler; +#else + struct opd + { + u64 entry; + u64 toc; + } *opd; + + opd = (struct opd *)ebb_handler; + entry = opd->entry; +#endif + printf("EBB Handler is at %#llx\n", entry); + + ebb_user_func = callee; + + /* Ensure ebb_user_func is set before we set the handler */ + mb(); + mtspr(SPRN_EBBHR, entry); + + /* Make sure the handler is set before we return */ + mb(); +} + +void clear_ebb_stats(void) +{ + memset(&ebb_state.stats, 0, sizeof(ebb_state.stats)); +} + +void dump_summary_ebb_state(void) +{ + printf("ebb_state:\n" \ + " ebb_count = %d\n" \ + " spurious = %d\n" \ + " negative = %d\n" \ + " no_overflow = %d\n" \ + " pmc[1] count = 0x%llx\n" \ + " pmc[2] count = 0x%llx\n" \ + " pmc[3] count = 0x%llx\n" \ + " pmc[4] count = 0x%llx\n" \ + " pmc[5] count = 0x%llx\n" \ + " pmc[6] count = 0x%llx\n", + ebb_state.stats.ebb_count, ebb_state.stats.spurious, + ebb_state.stats.negative, ebb_state.stats.no_overflow, + ebb_state.stats.pmc_count[0], ebb_state.stats.pmc_count[1], + ebb_state.stats.pmc_count[2], ebb_state.stats.pmc_count[3], + ebb_state.stats.pmc_count[4], ebb_state.stats.pmc_count[5]); +} + +static char *decode_mmcr0(u32 value) +{ + static char buf[16]; + + buf[0] = '\0'; + + if (value & (1 << 31)) + strcat(buf, "FC "); + if (value & (1 << 26)) + strcat(buf, "PMAE "); + if (value & (1 << 7)) + strcat(buf, "PMAO "); + + return buf; +} + +static char *decode_bescr(u64 value) +{ + static char buf[16]; + + buf[0] = '\0'; + + if (value & (1ull << 63)) + strcat(buf, "GE "); + if (value & (1ull << 32)) + strcat(buf, "PMAE "); + if (value & 1) + strcat(buf, "PMAO "); + + return buf; +} + +void dump_ebb_hw_state(void) +{ + u64 bescr; + u32 mmcr0; + + mmcr0 = mfspr(SPRN_MMCR0); + bescr = mfspr(SPRN_BESCR); + + printf("HW state:\n" \ + "MMCR0 0x%016x %s\n" \ + "EBBHR 0x%016lx\n" \ + "BESCR 0x%016llx %s\n" \ + "PMC1 0x%016lx\n" \ + "PMC2 0x%016lx\n" \ + "PMC3 0x%016lx\n" \ + "PMC4 0x%016lx\n" \ + "PMC5 0x%016lx\n" \ + "PMC6 0x%016lx\n" \ + "SIAR 0x%016lx\n", + mmcr0, decode_mmcr0(mmcr0), mfspr(SPRN_EBBHR), bescr, + decode_bescr(bescr), mfspr(SPRN_PMC1), mfspr(SPRN_PMC2), + mfspr(SPRN_PMC3), mfspr(SPRN_PMC4), mfspr(SPRN_PMC5), + mfspr(SPRN_PMC6), mfspr(SPRN_SIAR)); +} + +void dump_ebb_state(void) +{ + dump_summary_ebb_state(); + + dump_ebb_hw_state(); + + trace_buffer_print(ebb_state.trace); +} + +int count_pmc(int pmc, uint32_t sample_period) +{ + uint32_t start_value; + u64 val; + + /* 0) Read PMC */ + start_value = pmc_sample_period(sample_period); + + val = read_pmc(pmc); + if (val < start_value) + ebb_state.stats.negative++; + else + ebb_state.stats.pmc_count[PMC_INDEX(pmc)] += val - start_value; + + trace_log_reg(ebb_state.trace, SPRN_PMC1 + pmc - 1, val); + + /* 1) Reset PMC */ + write_pmc(pmc, start_value); + + /* Report if we overflowed */ + return val >= COUNTER_OVERFLOW; +} + +int ebb_event_enable(struct event *e) +{ + int rc; + + /* Ensure any SPR writes are ordered vs us */ + mb(); + + rc = ioctl(e->fd, PERF_EVENT_IOC_ENABLE); + if (rc) + return rc; + + rc = event_read(e); + + /* Ditto */ + mb(); + + return rc; +} + +void ebb_freeze_pmcs(void) +{ + mtspr(SPRN_MMCR0, mfspr(SPRN_MMCR0) | MMCR0_FC); + mb(); +} + +void ebb_unfreeze_pmcs(void) +{ + /* Unfreeze counters */ + mtspr(SPRN_MMCR0, mfspr(SPRN_MMCR0) & ~MMCR0_FC); + mb(); +} + +void ebb_global_enable(void) +{ + /* Enable EBBs globally and PMU EBBs */ + mtspr(SPRN_BESCR, 0x8000000100000000ull); + mb(); +} + +void ebb_global_disable(void) +{ + /* Disable EBBs & freeze counters, events are still scheduled */ + mtspr(SPRN_BESCRR, BESCR_PME); + mb(); +} + +void event_ebb_init(struct event *e) +{ + e->attr.config |= (1ull << 63); +} + +void event_bhrb_init(struct event *e, unsigned ifm) +{ + e->attr.config |= (1ull << 62) | ((u64)ifm << 60); +} + +void event_leader_ebb_init(struct event *e) +{ + event_ebb_init(e); + + e->attr.exclusive = 1; + e->attr.pinned = 1; +} + +int core_busy_loop(void) +{ + int rc; + + asm volatile ( + "li 3, 0x3030\n" + "std 3, -96(1)\n" + "li 4, 0x4040\n" + "std 4, -104(1)\n" + "li 5, 0x5050\n" + "std 5, -112(1)\n" + "li 6, 0x6060\n" + "std 6, -120(1)\n" + "li 7, 0x7070\n" + "std 7, -128(1)\n" + "li 8, 0x0808\n" + "std 8, -136(1)\n" + "li 9, 0x0909\n" + "std 9, -144(1)\n" + "li 10, 0x1010\n" + "std 10, -152(1)\n" + "li 11, 0x1111\n" + "std 11, -160(1)\n" + "li 14, 0x1414\n" + "std 14, -168(1)\n" + "li 15, 0x1515\n" + "std 15, -176(1)\n" + "li 16, 0x1616\n" + "std 16, -184(1)\n" + "li 17, 0x1717\n" + "std 17, -192(1)\n" + "li 18, 0x1818\n" + "std 18, -200(1)\n" + "li 19, 0x1919\n" + "std 19, -208(1)\n" + "li 20, 0x2020\n" + "std 20, -216(1)\n" + "li 21, 0x2121\n" + "std 21, -224(1)\n" + "li 22, 0x2222\n" + "std 22, -232(1)\n" + "li 23, 0x2323\n" + "std 23, -240(1)\n" + "li 24, 0x2424\n" + "std 24, -248(1)\n" + "li 25, 0x2525\n" + "std 25, -256(1)\n" + "li 26, 0x2626\n" + "std 26, -264(1)\n" + "li 27, 0x2727\n" + "std 27, -272(1)\n" + "li 28, 0x2828\n" + "std 28, -280(1)\n" + "li 29, 0x2929\n" + "std 29, -288(1)\n" + "li 30, 0x3030\n" + "li 31, 0x3131\n" + + "li 3, 0\n" + "0: " + "addi 3, 3, 1\n" + "cmpwi 3, 100\n" + "blt 0b\n" + + /* Return 1 (fail) unless we get through all the checks */ + "li 0, 1\n" + + /* Check none of our registers have been corrupted */ + "cmpwi 4, 0x4040\n" + "bne 1f\n" + "cmpwi 5, 0x5050\n" + "bne 1f\n" + "cmpwi 6, 0x6060\n" + "bne 1f\n" + "cmpwi 7, 0x7070\n" + "bne 1f\n" + "cmpwi 8, 0x0808\n" + "bne 1f\n" + "cmpwi 9, 0x0909\n" + "bne 1f\n" + "cmpwi 10, 0x1010\n" + "bne 1f\n" + "cmpwi 11, 0x1111\n" + "bne 1f\n" + "cmpwi 14, 0x1414\n" + "bne 1f\n" + "cmpwi 15, 0x1515\n" + "bne 1f\n" + "cmpwi 16, 0x1616\n" + "bne 1f\n" + "cmpwi 17, 0x1717\n" + "bne 1f\n" + "cmpwi 18, 0x1818\n" + "bne 1f\n" + "cmpwi 19, 0x1919\n" + "bne 1f\n" + "cmpwi 20, 0x2020\n" + "bne 1f\n" + "cmpwi 21, 0x2121\n" + "bne 1f\n" + "cmpwi 22, 0x2222\n" + "bne 1f\n" + "cmpwi 23, 0x2323\n" + "bne 1f\n" + "cmpwi 24, 0x2424\n" + "bne 1f\n" + "cmpwi 25, 0x2525\n" + "bne 1f\n" + "cmpwi 26, 0x2626\n" + "bne 1f\n" + "cmpwi 27, 0x2727\n" + "bne 1f\n" + "cmpwi 28, 0x2828\n" + "bne 1f\n" + "cmpwi 29, 0x2929\n" + "bne 1f\n" + "cmpwi 30, 0x3030\n" + "bne 1f\n" + "cmpwi 31, 0x3131\n" + "bne 1f\n" + + /* Load junk into all our registers before we reload them from the stack. */ + "li 3, 0xde\n" + "li 4, 0xad\n" + "li 5, 0xbe\n" + "li 6, 0xef\n" + "li 7, 0xde\n" + "li 8, 0xad\n" + "li 9, 0xbe\n" + "li 10, 0xef\n" + "li 11, 0xde\n" + "li 14, 0xad\n" + "li 15, 0xbe\n" + "li 16, 0xef\n" + "li 17, 0xde\n" + "li 18, 0xad\n" + "li 19, 0xbe\n" + "li 20, 0xef\n" + "li 21, 0xde\n" + "li 22, 0xad\n" + "li 23, 0xbe\n" + "li 24, 0xef\n" + "li 25, 0xde\n" + "li 26, 0xad\n" + "li 27, 0xbe\n" + "li 28, 0xef\n" + "li 29, 0xdd\n" + + "ld 3, -96(1)\n" + "cmpwi 3, 0x3030\n" + "bne 1f\n" + "ld 4, -104(1)\n" + "cmpwi 4, 0x4040\n" + "bne 1f\n" + "ld 5, -112(1)\n" + "cmpwi 5, 0x5050\n" + "bne 1f\n" + "ld 6, -120(1)\n" + "cmpwi 6, 0x6060\n" + "bne 1f\n" + "ld 7, -128(1)\n" + "cmpwi 7, 0x7070\n" + "bne 1f\n" + "ld 8, -136(1)\n" + "cmpwi 8, 0x0808\n" + "bne 1f\n" + "ld 9, -144(1)\n" + "cmpwi 9, 0x0909\n" + "bne 1f\n" + "ld 10, -152(1)\n" + "cmpwi 10, 0x1010\n" + "bne 1f\n" + "ld 11, -160(1)\n" + "cmpwi 11, 0x1111\n" + "bne 1f\n" + "ld 14, -168(1)\n" + "cmpwi 14, 0x1414\n" + "bne 1f\n" + "ld 15, -176(1)\n" + "cmpwi 15, 0x1515\n" + "bne 1f\n" + "ld 16, -184(1)\n" + "cmpwi 16, 0x1616\n" + "bne 1f\n" + "ld 17, -192(1)\n" + "cmpwi 17, 0x1717\n" + "bne 1f\n" + "ld 18, -200(1)\n" + "cmpwi 18, 0x1818\n" + "bne 1f\n" + "ld 19, -208(1)\n" + "cmpwi 19, 0x1919\n" + "bne 1f\n" + "ld 20, -216(1)\n" + "cmpwi 20, 0x2020\n" + "bne 1f\n" + "ld 21, -224(1)\n" + "cmpwi 21, 0x2121\n" + "bne 1f\n" + "ld 22, -232(1)\n" + "cmpwi 22, 0x2222\n" + "bne 1f\n" + "ld 23, -240(1)\n" + "cmpwi 23, 0x2323\n" + "bne 1f\n" + "ld 24, -248(1)\n" + "cmpwi 24, 0x2424\n" + "bne 1f\n" + "ld 25, -256(1)\n" + "cmpwi 25, 0x2525\n" + "bne 1f\n" + "ld 26, -264(1)\n" + "cmpwi 26, 0x2626\n" + "bne 1f\n" + "ld 27, -272(1)\n" + "cmpwi 27, 0x2727\n" + "bne 1f\n" + "ld 28, -280(1)\n" + "cmpwi 28, 0x2828\n" + "bne 1f\n" + "ld 29, -288(1)\n" + "cmpwi 29, 0x2929\n" + "bne 1f\n" + + /* Load 0 (success) to return */ + "li 0, 0\n" + + "1: mr %0, 0\n" + + : "=r" (rc) + : /* no inputs */ + : "3", "4", "5", "6", "7", "8", "9", "10", "11", "14", + "15", "16", "17", "18", "19", "20", "21", "22", "23", + "24", "25", "26", "27", "28", "29", "30", "31", + "memory" + ); + + return rc; +} + +int core_busy_loop_with_freeze(void) +{ + int rc; + + mtspr(SPRN_MMCR0, mfspr(SPRN_MMCR0) & ~MMCR0_FC); + rc = core_busy_loop(); + mtspr(SPRN_MMCR0, mfspr(SPRN_MMCR0) | MMCR0_FC); + + return rc; +} + +int ebb_child(union pipe read_pipe, union pipe write_pipe) +{ + struct event event; + uint64_t val; + + FAIL_IF(wait_for_parent(read_pipe)); + + event_init_named(&event, 0x1001e, "cycles"); + event_leader_ebb_init(&event); + + event.attr.exclude_kernel = 1; + event.attr.exclude_hv = 1; + event.attr.exclude_idle = 1; + + FAIL_IF(event_open(&event)); + + ebb_enable_pmc_counting(1); + setup_ebb_handler(standard_ebb_callee); + ebb_global_enable(); + + FAIL_IF(event_enable(&event)); + + if (event_read(&event)) { + /* + * Some tests expect to fail here, so don't report an error on + * this line, and return a distinguisable error code. Tell the + * parent an error happened. + */ + notify_parent_of_error(write_pipe); + return 2; + } + + mtspr(SPRN_PMC1, pmc_sample_period(sample_period)); + + FAIL_IF(notify_parent(write_pipe)); + FAIL_IF(wait_for_parent(read_pipe)); + FAIL_IF(notify_parent(write_pipe)); + + while (ebb_state.stats.ebb_count < 20) { + FAIL_IF(core_busy_loop()); + + /* To try and hit SIGILL case */ + val = mfspr(SPRN_MMCRA); + val |= mfspr(SPRN_MMCR2); + val |= mfspr(SPRN_MMCR0); + } + + ebb_global_disable(); + ebb_freeze_pmcs(); + + count_pmc(1, sample_period); + + dump_ebb_state(); + + event_close(&event); + + FAIL_IF(ebb_state.stats.ebb_count == 0); + + return 0; +} + +static jmp_buf setjmp_env; + +static void sigill_handler(int signal) +{ + printf("Took sigill\n"); + longjmp(setjmp_env, 1); +} + +static struct sigaction sigill_action = { + .sa_handler = sigill_handler, +}; + +int catch_sigill(void (*func)(void)) +{ + if (sigaction(SIGILL, &sigill_action, NULL)) { + perror("sigaction"); + return 1; + } + + if (setjmp(setjmp_env) == 0) { + func(); + return 1; + } + + return 0; +} + +void write_pmc1(void) +{ + mtspr(SPRN_PMC1, 0); +} + +void write_pmc(int pmc, u64 value) +{ + switch (pmc) { + case 1: mtspr(SPRN_PMC1, value); break; + case 2: mtspr(SPRN_PMC2, value); break; + case 3: mtspr(SPRN_PMC3, value); break; + case 4: mtspr(SPRN_PMC4, value); break; + case 5: mtspr(SPRN_PMC5, value); break; + case 6: mtspr(SPRN_PMC6, value); break; + } +} + +u64 read_pmc(int pmc) +{ + switch (pmc) { + case 1: return mfspr(SPRN_PMC1); + case 2: return mfspr(SPRN_PMC2); + case 3: return mfspr(SPRN_PMC3); + case 4: return mfspr(SPRN_PMC4); + case 5: return mfspr(SPRN_PMC5); + case 6: return mfspr(SPRN_PMC6); + } + + return 0; +} + +static void term_handler(int signal) +{ + dump_summary_ebb_state(); + dump_ebb_hw_state(); + abort(); +} + +struct sigaction term_action = { + .sa_handler = term_handler, +}; + +static void __attribute__((constructor)) ebb_init(void) +{ + clear_ebb_stats(); + + if (sigaction(SIGTERM, &term_action, NULL)) + perror("sigaction"); + + ebb_state.trace = trace_buffer_allocate(1 * 1024 * 1024); +} diff --git a/tools/testing/selftests/powerpc/pmu/ebb/ebb.h b/tools/testing/selftests/powerpc/pmu/ebb/ebb.h new file mode 100644 index 00000000000..e62bde05bf7 --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/ebb/ebb.h @@ -0,0 +1,78 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#ifndef _SELFTESTS_POWERPC_PMU_EBB_EBB_H +#define _SELFTESTS_POWERPC_PMU_EBB_EBB_H + +#include "../event.h" +#include "../lib.h" +#include "trace.h" +#include "reg.h" + +#define PMC_INDEX(pmc) ((pmc)-1) + +#define NUM_PMC_VALUES 128 + +struct ebb_state +{ + struct { + u64 pmc_count[6]; + volatile int ebb_count; + int spurious; + int negative; + int no_overflow; + } stats; + + bool pmc_enable[6]; + struct trace_buffer *trace; +}; + +extern struct ebb_state ebb_state; + +#define COUNTER_OVERFLOW 0x80000000ull + +static inline uint32_t pmc_sample_period(uint32_t value) +{ + return COUNTER_OVERFLOW - value; +} + +static inline void ebb_enable_pmc_counting(int pmc) +{ + ebb_state.pmc_enable[PMC_INDEX(pmc)] = true; +} + +bool ebb_check_count(int pmc, u64 sample_period, int fudge); +void event_leader_ebb_init(struct event *e); +void event_ebb_init(struct event *e); +void event_bhrb_init(struct event *e, unsigned ifm); +void setup_ebb_handler(void (*callee)(void)); +void standard_ebb_callee(void); +int ebb_event_enable(struct event *e); +void ebb_global_enable(void); +void ebb_global_disable(void); +void ebb_freeze_pmcs(void); +void ebb_unfreeze_pmcs(void); +void event_ebb_init(struct event *e); +void event_leader_ebb_init(struct event *e); +int count_pmc(int pmc, uint32_t sample_period); +void dump_ebb_state(void); +void dump_summary_ebb_state(void); +void dump_ebb_hw_state(void); +void clear_ebb_stats(void); +void write_pmc(int pmc, u64 value); +u64 read_pmc(int pmc); +void reset_ebb_with_clear_mask(unsigned long mmcr0_clear_mask); +void reset_ebb(void); +int ebb_check_mmcr0(void); + +extern u64 sample_period; + +int core_busy_loop(void); +int core_busy_loop_with_freeze(void); +int ebb_child(union pipe read_pipe, union pipe write_pipe); +int catch_sigill(void (*func)(void)); +void write_pmc1(void); + +#endif /* _SELFTESTS_POWERPC_PMU_EBB_EBB_H */ diff --git a/tools/testing/selftests/powerpc/pmu/ebb/ebb_handler.S b/tools/testing/selftests/powerpc/pmu/ebb/ebb_handler.S new file mode 100644 index 00000000000..14274ea206e --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/ebb/ebb_handler.S @@ -0,0 +1,365 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#include <ppc-asm.h> +#include "reg.h" + + +/* ppc-asm.h defines most of the reg aliases, but not r1/r2. */ +#define r1 1 +#define r2 2 + +#define RFEBB .long 0x4c000924 + +/* Stack layout: + * + * ^ + * User stack | + * Back chain ------+ <- r1 <-------+ + * ... | + * Red zone / ABI Gap | + * ... | + * vr63 <+ | + * vr0 | | + * VSCR | | + * FSCR | | + * r31 | Save area | + * r0 | | + * XER | | + * CTR | | + * LR | | + * CCR <+ | + * ... <+ | + * LR | Caller frame | + * CCR | | + * Back chain <+ <- updated r1 --------+ + * + */ + +#if defined(_CALL_ELF) && _CALL_ELF == 2 +#define ABIGAP 512 +#else +#define ABIGAP 288 +#endif + +#define NR_GPR 32 +#define NR_SPR 6 +#define NR_VSR 64 + +#define SAVE_AREA ((NR_GPR + NR_SPR) * 8 + (NR_VSR * 16)) +#define CALLER_FRAME 112 + +#define STACK_FRAME (ABIGAP + SAVE_AREA + CALLER_FRAME) + +#define CCR_SAVE (CALLER_FRAME) +#define LR_SAVE (CCR_SAVE + 8) +#define CTR_SAVE (LR_SAVE + 8) +#define XER_SAVE (CTR_SAVE + 8) +#define GPR_SAVE(n) (XER_SAVE + 8 + (8 * n)) +#define FSCR_SAVE (GPR_SAVE(31) + 8) +#define VSCR_SAVE (FSCR_SAVE + 8) +#define VSR_SAVE(n) (VSCR_SAVE + 8 + (16 * n)) + +#define SAVE_GPR(n) std n,GPR_SAVE(n)(r1) +#define REST_GPR(n) ld n,GPR_SAVE(n)(r1) +#define TRASH_GPR(n) lis n,0xaaaa + +#define SAVE_VSR(n, b) li b, VSR_SAVE(n); stxvd2x n,b,r1 +#define LOAD_VSR(n, b) li b, VSR_SAVE(n); lxvd2x n,b,r1 + +#define LOAD_REG_IMMEDIATE(reg,expr) \ + lis reg,(expr)@highest; \ + ori reg,reg,(expr)@higher; \ + rldicr reg,reg,32,31; \ + oris reg,reg,(expr)@h; \ + ori reg,reg,(expr)@l; + + +#if defined(_CALL_ELF) && _CALL_ELF == 2 +#define ENTRY_POINT(name) \ + .type FUNC_NAME(name),@function; \ + .globl FUNC_NAME(name); \ + FUNC_NAME(name): + +#define RESTORE_TOC(name) \ + /* Restore our TOC pointer using our entry point */ \ + LOAD_REG_IMMEDIATE(r12, name) \ +0: addis r2,r12,(.TOC.-0b)@ha; \ + addi r2,r2,(.TOC.-0b)@l; + +#else +#define ENTRY_POINT(name) FUNC_START(name) +#define RESTORE_TOC(name) \ + /* Restore our TOC pointer via our opd entry */ \ + LOAD_REG_IMMEDIATE(r2, name) \ + ld r2,8(r2); +#endif + + .text + +ENTRY_POINT(ebb_handler) + stdu r1,-STACK_FRAME(r1) + SAVE_GPR(0) + mflr r0 + std r0,LR_SAVE(r1) + mfcr r0 + std r0,CCR_SAVE(r1) + mfctr r0 + std r0,CTR_SAVE(r1) + mfxer r0 + std r0,XER_SAVE(r1) + SAVE_GPR(2) + SAVE_GPR(3) + SAVE_GPR(4) + SAVE_GPR(5) + SAVE_GPR(6) + SAVE_GPR(7) + SAVE_GPR(8) + SAVE_GPR(9) + SAVE_GPR(10) + SAVE_GPR(11) + SAVE_GPR(12) + SAVE_GPR(13) + SAVE_GPR(14) + SAVE_GPR(15) + SAVE_GPR(16) + SAVE_GPR(17) + SAVE_GPR(18) + SAVE_GPR(19) + SAVE_GPR(20) + SAVE_GPR(21) + SAVE_GPR(22) + SAVE_GPR(23) + SAVE_GPR(24) + SAVE_GPR(25) + SAVE_GPR(26) + SAVE_GPR(27) + SAVE_GPR(28) + SAVE_GPR(29) + SAVE_GPR(30) + SAVE_GPR(31) + SAVE_VSR(0, r3) + mffs f0 + stfd f0, FSCR_SAVE(r1) + mfvscr f0 + stfd f0, VSCR_SAVE(r1) + SAVE_VSR(1, r3) + SAVE_VSR(2, r3) + SAVE_VSR(3, r3) + SAVE_VSR(4, r3) + SAVE_VSR(5, r3) + SAVE_VSR(6, r3) + SAVE_VSR(7, r3) + SAVE_VSR(8, r3) + SAVE_VSR(9, r3) + SAVE_VSR(10, r3) + SAVE_VSR(11, r3) + SAVE_VSR(12, r3) + SAVE_VSR(13, r3) + SAVE_VSR(14, r3) + SAVE_VSR(15, r3) + SAVE_VSR(16, r3) + SAVE_VSR(17, r3) + SAVE_VSR(18, r3) + SAVE_VSR(19, r3) + SAVE_VSR(20, r3) + SAVE_VSR(21, r3) + SAVE_VSR(22, r3) + SAVE_VSR(23, r3) + SAVE_VSR(24, r3) + SAVE_VSR(25, r3) + SAVE_VSR(26, r3) + SAVE_VSR(27, r3) + SAVE_VSR(28, r3) + SAVE_VSR(29, r3) + SAVE_VSR(30, r3) + SAVE_VSR(31, r3) + SAVE_VSR(32, r3) + SAVE_VSR(33, r3) + SAVE_VSR(34, r3) + SAVE_VSR(35, r3) + SAVE_VSR(36, r3) + SAVE_VSR(37, r3) + SAVE_VSR(38, r3) + SAVE_VSR(39, r3) + SAVE_VSR(40, r3) + SAVE_VSR(41, r3) + SAVE_VSR(42, r3) + SAVE_VSR(43, r3) + SAVE_VSR(44, r3) + SAVE_VSR(45, r3) + SAVE_VSR(46, r3) + SAVE_VSR(47, r3) + SAVE_VSR(48, r3) + SAVE_VSR(49, r3) + SAVE_VSR(50, r3) + SAVE_VSR(51, r3) + SAVE_VSR(52, r3) + SAVE_VSR(53, r3) + SAVE_VSR(54, r3) + SAVE_VSR(55, r3) + SAVE_VSR(56, r3) + SAVE_VSR(57, r3) + SAVE_VSR(58, r3) + SAVE_VSR(59, r3) + SAVE_VSR(60, r3) + SAVE_VSR(61, r3) + SAVE_VSR(62, r3) + SAVE_VSR(63, r3) + + TRASH_GPR(2) + TRASH_GPR(3) + TRASH_GPR(4) + TRASH_GPR(5) + TRASH_GPR(6) + TRASH_GPR(7) + TRASH_GPR(8) + TRASH_GPR(9) + TRASH_GPR(10) + TRASH_GPR(11) + TRASH_GPR(12) + TRASH_GPR(14) + TRASH_GPR(15) + TRASH_GPR(16) + TRASH_GPR(17) + TRASH_GPR(18) + TRASH_GPR(19) + TRASH_GPR(20) + TRASH_GPR(21) + TRASH_GPR(22) + TRASH_GPR(23) + TRASH_GPR(24) + TRASH_GPR(25) + TRASH_GPR(26) + TRASH_GPR(27) + TRASH_GPR(28) + TRASH_GPR(29) + TRASH_GPR(30) + TRASH_GPR(31) + + RESTORE_TOC(ebb_handler) + + /* + * r13 is our TLS pointer. We leave whatever value was in there when the + * EBB fired. That seems to be OK because once set the TLS pointer is not + * changed - but presumably that could change in future. + */ + + bl ebb_hook + nop + + /* r2 may be changed here but we don't care */ + + lfd f0, FSCR_SAVE(r1) + mtfsf 0xff,f0 + lfd f0, VSCR_SAVE(r1) + mtvscr f0 + LOAD_VSR(0, r3) + LOAD_VSR(1, r3) + LOAD_VSR(2, r3) + LOAD_VSR(3, r3) + LOAD_VSR(4, r3) + LOAD_VSR(5, r3) + LOAD_VSR(6, r3) + LOAD_VSR(7, r3) + LOAD_VSR(8, r3) + LOAD_VSR(9, r3) + LOAD_VSR(10, r3) + LOAD_VSR(11, r3) + LOAD_VSR(12, r3) + LOAD_VSR(13, r3) + LOAD_VSR(14, r3) + LOAD_VSR(15, r3) + LOAD_VSR(16, r3) + LOAD_VSR(17, r3) + LOAD_VSR(18, r3) + LOAD_VSR(19, r3) + LOAD_VSR(20, r3) + LOAD_VSR(21, r3) + LOAD_VSR(22, r3) + LOAD_VSR(23, r3) + LOAD_VSR(24, r3) + LOAD_VSR(25, r3) + LOAD_VSR(26, r3) + LOAD_VSR(27, r3) + LOAD_VSR(28, r3) + LOAD_VSR(29, r3) + LOAD_VSR(30, r3) + LOAD_VSR(31, r3) + LOAD_VSR(32, r3) + LOAD_VSR(33, r3) + LOAD_VSR(34, r3) + LOAD_VSR(35, r3) + LOAD_VSR(36, r3) + LOAD_VSR(37, r3) + LOAD_VSR(38, r3) + LOAD_VSR(39, r3) + LOAD_VSR(40, r3) + LOAD_VSR(41, r3) + LOAD_VSR(42, r3) + LOAD_VSR(43, r3) + LOAD_VSR(44, r3) + LOAD_VSR(45, r3) + LOAD_VSR(46, r3) + LOAD_VSR(47, r3) + LOAD_VSR(48, r3) + LOAD_VSR(49, r3) + LOAD_VSR(50, r3) + LOAD_VSR(51, r3) + LOAD_VSR(52, r3) + LOAD_VSR(53, r3) + LOAD_VSR(54, r3) + LOAD_VSR(55, r3) + LOAD_VSR(56, r3) + LOAD_VSR(57, r3) + LOAD_VSR(58, r3) + LOAD_VSR(59, r3) + LOAD_VSR(60, r3) + LOAD_VSR(61, r3) + LOAD_VSR(62, r3) + LOAD_VSR(63, r3) + + ld r0,XER_SAVE(r1) + mtxer r0 + ld r0,CTR_SAVE(r1) + mtctr r0 + ld r0,LR_SAVE(r1) + mtlr r0 + ld r0,CCR_SAVE(r1) + mtcr r0 + REST_GPR(0) + REST_GPR(2) + REST_GPR(3) + REST_GPR(4) + REST_GPR(5) + REST_GPR(6) + REST_GPR(7) + REST_GPR(8) + REST_GPR(9) + REST_GPR(10) + REST_GPR(11) + REST_GPR(12) + REST_GPR(13) + REST_GPR(14) + REST_GPR(15) + REST_GPR(16) + REST_GPR(17) + REST_GPR(18) + REST_GPR(19) + REST_GPR(20) + REST_GPR(21) + REST_GPR(22) + REST_GPR(23) + REST_GPR(24) + REST_GPR(25) + REST_GPR(26) + REST_GPR(27) + REST_GPR(28) + REST_GPR(29) + REST_GPR(30) + REST_GPR(31) + addi r1,r1,STACK_FRAME + RFEBB +FUNC_END(ebb_handler) diff --git a/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_child_test.c b/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_child_test.c new file mode 100644 index 00000000000..c45f948148e --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_child_test.c @@ -0,0 +1,86 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#include <signal.h> +#include <stdio.h> +#include <stdlib.h> +#include <stdbool.h> +#include <sys/types.h> +#include <sys/wait.h> +#include <unistd.h> + +#include "ebb.h" + + +/* + * Tests we can setup an EBB on our child. Nothing interesting happens, because + * even though the event is enabled and running the child hasn't enabled the + * actual delivery of the EBBs. + */ + +static int victim_child(union pipe read_pipe, union pipe write_pipe) +{ + int i; + + FAIL_IF(wait_for_parent(read_pipe)); + FAIL_IF(notify_parent(write_pipe)); + + /* Parent creates EBB event */ + + FAIL_IF(wait_for_parent(read_pipe)); + FAIL_IF(notify_parent(write_pipe)); + + /* Check the EBB is enabled by writing PMC1 */ + write_pmc1(); + + /* EBB event is enabled here */ + for (i = 0; i < 1000000; i++) ; + + return 0; +} + +int ebb_on_child(void) +{ + union pipe read_pipe, write_pipe; + struct event event; + pid_t pid; + + FAIL_IF(pipe(read_pipe.fds) == -1); + FAIL_IF(pipe(write_pipe.fds) == -1); + + pid = fork(); + if (pid == 0) { + /* NB order of pipes looks reversed */ + exit(victim_child(write_pipe, read_pipe)); + } + + FAIL_IF(sync_with_child(read_pipe, write_pipe)); + + /* Child is running now */ + + event_init_named(&event, 0x1001e, "cycles"); + event_leader_ebb_init(&event); + + event.attr.exclude_kernel = 1; + event.attr.exclude_hv = 1; + event.attr.exclude_idle = 1; + + FAIL_IF(event_open_with_pid(&event, pid)); + FAIL_IF(ebb_event_enable(&event)); + + FAIL_IF(sync_with_child(read_pipe, write_pipe)); + + /* Child should just exit happily */ + FAIL_IF(wait_for_child(pid)); + + event_close(&event); + + return 0; +} + +int main(void) +{ + return test_harness(ebb_on_child, "ebb_on_child"); +} diff --git a/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_willing_child_test.c b/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_willing_child_test.c new file mode 100644 index 00000000000..11acf1d55f8 --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_willing_child_test.c @@ -0,0 +1,92 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#include <signal.h> +#include <stdio.h> +#include <stdlib.h> +#include <stdbool.h> +#include <sys/types.h> +#include <sys/wait.h> +#include <unistd.h> + +#include "ebb.h" + + +/* + * Tests we can setup an EBB on our child. The child expects this and enables + * EBBs, which are then delivered to the child, even though the event is + * created by the parent. + */ + +static int victim_child(union pipe read_pipe, union pipe write_pipe) +{ + FAIL_IF(wait_for_parent(read_pipe)); + + /* Setup our EBB handler, before the EBB event is created */ + ebb_enable_pmc_counting(1); + setup_ebb_handler(standard_ebb_callee); + ebb_global_enable(); + + FAIL_IF(notify_parent(write_pipe)); + + while (ebb_state.stats.ebb_count < 20) { + FAIL_IF(core_busy_loop()); + } + + ebb_global_disable(); + ebb_freeze_pmcs(); + + count_pmc(1, sample_period); + + dump_ebb_state(); + + FAIL_IF(ebb_state.stats.ebb_count == 0); + + return 0; +} + +/* Tests we can setup an EBB on our child - if it's expecting it */ +int ebb_on_willing_child(void) +{ + union pipe read_pipe, write_pipe; + struct event event; + pid_t pid; + + FAIL_IF(pipe(read_pipe.fds) == -1); + FAIL_IF(pipe(write_pipe.fds) == -1); + + pid = fork(); + if (pid == 0) { + /* NB order of pipes looks reversed */ + exit(victim_child(write_pipe, read_pipe)); + } + + /* Signal the child to setup its EBB handler */ + FAIL_IF(sync_with_child(read_pipe, write_pipe)); + + /* Child is running now */ + + event_init_named(&event, 0x1001e, "cycles"); + event_leader_ebb_init(&event); + + event.attr.exclude_kernel = 1; + event.attr.exclude_hv = 1; + event.attr.exclude_idle = 1; + + FAIL_IF(event_open_with_pid(&event, pid)); + FAIL_IF(ebb_event_enable(&event)); + + /* Child show now take EBBs and then exit */ + FAIL_IF(wait_for_child(pid)); + + event_close(&event); + + return 0; +} + +int main(void) +{ + return test_harness(ebb_on_willing_child, "ebb_on_willing_child"); +} diff --git a/tools/testing/selftests/powerpc/pmu/ebb/ebb_vs_cpu_event_test.c b/tools/testing/selftests/powerpc/pmu/ebb/ebb_vs_cpu_event_test.c new file mode 100644 index 00000000000..be4dd5a4e98 --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/ebb/ebb_vs_cpu_event_test.c @@ -0,0 +1,86 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#include <signal.h> +#include <stdio.h> +#include <stdlib.h> +#include <stdbool.h> +#include <sys/types.h> +#include <sys/wait.h> +#include <unistd.h> + +#include "ebb.h" + + +/* + * Tests an EBB vs a cpu event - in that order. The EBB should force the cpu + * event off the PMU. + */ + +static int setup_cpu_event(struct event *event, int cpu) +{ + event_init_named(event, 0x400FA, "PM_RUN_INST_CMPL"); + + event->attr.exclude_kernel = 1; + event->attr.exclude_hv = 1; + event->attr.exclude_idle = 1; + + SKIP_IF(require_paranoia_below(1)); + FAIL_IF(event_open_with_cpu(event, cpu)); + FAIL_IF(event_enable(event)); + + return 