aboutsummaryrefslogtreecommitdiff
path: root/sound/pci/maestro3.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/pci/maestro3.c')
-rw-r--r--sound/pci/maestro3.c182
1 files changed, 55 insertions, 127 deletions
diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c
index 78229b0dad2..0d3ea3e7995 100644
--- a/sound/pci/maestro3.c
+++ b/sound/pci/maestro3.c
@@ -361,74 +361,6 @@ MODULE_PARM_DESC(amp_gpio, "GPIO pin number for external amp. (default = -1)");
#define DSP2HOST_REQ_I2SRATE 0x02
#define DSP2HOST_REQ_TIMER 0x04
-/* AC97 registers */
-/* XXX fix this crap up */
-/*#define AC97_RESET 0x00*/
-
-#define AC97_VOL_MUTE_B 0x8000
-#define AC97_VOL_M 0x1F
-#define AC97_LEFT_VOL_S 8
-
-#define AC97_MASTER_VOL 0x02
-#define AC97_LINE_LEVEL_VOL 0x04
-#define AC97_MASTER_MONO_VOL 0x06
-#define AC97_PC_BEEP_VOL 0x0A
-#define AC97_PC_BEEP_VOL_M 0x0F
-#define AC97_SROUND_MASTER_VOL 0x38
-#define AC97_PC_BEEP_VOL_S 1
-
-/*#define AC97_PHONE_VOL 0x0C
-#define AC97_MIC_VOL 0x0E*/
-#define AC97_MIC_20DB_ENABLE 0x40
-
-/*#define AC97_LINEIN_VOL 0x10
-#define AC97_CD_VOL 0x12
-#define AC97_VIDEO_VOL 0x14
-#define AC97_AUX_VOL 0x16*/
-#define AC97_PCM_OUT_VOL 0x18
-/*#define AC97_RECORD_SELECT 0x1A*/
-#define AC97_RECORD_MIC 0x00
-#define AC97_RECORD_CD 0x01
-#define AC97_RECORD_VIDEO 0x02
-#define AC97_RECORD_AUX 0x03
-#define AC97_RECORD_MONO_MUX 0x02
-#define AC97_RECORD_DIGITAL 0x03
-#define AC97_RECORD_LINE 0x04
-#define AC97_RECORD_STEREO 0x05
-#define AC97_RECORD_MONO 0x06
-#define AC97_RECORD_PHONE 0x07
-
-/*#define AC97_RECORD_GAIN 0x1C*/
-#define AC97_RECORD_VOL_M 0x0F
-
-/*#define AC97_GENERAL_PURPOSE 0x20*/
-#define AC97_POWER_DOWN_CTRL 0x26
-#define AC97_ADC_READY 0x0001
-#define AC97_DAC_READY 0x0002
-#define AC97_ANALOG_READY 0x0004
-#define AC97_VREF_ON 0x0008
-#define AC97_PR0 0x0100
-#define AC97_PR1 0x0200
-#define AC97_PR2 0x0400
-#define AC97_PR3 0x0800
-#define AC97_PR4 0x1000
-
-#define AC97_RESERVED1 0x28
-
-#define AC97_VENDOR_TEST 0x5A
-
-#define AC97_CLOCK_DELAY 0x5C
-#define AC97_LINEOUT_MUX_SEL 0x0001
-#define AC97_MONO_MUX_SEL 0x0002
-#define AC97_CLOCK_DELAY_SEL 0x1F
-#define AC97_DAC_CDS_SHIFT 6
-#define AC97_ADC_CDS_SHIFT 11
-
-#define AC97_MULTI_CHANNEL_SEL 0x74
-
-/*#define AC97_VENDOR_ID1 0x7C
-#define AC97_VENDOR_ID2 0x7E*/
-
/*
* ASSP control regs
*/
@@ -857,7 +789,7 @@ struct snd_m3 {
unsigned int in_suspend;
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
u16 *suspend_mem;
#endif
@@ -890,7 +822,7 @@ static DEFINE_PCI_DEVICE_TABLE(snd_m3_ids) = {
MODULE_DEVICE_TABLE(pci, snd_m3_ids);
-static struct snd_pci_quirk m3_amp_quirk_list[] __devinitdata = {
+static struct snd_pci_quirk m3_amp_quirk_list[] = {
SND_PCI_QUIRK(0x0E11, 0x0094, "Compaq Evo N600c", 0x0c),
SND_PCI_QUIRK(0x10f7, 0x833e, "Panasonic CF-28", 0x0d),
SND_PCI_QUIRK(0x10f7, 0x833d, "Panasonic CF-72", 0x0d),
@@ -899,7 +831,7 @@ static struct snd_pci_quirk m3_amp_quirk_list[] __devinitdata = {
{ } /* END */
};
-static struct snd_pci_quirk m3_irda_quirk_list[] __devinitdata = {
+static struct snd_pci_quirk m3_irda_quirk_list[] = {
SND_PCI_QUIRK(0x1028, 0x00b0, "Dell Inspiron 4000", 1),
