1 files changed, 6 insertions, 15 deletions
diff --git a/sound/isa/gus/interwave.c b/sound/isa/gus/interwave.c
index 78bc5744e89..ad55e5cb8e9 100644
--- a/sound/isa/gus/interwave.c
+++ b/sound/isa/gus/interwave.c
@@ -442,18 +442,11 @@ static void snd_interwave_detect_memory(struct snd_gus_card *gus)
 	for (bank_pos = 0; bank_pos < 16L * 1024L * 1024L; bank_pos += 4L * 1024L * 1024L) {
 		for (i = 0; i < 8; ++i)
 			iwave[i] = snd_gf1_peek(gus, bank_pos + i);
-#ifdef CONFIG_SND_DEBUG_ROM
-		printk(KERN_DEBUG "ROM at 0x%06x = %*phC\n", bank_pos,
-				  8, iwave);
-#endif
 		if (strncmp(iwave, "INTRWAVE", 8))
 			continue;	/* first check */
 		csum = 0;
 		for (i = 0; i < sizeof(struct rom_hdr); i++)
 			csum += snd_gf1_peek(gus, bank_pos + i);
-#ifdef CONFIG_SND_DEBUG_ROM
-		printk(KERN_DEBUG "ROM checksum = 0x%x (computed)\n", csum);
-#endif
 		if (csum != 0)
 			continue;	/* not valid rom */
 		gus->gf1.rom_banks++;
@@ -626,14 +619,15 @@ static void snd_interwave_free(struct snd_card *card)
 		free_irq(iwcard->irq, (void *)iwcard);
 }
 
-static int snd_interwave_card_new(int dev, struct snd_card **cardp)
+static int snd_interwave_card_new(struct device *pdev, int dev,
+				  struct snd_card **cardp)
 {
 	struct snd_card *card;
 	struct snd_interwave *iwcard;
 	int err;
 
-	err = snd_card_create(index[dev], id[dev], THIS_MODULE,
-			      sizeof(struct snd_interwave), &card);
+	err = snd_card_new(pdev, index[dev], id[dev], THIS_MODULE,
+			   sizeof(struct snd_interwave), &card);
 	if (err < 0)
 		return err;
 	iwcard = card->private_data;
@@ -780,11 +774,10 @@ static int snd_interwave_isa_probe1(int dev, struct device *devptr)
 	struct snd_card *card;
 	int err;
 
-	err = snd_interwave_card_new(dev, &card);
+	err = snd_interwave_card_new(devptr, dev, &card);
 	if (err < 0)
 		return err;
 
-	snd_card_set_dev(card, devptr);
 	if ((err = snd_interwave_probe(card, dev)) < 0) {
 		snd_card_free(card);
 		return err;
@@ -849,7 +842,6 @@ static int snd_interwave_isa_probe(struct device *pdev,
 static int snd_interwave_isa_remove(struct device *devptr, unsigned int dev)
 {
 	snd_card_free(dev_get_drvdata(devptr));
-	dev_set_drvdata(devptr, NULL);
 	return 0;
 }
 
@@ -878,7 +870,7 @@ static int snd_interwave_pnp_detect(struct pnp_card_link *pcard,
 	if (dev >= SNDRV_CARDS)
 		return -ENODEV;
 				
-	res = snd_interwave_card_new(dev, &card);
+	res = snd_interwave_card_new(&pcard->card->dev, dev, &card);
 	if (res < 0)
 		return res;
 
@@ -886,7 +878,6 @@ static int snd_interwave_pnp_detect(struct pnp_card_link *pcard,
 		snd_card_free(card);
 		return res;
 	}
-	snd_card_set_dev(card, &pcard->card->dev);
 	if ((res = snd_interwave_probe(card, dev)) < 0) {
 		snd_card_free(card);
 		return res;
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 96b91982805..87b7c7581b1 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -1,14 +1,28 @@
-#
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.txt.
-#
 config M68K
 	bool
 	default y
-
-config MMU
-	bool
-	default y
+	select ARCH_MIGHT_HAVE_PC_PARPORT if ISA
+	select HAVE_IDE
+	select HAVE_AOUT if MMU
+	select HAVE_DEBUG_BUGVERBOSE
+	select GENERIC_IRQ_SHOW
+	select GENERIC_ATOMIC64
+	select HAVE_UID16
+	select VIRT_TO_BUS
+	select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
+	select GENERIC_CPU_DEVICES
+	select GENERIC_IOMAP
+	select GENERIC_STRNCPY_FROM_USER if MMU
+	select GENERIC_STRNLEN_USER if MMU
+	select FPU if MMU
+	select ARCH_WANT_IPC_PARSE_VERSION
+	select ARCH_USES_GETTIMEOFFSET if MMU && !COLDFIRE
+	select HAVE_FUTEX_CMPXCHG if MMU && FUTEX
+	select HAVE_MOD_ARCH_SPECIFIC
+	select MODULES_USE_ELF_REL
+	select MODULES_USE_ELF_RELA
+	select OLD_SIGSUSPEND3
+	select OLD_SIGACTION
 
 config RWSEM_GENERIC_SPINLOCK
 	bool
@@ -17,630 +31,129 @@ config RWSEM_GENERIC_SPINLOCK
 config RWSEM_XCHGADD_ALGORITHM
 	bool
 
-config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
-
-config ARCH_MAY_HAVE_PC_FDC
-	bool
-	depends on Q40 || (BROKEN && SUN3X)
-	default y
-
-mainmenu "Linux/68k Kernel Configuration"
-
-source "init/Kconfig"
-
-menu "Platform dependent setup"
-
-config EISA
+config ARCH_HAS_ILOG2_U32
 	bool
-	---help---
-	  The Extended Industry Standard Architecture (EISA) bus was
-	  developed as an open alternative to the IBM MicroChannel bus.
 
-	  The EISA bus provided some of the features of the IBM MicroChannel
-	  bus while maintaining backward compatibility with cards made for
-	  the older ISA bus.  The EISA bus saw limited use between 1988 and
-	  1995 when it was made obsolete by the PCI bus.
-
-	  Say Y here if you are building a kernel for an EISA-based machine.
-
-	  Otherwise, say N.
-
-config MCA
+config ARCH_HAS_ILOG2_U64
 	bool
-	help
-	  MicroChannel Architecture is found in some IBM PS/2 machines and
-	  laptops.  It is a bus system similar to PCI or ISA. See
-	  <file:Documentation/mca.txt> (and especially the web page given
-	  there) before attempting to build an MCA bus kernel.
-
-config PCMCIA
-	tristate
-	---help---
-	  Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
-	  computer.  These are credit-card size devices such as network cards,
-	  modems or hard drives often used with laptops computers.  There are
-	  actually two varieties of these cards: the older 16 bit PCMCIA cards
-	  and the newer 32 bit CardBus cards.  If you want to use CardBus
-	  cards, you need to say Y here and also to "CardBus support" below.
-
-	  To use your PC-cards, you will need supporting software from David
-	  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
-	  for location).  Please also read the PCMCIA-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as modules, choose M here: the
-	  modules will be called pcmcia_core and ds.
-
-config SUN3
-	bool "Sun3 support"
-	select M68020
-	select MMU_SUN3 if MMU
-	help
-	  This option enables support for the Sun 3 series of workstations
-	  (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires
-	  that all other hardware types must be disabled, as Sun 3 kernels
-	  are incompatible with all other m68k targets (including Sun 3x!).
-
-	  If you don't want to compile a kernel exclusively for a Sun 3, say N.
-
-config AMIGA
-	bool "Amiga support"
-	depends on !MMU_SUN3
-	help
-	  This option enables support for the Amiga series of computers. If
-	  you plan to use this kernel on an Amiga, say Y here and browse the
-	  material available in <file:Documentation/m68k>; otherwise say N.
 
-config ATARI
-	bool "Atari support"
-	depends on !MMU_SUN3
-	help
-	  This option enables support for the 68000-based Atari series of
-	  computers (including the TT, Falcon and Medusa). If you plan to use
-	  this kernel on an Atari, say Y here and browse the material
-	  available in <file:Documentation/m68k>; otherwise say N.
-
-config HADES
-	bool "Hades support"
-	depends on ATARI && BROKEN
-	help
-	  This option enables support for the Hades Atari clone. If you plan
-	  to use this kernel on a Hades, say Y here; otherwise say N.
-
-config PCI
+config GENERIC_HWEIGHT
 	bool
-	depends on HADES
 	default y
-	help
-	  Find out whether you have a PCI motherboard. PCI is the name of a
-	  bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
-	  VESA. If you have PCI, say Y, otherwise N.
-
-	  The PCI-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>, contains valuable
-	  information about which PCI hardware does work under Linux and which
-	  doesn't.
-
-config MAC
-	bool "Macintosh support"
-	depends on !MMU_SUN3
-	help
-	  This option enables support for the Apple Macintosh series of
-	  computers (yes, there is experimental support now, at least for part
-	  of the series).
-
-	  Say N unless you're willing to code the remaining necessary support.
-	  ;)
 
-config NUBUS
+config GENERIC_CALIBRATE_DELAY
 	bool
-	depends on MAC
 	default y
 
-config M68K_L2_CACHE
+config GENERIC_CSUM
 	bool
-	depends on MAC
-	default y
-
-config APOLLO
-	bool "Apollo support"
-	depends on !MMU_SUN3
-	help
-	  Say Y here if you want to run Linux on an MC680x0-based Apollo
-	  Domain workstation such as the DN3500.
 
-config VME
-	bool "VME (Motorola and BVM) support"
-	depends on !MMU_SUN3
-	help
-	  Say Y here if you want to build a kernel for a 680x0 based VME
-	  board.  Boards currently supported include Motorola boards MVME147,
-	  MVME162, MVME166, MVME167, MVME172, and MVME177.  BVME4000 and
-	  BVME6000 boards from BVM Ltd are also supported.
-
-config MVME147
-	bool "MVME147 support"
-	depends on VME
-	help
-	  Say Y to include support for early Motorola VME boards.  This will
-	  build a kernel which can run on MVME147 single-board computers.  If
-	  you select this option you will have to select the appropriate
-	  drivers for SCSI, Ethernet and serial ports later on.
-
-config MVME16x
-	bool "MVME162, 166 and 167 support"
-	depends on VME
-	help
-	  Say Y to include support for Motorola VME boards.  This will build a
-	  kernel which can run on MVME162, MVME166, MVME167, MVME172, and
-	  MVME177 boards.  If you select this option you will have to select
-	  the appropriate drivers for SCSI, Ethernet and serial ports later
-	  on.
-
-config BVME6000
-	bool "BVME4000 and BVME6000 support"
-	depends on VME
-	help
-	  Say Y to include support for VME boards from BVM Ltd.  This will
-	  build a kernel which can run on BVME4000 and BVME6000 boards.  If
-	  you select this option you will have to select the appropriate
-	  drivers for SCSI, Ethernet and serial ports later on.
-
-config HP300
-	bool "HP9000/300 and HP9000/400 support"
-	depends on !MMU_SUN3
-	help
-	  This option enables support for the HP9000/300 and HP9000/400 series
-	  of workstations. Support for these machines is still somewhat
-	  experimental. If you plan to try to use the kernel on such a machine
-	  say Y here.
-	  Everybody else says N.
-
-config DIO
-	bool "DIO bus support"
-	depends on HP300
+config TIME_LOW_RES
+	bool
 	default y
-	help
-	  Say Y here to enable support for the "DIO" expansion bus used in
-	  HP300 machines. If you are using such a system you almost certainly
-	  want this.
-
-config SUN3X
-	bool "Sun3x support"
-	depends on !MMU_SUN3
-	select M68030
-	help
-	  This option enables support for the Sun 3x series of workstations.
-	  Be warned that this support is very experimental.
-	  Note that Sun 3x kernels are not compatible with Sun 3 hardware.
-	  General Linux information on the Sun 3x series (now discontinued)
-	  is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
 
-	  If you don't want to compile a kernel for a Sun 3x, say N.
+config NO_IOPORT_MAP
+	def_bool y
 
-config Q40
-	bool "Q40/Q60 support"
-	depends on !MMU_SUN3
-	help
-	  The Q40 is a Motorola 68040-based successor to the Sinclair QL
-	  manufactured in Germany.  There is an official Q40 home page at
-	  <http://www.q40.de/>.  This option enables support for the Q40 and
-	  Q60. Select your CPU below.  For 68LC060 don't forget to enable FPU
-	  emulation.
+config NO_DMA
+	def_bool (MMU && SUN3) || (!MMU && !COLDFIRE)
 
-comment "Processor type"
-
-config M68020
-	bool "68020 support"
-	help
-	  If you anticipate running this kernel on a computer with a MC68020
-	  processor, say Y. Otherwise, say N. Note that the 68020 requires a
-	  68851 MMU (Memory Management Unit) to run Linux/m68k, except on the
-	  Sun 3, which provides its own version.
-
-config M68030
-	bool "68030 support"
-	depends on !MMU_SUN3
-	help
-	  If you anticipate running this kernel on a computer with a MC68030
-	  processor, say Y. Otherwise, say N. Note that a MC68EC030 will not
-	  work, as it does not include an MMU (Memory Management Unit).
-
-config M68040
-	bool "68040 support"
-	depends on !MMU_SUN3
-	help
-	  If you anticipate running this kernel on a computer with a MC68LC040
-	  or MC68040 processor, say Y. Otherwise, say N. Note that an
-	  MC68EC040 will not work, as it does not include an MMU (Memory
-	  Management Unit).
-
-config M68060
-	bool "68060 support"
-	depends on !MMU_SUN3
-	help
-	  If you anticipate running this kernel on a computer with a MC68060
-	  processor, say Y. Otherwise, say N.
-
-config MMU_MOTOROLA
+config ZONE_DMA
 	bool
-	depends on MMU && !MMU_SUN3
 	default y
 
-config MMU_SUN3
-	bool
-
-config M68KFPU_EMU
-	bool "Math emulation support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	help
-	  At some point in the future, this will cause floating-point math
-	  instructions to be emulated by the kernel on machines that lack a
-	  floating-point math coprocessor.  Thrill-seekers and chronically
-	  sleep-deprived psychotic hacker types can say Y now, everyone else
-	  should probably wait a while.
-
-config M68KFPU_EMU_EXTRAPREC
-	bool "Math emulation extra precision"
-	depends on M68KFPU_EMU
-	help
-	  The fpu uses normally a few bit more during calculations for
-	  correct rounding, the emulator can (often) do the same but this
-	  extra calculation can cost quite some time, so you can disable
-	  it here. The emulator will then "only" calculate with a 64 bit
-	  mantissa and round slightly incorrect, what is more then enough
-	  for normal usage.
-
-config M68KFPU_EMU_ONLY
-	bool "Math emulation only kernel"
-	depends on M68KFPU_EMU
-	help
-	  This option prevents any floating-point instructions from being
-	  compiled into the kernel, thereby the kernel doesn't save any
-	  floating point context anymore during task switches, so this
-	  kernel will only be usable on machines without a floating-point
-	  math coprocessor. This makes the kernel a bit faster as no tests
-	  needs to be executed whether a floating-point instruction in the
-	  kernel should be executed or not.
-
-config ADVANCED
-	bool "Advanced configuration options"
-	---help---
-	  This gives you access to some advanced options for the CPU. The
-	  defaults should be fine for most users, but these options may make
-	  it possible for you to improve performance somewhat if you know what
-	  you are doing.
-
-	  Note that the answer to this question won't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about these options.
-
-	  Most users should say N to this question.
-
-config RMW_INSNS
-	bool "Use read-modify-write instructions"
-	depends on ADVANCED
-	---help---
-	  This allows to use certain instructions that work with indivisible
-	  read-modify-write bus cycles. While this is faster than the
-	  workaround of disabling interrupts, it can conflict with DMA
-	  ( = direct memory access) on many Amiga systems, and it is also said
-	  to destabilize other machines. It is very likely that this will
-	  cause serious problems on any Amiga or Atari Medusa if set. The only
-	  configuration where it should work are 68030-based Ataris, where it
-	  apparently improves performance. But you've been warned! Unless you
-	  really know what you are doing, say N. Try Y only if you're quite
-	  adventurous.
-
-config SINGLE_MEMORY_CHUNK
-	bool "Use one physical chunk of memory only"
-	depends on ADVANCED && !SUN3
-	help
-	  Ignore all but the first contiguous chunk of physical memory for VM
-	  purposes.  This will save a few bytes kernel size and may speed up
-	  some operations.  Say N if not sure.
-
-config 060_WRITETHROUGH
-	bool "Use write-through caching for 68060 supervisor accesses"
-	depends on ADVANCED && M68060
-	---help---
-	  The 68060 generally uses copyback caching of recently accessed data.
-	  Copyback caching means that memory writes will be held in an on-chip
-	  cache and only written back to memory some time later.  Saying Y
-	  here will force supervisor (kernel) accesses to use writethrough
-	  caching.  Writethrough caching means that data is written to memory
-	  straight away, so that cache and memory data always agree.
-	  Writethrough caching is less efficient, but is needed for some
-	  drivers on 68060 based systems where the 68060 bus snooping signal
-	  is hardwired on.  The 53c710 SCSI driver is known to suffer from
-	  this problem.
-
-source "mm/Kconfig"
+config HZ
+	int
+	default 1000 if CLEOPATRA
+	default 100
 
-endmenu
-
-menu "General setup"
-
-source "fs/Kconfig.binfmt"
-
-config ZORRO
-	bool "Amiga Zorro (AutoConfig) bus support"
-	depends on AMIGA
-	help
-	  This enables support for the Zorro bus in the Amiga. If you have
-	  expansion cards in your Amiga that conform to the Amiga
-	  AutoConfig(tm) specification, say Y, otherwise N. Note that even
-	  expansion cards that do not fit in the Zorro slots but fit in e.g.
-	  the CPU slot may fall in this category, so you have to say Y to let
-	  Linux use these.
-
-config AMIGA_PCMCIA
-	bool "Amiga 1200/600 PCMCIA support (EXPERIMENTAL)"
-	depends on AMIGA && EXPERIMENTAL
-	help
-	  Include support in the kernel for pcmcia on Amiga 1200 and Amiga
-	  600. If you intend to use pcmcia cards say Y; otherwise say N.
-
-config STRAM_PROC
-	bool "ST-RAM statistics in /proc"
-	depends on ATARI
-	help
-	  Say Y here to report ST-RAM usage statistics in /proc/stram.
+source "init/Kconfig"
 
-config HEARTBEAT
-	bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40
-	default y if !AMIGA && !APOLLO && !ATARI && !MAC && !Q40 && HP300
-	help
-	  Use the power-on LED on your machine as a load meter.  The exact
-	  behavior is platform-dependent, but normally the flash frequency is
-	  a hyperbolic function of the 5-minute load average.
+source "kernel/Kconfig.freezer"
 
-# We have a dedicated heartbeat LED. :-)
-config PROC_HARDWARE
-	bool "/proc/hardware support"
-	help
-	  Say Y here to support the /proc/hardware file, which gives you
-	  access to information about the machine you're running on,
-	  including the model, CPU, MMU, clock speed, BogoMIPS rating,
-	  and memory size.
-
-config ISA
-	bool
-	depends on Q40 || AMIGA_PCMCIA || GG2
+config MMU
+	bool "MMU-based Paged Memory Management Support"
 	default y
 	help
-	  Find out whether you have ISA slots on your motherboard.  ISA is the
-	  name of a bus system, i.e. the way the CPU talks to the other stuff
-	  inside your box.  Other bus systems are PCI, EISA, MicroChannel
-	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
-	  newer boards don't support it.  If you have ISA, say Y, otherwise N.
+	  Select if you want MMU-based virtualised addressing space
+	  support by paged memory management. If unsure, say 'Y'.
 
-config GENERIC_ISA_DMA
+config MMU_MOTOROLA
 	bool
-	depends on Q40 || AMIGA_PCMCIA || GG2
-	default y
-
-source "drivers/pci/Kconfig"
-
-source "drivers/zorro/Kconfig"
-
-endmenu
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-menu "Character devices"
-
-config ATARI_MFPSER
-	tristate "Atari MFP serial support"
-	depends on ATARI
-	---help---
-	  If you like to use the MFP serial ports ("Modem1", "Serial1") under
-	  Linux, say Y. The driver equally supports all kinds of MFP serial
-	  ports and automatically detects whether Serial1 is available.
-
-	  To compile this driver as a module, choose M here.
-
-	  Note for Falcon users: You also have an MFP port, it's just not
-	  wired to the outside... But you could use the port under Linux.
 
-config ATARI_SCC
-	tristate "Atari SCC serial support"
-	depends on ATARI
-	---help---
-	  If you have serial ports based on a Zilog SCC chip (Modem2, Serial2,
-	  LAN) and like to use them under Linux, say Y. All built-in SCC's are
-	  supported (TT, MegaSTE, Falcon), and also the ST-ESCC. If you have
-	  two connectors for channel A (Serial2 and LAN), they are visible as
-	  two separate devices.
+config MMU_COLDFIRE
+	bool
 
-	  To compile this driver as a module, choose M here.
+config MMU_SUN3
+	bool
+	depends on MMU && !MMU_MOTOROLA && !MMU_COLDFIRE
 
-config ATARI_SCC_DMA
-	bool "Atari SCC serial DMA support"
-	depends on ATARI_SCC
-	help
-	  This enables DMA support for receiving data on channel A of the SCC.
-	  If you have a TT you may say Y here and read
-	  drivers/char/atari_SCC.README. All other users should say N here,
-	  because only the TT has SCC-DMA, even if your machine keeps claiming
-	  so at boot time.
-
-config ATARI_MIDI
-	tristate "Atari MIDI serial support"
-	depends on ATARI
+config KEXEC
+	bool "kexec system call"
+	depends on M68KCLASSIC
 	help
-	  If you want to use your Atari's MIDI port in Linux, say Y.
+	  kexec is a system call that implements the ability to shutdown your
+	  current kernel, and to start another kernel.  It is like a reboot
+	  but it is independent of the system firmware.   And like a reboot
+	  you can start any kernel with it, not just Linux.
 
-	  To compile this driver as a module, choose M here.
+	  The name comes from the similarity to the exec system call.
 
-config ATARI_DSP56K
-	tristate "Atari DSP56k support (EXPERIMENTAL)"
-	depends on ATARI && EXPERIMENTAL
-	help
-	  If you want to be able to use the DSP56001 in Falcons, say Y. This
-	  driver is still experimental, and if you don't know what it is, or
-	  if you don't have this processor, just say N.
-
-	  To compile this driver as a module, choose M here.
+	  It is an ongoing process to be certain the hardware in a machine
+	  is properly shutdown, so do not be surprised if this code does not
+	  initially work for you.  As of this writing the exact hardware
+	  interface is strongly in flux, so no good recommendation can be
+	  made.
 
-config AMIGA_BUILTIN_SERIAL
-	tristate "Amiga builtin serial support"
-	depends on AMIGA
+config BOOTINFO_PROC
+	bool "Export bootinfo in procfs"
+	depends on KEXEC && M68KCLASSIC
 	help
-	  If you want to use your Amiga's built-in serial port in Linux,
-	  answer Y.
+	  Say Y to export the bootinfo used to boot the kernel in a
+	  "bootinfo" file in procfs.  This is useful with kexec.
 
-	  To compile this driver as a module, choose M here.
+menu "Platform setup"
 
-config WHIPPET_SERIAL
-	tristate "Hisoft Whippet PCMCIA serial support"
-	depends on AMIGA_PCMCIA
-	help
-	  HiSoft has a web page at <http://www.hisoft.co.uk/>, but there
-	  is no listing for the Whippet in their Amiga section.
+source arch/m68k/Kconfig.cpu
 
-config MULTIFACE_III_TTY
-	tristate "Multiface Card III serial support"
-	depends on AMIGA
-	help
-	  If you want to use a Multiface III card's serial port in Linux,
-	  answer Y.
+source arch/m68k/Kconfig.machine
 
-	  To compile this driver as a module, choose M here.
+source arch/m68k/Kconfig.bus
 
-config GVPIOEXT
-	tristate "GVP IO-Extender support"
-	depends on PARPORT=n && ZORRO
-	help
-	  If you want to use a GVP IO-Extender serial card in Linux, say Y.
-	  Otherwise, say N.
+endmenu
 
-config GVPIOEXT_LP
-	tristate "GVP IO-Extender parallel printer support"
-	depends on GVPIOEXT
-	help
-	  Say Y to enable driving a printer from the parallel port on your
-	  GVP IO-Extender card, N otherwise.
+menu "Kernel Features"
 
-config GVPIOEXT_PLIP
-	tristate "GVP IO-Extender PLIP support"
-	depends on GVPIOEXT
-	help
-	  Say Y to enable doing IP over the parallel port on your GVP
-	  IO-Extender card, N otherwise.
+if COLDFIRE
+source "kernel/Kconfig.preempt"
+endif
 
-config MAC_SCC
-	tristate "Macintosh serial support"
-	depends on MAC
+source "mm/Kconfig"
 
-config MAC_HID
-	bool
-	depends on INPUT_ADBHID
-	default y
+endmenu
 
-config MAC_ADBKEYCODES
-	bool "Support for ADB raw keycodes"
-	depends on INPUT_ADBHID
-	help
-	  This provides support for sending raw ADB keycodes to console
-	  devices.  This is the default up to 2.4.0, but in future this may be
-	  phased out in favor of generic Linux keycodes.  If you say Y here,
-	  you can dynamically switch via the
-	  /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes
-	  sysctl and with the "keyboard_sends_linux_keycodes=" kernel
-	  argument.
-
-	  If unsure, say Y here.
-
-config ADB_KEYBOARD
-	bool "Support for ADB keyboard (old driver)"
-	depends on MAC && !INPUT_ADBHID
-	help
-	  This option allows you to use an ADB keyboard attached to your
-	  machine. Note that this disables any other (ie. PS/2) keyboard
-	  support, even if your machine is physically capable of using both at
-	  the same time.
+menu "Executable file formats"
 
-	  If you use an ADB keyboard (4 pin connector), say Y here.
-	  If you use a PS/2 keyboard (6 pin connector), say N here.
+source "fs/Kconfig.binfmt"
 
-config HPDCA
-	tristate "HP DCA serial support"
-	depends on DIO && SERIAL_8250
-	help
-	  If you want to use the internal "DCA" serial ports on an HP300
-	  machine, say Y here.
+endmenu
 
-config HPAPCI
-	tristate "HP APCI serial support"
-	depends on HP300 && SERIAL_8250 && EXPERIMENTAL
-	help
-	  If you want to use the internal "APCI" serial ports on an HP400
-	  machine, say Y here.
+if !MMU
+menu "Power management options"
 
-config MVME147_SCC
-	bool "SCC support for MVME147 serial ports"
-	depends on MVME147
+config PM
+	bool "Power Management support"
 	help
-	  This is the driver for the serial ports on the Motorola MVME147
-	  boards.  Everyone using one of these boards should say Y here.
+	  Support processor power management modes
 
-config SERIAL167
-	bool "CD2401 support for MVME166/7 serial ports"
-	depends on MVME16x && BROKEN
-	help
-	  This is the driver for the serial ports on the Motorola MVME166,
-	  167, and 172 boards.  Everyone using one of these boards should say
-	  Y here.
+endmenu
+endif
 
-config MVME162_SCC
-	bool "SCC support for MVME162 serial ports"
-	depends on MVME16x
-	help
-	  This is the driver for the serial ports on the Motorola MVME162 and
-	  172 boards.  Everyone using one of these boards should say Y here.
+source "net/Kconfig"
 
-config BVME6000_SCC
-	bool "SCC support for BVME6000 serial ports"
-	depends on BVME6000
-	help
-	  This is the driver for the serial ports on the BVME4000 and BVME6000
-	  boards from BVM Ltd.  Everyone using one of these boards should say
-	  Y here.
-
-config DN_SERIAL
-	bool "Support for DN serial port (dummy)"
-	depends on APOLLO
-
-config SERIAL_CONSOLE
-	bool "Support for serial port console"
-	depends on (AMIGA || ATARI || MAC || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_SCC=y || ATARI_MIDI=y || MAC_SCC=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
-	---help---
-	  If you say Y here, it will be possible to use a serial port as the
-	  system console (the system console is the device which receives all
-	  kernel messages and warnings and which allows logins in single user
-	  mode). This could be useful if some terminal or printer is connected
-	  to that serial port.
-
-	  Even if you say Y here, the currently visible virtual console
-	  (/dev/tty0) will still be used as the system console by default, but
-	  you can alter that using a kernel command line option such as
-	  "console=ttyS1". (Try "man bootparam" or see the documentation of
-	  your boot loader (lilo or loadlin) about how to pass options to the
-	  kernel at boot time.)
-
-	  If you don't have a VGA card installed and you say Y here, the
-	  kernel will automatically use the first serial line, /dev/ttyS0, as
-	  system console.
-
-	  If unsure, say N.
+source "drivers/Kconfig"
 
-endmenu
+source "arch/m68k/Kconfig.devices"
 
 source "fs/Kconfig"
 
diff --git a/arch/m68k/Kconfig.bus b/arch/m68k/Kconfig.bus
new file mode 100644
index 00000000000..675b087198f
--- /dev/null
+++ b/arch/m68k/Kconfig.bus
@@ -0,0 +1,81 @@
+if MMU
+
+comment "Bus Support"
+
+config DIO
+	bool "DIO bus support"
+	depends on HP300
+	default y
+	help
+	  Say Y here to enable support for the "DIO" expansion bus used in
+	  HP300 machines. If you are using such a system you almost certainly
+	  want this.
+
+config NUBUS
+	bool
+	depends on MAC
+	default y
+
+config ZORRO
+	bool "Amiga Zorro (AutoConfig) bus support"
+	depends on AMIGA
+	help
+	  This enables support for the Zorro bus in the Amiga. If you have
+	  expansion cards in your Amiga that conform to the Amiga
+	  AutoConfig(tm) specification, say Y, otherwise N. Note that even
+	  expansion cards that do not fit in the Zorro slots but fit in e.g.
+	  the CPU slot may fall in this category, so you have to say Y to let
+	  Linux use these.
+
+config AMIGA_PCMCIA
+	bool "Amiga 1200/600 PCMCIA support"
+	depends on AMIGA
+	help
+	  Include support in the kernel for pcmcia on Amiga 1200 and Amiga
+	  600. If you intend to use pcmcia cards say Y; otherwise say N.
+
+config ISA
+	bool
+	depends on Q40 || AMIGA_PCMCIA
+	default y
+	help
+	  Find out whether you have ISA slots on your motherboard.  ISA is the
+	  name of a bus system, i.e. the way the CPU talks to the other stuff
+	  inside your box.  Other bus systems are PCI, EISA, MicroChannel
+	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
+	  newer boards don't support it.  If you have ISA, say Y, otherwise N.
+
+config ATARI_ROM_ISA
+	bool "Atari ROM port ISA adapter support"
+	depends on ATARI
+	help
+	  This option enables support for the ROM port ISA adapter used to
+	  operate ISA cards on Atari. Only 8  bit cards are supported, and
+	  no interrupt lines are connected.
+	  The only driver currently using this adapter is the EtherNEC
+	  driver for RTL8019AS based NE2000 compatible network cards.
+
+config GENERIC_ISA_DMA
+	def_bool ISA
+
+config PCI
+	bool "PCI support"
+	depends on M54xx
+	help
+	  Enable the PCI bus. Support for the PCI bus hardware built into the
+	  ColdFire 547x and 548x processors.
+
+source "drivers/pci/Kconfig"
+
+source "drivers/zorro/Kconfig"
+
+endif
+
+if !MMU
+
+config ISA_DMA_API
+        def_bool !M5272
+
+source "drivers/pcmcia/Kconfig"
+
+endif
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
new file mode 100644
index 00000000000..33013dfcd3e
--- /dev/null
+++ b/arch/m68k/Kconfig.cpu
@@ -0,0 +1,490 @@
+comment "Processor Type"
+
+choice
+	prompt "CPU family support"
+	default M68KCLASSIC if MMU
+	default COLDFIRE if !MMU
+	help
+	  The Freescale (was Motorola) M68K family of processors implements
+	  the full 68000 processor instruction set.
+	  The Freescale ColdFire family of processors is a modern derivative
+	  of the 68000 processor family. They are mainly targeted at embedded
+	  applications, and are all System-On-Chip (SOC) devices, as opposed
+	  to stand alone CPUs. They implement a subset of the original 68000
+	  processor instruction set.
+	  If you anticipate running this kernel on a computer with a classic
+	  MC68xxx processor, select M68KCLASSIC.
+	  If you anticipate running this kernel on a computer with a ColdFire
+	  processor, select COLDFIRE.
+
+config M68KCLASSIC
+	bool "Classic M68K CPU family support"
+
+config COLDFIRE
+	bool "Coldfire CPU family support"
+	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_HAVE_CUSTOM_GPIO_H
+	select CPU_HAS_NO_BITFIELDS
+	select CPU_HAS_NO_MULDIV64
+	select GENERIC_CSUM
+	select HAVE_CLK
+
+endchoice
+
+if M68KCLASSIC
+
+config M68000
+	bool "MC68000"
+	depends on !MMU
+	select CPU_HAS_NO_BITFIELDS
+	select CPU_HAS_NO_MULDIV64
+	select CPU_HAS_NO_UNALIGNED
+	select GENERIC_CSUM
+	help
+	  The Freescale (was Motorola) 68000 CPU is the first generation of
+	  the well known M68K family of processors. The CPU core as well as
+	  being available as a stand alone CPU was also used in many
+	  System-On-Chip devices (eg 68328, 68302, etc). It does not contain
+	  a paging MMU.
+
+config MCPU32
+	bool
+	select CPU_HAS_NO_BITFIELDS
+	select CPU_HAS_NO_UNALIGNED
+	help
+	  The Freescale (was then Motorola) CPU32 is a CPU core that is
+	  based on the 68020 processor. For the most part it is used in
+	  System-On-Chip parts, and does not contain a paging MMU.
+
+config M68020
+	bool "68020 support"
+	depends on MMU
+	select CPU_HAS_ADDRESS_SPACES
+	help
+	  If you anticipate running this kernel on a computer with a MC68020
+	  processor, say Y. Otherwise, say N. Note that the 68020 requires a
+	  68851 MMU (Memory Management Unit) to run Linux/m68k, except on the
+	  Sun 3, which provides its own version.
+
+config M68030
+	bool "68030 support"
+	depends on MMU && !MMU_SUN3
+	select CPU_HAS_ADDRESS_SPACES
+	help
+	  If you anticipate running this kernel on a computer with a MC68030
+	  processor, say Y. Otherwise, say N. Note that a MC68EC030 will not
+	  work, as it does not include an MMU (Memory Management Unit).
+
+config M68040
+	bool "68040 support"
+	depends on MMU && !MMU_SUN3
+	select CPU_HAS_ADDRESS_SPACES
+	help
+	  If you anticipate running this kernel on a computer with a MC68LC040
+	  or MC68040 processor, say Y. Otherwise, say N. Note that an
+	  MC68EC040 will not work, as it does not include an MMU (Memory
+	  Management Unit).
+
+config M68060
+	bool "68060 support"
+	depends on MMU && !MMU_SUN3
+	select CPU_HAS_ADDRESS_SPACES
+	help
+	  If you anticipate running this kernel on a computer with a MC68060
+	  processor, say Y. Otherwise, say N.
+
+config M68328
+	bool "MC68328"
+	depends on !MMU
+	select M68000
+	help
+	  Motorola 68328 processor support.
+
+config M68EZ328
+	bool "MC68EZ328"
+	depends on !MMU
+	select M68000
+	help
+	  Motorola 68EX328 processor support.
+
+config M68VZ328
+	bool "MC68VZ328"
+	depends on !MMU
+	select M68000
+	help
+	  Motorola 68VZ328 processor support.
+
+config M68360
+	bool "MC68360"
+	depends on !MMU
+	select MCPU32
+	help
+	  Motorola 68360 processor support.
+
+endif # M68KCLASSIC
+
+if COLDFIRE
+
+config M5206
+	bool "MCF5206"
+	depends on !MMU
+	select COLDFIRE_SW_A7
+	select HAVE_MBAR
+	help
+	  Motorola ColdFire 5206 processor support.
+
+config M5206e
+	bool "MCF5206e"
+	depends on !MMU
+	select COLDFIRE_SW_A7
+	select HAVE_MBAR
+	help
+	  Motorola ColdFire 5206e processor support.
+
+config M520x
+	bool "MCF520x"
+	depends on !MMU
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CACHE_SPLIT
+	help
+	   Freescale Coldfire 5207/5208 processor support.
+
+config M523x
+	bool "MCF523x"
+	depends on !MMU
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CACHE_SPLIT
+	select HAVE_IPSBAR
+	help
+	  Freescale Coldfire 5230/1/2/4/5 processor support
+
+config M5249
+	bool "MCF5249"
+	depends on !MMU
+	select COLDFIRE_SW_A7
+	select HAVE_MBAR
+	help
+	  Motorola ColdFire 5249 processor support.
+
+config M525x
+	bool "MCF525x"
+	depends on !MMU
+	select COLDFIRE_SW_A7
+	select HAVE_MBAR
+	help
+	  Freescale (Motorola) Coldfire 5251/5253 processor support.
+
+config M527x
+	bool
+
+config M5271
+	bool "MCF5271"
+	depends on !MMU
+	select M527x
+	select HAVE_CACHE_SPLIT
+	select HAVE_IPSBAR
+	select GENERIC_CLOCKEVENTS
+	help
+	  Freescale (Motorola) ColdFire 5270/5271 processor support.
+
+config M5272
+	bool "MCF5272"
+	depends on !MMU
+	select COLDFIRE_SW_A7
+	select HAVE_MBAR
+	help
+	  Motorola ColdFire 5272 processor support.
+
+config M5275
+	bool "MCF5275"
+	depends on !MMU
+	select M527x
+	select HAVE_CACHE_SPLIT
+	select HAVE_IPSBAR
+	select GENERIC_CLOCKEVENTS
+	help
+	  Freescale (Motorola) ColdFire 5274/5275 processor support.
+
+config M528x
+	bool "MCF528x"
+	depends on !MMU
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CACHE_SPLIT
+	select HAVE_IPSBAR
+	help
+	  Motorola ColdFire 5280/5282 processor support.
+
+config M5307
+	bool "MCF5307"
+	depends on !MMU
+	select COLDFIRE_SW_A7
+	select HAVE_CACHE_CB
+	select HAVE_MBAR
+	help
+	  Motorola ColdFire 5307 processor support.
+
+config M53xx
+	bool
+
+config M532x
+	bool "MCF532x"
+	depends on !MMU
+	select M53xx
+	select HAVE_CACHE_CB
+	help
+	  Freescale (Motorola) ColdFire 532x processor support.
+
+config M537x
+	bool "MCF537x"
+	depends on !MMU
+	select M53xx
+	select HAVE_CACHE_CB
+	help
+	  Freescale ColdFire 537x processor support.
+
+config M5407
+	bool "MCF5407"
+	depends on !MMU
+	select COLDFIRE_SW_A7
+	select HAVE_CACHE_CB
+	select HAVE_MBAR
+	help
+	  Motorola ColdFire 5407 processor support.
+
+config M54xx
+	bool
+
+config M547x
+	bool "MCF547x"
+	select M54xx
+	select MMU_COLDFIRE if MMU
+	select HAVE_CACHE_CB
+	select HAVE_MBAR
+	help
+	  Freescale ColdFire 5470/5471/5472/5473/5474/5475 processor support.
+
+config M548x
+	bool "MCF548x"
+	select MMU_COLDFIRE if MMU
+	select M54xx
+	select HAVE_CACHE_CB
+	select HAVE_MBAR
+	help
+	  Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support.
+
+config M5441x
+	bool "MCF5441x"
+	depends on !MMU
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CACHE_CB
+	help
+	  Freescale Coldfire 54410/54415/54416/54417/54418 processor support.
+
+endif # COLDFIRE
+
+
+comment "Processor Specific Options"
+
+config M68KFPU_EMU
+	bool "Math emulation support"
+	depends on MMU
+	help
+	  At some point in the future, this will cause floating-point math
+	  instructions to be emulated by the kernel on machines that lack a
+	  floating-point math coprocessor.  Thrill-seekers and chronically
+	  sleep-deprived psychotic hacker types can say Y now, everyone else
+	  should probably wait a while.
+
+config M68KFPU_EMU_EXTRAPREC
+	bool "Math emulation extra precision"
+	depends on M68KFPU_EMU
+	help
+	  The fpu uses normally a few bit more during calculations for
+	  correct rounding, the emulator can (often) do the same but this
+	  extra calculation can cost quite some time, so you can disable
+	  it here. The emulator will then "only" calculate with a 64 bit
+	  mantissa and round slightly incorrect, what is more than enough
+	  for normal usage.
+
+config M68KFPU_EMU_ONLY
+	bool "Math emulation only kernel"
+	depends on M68KFPU_EMU
+	help
+	  This option prevents any floating-point instructions from being
+	  compiled into the kernel, thereby the kernel doesn't save any
+	  floating point context anymore during task switches, so this
+	  kernel will only be usable on machines without a floating-point
+	  math coprocessor. This makes the kernel a bit faster as no tests
+	  needs to be executed whether a floating-point instruction in the
+	  kernel should be executed or not.
+
+config ADVANCED
+	bool "Advanced configuration options"
+	depends on MMU
+	---help---
+	  This gives you access to some advanced options for the CPU. The
+	  defaults should be fine for most users, but these options may make
+	  it possible for you to improve performance somewhat if you know what
+	  you are doing.
+
+	  Note that the answer to this question won't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about these options.
+
+	  Most users should say N to this question.
+
+config RMW_INSNS
+	bool "Use read-modify-write instructions"
+	depends on ADVANCED
+	---help---
+	  This allows to use certain instructions that work with indivisible
+	  read-modify-write bus cycles. While this is faster than the
+	  workaround of disabling interrupts, it can conflict with DMA
+	  ( = direct memory access) on many Amiga systems, and it is also said
+	  to destabilize other machines. It is very likely that this will
+	  cause serious problems on any Amiga or Atari Medusa if set. The only
+	  configuration where it should work are 68030-based Ataris, where it
+	  apparently improves performance. But you've been warned! Unless you
+	  really know what you are doing, say N. Try Y only if you're quite
+	  adventurous.
+
+config SINGLE_MEMORY_CHUNK
+	bool "Use one physical chunk of memory only" if ADVANCED && !SUN3
+	depends on MMU
+	default y if SUN3
+	select NEED_MULTIPLE_NODES
+	help
+	  Ignore all but the first contiguous chunk of physical memory for VM
+	  purposes.  This will save a few bytes kernel size and may speed up
+	  some operations.  Say N if not sure.
+
+config ARCH_DISCONTIGMEM_ENABLE
+	def_bool MMU && !SINGLE_MEMORY_CHUNK
+
+config 060_WRITETHROUGH
+	bool "Use write-through caching for 68060 supervisor accesses"
+	depends on ADVANCED && M68060
+	---help---
+	  The 68060 generally uses copyback caching of recently accessed data.
+	  Copyback caching means that memory writes will be held in an on-chip
+	  cache and only written back to memory some time later.  Saying Y
+	  here will force supervisor (kernel) accesses to use writethrough
+	  caching.  Writethrough caching means that data is written to memory
+	  straight away, so that cache and memory data always agree.
+	  Writethrough caching is less efficient, but is needed for some
+	  drivers on 68060 based systems where the 68060 bus snooping signal
+	  is hardwired on.  The 53c710 SCSI driver is known to suffer from
+	  this problem.
+
+config M68K_L2_CACHE
+	bool
+	depends on MAC
+	default y
+
+config NODES_SHIFT
+	int
+	default "3"
+	depends on !SINGLE_MEMORY_CHUNK
+
+config CPU_HAS_NO_BITFIELDS
+	bool
+
+config CPU_HAS_NO_MULDIV64
+	bool
+
+config CPU_HAS_NO_UNALIGNED
+	bool
+
+config CPU_HAS_ADDRESS_SPACES
+	bool
+
+config FPU
+	bool
+
+config COLDFIRE_SW_A7
+	bool
+
+config HAVE_CACHE_SPLIT
+	bool
+
+config HAVE_CACHE_CB
+	bool
+
+config HAVE_MBAR
+	bool
+
+config HAVE_IPSBAR
+	bool
+
+config CLOCK_SET
+	bool "Enable setting the CPU clock frequency"
+	depends on COLDFIRE
+	default n
+	help
+	  On some CPU's you do not need to know what the core CPU clock
+	  frequency is. On these you can disable clock setting. On some
+	  traditional 68K parts, and on all ColdFire parts you need to set
+	  the appropriate CPU clock frequency. On these devices many of the
+	  onboard peripherals derive their timing from the master CPU clock
+	  frequency.
+
+config CLOCK_FREQ
+	int "Set the core clock frequency"
+	default "66666666"
+	depends on CLOCK_SET
+	help
+	  Define the CPU clock frequency in use. This is the core clock
+	  frequency, it may or may not be the same as the external clock
+	  crystal fitted to your board. Some processors have an internal
+	  PLL and can have their frequency programmed at run time, others
+	  use internal dividers. In general the kernel won't setup a PLL
+	  if it is fitted (there are some exceptions). This value will be
+	  specific to the exact CPU that you are using.
+
+config OLDMASK
+	bool "Old mask 5307 (1H55J) silicon"
+	depends on M5307
+	help
+	  Build support for the older revision ColdFire 5307 silicon.
+	  Specifically this is the 1H55J mask revision.
+
+if HAVE_CACHE_SPLIT
+choice
+	prompt "Split Cache Configuration"
+	default CACHE_I
+
+config CACHE_I
+	bool "Instruction"
+	help
+	  Use all of the ColdFire CPU cache memory as an instruction cache.
+
+config CACHE_D
+	bool "Data"
+	help
+	  Use all of the ColdFire CPU cache memory as a data cache.
+
+config CACHE_BOTH
+	bool "Both"
+	help
+	  Split the ColdFire CPU cache, and use half as an instruction cache
+	  and half as a data cache.
+endchoice
+endif
+
+if HAVE_CACHE_CB
+choice
+	prompt "Data cache mode"
+	default CACHE_WRITETHRU
+
+config CACHE_WRITETHRU
+	bool "Write-through"
+	help
+	  The ColdFire CPU cache is set into Write-through mode.
+
+config CACHE_COPYBACK
+	bool "Copy-back"
+	help
+	  The ColdFire CPU cache is set into Copy-back mode.
+endchoice
+endif
+
diff --git a/arch/m68k/Kconfig.debug b/arch/m68k/Kconfig.debug
index f53b6d5300e..64776d7ac19 100644
--- a/arch/m68k/Kconfig.debug
+++ b/arch/m68k/Kconfig.debug
@@ -2,4 +2,53 @@ menu "Kernel hacking"
 
 source "lib/Kconfig.debug"
 