0; +} + +int ebb_vs_cpu_event(void) +{ + union pipe read_pipe, write_pipe; + struct event event; + int cpu, rc; + pid_t pid; + + cpu = pick_online_cpu(); + FAIL_IF(cpu < 0); + FAIL_IF(bind_to_cpu(cpu)); + + FAIL_IF(pipe(read_pipe.fds) == -1); + FAIL_IF(pipe(write_pipe.fds) == -1); + + pid = fork(); + if (pid == 0) { + /* NB order of pipes looks reversed */ + exit(ebb_child(write_pipe, read_pipe)); + } + + /* Signal the child to install its EBB event and wait */ + FAIL_IF(sync_with_child(read_pipe, write_pipe)); + + /* Now try to install our CPU event */ + rc = setup_cpu_event(&event, cpu); + if (rc) { + kill_child_and_wait(pid); + return rc; + } + + /* Signal the child to run */ + FAIL_IF(sync_with_child(read_pipe, write_pipe)); + + /* .. and wait for it to complete */ + FAIL_IF(wait_for_child(pid)); + FAIL_IF(event_disable(&event)); + FAIL_IF(event_read(&event)); + + event_report(&event); + + /* The cpu event may have run, but we don't expect 100% */ + FAIL_IF(event.result.enabled >= event.result.running); + + return 0; +} + +int main(void) +{ + return test_harness(ebb_vs_cpu_event, "ebb_vs_cpu_event"); +} diff --git a/tools/testing/selftests/powerpc/pmu/ebb/event_attributes_test.c b/tools/testing/selftests/powerpc/pmu/ebb/event_attributes_test.c new file mode 100644 index 00000000000..7e78153f08e --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/ebb/event_attributes_test.c @@ -0,0 +1,131 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#include <stdio.h> +#include <stdlib.h> + +#include "ebb.h" + + +/* + * Test various attributes of the EBB event are enforced. + */ +int event_attributes(void) +{ + struct event event, leader; + + event_init(&event, 0x1001e); + event_leader_ebb_init(&event); + /* Expected to succeed */ + FAIL_IF(event_open(&event)); + event_close(&event); + + + event_init(&event, 0x001e); /* CYCLES - no PMC specified */ + event_leader_ebb_init(&event); + /* Expected to fail, no PMC specified */ + FAIL_IF(event_open(&event) == 0); + + + event_init(&event, 0x2001e); + event_leader_ebb_init(&event); + event.attr.exclusive = 0; + /* Expected to fail, not exclusive */ + FAIL_IF(event_open(&event) == 0); + + + event_init(&event, 0x3001e); + event_leader_ebb_init(&event); + event.attr.freq = 1; + /* Expected to fail, sets freq */ + FAIL_IF(event_open(&event) == 0); + + + event_init(&event, 0x4001e); + event_leader_ebb_init(&event); + event.attr.sample_period = 1; + /* Expected to fail, sets sample_period */ + FAIL_IF(event_open(&event) == 0); + + + event_init(&event, 0x1001e); + event_leader_ebb_init(&event); + event.attr.enable_on_exec = 1; + /* Expected to fail, sets enable_on_exec */ + FAIL_IF(event_open(&event) == 0); + + + event_init(&event, 0x1001e); + event_leader_ebb_init(&event); + event.attr.inherit = 1; + /* Expected to fail, sets inherit */ + FAIL_IF(event_open(&event) == 0); + + + event_init(&leader, 0x1001e); + event_leader_ebb_init(&leader); + FAIL_IF(event_open(&leader)); + + event_init(&event, 0x20002); + event_ebb_init(&event); + + /* Expected to succeed */ + FAIL_IF(event_open_with_group(&event, leader.fd)); + event_close(&leader); + event_close(&event); + + + event_init(&leader, 0x1001e); + event_leader_ebb_init(&leader); + FAIL_IF(event_open(&leader)); + + event_init(&event, 0x20002); + + /* Expected to fail, event doesn't request EBB, leader does */ + FAIL_IF(event_open_with_group(&event, leader.fd) == 0); + event_close(&leader); + + + event_init(&leader, 0x1001e); + event_leader_ebb_init(&leader); + /* Clear the EBB flag */ + leader.attr.config &= ~(1ull << 63); + + FAIL_IF(event_open(&leader)); + + event_init(&event, 0x20002); + event_ebb_init(&event); + + /* Expected to fail, leader doesn't request EBB */ + FAIL_IF(event_open_with_group(&event, leader.fd) == 0); + event_close(&leader); + + + event_init(&leader, 0x1001e); + event_leader_ebb_init(&leader); + leader.attr.exclusive = 0; + /* Expected to fail, leader isn't exclusive */ + FAIL_IF(event_open(&leader) == 0); + + + event_init(&leader, 0x1001e); + event_leader_ebb_init(&leader); + leader.attr.pinned = 0; + /* Expected to fail, leader isn't pinned */ + FAIL_IF(event_open(&leader) == 0); + + event_init(&event, 0x1001e); + event_leader_ebb_init(&event); + /* Expected to fail, not a task event */ + SKIP_IF(require_paranoia_below(1)); + FAIL_IF(event_open_with_cpu(&event, 0) == 0); + + return 0; +} + +int main(void) +{ + return test_harness(event_attributes, "event_attributes"); +} diff --git a/tools/testing/selftests/powerpc/pmu/ebb/fixed_instruction_loop.S b/tools/testing/selftests/powerpc/pmu/ebb/fixed_instruction_loop.S new file mode 100644 index 00000000000..b866a0581d3 --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/ebb/fixed_instruction_loop.S @@ -0,0 +1,43 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#include <ppc-asm.h> + + .text + +FUNC_START(thirty_two_instruction_loop) + cmpwi r3,0 + beqlr + addi r4,r3,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 # 28 addi's + subi r3,r3,1 + b FUNC_NAME(thirty_two_instruction_loop) +FUNC_END(thirty_two_instruction_loop) diff --git a/tools/testing/selftests/powerpc/pmu/ebb/fork_cleanup_test.c b/tools/testing/selftests/powerpc/pmu/ebb/fork_cleanup_test.c new file mode 100644 index 00000000000..9e7af6e7662 --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/ebb/fork_cleanup_test.c @@ -0,0 +1,79 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#include <signal.h> +#include <stdio.h> +#include <stdlib.h> +#include <stdbool.h> +#include <sys/types.h> +#include <sys/wait.h> +#include <unistd.h> +#include <setjmp.h> +#include <signal.h> + +#include "ebb.h" + + +/* + * Test that a fork clears the PMU state of the child. eg. BESCR/EBBHR/EBBRR + * are cleared, and MMCR0_PMCC is reset, preventing the child from accessing + * the PMU. + */ + +static struct event event; + +static int child(void) +{ + /* Even though we have EBE=0 we can still see the EBB regs */ + FAIL_IF(mfspr(SPRN_BESCR) != 0); + FAIL_IF(mfspr(SPRN_EBBHR) != 0); + FAIL_IF(mfspr(SPRN_EBBRR) != 0); + + FAIL_IF(catch_sigill(write_pmc1)); + + /* We can still read from the event, though it is on our parent */ + FAIL_IF(event_read(&event)); + + return 0; +} + +/* Tests that fork clears EBB state */ +int fork_cleanup(void) +{ + pid_t pid; + + event_init_named(&event, 0x1001e, "cycles"); + event_leader_ebb_init(&event); + + FAIL_IF(event_open(&event)); + + ebb_enable_pmc_counting(1); + setup_ebb_handler(standard_ebb_callee); + ebb_global_enable(); + + FAIL_IF(ebb_event_enable(&event)); + + mtspr(SPRN_MMCR0, MMCR0_FC); + mtspr(SPRN_PMC1, pmc_sample_period(sample_period)); + + /* Don't need to actually take any EBBs */ + + pid = fork(); + if (pid == 0) + exit(child()); + + /* Child does the actual testing */ + FAIL_IF(wait_for_child(pid)); + + /* After fork */ + event_close(&event); + + return 0; +} + +int main(void) +{ + return test_harness(fork_cleanup, "fork_cleanup"); +} diff --git a/tools/testing/selftests/powerpc/pmu/ebb/instruction_count_test.c b/tools/testing/selftests/powerpc/pmu/ebb/instruction_count_test.c new file mode 100644 index 00000000000..f8190fa2959 --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/ebb/instruction_count_test.c @@ -0,0 +1,164 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#define _GNU_SOURCE + +#include <stdio.h> +#include <stdbool.h> +#include <string.h> +#include <sys/prctl.h> + +#include "ebb.h" + + +/* + * Run a calibrated instruction loop and count instructions executed using + * EBBs. Make sure the counts look right. + */ + +extern void thirty_two_instruction_loop(uint64_t loops); + +static bool counters_frozen = true; + +static int do_count_loop(struct event *event, uint64_t instructions, + uint64_t overhead, bool report) +{ + int64_t difference, expected; + double percentage; + + clear_ebb_stats(); + + counters_frozen = false; + mb(); + mtspr(SPRN_MMCR0, mfspr(SPRN_MMCR0) & ~MMCR0_FC); + + thirty_two_instruction_loop(instructions >> 5); + + counters_frozen = true; + mb(); + mtspr(SPRN_MMCR0, mfspr(SPRN_MMCR0) | MMCR0_FC); + + count_pmc(4, sample_period); + + event->result.value = ebb_state.stats.pmc_count[4-1]; + expected = instructions + overhead; + difference = event->result.value - expected; + percentage = (double)difference / event->result.value * 100; + + if (report) { + printf("Looped for %lu instructions, overhead %lu\n", instructions, overhead); + printf("Expected %lu\n", expected); + printf("Actual %llu\n", event->result.value); + printf("Error %ld, %f%%\n", difference, percentage); + printf("Took %d EBBs\n", ebb_state.stats.ebb_count); + } + + if (difference < 0) + difference = -difference; + + /* Tolerate a difference of up to 0.0001 % */ + difference *= 10000 * 100; + if (difference / event->result.value) + return -1; + + return 0; +} + +/* Count how many instructions it takes to do a null loop */ +static uint64_t determine_overhead(struct event *event) +{ + uint64_t current, overhead; + int i; + + do_count_loop(event, 0, 0, false); + overhead = event->result.value; + + for (i = 0; i < 100; i++) { + do_count_loop(event, 0, 0, false); + current = event->result.value; + if (current < overhead) { + printf("Replacing overhead %lu with %lu\n", overhead, current); + overhead = current; + } + } + + return overhead; +} + +static void pmc4_ebb_callee(void) +{ + uint64_t val; + + val = mfspr(SPRN_BESCR); + if (!(val & BESCR_PMEO)) { + ebb_state.stats.spurious++; + goto out; + } + + ebb_state.stats.ebb_count++; + count_pmc(4, sample_period); +out: + if (counters_frozen) + reset_ebb_with_clear_mask(MMCR0_PMAO); + else + reset_ebb(); +} + +int instruction_count(void) +{ + struct event event; + uint64_t overhead; + + event_init_named(&event, 0x400FA, "PM_RUN_INST_CMPL"); + event_leader_ebb_init(&event); + event.attr.exclude_kernel = 1; + event.attr.exclude_hv = 1; + event.attr.exclude_idle = 1; + + FAIL_IF(event_open(&event)); + FAIL_IF(ebb_event_enable(&event)); + + sample_period = COUNTER_OVERFLOW; + + setup_ebb_handler(pmc4_ebb_callee); + mtspr(SPRN_MMCR0, mfspr(SPRN_MMCR0) & ~MMCR0_FC); + ebb_global_enable(); + + overhead = determine_overhead(&event); + printf("Overhead of null loop: %lu instructions\n", overhead); + + /* Run for 1M instructions */ + FAIL_IF(do_count_loop(&event, 0x100000, overhead, true)); + + /* Run for 10M instructions */ + FAIL_IF(do_count_loop(&event, 0xa00000, overhead, true)); + + /* Run for 100M instructions */ + FAIL_IF(do_count_loop(&event, 0x6400000, overhead, true)); + + /* Run for 1G instructions */ + FAIL_IF(do_count_loop(&event, 0x40000000, overhead, true)); + + /* Run for 16G instructions */ + FAIL_IF(do_count_loop(&event, 0x400000000, overhead, true)); + + /* Run for 64G instructions */ + FAIL_IF(do_count_loop(&event, 0x1000000000, overhead, true)); + + /* Run for 128G instructions */ + FAIL_IF(do_count_loop(&event, 0x2000000000, overhead, true)); + + ebb_global_disable(); + event_close(&event); + + printf("Finished OK\n"); + + return 0; +} + +int main(void) +{ + return test_harness(instruction_count, "instruction_count"); +} diff --git a/tools/testing/selftests/powerpc/pmu/ebb/lost_exception_test.c b/tools/testing/selftests/powerpc/pmu/ebb/lost_exception_test.c new file mode 100644 index 00000000000..0c9dd9b2e39 --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/ebb/lost_exception_test.c @@ -0,0 +1,100 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#include <sched.h> +#include <signal.h> +#include <stdio.h> +#include <stdlib.h> +#include <sys/mman.h> + +#include "ebb.h" + + +/* + * Test that tries to trigger CPU_FTR_PMAO_BUG. Which is a hardware defect + * where an exception triggers but we context switch before it is delivered and + * lose the exception. + */ + +static int test_body(void) +{ + int i, orig_period, max_period; + struct event event; + + /* We use PMC4 to make sure the kernel switches all counters correctly */ + event_init_named(&event, 0x40002, "instructions"); + event_leader_ebb_init(&event); + + event.attr.exclude_kernel = 1; + event.attr.exclude_hv = 1; + event.attr.exclude_idle = 1; + + FAIL_IF(event_open(&event)); + + ebb_enable_pmc_counting(4); + setup_ebb_handler(standard_ebb_callee); + ebb_global_enable(); + FAIL_IF(ebb_event_enable(&event)); + + /* + * We want a low sample period, but we also want to get out of the EBB + * handler without tripping up again. + * + * This value picked after much experimentation. + */ + orig_period = max_period = sample_period = 400; + + mtspr(SPRN_PMC4, pmc_sample_period(sample_period)); + + while (ebb_state.stats.ebb_count < 1000000) { + /* + * We are trying to get the EBB exception to race exactly with + * us entering the kernel to do the syscall. We then need the + * kernel to decide our timeslice is up and context switch to + * the other thread. When we come back our EBB will have been + * lost and we'll spin in this while loop forever. + */ + + for (i = 0; i < 100000; i++) + sched_yield(); + + /* Change the sample period slightly to try and hit the race */ + if (sample_period >= (orig_period + 200)) + sample_period = orig_period; + else + sample_period++; + + if (sample_period > max_period) + max_period = sample_period; + } + + ebb_freeze_pmcs(); + ebb_global_disable(); + + count_pmc(4, sample_period); + mtspr(SPRN_PMC4, 0xdead); + + dump_summary_ebb_state(); + dump_ebb_hw_state(); + + event_close(&event); + + FAIL_IF(ebb_state.stats.ebb_count == 0); + + /* We vary our sample period so we need extra fudge here */ + FAIL_IF(!ebb_check_count(4, orig_period, 2 * (max_period - orig_period))); + + return 0; +} + +static int lost_exception(void) +{ + return eat_cpu(test_body); +} + +int main(void) +{ + return test_harness(lost_exception, "lost_exception"); +} diff --git a/tools/testing/selftests/powerpc/pmu/ebb/multi_counter_test.c b/tools/testing/selftests/powerpc/pmu/ebb/multi_counter_test.c new file mode 100644 index 00000000000..67d78af3284 --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/ebb/multi_counter_test.c @@ -0,0 +1,91 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#include <stdio.h> +#include <stdlib.h> +#include <sys/ioctl.h> + +#include "ebb.h" + + +/* + * Test counting multiple events using EBBs. + */ +int multi_counter(void) +{ + struct event events[6]; + int i, group_fd; + + event_init_named(&events[0], 0x1001C, "PM_CMPLU_STALL_THRD"); + event_init_named(&events[1], 0x2D016, "PM_CMPLU_STALL_FXU"); + event_init_named(&events[2], 0x30006, "PM_CMPLU_STALL_OTHER_CMPL"); + event_init_named(&events[3], 0x4000A, "PM_CMPLU_STALL"); + event_init_named(&events[4], 0x600f4, "PM_RUN_CYC"); + event_init_named(&events[5], 0x500fa, "PM_RUN_INST_CMPL"); + + event_leader_ebb_init(&events[0]); + for (i = 1; i < 6; i++) + event_ebb_init(&events[i]); + + group_fd = -1; + for (i = 0; i < 6; i++) { + events[i].attr.exclude_kernel = 1; + events[i].attr.exclude_hv = 1; + events[i].attr.exclude_idle = 1; + + FAIL_IF(event_open_with_group(&events[i], group_fd)); + if (group_fd == -1) + group_fd = events[0].fd; + } + + ebb_enable_pmc_counting(1); + ebb_enable_pmc_counting(2); + ebb_enable_pmc_counting(3); + ebb_enable_pmc_counting(4); + ebb_enable_pmc_counting(5); + ebb_enable_pmc_counting(6); + setup_ebb_handler(standard_ebb_callee); + + FAIL_IF(ioctl(events[0].fd, PERF_EVENT_IOC_ENABLE, PERF_IOC_FLAG_GROUP)); + FAIL_IF(event_read(&events[0])); + + ebb_global_enable(); + + mtspr(SPRN_PMC1, pmc_sample_period(sample_period)); + mtspr(SPRN_PMC2, pmc_sample_period(sample_period)); + mtspr(SPRN_PMC3, pmc_sample_period(sample_period)); + mtspr(SPRN_PMC4, pmc_sample_period(sample_period)); + mtspr(SPRN_PMC5, pmc_sample_period(sample_period)); + mtspr(SPRN_PMC6, pmc_sample_period(sample_period)); + + while (ebb_state.stats.ebb_count < 50) { + FAIL_IF(core_busy_loop()); + FAIL_IF(ebb_check_mmcr0()); + } + + ebb_global_disable(); + ebb_freeze_pmcs(); + + count_pmc(1, sample_period); + count_pmc(2, sample_period); + count_pmc(3, sample_period); + count_pmc(4, sample_period); + count_pmc(5, sample_period); + count_pmc(6, sample_period); + + dump_ebb_state(); + + for (i = 0; i < 6; i++) + event_close(&events[i]); + + FAIL_IF(ebb_state.stats.ebb_count == 0); + + return 0; +} + +int main(void) +{ + return test_harness(multi_counter, "multi_counter"); +} diff --git a/tools/testing/selftests/powerpc/pmu/ebb/multi_ebb_procs_test.c b/tools/testing/selftests/powerpc/pmu/ebb/multi_ebb_procs_test.c new file mode 100644 index 00000000000..b8dc371f933 --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/ebb/multi_ebb_procs_test.c @@ -0,0 +1,109 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#include <stdbool.h> +#include <stdio.h> +#include <stdlib.h> +#include <signal.h> + +#include "ebb.h" + + +/* + * Test running multiple EBB using processes at once on a single CPU. They + * should all run happily without interfering with each other. + */ + +static bool child_should_exit; + +static void sigint_handler(int signal) +{ + child_should_exit = true; +} + +struct sigaction sigint_action = { + .sa_handler = sigint_handler, +}; + +static int cycles_child(void) +{ + struct event event; + + if (sigaction(SIGINT, &sigint_action, NULL)) { + perror("sigaction"); + return 1; + } + + event_init_named(&event, 0x1001e, "cycles"); + event_leader_ebb_init(&event); + + event.attr.exclude_kernel = 1; + event.attr.exclude_hv = 1; + event.attr.exclude_idle = 1; + + FAIL_IF(event_open(&event)); + + ebb_enable_pmc_counting(1); + setup_ebb_handler(standard_ebb_callee); + ebb_global_enable(); + + FAIL_IF(ebb_event_enable(&event)); + + mtspr(SPRN_PMC1, pmc_sample_period(sample_period)); + + while (!child_should_exit) { + FAIL_IF(core_busy_loop()); + FAIL_IF(ebb_check_mmcr0()); + } + + ebb_global_disable(); + ebb_freeze_pmcs(); + + count_pmc(1, sample_period); + + dump_summary_ebb_state(); + + event_close(&event); + + FAIL_IF(ebb_state.stats.ebb_count == 0); + + return 0; +} + +#define NR_CHILDREN 4 + +int multi_ebb_procs(void) +{ + pid_t pids[NR_CHILDREN]; + int cpu, rc, i; + + cpu = pick_online_cpu(); + FAIL_IF(cpu < 0); + FAIL_IF(bind_to_cpu(cpu)); + + for (i = 0; i < NR_CHILDREN; i++) { + pids[i] = fork(); + if (pids[i] == 0) + exit(cycles_child()); + } + + /* Have them all run for "a while" */ + sleep(10); + + rc = 0; + for (i = 0; i < NR_CHILDREN; i++) { + /* Tell them to stop */ + kill(pids[i], SIGINT); + /* And wait */ + rc |= wait_for_child(pids[i]); + } + + return rc; +} + +int main(void) +{ + return test_harness(multi_ebb_procs, "multi_ebb_procs"); +} diff --git a/tools/testing/selftests/powerpc/pmu/ebb/no_handler_test.c b/tools/testing/selftests/powerpc/pmu/ebb/no_handler_test.c new file mode 100644 index 00000000000..2f9bf8edfa6 --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/ebb/no_handler_test.c @@ -0,0 +1,61 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#include <stdio.h> +#include <stdlib.h> +#include <setjmp.h> +#include <signal.h> + +#include "ebb.h" + + +/* Test that things work sanely if we have no handler */ + +static int no_handler_test(void) +{ + struct event event; + u64 val; + int i; + + event_init_named(&event, 0x1001e, "cycles"); + event_leader_ebb_init(&event); + + event.attr.exclude_kernel = 1; + event.attr.exclude_hv = 1; + event.attr.exclude_idle = 1; + + FAIL_IF(event_open(&event)); + FAIL_IF(ebb_event_enable(&event)); + + val = mfspr(SPRN_EBBHR); + FAIL_IF(val != 0); + + /* Make sure it overflows quickly */ + sample_period = 1000; + mtspr(SPRN_PMC1, pmc_sample_period(sample_period)); + + /* Spin to make sure the event has time to overflow */ + for (i = 0; i < 1000; i++) + mb(); + + dump_ebb_state(); + + /* We expect to see the PMU frozen & PMAO set */ + val = mfspr(SPRN_MMCR0); + FAIL_IF(val != 0x0000000080000080); + + event_close(&event); + + dump_ebb_state(); + + /* The real test is that we never took an EBB at 0x0 */ + + return 0; +} + +int main(void) +{ + return test_harness(no_handler_test,"no_handler_test"); +} diff --git a/tools/testing/selftests/powerpc/pmu/ebb/pmae_handling_test.c b/tools/testing/selftests/powerpc/pmu/ebb/pmae_handling_test.c new file mode 100644 index 00000000000..986500fd213 --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/ebb/pmae_handling_test.c @@ -0,0 +1,106 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#include <sched.h> +#include <signal.h> +#include <stdbool.h> +#include <stdio.h> +#include <stdlib.h> + +#include "ebb.h" + + +/* + * Test that the kernel properly handles PMAE across context switches. + * + * We test this by calling into the kernel inside our EBB handler, where PMAE + * is clear. A cpu eater companion thread is running on the same CPU as us to + * encourage the scheduler to switch us. + * + * The kernel must make sure that when it context switches us back in, it + * honours the fact that we had PMAE clear. + * + * Observed to hit the failing case on the first EBB with a broken kernel. + */ + +static bool mmcr0_mismatch; +static uint64_t before, after; + +static void syscall_ebb_callee(void) +{ + uint64_t val; + + val = mfspr(SPRN_BESCR); + if (!(val & BESCR_PMEO)) { + ebb_state.stats.spurious++; + goto out; + } + + ebb_state.stats.ebb_count++; + count_pmc(1, sample_period); + + before = mfspr(SPRN_MMCR0); + + /* Try and get ourselves scheduled, to force a PMU context switch */ + sched_yield(); + + after = mfspr(SPRN_MMCR0); + if (before != after) + mmcr0_mismatch = true; + +out: + reset_ebb(); +} + +static int test_body(void) +{ + struct event event; + + event_init_named(&event, 0x1001e, "cycles"); + event_leader_ebb_init(&event); + + event.attr.exclude_kernel = 1; + event.attr.exclude_hv = 1; + event.attr.exclude_idle = 1; + + FAIL_IF(event_open(&event)); + + setup_ebb_handler(syscall_ebb_callee); + ebb_global_enable(); + + FAIL_IF(ebb_event_enable(&event)); + + mtspr(SPRN_PMC1, pmc_sample_period(sample_period)); + + while (ebb_state.stats.ebb_count < 20 && !mmcr0_mismatch) + FAIL_IF(core_busy_loop()); + + ebb_global_disable(); + ebb_freeze_pmcs(); + + count_pmc(1, sample_period); + + dump_ebb_state(); + + if (mmcr0_mismatch) + printf("Saw MMCR0 before 0x%lx after 0x%lx\n", before, after); + + event_close(&event); + + FAIL_IF(ebb_state.stats.ebb_count == 0); + FAIL_IF(mmcr0_mismatch); + + return 0; +} + +int pmae_handling(void) +{ + return eat_cpu(test_body); +} + +int main(void) +{ + return test_harness(pmae_handling, "pmae_handling"); +} diff --git a/tools/testing/selftests/powerpc/pmu/ebb/pmc56_overflow_test.c b/tools/testing/selftests/powerpc/pmu/ebb/pmc56_overflow_test.c new file mode 100644 index 00000000000..a503fa70c95 --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/ebb/pmc56_overflow_test.c @@ -0,0 +1,93 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#include <stdio.h> +#include <stdlib.h> + +#include "ebb.h" + + +/* + * Test that PMC5 & 6 are frozen (ie. don't overflow) when they are not being + * used. Tests the MMCR0_FC56 logic in the kernel. + */ + +static int pmc56_overflowed; + +static void ebb_callee(void) +{ + uint64_t val; + + val = mfspr(SPRN_BESCR); + if (!