diff options
Diffstat (limited to 'sound/pci/vx222/vx222_ops.c')
| -rw-r--r-- | sound/pci/vx222/vx222_ops.c | 49 |
1 files changed, 33 insertions, 16 deletions
diff --git a/sound/pci/vx222/vx222_ops.c b/sound/pci/vx222/vx222_ops.c index 55558bef716..2d1570273e9 100644 --- a/sound/pci/vx222/vx222_ops.c +++ b/sound/pci/vx222/vx222_ops.c @@ -20,7 +20,6 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <sound/driver.h> #include <linux/delay.h> #include <linux/device.h> #include <linux/firmware.h> @@ -108,7 +107,9 @@ static unsigned char vx2_inb(struct vx_core *chip, int offset) static void vx2_outb(struct vx_core *chip, int offset, unsigned char val) { outb(val, vx2_reg_addr(chip, offset)); - //printk("outb: %x -> %x\n", val, vx2_reg_addr(chip, offset)); + /* + dev_dbg(chip->card->dev, "outb: %x -> %x\n", val, vx2_reg_addr(chip, offset)); + */ } /** @@ -127,7 +128,9 @@ static unsigned int vx2_inl(struct vx_core *chip, int offset) */ static void vx2_outl(struct vx_core *chip, int offset, unsigned int val) { - // printk("outl: %x -> %x\n", val, vx2_reg_addr(chip, offset)); + /* + dev_dbg(chip->card->dev, "outl: %x -> %x\n", val, vx2_reg_addr(chip, offset)); + */ outl(val, vx2_reg_addr(chip, offset)); } @@ -170,7 +173,7 @@ static int vx2_test_xilinx(struct vx_core *_chip) struct snd_vx222 *chip = (struct snd_vx222 *)_chip; unsigned int data; - snd_printdd("testing xilinx...\n"); + dev_dbg(_chip->card->dev, "testing xilinx...\n"); /* This test uses several write/read sequences on TEST0 and TEST1 bits * to figure out whever or not the xilinx was correctly loaded */ @@ -180,7 +183,7 @@ static int vx2_test_xilinx(struct vx_core *_chip) vx_inl(chip, ISR); data = vx_inl(chip, STATUS); if ((data & VX_STATUS_VAL_TEST0_MASK) == VX_STATUS_VAL_TEST0_MASK) { - snd_printdd("bad!\n"); + dev_dbg(_chip->card->dev, "bad!\n"); return -ENODEV; } @@ -189,7 +192,7 @@ static int vx2_test_xilinx(struct vx_core *_chip) vx_inl(chip, ISR); data = vx_inl(chip, STATUS); if (! (data & VX_STATUS_VAL_TEST0_MASK)) { - snd_printdd("bad! #2\n"); + dev_dbg(_chip->card->dev, "bad! #2\n"); return -ENODEV; } @@ -200,7 +203,7 @@ static int vx2_test_xilinx(struct vx_core *_chip) vx_inl(chip, ISR); data = vx_inl(chip, STATUS); if ((data & VX_STATUS_VAL_TEST1_MASK) == VX_STATUS_VAL_TEST1_MASK) { - snd_printdd("bad! #3\n"); + dev_dbg(_chip->card->dev, "bad! #3\n"); return -ENODEV; } @@ -209,11 +212,11 @@ static int vx2_test_xilinx(struct vx_core *_chip) vx_inl(chip, ISR); data = vx_inl(chip, STATUS); if (! (data & VX_STATUS_VAL_TEST1_MASK)) { - snd_printdd("bad! #4\n"); + dev_dbg(_chip->card->dev, "bad! #4\n"); return -ENODEV; } } - snd_printdd("ok, xilinx fine.\n"); + dev_dbg(_chip->card->dev, "ok, xilinx fine.