diff options
Diffstat (limited to 'tools/perf/config/Makefile')
| -rw-r--r-- | tools/perf/config/Makefile | 615 |
1 files changed, 438 insertions, 177 deletions
diff --git a/tools/perf/config/Makefile b/tools/perf/config/Makefile index b5d9238cb18..f30ac5e5d27 100644 --- a/tools/perf/config/Makefile +++ b/tools/perf/config/Makefile @@ -1,55 +1,92 @@ -uname_M := $(shell uname -m 2>/dev/null || echo not) -ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \ - -e s/arm.*/arm/ -e s/sa110/arm/ \ - -e s/s390x/s390/ -e s/parisc64/parisc/ \ - -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \ - -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ ) -NO_PERF_REGS := 1 -CFLAGS := $(EXTRA_CFLAGS) $(EXTRA_WARNINGS) +ifeq ($(src-perf),) +src-perf := $(srctree)/tools/perf +endif -# Additional ARCH settings for x86 -ifeq ($(ARCH),i386) - override ARCH := x86 - NO_PERF_REGS := 0 - LIBUNWIND_LIBS = -lunwind -lunwind-x86 +ifeq ($(obj-perf),) +obj-perf := $(OUTPUT) endif -ifeq ($(ARCH),x86_64) - override ARCH := x86 - IS_X86_64 := 0 - ifeq (, $(findstring m32,$(CFLAGS))) - IS_X86_64 := $(shell echo __x86_64__ | ${CC} -E -x c - | tail -n 1) - endif +ifneq ($(obj-perf),) +obj-perf := $(abspath $(obj-perf))/ +endif + +LIB_INCLUDE := $(srctree)/tools/lib/ +CFLAGS := $(EXTRA_CFLAGS) $(EXTRA_WARNINGS) + +include $(src-perf)/config/Makefile.arch + +NO_PERF_REGS := 1 + +# Additional ARCH settings for x86 +ifeq ($(ARCH),x86) ifeq (${IS_X86_64}, 1) - RAW_ARCH := x86_64 - CFLAGS += -DARCH_X86_64 + CFLAGS += -DHAVE_ARCH_X86_64_SUPPORT ARCH_INCLUDE = ../../arch/x86/lib/memcpy_64.S ../../arch/x86/lib/memset_64.S + LIBUNWIND_LIBS = -lunwind -lunwind-x86_64 + else + LIBUNWIND_LIBS = -lunwind -lunwind-x86 endif NO_PERF_REGS := 0 - LIBUNWIND_LIBS = -lunwind -lunwind-x86_64 endif -ifeq ($(NO_PERF_REGS),0) - CFLAGS += -DHAVE_PERF_REGS +ifeq ($(ARCH),arm) + NO_PERF_REGS := 0 + LIBUNWIND_LIBS = -lunwind -lunwind-arm endif -ifeq ($(src-perf),) -src-perf := $(srctree)/tools/perf +ifeq ($(ARCH),arm64) + NO_PERF_REGS := 0 + LIBUNWIND_LIBS = -lunwind -lunwind-aarch64 endif -ifeq ($(obj-perf),) -obj-perf := $(OUTPUT) +# So far there's only x86 and arm libdw unwind support merged in perf. +# Disable it on all other architectures in case libdw unwind +# support is detected in system. Add supported architectures +# to the check. +ifneq ($(ARCH),$(filter $(ARCH),x86 arm)) + NO_LIBDW_DWARF_UNWIND := 1 endif -ifneq ($(obj-perf),) -obj-perf := $(abspath $(obj-perf))/ +ifeq ($(LIBUNWIND_LIBS),) + NO_LIBUNWIND := 1 +else + # + # For linking with debug library, run like: + # + # make DEBUG=1 LIBUNWIND_DIR=/opt/libunwind/ + # + ifdef LIBUNWIND_DIR + LIBUNWIND_CFLAGS = -I$(LIBUNWIND_DIR)/include + LIBUNWIND_LDFLAGS = -L$(LIBUNWIND_DIR)/lib + endif + LIBUNWIND_LDFLAGS += $(LIBUNWIND_LIBS) + + # Set per-feature check compilation flags + FEATURE_CHECK_CFLAGS-libunwind = $(LIBUNWIND_CFLAGS) + FEATURE_CHECK_LDFLAGS-libunwind = $(LIBUNWIND_LDFLAGS) + FEATURE_CHECK_CFLAGS-libunwind-debug-frame = $(LIBUNWIND_CFLAGS) + FEATURE_CHECK_LDFLAGS-libunwind-debug-frame = $(LIBUNWIND_LDFLAGS) +endif + +ifeq ($(NO_PERF_REGS),0) + CFLAGS += -DHAVE_PERF_REGS_SUPPORT +endif + +ifndef NO_LIBELF + # for linking with debug library, run like: + # make DEBUG=1 LIBDW_DIR=/opt/libdw/ + ifdef LIBDW_DIR + LIBDW_CFLAGS := -I$(LIBDW_DIR)/include + LIBDW_LDFLAGS := -L$(LIBDW_DIR)/lib + endif + FEATURE_CHECK_CFLAGS-libdw-dwarf-unwind := $(LIBDW_CFLAGS) + FEATURE_CHECK_LDFLAGS-libdw-dwarf-unwind := $(LIBDW_LDFLAGS) -ldw endif # include ARCH specific config -include $(src-perf)/arch/$(ARCH)/Makefile -include $(src-perf)/config/feature-tests.mak include $(src-perf)/config/utilities.mak ifeq ($(call get-executable,$(FLEX)),) @@ -65,10 +102,11 @@ ifneq ($(WERROR),0) CFLAGS += -Werror endif -ifeq ("$(origin DEBUG)", "command line") - PERF_DEBUG = $(DEBUG) +ifndef DEBUG + DEBUG := 0 endif -ifndef PERF_DEBUG + +ifeq ($(DEBUG),0) CFLAGS += -O6 endif @@ -85,28 +123,133 @@ CFLAGS += -Wall CFLAGS += -Wextra CFLAGS += -std=gnu99 -EXTLIBS = -lelf -lpthread -lrt -lm +# Enforce a non-executable stack, as we may regress (again) in the future by +# adding assembler files missing the .GNU-stack linker note. +LDFLAGS += -Wl,-z,noexecstack -ifeq ($(call try-cc,$(SOURCE_HELLO),$(CFLAGS) -Werror -fstack-protector-all,-fstack-protector-all),y) - CFLAGS += -fstack-protector-all +EXTLIBS = -lelf -lpthread -lrt -lm -ldl + +ifneq ($(OUTPUT),) + OUTPUT_FEATURES = $(OUTPUT)config/feature-checks/ + $(shell mkdir -p $(OUTPUT_FEATURES)) endif -ifeq ($(call try-cc,$(SOURCE_HELLO),$(CFLAGS) -Werror -Wstack-protector,-Wstack-protector),y) - CFLAGS += -Wstack-protector +feature_check = $(eval $(feature_check_code)) +define feature_check_code + feature-$(1) := $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS) $(FEATURE_CHECK_CFLAGS-$(1))" LDFLAGS="$(LDFLAGS) $(FEATURE_CHECK_LDFLAGS-$(1))" -C config/feature-checks test-$1.bin >/dev/null 2>/dev/null && echo 1 || echo 0) +endef + +feature_set = $(eval $(feature_set_code)) +define feature_set_code + feature-$(1) := 1 +endef + +# +# Build the feature check binaries in parallel, ignore errors, ignore return value and suppress output: +# + +# +# Note that this is not a complete list of all feature tests, just +# those that are typically built on a fully configured system. +# +# [ Feature tests not mentioned here have to be built explicitly in +# the rule that uses them - an example for that is the 'bionic' +# feature check. ] +# +CORE_FEATURE_TESTS = \ + backtrace \ + dwarf \ + fortify-source \ + glibc \ + gtk2 \ + gtk2-infobar \ + libaudit \ + libbfd \ + libelf \ + libelf-getphdrnum \ + libelf-mmap \ + libnuma \ + libperl \ + libpython \ + libpython-version \ + libslang \ + libunwind \ + stackprotector-all \ + timerfd \ + libdw-dwarf-unwind + +LIB_FEATURE_TESTS = \ + dwarf \ + glibc \ + gtk2 \ + libaudit \ + libbfd \ + libelf \ + libnuma \ + libperl \ + libpython \ + libslang \ + libunwind \ + libdw-dwarf-unwind + +VF_FEATURE_TESTS = \ + backtrace \ + fortify-source \ + gtk2-infobar \ + libelf-getphdrnum \ + libelf-mmap \ + libpython-version \ + stackprotector-all \ + timerfd \ + libunwind-debug-frame \ + bionic \ + liberty \ + liberty-z \ + cplus-demangle + +# Set FEATURE_CHECK_(C|LD)FLAGS-all for all CORE_FEATURE_TESTS features. +# If in the future we need per-feature checks/flags for features not +# mentioned in this list we need to refactor this ;-). +set_test_all_flags = $(eval $(set_test_all_flags_code)) +define set_test_all_flags_code + FEATURE_CHECK_CFLAGS-all += $(FEATURE_CHECK_CFLAGS-$(1)) + FEATURE_CHECK_LDFLAGS-all += $(FEATURE_CHECK_LDFLAGS-$(1)) +endef + +$(foreach feat,$(CORE_FEATURE_TESTS),$(call set_test_all_flags,$(feat))) + +# +# Special fast-path for the 'all features are available' case: +# +$(call feature_check,all,$(MSG)) + +# +# Just in case the build freshly failed, make sure we print the +# feature matrix: +# +ifeq ($(feature-all), 1) + # + # test-all.c passed - just set all the core feature flags to 1: + # + $(foreach feat,$(CORE_FEATURE_TESTS),$(call feature_set,$(feat))) +else + $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS)" LDFLAGS=$(LDFLAGS) -i -j -C config/feature-checks $(addsuffix .bin,$(CORE_FEATURE_TESTS)) >/dev/null 2>&1) + $(foreach feat,$(CORE_FEATURE_TESTS),$(call feature_check,$(feat))) endif -ifeq ($(call try-cc,$(SOURCE_HELLO),$(CFLAGS) -Werror -Wvolatile-register-var,-Wvolatile-register-var),y) - CFLAGS += -Wvolatile-register-var +ifeq ($(feature-stackprotector-all), 1) + CFLAGS += -fstack-protector-all endif -ifndef PERF_DEBUG - ifeq ($(call try-cc,$(SOURCE_HELLO),$(CFLAGS) -D_FORTIFY_SOURCE=2,-D_FORTIFY_SOURCE=2),y) +ifeq ($(DEBUG),0) + ifeq ($(feature-fortify-source), 1) CFLAGS += -D_FORTIFY_SOURCE=2 endif endif CFLAGS += -I$(src-perf)/util/include CFLAGS += -I$(src-perf)/arch/$(ARCH)/include +CFLAGS += -I$(srctree)/tools/include/ CFLAGS += -I$(srctree)/arch/$(ARCH)/include/uapi CFLAGS += -I$(srctree)/arch/$(ARCH)/include CFLAGS += -I$(srctree)/include/uapi @@ -121,123 +264,142 @@ endif CFLAGS += -I$(src-perf)/util CFLAGS += -I$(src-perf) -CFLAGS += -I$(TRACE_EVENT_DIR) -CFLAGS += -I$(srctree)/tools/lib/ +CFLAGS += -I$(LIB_INCLUDE) CFLAGS += -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE ifndef NO_BIONIC -ifeq ($(call try-cc,$(SOURCE_BIONIC),$(CFLAGS),bionic),y) - BIONIC := 1 - EXTLIBS := $(filter-out -lrt,$(EXTLIBS)) - EXTLIBS := $(filter-out -lpthread,$(EXTLIBS)) + $(call feature_check,bionic) + ifeq ($(feature-bionic), 1) + BIONIC := 1 + EXTLIBS := $(filter-out -lrt,$(EXTLIBS)) + EXTLIBS := $(filter-out -lpthread,$(EXTLIBS)) + endif endif -endif # NO_BIONIC ifdef NO_LIBELF NO_DWARF := 1 NO_DEMANGLE := 1 NO_LIBUNWIND := 1 + NO_LIBDW_DWARF_UNWIND := 1 else -FLAGS_LIBELF=$(CFLAGS) $(LDFLAGS) $(EXTLIBS) -ifneq ($(call try-cc,$(SOURCE_LIBELF),$(FLAGS_LIBELF),libelf),y) - FLAGS_GLIBC=$(CFLAGS) $(LDFLAGS) - ifeq ($(call try-cc,$(SOURCE_GLIBC),$(FLAGS_GLIBC),glibc),y) - LIBC_SUPPORT := 1 - endif - ifeq ($(BIONIC),1) - LIBC_SUPPORT := 1 - endif - ifeq ($(LIBC_SUPPORT),1) - msg := $(warning No