+config BOOTPARAM
+	bool 'Compiled-in Kernel Boot Parameter'
+
+config BOOTPARAM_STRING
+	string 'Kernel Boot Parameter'
+	default 'console=ttyS0,19200'
+	depends on BOOTPARAM
+
+config EARLY_PRINTK
+	bool "Early printk"
+	depends on !(SUN3 || M68360 || M68000 || COLDFIRE)
+	help
+          Write kernel log output directly to a serial port.
+          Where implemented, output goes to the framebuffer as well.
+          PROM console functionality on Sun 3x is not affected by this option.
+
+          Pass "earlyprintk" on the kernel command line to get a
+          boot console.
+
+          This is useful for kernel debugging when your machine crashes very
+          early, i.e. before the normal console driver is loaded.
+          You should normally say N here, unless you want to debug such a crash.
+
+if !MMU
+
+config FULLDEBUG
+	bool "Full Symbolic/Source Debugging support"
+	help
+	  Enable debugging symbols on kernel build.
+
+config HIGHPROFILE
+	bool "Use fast second timer for profiling"
+	depends on COLDFIRE
+	help
+	  Use a fast secondary clock to produce profiling information.
+
+config NO_KERNEL_MSG
+	bool "Suppress Kernel BUG Messages"
+	help
+	  Do not output any debug BUG messages within the kernel.
+
+config BDM_DISABLE
+	bool "Disable BDM signals"
+	depends on COLDFIRE
+	help
+	  Disable the ColdFire CPU's BDM signals.
+
+endif
+
 endmenu
diff --git a/arch/m68k/Kconfig.devices b/arch/m68k/Kconfig.devices
new file mode 100644
index 00000000000..d163991c571
--- /dev/null
+++ b/arch/m68k/Kconfig.devices
@@ -0,0 +1,144 @@
+if MMU
+
+config ARCH_MAY_HAVE_PC_FDC
+	bool
+	depends on BROKEN && (Q40 || SUN3X)
+	default y
+
+menu "Platform devices"
+
+config HEARTBEAT
+	bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || Q40
+	default y if !AMIGA && !APOLLO && !ATARI && !Q40 && HP300
+	help
+	  Use the power-on LED on your machine as a load meter.  The exact
+	  behavior is platform-dependent, but normally the flash frequency is
+	  a hyperbolic function of the 5-minute load average.
+
+# We have a dedicated heartbeat LED. :-)
+config PROC_HARDWARE
+	bool "/proc/hardware support"
+	help
+	  Say Y here to support the /proc/hardware file, which gives you
+	  access to information about the machine you're running on,
+	  including the model, CPU, MMU, clock speed, BogoMIPS rating,
+	  and memory size.
+
+config NATFEAT
+	bool "ARAnyM emulator support"
+	depends on ATARI
+	help
+	  This option enables support for ARAnyM native features, such as
+	  access to a disk image as /dev/hda.
+
+config NFBLOCK
+	tristate "NatFeat block device support"
+	depends on BLOCK && NATFEAT
+	help
+	  Say Y to include support for the ARAnyM NatFeat block device
+	  which allows direct access to the hard drives without using
+	  the hardware emulation.
+
+config NFCON
+	tristate "NatFeat console driver"
+	depends on TTY && NATFEAT
+	help
+	  Say Y to include support for the ARAnyM NatFeat console driver
+	  which allows the console output to be redirected to the stderr
+	  output of ARAnyM.
+
+config NFETH
+	tristate "NatFeat Ethernet support"
+	depends on ETHERNET && NATFEAT
+	help
+	  Say Y to include support for the ARAnyM NatFeat network device
+	  which will emulate a regular ethernet device while presenting an
+	  ethertap device to the host system.
+
+config ATARI_ETHERNAT
+	bool "Atari EtherNAT Ethernet support"
+	depends on ATARI
+	---help---
+	  Say Y to include support for the EtherNAT network adapter for the
+	  CT/60 extension port.
+
+	  To compile the actual ethernet driver, choose Y or M for the SMC91X
+	  option in the network device section; the module will be called smc91x.
+
+config ATARI_ETHERNEC
+	bool "Atari EtherNEC Ethernet support"
+	depends on ATARI_ROM_ISA
+	---help---
+	  Say Y to include support for the EtherNEC network adapter for the
+	  ROM port. The driver works by polling instead of interrupts, so it
+	  is quite slow.
+
+	  This driver also suppports the ethernet part of the NetUSBee ROM
+	  port combined Ethernet/USB adapter.
+
+	  To compile the actual ethernet driver, choose Y or M in for the NE2000
+	  option in the network device section; the module will be called ne.
+
+endmenu
+
+menu "Character devices"
+
+config ATARI_DSP56K
+	tristate "Atari DSP56k support"
+	depends on ATARI
+	help
+	  If you want to be able to use the DSP56001 in Falcons, say Y. This
+	  driver is still experimental, and if you don't know what it is, or
+	  if you don't have this processor, just say N.
+
+	  To compile this driver as a module, choose M here.
+
+config AMIGA_BUILTIN_SERIAL
+	tristate "Amiga builtin serial support"
+	depends on AMIGA
+	help
+	  If you want to use your Amiga's built-in serial port in Linux,
+	  answer Y.
+
+	  To compile this driver as a module, choose M here.
+
+config HPDCA
+	tristate "HP DCA serial support"
+	depends on DIO && SERIAL_8250
+	help
+	  If you want to use the internal "DCA" serial ports on an HP300
+	  machine, say Y here.
+
+config HPAPCI
+	tristate "HP APCI serial support"
+	depends on HP300 && SERIAL_8250
+	help
+	  If you want to use the internal "APCI" serial ports on an HP400
+	  machine, say Y here.
+
+config SERIAL_CONSOLE
+	bool "Support for serial port console"
+	depends on AMIGA_BUILTIN_SERIAL=y
+	---help---
+	  If you say Y here, it will be possible to use a serial port as the
+	  system console (the system console is the device which receives all
+	  kernel messages and warnings and which allows logins in single user
+	  mode). This could be useful if some terminal or printer is connected
+	  to that serial port.
+
+	  Even if you say Y here, the currently visible virtual console
+	  (/dev/tty0) will still be used as the system console by default, but
+	  you can alter that using a kernel command line option such as
+	  "console=ttyS1". (Try "man bootparam" or see the documentation of
+	  your boot loader about how to pass options to the kernel at boot
+	  time.)
+
+	  If you don't have a graphical console and you say Y here, the
+	  kernel will automatically use the first serial line, /dev/ttyS0, as
+	  system console.
+
+	  If unsure, say N.
+
+endmenu
+
+endif
diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine
new file mode 100644
index 00000000000..61dc643c0b0
--- /dev/null
+++ b/arch/m68k/Kconfig.machine
@@ -0,0 +1,450 @@
+comment "Machine Types"
+
+if M68KCLASSIC
+
+config AMIGA
+	bool "Amiga support"
+	depends on MMU
+	select MMU_MOTOROLA if MMU
+	help
+	  This option enables support for the Amiga series of computers. If
+	  you plan to use this kernel on an Amiga, say Y here and browse the
+	  material available in <file:Documentation/m68k>; otherwise say N.
+
+config ATARI
+	bool "Atari support"
+	depends on MMU
+	select MMU_MOTOROLA if MMU
+	help
+	  This option enables support for the 68000-based Atari series of
+	  computers (including the TT, Falcon and Medusa). If you plan to use
+	  this kernel on an Atari, say Y here and browse the material
+	  available in <file:Documentation/m68k>; otherwise say N.
+
+config MAC
+	bool "Macintosh support"
+	depends on MMU
+	select MMU_MOTOROLA if MMU
+	help
+	  This option enables support for the Apple Macintosh series of
+	  computers (yes, there is experimental support now, at least for part
+	  of the series).
+
+	  Say N unless you're willing to code the remaining necessary support.
+	  ;)
+
+config APOLLO
+	bool "Apollo support"
+	depends on MMU
+	select MMU_MOTOROLA if MMU
+	help
+	  Say Y here if you want to run Linux on an MC680x0-based Apollo
+	  Domain workstation such as the DN3500.
+
+config VME
+	bool "VME (Motorola and BVM) support"
+	depends on MMU
+	select MMU_MOTOROLA if MMU
+	help
+	  Say Y here if you want to build a kernel for a 680x0 based VME
+	  board.  Boards currently supported include Motorola boards MVME147,
+	  MVME162, MVME166, MVME167, MVME172, and MVME177.  BVME4000 and
+	  BVME6000 boards from BVM Ltd are also supported.
+
+config MVME147
+	bool "MVME147 support"
+	depends on MMU
+	depends on VME
+	help
+	  Say Y to include support for early Motorola VME boards.  This will
+	  build a kernel which can run on MVME147 single-board computers.  If
+	  you select this option you will have to select the appropriate
+	  drivers for SCSI, Ethernet and serial ports later on.
+
+config MVME16x
+	bool "MVME162, 166 and 167 support"
+	depends on MMU
+	depends on VME
+	help
+	  Say Y to include support for Motorola VME boards.  This will build a
+	  kernel which can run on MVME162, MVME166, MVME167, MVME172, and
+	  MVME177 boards.  If you select this option you will have to select
+	  the appropriate drivers for SCSI, Ethernet and serial ports later
+	  on.
+
+config BVME6000
+	bool "BVME4000 and BVME6000 support"
+	depends on MMU
+	depends on VME
+	help
+	  Say Y to include support for VME boards from BVM Ltd.  This will
+	  build a kernel which can run on BVME4000 and BVME6000 boards.  If
+	  you select this option you will have to select the appropriate
+	  drivers for SCSI, Ethernet and serial ports later on.
+
+config HP300
+	bool "HP9000/300 and HP9000/400 support"
+	depends on MMU
+	select MMU_MOTOROLA if MMU
+	help
+	  This option enables support for the HP9000/300 and HP9000/400 series
+	  of workstations. Support for these machines is still somewhat
+	  experimental. If you plan to try to use the kernel on such a machine
+	  say Y here.
+	  Everybody else says N.
+
+config SUN3X
+	bool "Sun3x support"
+	depends on MMU
+	select MMU_MOTOROLA if MMU
+	select M68030
+	help
+	  This option enables support for the Sun 3x series of workstations.
+	  Be warned that this support is very experimental.
+	  Note that Sun 3x kernels are not compatible with Sun 3 hardware.
+	  General Linux information on the Sun 3x series (now discontinued)
+	  is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
+
+	  If you don't want to compile a kernel for a Sun 3x, say N.
+
+config Q40
+	bool "Q40/Q60 support"
+	depends on MMU
+	select MMU_MOTOROLA if MMU
+	help
+	  The Q40 is a Motorola 68040-based successor to the Sinclair QL
+	  manufactured in Germany.  There is an official Q40 home page at
+	  <http://www.q40.de/>.  This option enables support for the Q40 and
+	  Q60. Select your CPU below.  For 68LC060 don't forget to enable FPU
+	  emulation.
+
+config SUN3
+	bool "Sun3 support"
+	depends on MMU
+	depends on !MMU_MOTOROLA
+	select MMU_SUN3 if MMU
+	select M68020
+	help
+	  This option enables support for the Sun 3 series of workstations
+	  (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires
+	  that all other hardware types must be disabled, as Sun 3 kernels
+	  are incompatible with all other m68k targets (including Sun 3x!).
+
+	  If you don't want to compile a kernel exclusively for a Sun 3, say N.
+
+endif # M68KCLASSIC
+
+config PILOT
+	bool
+
+config PILOT3
+	bool "Pilot 1000/5000, PalmPilot Personal/Pro, or PalmIII support"
+	depends on M68328
+	select PILOT
+	help
+	  Support for the Palm Pilot 1000/5000, Personal/Pro and PalmIII.
+
+config XCOPILOT_BUGS
+	bool "(X)Copilot support"
+	depends on PILOT3
+	help
+	  Support the bugs of Xcopilot.
+
+config UCSIMM
+	bool "uCsimm module support"
+	depends on M68EZ328
+	help
+	  Support for the Arcturus Networks uCsimm module.
+
+config UCDIMM
+	bool "uDsimm module support"
+	depends on M68VZ328
+	help
+	  Support for the Arcturus Networks uDsimm module.
+
+config DRAGEN2
+	bool "DragenEngine II board support"
+	depends on M68VZ328
+	help
+	  Support for the DragenEngine II board.
+
+config DIRECT_IO_ACCESS
+	bool "Allow user to access IO directly"
+	depends on (UCSIMM || UCDIMM || DRAGEN2)
+	help
+	  Disable the CPU internal registers protection in user mode,
+	  to allow a user application to read/write them.
+
+config INIT_LCD
+	bool "Initialize LCD"
+	depends on (UCSIMM || UCDIMM || DRAGEN2)
+	help
+	  Initialize the LCD controller of the 68x328 processor.
+
+config MEMORY_RESERVE
+	int "Memory reservation (MiB)"
+	depends on (UCSIMM || UCDIMM)
+	help
+	  Reserve certain memory regions on 68x328 based boards.
+
+config UCQUICC
+	bool "Lineo uCquicc board support"
+	depends on M68360
+	help
+	  Support for the Lineo uCquicc board.
+
+config ARN5206
+	bool "Arnewsh 5206 board support"
+	depends on M5206
+	help
+	  Support for the Arnewsh 5206 board.
+
+config M5206eC3
+	bool "Motorola M5206eC3 board support"
+	depends on M5206e
+	help
+	  Support for the Motorola M5206eC3 board.
+
+config ELITE
+	bool "Motorola M5206eLITE board support"
+	depends on M5206e
+	help
+	  Support for the Motorola M5206eLITE board.
+
+config M5235EVB
+	bool "Freescale M5235EVB support"
+	depends on M523x
+	help
+	  Support for the Freescale M5235EVB board.
+
+config M5249C3
+	bool "Motorola M5249C3 board support"
+	depends on M5249
+	help
+	  Support for the Motorola M5249C3 board.
+
+config M5272C3
+	bool "Motorola M5272C3 board support"
+	depends on M5272
+	help
+	  Support for the Motorola M5272C3 board.
+
+config WILDFIRE
+	bool "Intec Automation Inc. WildFire board support"
+	depends on M528x
+	help
+	  Support for the Intec Automation Inc. WildFire.
+
+config WILDFIREMOD
+	bool "Intec Automation Inc. WildFire module support"
+	depends on M528x
+	help
+	  Support for the Intec Automation Inc. WildFire module.
+
+config ARN5307
+	bool "Arnewsh 5307 board support"
+	depends on M5307
+	help
+	  Support for the Arnewsh 5307 board.
+
+config M5307C3
+	bool "Motorola M5307C3 board support"
+	depends on M5307
+	help
+	  Support for the Motorola M5307C3 board.
+
+config SECUREEDGEMP3
+	bool "SnapGear SecureEdge/MP3 platform support"
+	depends on M5307
+	help
+	  Support for the SnapGear SecureEdge/MP3 platform.
+
+config M5407C3
+	bool "Motorola M5407C3 board support"
+	depends on M5407
+	help
+	  Support for the Motorola M5407C3 board.
+
+config FIREBEE
+	bool "FireBee board support"
+	depends on M547x
+	help
+	  Support for the FireBee ColdFire 5475 based board.
+
+config CLEOPATRA
+	bool "Feith CLEOPATRA board support"
+	depends on (M5307 || M5407)
+	help
+	  Support for the Feith Cleopatra boards.
+
+config CANCam
+	bool "Feith CANCam board support"
+	depends on M5272
+	help
+	  Support for the Feith CANCam board.
+
+config SCALES
+	bool "Feith SCALES board support"
+	depends on M5272
+	help
+	  Support for the Feith SCALES board.
+
+config NETtel
+	bool "SecureEdge/NETtel board support"
+	depends on (M5206e || M5272 || M5307)
+	help
+	  Support for the SnapGear NETtel/SecureEdge/SnapGear boards.
+
+config MOD5272
+	bool "Netburner MOD-5272 board support"
+	depends on M5272
+	help
+	  Support for the Netburner MOD-5272 board.
+
+if !MMU || COLDFIRE
+
+comment "Machine Options"
+
+config UBOOT
+	bool "Support for U-Boot command line parameters"
+	help
+	  If you say Y here kernel will try to collect command
+	  line parameters from the initial u-boot stack.
+	default n
+
+config 4KSTACKS
+	bool "Use 4Kb for kernel stacks instead of 8Kb"
+	default y
+	help
+	  If you say Y here the kernel will use a 4Kb stacksize for the
+	  kernel stack attached to each process/thread. This facilitates
+	  running more threads on a system and also reduces the pressure
+	  on the VM subsystem for higher order allocations.
+
+comment "RAM configuration"
+
+config RAMBASE
+	hex "Address of the base of RAM"
+	default "0"
+	help
+	  Define the address that RAM starts at. On many platforms this is
+	  0, the base of the address space. And this is the default. Some
+	  platforms choose to setup their RAM at other addresses within the
+	  processor address space.
+
+config RAMSIZE
+	hex "Size of RAM (in bytes), or 0 for automatic"
+	default "0x400000"
+	help
+	  Define the size of the system RAM. If you select 0 then the
+	  kernel will try to probe the RAM size at runtime. This is not
+	  supported on all CPU types.
+
+config VECTORBASE
+	hex "Address of the base of system vectors"
+	default "0"
+	help
+	  Define the address of the system vectors. Commonly this is
+	  put at the start of RAM, but it doesn't have to be. On ColdFire
+	  platforms this address is programmed into the VBR register, thus
+	  actually setting the address to use.
+
+config MBAR
+	hex "Address of the MBAR (internal peripherals)"
+	default "0x10000000"
+	depends on HAVE_MBAR
+	help
+	  Define the address of the internal system peripherals. This value
+	  is set in the processors MBAR register. This is generally setup by
+	  the boot loader, and will not be written by the kernel. By far most
+	  ColdFire boards use the default 0x10000000 value, so if unsure then
+	  use this.
+
+config IPSBAR
+	hex "Address of the IPSBAR (internal peripherals)"
+	default "0x40000000"
+	depends on HAVE_IPSBAR
+	help
+	  Define the address of the internal system peripherals. This value
+	  is set in the processors IPSBAR register. This is generally setup by
+	  the boot loader, and will not be written by the kernel. By far most
+	  ColdFire boards use the default 0x40000000 value, so if unsure then
+	  use this.
+
+config KERNELBASE
+	hex "Address of the base of kernel code"
+	default "0x400"
+	help
+	  Typically on m68k systems the kernel will not start at the base
+	  of RAM, but usually some small offset from it. Define the start
+	  address of the kernel here. The most common setup will have the
+	  processor vectors at the base of RAM and then the start of the
+	  kernel. On some platforms some RAM is reserved for boot loaders
+	  and the kernel starts after that. The 0x400 default was based on
+	  a system with the RAM based at address 0, and leaving enough room
+	  for the theoretical maximum number of 256 vectors.
+
+comment "ROM configuration"
+
+config ROM
+	bool "Specify ROM linker regions"
+	default n
+	help
+	  Define a ROM region for the linker script. This creates a kernel
+	  that can be stored in flash, with possibly the text, and data
+	  regions being copied out to RAM at startup.
+
+config ROMBASE
+	hex "Address of the base of ROM device"
+	default "0"
+	depends on ROM
+	help
+	  Define the address that the ROM region starts at. Some platforms
+	  use this to set their chip select region accordingly for the boot
+	  device.
+
+config ROMVEC
+	hex "Address of the base of the ROM vectors"
+	default "0"
+	depends on ROM
+	help
+	  This is almost always the same as the base of the ROM. Since on all
+	  68000 type variants the vectors are at the base of the boot device
+	  on system startup.
+
+config ROMSTART
+	hex "Address of the base of system image in ROM"
+	default "0x400"
+	depends on ROM
+	help
+	  Define the start address of the system image in ROM. Commonly this
+	  is strait after the ROM vectors.
+
+config ROMSIZE
+	hex "Size of the ROM device"
+	default "0x100000"
+	depends on ROM
+	help
+	  Size of the ROM device. On some platforms this is used to setup
+	  the chip select that controls the boot ROM device.
+
+choice
+	prompt "Kernel executes from"
+	---help---
+	  Choose the memory type that the kernel will be running in.
+
+config RAMKERNEL
+	bool "RAM"
+	help
+	  The kernel will be resident in RAM when running.
+
+config ROMKERNEL
+	bool "ROM"
+	help
+	  The kernel will be resident in FLASH/ROM when running. This is
+	  often referred to as Execute-in-Place (XIP), since the kernel
+	  code executes from the position it is stored in the FLASH/ROM.
+
+endchoice
+
+endif
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
index 34d826d10f1..7f7830f2c5b 100644
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -11,54 +11,90 @@
 # for more details.
 #
 # Copyright (C) 1994 by Hamish Macdonald
+# Copyright (C) 2002,2011 Greg Ungerer <gerg@snapgear.com>
 #
 
-# test for cross compiling
-COMPILE_ARCH = $(shell uname -m)
+KBUILD_DEFCONFIG := multi_defconfig
 
-# override top level makefile
-AS += -m68020
-LDFLAGS := -m m68kelf
-ifneq ($(COMPILE_ARCH),$(ARCH))
-	# prefix for cross-compiling binaries
-	CROSS_COMPILE = m68k-linux-
+ifneq ($(SUBARCH),$(ARCH))
+	ifeq ($(CROSS_COMPILE),)
+		CROSS_COMPILE := $(call cc-cross-prefix, \
+			m68k-linux-gnu- m68k-linux- m68k-unknown-linux-gnu-)
+	endif
 endif
 
-ifdef CONFIG_SUN3
-LDFLAGS_vmlinux = -N
+#
+#	Enable processor type. Ordering of these is important - we want to
+#	use the minimum processor type of the range we support. The logic
+#	for 680x0 will only allow use of the -m68060 or -m68040 if no other
+#	680x0 type is specified - and no option is specified for 68030 or
+#	68020. The other m68k/ColdFire types always specify some type of
+#	compiler cpu type flag.
+#
+ifndef CONFIG_M68040
+cpuflags-$(CONFIG_M68060)	:= -m68060
 endif
-
-CHECKFLAGS += -D__mc68000__
-
+ifndef CONFIG_M68060
+cpuflags-$(CONFIG_M68040)	:= -m68040
+endif
+cpuflags-$(CONFIG_M68030)	:=
+cpuflags-$(CONFIG_M68020)	:=
+cpuflags-$(CONFIG_M68360)	:= -m68332
+cpuflags-$(CONFIG_M68000)	:= -m68000
+cpuflags-$(CONFIG_M5441x)	:= $(call cc-option,-mcpu=54455,-mcfv4e)
+cpuflags-$(CONFIG_M54xx)	:= $(call cc-option,-mcpu=5475,-m5200)
+cpuflags-$(CONFIG_M5407)	:= $(call cc-option,-mcpu=5407,-m5200)
+cpuflags-$(CONFIG_M532x)	:= $(call cc-option,-mcpu=532x,-m5307)
+cpuflags-$(CONFIG_M537x)	:= $(call cc-option,-mcpu=537x,-m5307)
+cpuflags-$(CONFIG_M5307)	:= $(call cc-option,-mcpu=5307,-m5200)
+cpuflags-$(CONFIG_M528x)	:= $(call cc-option,-mcpu=528x,-m5307)
+cpuflags-$(CONFIG_M5275)	:= $(call cc-option,-mcpu=5275,-m5307)
+cpuflags-$(CONFIG_M5272)	:= $(call cc-option,-mcpu=5272,-m5307)
+cpuflags-$(CONFIG_M5271)	:= $(call cc-option,-mcpu=5271,-m5307)
+cpuflags-$(CONFIG_M523x)	:= $(call cc-option,-mcpu=523x,-m5307)
+cpuflags-$(CONFIG_M525x)	:= $(call cc-option,-mcpu=5253,-m5200)
+cpuflags-$(CONFIG_M5249)	:= $(call cc-option,-mcpu=5249,-m5200)
+cpuflags-$(CONFIG_M520x)	:= $(call cc-option,-mcpu=5208,-m5200)
+cpuflags-$(CONFIG_M5206e)	:= $(call cc-option,-mcpu=5206e,-m5200)
+cpuflags-$(CONFIG_M5206)	:= $(call cc-option,-mcpu=5206,-m5200)
+
+KBUILD_AFLAGS += $(cpuflags-y)
+KBUILD_CFLAGS += $(cpuflags-y) -pipe
+ifdef CONFIG_MMU
 # without -fno-strength-reduce the 53c7xx.c driver fails ;-(
-CFLAGS += -pipe -fno-strength-reduce -ffixed-a2
+KBUILD_CFLAGS += -fno-strength-reduce -ffixed-a2
+else
+# we can use a m68k-linux-gcc toolchain with these in place
+KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\"
+KBUILD_CFLAGS += -D__uClinux__
+KBUILD_AFLAGS += -D__uClinux__
+endif
 
-# enable processor switch if compiled only for a single cpu
-ifndef CONFIG_M68020
-ifndef CONFIG_M68030
+LDFLAGS := -m m68kelf
+KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/m68k/kernel/module.lds
 
-ifndef CONFIG_M68060
-CFLAGS := $(CFLAGS) -m68040
+ifdef CONFIG_SUN3
+LDFLAGS_vmlinux = -N
 endif
 
-ifndef CONFIG_M68040
-CFLAGS := $(CFLAGS) -m68060
-endif
+CHECKFLAGS += -D__mc68000__
 
-endif
-endif
 
 ifdef CONFIG_KGDB
 # If configured for kgdb support, include debugging infos and keep the
 # frame pointer
-CFLAGS := $(subst -fomit-frame-pointer,,$(CFLAGS)) -g
+KBUILD_CFLAGS := $(subst -fomit-frame-pointer,,$(KBUILD_CFLAGS)) -g
 endif
 
-ifndef CONFIG_SUN3
-head-y := arch/m68k/kernel/head.o
-else
-head-y := arch/m68k/kernel/sun3-head.o
-endif
+#
+# Select the assembler head startup code. Order is important. The default
+# head code is first, processor specific selections can override it after.
+#
+head-y				:= arch/m68k/kernel/head.o
+head-$(CONFIG_SUN3)		:= arch/m68k/kernel/sun3-head.o
+head-$(CONFIG_M68360)		:= arch/m68k/platform/68360/head.o
+head-$(CONFIG_M68000)		:= arch/m68k/platform/68000/head.o
+head-$(CONFIG_COLDFIRE)		:= arch/m68k/platform/coldfire/head.o
 
 core-y				+= arch/m68k/kernel/	arch/m68k/mm/
 libs-y				+= arch/m68k/lib/
@@ -74,9 +110,14 @@ core-$(CONFIG_MVME16x)		+= arch/m68k/mvme16x/
 core-$(CONFIG_BVME6000)		+= arch/m68k/bvme6000/
 core-$(CONFIG_SUN3X)		+= arch/m68k/sun3x/	arch/m68k/sun3/
 core-$(CONFIG_SUN3)		+= arch/m68k/sun3/	arch/m68k/sun3/prom/
+core-$(CONFIG_NATFEAT)		+= arch/m68k/emu/
 core-$(CONFIG_M68040)		+= arch/m68k/fpsp040/
 core-$(CONFIG_M68060)		+= arch/m68k/ifpsp060/
 core-$(CONFIG_M68KFPU_EMU)	+= arch/m68k/math-emu/
+core-$(CONFIG_M68360)		+= arch/m68k/platform/68360/
+core-$(CONFIG_M68000)		+= arch/m68k/platform/68000/
+core-$(CONFIG_COLDFIRE)		+= arch/m68k/platform/coldfire/
+
 
 all:	zImage
 
@@ -115,3 +156,6 @@ endif
 
 archclean:
 	rm -f vmlinux.gz vmlinux.bz2
+
+install:
+	sh $(srctree)/arch/m68k/install.sh $(KERNELRELEASE) vmlinux.gz System.map "$(INSTALL_PATH)"
diff --git a/arch/m68k/amiga/Makefile b/arch/m68k/amiga/Makefile
index 8b415651ede..11dd30b16b3 100644
--- a/arch/m68k/amiga/Makefile
+++ b/arch/m68k/amiga/Makefile
@@ -2,6 +2,6 @@
 # Makefile for Linux arch/m68k/amiga source directory
 #
 
-obj-y		:= config.o amiints.o cia.o chipram.o amisound.o amiga_ksyms.o
+obj-y		:= config.o amiints.o cia.o chipram.o amisound.o platform.o
 
 obj-$(CONFIG_AMIGA_PCMCIA)	+= pcmcia.o
diff --git a/arch/m68k/amiga/amiga_ksyms.c b/arch/m68k/amiga/amiga_ksyms.c
deleted file mode 100644
index b7bd84c73ea..00000000000
--- a/arch/m68k/amiga/amiga_ksyms.c
+++ /dev/null
@@ -1,36 +0,0 @@
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <asm/ptrace.h>
-#include <asm/amigahw.h>
-#include <asm/amigaints.h>
-#include <asm/amipcmcia.h>
-
-extern volatile u_short amiga_audio_min_period;
-extern u_short amiga_audio_period;
-
-/*
- * Add things here when you find the need for it.
- */
-EXPORT_SYMBOL(amiga_model);
-EXPORT_SYMBOL(amiga_chipset);
-EXPORT_SYMBOL(amiga_hw_present);
-EXPORT_SYMBOL(amiga_eclock);
-EXPORT_SYMBOL(amiga_colorclock);
-EXPORT_SYMBOL(amiga_chip_alloc);
-EXPORT_SYMBOL(amiga_chip_free);
-EXPORT_SYMBOL(amiga_chip_avail);
-EXPORT_SYMBOL(amiga_chip_size);
-EXPORT_SYMBOL(amiga_audio_period);
-EXPORT_SYMBOL(amiga_audio_min_period);
-EXPORT_SYMBOL(amiga_do_irq);
-EXPORT_SYMBOL(amiga_do_irq_list);
-
-#ifdef CONFIG_AMIGA_PCMCIA
-  EXPORT_SYMBOL(pcmcia_reset);
-  EXPORT_SYMBOL(pcmcia_copy_tuple);
-  EXPORT_SYMBOL(pcmcia_program_voltage);
-  EXPORT_SYMBOL(pcmcia_access_speed);
-  EXPORT_SYMBOL(pcmcia_write_enable);
-  EXPORT_SYMBOL(pcmcia_write_disable);
-#endif
diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c
index b0aa61bf870..47b5f90002a 100644
--- a/arch/m68k/amiga/amiints.c
+++ b/arch/m68k/amiga/amiints.c
@@ -1,520 +1,174 @@
 /*
- * linux/arch/m68k/amiga/amiints.c -- Amiga Linux interrupt handling code
+ * Amiga Linux interrupt handling code
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file COPYING in the main directory of this archive
  * for more details.
- *
- * 11/07/96: rewritten interrupt handling, irq lists are exists now only for
- *           this sources where it makes sense (VERTB/PORTS/EXTER) and you must
- *           be careful that dev_id for this sources is unique since this the
- *           only possibility to distinguish between different handlers for
- *           free_irq. irq lists also have different irq flags:
- *           - IRQ_FLG_FAST: handler is inserted at top of list (after other
- *                           fast handlers)
- *           - IRQ_FLG_SLOW: handler is inserted at bottom of list and before
- *                           they're executed irq level is set to the previous
- *                           one, but handlers don't need to be reentrant, if
- *                           reentrance occurred, slow handlers will be just
- *                           called again.
- *           The whole interrupt handling for CIAs is moved to cia.c
- *           /Roman Zippel
- *
- * 07/08/99: rewamp of the interrupt handling - we now have two types of
- *           interrupts, normal and fast handlers, fast handlers being
- *           marked with SA_INTERRUPT and runs with all other interrupts
- *           disabled. Normal interrupts disable their own source but
- *           run with all other interrupt sources enabled.
- *           PORTS and EXTER interrupts are always shared even if the
- *           drivers do not explicitly mark this when calling
- *           request_irq which they really should do.
- *           This is similar to the way interrupts are handled on all
- *           other architectures and makes a ton of sense besides
- *           having the advantage of making it easier to share
- *           drivers.
- *           /Jes
  */
 
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/kernel_stat.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/errno.h>
-#include <linux/seq_file.h>
+#include <linux/irq.h>
 
-#include <asm/system.h>
 #include <asm/irq.h>
 #include <asm/traps.h>
 #include <asm/amigahw.h>
 #include <asm/amigaints.h>
 #include <asm/amipcmcia.h>
 
-extern int cia_request_irq(struct ciabase *base,int irq,
-                           irqreturn_t (*handler)(int, void *, struct pt_regs *),
-                           unsigned long flags, const char *devname, void *dev_id);
-extern void cia_free_irq(struct ciabase *base, unsigned int irq, void *dev_id);
-extern void cia_init_IRQ(struct ciabase *base);
-extern int cia_get_irq_list(struct ciabase *base, struct seq_file *p);
-
-/* irq node variables for amiga interrupt sources */
-static irq_node_t *ami_irq_list[AMI_STD_IRQS];
-
-static unsigned short amiga_intena_vals[AMI_STD_IRQS] = {
-	[IRQ_AMIGA_VERTB]	= IF_VERTB,
-	[IRQ_AMIGA_COPPER]	= IF_COPER,
-	[IRQ_AMIGA_AUD0]	= IF_AUD0,
-	[IRQ_AMIGA_AUD1]	= IF_AUD1,
-	[IRQ_AMIGA_AUD2]	= IF_AUD2,
-	[IRQ_AMIGA_AUD3]	= IF_AUD3,
-	[IRQ_AMIGA_BLIT]	= IF_BLIT,
-	[IRQ_AMIGA_DSKSYN]	= IF_DSKSYN,
-	[IRQ_AMIGA_DSKBLK]	= IF_DSKBLK,
-	[IRQ_AMIGA_RBF]		= IF_RBF,
-	[IRQ_AMIGA_TBE]		= IF_TBE,
-	[IRQ_AMIGA_SOFT]	= IF_SOFT,
-	[IRQ_AMIGA_PORTS]	= IF_PORTS,
-	[IRQ_AMIGA_EXTER]	= IF_EXTER
-};
-static const unsigned char ami_servers[AMI_STD_IRQS] = {
-	[IRQ_AMIGA_VERTB]	= 1,
-	[IRQ_AMIGA_PORTS]	= 1,
-	[IRQ_AMIGA_EXTER]	= 1
-};
-
-static short ami_ablecount[AMI_IRQS];
-
-static irqreturn_t ami_badint(int irq, void *dev_id, struct pt_regs *fp)
-{
-	num_spurious += 1;
-	return IRQ_NONE;
-}
-
-/*
- * void amiga_init_IRQ(void)
- *
- * Parameters:	None
- *
- * Returns:	Nothing
- *
- * This function should be called during kernel startup to initialize
- * the amiga IRQ handling routines.
- */
-
-void __init amiga_init_IRQ(void)
-{
-	int i;
-
-	/* initialize handlers */
-	for (i = 0; i < AMI_STD_IRQS; i++) {
-		if (ami_servers[i]) {
-			ami_irq_list[i] = NULL;
-		} else {
-			ami_irq_list[i] = new_irq_node();
-			ami_irq_list[i]->handler = ami_badint;
-			ami_irq_list[i]->flags   = 0;
-			ami_irq_list[i]->dev_id  = NULL;
-			ami_irq_list[i]->devname = NULL;
-			ami_irq_list[i]->next    = NULL;
-		}
-	}
-	for (i = 0; i < AMI_IRQS; i++)
-		ami_ablecount[i] = 0;
-
-	/* turn off PCMCIA interrupts */
-	if (AMIGAHW_PRESENT(PCMCIA))
-		gayle.inten = GAYLE_IRQ_IDE;
-
-	/* turn off all interrupts and enable the master interrupt bit */
-	amiga_custom.intena = 0x7fff;
-	amiga_custom.intreq = 0x7fff;
-	amiga_custom.intena = IF_SETCLR | IF_INTEN;
-
-	cia_init_IRQ(&ciaa_base);
-	cia_init_IRQ(&ciab_base);
-}
-
-static inline int amiga_insert_irq(irq_node_t **list, irq_node_t *node)
-{
-	unsigned long flags;
-	irq_node_t *cur;
-
-	if (!node->dev_id)
-		printk("%s: Warning: dev_id of %s is zero\n",
-		       __FUNCTION__, node->devname);
-
-	local_irq_save(flags);
-
-	cur = *list;
-
-	if (node->flags & SA_INTERRUPT) {
-		if (node->flags & SA_SHIRQ)
-			return -EBUSY;
-		/*
-		 * There should never be more than one
-		 */
-		while (cur && cur->flags & SA_INTERRUPT) {
-			list = &cur->next;
-			cur = cur->next;
-		}
-	} else {
-		while (cur) {
-			list = &cur->next;
-			cur = cur->next;
-		}
-	}
-
-	node->next = cur;
-	*list = node;
-
-	local_irq_restore(flags);
-	return 0;
-}
-
-static inline void amiga_delete_irq(irq_node_t **list, void *dev_id)
-{
-	unsigned long flags;
-	irq_node_t *node;
-
-	local_irq_save(flags);
-
-	for (node = *list; node; list = &node->next, node = *list) {
-		if (node->dev_id == dev_id) {
-			*list = node->next;
-			/* Mark it as free. */
-			node->handler = NULL;
-			local_irq_restore(flags);
-			return;
-		}
-	}
-	local_irq_restore(flags);
-	printk ("%s: tried to remove invalid irq\n", __FUNCTION__);
-}
-
-/*
- * amiga_request_irq : add an interrupt service routine for a particular
- *                     machine specific interrupt source.
- *                     If the addition was successful, it returns 0.
- */
-
-int amiga_request_irq(unsigned int irq,
-		      irqreturn_t (*handler)(int, void *, struct pt_regs *),
-                      unsigned long flags, const char *devname, void *dev_id)
-{
-	irq_node_t *node;
-	int error = 0;
-
-	if (irq >= AMI_IRQS) {
-		printk ("%s: Unknown IRQ %d from %s\n", __FUNCTION__,
-			irq, devname);
-		return -ENXIO;
-	}
-
-	if (irq >= IRQ_AMIGA_AUTO)
-		return cpu_request_irq(irq - IRQ_AMIGA_AUTO, handler,
-		                       flags, devname, dev_id);
-
-	if (irq >= IRQ_AMIGA_CIAB)
-		return cia_request_irq(&ciab_base, irq - IRQ_AMIGA_CIAB,
-		                       handler, flags, devname, dev_id);
-
-	if (irq >= IRQ_AMIGA_CIAA)
-		return cia_request_irq(&ciaa_base, irq - IRQ_AMIGA_CIAA,
-		                       handler, flags, devname, dev_id);
-
-	/*
-	 * IRQ_AMIGA_PORTS & IRQ_AMIGA_EXTER defaults to shared,
-	 * we could add a check here for the SA_SHIRQ flag but all drivers
-	 * should be aware of sharing anyway.
-	 */
-	if (ami_servers[irq]) {
-		if (!(node = new_irq_node()))
-			return -ENOMEM;
-		node->handler = handler;
-		node->flags   = flags;
-		node->dev_id  = dev_id;
-		node->devname = devname;
-		node->next    = NULL;
-		error = amiga_insert_irq(&ami_irq_list[irq], node);
-	} else {
-		ami_irq_list[irq]->handler = handler;
-		ami_irq_list[irq]->flags   = flags;
-		ami_irq_list[irq]->dev_id  = dev_id;
-		ami_irq_list[irq]->devname = devname;
-	}
-
-	/* enable the interrupt */
-	if (irq < IRQ_AMIGA_PORTS && !ami_ablecount[irq])
-		amiga_custom.intena = IF_SETCLR | amiga_intena_vals[irq];
-
-	return error;
-}
-
-void amiga_free_irq(unsigned int irq, void *dev_id)
-{
-	if (irq >= AMI_IRQS) {
-		printk ("%s: Unknown IRQ %d\n", __FUNCTION__, irq);
-		return;
-	}
-
-	if (irq >= IRQ_AMIGA_AUTO)
-		cpu_free_irq(irq - IRQ_AMIGA_AUTO, dev_id);
-
-	if (irq >= IRQ_AMIGA_CIAB) {
-		cia_free_irq(&ciab_base, irq - IRQ_AMIGA_CIAB, dev_id);
-		return;
-	}
-
-	if (irq >= IRQ_AMIGA_CIAA) {
-		cia_free_irq(&ciaa_base, irq - IRQ_AMIGA_CIAA, dev_id);
-		return;
-	}
-
-	if (ami_servers[irq]) {
-		amiga_delete_irq(&ami_irq_list[irq], dev_id);
-		/* if server list empty, disable the interrupt */
-		if (!ami_irq_list[irq] && irq < IRQ_AMIGA_PORTS)
-			amiga_custom.intena = amiga_intena_vals[irq];
-	} else {
-		if (ami_irq_list[irq]->dev_id != dev_id)
-			printk("%s: removing probably wrong IRQ %d from %s\n",
-			       __FUNCTION__, irq, ami_irq_list[irq]->devname);
-		ami_irq_list[irq]->handler = ami_badint;
-		ami_irq_list[irq]->flags   = 0;
-		ami_irq_list[irq]->dev_id  = NULL;
-		ami_irq_list[irq]->devname = NULL;
-		amiga_custom.intena = amiga_intena_vals[irq];
-	}
-}
 
 /*
  * Enable/disable a particular machine specific interrupt source.
  * Note that this may affect other interrupts in case of a shared interrupt.
  * This function should only be called for a _very_ short time to change some
  * internal data, that may not be changed by the interrupt at the same time.
- * ami_(enable|disable)_irq calls may also be nested.
  */
 
-void amiga_enable_irq(unsigned int irq)
+static void amiga_irq_enable(struct irq_data *data)
 {
-	if (irq >= AMI_IRQS) {
-		printk("%s: Unknown IRQ %d\n", __FUNCTION__, irq);
-		return;
-	}
-
-	if (--ami_ablecount[irq])
-		return;
-
-	/* No action for auto-vector interrupts */
-	if (irq >= IRQ_AMIGA_AUTO){
-		printk("%s: Trying to enable auto-vector IRQ %i\n",
-		       __FUNCTION__, irq - IRQ_AMIGA_AUTO);
-		return;
-	}
-
-	if (irq >= IRQ_AMIGA_CIAB) {
-		cia_set_irq(&ciab_base, (1 << (irq - IRQ_AMIGA_CIAB)));
-		cia_able_irq(&ciab_base, CIA_ICR_SETCLR |
-		             (1 << (irq - IRQ_AMIGA_CIAB)));
-		return;
-	}
-
-	if (irq >= IRQ_AMIGA_CIAA) {
-		cia_set_irq(&ciaa_base, (1 << (irq - IRQ_AMIGA_CIAA)));
-		cia_able_irq(&ciaa_base, CIA_ICR_SETCLR |
-		             (1 << (irq - IRQ_AMIGA_CIAA)));
-		return;
-	}
-
-	/* enable the interrupt */
-	amiga_custom.intena = IF_SETCLR | amiga_intena_vals[irq];
+	amiga_custom.intena = IF_SETCLR | (1 << (data->irq - IRQ_USER));
 }
 
-void amiga_disable_irq(unsigned int irq)
+static void amiga_irq_disable(struct irq_data *data)
 {
-	if (irq >= AMI_IRQS) {
-		printk("%s: Unknown IRQ %d\n", __FUNCTION__, irq);
-		return;
-	}
-
-	if (ami_ablecount[irq]++)
-		return;
-
-	/* No action for auto-vector interrupts */
-	if (irq >= IRQ_AMIGA_AUTO) {
-		printk("%s: Trying to disable auto-vector IRQ %i\n",
-		       __FUNCTION__, irq - IRQ_AMIGA_AUTO);
-		return;
-	}
-
-	if (irq >= IRQ_AMIGA_CIAB) {
-		cia_able_irq(&ciab_base, 1 << (irq - IRQ_AMIGA_CIAB));
-		return;
-	}
-
-	if (irq >= IRQ_AMIGA_CIAA) {
-		cia_able_irq(&ciaa_base, 1 << (irq - IRQ_AMIGA_CIAA));
-		return;
-	}
-
-	/* disable the interrupt */
-	amiga_custom.intena = amiga_intena_vals[irq];
-}
-
-inline void amiga_do_irq(int irq, struct pt_regs *fp)
-{
-	kstat_cpu(0).irqs[SYS_IRQS + irq]++;
-	ami_irq_list[irq]->handler(irq, ami_irq_list[irq]->dev_id, fp);
+	amiga_custom.intena = 1 << (data->irq - IRQ_USER);
 }
 
-void amiga_do_irq_list(int irq, struct pt_regs *fp)
-{
-	irq_node_t *node;
-
-	kstat_cpu(0).irqs[SYS_IRQS + irq]++;
-
-	amiga_custom.intreq = amiga_intena_vals[irq];
+static struct irq_chip amiga_irq_chip = {
+	.name		= "amiga",
+	.irq_enable	= amiga_irq_enable,
+	.irq_disable	= amiga_irq_disable,
+};
 
-	for (node = ami_irq_list[irq]; node; node = node->next)
-		node->handler(irq, node->dev_id, fp);
-}
 
 /*
  * The builtin Amiga hardware interrupt handlers.
  */
 
-static irqreturn_t ami_int1(int irq, void *dev_id, struct pt_regs *fp)
+static void ami_int1(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
 
 	/* if serial transmit buffer empty, interrupt */
 	if (ints & IF_TBE) {
 		amiga_custom.intreq = IF_TBE;
-		amiga_do_irq(IRQ_AMIGA_TBE, fp);
+		generic_handle_irq(IRQ_AMIGA_TBE);
 	}
 
 	/* if floppy disk transfer complete, interrupt */
 	if (ints & IF_DSKBLK) {
 		amiga_custom.intreq = IF_DSKBLK;
-		amiga_do_irq(IRQ_AMIGA_DSKBLK, fp);
+		generic_handle_irq(IRQ_AMIGA_DSKBLK);
 	}
 
 	/* if software interrupt set, interrupt */
 	if (ints & IF_SOFT) {
 		amiga_custom.intreq = IF_SOFT;
-		amiga_do_irq(IRQ_AMIGA_SOFT, fp);
+		generic_handle_irq(IRQ_AMIGA_SOFT);
 	}
-	return IRQ_HANDLED;
 }
 
-static irqreturn_t ami_int3(int irq, void *dev_id, struct pt_regs *fp)
+static void ami_int3(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
 
 	/* if a blitter interrupt */
 	if (ints & IF_BLIT) {
 		amiga_custom.intreq = IF_BLIT;
-		amiga_do_irq(IRQ_AMIGA_BLIT, fp);
+		generic_handle_irq(IRQ_AMIGA_BLIT);
 	}
 
 	/* if a copper interrupt */
 	if (ints & IF_COPER) {
 		amiga_custom.intreq = IF_COPER;
-		amiga_do_irq(IRQ_AMIGA_COPPER, fp);
+		generic_handle_irq(IRQ_AMIGA_COPPER);
 	}
 
 	/* if a vertical blank interrupt */
-	if (ints & IF_VERTB)
-		amiga_do_irq_list(IRQ_AMIGA_VERTB, fp);
-	return IRQ_HANDLED;
+	if (ints & IF_VERTB) {
+		amiga_custom.intreq = IF_VERTB;
+		generic_handle_irq(IRQ_AMIGA_VERTB);
+	}
 }
 
-static irqreturn_t ami_int4(int irq, void *dev_id, struct pt_regs *fp)
+static void ami_int4(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
 
 	/* if audio 0 interrupt */
 	if (ints & IF_AUD0) {
 		amiga_custom.intreq = IF_AUD0;
-		amiga_do_irq(IRQ_AMIGA_AUD0, fp);
+		generic_handle_irq(IRQ_AMIGA_AUD0);
 	}
 
 	/* if audio 1 interrupt */
 	if (ints & IF_AUD1) {
 		amiga_custom.intreq = IF_AUD1;
-		amiga_do_irq(IRQ_AMIGA_AUD1, fp);
+		generic_handle_irq(IRQ_AMIGA_AUD1);
 	}
 
 	/* if audio 2 interrupt */
 	if (ints & IF_AUD2) {
 		amiga_custom.intreq = IF_AUD2;
-		amiga_do_irq(IRQ_AMIGA_AUD2, fp);
+		generic_handle_irq(IRQ_AMIGA_AUD2);
 	}
 
 	/* if audio 3 interrupt */
 	if (ints & IF_AUD3) {
 		amiga_custom.intreq = IF_AUD3;
-		amiga_do_irq(IRQ_AMIGA_AUD3, fp);
+		generic_handle_irq(IRQ_AMIGA_AUD3);
 	}
-	return IRQ_HANDLED;
 }
 
-static irqreturn_t ami_int5(int irq, void *dev_id, struct pt_regs *fp)
+static void ami_int5(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
 
 	/* if serial receive buffer full interrupt */
 	if (ints & IF_RBF) {
 		/* acknowledge of IF_RBF must be done by the serial interrupt */
-		amiga_do_irq(IRQ_AMIGA_RBF, fp);
+		generic_handle_irq(IRQ_AMIGA_RBF);
 	}
 
 	/* if a disk sync interrupt */
 	if (ints & IF_DSKSYN) {
 		amiga_custom.intreq = IF_DSKSYN;
-		amiga_do_irq(IRQ_AMIGA_DSKSYN, fp);
+		generic_handle_irq(IRQ_AMIGA_DSKSYN);
 	}
-	return IRQ_HANDLED;
 }
 
-static irqreturn_t ami_int7(int irq, void *dev_id, struct pt_regs *fp)
-{
-	panic ("level 7 interrupt received\n");
-}
 
-irqreturn_t (*amiga_default_handler[SYS_IRQS])(int, void *, struct pt_regs *) = {
-	[0] = ami_badint,
-	[1] = ami_int1,
-	[2] = ami_badint,
-	[3] = ami_int3,
-	[4] = ami_int4,
-	[5] = ami_int5,
-	[6] = ami_badint,
-	[7] = ami_int7
-};
+/*
+ * void amiga_init_IRQ(void)
+ *
+ * Parameters:	None
+ *
+ * Returns:	Nothing
+ *
+ * This function should be called during kernel startup to initialize
+ * the amiga IRQ handling routines.
+ */
 
-int show_amiga_interrupts(struct seq_file *p, void *v)
+void __init amiga_init_IRQ(void)
 {
-	int i;
-	irq_node_t *node;
-
-	for (i = 0; i < AMI_STD_IRQS; i++) {
-		if (!(node = ami_irq_list[i]))
-			continue;
-		seq_printf(p, "ami  %2d: %10u ", i,
-		               kstat_cpu(0).irqs[SYS_IRQS + i]);
-		do {
-			if (node->flags & SA_INTERRUPT)
-				seq_puts(p, "F ");
-			else
-				seq_puts(p, "  ");
-			seq_printf(p, "%s\n", node->devname);
-			if ((node = node->next))
-				seq_puts(p, "                    ");
-		} while (node);
-	}
+	m68k_setup_irq_controller(&amiga_irq_chip, handle_simple_irq, IRQ_USER,
+				  AMI_STD_IRQS);
+
+	irq_set_chained_handler(IRQ_AUTO_1, ami_int1);
+	irq_set_chained_handler(IRQ_AUTO_3, ami_int3);
+	irq_set_chained_handler(IRQ_AUTO_4, ami_int4);
+	irq_set_chained_handler(IRQ_AUTO_5, ami_int5);
+
+	/* turn off PCMCIA interrupts */
+	if (AMIGAHW_PRESENT(PCMCIA))
+		gayle.inten = GAYLE_IRQ_IDE;
 
-	cia_get_irq_list(&ciaa_base, p);
-	cia_get_irq_list(&ciab_base, p);
-	return 0;
+	/* turn off all interrupts and enable the master interrupt bit */
+	amiga_custom.intena = 0x7fff;
+	amiga_custom.intreq = 0x7fff;
+	amiga_custom.intena = IF_SETCLR | IF_INTEN;
+
+	cia_init_IRQ(&ciaa_base);
+	cia_init_IRQ(&ciab_base);
 }
diff --git a/arch/m68k/amiga/amisound.c b/arch/m68k/amiga/amisound.c
index ae94db5d93b..90a60d758f8 100644
--- a/arch/m68k/amiga/amisound.c
+++ b/arch/m68k/amiga/amisound.c
@@ -8,13 +8,12 @@
  * for more details.
  */
 
-#include <linux/config.h>
 #include <linux/jiffies.h>
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/string.h>
+#include <linux/module.h>
 
-#include <asm/system.h>
 #include <asm/amigahw.h>
 
 static unsigned short *snd_data;
@@ -22,7 +21,7 @@ static const signed char sine_data[] = {
 	0,  39,  75,  103,  121,  127,  121,  103,  75,  39,
 	0, -39, -75, -103, -121, -127, -121, -103, -75, -39
 };
-#define DATA_SIZE	(sizeof(sine_data)/sizeof(sine_data[0]))
+#define DATA_SIZE	ARRAY_SIZE(sine_data)
 
 #define custom amiga_custom
 
@@ -32,6 +31,7 @@ static const signed char sine_data[] = {
      */
 
 volatile unsigned short amiga_audio_min_period = 124; /* Default for pre-OCS */
+EXPORT_SYMBOL(amiga_audio_min_period);
 
 #define MAX_PERIOD	(65535)
 
@@ -41,6 +41,7 @@ volatile unsigned short amiga_audio_min_period = 124; /* Default for pre-OCS */
      */
 
 unsigned short amiga_audio_period = MAX_PERIOD;
+EXPORT_SYMBOL(amiga_audio_period);
 
 static unsigned long clock_constant;
 
@@ -50,7 +51,7 @@ void __init amiga_init_sound(void)
 
 	snd_data = amiga_chip_alloc_res(sizeof(sine_data), &beep_res);
 	if (!snd_data) {
-		printk (KERN_CRIT "amiga init_sound: failed to allocate chipmem\n");
+		pr_crit("amiga init_sound: failed to allocate chipmem\n");
 		return;
 	}
 	memcpy (snd_data, sine_data, sizeof(sine_data));
diff --git a/arch/m68k/amiga/chipram.c b/arch/m68k/amiga/chipram.c
index 558d5fd2d2b..ba03cec3f71 100644
--- a/arch/m68k/amiga/chipram.c
+++ b/arch/m68k/amiga/chipram.c
@@ -7,127 +7,117 @@
 **	Rewritten 15/9/2000 by Geert to use resource management
 */
 
-#include <linux/config.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
+#include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/slab.h>
 #include <linux/string.h>
+#include <linux/module.h>
+
+#include <asm/atomic.h>
 #include <asm/page.h>
 #include <asm/amigahw.h>
 
 unsigned long amiga_chip_size;
+EXPORT_SYMBOL(amiga_chip_size);
 
 static struct resource chipram_res = {
-    .name = "Chip RAM", .start = CHIP_PHYSADDR
+	.name = "Chip RAM", .start = CHIP_PHYSADDR
 };
-static unsigned long chipavail;
+static atomic_t chipavail;
 
 
 void __init amiga_chip_init(void)
 {
-    if (!AMIGAHW_PRESENT(CHIP_RAM))
-	return;
-
-#ifndef CONFIG_APUS_FAST_EXCEPT
-    /*
-     *  Remove the first 4 pages where PPC exception handlers will be located
-     */
-    amiga_chip_size -= 0x4000;
-#endif
-    chipram_res.end = amiga_chip_size-1;
-    request_resource(&iomem_resource, &chipram_res);
-
-    chipavail = amiga_chip_size;
+	if (!AMIGAHW_PRESENT(CHIP_RAM))
+		return;
+
+	chipram_res.end = CHIP_PHYSADDR + amiga_chip_size - 1;
+	request_resource(&iomem_resource, &chipram_res);
+
+	atomic_set(&chipavail, amiga_chip_size);
 }
 
 
 void *amiga_chip_alloc(unsigned long size, const char *name)
 {
-    struct resource *res;
+	struct resource *res;
+	void *p;
 
-    /* round up */
-    size = PAGE_ALIGN(size);
+	res = kzalloc(sizeof(struct resource), GFP_KERNEL);
+	if (!res)
+		return NULL;
 
-#ifdef DEBUG
-    printk("amiga_chip_alloc: allocate %ld bytes\n", size);
-#endif
-    res = kmalloc(sizeof(struct resource), GFP_KERNEL);
-    if (!res)
-	return NULL;
-    memset(res, 0, sizeof(struct resource));
-    res->name = name;
+	res->name = name;
+	p = amiga_chip_alloc_res(size, res);
+	if (!p) {
+		kfree(res);
+		return NULL;
+	}
 
-    if (allocate_resource(&chipram_res, res, size, 0, UINT_MAX, PAGE_SIZE, NULL, NULL) < 0) {
-	kfree(res);
-	return NULL;
-    }
-    chipavail -= size;
-#ifdef DEBUG
-    printk("amiga_chip_alloc: returning %lx\n", res->start);
-#endif
-    return (void *)ZTWO_VADDR(res->start);
+	return p;
 }
+EXPORT_SYMBOL(amiga_chip_alloc);
 
 
-    /*
-     *  Warning:
-     *  amiga_chip_alloc_res is meant only for drivers that need to allocate
-     *  Chip RAM before kmalloc() is functional. As a consequence, those
-     *  drivers must not free that Chip RAM afterwards.
-     */
+	/*
+	 *  Warning:
+	 *  amiga_chip_alloc_res is meant only for drivers that need to
+	 *  allocate Chip RAM before kmalloc() is functional. As a consequence,
+	 *  those drivers must not free that Chip RAM afterwards.
+	 */
 