SND_PCI_QUIRK(0x1028, 0x00a4, "Dell Inspiron 8000", 1),
SND_PCI_QUIRK(0x1028, 0x00e6, "Dell Inspiron 8100", 1),
@@ -907,7 +839,7 @@ static struct snd_pci_quirk m3_irda_quirk_list[] __devinitdata = {
};
/* hardware volume quirks */
-static struct snd_pci_quirk m3_hv_quirk_list[] __devinitdata = {
+static struct snd_pci_quirk m3_hv_quirk_list[] = {
/* Allegro chips */
SND_PCI_QUIRK(0x0E11, 0x002E, NULL, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD),
SND_PCI_QUIRK(0x0E11, 0x0094, NULL, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD),
@@ -985,7 +917,7 @@ static struct snd_pci_quirk m3_hv_quirk_list[] __devinitdata = {
};
/* HP Omnibook quirks */
-static struct snd_pci_quirk m3_omnibook_quirk_list[] __devinitdata = {
+static struct snd_pci_quirk m3_omnibook_quirk_list[] = {
SND_PCI_QUIRK_ID(0x103c, 0x0010), /* HP OmniBook 6000 */
SND_PCI_QUIRK_ID(0x103c, 0x0011), /* HP OmniBook 500 */
{ } /* END */
@@ -1471,7 +1403,7 @@ static int snd_m3_pcm_hw_params(struct snd_pcm_substream *substream,
/* set buffer address */
s->buffer_addr = substream->runtime->dma_addr;
if (s->buffer_addr & 0x3) {
- snd_printk(KERN_ERR "oh my, not aligned\n");
+ dev_err(substream->pcm->card->dev, "oh my, not aligned\n");
s->buffer_addr = s->buffer_addr & ~0x3;
}
return 0;
@@ -1924,7 +1856,7 @@ static struct snd_pcm_ops snd_m3_capture_ops = {
.pointer = snd_m3_pcm_pointer,
};
-static int __devinit
+static int
snd_m3_pcm(struct snd_m3 * chip, int device)
{
struct snd_pcm *pcm;
@@ -1968,7 +1900,7 @@ static int snd_m3_ac97_wait(struct snd_m3 *chip)
cpu_relax();
} while (i-- > 0);
- snd_printk(KERN_ERR "ac97 serial bus busy\n");
+ dev_err(chip->card->dev, "ac97 serial bus busy\n");
return 1;
}
@@ -2083,7 +2015,8 @@ static void snd_m3_ac97_reset(struct snd_m3 *chip)
delay1 += 10;
delay2 += 100;
- snd_printd("maestro3: retrying codec reset with delays of %d and %d ms\n",
+ dev_dbg(chip->card->dev,
+ "retrying codec reset with delays of %d and %d ms\n",
delay1, delay2);
}
@@ -2099,7 +2032,7 @@ static void snd_m3_ac97_reset(struct snd_m3 *chip)
#endif
}
-static int __devinit snd_m3_mixer(struct snd_m3 *chip)
+static int snd_m3_mixer(struct snd_m3 *chip)
{
struct snd_ac97_bus *pbus;
struct snd_ac97_template ac97;
@@ -2241,7 +2174,7 @@ static void snd_m3_assp_init(struct snd_m3 *chip)
}
-static int __devinit snd_m3_assp_client_init(struct snd_m3 *chip, struct m3_dma *s, int index)
+static int snd_m3_assp_client_init(struct snd_m3 *chip, struct m3_dma *s, int index)
{
int data_bytes = 2 * ( MINISRC_TMP_BUFFER_SIZE / 2 +
MINISRC_IN_BUFFER_SIZE / 2 +
@@ -2262,7 +2195,8 @@ static int __devinit snd_m3_assp_client_init(struct snd_m3 *chip, struct m3_dma
address = 0x1100 + ((data_bytes/2) * index);
if ((address + (data_bytes/2)) >= 0x1c00) {
- snd_printk(KERN_ERR "no memory for %d bytes at ind %d (addr 0x%x)\n",
+ dev_err(chip->card->dev,
+ "no memory for %d bytes at ind %d (addr 0x%x)\n",
data_bytes, index, address);
return -ENOMEM;
}
@@ -2436,7 +2370,7 @@ static int snd_m3_free(struct snd_m3 *chip)
outw(0, chip->iobase + HOST_INT_CTRL); /* disable ints */