(val & BESCR_PMEO)) { + ebb_state.stats.spurious++; + goto out; + } + + ebb_state.stats.ebb_count++; + count_pmc(2, sample_period); + + val = mfspr(SPRN_PMC5); + if (val >= COUNTER_OVERFLOW) + pmc56_overflowed++; + + count_pmc(5, COUNTER_OVERFLOW); + + val = mfspr(SPRN_PMC6); + if (val >= COUNTER_OVERFLOW) + pmc56_overflowed++; + + count_pmc(6, COUNTER_OVERFLOW); + +out: + reset_ebb(); +} + +int pmc56_overflow(void) +{ + struct event event; + + /* Use PMC2 so we set PMCjCE, which enables PMC5/6 */ + event_init(&event, 0x2001e); + event_leader_ebb_init(&event); + + event.attr.exclude_kernel = 1; + event.attr.exclude_hv = 1; + event.attr.exclude_idle = 1; + + FAIL_IF(event_open(&event)); + + setup_ebb_handler(ebb_callee); + ebb_global_enable(); + + FAIL_IF(ebb_event_enable(&event)); + + mtspr(SPRN_PMC1, pmc_sample_period(sample_period)); + mtspr(SPRN_PMC5, 0); + mtspr(SPRN_PMC6, 0); + + while (ebb_state.stats.ebb_count < 10) + FAIL_IF(core_busy_loop()); + + ebb_global_disable(); + ebb_freeze_pmcs(); + + count_pmc(2, sample_period); + + dump_ebb_state(); + + printf("PMC5/6 overflow %d\n", pmc56_overflowed); + + event_close(&event); + + FAIL_IF(ebb_state.stats.ebb_count == 0 || pmc56_overflowed != 0); + + return 0; +} + +int main(void) +{ + return test_harness(pmc56_overflow, "pmc56_overflow"); +} diff --git a/tools/testing/selftests/powerpc/pmu/ebb/reg.h b/tools/testing/selftests/powerpc/pmu/ebb/reg.h new file mode 100644 index 00000000000..5921b0dfe2e --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/ebb/reg.h @@ -0,0 +1,49 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#ifndef _SELFTESTS_POWERPC_REG_H +#define _SELFTESTS_POWERPC_REG_H + +#define __stringify_1(x) #x +#define __stringify(x) __stringify_1(x) + +#define mfspr(rn) ({unsigned long rval; \ + asm volatile("mfspr %0," __stringify(rn) \ + : "=r" (rval)); rval; }) +#define mtspr(rn, v) asm volatile("mtspr " __stringify(rn) ",%0" : \ + : "r" ((unsigned long)(v)) \ + : "memory") + +#define mb() asm volatile("sync" : : : "memory"); + +#define SPRN_MMCR2 769 +#define SPRN_MMCRA 770 +#define SPRN_MMCR0 779 +#define MMCR0_PMAO 0x00000080 +#define MMCR0_PMAE 0x04000000 +#define MMCR0_FC 0x80000000 +#define SPRN_EBBHR 804 +#define SPRN_EBBRR 805 +#define SPRN_BESCR 806 /* Branch event status & control register */ +#define SPRN_BESCRS 800 /* Branch event status & control set (1 bits set to 1) */ +#define SPRN_BESCRSU 801 /* Branch event status & control set upper */ +#define SPRN_BESCRR 802 /* Branch event status & control REset (1 bits set to 0) */ +#define SPRN_BESCRRU 803 /* Branch event status & control REset upper */ + +#define BESCR_PMEO 0x1 /* PMU Event-based exception Occurred */ +#define BESCR_PME (0x1ul << 32) /* PMU Event-based exception Enable */ + +#define SPRN_PMC1 771 +#define SPRN_PMC2 772 +#define SPRN_PMC3 773 +#define SPRN_PMC4 774 +#define SPRN_PMC5 775 +#define SPRN_PMC6 776 + +#define SPRN_SIAR 780 +#define SPRN_SDAR 781 +#define SPRN_SIER 768 + +#endif /* _SELFTESTS_POWERPC_REG_H */ diff --git a/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test.c b/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test.c new file mode 100644 index 00000000000..0cae66f659a --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test.c @@ -0,0 +1,39 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#include <stdio.h> +#include <stdlib.h> + +#include "ebb.h" +#include "reg.h" + + +/* + * Test basic access to the EBB regs, they should be user accessible with no + * kernel interaction required. + */ +int reg_access(void) +{ + uint64_t val, expected; + + expected = 0x8000000100000000ull; + mtspr(SPRN_BESCR, expected); + val = mfspr(SPRN_BESCR); + + FAIL_IF(val != expected); + + expected = 0x0000000001000000ull; + mtspr(SPRN_EBBHR, expected); + val = mfspr(SPRN_EBBHR); + + FAIL_IF(val != expected); + + return 0; +} + +int main(void) +{ + return test_harness(reg_access, "reg_access"); +} diff --git a/tools/testing/selftests/powerpc/pmu/ebb/task_event_pinned_vs_ebb_test.c b/tools/testing/selftests/powerpc/pmu/ebb/task_event_pinned_vs_ebb_test.c new file mode 100644 index 00000000000..d56607e4ffa --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/ebb/task_event_pinned_vs_ebb_test.c @@ -0,0 +1,91 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#include <signal.h> +#include <stdio.h> +#include <stdlib.h> +#include <stdbool.h> +#include <sys/types.h> +#include <sys/wait.h> +#include <unistd.h> + +#include "ebb.h" + + +/* + * Tests a pinned per-task event vs an EBB - in that order. The pinned per-task + * event should prevent the EBB event from being enabled. + */ + +static int setup_child_event(struct event *event, pid_t child_pid) +{ + event_init_named(event, 0x400FA, "PM_RUN_INST_CMPL"); + + event->attr.pinned = 1; + + event->attr.exclude_kernel = 1; + event->attr.exclude_hv = 1; + event->attr.exclude_idle = 1; + + FAIL_IF(event_open_with_pid(event, child_pid)); + FAIL_IF(event_enable(event)); + + return 0; +} + +int task_event_pinned_vs_ebb(void) +{ + union pipe read_pipe, write_pipe; + struct event event; + pid_t pid; + int rc; + + FAIL_IF(pipe(read_pipe.fds) == -1); + FAIL_IF(pipe(write_pipe.fds) == -1); + + pid = fork(); + if (pid == 0) { + /* NB order of pipes looks reversed */ + exit(ebb_child(write_pipe, read_pipe)); + } + + /* We setup the task event first */ + rc = setup_child_event(&event, pid); + if (rc) { + kill_child_and_wait(pid); + return rc; + } + + /* Signal the child to install its EBB event and wait */ + if (sync_with_child(read_pipe, write_pipe)) + /* If it fails, wait for it to exit */ + goto wait; + + /* Signal the child to run */ + FAIL_IF(sync_with_child(read_pipe, write_pipe)); + +wait: + /* We expect it to fail to read the event */ + FAIL_IF(wait_for_child(pid) != 2); + FAIL_IF(event_disable(&event)); + FAIL_IF(event_read(&event)); + + event_report(&event); + + FAIL_IF(event.result.value == 0); + /* + * For reasons I don't understand enabled is usually just slightly + * lower than running. Would be good to confirm why. + */ + FAIL_IF(event.result.enabled == 0); + FAIL_IF(event.result.running == 0); + + return 0; +} + +int main(void) +{ + return test_harness(task_event_pinned_vs_ebb, "task_event_pinned_vs_ebb"); +} diff --git a/tools/testing/selftests/powerpc/pmu/ebb/task_event_vs_ebb_test.c b/tools/testing/selftests/powerpc/pmu/ebb/task_event_vs_ebb_test.c new file mode 100644 index 00000000000..eba32196dbb --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/ebb/task_event_vs_ebb_test.c @@ -0,0 +1,83 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#include <signal.h> +#include <stdio.h> +#include <stdlib.h> +#include <stdbool.h> +#include <sys/types.h> +#include <sys/wait.h> +#include <unistd.h> + +#include "ebb.h" + + +/* + * Tests a per-task event vs an EBB - in that order. The EBB should push the + * per-task event off the PMU. + */ + +static int setup_child_event(struct event *event, pid_t child_pid) +{ + event_init_named(event, 0x400FA, "PM_RUN_INST_CMPL"); + + event->attr.exclude_kernel = 1; + event->attr.exclude_hv = 1; + event->attr.exclude_idle = 1; + + FAIL_IF(event_open_with_pid(event, child_pid)); + FAIL_IF(event_enable(event)); + + return 0; +} + +int task_event_vs_ebb(void) +{ + union pipe read_pipe, write_pipe; + struct event event; + pid_t pid; + int rc; + + FAIL_IF(pipe(read_pipe.fds) == -1); + FAIL_IF(pipe(write_pipe.fds) == -1); + + pid = fork(); + if (pid == 0) { + /* NB order of pipes looks reversed */ + exit(ebb_child(write_pipe, read_pipe)); + } + + /* We setup the task event first */ + rc = setup_child_event(&event, pid); + if (rc) { + kill_child_and_wait(pid); + return rc; + } + + /* Signal the child to install its EBB event and wait */ + if (sync_with_child(read_pipe, write_pipe)) + /* If it fails, wait for it to exit */ + goto wait; + + /* Signal the child to run */ + FAIL_IF(sync_with_child(read_pipe, write_pipe)); + +wait: + /* The EBB event should push the task event off so the child should succeed */ + FAIL_IF(wait_for_child(pid)); + FAIL_IF(event_disable(&event)); + FAIL_IF(event_read(&event)); + + event_report(&event); + + /* The task event may have run, or not so we can't assert anything about it */ + + return 0; +} + +int main(void) +{ + return test_harness(task_event_vs_ebb, "task_event_vs_ebb"); +} diff --git a/tools/testing/selftests/powerpc/pmu/ebb/trace.c b/tools/testing/selftests/powerpc/pmu/ebb/trace.c new file mode 100644 index 00000000000..251e66ab2aa --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/ebb/trace.c @@ -0,0 +1,300 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#include <errno.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <sys/mman.h> + +#include "trace.h" + + +struct trace_buffer *trace_buffer_allocate(u64 size) +{ + struct trace_buffer *tb; + + if (size < sizeof(*tb)) { + fprintf(stderr, "Error: trace buffer too small\n"); + return NULL; + } + + tb = mmap(NULL, size, PROT_READ | PROT_WRITE, + MAP_ANONYMOUS | MAP_PRIVATE, -1, 0); + if (tb == MAP_FAILED) { + perror("mmap"); + return NULL; + } + + tb->size = size; + tb->tail = tb->data; + tb->overflow = false; + + return tb; +} + +static bool trace_check_bounds(struct trace_buffer *tb, void *p) +{ + return p < ((void *)tb + tb->size); +} + +static bool trace_check_alloc(struct trace_buffer *tb, void *p) +{ + /* + * If we ever overflowed don't allow any more input. This prevents us + * from dropping a large item and then later logging a small one. The + * buffer should just stop when overflow happened, not be patchy. If + * you're overflowing, make your buffer bigger. + */ + if (tb->overflow) + return false; + + if (!trace_check_bounds(tb, p)) { + tb->overflow = true; + return false; + } + + return true; +} + +static void *trace_alloc(struct trace_buffer *tb, int bytes) +{ + void *p, *newtail; + + p = tb->tail; + newtail = tb->tail + bytes; + if (!trace_check_alloc(tb, newtail)) + return NULL; + + tb->tail = newtail; + + return p; +} + +static struct trace_entry *trace_alloc_entry(struct trace_buffer *tb, int payload_size) +{ + struct trace_entry *e; + + e = trace_alloc(tb, sizeof(*e) + payload_size); + if (e) + e->length = payload_size; + + return e; +} + +int trace_log_reg(struct trace_buffer *tb, u64 reg, u64 value) +{ + struct trace_entry *e; + u64 *p; + + e = trace_alloc_entry(tb, sizeof(reg) + sizeof(value)); + if (!e) + return -ENOSPC; + + e->type = TRACE_TYPE_REG; + p = (u64 *)e->data; + *p++ = reg; + *p++ = value; + + return 0; +} + +int trace_log_counter(struct trace_buffer *tb, u64 value) +{ + struct trace_entry *e; + u64 *p; + + e = trace_alloc_entry(tb, sizeof(value)); + if (!e) + return -ENOSPC; + + e->type = TRACE_TYPE_COUNTER; + p = (u64 *)e->data; + *p++ = value; + + return 0; +} + +int trace_log_string(struct trace_buffer *tb, char *str) +{ + struct trace_entry *e; + char *p; + int len; + + len = strlen(str); + + /* We NULL terminate to make printing easier */ + e = trace_alloc_entry(tb, len + 1); + if (!e) + return -ENOSPC; + + e->type = TRACE_TYPE_STRING; + p = (char *)e->data; + memcpy(p, str, len); + p += len; + *p = '\0'; + + return 0; +} + +int trace_log_indent(struct trace_buffer *tb) +{ + struct trace_entry *e; + + e = trace_alloc_entry(tb, 0); + if (!e) + return -ENOSPC; + + e->type = TRACE_TYPE_INDENT; + + return 0; +} + +int trace_log_outdent(struct trace_buffer *tb) +{ + struct trace_entry *e; + + e = trace_alloc_entry(tb, 0); + if (!e) + return -ENOSPC; + + e->type = TRACE_TYPE_OUTDENT; + + return 0; +} + +static void trace_print_header(int seq, int prefix) +{ + printf("%*s[%d]: ", prefix, "", seq); +} + +static char *trace_decode_reg(int reg) +{ + switch (reg) { + case 769: return "SPRN_MMCR2"; break; + case 770: return "SPRN_MMCRA"; break; + case 779: return "SPRN_MMCR0"; break; + case 804: return "SPRN_EBBHR"; break; + case 805: return "SPRN_EBBRR"; break; + case 806: return "SPRN_BESCR"; break; + case 800: return "SPRN_BESCRS"; break; + case 801: return "SPRN_BESCRSU"; break; + case 802: return "SPRN_BESCRR"; break; + case 803: return "SPRN_BESCRRU"; break; + case 771: return "SPRN_PMC1"; break; + case 772: return "SPRN_PMC2"; break; + case 773: return "SPRN_PMC3"; break; + case 774: return "SPRN_PMC4"; break; + case 775: return "SPRN_PMC5"; break; + case 776: return "SPRN_PMC6"; break; + case 780: return "SPRN_SIAR"; break; + case 781: return "SPRN_SDAR"; break; + case 768: return "SPRN_SIER"; break; + } + + return NULL; +} + +static void trace_print_reg(struct trace_entry *e) +{ + u64 *p, *reg, *value; + char *name; + + p = (u64 *)e->data; + reg = p++; + value = p; + + name = trace_decode_reg(*reg); + if (name) + printf("register %-10s = 0x%016llx\n", name, *value); + else + printf("register %lld = 0x%016llx\n", *reg, *value); +} + +static void trace_print_counter(struct trace_entry *e) +{ + u64 *value; + + value = (u64 *)e->data; + printf("counter = %lld\n", *value); +} + +static void trace_print_string(struct trace_entry *e) +{ + char *str; + + str = (char *)e->data; + puts(str); +} + +#define BASE_PREFIX 2 +#define PREFIX_DELTA 8 + +static void trace_print_entry(struct trace_entry *e, int seq, int *prefix) +{ + switch (e->type) { + case TRACE_TYPE_REG: + trace_print_header(seq, *prefix); + trace_print_reg(e); + break; + case TRACE_TYPE_COUNTER: + trace_print_header(seq, *prefix); + trace_print_counter(e); + break; + case TRACE_TYPE_STRING: + trace_print_header(seq, *prefix); + trace_print_string(e); + break; + case TRACE_TYPE_INDENT: + trace_print_header(seq, *prefix); + puts("{"); + *prefix += PREFIX_DELTA; + break; + case TRACE_TYPE_OUTDENT: + *prefix -= PREFIX_DELTA; + if (*prefix < BASE_PREFIX) + *prefix = BASE_PREFIX; + trace_print_header(seq, *prefix); + puts("}"); + break; + default: + trace_print_header(seq, *prefix); + printf("entry @ %p type %d\n", e, e->type); + break; + } +} + +void trace_buffer_print(struct trace_buffer *tb) +{ + struct trace_entry *e; + int i, prefix; + void *p; + + printf("Trace buffer dump:\n"); + printf(" address %p \n", tb); + printf(" tail %p\n", tb->tail); + printf(" size %llu\n", tb->size); + printf(" overflow %s\n", tb->overflow ? "TRUE" : "false"); + printf(" Content:\n"); + + p = tb->data; + + i = 0; + prefix = BASE_PREFIX; + + while (trace_check_bounds(tb, p) && p < tb->tail) { + e = p; + + trace_print_entry(e, i, &prefix); + + i++; + p = (void *)e + sizeof(*e) + e->length; + } +} + +void trace_print_location(struct trace_buffer *tb) +{ + printf("Trace buffer 0x%llx bytes @ %p\n", tb->size, tb); +} diff --git a/tools/testing/selftests/powerpc/pmu/ebb/trace.h b/tools/testing/selftests/powerpc/pmu/ebb/trace.h new file mode 100644 index 00000000000..926458e28c8 --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/ebb/trace.h @@ -0,0 +1,41 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#ifndef _SELFTESTS_POWERPC_PMU_EBB_TRACE_H +#define _SELFTESTS_POWERPC_PMU_EBB_TRACE_H + +#include "utils.h" + +#define TRACE_TYPE_REG 1 +#define TRACE_TYPE_COUNTER 2 +#define TRACE_TYPE_STRING 3 +#define TRACE_TYPE_INDENT 4 +#define TRACE_TYPE_OUTDENT 5 + +struct trace_entry +{ + u8 type; + u8 length; + u8 data[0]; +}; + +struct trace_buffer +{ + u64 size; + bool overflow; + void *tail; + u8 data[0]; +}; + +struct trace_buffer *trace_buffer_allocate(u64 size); +int trace_log_reg(struct trace_buffer *tb, u64 reg, u64 value); +int trace_log_counter(struct trace_buffer *tb, u64 value); +int trace_log_string(struct trace_buffer *tb, char *str); +int trace_log_indent(struct trace_buffer *tb); +int trace_log_outdent(struct trace_buffer *tb); +void trace_buffer_print(struct trace_buffer *tb); +void trace_print_location(struct trace_buffer *tb); + +#endif /* _SELFTESTS_POWERPC_PMU_EBB_TRACE_H */ diff --git a/tools/testing/selftests/powerpc/pmu/event.c b/tools/testing/selftests/powerpc/pmu/event.c new file mode 100644 index 00000000000..184b36807d4 --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/event.c @@ -0,0 +1,131 @@ +/* + * Copyright 2013, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#define _GNU_SOURCE +#include <unistd.h> +#include <sys/syscall.h> +#include <string.h> +#include <stdio.h> +#include <sys/ioctl.h> + +#include "event.h" + + +int perf_event_open(struct perf_event_attr *attr, pid_t pid, int cpu, + int group_fd, unsigned long flags) +{ + return syscall(__NR_perf_event_open, attr, pid, cpu, + group_fd, flags); +} + +void event_init_opts(struct event *e, u64 config, int type, char *name) +{ + memset(e, 0, sizeof(*e)); + + e->name = name; + + e->attr.type = type; + e->attr.config = config; + e->attr.size = sizeof(e->attr); + /* This has to match the structure layout in the header */ + e->attr.read_format = PERF_FORMAT_TOTAL_TIME_ENABLED | \ + PERF_FORMAT_TOTAL_TIME_RUNNING; +} + +void event_init_named(struct event *e, u64 config, char *name) +{ + event_init_opts(e, config, PERF_TYPE_RAW, name); +} + +void event_init(struct event *e, u64 config) +{ + event_init_opts(e, config, PERF_TYPE_RAW, "event"); +} + +#define PERF_CURRENT_PID 0 +#define PERF_NO_PID -1 +#define PERF_NO_CPU -1 +#define PERF_NO_GROUP -1 + +int event_open_with_options(struct event *e, pid_t pid, int cpu, int group_fd) +{ + e->fd = perf_event_open(&e->attr, pid, cpu, group_fd, 0); + if (e->fd == -1) { + perror("perf_event_open"); + return -1; + } + + return 0; +} + +int event_open_with_group(struct event *e, int group_fd) +{ + return event_open_with_options(e, PERF_CURRENT_PID, PERF_NO_CPU, group_fd); +} + +int event_open_with_pid(struct event *e, pid_t pid) +{ + return event_open_with_options(e, pid, PERF_NO_CPU, PERF_NO_GROUP); +} + +int event_open_with_cpu(struct event *e, int cpu) +{ + return event_open_with_options(e, PERF_NO_PID, cpu, PERF_NO_GROUP); +} + +int event_open(struct event *e) +{ + return event_open_with_options(e, PERF_CURRENT_PID, PERF_NO_CPU, PERF_NO_GROUP); +} + +void event_close(struct event *e) +{ + close(e->fd); +} + +int event_enable(struct event *e) +{ + return ioctl(e->fd, PERF_EVENT_IOC_ENABLE); +} + +int event_disable(struct event *e) +{ + return ioctl(e->fd, PERF_EVENT_IOC_DISABLE); +} + +int event_reset(struct event *e) +{ + return ioctl(e->fd, PERF_EVENT_IOC_RESET); +} + +int event_read(struct event *e) +{ + int rc; + + rc = read(e->fd, &e->result, sizeof(e->result)); + if (rc != sizeof(e->result)) { + fprintf(stderr, "read error on event %p!\n", e); + return -1; + } + + return 0; +} + +void event_report_justified(struct event *e, int name_width, int result_width) +{ + printf("%*s: result %*llu ", name_width, e->name, result_width, + e->result.value); + + if (e->result.running == e->result.enabled) + printf("running/enabled %llu\n", e->result.running); + else + printf("running %llu enabled %llu\n", e->result.running, + e->result.enabled); +} + +void event_report(struct event *e) +{ + event_report_justified(e, 0, 0); +} diff --git a/tools/testing/selftests/powerpc/pmu/event.h b/tools/testing/selftests/powerpc/pmu/event.h new file mode 100644 index 00000000000..a0ea6b1eef7 --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/event.h @@ -0,0 +1,43 @@ +/* + * Copyright 2013, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#ifndef _SELFTESTS_POWERPC_PMU_EVENT_H +#define _SELFTESTS_POWERPC_PMU_EVENT_H + +#include <unistd.h> +#include <linux/perf_event.h> + +#include "utils.h" + + +struct event { + struct perf_event_attr attr; + char *name; + int fd; + /* This must match the read_format we use */ + struct { + u64 value; + u64 running; + u64 enabled; + } result; +}; + +void event_init(struct event *e, u64 config); +void event_init_named(struct event *e, u64 config, char *name); +void event_init_opts(struct event *e, u64 config, int type, char *name); +int event_open_with_options(struct event *e, pid_t pid, int cpu, int group_fd); +int event_open_with_group(struct event *e, int group_fd); +int event_open_with_pid(struct event *e, pid_t pid); +int event_open_with_cpu(struct event *e, int cpu); +int event_open(struct event *e); +void event_close(struct event *e); +int event_enable(struct event *e); +int event_disable(struct event *e); +int event_reset(struct event *e); +int event_read(struct event *e); +void event_report_justified(struct event *e, int name_width, int result_width); +void event_report(struct event *e); + +#endif /* _SELFTESTS_POWERPC_PMU_EVENT_H */ diff --git a/tools/testing/selftests/powerpc/pmu/lib.c b/tools/testing/selftests/powerpc/pmu/lib.c new file mode 100644 index 00000000000..0f6a4731d54 --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/lib.c @@ -0,0 +1,252 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#define _GNU_SOURCE /* For CPU_ZERO etc. */ + +#include <errno.h> +#include <sched.h> +#include <setjmp.h> +#include <stdlib.h> +#include <sys/wait.h> + +#include "utils.h" +#include "lib.h" + + +int pick_online_cpu(void) +{ + cpu_set_t mask; + int cpu; + + CPU_ZERO(&mask); + + if (sched_getaffinity(0, sizeof(mask), &mask)) { + perror("sched_getaffinity"); + return -1; + } + + /* We prefer a primary thread, but skip 0 */ + for (cpu = 8; cpu < CPU_SETSIZE; cpu += 8) + if (CPU_ISSET(cpu, &mask)) + return cpu; + + /* Search for anything, but in reverse */ + for (cpu = CPU_SETSIZE - 1; cpu >= 0; cpu--) + if (CPU_ISSET(cpu, &mask)) + return cpu; + + printf("No cpus in affinity mask?!\n"); + return -1; +} + +int bind_to_cpu(int cpu) +{ + cpu_set_t mask; + + printf("Binding to cpu %d\n", cpu); + + CPU_ZERO(&mask); + CPU_SET(cpu, &mask); + + return sched_setaffinity(0, sizeof(mask), &mask); +} + +#define PARENT_TOKEN 0xAA +#define CHILD_TOKEN 0x55 + +int sync_with_child(union pipe read_pipe, union pipe write_pipe) +{ + char c = PARENT_TOKEN; + + FAIL_IF(write(write_pipe.write_fd, &c, 1) != 1); + FAIL_IF(read(read_pipe.read_fd, &c, 1) != 1); + if (c != CHILD_TOKEN) /* sometimes expected */ + return 1; + + return 0; +} + +int wait_for_parent(union pipe read_pipe) +{ + char c; + + FAIL_IF(read(read_pipe.read_fd, &c, 1) != 1); + FAIL_IF(c != PARENT_TOKEN); + + return 0; +} + +int notify_parent(union pipe write_pipe) +{ + char c = CHILD_TOKEN; + + FAIL_IF(write(write_pipe.write_fd, &c, 1) != 1); + + return 0; +} + +int notify_parent_of_error(union pipe write_pipe) +{ + char c = ~CHILD_TOKEN; + + FAIL_IF(write(write_pipe.write_fd, &c, 1) != 1); + + return 0; +} + +int wait_for_child(pid_t child_pid) +{ + int rc; + + if (waitpid(child_pid, &rc, 0) == -1) { + perror("waitpid"); + return 1; + } + + if (WIFEXITED(rc)) + rc = WEXITSTATUS(rc); + else + rc = 1; /* Signal or other */ + + return rc; +} + +int kill_child_and_wait(pid_t child_pid) +{ + kill(child_pid, SIGTERM); + + return wait_for_child(child_pid); +} + +static int eat_cpu_child(union pipe read_pipe, union pipe write_pipe) +{ + volatile int i = 0; + + /* + * We are just here to eat cpu and die. So make sure we can be killed, + * and also don't do any custom SIGTERM handling. + */ + signal(SIGTERM, SIG_DFL); + + notify_parent(write_pipe); + wait_for_parent(read_pipe); + + /* Soak up cpu forever */ + while (1) i++; + + return 0; +} + +pid_t eat_cpu(int (test_function)(void)) +{ + union pipe read_pipe, write_pipe; + int cpu, rc; + pid_t pid; + + cpu = pick_online_cpu(); + FAIL_IF(cpu < 0); + FAIL_IF(bind_to_cpu(cpu)); + + if (pipe(read_pipe.fds) == -1) + return -1; + + if (pipe(write_pipe.fds) == -1) + return -1; + + pid = fork(); + if (pid == 0) + exit(eat_cpu_child(write_pipe, read_pipe)); + + if (sync_with_child(read_pipe, write_pipe)) { + rc = -1; + goto out; + } + + printf("main test running as pid %d\n", getpid()); + + rc = test_function(); +out: + kill(pid, SIGKILL); + + return rc; +} + +struct addr_range libc, vdso; + +int parse_proc_maps(void) +{ + char execute, name[128]; + uint64_t start, end; + FILE *f; + int rc; + + f = fopen("/proc/self/maps", "r"); + if (!f) { + perror("fopen"); + return -1; + } + + do { + /* This skips line with no executable which is what we want */ + rc = fscanf(f, "%lx-%lx %*c%*c%c%*c %*x %*d:%*d %*d %127s\n", + &start, &end, &execute, name); + if (rc <= 0) + break; + + if (execute != 'x') + continue; + + if (strstr(name, "libc")) { + libc.first = start; + libc.last = end - 1; + } else if (strstr(name, "[vdso]")) { + vdso.first = start; + vdso.last = end - 1; + } + } while(1); + + fclose(f); + + return 0; +} + +#define PARANOID_PATH "/proc/sys/kernel/perf_event_paranoid" + +bool require_paranoia_below(int level) +{ + unsigned long current; + char *end, buf[16]; + FILE *f; + int rc; + + rc = -1; + + f = fopen(PARANOID_PATH, "r"); + if (!f) { + perror("fopen"); + goto out; + } + + if (!fgets(buf, sizeof(buf), f)) { + printf("Couldn't read " PARANOID_PATH "?\n"); + goto out_close; + } + + current = strtoul(buf, &end, 10); + + if (end == buf) { + printf("Couldn't parse " PARANOID_PATH "?\n"); + goto out_close; + } + + if (current >= level) + goto out; + + rc = 0; +out_close: + fclose(f); +out: + return rc; +} diff --git a/tools/testing/selftests/powerpc/pmu/lib.h b/tools/testing/selftests/powerpc/pmu/lib.h new file mode 100644 index 00000000000..ca5d72ae3be --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/lib.h @@ -0,0 +1,41 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#ifndef __SELFTESTS_POWERPC_PMU_LIB_H +#define __SELFTESTS_POWERPC_PMU_LIB_H + +#include <stdio.h> +#include <stdint.h> +#include <string.h> +#include <unistd.h> + +union pipe { + struct { + int read_fd; + int write_fd; + }; + int fds[2]; +}; + +extern int pick_online_cpu(void); +extern int bind_to_cpu(int cpu); +extern int kill_child_and_wait(pid_t child_pid); +extern int wait_for_child(pid_t child_pid); +extern int sync_with_child(union pipe read_pipe, union pipe write_pipe); +extern int wait_for_parent(union pipe read_pipe); +extern int notify_parent(union pipe write_pipe); +extern int notify_parent_of_error(union pipe write_pipe); +extern pid_t eat_cpu(int (test_function)(void)); +extern bool require_paranoia_below(int level); + +struct addr_range { + uint64_t first, last; +}; + +extern struct addr_range libc, vdso; + +int parse_proc_maps(void); + +#endif /* __SELFTESTS_POWERPC_PMU_LIB_H */ diff --git a/tools/testing/selftests/powerpc/pmu/loop.S b/tools/testing/selftests/powerpc/pmu/loop.S new file mode 100644 index 00000000000..20c1f0876c4 --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/loop.S @@ -0,0 +1,43 @@ +/* + * Copyright 2013, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#include <ppc-asm.h> + + .text + +FUNC_START(thirty_two_instruction_loop) + cmpdi r3,0 + beqlr + addi r4,r3,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 + addi r4,r4,1 # 28 addi's + subi r3,r3,1 + b FUNC_NAME(thirty_two_instruction_loop) +FUNC_END(thirty_two_instruction_loop) diff --git a/tools/testing/selftests/powerpc/subunit.h b/tools/testing/selftests/powerpc/subunit.h new file mode 100644 index 00000000000..9c6c4e901ab --- /dev/null +++ b/tools/testing/selftests/powerpc/subunit.h @@ -0,0 +1,52 @@ +/* + * Copyright 2013, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#ifndef _SELFTESTS_POWERPC_SUBUNIT_H +#define _SELFTESTS_POWERPC_SUBUNIT_H + +static inline void test_start(char *name) +{ + printf("test: %s\n", name); +} + +static inline void test_failure_detail(char *name, char *detail) +{ + printf("failure: %s [%s]\n", name, detail); +} + +static inline void test_failure(char *name) +{ + printf("failure: %s\n", name); +} + +static inline void test_error(char *name) +{ + printf("error: %s\n", name); +} + +static inline void test_skip(char *name) +{ + printf("skip: %s\n", name); +} + +static inline void test_success(char *name) +{ + printf("success: %s\n", name); +} + +static inline void test_finish(char *name, int status) +{ + if (status) + test_failure(name); + else + test_success(name); +} + +static inline void test_set_git_version(char *value) +{ + printf("tags: git_version:%s\n", value); +} + +#endif /* _SELFTESTS_POWERPC_SUBUNIT_H */ diff --git a/tools/testing/selftests/powerpc/tm/Makefile b/tools/testing/selftests/powerpc/tm/Makefile new file mode 100644 index 00000000000..2cede239a07 --- /dev/null +++ b/tools/testing/selftests/powerpc/tm/Makefile @@ -0,0 +1,15 @@ +PROGS := tm-resched-dscr + +all: $(PROGS) + +$(PROGS): ../harness.c + +run_tests: all + @-for PROG in $(PROGS); do \ + ./$$PROG; \ + done; + +clean: + rm -f $(PROGS) *.o + +.PHONY: all run_tests clean diff --git a/tools/testing/selftests/powerpc/tm/tm-resched-dscr.c b/tools/testing/selftests/powerpc/tm/tm-resched-dscr.c new file mode 100644 index 00000000000..42d4c8caad8 --- /dev/null +++ b/tools/testing/selftests/powerpc/tm/tm-resched-dscr.c @@ -0,0 +1,98 @@ +/* Test context switching to see if the DSCR SPR is correctly preserved + * when within a transaction. + * + * Note: We assume that the DSCR has been left at the default value (0) + * for