1 files changed, 133 insertions, 82 deletions

diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index 93e970f2b3c..114e3e7ff51 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -33,7 +33,6 @@
 #include "pcm.h"
 #include "quirks.h"
 
-#define EP_FLAG_ACTIVATED	0
 #define EP_FLAG_RUNNING		1
 #define EP_FLAG_STOPPING	2
 
@@ -334,8 +333,9 @@ static void queue_pending_output_urbs(struct snd_usb_endpoint *ep)
 
 		err = usb_submit_urb(ctx->urb, GFP_ATOMIC);
 		if (err < 0)
-			snd_printk(KERN_ERR "Unable to submit urb #%d: %d (urb %p)\n",
-				   ctx->index, err, ctx->urb);
+			usb_audio_err(ep->chip,
+				"Unable to submit urb #%d: %d (urb %p)\n",
+				ctx->index, err, ctx->urb);
 		else
 			set_bit(ctx->index, &ep->active_mask);
 	}
@@ -388,7 +388,7 @@ static void snd_complete_urb(struct urb *urb)
 	if (err == 0)
 		return;
 
-	snd_printk(KERN_ERR "cannot submit urb (err = %d)\n", err);
+	usb_audio_err(ep->chip, "cannot submit urb (err = %d)\n", err);
 	//snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN);
 
 exit_clear:
@@ -426,14 +426,15 @@ struct snd_usb_endpoint *snd_usb_add_endpoint(struct snd_usb_audio *chip,
 	list_for_each_entry(ep, &chip->ep_list, list) {
 		if (ep->ep_num == ep_num &&
 		    ep->iface == alts->desc.bInterfaceNumber &&
-		    ep->alt_idx == alts->desc.bAlternateSetting) {
-			snd_printdd(KERN_DEBUG "Re-using EP %x in iface %d,%d @%p\n",
-					ep_num, ep->iface, ep->alt_idx, ep);
+		    ep->altsetting == alts->desc.bAlternateSetting) {
+			usb_audio_dbg(ep->chip,
+				      "Re-using EP %x in iface %d,%d @%p\n",
+					ep_num, ep->iface, ep->altsetting, ep);
 			goto __exit_unlock;
 		}
 	}
 
-	snd_printdd(KERN_DEBUG "Creating new %s %s endpoint #%x\n",
+	usb_audio_dbg(chip, "Creating new %s %s endpoint #%x\n",
 		    is_playback ? "playback" : "capture",
 		    type == SND_USB_ENDPOINT_TYPE_DATA ? "data" : "sync",
 		    ep_num);
@@ -447,7 +448,7 @@ struct snd_usb_endpoint *snd_usb_add_endpoint(struct snd_usb_audio *chip,
 	ep->type = type;
 	ep->ep_num = ep_num;
 	ep->iface = alts->desc.bInterfaceNumber;
-	ep->alt_idx = alts->desc.bAlternateSetting;
+	ep->altsetting = alts->desc.bAlternateSetting;
 	INIT_LIST_HEAD(&ep->ready_playback_urbs);
 	ep_num &= USB_ENDPOINT_NUMBER_MASK;
 
@@ -470,6 +471,10 @@ struct snd_usb_endpoint *snd_usb_add_endpoint(struct snd_usb_audio *chip,
 			ep->syncinterval = 3;
 
 		ep->syncmaxsize = le16_to_cpu(get_endpoint(alts, 1)->wMaxPacketSize);
+
+		if (chip->usb_id == USB_ID(0x0644, 0x8038) /* TEAC UD-H01 */ &&
+		    ep->syncmaxsize == 4)
+			ep->udh01_fb_quirk = 1;
 	}
 
 	list_add_tail(&ep->list, &chip->ep_list);
@@ -497,8 +502,9 @@ static int wait_clear_urbs(struct snd_usb_endpoint *ep)
 	} while (time_before(jiffies, end_time));
 
 	if (alive)
-		snd_printk(KERN_ERR "timeout: still %d active urbs on EP #%x\n",
-					alive, ep->ep_num);
+		usb_audio_err(ep->chip,
+			"timeout: still %d active urbs on EP #%x\n",
+			alive, ep->ep_num);
 	clear_bit(EP_FLAG_STOPPING, &ep->flags);
 