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
vfree(chip->suspend_mem);
#endif
@@ -2458,10 +2392,11 @@ static int snd_m3_free(struct snd_m3 *chip)
/*
* APM support
*/
-#ifdef CONFIG_PM
-static int m3_suspend(struct pci_dev *pci, pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int m3_suspend(struct device *dev)
{
- struct snd_card *card = pci_get_drvdata(pci);
+ struct pci_dev *pci = to_pci_dev(dev);
+ struct snd_card *card = dev_get_drvdata(dev);
struct snd_m3 *chip = card->private_data;
int i, dsp_index;
@@ -2489,13 +2424,14 @@ static int m3_suspend(struct pci_dev *pci, pm_message_t state)
pci_disable_device(pci);
pci_save_state(pci);
- pci_set_power_state(pci, pci_choose_state(pci, state));
+ pci_set_power_state(pci, PCI_D3hot);
return 0;
}
-static int m3_resume(struct pci_dev *pci)
+static int m3_resume(struct device *dev)
{
- struct snd_card *card = pci_get_drvdata(pci);
+ struct pci_dev *pci = to_pci_dev(dev);
+ struct snd_card *card = dev_get_drvdata(dev);
struct snd_m3 *chip = card->private_data;
int i, dsp_index;
@@ -2505,8 +2441,7 @@ static int m3_resume(struct pci_dev *pci)
pci_set_power_state(pci, PCI_D0);
pci_restore_state(pci);
if (pci_enable_device(pci) < 0) {
- printk(KERN_ERR "maestor3: pci_enable_device failed, "
- "disabling device\n");
+ dev_err(dev, "pci_enable_device failed, disabling device\n");
snd_card_disconnect(card);
return -EIO;
}
@@ -2546,10 +2481,15 @@ static int m3_resume(struct pci_dev *pci)
chip->in_suspend = 0;
return 0;
}
-#endif /* CONFIG_PM */
+
+static SIMPLE_DEV_PM_OPS(m3_pm, m3_suspend, m3_resume);
+#define M3_PM_OPS &m3_pm
+#else
+#define M3_PM_OPS NULL
+#endif /* CONFIG_PM_SLEEP */
#ifdef CONFIG_SND_MAESTRO3_INPUT
-static int __devinit snd_m3_input_register(struct snd_m3 *chip)
+static int snd_m3_input_register(struct snd_m3 *chip)
{
struct input_dev *input_dev;
int err;
@@ -2593,7 +2533,7 @@ static int snd_m3_dev_free(struct snd_device *device)
return snd_m3_free(chip);
}
-static int __devinit
+static int
snd_m3_create(struct snd_card *card, struct pci_dev *pci,
int enable_amp,
int amp_gpio,
@@ -2614,7 +2554,8 @@ snd_m3_create(struct snd_card *card, struct pci_dev *pci,
/* check, if we can restrict PCI DMA transfers to 28 bits */
if (pci_set_dma_mask(pci, DMA_BIT_MASK(28)) < 0 ||
pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(28)) < 0) {
- snd_printk(KERN_ERR "architecture does not support 28bit PCI busmaster DMA\n");
+ dev_err(card->dev,
+ "architecture does not support 28bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
}
@@ -2647,8 +2588,8 @@ snd_m3_create(struct snd_card *card, struct pci_dev *pci,
else {
quirk = snd_pci_quirk_lookup(pci, m3_amp_quirk_list);
if (quirk) {
- snd_printdd(KERN_INFO "maestro3: set amp-gpio "
- "for '%s'\n", quirk->name);
+ dev_info(card->dev, "set amp-gpio for '%s'\n",
+ snd_pci_quirk_name(quirk));
chip->amp_gpio = quirk->value;
} else if (chip->allegro_flag)
chip->amp_gpio = GPO_EXT_AMP_ALLEGRO;
@@ -2658,8 +2599,8 @@ snd_m3_create(struct snd_card *card, struct pci_dev *pci,
quirk = snd_pci_quirk_lookup(pci, m3_irda_quirk_list);
if (quirk) {