all CPUs. + * + * Method: + * + * Set a value into the DSCR. + * + * Start a transaction, and suspend it (*). + * + * Hard loop checking to see if the transaction has become doomed. + * + * Now that we *may* have been preempted, record the DSCR and TEXASR SPRS. + * + * If the abort was because of a context switch, check the DSCR value. + * Otherwise, try again. + * + * (*) If the transaction is not suspended we can't see the problem because + * the transaction abort handler will restore the DSCR to it's checkpointed + * value before we regain control. + */ + +#include <inttypes.h> +#include <stdio.h> +#include <stdlib.h> +#include <assert.h> +#include <asm/tm.h> + +#include "utils.h" + +#define TBEGIN ".long 0x7C00051D ;" +#define TEND ".long 0x7C00055D ;" +#define TCHECK ".long 0x7C00059C ;" +#define TSUSPEND ".long 0x7C0005DD ;" +#define TRESUME ".long 0x7C2005DD ;" +#define SPRN_TEXASR 0x82 +#define SPRN_DSCR 0x03 + +int test_body(void) +{ + uint64_t rv, dscr1 = 1, dscr2, texasr; + + printf("Check DSCR TM context switch: "); + fflush(stdout); + for (;;) { + rv = 1; + asm __volatile__ ( + /* set a known value into the DSCR */ + "ld 3, %[dscr1];" + "mtspr %[sprn_dscr], 3;" + + /* start and suspend a transaction */ + TBEGIN + "beq 1f;" + TSUSPEND + + /* hard loop until the transaction becomes doomed */ + "2: ;" + TCHECK + "bc 4, 0, 2b;" + + /* record DSCR and TEXASR */ + "mfspr 3, %[sprn_dscr];" + "std 3, %[dscr2];" + "mfspr 3, %[sprn_texasr];" + "std 3, %[texasr];" + + TRESUME + TEND + "li %[rv], 0;" + "1: ;" + : [rv]"=r"(rv), [dscr2]"=m"(dscr2), [texasr]"=m"(texasr) + : [dscr1]"m"(dscr1) + , [sprn_dscr]"i"(SPRN_DSCR), [sprn_texasr]"i"(SPRN_TEXASR) + : "memory", "r3" + ); + assert(rv); /* make sure the transaction aborted */ + if ((texasr >> 56) != TM_CAUSE_RESCHED) { + putchar('.'); + fflush(stdout); + continue; + } + if (dscr2 != dscr1) { + printf(" FAIL\n"); + return 1; + } else { + printf(" OK\n"); + return 0; + } + } +} + +int main(void) +{ + return test_harness(test_body, "tm_resched_dscr"); +} diff --git a/tools/testing/selftests/powerpc/utils.h b/tools/testing/selftests/powerpc/utils.h new file mode 100644 index 00000000000..a93777ae068 --- /dev/null +++ b/tools/testing/selftests/powerpc/utils.h @@ -0,0 +1,49 @@ +/* + * Copyright 2013, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#ifndef _SELFTESTS_POWERPC_UTILS_H +#define _SELFTESTS_POWERPC_UTILS_H + +#include <stdint.h> +#include <stdbool.h> + +/* Avoid headaches with PRI?64 - just use %ll? always */ +typedef unsigned long long u64; +typedef signed long long s64; + +/* Just for familiarity */ +typedef uint32_t u32; +typedef uint8_t u8; + + +int test_harness(int (test_function)(void), char *name); + + +/* Yes, this is evil */ +#define FAIL_IF(x) \ +do { \ + if ((x)) { \ + fprintf(stderr, \ + "[FAIL] Test FAILED on line %d\n", __LINE__); \ + return 1; \ + } \ +} while (0) + +/* The test harness uses this, yes it's gross */ +#define MAGIC_SKIP_RETURN_VALUE 99 + +#define SKIP_IF(x) \ +do { \ + if ((x)) { \ + fprintf(stderr, \ + "[SKIP] Test skipped on line %d\n", __LINE__); \ + return MAGIC_SKIP_RETURN_VALUE; \ + } \ +} while (0) + +#define _str(s) #s +#define str(s) _str(s) + +#endif /* _SELFTESTS_POWERPC_UTILS_H */ diff --git a/tools/testing/selftests/ptrace/Makefile b/tools/testing/selftests/ptrace/Makefile new file mode 100644 index 00000000000..47ae2d385ce --- /dev/null +++ b/tools/testing/selftests/ptrace/Makefile @@ -0,0 +1,10 @@ +CFLAGS += -iquote../../../../include/uapi -Wall +peeksiginfo: peeksiginfo.c + +all: peeksiginfo + +clean: + rm -f peeksiginfo + +run_tests: all + @./peeksiginfo || echo "peeksiginfo selftests: [FAIL]" diff --git a/tools/testing/selftests/ptrace/peeksiginfo.c b/tools/testing/selftests/ptrace/peeksiginfo.c new file mode 100644 index 00000000000..d46558b1f58 --- /dev/null +++ b/tools/testing/selftests/ptrace/peeksiginfo.c @@ -0,0 +1,214 @@ +#define _GNU_SOURCE +#include <stdio.h> +#include <signal.h> +#include <unistd.h> +#include <errno.h> +#include <linux/types.h> +#include <sys/wait.h> +#include <sys/syscall.h> +#include <sys/user.h> +#include <sys/mman.h> + +#include "linux/ptrace.h" + +static int sys_rt_sigqueueinfo(pid_t tgid, int sig, siginfo_t *uinfo) +{ + return syscall(SYS_rt_sigqueueinfo, tgid, sig, uinfo); +} + +static int sys_rt_tgsigqueueinfo(pid_t tgid, pid_t tid, + int sig, siginfo_t *uinfo) +{ + return syscall(SYS_rt_tgsigqueueinfo, tgid, tid, sig, uinfo); +} + +static int sys_ptrace(int request, pid_t pid, void *addr, void *data) +{ + return syscall(SYS_ptrace, request, pid, addr, data); +} + +#define SIGNR 10 +#define TEST_SICODE_PRIV -1 +#define TEST_SICODE_SHARE -2 + +#define err(fmt, ...) \ + fprintf(stderr, \ + "Error (%s:%d): " fmt, \ + __FILE__, __LINE__, ##__VA_ARGS__) + +static int check_error_paths(pid_t child) +{ + struct ptrace_peeksiginfo_args arg; + int ret, exit_code = -1; + void *addr_rw, *addr_ro; + + /* + * Allocate two contiguous pages. The first one is for read-write, + * another is for read-only. + */ + addr_rw = mmap(NULL, 2 * PAGE_SIZE, PROT_READ | PROT_WRITE, + MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); + if (addr_rw == MAP_FAILED) { + err("mmap() failed: %m\n"); + return 1; + } + + addr_ro = mmap(addr_rw + PAGE_SIZE, PAGE_SIZE, PROT_READ, + MAP_PRIVATE | MAP_ANONYMOUS | MAP_FIXED, -1, 0); + if (addr_ro == MAP_FAILED) { + err("mmap() failed: %m\n"); + goto out; + } + + arg.nr = SIGNR; + arg.off = 0; + + /* Unsupported flags */ + arg.flags = ~0; + ret = sys_ptrace(PTRACE_PEEKSIGINFO, child, &arg, addr_rw); + if (ret != -1 || errno != EINVAL) { + err("sys_ptrace() returns %d (expected -1)," + " errno %d (expected %d): %m\n", + ret, errno, EINVAL); + goto out; + } + arg.flags = 0; + + /* A part of the buffer is read-only */ + ret = sys_ptrace(PTRACE_PEEKSIGINFO, child, &arg, + addr_ro - sizeof(siginfo_t) * 2); + if (ret != 2) { + err("sys_ptrace() returns %d (expected 2): %m\n", ret); + goto out; + } + + /* Read-only buffer */ + ret = sys_ptrace(PTRACE_PEEKSIGINFO, child, &arg, addr_ro); + if (ret != -1 && errno != EFAULT) { + err("sys_ptrace() returns %d (expected -1)," + " errno %d (expected %d): %m\n", + ret, errno, EFAULT); + goto out; + } + + exit_code = 0; +out: + munmap(addr_rw, 2 * PAGE_SIZE); + return exit_code; +} + +int check_direct_path(pid_t child, int shared, int nr) +{ + struct ptrace_peeksiginfo_args arg = {.flags = 0, .nr = nr, .off = 0}; + int i, j, ret, exit_code = -1; + siginfo_t siginfo[SIGNR]; + int si_code; + + if (shared == 1) { + arg.flags = PTRACE_PEEKSIGINFO_SHARED; + si_code = TEST_SICODE_SHARE; + } else { + arg.flags = 0; + si_code = TEST_SICODE_PRIV; + } + + for (i = 0; i < SIGNR; ) { + arg.off = i; + ret = sys_ptrace(PTRACE_PEEKSIGINFO, child, &arg, siginfo); + if (ret == -1) { + err("ptrace() failed: %m\n"); + goto out; + } + + if (ret == 0) + break; + + for (j = 0; j < ret; j++, i++) { + if (siginfo[j].si_code == si_code && + siginfo[j].si_int == i) + continue; + + err("%d: Wrong siginfo i=%d si_code=%d si_int=%d\n", + shared, i, siginfo[j].si_code, siginfo[j].si_int); + goto out; + } + } + + if (i != SIGNR) { + err("Only %d signals were read\n", i); + goto out; + } + + exit_code = 0; +out: + return exit_code; +} + +int main(int argc, char *argv[]) +{ + siginfo_t siginfo[SIGNR]; + int i, exit_code = 1; + sigset_t blockmask; + pid_t child; + + sigemptyset(&blockmask); + sigaddset(&blockmask, SIGRTMIN); + sigprocmask(SIG_BLOCK, &blockmask, NULL); + + child = fork(); + if (child == -1) { + err("fork() failed: %m"); + return 1; + } else if (child == 0) { + pid_t ppid = getppid(); + while (1) { + if (ppid != getppid()) + break; + sleep(1); + } + return 1; + } + + /* Send signals in process-wide and per-thread queues */ + for (i = 0; i < SIGNR; i++) { + siginfo->si_code = TEST_SICODE_SHARE; + siginfo->si_int = i; + sys_rt_sigqueueinfo(child, SIGRTMIN, siginfo); + + siginfo->si_code = TEST_SICODE_PRIV; + siginfo->si_int = i; + sys_rt_tgsigqueueinfo(child, child, SIGRTMIN, siginfo); + } + + if (sys_ptrace(PTRACE_ATTACH, child, NULL, NULL) == -1) + return 1; + + waitpid(child, NULL, 0); + + /* Dump signals one by one*/ + if (check_direct_path(child, 0, 1)) + goto out; + /* Dump all signals for one call */ + if (check_direct_path(child, 0, SIGNR)) + goto out; + + /* + * Dump signal from the process-wide queue. + * The number of signals is not multible to the buffer size + */ + if (check_direct_path(child, 1, 3)) + goto out; + + if (check_error_paths(child)) + goto out; + + printf("PASS\n"); + exit_code = 0; +out: + if (sys_ptrace(PTRACE_KILL, child, NULL, NULL) == -1) + return 1; + + waitpid(child, NULL, 0); + + return exit_code; +} diff --git a/tools/testing/selftests/rcutorture/.gitignore b/tools/testing/selftests/rcutorture/.gitignore new file mode 100644 index 00000000000..05838f6f2eb --- /dev/null +++ b/tools/testing/selftests/rcutorture/.gitignore @@ -0,0 +1,6 @@ +initrd +linux-2.6 +b[0-9]* +rcu-test-image +res +*.swp diff --git a/tools/testing/selftests/rcutorture/bin/config2frag.sh b/tools/testing/selftests/rcutorture/bin/config2frag.sh new file mode 100644 index 00000000000..9f9ffcd427d --- /dev/null +++ b/tools/testing/selftests/rcutorture/bin/config2frag.sh @@ -0,0 +1,25 @@ +#!/bin/sh +# Usage: sh config2frag.sh < .config > configfrag +# +# Converts the "# CONFIG_XXX is not set" to "CONFIG_XXX=n" so that the +# resulting file becomes a legitimate Kconfig fragment. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, you can access it online at +# http://www.gnu.org/licenses/gpl-2.0.html. +# +# Copyright (C) IBM Corporation, 2013 +# +# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> + +LANG=C sed -e 's/^# CONFIG_\([a-zA-Z0-9_]*\) is not set$/CONFIG_\1=n/' diff --git a/tools/testing/selftests/rcutorture/bin/configNR_CPUS.sh b/tools/testing/selftests/rcutorture/bin/configNR_CPUS.sh new file mode 100755 index 00000000000..43540f1828c --- /dev/null +++ b/tools/testing/selftests/rcutorture/bin/configNR_CPUS.sh @@ -0,0 +1,45 @@ +#!/bin/bash +# +# Extract the number of CPUs expected from the specified Kconfig-file +# fragment by checking CONFIG_SMP and CONFIG_NR_CPUS. If the specified +# file gives no clue, base the number on the number of idle CPUs on +# the system. +# +# Usage: configNR_CPUS.sh config-frag +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, you can access it online at +# http://www.gnu.org/licenses/gpl-2.0.html. +# +# Copyright (C) IBM Corporation, 2013 +# +# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> + +cf=$1 +if test ! -r $cf +then + echo Unreadable config fragment $cf 1>&2 + exit -1 +fi +if grep -q '^CONFIG_SMP=n$' $cf +then + echo 1 + exit 0 +fi +if grep -q '^CONFIG_NR_CPUS=' $cf +then + grep '^CONFIG_NR_CPUS=' $cf | + sed -e 's/^CONFIG_NR_CPUS=\([0-9]*\).*$/\1/' + exit 0 +fi +cpus2use.sh diff --git a/tools/testing/selftests/rcutorture/bin/configcheck.sh b/tools/testing/selftests/rcutorture/bin/configcheck.sh new file mode 100755 index 00000000000..d686537dd55 --- /dev/null +++ b/tools/testing/selftests/rcutorture/bin/configcheck.sh @@ -0,0 +1,54 @@ +#!/bin/sh +# Usage: sh configcheck.sh .config .config-template +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, you can access it online at +# http://www.gnu.org/licenses/gpl-2.0.html. +# +# Copyright (C) IBM Corporation, 2011 +# +# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> + +T=/tmp/abat-chk-config.sh.$$ +trap 'rm -rf $T' 0 +mkdir $T + +cat $1 > $T/.config + +cat $2 | sed -e 's/\(.*\)=n/# \1 is not set/' -e 's/^#CHECK#//' | +awk ' +BEGIN { + print "if grep -q \"" $0 "\" < '"$T/.config"'"; + print "then"; + print "\t:"; + print "else"; + if ($1 == "#") { + print "\tif grep -q \"" $2 "\" < '"$T/.config"'"; + print "\tthen"; + print "\t\tif test \"$firsttime\" = \"\"" + print "\t\tthen" + print "\t\t\tfirsttime=1" + print "\t\tfi" + print "\t\techo \":" $2 ": improperly set\""; + print "\telse"; + print "\t\t:"; + print "\tfi"; + } else { + print "\tif test \"$firsttime\" = \"\"" + print "\tthen" + print "\t\tfirsttime=1" + print "\tfi" + print "\techo \":" $0 ": improperly set\""; + } + print "fi"; + }' | sh diff --git a/tools/testing/selftests/rcutorture/bin/configinit.sh b/tools/testing/selftests/rcutorture/bin/configinit.sh new file mode 100755 index 00000000000..9c3f3d39b93 --- /dev/null +++ b/tools/testing/selftests/rcutorture/bin/configinit.sh @@ -0,0 +1,74 @@ +#!/bin/sh +# +# sh configinit.sh config-spec-file [ build output dir ] +# +# Create a .config file from the spec file. Run from the kernel source tree. +# Exits with 0 if all went well, with 1 if all went well but the config +# did not match, and some other number for other failures. +# +# The first argument is the .config specification file, which contains +# desired settings, for example, "CONFIG_NO_HZ=y". For best results, +# this should be a full pathname. +# +# The second argument is a optional path to a build output directory, +# for example, "O=/tmp/foo". If this argument is omitted, the .config +# file will be generated directly in the current directory. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, you can access it online at +# http://www.gnu.org/licenses/gpl-2.0.html. +# +# Copyright (C) IBM Corporation, 2013 +# +# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> + +T=/tmp/configinit.sh.$$ +trap 'rm -rf $T' 0 +mkdir $T + +# Capture config spec file. + +c=$1 +buildloc=$2 +builddir= +if test -n $buildloc +then + if echo $buildloc | grep -q '^O=' + then + builddir=`echo $buildloc | sed -e 's/^O=//'` + if test ! -d $builddir + then + mkdir $builddir + fi + else + echo Bad build directory: \"$builddir\" + exit 2 + fi +fi + +sed -e 's/^\(CONFIG[0-9A-Z_]*\)=.*$/grep -v "^# \1" |/' < $c > $T/u.sh +sed -e 's/^\(CONFIG[0-9A-Z_]*=\).*$/grep -v \1 |/' < $c >> $T/u.sh +grep '^grep' < $T/u.sh > $T/upd.sh +echo "cat - $c" >> $T/upd.sh +make mrproper +make $buildloc distclean > $builddir/Make.distclean 2>&1 +make $buildloc $TORTURE_DEFCONFIG > $builddir/Make.defconfig.out 2>&1 +mv $builddir/.config $builddir/.config.sav +sh $T/upd.sh < $builddir/.config.sav > $builddir/.config +cp $builddir/.config $builddir/.config.new +yes '' | make $buildloc oldconfig > $builddir/Make.modconfig.out 2>&1 + +# verify new config matches specification. +configcheck.sh $builddir/.config $c + +exit 0 diff --git a/tools/testing/selftests/rcutorture/bin/cpus2use.sh b/tools/testing/selftests/rcutorture/bin/cpus2use.sh new file mode 100755 index 00000000000..abe14b7f36e --- /dev/null +++ b/tools/testing/selftests/rcutorture/bin/cpus2use.sh @@ -0,0 +1,41 @@ +#!/bin/bash +# +# Get an estimate of how CPU-hoggy to be. +# +# Usage: cpus2use.sh +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, you can access it online at +# http://www.gnu.org/licenses/gpl-2.0.html. +# +# Copyright (C) IBM Corporation, 2013 +# +# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> + +ncpus=`grep '^processor' /proc/cpuinfo | wc -l` +idlecpus=`mpstat | tail -1 | \ + awk -v ncpus=$ncpus '{ print ncpus * ($7 + $12) / 100 }'` +awk -v ncpus=$ncpus -v idlecpus=$idlecpus < /dev/null ' +BEGIN { + cpus2use = idlecpus; + if (cpus2use < 1) + cpus2use = 1; + if (cpus2use < ncpus / 10) + cpus2use = ncpus / 10; + if (cpus2use == int(cpus2use)) + cpus2use = int(cpus2use) + else + cpus2use = int(cpus2use) + 1 + print cpus2use; +}' + diff --git a/tools/testing/selftests/rcutorture/bin/functions.sh b/tools/testing/selftests/rcutorture/bin/functions.sh new file mode 100644 index 00000000000..d01b865bb10 --- /dev/null +++ b/tools/testing/selftests/rcutorture/bin/functions.sh @@ -0,0 +1,223 @@ +#!/bin/bash +# +# Shell functions for the rest of the scripts. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, you can access it online at +# http://www.gnu.org/licenses/gpl-2.0.html. +# +# Copyright (C) IBM Corporation, 2013 +# +# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> + +# bootparam_hotplug_cpu bootparam-string +# +# Returns 1 if the specified boot-parameter string tells rcutorture to +# test CPU-hotplug operations. +bootparam_hotplug_cpu () { + echo "$1" | grep -q "rcutorture\.onoff_" +} + +# checkarg --argname argtype $# arg mustmatch cannotmatch +# +# Checks the specified argument "arg" against the mustmatch and cannotmatch +# patterns. +checkarg () { + if test $3 -le 1 + then + echo $1 needs argument $2 matching \"$5\" + usage + fi + if echo "$4" | grep -q -e "$5" + then + : + else + echo $1 $2 \"$4\" must match \"$5\" + usage + fi + if echo "$4" | grep -q -e "$6" + then + echo $1 $2 \"$4\" must not match \"$6\" + usage + fi +} + +# configfrag_boot_params bootparam-string config-fragment-file +# +# Adds boot parameters from the .boot file, if any. +configfrag_boot_params () { + if test -r "$2.boot" + then + echo $1 `grep -v '^#' "$2.boot" | tr '\012' ' '` + else + echo $1 + fi +} + +# configfrag_hotplug_cpu config-fragment-file +# +# Returns 1 if the config fragment specifies hotplug CPU. +configfrag_hotplug_cpu () { + if test ! -r "$1" + then + echo Unreadable config fragment "$1" 1>&2 + exit -1 + fi + grep -q '^CONFIG_HOTPLUG_CPU=y$' "$1" +} + +# identify_boot_image qemu-cmd +# +# Returns the relative path to the kernel build image. This will be +# arch/<arch>/boot/bzImage unless overridden with the TORTURE_BOOT_IMAGE +# environment variable. +identify_boot_image () { + if test -n "$TORTURE_BOOT_IMAGE" + then + echo $TORTURE_BOOT_IMAGE + else + case "$1" in + qemu-system-x86_64|qemu-system-i386) + echo arch/x86/boot/bzImage + ;; + qemu-system-ppc64) + echo arch/powerpc/boot/bzImage + ;; + *) + echo "" + ;; + esac + fi +} + +# identify_qemu builddir +# +# Returns our best guess as to which qemu command is appropriate for +# the kernel at hand. Override with the TORTURE_QEMU_CMD environment variable. +identify_qemu () { + local u="`file "$1"`" + if test -n "$TORTURE_QEMU_CMD" + then + echo $TORTURE_QEMU_CMD + elif echo $u | grep -q x86-64 + then + echo qemu-system-x86_64 + elif echo $u | grep -q "Intel 80386" + then + echo qemu-system-i386 + elif uname -a | grep -q ppc64 + then + echo qemu-system-ppc64 + else + echo Cannot figure out what qemu command to use! 1>&2 + echo file $1 output: $u + # Usually this will be one of /usr/bin/qemu-system-* + # Use TORTURE_QEMU_CMD environment variable or appropriate + # argument to top-level script. + exit 1 + fi +} + +# identify_qemu_append qemu-cmd +# +# Output arguments for the qemu "-append" string based on CPU type +# and the TORTURE_QEMU_INTERACTIVE environment variable. +identify_qemu_append () { + case "$1" in + qemu-system-x86_64|qemu-system-i386) + echo noapic selinux=0 initcall_debug debug + ;; + esac + if test -n "$TORTURE_QEMU_INTERACTIVE" + then + echo root=/dev/sda + else + echo console=ttyS0 + fi +} + +# identify_qemu_args qemu-cmd serial-file +# +# Output arguments for qemu arguments based on the TORTURE_QEMU_MAC +# and TORTURE_QEMU_INTERACTIVE environment variables. +identify_qemu_args () { + case "$1" in + qemu-system-x86_64|qemu-system-i386) + ;; + qemu-system-ppc64) + echo -enable-kvm -M pseries -cpu POWER7 -nodefaults + echo -device spapr-vscsi + if test -n "$TORTURE_QEMU_INTERACTIVE" -a -n "$TORTURE_QEMU_MAC" + then + echo -device spapr-vlan,netdev=net0,mac=$TORTURE_QEMU_MAC + echo -netdev bridge,br=br0,id=net0 + elif test -n "$TORTURE_QEMU_INTERACTIVE" + then + echo -net nic -net user + fi + ;; + esac + if test -n "$TORTURE_QEMU_INTERACTIVE" + then + echo -monitor stdio -serial pty -S + else + echo -serial file:$2 + fi +} + +# identify_qemu_vcpus +# +# Returns the number of virtual CPUs available to the aggregate of the +# guest OSes. +identify_qemu_vcpus () { + lscpu | grep '^CPU(s):' | sed -e 's/CPU(s)://' +} + +# print_bug +# +# Prints "BUG: " in red followed by remaining arguments +print_bug () { + printf '\033[031mBUG: \033[m' + echo $* +} + +# print_warning +# +# Prints "WARNING: " in yellow followed by remaining arguments +print_warning () { + printf '\033[033mWARNING: \033[m' + echo $* +} + +# specify_qemu_cpus qemu-cmd qemu-args #cpus +# +# Appends a string containing "-smp XXX" to qemu-args, unless the incoming +# qemu-args already contains "-smp". +specify_qemu_cpus () { + local nt; + + if echo $2 | grep -q -e -smp + then + echo $2 + else + case "$1" in + qemu-system-x86_64|qemu-system-i386) + echo $2 -smp $3 + ;; + qemu-system-ppc64) + nt="`lscpu | grep '^NUMA node0' | sed -e 's/^[^,]*,\([0-9]*\),.*$/\1/'`" + echo $2 -smp cores=`expr \( $3 + $nt - 1 \) / $nt`,threads=$nt + ;; + esac + fi +} diff --git a/tools/testing/selftests/rcutorture/bin/kvm-build.sh b/tools/testing/selftests/rcutorture/bin/kvm-build.sh new file mode 100755 index 00000000000..7c1e56b46de --- /dev/null +++ b/tools/testing/selftests/rcutorture/bin/kvm-build.sh @@ -0,0 +1,71 @@ +#!/bin/bash +# +# Build a kvm-ready Linux kernel from the tree in the current directory. +# +# Usage: sh kvm-build.sh config-template build-dir more-configs +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, you can access it online at +# http://www.gnu.org/licenses/gpl-2.0.html. +# +# Copyright (C) IBM Corporation, 2011 +# +# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> + +config_template=${1} +if test -z "$config_template" -o ! -f "$config_template" -o ! -r "$config_template" +then + echo "kvm-build.sh :$config_template: Not a readable file" + exit 1 +fi +builddir=${2} +if test -z "$builddir" -o ! -d "$builddir" -o ! -w "$builddir" +then + echo "kvm-build.sh :$builddir: Not a writable directory, cannot build into it" + exit 1 +fi +moreconfigs=${3} +if test -z "$moreconfigs" -o ! -r "$moreconfigs" +then + echo "kvm-build.sh :$moreconfigs: Not a readable file" + exit 1 +fi + +T=/tmp/test-linux.sh.$$ +trap 'rm -rf $T' 0 +mkdir $T + +grep -v 'CONFIG_[A-Z]*_TORTURE_TEST' < ${config_template} > $T/config +cat << ___EOF___ >> $T/config +CONFIG_INITRAMFS_SOURCE="$TORTURE_INITRD" +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_CONSOLE=y +___EOF___ +cat $moreconfigs >> $T/config + +configinit.sh $T/config O=$builddir +retval=$? +if test $retval -gt 1 +then + exit 2 +fi +ncpus=`cpus2use.sh` +make O=$builddir -j$ncpus $TORTURE_KMAKE_ARG > $builddir/Make.out 2>&1 +retval=$? +if test $retval -ne 0 || grep "rcu[^/]*": < $builddir/Make.out | egrep -q "Stop|Error|error:|warning:" || egrep -q "Stop|Error|error:" < $builddir/Make.out +then + echo Kernel build error + egrep "Stop|Error|error:|warning:" < $builddir/Make.out + echo Run aborted. + exit 3 +fi diff --git a/tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh b/tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh new file mode 100755 index 00000000000..7f1ff1a8fc4 --- /dev/null +++ b/tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh @@ -0,0 +1,51 @@ +#!/bin/bash +# +# Analyze a given results directory for locktorture progress. +# +# Usage: sh kvm-recheck-lock.sh resdir +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, you can access it online at +# http://www.gnu.org/licenses/gpl-2.0.html. +# +# Copyright (C) IBM Corporation, 2014 +# +# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> + +i="$1" +if test -d $i +then + : +else + echo Unreadable results directory: $i + exit 1 +fi + +configfile=`echo $i | sed -e 's/^.*\///'` +ncs=`grep "Writes: Total:" $i/console.log 2> /dev/null | tail -1 | sed -e 's/^.* Total: //' -e 's/ .*$//'` +if test -z "$ncs" +then + echo "$configfile -------" +else + title="$configfile ------- $ncs acquisitions/releases" + dur=`sed -e 's/^.* locktorture.shutdown_secs=//' -e 's/ .*$//' < $i/qemu-cmd 2> /dev/null` + if test -z "$dur" + then + : + else + ncsps=`awk -v ncs=$ncs -v dur=$dur ' + BEGIN { print ncs / dur }' < /dev/null` + title="$title ($ncsps per second)" + fi + echo $title +fi diff --git a/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh b/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh new file mode 100755 index 00000000000..307c4b95f32 --- /dev/null +++ b/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh @@ -0,0 +1,51 @@ +#!/bin/bash +# +# Analyze a given results directory for rcutorture progress. +# +# Usage: sh kvm-recheck-rcu.sh resdir +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, you can access it online at +# http://www.gnu.org/licenses/gpl-2.0.html. +# +# Copyright (C) IBM Corporation, 2014 +# +# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> + +i="$1" +if test -d $i +then + : +else + echo Unreadable results directory: $i + exit 1 +fi + +configfile=`echo $i | sed -e 's/^.*\///'` +ngps=`grep ver: $i/console.log 2> /dev/null | tail -1 | sed -e 's/^.* ver: //' -e 's/ .*$//'` +if test -z "$ngps" +then + echo "$configfile -------" +else + title="$configfile ------- $ngps grace periods" + dur=`sed -e 's/^.* rcutorture.shutdown_secs=//' -e 's/ .*$//' < $i/qemu-cmd 2> /dev/null` + if test -z "$dur" + then + : + else + ngpsps=`awk -v ngps=$ngps -v dur=$dur ' + BEGIN { print ngps / dur }' < /dev/null` + title="$title ($ngpsps per second)" + fi + echo $title +fi diff --git a/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh b/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh new file mode 100755 index 00000000000..ee1f6cae3d7 --- /dev/null +++ b/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh @@ -0,0 +1,63 @@ +#!