 	return 0;
@@ -574,11 +580,14 @@ static int data_ep_set_params(struct snd_usb_endpoint *ep,
 			      snd_pcm_format_t pcm_format,
 			      unsigned int channels,
 			      unsigned int period_bytes,
+			      unsigned int frames_per_period,
+			      unsigned int periods_per_buffer,
 			      struct audioformat *fmt,
 			      struct snd_usb_endpoint *sync_ep)
 {
-	unsigned int maxsize, i, urb_packs, total_packs, packs_per_ms;
-	int is_playback = usb_pipeout(ep->pipe);
+	unsigned int maxsize, minsize, packs_per_ms, max_packs_per_urb;
+	unsigned int max_packs_per_period, urbs_per_period, urb_packs;
+	unsigned int max_urbs, i;
 	int frame_bits = snd_pcm_format_physical_width(pcm_format) * channels;
 
 	if (pcm_format == SNDRV_PCM_FORMAT_DSD_U16_LE && fmt->dsd_dop) {
@@ -611,58 +620,81 @@ static int data_ep_set_params(struct snd_usb_endpoint *ep,
 	else
 		ep->curpacksize = maxsize;
 
-	if (snd_usb_get_speed(ep->chip->dev) != USB_SPEED_FULL)
+	if (snd_usb_get_speed(ep->chip->dev) != USB_SPEED_FULL) {
 		packs_per_ms = 8 >> ep->datainterval;
-	else
-		packs_per_ms = 1;
-
-	if (is_playback && !snd_usb_endpoint_implicit_feedback_sink(ep)) {
-		urb_packs = max(ep->chip->nrpacks, 1);
-		urb_packs = min(urb_packs, (unsigned int) MAX_PACKS);
+		max_packs_per_urb = MAX_PACKS_HS;
 	} else {
-		urb_packs = 1;
+		packs_per_ms = 1;
+		max_packs_per_urb = MAX_PACKS;
 	}
+	if (sync_ep && !snd_usb_endpoint_implicit_feedback_sink(ep))
+		max_packs_per_urb = min(max_packs_per_urb,
+					1U << sync_ep->syncinterval);
+	max_packs_per_urb = max(1u, max_packs_per_urb >> ep->datainterval);
 
-	urb_packs *= packs_per_ms;
+	/*
+	 * Capture endpoints need to use small URBs because there's no way
+	 * to tell in advance where the next period will end, and we don't
+	 * want the next URB to complete much after the period ends.
+	 *
+	 * Playback endpoints with implicit sync much use the same parameters
+	 * as their corresponding capture endpoint.
+	 */
+	if (usb_pipein(ep->pipe) ||
+			snd_usb_endpoint_implicit_feedback_sink(ep)) {
 
-	if (sync_ep && !snd_usb_endpoint_implicit_feedback_sink(ep))
-		urb_packs = min(urb_packs, 1U << sync_ep->syncinterval);
+		urb_packs = packs_per_ms;
+		/*
+		 * Wireless devices can poll at a max rate of once per 4ms.
+		 * For dataintervals less than 5, increase the packet count to
+		 * allow the host controller to use bursting to fill in the
+		 * gaps.
+		 */
+		if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_WIRELESS) {
+			int interval = ep->datainterval;
+			while (interval < 5) {
+				urb_packs <<= 1;
+				++interval;
+			}
+		}
+		/* make capture URBs <= 1 ms and smaller than a period */
+		urb_packs = min(max_packs_per_urb, urb_packs);
+		while (urb_packs > 1 && urb_packs * maxsize >= period_bytes)
+			urb_packs >>= 1;
+		ep->nurbs = MAX_URBS;
 
-	/* decide how many packets to be used */
-	if (is_playback && !snd_usb_endpoint_implicit_feedback_sink(ep)) {
-		unsigned int minsize, maxpacks;
+	/*
+	 * Playback endpoints without implicit sync are adjusted so that
+	 * a period fits as evenly as possible in the smallest number of
+	 * URBs.  The total number of URBs is adjusted to the size of the
+	 * ALSA buffer, subject to the MAX_URBS and MAX_QUEUE limits.
+	 */
+	} else {
 		/* determine how small a packet can be */
-		minsize = (ep->freqn >> (16 - ep->datainterval))
-			  * (frame_bits >> 3);
+		minsize = (ep->freqn >> (16 - ep->datainterval)) *
+				(frame_bits >> 3);
 		/* with sync from device, assume it can be 12% lower */
 		if (sync_ep)
 			minsize -= minsize >> 3;
 		minsize = max(minsize, 1u);
-		total_packs = (period_bytes + minsize - 1) / minsize;
-		/* we need at least two URBs for queueing */
-		if (total_packs < 2) {
-			total_packs = 2;
-		} else {
-			/* and we don't want too long a queue either */
-			maxpacks = max(MAX_QUEUE * packs_per_ms, urb_packs * 2);
-			total_packs = min(total_packs, maxpacks);
-		}
-	} else {
-		while (urb_packs > 1 && urb_packs * maxsize >= period_bytes)
-			urb_packs >>= 1;
-		total_packs = MAX_URBS * urb_packs;
-	}
 