-void * __init amiga_chip_alloc_res(unsigned long size, struct resource *res)
+void *amiga_chip_alloc_res(unsigned long size, struct resource *res)
 {
-    unsigned long start;
-
-    /* round up */
-    size = PAGE_ALIGN(size);
-    /* dmesg into chipmem prefers memory at the safe end */
-    start = CHIP_PHYSADDR + chipavail - size;
-
-#ifdef DEBUG
-    printk("amiga_chip_alloc_res: allocate %ld bytes\n", size);
-#endif
-    if (allocate_resource(&chipram_res, res, size, start, UINT_MAX, PAGE_SIZE, NULL, NULL) < 0) {
-	printk("amiga_chip_alloc_res: first alloc failed!\n");
-	if (allocate_resource(&chipram_res, res, size, 0, UINT_MAX, PAGE_SIZE, NULL, NULL) < 0)
-	    return NULL;
-    }
-    chipavail -= size;
-#ifdef DEBUG
-    printk("amiga_chip_alloc_res: returning %lx\n", res->start);
-#endif
-    return (void *)ZTWO_VADDR(res->start);
+	int error;
+
+	/* round up */
+	size = PAGE_ALIGN(size);
+
+	pr_debug("amiga_chip_alloc_res: allocate %lu bytes\n", size);
+	error = allocate_resource(&chipram_res, res, size, 0, UINT_MAX,
+				  PAGE_SIZE, NULL, NULL);
+	if (error < 0) {
+		pr_err("amiga_chip_alloc_res: allocate_resource() failed %d!\n",
+		       error);
+		return NULL;
+	}
+
+	atomic_sub(size, &chipavail);
+	pr_debug("amiga_chip_alloc_res: returning %pR\n", res);
+	return ZTWO_VADDR(res->start);
 }
 
 void amiga_chip_free(void *ptr)
 {
-    unsigned long start = ZTWO_PADDR(ptr);
-    struct resource **p, *res;
-    unsigned long size;
-
-    for (p = &chipram_res.child; (res = *p); p = &res->sibling) {
-	if (res->start != start)
-	    continue;
-	*p = res->sibling;
-	size = res->end-start;
-#ifdef DEBUG
-	printk("amiga_chip_free: free %ld bytes at %p\n", size, ptr);
-#endif
-	chipavail += size;
+	unsigned long start = ZTWO_PADDR(ptr);
+	struct resource *res;
+	unsigned long size;
+
+	res = lookup_resource(&chipram_res, start);
+	if (!res) {
+		pr_err("amiga_chip_free: trying to free nonexistent region at "
+		       "%p\n", ptr);
+		return;
+	}
+
+	size = resource_size(res);
+	pr_debug("amiga_chip_free: free %lu bytes at %p\n", size, ptr);
+	atomic_add(size, &chipavail);
+	release_resource(res);
 	kfree(res);
-	return;
-    }
-    printk("amiga_chip_free: trying to free nonexistent region at %p\n", ptr);
 }
+EXPORT_SYMBOL(amiga_chip_free);
 
 
 unsigned long amiga_chip_avail(void)
 {
-#ifdef DEBUG
-	printk("amiga_chip_avail : %ld bytes\n", chipavail);
-#endif
-	return chipavail;
+	unsigned long n = atomic_read(&chipavail);
+
+	pr_debug("amiga_chip_avail : %lu bytes\n", n);
+	return n;
 }
+EXPORT_SYMBOL(amiga_chip_avail);
+
diff --git a/arch/m68k/amiga/cia.c b/arch/m68k/amiga/cia.c
index 9476eb9440f..2081b8cd559 100644
--- a/arch/m68k/amiga/cia.c
+++ b/arch/m68k/amiga/cia.c
@@ -18,6 +18,7 @@
 #include <linux/init.h>
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
 
 #include <asm/irq.h>
 #include <asm/amigahw.h>
@@ -29,21 +30,18 @@ struct ciabase {
 	unsigned short int_mask;
 	int handler_irq, cia_irq, server_irq;
 	char *name;
-	irq_handler_t irq_list[CIA_IRQS];
 } ciaa_base = {
 	.cia		= &ciaa,
 	.int_mask	= IF_PORTS,
-	.handler_irq	= IRQ_AMIGA_AUTO_2,
+	.handler_irq	= IRQ_AMIGA_PORTS,
 	.cia_irq	= IRQ_AMIGA_CIAA,
-	.server_irq	= IRQ_AMIGA_PORTS,
-	.name		= "CIAA handler"
+	.name		= "CIAA"
 }, ciab_base = {
 	.cia		= &ciab,
 	.int_mask	= IF_EXTER,
-	.handler_irq	= IRQ_AMIGA_AUTO_6,
+	.handler_irq	= IRQ_AMIGA_EXTER,
 	.cia_irq	= IRQ_AMIGA_CIAB,
-	.server_irq	= IRQ_AMIGA_EXTER,
-	.name		= "CIAB handler"
+	.name		= "CIAB"
 };
 
 /*
@@ -66,13 +64,11 @@ unsigned char cia_set_irq(struct ciabase *base, unsigned char mask)
 
 /*
  *  Enable or disable CIA interrupts, return old interrupt mask,
- *  interrupts will only be enabled if a handler exists
  */
 
 unsigned char cia_able_irq(struct ciabase *base, unsigned char mask)
 {
-	unsigned char old, tmp;
-	int i;
+	unsigned char old;
 
 	old = base->icr_mask;
 	base->icr_data |= base->cia->icr;
@@ -82,99 +78,109 @@ unsigned char cia_able_irq(struct ciabase *base, unsigned char mask)
 	else
 		base->icr_mask &= ~mask;
 	base->icr_mask &= CIA_ICR_ALL;
-	for (i = 0, tmp = 1; i < CIA_IRQS; i++, tmp <<= 1) {
-		if ((tmp & base->icr_mask) && !base->irq_list[i].handler) {
-			base->icr_mask &= ~tmp;
-			base->cia->icr = tmp;
-		}
-	}
 	if (base->icr_data & base->icr_mask)
 		amiga_custom.intreq = IF_SETCLR | base->int_mask;
 	return old;
 }
 
-int cia_request_irq(struct ciabase *base, unsigned int irq,
-                    irqreturn_t (*handler)(int, void *, struct pt_regs *),
-                    unsigned long flags, const char *devname, void *dev_id)
+static irqreturn_t cia_handler(int irq, void *dev_id)
 {
-	unsigned char mask;
-
-	base->irq_list[irq].handler = handler;
-	base->irq_list[irq].flags   = flags;
-	base->irq_list[irq].dev_id  = dev_id;
-	base->irq_list[irq].devname = devname;
+	struct ciabase *base = dev_id;
+	int mach_irq;
+	unsigned char ints;
 
-	/* enable the interrupt */
-	mask = 1 << irq;
-	cia_set_irq(base, mask);
-	cia_able_irq(base, CIA_ICR_SETCLR | mask);
-	return 0;
+	mach_irq = base->cia_irq;
+	ints = cia_set_irq(base, CIA_ICR_ALL);
+	amiga_custom.intreq = base->int_mask;
+	for (; ints; mach_irq++, ints >>= 1) {
+		if (ints & 1)
+			generic_handle_irq(mach_irq);
+	}
+	return IRQ_HANDLED;
 }
 
-void cia_free_irq(struct ciabase *base, unsigned int irq, void *dev_id)
+static void cia_irq_enable(struct irq_data *data)
 {
-	if (base->irq_list[irq].dev_id != dev_id)
-		printk("%s: removing probably wrong IRQ %i from %s\n",
-		       __FUNCTION__, base->cia_irq + irq,
-		       base->irq_list[irq].devname);
+	unsigned int irq = data->irq;
+	unsigned char mask;
 
-	base->irq_list[irq].handler = NULL;
-	base->irq_list[irq].flags   = 0;
+	if (irq >= IRQ_AMIGA_CIAB) {
+		mask = 1 << (irq - IRQ_AMIGA_CIAB);
+		cia_set_irq(&ciab_base, mask);
+		cia_able_irq(&ciab_base, CIA_ICR_SETCLR | mask);
+	} else {
+		mask = 1 << (irq - IRQ_AMIGA_CIAA);
+		cia_set_irq(&ciaa_base, mask);
+		cia_able_irq(&ciaa_base, CIA_ICR_SETCLR | mask);
+	}
+}
+
+static void cia_irq_disable(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
 
-	cia_able_irq(base, 1 << irq);
+	if (irq >= IRQ_AMIGA_CIAB)
+		cia_able_irq(&ciab_base, 1 << (irq - IRQ_AMIGA_CIAB));
+	else
+		cia_able_irq(&ciaa_base, 1 << (irq - IRQ_AMIGA_CIAA));
 }
 
-static irqreturn_t cia_handler(int irq, void *dev_id, struct pt_regs *fp)
+static struct irq_chip cia_irq_chip = {
+	.name		= "cia",
+	.irq_enable	= cia_irq_enable,
+	.irq_disable	= cia_irq_disable,
+};
+
+/*
+ * Override auto irq 2 & 6 and use them as general chain
+ * for external interrupts, we link the CIA interrupt sources
+ * into this chain.
+ */
+
+static void auto_irq_enable(struct irq_data *data)
 {
-	struct ciabase *base = (struct ciabase *)dev_id;
-	int mach_irq, i;
-	unsigned char ints;
+	switch (data->irq) {
+	case IRQ_AUTO_2:
+		amiga_custom.intena = IF_SETCLR | IF_PORTS;
+		break;
+	case IRQ_AUTO_6:
+		amiga_custom.intena = IF_SETCLR | IF_EXTER;
+		break;
+	}
+}
 
-	mach_irq = base->cia_irq;
-	irq = SYS_IRQS + mach_irq;
-	ints = cia_set_irq(base, CIA_ICR_ALL);
-	amiga_custom.intreq = base->int_mask;
-	for (i = 0; i < CIA_IRQS; i++, irq++, mach_irq++) {
-		if (ints & 1) {
-			kstat_cpu(0).irqs[irq]++;
-			base->irq_list[i].handler(mach_irq, base->irq_list[i].dev_id, fp);
-		}
-		ints >>= 1;
+static void auto_irq_disable(struct irq_data *data)
+{
+	switch (data->irq) {
+	case IRQ_AUTO_2:
+		amiga_custom.intena = IF_PORTS;
+		break;
+	case IRQ_AUTO_6:
+		amiga_custom.intena = IF_EXTER;
+		break;
 	}
-	amiga_do_irq_list(base->server_irq, fp);
-	return IRQ_HANDLED;
 }
 
+static struct irq_chip auto_irq_chip = {
+	.name		= "auto",
+	.irq_enable	= auto_irq_enable,
+	.irq_disable	= auto_irq_disable,
+};
+
 void __init cia_init_IRQ(struct ciabase *base)
 {
-	int i;
-
-	/* init isr handlers */
-	for (i = 0; i < CIA_IRQS; i++) {
-		base->irq_list[i].handler = NULL;
-		base->irq_list[i].flags   = 0;
-	}
+	m68k_setup_irq_controller(&cia_irq_chip, handle_simple_irq,
+				  base->cia_irq, CIA_IRQS);
 
 	/* clear any pending interrupt and turn off all interrupts */
 	cia_set_irq(base, CIA_ICR_ALL);
 	cia_able_irq(base, CIA_ICR_ALL);
 
-	/* install CIA handler */
-	request_irq(base->handler_irq, cia_handler, 0, base->name, base);
-
-	amiga_custom.intena = IF_SETCLR | base->int_mask;
-}
-
-int cia_get_irq_list(struct ciabase *base, struct seq_file *p)
-{
-	int i, j;
-
-	j = base->cia_irq;
-	for (i = 0; i < CIA_IRQS; i++) {
-		seq_printf(p, "cia  %2d: %10d ", j + i,
-			       kstat_cpu(0).irqs[SYS_IRQS + j + i]);
-		seq_puts(p, "  ");
-		seq_printf(p, "%s\n", base->irq_list[i].devname);
-	}
-	return 0;
+	/* override auto int and install CIA handler */
+	m68k_setup_irq_controller(&auto_irq_chip, handle_simple_irq,
+				  base->handler_irq, 1);
+	m68k_irq_startup_irq(base->handler_irq);
+	if (request_irq(base->handler_irq, cia_handler, IRQF_SHARED,
+			base->name, base))
+		pr_err("Couldn't register %s interrupt\n", base->name);
 }
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index da24476db8e..01693df7f2f 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -12,10 +12,10 @@
  * Miscellaneous Amiga stuff
  */
 
-#include <linux/config.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
+#include <linux/seq_file.h>
 #include <linux/tty.h>
 #include <linux/console.h>
 #include <linux/rtc.h>
@@ -23,13 +23,14 @@
 #include <linux/vt_kern.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#ifdef CONFIG_ZORRO
 #include <linux/zorro.h>
-#endif
+#include <linux/module.h>
+#include <linux/keyboard.h>
 
 #include <asm/bootinfo.h>
+#include <asm/bootinfo-amiga.h>
+#include <asm/byteorder.h>
 #include <asm/setup.h>
-#include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/amigahw.h>
 #include <asm/amigaints.h>
@@ -38,14 +39,24 @@
 #include <asm/machdep.h>
 #include <asm/io.h>
 
-unsigned long amiga_model;
+static unsigned long amiga_model;
+
 unsigned long amiga_eclock;
-unsigned long amiga_masterclock;
+EXPORT_SYMBOL(amiga_eclock);
+
 unsigned long amiga_colorclock;
+EXPORT_SYMBOL(amiga_colorclock);
+
 unsigned long amiga_chipset;
+EXPORT_SYMBOL(amiga_chipset);
+
 unsigned char amiga_vblank;
-unsigned char amiga_psfreq;
+EXPORT_SYMBOL(amiga_vblank);
+
+static unsigned char amiga_psfreq;
+
 struct amiga_hw_present amiga_hw_present;
+EXPORT_SYMBOL(amiga_hw_present);
 
 static char s_a500[] __initdata = "A500";
 static char s_a500p[] __initdata = "A500+";
@@ -63,67 +74,43 @@ static char s_cdtv[] __initdata = "CDTV";
 static char s_cd32[] __initdata = "CD32";
 static char s_draco[] __initdata = "Draco";
 static char *amiga_models[] __initdata = {
-    [AMI_500-AMI_500]		= s_a500,
-    [AMI_500PLUS-AMI_500]	= s_a500p,
-    [AMI_600-AMI_500]		= s_a600,
-    [AMI_1000-AMI_500]		= s_a1000,
-    [AMI_1200-AMI_500]		= s_a1200,
-    [AMI_2000-AMI_500]		= s_a2000,
-    [AMI_2500-AMI_500]		= s_a2500,
-    [AMI_3000-AMI_500]		= s_a3000,
-    [AMI_3000T-AMI_500]		= s_a3000t,
-    [AMI_3000PLUS-AMI_500]	= s_a3000p,
-    [AMI_4000-AMI_500]		= s_a4000,
-    [AMI_4000T-AMI_500]		= s_a4000t,
-    [AMI_CDTV-AMI_500]		= s_cdtv,
-    [AMI_CD32-AMI_500]		= s_cd32,
-    [AMI_DRACO-AMI_500]		= s_draco,
+	[AMI_500-AMI_500]	= s_a500,
+	[AMI_500PLUS-AMI_500]	= s_a500p,
+	[AMI_600-AMI_500]	= s_a600,
+	[AMI_1000-AMI_500]	= s_a1000,
+	[AMI_1200-AMI_500]	= s_a1200,
+	[AMI_2000-AMI_500]	= s_a2000,
+	[AMI_2500-AMI_500]	= s_a2500,
+	[AMI_3000-AMI_500]	= s_a3000,
+	[AMI_3000T-AMI_500]	= s_a3000t,
+	[AMI_3000PLUS-AMI_500]	= s_a3000p,
+	[AMI_4000-AMI_500]	= s_a4000,
+	[AMI_4000T-AMI_500]	= s_a4000t,
+	[AMI_CDTV-AMI_500]	= s_cdtv,
+	[AMI_CD32-AMI_500]	= s_cd32,
+	[AMI_DRACO-AMI_500]	= s_draco,
 };
 
 static char amiga_model_name[13] = "Amiga ";
 
-extern char m68k_debug_device[];
-
-static void amiga_sched_init(irqreturn_t (*handler)(int, void *, struct pt_regs *));
-/* amiga specific irq functions */
-extern void amiga_init_IRQ (void);
-extern irqreturn_t (*amiga_default_handler[]) (int, void *, struct pt_regs *);
-extern int amiga_request_irq (unsigned int irq,
-			      irqreturn_t (*handler)(int, void *, struct pt_regs *),
-                              unsigned long flags, const char *devname,
-			      void *dev_id);
-extern void amiga_free_irq (unsigned int irq, void *dev_id);
-extern void amiga_enable_irq (unsigned int);
-extern void amiga_disable_irq (unsigned int);
+static void amiga_sched_init(irq_handler_t handler);
 static void amiga_get_model(char *model);
-static int amiga_get_hardware_list(char *buffer);
-extern int show_amiga_interrupts (struct seq_file *, void *);
+static void amiga_get_hardware_list(struct seq_file *m);
 /* amiga specific timer functions */
-static unsigned long amiga_gettimeoffset (void);
-static int a3000_hwclk (int, struct rtc_time *);
-static int a2000_hwclk (int, struct rtc_time *);
-static int amiga_set_clock_mmss (unsigned long);
-static unsigned int amiga_get_ss (void);
-extern void amiga_mksound( unsigned int count, unsigned int ticks );
-#ifdef CONFIG_AMIGA_FLOPPY
-extern void amiga_floppy_setup(char *, int *);
-#endif
-static void amiga_reset (void);
+static u32 amiga_gettimeoffset(void);
+extern void amiga_mksound(unsigned int count, unsigned int ticks);
+static void amiga_reset(void);
 extern void amiga_init_sound(void);
-static void amiga_savekmsg_init(void);
 static void amiga_mem_console_write(struct console *co, const char *b,
 				    unsigned int count);
-void amiga_serial_console_write(struct console *co, const char *s,
-				unsigned int count);
-static void amiga_debug_init(void);
 #ifdef CONFIG_HEARTBEAT
 static void amiga_heartbeat(int on);
 #endif
 
 static struct console amiga_console_driver = {
-	.name =		"debug",
-	.flags =	CON_PRINTBUFFER,
-	.index =	-1,
+	.name	= "debug",
+	.flags	= CON_PRINTBUFFER,
+	.index	= -1,
 };
 
 
@@ -132,24 +119,20 @@ static struct console amiga_console_driver = {
      */
 
 static struct {
-    struct resource _ciab, _ciaa, _custom, _kickstart;
+	struct resource _ciab, _ciaa, _custom, _kickstart;
 } mb_resources = {
-    ._ciab = {
-	.name = "CIA B", .start = 0x00bfd000, .end = 0x00bfdfff
-    },
-    ._ciaa = {
-	.name = "CIA A", .start = 0x00bfe000, .end = 0x00bfefff
-    },
-    ._custom = {
-	.name = "Custom I/O", .start = 0x00dff000, .end = 0x00dfffff
-    },
-    ._kickstart = {
-	.name = "Kickstart ROM", .start = 0x00f80000, .end = 0x00ffffff
-    }
-};
-
-static struct resource rtc_resource = {
-    .start = 0x00dc0000, .end = 0x00dcffff
+	._ciab = {
+		.name = "CIA B", .start = 0x00bfd000, .end = 0x00bfdfff
+	},
+	._ciaa = {
+		.name = "CIA A", .start = 0x00bfe000, .end = 0x00bfefff
+	},
+	._custom = {
+		.name = "Custom I/O", .start = 0x00dff000, .end = 0x00dfffff
+	},
+	._kickstart = {
+		.name = "Kickstart ROM", .start = 0x00f80000, .end = 0x00ffffff
+	}
 };
 
 static struct resource ram_resource[NUM_MEMINFO];
@@ -159,59 +142,59 @@ static struct resource ram_resource[NUM_MEMINFO];
      *  Parse an Amiga-specific record in the bootinfo
      */
 
-int amiga_parse_bootinfo(const struct bi_record *record)
+int __init amiga_parse_bootinfo(const struct bi_record *record)
 {
-    int unknown = 0;
-    const unsigned long *data = record->data;
+	int unknown = 0;
+	const void *data = record->data;
 
-    switch (record->tag) {
+	switch (be16_to_cpu(record->tag)) {
 	case BI_AMIGA_MODEL:
-	    amiga_model = *data;
-	    break;
+		amiga_model = be32_to_cpup(data);
+		break;
 
 	case BI_AMIGA_ECLOCK:
-	    amiga_eclock = *data;
-	    break;
+		amiga_eclock = be32_to_cpup(data);
+		break;
 
 	case BI_AMIGA_CHIPSET:
-	    amiga_chipset = *data;
-	    break;
+		amiga_chipset = be32_to_cpup(data);
+		break;
 
 	case BI_AMIGA_CHIP_SIZE:
-	    amiga_chip_size = *(const int *)data;
-	    break;
+		amiga_chip_size = be32_to_cpup(data);
+		break;
 
 	case BI_AMIGA_VBLANK:
-	    amiga_vblank = *(const unsigned char *)data;
-	    break;
+		amiga_vblank = *(const __u8 *)data;
+		break;
 
 	case BI_AMIGA_PSFREQ:
-	    amiga_psfreq = *(const unsigned char *)data;
-	    break;
+		amiga_psfreq = *(const __u8 *)data;
+		break;
 
 	case BI_AMIGA_AUTOCON:
 #ifdef CONFIG_ZORRO
-	    if (zorro_num_autocon < ZORRO_NUM_AUTO) {
-		const struct ConfigDev *cd = (struct ConfigDev *)data;
-		struct zorro_dev *dev = &zorro_autocon[zorro_num_autocon++];
-		dev->rom = cd->cd_Rom;
-		dev->slotaddr = cd->cd_SlotAddr;
-		dev->slotsize = cd->cd_SlotSize;
-		dev->resource.start = (unsigned long)cd->cd_BoardAddr;
-		dev->resource.end = dev->resource.start+cd->cd_BoardSize-1;
-	    } else
-		printk("amiga_parse_bootinfo: too many AutoConfig devices\n");
+		if (zorro_num_autocon < ZORRO_NUM_AUTO) {
+			const struct ConfigDev *cd = data;
+			struct zorro_dev_init *dev = &zorro_autocon_init[zorro_num_autocon++];
+			dev->rom = cd->cd_Rom;
+			dev->slotaddr = be16_to_cpu(cd->cd_SlotAddr);
+			dev->slotsize = be16_to_cpu(cd->cd_SlotSize);
+			dev->boardaddr = be32_to_cpu(cd->cd_BoardAddr);
+			dev->boardsize = be32_to_cpu(cd->cd_BoardSize);
+		} else
+			pr_warn("amiga_parse_bootinfo: too many AutoConfig devices\n");
 #endif /* CONFIG_ZORRO */
-	    break;
+		break;
 
 	case BI_AMIGA_SERPER:
-	    /* serial port period: ignored here */
-	    break;
+		/* serial port period: ignored here */
+		break;
 
 	default:
-	    unknown = 1;
-    }
-    return(unknown);
+		unknown = 1;
+	}
+	return unknown;
 }
 
     /*
@@ -220,308 +203,279 @@ int amiga_parse_bootinfo(const struct bi_record *record)
 
 static void __init amiga_identify(void)
 {
-  /* Fill in some default values, if necessary */
-  if (amiga_eclock == 0)
-    amiga_eclock = 709379;
-
-  memset(&amiga_hw_present, 0, sizeof(amiga_hw_present));
-
-  printk("Amiga hardware found: ");
-  if (amiga_model >= AMI_500 && amiga_model <= AMI_DRACO) {
-    printk("[%s] ", amiga_models[amiga_model-AMI_500]);
-    strcat(amiga_model_name, amiga_models[amiga_model-AMI_500]);
-  }
-
-  switch(amiga_model) {
-  case AMI_UNKNOWN:
-    goto Generic;
-
-  case AMI_600:
-  case AMI_1200:
-    AMIGAHW_SET(A1200_IDE);
-    AMIGAHW_SET(PCMCIA);
-  case AMI_500:
-  case AMI_500PLUS:
-  case AMI_1000:
-  case AMI_2000:
-  case AMI_2500:
-    AMIGAHW_SET(A2000_CLK);	/* Is this correct for all models? */
-    goto Generic;
-
-  case AMI_3000:
-  case AMI_3000T:
-    AMIGAHW_SET(AMBER_FF);
-    AMIGAHW_SET(MAGIC_REKICK);
-    /* fall through */
-  case AMI_3000PLUS:
-    AMIGAHW_SET(A3000_SCSI);
-    AMIGAHW_SET(A3000_CLK);
-    AMIGAHW_SET(ZORRO3);
-    goto Generic;
-
-  case AMI_4000T:
-    AMIGAHW_SET(A4000_SCSI);
-    /* fall through */
-  case AMI_4000:
-    AMIGAHW_SET(A4000_IDE);
-    AMIGAHW_SET(A3000_CLK);
-    AMIGAHW_SET(ZORRO3);
-    goto Generic;
-
-  case AMI_CDTV:
-  case AMI_CD32:
-    AMIGAHW_SET(CD_ROM);
-    AMIGAHW_SET(A2000_CLK);             /* Is this correct? */
-    goto Generic;
-
-  Generic:
-    AMIGAHW_SET(AMI_VIDEO);
-    AMIGAHW_SET(AMI_BLITTER);
-    AMIGAHW_SET(AMI_AUDIO);
-    AMIGAHW_SET(AMI_FLOPPY);
-    AMIGAHW_SET(AMI_KEYBOARD);
-    AMIGAHW_SET(AMI_MOUSE);
-    AMIGAHW_SET(AMI_SERIAL);
-    AMIGAHW_SET(AMI_PARALLEL);
-    AMIGAHW_SET(CHIP_RAM);
-    AMIGAHW_SET(PAULA);
-
-    switch(amiga_chipset) {
-    case CS_OCS:
-    case CS_ECS:
-    case CS_AGA:
-      switch (amiga_custom.deniseid & 0xf) {
-      case 0x0c:
-	AMIGAHW_SET(DENISE_HR);
-	break;
-      case 0x08:
-	AMIGAHW_SET(LISA);
-	break;
-      }
-      break;
-    default:
-      AMIGAHW_SET(DENISE);
-      break;
-    }
-    switch ((amiga_custom.vposr>>8) & 0x7f) {
-    case 0x00:
-      AMIGAHW_SET(AGNUS_PAL);
-      break;
-    case 0x10:
-      AMIGAHW_SET(AGNUS_NTSC);
-      break;
-    case 0x20:
-    case 0x21:
-      AMIGAHW_SET(AGNUS_HR_PAL);
-      break;
-    case 0x30:
-    case 0x31:
-      AMIGAHW_SET(AGNUS_HR_NTSC);
-      break;
-    case 0x22:
-    case 0x23:
-      AMIGAHW_SET(ALICE_PAL);
-      break;
-    case 0x32:
-    case 0x33:
-      AMIGAHW_SET(ALICE_NTSC);
-      break;
-    }
-    AMIGAHW_SET(ZORRO);
-    break;
-
-  case AMI_DRACO:
-    panic("No support for Draco yet");
-
-  default:
-    panic("Unknown Amiga Model");
-  }
+	/* Fill in some default values, if necessary */
+	if (amiga_eclock == 0)
+		amiga_eclock = 709379;
 
-#define AMIGAHW_ANNOUNCE(name, str)			\
-  if (AMIGAHW_PRESENT(name))				\
-    printk(str)
-
-  AMIGAHW_ANNOUNCE(AMI_VIDEO, "VIDEO ");
-  AMIGAHW_ANNOUNCE(AMI_BLITTER, "BLITTER ");
-  AMIGAHW_ANNOUNCE(AMBER_FF, "AMBER_FF ");
-  AMIGAHW_ANNOUNCE(AMI_AUDIO, "AUDIO ");
-  AMIGAHW_ANNOUNCE(AMI_FLOPPY, "FLOPPY ");
-  AMIGAHW_ANNOUNCE(A3000_SCSI, "A3000_SCSI ");
-  AMIGAHW_ANNOUNCE(A4000_SCSI, "A4000_SCSI ");
-  AMIGAHW_ANNOUNCE(A1200_IDE, "A1200_IDE ");
-  AMIGAHW_ANNOUNCE(A4000_IDE, "A4000_IDE ");
-  AMIGAHW_ANNOUNCE(CD_ROM, "CD_ROM ");
-  AMIGAHW_ANNOUNCE(AMI_KEYBOARD, "KEYBOARD ");
-  AMIGAHW_ANNOUNCE(AMI_MOUSE, "MOUSE ");
-  AMIGAHW_ANNOUNCE(AMI_SERIAL, "SERIAL ");
-  AMIGAHW_ANNOUNCE(AMI_PARALLEL, "PARALLEL ");
-  AMIGAHW_ANNOUNCE(A2000_CLK, "A2000_CLK ");
-  AMIGAHW_ANNOUNCE(A3000_CLK, "A3000_CLK ");
-  AMIGAHW_ANNOUNCE(CHIP_RAM, "CHIP_RAM ");
-  AMIGAHW_ANNOUNCE(PAULA, "PAULA ");
-  AMIGAHW_ANNOUNCE(DENISE, "DENISE ");
-  AMIGAHW_ANNOUNCE(DENISE_HR, "DENISE_HR ");
-  AMIGAHW_ANNOUNCE(LISA, "LISA ");
-  AMIGAHW_ANNOUNCE(AGNUS_PAL, "AGNUS_PAL ");
-  AMIGAHW_ANNOUNCE(AGNUS_NTSC, "AGNUS_NTSC ");
-  AMIGAHW_ANNOUNCE(AGNUS_HR_PAL, "AGNUS_HR_PAL ");
-  AMIGAHW_ANNOUNCE(AGNUS_HR_NTSC, "AGNUS_HR_NTSC ");
-  AMIGAHW_ANNOUNCE(ALICE_PAL, "ALICE_PAL ");
-  AMIGAHW_ANNOUNCE(ALICE_NTSC, "ALICE_NTSC ");
-  AMIGAHW_ANNOUNCE(MAGIC_REKICK, "MAGIC_REKICK ");
-  AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA ");
-  if (AMIGAHW_PRESENT(ZORRO))
-    printk("ZORRO%s ", AMIGAHW_PRESENT(ZORRO3) ? "3" : "");
-  printk("\n");
+	memset(&amiga_hw_present, 0, sizeof(amiga_hw_present));
+
+	pr_info("Amiga hardware found: ");
+	if (amiga_model >= AMI_500 && amiga_model <= AMI_DRACO) {
+		pr_cont("[%s] ", amiga_models[amiga_model-AMI_500]);
+		strcat(amiga_model_name, amiga_models[amiga_model-AMI_500]);
+	}
+
+	switch (amiga_model) {
+	case AMI_UNKNOWN:
+		goto Generic;
+
+	case AMI_600:
+	case AMI_1200:
+		AMIGAHW_SET(A1200_IDE);
+		AMIGAHW_SET(PCMCIA);
+	case AMI_500:
+	case AMI_500PLUS:
+	case AMI_1000:
+	case AMI_2000:
+	case AMI_2500:
+		AMIGAHW_SET(A2000_CLK);	/* Is this correct for all models? */
+		goto Generic;
+
+	case AMI_3000:
+	case AMI_3000T:
+		AMIGAHW_SET(AMBER_FF);
+		AMIGAHW_SET(MAGIC_REKICK);
+		/* fall through */
+	case AMI_3000PLUS:
+		AMIGAHW_SET(A3000_SCSI);
+		AMIGAHW_SET(A3000_CLK);
+		AMIGAHW_SET(ZORRO3);
+		goto Generic;
+
+	case AMI_4000T:
+		AMIGAHW_SET(A4000_SCSI);
+		/* fall through */
+	case AMI_4000:
+		AMIGAHW_SET(A4000_IDE);
+		AMIGAHW_SET(A3000_CLK);
+		AMIGAHW_SET(ZORRO3);
+		goto Generic;
+
+	case AMI_CDTV:
+	case AMI_CD32:
+		AMIGAHW_SET(CD_ROM);
+		AMIGAHW_SET(A2000_CLK);             /* Is this correct? */
+		goto Generic;
+
+	Generic:
+		AMIGAHW_SET(AMI_VIDEO);
+		AMIGAHW_SET(AMI_BLITTER);
+		AMIGAHW_SET(AMI_AUDIO);
+		AMIGAHW_SET(AMI_FLOPPY);
+		AMIGAHW_SET(AMI_KEYBOARD);
+		AMIGAHW_SET(AMI_MOUSE);
+		AMIGAHW_SET(AMI_SERIAL);
+		AMIGAHW_SET(AMI_PARALLEL);
+		AMIGAHW_SET(CHIP_RAM);
+		AMIGAHW_SET(PAULA);
+
+		switch (amiga_chipset) {
+		case CS_OCS:
+		case CS_ECS:
+		case CS_AGA:
+			switch (amiga_custom.deniseid & 0xf) {
+			case 0x0c:
+				AMIGAHW_SET(DENISE_HR);
+				break;
+			case 0x08:
+				AMIGAHW_SET(LISA);
+				break;
+			}
+			break;
+		default:
+			AMIGAHW_SET(DENISE);
+			break;
+		}
+		switch ((amiga_custom.vposr>>8) & 0x7f) {
+		case 0x00:
+			AMIGAHW_SET(AGNUS_PAL);
+			break;
+		case 0x10:
+			AMIGAHW_SET(AGNUS_NTSC);
+			break;
+		case 0x20:
+		case 0x21:
+			AMIGAHW_SET(AGNUS_HR_PAL);
+			break;
+		case 0x30:
+		case 0x31:
+			AMIGAHW_SET(AGNUS_HR_NTSC);
+			break;
+		case 0x22:
+		case 0x23:
+			AMIGAHW_SET(ALICE_PAL);
+			break;
+		case 0x32:
+		case 0x33:
+			AMIGAHW_SET(ALICE_NTSC);
+			break;
+		}
+		AMIGAHW_SET(ZORRO);
+		break;
+
+	case AMI_DRACO:
+		panic("No support for Draco yet");
+
+	default:
+		panic("Unknown Amiga Model");
+	}
+
+#define AMIGAHW_ANNOUNCE(name, str)		\
+	if (AMIGAHW_PRESENT(name))		\
+		pr_cont(str)
+
+	AMIGAHW_ANNOUNCE(AMI_VIDEO, "VIDEO ");
+	AMIGAHW_ANNOUNCE(AMI_BLITTER, "BLITTER ");
+	AMIGAHW_ANNOUNCE(AMBER_FF, "AMBER_FF ");
+	AMIGAHW_ANNOUNCE(AMI_AUDIO, "AUDIO ");
+	AMIGAHW_ANNOUNCE(AMI_FLOPPY, "FLOPPY ");
+	AMIGAHW_ANNOUNCE(A3000_SCSI, "A3000_SCSI ");
+	AMIGAHW_ANNOUNCE(A4000_SCSI, "A4000_SCSI ");
+	AMIGAHW_ANNOUNCE(A1200_IDE, "A1200_IDE ");
+	AMIGAHW_ANNOUNCE(A4000_IDE, "A4000_IDE ");
+	AMIGAHW_ANNOUNCE(CD_ROM, "CD_ROM ");
+	AMIGAHW_ANNOUNCE(AMI_KEYBOARD, "KEYBOARD ");
+	AMIGAHW_ANNOUNCE(AMI_MOUSE, "MOUSE ");
+	AMIGAHW_ANNOUNCE(AMI_SERIAL, "SERIAL ");
+	AMIGAHW_ANNOUNCE(AMI_PARALLEL, "PARALLEL ");
+	AMIGAHW_ANNOUNCE(A2000_CLK, "A2000_CLK ");
+	AMIGAHW_ANNOUNCE(A3000_CLK, "A3000_CLK ");
+	AMIGAHW_ANNOUNCE(CHIP_RAM, "CHIP_RAM ");
+	AMIGAHW_ANNOUNCE(PAULA, "PAULA ");
+	AMIGAHW_ANNOUNCE(DENISE, "DENISE ");
+	AMIGAHW_ANNOUNCE(DENISE_HR, "DENISE_HR ");
+	AMIGAHW_ANNOUNCE(LISA, "LISA ");
+	AMIGAHW_ANNOUNCE(AGNUS_PAL, "AGNUS_PAL ");
+	AMIGAHW_ANNOUNCE(AGNUS_NTSC, "AGNUS_NTSC ");
+	AMIGAHW_ANNOUNCE(AGNUS_HR_PAL, "AGNUS_HR_PAL ");
+	AMIGAHW_ANNOUNCE(AGNUS_HR_NTSC, "AGNUS_HR_NTSC ");
+	AMIGAHW_ANNOUNCE(ALICE_PAL, "ALICE_PAL ");
+	AMIGAHW_ANNOUNCE(ALICE_NTSC, "ALICE_NTSC ");
+	AMIGAHW_ANNOUNCE(MAGIC_REKICK, "MAGIC_REKICK ");
+	AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA ");
+	if (AMIGAHW_PRESENT(ZORRO))
+		pr_cont("ZORRO%s ", AMIGAHW_PRESENT(ZORRO3) ? "3" : "");
+	pr_cont("\n");
 
 #undef AMIGAHW_ANNOUNCE
 }
 
+
+static unsigned long amiga_random_get_entropy(void)
+{
+	/* VPOSR/VHPOSR provide at least 17 bits of data changing at 1.79 MHz */
+	return *(unsigned long *)&amiga_custom.vposr;
+}
+
+
     /*
      *  Setup the Amiga configuration info
      */
 
 void __init config_amiga(void)
 {
-  int i;
-
-  amiga_debug_init();
-  amiga_identify();
-
-  /* Yuk, we don't have PCI memory */
-  iomem_resource.name = "Memory";
-  for (i = 0; i < 4; i++)
-    request_resource(&iomem_resource, &((struct resource *)&mb_resources)[i]);
-
-  mach_sched_init      = amiga_sched_init;
-  mach_init_IRQ        = amiga_init_IRQ;
-  mach_default_handler = &amiga_default_handler;
-  mach_request_irq     = amiga_request_irq;
-  mach_free_irq        = amiga_free_irq;
-  enable_irq           = amiga_enable_irq;
-  disable_irq          = amiga_disable_irq;
-  mach_get_model       = amiga_get_model;
-  mach_get_hardware_list = amiga_get_hardware_list;
-  mach_get_irq_list    = show_amiga_interrupts;
-  mach_gettimeoffset   = amiga_gettimeoffset;
-  if (AMIGAHW_PRESENT(A3000_CLK)){
-    mach_hwclk         = a3000_hwclk;
-    rtc_resource.name = "A3000 RTC";
-    request_resource(&iomem_resource, &rtc_resource);
-  }
-  else{ /* if (AMIGAHW_PRESENT(A2000_CLK)) */
-    mach_hwclk         = a2000_hwclk;
-    rtc_resource.name = "A2000 RTC";
-    request_resource(&iomem_resource, &rtc_resource);
-  }
-
-  mach_max_dma_address = 0xffffffff; /*
-				      * default MAX_DMA=0xffffffff
-				      * on all machines. If we don't
-				      * do so, the SCSI code will not
-				      * be able to allocate any mem
-				      * for transfers, unless we are
-				      * dealing with a Z2 mem only
-				      * system.                  /Jes
-				      */
-
-  mach_set_clock_mmss  = amiga_set_clock_mmss;
-  mach_get_ss          = amiga_get_ss;
-#ifdef CONFIG_AMIGA_FLOPPY
-  mach_floppy_setup    = amiga_floppy_setup;
-#endif
-  mach_reset           = amiga_reset;
-#ifdef CONFIG_DUMMY_CONSOLE
-  conswitchp           = &dummy_con;
-#endif
+	int i;
+
+	amiga_identify();
+
+	/* Yuk, we don't have PCI memory */
+	iomem_resource.name = "Memory";
+	for (i = 0; i < 4; i++)
+		request_resource(&iomem_resource, &((struct resource *)&mb_resources)[i]);
+
+	mach_sched_init      = amiga_sched_init;
+	mach_init_IRQ        = amiga_init_IRQ;
+	mach_get_model       = amiga_get_model;
+	mach_get_hardware_list = amiga_get_hardware_list;
+	arch_gettimeoffset   = amiga_gettimeoffset;
+
+	/*
+	 * default MAX_DMA=0xffffffff on all machines. If we don't do so, the SCSI
+	 * code will not be able to allocate any mem for transfers, unless we are
+	 * dealing with a Z2 mem only system.                  /Jes
+	 */
+	mach_max_dma_address = 0xffffffff;
+
+	mach_reset           = amiga_reset;
 #if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
-  mach_beep            = amiga_mksound;
+	mach_beep            = amiga_mksound;
 #endif
 
 #ifdef CONFIG_HEARTBEAT
-  mach_heartbeat = amiga_heartbeat;
+	mach_heartbeat = amiga_heartbeat;
 #endif
 
-  /* Fill in the clock values (based on the 700 kHz E-Clock) */
-  amiga_masterclock = 40*amiga_eclock;	/* 28 MHz */
-  amiga_colorclock = 5*amiga_eclock;	/* 3.5 MHz */
-
-  /* clear all DMA bits */
-  amiga_custom.dmacon = DMAF_ALL;
-  /* ensure that the DMA master bit is set */
-  amiga_custom.dmacon = DMAF_SETCLR | DMAF_MASTER;
-
-  /* don't use Z2 RAM as system memory on Z3 capable machines */
-  if (AMIGAHW_PRESENT(ZORRO3)) {
-    int i, j;
-    u32 disabled_z2mem = 0;
-    for (i = 0; i < m68k_num_memory; i++)
-      if (m68k_memory[i].addr < 16*1024*1024) {
-	if (i == 0) {
-	  /* don't cut off the branch we're sitting on */
-	  printk("Warning: kernel runs in Zorro II memory\n");
-	  continue;
+	mach_random_get_entropy = amiga_random_get_entropy;
+
+	/* Fill in the clock value (based on the 700 kHz E-Clock) */
+	amiga_colorclock = 5*amiga_eclock;	/* 3.5 MHz */
+
+	/* clear all DMA bits */
+	amiga_custom.dmacon = DMAF_ALL;
+	/* ensure that the DMA master bit is set */
+	amiga_custom.dmacon = DMAF_SETCLR | DMAF_MASTER;
+
+	/* don't use Z2 RAM as system memory on Z3 capable machines */
+	if (AMIGAHW_PRESENT(ZORRO3)) {
+		int i, j;
+		u32 disabled_z2mem = 0;
+
+		for (i = 0; i < m68k_num_memory; i++) {
+			if (m68k_memory[i].addr < 16*1024*1024) {
+				if (i == 0) {
+					/* don't cut off the branch we're sitting on */
+					pr_warn("Warning: kernel runs in Zorro II memory\n");
+					continue;
+				}
+				disabled_z2mem += m68k_memory[i].size;
+				m68k_num_memory--;
+				for (j = i; j < m68k_num_memory; j++)
+					m68k_memory[j] = m68k_memory[j+1];
+				i--;
+			}
+		}
+		if (disabled_z2mem)
+			pr_info("%dK of Zorro II memory will not be used as system memory\n",
+				disabled_z2mem>>10);
 	}
-	disabled_z2mem += m68k_memory[i].size;
-	m68k_num_memory--;
-	for (j = i; j < m68k_num_memory; j++)
-	  m68k_memory[j] = m68k_memory[j+1];
-	i--;
-      }
-    if (disabled_z2mem)
-      printk("%dK of Zorro II memory will not be used as system memory\n",
-	     disabled_z2mem>>10);
-  }
-
-  /* request all RAM */
-  for (i = 0; i < m68k_num_memory; i++) {
-    ram_resource[i].name =
-      (m68k_memory[i].addr >= 0x01000000) ? "32-bit Fast RAM" :
-      (m68k_memory[i].addr < 0x00c00000) ? "16-bit Fast RAM" :
-      "16-bit Slow RAM";
-    ram_resource[i].start = m68k_memory[i].addr;
-    ram_resource[i].end = m68k_memory[i].addr+m68k_memory[i].size-1;
-    request_resource(&iomem_resource, &ram_resource[i]);
-  }
-
-  /* initialize chipram allocator */
-  amiga_chip_init ();
-
-  /* debugging using chipram */
-  if (!strcmp( m68k_debug_device, "mem" )){
-	  if (!AMIGAHW_PRESENT(CHIP_RAM))
-		  printk("Warning: no chipram present for debugging\n");
-	  else {
-		  amiga_savekmsg_init();
-		  amiga_console_driver.write = amiga_mem_console_write;
-		  register_console(&amiga_console_driver);
-	  }
-  }
-
-  /* our beloved beeper */
-  if (AMIGAHW_PRESENT(AMI_AUDIO))
-	  amiga_init_sound();
-
-  /*
-   * if it is an A3000, set the magic bit that forces
-   * a hard rekick
-   */
-  if (AMIGAHW_PRESENT(MAGIC_REKICK))
-	  *(unsigned char *)ZTWO_VADDR(0xde0002) |= 0x80;
+
+	/* request all RAM */
+	for (i = 0; i < m68k_num_memory; i++) {
+		ram_resource[i].name =
+			(m68k_memory[i].addr >= 0x01000000) ? "32-bit Fast RAM" :
+			(m68k_memory[i].addr < 0x00c00000) ? "16-bit Fast RAM" :
+			"16-bit Slow RAM";
+		ram_resource[i].start = m68k_memory[i].addr;
+		ram_resource[i].end = m68k_memory[i].addr+m68k_memory[i].size-1;
+		request_resource(&iomem_resource, &ram_resource[i]);
+	}
+
+	/* initialize chipram allocator */
+	amiga_chip_init();
+
+	/* our beloved beeper */
+	if (AMIGAHW_PRESENT(AMI_AUDIO))
+		amiga_init_sound();
+
+	/*
+	 * if it is an A3000, set the magic bit that forces
+	 * a hard rekick
+	 */
+	if (AMIGAHW_PRESENT(MAGIC_REKICK))
+		*(unsigned char *)ZTWO_VADDR(0xde0002) |= 0x80;
 }
 
 static unsigned short jiffy_ticks;
 
-static void __init amiga_sched_init(irqreturn_t (*timer_routine)(int, void *,
-							  struct pt_regs *))
+static void __init amiga_sched_init(irq_handler_t timer_routine)
 {
 	static struct resource sched_res = {
-	    .name = "timer", .start = 0x00bfd400, .end = 0x00bfd5ff,
+		.name = "timer", .start = 0x00bfd400, .end = 0x00bfd5ff,
 	};
-	jiffy_ticks = (amiga_eclock+HZ/2)/HZ;
+	jiffy_ticks = DIV_ROUND_CLOSEST(amiga_eclock, HZ);
 
 	if (request_resource(&mb_resources._ciab, &sched_res))
-	    printk("Cannot allocate ciab.ta{lo,hi}\n");
+		pr_warn("Cannot allocate ciab.ta{lo,hi}\n");
 	ciab.cra &= 0xC0;   /* turn off timer A, continuous mode, from Eclk */
 	ciab.talo = jiffy_ticks % 256;
 	ciab.tahi = jiffy_ticks / 256;
@@ -531,7 +485,8 @@ static void __init amiga_sched_init(irqreturn_t (*timer_routine)(int, void *,
 	 * Please don't change this to use ciaa, as it interferes with the
 	 * SCSI code. We'll have to take a look at this later
 	 */
-	request_irq(IRQ_AMIGA_CIAB_TA, timer_routine, 0, "timer", NULL);
+	if (request_irq(IRQ_AMIGA_CIAB_TA, timer_routine, 0, "timer", NULL))
+		pr_err("Couldn't register timer interrupt\n");
 	/* start timer */
 	ciab.cra |= 0x11;
 }
@@ -539,10 +494,10 @@ static void __init amiga_sched_init(irqreturn_t (*timer_routine)(int, void *,
 #define TICK_SIZE 10000
 
 /* This is always executed with interrupts disabled.  */
-static unsigned long amiga_gettimeoffset (void)
+static u32 amiga_gettimeoffset(void)
 {
 	unsigned short hi, lo, hi2;
-	unsigned long ticks, offset = 0;
+	u32 ticks, offset = 0;
 
 	/* read CIA B timer A current value */
 	hi  = ciab.tahi;
@@ -564,228 +519,74 @@ static unsigned long amiga_gettimeoffset (void)
 	ticks = jiffy_ticks - ticks;
 	ticks = (10000 * ticks) / jiffy_ticks;
 
-	return ticks + offset;
-}
-
-static int a3000_hwclk(int op, struct rtc_time *t)
-{
-	tod_3000.cntrl1 = TOD3000_CNTRL1_HOLD;
-
-	if (!op) { /* read */
-		t->tm_sec  = tod_3000.second1 * 10 + tod_3000.second2;
-		t->tm_min  = tod_3000.minute1 * 10 + tod_3000.minute2;
-		t->tm_hour = tod_3000.hour1   * 10 + tod_3000.hour2;
-		t->tm_mday = tod_3000.day1    * 10 + tod_3000.day2;
-		t->tm_wday = tod_3000.weekday;
-		t->tm_mon  = tod_3000.month1  * 10 + tod_3000.month2 - 1;
-		t->tm_year = tod_3000.year1   * 10 + tod_3000.year2;
-		if (t->tm_year <= 69)
-			t->tm_year += 100;
-	} else {
-		tod_3000.second1 = t->tm_sec / 10;
-		tod_3000.second2 = t->tm_sec % 10;
-		tod_3000.minute1 = t->tm_min / 10;
-		tod_3000.minute2 = t->tm_min % 10;
-		tod_3000.hour1   = t->tm_hour / 10;
-		tod_3000.hour2   = t->tm_hour % 10;
-		tod_3000.day1    = t->tm_mday / 10;
-		tod_3000.day2    = t->tm_mday % 10;
-		if (t->tm_wday != -1)
-			tod_3000.weekday = t->tm_wday;
-		tod_3000.month1  = (t->tm_mon + 1) / 10;
-		tod_3000.month2  = (t->tm_mon + 1) % 10;
-		if (t->tm_year >= 100)
-			t->tm_year -= 100;
-		tod_3000.year1   = t->tm_year / 10;
-		tod_3000.year2   = t->tm_year % 10;
-	}
-
-	tod_3000.cntrl1 = TOD3000_CNTRL1_FREE;
-
-	return 0;
-}
-
-static int a2000_hwclk(int op, struct rtc_time *t)
-{
-	int cnt = 5;
-
-	tod_2000.cntrl1 = TOD2000_CNTRL1_HOLD;
-
-	while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt--)
-	{
-	        tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
-	        udelay(70);
-	        tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
-	}
-
-	if (!cnt)
-		printk(KERN_INFO "hwclk: timed out waiting for RTC (0x%x)\n", tod_2000.cntrl1);
-
-	if (!op) { /* read */
-		t->tm_sec  = tod_2000.second1     * 10 + tod_2000.second2;
-		t->tm_min  = tod_2000.minute1     * 10 + tod_2000.minute2;
-		t->tm_hour = (tod_2000.hour1 & 3) * 10 + tod_2000.hour2;
-		t->tm_mday = tod_2000.day1        * 10 + tod_2000.day2;
-		t->tm_wday = tod_2000.weekday;
-		t->tm_mon  = tod_2000.month1      * 10 + tod_2000.month2 - 1;
-		t->tm_year = tod_2000.year1       * 10 + tod_2000.year2;
-		if (t->tm_year <= 69)
-			t->tm_year += 100;
-
-		if (!(tod_2000.cntrl3 & TOD2000_CNTRL3_24HMODE)){
-			if (!(tod_2000.hour1 & TOD2000_HOUR1_PM) && t->tm_hour == 12)
-				t->tm_hour = 0;
-			else if ((tod_2000.hour1 & TOD2000_HOUR1_PM) && t->tm_hour != 12)
-				t->tm_hour += 12;
-		}
-	} else {
-		tod_2000.second1 = t->tm_sec / 10;
-		tod_2000.second2 = t->tm_sec % 10;
-		tod_2000.minute1 = t->tm_min / 10;
-		tod_2000.minute2 = t->tm_min % 10;
-		if (tod_2000.cntrl3 & TOD2000_CNTRL3_24HMODE)
-			tod_2000.hour1 = t->tm_hour / 10;
-		else if (t->tm_hour >= 12)
-			tod_2000.hour1 = TOD2000_HOUR1_PM +
-				(t->tm_hour - 12) / 10;
-		else
-			tod_2000.hour1 = t->tm_hour / 10;
-		tod_2000.hour2   = t->tm_hour % 10;
-		tod_2000.day1    = t->tm_mday / 10;
-		tod_2000.day2    = t->tm_mday % 10;
-		if (t->tm_wday != -1)
-			tod_2000.weekday = t->tm_wday;
-		tod_2000.month1  = (t->tm_mon + 1) / 10;
-		tod_2000.month2  = (t->tm_mon + 1) % 10;
-		if (t->tm_year >= 100)
-			t->tm_year -= 100;
-		tod_2000.year1   = t->tm_year / 10;
-		tod_2000.year2   = t->tm_year % 10;
-	}
-
-	tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
-
-	return 0;
+	return (ticks + offset) * 1000;
 }
 
-static int amiga_set_clock_mmss (unsigned long nowtime)
-{
-	short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
-
-	if (AMIGAHW_PRESENT(A3000_CLK)) {
-		tod_3000.cntrl1 = TOD3000_CNTRL1_HOLD;
+static void amiga_reset(void)  __noreturn;
 
