diff options
Diffstat (limited to 'sound/pci/Kconfig')
| -rw-r--r-- | sound/pci/Kconfig | 188 |
1 files changed, 153 insertions, 35 deletions
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig index 82b9bddcdcd..3a3a3a71088 100644 --- a/sound/pci/Kconfig +++ b/sound/pci/Kconfig @@ -25,6 +25,7 @@ config SND_ALS300 select SND_PCM select SND_AC97_CODEC select SND_OPL3_LIB + select ZONE_DMA help Say 'Y' or 'M' to include support for Avance Logic ALS300/ALS300+ @@ -49,6 +50,7 @@ config SND_ALI5451 tristate "ALi M5451 PCI Audio Controller" select SND_MPU401_UART select SND_AC97_CODEC + select ZONE_DMA help Say Y here to include support for the integrated AC97 sound device on motherboards using the ALi M5451 Audio Controller @@ -58,6 +60,18 @@ config SND_ALI5451 To compile this driver as a module, choose M here: the module will be called snd-ali5451. +config SND_ASIHPI + tristate "AudioScience ASIxxxx" + depends on X86 + select FW_LOADER + select SND_PCM + select SND_HWDEP + help + Say Y here to include support for AudioScience ASI sound cards. + + To compile this driver as a module, choose M here: the module + will be called snd-asihpi. + config SND_ATIIXP tristate "ATI IXP AC97 Controller" select SND_AC97_CODEC @@ -135,15 +149,22 @@ config SND_AW2 config SND_AZT3328 - tristate "Aztech AZF3328 / PCI168 (EXPERIMENTAL)" - depends on EXPERIMENTAL + tristate "Aztech AZF3328 / PCI168" select SND_OPL3_LIB select SND_MPU401_UART select SND_PCM + select SND_RAWMIDI + select SND_AC97_CODEC + select ZONE_DMA help Say Y here to include support for Aztech AZF3328 (PCI168) soundcards. + Supported features: AC97-"conformant" mixer, MPU401/OPL3, analog I/O + (16bit/8bit, many sample rates [<= 66.2kHz], NO hardware mixing), + Digital Enhanced Game Port, 1.024MHz multimedia sequencer timer, + ext. codec (I2S port), onboard amp (4W/4Ohms/ch), suspend/resume. + To compile this driver as a module, choose M here: the module will be called snd-azt3328. @@ -195,23 +216,28 @@ config SND_CMIPCI config SND_OXYGEN_LIB tristate - select SND_PCM - select SND_MPU401_UART config SND_OXYGEN - tristate "C-Media 8788 (Oxygen)" + tristate "C-Media 8786, 8787, 8788 (Oxygen)" select SND_OXYGEN_LIB + select SND_PCM + select SND_MPU401_UART help Say Y here to include support for sound cards based on the C-Media CMI8788 (Oxygen HD Audio) chip: * Asound A-8788 + * Asus Xonar DG/DGX * AuzenTech X-Meridian + * AuzenTech X-Meridian 2G * Bgears b-Enspirer * Club3D Theatron DTS * HT-Omega Claro (plus) * HT-Omega Claro halo (XT) + * Kuroutoshikou CMI8787-HG2PCI * Razer Barracuda AC-1 * Sondigo Inferno + * TempoTec/MediaTek HiFier Fantasia + * TempoTec/MediaTek HiFier Serenade To compile this driver as a module, choose M here: the module will be called snd-oxygen. @@ -231,6 +257,7 @@ config SND_CS46XX tristate "Cirrus Logic (Sound Fusion) CS4280/CS461x/CS462x/CS463x" select SND_RAWMIDI select SND_AC97_CODEC + select FW_LOADER help Say Y here to include support for Cirrus Logic CS4610/CS4612/ CS4614/CS4615/CS4622/CS4624/CS4630/CS4280 chips. @@ -249,7 +276,7 @@ config SND_CS46XX_NEW_DSP config SND_CS5530 tristate "CS5530 Audio" - depends on ISA_DMA_API + depends on ISA_DMA_API && (X86_32 || COMPILE_TEST) select SND_SB16_DSP help Say Y here to include support for audio on Cyrix/NatSemi CS5530 chips. @@ -259,7 +286,7 @@ config SND_CS5530 config SND_CS5535AUDIO tristate "CS5535/CS5536 Audio" - depends on X86 && !X86_64 + depends on X86_32 || MIPS || COMPILE_TEST select SND_PCM select SND_AC97_CODEC help @@ -275,6 +302,16 @@ config SND_CS5535AUDIO To compile this driver as a module, choose M here: the module will be called snd-cs5535audio. +config SND_CTXFI + tristate "Creative Sound Blaster X-Fi" + select SND_PCM + help + If you want to use soundcards based on Creative Sound Blastr X-Fi + boards with 20k1 or 20k2 chips, say Y here. + + To compile this driver as a module, choose M here: the module + will be called snd-ctxfi. + config SND_DARLA20 tristate "(Echoaudio) Darla20" select FW_LOADER @@ -400,12 +437,33 @@ config SND_INDIGODJ To compile this driver as a module, choose M here: the module will be called snd-indigodj +config SND_INDIGOIOX + tristate "(Echoaudio) Indigo IOx" + select FW_LOADER + select SND_PCM + help + Say 'Y' or 'M' to include support for Echoaudio Indigo IOx. + + To compile this driver as a module, choose M here: the module + will be called snd-indigoiox + +config SND_INDIGODJX + tristate "(Echoaudio) Indigo DJx" + select FW_LOADER + select SND_PCM + help + Say 'Y' or 'M' to include support for Echoaudio Indigo DJx. + + To compile this driver as a module, choose M here: the module + will be called snd-indigodjx + config SND_EMU10K1 tristate "Emu10k1 (SB Live!, Audigy, E-mu APS)" select FW_LOADER select SND_HWDEP select SND_RAWMIDI select SND_AC97_CODEC + select ZONE_DMA help Say Y to include support for Sound Blaster PCI 512, Live!, Audigy and E-mu APS (partially supported) soundcards. @@ -421,6 +479,7 @@ config SND_EMU10K1X tristate "Emu10k1X (Dell OEM Version)" select SND_AC97_CODEC select SND_RAWMIDI + select ZONE_DMA help Say Y here to include support for the Dell OEM version of the Sound Blaster Live!. @@ -454,6 +513,7 @@ config SND_ES1938 select SND_OPL3_LIB select SND_MPU401_UART select SND_AC97_CODEC + select ZONE_DMA help Say Y here to include support for soundcards based on ESS Solo-1 (ES1938, ES1946, ES1969) chips. @@ -465,6 +525,7 @@ config SND_ES1968 tristate "ESS ES1968/1978 (Maestro-1/2/2E)" select SND_MPU401_UART select SND_AC97_CODEC + select ZONE_DMA help Say Y here to include support for soundcards based on ESS Maestro 1/2/2E chips. @@ -472,6 +533,28 @@ config SND_ES1968 To compile this driver as a module, choose M here: the module will be called snd-es1968. +config SND_ES1968_INPUT + bool "Enable input device for es1968 volume buttons" + depends on SND_ES1968 + depends on INPUT=y || INPUT=SND_ES1968 + help + If you say Y here, you will get an input device which reports + keypresses for the volume buttons connected to the es1968 chip. + If you say N the buttons will directly control the master volume. + It is recommended to say Y. + +config SND_ES1968_RADIO + bool "Enable TEA5757 radio tuner support for es1968" + depends on SND_ES1968 + depends on MEDIA_RADIO_SUPPORT + depends on VIDEO_V4L2=y || VIDEO_V4L2=SND_ES1968 + select RADIO_ADAPTERS + select RADIO_TEA575X + + help + Say Y here to include support for TEA5757 radio tuner integrated on + some MediaForte cards (e.g. SF64-PCE2). + config SND_FM801 tristate "ForteMedia FM801" select SND_OPL3_LIB @@ -487,21 +570,18 @@ config SND_FM801 config SND_FM801_TEA575X_BOOL bool "ForteMedia FM801 + TEA5757 tuner" depends on SND_FM801 - depends on VIDEO_V4L1=y || VIDEO_V4L1=SND_FM801 + depends on MEDIA_RADIO_SUPPORT + depends on VIDEO_V4L2=y || VIDEO_V4L2=SND_FM801 + select RADIO_ADAPTERS + select RADIO_TEA575X help Say Y here to include support for soundcards based on the ForteMedia - FM801 chip with a TEA5757 tuner connected to GPIO1-3 pins (Media - Forte SF256-PCS-02) into the snd-fm801 driver. - -config SND_FM801_TEA575X - tristate - depends on SND_FM801_TEA575X_BOOL - default SND_FM801 - -source "sound/pci/hda/Kconfig" + FM801 chip with a TEA5757 tuner (MediaForte SF256-PCS, SF256-PCP and + SF64-PCR) into the snd-fm801 driver. config SND_HDSP tristate "RME Hammerfall DSP Audio" + select FW_LOADER select SND_HWDEP select SND_RAWMIDI select SND_PCM @@ -512,32 +592,27 @@ config SND_HDSP To compile this driver as a module, choose M here: the module will be called snd-hdsp. +comment "Don't forget to add built-in firmwares for HDSP driver" + depends on SND_HDSP=y + config SND_HDSPM - tristate "RME Hammerfall DSP MADI" + tristate "RME Hammerfall DSP MADI/RayDAT/AIO" select SND_HWDEP select SND_RAWMIDI select SND_PCM help - Say Y here to include support for RME Hammerfall DSP MADI - soundcards. + Say Y here to include support for RME Hammerfall DSP MADI, + RayDAT and AIO soundcards. To compile this driver as a module, choose M here: the module will be called snd-hdspm. -config