- snd_printdd(KERN_INFO "maestro3: enabled irda workaround "
- "for '%s'\n", quirk->name);
+ dev_info(card->dev, "enabled irda workaround for '%s'\n",
+ snd_pci_quirk_name(quirk));
chip->irda_workaround = 1;
}
quirk = snd_pci_quirk_lookup(pci, m3_hv_quirk_list);
@@ -2711,16 +2652,16 @@ snd_m3_create(struct snd_card *card, struct pci_dev *pci,
if (request_irq(pci->irq, snd_m3_interrupt, IRQF_SHARED,
KBUILD_MODNAME, chip)) {
- snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
+ dev_err(card->dev, "unable to grab IRQ %d\n", pci->irq);
snd_m3_free(chip);
return -ENOMEM;
}
chip->irq = pci->irq;
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
chip->suspend_mem = vmalloc(sizeof(u16) * (REV_B_CODE_MEMORY_LENGTH + REV_B_DATA_MEMORY_LENGTH));
if (chip->suspend_mem == NULL)
- snd_printk(KERN_WARNING "can't allocate apm buffer\n");
+ dev_warn(card->dev, "can't allocate apm buffer\n");
#endif
if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0) {
@@ -2744,16 +2685,15 @@ snd_m3_create(struct snd_card *card, struct pci_dev *pci,
if (chip->hv_config & HV_CTRL_ENABLE) {
err = snd_m3_input_register(chip);
if (err)
- snd_printk(KERN_WARNING "Input device registration "
- "failed with error %i", err);
+ dev_warn(card->dev,
+ "Input device registration failed with error %i",
+ err);
}
#endif
snd_m3_enable_ints(chip);
snd_m3_assp_continue(chip);
- snd_card_set_dev(card, &pci->dev);
-
*chip_ret = chip;
return 0;
@@ -2761,7 +2701,7 @@ snd_m3_create(struct snd_card *card, struct pci_dev *pci,
/*
*/
-static int __devinit
+static int
snd_m3_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
{
static int dev;
@@ -2780,7 +2720,8 @@ snd_m3_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
return -ENOENT;
}
- err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
+ err = snd_card_new(&pci->dev, index[dev], id[dev], THIS_MODULE,
+ 0, &card);
if (err < 0)
return err;
@@ -2823,7 +2764,7 @@ snd_m3_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
MPU401_INFO_INTEGRATED | MPU401_INFO_IRQ_HOOK,
-1, &chip->rmidi);
if (err < 0)
- printk(KERN_WARNING "maestro3: no MIDI support.\n");
+ dev_warn(card->dev, "no MIDI support.\n");
#endif
pci_set_drvdata(pci, card);
@@ -2831,32 +2772,19 @@ snd_m3_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
return 0;
}
-static void __devexit snd_m3_remove(struct pci_dev *pci)
+static void snd_m3_remove(struct pci_dev *pci)
{
snd_card_free(pci_get_drvdata(pci));
- pci_set_drvdata(pci, NULL);
}
-static struct pci_driver driver = {
+static struct pci_driver m3_driver = {
.name = KBUILD_MODNAME,
.id_table = snd_m3_ids,
.probe = snd_m3_probe,
- .remove = __devexit_p(snd_m3_remove),
-#ifdef CONFIG_PM
- .suspend = m3_suspend,
- .resume = m3_resume,
-#endif
+ .remove = snd_m3_remove,
+ .driver = {
+ .pm = M3_PM_OPS,
+ },
};
-static int __init alsa_card_m3_init(void)
-{
- return pci_register_driver(&driver);
-}
-
-static void __exit alsa_card_m3_exit(void)
-{
- pci_unregister_driver(&driver);
-}
-
-module_init(alsa_card_m3_init)
-module_exit(alsa_card_m3_exit)
+module_pci_driver(m3_driver);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-09 22:41:33 +0000