diff options
Diffstat (limited to 'sound/isa/sscape.c')
| -rw-r--r-- | sound/isa/sscape.c | 1394 |
1 files changed, 611 insertions, 783 deletions
diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c index 9f6b58c7920..44405df7d4b 100644 --- a/sound/isa/sscape.c +++ b/sound/isa/sscape.c @@ -1,5 +1,5 @@ /* - * Low-level ALSA driver for the ENSONIQ SoundScape PnP + * Low-level ALSA driver for the ENSONIQ SoundScape * Copyright (c) by Chris Rankin * * This driver was written in part using information obtained from @@ -21,32 +21,40 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <sound/driver.h> #include <linux/init.h> +#include <linux/err.h> +#include <linux/isa.h> #include <linux/delay.h> +#include <linux/firmware.h> #include <linux/pnp.h> #include <linux/spinlock.h> -#include <linux/moduleparam.h> +#include <linux/module.h> #include <asm/dma.h> #include <sound/core.h> -#include <sound/hwdep.h> -#include <sound/cs4231.h> +#include <sound/wss.h> #include <sound/mpu401.h> #include <sound/initval.h> -#include <sound/sscape_ioctl.h> - MODULE_AUTHOR("Chris Rankin"); -MODULE_DESCRIPTION("ENSONIQ SoundScape PnP driver"); +MODULE_DESCRIPTION("ENSONIQ SoundScape driver"); MODULE_LICENSE("GPL"); - -static int index[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_IDX; -static char* id[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_STR; -static long port[SNDRV_CARDS] __devinitdata = { [0 ... (SNDRV_CARDS-1)] = SNDRV_AUTO_PORT }; -static int irq[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_IRQ; -static int mpu_irq[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_IRQ; -static int dma[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_DMA; +MODULE_FIRMWARE("sndscape.co0"); +MODULE_FIRMWARE("sndscape.co1"); +MODULE_FIRMWARE("sndscape.co2"); +MODULE_FIRMWARE("sndscape.co3"); +MODULE_FIRMWARE("sndscape.co4"); +MODULE_FIRMWARE("scope.cod"); + +static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; +static char* id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; +static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; +static long wss_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; +static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; +static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; +static int dma[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; +static int dma2[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; +static bool joystick[SNDRV_CARDS]; module_param_array(index, int, NULL, 0444); MODULE_PARM_DESC(index, "Index number for SoundScape soundcard"); @@ -57,6 +65,9 @@ MODULE_PARM_DESC(id, "Description for SoundScape card"); module_param_array(port, long, NULL, 0444); MODULE_PARM_DESC(port, "Port # for SoundScape driver."); +module_param_array(wss_port, long, NULL, 0444); +MODULE_PARM_DESC(wss_port, "WSS Port # for SoundScape driver."); + module_param_array(irq, int, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for SoundScape driver."); @@ -65,22 +76,27 @@ MODULE_PARM_DESC(mpu_irq, "MPU401 IRQ # for SoundScape driver."); module_param_array(dma, int, NULL, 0444); MODULE_PARM_DESC(dma, "DMA # for SoundScape driver."); - + +module_param_array(dma2, int, NULL, 0444); +MODULE_PARM_DESC(dma2, "DMA2 # for SoundScape driver."); + +module_param_array(joystick, bool, NULL, 0444); +MODULE_PARM_DESC(joystick, "Enable gameport."); + #ifdef CONFIG_PNP +static int isa_registered; +static int pnp_registered; + static struct pnp_card_device_id sscape_pnpids[] = { - { .id = "ENS3081", .devs = { { "ENS0000" } } }, + { .id = "ENS3081", .devs = { { "ENS0000" } } }, /* Soundscape PnP */ + { .id = "ENS4081", .devs = { { "ENS1011" } } }, /* VIVO90 */ { .id = "" } /* end */ }; MODULE_DEVICE_TABLE(pnp_card, sscape_pnpids); #endif -static snd_card_t *sscape_card[SNDRV_CARDS]; - -#define MPU401_IO(i) ((i) + 0) -#define MIDI_DATA_IO(i) ((i) + 0) -#define MIDI_CTRL_IO(i) ((i) + 1) #define HOST_CTRL_IO(i) ((i) + 2) #define HOST_DATA_IO(i) ((i) + 3) #define ODIE_ADDR_IO(i) ((i) + 4) @@ -93,14 +109,14 @@ static snd_card_t *sscape_card[SNDRV_CARDS]; #define RX_READY 0x01 #define TX_READY 0x02 -#define CMD_ACK 0x80 -#define CMD_SET_MIDI_VOL 0x84 -#define CMD_GET_MIDI_VOL 0x85 -#define CMD_XXX_MIDI_VOL 0x86 -#define CMD_SET_EXTMIDI 0x8a -#define CMD_GET_EXTMIDI 0x8b -#define CMD_SET_MT32 0x8c -#define CMD_GET_MT32 0x8d +#define CMD_ACK 0x80 +#define CMD_SET_MIDI_VOL 0x84 +#define CMD_GET_MIDI_VOL 0x85 +#define CMD_XXX_MIDI_VOL 0x86 +#define CMD_SET_EXTMIDI 0x8a +#define CMD_GET_EXTMIDI 0x8b +#define CMD_SET_MT32 0x8c +#define CMD_GET_MT32 0x8d enum GA_REG { GA_INTSTAT_REG = 0, @@ -118,59 +134,48 @@ enum GA_REG { #define DMA_8BIT 0x80 -#define AD1845_FREQ_SEL_MSB 0x16 -#define AD1845_FREQ_SEL_LSB 0x17 +enum card_type { + MEDIA_FX, /* Sequoia S-1000 */ + SSCAPE, /* Sequoia S-2000 */ + SSCAPE_PNP, + SSCAPE_VIVO, +}; struct soundscape { spinlock_t lock; unsigned io_base; - int codec_type; int ic_type; + enum card_type type; struct resource *io_res; - cs4231_t *chip; - mpu401_t *mpu; - snd_hwdep_t *hw; + struct resource *wss_res; + struct snd_wss *chip; - /* - * The MIDI device won't work until we've loaded - * its firmware via a hardware-dependent device IOCTL - */ - spinlock_t fwlock; - int hw_in_use; - unsigned long midi_usage; unsigned char midi_vol; }; #define INVALID_IRQ ((unsigned)-1) -static inline struct soundscape *get_card_soundscape(snd_card_t * c) +static inline struct soundscape *get_card_soundscape(struct snd_card *c) { return (struct soundscape *) (c->private_data); } -static inline struct soundscape *get_mpu401_soundscape(mpu401_t * mpu) -{ - return (struct soundscape *) (mpu->private_data); -} - -static inline struct soundscape *get_hwdep_soundscape(snd_hwdep_t * hw) -{ - return (struct soundscape *) (hw->private_data); -} - - /* * Allocates some kernel memory that we can use for DMA. * I think this means that the memory has to map to * contiguous pages of physical memory. */ -static struct snd_dma_buffer *get_dmabuf(struct snd_dma_buffer *buf, unsigned long size) +static struct snd_dma_buffer *get_dmabuf(struct snd_dma_buffer *buf, + unsigned long size) { if (buf) { - if (snd_dma_alloc_pages_fallback(SNDRV_DMA_TYPE_DEV, snd_dma_isa_data(), + if (snd_dma_alloc_pages_fallback(SNDRV_DMA_TYPE_DEV, + snd_dma_isa_data(), size, buf) < 0) { - snd_printk(KERN_ERR "sscape: Failed to allocate %lu bytes for DMA\n", size); + snd_printk(KERN_ERR "sscape: Failed to allocate " + "%lu bytes for DMA\n", + size); return NULL; } } @@ -187,13 +192,13 @@ static void free_dmabuf(struct snd_dma_buffer *buf) snd_dma_free_pages(buf); } - /* * This function writes to the SoundScape's control registers, * but doesn't do any locking. It's up to the caller to do that. * This is why this function is "unsafe" ... */ -static inline void sscape_write_unsafe(unsigned io_base, enum GA_REG reg, unsigned char val) +static inline void sscape_write_unsafe(unsigned io_base, enum GA_REG reg, + unsigned char val) { outb(reg, ODIE_ADDR_IO(io_base)); outb(val, ODIE_DATA_IO(io_base)); @@ -203,7 +208,8 @@ static inline void sscape_write_unsafe(unsigned io_base, enum GA_REG reg, unsign * Write to the SoundScape's control registers, and do the * necessary locking ... */ -static void sscape_write(struct soundscape *s, enum GA_REG reg, unsigned char val) +static void sscape_write(struct soundscape *s, enum GA_REG reg, + unsigned char val) { unsigned long flags; @@ -216,7 +222,8 @@ static void sscape_write(struct soundscape *s, enum GA_REG reg, unsigned char va * Read from the SoundScape's control registers, but leave any * locking to the caller. This is why the function is "unsafe" ... */ -static inline unsigned char sscape_read_unsafe(unsigned io_base, enum GA_REG reg) +static inline unsigned char sscape_read_unsafe(unsigned io_base, + enum GA_REG reg) { outb(reg, ODIE_ADDR_IO(io_base)); return inb(ODIE_DATA_IO(io_base)); @@ -245,9 +252,8 @@ static inline void set_midi_mode_unsafe(unsigned io_base) static inline int host_read_unsafe(unsigned io_base) { int data = -1; - if ((inb(HOST_CTRL_IO(io_base)) & RX_READY) != 0) { + if ((inb(HOST_CTRL_IO(io_base)) & RX_READY) != 0) data = inb(HOST_DATA_IO(io_base)); - } return data; } @@ -289,7 +295,7 @@ static inline int host_write_unsafe(unsigned io_base, unsigned char data) * Also leaves all locking-issues to the caller ... */ static int host_write_ctrl_unsafe(unsigned io_base, unsigned char data, - unsigned timeout) + unsigned timeout) { int err; @@ -308,17 +314,17 @@ static int host_write_ctrl_unsafe(unsigned io_base, unsigned char data, * * NOTE: This check is based upon observation, not documentation. */ -static inline int verify_mpu401(const mpu401_t * mpu) +static inline int verify_mpu401(const struct snd_mpu401 *mpu) { - return ((inb(MIDI_CTRL_IO(mpu->port)) & 0xc0) == 0x80); + return ((inb(MPU401C(mpu)) & 0xc0) == 0x80); } /* * This is apparently the standard way to initailise an MPU-401 */ -static inline void initialise_mpu401(const mpu401_t * mpu) +static inline void initialise_mpu401(const struct snd_mpu401 *mpu) { - outb(0, MIDI_DATA_IO(mpu->port)); + outb(0, MPU401D(mpu)); } /* @@ -326,58 +332,49 @@ static inline void initialise_mpu401(const mpu401_t * mpu) * The AD1845 detection fails if we *don't* do this, so I * think that this is a good idea ... */ -static inline void activate_ad1845_unsafe(unsigned io_base) +static void activate_ad1845_unsafe(unsigned io_base) { - sscape_write_unsafe(io_base, GA_HMCTL_REG, (sscape_read_unsafe(io_base, GA_HMCTL_REG) & 0xcf) | 0x10); + unsigned char val = sscape_read_unsafe(io_base, GA_HMCTL_REG); + sscape_write_unsafe(io_base, GA_HMCTL_REG, (val & 0xcf) | 0x10); sscape_write_unsafe(io_base, GA_CDCFG_REG, 0x80); } /* * Do the necessary ALSA-level cleanup to deallocate our driver ... */ -static void soundscape_free(snd_card_t * c) +static void soundscape_free(struct snd_card *c) { - register struct soundscape *sscape = get_card_soundscape(c); - release_resource(sscape->io_res); - kfree_nocheck(sscape->io_res); + struct soundscape *sscape = get_card_soundscape(c); + release_and_free_resource(sscape->io_res); + release_and_free_resource(sscape->wss_res); free_dma(sscape->chip->dma1); } /* - * Put this process into an idle wait-state for a certain number - * of "jiffies". The process can almost certainly be rescheduled - * while we're waiting, and so we must NOT be holding any spinlocks - * when we call this function. If we are then we risk DEADLOCK in - * SMP (Ha!) or pre-emptible kernels. - */ -static inline void sleep(long jiffs, int state) -{ - set_current_state(state); - schedule_timeout(jiffs); -} - -/* * Tell the SoundScape to begin a DMA tranfer using the given channel. * All locking issues are left to the caller. */ -static inline void sscape_start_dma_unsafe(unsigned io_base, enum GA_REG reg) +static void sscape_start_dma_unsafe(unsigned io_base, enum GA_REG reg) { - sscape_write_unsafe(io_base, reg, sscape_read_unsafe(io_base, reg) | 0x01); - sscape_write_unsafe(io_base, reg, sscape_read_unsafe(io_base, reg) & 0xfe); + sscape_write_unsafe(io_base, reg, + sscape_read_unsafe(io_base, reg) | 0x01); + sscape_write_unsafe(io_base, reg, + sscape_read_unsafe(io_base, reg) & 0xfe); } /* * Wait for a DMA transfer to complete. This is a "limited busy-wait", * and all locking issues are left to the caller. */ -static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg, unsigned timeout) +static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg, + unsigned timeout) { while (!(sscape_read_unsafe(io_base, reg) & 0x01) && (timeout != 0)) { udelay(100); --timeout; } /* while */ - return (sscape_read_unsafe(io_base, reg) & 0x01); + return sscape_read_unsafe(io_base, reg) & 0x01; } /* @@ -389,20 +386,20 @@ static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg, unsigned ti */ static int obp_startup_ack(struct soundscape *s, unsigned timeout) { - while (timeout != 0) { - unsigned long flags; - unsigned char x; + unsigned long end_time = jiffies + msecs_to_jiffies(timeout); - sleep(1, TASK_INTERRUPTIBLE); + do { + unsigned long flags; + int x; spin_lock_irqsave(&s->lock, flags); - x = inb(HOST_DATA_IO(s->io_base)); + x = host_read_unsafe(s->io_base); spin_unlock_irqrestore(&s->lock, flags); - if ((x & 0xfe) == 0xfe) + if (x == 0xfe || x == 0xff) return 1; - --timeout; - } /* while */ + msleep(10); + } while (time_before(jiffies, end_time)); return 0; } @@ -416,20 +413,20 @@ static int obp_startup_ack(struct soundscape *s, unsigned timeout) */ static int host_startup_ack(struct soundscape *s, unsigned timeout) { - while (timeout != 0) { - unsigned long flags; - unsigned char x; + unsigned long end_time = jiffies + msecs_to_jiffies(timeout); - sleep(1, TASK_INTERRUPTIBLE); + do { + unsigned long flags; + int x; spin_lock_irqsave(&s->lock, flags); - x = inb(HOST_DATA_IO(s->io_base)); + x = host_read_unsafe(s->io_base); spin_unlock_irqrestore(&s->lock, flags); if (x == 0xfe) return 1; - --timeout; - } /* while */ + msleep(10); + } while (time_before(jiffies, end_time)); return 0; } @@ -437,15 +434,15 @@ static int host_startup_ack(struct soundscape *s, unsigned timeout) /* * Upload a byte-stream into the SoundScape using DMA channel A. */ -static int upload_dma_data(struct soundscape *s, - const unsigned char __user *data, - size_t size) +static int upload_dma_data(struct soundscape *s, const unsigned char *data, + size_t size) { unsigned long flags; struct snd_dma_buffer dma; int ret; + unsigned char val; - if (!get_dmabuf(&dma, PAGE_ALIGN(size))) + if (!get_dmabuf(&dma, PAGE_ALIGN(32 * 1024))) return -ENOMEM; spin_lock_irqsave(&s->lock, flags); @@ -453,70 +450,57 @@ static int upload_dma_data(struct soundscape *s, /* * Reset the board ... */ - sscape_write_unsafe(s->io_base, GA_HMCTL_REG, sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f); + val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG); + sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val & 0x3f); /* * Enable the DMA channels and configure them ... */ - sscape_write_unsafe(s->io_base, GA_DMACFG_REG, 0x50); - sscape_write_unsafe(s->io_base, GA_DMAA_REG, (s->chip->dma1 << 4) | DMA_8BIT); + val = (s->chip->dma1 << 4) | DMA_8BIT; + sscape_write_unsafe(s->io_base, GA_DMAA_REG, val); sscape_write_unsafe(s->io_base, GA_DMAB_REG, 0x20); /* * Take the board out of reset ... */ - sscape_write_unsafe(s->io_base, GA_HMCTL_REG, sscape_read_unsafe(s->io_base, GA_HMCTL_REG) | 0x80); + val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG); + sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val | 0x80); /* - * Upload the user's data (firmware?) to the SoundScape + * Upload the firmware to the SoundScape * board through the DMA channel ... */ while (size != 0) { unsigned long len; - /* - * Apparently, copying to/from userspace can sleep. - * We are therefore forbidden from holding any - * spinlocks while we copy ... - */ - spin_unlock_irqrestore(&s->lock, flags); - - /* - * Remember that the data that we want to DMA - * comes from USERSPACE. We have already verified - * the userspace pointer ... - */ len = min(size, dma.bytes); - len -= __copy_from_user(dma.area, data, len); + memcpy(dma.area, data, len); data += len; size -= len; - /* - * Grab that spinlock again, now that we've - * finished copying! - */ - spin_lock_irqsave(&s->lock, flags); - snd_dma_program(s->chip->dma1, dma.addr, len, DMA_MODE_WRITE); sscape_start_dma_unsafe(s->io_base, GA_DMAA_REG); if (!sscape_wait_dma_unsafe(s->io_base, GA_DMAA_REG, 5000)) { /* - * Don't forget to release this spinlock we're holding ... + * Don't forget to release this spinlock we're holding */ spin_unlock_irqrestore(&s->lock, flags); - snd_printk(KERN_ERR "sscape: DMA upload has timed out\n"); + snd_printk(KERN_ERR + "sscape: DMA upload has timed out\n"); ret = -EAGAIN; goto _release_dma; } } /* while */ set_host_mode_unsafe(s->io_base); + outb(0x0, s->io_base); /* * Boot the board ... (I think) */ - sscape_write_unsafe(s->io_base, GA_HMCTL_REG, sscape_read_unsafe(s->io_base, GA_HMCTL_REG) | 0x40); + val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG); + sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val | 0x40); spin_unlock_irqrestore(&s->lock, flags); /* @@ -525,19 +509,21 @@ static int upload_dma_data(struct soundscape *s, * give it 5 seconds (max) ... */ ret = 0; - if (!obp_startup_ack(s, 5)) { - snd_printk(KERN_ERR "sscape: No response from on-board processor after upload\n"); + if (!obp_startup_ack(s, 5000)) { + snd_printk(KERN_ERR "sscape: No response " + "from on-board processor after upload\n"); ret = -EAGAIN; - } else if (!host_startup_ack(s, 5)) { - snd_printk(KERN_ERR "sscape: SoundScape failed to initialise\n"); + } else if (!host_startup_ack(s, 5000)) { + snd_printk(KERN_ERR + "sscape: SoundScape failed to initialise\n"); ret = -EAGAIN; } - _release_dma: +_release_dma: /* * NOTE!!! We are NOT holding any spinlocks at this point !!! */ - sscape_write(s, GA_DMAA_REG, (s->ic_type == IC_ODIE ? 0x70 : 0x40)); + sscape_write(s, GA_DMAA_REG, (s->ic_type == IC_OPUS ? 0x40 : 0x70)); free_dmabuf(&dma); return ret; @@ -547,167 +533,76 @@ static int upload_dma_data(struct soundscape *s, * Upload the bootblock(?) into the SoundScape. The only * purpose of this block of code seems to be to tell * us which version of the microcode we should be using. - * - * NOTE: The boot-block data resides in USER-SPACE!!! - * However, we have already verified its memory - * addresses by the time we get here. */ -static int sscape_upload_bootblock(struct soundscape *sscape, struct sscape_bootblock __user *bb) +static int sscape_upload_bootblock(struct snd_card *card) { + struct soundscape *sscape = get_card_soundscape(card); unsigned long flags; + const struct firmware *init_fw = NULL; int data = 0; int ret; - ret = upload_dma_data(sscape, bb->code, sizeof(bb->code)); - - spin_lock_irqsave(&sscape->lock, flags); - if (ret == 0) { - data = host_read_ctrl_unsafe(sscape->io_base, 100); - } - set_midi_mode_unsafe(sscape->io_base); - spin_unlock_irqrestore(&sscape->lock, flags); - - if (ret == 0) { - if (data < 0) { - snd_printk(KERN_ERR "sscape: timeout reading firmware version\n"); - ret = -EAGAIN; - } - else if (__copy_to_user(&bb->version, &data, sizeof(bb->version))) { - ret = -EFAULT; - } + ret = request_firmware(&init_fw, "scope.cod", card->dev); + if (ret < 0) { + snd_printk(KERN_ERR "sscape: Error loading scope.cod"); + return ret; } + ret = upload_dma_data(sscape, init_fw->data, init_fw->size); - return ret; -} + release_firmware(init_fw); -/* - * Upload the microcode into the SoundScape. The - * microcode is 64K of data, and if we try to copy - * it into a local variable then we will SMASH THE - * KERNEL'S STACK! We therefore leave it in USER - * SPACE, and save ourselves from copying it at all. - */ -static int sscape_upload_microcode(struct soundscape *sscape, - const struct sscape_microcode __user *mc) -{ - unsigned long flags; - char __user *code; - int err; - - /* - * We are going to have to copy this data into a special - * DMA-able buffer before we can upload it. We shall therefore - * just check that the data pointer is valid for now. - * - * NOTE: This buffer is 64K long! That's WAY too big to - * copy into a stack-temporary anyway. - */ - if ( get_user(code, &mc->code) || - !access_ok(VERIFY_READ, code, SSCAPE_MICROCODE_SIZE) ) - return -EFAULT; + spin_lock_irqsave(&sscape->lock, flags); + if (ret == 0) + data = host_read_ctrl_unsafe(sscape->io_base, 100); - if ((err = upload_dma_data(sscape, code, SSCAPE_MICROCODE_SIZE)) == 0) { - snd_printk(KERN_INFO "sscape: MIDI firmware loaded\n"); - } + if (data & 0x10) + sscape_write_unsafe(sscape->io_base, GA_SMCFGA_REG, 0x2f); - spin_lock_irqsave(&sscape->lock, flags); - set_midi_mode_unsafe(sscape->io_base); spin_unlock_irqrestore(&sscape->lock, flags); - initialise_mpu401(sscape->mpu); + data &= 0xf; + if (ret == 0 && data > 7) { + snd_printk(KERN_ERR + "sscape: timeout reading firmware version\n"); + ret = -EAGAIN; + } - return err; + return (ret == 0) ? data : ret; } /* - * Hardware-specific device functions, to implement special - * IOCTLs for the SoundScape card. This is how we upload - * the microcode into the card, for example, and so we - * must ensure that no two processes can open this device - * simultaneously, and that we can't open it at all if - * someone is using the MIDI device. + * Upload the microcode into the SoundScape. */ -static int sscape_hw_open(snd_hwdep_t * hw, struct file *file) +static int sscape_upload_microcode(struct snd_card *card, int version) { - register struct soundscape *sscape = get_hwdep_soundscape(hw); - unsigned long flags; + struct soundscape *sscape = get_card_soundscape(card); + const struct firmware *init_fw = NULL; + char name[14]; int err; - spin_lock_irqsave(&sscape->fwlock, flags); + snprintf(name, sizeof(name), "sndscape.co%d", version); - if ((sscape->midi_usage != 0) || sscape->hw_in_use) { - err = -EBUSY; - } else { - sscape->hw_in_use = 1; - err = 0; + err = request_firmware(&init_fw, name, card->dev); + if (err < 0) { + snd_printk(KERN_ERR "sscape: Error loading sndscape.co%d", + version); + return err; } + err = upload_dma_data(sscape, init_fw->data, init_fw->size); + if (err == 0) + snd_printk(KERN_INFO "sscape: MIDI firmware loaded %d KBs\n", + init_fw->size >> 10); - spin_unlock_irqrestore(&sscape->fwlock, flags); - return err; -} - -static int sscape_hw_release(snd_hwdep_t * hw, struct file *file) -{ - register struct soundscape *sscape = get_hwdep_soundscape(hw); - unsigned long flags; - - spin_lock_irqsave(&sscape->fwlock, flags); - sscape->hw_in_use = 0; - spin_unlock_irqrestore(&sscape->fwlock, flags); - return 0; -} - -static int sscape_hw_ioctl(snd_hwdep_t * hw, struct file *file, - unsigned int cmd, unsigned long arg) -{ - struct soundscape *sscape = get_hwdep_soundscape(hw); - int err = -EBUSY; - - switch (cmd) { - case SND_SSCAPE_LOAD_BOOTB: - { - register struct sscape_bootblock __user *bb = (struct sscape_bootblock __user *) arg; - - /* - * We are going to have to copy this data into a special - * DMA-able buffer before we can upload it. We shall therefore - * just check that the data pointer is valid for now ... - */ - if ( !access_ok(VERIFY_READ, bb->code, sizeof(bb->code)) ) - return -EFAULT; - - /* - * Now check that we can write the firmware version number too... - */ - if ( !access_ok(VERIFY_WRITE, &bb->version, sizeof(bb->version)) ) - return -EFAULT; - - err = sscape_upload_bootblock(sscape, bb); - } - break; - - case SND_SSCAPE_LOAD_MCODE: - { - register const struct sscape_microcode __user *mc = (const struct sscape_microcode __user *) arg; - - err = sscape_upload_microcode(sscape, mc); - } - break; - - default: - err = -EINVAL; - break; - } /* switch */ + release_firmware(init_fw); return err; } - /* * Mixer control for the SoundScape's MIDI device. */ -static int sscape_midi_info(snd_kcontrol_t * ctl, - snd_ctl_elem_info_t * uinfo) +static int sscape_midi_info(struct snd_kcontrol *ctl, + struct snd_ctl_elem_info *uinfo) { uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; uinfo->count = 1; @@ -716,37 +611,33 @@ static int sscape_midi_info(snd_kcontrol_t * ctl, return 0; } -static int sscape_midi_get(snd_kcontrol_t * kctl, - snd_ctl_elem_value_t * uctl) +static int sscape_midi_get(struct snd_kcontrol *kctl, + struct snd_ctl_elem_value *uctl) { - cs4231_t *chip = snd_kcontrol_chip(kctl); - snd_card_t *card = chip->card; + struct snd_wss *chip = snd_kcontrol_chip(kctl); + struct snd_card *card = chip->card; register struct soundscape *s = get_card_soundscape(card); unsigned long flags; spin_lock_irqsave(&s->lock, flags); - set_host_mode_unsafe(s->io_base); - - if (host_write_ctrl_unsafe(s->io_base, CMD_GET_MIDI_VOL, 100)) { - uctl->value.integer.value[0] = host_read_ctrl_unsafe(s->io_base, 100); - } - - set_midi_mode_unsafe(s->io_base); + uctl->value.integer.value[0] = s->midi_vol; spin_unlock_irqrestore(&s->lock, flags); return 0; } -static int sscape_midi_put(snd_kcontrol_t * kctl, - snd_ctl_elem_value_t * uctl) +static int sscape_midi_put(struct snd_kcontrol *kctl, + struct snd_ctl_elem_value *uctl) { - cs4231_t *chip = snd_kcontrol_chip(kctl); - snd_card_t *card = chip->card; - register struct soundscape *s = get_card_soundscape(card); + struct snd_wss *chip = snd_kcontrol_chip(kctl); + struct snd_card *card = chip->card; + struct soundscape *s = get_card_soundscape(card); unsigned long flags; int change; + unsigned char new_val; spin_lock_irqsave(&s->lock, flags); + new_val = uctl->value.integer.value[0] & 127; /* * We need to put the board into HOST mode before we * can send any volume-changing HOST commands ... @@ -759,14 +650,16 @@ static int sscape_midi_put(snd_kcontrol_t * kctl, * and then perform another volume-related command. Perhaps the * first command is an "open" and the second command is a "close"? */ - if (s->midi_vol == ((unsigned char) uctl->value.integer. value[0] & 127)) { + if (s->midi_vol == new_val) { change = 0; goto __skip_change; } - change = (host_write_ctrl_unsafe(s->io_base, CMD_SET_MIDI_VOL, 100) - && host_write_ctrl_unsafe(s->io_base, ((unsigned char) uctl->value.integer. value[0]) & 127, 100) - && host_write_ctrl_unsafe(s->io_base, CMD_XXX_MIDI_VOL, 100)); - __skip_change: + change = host_write_ctrl_unsafe(s->io_base, CMD_SET_MIDI_VOL, 100) + && host_write_ctrl_unsafe(s->io_base, new_val, 100) + && host_write_ctrl_unsafe(s->io_base, CMD_XXX_MIDI_VOL, 100) + && host_write_ctrl_unsafe(s->io_base, new_val, 100); + s->midi_vol = new_val; +__skip_change: /* * Take the board out of HOST mode and back into MIDI mode ... @@ -777,7 +670,7 @@ static int sscape_midi_put(snd_kcontrol_t * kctl, return change; } -static snd_kcontrol_new_t midi_mixer_ctl = { +static struct snd_kcontrol_new midi_mixer_ctl = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "MIDI", .info = sscape_midi_info, @@ -790,25 +683,30 @@ static snd_kcontrol_new_t midi_mixer_ctl = { * These IRQs are encoded as bit patterns so that they can be * written to the control registers. */ -static unsigned __devinit get_irq_config(int irq) +static unsigned get_irq_config(int sscape_type, int irq) { static const int valid_irq[] = { 9, 5, 7, 10 }; + static const int old_irq[] = { 9, 7, 5, 15 }; unsigned cfg; - for (cfg = 0; cfg < ARRAY_SIZE(valid_irq); ++cfg) { - if (irq == valid_irq[cfg]) - return cfg; - } /* for */ + if (sscape_type == MEDIA_FX) { + for (cfg = 0; cfg < ARRAY_SIZE(old_irq); ++cfg) + if (irq == old_irq[cfg]) + return cfg; + } else { + for (cfg = 0; cfg < ARRAY_SIZE(valid_irq); ++cfg) + if (irq == valid_irq[cfg]) + return cfg; + } return INVALID_IRQ; } - /* * Perform certain arcane port-checks to see whether there * is a SoundScape board lurking behind the given ports. */ -static int __devinit detect_sscape(struct soundscape *s) +static int detect_sscape(struct soundscape *s, long wss_io) { unsigned long flags; unsigned d; @@ -828,13 +726,11 @@ static int __devinit detect_sscape(struct soundscape *s) if ((d & 0x80) != 0) goto _done; - if (d == 0) { - s->codec_type = 1; + if (d == 0) s->ic_type = IC_ODIE; - } else if ((d & 0x60) != 0) { - s->codec_type = 2; + else if ((d & 0x60) != 0) s->ic_type = IC_OPUS; - } else + else goto _done; outb(0xfa, ODIE_ADDR_IO(s->io_base)); @@ -844,15 +740,59 @@ static int __devinit detect_sscape(struct soundscape *s) outb(0xfe, ODIE_ADDR_IO(s->io_base)); if ((inb(ODIE_ADDR_IO(s->io_base)) & 0x9f) != 0x0e) goto _done; - if ((inb(ODIE_DATA_IO(s->io_base)) & 0x9f) != 0x0e) + + outb(0xfe, ODIE_ADDR_IO(s->io_base)); + d = inb(ODIE_DATA_IO(s->io_base)); + if (s->type != SSCAPE_VIVO && (d & 0x9f) != 0x0e) goto _done; + if (s->ic_type == IC_OPUS) + activate_ad1845_unsafe(s->io_base); + + if (s->type == SSCAPE_VIVO) + wss_io += 4; + + d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG); + sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0); + + /* wait for WSS codec */ + for (d = 0; d < 500; d++) { + if ((inb(wss_io) & 0x80) == 0) + break; + spin_unlock_irqrestore(&s->lock, flags); + msleep(1); + spin_lock_irqsave(&s->lock, flags); + } + + if ((inb(wss_io) & 0x80) != 0) + goto _done; + + if (inb(wss_io + 2) == 0xff) + goto _done; + + d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f; + sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d); + + if ((inb(wss_io) & 0x80) != 0) + s->type = MEDIA_FX; + + d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG); + sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0); + /* wait for WSS codec */ + for (d = 0; d < 500; d++) { + if ((inb(wss_io) & 0x80) == 0) + break; + spin_unlock_irqrestore(&s->lock, flags); + msleep(1); + spin_lock_irqsave(&s->lock, flags); + } + /* * SoundScape successfully detected! */ retval = 1; - _done: +_done: spin_unlock_irqrestore(&s->lock, flags); return retval; } @@ -863,64 +803,34 @@ static int __devinit detect_sscape(struct soundscape *s) * to crash the machine. Also check that someone isn't using the hardware * IOCTL device. */ -static int mpu401_open(mpu401_t * mpu) +static int mpu401_open(struct snd_mpu401 *mpu) { - int err; - if (!verify_mpu401(mpu)) { - snd_printk(KERN_ERR "sscape: MIDI disabled, please load firmware\n"); - err = -ENODEV; - } else { - register struct soundscape *sscape = get_mpu401_soundscape(mpu); - unsigned long flags; - - spin_lock_irqsave(&sscape->fwlock, flags); - - if (sscape->hw_in_use || (sscape->midi_usage == ULONG_MAX)) { - err = -EBUSY; - } else { - ++(sscape->midi_usage); - err = 0; - } - - spin_unlock_irqrestore(&sscape->fwlock, flags); + snd_printk(KERN_ERR "sscape: MIDI disabled, " + "please load firmware\n"); + return -ENODEV; } - return err; -} - -static void mpu401_close(mpu401_t * mpu) -{ - register struct soundscape *sscape = get_mpu401_soundscape(mpu); - unsigned long flags; - - spin_lock_irqsave(&sscape->fwlock, flags); - --(sscape->midi_usage); - spin_unlock_irqrestore(&sscape->fwlock, flags); + return 0; } /* * Initialse an MPU-401 subdevice for MIDI support on the SoundScape. */ -static int __devinit create_mpu401(snd_card_t * card, int devnum, unsigned long port, int irq) +static int create_mpu401(struct snd_card *card, int devnum, + unsigned long port, int irq) { struct soundscape *sscape = get_card_soundscape(card); - snd_rawmidi_t *rawmidi; + struct snd_rawmidi *rawmidi; int err; -#define MPU401_SHARE_HARDWARE 1 - if ((err = snd_mpu401_uart_new(card, devnum, - MPU401_HW_MPU401, - port, MPU401_SHARE_HARDWARE, - irq, SA_INTERRUPT, - &rawmidi)) == 0) { - mpu401_t *mpu = (mpu401_t *) rawmidi->private_data; + err = snd_mpu401_uart_new(card, devnum, MPU401_HW_MPU401, port, + MPU401_INFO_INTEGRATED, irq, &rawmidi); + if (err == 0) { + struct snd_mpu401 *mpu = rawmidi->private_data; mpu->open_input = mpu401_open; mpu->open_output = mpu401_open; - mpu->close_input = mpu401_close; - mpu->close_output = mpu401_close; mpu->private_data = sscape; - sscape->mpu = mpu; initialise_mpu401(mpu); } @@ -930,289 +840,195 @@ static int __devinit create_mpu401(snd_card_t * card, int devnum, unsigned long /* - * Override for the CS4231 playback format function. - * The AD1845 has much simpler format and rate selection. - */ -static void ad1845_playback_format(cs4231_t * chip, snd_pcm_hw_params_t * params, unsigned char format) -{ - unsigned long flags; - unsigned rate = params_rate(params); - - /* - * The AD1845 can't handle sample frequencies - * outside of 4 kHZ to 50 kHZ - */ - if (rate > 50000) - rate = 50000; - else if (rate < 4000) - rate = 4000; - - spin_lock_irqsave(&chip->reg_lock, flags); - - /* - * Program the AD1845 correctly for the playback stream. - * Note that we do NOT need to toggle the MCE bit because - * the PLAYBACK_ENABLE bit of the Interface Configuration - * register is set. - * - * NOTE: We seem to need to write to the MSB before the LSB - * to get the correct sample frequency. - */ - snd_cs4231_out(chip, CS4231_PLAYBK_FORMAT, (format & 0xf0)); - snd_cs4231_out(chip, AD1845_FREQ_SEL_MSB, (unsigned char) (rate >> 8)); - snd_cs4231_out(chip, AD1845_FREQ_SEL_LSB, (unsigned char) rate); - - spin_unlock_irqrestore(&chip->reg_lock, flags); -} - -/* - * Override for the CS4231 capture format function. - * The AD1845 has much simpler format and rate selection. - */ -static void ad1845_capture_format(cs4231_t * chip, snd_pcm_hw_params_t * params, unsigned char format) -{ - unsigned long flags; - unsigned rate = params_rate(params); - - /* - * The AD1845 can't handle sample frequencies - * outside of 4 kHZ to 50 kHZ - */ - if (rate > 50000) - rate = 50000; - else if (rate < 4000) - rate = 4000; - - spin_lock_irqsave(&chip->reg_lock, flags); - - /* - * Program the AD1845 correctly for the playback stream. - * Note that we do NOT need to toggle the MCE bit because - * the CAPTURE_ENABLE bit of the Interface Configuration - * register is set. - * - * NOTE: We seem to need to write to the MSB before the LSB - * to get the correct sample frequency. - */ - snd_cs4231_out(chip, CS4231_REC_FORMAT, (format & 0xf0)); - snd_cs4231_out(chip, AD1845_FREQ_SEL_MSB, (unsigned char) (rate >> 8)); - snd_cs4231_out(chip, AD1845_FREQ_SEL_LSB, (unsigned char) rate); - - spin_unlock_irqrestore(&chip->reg_lock, flags); -} - -/* * Create an AD1845 PCM subdevice on the SoundScape. The AD1845 * is very much like a CS4231, with a few extra bits. We will * try to support at least some of the extra bits by overriding * some of the CS4231 callback. */ -static int __devinit create_ad1845(snd_card_t * card, unsigned port, int irq, int dma1) +static int create_ad1845(struct snd_card *card, unsigned port, + int irq, int dma1, int dma2) { register struct soundscape *sscape = get_card_soundscape(card); - cs4231_t *chip; + struct snd_wss *chip; int err; + int codec_type = WSS_HW_DETECT; -#define CS4231_SHARE_HARDWARE (CS4231_HWSHARE_DMA1 | CS4231_HWSHARE_DMA2) - /* - * The AD1845 PCM device is only half-duplex, and so - * we only give it one DMA channel ... - */ - if ((err = snd_cs4231_create(card, - port, -1, irq, dma1, dma1, - CS4231_HW_DETECT, - CS4231_HWSHARE_DMA1, &chip)) == 0) { - unsigned long flags; - snd_pcm_t *pcm; - -#define AD1845_FREQ_SEL_ENABLE 0x08 + switch (sscape->type) { + case MEDIA_FX: + case SSCAPE: + /* + * There are some freak examples of early Soundscape cards + * with CS4231 instead of AD1848/CS4248. Unfortunately, the + * CS4231 works only in CS4248 compatibility mode on + * these cards so force it. + */ + if (sscape->ic_type != IC_OPUS) + codec_type = WSS_HW_AD1848; + break; -#define AD1845_PWR_DOWN_CTRL 0x1b -#define AD1845_CRYS_CLOCK_SEL 0x1d + case SSCAPE_VIVO: + port += 4; + break; + default: + break; + } -/* - * It turns out that the PLAYBACK_ENABLE bit is set - * by the lowlevel driver ... - * -#define AD1845_IFACE_CONFIG \ - (CS4231_AUTOCALIB | CS4231_RECORD_ENABLE | CS4231_PLAYBACK_ENABLE) - snd_cs4231_mce_up(chip); - spin_lock_irqsave(&chip->reg_lock, flags); - snd_cs4231_out(chip, CS4231_IFACE_CTRL, AD1845_IFACE_CONFIG); - spin_unlock_irqrestore(&chip->reg_lock, flags); - snd_cs4231_mce_down(chip); - */ + err = snd_wss_create(card, port, -1, irq, dma1, dma2, + codec_type, WSS_HWSHARE_DMA1, &chip); + if (!err) { + unsigned long flags; + struct snd_pcm *pcm; - /* - * The input clock frequency on the SoundScape must - * be 14.31818 MHz, because we must set this register - * to get the playback to sound correct ... - */ - snd_cs4231_mce_up(chip); - spin_lock_irqsave(&chip->reg_lock, flags); - snd_cs4231_out(chip, AD1845_CRYS_CLOCK_SEL, 0x20); - spin_unlock_irqrestore(&chip->reg_lock, flags); - snd_cs4231_mce_down(chip); + if (sscape->type != SSCAPE_VIVO) { + /* + * The input clock frequency on the SoundScape must + * be 14.31818 MHz, because we must set this register + * to get the playback to sound correct ... + */ + snd_wss_mce_up(chip); + spin_lock_irqsave(&chip->reg_lock, flags); + snd_wss_out(chip, AD1845_CLOCK, 0x20); + spin_unlock_irqrestore(&chip->reg_lock, flags); + snd_wss_mce_down(chip); - /* - * More custom configuration: - * a) select "mode 2", and provide a current drive of 8 mA - * b) enable frequency selection (for capture/playback) - */ - spin_lock_irqsave(&chip->reg_lock, flags); - snd_cs4231_out(chip, CS4231_MISC_INFO, (CS4231_MODE2 | 0x10)); - snd_cs4231_out(chip, AD1845_PWR_DOWN_CTRL, snd_cs4231_in(chip, AD1845_PWR_DOWN_CTRL) | AD1845_FREQ_SEL_ENABLE); - spin_unlock_irqrestore(&chip->reg_lock, flags); + } - if ((err = snd_cs4231_pcm(chip, 0, &pcm)) < 0) { - snd_printk(KERN_ERR "sscape: No PCM device for AD1845 chip\n"); + err = snd_wss_pcm(chip, 0, &pcm); + if (err < 0) { + snd_printk(KERN_ERR "sscape: No PCM device " + "for AD1845 chip\n"); goto _error; } - if ((err = snd_cs4231_mixer(chip)) < 0) { - snd_printk(KERN_ERR "sscape: No mixer device for AD1845 chip\n"); + err = snd_wss_mixer(chip); + if (err < 0) { + snd_printk(KERN_ERR "sscape: No mixer device " + "for AD1845 chip\n"); goto _error; } + if (chip->hardware != WSS_HW_AD1848) { + err = snd_wss_timer(chip, 0, NULL); + if (err < 0) { + snd_printk(KERN_ERR "sscape: No timer device " + "for AD1845 chip\n"); + goto _error; + } + } - if ((err = snd_ctl_add(card, snd_ctl_new1(&midi_mixer_ctl, chip))) < 0) { - snd_printk(KERN_ERR "sscape: Could not create MIDI mixer control\n"); - goto _error; + if (sscape->type != SSCAPE_VIVO) { + err = snd_ctl_add(card, + snd_ctl_new1(&midi_mixer_ctl, chip)); + if (err < 0) { + snd_printk(KERN_ERR "sscape: Could not create " + "MIDI mixer control\n"); + goto _error; + } } - strcpy(card->driver, "SoundScape"); - strcpy(card->shortname, pcm->name); - snprintf(card->longname, sizeof(card->longname), - "%s at 0x%lx, IRQ %d, DMA %d\n", - pcm->name, chip->port, chip->irq, chip->dma1); - chip->set_playback_format = ad1845_playback_format; - chip->set_capture_format = ad1845_capture_format; sscape->chip = chip; } - _error: +_error: return err; } -struct params -{ - int index; - const char *id; - unsigned port; - int irq; - int mpu_irq; - int dma1; -}; - - -static inline struct params* -init_params(struct params *params, - int index, - const char *id, - unsigned port, - int irq, - int mpu_irq, - int dma1) -{ - params->index = index; - params->id = id; - params->port = port; - params->irq = irq; - params->mpu_irq = mpu_irq; - params->dma1 = (dma1 & 0x03); - - return params; -} - - /* * Create an ALSA soundcard entry for the SoundScape, using * the given list of port, IRQ and DMA resources. */ -static int __devinit create_sscape(const struct params *params, snd_card_t **rcardp) +static int create_sscape(int dev, struct snd_card *card) { - snd_card_t *card; - register struct soundscape *sscape; - register unsigned dma_cfg; + struct soundscape *sscape = get_card_soundscape(card); + unsigned dma_cfg; unsigned irq_cfg; unsigned mpu_irq_cfg; struct resource *io_res; + struct resource *wss_res; unsigned long flags; int err; - - /* - * Check that the user didn't pass us garbage data ... - */ - irq_cfg = get_irq_config(params->irq); - if (irq_cfg == INVALID_IRQ) { - snd_printk(KERN_ERR "sscape: Invalid IRQ %d\n", params->irq); - return -ENXIO; - } - - mpu_irq_cfg = get_irq_config(params->mpu_irq); - if (mpu_irq_cfg == INVALID_IRQ) { - printk(KERN_ERR "sscape: Invalid IRQ %d\n", params->mpu_irq); - return -ENXIO; - } + int val; + const char *name; /* * Grab IO ports that we will need to probe so that we * can detect and control this hardware ... */ - if ((io_res = request_region(params->port, 8, "SoundScape")) == NULL) { - snd_printk(KERN_ERR "sscape: can't grab port 0x%x\n", params->port); + io_res = request_region(port[dev], 8, "SoundScape"); + if (!io_res) { + snd_printk(KERN_ERR + "sscape: can't grab port 0x%lx\n", port[dev]); return -EBUSY; } - - /* - * Grab both DMA channels (OK, only one for now) ... - */ - if ((err = request_dma(params->dma1, "SoundScape")) < 0) { - snd_printk(KERN_ERR "sscape: can't grab DMA %d\n", params->dma1); - goto _release_region; + wss_res = NULL; + if (sscape->type == SSCAPE_VIVO) { + wss_res = request_region(wss_port[dev], 4, "SoundScape"); + if (!wss_res) { + snd_printk(KERN_ERR "sscape: can't grab port 0x%lx\n", + wss_port[dev]); + err = -EBUSY; + goto _release_region; + } } /* - * Create a new ALSA sound card entry, in anticipation - * of detecting our hardware ... + * Grab one DMA channel ... */ - if ((card = snd_card_new(params->index, params->id, THIS_MODULE, sizeof(struct soundscape))) == NULL) { - err = -ENOMEM; - goto _release_dma; + err = request_dma(dma[dev], "SoundScape"); + if (err < 0) { + snd_printk(KERN_ERR "sscape: can't grab DMA %d\n", dma[dev]); + goto _release_region; } - sscape = get_card_soundscape(card); spin_lock_init(&sscape->lock); - spin_lock_init(&sscape->fwlock); sscape->io_res = io_res; - sscape->io_base = params->port; + sscape->wss_res = wss_res; + sscape->io_base = port[dev]; - if (!detect_sscape(sscape)) { - printk(KERN_ERR "sscape: hardware not detected at 0x%x\n", sscape->io_base); + if (!detect_sscape(sscape, wss_port[dev])) { + printk(KERN_ERR "sscape: hardware not detected at 0x%x\n", + sscape->io_base); err = -ENODEV; - goto _release_card; + goto _release_dma; + } + + switch (sscape->type) { + case MEDIA_FX: + name = "MediaFX/SoundFX"; + break; + case SSCAPE: + name = "Soundscape"; + break; + case SSCAPE_PNP: + name = "Soundscape PnP"; + break; + case SSCAPE_VIVO: + name = "Soundscape VIVO"; + break; + default: + name = "unknown Soundscape"; + break; } - printk(KERN_INFO "sscape: hardware detected at 0x%x, using IRQ %d, DMA %d\n", - sscape->io_base, params->irq, params->dma1); + printk(KERN_INFO "sscape: %s card detected at 0x%x, using IRQ %d, DMA %d\n", + name, sscape->io_base, irq[dev], dma[dev]); /* - * Now create the hardware-specific device so that we can - * load the microcode into the on-board processor. - * We cannot use the MPU-401 MIDI system until this firmware - * has been loaded into the card. + * Check that the user didn't pass us garbage data ... */ - if ((err = snd_hwdep_new(card, "MC68EC000", 0, &(sscape->hw))) < 0) { - printk(KERN_ERR "sscape: Failed to create firmware device\n"); - goto _release_card; + irq_cfg = get_irq_config(sscape->type, irq[dev]); + if (irq_cfg == INVALID_IRQ) { + snd_printk(KERN_ERR "sscape: Invalid IRQ %d\n", irq[dev]); + err = -ENXIO; + goto _release_dma; + } + + mpu_irq_cfg = get_irq_config(sscape->type, mpu_irq[dev]); + if (mpu_irq_cfg == INVALID_IRQ) { + snd_printk(KERN_ERR "sscape: Invalid IRQ %d\n", mpu_irq[dev]); + err = -ENXIO; + goto _release_dma; } - strlcpy(sscape->hw->name, "SoundScape M68K", sizeof(sscape->hw->name)); - sscape->hw->name[sizeof(sscape->hw->name) - 1] = '\0'; - sscape->hw->iface = SNDRV_HWDEP_IFACE_SSCAPE; - sscape->hw->ops.open = sscape_hw_open; - sscape->hw->ops.release = sscape_hw_release; - sscape->hw->ops.ioctl = sscape_hw_ioctl; - sscape->hw->private_data = sscape; /* * Tell the on-board devices where their resources are (I think - @@ -1220,9 +1036,6 @@ static int __devinit create_sscape(const struct params *params, snd_card_t **rca */ spin_lock_irqsave(&sscape->lock, flags); - activate_ad1845_unsafe(sscape->io_base); - - sscape_write_unsafe(sscape->io_base, GA_INTENA_REG, 0x00); /* disable */ sscape_write_unsafe(sscape->io_base, GA_SMCFGA_REG, 0x2e); sscape_write_unsafe(sscape->io_base, GA_SMCFGB_REG, 0x00); @@ -1230,14 +1043,23 @@ static int __devinit create_sscape(const struct params *params, snd_card_t **rca * Enable and configure the DMA channels ... */ sscape_write_unsafe(sscape->io_base, GA_DMACFG_REG, 0x50); - dma_cfg = (sscape->ic_type == IC_ODIE ? 0x70 : 0x40); + dma_cfg = (sscape->ic_type == IC_OPUS ? 0x40 : 0x70); sscape_write_unsafe(sscape->io_base, GA_DMAA_REG, dma_cfg); sscape_write_unsafe(sscape->io_base, GA_DMAB_REG, 0x20); + mpu_irq_cfg |= mpu_irq_cfg << 2; + val = sscape_read_unsafe(sscape->io_base, GA_HMCTL_REG) & 0xF7; + if (joystick[dev]) + val |= 8; + sscape_write_unsafe(sscape->io_base, GA_HMCTL_REG, val | 0x10); + sscape_write_unsafe(sscape->io_base, GA_INTCFG_REG, 0xf0 | mpu_irq_cfg); sscape_write_unsafe(sscape->io_base, - GA_INTCFG_REG, 0xf0 | (mpu_irq_cfg << 2) | mpu_irq_cfg); - sscape_write_unsafe(sscape->io_base, - GA_CDCFG_REG, 0x09 | DMA_8BIT | (params->dma1 << 4) | (irq_cfg << 1)); + GA_CDCFG_REG, 0x09 | DMA_8BIT + | (dma[dev] << 4) | (irq_cfg << 1)); + /* + * Enable the master IRQ ... + */ + sscape_write_unsafe(sscape->io_base, GA_INTENA_REG, 0x80); spin_unlock_irqrestore(&sscape->lock, flags); @@ -1245,30 +1067,60 @@ static int __devinit create_sscape(const struct params *params, snd_card_t **rca * We have now enabled the codec chip, and so we should * detect the AD1845 device ... */ - if ((err = create_ad1845(card, CODEC_IO(params->port), params->irq, params->dma1)) < 0) { - printk(KERN_ERR "sscape: No AD1845 device at 0x%x, IRQ %d\n", - CODEC_IO(params->port), params->irq); - goto _release_card; - } -#define MIDI_DEVNUM 0 - if ((err = create_mpu401(card, MIDI_DEVNUM, MPU401_IO(params->port), params->mpu_irq)) < 0) { - printk(KERN_ERR "sscape: Failed to create MPU-401 device at 0x%x\n", - MPU401_IO(params->port)); - goto _release_card; + err = create_ad1845(card, wss_port[dev], irq[dev], + dma[dev], dma2[dev]); + if (err < 0) { + snd_printk(KERN_ERR + "sscape: No AD1845 device at 0x%lx, IRQ %d\n", + wss_port[dev], irq[dev]); + goto _release_dma; } + strcpy(card->driver, "SoundScape"); + strcpy(card->shortname, name); + snprintf(card->longname, sizeof(card->longname), + "%s at 0x%lx, IRQ %d, DMA1 %d, DMA2 %d\n", + name, sscape->chip->port, sscape->chip->irq, + sscape->chip->dma1, sscape->chip->dma2); - /* - * Enable the master IRQ ... - */ - sscape_write(sscape, GA_INTENA_REG, 0x80); +#define MIDI_DEVNUM 0 + if (sscape->type != SSCAPE_VIVO) { + err = sscape_upload_bootblock(card); + if (err >= 0) + err = sscape_upload_microcode(card, err); + + if (err == 0) { + err = create_mpu401(card, MIDI_DEVNUM, port[dev], + mpu_irq[dev]); + if (err < 0) { + snd_printk(KERN_ERR "sscape: Failed to create " + "MPU-401 device at 0x%lx\n", + port[dev]); + goto _release_dma; + } - /* - * Initialize mixer - */ - sscape->midi_vol = 0; - host_write_ctrl_unsafe(sscape->io_base, CMD_SET_MIDI_VOL, 100); - host_write_ctrl_unsafe(sscape->io_base, 0, 100); - host_write_ctrl_unsafe(sscape->io_base, CMD_XXX_MIDI_VOL, 100); + /* + * Initialize mixer + */ + spin_lock_irqsave(&sscape->lock, flags); + sscape->midi_vol = 0; + host_write_ctrl_unsafe(sscape->io_base, + CMD_SET_MIDI_VOL, 100); + host_write_ctrl_unsafe(sscape->io_base, + sscape->midi_vol, 100); + host_write_ctrl_unsafe(sscape->io_base, + CMD_XXX_MIDI_VOL, 100); + host_write_ctrl_unsafe(sscape->io_base, + sscape->midi_vol, 100); + host_write_ctrl_unsafe(sscape->io_base, + CMD_SET_EXTMIDI, 100); + host_write_ctrl_unsafe(sscape->io_base, + 0, 100); + host_write_ctrl_unsafe(sscape->io_base, CMD_ACK, 100); + + set_midi_mode_unsafe(sscape->io_base); + spin_unlock_irqrestore(&sscape->lock, flags); + } + } /* * Now that we have successfully created this sound card, @@ -1277,143 +1129,189 @@ static int __devinit create_sscape(const struct params *params, snd_card_t **rca * function now that our "constructor" has completed. */ card->private_free = soundscape_free; - *rcardp = card; return 0; - _release_card: - snd_card_free(card); - - _release_dma: - free_dma(params->dma1); +_release_dma: + free_dma(dma[dev]); - _release_region: - release_resource(io_res); - kfree_nocheck(io_res); +_release_region: + release_and_free_resource(wss_res); + release_and_free_resource(io_res); return err; } -static int sscape_cards __devinitdata; -static struct params sscape_params[SNDRV_CARDS] __devinitdata; - -#ifdef CONFIG_PNP -static inline int __devinit get_next_autoindex(int i) +static int snd_sscape_match(struct device *pdev, unsigned int i) { - while ((i < SNDRV_CARDS) && (port[i] != SNDRV_AUTO_PORT)) { - ++i; - } /* while */ + /* + * Make sure we were given ALL of the other parameters. + */ + if (port[i] == SNDRV_AUTO_PORT) + return 0; + + if (irq[i] == SNDRV_AUTO_IRQ || + mpu_irq[i] == SNDRV_AUTO_IRQ || + dma[i] == SNDRV_AUTO_DMA) { + printk(KERN_INFO + "sscape: insufficient parameters, " + "need IO, IRQ, MPU-IRQ and DMA\n"); + return 0; + } - return i; + return 1; } - -static inline int __devinit is_port_known(unsigned io, struct params *params, int cards) +static int snd_sscape_probe(struct device *pdev, unsigned int dev) { - while (--cards >= 0) { - if (params[cards].port == io) - return 1; - } /* while */ + struct snd_card *card; + struct soundscape *sscape; + int ret; + + ret = snd_card_new(pdev, index[dev], id[dev], THIS_MODULE, + sizeof(struct soundscape), &card); + if (ret < 0) + return ret; + + sscape = get_card_soundscape(card); + sscape->type = SSCAPE; + + dma[dev] &= 0x03; + + ret = create_sscape(dev, card); + if (ret < 0) + goto _release_card; + ret = snd_card_register(card); + if (ret < 0) { + snd_printk(KERN_ERR "sscape: Failed to register sound card\n"); + goto _release_card; + } + dev_set_drvdata(pdev, card); return 0; + +_release_card: + snd_card_free(card); + return ret; } -static int __devinit sscape_pnp_detect(struct pnp_card_link *pcard, - const struct pnp_card_device_id *pid) +static int snd_sscape_remove(struct device *devptr, unsigned int dev) +{ + snd_card_free(dev_get_drvdata(devptr)); + return 0; +} + +#define DEV_NAME "sscape" + +static struct isa_driver snd_sscape_driver = { + .match = snd_sscape_match, + .probe = snd_sscape_probe, + .remove = snd_sscape_remove, + /* FIXME: suspend/resume */ + .driver = { + .name = DEV_NAME + }, +}; + +#ifdef CONFIG_PNP +static inline int get_next_autoindex(int i) +{ + while (i < SNDRV_CARDS && port[i] != SNDRV_AUTO_PORT) + ++i; + return i; +} + + +static int sscape_pnp_detect(struct pnp_card_link *pcard, + const struct pnp_card_device_id *pid) { - struct pnp_dev *dev; static int idx = 0; + struct pnp_dev *dev; + struct snd_card *card; + struct soundscape *sscape; int ret; /* * Allow this function to fail *quietly* if all the ISA PnP * devices were configured using module parameters instead. */ - if ((idx = get_next_autoindex(idx)) >= SNDRV_CARDS) { + idx = get_next_autoindex(idx); + if (idx >= SNDRV_CARDS) return -ENOSPC; - } /* - * We have found a candidate ISA PnP card. Now we - * have to check that it has the devices that we - * expect it to have. - * - * We will NOT try and autoconfigure all of the resources - * needed and then activate the card as we are assuming that - * has already been done at boot-time using /proc/isapnp. - * We shall simply try to give each active card the resources - * that it wants. This is a sensible strategy for a modular - * system where unused modules are unloaded regularly. - * - * This strategy is utterly useless if we compile the driver - * into the kernel, of course. + * Check that we still have room for another sound card ... */ - // printk(KERN_INFO "sscape: %s\n", card->name); + dev = pnp_request_card_device(pcard, pid->devs[0].id, NULL); + if (!dev) + return -ENODEV; + + if (!pnp_is_active(dev)) { + if (pnp_activate_dev(dev) < 0) { + snd_printk(KERN_INFO "sscape: device is inactive\n"); + return -EBUSY; + } + } /* - * Check that we still have room for another sound card ... + * Create a new ALSA sound card entry, in anticipation + * of detecting our hardware ... */ - if (sscape_cards >= SNDRV_CARDS) { - printk(KERN_ERR "sscape: No room for another ALSA device\n"); - return -ENOSPC; - } + ret = snd_card_new(&pcard->card->dev, + index[idx], id[idx], THIS_MODULE, + sizeof(struct soundscape), &card); + if (ret < 0) + return ret; - ret = -ENODEV; + sscape = get_card_soundscape(card); - dev = pnp_request_card_device(pcard, pid->devs[0].id, NULL); - if (dev) { - struct params *this; - if (!pnp_is_active(dev)) { - if (pnp_activate_dev(dev) < 0) { - printk(KERN_INFO "sscape: device is inactive\n"); - return -EBUSY; - } - } - /* - * Read the correct parameters off the ISA PnP bus ... - */ - this = init_params(&sscape_params[sscape_cards], - index[idx], - id[idx], - pnp_port_start(dev, 0), - pnp_irq(dev, 0), - pnp_irq(dev, 1), - pnp_dma(dev, 0)); + /* + * Identify card model ... + */ + if (!strncmp("ENS4081", pid->id, 7)) + sscape->type = SSCAPE_VIVO; + else + sscape->type = SSCAPE_PNP; - /* - * Do we know about this sound card already? - */ - if ( !is_port_known(this->port, sscape_params, sscape_cards) ) { - snd_card_t *card; - - ret = create_sscape(this, &card); - if (ret < 0) - return ret; - snd_card_set_dev(card, &pcard->card->dev); - - if ((ret = snd_card_register(card)) < 0) { - printk(KERN_ERR "sscape: Failed to register sound card\n"); - snd_card_free(card); - return ret; - } + /* + * Read the correct parameters off the ISA PnP bus ... + */ + port[idx] = pnp_port_start(dev, 0); + irq[idx] = pnp_irq(dev, 0); + mpu_irq[idx] = pnp_irq(dev, 1); + dma[idx] = pnp_dma(dev, 0) & 0x03; + if (sscape->type == SSCAPE_PNP) { + dma2[idx] = dma[idx]; + wss_port[idx] = CODEC_IO(port[idx]); + } else { + wss_port[idx] = pnp_port_start(dev, 1); + dma2[idx] = pnp_dma(dev, 1); + } - pnp_set_card_drvdata(pcard, card); - ++sscape_cards; - ++idx; - } + ret = create_sscape(idx, card); + if (ret < 0) + goto _release_card; + + ret = snd_card_register(card); + if (ret < 0) { + snd_printk(KERN_ERR "sscape: Failed to register sound card\n"); + goto _release_card; } + pnp_set_card_drvdata(pcard, card); + ++idx; + return 0; + +_release_card: + snd_card_free(card); return ret; } -static void __devexit sscape_pnp_remove(struct pnp_card_link * pcard) +static void sscape_pnp_remove(struct pnp_card_link *pcard) { - snd_card_t *card = (snd_card_t *) pnp_get_card_drvdata(pcard); - + snd_card_free(pnp_get_card_drvdata(pcard)); pnp_set_card_drvdata(pcard, NULL); - snd_card_disconnect(card); - snd_card_free_in_thread(card); } static struct pnp_card_driver sscape_pnpc_driver = { @@ -1421,108 +1319,38 @@ static struct pnp_card_driver sscape_pnpc_driver = { .name = "sscape", .id_table = sscape_pnpids, .probe = sscape_pnp_detect, - .remove = __devexit_p(sscape_pnp_remove), + .remove = sscape_pnp_remove, }; #endif /* CONFIG_PNP */ -static int __init sscape_manual_probe(struct params *params) +static int __init sscape_init(void) { - int ret; - unsigned i; - snd_card_t *card; - - for (i = 0; i < SNDRV_CARDS; ++i) { - /* - * We do NOT probe for ports. - * If we're not given a port number for this - * card then we completely ignore this line - * of parameters. - */ - if (port[i] == SNDRV_AUTO_PORT) - continue; - - /* - * Make sure we were given ALL of the other parameters. - */ - if ( (irq[i] == SNDRV_AUTO_IRQ) || - (mpu_irq[i] == SNDRV_AUTO_IRQ) || - (dma[i] == SNDRV_AUTO_DMA) ) { - printk(KERN_INFO - "sscape: insufficient parameters, need IO, IRQ, MPU-IRQ and DMA\n"); - return -ENXIO; - } - - /* - * This cards looks OK ... - */ - init_params(params, index[i], id[i], port[i], irq[i], mpu_irq[i], dma[i]); - - ret = create_sscape(params, &card); - if (ret < 0) - return ret; - - if ((ret = snd_card_set_generic_dev(card)) < 0) { - snd_card_free(card); - return ret; - } - if ((ret = snd_card_register(card)) < 0) { - printk(KERN_ERR "sscape: Failed to register sound card\n"); - snd_card_free(card); - return ret; - } - - sscape_card[sscape_cards] = card; - params++; - sscape_cards++; - } /* for */ - - return 0; -} + int err; + err = isa_register_driver(&snd_sscape_driver, SNDRV_CARDS); +#ifdef CONFIG_PNP + if (!err) + isa_registered = 1; -static void sscape_exit(void) -{ - unsigned i; + err = pnp_register_card_driver(&sscape_pnpc_driver); + if (!err) + pnp_registered = 1; -#ifdef CONFIG_PNP - pnp_unregister_card_driver(&sscape_pnpc_driver); + if (isa_registered) + err = 0; #endif - for (i = 0; i < ARRAY_SIZE(sscape_card); ++i) { - snd_card_free(sscape_card[i]); - } /* for */ + return err; } - -static int __init sscape_init(void) +static void __exit sscape_exit(void) { - int ret; - - /* - * First check whether we were passed any parameters. - * These MUST take precedence over ANY automatic way - * of allocating cards, because the operator is - * S-P-E-L-L-I-N-G it out for us... - */ - ret = sscape_manual_probe(sscape_params); - if (ret < 0) { - int i; - for (i = 0; i < sscape_cards; ++i) - snd_card_free(sscape_card[i]); - return ret; - } - #ifdef CONFIG_PNP - if (sscape_cards < SNDRV_CARDS) { - ret = pnp_register_card_driver(&sscape_pnpc_driver); - if (ret < 0) { - sscape_exit(); - return ret; - } - } + if (pnp_registered) + pnp_unregister_card_driver(&sscape_pnpc_driver); + if (isa_registered) #endif - - return 0; + isa_unregister_driver(&snd_sscape_driver); } module_init(sscape_init); |