SND_HIFIER - tristate "TempoTec HiFier Fantasia" - select SND_OXYGEN_LIB - help - Say Y here to include support for the MediaTek/TempoTec HiFier - Fantasia sound card. - - To compile this driver as a module, choose M here: the module - will be called snd-hifier. - config SND_ICE1712 tristate "ICEnsemble ICE1712 (Envy24)" select SND_MPU401_UART select SND_AC97_CODEC + select BITREVERSE + select ZONE_DMA help Say Y here to include support for soundcards based on the ICE1712 (Envy24) chip. @@ -566,7 +641,7 @@ config SND_ICE1724 AudioTrak Prodigy 192, 7.1 (HIFI/LT/XT), HD2; Hercules Fortissimo IV; ESI Juli@; Pontis MS300; EGO-SYS WaveTerminal 192M; Albatron K8X800 Pro II; Chaintech ZNF3-150/250, 9CJS, - AV-710; Shuttle SN25P. + AV-710; Shuttle SN25P; Philips PSC724 Ultimate Edge. To compile this driver as a module, choose M here: the module will be called snd-ice1724. @@ -602,9 +677,30 @@ config SND_KORG1212 To compile this driver as a module, choose M here: the module will be called snd-korg1212. +config SND_LOLA + tristate "Digigram Lola" + select SND_PCM + help + Say Y to include support for Digigram Lola boards. + + To compile this driver as a module, choose M here: the module + will be called snd-lola. + +config SND_LX6464ES + tristate "Digigram LX6464ES" + depends on HAS_IOPORT_MAP + select SND_PCM + help + Say Y here to include support for Digigram LX6464ES boards. + + To compile this driver as a module, choose M here: the module + will be called snd-lx6464es. + + config SND_MAESTRO3 tristate "ESS Allegro/Maestro3" select SND_AC97_CODEC + select ZONE_DMA help Say Y here to include support for soundcards based on ESS Maestro 3 (Allegro) chips. @@ -612,8 +708,19 @@ config SND_MAESTRO3 To compile this driver as a module, choose M here: the module will be called snd-maestro3. +config SND_MAESTRO3_INPUT + bool "Enable input device for maestro3 volume buttons" + depends on SND_MAESTRO3 + depends on INPUT=y || INPUT=SND_MAESTRO3 + help + If you say Y here, you will get an input device which reports + keypresses for the volume buttons connected to the maestro3 chip. + If you say N the buttons will directly control the master volume. + It is recommended to say Y. + config SND_MIXART tristate "Digigram miXart" + select FW_LOADER select SND_HWDEP select SND_PCM help @@ -634,6 +741,7 @@ config SND_NM256 config SND_PCXHR tristate "Digigram PCXHR" + select FW_LOADER select SND_PCM select SND_HWDEP help @@ -687,8 +795,9 @@ config SND_RME9652 config SND_SIS7019 tristate "SiS 7019 Audio Accelerator" - depends on X86 && !X86_64 + depends on X86_32 select SND_AC97_CODEC + select ZONE_DMA help Say Y here to include support for the SiS 7019 Audio Accelerator. @@ -700,6 +809,7 @@ config SND_SONICVIBES select SND_OPL3_LIB select SND_MPU401_UART select SND_AC97_CODEC + select ZONE_DMA help Say Y here to include support for soundcards based on the S3 SonicVibes chip. @@ -711,6 +821,7 @@ config SND_TRIDENT tristate "Trident 4D-Wave DX/NX; SiS 7018" select SND_MPU401_UART select SND_AC97_CODEC + select ZONE_DMA help Say Y here to include support for soundcards based on Trident 4D-Wave DX/NX or SiS 7018 chips. @@ -740,12 +851,17 @@ config SND_VIA82XX_MODEM will be called snd-via82xx-modem. config SND_VIRTUOSO - tristate "Asus Virtuoso 100/200 (Xonar)" + tristate "Asus Virtuoso 66/100/200 (Xonar)" select SND_OXYGEN_LIB + select SND_PCM + select SND_MPU401_UART + select SND_JACK if INPUT=y || INPUT=SND help Say Y here to include support for sound cards based on the - Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2 and D2X. - Support for the HDAV1.3 (Deluxe) is very experimental. + Asus AV66/AV100/AV200 chips, i.e., Xonar D1, DX, D2, D2X, DS, + Essence ST (Deluxe), and Essence STX. + Support for the HDAV1.3 (Deluxe) and HDAV1.3 Slim is experimental; + for the Xense, missing. To compile this driver as a module, choose M here: the module will be called snd-virtuoso. @@ -772,3 +888,5 @@ config SND_YMFPCI will be called snd-ymfpci. endif # SND_PCI + +source "sound/pci/hda/Kconfig" |