-	ep->nurbs = (total_packs + urb_packs - 1) / urb_packs;
-	if (ep->nurbs > MAX_URBS) {
-		/* too much... */
-		ep->nurbs = MAX_URBS;
-		total_packs = MAX_URBS * urb_packs;
-	} else if (ep->nurbs < 2) {
-		/* too little - we need at least two packets
-		 * to ensure contiguous playback/capture
-		 */
-		ep->nurbs = 2;
+		/* how many packets will contain an entire ALSA period? */
+		max_packs_per_period = DIV_ROUND_UP(period_bytes, minsize);
+
+		/* how many URBs will contain a period? */
+		urbs_per_period = DIV_ROUND_UP(max_packs_per_period,
+				max_packs_per_urb);
+		/* how many packets are needed in each URB? */
+		urb_packs = DIV_ROUND_UP(max_packs_per_period, urbs_per_period);
+
+		/* limit the number of frames in a single URB */
+		ep->max_urb_frames = DIV_ROUND_UP(frames_per_period,
+					urbs_per_period);
+
+		/* try to use enough URBs to contain an entire ALSA buffer */
+		max_urbs = min((unsigned) MAX_URBS,
+				MAX_QUEUE * packs_per_ms / urb_packs);
+		ep->nurbs = min(max_urbs, urbs_per_period * periods_per_buffer);
 	}
 
 	/* allocate and initialize data urbs */
@@ -670,8 +702,7 @@ static int data_ep_set_params(struct snd_usb_endpoint *ep,
 		struct snd_urb_ctx *u = &ep->urb[i];
 		u->index = i;
 		u->ep = ep;
-		u->packets = (i + 1) * total_packs / ep->nurbs
-			- i * total_packs / ep->nurbs;
+		u->packets = urb_packs;
 		u->buffer_size = maxsize * u->packets;
 
 		if (fmt->fmt_type == UAC_FORMAT_TYPE_II)
@@ -703,8 +734,7 @@ out_of_memory:
 /*
  * configure a sync endpoint
  */
-static int sync_ep_set_params(struct snd_usb_endpoint *ep,
-			      struct audioformat *fmt)
+static int sync_ep_set_params(struct snd_usb_endpoint *ep)
 {
 	int i;
 
@@ -748,6 +778,8 @@ out_of_memory:
  * @pcm_format: the audio fomat.
  * @channels: the number of audio channels.
  * @period_bytes: the number of bytes in one alsa period.
+ * @period_frames: the number of frames in one alsa period.
+ * @buffer_periods: the number of periods in one alsa buffer.
  * @rate: the frame rate.
  * @fmt: the USB audio format information
  * @sync_ep: the sync endpoint to use, if any
@@ -760,6 +792,8 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep,
 				snd_pcm_format_t pcm_format,
 				unsigned int channels,
 				unsigned int period_bytes,
+				unsigned int period_frames,
+				unsigned int buffer_periods,
 				unsigned int rate,
 				struct audioformat *fmt,
 				struct snd_usb_endpoint *sync_ep)
@@ -767,8 +801,9 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep,
 	int err;
 
 	if (ep->use_count != 0) {
-		snd_printk(KERN_WARNING "Unable to change format on ep #%x: already in use\n",
-			   ep->ep_num);
+		usb_audio_warn(ep->chip,
+			 "Unable to change format on ep #%x: already in use\n",
+			 ep->ep_num);
 		return -EBUSY;
 	}
 
