4 files changed, 56 insertions, 22 deletions
diff --git a/tools/power/cpupower/debug/i386/Makefile b/tools/power/cpupower/debug/i386/Makefile
index d08cc1ead9b..c05cc0ac80c 100644
--- a/tools/power/cpupower/debug/i386/Makefile
+++ b/tools/power/cpupower/debug/i386/Makefile
@@ -1,20 +1,41 @@
+OUTPUT=./
+ifeq ("$(origin O)", "command line")
+	OUTPUT := $(O)/
+endif
+
+DESTDIR =
+bindir  = /usr/bin
+
+INSTALL = /usr/bin/install
+
+
 default: all
 
-centrino-decode: centrino-decode.c
-	$(CC) $(CFLAGS) -o centrino-decode centrino-decode.c
+$(OUTPUT)centrino-decode: centrino-decode.c
+	$(CC) $(CFLAGS) -o $@ centrino-decode.c
 
-dump_psb: dump_psb.c
-	$(CC) $(CFLAGS) -o dump_psb dump_psb.c
+$(OUTPUT)dump_psb: dump_psb.c
+	$(CC) $(CFLAGS) -o $@ dump_psb.c
 
-intel_gsic: intel_gsic.c
-	$(CC) $(CFLAGS) -o intel_gsic -llrmi intel_gsic.c
+$(OUTPUT)intel_gsic: intel_gsic.c
+	$(CC) $(CFLAGS) -o $@ -llrmi intel_gsic.c
 
-powernow-k8-decode: powernow-k8-decode.c
-	$(CC) $(CFLAGS) -o powernow-k8-decode powernow-k8-decode.c
+$(OUTPUT)powernow-k8-decode: powernow-k8-decode.c
+	$(CC) $(CFLAGS) -o $@ powernow-k8-decode.c
 
-all: centrino-decode dump_psb intel_gsic powernow-k8-decode
+all: $(OUTPUT)centrino-decode $(OUTPUT)dump_psb $(OUTPUT)intel_gsic $(OUTPUT)powernow-k8-decode
 
 clean:
-	rm -rf centrino-decode dump_psb intel_gsic powernow-k8-decode
+	rm -rf $(OUTPUT)centrino-decode
+	rm -rf $(OUTPUT)dump_psb
+	rm -rf $(OUTPUT)intel_gsic
+	rm -rf $(OUTPUT)powernow-k8-decode
+
+install:
+	$(INSTALL) -d $(DESTDIR)${bindir}
+	$(INSTALL) $(OUTPUT)centrino-decode $(DESTDIR)${bindir}
+	$(INSTALL) $(OUTPUT)powernow-k8-decode $(DESTDIR)${bindir}
+	$(INSTALL) $(OUTPUT)dump_psb $(DESTDIR)${bindir}
+	$(INSTALL) $(OUTPUT)intel_gsic $(DESTDIR)${bindir}
 
-.PHONY: all default clean
+.PHONY: all default clean install
diff --git a/tools/power/cpupower/debug/i386/intel_gsic.c b/tools/power/cpupower/debug/i386/intel_gsic.c
index 53f5293c9c9..d032c826d42 100644
--- a/tools/power/cpupower/debug/i386/intel_gsic.c
+++ b/tools/power/cpupower/debug/i386/intel_gsic.c
@@ -66,7 +66,7 @@ int main (void)
 		printf("ecx = 0x%.8x\n", r.ecx);
 		printf("edx = 0x%.8x\n", r.edx);
 		printf("Note also that some BIOS do not support the initial "
-		       "GSIC call, but the newer\nspeeedstep-smi driver may "
+		       "GSIC call, but the newer\nspeedstep-smi driver may "
 		       "work.\nFor this, you need to pass some arguments to "
 		       "the speedstep-smi driver:\n");
 		printf("\tsmi_cmd=0x?? smi_port=0x?? smi_sig=1\n");
diff --git a/tools/power/cpupower/debug/kernel/cpufreq-test_tsc.c b/tools/power/cpupower/debug/kernel/cpufreq-test_tsc.c
index 66cace601e5..5224ee5b392 100644
--- a/tools/power/cpupower/debug/kernel/cpufreq-test_tsc.c
+++ b/tools/power/cpupower/debug/kernel/cpufreq-test_tsc.c
@@ -18,19 +18,16 @@
  * 5.) if the third value, "diff_pmtmr", changes between 2. and 4., the
  *     TSC-based delay routine on the Linux kernel does not correctly
  *     handle the cpufreq transition. Please report this to
- *     cpufreq@vger.kernel.org
+ *     linux-pm@vger.kernel.org
  */
 
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-
+#include <linux/acpi.h>
 #include <asm/io.h>
 
-#include <acpi/acpi_bus.h>
-#include <acpi/acpi_drivers.h>
-
 static int pm_tmr_ioport = 0;
 
 /*helper function to safely read acpi pm timesource*/
diff --git a/tools/power/cpupower/debug/x86_64/Makefile b/tools/power/cpupower/debug/x86_64/Makefile
index 3326217dd31..1c521452671 100644
--- a/tools/power/cpupower/debug/x86_64/Makefile
+++ b/tools/power/cpupower/debug/x86_64/Makefile
@@ -1,14 +1,30 @@
+OUTPUT=./
+ifeq ("$(origin O)", "command line")
+	OUTPUT := $(O)/
+endif
+
+DESTDIR =
+bindir  = /usr/bin
+
+INSTALL = /usr/bin/install
+
+
 default: all
 
-centrino-decode: ../i386/centrino-decode.c
+$(OUTPUT)centrino-decode: ../i386/centrino-decode.c
 	$(CC) $(CFLAGS) -o $@ $<
 
-powernow-k8-decode: ../i386/powernow-k8-decode.c
+$(OUTPUT)powernow-k8-decode: ../i386/powernow-k8-decode.c
 	$(CC) $(CFLAGS) -o $@ $<
 
-all: centrino-decode powernow-k8-decode
+all: $(OUTPUT)centrino-decode $(OUTPUT)powernow-k8-decode
 
 clean:
-	rm -rf centrino-decode powernow-k8-decode
+	rm -rf $(OUTPUT)centrino-decode $(OUTPUT)powernow-k8-decode
+
+install:
+	$(INSTALL) -d $(DESTDIR)${bindir}
+	$(INSTALL) $(OUTPUT)centrino-decode $(DESTDIR)${bindir}
+	$(INSTALL) $(OUTPUT)powernow-k8-decode $(DESTDIR)${bindir}
 
-.PHONY: all default clean
+.PHONY: all default clean install