/bin/bash +# +# Given the results directories for previous KVM-based torture runs, +# check the build and console output for errors. Given a directory +# containing results directories, this recursively checks them all. +# +# Usage: sh kvm-recheck.sh resdir ... +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, you can access it online at +# http://www.gnu.org/licenses/gpl-2.0.html. +# +# Copyright (C) IBM Corporation, 2011 +# +# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> + +PATH=`pwd`/tools/testing/selftests/rcutorture/bin:$PATH; export PATH +. tools/testing/selftests/rcutorture/bin/functions.sh +for rd in "$@" +do + firsttime=1 + dirs=`find $rd -name Make.defconfig.out -print | sort | sed -e 's,/[^/]*$,,' | sort -u` + for i in $dirs + do + if test -n "$firsttime" + then + firsttime="" + resdir=`echo $i | sed -e 's,/$,,' -e 's,/[^/]*$,,'` + head -1 $resdir/log + fi + TORTURE_SUITE="`cat $i/../TORTURE_SUITE`" + kvm-recheck-${TORTURE_SUITE}.sh $i + if test -f "$i/console.log" + then + configcheck.sh $i/.config $i/ConfigFragment + parse-build.sh $i/Make.out $configfile + parse-torture.sh $i/console.log $configfile + parse-console.sh $i/console.log $configfile + if test -r $i/Warnings + then + cat $i/Warnings + fi + else + if test -f "$i/qemu-cmd" + then + print_bug qemu failed + else + print_bug Build failed + fi + echo " $i" + fi + done +done diff --git a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh new file mode 100755 index 00000000000..27e544e2951 --- /dev/null +++ b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh @@ -0,0 +1,222 @@ +#!/bin/bash +# +# Run a kvm-based test of the specified tree on the specified configs. +# Fully automated run and error checking, no graphics console. +# +# Execute this in the source tree. Do not run it as a background task +# because qemu does not seem to like that much. +# +# Usage: sh kvm-test-1-run.sh config builddir resdir minutes qemu-args boot_args +# +# qemu-args defaults to "-nographic", along with arguments specifying the +# number of CPUs and other options generated from +# the underlying CPU architecture. +# boot_args defaults to value returned by the per_version_boot_params +# shell function. +# +# Anything you specify for either qemu-args or boot_args is appended to +# the default values. The "-smp" value is deduced from the contents of +# the config fragment. +# +# More sophisticated argument parsing is clearly needed. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, you can access it online at +# http://www.gnu.org/licenses/gpl-2.0.html. +# +# Copyright (C) IBM Corporation, 2011 +# +# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> + +grace=120 + +T=/tmp/kvm-test-1-run.sh.$$ +trap 'rm -rf $T' 0 + +. $KVM/bin/functions.sh +. $KVPATH/ver_functions.sh + +config_template=${1} +config_dir=`echo $config_template | sed -e 's,/[^/]*$,,'` +title=`echo $config_template | sed -e 's/^.*\///'` +builddir=${2} +if test -z "$builddir" -o ! -d "$builddir" -o ! -w "$builddir" +then + echo "kvm-test-1-run.sh :$builddir: Not a writable directory, cannot build into it" + exit 1 +fi +resdir=${3} +if test -z "$resdir" -o ! -d "$resdir" -o ! -w "$resdir" +then + echo "kvm-test-1-run.sh :$resdir: Not a writable directory, cannot store results into it" + exit 1 +fi +cp $config_template $resdir/ConfigFragment +echo ' ---' `date`: Starting build +echo ' ---' Kconfig fragment at: $config_template >> $resdir/log +if test -r "$config_dir/CFcommon" +then + cat < $config_dir/CFcommon >> $T +fi +# Optimizations below this point +# CONFIG_USB=n +# CONFIG_SECURITY=n +# CONFIG_NFS_FS=n +# CONFIG_SOUND=n +# CONFIG_INPUT_JOYSTICK=n +# CONFIG_INPUT_TABLET=n +# CONFIG_INPUT_TOUCHSCREEN=n +# CONFIG_INPUT_MISC=n +# CONFIG_INPUT_MOUSE=n +# # CONFIG_NET=n # disables console access, so accept the slower build. +# CONFIG_SCSI=n +# CONFIG_ATA=n +# CONFIG_FAT_FS=n +# CONFIG_MSDOS_FS=n +# CONFIG_VFAT_FS=n +# CONFIG_ISO9660_FS=n +# CONFIG_QUOTA=n +# CONFIG_HID=n +# CONFIG_CRYPTO=n +# CONFIG_PCCARD=n +# CONFIG_PCMCIA=n +# CONFIG_CARDBUS=n +# CONFIG_YENTA=n +if kvm-build.sh $config_template $builddir $T +then + QEMU="`identify_qemu $builddir/vmlinux`" + BOOT_IMAGE="`identify_boot_image $QEMU`" + cp $builddir/Make*.out $resdir + cp $builddir/.config $resdir + if test -n "$BOOT_IMAGE" + then + cp $builddir/$BOOT_IMAGE $resdir + else + echo No identifiable boot image, not running KVM, see $resdir. + echo Do the torture scripts know about your architecture? + fi + parse-build.sh $resdir/Make.out $title + if test -f $builddir.wait + then + mv $builddir.wait $builddir.ready + fi +else + cp $builddir/Make*.out $resdir + cp $builddir/.config $resdir || : + echo Build failed, not running KVM, see $resdir. + if test -f $builddir.wait + then + mv $builddir.wait $builddir.ready + fi + exit 1 +fi +while test -f $builddir.ready +do + sleep 1 +done +minutes=$4 +seconds=$(($minutes * 60)) +qemu_args=$5 +boot_args=$6 + +cd $KVM +kstarttime=`awk 'BEGIN { print systime() }' < /dev/null` +echo ' ---' `date`: Starting kernel + +# Generate -smp qemu argument. +qemu_args="-nographic $qemu_args" +cpu_count=`configNR_CPUS.sh $config_template` +vcpus=`identify_qemu_vcpus` +if test $cpu_count -gt $vcpus +then + echo CPU count limited from $cpu_count to $vcpus + touch $resdir/Warnings + echo CPU count limited from $cpu_count to $vcpus >> $resdir/Warnings + cpu_count=$vcpus +fi +qemu_args="`specify_qemu_cpus "$QEMU" "$qemu_args" "$cpu_count"`" + +# Generate architecture-specific and interaction-specific qemu arguments +qemu_args="$qemu_args `identify_qemu_args "$QEMU" "$builddir/console.log"`" + +# Generate qemu -append arguments +qemu_append="`identify_qemu_append "$QEMU"`" + +# Pull in Kconfig-fragment boot parameters +boot_args="`configfrag_boot_params "$boot_args" "$config_template"`" +# Generate kernel-version-specific boot parameters +boot_args="`per_version_boot_params "$boot_args" $builddir/.config $seconds`" + +echo $QEMU $qemu_args -m 512 -kernel $builddir/$BOOT_IMAGE -append \"$qemu_append $boot_args\" > $resdir/qemu-cmd +if test -n "$TORTURE_BUILDONLY" +then + echo Build-only run specified, boot/test omitted. + exit 0 +fi +( $QEMU $qemu_args -m 512 -kernel $builddir/$BOOT_IMAGE -append "$qemu_append $boot_args"; echo $? > $resdir/qemu-retval ) & +qemu_pid=$! +commandcompleted=0 +echo Monitoring qemu job at pid $qemu_pid +while : +do + kruntime=`awk 'BEGIN { print systime() - '"$kstarttime"' }' < /dev/null` + if kill -0 $qemu_pid > /dev/null 2>&1 + then + if test $kruntime -ge $seconds + then + break; + fi + sleep 1 + else + commandcompleted=1 + if test $kruntime -lt $seconds + then + echo Completed in $kruntime vs. $seconds >> $resdir/Warnings 2>&1 + grep "^(qemu) qemu:" $resdir/kvm-test-1-run.sh.out >> $resdir/Warnings 2>&1 + killpid="`sed -n "s/^(qemu) qemu: terminating on signal [0-9]* from pid \([0-9]*\).*$/\1/p" $resdir/Warnings`" + if test -n "$killpid" + then + echo "ps -fp $killpid" >> $resdir/Warnings 2>&1 + ps -fp $killpid >> $resdir/Warnings 2>&1 + fi + else + echo ' ---' `date`: Kernel done + fi + break + fi +done +if test $commandcompleted -eq 0 +then + echo Grace period for qemu job at pid $qemu_pid + while : + do + kruntime=`awk 'BEGIN { print systime() - '"$kstarttime"' }' < /dev/null` + if kill -0 $qemu_pid > /dev/null 2>&1 + then + : + else + break + fi + if test $kruntime -ge $((seconds + grace)) + then + echo "!!! Hang at $kruntime vs. $seconds seconds" >> $resdir/Warnings 2>&1 + kill -KILL $qemu_pid + break + fi + sleep 1 + done +fi + +cp $builddir/console.log $resdir +parse-torture.sh $resdir/console.log $title +parse-console.sh $resdir/console.log $title diff --git a/tools/testing/selftests/rcutorture/bin/kvm.sh b/tools/testing/selftests/rcutorture/bin/kvm.sh new file mode 100644 index 00000000000..40285c58653 --- /dev/null +++ b/tools/testing/selftests/rcutorture/bin/kvm.sh @@ -0,0 +1,410 @@ +#!/bin/bash +# +# Run a series of 14 tests under KVM. These are not particularly +# well-selected or well-tuned, but are the current set. Run from the +# top level of the source tree. +# +# Edit the definitions below to set the locations of the various directories, +# as well as the test duration. +# +# Usage: sh kvm.sh [ options ] +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, you can access it online at +# http://www.gnu.org/licenses/gpl-2.0.html. +# +# Copyright (C) IBM Corporation, 2011 +# +# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> + +scriptname=$0 +args="$*" + +T=/tmp/kvm.sh.$$ +trap 'rm -rf $T' 0 +mkdir $T + +dur=30 +dryrun="" +KVM="`pwd`/tools/testing/selftests/rcutorture"; export KVM +PATH=${KVM}/bin:$PATH; export PATH +TORTURE_DEFCONFIG=defconfig +TORTURE_BOOT_IMAGE="" +TORTURE_INITRD="$KVM/initrd"; export TORTURE_INITRD +TORTURE_KMAKE_ARG="" +TORTURE_SUITE=rcu +resdir="" +configs="" +cpus=0 +ds=`date +%Y.%m.%d-%H:%M:%S` +kversion="" + +. functions.sh + +usage () { + echo "Usage: $scriptname optional arguments:" + echo " --bootargs kernel-boot-arguments" + echo " --bootimage relative-path-to-kernel-boot-image" + echo " --buildonly" + echo " --configs \"config-file list\"" + echo " --cpus N" + echo " --datestamp string" + echo " --defconfig string" + echo " --dryrun sched|script" + echo " --duration minutes" + echo " --interactive" + echo " --kmake-arg kernel-make-arguments" + echo " --kversion vN.NN" + echo " --mac nn:nn:nn:nn:nn:nn" + echo " --no-initrd" + echo " --qemu-args qemu-system-..." + echo " --qemu-cmd qemu-system-..." + echo " --results absolute-pathname" + echo " --torture rcu" + exit 1 +} + +while test $# -gt 0 +do + case "$1" in + --bootargs) + checkarg --bootargs "(list of kernel boot arguments)" "$#" "$2" '.*' '^--' + TORTURE_BOOTARGS="$2" + shift + ;; + --bootimage) + checkarg --bootimage "(relative path to kernel boot image)" "$#" "$2" '[a-zA-Z0-9][a-zA-Z0-9_]*' '^--' + TORTURE_BOOT_IMAGE="$2" + shift + ;; + --buildonly) + TORTURE_BUILDONLY=1 + ;; + --configs) + checkarg --configs "(list of config files)" "$#" "$2" '^[^/]*$' '^--' + configs="$2" + shift + ;; + --cpus) + checkarg --cpus "(number)" "$#" "$2" '^[0-9]*$' '^--' + cpus=$2 + shift + ;; + --datestamp) + checkarg --datestamp "(relative pathname)" "$#" "$2" '^[^/]*$' '^--' + ds=$2 + shift + ;; + --defconfig) + checkarg --defconfig "defconfigtype" "$#" "$2" '^[^/][^/]*$' '^--' + TORTURE_DEFCONFIG=$2 + shift + ;; + --dryrun) + checkarg --dryrun "sched|script" $# "$2" 'sched\|script' '^--' + dryrun=$2 + shift + ;; + --duration) + checkarg --duration "(minutes)" $# "$2" '^[0-9]*$' '^error' + dur=$2 + shift + ;; + --interactive) + TORTURE_QEMU_INTERACTIVE=1; export TORTURE_QEMU_INTERACTIVE + ;; + --kmake-arg) + checkarg --kmake-arg "(kernel make arguments)" $# "$2" '.*' '^error$' + TORTURE_KMAKE_ARG="$2" + shift + ;; + --kversion) + checkarg --kversion "(kernel version)" $# "$2" '^v[0-9.]*$' '^error' + kversion=$2 + shift + ;; + --mac) + checkarg --mac "(MAC address)" $# "$2" '^\([0-9a-fA-F]\{2\}:\)\{5\}[0-9a-fA-F]\{2\}$' error + TORTURE_QEMU_MAC=$2 + shift + ;; + --no-initrd) + TORTURE_INITRD=""; export TORTURE_INITRD + ;; + --qemu-args) + checkarg --qemu-args "-qemu args" $# "$2" '^-' '^error' + TORTURE_QEMU_ARG="$2" + shift + ;; + --qemu-cmd) + checkarg --qemu-cmd "(qemu-system-...)" $# "$2" 'qemu-system-' '^--' + TORTURE_QEMU_CMD="$2" + shift + ;; + --results) + checkarg --results "(absolute pathname)" "$#" "$2" '^/' '^error' + resdir=$2 + shift + ;; + --torture) + checkarg --torture "(suite name)" "$#" "$2" '^\(lock\|rcu\)$' '^--' + TORTURE_SUITE=$2 + shift + ;; + *) + echo Unknown argument $1 + usage + ;; + esac + shift +done + +CONFIGFRAG=${KVM}/configs/${TORTURE_SUITE}; export CONFIGFRAG +KVPATH=${CONFIGFRAG}/$kversion; export KVPATH + +if test -z "$configs" +then + configs="`cat $CONFIGFRAG/$kversion/CFLIST`" +fi + +if test -z "$resdir" +then + resdir=$KVM/res +fi + +# Create a file of test-name/#cpus pairs, sorted by decreasing #cpus. +touch $T/cfgcpu +for CF in $configs +do + if test -f "$CONFIGFRAG/$kversion/$CF" + then + echo $CF `configNR_CPUS.sh $CONFIGFRAG/$kversion/$CF` >> $T/cfgcpu + else + echo "The --configs file $CF does not exist, terminating." + exit 1 + fi +done +sort -k2nr $T/cfgcpu > $T/cfgcpu.sort + +# Use a greedy bin-packing algorithm, sorting the list accordingly. +awk < $T/cfgcpu.sort > $T/cfgcpu.pack -v ncpus=$cpus ' +BEGIN { + njobs = 0; +} + +{ + # Read file of tests and corresponding required numbers of CPUs. + cf[njobs] = $1; + cpus[njobs] = $2; + njobs++; +} + +END { + alldone = 0; + batch = 0; + nc = -1; + + # Each pass through the following loop creates on test batch + # that can be executed concurrently given ncpus. Note that a + # given test that requires more than the available CPUs will run in + # their own batch. Such tests just have to make do with what + # is available. + while (nc != ncpus) { + batch++; + nc = ncpus; + + # Each pass through the following loop considers one + # test for inclusion in the current batch. + for (i = 0; i < njobs; i++) { + if (done[i]) + continue; # Already part of a batch. + if (nc >= cpus[i] || nc == ncpus) { + + # This test fits into the current batch. + done[i] = batch; + nc -= cpus[i]; + if (nc <= 0) + break; # Too-big test in its own batch. + } + } + } + + # Dump out the tests in batch order. + for (b = 1; b <= batch; b++) + for (i = 0; i < njobs; i++) + if (done[i] == b) + print cf[i], cpus[i]; +}' + +# Generate a script to execute the tests in appropriate batches. +cat << ___EOF___ > $T/script +CONFIGFRAG="$CONFIGFRAG"; export CONFIGFRAG +KVM="$KVM"; export KVM +KVPATH="$KVPATH"; export KVPATH +PATH="$PATH"; export PATH +TORTURE_BOOT_IMAGE="$TORTURE_BOOT_IMAGE"; export TORTURE_BOOT_IMAGE +TORTURE_BUILDONLY="$TORTURE_BUILDONLY"; export TORTURE_BUILDONLY +TORTURE_DEFCONFIG="$TORTURE_DEFCONFIG"; export TORTURE_DEFCONFIG +TORTURE_INITRD="$TORTURE_INITRD"; export TORTURE_INITRD +TORTURE_KMAKE_ARG="$TORTURE_KMAKE_ARG"; export TORTURE_KMAKE_ARG +TORTURE_QEMU_CMD="$TORTURE_QEMU_CMD"; export TORTURE_QEMU_CMD +TORTURE_QEMU_INTERACTIVE="$TORTURE_QEMU_INTERACTIVE"; export TORTURE_QEMU_INTERACTIVE +TORTURE_QEMU_MAC="$TORTURE_QEMU_MAC"; export TORTURE_QEMU_MAC +TORTURE_SUITE="$TORTURE_SUITE"; export TORTURE_SUITE +if ! test -e $resdir +then + mkdir -p "$resdir" || : +fi +mkdir $resdir/$ds +echo Results directory: $resdir/$ds +echo $scriptname $args +touch $resdir/$ds/log +echo $scriptname $args >> $resdir/$ds/log +echo ${TORTURE_SUITE} > $resdir/$ds/TORTURE_SUITE +pwd > $resdir/$ds/testid.txt +if test -d .git +then + git status >> $resdir/$ds/testid.txt + git rev-parse HEAD >> $resdir/$ds/testid.txt + if ! git diff HEAD > $T/git-diff 2>&1 + then + cp $T/git-diff $resdir/$ds + fi +fi +___EOF___ +awk < $T/cfgcpu.pack \ + -v CONFIGDIR="$CONFIGFRAG/$kversion/" \ + -v KVM="$KVM" \ + -v ncpus=$cpus \ + -v rd=$resdir/$ds/ \ + -v dur=$dur \ + -v TORTURE_QEMU_ARG="$TORTURE_QEMU_ARG" \ + -v TORTURE_BOOTARGS="$TORTURE_BOOTARGS" \ +'BEGIN { + i = 0; +} + +{ + cf[i] = $1; + cpus[i] = $2; + i++; +} + +# Dump out the scripting required to run one test batch. +function dump(first, pastlast) +{ + print "echo ----Start batch: `date`"; + print "echo ----Start batch: `date` >> " rd "/log"; + jn=1 + for (j = first; j < pastlast; j++) { + builddir=KVM "/b" jn + cpusr[jn] = cpus[j]; + if (cfrep[cf[j]] == "") { + cfr[jn] = cf[j]; + cfrep[cf[j]] = 1; + } else { + cfrep[cf[j]]++; + cfr[jn] = cf[j] "." cfrep[cf[j]]; + } + if (cpusr[jn] > ncpus && ncpus != 0) + ovf = "(!)"; + else + ovf = ""; + print "echo ", cfr[jn], cpusr[jn] ovf ": Starting build. `date`"; + print "echo ", cfr[jn], cpusr[jn] ovf ": Starting build. `date` >> " rd "/log"; + print "rm -f " builddir ".*"; + print "touch " builddir ".wait"; + print "mkdir " builddir " > /dev/null 2>&1 || :"; + print "mkdir " rd cfr[jn] " || :"; + print "kvm-test-1-run.sh " CONFIGDIR cf[j], builddir, rd cfr[jn], dur " \"" TORTURE_QEMU_ARG "\" \"" TORTURE_BOOTARGS "\" > " rd cfr[jn] "/kvm-test-1-run.sh.out 2>&1 &" + print "echo ", cfr[jn], cpusr[jn] ovf ": Waiting for build to complete. `date`"; + print "echo ", cfr[jn], cpusr[jn] ovf ": Waiting for build to complete. `date` >> " rd "/log"; + print "while test -f " builddir ".wait" + print "do" + print "\tsleep 1" + print "done" + print "echo ", cfr[jn], cpusr[jn] ovf ": Build complete. `date`"; + print "echo ", cfr[jn], cpusr[jn] ovf ": Build complete. `date` >> " rd "/log"; + jn++; + } + for (j = 1; j < jn; j++) { + builddir=KVM "/b" j + print "rm -f " builddir ".ready" + print "echo ----", cfr[j], cpusr[j] ovf ": Starting kernel. `date`"; + print "echo ----", cfr[j], cpusr[j] ovf ": Starting kernel. `date` >> " rd "/log"; + } + print "wait" + print "echo ---- All kernel runs complete. `date`"; + print "echo ---- All kernel runs complete. `date` >> " rd "/log"; + for (j = 1; j < jn; j++) { + builddir=KVM "/b" j + print "echo ----", cfr[j], cpusr[j] ovf ": Build/run results:"; + print "echo ----", cfr[j], cpusr[j] ovf ": Build/run results: >> " rd "/log"; + print "cat " rd cfr[j] "/kvm-test-1-run.sh.out"; + print "cat " rd cfr[j] "/kvm-test-1-run.sh.out >> " rd "/log"; + } +} + +END { + njobs = i; + nc = ncpus; + first = 0; + + # Each pass through the following loop considers one test. + for (i = 0; i < njobs; i++) { + if (ncpus == 0) { + # Sequential test specified, each test its own batch. + dump(i, i + 1); + first = i; + } else if (nc < cpus[i] && i != 0) { + # Out of CPUs, dump out a batch. + dump(first, i); + first = i; + nc = ncpus; + } + # Account for the CPUs needed by the current test. + nc -= cpus[i]; + } + # Dump the last batch. + if (ncpus != 0) + dump(first, i); +}' >> $T/script + +cat << ___EOF___ >> $T/script +echo +echo +echo " --- `date` Test summary:" +echo Results directory: $resdir/$ds +if test -z "$TORTURE_BUILDONLY" +then + kvm-recheck.sh $resdir/$ds +fi +___EOF___ + +if test "$dryrun" = script +then + cat $T/script + exit 0 +elif test "$dryrun" = sched +then + # Extract the test run schedule from the script. + egrep 'Start batch|Starting build\.' $T/script | + grep -v ">>" | + sed -e 's/:.*$//' -e 's/^echo //' + exit 0 +else + # Not a dryru, so run the script. + sh $T/script +fi + +# Tracing: trace_event=rcu:rcu_grace_period,rcu:rcu_future_grace_period,rcu:rcu_grace_period_init,rcu:rcu_nocb_wake,rcu:rcu_preempt_task,rcu:rcu_unlock_preempted_task,rcu:rcu_quiescent_state_report,rcu:rcu_fqs,rcu:rcu_callback,rcu:rcu_kfree_callback,rcu:rcu_batch_start,rcu:rcu_invoke_callback,rcu:rcu_invoke_kfree_callback,rcu:rcu_batch_end,rcu:rcu_torture_read,rcu:rcu_barrier diff --git a/tools/testing/selftests/rcutorture/bin/parse-build.sh b/tools/testing/selftests/rcutorture/bin/parse-build.sh new file mode 100755 index 00000000000..543230951c3 --- /dev/null +++ b/tools/testing/selftests/rcutorture/bin/parse-build.sh @@ -0,0 +1,57 @@ +#!/bin/sh +# +# Check the build output from an rcutorture run for goodness. +# The "file" is a pathname on the local system, and "title" is +# a text string for error-message purposes. +# +# The file must contain kernel build output. +# +# Usage: +# sh parse-build.sh file title +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, you can access it online at +# http://www.gnu.org/licenses/gpl-2.0.html. +# +# Copyright (C) IBM Corporation, 2011 +# +# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> + +T=$1 +title=$2 + +. functions.sh + +if grep -q CC < $T +then + : +else + print_bug $title no build + exit 1 +fi + +if grep -q "error:" < $T +then + print_bug $title build errors: + grep "error:" < $T + exit 2 +fi +exit 0 + +if egrep -q "rcu[^/]*\.c.*warning:|rcu.*\.h.*warning:" < $T +then + print_warning $title build errors: + egrep "rcu[^/]*\.c.*warning:|rcu.*\.h.*warning:" < $T + exit 2 +fi +exit 0 diff --git a/tools/testing/selftests/rcutorture/bin/parse-console.sh b/tools/testing/selftests/rcutorture/bin/parse-console.sh new file mode 100755 index 00000000000..4185d4cab32 --- /dev/null +++ b/tools/testing/selftests/rcutorture/bin/parse-console.sh @@ -0,0 +1,41 @@ +#!/bin/sh +# +# Check the console output from an rcutorture run for oopses. +# The "file" is a pathname on the local system, and "title" is +# a text string for error-message purposes. +# +# Usage: +# sh parse-console.sh file title +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, you can access it online at +# http://www.gnu.org/licenses/gpl-2.0.html. +# +# Copyright (C) IBM Corporation, 2011 +# +# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> + +T=/tmp/abat-chk-badness.sh.$$ +trap 'rm -f $T' 0 + +file="$1" +title="$2" + +. functions.sh + +egrep 'Badness|WARNING:|Warn|BUG|===========|Call Trace:|Oops:' < $file | grep -v 'ODEBUG: ' | grep -v 'Warning: unable to open an initial console' > $T +if test -s $T +then + print_warning Assertion failure in $file $title + cat $T +fi diff --git a/tools/testing/selftests/rcutorture/bin/parse-torture.sh b/tools/testing/selftests/rcutorture/bin/parse-torture.sh new file mode 100755 index 00000000000..3455560ab4e --- /dev/null +++ b/tools/testing/selftests/rcutorture/bin/parse-torture.sh @@ -0,0 +1,106 @@ +#!/bin/sh +# +# Check the console output from a torture run for goodness. +# The "file" is a pathname on the local system, and "title" is +# a text string for error-message purposes. +# +# The file must contain torture output, but can be interspersed +# with other dmesg text, as in console-log output. +# +# Usage: +# sh parse-torture.sh file title +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, you can access it online at +# http://www.gnu.org/licenses/gpl-2.0.html. +# +# Copyright (C) IBM Corporation, 2011 +# +# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> + +T=/tmp/parse-torture.sh.$$ +file="$1" +title="$2" + +trap 'rm -f $T.seq' 0 + +. functions.sh + +# check for presence of torture output file. + +if test -f "$file" -a -r "$file" +then + : +else + echo $title unreadable torture output file: $file + exit 1 +fi + +# check for abject failure + +if grep -q FAILURE $file || grep -q -e '-torture.*!!!' $file +then + nerrs=`grep --binary-files=text '!!!' $file | tail -1 | awk '{for (i=NF-8;i<=NF;i++) sum+=$i; } END {print sum}'` + print_bug $title FAILURE, $nerrs instances + echo " " $url + exit +fi + +grep --binary-files=text 'torture:.*ver:' $file | grep --binary-files=text -v '(null)' | sed -e 's/^(initramfs)[^]]*] //' -e 's/^\[[^]]*] //' | +awk ' +BEGIN { + ver = 0; + badseq = 0; + } + + { + if (!badseq && ($5 + 0 != $5 || $5 <= ver)) { + badseqno1 = ver; + badseqno2 = $5; + badseqnr = NR; + badseq = 1; + } + ver = $5 + } + +END { + if (badseq) { + if (badseqno1 == badseqno2 && badseqno2 == ver) + print "GP HANG at " ver " torture stat " badseqnr; + else + print "BAD SEQ " badseqno1 ":" badseqno2 " last:" ver " version " badseqnr; + } + }' > $T.seq + +if grep -q SUCCESS $file +then + if test -s $T.seq + then + print_warning $title $title `cat $T.seq` + echo " " $file + exit 2 + fi +else + if grep -q "_HOTPLUG:" $file + then + print_warning HOTPLUG FAILURES $title `cat $T.seq` + echo " " $file + exit 3 + fi + echo $title no success message, `grep --binary-files=text 'ver:' $file | wc -l` successful version messages + if test -s $T.seq + then + print_warning $title `cat $T.seq` + fi + exit 2 +fi diff --git a/tools/testing/selftests/rcutorture/configs/lock/BUSTED b/tools/testing/selftests/rcutorture/configs/lock/BUSTED new file mode 100644 index 00000000000..1d1da1477fc --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/lock/BUSTED @@ -0,0 +1,6 @@ +CONFIG_SMP=y +CONFIG_NR_CPUS=4 +CONFIG_HOTPLUG_CPU=y +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y diff --git a/tools/testing/selftests/rcutorture/configs/lock/BUSTED.boot b/tools/testing/selftests/rcutorture/configs/lock/BUSTED.boot new file mode 100644 index 00000000000..6386c15e977 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/lock/BUSTED.boot @@ -0,0 +1 @@ +locktorture.torture_type=lock_busted diff --git a/tools/testing/selftests/rcutorture/configs/lock/CFLIST b/tools/testing/selftests/rcutorture/configs/lock/CFLIST new file mode 100644 index 00000000000..a061b22d189 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/lock/CFLIST @@ -0,0 +1 @@ +LOCK01 diff --git a/tools/testing/selftests/rcutorture/configs/lock/CFcommon b/tools/testing/selftests/rcutorture/configs/lock/CFcommon new file mode 100644 index 00000000000..e372dc26925 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/lock/CFcommon @@ -0,0 +1,2 @@ +CONFIG_LOCK_TORTURE_TEST=y +CONFIG_PRINTK_TIME=y diff --git a/tools/testing/selftests/rcutorture/configs/lock/LOCK01 b/tools/testing/selftests/rcutorture/configs/lock/LOCK01 new file mode 100644 index 00000000000..a9625e3d6cd --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/lock/LOCK01 @@ -0,0 +1,6 @@ +CONFIG_SMP=y +CONFIG_NR_CPUS=8 +CONFIG_HOTPLUG_CPU=y +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y diff --git a/tools/testing/selftests/rcutorture/configs/lock/ver_functions.sh b/tools/testing/selftests/rcutorture/configs/lock/ver_functions.sh new file mode 100644 index 00000000000..9746ea1cd6c --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/lock/ver_functions.sh @@ -0,0 +1,43 @@ +#!/bin/bash +# +# Kernel-version-dependent shell functions for the rest of the scripts. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, you can access it online at +# http://www.gnu.org/licenses/gpl-2.0.html. +# +# Copyright (C) IBM Corporation, 2014 +# +# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> + +# locktorture_param_onoff bootparam-string config-file +# +# Adds onoff locktorture module parameters to kernels having it. +locktorture_param_onoff () { + if ! bootparam_hotplug_cpu "$1" && configfrag_hotplug_cpu "$2" + then + echo CPU-hotplug kernel, adding locktorture onoff. 