@@ -793,17 +828,19 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep,
 	switch (ep->type) {
 	case  SND_USB_ENDPOINT_TYPE_DATA:
 		err = data_ep_set_params(ep, pcm_format, channels,
-					 period_bytes, fmt, sync_ep);
+					 period_bytes, period_frames,
+					 buffer_periods, fmt, sync_ep);
 		break;
 	case  SND_USB_ENDPOINT_TYPE_SYNC:
-		err = sync_ep_set_params(ep, fmt);
+		err = sync_ep_set_params(ep);
 		break;
 	default:
 		err = -EINVAL;
 	}
 
-	snd_printdd(KERN_DEBUG "Setting params for ep #%x (type %d, %d urbs), ret=%d\n",
-		   ep->ep_num, ep->type, ep->nurbs, err);
+	usb_audio_dbg(ep->chip,
+		"Setting params for ep #%x (type %d, %d urbs), ret=%d\n",
+		ep->ep_num, ep->type, ep->nurbs, err);
 
 	return err;
 }
@@ -878,8 +915,9 @@ int snd_usb_endpoint_start(struct snd_usb_endpoint *ep, bool can_sleep)
 
 		err = usb_submit_urb(urb, GFP_ATOMIC);
 		if (err < 0) {
-			snd_printk(KERN_ERR "cannot submit urb %d, error %d: %s\n",
-				   i, err, usb_error_string(err));
+			usb_audio_err(ep->chip,
+				"cannot submit urb %d, error %d: %s\n",
+				i, err, usb_error_string(err));
 			goto __error;
 		}
 		set_bit(i, &ep->active_mask);
@@ -931,28 +969,34 @@ void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep)
  *
  * @ep: the endpoint to deactivate
  *
- * If the endpoint is not currently in use, this functions will select the
- * alternate interface setting 0 for the interface of this endpoint.
+ * If the endpoint is not currently in use, this functions will
+ * deactivate its associated URBs.
  *
  * In case of any active users, this functions does nothing.
- *
- * Returns an error if usb_set_interface() failed, 0 in all other
- * cases.
  */
-int snd_usb_endpoint_deactivate(struct snd_usb_endpoint *ep)
+void snd_usb_endpoint_deactivate(struct snd_usb_endpoint *ep)
 {
 	if (!ep)
-		return -EINVAL;
-
-	deactivate_urbs(ep, true);
-	wait_clear_urbs(ep);
+		return;
 
 	if (ep->use_count != 0)
-		return 0;
+		return;
 
-	clear_bit(EP_FLAG_ACTIVATED, &ep->flags);
+	deactivate_urbs(ep, true);
+	wait_clear_urbs(ep);
+}
 
-	return 0;
+/**
+ * snd_usb_endpoint_release: Tear down an snd_usb_endpoint
+ *
+ * @ep: the endpoint to release
+ *
+ * This function does not care for the endpoint's use count but will tear
+ * down all the streaming URBs immediately.
+ */
+void snd_usb_endpoint_release(struct snd_usb_endpoint *ep)
+{
+	release_urbs(ep, 1);
 }
 
 /**
@@ -960,15 +1004,13 @@ int snd_usb_endpoint_deactivate(struct snd_usb_endpoint *ep)
  *
  * @ep: the list header of the endpoint to free
  *
- * This function does not care for the endpoint's use count but will tear
- * down all the streaming URBs immediately and free all resources.
+ * This free all resources of the given ep.
  */
 void snd_usb_endpoint_free(struct list_head *head)
 {
 	struct snd_usb_endpoint *ep;
 
 	ep = list_entry(head, struct snd_usb_endpoint, list);
-	release_urbs(ep, 1);
 	kfree(ep);
 }
 
@@ -1078,7 +1120,16 @@ void snd_usb_handle_sync_urb(struct snd_usb_endpoint *ep,
 	if (f == 0)
 		return;
 
-	if (unlikely(ep->freqshift == INT_MIN)) {
+	if (unlikely(sender->udh01_fb_quirk)) {
+		/*
+		 * The TEAC UD-H01 firmware sometimes changes the feedback value
+		 * by +/- 0x1.0000.
+		 */
+		if (f < ep->freqn - 0x8000)
+			f += 0x10000;
+		else if (f > ep->freqn + 0x8000)
+			f -= 0x10000;
+	} else if (unlikely(ep->freqshift == INT_MIN)) {
 		/*
 		 * The first time we see a feedback value, determine its format
 		 * by shifting it left or right until it matches the nominal