\n"); return 0; } @@ -254,7 +257,8 @@ static void vx2_dma_write(struct vx_core *chip, struct snd_pcm_runtime *runtime, int offset = pipe->hw_ptr; u32 *addr = (u32 *)(runtime->dma_area + offset); - snd_assert(count % 4 == 0, return); + if (snd_BUG_ON(count % 4)) + return; vx2_setup_pseudo_dma(chip, 1); @@ -292,7 +296,8 @@ static void vx2_dma_read(struct vx_core *chip, struct snd_pcm_runtime *runtime, u32 *addr = (u32 *)(runtime->dma_area + offset); unsigned long port = vx2_reg_addr(chip, VX_DMA); - snd_assert(count % 4 == 0, return); + if (snd_BUG_ON(count % 4)) + return; vx2_setup_pseudo_dma(chip, 0); /* Transfer using pseudo-dma. @@ -360,9 +365,9 @@ static int vx2_load_xilinx_binary(struct vx_core *chip, const struct firmware *x { unsigned int i; unsigned int port; - unsigned char *image; + const unsigned char *image; - /* XILINX reset (wait at least 1 milisecond between reset on and off). */ + /* XILINX reset (wait at least 1 millisecond between reset on and off). */ vx_outl(chip, CNTRL, VX_CNTRL_REGISTER_VALUE | VX_XILINX_RESET_MASK); vx_inl(chip, CNTRL); msleep(10); @@ -392,7 +397,8 @@ static int vx2_load_xilinx_binary(struct vx_core *chip, const struct firmware *x i = vx_inl(chip, GPIOC); if (i & 0x0100) return 0; - snd_printk(KERN_ERR "vx222: xilinx test failed after load, GPIOC=0x%x\n", i); + dev_err(chip->card->dev, + "xilinx test failed after load, GPIOC=0x%x\n", i); return -EINVAL; } @@ -676,7 +682,8 @@ static void vx2_write_akm(struct vx_core *chip, int reg, unsigned int data) a look up table, as there is no linear matching between the driver codec values and the real dBu value */ - snd_assert(data < sizeof(vx2_akm_gains_lut), return); + if (snd_BUG_ON(data >= sizeof(vx2_akm_gains_lut))) + return; switch (reg) { case XX_CODEC_LEVEL_LEFT_REGISTER: @@ -824,7 +831,8 @@ static void vx2_set_input_level(struct snd_vx222 *chip) preamp++; /* raise pre ampli + 18dB */ miclevel -= (18 * 2); /* lower level 18 dB (*2 because of 0.5 dB steps !) */ } - snd_assert(preamp < 4, return); + if (snd_BUG_ON(preamp >= 4)) + return; /* set pre-amp level */ chip->regSELMIC &= ~MICRO_SELECT_PREAMPLI_MASK; @@ -877,6 +885,12 @@ static int vx_input_level_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem { struct vx_core *_chip = snd_kcontrol_chip(kcontrol); struct snd_vx222 *chip = (struct snd_vx222 *)_chip; + if (ucontrol->value.integer.value[0] < 0 || + ucontrol->value.integer.value[0] > MIC_LEVEL_MAX) + return -EINVAL; + if (ucontrol->value.integer.value[1] < 0 || + ucontrol->value.integer.value[1] > MIC_LEVEL_MAX) + return -EINVAL; mutex_lock(&_chip->mixer_mutex); if (chip->input_level[0] != ucontrol->value.integer.value[0] || chip->input_level[1] != ucontrol->value.integer.value[1]) { @@ -912,6 +926,9 @@ static int vx_mic_level_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_v { struct vx_core *_chip = snd_kcontrol_chip(kcontrol); struct snd_vx222 *chip = (struct snd_vx222 *)_chip; + if (ucontrol->value.integer.value[0] < 0 || + ucontrol->value.integer.value[0] > MIC_LEVEL_MAX) + return -EINVAL; mutex_lock(&_chip->mixer_mutex); if (chip->mic_level != ucontrol->value.integer.value[0]) { chip->mic_level = ucontrol->value.integer.value[0]; |