-		tod_3000.second1 = real_seconds / 10;
-		tod_3000.second2 = real_seconds % 10;
-		tod_3000.minute1 = real_minutes / 10;
-		tod_3000.minute2 = real_minutes % 10;
-
-		tod_3000.cntrl1 = TOD3000_CNTRL1_FREE;
-	} else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ {
-		int cnt = 5;
-
-		tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
-
-		while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt--)
-		{
-			tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
-			udelay(70);
-			tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
-		}
-
-		if (!cnt)
-			printk(KERN_INFO "set_clock_mmss: timed out waiting for RTC (0x%x)\n", tod_2000.cntrl1);
-
-		tod_2000.second1 = real_seconds / 10;
-		tod_2000.second2 = real_seconds % 10;
-		tod_2000.minute1 = real_minutes / 10;
-		tod_2000.minute2 = real_minutes % 10;
-
-		tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
-	}
-
-	return 0;
-}
-
-static unsigned int amiga_get_ss( void )
+static void amiga_reset(void)
 {
-	unsigned int s;
-
-	if (AMIGAHW_PRESENT(A3000_CLK)) {
-		tod_3000.cntrl1 = TOD3000_CNTRL1_HOLD;
-		s = tod_3000.second1 * 10 + tod_3000.second2;
-		tod_3000.cntrl1 = TOD3000_CNTRL1_FREE;
-	} else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ {
-		s = tod_2000.second1 * 10 + tod_2000.second2;
-	}
-	return s;
-}
-
-static NORET_TYPE void amiga_reset( void )
-    ATTRIB_NORET;
-
-static void amiga_reset (void)
-{
-  unsigned long jmp_addr040 = virt_to_phys(&&jmp_addr_label040);
-  unsigned long jmp_addr = virt_to_phys(&&jmp_addr_label);
-
-  local_irq_disable();
-  if (CPU_IS_040_OR_060)
-    /* Setup transparent translation registers for mapping
-     * of 16 MB kernel segment before disabling translation
-     */
-    __asm__ __volatile__
-      ("movel    %0,%/d0\n\t"
-       "andl     #0xff000000,%/d0\n\t"
-       "orw      #0xe020,%/d0\n\t"   /* map 16 MB, enable, cacheable */
-       ".chip    68040\n\t"
-       "movec    %%d0,%%itt0\n\t"
-       "movec    %%d0,%%dtt0\n\t"
-       ".chip    68k\n\t"
-       "jmp      %0@\n\t"
-       : /* no outputs */
-       : "a" (jmp_addr040));
-  else
-    /* for 680[23]0, just disable translation and jump to the physical
-     * address of the label
-     */
-    __asm__ __volatile__
-      ("pmove  %/tc,%@\n\t"
-       "bclr   #7,%@\n\t"
-       "pmove  %@,%/tc\n\t"
-       "jmp    %0@\n\t"
-       : /* no outputs */
-       : "a" (jmp_addr));
- jmp_addr_label040:
-  /* disable translation on '040 now */
-  __asm__ __volatile__
-    ("moveq #0,%/d0\n\t"
-     ".chip 68040\n\t"
-     "movec %%d0,%%tc\n\t"	/* disable MMU */
-     ".chip 68k\n\t"
-     : /* no outputs */
-     : /* no inputs */
-     : "d0");
-
- jmp_addr_label:
-  /* pickup reset address from AmigaOS ROM, reset devices and jump
-   * to reset address
-   */
-  __asm__ __volatile__
-    ("movew #0x2700,%/sr\n\t"
-     "leal  0x01000000,%/a0\n\t"
-     "subl  %/a0@(-0x14),%/a0\n\t"
-     "movel %/a0@(4),%/a0\n\t"
-     "subql #2,%/a0\n\t"
-     "bra   1f\n\t"
-     /* align on a longword boundary */
-     __ALIGN_STR "\n"
-     "1:\n\t"
-     "reset\n\t"
-     "jmp   %/a0@" : /* Just that gcc scans it for % escapes */ );
-
-  for (;;);
-
+	unsigned long jmp_addr040 = virt_to_phys(&&jmp_addr_label040);
+	unsigned long jmp_addr = virt_to_phys(&&jmp_addr_label);
+
+	local_irq_disable();
+	if (CPU_IS_040_OR_060)
+		/* Setup transparent translation registers for mapping
+		 * of 16 MB kernel segment before disabling translation
+		 */
+		asm volatile ("\n"
+			"	move.l	%0,%%d0\n"
+			"	and.l	#0xff000000,%%d0\n"
+			"	or.w	#0xe020,%%d0\n"   /* map 16 MB, enable, cacheable */
+			"	.chip	68040\n"
+			"	movec	%%d0,%%itt0\n"
+			"	movec	%%d0,%%dtt0\n"
+			"	.chip	68k\n"
+			"	jmp	%0@\n"
+			: /* no outputs */
+			: "a" (jmp_addr040)
+			: "d0");
+	else
+		/* for 680[23]0, just disable translation and jump to the physical
+		 * address of the label
+		 */
+		asm volatile ("\n"
+			"	pmove	%%tc,%@\n"
+			"	bclr	#7,%@\n"
+			"	pmove	%@,%%tc\n"
+			"	jmp	%0@\n"
+			: /* no outputs */
+			: "a" (jmp_addr));
+jmp_addr_label040:
+	/* disable translation on '040 now */
+	asm volatile ("\n"
+		"	moveq	#0,%%d0\n"
+		"	.chip	68040\n"
+		"	movec	%%d0,%%tc\n"	/* disable MMU */
+		"	.chip	68k\n"
+		: /* no outputs */
+		: /* no inputs */
+		: "d0");
+
+	jmp_addr_label:
+	/* pickup reset address from AmigaOS ROM, reset devices and jump
+	 * to reset address
+	 */
+	asm volatile ("\n"
+		"	move.w	#0x2700,%sr\n"
+		"	lea	0x01000000,%a0\n"
+		"	sub.l	%a0@(-0x14),%a0\n"
+		"	move.l	%a0@(4),%a0\n"
+		"	subq.l	#2,%a0\n"
+		"	jra	1f\n"
+		/* align on a longword boundary */
+		"	" __ALIGN_STR "\n"
+		"1:\n"
+		"	reset\n"
+		"	jmp   %a0@");
+
+	for (;;)
+		;
 }
 
 
@@ -799,11 +600,11 @@ static void amiga_reset (void)
 #define SAVEKMSG_MAGIC2		0x4B4D5347	/* 'KMSG' */
 
 struct savekmsg {
-    unsigned long magic1;		/* SAVEKMSG_MAGIC1 */
-    unsigned long magic2;		/* SAVEKMSG_MAGIC2 */
-    unsigned long magicptr;		/* address of magic1 */
-    unsigned long size;
-    char data[0];
+	unsigned long magic1;		/* SAVEKMSG_MAGIC1 */
+	unsigned long magic2;		/* SAVEKMSG_MAGIC2 */
+	unsigned long magicptr;		/* address of magic1 */
+	unsigned long size;
+	char data[0];
 };
 
 static struct savekmsg *savekmsg;
@@ -811,113 +612,139 @@ static struct savekmsg *savekmsg;
 static void amiga_mem_console_write(struct console *co, const char *s,
 				    unsigned int count)
 {
-    if (savekmsg->size+count <= SAVEKMSG_MAXMEM-sizeof(struct savekmsg)) {
-        memcpy(savekmsg->data+savekmsg->size, s, count);
-        savekmsg->size += count;
-    }
+	if (savekmsg->size + count <= SAVEKMSG_MAXMEM-sizeof(struct savekmsg)) {
+		memcpy(savekmsg->data + savekmsg->size, s, count);
+		savekmsg->size += count;
+	}
 }
 
-static void amiga_savekmsg_init(void)
+static int __init amiga_savekmsg_setup(char *arg)
 {
-    static struct resource debug_res = { .name = "Debug" };
+	bool registered;
 
-    savekmsg = amiga_chip_alloc_res(SAVEKMSG_MAXMEM, &debug_res);
-    savekmsg->magic1 = SAVEKMSG_MAGIC1;
-    savekmsg->magic2 = SAVEKMSG_MAGIC2;
-    savekmsg->magicptr = ZTWO_PADDR(savekmsg);
-    savekmsg->size = 0;
+	if (!MACH_IS_AMIGA || strcmp(arg, "mem"))
+		return 0;
+
+	if (amiga_chip_size < SAVEKMSG_MAXMEM) {
+		pr_err("Not enough chipram for debugging\n");
+		return -ENOMEM;
+	}
+
+	/* Just steal the block, the chipram allocator isn't functional yet */
+	amiga_chip_size -= SAVEKMSG_MAXMEM;
+	savekmsg = ZTWO_VADDR(CHIP_PHYSADDR + amiga_chip_size);
+	savekmsg->magic1 = SAVEKMSG_MAGIC1;
+	savekmsg->magic2 = SAVEKMSG_MAGIC2;
+	savekmsg->magicptr = ZTWO_PADDR(savekmsg);
+	savekmsg->size = 0;
+
+	registered = !!amiga_console_driver.write;
+	amiga_console_driver.write = amiga_mem_console_write;
+	if (!registered)
+		register_console(&amiga_console_driver);
+	return 0;
 }
 
+early_param("debug", amiga_savekmsg_setup);
+
 static void amiga_serial_putc(char c)
 {
-    amiga_custom.serdat = (unsigned char)c | 0x100;
-    while (!(amiga_custom.serdatr & 0x2000))
-	;
+	amiga_custom.serdat = (unsigned char)c | 0x100;
+	while (!(amiga_custom.serdatr & 0x2000))
+		;
 }
 
-void amiga_serial_console_write(struct console *co, const char *s,
+static void amiga_serial_console_write(struct console *co, const char *s,
 				       unsigned int count)
 {
-    while (count--) {
-	if (*s == '\n')
-	    amiga_serial_putc('\r');
-	amiga_serial_putc(*s++);
-    }
+	while (count--) {
+		if (*s == '\n')
+			amiga_serial_putc('\r');
+		amiga_serial_putc(*s++);
+	}
 }
 
-#ifdef CONFIG_SERIAL_CONSOLE
+#if 0
 void amiga_serial_puts(const char *s)
 {
-    amiga_serial_console_write(NULL, s, strlen(s));
+	amiga_serial_console_write(NULL, s, strlen(s));
 }
 
 int amiga_serial_console_wait_key(struct console *co)
 {
-    int ch;
-
-    while (!(amiga_custom.intreqr & IF_RBF))
-	barrier();
-    ch = amiga_custom.serdatr & 0xff;
-    /* clear the interrupt, so that another character can be read */
-    amiga_custom.intreq = IF_RBF;
-    return ch;
+	int ch;
+
+	while (!(amiga_custom.intreqr & IF_RBF))
+		barrier();
+	ch = amiga_custom.serdatr & 0xff;
+	/* clear the interrupt, so that another character can be read */
+	amiga_custom.intreq = IF_RBF;
+	return ch;
 }
 
 void amiga_serial_gets(struct console *co, char *s, int len)
 {
-    int ch, cnt = 0;
-
-    while (1) {
-	ch = amiga_serial_console_wait_key(co);
-
-	/* Check for backspace. */
-	if (ch == 8 || ch == 127) {
-	    if (cnt == 0) {
-		amiga_serial_putc('\007');
-		continue;
-	    }
-	    cnt--;
-	    amiga_serial_puts("\010 \010");
-	    continue;
-	}
+	int ch, cnt = 0;
+
+	while (1) {
+		ch = amiga_serial_console_wait_key(co);
+
+		/* Check for backspace. */
+		if (ch == 8 || ch == 127) {
+			if (cnt == 0) {
+				amiga_serial_putc('\007');
+				continue;
+			}
+			cnt--;
+			amiga_serial_puts("\010 \010");
+			continue;
+		}
 
-	/* Check for enter. */
-	if (ch == 10 || ch == 13)
-	    break;
+		/* Check for enter. */
+		if (ch == 10 || ch == 13)
+			break;
 
-	/* See if line is too long. */
-	if (cnt >= len + 1) {
-	    amiga_serial_putc(7);
-	    cnt--;
-	    continue;
-	}
+		/* See if line is too long. */
+		if (cnt >= len + 1) {
+			amiga_serial_putc(7);
+			cnt--;
+			continue;
+		}
 
-	/* Store and echo character. */
-	s[cnt++] = ch;
-	amiga_serial_putc(ch);
-    }
-    /* Print enter. */
-    amiga_serial_puts("\r\n");
-    s[cnt] = 0;
+		/* Store and echo character. */
+		s[cnt++] = ch;
+		amiga_serial_putc(ch);
+	}
+	/* Print enter. */
+	amiga_serial_puts("\r\n");
+	s[cnt] = 0;
 }
 #endif
 
-static void __init amiga_debug_init(void)
+static int __init amiga_debug_setup(char *arg)
 {
-	if (!strcmp( m68k_debug_device, "ser" )) {
-		/* no initialization required (?) */
-		amiga_console_driver.write = amiga_serial_console_write;
+	bool registered;
+
+	if (!MACH_IS_AMIGA || strcmp(arg, "ser"))
+		return 0;
+
+	/* no initialization required (?) */
+	registered = !!amiga_console_driver.write;
+	amiga_console_driver.write = amiga_serial_console_write;
+	if (!registered)
 		register_console(&amiga_console_driver);
-	}
+	return 0;
 }
 
+early_param("debug", amiga_debug_setup);
+
 #ifdef CONFIG_HEARTBEAT
 static void amiga_heartbeat(int on)
 {
-    if (on)
-	ciaa.pra &= ~2;
-    else
-	ciaa.pra |= 2;
+	if (on)
+		ciaa.pra &= ~2;
+	else
+		ciaa.pra |= 2;
 }
 #endif
 
@@ -927,81 +754,85 @@ static void amiga_heartbeat(int on)
 
 static void amiga_get_model(char *model)
 {
-    strcpy(model, amiga_model_name);
+	strcpy(model, amiga_model_name);
 }
 
 
-static int amiga_get_hardware_list(char *buffer)
+static void amiga_get_hardware_list(struct seq_file *m)
 {
-    int len = 0;
-
-    if (AMIGAHW_PRESENT(CHIP_RAM))
-	len += sprintf(buffer+len, "Chip RAM:\t%ldK\n", amiga_chip_size>>10);
-    len += sprintf(buffer+len, "PS Freq:\t%dHz\nEClock Freq:\t%ldHz\n",
-		   amiga_psfreq, amiga_eclock);
-    if (AMIGAHW_PRESENT(AMI_VIDEO)) {
-	char *type;
-	switch(amiga_chipset) {
-	    case CS_OCS:
-		type = "OCS";
-		break;
-	    case CS_ECS:
-		type = "ECS";
-		break;
-	    case CS_AGA:
-		type = "AGA";
-		break;
-	    default:
-		type = "Old or Unknown";
-		break;
+	if (AMIGAHW_PRESENT(CHIP_RAM))
+		seq_printf(m, "Chip RAM:\t%ldK\n", amiga_chip_size>>10);
+	seq_printf(m, "PS Freq:\t%dHz\nEClock Freq:\t%ldHz\n",
+			amiga_psfreq, amiga_eclock);
+	if (AMIGAHW_PRESENT(AMI_VIDEO)) {
+		char *type;
+		switch (amiga_chipset) {
+		case CS_OCS:
+			type = "OCS";
+			break;
+		case CS_ECS:
+			type = "ECS";
+			break;
+		case CS_AGA:
+			type = "AGA";
+			break;
+		default:
+			type = "Old or Unknown";
+			break;
+		}
+		seq_printf(m, "Graphics:\t%s\n", type);
 	}
-	len += sprintf(buffer+len, "Graphics:\t%s\n", type);
-    }
 
 #define AMIGAHW_ANNOUNCE(name, str)			\
-    if (AMIGAHW_PRESENT(name))				\
-	len += sprintf (buffer+len, "\t%s\n", str)
-
-    len += sprintf (buffer + len, "Detected hardware:\n");
-
-    AMIGAHW_ANNOUNCE(AMI_VIDEO, "Amiga Video");
-    AMIGAHW_ANNOUNCE(AMI_BLITTER, "Blitter");
-    AMIGAHW_ANNOUNCE(AMBER_FF, "Amber Flicker Fixer");
-    AMIGAHW_ANNOUNCE(AMI_AUDIO, "Amiga Audio");
-    AMIGAHW_ANNOUNCE(AMI_FLOPPY, "Floppy Controller");
-    AMIGAHW_ANNOUNCE(A3000_SCSI, "SCSI Controller WD33C93 (A3000 style)");
-    AMIGAHW_ANNOUNCE(A4000_SCSI, "SCSI Controller NCR53C710 (A4000T style)");
-    AMIGAHW_ANNOUNCE(A1200_IDE, "IDE Interface (A1200 style)");
-    AMIGAHW_ANNOUNCE(A4000_IDE, "IDE Interface (A4000 style)");
-    AMIGAHW_ANNOUNCE(CD_ROM, "Internal CD ROM drive");
-    AMIGAHW_ANNOUNCE(AMI_KEYBOARD, "Keyboard");
-    AMIGAHW_ANNOUNCE(AMI_MOUSE, "Mouse Port");
-    AMIGAHW_ANNOUNCE(AMI_SERIAL, "Serial Port");
-    AMIGAHW_ANNOUNCE(AMI_PARALLEL, "Parallel Port");
-    AMIGAHW_ANNOUNCE(A2000_CLK, "Hardware Clock (A2000 style)");
-    AMIGAHW_ANNOUNCE(A3000_CLK, "Hardware Clock (A3000 style)");
-    AMIGAHW_ANNOUNCE(CHIP_RAM, "Chip RAM");
-    AMIGAHW_ANNOUNCE(PAULA, "Paula 8364");
-    AMIGAHW_ANNOUNCE(DENISE, "Denise 8362");
-    AMIGAHW_ANNOUNCE(DENISE_HR, "Denise 8373");
-    AMIGAHW_ANNOUNCE(LISA, "Lisa 8375");
-    AMIGAHW_ANNOUNCE(AGNUS_PAL, "Normal/Fat PAL Agnus 8367/8371");
-    AMIGAHW_ANNOUNCE(AGNUS_NTSC, "Normal/Fat NTSC Agnus 8361/8370");
-    AMIGAHW_ANNOUNCE(AGNUS_HR_PAL, "Fat Hires PAL Agnus 8372");
-    AMIGAHW_ANNOUNCE(AGNUS_HR_NTSC, "Fat Hires NTSC Agnus 8372");
-    AMIGAHW_ANNOUNCE(ALICE_PAL, "PAL Alice 8374");
-    AMIGAHW_ANNOUNCE(ALICE_NTSC, "NTSC Alice 8374");
-    AMIGAHW_ANNOUNCE(MAGIC_REKICK, "Magic Hard Rekick");
-    AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA Slot");
+	if (AMIGAHW_PRESENT(name))			\
+		seq_printf (m, "\t%s\n", str)
+
+	seq_printf (m, "Detected hardware:\n");
+
+	AMIGAHW_ANNOUNCE(AMI_VIDEO, "Amiga Video");
+	AMIGAHW_ANNOUNCE(AMI_BLITTER, "Blitter");
+	AMIGAHW_ANNOUNCE(AMBER_FF, "Amber Flicker Fixer");
+	AMIGAHW_ANNOUNCE(AMI_AUDIO, "Amiga Audio");
+	AMIGAHW_ANNOUNCE(AMI_FLOPPY, "Floppy Controller");
+	AMIGAHW_ANNOUNCE(A3000_SCSI, "SCSI Controller WD33C93 (A3000 style)");
+	AMIGAHW_ANNOUNCE(A4000_SCSI, "SCSI Controller NCR53C710 (A4000T style)");
+	AMIGAHW_ANNOUNCE(A1200_IDE, "IDE Interface (A1200 style)");
+	AMIGAHW_ANNOUNCE(A4000_IDE, "IDE Interface (A4000 style)");
+	AMIGAHW_ANNOUNCE(CD_ROM, "Internal CD ROM drive");
+	AMIGAHW_ANNOUNCE(AMI_KEYBOARD, "Keyboard");
+	AMIGAHW_ANNOUNCE(AMI_MOUSE, "Mouse Port");
+	AMIGAHW_ANNOUNCE(AMI_SERIAL, "Serial Port");
+	AMIGAHW_ANNOUNCE(AMI_PARALLEL, "Parallel Port");
+	AMIGAHW_ANNOUNCE(A2000_CLK, "Hardware Clock (A2000 style)");
+	AMIGAHW_ANNOUNCE(A3000_CLK, "Hardware Clock (A3000 style)");
+	AMIGAHW_ANNOUNCE(CHIP_RAM, "Chip RAM");
+	AMIGAHW_ANNOUNCE(PAULA, "Paula 8364");
+	AMIGAHW_ANNOUNCE(DENISE, "Denise 8362");
+	AMIGAHW_ANNOUNCE(DENISE_HR, "Denise 8373");
+	AMIGAHW_ANNOUNCE(LISA, "Lisa 8375");
+	AMIGAHW_ANNOUNCE(AGNUS_PAL, "Normal/Fat PAL Agnus 8367/8371");
+	AMIGAHW_ANNOUNCE(AGNUS_NTSC, "Normal/Fat NTSC Agnus 8361/8370");
+	AMIGAHW_ANNOUNCE(AGNUS_HR_PAL, "Fat Hires PAL Agnus 8372");
+	AMIGAHW_ANNOUNCE(AGNUS_HR_NTSC, "Fat Hires NTSC Agnus 8372");
+	AMIGAHW_ANNOUNCE(ALICE_PAL, "PAL Alice 8374");
+	AMIGAHW_ANNOUNCE(ALICE_NTSC, "NTSC Alice 8374");
+	AMIGAHW_ANNOUNCE(MAGIC_REKICK, "Magic Hard Rekick");
+	AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA Slot");
 #ifdef CONFIG_ZORRO
-    if (AMIGAHW_PRESENT(ZORRO))
-	len += sprintf(buffer+len, "\tZorro II%s AutoConfig: %d Expansion "
-				   "Device%s\n",
-		       AMIGAHW_PRESENT(ZORRO3) ? "I" : "",
-		       zorro_num_autocon, zorro_num_autocon == 1 ? "" : "s");
+	if (AMIGAHW_PRESENT(ZORRO))
+		seq_printf(m, "\tZorro II%s AutoConfig: %d Expansion "
+				"Device%s\n",
+				AMIGAHW_PRESENT(ZORRO3) ? "I" : "",
+				zorro_num_autocon, zorro_num_autocon == 1 ? "" : "s");
 #endif /* CONFIG_ZORRO */
 
 #undef AMIGAHW_ANNOUNCE
-
-    return(len);
 }
+
+/*
+ * The Amiga keyboard driver needs key_maps, but we cannot export it in
+ * drivers/char/defkeymap.c, as it is autogenerated
+ */
+#ifdef CONFIG_HW_CONSOLE
+EXPORT_SYMBOL_GPL(key_maps);
+#endif
diff --git a/arch/m68k/amiga/pcmcia.c b/arch/m68k/amiga/pcmcia.c
index fc57c6e72ac..7106f0c3639 100644
--- a/arch/m68k/amiga/pcmcia.c
+++ b/arch/m68k/amiga/pcmcia.c
@@ -15,6 +15,8 @@
 #include <linux/types.h>
 #include <linux/jiffies.h>
 #include <linux/timer.h>
+#include <linux/module.h>
+
 #include <asm/amigayle.h>
 #include <asm/amipcmcia.h>
 
@@ -30,10 +32,11 @@ void pcmcia_reset(void)
 	while (time_before(jiffies, reset_start_time + 1*HZ/100));
 	b = gayle_reset;
 }
+EXPORT_SYMBOL(pcmcia_reset);
 
 
 /* copy a tuple, including tuple header. return nb bytes copied */
-/* be carefull as this may trigger a GAYLE_IRQ_WR interrupt ! */
+/* be careful as this may trigger a GAYLE_IRQ_WR interrupt ! */
 
 int pcmcia_copy_tuple(unsigned char tuple_id, void *tuple, int max_len)
 {
@@ -61,6 +64,7 @@ int pcmcia_copy_tuple(unsigned char tuple_id, void *tuple, int max_len)
 
 	return 0;
 }
+EXPORT_SYMBOL(pcmcia_copy_tuple);
 
 void pcmcia_program_voltage(int voltage)
 {
@@ -84,6 +88,7 @@ void pcmcia_program_voltage(int voltage)
 	gayle.config = cfg_byte;
 
 }
+EXPORT_SYMBOL(pcmcia_program_voltage);
 
 void pcmcia_access_speed(int speed)
 {
@@ -101,13 +106,17 @@ void pcmcia_access_speed(int speed)
 	cfg_byte = (cfg_byte & 0xf3) | s;
 	gayle.config = cfg_byte;
 }
+EXPORT_SYMBOL(pcmcia_access_speed);
 
 void pcmcia_write_enable(void)
 {
 	gayle.cardstatus = GAYLE_CS_WR|GAYLE_CS_DA;
 }
+EXPORT_SYMBOL(pcmcia_write_enable);
 
 void pcmcia_write_disable(void)
 {
 	gayle.cardstatus = 0;
 }
+EXPORT_SYMBOL(pcmcia_write_disable);
+
diff --git a/arch/m68k/amiga/platform.c b/arch/m68k/amiga/platform.c
new file mode 100644
index 00000000000..d34029d7b05
--- /dev/null
+++ b/arch/m68k/amiga/platform.c
@@ -0,0 +1,255 @@
+/*
+ *  Copyright (C) 2007-2009 Geert Uytterhoeven
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/zorro.h>
+
+#include <asm/amigahw.h>
+#include <asm/amigayle.h>
+#include <asm/byteorder.h>
+
+
+#ifdef CONFIG_ZORRO
+
+static const struct resource zorro_resources[] __initconst = {
+	/* Zorro II regions (on Zorro II/III) */
+	{
+		.name	= "Zorro II exp",
+		.start	= 0x00e80000,
+		.end	= 0x00efffff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "Zorro II mem",
+		.start	= 0x00200000,
+		.end	= 0x009fffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	/* Zorro III regions (on Zorro III only) */
+	{
+		.name	= "Zorro III exp",
+		.start	= 0xff000000,
+		.end	= 0xffffffff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "Zorro III cfg",
+		.start	= 0x40000000,
+		.end	= 0x7fffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+
+static int __init amiga_init_bus(void)
+{
+	struct platform_device *pdev;
+	unsigned int n;
+
+	if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(ZORRO))
+		return -ENODEV;
+
+	n = AMIGAHW_PRESENT(ZORRO3) ? 4 : 2;
+	pdev = platform_device_register_simple("amiga-zorro", -1,
+					       zorro_resources, n);
+	return PTR_ERR_OR_ZERO(pdev);
+}
+
+subsys_initcall(amiga_init_bus);
+
+
+static int __init z_dev_present(zorro_id id)
+{
+	unsigned int i;
+
+	for (i = 0; i < zorro_num_autocon; i++) {
+		const struct ExpansionRom *rom = &zorro_autocon_init[i].rom;
+		if (be16_to_cpu(rom->er_Manufacturer) == ZORRO_MANUF(id) &&
+		    rom->er_Product == ZORRO_PROD(id))
+			return 1;
+	}
+
+	return 0;
+}
+
+#else /* !CONFIG_ZORRO */
+
+static inline int z_dev_present(zorro_id id) { return 0; }
+
+#endif /* !CONFIG_ZORRO */
+
+
+static const struct resource a3000_scsi_resource __initconst = {
+	.start	= 0xdd0000,
+	.end	= 0xdd00ff,
+	.flags	= IORESOURCE_MEM,
+};
+
+
+static const struct resource a4000t_scsi_resource __initconst = {
+	.start	= 0xdd0000,
+	.end	= 0xdd0fff,
+	.flags	= IORESOURCE_MEM,
+};
+
+
+static const struct resource a1200_ide_resource __initconst = {
+	.start	= 0xda0000,
+	.end	= 0xda1fff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static const struct gayle_ide_platform_data a1200_ide_pdata __initconst = {
+	.base		= 0xda0000,
+	.irqport	= 0xda9000,
+	.explicit_ack	= 1,
+};
+
+
+static const struct resource a4000_ide_resource __initconst = {
+	.start	= 0xdd2000,
+	.end	= 0xdd3fff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static const struct gayle_ide_platform_data a4000_ide_pdata __initconst = {
+	.base		= 0xdd2020,
+	.irqport	= 0xdd3020,
+	.explicit_ack	= 0,
+};
+
+
+static const struct resource amiga_rtc_resource __initconst = {
+	.start	= 0x00dc0000,
+	.end	= 0x00dcffff,
+	.flags	= IORESOURCE_MEM,
+};
+
+
+static int __init amiga_init_devices(void)
+{
+	struct platform_device *pdev;
+	int error;
+
+	if (!MACH_IS_AMIGA)
+		return -ENODEV;
+
+	/* video hardware */
+	if (AMIGAHW_PRESENT(AMI_VIDEO)) {
+		pdev = platform_device_register_simple("amiga-video", -1, NULL,
+						       0);
+		if (IS_ERR(pdev))
+			return PTR_ERR(pdev);
+	}
+
+
+	/* sound hardware */
+	if (AMIGAHW_PRESENT(AMI_AUDIO)) {
+		pdev = platform_device_register_simple("amiga-audio", -1, NULL,
+						       0);
+		if (IS_ERR(pdev))
+			return PTR_ERR(pdev);
+	}
+
+
+	/* storage interfaces */
+	if (AMIGAHW_PRESENT(AMI_FLOPPY)) {
+		pdev = platform_device_register_simple("amiga-floppy", -1,
+						       NULL, 0);
+		if (IS_ERR(pdev))
+			return PTR_ERR(pdev);
+	}
+
+	if (AMIGAHW_PRESENT(A3000_SCSI)) {
+		pdev = platform_device_register_simple("amiga-a3000-scsi", -1,
+						       &a3000_scsi_resource, 1);
+		if (IS_ERR(pdev))
+			return PTR_ERR(pdev);
+	}
+
+	if (AMIGAHW_PRESENT(A4000_SCSI)) {
+		pdev = platform_device_register_simple("amiga-a4000t-scsi", -1,
+						       &a4000t_scsi_resource,
+						       1);
+		if (IS_ERR(pdev))
+			return PTR_ERR(pdev);
+	}
+
+	if (AMIGAHW_PRESENT(A1200_IDE) ||
+	    z_dev_present(ZORRO_PROD_MTEC_VIPER_MK_V_E_MATRIX_530_SCSI_IDE)) {
+		pdev = platform_device_register_simple("amiga-gayle-ide", -1,
+						       &a1200_ide_resource, 1);
+		if (IS_ERR(pdev))
+			return PTR_ERR(pdev);
+		error = platform_device_add_data(pdev, &a1200_ide_pdata,
+						 sizeof(a1200_ide_pdata));
+		if (error)
+			return error;
+	}
+
+	if (AMIGAHW_PRESENT(A4000_IDE)) {
+		pdev = platform_device_register_simple("amiga-gayle-ide", -1,
+						       &a4000_ide_resource, 1);
+		if (IS_ERR(pdev))
+			return PTR_ERR(pdev);
+		error = platform_device_add_data(pdev, &a4000_ide_pdata,
+						 sizeof(a4000_ide_pdata));
+		if (error)
+			return error;
+	}
+
+
+	/* other I/O hardware */
+	if (AMIGAHW_PRESENT(AMI_KEYBOARD)) {
+		pdev = platform_device_register_simple("amiga-keyboard", -1,
+						       NULL, 0);
+		if (IS_ERR(pdev))
+			return PTR_ERR(pdev);
+	}
+
+	if (AMIGAHW_PRESENT(AMI_MOUSE)) {
+		pdev = platform_device_register_simple("amiga-mouse", -1, NULL,
+						       0);
+		if (IS_ERR(pdev))
+			return PTR_ERR(pdev);
+	}
+
+	if (AMIGAHW_PRESENT(AMI_SERIAL)) {
+		pdev = platform_device_register_simple("amiga-serial", -1,
+						       NULL, 0);
+		if (IS_ERR(pdev))
+			return PTR_ERR(pdev);
+	}
+
+	if (AMIGAHW_PRESENT(AMI_PARALLEL)) {
+		pdev = platform_device_register_simple("amiga-parallel", -1,
+						       NULL, 0);
+		if (IS_ERR(pdev))
+			return PTR_ERR(pdev);
+	}
+
+
+	/* real time clocks */
+	if (AMIGAHW_PRESENT(A2000_CLK)) {
+		pdev = platform_device_register_simple("rtc-msm6242", -1,
+						       &amiga_rtc_resource, 1);
+		if (IS_ERR(pdev))
+			return PTR_ERR(pdev);
+	}
+
+	if (AMIGAHW_PRESENT(A3000_CLK)) {
+		pdev = platform_device_register_simple("rtc-rp5c01", -1,
+						       &amiga_rtc_resource, 1);
+		if (IS_ERR(pdev))
+			return PTR_ERR(pdev);
+	}
+
+	return 0;
+}
+
+arch_initcall(amiga_init_devices);
diff --git a/arch/m68k/apollo/Makefile b/arch/m68k/apollo/Makefile
index 39264f3b6ad..76a057962c3 100644
--- a/arch/m68k/apollo/Makefile
+++ b/arch/m68k/apollo/Makefile
@@ -2,4 +2,4 @@
 # Makefile for Linux arch/m68k/amiga source directory
 #
 
-obj-y		:= config.o dn_ints.o dma.o
+obj-y		:= config.o dn_ints.o
diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c
index 26492947125..6e62d66c396 100644
--- a/arch/m68k/apollo/config.c
+++ b/arch/m68k/apollo/config.c
@@ -1,4 +1,4 @@
-#include <linux/config.h>
+#include <linux/init.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
@@ -10,7 +10,8 @@
 
 #include <asm/setup.h>
 #include <asm/bootinfo.h>
-#include <asm/system.h>
+#include <asm/bootinfo-apollo.h>
+#include <asm/byteorder.h>
 #include <asm/pgtable.h>
 #include <asm/apollohw.h>
 #include <asm/irq.h>
@@ -26,27 +27,16 @@ u_long cpuctrl_physaddr;
 u_long timer_physaddr;
 u_long apollo_model;
 
-extern void dn_sched_init(irqreturn_t (*handler)(int,void *,struct pt_regs *));
+extern void dn_sched_init(irq_handler_t handler);
 extern void dn_init_IRQ(void);
-extern int dn_request_irq(unsigned int irq, irqreturn_t (*handler)(int, void *, struct pt_regs *), unsigned long flags, const char *devname, void *dev_id);
-extern void dn_free_irq(unsigned int irq, void *dev_id);
-extern void dn_enable_irq(unsigned int);
-extern void dn_disable_irq(unsigned int);
-extern int show_dn_interrupts(struct seq_file *, void *);
-extern unsigned long dn_gettimeoffset(void);
+extern u32 dn_gettimeoffset(void);
 extern int dn_dummy_hwclk(int, struct rtc_time *);
 extern int dn_dummy_set_clock_mmss(unsigned long);
 extern void dn_dummy_reset(void);
-extern void dn_dummy_waitbut(void);
-extern struct fb_info *dn_fb_init(long *);
-extern void dn_dummy_debug_init(void);
-extern void dn_dummy_video_setup(char *,int *);
-extern irqreturn_t dn_process_int(int irq, struct pt_regs *fp);
 #ifdef CONFIG_HEARTBEAT
 static void dn_heartbeat(int on);
 #endif
-static irqreturn_t dn_timer_int(int irq,void *, struct pt_regs *);
-static irqreturn_t (*sched_timer_handler)(int, void *, struct pt_regs *)=NULL;
+static irqreturn_t dn_timer_int(int irq,void *);
 static void dn_get_model(char *model);
 static const char *apollo_models[] = {
 	[APOLLO_DN3000-APOLLO_DN3000] = "DN3000 (Otter)",
@@ -56,28 +46,27 @@ static const char *apollo_models[] = {
 	[APOLLO_DN4500-APOLLO_DN3000] = "DN4500 (Roadrunner)"
 };
 
-int apollo_parse_bootinfo(const struct bi_record *record) {
-
+int __init apollo_parse_bootinfo(const struct bi_record *record)
+{
 	int unknown = 0;
-	const unsigned long *data = record->data;
+	const void *data = record->data;
 
-	switch(record->tag) {
-		case BI_APOLLO_MODEL:
-			apollo_model=*data;
-			break;
+	switch (be16_to_cpu(record->tag)) {
+	case BI_APOLLO_MODEL:
+		apollo_model = be32_to_cpup(data);
+		break;
 
-		default:
-			 unknown=1;
+	default:
+		 unknown=1;
 	}
 
 	return unknown;
 }
 
-void dn_setup_model(void) {
-
-
-	printk("Apollo hardware found: ");
-	printk("[%s]\n", apollo_models[apollo_model - APOLLO_DN3000]);
+static void __init dn_setup_model(void)
+{
+	pr_info("Apollo hardware found: [%s]\n",
+		apollo_models[apollo_model - APOLLO_DN3000]);
 
 	switch(apollo_model) {
 		case APOLLO_UNKNOWN:
@@ -156,29 +145,19 @@ void dn_serial_print (const char *str)
     }
 }
 
-void config_apollo(void) {
-
+void __init config_apollo(void)
+{
 	int i;
 
 	dn_setup_model();
 
 	mach_sched_init=dn_sched_init; /* */
 	mach_init_IRQ=dn_init_IRQ;
-	mach_default_handler=NULL;
-	mach_request_irq     = dn_request_irq;
-	mach_free_irq        = dn_free_irq;
-	enable_irq      = dn_enable_irq;
-	disable_irq     = dn_disable_irq;
-	mach_get_irq_list    = show_dn_interrupts;
-	mach_gettimeoffset   = dn_gettimeoffset;
+	arch_gettimeoffset   = dn_gettimeoffset;
 	mach_max_dma_address = 0xffffffff;
 	mach_hwclk           = dn_dummy_hwclk; /* */
 	mach_set_clock_mmss  = dn_dummy_set_clock_mmss; /* */
-	mach_process_int     = dn_process_int;
 	mach_reset	     = dn_dummy_reset;  /* */
-#ifdef CONFIG_DUMMY_CONSOLE
-        conswitchp           = &dummy_con;
-#endif
 #ifdef CONFIG_HEARTBEAT
 	mach_heartbeat = dn_heartbeat;
 #endif
@@ -192,43 +171,45 @@ void config_apollo(void) {
 
 }
 
-irqreturn_t dn_timer_int(int irq, void *dev_id, struct pt_regs *fp) {
+irqreturn_t dn_timer_int(int irq, void *dev_id)
+{
+	irq_handler_t timer_handler = dev_id;
 
 	volatile unsigned char x;
 
-	sched_timer_handler(irq,dev_id,fp);
+	timer_handler(irq, dev_id);
 
-	x=*(volatile unsigned char *)(timer+3);
-	x=*(volatile unsigned char *)(timer+5);
+	x = *(volatile unsigned char *)(apollo_timer + 3);
+	x = *(volatile unsigned char *)(apollo_timer + 5);
 
 	return IRQ_HANDLED;
 }
 
-void dn_sched_init(irqreturn_t (*timer_routine)(int, void *, struct pt_regs *)) {
-
+void dn_sched_init(irq_handler_t timer_routine)
+{
 	/* program timer 1 */
-	*(volatile unsigned char *)(timer+3)=0x01;
-	*(volatile unsigned char *)(timer+1)=0x40;
-	*(volatile unsigned char *)(timer+5)=0x09;
-	*(volatile unsigned char *)(timer+7)=0xc4;
+	*(volatile unsigned char *)(apollo_timer + 3) = 0x01;
+	*(volatile unsigned char *)(apollo_timer + 1) = 0x40;
+	*(volatile unsigned char *)(apollo_timer + 5) = 0x09;
+	*(volatile unsigned char *)(apollo_timer + 7) = 0xc4;
 
 	/* enable IRQ of PIC B */
 	*(volatile unsigned char *)(pica+1)&=(~8);
 
 #if 0
-	printk("*(0x10803) %02x\n",*(volatile unsigned char *)(timer+0x3));
-	printk("*(0x10803) %02x\n",*(volatile unsigned char *)(timer+0x3));
+	pr_info("*(0x10803) %02x\n",
+		*(volatile unsigned char *)(apollo_timer + 0x3));
+	pr_info("*(0x10803) %02x\n",
+		*(volatile unsigned char *)(apollo_timer + 0x3));
 #endif
 
-	sched_timer_handler=timer_routine;
-	request_irq(0,dn_timer_int,0,NULL,NULL);
-
+	if (request_irq(IRQ_APOLLO, dn_timer_int, 0, "time", timer_routine))
+		pr_err("Couldn't register timer interrupt\n");
 }
 
-unsigned long dn_gettimeoffset(void) {
-
+u32 dn_gettimeoffset(void)
+{
 	return 0xdeadbeef;
-
 }
 
 int dn_dummy_hwclk(int op, struct rtc_time *t) {
@@ -257,12 +238,10 @@ int dn_dummy_hwclk(int op, struct rtc_time *t) {
 
 }
 
-int dn_dummy_set_clock_mmss(unsigned long nowtime) {
-
-  printk("set_clock_mmss\n");
-
-  return 0;
-
+int dn_dummy_set_clock_mmss(unsigned long nowtime)
+{
+	pr_info("set_clock_mmss\n");
+	return 0;
 }
 
 void dn_dummy_reset(void) {
diff --git a/arch/m68k/apollo/dma.c b/arch/m68k/apollo/dma.c
deleted file mode 100644
index aed8be177ef..00000000000
--- a/arch/m68k/apollo/dma.c
+++ /dev/null
@@ -1,50 +0,0 @@
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/kd.h>
-#include <linux/tty.h>
-#include <linux/console.h>
-
-#include <asm/setup.h>
-#include <asm/bootinfo.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/apollodma.h>
-#include <asm/io.h>
-
-/* note only works for 16 Bit 1 page DMA's */
-
-static unsigned short next_free_xlat_entry=0;
-
-unsigned short dma_map_page(unsigned long phys_addr,int count,int type) {
-
-	unsigned long page_aligned_addr=phys_addr & (~((1<<12)-1));
-	unsigned short start_map_addr=page_aligned_addr >> 10;
-	unsigned short free_xlat_entry, *xlat_map_entry;
-	int i;
-
-	free_xlat_entry=next_free_xlat_entry;
-	for(i=0,xlat_map_entry=addr_xlat_map+(free_xlat_entry<<2);i<8;i++,xlat_map_entry++) {
-#if 0
-		printk("phys_addr: %x, page_aligned_addr: %x, start_map_addr: %x\n",phys_addr,page_aligned_addr,start_map_addr+i);
-#endif
-		out_be16(xlat_map_entry, start_map_addr+i);
-	}
-
-	next_free_xlat_entry+=2;
-	if(next_free_xlat_entry>125)
-		next_free_xlat_entry=0;
-
-#if 0
-	printk("next_free_xlat_entry: %d\n",next_free_xlat_entry);
-#endif
-
-	return free_xlat_entry<<10;
-}
-
-void dma_unmap_page(unsigned short dma_addr) {
-
-	return ;
-
-}
-
diff --git a/arch/m68k/apollo/dn_ints.c b/arch/m68k/apollo/dn_ints.c
index a31259359a1..17be1e7e2df 100644
--- a/arch/m68k/apollo/dn_ints.c
+++ b/arch/m68k/apollo/dn_ints.c
@@ -1,125 +1,47 @@
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/jiffies.h>
-#include <linux/kernel_stat.h>
-#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
 
-#include <asm/system.h>
-#include <asm/irq.h>
 #include <asm/traps.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
 #include <asm/apollohw.h>
-#include <asm/errno.h>
 
-static irq_handler_t dn_irqs[16];
-
-irqreturn_t dn_process_int(int irq, struct pt_regs *fp)
+unsigned int apollo_irq_startup(struct irq_data *data)
 {
-  irqreturn_t res = IRQ_NONE;
-
-  if(dn_irqs[irq-160].handler) {
-    res = dn_irqs[irq-160].handler(irq,dn_irqs[irq-160].dev_id,fp);
-  } else {
-    printk("spurious irq %d occurred\n",irq);
-  }
-
-  *(volatile unsigned char *)(pica)=0x20;
-  *(volatile unsigned char *)(picb)=0x20;
-
-  return res;
-}
-
-void dn_init_IRQ(void) {
-
-  int i;
-
-  for(i=0;i<16;i++) {
-    dn_irqs[i].handler=NULL;
-    dn_irqs[i].flags=IRQ_FLG_STD;
-    dn_irqs[i].dev_id=NULL;
-    dn_irqs[i].devname=NULL;
-  }
+	unsigned int irq = data->irq;
 
+	if (irq < 8)
+		*(volatile unsigned char *)(pica+1) &= ~(1 << irq);
+	else
+		*(volatile unsigned char *)(picb+1) &= ~(1 << (irq - 8));
+	return 0;
 }
 
-int dn_request_irq(unsigned int irq, irqreturn_t (*handler)(int, void *, struct pt_regs *), unsigned long flags, const char *devname, void *dev_id) {
-
-  if((irq<0) || (irq>15)) {
-    printk("Trying to request invalid IRQ\n");
-    return -ENXIO;
-  }
-
-  if(!dn_irqs[irq].handler) {
-    dn_irqs[irq].handler=handler;
-    dn_irqs[irq].flags=IRQ_FLG_STD;
-    dn_irqs[irq].dev_id=dev_id;
-    dn_irqs[irq].devname=devname;
-    if(irq<8)
-      *(volatile unsigned char *)(pica+1)&=~(1<<irq);
-    else
-      *(volatile unsigned char *)(picb+1)&=~(1<<(irq-8));
-
-    return 0;
-  }
-  else {
-    printk("Trying to request already assigned irq %d\n",irq);
-    return -ENXIO;
-  }
-
-}
-
-void dn_free_irq(unsigned int irq, void *dev_id) {
-
-  if((irq<0) || (irq>15)) {
-    printk("Trying to free invalid IRQ\n");
-    return ;
-  }
-
-  if(irq<8)
-    *(volatile unsigned char *)(pica+1)|=(1<<irq);
-  else
-    *(volatile unsigned char *)(picb+1)|=(1<<(irq-8));
-
-  dn_irqs[irq].handler=NULL;
-  dn_irqs[irq].flags=IRQ_FLG_STD;
-  dn_irqs[irq].dev_id=NULL;
-  dn_irqs[irq].devname=NULL;
-
-  return ;
-
-}
-
-void dn_enable_irq(unsigned int irq) {
-
-  printk("dn enable irq\n");
-
-}
-
-void dn_disable_irq(unsigned int irq) {
-
-  printk("dn disable irq\n");
-
-}
-
-int show_dn_interrupts(struct seq_file *p, void *v) {
-
-  printk("dn get irq list\n");
-
-  return 0;
+void apollo_irq_shutdown(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
 
+	if (irq < 8)
+		*(volatile unsigned char *)(pica+1) |= (1 << irq);
+	else
+		*(volatile unsigned char *)(picb+1) |= (1 << (irq - 8));
 }
 
-struct fb_info *dn_dummy_fb_init(long *mem_start) {
-
-  printk("fb init\n");
-
-  return NULL;
-
+void apollo_irq_eoi(struct irq_data *data)
+{
+	*(volatile unsigned char *)(pica) = 0x20;
+	*(volatile unsigned char *)(picb) = 0x20;
 }
 
-void dn_dummy_video_setup(char *options,int *ints) {
+static struct irq_chip apollo_irq_chip = {
+	.name           = "apollo",
+	.irq_startup    = apollo_irq_startup,
+	.irq_shutdown   = apollo_irq_shutdown,
+	.irq_eoi	= apollo_irq_eoi,
+};
 
-  printk("no video yet\n");
 
+void __init dn_init_IRQ(void)
+{
+	m68k_setup_user_interrupt(VEC_USER + 96, 16);
+	m68k_setup_irq_controller(&apollo_irq_chip, handle_fasteoi_irq,
+				  IRQ_APOLLO, 16);
 }
diff --git a/arch/m68k/atari/Makefile b/arch/m68k/atari/Makefile
index 8cb6236b39d..0cac723306f 100644
--- a/arch/m68k/atari/Makefile
+++ b/arch/m68k/atari/Makefile
@@ -3,8 +3,6 @@
 #
 
 obj-y		:= config.o time.o debug.o ataints.o stdma.o \
-			atasound.o stram.o atari_ksyms.o
+			atasound.o stram.o
 
-ifeq ($(CONFIG_PCI),y)
-obj-$(CONFIG_HADES)	+= hades-pci.o
-endif
+obj-$(CONFIG_ATARI_KBD_CORE)	+= atakeyb.o
diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c
index 076f4791784..3d2b63bedf0 100644
--- a/arch/m68k/atari/ataints.c
+++ b/arch/m68k/atari/ataints.c
@@ -40,8 +40,9 @@
 #include <linux/kernel_stat.h>
 #include <linux/init.h>
 #include <linux/seq_file.h>
+#include <linux/module.h>
+#include <linux/irq.h>
 
-#include <asm/system.h>
 #include <asm/traps.h>
 
 #include <asm/atarihw.h>
@@ -49,6 +50,7 @@
 #include <asm/atari_stdma.h>
 #include <asm/irq.h>
 #include <asm/entry.h>
+#include <asm/io.h>
 
 
 /*
@@ -59,266 +61,197 @@
  * <asm/atariints.h>): Autovector interrupts are 1..7, then follow ST-MFP,
  * TT-MFP, SCC, and finally VME interrupts. Vector numbers for the latter can
  * be allocated by atari_register_vme_int().
- *
- * Each interrupt can be of three types:
- *
- *  - SLOW: The handler runs with all interrupts enabled, except the one it
- *    was called by (to avoid reentering). This should be the usual method.
- *    But it is currently possible only for MFP ints, since only the MFP
- *    offers an easy way to mask interrupts.
- *
- *  - FAST: The handler runs with all interrupts disabled. This should be used
- *    only for really fast handlers, that just do actions immediately
- *    necessary, and let the rest do a bottom half or task queue.
- *
- *  - PRIORITIZED: The handler can be interrupted by higher-level ints
- *    (greater IPL, no MFP priorities!). This is the method of choice for ints
- *    which should be slow, but are not from a MFP.
- *
- * The feature of more than one handler for one int source is still there, but
- * only applicable if all handers are of the same type. To not slow down
- * processing of ints with only one handler by the chaining feature, the list
- * calling function atari_call_irq_list() is only plugged in at the time the
- * second handler is registered.
- *
- * Implementation notes: For fast-as-possible int handling, there are separate
- * entry points for each type (slow/fast/prio). The assembler handler calls
- * the irq directly in the usual case, no C wrapper is involved. In case of
- * multiple handlers, atari_call_irq_list() is registered as handler and calls
- * in turn the real irq's. To ease access from assembler level to the irq
- * function pointer and accompanying data, these two are stored in a separate
- * array, irq_handler[]. The rest of data (type, name) are put into a second
- * array, irq_param, that is accessed from C only. For each slow interrupt (32
- * in all) there are separate handler functions, which makes it possible to
- * hard-code the MFP register address and value, are necessary to mask the
- * int. If there'd be only one generic function, lots of calculations would be
- * needed to determine MFP register and int mask from the vector number :-(
- *
- * Furthermore, slow ints may not lower the IPL below its previous value
- * (before the int happened). This is needed so that an int of class PRIO, on
- * that this int may be stacked, cannot be reentered. This feature is
- * implemented as follows: If the stack frame format is 1 (throwaway), the int
- * is not stacked, and the IPL is anded with 0xfbff, resulting in a new level
- * 2, which still blocks the HSYNC, but no interrupts of interest. If the
- * frame format is 0, the int is nested, and the old IPL value can be found in
- * the sr copy in the frame.
  */
 
+/*
+ * Bitmap for free interrupt vector numbers
+ * (new vectors starting from 0x70 can be allocated by
+ * atari_register_vme_int())
+ */
+static int free_vme_vec_bitmap;
 
-#define	NUM_INT_SOURCES	(8 + NUM_ATARI_SOURCES)
+/* GK:
+ * HBL IRQ handler for Falcon. Nobody needs it :-)
+ * ++andreas: raise ipl to disable further HBLANK interrupts.
+ */
+asmlinkage void falcon_hblhandler(void);
+asm(".text\n"
+__ALIGN_STR "\n\t"
+"falcon_hblhandler:\n\t"
+	"orw	#0x200,%sp@\n\t"	/* set saved ipl to 2 */
+	"rte");
 
-typedef void (*asm_irq_handler)(void);
+extern void atari_microwire_cmd(int cmd);
 