1>&2 + echo locktorture.onoff_interval=3 locktorture.onoff_holdoff=30 + fi +} + +# per_version_boot_params bootparam-string config-file seconds +# +# Adds per-version torture-module parameters to kernels supporting them. +per_version_boot_params () { + echo $1 `locktorture_param_onoff "$1" "$2"` \ + locktorture.stat_interval=15 \ + locktorture.shutdown_secs=$3 \ + locktorture.locktorture_runnable=1 \ + locktorture.verbose=1 +} diff --git a/tools/testing/selftests/rcutorture/configs/rcu/BUSTED b/tools/testing/selftests/rcutorture/configs/rcu/BUSTED new file mode 100644 index 00000000000..48d8a245c7f --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/BUSTED @@ -0,0 +1,7 @@ +CONFIG_RCU_TRACE=n +CONFIG_SMP=y +CONFIG_NR_CPUS=4 +CONFIG_HOTPLUG_CPU=y +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y diff --git a/tools/testing/selftests/rcutorture/configs/rcu/BUSTED.boot b/tools/testing/selftests/rcutorture/configs/rcu/BUSTED.boot new file mode 100644 index 00000000000..6804f9dcfc1 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/BUSTED.boot @@ -0,0 +1 @@ +rcutorture.torture_type=rcu_busted diff --git a/tools/testing/selftests/rcutorture/configs/rcu/CFLIST b/tools/testing/selftests/rcutorture/configs/rcu/CFLIST new file mode 100644 index 00000000000..cd3d29cb0a4 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/CFLIST @@ -0,0 +1,13 @@ +TREE01 +TREE02 +TREE03 +TREE04 +TREE05 +TREE06 +TREE07 +TREE08 +TREE09 +SRCU-N +SRCU-P +TINY01 +TINY02 diff --git a/tools/testing/selftests/rcutorture/configs/rcu/CFcommon b/tools/testing/selftests/rcutorture/configs/rcu/CFcommon new file mode 100644 index 00000000000..d2d2a86139d --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/CFcommon @@ -0,0 +1,2 @@ +CONFIG_RCU_TORTURE_TEST=y +CONFIG_PRINTK_TIME=y diff --git a/tools/testing/selftests/rcutorture/configs/rcu/SRCU-N b/tools/testing/selftests/rcutorture/configs/rcu/SRCU-N new file mode 100644 index 00000000000..9fbb41b9b31 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/SRCU-N @@ -0,0 +1,7 @@ +CONFIG_RCU_TRACE=n +CONFIG_SMP=y +CONFIG_NR_CPUS=4 +CONFIG_HOTPLUG_CPU=y +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n diff --git a/tools/testing/selftests/rcutorture/configs/rcu/SRCU-N.boot b/tools/testing/selftests/rcutorture/configs/rcu/SRCU-N.boot new file mode 100644 index 00000000000..238bfe3bd0c --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/SRCU-N.boot @@ -0,0 +1 @@ +rcutorture.torture_type=srcu diff --git a/tools/testing/selftests/rcutorture/configs/rcu/SRCU-P b/tools/testing/selftests/rcutorture/configs/rcu/SRCU-P new file mode 100644 index 00000000000..4b6f272dba2 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/SRCU-P @@ -0,0 +1,7 @@ +CONFIG_RCU_TRACE=n +CONFIG_SMP=y +CONFIG_NR_CPUS=8 +CONFIG_HOTPLUG_CPU=y +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y diff --git a/tools/testing/selftests/rcutorture/configs/rcu/SRCU-P.boot b/tools/testing/selftests/rcutorture/configs/rcu/SRCU-P.boot new file mode 100644 index 00000000000..238bfe3bd0c --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/SRCU-P.boot @@ -0,0 +1 @@ +rcutorture.torture_type=srcu diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TINY01 b/tools/testing/selftests/rcutorture/configs/rcu/TINY01 new file mode 100644 index 00000000000..0a63e073a00 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/TINY01 @@ -0,0 +1,12 @@ +CONFIG_SMP=n +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +#CHECK#CONFIG_TINY_RCU=y +CONFIG_HZ_PERIODIC=n +CONFIG_NO_HZ_IDLE=y +CONFIG_NO_HZ_FULL=n +CONFIG_RCU_TRACE=n +CONFIG_DEBUG_LOCK_ALLOC=n +CONFIG_DEBUG_OBJECTS_RCU_HEAD=n +CONFIG_PREEMPT_COUNT=n diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TINY02 b/tools/testing/selftests/rcutorture/configs/rcu/TINY02 new file mode 100644 index 00000000000..f4feaee4077 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/TINY02 @@ -0,0 +1,12 @@ +CONFIG_SMP=n +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +#CHECK#CONFIG_TINY_RCU=y +CONFIG_HZ_PERIODIC=y +CONFIG_NO_HZ_IDLE=n +CONFIG_NO_HZ_FULL=n +CONFIG_RCU_TRACE=y +CONFIG_DEBUG_LOCK_ALLOC=y +CONFIG_DEBUG_OBJECTS_RCU_HEAD=n +CONFIG_PREEMPT_COUNT=y diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE01 b/tools/testing/selftests/rcutorture/configs/rcu/TREE01 new file mode 100644 index 00000000000..9c827ec59a9 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE01 @@ -0,0 +1,22 @@ +CONFIG_SMP=y +CONFIG_NR_CPUS=8 +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_HZ_PERIODIC=n +CONFIG_NO_HZ_IDLE=y +CONFIG_NO_HZ_FULL=n +CONFIG_RCU_FAST_NO_HZ=y +CONFIG_RCU_TRACE=y +CONFIG_HOTPLUG_CPU=y +CONFIG_RCU_FANOUT=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_RCU_NOCB_CPU=y +CONFIG_RCU_NOCB_CPU_ZERO=y +CONFIG_DEBUG_LOCK_ALLOC=n +CONFIG_PROVE_RCU_DELAY=n +CONFIG_RCU_CPU_STALL_INFO=n +CONFIG_RCU_CPU_STALL_VERBOSE=n +CONFIG_RCU_BOOST=n +CONFIG_DEBUG_OBJECTS_RCU_HEAD=n diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE01.boot b/tools/testing/selftests/rcutorture/configs/rcu/TREE01.boot new file mode 100644 index 00000000000..0fc8a342893 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE01.boot @@ -0,0 +1 @@ +rcutorture.torture_type=rcu_bh diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE02 b/tools/testing/selftests/rcutorture/configs/rcu/TREE02 new file mode 100644 index 00000000000..1a777b5f68b --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE02 @@ -0,0 +1,25 @@ +CONFIG_SMP=y +CONFIG_NR_CPUS=8 +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_HZ_PERIODIC=n +CONFIG_NO_HZ_IDLE=y +CONFIG_NO_HZ_FULL=n +CONFIG_RCU_FAST_NO_HZ=n +CONFIG_RCU_TRACE=n +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_RCU_FANOUT=3 +CONFIG_RCU_FANOUT_LEAF=3 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_RCU_NOCB_CPU=n +CONFIG_DEBUG_LOCK_ALLOC=y +CONFIG_PROVE_LOCKING=n +CONFIG_PROVE_RCU_DELAY=n +CONFIG_RCU_CPU_STALL_INFO=n +CONFIG_RCU_CPU_STALL_VERBOSE=y +CONFIG_RCU_BOOST=n +CONFIG_DEBUG_OBJECTS_RCU_HEAD=n diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE02-T b/tools/testing/selftests/rcutorture/configs/rcu/TREE02-T new file mode 100644 index 00000000000..61c8d9ce5bb --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE02-T @@ -0,0 +1,25 @@ +CONFIG_SMP=y +CONFIG_NR_CPUS=8 +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_HZ_PERIODIC=n +CONFIG_NO_HZ_IDLE=y +CONFIG_NO_HZ_FULL=n +CONFIG_RCU_FAST_NO_HZ=n +CONFIG_RCU_TRACE=y +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_RCU_FANOUT=3 +CONFIG_RCU_FANOUT_LEAF=3 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_RCU_NOCB_CPU=n +CONFIG_DEBUG_LOCK_ALLOC=y +CONFIG_PROVE_LOCKING=n +CONFIG_PROVE_RCU_DELAY=n +CONFIG_RCU_CPU_STALL_INFO=n +CONFIG_RCU_CPU_STALL_VERBOSE=y +CONFIG_RCU_BOOST=n +CONFIG_DEBUG_OBJECTS_RCU_HEAD=n diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE03 b/tools/testing/selftests/rcutorture/configs/rcu/TREE03 new file mode 100644 index 00000000000..c1f111c1561 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE03 @@ -0,0 +1,22 @@ +CONFIG_SMP=y +CONFIG_NR_CPUS=8 +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_HZ_PERIODIC=y +CONFIG_NO_HZ_IDLE=n +CONFIG_NO_HZ_FULL=n +CONFIG_RCU_TRACE=y +CONFIG_HOTPLUG_CPU=y +CONFIG_RCU_FANOUT=4 +CONFIG_RCU_FANOUT_LEAF=4 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_RCU_NOCB_CPU=n +CONFIG_DEBUG_LOCK_ALLOC=n +CONFIG_PROVE_RCU_DELAY=n +CONFIG_RCU_CPU_STALL_INFO=n +CONFIG_RCU_CPU_STALL_VERBOSE=n +CONFIG_RCU_BOOST=y +CONFIG_RCU_BOOST_PRIO=2 +CONFIG_DEBUG_OBJECTS_RCU_HEAD=n diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE04 b/tools/testing/selftests/rcutorture/configs/rcu/TREE04 new file mode 100644 index 00000000000..7dbd27ce17a --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE04 @@ -0,0 +1,24 @@ +CONFIG_SMP=y +CONFIG_NR_CPUS=8 +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +#CHECK#CONFIG_TREE_RCU=y +CONFIG_HZ_PERIODIC=n +CONFIG_NO_HZ_IDLE=n +CONFIG_NO_HZ_FULL=y +CONFIG_NO_HZ_FULL_ALL=y +CONFIG_RCU_FAST_NO_HZ=y +CONFIG_RCU_TRACE=y +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_RCU_FANOUT=2 +CONFIG_RCU_FANOUT_LEAF=2 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_RCU_NOCB_CPU=n +CONFIG_DEBUG_LOCK_ALLOC=n +CONFIG_PROVE_RCU_DELAY=n +CONFIG_RCU_CPU_STALL_INFO=y +CONFIG_RCU_CPU_STALL_VERBOSE=y +CONFIG_DEBUG_OBJECTS_RCU_HEAD=n diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE04.boot b/tools/testing/selftests/rcutorture/configs/rcu/TREE04.boot new file mode 100644 index 00000000000..0fc8a342893 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE04.boot @@ -0,0 +1 @@ +rcutorture.torture_type=rcu_bh diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE05 b/tools/testing/selftests/rcutorture/configs/rcu/TREE05 new file mode 100644 index 00000000000..d0f32e57474 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE05 @@ -0,0 +1,24 @@ +CONFIG_SMP=y +CONFIG_NR_CPUS=8 +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +#CHECK#CONFIG_TREE_RCU=y +CONFIG_HZ_PERIODIC=n +CONFIG_NO_HZ_IDLE=y +CONFIG_NO_HZ_FULL=n +CONFIG_RCU_FAST_NO_HZ=n +CONFIG_RCU_TRACE=n +CONFIG_HOTPLUG_CPU=y +CONFIG_RCU_FANOUT=6 +CONFIG_RCU_FANOUT_LEAF=6 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_RCU_NOCB_CPU=y +CONFIG_RCU_NOCB_CPU_NONE=y +CONFIG_DEBUG_LOCK_ALLOC=y +CONFIG_PROVE_LOCKING=y +CONFIG_PROVE_RCU=y +CONFIG_PROVE_RCU_DELAY=y +CONFIG_RCU_CPU_STALL_INFO=n +CONFIG_RCU_CPU_STALL_VERBOSE=n +CONFIG_DEBUG_OBJECTS_RCU_HEAD=n diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE05.boot b/tools/testing/selftests/rcutorture/configs/rcu/TREE05.boot new file mode 100644 index 00000000000..3b42b8b033c --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE05.boot @@ -0,0 +1 @@ +rcutorture.torture_type=sched diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE06 b/tools/testing/selftests/rcutorture/configs/rcu/TREE06 new file mode 100644 index 00000000000..2e477dfb9c5 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE06 @@ -0,0 +1,25 @@ +CONFIG_SMP=y +CONFIG_NR_CPUS=8 +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +#CHECK#CONFIG_TREE_RCU=y +CONFIG_HZ_PERIODIC=n +CONFIG_NO_HZ_IDLE=y +CONFIG_NO_HZ_FULL=n +CONFIG_RCU_FAST_NO_HZ=n +CONFIG_RCU_TRACE=n +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_RCU_FANOUT=6 +CONFIG_RCU_FANOUT_LEAF=6 +CONFIG_RCU_FANOUT_EXACT=y +CONFIG_RCU_NOCB_CPU=n +CONFIG_DEBUG_LOCK_ALLOC=y +CONFIG_PROVE_LOCKING=y +CONFIG_PROVE_RCU=y +CONFIG_PROVE_RCU_DELAY=n +CONFIG_RCU_CPU_STALL_INFO=n +CONFIG_RCU_CPU_STALL_VERBOSE=n +CONFIG_DEBUG_OBJECTS_RCU_HEAD=y diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE07 b/tools/testing/selftests/rcutorture/configs/rcu/TREE07 new file mode 100644 index 00000000000..042f86ef362 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE07 @@ -0,0 +1,23 @@ +CONFIG_SMP=y +CONFIG_NR_CPUS=16 +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +#CHECK#CONFIG_TREE_RCU=y +CONFIG_HZ_PERIODIC=n +CONFIG_NO_HZ_IDLE=n +CONFIG_NO_HZ_FULL=y +CONFIG_NO_HZ_FULL_ALL=y +CONFIG_NO_HZ_FULL_SYSIDLE=y +CONFIG_RCU_FAST_NO_HZ=n +CONFIG_RCU_TRACE=y +CONFIG_HOTPLUG_CPU=y +CONFIG_RCU_FANOUT=2 +CONFIG_RCU_FANOUT_LEAF=2 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_RCU_NOCB_CPU=n +CONFIG_DEBUG_LOCK_ALLOC=n +CONFIG_PROVE_RCU_DELAY=n +CONFIG_RCU_CPU_STALL_INFO=y +CONFIG_RCU_CPU_STALL_VERBOSE=n +CONFIG_DEBUG_OBJECTS_RCU_HEAD=n diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE08 b/tools/testing/selftests/rcutorture/configs/rcu/TREE08 new file mode 100644 index 00000000000..3438cee1e3c --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE08 @@ -0,0 +1,25 @@ +CONFIG_SMP=y +CONFIG_NR_CPUS=16 +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_HZ_PERIODIC=n +CONFIG_NO_HZ_IDLE=y +CONFIG_NO_HZ_FULL=n +CONFIG_RCU_FAST_NO_HZ=n +CONFIG_RCU_TRACE=n +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_RCU_FANOUT=3 +CONFIG_RCU_FANOUT_EXACT=y +CONFIG_RCU_FANOUT_LEAF=2 +CONFIG_RCU_NOCB_CPU=y +CONFIG_RCU_NOCB_CPU_ALL=y +CONFIG_DEBUG_LOCK_ALLOC=n +CONFIG_PROVE_RCU_DELAY=n +CONFIG_RCU_CPU_STALL_INFO=n +CONFIG_RCU_CPU_STALL_VERBOSE=n +CONFIG_RCU_BOOST=n +CONFIG_DEBUG_OBJECTS_RCU_HEAD=n diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE08-T b/tools/testing/selftests/rcutorture/configs/rcu/TREE08-T new file mode 100644 index 00000000000..bf4523d3e44 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE08-T @@ -0,0 +1,25 @@ +CONFIG_SMP=y +CONFIG_NR_CPUS=16 +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_HZ_PERIODIC=n +CONFIG_NO_HZ_IDLE=y +CONFIG_NO_HZ_FULL=n +CONFIG_RCU_FAST_NO_HZ=n +CONFIG_RCU_TRACE=y +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_RCU_FANOUT=3 +CONFIG_RCU_FANOUT_EXACT=y +CONFIG_RCU_FANOUT_LEAF=2 +CONFIG_RCU_NOCB_CPU=y +CONFIG_RCU_NOCB_CPU_ALL=y +CONFIG_DEBUG_LOCK_ALLOC=n +CONFIG_PROVE_RCU_DELAY=n +CONFIG_RCU_CPU_STALL_INFO=n +CONFIG_RCU_CPU_STALL_VERBOSE=n +CONFIG_RCU_BOOST=n +CONFIG_DEBUG_OBJECTS_RCU_HEAD=n diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE08.boot b/tools/testing/selftests/rcutorture/configs/rcu/TREE08.boot new file mode 100644 index 00000000000..3b42b8b033c --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE08.boot @@ -0,0 +1 @@ +rcutorture.torture_type=sched diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE09 b/tools/testing/selftests/rcutorture/configs/rcu/TREE09 new file mode 100644 index 00000000000..81e4f7c0bf0 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE09 @@ -0,0 +1,20 @@ +CONFIG_SMP=n +CONFIG_NR_CPUS=1 +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_HZ_PERIODIC=n +CONFIG_NO_HZ_IDLE=y +CONFIG_NO_HZ_FULL=n +CONFIG_RCU_TRACE=n +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_RCU_NOCB_CPU=n +CONFIG_DEBUG_LOCK_ALLOC=n +CONFIG_PROVE_RCU_DELAY=n +CONFIG_RCU_CPU_STALL_INFO=n +CONFIG_RCU_CPU_STALL_VERBOSE=n +CONFIG_RCU_BOOST=n +CONFIG_DEBUG_OBJECTS_RCU_HEAD=n diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v0.0/CFLIST b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/CFLIST new file mode 100644 index 00000000000..18223947bbc --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/CFLIST @@ -0,0 +1,14 @@ +P1-S-T-NH-SD-SMP-HP +P2-2-t-nh-sd-SMP-hp +P3-3-T-nh-SD-SMP-hp +P4-A-t-NH-sd-SMP-HP +P5-U-T-NH-sd-SMP-hp +N1-S-T-NH-SD-SMP-HP +N2-2-t-nh-sd-SMP-hp +N3-3-T-nh-SD-SMP-hp +N4-A-t-NH-sd-SMP-HP +N5-U-T-NH-sd-SMP-hp +PT1-nh +PT2-NH +NT1-nh +NT3-NH diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v0.0/N1-S-T-NH-SD-SMP-HP b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/N1-S-T-NH-SD-SMP-HP new file mode 100644 index 00000000000..d3ef873eb6e --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/N1-S-T-NH-SD-SMP-HP @@ -0,0 +1,18 @@ +CONFIG_RCU_TRACE=y +CONFIG_NO_HZ=y +CONFIG_SMP=y +CONFIG_RCU_FANOUT=8 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=y +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +#CHECK#CONFIG_TREE_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v0.0/N2-2-t-nh-sd-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/N2-2-t-nh-sd-SMP-hp new file mode 100644 index 00000000000..02e418572b1 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/N2-2-t-nh-sd-SMP-hp @@ -0,0 +1,20 @@ +CONFIG_RCU_TRACE=n +CONFIG_NO_HZ=n +CONFIG_SMP=y +CONFIG_RCU_FANOUT=4 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +#CHECK#CONFIG_TREE_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v0.0/N3-3-T-nh-SD-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/N3-3-T-nh-SD-SMP-hp new file mode 100644 index 00000000000..b3100f69c8c --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/N3-3-T-nh-SD-SMP-hp @@ -0,0 +1,22 @@ +CONFIG_RCU_TRACE=y +CONFIG_NO_HZ=n +CONFIG_SMP=y +CONFIG_RCU_FANOUT=2 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +#CHECK#CONFIG_TREE_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_PROVE_LOCKING=y +CONFIG_PROVE_RCU=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v0.0/N4-A-t-NH-sd-SMP-HP b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/N4-A-t-NH-sd-SMP-HP new file mode 100644 index 00000000000..c56b4453072 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/N4-A-t-NH-sd-SMP-HP @@ -0,0 +1,18 @@ +CONFIG_RCU_TRACE=n +CONFIG_NO_HZ=y +CONFIG_SMP=y +CONFIG_RCU_FANOUT=6 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=y +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +#CHECK#CONFIG_TREE_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v0.0/N5-U-T-NH-sd-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/N5-U-T-NH-sd-SMP-hp new file mode 100644 index 00000000000..90d924fea9e --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/N5-U-T-NH-sd-SMP-hp @@ -0,0 +1,22 @@ +CONFIG_RCU_TRACE=y +CONFIG_DEBUG_KERNEL=y +CONFIG_RCU_CPU_STALL_INFO=y +CONFIG_NO_HZ=y +CONFIG_SMP=y +CONFIG_RCU_FANOUT=6 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=y +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +#CHECK#CONFIG_TREE_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v0.0/NT1-nh b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/NT1-nh new file mode 100644 index 00000000000..023f312a931 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/NT1-nh @@ -0,0 +1,23 @@ +#CHECK#CONFIG_TINY_RCU=y +CONFIG_RCU_TRACE=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +# +CONFIG_SMP=n +# +CONFIG_HOTPLUG_CPU=n +# +CONFIG_NO_HZ=n +# +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +CONFIG_PROVE_LOCKING=y +CONFIG_PROVE_RCU=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v0.0/NT3-NH b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/NT3-NH new file mode 100644 index 00000000000..6fd0235dae7 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/NT3-NH @@ -0,0 +1,20 @@ +#CHECK#CONFIG_TINY_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +# +CONFIG_SMP=n +# +CONFIG_HOTPLUG_CPU=n +# +CONFIG_NO_HZ=y +# +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v0.0/P1-S-T-NH-SD-SMP-HP b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/P1-S-T-NH-SD-SMP-HP new file mode 100644 index 00000000000..f72402d7c13 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/P1-S-T-NH-SD-SMP-HP @@ -0,0 +1,19 @@ +CONFIG_RCU_TRACE=y +CONFIG_RCU_CPU_STALL_INFO=y +CONFIG_NO_HZ=y +CONFIG_SMP=y +CONFIG_RCU_FANOUT=8 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=y +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v0.0/P2-2-t-nh-sd-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/P2-2-t-nh-sd-SMP-hp new file mode 100644 index 00000000000..0f3b667d2a9 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/P2-2-t-nh-sd-SMP-hp @@ -0,0 +1,20 @@ +CONFIG_RCU_TRACE=n +CONFIG_NO_HZ=n +CONFIG_SMP=y +CONFIG_RCU_FANOUT=4 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v0.0/P3-3-T-nh-SD-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/P3-3-T-nh-SD-SMP-hp new file mode 100644 index 00000000000..b035e141bf2 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/P3-3-T-nh-SD-SMP-hp @@ -0,0 +1,20 @@ +CONFIG_RCU_TRACE=y +CONFIG_NO_HZ=n +CONFIG_SMP=y +CONFIG_RCU_FANOUT=2 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v0.0/P4-A-t-NH-sd-SMP-HP b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/P4-A-t-NH-sd-SMP-HP new file mode 100644 index 00000000000..3ccf6a9447f --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/P4-A-t-NH-sd-SMP-HP @@ -0,0 +1,22 @@ +CONFIG_RCU_TRACE=n +CONFIG_NO_HZ=y +CONFIG_SMP=y +CONFIG_RCU_FANOUT=6 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=y +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_RT_MUTEXES=y +CONFIG_RCU_BOOST=y +CONFIG_RCU_BOOST_PRIO=2 +CONFIG_PROVE_LOCKING=y +CONFIG_PROVE_RCU=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v0.0/P5-U-T-NH-sd-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/P5-U-T-NH-sd-SMP-hp new file mode 100644 index 00000000000..ef624ce73d8 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/P5-U-T-NH-sd-SMP-hp @@ -0,0 +1,28 @@ +CONFIG_RCU_TRACE=y +CONFIG_RCU_CPU_STALL_INFO=y +CONFIG_NO_HZ=y +CONFIG_SMP=y +CONFIG_RCU_FANOUT=6 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=y +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_DEBUG_KERNEL=y +CONFIG_PROVE_RCU_DELAY=y +CONFIG_DEBUG_OBJECTS=y +CONFIG_DEBUG_OBJECTS_RCU_HEAD=y +CONFIG_RT_MUTEXES=y +CONFIG_RCU_BOOST=y +CONFIG_RCU_BOOST_PRIO=2 +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v0.0/PT1-nh b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/PT1-nh new file mode 100644 index 00000000000..e3361c3894a --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/PT1-nh @@ -0,0 +1,23 @@ +CONFIG_TINY_PREEMPT_RCU=y +CONFIG_RCU_BOOST=y +CONFIG_RCU_BOOST_PRIO=2 +CONFIG_RCU_TRACE=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +# +CONFIG_SMP=n +# +CONFIG_HOTPLUG_CPU=n +# +CONFIG_NO_HZ=n +# +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v0.0/PT2-NH b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/PT2-NH new file mode 100644 index 00000000000..64abfc3b4d9 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/PT2-NH @@ -0,0 +1,22 @@ +CONFIG_TINY_PREEMPT_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +# +CONFIG_SMP=n +# +CONFIG_HOTPLUG_CPU=n +# +CONFIG_NO_HZ=y +# +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +CONFIG_PROVE_LOCKING=y +CONFIG_PROVE_RCU=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v0.0/ver_functions.sh b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/ver_functions.sh new file mode 100644 index 00000000000..5ace37a8978 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/ver_functions.sh @@ -0,0 +1,33 @@ +#!/bin/bash +# +# Kernel-version-dependent shell functions for the rest of the scripts. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, you can access it online at +# http://www.gnu.org/licenses/gpl-2.0.html. +# +# Copyright (C) IBM Corporation, 2013 +# +# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> + +# per_version_boot_params bootparam-string config-file seconds +# +# Adds per-version torture-module parameters to kernels supporting them. +# Which old kernels do not. +per_version_boot_params () { + echo rcutorture.stat_interval=15 \ + rcutorture.shutdown_secs=$3 \ + rcutorture.rcutorture_runnable=1 \ + rcutorture.test_no_idle_hz=1 \ + rcutorture.verbose=1 +} diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.12/CFLIST b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/CFLIST new file mode 100644 index 00000000000..da4cbc668f2 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/CFLIST @@ -0,0 +1,17 @@ +sysidleY.2013.06.19a +sysidleN.2013.06.19a +P1-S-T-NH-SD-SMP-HP +P2-2-t-nh-sd-SMP-hp +P3-3-T-nh-SD-SMP-hp +P4-A-t-NH-sd-SMP-HP +P5-U-T-NH-sd-SMP-hp +P6---t-nh-SD-smp-hp +N1-S-T-NH-SD-SMP-HP +N2-2-t-nh-sd-SMP-hp +N3-3-T-nh-SD-SMP-hp +N4-A-t-NH-sd-SMP-HP +N5-U-T-NH-sd-SMP-hp +PT1-nh +PT2-NH +NT1-nh +NT3-NH diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.12/N1-S-T-NH-SD-SMP-HP b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/N1-S-T-NH-SD-SMP-HP new file mode 100644 index 00000000000..d81e11d280a --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/N1-S-T-NH-SD-SMP-HP @@ -0,0 +1,19 @@ +CONFIG_RCU_TRACE=y +CONFIG_RCU_FAST_NO_HZ=y +CONFIG_NO_HZ=y +CONFIG_SMP=y +CONFIG_RCU_FANOUT=8 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=y +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +#CHECK#CONFIG_TREE_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.12/N2-2-t-nh-sd-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/N2-2-t-nh-sd-SMP-hp new file mode 100644 index 00000000000..02e418572b1 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/N2-2-t-nh-sd-SMP-hp @@ -0,0 +1,20 @@ +CONFIG_RCU_TRACE=n +CONFIG_NO_HZ=n +CONFIG_SMP=y +CONFIG_RCU_FANOUT=4 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +#CHECK#CONFIG_TREE_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.12/N3-3-T-nh-SD-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/N3-3-T-nh-SD-SMP-hp new file mode 100644 index 00000000000..b3100f69c8c --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/N3-3-T-nh-SD-SMP-hp @@ -0,0 +1,22 @@ +CONFIG_RCU_TRACE=y +CONFIG_NO_HZ=n +CONFIG_SMP=y +CONFIG_RCU_FANOUT=2 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +#CHECK#CONFIG_TREE_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_PROVE_LOCKING=y +CONFIG_PROVE_RCU=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.12/N4-A-t-NH-sd-SMP-HP b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/N4-A-t-NH-sd-SMP-HP new file mode 100644 index 00000000000..c56b4453072 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/N4-A-t-NH-sd-SMP-HP @@ -0,0 +1,18 @@ +CONFIG_RCU_TRACE=n +CONFIG_NO_HZ=y +CONFIG_SMP=y +CONFIG_RCU_FANOUT=6 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=y +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +#CHECK#CONFIG_TREE_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.12/N5-U-T-NH-sd-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/N5-U-T-NH-sd-SMP-hp new file mode 100644 index 00000000000..90d924fea9e --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/N5-U-T-NH-sd-SMP-hp @@ -0,0 +1,22 @@ +CONFIG_RCU_TRACE=y +CONFIG_DEBUG_KERNEL=y +CONFIG_RCU_CPU_STALL_INFO=y +CONFIG_NO_HZ=y +CONFIG_SMP=y +CONFIG_RCU_FANOUT=6 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=y +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +#CHECK#CONFIG_TREE_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.12/N6---t-nh-SD-smp-hp b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/N6---t-nh-SD-smp-hp new file mode 100644 index 00000000000..0ccc36d7273 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/N6---t-nh-SD-smp-hp @@ -0,0 +1,19 @@ +CONFIG_RCU_TRACE=n +CONFIG_NO_HZ=n +CONFIG_SMP=y +CONFIG_NR_CPUS=1 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +#CHECK#CONFIG_TREE_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.12/N7-4-T-NH-SD-SMP-HP b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/N7-4-T-NH-SD-SMP-HP new file mode 100644 index 00000000000..3f640cf8497 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/N7-4-T-NH-SD-SMP-HP @@ -0,0 +1,26 @@ +CONFIG_RCU_TRACE=y +CONFIG_DEBUG_KERNEL=y +CONFIG_RCU_CPU_STALL_INFO=y +CONFIG_NO_HZ=y +CONFIG_SMP=y +CONFIG_RCU_FANOUT=2 +CONFIG_NR_CPUS=16 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=y +CONFIG_RCU_NOCB_CPU=y +CONFIG_RCU_NOCB_CPU_NONE=y +CONFIG_RCU_NOCB_CPU_ZERO=n +CONFIG_RCU_NOCB_CPU_ALL=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +#CHECK#CONFIG_TREE_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.12/N8-2-T-NH-SD-SMP-HP b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/N8-2-T-NH-SD-SMP-HP new file mode 100644 index 00000000000..285da2dd8ac --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/N8-2-T-NH-SD-SMP-HP @@ -0,0 +1,22 @@ +CONFIG_RCU_TRACE=y +CONFIG_DEBUG_KERNEL=y +CONFIG_RCU_CPU_STALL_INFO=y +CONFIG_NO_HZ=y +CONFIG_SMP=y +CONFIG_RCU_FANOUT=14 +CONFIG_NR_CPUS=16 +CONFIG_RCU_FANOUT_EXACT=y +CONFIG_HOTPLUG_CPU=y +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +#CHECK#CONFIG_TREE_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.12/NT1-nh b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/NT1-nh new file mode 100644 index 00000000000..023f312a931 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/NT1-nh @@ -0,0 +1,23 @@ +#CHECK#CONFIG_TINY_RCU=y +CONFIG_RCU_TRACE=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +# +CONFIG_SMP=n +# +CONFIG_HOTPLUG_CPU=n +# +CONFIG_NO_HZ=n +# +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +CONFIG_PROVE_LOCKING=y +CONFIG_PROVE_RCU=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.12/NT3-NH b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/NT3-NH new file mode 100644 index 00000000000..6fd0235dae7 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/NT3-NH @@ -0,0 +1,20 @@ +#CHECK#CONFIG_TINY_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +# +CONFIG_SMP=n +# +CONFIG_HOTPLUG_CPU=n +# +CONFIG_NO_HZ=y +# +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P1-S-T-NH-SD-SMP-HP b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P1-S-T-NH-SD-SMP-HP new file mode 100644 index 00000000000..9647c44cf4b --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P1-S-T-NH-SD-SMP-HP @@ -0,0 +1,20 @@ +CONFIG_RCU_TRACE=y +CONFIG_RCU_CPU_STALL_INFO=y +CONFIG_NO_HZ=y +CONFIG_RCU_FAST_NO_HZ=y +CONFIG_SMP=y +CONFIG_RCU_FANOUT=8 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=y +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P2-2-t-nh-sd-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P2-2-t-nh-sd-SMP-hp new file mode 100644 index 00000000000..0f3b667d2a9 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P2-2-t-nh-sd-SMP-hp @@ -0,0 +1,20 @@ +CONFIG_RCU_TRACE=n +CONFIG_NO_HZ=n +CONFIG_SMP=y +CONFIG_RCU_FANOUT=4 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P3-3-T-nh-SD-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P3-3-T-nh-SD-SMP-hp new file mode 100644 index 00000000000..b035e141bf2 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P3-3-T-nh-SD-SMP-hp @@ -0,0 +1,20 @@ +CONFIG_RCU_TRACE=y +CONFIG_NO_HZ=n +CONFIG_SMP=y +CONFIG_RCU_FANOUT=2 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P4-A-t-NH-sd-SMP-HP b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P4-A-t-NH-sd-SMP-HP new file mode 100644 index 00000000000..3ccf6a9447f --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P4-A-t-NH-sd-SMP-HP @@ -0,0 +1,22 @@ +CONFIG_RCU_TRACE=n +CONFIG_NO_HZ=y +CONFIG_SMP=y +CONFIG_RCU_FANOUT=6 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=y +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_RT_MUTEXES=y +CONFIG_RCU_BOOST=y +CONFIG_RCU_BOOST_PRIO=2 +CONFIG_PROVE_LOCKING=y +CONFIG_PROVE_RCU=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P5-U-T-NH-sd-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P5-U-T-NH-sd-SMP-hp new file mode 100644 index 00000000000..ef624ce73d8 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P5-U-T-NH-sd-SMP-hp @@ -0,0 +1,28 @@ +CONFIG_RCU_TRACE=y +CONFIG_RCU_CPU_STALL_INFO=y +CONFIG_NO_HZ=y +CONFIG_SMP=y +CONFIG_RCU_FANOUT=6 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=y +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_DEBUG_KERNEL=y +CONFIG_PROVE_RCU_DELAY=y +CONFIG_DEBUG_OBJECTS=y +CONFIG_DEBUG_OBJECTS_RCU_HEAD=y +CONFIG_RT_MUTEXES=y +CONFIG_RCU_BOOST=y +CONFIG_RCU_BOOST_PRIO=2 +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P6---t-nh-SD-smp-hp b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P6---t-nh-SD-smp-hp new file mode 100644 index 00000000000..f4c9175828b --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P6---t-nh-SD-smp-hp @@ -0,0 +1,18 @@ +CONFIG_RCU_TRACE=n +CONFIG_NO_HZ=n +CONFIG_SMP=n +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +CONFIG_TREE_PREEMPT_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P7-4-T-NH-SD-SMP-HP b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P7-4-T-NH-SD-SMP-HP new file mode 100644 index 00000000000..77a8c5b7576 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P7-4-T-NH-SD-SMP-HP @@ -0,0 +1,30 @@ +CONFIG_RCU_TRACE=y +CONFIG_NO_HZ=y +CONFIG_SMP=y +CONFIG_RCU_FANOUT=2 +CONFIG_NR_CPUS=16 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=y +CONFIG_RCU_NOCB_CPU=y +CONFIG_RCU_NOCB_CPU_NONE=n +CONFIG_RCU_NOCB_CPU_ZERO=n +CONFIG_RCU_NOCB_CPU_ALL=y +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_PROVE_LOCKING=y +CONFIG_PROVE_RCU=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_OBJECTS=y +CONFIG_DEBUG_OBJECTS_RCU_HEAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_SLUB=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P7-4-T-NH-SD-SMP-HP-all b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P7-4-T-NH-SD-SMP-HP-all new file mode 100644 index 00000000000..0eecebc6e95 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P7-4-T-NH-SD-SMP-HP-all @@ -0,0 +1,30 @@ +CONFIG_RCU_TRACE=y +CONFIG_NO_HZ=y +CONFIG_SMP=y +CONFIG_RCU_FANOUT=2 +CONFIG_NR_CPUS=16 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=y +CONFIG_RCU_NOCB_CPU=y +CONFIG_RCU_NOCB_CPU_NONE=y +CONFIG_RCU_NOCB_CPU_ZERO=n +CONFIG_RCU_NOCB_CPU_ALL=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_PROVE_LOCKING=y +CONFIG_PROVE_RCU=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_OBJECTS=y +CONFIG_DEBUG_OBJECTS_RCU_HEAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_SLUB=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P7-4-T-NH-SD-SMP-HP-none b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P7-4-T-NH-SD-SMP-HP-none new file mode 100644 index 00000000000..0eecebc6e95 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P7-4-T-NH-SD-SMP-HP-none @@ -0,0 +1,30 @@ +CONFIG_RCU_TRACE=y +CONFIG_NO_HZ=y +CONFIG_SMP=y +CONFIG_RCU_FANOUT=2 +CONFIG_NR_CPUS=16 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=y +CONFIG_RCU_NOCB_CPU=y +CONFIG_RCU_NOCB_CPU_NONE=y +CONFIG_RCU_NOCB_CPU_ZERO=n +CONFIG_RCU_NOCB_CPU_ALL=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_PROVE_LOCKING=y +CONFIG_PROVE_RCU=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_OBJECTS=y +CONFIG_DEBUG_OBJECTS_RCU_HEAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_SLUB=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P7-4-T-NH-SD-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P7-4-T-NH-SD-SMP-hp new file mode 100644 index 00000000000..588bc70420c --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P7-4-T-NH-SD-SMP-hp @@ -0,0 +1,30 @@ +CONFIG_RCU_TRACE=y +CONFIG_NO_HZ=y +CONFIG_SMP=y +CONFIG_RCU_FANOUT=2 +CONFIG_NR_CPUS=16 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=n +CONFIG_RCU_NOCB_CPU=y +CONFIG_RCU_NOCB_CPU_NONE=n +CONFIG_RCU_NOCB_CPU_ZERO=y +CONFIG_RCU_NOCB_CPU_ALL=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_PROVE_LOCKING=y +CONFIG_PROVE_RCU=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_OBJECTS=y +CONFIG_DEBUG_OBJECTS_RCU_HEAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_SLUB=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.12/PT1-nh b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/PT1-nh new file mode 100644 index 00000000000..e3361c3894a --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/PT1-nh @@ -0,0 +1,23 @@ +CONFIG_TINY_PREEMPT_RCU=y +CONFIG_RCU_BOOST=y +CONFIG_RCU_BOOST_PRIO=2 +CONFIG_RCU_TRACE=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +# +CONFIG_SMP=n +# +CONFIG_HOTPLUG_CPU=n +# +CONFIG_NO_HZ=n +# +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.12/PT2-NH b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/PT2-NH new file mode 100644 index 00000000000..64abfc3b4d9 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/PT2-NH @@ -0,0 +1,22 @@ +CONFIG_TINY_PREEMPT_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +# +CONFIG_SMP=n +# +CONFIG_HOTPLUG_CPU=n +# +CONFIG_NO_HZ=y +# +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +CONFIG_PROVE_LOCKING=y +CONFIG_PROVE_RCU=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.3/CFLIST b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/CFLIST new file mode 100644 index 00000000000..18223947bbc --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/CFLIST @@ -0,0 +1,14 @@ +P1-S-T-NH-SD-SMP-HP +P2-2-t-nh-sd-SMP-hp +P3-3-T-nh-SD-SMP-hp +P4-A-t-NH-sd-SMP-HP +P5-U-T-NH-sd-SMP-hp +N1-S-T-NH-SD-SMP-HP +N2-2-t-nh-sd-SMP-hp +N3-3-T-nh-SD-SMP-hp +N4-A-t-NH-sd-SMP-HP +N5-U-T-NH-sd-SMP-hp +PT1-nh +PT2-NH +NT1-nh +NT3-NH diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.3/N1-S-T-NH-SD-SMP-HP b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/N1-S-T-NH-SD-SMP-HP new file mode 100644 index 00000000000..d81e11d280a --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/N1-S-T-NH-SD-SMP-HP @@ -0,0 +1,19 @@ +CONFIG_RCU_TRACE=y +CONFIG_RCU_FAST_NO_HZ=y +CONFIG_NO_HZ=y +CONFIG_SMP=y +CONFIG_RCU_FANOUT=8 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=y +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +#CHECK#CONFIG_TREE_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.3/N2-2-t-nh-sd-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/N2-2-t-nh-sd-SMP-hp new file mode 100644 index 00000000000..02e418572b1 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/N2-2-t-nh-sd-SMP-hp @@ -0,0 +1,20 @@ +CONFIG_RCU_TRACE=n +CONFIG_NO_HZ=n +CONFIG_SMP=y +CONFIG_RCU_FANOUT=4 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +#CHECK#CONFIG_TREE_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.3/N3-3-T-nh-SD-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/N3-3-T-nh-SD-SMP-hp new file mode 100644 index 00000000000..b3100f69c8c --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/N3-3-T-nh-SD-SMP-hp @@ -0,0 +1,22 @@ +CONFIG_RCU_TRACE=y +CONFIG_NO_HZ=n +CONFIG_SMP=y +CONFIG_RCU_FANOUT=2 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +#CHECK#CONFIG_TREE_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_PROVE_LOCKING=y +CONFIG_PROVE_RCU=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.3/N4-A-t-NH-sd-SMP-HP b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/N4-A-t-NH-sd-SMP-HP new file mode 100644 index 00000000000..c56b4453072 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/N4-A-t-NH-sd-SMP-HP @@ -0,0 +1,18 @@ +CONFIG_RCU_TRACE=n +CONFIG_NO_HZ=y +CONFIG_SMP=y +CONFIG_RCU_FANOUT=6 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=y +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +#CHECK#CONFIG_TREE_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.3/N5-U-T-NH-sd-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/N5-U-T-NH-sd-SMP-hp new file mode 100644 index 00000000000..90d924fea9e --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/N5-U-T-NH-sd-SMP-hp @@ -0,0 +1,22 @@ +CONFIG_RCU_TRACE=y +CONFIG_DEBUG_KERNEL=y +CONFIG_RCU_CPU_STALL_INFO=y +CONFIG_NO_HZ=y +CONFIG_SMP=y +CONFIG_RCU_FANOUT=6 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=y +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +#CHECK#CONFIG_TREE_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.3/NT1-nh b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/NT1-nh new file mode 100644 index 00000000000..023f312a931 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/NT1-nh @@ -0,0 +1,23 @@ +#CHECK#CONFIG_TINY_RCU=y +CONFIG_RCU_TRACE=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +# +CONFIG_SMP=n +# +CONFIG_HOTPLUG_CPU=n +# +CONFIG_NO_HZ=n +# +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +CONFIG_PROVE_LOCKING=y +CONFIG_PROVE_RCU=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.3/NT3-NH b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/NT3-NH new file mode 100644 index 00000000000..6fd0235dae7 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/NT3-NH @@ -0,0 +1,20 @@ +#CHECK#CONFIG_TINY_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +# +CONFIG_SMP=n +# +CONFIG_HOTPLUG_CPU=n +# +CONFIG_NO_HZ=y +# +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.3/P1-S-T-NH-SD-SMP-HP b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/P1-S-T-NH-SD-SMP-HP new file mode 100644 index 00000000000..9647c44cf4b --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/P1-S-T-NH-SD-SMP-HP @@ -0,0 +1,20 @@ +CONFIG_RCU_TRACE=y +CONFIG_RCU_CPU_STALL_INFO=y +CONFIG_NO_HZ=y +CONFIG_RCU_FAST_NO_HZ=y +CONFIG_SMP=y +CONFIG_RCU_FANOUT=8 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=y +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.3/P2-2-t-nh-sd-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/P2-2-t-nh-sd-SMP-hp new file mode 100644 index 00000000000..0f3b667d2a9 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/P2-2-t-nh-sd-SMP-hp @@ -0,0 +1,20 @@ +CONFIG_RCU_TRACE=n +CONFIG_NO_HZ=n +CONFIG_SMP=y +CONFIG_RCU_FANOUT=4 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.3/P3-3-T-nh-SD-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/P3-3-T-nh-SD-SMP-hp new file mode 100644 index 00000000000..b035e141bf2 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/P3-3-T-nh-SD-SMP-hp @@ -0,0 +1,20 @@ +CONFIG_RCU_TRACE=y +CONFIG_NO_HZ=n +CONFIG_SMP=y +CONFIG_RCU_FANOUT=2 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.3/P4-A-t-NH-sd-SMP-HP b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/P4-A-t-NH-sd-SMP-HP new file mode 100644 index 00000000000..3ccf6a9447f --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/P4-A-t-NH-sd-SMP-HP @@ -0,0 +1,22 @@ +CONFIG_RCU_TRACE=n +CONFIG_NO_HZ=y +CONFIG_SMP=y +CONFIG_RCU_FANOUT=6 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=y +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_RT_MUTEXES=y +CONFIG_RCU_BOOST=y +CONFIG_RCU_BOOST_PRIO=2 +CONFIG_PROVE_LOCKING=y +CONFIG_PROVE_RCU=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.3/P5-U-T-NH-sd-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/P5-U-T-NH-sd-SMP-hp new file mode 100644 index 00000000000..ef624ce73d8 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/P5-U-T-NH-sd-SMP-hp @@ -0,0 +1,28 @@ +CONFIG_RCU_TRACE=y +CONFIG_RCU_CPU_STALL_INFO=y +CONFIG_NO_HZ=y +CONFIG_SMP=y +CONFIG_RCU_FANOUT=6 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=y +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_DEBUG_KERNEL=y +CONFIG_PROVE_RCU_DELAY=y +CONFIG_DEBUG_OBJECTS=y +CONFIG_DEBUG_OBJECTS_RCU_HEAD=y +CONFIG_RT_MUTEXES=y +CONFIG_RCU_BOOST=y +CONFIG_RCU_BOOST_PRIO=2 +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.3/PT1-nh b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/PT1-nh new file mode 100644 index 00000000000..e3361c3894a --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/PT1-nh @@ -0,0 +1,23 @@ +CONFIG_TINY_PREEMPT_RCU=y +CONFIG_RCU_BOOST=y +CONFIG_RCU_BOOST_PRIO=2 +CONFIG_RCU_TRACE=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +# +CONFIG_SMP=n +# +CONFIG_HOTPLUG_CPU=n +# +CONFIG_NO_HZ=n +# +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.3/PT2-NH b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/PT2-NH new file mode 100644 index 00000000000..64abfc3b4d9 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/PT2-NH @@ -0,0 +1,22 @@ +CONFIG_TINY_PREEMPT_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +# +CONFIG_SMP=n +# +CONFIG_HOTPLUG_CPU=n +# +CONFIG_NO_HZ=y +# +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +CONFIG_PROVE_LOCKING=y +CONFIG_PROVE_RCU=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.3/ver_functions.sh b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/ver_functions.sh new file mode 100644 index 00000000000..bae55692ce6 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/ver_functions.sh @@ -0,0 +1,44 @@ +#!/bin/bash +# +# Kernel-version-dependent shell functions for the rest of the scripts. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, you can access it online at +# http://www.gnu.org/licenses/gpl-2.0.html. +# +# Copyright (C) IBM Corporation, 2013 +# +# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> + +# rcutorture_param_onoff bootparam-string config-file +# +# Adds onoff rcutorture module parameters to kernels having it. +rcutorture_param_onoff () { + if ! bootparam_hotplug_cpu "$1" && configfrag_hotplug_cpu "$2" + then + echo CPU-hotplug kernel, adding rcutorture onoff. 1>&2 + echo rcutorture.onoff_interval=3 rcutorture.onoff_holdoff=30 + fi +} + +# per_version_boot_params bootparam-string config-file seconds +# +# Adds per-version torture-module parameters to kernels supporting them. +per_version_boot_params () { + echo $1 `rcutorture_param_onoff "$1" "$2"` \ + rcutorture.stat_interval=15 \ + rcutorture.shutdown_secs=$3 \ + rcutorture.rcutorture_runnable=1 \ + rcutorture.test_no_idle_hz=1 \ + rcutorture.verbose=1 +} diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.5/CFLIST b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/CFLIST new file mode 100644 index 00000000000..18223947bbc --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/CFLIST @@ -0,0 +1,14 @@ +P1-S-T-NH-SD-SMP-HP +P2-2-t-nh-sd-SMP-hp +P3-3-T-nh-SD-SMP-hp +P4-A-t-NH-sd-SMP-HP +P5-U-T-NH-sd-SMP-hp +N1-S-T-NH-SD-SMP-HP +N2-2-t-nh-sd-SMP-hp +N3-3-T-nh-SD-SMP-hp +N4-A-t-NH-sd-SMP-HP +N5-U-T-NH-sd-SMP-hp +PT1-nh +PT2-NH +NT1-nh +NT3-NH diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.5/N1-S-T-NH-SD-SMP-HP b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/N1-S-T-NH-SD-SMP-HP new file mode 100644 index 00000000000..d81e11d280a --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/N1-S-T-NH-SD-SMP-HP @@ -0,0 +1,19 @@ +CONFIG_RCU_TRACE=y +CONFIG_RCU_FAST_NO_HZ=y +CONFIG_NO_HZ=y +CONFIG_SMP=y +CONFIG_RCU_FANOUT=8 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=y +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +#CHECK#CONFIG_TREE_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.5/N2-2-t-nh-sd-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/N2-2-t-nh-sd-SMP-hp new file mode 100644 index 00000000000..02e418572b1 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/N2-2-t-nh-sd-SMP-hp @@ -0,0 +1,20 @@ +CONFIG_RCU_TRACE=n +CONFIG_NO_HZ=n +CONFIG_SMP=y +CONFIG_RCU_FANOUT=4 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +#CHECK#CONFIG_TREE_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.5/N3-3-T-nh-SD-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/N3-3-T-nh-SD-SMP-hp new file mode 100644 index 00000000000..b3100f69c8c --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/N3-3-T-nh-SD-SMP-hp @@ -0,0 +1,22 @@ +CONFIG_RCU_TRACE=y +CONFIG_NO_HZ=n +CONFIG_SMP=y +CONFIG_RCU_FANOUT=2 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +#CHECK#CONFIG_TREE_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_PROVE_LOCKING=y +CONFIG_PROVE_RCU=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.5/N4-A-t-NH-sd-SMP-HP b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/N4-A-t-NH-sd-SMP-HP new file mode 100644 index 00000000000..c56b4453072 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/N4-A-t-NH-sd-SMP-HP @@ -0,0 +1,18 @@ +CONFIG_RCU_TRACE=n +CONFIG_NO_HZ=y +CONFIG_SMP=y +CONFIG_RCU_FANOUT=6 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=y +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +#CHECK#CONFIG_TREE_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.5/N5-U-T-NH-sd-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/N5-U-T-NH-sd-SMP-hp new file mode 100644 index 00000000000..90d924fea9e --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/N5-U-T-NH-sd-SMP-hp @@ -0,0 +1,22 @@ +CONFIG_RCU_TRACE=y +CONFIG_DEBUG_KERNEL=y +CONFIG_RCU_CPU_STALL_INFO=y +CONFIG_NO_HZ=y +CONFIG_SMP=y +CONFIG_RCU_FANOUT=6 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=y +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +#CHECK#CONFIG_TREE_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.5/NT1-nh b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/NT1-nh new file mode 100644 index 00000000000..023f312a931 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/NT1-nh @@ -0,0 +1,23 @@ +#CHECK#CONFIG_TINY_RCU=y +CONFIG_RCU_TRACE=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +# +CONFIG_SMP=n +# +CONFIG_HOTPLUG_CPU=n +# +CONFIG_NO_HZ=n +# +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +CONFIG_PROVE_LOCKING=y +CONFIG_PROVE_RCU=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.5/NT3-NH b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/NT3-NH new file mode 100644 index 00000000000..6fd0235dae7 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/NT3-NH @@ -0,0 +1,20 @@ +#CHECK#CONFIG_TINY_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +# +CONFIG_SMP=n +# +CONFIG_HOTPLUG_CPU=n +# +CONFIG_NO_HZ=y +# +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.5/P1-S-T-NH-SD-SMP-HP b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/P1-S-T-NH-SD-SMP-HP new file mode 100644 index 00000000000..9647c44cf4b --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/P1-S-T-NH-SD-SMP-HP @@ -0,0 +1,20 @@ +CONFIG_RCU_TRACE=y +CONFIG_RCU_CPU_STALL_INFO=y +CONFIG_NO_HZ=y +CONFIG_RCU_FAST_NO_HZ=y +CONFIG_SMP=y +CONFIG_RCU_FANOUT=8 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=y +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.5/P2-2-t-nh-sd-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/P2-2-t-nh-sd-SMP-hp new file mode 100644 index 00000000000..0f3b667d2a9 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/P2-2-t-nh-sd-SMP-hp @@ -0,0 +1,20 @@ +CONFIG_RCU_TRACE=n +CONFIG_NO_HZ=n +CONFIG_SMP=y +CONFIG_RCU_FANOUT=4 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.5/P3-3-T-nh-SD-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/P3-3-T-nh-SD-SMP-hp new file mode 100644 index 00000000000..b035e141bf2 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/P3-3-T-nh-SD-SMP-hp @@ -0,0 +1,20 @@ +CONFIG_RCU_TRACE=y +CONFIG_NO_HZ=n +CONFIG_SMP=y +CONFIG_RCU_FANOUT=2 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.5/P4-A-t-NH-sd-SMP-HP b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/P4-A-t-NH-sd-SMP-HP new file mode 100644 index 00000000000..3ccf6a9447f --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/P4-A-t-NH-sd-SMP-HP @@ -0,0 +1,22 @@ +CONFIG_RCU_TRACE=n +CONFIG_NO_HZ=y +CONFIG_SMP=y +CONFIG_RCU_FANOUT=6 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_HOTPLUG_CPU=y +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_RT_MUTEXES=y +CONFIG_RCU_BOOST=y +CONFIG_RCU_BOOST_PRIO=2 +CONFIG_PROVE_LOCKING=y +CONFIG_PROVE_RCU=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.5/P5-U-T-NH-sd-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/P5-U-T-NH-sd-SMP-hp new file mode 100644 index 00000000000..ef624ce73d8 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/P5-U-T-NH-sd-SMP-hp @@ -0,0 +1,28 @@ +CONFIG_RCU_TRACE=y +CONFIG_RCU_CPU_STALL_INFO=y +CONFIG_NO_HZ=y +CONFIG_SMP=y +CONFIG_RCU_FANOUT=6 +CONFIG_NR_CPUS=8 +CONFIG_RCU_FANOUT_EXACT=y +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_DEBUG_KERNEL=y +CONFIG_PROVE_RCU_DELAY=y +CONFIG_DEBUG_OBJECTS=y +CONFIG_DEBUG_OBJECTS_RCU_HEAD=y +CONFIG_RT_MUTEXES=y +CONFIG_RCU_BOOST=y +CONFIG_RCU_BOOST_PRIO=2 +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.5/PT1-nh b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/PT1-nh new file mode 100644 index 00000000000..e3361c3894a --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/PT1-nh @@ -0,0 +1,23 @@ +CONFIG_TINY_PREEMPT_RCU=y +CONFIG_RCU_BOOST=y +CONFIG_RCU_BOOST_PRIO=2 +CONFIG_RCU_TRACE=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +# +CONFIG_SMP=n +# +CONFIG_HOTPLUG_CPU=n +# +CONFIG_NO_HZ=n +# +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.5/PT2-NH b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/PT2-NH new file mode 100644 index 00000000000..64abfc3b4d9 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/PT2-NH @@ -0,0 +1,22 @@ +CONFIG_TINY_PREEMPT_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_MODULE_UNLOAD=y +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +# +CONFIG_SMP=n +# +CONFIG_HOTPLUG_CPU=n +# +CONFIG_NO_HZ=y +# +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +CONFIG_PROVE_LOCKING=y +CONFIG_PROVE_RCU=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_PRINTK_TIME=y + diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.5/ver_functions.sh b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/ver_functions.sh new file mode 100644 index 00000000000..8977d8d31b1 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/ver_functions.sh @@ -0,0 +1,57 @@ +#!/bin/bash +# +# Kernel-version-dependent shell functions for the rest of the scripts. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, you can access it online at +# http://www.gnu.org/licenses/gpl-2.0.html. +# +# Copyright (C) IBM Corporation, 2013 +# +# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> + +# rcutorture_param_n_barrier_cbs bootparam-string +# +# Adds n_barrier_cbs rcutorture module parameter to kernels having it. +rcutorture_param_n_barrier_cbs () { + if echo $1 | grep -q "rcutorture\.n_barrier_cbs" + then + : + else + echo rcutorture.n_barrier_cbs=4 + fi +} + +# rcutorture_param_onoff bootparam-string config-file +# +# Adds onoff rcutorture module parameters to kernels having it. +rcutorture_param_onoff () { + if ! bootparam_hotplug_cpu "$1" && configfrag_hotplug_cpu "$2" + then + echo CPU-hotplug kernel, adding rcutorture onoff. 1>&2 + echo rcutorture.onoff_interval=3 rcutorture.onoff_holdoff=30 + fi +} + +# per_version_boot_params bootparam-string config-file seconds +# +# Adds per-version torture-module parameters to kernels supporting them. +per_version_boot_params () { + echo $1 `rcutorture_param_onoff "$1" "$2"` \ + `rcutorture_param_n_barrier_cbs "$1"` \ + rcutorture.stat_interval=15 \ + rcutorture.shutdown_secs=$3 \ + rcutorture.rcutorture_runnable=1 \ + rcutorture.test_no_idle_hz=1 \ + rcutorture.verbose=1 +} diff --git a/tools/testing/selftests/rcutorture/configs/rcu/ver_functions.sh b/tools/testing/selftests/rcutorture/configs/rcu/ver_functions.sh new file mode 100644 index 00000000000..8977d8d31b1 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/ver_functions.sh @@ -0,0 +1,57 @@ +#!