libelf found, disables 'probe' tool, please install elfutils-libelf-devel/libelf-dev); - - NO_LIBELF := 1 - NO_DWARF := 1 - NO_DEMANGLE := 1 + ifeq ($(feature-libelf), 0) + ifeq ($(feature-glibc), 1) + LIBC_SUPPORT := 1 + endif + ifeq ($(BIONIC),1) + LIBC_SUPPORT := 1 + endif + ifeq ($(LIBC_SUPPORT),1) + msg := $(warning No libelf found, disables 'probe' tool, please install elfutils-libelf-devel/libelf-dev); + + NO_LIBELF := 1 + NO_DWARF := 1 + NO_DEMANGLE := 1 + NO_LIBUNWIND := 1 + NO_LIBDW_DWARF_UNWIND := 1 + else + ifneq ($(filter s% -static%,$(LDFLAGS),),) + msg := $(error No static glibc found, please install glibc-static); + else + msg := $(error No gnu/libc-version.h found, please install glibc-dev[el]); + endif + endif else - msg := $(error No gnu/libc-version.h found, please install glibc-dev[el]/glibc-static); - endif -else - # for linking with debug library, run like: - # make DEBUG=1 LIBDW_DIR=/opt/libdw/ - ifdef LIBDW_DIR - LIBDW_CFLAGS := -I$(LIBDW_DIR)/include - LIBDW_LDFLAGS := -L$(LIBDW_DIR)/lib - endif - - FLAGS_DWARF=$(CFLAGS) $(LIBDW_CFLAGS) -ldw -lz -lelf $(LIBDW_LDFLAGS) $(LDFLAGS) $(EXTLIBS) - ifneq ($(call try-cc,$(SOURCE_DWARF),$(FLAGS_DWARF),libdw),y) - msg := $(warning No libdw.h found or old libdw.h found or elfutils is older than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev); - NO_DWARF := 1 - endif # Dwarf support -endif # SOURCE_LIBELF + ifndef NO_LIBDW_DWARF_UNWIND + ifneq ($(feature-libdw-dwarf-unwind),1) + NO_LIBDW_DWARF_UNWIND := 1 + msg := $(warning No libdw DWARF unwind found, Please install elfutils-devel/libdw-dev >= 0.158 and/or set LIBDW_DIR); + endif + endif + ifneq ($(feature-dwarf), 1) + msg := $(warning No libdw.h found or old libdw.h found or elfutils is older than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev); + NO_DWARF := 1 + endif # Dwarf support + endif # libelf support endif # NO_LIBELF ifndef NO_LIBELF -CFLAGS += -DLIBELF_SUPPORT -FLAGS_LIBELF=$(CFLAGS) $(LDFLAGS) $(EXTLIBS) -ifeq ($(call try-cc,$(SOURCE_ELF_MMAP),$(FLAGS_LIBELF),-DLIBELF_MMAP),y) - CFLAGS += -DLIBELF_MMAP -endif + CFLAGS += -DHAVE_LIBELF_SUPPORT -# include ARCH specific config --include $(src-perf)/arch/$(ARCH)/Makefile + ifeq ($(feature-libelf-mmap), 1) + CFLAGS += -DHAVE_LIBELF_MMAP_SUPPORT + endif -ifndef NO_DWARF -ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined) - msg := $(warning DWARF register mappings have not been defined for architecture $(ARCH), DWARF support disabled); - NO_DWARF := 1 -else - CFLAGS += -DDWARF_SUPPORT $(LIBDW_CFLAGS) - LDFLAGS += $(LIBDW_LDFLAGS) - EXTLIBS += -lelf -ldw -endif # PERF_HAVE_DWARF_REGS -endif # NO_DWARF + ifeq ($(feature-libelf-getphdrnum), 1) + CFLAGS += -DHAVE_ELF_GETPHDRNUM_SUPPORT + endif -endif # NO_LIBELF + # include ARCH specific config + -include $(src-perf)/arch/$(ARCH)/Makefile -ifndef NO_LIBELF -CFLAGS += -DLIBELF_SUPPORT -FLAGS_LIBELF=$(CFLAGS) $(LDFLAGS) $(EXTLIBS) -ifeq ($(call try-cc,$(SOURCE_ELF_MMAP),$(FLAGS_LIBELF),-DLIBELF_MMAP),y) - CFLAGS += -DLIBELF_MMAP -endif # try-cc + ifndef NO_DWARF + ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined) + msg := $(warning DWARF register mappings have not been defined for architecture $(ARCH), DWARF support disabled); + NO_DWARF := 1 + else + CFLAGS += -DHAVE_DWARF_SUPPORT $(LIBDW_CFLAGS) + LDFLAGS += $(LIBDW_LDFLAGS) + EXTLIBS += -lelf -ldw + endif # PERF_HAVE_DWARF_REGS + endif # NO_DWARF endif # NO_LIBELF -# There's only x86 (both 32 and 64) support for CFI unwind so far -ifneq ($(ARCH),x86) - NO_LIBUNWIND := 1 +ifndef NO_LIBUNWIND + ifneq ($(feature-libunwind), 1) + msg := $(warning No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR); + NO_LIBUNWIND := 1 + endif endif -ifndef NO_LIBUNWIND -# for linking with debug library, run like: -# make DEBUG=1 LIBUNWIND_DIR=/opt/libunwind/ -ifdef LIBUNWIND_DIR - LIBUNWIND_CFLAGS := -I$(LIBUNWIND_DIR)/include - LIBUNWIND_LDFLAGS := -L$(LIBUNWIND_DIR)/lib +dwarf-post-unwind := 1 +dwarf-post-unwind-text := BUG + +# setup DWARF post unwinder +ifdef NO_LIBUNWIND + ifdef NO_LIBDW_DWARF_UNWIND + msg := $(warning Disabling post unwind, no support found.); + dwarf-post-unwind := 0 + else + dwarf-post-unwind-text := libdw + endif +else + dwarf-post-unwind-text := libunwind + # Enable libunwind support by default. + ifndef NO_LIBDW_DWARF_UNWIND + NO_LIBDW_DWARF_UNWIND := 1 + endif endif -FLAGS_UNWIND=$(LIBUNWIND_CFLAGS) $(CFLAGS) $(LIBUNWIND_LDFLAGS) $(LDFLAGS) $(EXTLIBS) $(LIBUNWIND_LIBS) -ifneq ($(call try-cc,$(SOURCE_LIBUNWIND),$(FLAGS_UNWIND),libunwind),y) - msg := $(warning No libunwind found, disabling post unwind support. Please install libunwind-dev[el] >= 0.99); - NO_LIBUNWIND := 1 -endif # Libunwind support -endif # NO_LIBUNWIND +ifeq ($(dwarf-post-unwind),1) + CFLAGS += -DHAVE_DWARF_UNWIND_SUPPORT +else + NO_DWARF_UNWIND := 1 +endif ifndef NO_LIBUNWIND - CFLAGS += -DLIBUNWIND_SUPPORT + ifeq ($(ARCH),$(filter $(ARCH),arm arm64)) + $(call feature_check,libunwind-debug-frame) + ifneq ($(feature-libunwind-debug-frame), 1) + msg := $(warning No debug_frame support found in libunwind); + CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME + endif + else + # non-ARM has no dwarf_find_debug_frame() function: + CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME + endif + CFLAGS += -DHAVE_LIBUNWIND_SUPPORT EXTLIBS += $(LIBUNWIND_LIBS) - CFLAGS += $(LIBUNWIND_CFLAGS) + CFLAGS += $(LIBUNWIND_CFLAGS) LDFLAGS += $(LIBUNWIND_LDFLAGS) -endif # NO_LIBUNWIND +endif ifndef NO_LIBAUDIT - FLAGS_LIBAUDIT = $(CFLAGS) $(LDFLAGS) -laudit - ifneq ($(call try-cc,$(SOURCE_LIBAUDIT),$(FLAGS_LIBAUDIT),libaudit),y) + ifneq ($(feature-libaudit), 1) msg := $(warning No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev); NO_LIBAUDIT := 1 else - CFLAGS += -DLIBAUDIT_SUPPORT + CFLAGS += -DHAVE_LIBAUDIT_SUPPORT EXTLIBS += -laudit endif endif @@ -247,30 +409,30 @@ ifdef NO_NEWT endif ifndef NO_SLANG - FLAGS_SLANG=$(CFLAGS) $(LDFLAGS) $(EXTLIBS) -I/usr/include/slang -lslang - ifneq ($(call try-cc,$(SOURCE_SLANG),$(FLAGS_SLANG),libslang),y) + ifneq ($(feature-libslang), 1) msg := $(warning slang not found, disables TUI support. Please install slang-devel or libslang-dev); NO_SLANG := 1 else # Fedora has /usr/include/slang/slang.h, but ubuntu /usr/include/slang.h CFLAGS += -I/usr/include/slang - CFLAGS += -DSLANG_SUPPORT + CFLAGS += -DHAVE_SLANG_SUPPORT EXTLIBS += -lslang endif endif ifndef NO_GTK2 - FLAGS_GTK2=$(CFLAGS) $(LDFLAGS) $(EXTLIBS) $(shell pkg-config --libs --cflags gtk+-2.0 2>/dev/null) - ifneq ($(call try-cc,$(SOURCE_GTK2),$(FLAGS_GTK2),gtk2),y) + FLAGS_GTK2=$(CFLAGS) $(LDFLAGS) $(EXTLIBS) $(shell $(PKG_CONFIG) --libs --cflags gtk+-2.0 2>/dev/null) + ifneq ($(feature-gtk2), 1) msg := $(warning GTK2 not found, disables GTK2 support. Please install gtk2-devel or libgtk2.0-dev); NO_GTK2 := 1 else - ifeq ($(call try-cc,$(SOURCE_GTK2_INFOBAR),$(FLAGS_GTK2),-DHAVE_GTK_INFO_BAR),y) - CFLAGS += -DHAVE_GTK_INFO_BAR + ifeq ($(feature-gtk2-infobar), 1) + GTK_CFLAGS := -DHAVE_GTK_INFO_BAR_SUPPORT endif - CFLAGS += -DGTK2_SUPPORT - CFLAGS += $(shell pkg-config --cflags gtk+-2.0 2>/dev/null) - EXTLIBS += $(shell pkg-config --libs gtk+-2.0 2>/dev/null) + CFLAGS += -DHAVE_GTK2_SUPPORT + GTK_CFLAGS += $(shell $(PKG_CONFIG) --cflags gtk+-2.0 2>/dev/null) + GTK_LIBS := $(shell $(PKG_CONFIG) --libs gtk+-2.0 2>/dev/null) + EXTLIBS += -ldl endif endif @@ -286,15 +448,22 @@ else PERL_EMBED_CCOPTS = `perl -MExtUtils::Embed -e ccopts 2>/dev/null` FLAGS_PERL_EMBED=$(PERL_EMBED_CCOPTS) $(PERL_EMBED_LDOPTS) - ifneq ($(call try-cc,$(SOURCE_PERL_EMBED),$(FLAGS_PERL_EMBED),perl),y) + ifneq ($(feature-libperl), 1) CFLAGS += -DNO_LIBPERL NO_LIBPERL := 1 + msg := $(warning Missing perl devel files. Disabling perl scripting support, consider installing perl-ExtUtils-Embed); else LDFLAGS += $(PERL_EMBED_LDFLAGS) EXTLIBS += $(PERL_EMBED_LIBADD) endif endif +ifeq ($(feature-timerfd), 1) + CFLAGS += -DHAVE_TIMERFD_SUPPORT +else + msg := $(warning No timerfd support. Disables 'perf kvm stat live'); +endif + disable-python = $(eval $(disable-python_code)) define disable-python_code CFLAGS += -DNO_LIBPYTHON @@ -331,11 +500,11 @@ else PYTHON_EMBED_CCOPTS := $(shell $(PYTHON_CONFIG_SQ) --cflags 2>/dev/null) FLAGS_PYTHON_EMBED := $(PYTHON_EMBED_CCOPTS) $(PYTHON_EMBED_LDOPTS) - ifneq ($(call try-cc,$(SOURCE_PYTHON_EMBED),$(FLAGS_PYTHON_EMBED),python),y) + ifneq ($(feature-libpython), 1) $(call disable-python,Python.h (for Python 2.x)) else - ifneq ($(call try-cc,$(SOURCE_PYTHON_VERSION),$(FLAGS_PYTHON_EMBED),python version),y) + ifneq ($(feature-libpython-version), 1) $(warning Python 3 is not yet supported; please set) $(warning PYTHON and/or PYTHON_CONFIG appropriately.) $(warning If you also have Python 2 installed, then) @@ -358,33 +527,39 @@ else endif endif +ifeq ($(feature-libbfd), 1) + EXTLIBS += -lbfd + + # call all detections now so we get correct + # status in VF output + $(call feature_check,liberty) + $(call feature_check,liberty-z) + $(call feature_check,cplus-demangle) + + ifeq ($(feature-liberty), 1) + EXTLIBS += -liberty + else + ifeq ($(feature-liberty-z), 1) + EXTLIBS += -liberty -lz + endif + endif +endif + ifdef NO_DEMANGLE CFLAGS += -DNO_DEMANGLE else - ifdef HAVE_CPLUS_DEMANGLE + ifdef HAVE_CPLUS_DEMANGLE_SUPPORT EXTLIBS += -liberty - CFLAGS += -DHAVE_CPLUS_DEMANGLE + CFLAGS += -DHAVE_CPLUS_DEMANGLE_SUPPORT else - FLAGS_BFD=$(CFLAGS) $(LDFLAGS) $(EXTLIBS) -DPACKAGE='perf' -lbfd - has_bfd := $(call try-cc,$(SOURCE_BFD),$(FLAGS_BFD),libbfd) - ifeq ($(has_bfd),y) - EXTLIBS += -lbfd - else - FLAGS_BFD_IBERTY=$(FLAGS_BFD) -liberty - has_bfd_iberty := $(call try-cc,$(SOURCE_BFD),$(FLAGS_BFD_IBERTY),liberty) - ifeq ($(has_bfd_iberty),y) - EXTLIBS += -lbfd -liberty - else - FLAGS_BFD_IBERTY_Z=$(FLAGS_BFD_IBERTY) -lz - has_bfd_iberty_z := $(call try-cc,$(SOURCE_BFD),$(FLAGS_BFD_IBERTY_Z),libz) - ifeq ($(has_bfd_iberty_z),y) - EXTLIBS += -lbfd -liberty -lz - else - FLAGS_CPLUS_DEMANGLE=$(CFLAGS) $(LDFLAGS) $(EXTLIBS) -liberty - has_cplus_demangle := $(call try-cc,$(SOURCE_CPLUS_DEMANGLE),$(FLAGS_CPLUS_DEMANGLE),demangle) - ifeq ($(has_cplus_demangle),y) + ifneq ($(feature-libbfd), 1) + ifneq ($(feature-liberty), 1) + ifneq ($(feature-liberty-z), 1) + # we dont have neither HAVE_CPLUS_DEMANGLE_SUPPORT + # or any of 'bfd iberty z' trinity + ifeq ($(feature-cplus-demangle), 1) EXTLIBS += -liberty - CFLAGS += -DHAVE_CPLUS_DEMANGLE + CFLAGS += -DHAVE_CPLUS_DEMANGLE_SUPPORT else msg := $(warning No bfd.h/libbfd found, install binutils-dev[el]/zlib-static to gain symbol demangling) CFLAGS += -DNO_DEMANGLE @@ -395,31 +570,22 @@ else endif endif -ifndef NO_STRLCPY - ifeq ($(call try-cc,$(SOURCE_STRLCPY),,-DHAVE_STRLCPY),y) - CFLAGS += -DHAVE_STRLCPY - endif -endif - -ifndef NO_ON_EXIT - ifeq ($(call try-cc,$(SOURCE_ON_EXIT),,-DHAVE_ON_EXIT),y) - CFLAGS += -DHAVE_ON_EXIT - endif +ifneq ($(filter -lbfd,$(EXTLIBS)),) + CFLAGS += -DHAVE_LIBBFD_SUPPORT endif ifndef NO_BACKTRACE - ifeq ($(call try-cc,$(SOURCE_BACKTRACE),,-DBACKTRACE_SUPPORT),y) - CFLAGS += -DBACKTRACE_SUPPORT + ifeq ($(feature-backtrace), 1) + CFLAGS += -DHAVE_BACKTRACE_SUPPORT endif endif ifndef NO_LIBNUMA - FLAGS_LIBNUMA = $(CFLAGS) $(LDFLAGS) -lnuma - ifneq ($(call try-cc,$(SOURCE_LIBNUMA),$(FLAGS_LIBNUMA),libnuma),y) - msg := $(warning No numa.h found, disables 'perf bench numa mem' benchmark, please install numa-libs-devel or libnuma-dev); + ifeq ($(feature-libnuma), 0) + msg := $(warning No numa.h found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev); NO_LIBNUMA := 1 else - CFLAGS += -DLIBNUMA_SUPPORT + CFLAGS += -DHAVE_LIBNUMA_SUPPORT EXTLIBS += -lnuma endif endif @@ -438,7 +604,7 @@ endif # Make the path relative to DESTDIR, not to prefix ifndef DESTDIR -prefix = $(HOME) +prefix ?