-struct irqhandler {
-	irqreturn_t (*handler)(int, void *, struct pt_regs *);
-	void	*dev_id;
-};
+static unsigned int atari_irq_startup(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+
+	m68k_irq_startup(data);
+	atari_turnon_irq(irq);
+	atari_enable_irq(irq);
+	return 0;
+}
+
+static void atari_irq_shutdown(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+
+	atari_disable_irq(irq);
+	atari_turnoff_irq(irq);
+	m68k_irq_shutdown(data);
+
+	if (irq == IRQ_AUTO_4)
+	    vectors[VEC_INT4] = falcon_hblhandler;
+}
+
+static void atari_irq_enable(struct irq_data *data)
+{
+	atari_enable_irq(data->irq);
+}
 
-struct irqparam {
-	unsigned long	flags;
-	const char	*devname;
+static void atari_irq_disable(struct irq_data *data)
+{
+	atari_disable_irq(data->irq);
+}
+
+static struct irq_chip atari_irq_chip = {
+	.name		= "atari",
+	.irq_startup	= atari_irq_startup,
+	.irq_shutdown	= atari_irq_shutdown,
+	.irq_enable	= atari_irq_enable,
+	.irq_disable	= atari_irq_disable,
 };
 
 /*
- * Array with irq's and their parameter data. This array is accessed from low
- * level assembler code, so an element size of 8 allows usage of index scaling
- * addressing mode.
+ * ST-MFP timer D chained interrupts - each driver gets its own timer
+ * interrupt instance.
  */
-static struct irqhandler irq_handler[NUM_INT_SOURCES];
 
-/*
- * This array hold the rest of parameters of int handlers: type
- * (slow,fast,prio) and the name of the handler. These values are only
- * accessed from C
- */
-static struct irqparam irq_param[NUM_INT_SOURCES];
+struct mfptimerbase {
+	volatile struct MFP *mfp;
+	unsigned char mfp_mask, mfp_data;
+	unsigned short int_mask;
+	int handler_irq, mfptimer_irq, server_irq;
+	char *name;
+} stmfp_base = {
+	.mfp		= &st_mfp,
+	.int_mask	= 0x0,
+	.handler_irq	= IRQ_MFP_TIMD,
+	.mfptimer_irq	= IRQ_MFP_TIMER1,
+	.name		= "MFP Timer D"
+};
 
-/*
- * Bitmap for free interrupt vector numbers
- * (new vectors starting from 0x70 can be allocated by
- * atari_register_vme_int())
- */
-static int free_vme_vec_bitmap;
+static irqreturn_t mfptimer_handler(int irq, void *dev_id)
+{
+	struct mfptimerbase *base = dev_id;
+	int mach_irq;
+	unsigned char ints;
+
+	mach_irq = base->mfptimer_irq;
+	ints = base->int_mask;
+	for (; ints; mach_irq++, ints >>= 1) {
+		if (ints & 1)
+			generic_handle_irq(mach_irq);
+	}
+	return IRQ_HANDLED;
+}
 
-/* check for valid int number (complex, sigh...) */
-#define	IS_VALID_INTNO(n)											\
-	((n) > 0 &&														\
-	 /* autovec and ST-MFP ok anyway */								\
-	 (((n) < TTMFP_SOURCE_BASE) ||									\
-	  /* TT-MFP ok if present */									\
-	  ((n) >= TTMFP_SOURCE_BASE && (n) < SCC_SOURCE_BASE &&			\
-	   ATARIHW_PRESENT(TT_MFP)) ||									\
-	  /* SCC ok if present and number even */						\
-	  ((n) >= SCC_SOURCE_BASE && (n) < VME_SOURCE_BASE &&			\
-	   !((n) & 1) && ATARIHW_PRESENT(SCC)) ||						\
-	  /* greater numbers ok if they are registered VME vectors */		\
-	  ((n) >= VME_SOURCE_BASE && (n) < VME_SOURCE_BASE + VME_MAX_SOURCES && \
-		  free_vme_vec_bitmap & (1 << ((n) - VME_SOURCE_BASE)))))
+
+static void atari_mfptimer_enable(struct irq_data *data)
+{
+	int mfp_num = data->irq - IRQ_MFP_TIMER1;
+	stmfp_base.int_mask |= 1 << mfp_num;
+	atari_enable_irq(IRQ_MFP_TIMD);
+}
+
+static void atari_mfptimer_disable(struct irq_data *data)
+{
+	int mfp_num = data->irq - IRQ_MFP_TIMER1;
+	stmfp_base.int_mask &= ~(1 << mfp_num);
+	if (!stmfp_base.int_mask)
+		atari_disable_irq(IRQ_MFP_TIMD);
+}
+
+static struct irq_chip atari_mfptimer_chip = {
+	.name		= "timer_d",
+	.irq_enable	= atari_mfptimer_enable,
+	.irq_disable	= atari_mfptimer_disable,
+};
 
 
 /*
- * Here start the assembler entry points for interrupts
+ * EtherNAT CPLD interrupt handling
+ * CPLD interrupt register is at phys. 0x80000023
+ * Need this mapped in at interrupt startup time
+ * Possibly need this mapped on demand anyway -
+ * EtherNAT USB driver needs to disable IRQ before
+ * startup!
  */
 
-#define IRQ_NAME(nr) atari_slow_irq_##nr##_handler(void)
-
-#define	BUILD_SLOW_IRQ(n)						   \
-asmlinkage void IRQ_NAME(n);						   \
-/* Dummy function to allow asm with operands.  */			   \
-void atari_slow_irq_##n##_dummy (void) {				   \
-__asm__ (__ALIGN_STR "\n"						   \
-"atari_slow_irq_" #n "_handler:\t"					   \
-"	addl	%6,%5\n"	/* preempt_count() += HARDIRQ_OFFSET */	   \
-	SAVE_ALL_INT "\n"						   \
-	GET_CURRENT(%%d0) "\n"						   \
-"	andb	#~(1<<(%c3&7)),%a4:w\n"	/* mask this interrupt */	   \
-	/* get old IPL from stack frame */				   \
-"	bfextu	%%sp@(%c2){#5,#3},%%d0\n"				   \
-"	movew	%%sr,%%d1\n"						   \
-"	bfins	%%d0,%%d1{#21,#3}\n"					   \
-"	movew	%%d1,%%sr\n"		/* set IPL = previous value */	   \
-"	addql	#1,%a0\n"						   \
-"	lea	%a1,%%a0\n"						   \
-"	pea	%%sp@\n"		/* push addr of frame */	   \
-"	movel	%%a0@(4),%%sp@-\n"	/* push handler data */		   \
-"	pea	(%c3+8)\n"		/* push int number */		   \
-"	movel	%%a0@,%%a0\n"						   \
-"	jbsr	%%a0@\n"		/* call the handler */		   \
-"	addql	#8,%%sp\n"						   \
-"	addql	#4,%%sp\n"						   \
-"	orw	#0x0600,%%sr\n"						   \
-"	andw	#0xfeff,%%sr\n"		/* set IPL = 6 again */		   \
-"	orb	#(1<<(%c3&7)),%a4:w\n"	/* now unmask the int again */	   \
-"	jbra	ret_from_interrupt\n"					   \
-	 : : "i" (&kstat_cpu(0).irqs[n+8]), "i" (&irq_handler[n+8]),	   \
-	     "n" (PT_OFF_SR), "n" (n),					   \
-	     "i" (n & 8 ? (n & 16 ? &tt_mfp.int_mk_a : &mfp.int_mk_a)	   \
-		        : (n & 16 ? &tt_mfp.int_mk_b : &mfp.int_mk_b)),	   \
-	     "m" (preempt_count()), "di" (HARDIRQ_OFFSET)		   \
-);									   \
-	for (;;);			/* fake noreturn */		   \
-}
+static unsigned char *enat_cpld;
 
-BUILD_SLOW_IRQ(0);
-BUILD_SLOW_IRQ(1);
-BUILD_SLOW_IRQ(2);
-BUILD_SLOW_IRQ(3);
-BUILD_SLOW_IRQ(4);
-BUILD_SLOW_IRQ(5);
-BUILD_SLOW_IRQ(6);
-BUILD_SLOW_IRQ(7);
-BUILD_SLOW_IRQ(8);
-BUILD_SLOW_IRQ(9);
-BUILD_SLOW_IRQ(10);
-BUILD_SLOW_IRQ(11);
-BUILD_SLOW_IRQ(12);
-BUILD_SLOW_IRQ(13);
-BUILD_SLOW_IRQ(14);
-BUILD_SLOW_IRQ(15);
-BUILD_SLOW_IRQ(16);
-BUILD_SLOW_IRQ(17);
-BUILD_SLOW_IRQ(18);
-BUILD_SLOW_IRQ(19);
-BUILD_SLOW_IRQ(20);
-BUILD_SLOW_IRQ(21);
-BUILD_SLOW_IRQ(22);
-BUILD_SLOW_IRQ(23);
-BUILD_SLOW_IRQ(24);
-BUILD_SLOW_IRQ(25);
-BUILD_SLOW_IRQ(26);
-BUILD_SLOW_IRQ(27);
-BUILD_SLOW_IRQ(28);
-BUILD_SLOW_IRQ(29);
-BUILD_SLOW_IRQ(30);
-BUILD_SLOW_IRQ(31);
-
-asm_irq_handler slow_handlers[32] = {
-	[0]	= atari_slow_irq_0_handler,
-	[1]	= atari_slow_irq_1_handler,
-	[2]	= atari_slow_irq_2_handler,
-	[3]	= atari_slow_irq_3_handler,
-	[4]	= atari_slow_irq_4_handler,
-	[5]	= atari_slow_irq_5_handler,
-	[6]	= atari_slow_irq_6_handler,
-	[7]	= atari_slow_irq_7_handler,
-	[8]	= atari_slow_irq_8_handler,
-	[9]	= atari_slow_irq_9_handler,
-	[10]	= atari_slow_irq_10_handler,
-	[11]	= atari_slow_irq_11_handler,
-	[12]	= atari_slow_irq_12_handler,
-	[13]	= atari_slow_irq_13_handler,
-	[14]	= atari_slow_irq_14_handler,
-	[15]	= atari_slow_irq_15_handler,
-	[16]	= atari_slow_irq_16_handler,
-	[17]	= atari_slow_irq_17_handler,
-	[18]	= atari_slow_irq_18_handler,
-	[19]	= atari_slow_irq_19_handler,
-	[20]	= atari_slow_irq_20_handler,
-	[21]	= atari_slow_irq_21_handler,
-	[22]	= atari_slow_irq_22_handler,
-	[23]	= atari_slow_irq_23_handler,
-	[24]	= atari_slow_irq_24_handler,
-	[25]	= atari_slow_irq_25_handler,
-	[26]	= atari_slow_irq_26_handler,
-	[27]	= atari_slow_irq_27_handler,
-	[28]	= atari_slow_irq_28_handler,
-	[29]	= atari_slow_irq_29_handler,
-	[30]	= atari_slow_irq_30_handler,
-	[31]	= atari_slow_irq_31_handler
-};
+static unsigned int atari_ethernat_startup(struct irq_data *data)
+{
+	int enat_num = 140 - data->irq + 1;
+
+	m68k_irq_startup(data);
+	/*
+	* map CPLD interrupt register
+	*/
+	if (!enat_cpld)
+		enat_cpld = (unsigned char *)ioremap((ATARI_ETHERNAT_PHYS_ADDR+0x23), 0x2);
+	/*
+	 * do _not_ enable the USB chip interrupt here - causes interrupt storm
+	 * and triggers dead interrupt watchdog
+	 * Need to reset the USB chip to a sane state in early startup before
+	 * removing this hack
+	 */
+	if (enat_num == 1)
+		*enat_cpld |= 1 << enat_num;
 
-asmlinkage void atari_fast_irq_handler( void );
-asmlinkage void atari_prio_irq_handler( void );
-
-/* Dummy function to allow asm with operands.  */
-void atari_fast_prio_irq_dummy (void) {
-__asm__ (__ALIGN_STR "\n"
-"atari_fast_irq_handler:\n\t"
-	"orw	#0x700,%%sr\n"		/* disable all interrupts */
-"atari_prio_irq_handler:\n\t"
-	"addl	%3,%2\n\t"		/* preempt_count() += HARDIRQ_OFFSET */
-	SAVE_ALL_INT "\n\t"
-	GET_CURRENT(%%d0) "\n\t"
-	/* get vector number from stack frame and convert to source */
-	"bfextu	%%sp@(%c1){#4,#10},%%d0\n\t"
-	"subw	#(0x40-8),%%d0\n\t"
-	"jpl	1f\n\t"
-	"addw	#(0x40-8-0x18),%%d0\n"
-    "1:\tlea	%a0,%%a0\n\t"
-	"addql	#1,%%a0@(%%d0:l:4)\n\t"
-	"lea	irq_handler,%%a0\n\t"
-	"lea	%%a0@(%%d0:l:8),%%a0\n\t"
-	"pea	%%sp@\n\t"		/* push frame address */
-	"movel	%%a0@(4),%%sp@-\n\t"	/* push handler data */
-	"movel	%%d0,%%sp@-\n\t"	/* push int number */
-	"movel	%%a0@,%%a0\n\t"
-	"jsr	%%a0@\n\t"		/* and call the handler */
-	"addql	#8,%%sp\n\t"
-	"addql	#4,%%sp\n\t"
-	"jbra	ret_from_interrupt"
-	 : : "i" (&kstat_cpu(0).irqs), "n" (PT_OFF_FORMATVEC),
-	     "m" (preempt_count()), "di" (HARDIRQ_OFFSET)
-);
-	for (;;);
+	return 0;
 }
 
-/* GK:
- * HBL IRQ handler for Falcon. Nobody needs it :-)
- * ++andreas: raise ipl to disable further HBLANK interrupts.
- */
-asmlinkage void falcon_hblhandler(void);
-asm(".text\n"
-__ALIGN_STR "\n\t"
-"falcon_hblhandler:\n\t"
-	"orw	#0x200,%sp@\n\t"	/* set saved ipl to 2 */
-	"rte");
+static void atari_ethernat_enable(struct irq_data *data)
+{
+	int enat_num = 140 - data->irq + 1;
+	/*
+	* map CPLD interrupt register
+	*/
+	if (!enat_cpld)
+		enat_cpld = (unsigned char *)ioremap((ATARI_ETHERNAT_PHYS_ADDR+0x23), 0x2);
+	*enat_cpld |= 1 << enat_num;
+}
 
-/* Defined in entry.S; only increments 'num_spurious' */
-asmlinkage void bad_interrupt(void);
+static void atari_ethernat_disable(struct irq_data *data)
+{
+	int enat_num = 140 - data->irq + 1;
+	/*
+	* map CPLD interrupt register
+	*/
+	if (!enat_cpld)
+		enat_cpld = (unsigned char *)ioremap((ATARI_ETHERNAT_PHYS_ADDR+0x23), 0x2);
+	*enat_cpld &= ~(1 << enat_num);
+}
 
-extern void atari_microwire_cmd( int cmd );
+static void atari_ethernat_shutdown(struct irq_data *data)
+{
+	int enat_num = 140 - data->irq + 1;
+	if (enat_cpld) {
+		*enat_cpld &= ~(1 << enat_num);
+		iounmap(enat_cpld);
+		enat_cpld = NULL;
+	}
+}
 
-extern int atari_SCC_reset_done;
+static struct irq_chip atari_ethernat_chip = {
+	.name		= "ethernat",
+	.irq_startup	= atari_ethernat_startup,
+	.irq_shutdown	= atari_ethernat_shutdown,
+	.irq_enable	= atari_ethernat_enable,
+	.irq_disable	= atari_ethernat_disable,
+};
 
 /*
  * void atari_init_IRQ (void)
@@ -333,24 +266,21 @@ extern int atari_SCC_reset_done;
 
 void __init atari_init_IRQ(void)
 {
-	int i;
-
-	/* initialize the vector table */
-	for (i = 0; i < NUM_INT_SOURCES; ++i) {
-		vectors[IRQ_SOURCE_TO_VECTOR(i)] = bad_interrupt;
-	}
+	m68k_setup_user_interrupt(VEC_USER, NUM_ATARI_SOURCES - IRQ_USER);
+	m68k_setup_irq_controller(&atari_irq_chip, handle_simple_irq, 1,
+				  NUM_ATARI_SOURCES - 1);
 
 	/* Initialize the MFP(s) */
 
 #ifdef ATARI_USE_SOFTWARE_EOI
-	mfp.vec_adr  = 0x48;	/* Software EOI-Mode */
+	st_mfp.vec_adr  = 0x48;	/* Software EOI-Mode */
 #else
-	mfp.vec_adr  = 0x40;	/* Automatic EOI-Mode */
+	st_mfp.vec_adr  = 0x40;	/* Automatic EOI-Mode */
 #endif
-	mfp.int_en_a = 0x00;	/* turn off MFP-Ints */
-	mfp.int_en_b = 0x00;
-	mfp.int_mk_a = 0xff;	/* no Masking */
-	mfp.int_mk_b = 0xff;
+	st_mfp.int_en_a = 0x00;	/* turn off MFP-Ints */
+	st_mfp.int_en_b = 0x00;
+	st_mfp.int_mk_a = 0xff;	/* no Masking */
+	st_mfp.int_mk_b = 0xff;
 
 	if (ATARIHW_PRESENT(TT_MFP)) {
 #ifdef ATARI_USE_SOFTWARE_EOI
@@ -365,9 +295,9 @@ void __init atari_init_IRQ(void)
 	}
 
 	if (ATARIHW_PRESENT(SCC) && !atari_SCC_reset_done) {
-		scc.cha_a_ctrl = 9;
+		atari_scc.cha_a_ctrl = 9;
 		MFPDELAY();
-		scc.cha_a_ctrl = (char) 0xc0; /* hardware reset */
+		atari_scc.cha_a_ctrl = (char) 0xc0; /* hardware reset */
 	}
 
 	if (ATARIHW_PRESENT(SCU)) {
@@ -378,15 +308,14 @@ void __init atari_init_IRQ(void)
 									 * enabled in VME mask
 									 */
 		tt_scu.vme_mask = 0x60;		/* enable MFP and SCC ints */
-	}
-	else {
+	} else {
 		/* If no SCU and no Hades, the HSYNC interrupt needs to be
 		 * disabled this way. (Else _inthandler in kernel/sys_call.S
 		 * gets overruns)
 		 */
 
-		if (!MACH_IS_HADES)
-			vectors[VEC_INT2] = falcon_hblhandler;
+		vectors[VEC_INT2] = falcon_hblhandler;
+		vectors[VEC_INT4] = falcon_hblhandler;
 	}
 
 	if (ATARIHW_PRESENT(PCM_8BIT) && ATARIHW_PRESENT(MICROWIRE)) {
@@ -401,184 +330,30 @@ void __init atari_init_IRQ(void)
 	/* Initialize the PSG: all sounds off, both ports output */
 	sound_ym.rd_data_reg_sel = 7;
 	sound_ym.wd_data = 0xff;
-}
-
-
-static irqreturn_t atari_call_irq_list( int irq, void *dev_id, struct pt_regs *fp )
-{
-	irq_node_t *node;
 
-	for (node = (irq_node_t *)dev_id; node; node = node->next)
-		node->handler(irq, node->dev_id, fp);
-	return IRQ_HANDLED;
-}
-
-
-/*
- * atari_request_irq : add an interrupt service routine for a particular
- *                     machine specific interrupt source.
- *                     If the addition was successful, it returns 0.
- */
-
-int atari_request_irq(unsigned int irq, irqreturn_t (*handler)(int, void *, struct pt_regs *),
-                      unsigned long flags, const char *devname, void *dev_id)
-{
-	int vector;
-	unsigned long oflags = flags;
+	m68k_setup_irq_controller(&atari_mfptimer_chip, handle_simple_irq,
+				  IRQ_MFP_TIMER1, 8);
 
-	/*
-	 * The following is a hack to make some PCI card drivers work,
-	 * which set the SA_SHIRQ flag.
-	 */
+	irq_set_status_flags(IRQ_MFP_TIMER1, IRQ_IS_POLLED);
+	irq_set_status_flags(IRQ_MFP_TIMER2, IRQ_IS_POLLED);
 
-	flags &= ~SA_SHIRQ;
+	/* prepare timer D data for use as poll interrupt */
+	/* set Timer D data Register - needs to be > 0 */
+	st_mfp.tim_dt_d = 254;	/* < 100 Hz */
+	/* start timer D, div = 1:100 */
+	st_mfp.tim_ct_cd = (st_mfp.tim_ct_cd & 0xf0) | 0x6;
 
-	if (flags == SA_INTERRUPT) {
-		printk ("%s: SA_INTERRUPT changed to IRQ_TYPE_SLOW for %s\n",
-			__FUNCTION__, devname);
-		flags = IRQ_TYPE_SLOW;
-	}
-	if (flags < IRQ_TYPE_SLOW || flags > IRQ_TYPE_PRIO) {
-		printk ("%s: Bad irq type 0x%lx <0x%lx> requested from %s\n",
-		        __FUNCTION__, flags, oflags, devname);
-		return -EINVAL;
-	}
-	if (!IS_VALID_INTNO(irq)) {
-		printk ("%s: Unknown irq %d requested from %s\n",
-		        __FUNCTION__, irq, devname);
-		return -ENXIO;
-	}
-	vector = IRQ_SOURCE_TO_VECTOR(irq);
+	/* request timer D dispatch handler */
+	if (request_irq(IRQ_MFP_TIMD, mfptimer_handler, IRQF_SHARED,
+			stmfp_base.name, &stmfp_base))
+		pr_err("Couldn't register %s interrupt\n", stmfp_base.name);
 
 	/*
-	 * Check type/source combination: slow ints are (currently)
-	 * only possible for MFP-interrupts.
+	 * EtherNAT ethernet / USB interrupt handlers
 	 */
-	if (flags == IRQ_TYPE_SLOW &&
-		(irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE)) {
-		printk ("%s: Slow irq requested for non-MFP source %d from %s\n",
-		        __FUNCTION__, irq, devname);
-		return -EINVAL;
-	}
-
-	if (vectors[vector] == bad_interrupt) {
-		/* int has no handler yet */
-		irq_handler[irq].handler = handler;
-		irq_handler[irq].dev_id  = dev_id;
-		irq_param[irq].flags   = flags;
-		irq_param[irq].devname = devname;
-		vectors[vector] =
-			(flags == IRQ_TYPE_SLOW) ? slow_handlers[irq-STMFP_SOURCE_BASE] :
-			(flags == IRQ_TYPE_FAST) ? atari_fast_irq_handler :
-			                          atari_prio_irq_handler;
-		/* If MFP int, also enable and umask it */
-		atari_turnon_irq(irq);
-		atari_enable_irq(irq);
 
-		return 0;
-	}
-	else if (irq_param[irq].flags == flags) {
-		/* old handler is of same type -> handlers can be chained */
-		irq_node_t *node;
-		unsigned long flags;
-
-		local_irq_save(flags);
-
-		if (irq_handler[irq].handler != atari_call_irq_list) {
-			/* Only one handler yet, make a node for this first one */
-			if (!(node = new_irq_node()))
-				return -ENOMEM;
-			node->handler = irq_handler[irq].handler;
-			node->dev_id  = irq_handler[irq].dev_id;
-			node->devname = irq_param[irq].devname;
-			node->next = NULL;
-
-			irq_handler[irq].handler = atari_call_irq_list;
-			irq_handler[irq].dev_id  = node;
-			irq_param[irq].devname   = "chained";
-		}
-
-		if (!(node = new_irq_node()))
-			return -ENOMEM;
-		node->handler = handler;
-		node->dev_id  = dev_id;
-		node->devname = devname;
-		/* new handlers are put in front of the queue */
-		node->next = irq_handler[irq].dev_id;
-		irq_handler[irq].dev_id = node;
-
-		local_irq_restore(flags);
-		return 0;
-	} else {
-		printk ("%s: Irq %d allocated by other type int (call from %s)\n",
-		        __FUNCTION__, irq, devname);
-		return -EBUSY;
-	}
-}
-
-void atari_free_irq(unsigned int irq, void *dev_id)
-{
-	unsigned long flags;
-	int vector;
-	irq_node_t **list, *node;
-
-	if (!IS_VALID_INTNO(irq)) {
-		printk("%s: Unknown irq %d\n", __FUNCTION__, irq);
-		return;
-	}
-
-	vector = IRQ_SOURCE_TO_VECTOR(irq);
-	if (vectors[vector] == bad_interrupt)
-		goto not_found;
-
-	local_irq_save(flags);
-
-	if (irq_handler[irq].handler != atari_call_irq_list) {
-		/* It's the only handler for the interrupt */
-		if (irq_handler[irq].dev_id != dev_id) {
-			local_irq_restore(flags);
-			goto not_found;
-		}
-		irq_handler[irq].handler = NULL;
-		irq_handler[irq].dev_id  = NULL;
-		irq_param[irq].devname   = NULL;
-		vectors[vector] = bad_interrupt;
-		/* If MFP int, also disable it */
-		atari_disable_irq(irq);
-		atari_turnoff_irq(irq);
-
-		local_irq_restore(flags);
-		return;
-	}
-
-	/* The interrupt is chained, find the irq on the list */
-	for(list = (irq_node_t **)&irq_handler[irq].dev_id; *list; list = &(*list)->next) {
-		if ((*list)->dev_id == dev_id) break;
-	}
-	if (!*list) {
-		local_irq_restore(flags);
-		goto not_found;
-	}
-
-	(*list)->handler = NULL; /* Mark it as free for reallocation */
-	*list = (*list)->next;
-
-	/* If there's now only one handler, unchain the interrupt, i.e. plug in
-	 * the handler directly again and omit atari_call_irq_list */
-	node = (irq_node_t *)irq_handler[irq].dev_id;
-	if (node && !node->next) {
-		irq_handler[irq].handler = node->handler;
-		irq_handler[irq].dev_id  = node->dev_id;
-		irq_param[irq].devname   = node->devname;
-		node->handler = NULL; /* Mark it as free for reallocation */
-	}
-
-	local_irq_restore(flags);
-	return;
-
-not_found:
-	printk("%s: tried to remove invalid irq\n", __FUNCTION__);
-	return;
+	m68k_setup_irq_controller(&atari_ethernat_chip, handle_simple_irq,
+				  139, 2);
 }
 
 
@@ -587,62 +362,30 @@ not_found:
  * hardware with a programmable int vector (probably a VME board).
  */
 
-unsigned long atari_register_vme_int(void)
+unsigned int atari_register_vme_int(void)
 {
 	int i;
 
-	for(i = 0; i < 32; i++)
-		if((free_vme_vec_bitmap & (1 << i)) == 0)
+	for (i = 0; i < 32; i++)
+		if ((free_vme_vec_bitmap & (1 << i)) == 0)
 			break;
 
-	if(i == 16)
+	if (i == 16)
 		return 0;
 
 	free_vme_vec_bitmap |= 1 << i;
-	return (VME_SOURCE_BASE + i);
+	return VME_SOURCE_BASE + i;
 }
+EXPORT_SYMBOL(atari_register_vme_int);
 
 
-void atari_unregister_vme_int(unsigned long irq)
+void atari_unregister_vme_int(unsigned int irq)
 {
-	if(irq >= VME_SOURCE_BASE && irq < VME_SOURCE_BASE + VME_MAX_SOURCES) {
+	if (irq >= VME_SOURCE_BASE && irq < VME_SOURCE_BASE + VME_MAX_SOURCES) {
 		irq -= VME_SOURCE_BASE;
 		free_vme_vec_bitmap &= ~(1 << irq);
 	}
 }
-
-
-int show_atari_interrupts(struct seq_file *p, void *v)
-{
-	int i;
-
-	for (i = 0; i < NUM_INT_SOURCES; ++i) {
-		if (vectors[IRQ_SOURCE_TO_VECTOR(i)] == bad_interrupt)
-			continue;
-		if (i < STMFP_SOURCE_BASE)
-			seq_printf(p, "auto %2d: %10u ",
-				       i, kstat_cpu(0).irqs[i]);
-		else
-			seq_printf(p, "vec $%02x: %10u ",
-				       IRQ_SOURCE_TO_VECTOR(i),
-				       kstat_cpu(0).irqs[i]);
-
-		if (irq_handler[i].handler != atari_call_irq_list) {
-			seq_printf(p, "%s\n", irq_param[i].devname);
-		}
-		else {
-			irq_node_t *n;
-			for( n = (irq_node_t *)irq_handler[i].dev_id; n; n = n->next ) {
-				seq_printf(p, "%s\n", n->devname);
-				if (n->next)
-					seq_puts(p, "                    " );
-			}
-		}
-	}
-	if (num_spurious)
-		seq_printf(p, "spurio.: %10u\n", num_spurious);
-
-	return 0;
-}
+EXPORT_SYMBOL(atari_unregister_vme_int);
 
 
diff --git a/arch/m68k/atari/atakeyb.c b/arch/m68k/atari/atakeyb.c
new file mode 100644
index 00000000000..95022b04b62
--- /dev/null
+++ b/arch/m68k/atari/atakeyb.c
@@ -0,0 +1,638 @@
+/*
+ * Atari Keyboard driver for 680x0 Linux
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+/*
+ * Atari support by Robert de Vries
+ * enhanced by Bjoern Brauel and Roman Hodek
+ *
+ * 2.6 and input cleanup (removed autorepeat stuff) for 2.6.21
+ * 06/07 Michael Schmitz
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/keyboard.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/kd.h>
+#include <linux/random.h>
+#include <linux/init.h>
+#include <linux/kbd_kern.h>
+
+#include <asm/atariints.h>
+#include <asm/atarihw.h>
+#include <asm/atarikb.h>
+#include <asm/atari_joystick.h>
+#include <asm/irq.h>
+
+
+/* Hook for MIDI serial driver */
+void (*atari_MIDI_interrupt_hook) (void);
+/* Hook for keyboard inputdev  driver */
+void (*atari_input_keyboard_interrupt_hook) (unsigned char, char);
+/* Hook for mouse inputdev  driver */
+void (*atari_input_mouse_interrupt_hook) (char *);
+EXPORT_SYMBOL(atari_input_keyboard_interrupt_hook);
+EXPORT_SYMBOL(atari_input_mouse_interrupt_hook);
+
+/* variables for IKBD self test: */
+
+/* state: 0: off; >0: in progress; >1: 0xf1 received */
+static volatile int ikbd_self_test;
+/* timestamp when last received a char */
+static volatile unsigned long self_test_last_rcv;
+/* bitmap of keys reported as broken */
+static unsigned long broken_keys[128/(sizeof(unsigned long)*8)] = { 0, };
+
+#define BREAK_MASK	(0x80)
+
+/*
+ * ++roman: The following changes were applied manually:
+ *
+ *  - The Alt (= Meta) key works in combination with Shift and
+ *    Control, e.g. Alt+Shift+a sends Meta-A (0xc1), Alt+Control+A sends
+ *    Meta-Ctrl-A (0x81) ...
+ *
+ *  - The parentheses on the keypad send '(' and ')' with all
+ *    modifiers (as would do e.g. keypad '+'), but they cannot be used as
+ *    application keys (i.e. sending Esc O c).
+ *
+ *  - HELP and UNDO are mapped to be F21 and F24, resp, that send the
+ *    codes "\E[M" and "\E[P". (This is better than the old mapping to
+ *    F11 and F12, because these codes are on Shift+F1/2 anyway.) This
+ *    way, applications that allow their own keyboard mappings
+ *    (e.g. tcsh, X Windows) can be configured to use them in the way
+ *    the label suggests (providing help or undoing).
+ *
+ *  - Console switching is done with Alt+Fx (consoles 1..10) and
+ *    Shift+Alt+Fx (consoles 11..20).
+ *
+ *  - The misc. special function implemented in the kernel are mapped
+ *    to the following key combinations:
+ *
+ *      ClrHome          -> Home/Find
+ *      Shift + ClrHome  -> End/Select
+ *      Shift + Up       -> Page Up
+ *      Shift + Down     -> Page Down
+ *      Alt + Help       -> show system status
+ *      Shift + Help     -> show memory info
+ *      Ctrl + Help      -> show registers
+ *      Ctrl + Alt + Del -> Reboot
+ *      Alt + Undo       -> switch to last console
+ *      Shift + Undo     -> send interrupt
+ *      Alt + Insert     -> stop/start output (same as ^S/^Q)
+ *      Alt + Up         -> Scroll back console (if implemented)
+ *      Alt + Down       -> Scroll forward console (if implemented)
+ *      Alt + CapsLock   -> NumLock
+ *
+ * ++Andreas:
+ *
+ *  - Help mapped to K_HELP
+ *  - Undo mapped to K_UNDO (= K_F246)
+ *  - Keypad Left/Right Parenthesis mapped to new K_PPAREN[LR]
+ */
+
+typedef enum kb_state_t {
+	KEYBOARD, AMOUSE, RMOUSE, JOYSTICK, CLOCK, RESYNC
+} KB_STATE_T;
+
+#define	IS_SYNC_CODE(sc)	((sc) >= 0x04 && (sc) <= 0xfb)
+
+typedef struct keyboard_state {
+	unsigned char buf[6];
+	int len;
+	KB_STATE_T state;
+} KEYBOARD_STATE;
+
+KEYBOARD_STATE kb_state;
+
+/* ++roman: If a keyboard overrun happened, we can't tell in general how much
+ * bytes have been lost and in which state of the packet structure we are now.
+ * This usually causes keyboards bytes to be interpreted as mouse movements
+ * and vice versa, which is very annoying. It seems better to throw away some
+ * bytes (that are usually mouse bytes) than to misinterpret them. Therefore I
+ * introduced the RESYNC state for IKBD data. In this state, the bytes up to
+ * one that really looks like a key event (0x04..0xf2) or the start of a mouse
+ * packet (0xf8..0xfb) are thrown away, but at most 2 bytes. This at least
+ * speeds up the resynchronization of the event structure, even if maybe a
+ * mouse movement is lost. However, nothing is perfect. For bytes 0x01..0x03,
+ * it's really hard to decide whether they're mouse or keyboard bytes. Since
+ * overruns usually occur when moving the Atari mouse rapidly, they're seen as
+ * mouse bytes here. If this is wrong, only a make code of the keyboard gets
+ * lost, which isn't too bad. Losing a break code would be disastrous,
+ * because then the keyboard repeat strikes...
+ */
+
+static irqreturn_t atari_keyboard_interrupt(int irq, void *dummy)
+{
+	u_char acia_stat;
+	int scancode;
+	int break_flag;
+
+repeat:
+	if (acia.mid_ctrl & ACIA_IRQ)
+		if (atari_MIDI_interrupt_hook)
+			atari_MIDI_interrupt_hook();
+	acia_stat = acia.key_ctrl;
+	/* check out if the interrupt came from this ACIA */
+	if (!((acia_stat | acia.mid_ctrl) & ACIA_IRQ))
+		return IRQ_HANDLED;
+
+	if (acia_stat & ACIA_OVRN) {
+		/* a very fast typist or a slow system, give a warning */
+		/* ...happens often if interrupts were disabled for too long */
+		printk(KERN_DEBUG "Keyboard overrun\n");
+		scancode = acia.key_data;
+		if (ikbd_self_test)
+			/* During self test, don't do resyncing, just process the code */
+			goto interpret_scancode;
+		else if (IS_SYNC_CODE(scancode)) {
+			/* This code seem already to be the start of a new packet or a
+			 * single scancode */
+			kb_state.state = KEYBOARD;
+			goto interpret_scancode;
+		} else {
+			/* Go to RESYNC state and skip this byte */
+			kb_state.state = RESYNC;
+			kb_state.len = 1;	/* skip max. 1 another byte */
+			goto repeat;
+		}
+	}
+
+	if (acia_stat & ACIA_RDRF) {
+		/* received a character */
+		scancode = acia.key_data;	/* get it or reset the ACIA, I'll get it! */
+		tasklet_schedule(&keyboard_tasklet);
+	interpret_scancode:
+		switch (kb_state.state) {
+		case KEYBOARD:
+			switch (scancode) {
+			case 0xF7:
+				kb_state.state = AMOUSE;
+				kb_state.len = 0;
+				break;
+
+			case 0xF8:
+			case 0xF9:
+			case 0xFA:
+			case 0xFB:
+				kb_state.state = RMOUSE;
+				kb_state.len = 1;
+				kb_state.buf[0] = scancode;
+				break;
+
+			case 0xFC:
+				kb_state.state = CLOCK;
+				kb_state.len = 0;
+				break;
+
+			case 0xFE:
+			case 0xFF:
+				kb_state.state = JOYSTICK;
+				kb_state.len = 1;
+				kb_state.buf[0] = scancode;
+				break;
+
+			case 0xF1:
+				/* during self-test, note that 0xf1 received */
+				if (ikbd_self_test) {
+					++ikbd_self_test;
+					self_test_last_rcv = jiffies;
+					break;
+				}
+				/* FALL THROUGH */
+
+			default:
+				break_flag = scancode & BREAK_MASK;
+				scancode &= ~BREAK_MASK;
+				if (ikbd_self_test) {
+					/* Scancodes sent during the self-test stand for broken
+					 * keys (keys being down). The code *should* be a break
+					 * code, but nevertheless some AT keyboard interfaces send
+					 * make codes instead. Therefore, simply ignore
+					 * break_flag...
+					 */
+					int keyval, keytyp;
+
+					set_bit(scancode, broken_keys);
+					self_test_last_rcv = jiffies;
+					/* new Linux scancodes; approx. */
+					keyval = scancode;
+					keytyp = KTYP(keyval) - 0xf0;
+					keyval = KVAL(keyval);
+
+					printk(KERN_WARNING "Key with scancode %d ", scancode);
+					if (keytyp == KT_LATIN || keytyp == KT_LETTER) {
+						if (keyval < ' ')
+							printk("('^%c') ", keyval + '@');
+						else
+							printk("('%c') ", keyval);
+					}
+					printk("is broken -- will be ignored.\n");
+					break;
+				} else if (test_bit(scancode, broken_keys))
+					break;
+
+				if (atari_input_keyboard_interrupt_hook)
+					atari_input_keyboard_interrupt_hook((unsigned char)scancode, !break_flag);
+				break;
+			}
+			break;
+
+		case AMOUSE:
+			kb_state.buf[kb_state.len++] = scancode;
+			if (kb_state.len == 5) {
+				kb_state.state = KEYBOARD;
+				/* not yet used */
+				/* wake up someone waiting for this */
+			}
+			break;
+
+		case RMOUSE:
+			kb_state.buf[kb_state.len++] = scancode;
+			if (kb_state.len == 3) {
+				kb_state.state = KEYBOARD;
+				if (atari_input_mouse_interrupt_hook)
+					atari_input_mouse_interrupt_hook(kb_state.buf);
+			}
+			break;
+
+		case JOYSTICK:
+			kb_state.buf[1] = scancode;
+			kb_state.state = KEYBOARD;
+#ifdef FIXED_ATARI_JOYSTICK
+			atari_joystick_interrupt(kb_state.buf);
+#endif
+			break;
+
+		case CLOCK:
+			kb_state.buf[kb_state.len++] = scancode;
+			if (kb_state.len == 6) {
+				kb_state.state = KEYBOARD;
+				/* wake up someone waiting for this.
+				   But will this ever be used, as Linux keeps its own time.
+				   Perhaps for synchronization purposes? */
+				/* wake_up_interruptible(&clock_wait); */
+			}
+			break;
+
+		case RESYNC:
+			if (kb_state.len <= 0 || IS_SYNC_CODE(scancode)) {
+				kb_state.state = KEYBOARD;
+				goto interpret_scancode;
+			}
+			kb_state.len--;
+			break;
+		}
+	}
+
+#if 0
+	if (acia_stat & ACIA_CTS)
+		/* cannot happen */;
+#endif
+
+	if (acia_stat & (ACIA_FE | ACIA_PE)) {
+		printk("Error in keyboard communication\n");
+	}
+
+	/* handle_scancode() can take a lot of time, so check again if
+	 * some character arrived
+	 */
+	goto repeat;
+}
+
+/*
+ * I write to the keyboard without using interrupts, I poll instead.
+ * This takes for the maximum length string allowed (7) at 7812.5 baud
+ * 8 data 1 start 1 stop bit: 9.0 ms
+ * If this takes too long for normal operation, interrupt driven writing
+ * is the solution. (I made a feeble attempt in that direction but I
+ * kept it simple for now.)
+ */
+void ikbd_write(const char *str, int len)
+{
+	u_char acia_stat;
+
+	if ((len < 1) || (len > 7))
+		panic("ikbd: maximum string length exceeded");
+	while (len) {
+		acia_stat = acia.key_ctrl;
+		if (acia_stat & ACIA_TDRE) {
+			acia.key_data = *str++;
+			len--;
+		}
+	}
+}
+
+/* Reset (without touching the clock) */
+void ikbd_reset(void)
+{
+	static const char cmd[2] = { 0x80, 0x01 };
+
+	ikbd_write(cmd, 2);
+
+	/*
+	 * if all's well code 0xF1 is returned, else the break codes of
+	 * all keys making contact
+	 */
+}
+
+/* Set mouse button action */
+void ikbd_mouse_button_action(int mode)
+{
+	char cmd[2] = { 0x07, mode };
+
+	ikbd_write(cmd, 2);
+}
+
+/* Set relative mouse position reporting */
+void ikbd_mouse_rel_pos(void)
+{
+	static const char cmd[1] = { 0x08 };
+
+	ikbd_write(cmd, 1);
+}
+EXPORT_SYMBOL(ikbd_mouse_rel_pos);
+
+/* Set absolute mouse position reporting */
+void ikbd_mouse_abs_pos(int xmax, int ymax)
+{
+	char cmd[5] = { 0x09, xmax>>8, xmax&0xFF, ymax>>8, ymax&0xFF };
+
+	ikbd_write(cmd, 5);
+}
+
+/* Set mouse keycode mode */
+void ikbd_mouse_kbd_mode(int dx, int dy)
+{
+	char cmd[3] = { 0x0A, dx, dy };
+
+	ikbd_write(cmd, 3);
+}
+
+/* Set mouse threshold */
+void ikbd_mouse_thresh(int x, int y)
+{
+	char cmd[3] = { 0x0B, x, y };
+
+	ikbd_write(cmd, 3);
+}
+EXPORT_SYMBOL(ikbd_mouse_thresh);
+
+/* Set mouse scale */
+void ikbd_mouse_scale(int x, int y)
+{
+	char cmd[3] = { 0x0C, x, y };
+
+	ikbd_write(cmd, 3);
+}
+
+/* Interrogate mouse position */
+void ikbd_mouse_pos_get(int *x, int *y)
+{
+	static const char cmd[1] = { 0x0D };
+
+	ikbd_write(cmd, 1);
+
+	/* wait for returning bytes */
+}
+
+/* Load mouse position */
+void ikbd_mouse_pos_set(int x, int y)
+{
+	char cmd[6] = { 0x0E, 0x00, x>>8, x&0xFF, y>>8, y&0xFF };
+
+	ikbd_write(cmd, 6);
+}
+
+/* Set Y=0 at bottom */
+void ikbd_mouse_y0_bot(void)
+{
+	static const char cmd[1] = { 0x0F };
+
+	ikbd_write(cmd, 1);
+}
+
+/* Set Y=0 at top */
+void ikbd_mouse_y0_top(void)
+{
+	static const char cmd[1] = { 0x10 };
+
+	ikbd_write(cmd, 1);
+}
+EXPORT_SYMBOL(ikbd_mouse_y0_top);
+
+/* Resume */
+void ikbd_resume(void)
+{
+	static const char cmd[1] = { 0x11 };
+
+	ikbd_write(cmd, 1);
+}
+
+/* Disable mouse */
+void ikbd_mouse_disable(void)
+{
+	static const char cmd[1] = { 0x12 };
+
+	ikbd_write(cmd, 1);
+}
+EXPORT_SYMBOL(ikbd_mouse_disable);
+
+/* Pause output */
+void ikbd_pause(void)
+{
+	static const char cmd[1] = { 0x13 };
+
+	ikbd_write(cmd, 1);
+}
+
+/* Set joystick event reporting */
+void ikbd_joystick_event_on(void)
+{
+	static const char cmd[1] = { 0x14 };
+
+	ikbd_write(cmd, 1);
+}
+
+/* Set joystick interrogation mode */
+void ikbd_joystick_event_off(void)
+{
+	static const char cmd[1] = { 0x15 };
+
+	ikbd_write(cmd, 1);
+}
+
+/* Joystick interrogation */
+void ikbd_joystick_get_state(void)
+{
+	static const char cmd[1] = { 0x16 };
+
+	ikbd_write(cmd, 1);
+}
+
+#if 0
+/* This disables all other ikbd activities !!!! */
+/* Set joystick monitoring */
+void ikbd_joystick_monitor(int rate)
+{
+	static const char cmd[2] = { 0x17, rate };
+
+	ikbd_write(cmd, 2);
+
+	kb_state.state = JOYSTICK_MONITOR;
+}
+#endif
+
+/* some joystick routines not in yet (0x18-0x19) */
+
+/* Disable joysticks */
+void ikbd_joystick_disable(void)
+{
+	static const char cmd[1] = { 0x1A };
+
+	ikbd_write(cmd, 1);
+}
+
+/* Time-of-day clock set */
+void ikbd_clock_set(int year, int month, int day, int hour, int minute, int second)
+{
+	char cmd[7] = { 0x1B, year, month, day, hour, minute, second };
+
+	ikbd_write(cmd, 7);
+}
+
+/* Interrogate time-of-day clock */
+void ikbd_clock_get(int *year, int *month, int *day, int *hour, int *minute, int second)
+{
+	static const char cmd[1] = { 0x1C };
+
+	ikbd_write(cmd, 1);
+}
+
+/* Memory load */
+void ikbd_mem_write(int address, int size, char *data)
+{
+	panic("Attempt to write data into keyboard memory");
+}
+
+/* Memory read */
+void ikbd_mem_read(int address, char data[6])
+{
+	char cmd[3] = { 0x21, address>>8, address&0xFF };
+
+	ikbd_write(cmd, 3);
+
+	/* receive data and put it in data */
+}
+
+/* Controller execute */
+void ikbd_exec(int address)
+{
+	char cmd[3] = { 0x22, address>>8, address&0xFF };
+
+	ikbd_write(cmd, 3);
+}
+
+/* Status inquiries (0x87-0x9A) not yet implemented */
+
+/* Set the state of the caps lock led. */
+void atari_kbd_leds(unsigned int leds)
+{
+	char cmd[6] = {32, 0, 4, 1, 254 + ((leds & 4) != 0), 0};
+
+	ikbd_write(cmd, 6);
+}
+
+/*
+ * The original code sometimes left the interrupt line of
+ * the ACIAs low forever. I hope, it is fixed now.
+ *
+ * Martin Rogge, 20 Aug 1995
+ */
+
+static int atari_keyb_done = 0;
+
+int atari_keyb_init(void)
+{
+	int error;
+
+	if (atari_keyb_done)
+		return 0;
+
+	kb_state.state = KEYBOARD;
+	kb_state.len = 0;
+
+	error = request_irq(IRQ_MFP_ACIA, atari_keyboard_interrupt,
+			    IRQ_TYPE_SLOW, "keyboard,mouse,MIDI",
+			    atari_keyboard_interrupt);
+	if (error)
+		return error;
+
+	atari_turnoff_irq(IRQ_MFP_ACIA);
+	do {
+		/* reset IKBD ACIA */
+		acia.key_ctrl = ACIA_RESET |
+				((atari_switches & ATARI_SWITCH_IKBD) ?
+				 ACIA_RHTID : 0);
+		(void)acia.key_ctrl;
+		(void)acia.key_data;
+
+		/* reset MIDI ACIA */
+		acia.mid_ctrl = ACIA_RESET |
+				((atari_switches & ATARI_SWITCH_MIDI) ?
+				 ACIA_RHTID : 0);
+		(void)acia.mid_ctrl;
+		(void)acia.mid_data;
+
+		/* divide 500kHz by 64 gives 7812.5 baud */
+		/* 8 data no parity 1 start 1 stop bit */
+		/* receive interrupt enabled */
+		/* RTS low (except if switch selected), transmit interrupt disabled */
+		acia.key_ctrl = (ACIA_DIV64|ACIA_D8N1S|ACIA_RIE) |
+				((atari_switches & ATARI_SWITCH_IKBD) ?
+				 ACIA_RHTID : ACIA_RLTID);
+
+		acia.mid_ctrl = ACIA_DIV16 | ACIA_D8N1S |
+				((atari_switches & ATARI_SWITCH_MIDI) ?
+				 ACIA_RHTID : 0);
+
+	/* make sure the interrupt line is up */
+	} while ((st_mfp.par_dt_reg & 0x10) == 0);
+
+	/* enable ACIA Interrupts */
+	st_mfp.active_edge &= ~0x10;
+	atari_turnon_irq(IRQ_MFP_ACIA);
+
+	ikbd_self_test = 1;
+	ikbd_reset();
+	/* wait for a period of inactivity (here: 0.25s), then assume the IKBD's
+	 * self-test is finished */
+	self_test_last_rcv = jiffies;
+	while (time_before(jiffies, self_test_last_rcv + HZ/4))
+		barrier();
+	/* if not incremented: no 0xf1 received */
+	if (ikbd_self_test == 1)
+		printk(KERN_ERR "WARNING: keyboard self test failed!\n");
+	ikbd_self_test = 0;
+
+	ikbd_mouse_disable();
+	ikbd_joystick_disable();
+
+#ifdef FIXED_ATARI_JOYSTICK
+	atari_joystick_init();
+#endif
+
+	// flag init done
+	atari_keyb_done = 1;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(atari_keyb_init);
diff --git a/arch/m68k/atari/atari_ksyms.c b/arch/m68k/atari/atari_ksyms.c
deleted file mode 100644
index a0475715153..00000000000
--- a/arch/m68k/atari/atari_ksyms.c
+++ /dev/null
@@ -1,35 +0,0 @@
-#include <linux/module.h>
-
-#include <asm/ptrace.h>
-#include <asm/traps.h>
-#include <asm/atarihw.h>
-#include <asm/atariints.h>
-#include <asm/atarikb.h>
-#include <asm/atari_joystick.h>
-#include <asm/atari_stdma.h>
-#include <asm/atari_stram.h>
-
-extern void atari_microwire_cmd( int cmd );
-extern int atari_MFP_init_done;
-extern int atari_SCC_init_done;
-extern int atari_SCC_reset_done;
-
-EXPORT_SYMBOL(atari_mch_cookie);
-EXPORT_SYMBOL(atari_mch_type);
-EXPORT_SYMBOL(atari_hw_present);
-EXPORT_SYMBOL(atari_switches);
-EXPORT_SYMBOL(atari_dont_touch_floppy_select);
-EXPORT_SYMBOL(atari_register_vme_int);
-EXPORT_SYMBOL(atari_unregister_vme_int);
-EXPORT_SYMBOL(stdma_lock);
-EXPORT_SYMBOL(stdma_release);
-EXPORT_SYMBOL(stdma_others_waiting);
-EXPORT_SYMBOL(stdma_islocked);
-EXPORT_SYMBOL(atari_stram_alloc);
-EXPORT_SYMBOL(atari_stram_free);
-
-EXPORT_SYMBOL(atari_MFP_init_done);
-EXPORT_SYMBOL(atari_SCC_init_done);
-EXPORT_SYMBOL(atari_SCC_reset_done);
-
-EXPORT_SYMBOL(atari_microwire_cmd);
diff --git a/arch/m68k/atari/atasound.c b/arch/m68k/atari/atasound.c
index ee04250eb56..1c1181ebb94 100644
--- a/arch/m68k/atari/atasound.c
+++ b/arch/m68k/atari/atasound.c
@@ -22,9 +22,9 @@
 #include <linux/fcntl.h>
 #include <linux/errno.h>
 #include <linux/mm.h>
+#include <linux/module.h>
 
 #include <asm/atarihw.h>
-#include <asm/system.h>
 #include <asm/irq.h>
 #include <asm/pgtable.h>
 #include <asm/atariints.h>
@@ -43,6 +43,7 @@ void atari_microwire_cmd (int cmd)
 	while( tt_microwire.mask != 0x7ff)
 		;
 }
+EXPORT_SYMBOL(atari_microwire_cmd);
 