/bin/bash +# +# Kernel-version-dependent shell functions for the rest of the scripts. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, you can access it online at +# http://www.gnu.org/licenses/gpl-2.0.html. +# +# Copyright (C) IBM Corporation, 2013 +# +# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> + +# rcutorture_param_n_barrier_cbs bootparam-string +# +# Adds n_barrier_cbs rcutorture module parameter to kernels having it. +rcutorture_param_n_barrier_cbs () { + if echo $1 | grep -q "rcutorture\.n_barrier_cbs" + then + : + else + echo rcutorture.n_barrier_cbs=4 + fi +} + +# rcutorture_param_onoff bootparam-string config-file +# +# Adds onoff rcutorture module parameters to kernels having it. +rcutorture_param_onoff () { + if ! bootparam_hotplug_cpu "$1" && configfrag_hotplug_cpu "$2" + then + echo CPU-hotplug kernel, adding rcutorture onoff. 1>&2 + echo rcutorture.onoff_interval=3 rcutorture.onoff_holdoff=30 + fi +} + +# per_version_boot_params bootparam-string config-file seconds +# +# Adds per-version torture-module parameters to kernels supporting them. +per_version_boot_params () { + echo $1 `rcutorture_param_onoff "$1" "$2"` \ + `rcutorture_param_n_barrier_cbs "$1"` \ + rcutorture.stat_interval=15 \ + rcutorture.shutdown_secs=$3 \ + rcutorture.rcutorture_runnable=1 \ + rcutorture.test_no_idle_hz=1 \ + rcutorture.verbose=1 +} diff --git a/tools/testing/selftests/rcutorture/doc/TINY_RCU.txt b/tools/testing/selftests/rcutorture/doc/TINY_RCU.txt new file mode 100644 index 00000000000..28db67b54e5 --- /dev/null +++ b/tools/testing/selftests/rcutorture/doc/TINY_RCU.txt @@ -0,0 +1,40 @@ +This document gives a brief rationale for the TINY_RCU test cases. + + +Kconfig Parameters: + +CONFIG_DEBUG_LOCK_ALLOC -- Do all three and none of the three. +CONFIG_PREEMPT_COUNT +CONFIG_RCU_TRACE + +The theory here is that randconfig testing will hit the other six possible +combinations of these parameters. + + +Kconfig Parameters Ignored: + +CONFIG_DEBUG_OBJECTS_RCU_HEAD +CONFIG_PROVE_RCU + + In common code tested by TREE_RCU test cases. + +CONFIG_NO_HZ_FULL_SYSIDLE +CONFIG_RCU_NOCB_CPU +CONFIG_RCU_USER_QS + + Meaningless for TINY_RCU. + +CONFIG_RCU_STALL_COMMON +CONFIG_RCU_TORTURE_TEST + + Redundant with CONFIG_RCU_TRACE. + +CONFIG_HOTPLUG_CPU +CONFIG_PREEMPT +CONFIG_PREEMPT_RCU +CONFIG_SMP +CONFIG_TINY_RCU +CONFIG_TREE_PREEMPT_RCU +CONFIG_TREE_RCU + + All forced by CONFIG_TINY_RCU. diff --git a/tools/testing/selftests/rcutorture/doc/TREE_RCU-kconfig.txt b/tools/testing/selftests/rcutorture/doc/TREE_RCU-kconfig.txt new file mode 100644 index 00000000000..adbb76cffb4 --- /dev/null +++ b/tools/testing/selftests/rcutorture/doc/TREE_RCU-kconfig.txt @@ -0,0 +1,95 @@ +This document gives a brief rationale for the TREE_RCU-related test +cases, a group that includes TREE_PREEMPT_RCU. + + +Kconfig Parameters: + +CONFIG_DEBUG_LOCK_ALLOC -- Do three, covering CONFIG_PROVE_LOCKING & not. +CONFIG_DEBUG_OBJECTS_RCU_HEAD -- Do one. +CONFIG_HOTPLUG_CPU -- Do half. (Every second.) +CONFIG_HZ_PERIODIC -- Do one. +CONFIG_NO_HZ_IDLE -- Do those not otherwise specified. (Groups of two.) +CONFIG_NO_HZ_FULL -- Do two, one with CONFIG_NO_HZ_FULL_SYSIDLE. +CONFIG_NO_HZ_FULL_SYSIDLE -- Do one. +CONFIG_PREEMPT -- Do half. (First three and #8.) +CONFIG_PROVE_LOCKING -- Do all but two, covering CONFIG_PROVE_RCU and not. +CONFIG_PROVE_RCU -- Do all but one under CONFIG_PROVE_LOCKING. +CONFIG_PROVE_RCU_DELAY -- Do one. +CONFIG_RCU_BOOST -- one of TREE_PREEMPT_RCU. +CONFIG_RCU_BOOST_PRIO -- set to 2 for _BOOST testing. +CONFIG_RCU_CPU_STALL_INFO -- do one with and without _VERBOSE. +CONFIG_RCU_CPU_STALL_VERBOSE -- do one with and without _INFO. +CONFIG_RCU_FANOUT -- Cover hierarchy as currently, but overlap with others. +CONFIG_RCU_FANOUT_EXACT -- Do one. +CONFIG_RCU_FANOUT_LEAF -- Do one non-default. +CONFIG_RCU_FAST_NO_HZ -- Do one, but not with CONFIG_RCU_NOCB_CPU_ALL. +CONFIG_RCU_NOCB_CPU -- Do three, see below. +CONFIG_RCU_NOCB_CPU_ALL -- Do one. +CONFIG_RCU_NOCB_CPU_NONE -- Do one. +CONFIG_RCU_NOCB_CPU_ZERO -- Do one. +CONFIG_RCU_TRACE -- Do half. +CONFIG_SMP -- Need one !SMP for TREE_PREEMPT_RCU. +RCU-bh: Do one with PREEMPT and one with !PREEMPT. +RCU-sched: Do one with PREEMPT but not BOOST. + + +Hierarchy: + +TREE01. CONFIG_NR_CPUS=8, CONFIG_RCU_FANOUT=8, CONFIG_RCU_FANOUT_EXACT=n. +TREE02. CONFIG_NR_CPUS=8, CONFIG_RCU_FANOUT=3, CONFIG_RCU_FANOUT_EXACT=n, + CONFIG_RCU_FANOUT_LEAF=3. +TREE03. CONFIG_NR_CPUS=8, CONFIG_RCU_FANOUT=4, CONFIG_RCU_FANOUT_EXACT=n, + CONFIG_RCU_FANOUT_LEAF=4. +TREE04. CONFIG_NR_CPUS=8, CONFIG_RCU_FANOUT=2, CONFIG_RCU_FANOUT_EXACT=n, + CONFIG_RCU_FANOUT_LEAF=2. +TREE05. CONFIG_NR_CPUS=8, CONFIG_RCU_FANOUT=6, CONFIG_RCU_FANOUT_EXACT=n + CONFIG_RCU_FANOUT_LEAF=6. +TREE06. CONFIG_NR_CPUS=8, CONFIG_RCU_FANOUT=6, CONFIG_RCU_FANOUT_EXACT=y + CONFIG_RCU_FANOUT_LEAF=6. +TREE07. CONFIG_NR_CPUS=16, CONFIG_RCU_FANOUT=2, CONFIG_RCU_FANOUT_EXACT=n, + CONFIG_RCU_FANOUT_LEAF=2. +TREE08. CONFIG_NR_CPUS=16, CONFIG_RCU_FANOUT=3, CONFIG_RCU_FANOUT_EXACT=y, + CONFIG_RCU_FANOUT_LEAF=2. +TREE09. CONFIG_NR_CPUS=1. + + +Kconfig Parameters Ignored: + +CONFIG_64BIT + + Used only to check CONFIG_RCU_FANOUT value, inspection suffices. + +CONFIG_NO_HZ_FULL_SYSIDLE_SMALL + + Defer until Frederic uses this. + +CONFIG_PREEMPT_COUNT +CONFIG_PREEMPT_RCU + + Redundant with CONFIG_PREEMPT, ignore. + +CONFIG_RCU_BOOST_DELAY + + Inspection suffices, ignore. + +CONFIG_RCU_CPU_STALL_TIMEOUT + + Inspection suffices, ignore. + +CONFIG_RCU_STALL_COMMON + + Implied by TREE_RCU and TREE_PREEMPT_RCU. + +CONFIG_RCU_TORTURE_TEST +CONFIG_RCU_TORTURE_TEST_RUNNABLE + + Always used in KVM testing. + +CONFIG_RCU_USER_QS + + Redundant with CONFIG_NO_HZ_FULL. + +CONFIG_TREE_PREEMPT_RCU +CONFIG_TREE_RCU + + These are controlled by CONFIG_PREEMPT. diff --git a/tools/testing/selftests/rcutorture/doc/initrd.txt b/tools/testing/selftests/rcutorture/doc/initrd.txt new file mode 100644 index 00000000000..49d134c25c0 --- /dev/null +++ b/tools/testing/selftests/rcutorture/doc/initrd.txt @@ -0,0 +1,90 @@ +This document describes one way to create the initrd directory hierarchy +in order to allow an initrd to be built into your kernel. The trick +here is to steal the initrd file used on your Linux laptop, Ubuntu in +this case. There are probably much better ways of doing this. + +That said, here are the commands: + +------------------------------------------------------------------------ +zcat /initrd.img > /tmp/initrd.img.zcat +mkdir initrd +cd initrd +cpio -id < /tmp/initrd.img.zcat +------------------------------------------------------------------------ + +Interestingly enough, if you are running rcutorture, you don't really +need userspace in many cases. Running without userspace has the +advantage of allowing you to test your kernel independently of the +distro in place, the root-filesystem layout, and so on. To make this +happen, put the following script in the initrd's tree's "/init" file, +with 0755 mode. + +------------------------------------------------------------------------ +#!/bin/sh + +[ -d /dev ] || mkdir -m 0755 /dev +[ -d /root ] || mkdir -m 0700 /root +[ -d /sys ] || mkdir /sys +[ -d /proc ] || mkdir /proc +[ -d /tmp ] || mkdir /tmp +mkdir -p /var/lock +mount -t sysfs -o nodev,noexec,nosuid sysfs /sys +mount -t proc -o nodev,noexec,nosuid proc /proc +# Some things don't work properly without /etc/mtab. +ln -sf /proc/mounts /etc/mtab + +# Note that this only becomes /dev on the real filesystem if udev's scripts +# are used; which they will be, but it's worth pointing out +if ! mount -t devtmpfs -o mode=0755 udev /dev; then + echo "W: devtmpfs not available, falling back to tmpfs for /dev" + mount -t tmpfs -o mode=0755 udev /dev + [ -e /dev/console ] || mknod --mode=600 /dev/console c 5 1 + [ -e /dev/kmsg ] || mknod --mode=644 /dev/kmsg c 1 11 + [ -e /dev/null ] || mknod --mode=666 /dev/null c 1 3 +fi + +mkdir /dev/pts +mount -t devpts -o noexec,nosuid,gid=5,mode=0620 devpts /dev/pts || true +mount -t tmpfs -o "nosuid,size=20%,mode=0755" tmpfs /run +mkdir /run/initramfs +# compatibility symlink for the pre-oneiric locations +ln -s /run/initramfs /dev/.initramfs + +# Export relevant variables +export ROOT= +export ROOTDELAY= +export ROOTFLAGS= +export ROOTFSTYPE= +export IP= +export BOOT= +export BOOTIF= +export UBIMTD= +export break= +export init=/sbin/init +export quiet=n +export readonly=y +export rootmnt=/root +export debug= +export panic= +export blacklist= +export resume= +export resume_offset= +export recovery= + +for i in /sys/devices/system/cpu/cpu*/online +do + case $i in + '/sys/devices/system/cpu/cpu0/online') + ;; + '/sys/devices/system/cpu/cpu*/online') + ;; + *) + echo 1 > $i + ;; + esac +done + +while : +do + sleep 10 +done diff --git a/tools/testing/selftests/rcutorture/doc/rcu-test-image.txt b/tools/testing/selftests/rcutorture/doc/rcu-test-image.txt new file mode 100644 index 00000000000..66efb59a1bd --- /dev/null +++ b/tools/testing/selftests/rcutorture/doc/rcu-test-image.txt @@ -0,0 +1,42 @@ +This document describes one way to created the rcu-test-image file +that contains the filesystem used by the guest-OS kernel. There are +probably much better ways of doing this, and this filesystem could no +doubt be smaller. It is probably also possible to simply download +an appropriate image from any number of places. + +That said, here are the commands: + +------------------------------------------------------------------------ +dd if=/dev/zero of=rcu-test-image bs=400M count=1 +mkfs.ext3 ./rcu-test-image +sudo mount -o loop ./rcu-test-image /mnt + +# Replace "precise" below with your favorite Ubuntu release. +# Empirical evidence says this image will work for 64-bit, but... +# Note that debootstrap does take a few minutes to run. Or longer. +sudo debootstrap --verbose --arch i386 precise /mnt http://archive.ubuntu.com/ubuntu +cat << '___EOF___' | sudo dd of=/mnt/etc/fstab +# UNCONFIGURED FSTAB FOR BASE SYSTEM +# +/dev/vda / ext3 defaults 1 1 +dev /dev tmpfs rw 0 0 +tmpfs /dev/shm tmpfs defaults 0 0 +devpts /dev/pts devpts gid=5,mode=620 0 0 +sysfs /sys sysfs defaults 0 0 +proc /proc proc defaults 0 0 +___EOF___ +sudo umount /mnt +------------------------------------------------------------------------ + + +References: + + http://sripathikodi.blogspot.com/2010/02/creating-kvm-bootable-fedora-system.html + https://help.ubuntu.com/community/KVM/CreateGuests + https://help.ubuntu.com/community/JeOSVMBuilder + http://wiki.libvirt.org/page/UbuntuKVMWalkthrough + http://www.moe.co.uk/2011/01/07/pci_add_option_rom-failed-to-find-romfile-pxe-rtl8139-bin/ -- "apt-get install kvm-pxe" + http://www.landley.net/writing/rootfs-howto.html + http://en.wikipedia.org/wiki/Initrd + http://en.wikipedia.org/wiki/Cpio + http://wiki.libvirt.org/page/UbuntuKVMWalkthrough diff --git a/tools/testing/selftests/sysctl/Makefile b/tools/testing/selftests/sysctl/Makefile new file mode 100644 index 00000000000..0a92adaf086 --- /dev/null +++ b/tools/testing/selftests/sysctl/Makefile @@ -0,0 +1,19 @@ +# Makefile for sysctl selftests. +# Expects kernel.sysctl_writes_strict=1. + +# No binaries, but make sure arg-less "make" doesn't trigger "run_tests". +all: + +# Allow specific tests to be selected. +test_num: + @/bin/sh ./run_numerictests + +test_string: + @/bin/sh ./run_stringtests + +run_tests: all test_num test_string + +# Nothing to clean up. +clean: + +.PHONY: all run_tests clean test_num test_string diff --git a/tools/testing/selftests/sysctl/common_tests b/tools/testing/selftests/sysctl/common_tests new file mode 100644 index 00000000000..17d534b1b7b --- /dev/null +++ b/tools/testing/selftests/sysctl/common_tests @@ -0,0 +1,109 @@ +#!/bin/sh + +TEST_FILE=$(mktemp) + +echo "== Testing sysctl behavior against ${TARGET} ==" + +set_orig() +{ + echo "${ORIG}" > "${TARGET}" +} + +set_test() +{ + echo "${TEST_STR}" > "${TARGET}" +} + +verify() +{ + local seen + seen=$(cat "$1") + if [ "${seen}" != "${TEST_STR}" ]; then + return 1 + fi + return 0 +} + +trap 'set_orig; rm -f "${TEST_FILE}"' EXIT + +rc=0 + +echo -n "Writing test file ... " +echo "${TEST_STR}" > "${TEST_FILE}" +if ! verify "${TEST_FILE}"; then + echo "FAIL" >&2 + exit 1 +else + echo "ok" +fi + +echo -n "Checking sysctl is not set to test value ... " +if verify "${TARGET}"; then + echo "FAIL" >&2 + exit 1 +else + echo "ok" +fi + +echo -n "Writing sysctl from shell ... " +set_test +if ! verify "${TARGET}"; then + echo "FAIL" >&2 + exit 1 +else + echo "ok" +fi + +echo -n "Resetting sysctl to original value ... " +set_orig +if verify "${TARGET}"; then + echo "FAIL" >&2 + exit 1 +else + echo "ok" +fi + +# Now that we've validated the sanity of "set_test" and "set_orig", +# we can use those functions to set starting states before running +# specific behavioral tests. + +echo -n "Writing entire sysctl in single write ... " +set_orig +dd if="${TEST_FILE}" of="${TARGET}" bs=4096 2>/dev/null +if ! verify "${TARGET}"; then + echo "FAIL" >&2 + rc=1 +else + echo "ok" +fi + +echo -n "Writing middle of sysctl after synchronized seek ... " +set_test +dd if="${TEST_FILE}" of="${TARGET}" bs=1 seek=1 skip=1 2>/dev/null +if ! verify "${TARGET}"; then + echo "FAIL" >&2 + rc=1 +else + echo "ok" +fi + +echo -n "Writing beyond end of sysctl ... " +set_orig +dd if="${TEST_FILE}" of="${TARGET}" bs=20 seek=2 2>/dev/null +if verify "${TARGET}"; then + echo "FAIL" >&2 + rc=1 +else + echo "ok" +fi + +echo -n "Writing sysctl with multiple long writes ... " +set_orig +(perl -e 'print "A" x 50;'; echo "${TEST_STR}") | \ + dd of="${TARGET}" bs=50 2>/dev/null +if verify "${TARGET}"; then + echo "FAIL" >&2 + rc=1 +else + echo "ok" +fi diff --git a/tools/testing/selftests/sysctl/run_numerictests b/tools/testing/selftests/sysctl/run_numerictests new file mode 100644 index 00000000000..8510f93f2d1 --- /dev/null +++ b/tools/testing/selftests/sysctl/run_numerictests @@ -0,0 +1,10 @@ +#!/bin/sh + +SYSCTL="/proc/sys" +TARGET="${SYSCTL}/vm/swappiness" +ORIG=$(cat "${TARGET}") +TEST_STR=$(( $ORIG + 1 )) + +. ./common_tests + +exit $rc diff --git a/tools/testing/selftests/sysctl/run_stringtests b/tools/testing/selftests/sysctl/run_stringtests new file mode 100644 index 00000000000..90a9293d520 --- /dev/null +++ b/tools/testing/selftests/sysctl/run_stringtests @@ -0,0 +1,77 @@ +#!/bin/sh + +SYSCTL="/proc/sys" +TARGET="${SYSCTL}/kernel/domainname" +ORIG=$(cat "${TARGET}") +TEST_STR="Testing sysctl" + +. ./common_tests + +# Only string sysctls support seeking/appending. +MAXLEN=65 + +echo -n "Writing entire sysctl in short writes ... " +set_orig +dd if="${TEST_FILE}" of="${TARGET}" bs=1 2>/dev/null +if ! verify "${TARGET}"; then + echo "FAIL" >&2 + rc=1 +else + echo "ok" +fi + +echo -n "Writing middle of sysctl after unsynchronized seek ... " +set_test +dd if="${TEST_FILE}" of="${TARGET}" bs=1 seek=1 2>/dev/null +if verify "${TARGET}"; then + echo "FAIL" >&2 + rc=1 +else + echo "ok" +fi + +echo -n "Checking sysctl maxlen is at least $MAXLEN ... " +set_orig +perl -e 'print "A" x ('"${MAXLEN}"'-2), "B";' | \ + dd of="${TARGET}" bs="${MAXLEN}" 2>/dev/null +if ! grep -q B "${TARGET}"; then + echo "FAIL" >&2 + rc=1 +else + echo "ok" +fi + +echo -n "Checking sysctl keeps original string on overflow append ... " +set_orig +perl -e 'print "A" x ('"${MAXLEN}"'-1), "B";' | \ + dd of="${TARGET}" bs=$(( MAXLEN - 1 )) 2>/dev/null +if grep -q B "${TARGET}"; then + echo "FAIL" >&2 + rc=1 +else + echo "ok" +fi + +echo -n "Checking sysctl stays NULL terminated on write ... " +set_orig +perl -e 'print "A" x ('"${MAXLEN}"'-1), "B";' | \ + dd of="${TARGET}" bs="${MAXLEN}" 2>/dev/null +if grep -q B "${TARGET}"; then + echo "FAIL" >&2 + rc=1 +else + echo "ok" +fi + +echo -n "Checking sysctl stays NULL terminated on overwrite ... " +set_orig +perl -e 'print "A" x ('"${MAXLEN}"'-1), "BB";' | \ + dd of="${TARGET}" bs=$(( $MAXLEN + 1 )) 2>/dev/null +if grep -q B "${TARGET}"; then + echo "FAIL" >&2 + rc=1 +else + echo "ok" +fi + +exit $rc diff --git a/tools/testing/selftests/timers/Makefile b/tools/testing/selftests/timers/Makefile new file mode 100644 index 00000000000..eb2859f4ad2 --- /dev/null +++ b/tools/testing/selftests/timers/Makefile @@ -0,0 +1,8 @@ +all: + gcc posix_timers.c -o posix_timers -lrt + +run_tests: all + ./posix_timers + +clean: + rm -f ./posix_timers diff --git a/tools/testing/selftests/timers/posix_timers.c b/tools/testing/selftests/timers/posix_timers.c new file mode 100644 index 00000000000..41bd85559d4 --- /dev/null +++ b/tools/testing/selftests/timers/posix_timers.c @@ -0,0 +1,221 @@ +/* + * Copyright (C) 2013 Red Hat, Inc., Frederic Weisbecker <fweisbec@redhat.com> + * + * Licensed under the terms of the GNU GPL License version 2 + * + * Selftests for a few posix timers interface. + * + * Kernel loop code stolen from Steven Rostedt <srostedt@redhat.com> + */ + +#include <sys/time.h> +#include <stdio.h> +#include <signal.h> +#include <unistd.h> +#include <time.h> +#include <pthread.h> + +#define DELAY 2 +#define USECS_PER_SEC 1000000 + +static volatile int done; + +/* Busy loop in userspace to elapse ITIMER_VIRTUAL */ +static void user_loop(void) +{ + while (!done); +} + +/* + * Try to spend as much time as possible in kernelspace + * to elapse ITIMER_PROF. + */ +static void kernel_loop(void) +{ + void *addr = sbrk(0); + + while (!done) { + brk(addr + 4096); + brk(addr); + } +} + +/* + * Sleep until ITIMER_REAL expiration. + */ +static void idle_loop(void) +{ + pause(); +} + +static void sig_handler(int nr) +{ + done = 1; +} + +/* + * Check the expected timer expiration matches the GTOD elapsed delta since + * we armed the timer. Keep a 0.5 sec error margin due to various jitter. + */ +static int check_diff(struct timeval start, struct timeval end) +{ + long long diff; + + diff = end.tv_usec - start.tv_usec; + diff += (end.tv_sec - start.tv_sec) * USECS_PER_SEC; + + if (abs(diff - DELAY * USECS_PER_SEC) > USECS_PER_SEC / 2) { + printf("Diff too high: %lld..", diff); + return -1; + } + + return 0; +} + +static int check_itimer(int which) +{ + int err; + struct timeval start, end; + struct itimerval val = { + .it_value.tv_sec = DELAY, + }; + + printf("Check itimer "); + + if (which == ITIMER_VIRTUAL) + printf("virtual... "); + else if (which == ITIMER_PROF) + printf("prof... "); + else if (which == ITIMER_REAL) + printf("real... "); + + fflush(stdout); + + done = 0; + + if (which == ITIMER_VIRTUAL) + signal(SIGVTALRM, sig_handler); + else if (which == ITIMER_PROF) + signal(SIGPROF, sig_handler); + else if (which == ITIMER_REAL) + signal(SIGALRM, sig_handler); + + err = gettimeofday(&start, NULL); + if (err < 0) { + perror("Can't call gettimeofday()\n"); + return -1; + } + + err = setitimer(which, &val, NULL); + if (err < 0) { + perror("Can't set timer\n"); + return -1; + } + + if (which == ITIMER_VIRTUAL) + user_loop(); + else if (which == ITIMER_PROF) + kernel_loop(); + else if (which == ITIMER_REAL) + idle_loop(); + + gettimeofday(&end, NULL); + if (err < 0) { + perror("Can't call gettimeofday()\n"); + return -1; + } + + if (!check_diff(start, end)) + printf("[OK]\n"); + else + printf("[FAIL]\n"); + + return 0; +} + +static int check_timer_create(int which) +{ + int err; + timer_t id; + struct timeval start, end; + struct itimerspec val = { + .it_value.tv_sec = DELAY, + }; + + printf("Check timer_create() "); + if (which == CLOCK_THREAD_CPUTIME_ID) { + printf("per thread... "); + } else if (which == CLOCK_PROCESS_CPUTIME_ID) { + printf("per process... "); + } + fflush(stdout); + + done = 0; + err = timer_create(which, NULL, &id); + if (err < 0) { + perror("Can't create timer\n"); + return -1; + } + signal(SIGALRM, sig_handler); + + err = gettimeofday(&start, NULL); + if (err < 0) { + perror("Can't call gettimeofday()\n"); + return -1; + } + + err = timer_settime(id, 0, &val, NULL); + if (err < 0) { + perror("Can't set timer\n"); + return -1; + } + + user_loop(); + + gettimeofday(&end, NULL); + if (err < 0) { + perror("Can't call gettimeofday()\n"); + return -1; + } + + if (!check_diff(start, end)) + printf("[OK]\n"); + else + printf("[FAIL]\n"); + + return 0; +} + +int main(int argc, char **argv) +{ + int err; + + printf("Testing posix timers. False negative may happen on CPU execution \n"); + printf("based timers if other threads run on the CPU...\n"); + + if (check_itimer(ITIMER_VIRTUAL) < 0) + return -1; + + if (check_itimer(ITIMER_PROF) < 0) + return -1; + + if (check_itimer(ITIMER_REAL) < 0) + return -1; + + if (check_timer_create(CLOCK_THREAD_CPUTIME_ID) < 0) + return -1; + + /* + * It's unfortunately hard to reliably test a timer expiration + * on parallel multithread cputime. We could arm it to expire + * on DELAY * nr_threads, with nr_threads busy looping, then wait + * the normal DELAY since the time is elapsing nr_threads faster. + * But for that we need to ensure we have real physical free CPUs + * to ensure true parallelism. So test only one thread until we + * find a better solution. + */ + if (check_timer_create(CLOCK_PROCESS_CPUTIME_ID) < 0) + return -1; + + return 0; +} diff --git a/tools/testing/selftests/user/Makefile b/tools/testing/selftests/user/Makefile new file mode 100644 index 00000000000..396255bd720 --- /dev/null +++ b/tools/testing/selftests/user/Makefile @@ -0,0 +1,13 @@ +# Makefile for user memory selftests + +# No binaries, but make sure arg-less "make" doesn't trigger "run_tests" +all: + +run_tests: all + @if /sbin/modprobe test_user_copy ; then \ + rmmod test_user_copy; \ + echo "user_copy: ok"; \ + else \ + echo "user_copy: [FAIL]"; \ + exit 1; \ + fi diff --git a/tools/testing/selftests/vm/.gitignore b/tools/testing/selftests/vm/.gitignore new file mode 100644 index 00000000000..ff1bb16cec4 --- /dev/null +++ b/tools/testing/selftests/vm/.gitignore @@ -0,0 +1,4 @@ +hugepage-mmap +hugepage-shm +map_hugetlb +thuge-gen diff --git a/tools/testing/selftests/vm/Makefile b/tools/testing/selftests/vm/Makefile index 436d2e81868..3f94e1afd6c 100644 --- a/tools/testing/selftests/vm/Makefile +++ b/tools/testing/selftests/vm/Makefile @@ -2,13 +2,14 @@ CC = $(CROSS_COMPILE)gcc CFLAGS = -Wall +BINARIES = hugepage-mmap hugepage-shm map_hugetlb thuge-gen hugetlbfstest -all: hugepage-mmap hugepage-shm map_hugetlb thuge-gen +all: $(BINARIES) %: %.c $(CC) $(CFLAGS) -o $@ $^ run_tests: all - @/bin/sh ./run_vmtests || echo "vmtests: [FAIL]" + @/bin/sh ./run_vmtests || (echo "vmtests: [FAIL]"; exit 1) clean: - $(RM) hugepage-mmap hugepage-shm map_hugetlb + $(RM) $(BINARIES) diff --git a/tools/testing/selftests/vm/hugetlbfstest.c b/tools/testing/selftests/vm/hugetlbfstest.c new file mode 100644 index 00000000000..ea40ff8c239 --- /dev/null +++ b/tools/testing/selftests/vm/hugetlbfstest.c @@ -0,0 +1,84 @@ +#define _GNU_SOURCE +#include <assert.h> +#include <fcntl.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <sys/mman.h> +#include <sys/stat.h> +#include <sys/types.h> +#include <unistd.h> + +typedef unsigned long long u64; + +static size_t length = 1 << 24; + +static u64 read_rss(void) +{ + char buf[4096], *s = buf; + int i, fd; + u64 rss; + + fd = open("/proc/self/statm", O_RDONLY); + assert(fd > 2); + memset(buf, 0, sizeof(buf)); + read(fd, buf, sizeof(buf) - 1); + for (i = 0; i < 1; i++) + s = strchr(s, ' ') + 1; + rss = strtoull(s, NULL, 10); + return rss << 12; /* assumes 4k pagesize */ +} + +static void do_mmap(int fd, int extra_flags, int unmap) +{ + int *p; + int flags = MAP_PRIVATE | MAP_POPULATE | extra_flags; + u64 before, after; + + before = read_rss(); + p = mmap(NULL, length, PROT_READ | PROT_WRITE, flags, fd, 0); + assert(p != MAP_FAILED || + !"mmap returned an unexpected error"); + after = read_rss(); + assert(llabs(after - before - length) < 0x40000 || + !"rss didn't grow as expected"); + if (!unmap) + return; + munmap(p, length); + after = read_rss(); + assert(llabs(after - before) < 0x40000 || + !"rss didn't shrink as expected"); +} + +static int open_file(const char *path) +{ + int fd, err; + + unlink(path); + fd = open(path, O_CREAT | O_RDWR | O_TRUNC | O_EXCL + | O_LARGEFILE | O_CLOEXEC, 0600); + assert(fd > 2); + unlink(path); + err = ftruncate(fd, length); + assert(!err); + return fd; +} + +int main(void) +{ + int hugefd, fd; + + fd = open_file("/dev/shm/hugetlbhog"); + hugefd = open_file("/hugepages/hugetlbhog"); + + system("echo 100 > /proc/sys/vm/nr_hugepages"); + do_mmap(-1, MAP_ANONYMOUS, 1); + do_mmap(fd, 0, 1); + do_mmap(-1, MAP_ANONYMOUS | MAP_HUGETLB, 1); + do_mmap(hugefd, 0, 1); + do_mmap(hugefd, MAP_HUGETLB, 1); + /* Leak the last one to test do_exit() */ + do_mmap(-1, MAP_ANONYMOUS | MAP_HUGETLB, 0); + printf("oll korrekt.\n"); + return 0; +} diff --git a/tools/testing/selftests/vm/run_vmtests b/tools/testing/selftests/vm/run_vmtests index 4c53cae6c27..c87b6812300 100644 --- a/tools/testing/selftests/vm/run_vmtests +++ b/tools/testing/selftests/vm/run_vmtests @@ -4,6 +4,7 @@ #we need 256M, below is the size in kB needmem=262144 mnt=./huge +exitcode=0 #get pagesize and freepages from /proc/meminfo while read name size unit; do @@ -41,6 +42,7 @@ echo "--------------------" ./hugepage-mmap if [ $? -ne 0 ]; then echo "[FAIL]" + exitcode=1 else echo "[PASS]" fi @@ -55,6 +57,7 @@ echo "--------------------" ./hugepage-shm if [ $? -ne 0 ]; then echo "[FAIL]" + exitcode=1 else echo "[PASS]" fi @@ -67,6 +70,18 @@ echo "--------------------" ./map_hugetlb if [ $? -ne 0 ]; then echo "[FAIL]" + exitcode=1 +else + echo "[PASS]" +fi + +echo "--------------------" +echo "running hugetlbfstest" +echo "--------------------" +./hugetlbfstest +if [ $? -ne 0 ]; then + echo "[FAIL]" + exitcode=1 else echo "[PASS]" fi @@ -75,3 +90,4 @@ fi umount $mnt rm -rf $mnt echo $nr_hugepgs > /proc/sys/vm/nr_hugepages +exit $exitcode |