= $(HOME) endif bindir_relative = bin bindir = $(prefix)/$(bindir_relative) @@ -455,7 +621,12 @@ else sysconfdir = $(prefix)/etc ETC_PERFCONFIG = etc/perfconfig endif +ifeq ($(IS_X86_64),1) +lib = lib64 +else lib = lib +endif +libdir = $(prefix)/$(lib) # Shell quote (do not use $(call) to accommodate ancient setups); ETC_PERFCONFIG_SQ = $(subst ','\'',$(ETC_PERFCONFIG)) @@ -468,6 +639,7 @@ template_dir_SQ = $(subst ','\'',$(template_dir)) htmldir_SQ = $(subst ','\'',$(htmldir)) prefix_SQ = $(subst ','\'',$(prefix)) sysconfdir_SQ = $(subst ','\'',$(sysconfdir)) +libdir_SQ = $(subst ','\'',$(libdir)) ifneq ($(filter /%,$(firstword $(perfexecdir))),) perfexec_instdir = $(perfexecdir) @@ -475,3 +647,92 @@ else perfexec_instdir = $(prefix)/$(perfexecdir) endif perfexec_instdir_SQ = $(subst ','\'',$(perfexec_instdir)) + +# If we install to $(HOME) we keep the traceevent default: +# $(HOME)/.traceevent/plugins +# Otherwise we install plugins into the global $(libdir). +ifdef DESTDIR +plugindir=$(libdir)/traceevent/plugins +plugindir_SQ= $(subst ','\'',$(plugindir)) +endif + +# +# Print the result of the feature test: +# +feature_print_status = $(eval $(feature_print_status_code)) $(info $(MSG)) + +define feature_print_status_code + ifeq ($(feature-$(1)), 1) + MSG = $(shell printf '...%30s: [ \033[32mon\033[m ]' $(1)) + else + MSG = $(shell printf '...%30s: [ \033[31mOFF\033[m ]' $(1)) + endif +endef + +feature_print_var = $(eval $(feature_print_var_code)) $(info $(MSG)) +define feature_print_var_code + MSG = $(shell printf '...%30s: %s' $(1) $($(1))) +endef + +feature_print_text = $(eval $(feature_print_text_code)) $(info $(MSG)) +define feature_print_text_code + MSG = $(shell printf '...%30s: %s' $(1) $(2)) +endef + +PERF_FEATURES := $(foreach feat,$(LIB_FEATURE_TESTS),feature-$(feat)($(feature-$(feat)))) +PERF_FEATURES_FILE := $(shell touch $(OUTPUT)PERF-FEATURES; cat $(OUTPUT)PERF-FEATURES) + +ifeq ($(dwarf-post-unwind),1) + PERF_FEATURES += dwarf-post-unwind($(dwarf-post-unwind-text)) +endif + +# The $(display_lib) controls the default detection message +# output. It's set if: +# - detected features differes from stored features from +# last build (in PERF-FEATURES file) +# - one of the $(LIB_FEATURE_TESTS) is not detected +# - VF is enabled + +ifneq ("$(PERF_FEATURES)","$(PERF_FEATURES_FILE)") + $(shell echo "$(PERF_FEATURES)" > $(OUTPUT)PERF-FEATURES) + display_lib := 1 +endif + +feature_check = $(eval $(feature_check_code)) +define feature_check_code + ifneq ($(feature-$(1)), 1) + display_lib := 1 + endif +endef + +$(foreach feat,$(LIB_FEATURE_TESTS),$(call feature_check,$(feat))) + +ifeq ($(VF),1) + display_lib := 1 + display_vf := 1 +endif + +ifeq ($(display_lib),1) + $(info ) + $(info Auto-detecting system features:) + $(foreach feat,$(LIB_FEATURE_TESTS),$(call feature_print_status,$(feat),)) + + ifeq ($(dwarf-post-unwind),1) + $(call feature_print_text,"DWARF post unwind library", $(dwarf-post-unwind-text)) + endif +endif + +ifeq ($(display_vf),1) + $(foreach feat,$(VF_FEATURE_TESTS),$(call feature_print_status,$(feat),)) + $(info ) + $(call feature_print_var,prefix) + $(call feature_print_var,bindir) + $(call feature_print_var,libdir) + $(call feature_print_var,sysconfdir) + $(call feature_print_var,LIBUNWIND_DIR) + $(call feature_print_var,LIBDW_DIR) +endif + +ifeq ($(display_lib),1) + $(info ) +endif |