 
 /* PSG base frequency */
diff --git a/arch/m68k/atari/atasound.h b/arch/m68k/atari/atasound.h
deleted file mode 100644
index 1362762b8c0..00000000000
--- a/arch/m68k/atari/atasound.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Minor numbers for the sound driver.
- *
- * Unfortunately Creative called the codec chip of SB as a DSP. For this
- * reason the /dev/dsp is reserved for digitized audio use. There is a
- * device for true DSP processors but it will be called something else.
- * In v3.0 it's /dev/sndproc but this could be a temporary solution.
- */
-
-#define SND_NDEVS	256	/* Number of supported devices */
-#define SND_DEV_CTL	0	/* Control port /dev/mixer */
-#define SND_DEV_SEQ	1	/* Sequencer output /dev/sequencer (FM
-				   synthesizer and MIDI output) */
-#define SND_DEV_MIDIN	2	/* Raw midi access */
-#define SND_DEV_DSP	3	/* Digitized voice /dev/dsp */
-#define SND_DEV_AUDIO	4	/* Sparc compatible /dev/audio */
-#define SND_DEV_DSP16	5	/* Like /dev/dsp but 16 bits/sample */
-#define SND_DEV_STATUS	6	/* /dev/sndstat */
-/* #7 not in use now. Was in 2.4. Free for use after v3.0. */
-#define SND_DEV_SEQ2	8	/* /dev/sequencer, level 2 interface */
-#define SND_DEV_SNDPROC 9	/* /dev/sndproc for programmable devices */
-#define SND_DEV_PSS	SND_DEV_SNDPROC
-
-#define DSP_DEFAULT_SPEED	8000
-
-#define ON		1
-#define OFF		0
-
-#define MAX_AUDIO_DEV	5
-#define MAX_MIXER_DEV	2
-#define MAX_SYNTH_DEV	3
-#define MAX_MIDI_DEV	6
-#define MAX_TIMER_DEV	3
diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c
index 9261d2deeaf..01a62161b08 100644
--- a/arch/m68k/atari/config.c
+++ b/arch/m68k/atari/config.c
@@ -24,106 +24,66 @@
  * Miscellaneous atari stuff
  */
 
-#include <linux/config.h>
 #include <linux/types.h>
 #include <linux/mm.h>
+#include <linux/seq_file.h>
 #include <linux/console.h>
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/usb/isp116x.h>
 #include <linux/vt_kern.h>
+#include <linux/module.h>
 
 #include <asm/bootinfo.h>
+#include <asm/bootinfo-atari.h>
+#include <asm/byteorder.h>
 #include <asm/setup.h>
 #include <asm/atarihw.h>
 #include <asm/atariints.h>
 #include <asm/atari_stram.h>
-#include <asm/system.h>
 #include <asm/machdep.h>
 #include <asm/hwtest.h>
 #include <asm/io.h>
 
 u_long atari_mch_cookie;
+EXPORT_SYMBOL(atari_mch_cookie);
+
 u_long atari_mch_type;
+EXPORT_SYMBOL(atari_mch_type);
+
 struct atari_hw_present atari_hw_present;
+EXPORT_SYMBOL(atari_hw_present);
+
 u_long atari_switches;
+EXPORT_SYMBOL(atari_switches);
+
 int atari_dont_touch_floppy_select;
+EXPORT_SYMBOL(atari_dont_touch_floppy_select);
+
 int atari_rtc_year_offset;
 
 /* local function prototypes */
-static void atari_reset( void );
-#ifdef CONFIG_ATARI_FLOPPY
-extern void atari_floppy_setup(char *, int *);
-#endif
+static void atari_reset(void);
 static void atari_get_model(char *model);
-static int atari_get_hardware_list(char *buffer);
+static void atari_get_hardware_list(struct seq_file *m);
 
 /* atari specific irq functions */
 extern void atari_init_IRQ (void);
-extern int atari_request_irq (unsigned int irq, irqreturn_t (*handler)(int, void *, struct pt_regs *),
-                              unsigned long flags, const char *devname, void *dev_id);
-extern void atari_free_irq (unsigned int irq, void *dev_id);
-extern void atari_enable_irq (unsigned int);
-extern void atari_disable_irq (unsigned int);
-extern int show_atari_interrupts (struct seq_file *, void *);
-extern void atari_mksound( unsigned int count, unsigned int ticks );
+extern void atari_mksound(unsigned int count, unsigned int ticks);
 #ifdef CONFIG_HEARTBEAT
-static void atari_heartbeat( int on );
+static void atari_heartbeat(int on);
 #endif
 
 /* atari specific timer functions (in time.c) */
-extern void atari_sched_init(irqreturn_t (*)(int, void *, struct pt_regs *));
-extern unsigned long atari_gettimeoffset (void);
+extern void atari_sched_init(irq_handler_t);
+extern u32 atari_gettimeoffset(void);
 extern int atari_mste_hwclk (int, struct rtc_time *);
 extern int atari_tt_hwclk (int, struct rtc_time *);
 extern int atari_mste_set_clock_mmss (unsigned long);
 extern int atari_tt_set_clock_mmss (unsigned long);
 
-/* atari specific debug functions (in debug.c) */
-extern void atari_debug_init(void);
-
-
-/* I've moved hwreg_present() and hwreg_present_bywrite() out into
- * mm/hwtest.c, to avoid having multiple copies of the same routine
- * in the kernel [I wanted them in hp300 and they were already used
- * in the nubus code. NB: I don't have an Atari so this might (just
- * conceivably) break something.
- * I've preserved the #if 0 version of hwreg_present_bywrite() here
- * for posterity.
- *   -- Peter Maydell <pmaydell@chiark.greenend.org.uk>, 05/1998
- */
-
-#if 0
-static int __init
-hwreg_present_bywrite(volatile void *regp, unsigned char val)
-{
-    int		ret;
-    long	save_sp, save_vbr;
-    static long tmp_vectors[3] = { [2] = (long)&&after_test };
-
-    __asm__ __volatile__
-	(	"movec	%/vbr,%2\n\t"	/* save vbr value            */
-                "movec	%4,%/vbr\n\t"	/* set up temporary vectors  */
-		"movel	%/sp,%1\n\t"	/* save sp                   */
-		"moveq	#0,%0\n\t"	/* assume not present        */
-		"moveb	%5,%3@\n\t"	/* write the hardware reg    */
-		"cmpb	%3@,%5\n\t"	/* compare it                */
-		"seq	%0"		/* comes here only if reg    */
-                                        /* is present                */
-		: "=d&" (ret), "=r&" (save_sp), "=r&" (save_vbr)
-		: "a" (regp), "r" (tmp_vectors), "d" (val)
-                );
-  after_test:
-    __asm__ __volatile__
-      (	"movel	%0,%/sp\n\t"		/* restore sp                */
-        "movec	%1,%/vbr"			/* restore vbr               */
-        : : "r" (save_sp), "r" (save_vbr) : "sp"
-	);
-
-    return( ret );
-}
-#endif
-
 
 /* ++roman: This is a more elaborate test for an SCC chip, since the plain
  * Medusa board generates DTACK at the SCC's standard addresses, but a SCC
@@ -133,26 +93,34 @@ hwreg_present_bywrite(volatile void *regp, unsigned char val)
  * should be readable without trouble (from channel A!).
  */
 
-static int __init scc_test( volatile char *ctla )
+static int __init scc_test(volatile char *ctla)
 {
-	if (!hwreg_present( ctla ))
-		return( 0 );
+	if (!hwreg_present(ctla))
+		return 0;
 	MFPDELAY();
 
-	*ctla = 2; MFPDELAY();
-	*ctla = 0x40; MFPDELAY();
+	*ctla = 2;
+	MFPDELAY();
+	*ctla = 0x40;
+	MFPDELAY();
 
-	*ctla = 2; MFPDELAY();
-	if (*ctla != 0x40) return( 0 );
+	*ctla = 2;
+	MFPDELAY();
+	if (*ctla != 0x40)
+		return 0;
 	MFPDELAY();
 
-	*ctla = 2; MFPDELAY();
-	*ctla = 0x60; MFPDELAY();
+	*ctla = 2;
+	MFPDELAY();
+	*ctla = 0x60;
+	MFPDELAY();
 
-	*ctla = 2; MFPDELAY();
-	if (*ctla != 0x60) return( 0 );
+	*ctla = 2;
+	MFPDELAY();
+	if (*ctla != 0x60)
+		return 0;
 
-	return( 1 );
+	return 1;
 }
 
 
@@ -162,61 +130,66 @@ static int __init scc_test( volatile char *ctla )
 
 int __init atari_parse_bootinfo(const struct bi_record *record)
 {
-    int unknown = 0;
-    const u_long *data = record->data;
+	int unknown = 0;
+	const void *data = record->data;
 
-    switch (record->tag) {
+	switch (be16_to_cpu(record->tag)) {
 	case BI_ATARI_MCH_COOKIE:
-	    atari_mch_cookie = *data;
-	    break;
+		atari_mch_cookie = be32_to_cpup(data);
+		break;
 	case BI_ATARI_MCH_TYPE:
-	    atari_mch_type = *data;
-	    break;
+		atari_mch_type = be32_to_cpup(data);
+		break;
 	default:
-	    unknown = 1;
-    }
-    return(unknown);
+		unknown = 1;
+		break;
+	}
+	return unknown;
 }
 
 
 /* Parse the Atari-specific switches= option. */
-void __init atari_switches_setup( const char *str, unsigned len )
+static int __init atari_switches_setup(char *str)
 {
-    char switches[len+1];
-    char *p;
-    int ovsc_shift;
-    char *args = switches;
-
-    /* copy string to local array, strsep works destructively... */
-    strlcpy( switches, str, sizeof(switches) );
-    atari_switches = 0;
-
-    /* parse the options */
-    while ((p = strsep(&args, ",")) != NULL) {
-	if (!*p) continue;
-	ovsc_shift = 0;
-	if (strncmp( p, "ov_", 3 ) == 0) {
-	    p += 3;
-	    ovsc_shift = ATARI_SWITCH_OVSC_SHIFT;
-	}
-
-	if (strcmp( p, "ikbd" ) == 0) {
-	    /* RTS line of IKBD ACIA */
-	    atari_switches |= ATARI_SWITCH_IKBD << ovsc_shift;
-	}
-	else if (strcmp( p, "midi" ) == 0) {
-	    /* RTS line of MIDI ACIA */
-	    atari_switches |= ATARI_SWITCH_MIDI << ovsc_shift;
-	}
-	else if (strcmp( p, "snd6" ) == 0) {
-	    atari_switches |= ATARI_SWITCH_SND6 << ovsc_shift;
+	char switches[strlen(str) + 1];
+	char *p;
+	int ovsc_shift;
+	char *args = switches;
+
+	if (!MACH_IS_ATARI)
+		return 0;
+
+	/* copy string to local array, strsep works destructively... */
+	strcpy(switches, str);
+	atari_switches = 0;
+
+	/* parse the options */
+	while ((p = strsep(&args, ",")) != NULL) {
+		if (!*p)
+			continue;
+		ovsc_shift = 0;
+		if (strncmp(p, "ov_", 3) == 0) {
+			p += 3;
+			ovsc_shift = ATARI_SWITCH_OVSC_SHIFT;
+		}
+
+		if (strcmp(p, "ikbd") == 0) {
+			/* RTS line of IKBD ACIA */
+			atari_switches |= ATARI_SWITCH_IKBD << ovsc_shift;
+		} else if (strcmp(p, "midi") == 0) {
+			/* RTS line of MIDI ACIA */
+			atari_switches |= ATARI_SWITCH_MIDI << ovsc_shift;
+		} else if (strcmp(p, "snd6") == 0) {
+			atari_switches |= ATARI_SWITCH_SND6 << ovsc_shift;
+		} else if (strcmp(p, "snd7") == 0) {
+			atari_switches |= ATARI_SWITCH_SND7 << ovsc_shift;
+		}
 	}
-	else if (strcmp( p, "snd7" ) == 0) {
-	    atari_switches |= ATARI_SWITCH_SND7 << ovsc_shift;
-	}
-    }
+	return 0;
 }
 
+early_param("switches", atari_switches_setup);
+
 
     /*
      *  Setup the Atari configuration info
@@ -224,295 +197,271 @@ void __init atari_switches_setup( const char *str, unsigned len )
 
 void __init config_atari(void)
 {
-    unsigned short tos_version;
-
-    memset(&atari_hw_present, 0, sizeof(atari_hw_present));
-
-    atari_debug_init();
-
-    ioport_resource.end  = 0xFFFFFFFF;  /* Change size of I/O space from 64KB
-                                           to 4GB. */
-
-    mach_sched_init      = atari_sched_init;
-    mach_init_IRQ        = atari_init_IRQ;
-    mach_request_irq     = atari_request_irq;
-    mach_free_irq        = atari_free_irq;
-    enable_irq           = atari_enable_irq;
-    disable_irq          = atari_disable_irq;
-    mach_get_model	 = atari_get_model;
-    mach_get_hardware_list = atari_get_hardware_list;
-    mach_get_irq_list	 = show_atari_interrupts;
-    mach_gettimeoffset   = atari_gettimeoffset;
-    mach_reset           = atari_reset;
-#ifdef CONFIG_ATARI_FLOPPY
-    mach_floppy_setup	 = atari_floppy_setup;
-#endif
-#ifdef CONFIG_DUMMY_CONSOLE
-    conswitchp	         = &dummy_con;
-#endif
-    mach_max_dma_address = 0xffffff;
+	unsigned short tos_version;
+
+	memset(&atari_hw_present, 0, sizeof(atari_hw_present));
+
+	/* Change size of I/O space from 64KB to 4GB. */
+	ioport_resource.end  = 0xFFFFFFFF;
+
+	mach_sched_init      = atari_sched_init;
+	mach_init_IRQ        = atari_init_IRQ;
+	mach_get_model	 = atari_get_model;
+	mach_get_hardware_list = atari_get_hardware_list;
+	arch_gettimeoffset   = atari_gettimeoffset;
+	mach_reset           = atari_reset;
+	mach_max_dma_address = 0xffffff;
 #if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
-    mach_beep          = atari_mksound;
+	mach_beep          = atari_mksound;
 #endif
 #ifdef CONFIG_HEARTBEAT
-    mach_heartbeat = atari_heartbeat;
+	mach_heartbeat = atari_heartbeat;
 #endif
 
-    /* Set switches as requested by the user */
-    if (atari_switches & ATARI_SWITCH_IKBD)
-	acia.key_ctrl = ACIA_DIV64 | ACIA_D8N1S | ACIA_RHTID;
-    if (atari_switches & ATARI_SWITCH_MIDI)
-	acia.mid_ctrl = ACIA_DIV16 | ACIA_D8N1S | ACIA_RHTID;
-    if (atari_switches & (ATARI_SWITCH_SND6|ATARI_SWITCH_SND7)) {
-	sound_ym.rd_data_reg_sel = 14;
-	sound_ym.wd_data = sound_ym.rd_data_reg_sel |
-			   ((atari_switches&ATARI_SWITCH_SND6) ? 0x40 : 0) |
-			   ((atari_switches&ATARI_SWITCH_SND7) ? 0x80 : 0);
-    }
-
-    /* ++bjoern:
-     * Determine hardware present
-     */
+	/* Set switches as requested by the user */
+	if (atari_switches & ATARI_SWITCH_IKBD)
+		acia.key_ctrl = ACIA_DIV64 | ACIA_D8N1S | ACIA_RHTID;
+	if (atari_switches & ATARI_SWITCH_MIDI)
+		acia.mid_ctrl = ACIA_DIV16 | ACIA_D8N1S | ACIA_RHTID;
+	if (atari_switches & (ATARI_SWITCH_SND6|ATARI_SWITCH_SND7)) {
+		sound_ym.rd_data_reg_sel = 14;
+		sound_ym.wd_data = sound_ym.rd_data_reg_sel |
+				   ((atari_switches&ATARI_SWITCH_SND6) ? 0x40 : 0) |
+				   ((atari_switches&ATARI_SWITCH_SND7) ? 0x80 : 0);
+	}
 
-    printk( "Atari hardware found: " );
-    if (MACH_IS_MEDUSA || MACH_IS_HADES) {
-        /* There's no Atari video hardware on the Medusa, but all the
-         * addresses below generate a DTACK so no bus error occurs! */
-    }
-    else if (hwreg_present( f030_xreg )) {
-	ATARIHW_SET(VIDEL_SHIFTER);
-        printk( "VIDEL " );
-        /* This is a temporary hack: If there is Falcon video
-         * hardware, we assume that the ST-DMA serves SCSI instead of
-         * ACSI. In the future, there should be a better method for
-         * this...
-         */
-	ATARIHW_SET(ST_SCSI);
-        printk( "STDMA-SCSI " );
-    }
-    else if (hwreg_present( tt_palette )) {
-	ATARIHW_SET(TT_SHIFTER);
-        printk( "TT_SHIFTER " );
-    }
-    else if (hwreg_present( &shifter.bas_hi )) {
-        if (hwreg_present( &shifter.bas_lo ) &&
-	    (shifter.bas_lo = 0x0aau, shifter.bas_lo == 0x0aau)) {
-	    ATARIHW_SET(EXTD_SHIFTER);
-            printk( "EXTD_SHIFTER " );
-        }
-        else {
-	    ATARIHW_SET(STND_SHIFTER);
-            printk( "STND_SHIFTER " );
-        }
-    }
-    if (hwreg_present( &mfp.par_dt_reg )) {
-	ATARIHW_SET(ST_MFP);
-        printk( "ST_MFP " );
-    }
-    if (hwreg_present( &tt_mfp.par_dt_reg )) {
-	ATARIHW_SET(TT_MFP);
-        printk( "TT_MFP " );
-    }
-    if (hwreg_present( &tt_scsi_dma.dma_addr_hi )) {
-	ATARIHW_SET(SCSI_DMA);
-        printk( "TT_SCSI_DMA " );
-    }
-    if (!MACH_IS_HADES && hwreg_present( &st_dma.dma_hi )) {
-	ATARIHW_SET(STND_DMA);
-        printk( "STND_DMA " );
-    }
-    if (MACH_IS_MEDUSA || /* The ST-DMA address registers aren't readable
-			   * on all Medusas, so the test below may fail */
-        (hwreg_present( &st_dma.dma_vhi ) &&
-         (st_dma.dma_vhi = 0x55) && (st_dma.dma_hi = 0xaa) &&
-         st_dma.dma_vhi == 0x55 && st_dma.dma_hi == 0xaa &&
-         (st_dma.dma_vhi = 0xaa) && (st_dma.dma_hi = 0x55) &&
-         st_dma.dma_vhi == 0xaa && st_dma.dma_hi == 0x55)) {
-	ATARIHW_SET(EXTD_DMA);
-        printk( "EXTD_DMA " );
-    }
-    if (hwreg_present( &tt_scsi.scsi_data )) {
-	ATARIHW_SET(TT_SCSI);
-        printk( "TT_SCSI " );
-    }
-    if (hwreg_present( &sound_ym.rd_data_reg_sel )) {
-	ATARIHW_SET(YM_2149);
-        printk( "YM2149 " );
-    }
-    if (!MACH_IS_MEDUSA && !MACH_IS_HADES &&
-	hwreg_present( &tt_dmasnd.ctrl )) {
-	ATARIHW_SET(PCM_8BIT);
-        printk( "PCM " );
-    }
-    if (!MACH_IS_HADES && hwreg_present( &falcon_codec.unused5 )) {
-	ATARIHW_SET(CODEC);
-        printk( "CODEC " );
-    }
-    if (hwreg_present( &dsp56k_host_interface.icr )) {
-	ATARIHW_SET(DSP56K);
-        printk( "DSP56K " );
-    }
-    if (hwreg_present( &tt_scc_dma.dma_ctrl ) &&
+	/* ++bjoern:
+	 * Determine hardware present
+	 */
+
+	printk("Atari hardware found: ");
+	if (MACH_IS_MEDUSA) {
+		/* There's no Atari video hardware on the Medusa, but all the
+		 * addresses below generate a DTACK so no bus error occurs! */
+	} else if (hwreg_present(f030_xreg)) {
+		ATARIHW_SET(VIDEL_SHIFTER);
+		printk("VIDEL ");
+		/* This is a temporary hack: If there is Falcon video
+		 * hardware, we assume that the ST-DMA serves SCSI instead of
+		 * ACSI. In the future, there should be a better method for
+		 * this...
+		 */
+		ATARIHW_SET(ST_SCSI);
+		printk("STDMA-SCSI ");
+	} else if (hwreg_present(tt_palette)) {
+		ATARIHW_SET(TT_SHIFTER);
+		printk("TT_SHIFTER ");
+	} else if (hwreg_present(&shifter.bas_hi)) {
+		if (hwreg_present(&shifter.bas_lo) &&
+		    (shifter.bas_lo = 0x0aau, shifter.bas_lo == 0x0aau)) {
+			ATARIHW_SET(EXTD_SHIFTER);
+			printk("EXTD_SHIFTER ");
+		} else {
+			ATARIHW_SET(STND_SHIFTER);
+			printk("STND_SHIFTER ");
+		}
+	}
+	if (hwreg_present(&st_mfp.par_dt_reg)) {
+		ATARIHW_SET(ST_MFP);
+		printk("ST_MFP ");
+	}
+	if (hwreg_present(&tt_mfp.par_dt_reg)) {
+		ATARIHW_SET(TT_MFP);
+		printk("TT_MFP ");
+	}
+	if (hwreg_present(&tt_scsi_dma.dma_addr_hi)) {
+		ATARIHW_SET(SCSI_DMA);
+		printk("TT_SCSI_DMA ");
+	}
+	/*
+	 * The ST-DMA address registers aren't readable
+	 * on all Medusas, so the test below may fail
+	 */
+	if (MACH_IS_MEDUSA ||
+	    (hwreg_present(&st_dma.dma_vhi) &&
+	     (st_dma.dma_vhi = 0x55) && (st_dma.dma_hi = 0xaa) &&
+	     st_dma.dma_vhi == 0x55 && st_dma.dma_hi == 0xaa &&
+	     (st_dma.dma_vhi = 0xaa) && (st_dma.dma_hi = 0x55) &&
+	     st_dma.dma_vhi == 0xaa && st_dma.dma_hi == 0x55)) {
+		ATARIHW_SET(EXTD_DMA);
+		printk("EXTD_DMA ");
+	}
+	if (hwreg_present(&tt_scsi.scsi_data)) {
+		ATARIHW_SET(TT_SCSI);
+		printk("TT_SCSI ");
+	}
+	if (hwreg_present(&sound_ym.rd_data_reg_sel)) {
+		ATARIHW_SET(YM_2149);
+		printk("YM2149 ");
+	}
+	if (!MACH_IS_MEDUSA && hwreg_present(&tt_dmasnd.ctrl)) {
+		ATARIHW_SET(PCM_8BIT);
+		printk("PCM ");
+	}
+	if (hwreg_present(&falcon_codec.unused5)) {
+		ATARIHW_SET(CODEC);
+		printk("CODEC ");
+	}
+	if (hwreg_present(&dsp56k_host_interface.icr)) {
+		ATARIHW_SET(DSP56K);
+		printk("DSP56K ");
+	}
+	if (hwreg_present(&tt_scc_dma.dma_ctrl) &&
 #if 0
-	/* This test sucks! Who knows some better? */
-	(tt_scc_dma.dma_ctrl = 0x01, (tt_scc_dma.dma_ctrl & 1) == 1) &&
-	(tt_scc_dma.dma_ctrl = 0x00, (tt_scc_dma.dma_ctrl & 1) == 0)
+	    /* This test sucks! Who knows some better? */
+	    (tt_scc_dma.dma_ctrl = 0x01, (tt_scc_dma.dma_ctrl & 1) == 1) &&
+	    (tt_scc_dma.dma_ctrl = 0x00, (tt_scc_dma.dma_ctrl & 1) == 0)
 #else
-	!MACH_IS_MEDUSA && !MACH_IS_HADES
+	    !MACH_IS_MEDUSA
 #endif
-	) {
-	ATARIHW_SET(SCC_DMA);
-        printk( "SCC_DMA " );
-    }
-    if (scc_test( &scc.cha_a_ctrl )) {
-	ATARIHW_SET(SCC);
-        printk( "SCC " );
-    }
-    if (scc_test( &st_escc.cha_b_ctrl )) {
-	ATARIHW_SET( ST_ESCC );
-	printk( "ST_ESCC " );
-    }
-    if (MACH_IS_HADES)
-    {
-        ATARIHW_SET( VME );
-        printk( "VME " );
-    }
-    else if (hwreg_present( &tt_scu.sys_mask )) {
-	ATARIHW_SET(SCU);
-	/* Assume a VME bus if there's a SCU */
-	ATARIHW_SET( VME );
-        printk( "VME SCU " );
-    }
-    if (hwreg_present( (void *)(0xffff9210) )) {
-	ATARIHW_SET(ANALOG_JOY);
-        printk( "ANALOG_JOY " );
-    }
-    if (!MACH_IS_HADES && hwreg_present( blitter.halftone )) {
-	ATARIHW_SET(BLITTER);
-        printk( "BLITTER " );
-    }
-    if (hwreg_present((void *)0xfff00039)) {
-	ATARIHW_SET(IDE);
-        printk( "IDE " );
-    }
+	    ) {
+		ATARIHW_SET(SCC_DMA);
+		printk("SCC_DMA ");
+	}
+	if (scc_test(&atari_scc.cha_a_ctrl)) {
+		ATARIHW_SET(SCC);
+		printk("SCC ");
+	}
+	if (scc_test(&st_escc.cha_b_ctrl)) {
+		ATARIHW_SET(ST_ESCC);
+		printk("ST_ESCC ");
+	}
+	if (hwreg_present(&tt_scu.sys_mask)) {
+		ATARIHW_SET(SCU);
+		/* Assume a VME bus if there's a SCU */
+		ATARIHW_SET(VME);
+		printk("VME SCU ");
+	}
+	if (hwreg_present((void *)(0xffff9210))) {
+		ATARIHW_SET(ANALOG_JOY);
+		printk("ANALOG_JOY ");
+	}
+	if (hwreg_present(blitter.halftone)) {
+		ATARIHW_SET(BLITTER);
+		printk("BLITTER ");
+	}
+	if (hwreg_present((void *)0xfff00039)) {
+		ATARIHW_SET(IDE);
+		printk("IDE ");
+	}
 #if 1 /* This maybe wrong */
-    if (!MACH_IS_MEDUSA && !MACH_IS_HADES &&
-	hwreg_present( &tt_microwire.data ) &&
-	hwreg_present( &tt_microwire.mask ) &&
-	(tt_microwire.mask = 0x7ff,
-	 udelay(1),
-	 tt_microwire.data = MW_LM1992_PSG_HIGH | MW_LM1992_ADDR,
-	 udelay(1),
-	 tt_microwire.data != 0)) {
-	ATARIHW_SET(MICROWIRE);
-	while (tt_microwire.mask != 0x7ff) ;
-        printk( "MICROWIRE " );
-    }
+	if (!MACH_IS_MEDUSA && hwreg_present(&tt_microwire.data) &&
+	    hwreg_present(&tt_microwire.mask) &&
+	    (tt_microwire.mask = 0x7ff,
+	     udelay(1),
+	     tt_microwire.data = MW_LM1992_PSG_HIGH | MW_LM1992_ADDR,
+	     udelay(1),
+	     tt_microwire.data != 0)) {
+		ATARIHW_SET(MICROWIRE);
+		while (tt_microwire.mask != 0x7ff)
+			;
+		printk("MICROWIRE ");
+	}
 #endif
-    if (hwreg_present( &tt_rtc.regsel )) {
-	ATARIHW_SET(TT_CLK);
-        printk( "TT_CLK " );
-        mach_hwclk = atari_tt_hwclk;
-        mach_set_clock_mmss = atari_tt_set_clock_mmss;
-    }
-    if (!MACH_IS_HADES && hwreg_present( &mste_rtc.sec_ones)) {
-	ATARIHW_SET(MSTE_CLK);
-        printk( "MSTE_CLK ");
-        mach_hwclk = atari_mste_hwclk;
-        mach_set_clock_mmss = atari_mste_set_clock_mmss;
-    }
-    if (!MACH_IS_MEDUSA && !MACH_IS_HADES &&
-	hwreg_present( &dma_wd.fdc_speed ) &&
-	hwreg_write( &dma_wd.fdc_speed, 0 )) {
-	    ATARIHW_SET(FDCSPEED);
-	    printk( "FDC_SPEED ");
-    }
-    if (!MACH_IS_HADES && !ATARIHW_PRESENT(ST_SCSI)) {
-	ATARIHW_SET(ACSI);
-        printk( "ACSI " );
-    }
-    printk("\n");
-
-    if (CPU_IS_040_OR_060)
-        /* Now it seems to be safe to turn of the tt0 transparent
-         * translation (the one that must not be turned off in
-         * head.S...)
-         */
-        __asm__ volatile ("moveq #0,%/d0\n\t"
-                          ".chip 68040\n\t"
-			  "movec %%d0,%%itt0\n\t"
-			  "movec %%d0,%%dtt0\n\t"
-			  ".chip 68k"
-						  : /* no outputs */
-						  : /* no inputs */
-						  : "d0");
-
-    /* allocator for memory that must reside in st-ram */
-    atari_stram_init ();
-
-    /* Set up a mapping for the VMEbus address region:
-     *
-     * VME is either at phys. 0xfexxxxxx (TT) or 0xa00000..0xdfffff
-     * (MegaSTE) In both cases, the whole 16 MB chunk is mapped at
-     * 0xfe000000 virt., because this can be done with a single
-     * transparent translation. On the 68040, lots of often unused
-     * page tables would be needed otherwise. On a MegaSTE or similar,
-     * the highest byte is stripped off by hardware due to the 24 bit
-     * design of the bus.
-     */
+	if (hwreg_present(&tt_rtc.regsel)) {
+		ATARIHW_SET(TT_CLK);
+		printk("TT_CLK ");
+		mach_hwclk = atari_tt_hwclk;
+		mach_set_clock_mmss = atari_tt_set_clock_mmss;
+	}
+	if (hwreg_present(&mste_rtc.sec_ones)) {
+		ATARIHW_SET(MSTE_CLK);
+		printk("MSTE_CLK ");
+		mach_hwclk = atari_mste_hwclk;
+		mach_set_clock_mmss = atari_mste_set_clock_mmss;
+	}
+	if (!MACH_IS_MEDUSA && hwreg_present(&dma_wd.fdc_speed) &&
+	    hwreg_write(&dma_wd.fdc_speed, 0)) {
+		ATARIHW_SET(FDCSPEED);
+		printk("FDC_SPEED ");
+	}
+	if (!ATARIHW_PRESENT(ST_SCSI)) {
+		ATARIHW_SET(ACSI);
+		printk("ACSI ");
+	}
+	printk("\n");
+
+	if (CPU_IS_040_OR_060)
+		/* Now it seems to be safe to turn of the tt0 transparent
+		 * translation (the one that must not be turned off in
+		 * head.S...)
+		 */
+		asm volatile ("\n"
+			"	moveq	#0,%%d0\n"
+			"	.chip	68040\n"
+			"	movec	%%d0,%%itt0\n"
+			"	movec	%%d0,%%dtt0\n"
+			"	.chip	68k"
+			: /* no outputs */
+			: /* no inputs */
+			: "d0");
+
+	/* allocator for memory that must reside in st-ram */
+	atari_stram_init();
+
+	/* Set up a mapping for the VMEbus address region:
+	 *
+	 * VME is either at phys. 0xfexxxxxx (TT) or 0xa00000..0xdfffff
+	 * (MegaSTE) In both cases, the whole 16 MB chunk is mapped at
+	 * 0xfe000000 virt., because this can be done with a single
+	 * transparent translation. On the 68040, lots of often unused
+	 * page tables would be needed otherwise. On a MegaSTE or similar,
+	 * the highest byte is stripped off by hardware due to the 24 bit
+	 * design of the bus.
+	 */
+
+	if (CPU_IS_020_OR_030) {
+		unsigned long tt1_val;
+		tt1_val = 0xfe008543;	/* Translate 0xfexxxxxx, enable, cache
+					 * inhibit, read and write, FDC mask = 3,
+					 * FDC val = 4 -> Supervisor only */
+		asm volatile ("\n"
+			"	.chip	68030\n"
+			"	pmove	%0,%/tt1\n"
+			"	.chip	68k"
+			: : "m" (tt1_val));
+	} else {
+	        asm volatile ("\n"
+			"	.chip	68040\n"
+			"	movec	%0,%%itt1\n"
+			"	movec	%0,%%dtt1\n"
+			"	.chip	68k"
+			:
+			: "d" (0xfe00a040));	/* Translate 0xfexxxxxx, enable,
+						 * supervisor only, non-cacheable/
+						 * serialized, writable */
 
-    if (CPU_IS_020_OR_030) {
-        unsigned long	tt1_val;
-        tt1_val = 0xfe008543;	/* Translate 0xfexxxxxx, enable, cache
-                                 * inhibit, read and write, FDC mask = 3,
-                                 * FDC val = 4 -> Supervisor only */
-        __asm__ __volatile__ ( ".chip 68030\n\t"
-				"pmove	%0@,%/tt1\n\t"
-				".chip 68k"
-				: : "a" (&tt1_val) );
-    }
-    else {
-        __asm__ __volatile__
-            ( "movel %0,%/d0\n\t"
-	      ".chip 68040\n\t"
-	      "movec %%d0,%%itt1\n\t"
-	      "movec %%d0,%%dtt1\n\t"
-	      ".chip 68k"
-              :
-              : "g" (0xfe00a040)	/* Translate 0xfexxxxxx, enable,
-                                         * supervisor only, non-cacheable/
-                                         * serialized, writable */
-              : "d0" );
-
-    }
-
-    /* Fetch tos version at Physical 2 */
-    /* We my not be able to access this address if the kernel is
-       loaded to st ram, since the first page is unmapped.  On the
-       Medusa this is always the case and there is nothing we can do
-       about this, so we just assume the smaller offset.  For the TT
-       we use the fact that in head.S we have set up a mapping
-       0xFFxxxxxx -> 0x00xxxxxx, so that the first 16MB is accessible
-       in the last 16MB of the address space. */
-    tos_version = (MACH_IS_MEDUSA || MACH_IS_HADES) ?
-		  0xfff : *(unsigned short *)0xff000002;
-    atari_rtc_year_offset = (tos_version < 0x306) ? 70 : 68;
+	}
+
+	/* Fetch tos version at Physical 2 */
+	/*
+	 * We my not be able to access this address if the kernel is
+	 * loaded to st ram, since the first page is unmapped.  On the
+	 * Medusa this is always the case and there is nothing we can do
+	 * about this, so we just assume the smaller offset.  For the TT
+	 * we use the fact that in head.S we have set up a mapping
+	 * 0xFFxxxxxx -> 0x00xxxxxx, so that the first 16MB is accessible
+	 * in the last 16MB of the address space.
+	 */
+	tos_version = (MACH_IS_MEDUSA) ?
+			0xfff : *(unsigned short *)0xff000002;
+	atari_rtc_year_offset = (tos_version < 0x306) ? 70 : 68;
 }
 
 #ifdef CONFIG_HEARTBEAT
-static void atari_heartbeat( int on )
+static void atari_heartbeat(int on)
 {
-    unsigned char tmp;
-    unsigned long flags;
+	unsigned char tmp;
+	unsigned long flags;
 
-    if (atari_dont_touch_floppy_select)
-	return;
+	if (atari_dont_touch_floppy_select)
+		return;
 
-    local_irq_save(flags);
-    sound_ym.rd_data_reg_sel = 14; /* Select PSG Port A */
-    tmp = sound_ym.rd_data_reg_sel;
-    sound_ym.wd_data = on ? (tmp & ~0x02) : (tmp | 0x02);
-    local_irq_restore(flags);
+	local_irq_save(flags);
+	sound_ym.rd_data_reg_sel = 14;	/* Select PSG Port A */
+	tmp = sound_ym.rd_data_reg_sel;
+	sound_ym.wd_data = on ? (tmp & ~0x02) : (tmp | 0x02);
+	local_irq_restore(flags);
 }
 #endif
 
@@ -547,180 +496,403 @@ static void atari_heartbeat( int on )
 
 /* ++andreas: no need for complicated code, just depend on prefetch */
 
-static void atari_reset (void)
+static void atari_reset(void)
 {
-    long tc_val = 0;
-    long reset_addr;
-
-    /* On the Medusa, phys. 0x4 may contain garbage because it's no
-       ROM.  See above for explanation why we cannot use PTOV(4). */
-    reset_addr = MACH_IS_HADES ? 0x7fe00030 :
-                 MACH_IS_MEDUSA || MACH_IS_AB40 ? 0xe00030 :
-		 *(unsigned long *) 0xff000004;
-
-    /* reset ACIA for switch off OverScan, if it's active */
-    if (atari_switches & ATARI_SWITCH_OVSC_IKBD)
-	acia.key_ctrl = ACIA_RESET;
-    if (atari_switches & ATARI_SWITCH_OVSC_MIDI)
-	acia.mid_ctrl = ACIA_RESET;
-
-    /* processor independent: turn off interrupts and reset the VBR;
-     * the caches must be left enabled, else prefetching the final jump
-     * instruction doesn't work. */
-    local_irq_disable();
-    __asm__ __volatile__
-	("moveq	#0,%/d0\n\t"
-	 "movec	%/d0,%/vbr"
-	 : : : "d0" );
-
-    if (CPU_IS_040_OR_060) {
-        unsigned long jmp_addr040 = virt_to_phys(&&jmp_addr_label040);
-	if (CPU_IS_060) {
-	    /* 68060: clear PCR to turn off superscalar operation */
-	    __asm__ __volatile__
-		("moveq	#0,%/d0\n\t"
-		 ".chip 68060\n\t"
-		 "movec %%d0,%%pcr\n\t"
-		 ".chip 68k"
-		 : : : "d0" );
-	}
-
-        __asm__ __volatile__
-            ("movel    %0,%/d0\n\t"
-             "andl     #0xff000000,%/d0\n\t"
-             "orw      #0xe020,%/d0\n\t"   /* map 16 MB, enable, cacheable */
-             ".chip 68040\n\t"
-	     "movec    %%d0,%%itt0\n\t"
-             "movec    %%d0,%%dtt0\n\t"
-	     ".chip 68k\n\t"
-             "jmp   %0@\n\t"
-             : /* no outputs */
-             : "a" (jmp_addr040)
-             : "d0" );
-      jmp_addr_label040:
-        __asm__ __volatile__
-          ("moveq #0,%/d0\n\t"
-	   "nop\n\t"
-	   ".chip 68040\n\t"
-	   "cinva %%bc\n\t"
-	   "nop\n\t"
-	   "pflusha\n\t"
-	   "nop\n\t"
-	   "movec %%d0,%%tc\n\t"
-	   "nop\n\t"
-	   /* the following setup of transparent translations is needed on the
-	    * Afterburner040 to successfully reboot. Other machines shouldn't
-	    * care about a different tt regs setup, they also didn't care in
-	    * the past that the regs weren't turned off. */
-	   "movel #0xffc000,%%d0\n\t" /* whole insn space cacheable */
-	   "movec %%d0,%%itt0\n\t"
-	   "movec %%d0,%%itt1\n\t"
-	   "orw   #0x40,%/d0\n\t" /* whole data space non-cacheable/ser. */
-	   "movec %%d0,%%dtt0\n\t"
-	   "movec %%d0,%%dtt1\n\t"
-	   ".chip 68k\n\t"
-           "jmp %0@"
-           : /* no outputs */
-           : "a" (reset_addr)
-           : "d0");
-    }
-    else
-        __asm__ __volatile__
-            ("pmove %0@,%/tc\n\t"
-             "jmp %1@"
-             : /* no outputs */
-             : "a" (&tc_val), "a" (reset_addr));
+	long tc_val = 0;
+	long reset_addr;
+
+	/*
+	 * On the Medusa, phys. 0x4 may contain garbage because it's no
+	 * ROM.  See above for explanation why we cannot use PTOV(4).
+	 */
+	reset_addr = MACH_IS_MEDUSA || MACH_IS_AB40 ? 0xe00030 :
+		     *(unsigned long *) 0xff000004;
+
+	/* reset ACIA for switch off OverScan, if it's active */
+	if (atari_switches & ATARI_SWITCH_OVSC_IKBD)
+		acia.key_ctrl = ACIA_RESET;
+	if (atari_switches & ATARI_SWITCH_OVSC_MIDI)
+		acia.mid_ctrl = ACIA_RESET;
+
+	/* processor independent: turn off interrupts and reset the VBR;
+	 * the caches must be left enabled, else prefetching the final jump
+	 * instruction doesn't work.
+	 */
+	local_irq_disable();
+	asm volatile ("movec	%0,%%vbr"
+			: : "d" (0));
+
+	if (CPU_IS_040_OR_060) {
+		unsigned long jmp_addr040 = virt_to_phys(&&jmp_addr_label040);
+		if (CPU_IS_060) {
+			/* 68060: clear PCR to turn off superscalar operation */
+			asm volatile ("\n"
+				"	.chip 68060\n"
+				"	movec %0,%%pcr\n"
+				"	.chip 68k"
+				: : "d" (0));
+		}
+
+		asm volatile ("\n"
+			"	move.l	%0,%%d0\n"
+			"	and.l	#0xff000000,%%d0\n"
+			"	or.w	#0xe020,%%d0\n"   /* map 16 MB, enable, cacheable */
+			"	.chip	68040\n"
+			"	movec	%%d0,%%itt0\n"
+			"	movec	%%d0,%%dtt0\n"
+			"	.chip	68k\n"
+			"	jmp	%0@"
+			: : "a" (jmp_addr040)
+			: "d0");
+	jmp_addr_label040:
+		asm volatile ("\n"
+			"	moveq	#0,%%d0\n"
+			"	nop\n"
+			"	.chip	68040\n"
+			"	cinva	%%bc\n"
+			"	nop\n"
+			"	pflusha\n"
+			"	nop\n"
+			"	movec	%%d0,%%tc\n"
+			"	nop\n"
+			/* the following setup of transparent translations is needed on the
+			 * Afterburner040 to successfully reboot. Other machines shouldn't
+			 * care about a different tt regs setup, they also didn't care in
+			 * the past that the regs weren't turned off. */
+			"	move.l	#0xffc000,%%d0\n" /* whole insn space cacheable */
+			"	movec	%%d0,%%itt0\n"
+			"	movec	%%d0,%%itt1\n"
+			"	or.w	#0x40,%/d0\n" /* whole data space non-cacheable/ser. */
+			"	movec	%%d0,%%dtt0\n"
+			"	movec	%%d0,%%dtt1\n"
+			"	.chip	68k\n"
+			"	jmp	%0@"
+			: /* no outputs */
+			: "a" (reset_addr)
+			: "d0");
+	} else
+		asm volatile ("\n"
+			"	pmove	%0,%%tc\n"
+			"	jmp	%1@"
+			: /* no outputs */
+			: "m" (tc_val), "a" (reset_addr));
 }
 
 
 static void atari_get_model(char *model)
 {
-    strcpy(model, "Atari ");
-    switch (atari_mch_cookie >> 16) {
+	strcpy(model, "Atari ");
+	switch (atari_mch_cookie >> 16) {
 	case ATARI_MCH_ST:
-	    if (ATARIHW_PRESENT(MSTE_CLK))
-		strcat (model, "Mega ST");
-	    else
-		strcat (model, "ST");
-	    break;
+		if (ATARIHW_PRESENT(MSTE_CLK))
+			strcat(model, "Mega ST");
+		else
+			strcat(model, "ST");
+		break;
 	case ATARI_MCH_STE:
-	    if (MACH_IS_MSTE)
-		strcat (model, "Mega STE");
-	    else
-		strcat (model, "STE");
-	    break;
+		if (MACH_IS_MSTE)
+			strcat(model, "Mega STE");
+		else
+			strcat(model, "STE");
+		break;
 	case ATARI_MCH_TT:
-	    if (MACH_IS_MEDUSA)
-		/* Medusa has TT _MCH cookie */
-		strcat (model, "Medusa");
-	    else if (MACH_IS_HADES)
-		strcat(model, "Hades");
-	    else
-		strcat (model, "TT");
-	    break;
+		if (MACH_IS_MEDUSA)
+			/* Medusa has TT _MCH cookie */
+			strcat(model, "Medusa");
+		else
+			strcat(model, "TT");
+		break;
 	case ATARI_MCH_FALCON:
-	    strcat (model, "Falcon");
-	    if (MACH_IS_AB40)
-		strcat (model, " (with Afterburner040)");
-	    break;
+		strcat(model, "Falcon");
+		if (MACH_IS_AB40)
+			strcat(model, " (with Afterburner040)");
+		break;
 	default:
-	    sprintf (model + strlen (model), "(unknown mach cookie 0x%lx)",
-		     atari_mch_cookie);
-	    break;
-    }
+		sprintf(model + strlen(model), "(unknown mach cookie 0x%lx)",
+			atari_mch_cookie);
+		break;
+	}
 }
 
 
-static int atari_get_hardware_list(char *buffer)
+static void atari_get_hardware_list(struct seq_file *m)
 {
-    int len = 0, i;
-
-    for (i = 0; i < m68k_num_memory; i++)
-	len += sprintf (buffer+len, "\t%3ld MB at 0x%08lx (%s)\n",
-			m68k_memory[i].size >> 20, m68k_memory[i].addr,
-			(m68k_memory[i].addr & 0xff000000 ?
-			 "alternate RAM" : "ST-RAM"));
-
-#define ATARIHW_ANNOUNCE(name,str)				\
-    if (ATARIHW_PRESENT(name))			\
-	len += sprintf (buffer + len, "\t%s\n", str)
-
-    len += sprintf (buffer + len, "Detected hardware:\n");
-    ATARIHW_ANNOUNCE(STND_SHIFTER, "ST Shifter");
-    ATARIHW_ANNOUNCE(EXTD_SHIFTER, "STe Shifter");
-    ATARIHW_ANNOUNCE(TT_SHIFTER, "TT Shifter");
-    ATARIHW_ANNOUNCE(VIDEL_SHIFTER, "Falcon Shifter");
-    ATARIHW_ANNOUNCE(YM_2149, "Programmable Sound Generator");
-    ATARIHW_ANNOUNCE(PCM_8BIT, "PCM 8 Bit Sound");
-    ATARIHW_ANNOUNCE(CODEC, "CODEC Sound");
-    ATARIHW_ANNOUNCE(TT_SCSI, "SCSI Controller NCR5380 (TT style)");
-    ATARIHW_ANNOUNCE(ST_SCSI, "SCSI Controller NCR5380 (Falcon style)");
-    ATARIHW_ANNOUNCE(ACSI, "ACSI Interface");
-    ATARIHW_ANNOUNCE(IDE, "IDE Interface");
-    ATARIHW_ANNOUNCE(FDCSPEED, "8/16 Mhz Switch for FDC");
-    ATARIHW_ANNOUNCE(ST_MFP, "Multi Function Peripheral MFP 68901");
-    ATARIHW_ANNOUNCE(TT_MFP, "Second Multi Function Peripheral MFP 68901");
-    ATARIHW_ANNOUNCE(SCC, "Serial Communications Controller SCC 8530");
-    ATARIHW_ANNOUNCE(ST_ESCC, "Extended Serial Communications Controller SCC 85230");
-    ATARIHW_ANNOUNCE(ANALOG_JOY, "Paddle Interface");
-    ATARIHW_ANNOUNCE(MICROWIRE, "MICROWIRE(tm) Interface");
-    ATARIHW_ANNOUNCE(STND_DMA, "DMA Controller (24 bit)");
-    ATARIHW_ANNOUNCE(EXTD_DMA, "DMA Controller (32 bit)");
-    ATARIHW_ANNOUNCE(SCSI_DMA, "DMA Controller for NCR5380");
-    ATARIHW_ANNOUNCE(SCC_DMA, "DMA Controller for SCC");
-    ATARIHW_ANNOUNCE(TT_CLK, "Clock Chip MC146818A");
-    ATARIHW_ANNOUNCE(MSTE_CLK, "Clock Chip RP5C15");
-    ATARIHW_ANNOUNCE(SCU, "System Control Unit");
-    ATARIHW_ANNOUNCE(BLITTER, "Blitter");
-    ATARIHW_ANNOUNCE(VME, "VME Bus");
-    ATARIHW_ANNOUNCE(DSP56K, "DSP56001 processor");
-
-    return(len);
+	int i;
+
+	for (i = 0; i < m68k_num_memory; i++)
+		seq_printf(m, "\t%3ld MB at 0x%08lx (%s)\n",
+				m68k_memory[i].size >> 20, m68k_memory[i].addr,
+				(m68k_memory[i].addr & 0xff000000 ?
+				 "alternate RAM" : "ST-RAM"));
+
+#define ATARIHW_ANNOUNCE(name, str)			\
+	if (ATARIHW_PRESENT(name))			\
+		seq_printf(m, "\t%s\n", str)
+
+	seq_printf(m, "Detected hardware:\n");
+	ATARIHW_ANNOUNCE(STND_SHIFTER, "ST Shifter");
+	ATARIHW_ANNOUNCE(EXTD_SHIFTER, "STe Shifter");
+	ATARIHW_ANNOUNCE(TT_SHIFTER, "TT Shifter");
+	ATARIHW_ANNOUNCE(VIDEL_SHIFTER, "Falcon Shifter");
+	ATARIHW_ANNOUNCE(YM_2149, "Programmable Sound Generator");
+	ATARIHW_ANNOUNCE(PCM_8BIT, "PCM 8 Bit Sound");
+	ATARIHW_ANNOUNCE(CODEC, "CODEC Sound");
+	ATARIHW_ANNOUNCE(TT_SCSI, "SCSI Controller NCR5380 (TT style)");
+	ATARIHW_ANNOUNCE(ST_SCSI, "SCSI Controller NCR5380 (Falcon style)");
+	ATARIHW_ANNOUNCE(ACSI, "ACSI Interface");
+	ATARIHW_ANNOUNCE(IDE, "IDE Interface");
+	ATARIHW_ANNOUNCE(FDCSPEED, "8/16 Mhz Switch for FDC");
+	ATARIHW_ANNOUNCE(ST_MFP, "Multi Function Peripheral MFP 68901");
+	ATARIHW_ANNOUNCE(TT_MFP, "Second Multi Function Peripheral MFP 68901");
+	ATARIHW_ANNOUNCE(SCC, "Serial Communications Controller SCC 8530");
+	ATARIHW_ANNOUNCE(ST_ESCC, "Extended Serial Communications Controller SCC 85230");
+	ATARIHW_ANNOUNCE(ANALOG_JOY, "Paddle Interface");
+	ATARIHW_ANNOUNCE(MICROWIRE, "MICROWIRE(tm) Interface");
+	ATARIHW_ANNOUNCE(STND_DMA, "DMA Controller (24 bit)");
+	ATARIHW_ANNOUNCE(EXTD_DMA, "DMA Controller (32 bit)");
+	ATARIHW_ANNOUNCE(SCSI_DMA, "DMA Controller for NCR5380");
+	ATARIHW_ANNOUNCE(SCC_DMA, "DMA Controller for SCC");
+	ATARIHW_ANNOUNCE(TT_CLK, "Clock Chip MC146818A");
+	ATARIHW_ANNOUNCE(MSTE_CLK, "Clock Chip RP5C15");
+	ATARIHW_ANNOUNCE(SCU, "System Control Unit");
+	ATARIHW_ANNOUNCE(BLITTER, "Blitter");
+	ATARIHW_ANNOUNCE(VME, "VME Bus");
+	ATARIHW_ANNOUNCE(DSP56K, "DSP56001 processor");
 }
 
 /*
- * Local variables:
- *  c-indent-level: 4
- *  tab-width: 8
- * End:
+ * MSch: initial platform device support for Atari,
+ * required for EtherNAT/EtherNEC/NetUSBee drivers
  */
+
+#if defined(CONFIG_ATARI_ETHERNAT) || defined(CONFIG_ATARI_ETHERNEC)
+static void isp1160_delay(struct device *dev, int delay)
+{
+	ndelay(delay);
+}
+#endif
+
+#ifdef CONFIG_ATARI_ETHERNAT
+/*
+ * EtherNAT: SMC91C111 Ethernet chipset, handled by smc91x driver
+ */
+
+#define ATARI_ETHERNAT_IRQ		140
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.name	= "smc91x-regs",
+		.start	= ATARI_ETHERNAT_PHYS_ADDR,
+		.end	= ATARI_ETHERNAT_PHYS_ADDR + 0xfffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "smc91x-irq",
+		.start	= ATARI_ETHERNAT_IRQ,
+		.end	= ATARI_ETHERNAT_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+/*
+ * ISP 1160 - using the isp116x-hcd module
+ */
+
+#define ATARI_USB_PHYS_ADDR	0x80000012
+#define ATARI_USB_IRQ		139
+
+static struct resource isp1160_resources[] = {
+	[0] = {
+		.name	= "isp1160-data",
+		.start	= ATARI_USB_PHYS_ADDR,
+		.end	= ATARI_USB_PHYS_ADDR + 0x1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "isp1160-regs",
+		.start	= ATARI_USB_PHYS_ADDR + 0x4,
+		.end	= ATARI_USB_PHYS_ADDR + 0x5,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.name	= "isp1160-irq",
+		.start	= ATARI_USB_IRQ,
+		.end	= ATARI_USB_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+/* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */
+static struct isp116x_platform_data isp1160_platform_data = {
+	/* Enable internal resistors on downstream ports */
+	.sel15Kres		= 1,
+	/* On-chip overcurrent protection */
+	.oc_enable		= 1,
+	/* INT output polarity */
+	.int_act_high		= 1,
+	/* INT edge or level triggered */
+	.int_edge_triggered	= 0,
+
+	/* WAKEUP pin connected - NOT SUPPORTED  */
+	/* .remote_wakeup_connected = 0, */
+	/* Wakeup by devices on usb bus enabled */
+	.remote_wakeup_enable	= 0,
+	.delay			= isp1160_delay,
+};
+
+static struct platform_device isp1160_device = {
+	.name		= "isp116x-hcd",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(isp1160_resources),
+	.resource	= isp1160_resources,
+	.dev			= {
+		.platform_data	= &isp1160_platform_data,
+	},
+};
+
+static struct platform_device *atari_ethernat_devices[] __initdata = {
+	&smc91x_device,
+	&isp1160_device
+};
+#endif /* CONFIG_ATARI_ETHERNAT */
+
+#ifdef CONFIG_ATARI_ETHERNEC
+/*
+ * EtherNEC: RTL8019 (NE2000 compatible) Ethernet chipset,
+ * handled by ne.c driver
+ */
+
+#define ATARI_ETHERNEC_PHYS_ADDR	0xfffa0000
+#define ATARI_ETHERNEC_BASE		0x300
+#define ATARI_ETHERNEC_IRQ		IRQ_MFP_TIMER1
+
+static struct resource rtl8019_resources[] = {
+	[0] = {
+		.name	= "rtl8019-regs",
+		.start	= ATARI_ETHERNEC_BASE,
+		.end	= ATARI_ETHERNEC_BASE + 0x20 - 1,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		.name	= "rtl8019-irq",
+		.start	= ATARI_ETHERNEC_IRQ,
+		.end	= ATARI_ETHERNEC_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device rtl8019_device = {
+	.name		= "ne",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rtl8019_resources),
+	.resource	= rtl8019_resources,
+};
+
+/*
+ * NetUSBee: ISP1160 USB host adapter via ROM-port adapter
+ */
+
+#define ATARI_NETUSBEE_PHYS_ADDR	0xfffa8000
+#define ATARI_NETUSBEE_BASE		0x340
+#define ATARI_NETUSBEE_IRQ		IRQ_MFP_TIMER2
+
+static struct resource netusbee_resources[] = {
+	[0] = {
+		.name	= "isp1160-data",
+		.start	= ATARI_NETUSBEE_BASE,
+		.end	= ATARI_NETUSBEE_BASE + 0x1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "isp1160-regs",
+		.start	= ATARI_NETUSBEE_BASE + 0x20,
+		.end	= ATARI_NETUSBEE_BASE + 0x21,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.name	= "isp1160-irq",
+		.start	= ATARI_NETUSBEE_IRQ,
+		.end	= ATARI_NETUSBEE_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+/* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */
+static struct isp116x_platform_data netusbee_platform_data = {
+	/* Enable internal resistors on downstream ports */
+	.sel15Kres		= 1,
+	/* On-chip overcurrent protection */
+	.oc_enable		= 1,
+	/* INT output polarity */
+	.int_act_high		= 1,
+	/* INT edge or level triggered */
+	.int_edge_triggered	= 0,
+
+	/* WAKEUP pin connected - NOT SUPPORTED  */
+	/* .remote_wakeup_connected = 0, */
+	/* Wakeup by devices on usb bus enabled */
+	.remote_wakeup_enable	= 0,
+	.delay			= isp1160_delay,
+};
+
+static struct platform_device netusbee_device = {
+	.name		= "isp116x-hcd",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(netusbee_resources),
+	.resource	= netusbee_resources,
+	.dev			= {
+		.platform_data	= &netusbee_platform_data,
+	},
+};
+
+static struct platform_device *atari_netusbee_devices[] __initdata = {
+	&rtl8019_device,
+	&netusbee_device
+};
+#endif /* CONFIG_ATARI_ETHERNEC */
+
+int __init atari_platform_init(void)
+{
+	int rv = 0;
+
+	if (!MACH_IS_ATARI)
+		return -ENODEV;
+
+#ifdef CONFIG_ATARI_ETHERNAT
+	{
+		unsigned char *enatc_virt;
+		enatc_virt = (unsigned char *)ioremap((ATARI_ETHERNAT_PHYS_ADDR+0x23), 0xf);
+		if (hwreg_present(enatc_virt)) {
+			rv = platform_add_devices(atari_ethernat_devices,
+						ARRAY_SIZE(atari_ethernat_devices));
+		}
+		iounmap(enatc_virt);
+	}
+#endif
+
+#ifdef CONFIG_ATARI_ETHERNEC
+	{
+		int error;
+		unsigned char *enec_virt;
+		enec_virt = (unsigned char *)ioremap((ATARI_ETHERNEC_PHYS_ADDR), 0xf);
+		if (hwreg_present(enec_virt)) {
+			error = platform_add_devices(atari_netusbee_devices,
+						ARRAY_SIZE(atari_netusbee_devices));
+			if (error && !rv)
+				rv = error;
+		}
+		iounmap(enec_virt);
+	}
+#endif
+
+	return rv;
+}
+
+arch_initcall(atari_platform_init);
diff --git a/arch/m68k/atari/debug.c b/arch/m68k/atari/debug.c
index ace05f79d96..03cb5e08d7c 100644
--- a/arch/m68k/atari/debug.c
+++ b/arch/m68k/atari/debug.c
@@ -10,338 +10,320 @@
  * for more details.
  */
 
-#include <linux/config.h>
 #include <linux/types.h>
 #include <linux/tty.h>
 #include <linux/console.h>
 #include <linux/init.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 
 #include <asm/atarihw.h>
 #include <asm/atariints.h>
 
-extern char m68k_debug_device[];
-
-/* Flag that Modem1 port is already initialized and used */
-int atari_MFP_init_done;
-/* Flag that Modem1 port is already initialized and used */
-int atari_SCC_init_done;
 /* Can be set somewhere, if a SCC master reset has already be done and should
  * not be repeated; used by kgdb */
 int atari_SCC_reset_done;
+EXPORT_SYMBOL(atari_SCC_reset_done);
 
 static struct console atari_console_driver = {
-	.name =		"debug",
-	.flags =	CON_PRINTBUFFER,
-	.index =	-1,
+	.name	= "debug",
+	.flags	= CON_PRINTBUFFER,
+	.index	= -1,
 };
 
 
-static inline void ata_mfp_out (char c)
+static inline void ata_mfp_out(char c)
 {
-    while (!(mfp.trn_stat & 0x80)) /* wait for tx buf empty */
-	barrier ();
-    mfp.usart_dta = c;
+	while (!(st_mfp.trn_stat & 0x80))	/* wait for tx buf empty */
+		barrier();
+	st_mfp.usart_dta = c;
 }
 
-void atari_mfp_console_write (struct console *co, const char *str,
-			      unsigned int count)
+static void atari_mfp_console_write(struct console *co, const char *str,
+				    unsigned int count)
 {
-    while (count--) {
-	if (*str == '\n')
-	    ata_mfp_out( '\r' );
-	ata_mfp_out( *str++ );
-    }
+	while (count--) {
+		if (*str == '\n')
+			ata_mfp_out('\r');
+		ata_mfp_out(*str++);
+	}
 }
 
-static inline void ata_scc_out (char c)
+static inline void ata_scc_out(char c)
 {
-    do {
+	do {
+		MFPDELAY();
+	} while (!(atari_scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */
 	MFPDELAY();
-    } while (!(scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */
-    MFPDELAY();
-    scc.cha_b_data = c;
+	atari_scc.cha_b_data = c;
 }
 
-void atari_scc_console_write (struct console *co, const char *str,
-			      unsigned int count)
+static void atari_scc_console_write(struct console *co, const char *str,
+				    unsigned int count)
 {
-    while (count--) {
-	if (*str == '\n')
-	    ata_scc_out( '\r' );
-	ata_scc_out( *str++ );
-    }
+	while (count--) {
+		if (*str == '\n')
+			ata_scc_out('\r');
+		ata_scc_out(*str++);
+	}
 }
 
-static inline void ata_midi_out (char c)
+static inline void ata_midi_out(char c)
 {
-    while (!(acia.mid_ctrl & ACIA_TDRE)) /* wait for tx buf empty */
-	barrier ();
-    acia.mid_data = c;
+	while (!(acia.mid_ctrl & ACIA_TDRE))	/* wait for tx buf empty */
+		barrier();
+	acia.mid_data = c;
 }
 
-void atari_midi_console_write (struct console *co, const char *str,
-			       unsigned int count)
+static void atari_midi_console_write(struct console *co, const char *str,
+				     unsigned int count)
 {
-    while (count--) {
-	if (*str == '\n')
-	    ata_midi_out( '\r' );
-	ata_midi_out( *str++ );
-    }
+	while (count--) {
+		if (*str == '\n')
+			ata_midi_out('\r');
+		ata_midi_out(*str++);
+	}
 }
 
-static int ata_par_out (char c)
+static int ata_par_out(char c)
 {
-    unsigned char tmp;
-    /* This a some-seconds timeout in case no printer is connected */
-    unsigned long i = loops_per_jiffy > 1 ? loops_per_jiffy : 10000000/HZ;
-
-    while( (mfp.par_dt_reg & 1) && --i ) /* wait for BUSY == L */
-	;
-    if (!i) return( 0 );
-
-    sound_ym.rd_data_reg_sel = 15;  /* select port B */
-    sound_ym.wd_data = c;           /* put char onto port */
-    sound_ym.rd_data_reg_sel = 14;  /* select port A */
-    tmp = sound_ym.rd_data_reg_sel;
-    sound_ym.wd_data = tmp & ~0x20; /* set strobe L */
-    MFPDELAY();                     /* wait a bit */
-    sound_ym.wd_data = tmp | 0x20;  /* set strobe H */
-    return( 1 );
+	unsigned char tmp;
+	/* This a some-seconds timeout in case no printer is connected */
+	unsigned long i = loops_per_jiffy > 1 ? loops_per_jiffy : 10000000/HZ;
+
+	while ((st_mfp.par_dt_reg & 1) && --i) /* wait for BUSY == L */
+		;
+	if (!i)
+		return 0;
+
+	sound_ym.rd_data_reg_sel = 15;	/* select port B */
+	sound_ym.wd_data = c;		/* put char onto port */
+	sound_ym.rd_data_reg_sel = 14;	/* select port A */
+	tmp = sound_ym.rd_data_reg_sel;
+	sound_ym.wd_data = tmp & ~0x20;	/* set strobe L */
+	MFPDELAY();			/* wait a bit */
+	sound_ym.wd_data = tmp | 0x20;	/* set strobe H */
+	return 1;
 }
 
-static void atari_par_console_write (struct console *co, const char *str,
-				     unsigned int count)
+static void atari_par_console_write(struct console *co, const char *str,
+				    unsigned int count)
 {
-    static int printer_present = 1;
-
-    if (!printer_present)
-	return;
+	static int printer_present = 1;
 
-    while (count--) {
-	if (*str == '\n')
-	    if (!ata_par_out( '\r' )) {
-		printer_present = 0;
+	if (!printer_present)
 		return;
-	    }
-	if (!ata_par_out( *str++ )) {
-	    printer_present = 0;
-	    return;
+
+	while (count--) {
+		if (*str == '\n') {
+			if (!ata_par_out('\r')) {
+				printer_present = 0;
+				return;
+			}
+		}
+		if (!ata_par_out(*str++)) {
+			printer_present = 0;
+			return;
+		}
 	}
-    }
 }
 
-#ifdef CONFIG_SERIAL_CONSOLE
+#if 0
 int atari_mfp_console_wait_key(struct console *co)
 {
-    while( !(mfp.rcv_stat & 0x80) ) /* wait for rx buf filled */
-	barrier();
-    return( mfp.usart_dta );
+	while (!(st_mfp.rcv_stat & 0x80))	/* wait for rx buf filled */
+		barrier();
+	return st_mfp.usart_dta;
 }
 
 int atari_scc_console_wait_key(struct console *co)
 {
-    do {
+	do {
+		MFPDELAY();
+	} while (!(atari_scc.cha_b_ctrl & 0x01)); /* wait for rx buf filled */
 	MFPDELAY();
-    } while( !(scc.cha_b_ctrl & 0x01) ); /* wait for rx buf filled */
-    MFPDELAY();
-    return( scc.cha_b_data );
+	return atari_scc.cha_b_data;
 }
 
 int atari_midi_console_wait_key(struct console *co)
 {
-    while( !(acia.mid_ctrl & ACIA_RDRF) ) /* wait for rx buf filled */
-	barrier();
-    return( acia.mid_data );
+	while (!(acia.mid_ctrl & ACIA_RDRF)) /* wait for rx buf filled */
+		barrier();
+	return acia.mid_data;
 }
 #endif
 
-/* The following two functions do a quick'n'dirty initialization of the MFP or
+/*
+ * The following two functions do a quick'n'dirty initialization of the MFP or
  * SCC serial ports. They're used by the debugging interface, kgdb, and the
- * serial console code. */
-#ifndef CONFIG_SERIAL_CONSOLE
-static void __init atari_init_mfp_port( int cflag )
-#else
-void atari_init_mfp_port( int cflag )
-#endif
+ * serial console code.
+ */
+static void __init atari_init_mfp_port(int cflag)
 {
-    /* timer values for 1200...115200 bps; > 38400 select 110, 134, or 150
-     * bps, resp., and work only correct if there's a RSVE or RSSPEED */
-    static int baud_table[9] = { 16, 11, 8, 4, 2, 1, 175, 143, 128 };
-    int baud = cflag & CBAUD;
-    int parity = (cflag & PARENB) ? ((cflag & PARODD) ? 0x04 : 0x06) : 0;
-    int csize = ((cflag & CSIZE) == CS7) ? 0x20 : 0x00;
-
-    if (cflag & CBAUDEX)
-	baud += B38400;
-    if (baud < B1200 || baud > B38400+2)
-	baud = B9600; /* use default 9600bps for non-implemented rates */
-    baud -= B1200; /* baud_table[] starts at 1200bps */
-
-    mfp.trn_stat &= ~0x01; /* disable TX */
-    mfp.usart_ctr = parity | csize | 0x88; /* 1:16 clk mode, 1 stop bit */
-    mfp.tim_ct_cd &= 0x70;  /* stop timer D */
-    mfp.tim_dt_d = baud_table[baud];
-    mfp.tim_ct_cd |= 0x01;  /* start timer D, 1:4 */
-    mfp.trn_stat |= 0x01;  /* enable TX */
-
-    atari_MFP_init_done = 1;
+	/*
+	 * timer values for 1200...115200 bps; > 38400 select 110, 134, or 150
+	 * bps, resp., and work only correct if there's a RSVE or RSSPEED
+	 */
+	static int baud_table[9] = { 16, 11, 8, 4, 2, 1, 175, 143, 128 };
+	int baud = cflag & CBAUD;
+	int parity = (cflag & PARENB) ? ((cflag & PARODD) ? 0x04 : 0x06) : 0;
+	int csize = ((cflag & CSIZE) == CS7) ? 0x20 : 0x00;
+
+	if (cflag & CBAUDEX)
+		baud += B38400;
+	if (baud < B1200 || baud > B38400+2)
+		baud = B9600;		/* use default 9600bps for non-implemented rates */
+	baud -= B1200;			/* baud_table[] starts at 1200bps */
+
+	st_mfp.trn_stat &= ~0x01;	/* disable TX */
+	st_mfp.usart_ctr = parity | csize | 0x88; /* 1:16 clk mode, 1 stop bit */
+	st_mfp.tim_ct_cd &= 0x70;	/* stop timer D */
+	st_mfp.tim_dt_d = baud_table[baud];
+	st_mfp.tim_ct_cd |= 0x01;	/* start timer D, 1:4 */
+	st_mfp.trn_stat |= 0x01;	/* enable TX */
 }
 
-#define SCC_WRITE(reg,val)				\
-    do {						\
-	scc.cha_b_ctrl = (reg);				\
-	MFPDELAY();					\
-	scc.cha_b_ctrl = (val);				\
-	MFPDELAY();					\
-    } while(0)
+#define SCC_WRITE(reg, val)				\
+	do {						\
+		atari_scc.cha_b_ctrl = (reg);		\
+		MFPDELAY();				\
+		atari_scc.cha_b_ctrl = (val);		\
+		MFPDELAY();				\
+	} while (0)
 
 /* loops_per_jiffy isn't initialized yet, so we can't use udelay(). This does a
  * delay of ~ 60us. */
-#define LONG_DELAY()				\
-    do {					\
-	int i;					\
-	for( i = 100; i > 0; --i )		\
-	    MFPDELAY();				\
-    } while(0)
-
-#ifndef CONFIG_SERIAL_CONSOLE
-static void __init atari_init_scc_port( int cflag )
-#else
-void atari_init_scc_port( int cflag )
-#endif
+#define LONG_DELAY()					\
+	do {						\
+		int i;					\
+		for (i = 100; i > 0; --i)		\
+			MFPDELAY();			\
+	} while (0)
+
+static void __init atari_init_scc_port(int cflag)
 {
-    extern int atari_SCC_reset_done;
-    static int clksrc_table[9] =
-	/* reg 11: 0x50 = BRG, 0x00 = RTxC, 0x28 = TRxC */
-	{ 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x00, 0x00 };
-    static int brgsrc_table[9] =
-	/* reg 14: 0 = RTxC, 2 = PCLK */
-	{ 2, 2, 2, 2, 2, 2, 0, 2, 2 };
-    static int clkmode_table[9] =
-	/* reg 4: 0x40 = x16, 0x80 = x32, 0xc0 = x64 */
-	{ 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0xc0, 0x80 };
-    static int div_table[9] =
-	/* reg12 (BRG low) */
-	{ 208, 138, 103, 50, 24, 11, 1, 0, 0 };
-
-    int baud = cflag & CBAUD;
-    int clksrc, clkmode, div, reg3, reg5;
-
-    if (cflag & CBAUDEX)
-	baud += B38400;
-    if (baud < B1200 || baud > B38400+2)
-	baud = B9600; /* use default 9600bps for non-implemented rates */
-    baud -= B1200; /* tables starts at 1200bps */
-
-    clksrc  = clksrc_table[baud];
-    clkmode = clkmode_table[baud];
-    div     = div_table[baud];
-    if (ATARIHW_PRESENT(TT_MFP) && baud >= 6) {
-	/* special treatment for TT, where rates >= 38400 are done via TRxC */
-	clksrc = 0x28; /* TRxC */
-	clkmode = baud == 6 ? 0xc0 :
-		  baud == 7 ? 0x80 : /* really 76800bps */
-			      0x40;  /* really 153600bps */
-	div = 0;
-    }
-
-    reg3 = (cflag & CSIZE) == CS8 ? 0xc0 : 0x40;
-    reg5 = (cflag & CSIZE) == CS8 ? 0x60 : 0x20 | 0x82 /* assert DTR/RTS */;
-
-    (void)scc.cha_b_ctrl;	/* reset reg pointer */
-    SCC_WRITE( 9, 0xc0 );	/* reset */
-    LONG_DELAY();		/* extra delay after WR9 access */
-    SCC_WRITE( 4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03) : 0 |
-		  0x04 /* 1 stopbit */ |
-		  clkmode );
-    SCC_WRITE( 3, reg3 );
-    SCC_WRITE( 5, reg5 );
-    SCC_WRITE( 9, 0 );		/* no interrupts */
-    LONG_DELAY();		/* extra delay after WR9 access */
-    SCC_WRITE( 10, 0 );		/* NRZ mode */
-    SCC_WRITE( 11, clksrc );	/* main clock source */
-    SCC_WRITE( 12, div );	/* BRG value */
-    SCC_WRITE( 13, 0 );		/* BRG high byte */
-    SCC_WRITE( 14, brgsrc_table[baud] );
-    SCC_WRITE( 14, brgsrc_table[baud] | (div ? 1 : 0) );
-    SCC_WRITE( 3, reg3 | 1 );
-    SCC_WRITE( 5, reg5 | 8 );
-
-    atari_SCC_reset_done = 1;
-    atari_SCC_init_done = 1;
+	static int clksrc_table[9] =
+		/* reg 11: 0x50 = BRG, 0x00 = RTxC, 0x28 = TRxC */
+		{ 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x00, 0x00 };
+	static int brgsrc_table[9] =
+		/* reg 14: 0 = RTxC, 2 = PCLK */
+		{ 2, 2, 2, 2, 2, 2, 0, 2, 2 };
+	static int clkmode_table[9] =
+		/* reg 4: 0x40 = x16, 0x80 = x32, 0xc0 = x64 */
+		{ 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0xc0, 0x80 };
+	static int div_table[9] =
+		/* reg12 (BRG low) */
+		{ 208, 138, 103, 50, 24, 11, 1, 0, 0 };
+
+	int baud = cflag & CBAUD;
+	int clksrc, clkmode, div, reg3, reg5;
+
+	if (cflag & CBAUDEX)
+		baud += B38400;
+	if (baud < B1200 || baud > B38400+2)
+		baud = B9600;		/* use default 9600bps for non-implemented rates */
+	baud -= B1200;			/* tables starts at 1200bps */
+
+	clksrc  = clksrc_table[baud];
+	clkmode = clkmode_table[baud];
+	div     = div_table[baud];
+	if (ATARIHW_PRESENT(TT_MFP) && baud >= 6) {
+		/* special treatment for TT, where rates >= 38400 are done via TRxC */
+		clksrc = 0x28;		/* TRxC */
+		clkmode = baud == 6 ? 0xc0 :
+			  baud == 7 ? 0x80 : /* really 76800bps */
+				      0x40;  /* really 153600bps */
+		div = 0;
+	}
+
+	reg3 = (cflag & CSIZE) == CS8 ? 0xc0 : 0x40;
+	reg5 = (cflag & CSIZE) == CS8 ? 0x60 : 0x20 | 0x82 /* assert DTR/RTS */;
+
+	(void)atari_scc.cha_b_ctrl;	/* reset reg pointer */
+	SCC_WRITE(9, 0xc0);		/* reset */
+	LONG_DELAY();			/* extra delay after WR9 access */
+	SCC_WRITE(4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03)
+				      : 0 | 0x04 /* 1 stopbit */ | clkmode);
+	SCC_WRITE(3, reg3);
+	SCC_WRITE(5, reg5);
+	SCC_WRITE(9, 0);		/* no interrupts */
+	LONG_DELAY();			/* extra delay after WR9 access */
+	SCC_WRITE(10, 0);		/* NRZ mode */
+	SCC_WRITE(11, clksrc);		/* main clock source */
+	SCC_WRITE(12, div);		/* BRG value */
+	SCC_WRITE(13, 0);		/* BRG high byte */
+	SCC_WRITE(14, brgsrc_table[baud]);
+	SCC_WRITE(14, brgsrc_table[baud] | (div ? 1 : 0));
+	SCC_WRITE(3, reg3 | 1);
+	SCC_WRITE(5, reg5 | 8);
+
+	atari_SCC_reset_done = 1;
 }
 
-#ifndef CONFIG_SERIAL_CONSOLE
-static void __init atari_init_midi_port( int cflag )
-#else
-void atari_init_midi_port( int cflag )
-#endif
+static void __init atari_init_midi_port(int cflag)
 {
-    int baud = cflag & CBAUD;
-    int csize = ((cflag & CSIZE) == CS8) ? 0x10 : 0x00;
-    /* warning 7N1 isn't possible! (instead 7O2 is used...) */
-    int parity = (cflag & PARENB) ? ((cflag & PARODD) ? 0x0c : 0x08) : 0x04;
-    int div;
-
-    /* 4800 selects 7812.5, 115200 selects 500000, all other (incl. 9600 as
-     * default) the standard MIDI speed 31250. */
-    if (cflag & CBAUDEX)
-	baud += B38400;
-    if (baud == B4800)
-	div = ACIA_DIV64; /* really 7812.5 bps */
-    else if (baud == B38400+2 /* 115200 */)
-	div = ACIA_DIV1; /* really 500 kbps (does that work??) */
-    else
-	div = ACIA_DIV16; /* 31250 bps, standard for MIDI */
-
-    /* RTS low, ints disabled */
-    acia.mid_ctrl = div | csize | parity |
+	int baud = cflag & CBAUD;
+	int csize = ((cflag & CSIZE) == CS8) ? 0x10 : 0x00;
+	/* warning 7N1 isn't possible! (instead 7O2 is used...) */
+	int parity = (cflag & PARENB) ? ((cflag & PARODD) ? 0x0c : 0x08) : 0x04;
+	int div;
+
+	/* 4800 selects 7812.5, 115200 selects 500000, all other (incl. 9600 as
+	 * default) the standard MIDI speed 31250. */
+	if (cflag & CBAUDEX)
+		baud += B38400;
+	if (baud == B4800)
+		div = ACIA_DIV64;	/* really 7812.5 bps */
+	else if (baud == B38400+2 /* 115200 */)
+		div = ACIA_DIV1;	/* really 500 kbps (does that work??) */
+	else
+		div = ACIA_DIV16;	/* 31250 bps, standard for MIDI */
+
+	/* RTS low, ints disabled */
+	acia.mid_ctrl = div | csize | parity |
 		    ((atari_switches & ATARI_SWITCH_MIDI) ?
 		     ACIA_RHTID : ACIA_RLTID);
 }
 
-void __init atari_debug_init(void)
+static int __init atari_debug_setup(char *arg)
 {
-    if (!strcmp( m68k_debug_device, "ser" )) {
-	/* defaults to ser2 for a Falcon and ser1 otherwise */
-	strcpy( m68k_debug_device, MACH_IS_FALCON ? "ser2" : "ser1" );
-
-    }
-
-    if (!strcmp( m68k_debug_device, "ser1" )) {
-	/* ST-MFP Modem1 serial port */
-	atari_init_mfp_port( B9600|CS8 );
-	atari_console_driver.write = atari_mfp_console_write;
-    }
-    else if (!strcmp( m68k_debug_device, "ser2" )) {
-	/* SCC Modem2 serial port */
-	atari_init_scc_port( B9600|CS8 );
-	atari_console_driver.write = atari_scc_console_write;
-    }
-    else if (!strcmp( m68k_debug_device, "midi" )) {
-	/* MIDI port */
-	atari_init_midi_port( B9600|CS8 );
-	atari_console_driver.write = atari_midi_console_write;
-    }
-    else if (!strcmp( m68k_debug_device, "par" )) {
-	/* parallel printer */
-	atari_turnoff_irq( IRQ_MFP_BUSY ); /* avoid ints */
-	sound_ym.rd_data_reg_sel = 7;  /* select mixer control */
-	sound_ym.wd_data = 0xff;       /* sound off, ports are output */
-	sound_ym.rd_data_reg_sel = 15; /* select port B */
-	sound_ym.wd_data = 0;          /* no char */
-	sound_ym.rd_data_reg_sel = 14; /* select port A */
-	sound_ym.wd_data = sound_ym.rd_data_reg_sel | 0x20; /* strobe H */
-	atari_console_driver.write = atari_par_console_write;
-    }
-    if (atari_console_driver.write)
-	register_console(&atari_console_driver);
+	bool registered;
+
+	if (!MACH_IS_ATARI)
+		return 0;
+
+	if (!strcmp(arg, "ser"))
+		/* defaults to ser2 for a Falcon and ser1 otherwise */
+		arg = MACH_IS_FALCON ? "ser2" : "ser1";
+
+	registered = !!atari_console_driver.write;
+	if (!strcmp(arg, "ser1")) {
+		/* ST-MFP Modem1 serial port */
+		atari_init_mfp_port(B9600|CS8);
+		atari_console_driver.write = atari_mfp_console_write;
+	} else if (!strcmp(arg, "ser2")) {
+		/* SCC Modem2 serial port */
+		atari_init_scc_port(B9600|CS8);
+		atari_console_driver.write = atari_scc_console_write;
+	} else if (!strcmp(arg, "midi")) {
+		/* MIDI port */
+		atari_init_midi_port(B9600|CS8);
+		atari_console_driver.write = atari_midi_console_write;
+	} else if (!strcmp(arg, "par")) {
+		/* parallel printer */
+		atari_turnoff_irq(IRQ_MFP_BUSY); /* avoid ints */
+		sound_ym.rd_data_reg_sel = 7;	/* select mixer control */
+		sound_ym.wd_data = 0xff;	/* sound off, ports are output */
+		sound_ym.rd_data_reg_sel = 15;	/* select port B */
+		sound_ym.wd_data = 0;		/* no char */
+		sound_ym.rd_data_reg_sel = 14;	/* select port A */
+		sound_ym.wd_data = sound_ym.rd_data_reg_sel | 0x20; /* strobe H */
+		atari_console_driver.write = atari_par_console_write;
+	}
+	if (atari_console_driver.write && !registered)
+		register_console(&atari_console_driver);
+
+	return 0;
 }
 
-/*
- * Local variables:
- *  c-indent-level: 4
- *  tab-width: 8
- * End:
- */
+early_param("debug", atari_debug_setup);
diff --git a/arch/m68k/atari/hades-pci.c b/arch/m68k/atari/hades-pci.c
deleted file mode 100644
index 8888debf71e..00000000000
--- a/arch/m68k/atari/hades-pci.c
+++ /dev/null
@@ -1,444 +0,0 @@
-/*
- * hades-pci.c - Hardware specific PCI BIOS functions the Hades Atari clone.
- *
- * Written by Wout Klaren.
- */
-
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/io.h>
-
-#if 0
-# define DBG_DEVS(args)		printk args
-#else
-# define DBG_DEVS(args)
-#endif
-
-#if defined(CONFIG_PCI) && defined(CONFIG_HADES)
-
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
-
-#include <asm/atarihw.h>
-#include <asm/atariints.h>
-#include <asm/byteorder.h>
-#include <asm/pci.h>
-
-#define HADES_MEM_BASE		0x80000000
-#define HADES_MEM_SIZE		0x20000000
-#define HADES_CONFIG_BASE	0xA0000000
-#define HADES_CONFIG_SIZE	0x10000000
-#define HADES_IO_BASE		0xB0000000
-#define HADES_IO_SIZE		0x10000000
-#define HADES_VIRT_IO_SIZE	0x00010000	/* Only 64k is remapped and actually used. */
-
-#define N_SLOTS				4			/* Number of PCI slots. */
-
-static const char pci_mem_name[] = "PCI memory space";
-static const char pci_io_name[] = "PCI I/O space";
-static const char pci_config_name[] = "PCI config space";
-
-static struct resource config_space = {
-    .name = pci_config_name,
-    .start = HADES_CONFIG_BASE,
-    .end = HADES_CONFIG_BASE + HADES_CONFIG_SIZE - 1
-};
-static struct resource io_space = {
-    .name = pci_io_name,
-    .start = HADES_IO_BASE,
-    .end = HADES_IO_BASE + HADES_IO_SIZE - 1
-};
-
-static const unsigned long pci_conf_base_phys[] = {
-    0xA0080000, 0xA0040000, 0xA0020000, 0xA0010000
-};
-static unsigned long pci_conf_base_virt[N_SLOTS];
-static unsigned long pci_io_base_virt;
-
-/*
- * static void *mk_conf_addr(unsigned char bus, unsigned char device_fn,
- *			     unsigned char where)
- *
- * Calculate the address of the PCI configuration area of the given
- * device.
- *
- * BUG: boards with multiple functions are probably not correctly
- * supported.
- */
-
-static void *mk_conf_addr(struct pci_dev *dev, int where)
-{
-	int device = dev->devfn >> 3, function = dev->devfn & 7;
-	void *result;
-
-	DBG_DEVS(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x, pci_addr=0x%p)\n",
-		  dev->bus->number, dev->devfn, where, pci_addr));
-
-	if (device > 3)
-	{
-		DBG_DEVS(("mk_conf_addr: device (%d) > 3, returning NULL\n", device));
-		return NULL;
-	}
-
-	if (dev->bus->number != 0)
-	{
-		DBG_DEVS(("mk_conf_addr: bus (%d) > 0, returning NULL\n", device));
-		return NULL;
-	}
-
-	result = (void *) (pci_conf_base_virt[device] | (function << 8) | (where));
-	DBG_DEVS(("mk_conf_addr: returning pci_addr 0x%lx\n", (unsigned long) result));
-	return result;
-}
-
-static int hades_read_config_byte(struct pci_dev *dev, int where, u8 *value)
-{
-	volatile unsigned char *pci_addr;
-
-	*value = 0xff;
-
-	if ((pci_addr = (unsigned char *) mk_conf_addr(dev, where)) == NULL)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	*value = *pci_addr;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int hades_read_config_word(struct pci_dev *dev, int where, u16 *value)
-{
-	volatile unsigned short *pci_addr;
-
-	*value = 0xffff;
-
-	if (where & 0x1)
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-
-	if ((pci_addr = (unsigned short *) mk_conf_addr(dev, where)) == NULL)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	*value = le16_to_cpu(*pci_addr);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int hades_read_config_dword(struct pci_dev *dev, int where, u32 *value)
-{
-	volatile unsigned int *pci_addr;
-	unsigned char header_type;
-	int result;
-
-	*value = 0xffffffff;
-
-	if (where & 0x3)
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-
-	if ((pci_addr = (unsigned int *) mk_conf_addr(dev, where)) == NULL)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	*value = le32_to_cpu(*pci_addr);
-
-	/*
-	 * Check if the value is an address on the bus. If true, add the
-	 * base address of the PCI memory or PCI I/O area on the Hades.
-	 */
-
-	if ((result = hades_read_config_byte(dev, PCI_HEADER_TYPE,
-					     &header_type)) != PCIBIOS_SUCCESSFUL)
-		return result;
-
-	if (((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_1)) ||
-	    ((header_type != PCI_HEADER_TYPE_BRIDGE) && ((where >= PCI_BASE_ADDRESS_2) &&
-							 (where <= PCI_BASE_ADDRESS_5))))
-	{
-		if ((*value & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO)
-		{
-			/*
-			 * Base address register that contains an I/O address. If the
-			 * address is valid on the Hades (0 <= *value < HADES_VIRT_IO_SIZE),
-			 * add 'pci_io_base_virt' to the value.
-			 */
-
-			if (*value < HADES_VIRT_IO_SIZE)
-				*value += pci_io_base_virt;
-		}
-		else
-		{
-			/*
-			 * Base address register that contains an memory address. If the
-			 * address is valid on the Hades (0 <= *value < HADES_MEM_SIZE),
-			 * add HADES_MEM_BASE to the value.
-			 */
-
-			if (*value == 0)
-			{
-				/*
-				 * Base address is 0. Test if this base
-				 * address register is used.
-				 */
-
-				*pci_addr = 0xffffffff;
-				if (*pci_addr != 0)
-				{
-					*pci_addr = *value;
-					if (*value < HADES_MEM_SIZE)
-						*value += HADES_MEM_BASE;
-				}
-			}
-			else
-			{
-				if (*value < HADES_MEM_SIZE)
-					*value += HADES_MEM_BASE;
-			}
-		}
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int hades_write_config_byte(struct pci_dev *dev, int where, u8 value)
-{
-	volatile unsigned char *pci_addr;
-
-	if ((pci_addr = (unsigned char *) mk_conf_addr(dev, where)) == NULL)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	*pci_addr = value;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int hades_write_config_word(struct pci_dev *dev, int where, u16 value)
-{
-	volatile unsigned short *pci_addr;
-
-	if ((pci_addr = (unsigned short *) mk_conf_addr(dev, where)) == NULL)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	*pci_addr = cpu_to_le16(value);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int hades_write_config_dword(struct pci_dev *dev, int where, u32 value)
-{
-	volatile unsigned int *pci_addr;
-	unsigned char header_type;
-	int result;
-
-	if ((pci_addr = (unsigned int *) mk_conf_addr(dev, where)) == NULL)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	/*
-	 * Check if the value is an address on the bus. If true, subtract the
-	 * base address of the PCI memory or PCI I/O area on the Hades.
-	 */
-
-	if ((result = hades_read_config_byte(dev, PCI_HEADER_TYPE,
-					     &header_type)) != PCIBIOS_SUCCESSFUL)
-		return result;
-
-	if (((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_1)) ||
-	    ((header_type != PCI_HEADER_TYPE_BRIDGE) && ((where >= PCI_BASE_ADDRESS_2) &&
-							 (where <= PCI_BASE_ADDRESS_5))))
-	{
-		if ((value & PCI_BASE_ADDRESS_SPACE) ==
-		    PCI_BASE_ADDRESS_SPACE_IO)
-		{
-			/*
-			 * I/O address. Check if the address is valid address on
-			 * the Hades (pci_io_base_virt <= value < pci_io_base_virt +
-			 * HADES_VIRT_IO_SIZE) or if the value is 0xffffffff. If not
-			 * true do not write the base address register. If it is a
-			 * valid base address subtract 'pci_io_base_virt' from the value.
-			 */
-
-			if ((value >= pci_io_base_virt) && (value < (pci_io_base_virt +
-														 HADES_VIRT_IO_SIZE)))
-				value -= pci_io_base_virt;
-			else
-			{
-				if (value != 0xffffffff)
-					return PCIBIOS_SET_FAILED;
-			}
-		}
-		else
-		{
-			/*
-			 * Memory address. Check if the address is valid address on
-			 * the Hades (HADES_MEM_BASE <= value < HADES_MEM_BASE + HADES_MEM_SIZE) or
-			 * if the value is 0xffffffff. If not true do not write
-			 * the base address register. If it is a valid base address
-			 * subtract HADES_MEM_BASE from the value.
-			 */
-
-			if ((value >= HADES_MEM_BASE) && (value < (HADES_MEM_BASE + HADES_MEM_SIZE)))
-				value -= HADES_MEM_BASE;
-			else
-			{
-				if (value != 0xffffffff)
-					return PCIBIOS_SET_FAILED;
-			}
-		}
-	}
-
-	*pci_addr = cpu_to_le32(value);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-/*
- * static inline void hades_fixup(void)
- *
- * Assign IRQ numbers as used by Linux to the interrupt pins
- * of the PCI cards.
- */
-
-static void __init hades_fixup(int pci_modify)
-{
-	char irq_tab[4] = {
-		[0] = IRQ_TT_MFP_IO0,		/* Slot 0. */
-		[1] = IRQ_TT_MFP_IO1,		/* Slot 1. */
-		[2] = IRQ_TT_MFP_SCC,		/* Slot 2. */
-		[3] = IRQ_TT_MFP_SCSIDMA	/* Slot 3. */
-	};
-	struct pci_dev *dev = NULL;
-	unsigned char slot;
-
-	/*
-	 * Go through all devices, fixing up irqs as we see fit:
-	 */
-
-	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL)
-	{
-		if (dev->class >> 16 != PCI_BASE_CLASS_BRIDGE)
-		{
-			slot = PCI_SLOT(dev->devfn);	/* Determine slot number. */
-			dev->irq = irq_tab[slot];
-			if (pci_modify)
-				pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-		}
-	}
-}
-
-/*
- * static void hades_conf_device(struct pci_dev *dev)
- *
- * Machine dependent Configure the given device.
- *
- * Parameters:
- *
- * dev		- the pci device.
- */
-
-static void __init hades_conf_device(struct pci_dev *dev)
-{
-	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0);
-}
-
-static struct pci_ops hades_pci_ops = {
-	.read_byte =	hades_read_config_byte,
-	.read_word =	hades_read_config_word,
-	.read_dword =	hades_read_config_dword,
-	.write_byte =	hades_write_config_byte,
-	.write_word =	hades_write_config_word,
-	.write_dword =	hades_write_config_dword
-};
-
-/*
- * struct pci_bus_info *init_hades_pci(void)
- *
- * Machine specific initialisation:
- *
- * - Allocate and initialise a 'pci_bus_info' structure
- * - Initialise hardware
- *
- * Result: pointer to 'pci_bus_info' structure.
- */
-
-struct pci_bus_info * __init init_hades_pci(void)
-{
-	struct pci_bus_info *bus;
-	int i;
-
-	/*
-	 * Remap I/O and configuration space.
-	 */
-
-	pci_io_base_virt = (unsigned long) ioremap(HADES_IO_BASE, HADES_VIRT_IO_SIZE);
-
-	for (i = 0; i < N_SLOTS; i++)
-		pci_conf_base_virt[i] = (unsigned long) ioremap(pci_conf_base_phys[i], 0x10000);
-
-	/*
-	 * Allocate memory for bus info structure.
-	 */
-
-	bus = kmalloc(sizeof(struct pci_bus_info), GFP_KERNEL);
-	if (!bus)
-		return NULL;
-	memset(bus, 0, sizeof(struct pci_bus_info));
-
-	/*
-	 * Claim resources. The m68k has no separate I/O space, both
-	 * PCI memory space and PCI I/O space are in memory space. Therefore
-	 * the I/O resources are requested in memory space as well.
-	 */
-
-	if (request_resource(&iomem_resource, &config_space) != 0)
-	{
-		kfree(bus);
-		return NULL;
-	}
-
-	if (request_resource(&iomem_resource, &io_space) != 0)
-	{
-		release_resource(&config_space);
-		kfree(bus);
-		return NULL;
-	}
-
-	bus->mem_space.start = HADES_MEM_BASE;
-	bus->mem_space.end = HADES_MEM_BASE + HADES_MEM_SIZE - 1;
-	bus->mem_space.name = pci_mem_name;
-#if 1
-	if (request_resource(&iomem_resource, &bus->mem_space) != 0)
-	{
-		release_resource(&io_space);
-		release_resource(&config_space);
-		kfree(bus);
-		return NULL;
-	}
-#endif
-	bus->io_space.start = pci_io_base_virt;
-	bus->io_space.end = pci_io_base_virt + HADES_VIRT_IO_SIZE - 1;
-	bus->io_space.name = pci_io_name;
-#if 1
-	if (request_resource(&ioport_resource, &bus->io_space) != 0)
-	{
-		release_resource(&bus->mem_space);
-		release_resource(&io_space);
-		release_resource(&config_space);
-		kfree(bus);
-		return NULL;
-	}
-#endif
-	/*
-	 * Set hardware dependent functions.
-	 */
-
-	bus->m68k_pci_ops = &hades_pci_ops;
-	bus->fixup = hades_fixup;
-	bus->conf_device = hades_conf_device;
-
-	/*
-	 * Select high to low edge for PCI interrupts.
-	 */
-
-	tt_mfp.active_edge &= ~0x27;
-
-	return bus;
-}
-#endif
diff --git a/arch/m68k/atari/stdma.c b/arch/m68k/atari/stdma.c
index 288f5e6a124..ddbf43ca885 100644
--- a/arch/m68k/atari/stdma.c
+++ b/arch/m68k/atari/stdma.c
@@ -35,6 +35,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/wait.h>
+#include <linux/module.h>
 
 #include <asm/atari_stdma.h>
 #include <asm/atariints.h>
@@ -44,7 +45,7 @@
 
 static int stdma_locked;			/* the semaphore */
 						/* int func to be called */
-static irqreturn_t (*stdma_isr)(int, void *, struct pt_regs *);
+static irq_handler_t stdma_isr;
 static void *stdma_isr_data;			/* data passed to isr */
 static DECLARE_WAIT_QUEUE_HEAD(stdma_wait);	/* wait queue for ST-DMA */
 
@@ -53,7 +54,7 @@ static DECLARE_WAIT_QUEUE_HEAD(stdma_wait);	/* wait queue for ST-DMA */
 
 /***************************** Prototypes *****************************/
 
-static irqreturn_t stdma_int (int irq, void *dummy, struct pt_regs *fp);
+static irqreturn_t stdma_int (int irq, void *dummy);
 
 /************************* End of Prototypes **************************/
 
@@ -75,8 +76,7 @@ static irqreturn_t stdma_int (int irq, void *dummy, struct pt_regs *fp);
  *
  */
 
-void stdma_lock(irqreturn_t (*handler)(int, void *, struct pt_regs *),
-		void *data)
+void stdma_lock(irq_handler_t handler, void *data)
 {
 	unsigned long flags;
 
@@ -92,6 +92,7 @@ void stdma_lock(irqreturn_t (*handler)(int, void *, struct pt_regs *),
 	stdma_isr_data = data;
 	local_irq_restore(flags);
 }
+EXPORT_SYMBOL(stdma_lock);
 
 
 /*
@@ -118,6 +119,7 @@ void stdma_release(void)
 
 	local_irq_restore(flags);
 }
+EXPORT_SYMBOL(stdma_release);
 
 
 /*
@@ -135,6 +137,7 @@ int stdma_others_waiting(void)
 {
 	return waitqueue_active(&stdma_wait);
 }
+EXPORT_SYMBOL(stdma_others_waiting);
 
 
 /*
@@ -156,6 +159,7 @@ int stdma_islocked(void)
 {
 	return stdma_locked;
 }
+EXPORT_SYMBOL(stdma_islocked);
 
 
 /*
@@ -175,8 +179,9 @@ int stdma_islocked(void)
 void __init stdma_init(void)
 {
 	stdma_isr = NULL;
-	request_irq(IRQ_MFP_FDC, stdma_int, IRQ_TYPE_SLOW,
-	            "ST-DMA: floppy/ACSI/IDE/Falcon-SCSI", stdma_int);
+	if (request_irq(IRQ_MFP_FDC, stdma_int, IRQ_TYPE_SLOW | IRQF_SHARED,
+			"ST-DMA floppy,ACSI,IDE,Falcon-SCSI", stdma_int))
+		pr_err("Couldn't register ST-DMA interrupt\n");
 }
 
 
@@ -188,9 +193,9 @@ void __init stdma_init(void)
  *
  */
 
-static irqreturn_t stdma_int(int irq, void *dummy, struct pt_regs *fp)
+static irqreturn_t stdma_int(int irq, void *dummy)
 {
   if (stdma_isr)
-      (*stdma_isr)(irq, stdma_isr_data, fp);
+      (*stdma_isr)(irq, stdma_isr_data);
   return IRQ_HANDLED;
 }
diff --git a/arch/m68k/atari/stram.c b/arch/m68k/atari/stram.c
index 22e0481a5f7..5f8cb5a234d 100644
--- a/arch/m68k/atari/stram.c
+++ b/arch/m68k/atari/stram.c
@@ -1,5 +1,5 @@
 /*
- * arch/m68k/atari/stram.c: Functions for ST-RAM allocations
+ * Functions for ST-RAM allocations
  *
  * Copyright 1994-97 Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de>
  *
@@ -8,7 +8,6 @@
  * for more details.
  */
 
-#include <linux/config.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
@@ -21,6 +20,7 @@
 #include <linux/bootmem.h>
 #include <linux/mount.h>
 #include <linux/blkdev.h>
+#include <linux/module.h>
 
 #include <asm/setup.h>
 #include <asm/machdep.h>
@@ -29,92 +29,37 @@
 #include <asm/atarihw.h>
 #include <asm/atari_stram.h>
 #include <asm/io.h>
-#include <asm/semaphore.h>
 
-#undef DEBUG
-
-#ifdef DEBUG
-#define	DPRINTK(fmt,args...) printk( fmt, ##args )
-#else
-#define DPRINTK(fmt,args...)
-#endif
-
-#if defined(CONFIG_PROC_FS) && defined(CONFIG_STRAM_PROC)
-/* abbrev for the && above... */
-#define DO_PROC
-#include <linux/proc_fs.h>
-#endif
 
 /*
- * ++roman:
- *
- * New version of ST-Ram buffer allocation. Instead of using the
- * 1 MB - 4 KB that remain when the ST-Ram chunk starts at $1000
- * (1 MB granularity!), such buffers are reserved like this:
- *
- *  - If the kernel resides in ST-Ram anyway, we can take the buffer
- *    from behind the current kernel data space the normal way
- *    (incrementing start_mem).
- *
- *  - If the kernel is in TT-Ram, stram_init() initializes start and
- *    end of the available region. Buffers are allocated from there
- *    and mem_init() later marks the such used pages as reserved.
- *    Since each TT-Ram chunk is at least 4 MB in size, I hope there
- *    won't be an overrun of the ST-Ram region by normal kernel data
- *    space.
- *
- * For that, ST-Ram may only be allocated while kernel initialization
- * is going on, or exactly: before mem_init() is called. There is also
- * no provision now for freeing ST-Ram buffers. It seems that isn't
- * really needed.
- *
+ * The ST-RAM allocator allocates memory from a pool of reserved ST-RAM of
+ * configurable size, set aside on ST-RAM init.
+ * As long as this pool is not exhausted, allocation of real ST-RAM can be
+ * guaranteed.
  */
 
-/* Start and end (virtual) of ST-RAM */
-static void *stram_start, *stram_end;
-
-/* set after memory_init() executed and allocations via start_mem aren't
- * possible anymore */
-static int mem_init_done;
-
 /* set if kernel is in ST-RAM */
 static int kernel_in_stram;
 
-typedef struct stram_block {
-	struct stram_block *next;
-	void *start;
-	unsigned long size;
-	unsigned flags;
-	const char *owner;
-} BLOCK;
-
-/* values for flags field */
-#define BLOCK_FREE	0x01	/* free structure in the BLOCKs pool */
-#define BLOCK_KMALLOCED	0x02	/* structure allocated by kmalloc() */
-#define BLOCK_GFP	0x08	/* block allocated with __get_dma_pages() */
+static struct resource stram_pool = {
+	.name = "ST-RAM Pool"
+};
 
-/* list of allocated blocks */
-static BLOCK *alloc_list;
+static unsigned long pool_size = 1024*1024;
 
-/* We can't always use kmalloc() to allocate BLOCK structures, since
- * stram_alloc() can be called rather early. So we need some pool of
- * statically allocated structures. 20 of them is more than enough, so in most
- * cases we never should need to call kmalloc(). */
-#define N_STATIC_BLOCKS	20
-static BLOCK static_blocks[N_STATIC_BLOCKS];
+static unsigned long stram_virt_offset;
 
-/***************************** Prototypes *****************************/
+static int __init atari_stram_setup(char *arg)
+{
+	if (!MACH_IS_ATARI)
+		return 0;
 
-static BLOCK *add_region( void *addr, unsigned long size );
-static BLOCK *find_region( void *addr );
-static int remove_region( BLOCK *block );
+	pool_size = memparse(arg, NULL);
+	return 0;
+}
 
-/************************* End of Prototypes **************************/
+early_param("stram_pool", atari_stram_setup);
 
-
-/* ------------------------------------------------------------------------ */
-/*							   Public Interface								*/
-/* ------------------------------------------------------------------------ */
 
 /*
  * This init function is called very early by atari/config.c
@@ -124,236 +69,129 @@ void __init atari_stram_init(void)
 {
 	int i;
 
-	/* initialize static blocks */
-	for( i = 0; i < N_STATIC_BLOCKS; ++i )
-		static_blocks[i].flags = BLOCK_FREE;
-
-	/* determine whether kernel code resides in ST-RAM (then ST-RAM is the
-	 * first memory block at virtual 0x0) */
-	stram_start = phys_to_virt(0);
-	kernel_in_stram = (stram_start == 0);
+	/*
+	 * determine whether kernel code resides in ST-RAM
+	 * (then ST-RAM is the first memory block at virtual 0x0)
+	 */
+	kernel_in_stram = (m68k_memory[0].addr == 0);
 
-	for( i = 0; i < m68k_num_memory; ++i ) {
+	for (i = 0; i < m68k_num_memory; ++i) {
 		if (m68k_memory[i].addr == 0) {
-			/* skip first 2kB or page (supervisor-only!) */
-			stram_end = stram_start + m68k_memory[i].size;
 			return;
 		}
 	}
+
 	/* Should never come here! (There is always ST-Ram!) */
-	panic( "atari_stram_init: no ST-RAM found!" );
+	panic("atari_stram_init: no ST-RAM found!");
 }
 
 
 /*
  * This function is called from setup_arch() to reserve the pages needed for
- * ST-RAM management.
+ * ST-RAM management, if the kernel resides in ST-RAM.
  */
 void __init atari_stram_reserve_pages(void *start_mem)
 {
-	/* always reserve first page of ST-RAM, the first 2 kB are
-	 * supervisor-only! */
-	if (!kernel_in_stram)
-		reserve_bootmem (0, PAGE_SIZE);
-
-}
-
-void atari_stram_mem_init_hook (void)
-{
-	mem_init_done = 1;
+	if (kernel_in_stram) {
+		pr_debug("atari_stram pool: kernel in ST-RAM, using alloc_bootmem!\n");
+		stram_pool.start = (resource_size_t)alloc_bootmem_low_pages(pool_size);
+		stram_pool.end = stram_pool.start + pool_size - 1;
+		request_resource(&iomem_resource, &stram_pool);
+		stram_virt_offset = 0;
+		pr_debug("atari_stram pool: size = %lu bytes, resource = %pR\n",
+			pool_size, &stram_pool);
+		pr_debug("atari_stram pool: stram_virt_offset = %lx\n",
+			stram_virt_offset);
+	}
 }
 
 
 /*
- * This is main public interface: somehow allocate a ST-RAM block
- *
- *  - If we're before mem_init(), we have to make a static allocation. The
- *    region is taken in the kernel data area (if the kernel is in ST-RAM) or
- *    from the start of ST-RAM (if the kernel is in TT-RAM) and added to the
- *    rsvd_stram_* region. The ST-RAM is somewhere in the middle of kernel
- *    address space in the latter case.
- *
- *  - If mem_init() already has been called, try with __get_dma_pages().
- *    This has the disadvantage that it's very hard to get more than 1 page,
- *    and it is likely to fail :-(
- *
+ * This function is called as arch initcall to reserve the pages needed for
+ * ST-RAM management, if the kernel does not reside in ST-RAM.
  */
-void *atari_stram_alloc(long size, const char *owner)
+int __init atari_stram_map_pages(void)
 {
-	void *addr = NULL;
-	BLOCK *block;
-	int flags;
-
-	DPRINTK("atari_stram_alloc(size=%08lx,owner=%s)\n", size, owner);
-
-	if (!mem_init_done)
-		return alloc_bootmem_low(size);
-	else {
-		/* After mem_init(): can only resort to __get_dma_pages() */
-		addr = (void *)__get_dma_pages(GFP_KERNEL, get_order(size));
-		flags = BLOCK_GFP;
-		DPRINTK( "atari_stram_alloc: after mem_init, "
-				 "get_pages=%p\n", addr );
-	}
-
-	if (addr) {
-		if (!(block = add_region( addr, size ))) {
-			/* out of memory for BLOCK structure :-( */
-			DPRINTK( "atari_stram_alloc: out of mem for BLOCK -- "
-					 "freeing again\n" );
-			free_pages((unsigned long)addr, get_order(size));
-			return( NULL );
-		}
-		block->owner = owner;
-		block->flags |= flags;
+	if (!kernel_in_stram) {
+		/*
+		 * Skip page 0, as the fhe first 2 KiB are supervisor-only!
+		 */
+		pr_debug("atari_stram pool: kernel not in ST-RAM, using ioremap!\n");
+		stram_pool.start = PAGE_SIZE;
+		stram_pool.end = stram_pool.start + pool_size - 1;
+		request_resource(&iomem_resource, &stram_pool);
+		stram_virt_offset = (unsigned long) ioremap(stram_pool.start,
+				resource_size(&stram_pool)) - stram_pool.start;
+		pr_debug("atari_stram pool: size = %lu bytes, resource = %pR\n",
+			pool_size, &stram_pool);
+		pr_debug("atari_stram pool: stram_virt_offset = %lx\n",
+			stram_virt_offset);
 	}
-	return( addr );
+	return 0;
 }
+arch_initcall(atari_stram_map_pages);
 
-void atari_stram_free( void *addr )
 
+void *atari_stram_to_virt(unsigned long phys)
 {
-	BLOCK *block;
-
-	DPRINTK( "atari_stram_free(addr=%p)\n", addr );
-
-	if (!(block = find_region( addr ))) {
-		printk( KERN_ERR "Attempt to free non-allocated ST-RAM block at %p "
-				"from %p\n", addr, __builtin_return_address(0) );
-		return;
-	}
-	DPRINTK( "atari_stram_free: found block (%p): size=%08lx, owner=%s, "
-			 "flags=%02x\n", block, block->size, block->owner, block->flags );
-
-	if (!(block->flags & BLOCK_GFP))
-		goto fail;
-
-	DPRINTK("atari_stram_free: is kmalloced, order_size=%d\n",
-		get_order(block->size));
-	free_pages((unsigned long)addr, get_order(block->size));
-	remove_region( block );
-	return;
-
-  fail:
-	printk( KERN_ERR "atari_stram_free: cannot free block at %p "
-			"(called from %p)\n", addr, __builtin_return_address(0) );
+	return (void *)(phys + stram_virt_offset);
 }
+EXPORT_SYMBOL(atari_stram_to_virt);
 
-
-/* ------------------------------------------------------------------------ */
-/*							  Region Management								*/
-/* ------------------------------------------------------------------------ */
 
-
-/* insert a region into the alloced list (sorted) */
-static BLOCK *add_region( void *addr, unsigned long size )
+unsigned long atari_stram_to_phys(void *virt)
 {
-	BLOCK **p, *n = NULL;
-	int i;
-
-	for( i = 0; i < N_STATIC_BLOCKS; ++i ) {
-		if (static_blocks[i].flags & BLOCK_FREE) {
-			n = &static_blocks[i];
-			n->flags = 0;
-			break;
-		}
-	}
-	if (!n && mem_init_done) {
-		/* if statics block pool exhausted and we can call kmalloc() already
-		 * (after mem_init()), try that */
-		n = kmalloc( sizeof(BLOCK), GFP_KERNEL );
-		if (n)
-			n->flags = BLOCK_KMALLOCED;
-	}
-	if (!n) {
-		printk( KERN_ERR "Out of memory for ST-RAM descriptor blocks\n" );
-		return( NULL );
-	}
-	n->start = addr;
-	n->size  = size;
-
-	for( p = &alloc_list; *p; p = &((*p)->next) )
-		if ((*p)->start > addr) break;
-	n->next = *p;
-	*p = n;
-
-	return( n );
+	return (unsigned long)(virt - stram_virt_offset);
 }
+EXPORT_SYMBOL(atari_stram_to_phys);
 
 
-/* find a region (by start addr) in the alloced list */
-static BLOCK *find_region( void *addr )
+void *atari_stram_alloc(unsigned long size, const char *owner)
 {
-	BLOCK *p;
-
-	for( p = alloc_list; p; p = p->next ) {
-		if (p->start == addr)
-			return( p );
-		if (p->start > addr)
-			break;
+	struct resource *res;
+	int error;
+
+	pr_debug("atari_stram_alloc: allocate %lu bytes\n", size);
+
+	/* round up */
+	size = PAGE_ALIGN(size);
+
+	res = kzalloc(sizeof(struct resource), GFP_KERNEL);
+	if (!res)
+		return NULL;
+
+	res->name = owner;
+	error = allocate_resource(&stram_pool, res, size, 0, UINT_MAX,
+				  PAGE_SIZE, NULL, NULL);
+	if (error < 0) {
+		pr_err("atari_stram_alloc: allocate_resource() failed %d!\n",
+		       error);
+		kfree(res);
+		return NULL;
 	}
-	return( NULL );
-}
-
 
-/* remove a block from the alloced list */
-static int remove_region( BLOCK *block )
-{
-	BLOCK **p;
-
-	for( p = &alloc_list; *p; p = &((*p)->next) )
-		if (*p == block) break;
-	if (!*p)
-		return( 0 );
-
-	*p = block->next;
-	if (block->flags & BLOCK_KMALLOCED)
-		kfree( block );
-	else
-		block->flags |= BLOCK_FREE;
-	return( 1 );
+	pr_debug("atari_stram_alloc: returning %pR\n", res);
+	return atari_stram_to_virt(res->start);
 }
+EXPORT_SYMBOL(atari_stram_alloc);
 
 
-
-/* ------------------------------------------------------------------------ */
-/*						 /proc statistics file stuff						*/
-/* ------------------------------------------------------------------------ */
-
-#ifdef DO_PROC
-
-#define	PRINT_PROC(fmt,args...) len += sprintf( buf+len, fmt, ##args )
-
-int get_stram_list( char *buf )
+void atari_stram_free(void *addr)
 {
-	int len = 0;
-	BLOCK *p;
-
-	PRINT_PROC("Total ST-RAM:      %8u kB\n",
-			   (stram_end - stram_start) >> 10);
-	PRINT_PROC( "Allocated regions:\n" );
-	for( p = alloc_list; p; p = p->next ) {
-		if (len + 50 >= PAGE_SIZE)
-			break;
-		PRINT_PROC("0x%08lx-0x%08lx: %s (",
-			   virt_to_phys(p->start),
-			   virt_to_phys(p->start+p->size-1),
-			   p->owner);
-		if (p->flags & BLOCK_GFP)
-			PRINT_PROC( "page-alloced)\n" );
-		else
-			PRINT_PROC( "??)\n" );
+	unsigned long start = atari_stram_to_phys(addr);
+	struct resource *res;
+	unsigned long size;
+
+	res = lookup_resource(&stram_pool, start);
+	if (!res) {
+		pr_err("atari_stram_free: trying to free nonexistent region "
+		       "at %p\n", addr);
+		return;
 	}
 
-	return( len );
+	size = resource_size(res);
+	pr_debug("atari_stram_free: free %lu bytes at %p\n", size, addr);
+	release_resource(res);
+	kfree(res);
 }
-
-#endif
-
-
-/*
- * Local variables:
- *  c-indent-level: 4
- *  tab-width: 4
- * End:
- */
+EXPORT_SYMBOL(atari_stram_free);
diff --git a/arch/m68k/atari/time.c b/arch/m68k/atari/time.c
index e79bbc94216..da8f981c36d 100644
--- a/arch/m68k/atari/time.c
+++ b/arch/m68k/atari/time.c
@@ -16,19 +16,25 @@
 #include <linux/init.h>
 #include <linux/rtc.h>
 #include <linux/bcd.h>
+#include <linux/delay.h>
+#include <linux/export.h>
 
 #include <asm/atariints.h>
 
+DEFINE_SPINLOCK(rtc_lock);
+EXPORT_SYMBOL_GPL(rtc_lock);
+
 void __init
-atari_sched_init(irqreturn_t (*timer_routine)(int, void *, struct pt_regs *))
+atari_sched_init(irq_handler_t timer_routine)
 {
     /* set Timer C data Register */
-    mfp.tim_dt_c = INT_TICKS;
+    st_mfp.tim_dt_c = INT_TICKS;
     /* start timer C, div = 1:100 */
-    mfp.tim_ct_cd = (mfp.tim_ct_cd & 15) | 0x60;
+    st_mfp.tim_ct_cd = (st_mfp.tim_ct_cd & 15) | 0x60;
     /* install interrupt service routine for MFP Timer C */
-    request_irq(IRQ_MFP_TIMC, timer_routine, IRQ_TYPE_SLOW,
-                "timer", timer_routine);
+    if (request_irq(IRQ_MFP_TIMC, timer_routine, IRQ_TYPE_SLOW,
+		    "timer", timer_routine))
+	pr_err("Couldn't register timer interrupt\n");
 }
 
 /* ++andreas: gettimeoffset fixed to check for pending interrupt */
@@ -36,22 +42,22 @@ atari_sched_init(irqreturn_t (*timer_routine)(int, void *, struct pt_regs *))
 #define TICK_SIZE 10000
 
 /* This is always executed with interrupts disabled.  */
-unsigned long atari_gettimeoffset (void)
+u32 atari_gettimeoffset(void)
 {
-  unsigned long ticks, offset = 0;
+  u32 ticks, offset = 0;
 
   /* read MFP timer C current value */
-  ticks = mfp.tim_dt_c;
+  ticks = st_mfp.tim_dt_c;
   /* The probability of underflow is less than 2% */
   if (ticks > INT_TICKS - INT_TICKS / 50)
     /* Check for pending timer interrupt */
-    if (mfp.int_pn_b & (1 << 5))
+    if (st_mfp.int_pn_b & (1 << 5))
       offset = TICK_SIZE;
 
   ticks = INT_TICKS - ticks;
   ticks = ticks * 10000L / INT_TICKS;
 
-  return ticks + offset;
+  return (ticks + offset) * 1000;
 }
 
 
@@ -190,13 +196,14 @@ int atari_tt_hwclk( int op, struct rtc_time *t )
         }
 
         if (!(ctrl & RTC_DM_BINARY)) {
-            BIN_TO_BCD(sec);
-            BIN_TO_BCD(min);
-            BIN_TO_BCD(hour);
-            BIN_TO_BCD(day);
-            BIN_TO_BCD(mon);
-            BIN_TO_BCD(year);
-            if (wday >= 0) BIN_TO_BCD(wday);
+	    sec = bin2bcd(sec);
+	    min = bin2bcd(min);
+	    hour = bin2bcd(hour);
+	    day = bin2bcd(day);
+	    mon = bin2bcd(mon);
+	    year = bin2bcd(year);
+	    if (wday >= 0)
+		wday = bin2bcd(wday);
         }
     }
 
@@ -212,8 +219,12 @@ int atari_tt_hwclk( int op, struct rtc_time *t )
      * additionally the RTC_SET bit is set to prevent an update cycle.
      */
 
-    while( RTC_READ(RTC_FREQ_SELECT) & RTC_UIP )
-        schedule_timeout_interruptible(HWCLK_POLL_INTERVAL);
+    while( RTC_READ(RTC_FREQ_SELECT) & RTC_UIP ) {
+	if (in_atomic() || irqs_disabled())
+	    mdelay(1);
+	else
+	    schedule_timeout_interruptible(HWCLK_POLL_INTERVAL);
+    }
 
     local_irq_save(flags);
     RTC_WRITE( RTC_CONTROL, ctrl | RTC_SET );
@@ -247,13 +258,13 @@ int atari_tt_hwclk( int op, struct rtc_time *t )
 	}
 
 	if (!(ctrl & RTC_DM_BINARY)) {
-            BCD_TO_BIN(sec);
-            BCD_TO_BIN(min);
-            BCD_TO_BIN(hour);
-            BCD_TO_BIN(day);
-            BCD_TO_BIN(mon);
-            BCD_TO_BIN(year);
-            BCD_TO_BIN(wday);
+	    sec = bcd2bin(sec);
+	    min = bcd2bin(min);
+	    hour = bcd2bin(hour);
+	    day = bcd2bin(day);
+	    mon = bcd2bin(mon);
+	    year = bcd2bin(year);
+	    wday = bcd2bin(wday);
         }
 
         if (!(ctrl & RTC_24H)) {
@@ -313,7 +324,7 @@ int atari_tt_set_clock_mmss (unsigned long nowtime)
 
     rtc_minutes = RTC_READ (RTC_MINUTES);
     if (!(save_control & RTC_DM_BINARY))
-        BCD_TO_BIN (rtc_minutes);
+	rtc_minutes = bcd2bin(rtc_minutes);
 
     /* Since we're only adjusting minutes and seconds, don't interfere
        with hour overflow.  This avoids messing with unknown time zones
@@ -324,8 +335,8 @@ int atari_tt_set_clock_mmss (unsigned long nowtime)
         {
             if (!(save_control & RTC_DM_BINARY))
                 {
-                    BIN_TO_BCD (real_seconds);
-                    BIN_TO_BCD (real_minutes);
+		    real_seconds = bin2bcd(real_seconds);
+		    real_minutes = bin2bcd(real_minutes);
                 }
             RTC_WRITE (RTC_SECONDS, real_seconds);
             RTC_WRITE (RTC_MINUTES, real_minutes);
diff --git a/arch/m68k/bvme6000/Makefile b/arch/m68k/bvme6000/Makefile
index 2348e6ceed1..d8174004fe2 100644
--- a/arch/m68k/bvme6000/Makefile
+++ b/arch/m68k/bvme6000/Makefile
@@ -2,4 +2,4 @@
 # Makefile for Linux arch/m68k/bvme6000 source directory
 #
 
-obj-y		:= config.o bvmeints.o rtc.o
+obj-y		:= config.o rtc.o
diff --git a/arch/m68k/bvme6000/bvmeints.c b/arch/m68k/bvme6000/bvmeints.c
deleted file mode 100644
index 298a8df0266..00000000000
--- a/arch/m68k/bvme6000/bvmeints.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * arch/m68k/bvme6000/bvmeints.c
- *
- * Copyright (C) 1997 Richard Hirst [richard@sleepie.demon.co.uk]
- *
- * based on amiints.c -- Amiga Linux interrupt handling code
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file README.legal in the main directory of this archive
- * for more details.
- *
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/seq_file.h>
-
-#include <asm/ptrace.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/traps.h>
-
-static irqreturn_t bvme6000_defhand (int irq, void *dev_id, struct pt_regs *fp);
-
-/*
- * This should ideally be 4 elements only, for speed.
- */
-
-static struct {
-	irqreturn_t	(*handler)(int, void *, struct pt_regs *);
-	unsigned long	flags;
-	void		*dev_id;
-	const char	*devname;
-	unsigned	count;
-} irq_tab[256];
-
-/*
- * void bvme6000_init_IRQ (void)
- *
- * Parameters:	None
- *
- * Returns:	Nothing
- *
- * This function is called during kernel startup to initialize
- * the bvme6000 IRQ handling routines.
- */
-
-void bvme6000_init_IRQ (void)
-{
-	int i;
-
-	for (i = 0; i < 256; i++) {
-		irq_tab[i].handler = bvme6000_defhand;
-		irq_tab[i].flags = IRQ_FLG_STD;
-		irq_tab[i].dev_id = NULL;
-		irq_tab[i].devname = NULL;
-		irq_tab[i].count = 0;
-	}
-}
-
-int bvme6000_request_irq(unsigned int irq,
-		irqreturn_t (*handler)(int, void *, struct pt_regs *),
-                unsigned long flags, const char *devname, void *dev_id)
-{
-	if (irq > 255) {
-		printk("%s: Incorrect IRQ %d from %s\n", __FUNCTION__, irq, devname);
-		return -ENXIO;
-	}
-#if 0
-	/* Nothing special about auto-vectored devices for the BVME6000,
-	 * but treat it specially to avoid changes elsewhere.
-	 */
-
-	if (irq >= VEC_INT1 && irq <= VEC_INT7)
-		return cpu_request_irq(irq - VEC_SPUR, handler, flags,
-						devname, dev_id);
-#endif
-	if (!(irq_tab[irq].flags & IRQ_FLG_STD)) {
-		if (irq_tab[irq].flags & IRQ_FLG_LOCK) {
-			printk("%s: IRQ %d from %s is not replaceable\n",
-			       __FUNCTION__, irq, irq_tab[irq].devname);
-			return -EBUSY;
-		}
-		if (flags & IRQ_FLG_REPLACE) {
-			printk("%s: %s can't replace IRQ %d from %s\n",
-			       __FUNCTION__, devname, irq, irq_tab[irq].devname);
-			return -EBUSY;
-		}
-	}
-	irq_tab[irq].handler = handler;
-	irq_tab[irq].flags   = flags;
-	irq_tab[irq].dev_id  = dev_id;
-	irq_tab[irq].devname = devname;
-	return 0;
-}
-
-void bvme6000_free_irq(unsigned int irq, void *dev_id)
-{
-	if (irq > 255) {
-		printk("%s: Incorrect IRQ %d\n", __FUNCTION__, irq);
-		return;
-	}
-#if 0
-	if (irq >= VEC_INT1 && irq <= VEC_INT7) {
-		cpu_free_irq(irq - VEC_SPUR, dev_id);
-		return;
-	}
-#endif
-	if (irq_tab[irq].dev_id != dev_id)
-		printk("%s: Removing probably wrong IRQ %d from %s\n",
-		       __FUNCTION__, irq, irq_tab[irq].devname);
-
-	irq_tab[irq].handler = bvme6000_defhand;
-	irq_tab[irq].flags   = IRQ_FLG_STD;
-	irq_tab[irq].dev_id  = NULL;
-	irq_tab[irq].devname = NULL;
-}
-
-irqreturn_t bvme6000_process_int (unsigned long vec, struct pt_regs *fp)
-{
-	if (vec > 255) {
-		printk ("bvme6000_process_int: Illegal vector %ld", vec);
-		return IRQ_NONE;
-	} else {
-		irq_tab[vec].count++;
-		irq_tab[vec].handler(vec, irq_tab[vec].dev_id, fp);
-		return IRQ_HANDLED;
-	}
-}
-
-int show_bvme6000_interrupts(struct seq_file *p, void *v)
-{
-	int i;
-
-	for (i = 0; i < 256; i++) {
-		if (irq_tab[i].count)
-			seq_printf(p, "Vec 0x%02x: %8d  %s\n",
-			    i, irq_tab[i].count,
-			    irq_tab[i].devname ? irq_tab[i].devname : "free");
-	}
-	return 0;
-}
-
-
-static irqreturn_t bvme6000_defhand (int irq, void *dev_id, struct pt_regs *fp)
-{
-	printk ("Unknown interrupt 0x%02x\n", irq);
-	return IRQ_NONE;
-}
-
-void bvme6000_enable_irq (unsigned int irq)
-{
-}
-
-
-void bvme6000_disable_irq (unsigned int irq)
-{
-}
-
diff --git a/arch/m68k/bvme6000/config.c b/arch/m68k/bvme6000/config.c
index 3ffc84f9c29..478623dbb20 100644
--- a/arch/m68k/bvme6000/config.c
+++ b/arch/m68k/bvme6000/config.c
@@ -25,9 +25,11 @@
 #include <linux/genhd.h>
 #include <linux/rtc.h>
 #include <linux/interrupt.h>
+#include <linux/bcd.h>
 
 #include <asm/bootinfo.h>
-#include <asm/system.h>
+#include <asm/bootinfo-vme.h>
+#include <asm/byteorder.h>
 #include <asm/pgtable.h>
 #include <asm/setup.h>
 #include <asm/irq.h>
@@ -36,35 +38,23 @@
 #include <asm/machdep.h>
 #include <asm/bvme6000hw.h>
 
-extern irqreturn_t bvme6000_process_int (int level, struct pt_regs *regs);
-extern void bvme6000_init_IRQ (void);
-extern void bvme6000_free_irq (unsigned int, void *);
-extern int  show_bvme6000_interrupts(struct seq_file *, void *);
-extern void bvme6000_enable_irq (unsigned int);
-extern void bvme6000_disable_irq (unsigned int);
 static void bvme6000_get_model(char *model);
-static int  bvme6000_get_hardware_list(char *buffer);
-extern int  bvme6000_request_irq(unsigned int irq, irqreturn_t (*handler)(int, void *, struct pt_regs *), unsigned long flags, const char *devname, void *dev_id);
-extern void bvme6000_sched_init(irqreturn_t (*handler)(int, void *, struct pt_regs *));
-extern unsigned long bvme6000_gettimeoffset (void);
+extern void bvme6000_sched_init(irq_handler_t handler);
+extern u32 bvme6000_gettimeoffset(void);
 extern int bvme6000_hwclk (int, struct rtc_time *);
 extern int bvme6000_set_clock_mmss (unsigned long);
 extern void bvme6000_reset (void);
-extern void bvme6000_waitbut(void);
 void bvme6000_set_vectors (void);
 
-static unsigned char bcd2bin (unsigned char b);
-static unsigned char bin2bcd (unsigned char b);
+/* Save tick handler routine pointer, will point to xtime_update() in
+ * kernel/timer/timekeeping.c, called via bvme6000_process_int() */
 
-/* Save tick handler routine pointer, will point to do_timer() in
- * kernel/sched.c, called via bvme6000_process_int() */
+static irq_handler_t tick_handler;
 
-static irqreturn_t (*tick_handler)(int, void *, struct pt_regs *);
 
-
-int bvme6000_parse_bootinfo(const struct bi_record *bi)
+int __init bvme6000_parse_bootinfo(const struct bi_record *bi)
 {
-	if (bi->tag == BI_VME_TYPE)
+	if (be16_to_cpu(bi->tag) == BI_VME_TYPE)
 		return 0;
 	else
 		return 1;
@@ -91,16 +81,15 @@ static void bvme6000_get_model(char *model)
     sprintf(model, "BVME%d000", m68k_cputype == CPU_68060 ? 6 : 4);
 }
 
-
-/* No hardware options on BVME6000? */
-
-static int bvme6000_get_hardware_list(char *buffer)
+/*
+ * This function is called during kernel startup to initialize
+ * the bvme6000 IRQ handling routines.
+ */
+static void __init bvme6000_init_IRQ(void)
 {
-    *buffer = '\0';
-    return 0;
+	m68k_setup_user_interrupt(VEC_USER, 192);
 }
 
-
 void __init config_bvme6000(void)
 {
     volatile PitRegsPtr pit = (PitRegsPtr)BVME_PIT_BASE;
@@ -123,18 +112,11 @@ void __init config_bvme6000(void)
     mach_max_dma_address = 0xffffffff;
     mach_sched_init      = bvme6000_sched_init;
     mach_init_IRQ        = bvme6000_init_IRQ;
-    mach_gettimeoffset   = bvme6000_gettimeoffset;
+    arch_gettimeoffset   = bvme6000_gettimeoffset;
     mach_hwclk           = bvme6000_hwclk;
     mach_set_clock_mmss	 = bvme6000_set_clock_mmss;
     mach_reset		 = bvme6000_reset;
-    mach_free_irq	 = bvme6000_free_irq;
-    mach_process_int	 = bvme6000_process_int;
-    mach_get_irq_list	 = show_bvme6000_interrupts;
-    mach_request_irq	 = bvme6000_request_irq;
-    enable_irq		 = bvme6000_enable_irq;
-    disable_irq          = bvme6000_disable_irq;
     mach_get_model       = bvme6000_get_model;
-    mach_get_hardware_list = bvme6000_get_hardware_list;
 
     printk ("Board is %sconfigured as a System Controller\n",
 		*config_reg_ptr & BVME_CONFIG_SW1 ? "" : "not ");
@@ -142,7 +124,7 @@ void __init config_bvme6000(void)
     /* Now do the PIT configuration */
 
     pit->pgcr	= 0x00;	/* Unidirectional 8 bit, no handshake for now */
-    pit->psrr	= 0x18;	/* PIACK and PIRQ fucntions enabled */
+    pit->psrr	= 0x18;	/* PIACK and PIRQ functions enabled */
     pit->pacr	= 0x00;	/* Sub Mode 00, H2 i/p, no DMA */
     pit->padr	= 0x00;	/* Just to be tidy! */
     pit->paddr	= 0x00;	/* All inputs for now (safest) */
@@ -159,7 +141,7 @@ void __init config_bvme6000(void)
 }
 
 
-irqreturn_t bvme6000_abort_int (int irq, void *dev_id, struct pt_regs *fp)
+irqreturn_t bvme6000_abort_int (int irq, void *dev_id)
 {
         unsigned long *new = (unsigned long *)vectors;
         unsigned long *old = (unsigned long *)0xf8000000;
@@ -176,14 +158,14 @@ irqreturn_t bvme6000_abort_int (int irq, void *dev_id, struct pt_regs *fp)
 }
 
 
-static irqreturn_t bvme6000_timer_int (int irq, void *dev_id, struct pt_regs *fp)
+static irqreturn_t bvme6000_timer_int (int irq, void *dev_id)
 {
     volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
     unsigned char msr = rtc->msr & 0xc0;
 
     rtc->msr = msr | 0x20;		/* Ack the interrupt */
 
-    return tick_handler(irq, dev_id, fp);
+    return tick_handler(irq, dev_id);
 }
 
 /*
@@ -195,7 +177,7 @@ static irqreturn_t bvme6000_timer_int (int irq, void *dev_id, struct pt_regs *fp
  * so divide by 8 to get the microsecond result.
  */
 
-void bvme6000_sched_init (irqreturn_t (*timer_routine)(int, void *, struct pt_regs *))
+void bvme6000_sched_init (irq_handler_t timer_routine)
 {
     volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
     unsigned char msr = rtc->msr & 0xc0;
@@ -236,13 +218,13 @@ void bvme6000_sched_init (irqreturn_t (*timer_routine)(int, void *, struct pt_re
  * results...
  */
 
-unsigned long bvme6000_gettimeoffset (void)
+u32 bvme6000_gettimeoffset(void)
 {
     volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
     volatile PitRegsPtr pit = (PitRegsPtr)BVME_PIT_BASE;
     unsigned char msr = rtc->msr & 0xc0;
     unsigned char t1int, t1op;
-    unsigned long v = 800000, ov;
+    u32 v = 800000, ov;
 
     rtc->msr = 0;	/* Ensure timer registers accessible */
 
@@ -266,20 +248,9 @@ unsigned long bvme6000_gettimeoffset (void)
 	v += 10000;			/* Int pending, + 10ms */
     rtc->msr = msr;
 
-    return v;
+    return v * 1000;
 }
 
-static unsigned char bcd2bin (unsigned char b)
-{
-	return ((b>>4)*10 + (b&15));
-}
-
-static unsigned char bin2bcd (unsigned char b)
-{
-	return (((b/10)*16) + (b%10));
-}
-
-
 /*
  * Looks like op is non-zero for setting the clock, and zero for
  * reading the clock.
diff --git a/arch/m68k/bvme6000/rtc.c b/arch/m68k/bvme6000/rtc.c
index 703cbc6dc9c..cf12a17dc28 100644
--- a/arch/m68k/bvme6000/rtc.c
+++ b/arch/m68k/bvme6000/rtc.c
@@ -9,7 +9,6 @@
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/miscdevice.h>
-#include <linux/slab.h>
 #include <linux/ioport.h>
 #include <linux/capability.h>
 #include <linux/fcntl.h>
@@ -17,12 +16,11 @@
 #include <linux/poll.h>
 #include <linux/module.h>
 #include <linux/mc146818rtc.h>	/* For struct rtc_time and ioctls, etc */
-#include <linux/smp_lock.h>
+#include <linux/bcd.h>
 #include <asm/bvme6000hw.h>
 
 #include <asm/io.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <asm/setup.h>
 
 /*
@@ -32,16 +30,12 @@
  *	ioctls.
  */
 
-#define BCD2BIN(val) (((val)&15) + ((val)>>4)*10)
-#define BIN2BCD(val) ((((val)/10)<<4) + (val)%10)
-
 static unsigned char days_in_mo[] =
 {0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
 
-static char rtc_status;
+static atomic_t rtc_status = ATOMIC_INIT(1);
 
-static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-		     unsigned long arg)
+static long rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
 	unsigned char msr;
@@ -58,16 +52,16 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 		rtc->msr = 0x40;
 		memset(&wtime, 0, sizeof(struct rtc_time));
 		do {
-			wtime.tm_sec =  BCD2BIN(rtc->bcd_sec);
-			wtime.tm_min =  BCD2BIN(rtc->bcd_min);
-			wtime.tm_hour = BCD2BIN(rtc->bcd_hr);
-			wtime.tm_mday =  BCD2BIN(rtc->bcd_dom);
-			wtime.tm_mon =  BCD2BIN(rtc->bcd_mth)-1;
-			wtime.tm_year = BCD2BIN(rtc->bcd_year);
+			wtime.tm_sec =  bcd2bin(rtc->bcd_sec);
+			wtime.tm_min =  bcd2bin(rtc->bcd_min);
+			wtime.tm_hour = bcd2bin(rtc->bcd_hr);
+			wtime.tm_mday =  bcd2bin(rtc->bcd_dom);
+			wtime.tm_mon =  bcd2bin(rtc->bcd_mth)-1;
+			wtime.tm_year = bcd2bin(rtc->bcd_year);
 			if (wtime.tm_year < 70)
 				wtime.tm_year += 100;
-			wtime.tm_wday = BCD2BIN(rtc->bcd_dow)-1;
-		} while (wtime.tm_sec != BCD2BIN(rtc->bcd_sec));
+			wtime.tm_wday = bcd2bin(rtc->bcd_dow)-1;
+		} while (wtime.tm_sec != bcd2bin(rtc->bcd_sec));
 		rtc->msr = msr;
 		local_irq_restore(flags);
 		return copy_to_user(argp, &wtime, sizeof wtime) ?
@@ -115,14 +109,14 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 
 		rtc->t0cr_rtmr = yrs%4;
 		rtc->bcd_tenms = 0;
-		rtc->bcd_sec   = BIN2BCD(sec);
-		rtc->bcd_min   = BIN2BCD(min);
-		rtc->bcd_hr    = BIN2BCD(hrs);
-		rtc->bcd_dom   = BIN2BCD(day);
-		rtc->bcd_mth   = BIN2BCD(mon);
-		rtc->bcd_year  = BIN2BCD(yrs%100);
+		rtc->bcd_sec   = bin2bcd(sec);
+		rtc->bcd_min   = bin2bcd(min);
+		rtc->bcd_hr    = bin2bcd(hrs);
+		rtc->bcd_dom   = bin2bcd(day);
+		rtc->bcd_mth   = bin2bcd(mon);
+		rtc->bcd_year  = bin2bcd(yrs%100);
 		if (rtc_tm.tm_wday >= 0)
-			rtc->bcd_dow = BIN2BCD(rtc_tm.tm_wday+1);
+			rtc->bcd_dow = bin2bcd(rtc_tm.tm_wday+1);
 		rtc->t0cr_rtmr = yrs%4 | 0x08;
 
 		rtc->msr = msr;
@@ -135,25 +129,20 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 }
 
 /*
- *	We enforce only one user at a time here with the open/close.
- *	Also clear the previous interrupt data on an open, and clean
- *	up things on a close.
+ * We enforce only one user at a time here with the open/close.
  */
-
 static int rtc_open(struct inode *inode, struct file *file)
 {
-	if(rtc_status)
+	if (!atomic_dec_and_test(&rtc_status)) {
+		atomic_inc(&rtc_status);
 		return -EBUSY;
-
-	rtc_status = 1;
+	}
 	return 0;
 }
 
 static int rtc_release(struct inode *inode, struct file *file)
 {
-	lock_kernel();
-	rtc_status = 0;
-	unlock_kernel();
+	atomic_inc(&rtc_status);
 	return 0;
 }
 
@@ -161,10 +150,11 @@ static int rtc_release(struct inode *inode, struct file *file)
  *	The various file operations we support.
  */
 
-static struct file_operations rtc_fops = {
-	.ioctl =	rtc_ioctl,
-	.open =		rtc_open,
-	.release =	rtc_release,
+static const struct file_operations rtc_fops = {
+	.unlocked_ioctl	= rtc_ioctl,
+	.open		= rtc_open,
+	.release	= rtc_release,
+	.llseek		= noop_llseek,
 };
 
 static struct miscdevice rtc_dev = {
diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index 5649fbae430..d7eac833a94 100644
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -1,905 +1,430 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:23 2005
-#
-CONFIG_M68K=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-amiga"
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Platform dependent setup
-#
-# CONFIG_SUN3 is not set
-CONFIG_AMIGA=y
-# CONFIG_ATARI is not set
-# CONFIG_MAC is not set
-# CONFIG_APOLLO is not set
-# CONFIG_VME is not set
-# CONFIG_HP300 is not set
-# CONFIG_SUN3X is not set
-# CONFIG_Q40 is not set
-
-#
-# Processor type
-#
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ATARI_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_SUN_PARTITION=y
+# CONFIG_EFI_PARTITION is not set
+CONFIG_SYSV68_PARTITION=y
+CONFIG_IOSCHED_DEADLINE=m
+CONFIG_KEXEC=y
+CONFIG_BOOTINFO_PROC=y
 CONFIG_M68020=y
 CONFIG_M68030=y
 CONFIG_M68040=y
 CONFIG_M68060=y
-CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
-# CONFIG_ADVANCED is not set
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
+CONFIG_AMIGA=y
 CONFIG_ZORRO=y
 CONFIG_AMIGA_PCMCIA=y
-# CONFIG_HEARTBEAT is not set
-CONFIG_PROC_HARDWARE=y
-CONFIG_ISA=y
-CONFIG_GENERIC_ISA_DMA=y
 CONFIG_ZORRO_NAMES=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=m
-# CONFIG_PARPORT_PC is not set
-CONFIG_PARPORT_NOT_PC=y
-CONFIG_PARPORT_AMIGA=m
-CONFIG_PARPORT_MFC3=m
-# CONFIG_PARPORT_GSC is not set
-CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-CONFIG_AMIGA_FLOPPY=y
-CONFIG_AMIGA_Z2RAM=y
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEFLOPPY=m
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_GAYLE=y
-CONFIG_BLK_DEV_IDEDOUBLER=y
-CONFIG_BLK_DEV_BUDDHA=y
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_DEBUG is not set
-CONFIG_A3000_SCSI=y
-CONFIG_A2091_SCSI=y
-CONFIG_GVP11_SCSI=y
-CONFIG_CYBERSTORM_SCSI=y
-CONFIG_CYBERSTORMII_SCSI=y
-CONFIG_BLZ2060_SCSI=y
-CONFIG_BLZ1230_SCSI=y
-CONFIG_FASTLANE_SCSI=y
-CONFIG_OKTAGON_SCSI=y
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
+# CONFIG_COMPACTION is not set
+CONFIG_CLEANCACHE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
+CONFIG_PACKET_DIAG=m
 CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
 CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
 CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+CONFIG_NET_IPVTI=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_VTI=m
+CONFIG_IPV6_GRE=m
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_TABLES=m
+CONFIG_NF_TABLES_INET=m
+CONFIG_NFT_EXTHDR=m
+CONFIG_NFT_META=m
+CONFIG_NFT_CT=m
+CONFIG_NFT_RBTREE=m
+CONFIG_NFT_HASH=m
+CONFIG_NFT_COUNTER=m
+CONFIG_NFT_LOG=m
+CONFIG_NFT_LIMIT=m
+CONFIG_NFT_NAT=m
+CONFIG_NFT_QUEUE=m
+CONFIG_NFT_REJECT=m
+CONFIG_NFT_COMPAT=m
+CONFIG_NETFILTER_XT_SET=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NETPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETNET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NFT_CHAIN_NAT_IPV4=m
+CONFIG_NF_TABLES_ARP=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT_IPV4=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_IP6_NF_QUEUE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_CHAIN_NAT_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_SYNPROXY=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+CONFIG_NF_NAT_IPV6=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
+CONFIG_NF_TABLES_BRIDGE=m
+CONFIG_IP_DCCP=m
+# CONFIG_IP_DCCP_CCID3 is not set
+CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_RDS=m
+CONFIG_RDS_TCP=m
+CONFIG_L2TP=m
 CONFIG_ATALK=m
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_DAT=y
+CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
+CONFIG_NETLINK_DIAG=m
+CONFIG_NET_MPLS_GSO=m
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_FW_LOADER_USER_HELPER is not set
+CONFIG_CONNECTOR=m
+CONFIG_PARPORT=m
+CONFIG_PARPORT_AMIGA=m
+CONFIG_PARPORT_MFC3=m
+CONFIG_PARPORT_1284=y
+CONFIG_AMIGA_FLOPPY=y
+CONFIG_AMIGA_Z2RAM=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_ATA_OVER_ETH=m
+CONFIG_DUMMY_IRQ=m
+CONFIG_IDE=y
+CONFIG_IDE_GD_ATAPI=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_GAYLE=y
+CONFIG_BLK_DEV_BUDDHA=y
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=m
+CONFIG_A3000_SCSI=y
+CONFIG_A2091_SCSI=y
+CONFIG_GVP11_SCSI=y
+CONFIG_SCSI_A4000T=y
+CONFIG_SCSI_ZORRO7XX=y
+CONFIG_MD=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_RAID=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_UEVENT=y
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
 CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_ARIADNE=m
-CONFIG_A2065=m
-CONFIG_HYDRA=m
-CONFIG_ZORRO8390=m
-CONFIG_APNE=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_BROADCAST=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_RANDOM=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_VXLAN=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_VETH=m
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PLIP=m
+CONFIG_A2065=y
+CONFIG_ARIADNE=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_HP is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+CONFIG_HYDRA=y
+CONFIG_APNE=y
+CONFIG_ZORRO8390=y
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
-CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=m
 CONFIG_KEYBOARD_AMIGA=y
-CONFIG_INPUT_MOUSE=y
+# CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-CONFIG_MOUSE_AMIGA=y
-# CONFIG_MOUSE_VSXXXAA is not set
+CONFIG_MOUSE_AMIGA=m
 CONFIG_INPUT_JOYSTICK=y
-# CONFIG_JOYSTICK_ANALOG is not set
-# CONFIG_JOYSTICK_A3D is not set
-# CONFIG_JOYSTICK_ADI is not set
-# CONFIG_JOYSTICK_COBRA is not set
-# CONFIG_JOYSTICK_GF2K is not set
-# CONFIG_JOYSTICK_GRIP is not set
-# CONFIG_JOYSTICK_GRIP_MP is not set
-# CONFIG_JOYSTICK_GUILLEMOT is not set
-# CONFIG_JOYSTICK_INTERACT is not set
-# CONFIG_JOYSTICK_SIDEWINDER is not set
-# CONFIG_JOYSTICK_TMDC is not set
-# CONFIG_JOYSTICK_IFORCE is not set
-# CONFIG_JOYSTICK_WARRIOR is not set
-# CONFIG_JOYSTICK_MAGELLAN is not set
-# CONFIG_JOYSTICK_SPACEORB is not set
-# CONFIG_JOYSTICK_SPACEBALL is not set
-# CONFIG_JOYSTICK_STINGER is not set
-# CONFIG_JOYSTICK_TWIDJOY is not set
-# CONFIG_JOYSTICK_DB9 is not set
-# CONFIG_JOYSTICK_GAMECON is not set
-# CONFIG_JOYSTICK_TURBOGRAFX is not set
 CONFIG_JOYSTICK_AMIGA=m
-# CONFIG_JOYSTICK_JOYDUMP is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_A2232=m
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_M68K_BEEP=m
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
 CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_GEN_RTC=m
-CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
+# CONFIG_HW_RANDOM is not set
+CONFIG_NTP_PPS=y
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PTP_1588_CLOCK=m
+# CONFIG_HWMON is not set
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_CIRRUS=m
+CONFIG_FB_CIRRUS=y
 CONFIG_FB_AMIGA=y
 CONFIG_FB_AMIGA_OCS=y
 CONFIG_FB_AMIGA_ECS=y
 CONFIG_FB_AMIGA_AGA=y
 CONFIG_FB_FM2=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_FONT_PEARL_8x8=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
 CONFIG_DMASOUND_PAULA=m
-CONFIG_DMASOUND=m
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# Character devices
-#
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+CONFIG_UHID=m
+# CONFIG_HID_GENERIC is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_MSM6242=m
+CONFIG_RTC_DRV_RP5C01=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_HEARTBEAT=y
+CONFIG_PROC_HARDWARE=y
 CONFIG_AMIGA_BUILTIN_SERIAL=y
-# CONFIG_WHIPPET_SERIAL is not set
-CONFIG_MULTIFACE_III_TTY=m
-# CONFIG_SERIAL_CONSOLE is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
+CONFIG_SERIAL_CONSOLE=y
+CONFIG_EXT4_FS=y
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
 CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
-# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FANOTIFY=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 CONFIG_AUTOFS4_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-CONFIG_AFFS_FS=y
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_ECRYPT_FS_MESSAGING=y
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_LZO=y
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
 CONFIG_HPFS_FS=m
-# CONFIG_QNX4FS_FS is not set
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=m
+CONFIG_NFS_SWAP=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_DEBUG is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_AMIGA_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -937,69 +462,66 @@ CONFIG_NLS_ISO8859_14=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
+CONFIG_DLM=m
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
+CONFIG_ASYNC_RAID6_TEST=m
+CONFIG_TEST_STRING_HELPERS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_LZ4=m
+CONFIG_CRYPTO_LZ4HC=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_TEST=m
diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index 63024b0b7ac..650ee75de6c 100644
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -1,752 +1,388 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:27 2005
-#
-CONFIG_M68K=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-apollo"
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Platform dependent setup
-#
-# CONFIG_SUN3 is not set
-# CONFIG_AMIGA is not set
-# CONFIG_ATARI is not set
-# CONFIG_MAC is not set
-CONFIG_APOLLO=y
-# CONFIG_VME is not set
-# CONFIG_HP300 is not set
-# CONFIG_SUN3X is not set
-# CONFIG_Q40 is not set
-
-#
-# Processor type
-#
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_ATARI_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_SUN_PARTITION=y
+# CONFIG_EFI_PARTITION is not set
+CONFIG_SYSV68_PARTITION=y
+CONFIG_IOSCHED_DEADLINE=m
+CONFIG_KEXEC=y
+CONFIG_BOOTINFO_PROC=y
 CONFIG_M68020=y
 CONFIG_M68030=y
 CONFIG_M68040=y
 CONFIG_M68060=y
-CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
-# CONFIG_ADVANCED is not set
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
+CONFIG_APOLLO=y
+# CONFIG_COMPACTION is not set
+CONFIG_CLEANCACHE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-CONFIG_HEARTBEAT=y
-CONFIG_PROC_HARDWARE=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
+CONFIG_PACKET_DIAG=m
 CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
 CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+CONFIG_NET_IPVTI=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_VTI=m
+CONFIG_IPV6_GRE=m
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_TABLES=m
+CONFIG_NF_TABLES_INET=m
+CONFIG_NFT_EXTHDR=m
+CONFIG_NFT_META=m
+CONFIG_NFT_CT=m
+CONFIG_NFT_RBTREE=m
+CONFIG_NFT_HASH=m
+CONFIG_NFT_COUNTER=m
+CONFIG_NFT_LOG=m
+CONFIG_NFT_LIMIT=m
+CONFIG_NFT_NAT=m
+CONFIG_NFT_QUEUE=m
+CONFIG_NFT_REJECT=m
+CONFIG_NFT_COMPAT=m
+CONFIG_NETFILTER_XT_SET=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NETPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETNET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NFT_CHAIN_NAT_IPV4=m
+CONFIG_NF_TABLES_ARP=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT_IPV4=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_IP6_NF_QUEUE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_CHAIN_NAT_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_SYNPROXY=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+CONFIG_NF_NAT_IPV6=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
+CONFIG_NF_TABLES_BRIDGE=m
+CONFIG_IP_DCCP=m
+# CONFIG_IP_DCCP_CCID3 is not set
+CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_RDS=m
+CONFIG_RDS_TCP=m
+CONFIG_L2TP=m
 CONFIG_ATALK=m
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_DAT=y
+CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
+CONFIG_NETLINK_DIAG=m
+CONFIG_NET_MPLS_GSO=m
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_FW_LOADER_USER_HELPER is not set
+CONFIG_CONNECTOR=m
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_ATA_OVER_ETH=m
+CONFIG_DUMMY_IRQ=m
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=m
+CONFIG_MD=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_RAID=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_UEVENT=y
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
 CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_APOLLO_ELPLUS=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_BROADCAST=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_RANDOM=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_VXLAN=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_VETH=m
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
-CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=m
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=m
+# CONFIG_MOUSE_PS2 is not set
 CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_LIBPS2=m
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# Character devices
-#
-CONFIG_DN_SERIAL=y
-CONFIG_SERIAL_CONSOLE=y
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_NTP_PPS=y
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PTP_1588_CLOCK=m
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+CONFIG_UHID=m
+# CONFIG_HID_GENERIC is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_GENERIC=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_HEARTBEAT=y
+CONFIG_PROC_HARDWARE=y
+CONFIG_EXT4_FS=y
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
 CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
-# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FANOTIFY=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 CONFIG_AUTOFS4_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
+CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_ECRYPT_FS_MESSAGING=y
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_LZO=y
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
 CONFIG_HPFS_FS=m
-# CONFIG_QNX4FS_FS is not set
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFS_V4=m
+CONFIG_NFS_SWAP=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_DEBUG is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -784,69 +420,66 @@ CONFIG_NLS_ISO8859_14=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
+CONFIG_DLM=m
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
+CONFIG_ASYNC_RAID6_TEST=m
+CONFIG_TEST_STRING_HELPERS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_LZ4=m
+CONFIG_CRYPTO_LZ4HC=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_TEST=m
diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index 6433da2d2ce..3142e69342f 100644
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -1,815 +1,405 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:32 2005
-#
-CONFIG_M68K=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-atari"
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Platform dependent setup
-#
-# CONFIG_SUN3 is not set
-# CONFIG_AMIGA is not set
-CONFIG_ATARI=y
-# CONFIG_MAC is not set
-# CONFIG_APOLLO is not set
-# CONFIG_VME is not set
-# CONFIG_HP300 is not set
-# CONFIG_SUN3X is not set
-# CONFIG_Q40 is not set
-
-#
-# Processor type
-#
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_SUN_PARTITION=y
+# CONFIG_EFI_PARTITION is not set
+CONFIG_SYSV68_PARTITION=y
+CONFIG_IOSCHED_DEADLINE=m
+CONFIG_KEXEC=y
+CONFIG_BOOTINFO_PROC=y
 CONFIG_M68020=y
 CONFIG_M68030=y
 CONFIG_M68040=y
 CONFIG_M68060=y
-CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
-# CONFIG_ADVANCED is not set
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
+CONFIG_ATARI=y
+# CONFIG_COMPACTION is not set
+CONFIG_CLEANCACHE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-CONFIG_STRAM_PROC=y
-CONFIG_HEARTBEAT=y
-CONFIG_PROC_HARDWARE=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=m
-# CONFIG_PARPORT_PC is not set
-CONFIG_PARPORT_NOT_PC=y
-CONFIG_PARPORT_ATARI=m
-# CONFIG_PARPORT_GSC is not set
-CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-CONFIG_ATARI_FLOPPY=y
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEFLOPPY=m
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_FALCON_IDE=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
+CONFIG_PACKET_DIAG=m
 CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
 CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
 CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+CONFIG_NET_IPVTI=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_VTI=m
+CONFIG_IPV6_GRE=m
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_TABLES=m
+CONFIG_NF_TABLES_INET=m
+CONFIG_NFT_EXTHDR=m
+CONFIG_NFT_META=m
+CONFIG_NFT_CT=m
+CONFIG_NFT_RBTREE=m
+CONFIG_NFT_HASH=m
+CONFIG_NFT_COUNTER=m
+CONFIG_NFT_LOG=m
+CONFIG_NFT_LIMIT=m
+CONFIG_NFT_NAT=m
+CONFIG_NFT_QUEUE=m
+CONFIG_NFT_REJECT=m
+CONFIG_NFT_COMPAT=m
+CONFIG_NETFILTER_XT_SET=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NETPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETNET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NFT_CHAIN_NAT_IPV4=m
+CONFIG_NF_TABLES_ARP=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT_IPV4=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_IP6_NF_QUEUE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_CHAIN_NAT_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_SYNPROXY=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+CONFIG_NF_NAT_IPV6=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
+CONFIG_NF_TABLES_BRIDGE=m
+CONFIG_IP_DCCP=m
+# CONFIG_IP_DCCP_CCID3 is not set
+CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_RDS=m
+CONFIG_RDS_TCP=m
+CONFIG_L2TP=m
 CONFIG_ATALK=m
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_DAT=y
+CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
+CONFIG_NETLINK_DIAG=m
+CONFIG_NET_MPLS_GSO=m
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_FW_LOADER_USER_HELPER is not set
+CONFIG_CONNECTOR=m
+CONFIG_PARPORT=m
+CONFIG_PARPORT_ATARI=m
+CONFIG_PARPORT_1284=y
+CONFIG_ATARI_FLOPPY=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_ATA_OVER_ETH=m
+CONFIG_DUMMY_IRQ=m
+CONFIG_IDE=y
+CONFIG_IDE_GD_ATAPI=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_FALCON_IDE=y
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=m
+CONFIG_ATARI_SCSI=y
+CONFIG_MD=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_RAID=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_UEVENT=y
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
 CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_ATARILANCE=m
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PLIP is not set
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_BROADCAST=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_RANDOM=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_VXLAN=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_VETH=m
+CONFIG_ATARILANCE=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
-CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=m
+CONFIG_KEYBOARD_ATARI=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_MOUSE_PS2 is not set
+CONFIG_MOUSE_ATARI=m
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_M68K_BEEP=m
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
 CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
+# CONFIG_HW_RANDOM is not set
+CONFIG_NTP_PPS=y
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PTP_1588_CLOCK=m
+# CONFIG_HWMON is not set
 CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
+CONFIG_FB_ATARI=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
+CONFIG_LOGO=y
 CONFIG_SOUND=m
 CONFIG_DMASOUND_ATARI=m
-CONFIG_DMASOUND=m
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# Character devices
-#
-CONFIG_ATARI_MFPSER=m
-CONFIG_ATARI_SCC=y
-CONFIG_ATARI_SCC_DMA=y
-CONFIG_ATARI_MIDI=m
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+CONFIG_UHID=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_GENERIC=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_HEARTBEAT=y
+CONFIG_PROC_HARDWARE=y
+CONFIG_NATFEAT=y
+CONFIG_NFBLOCK=y
+CONFIG_NFCON=y
+CONFIG_NFETH=y
 CONFIG_ATARI_DSP56K=m
-# CONFIG_SERIAL_CONSOLE is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
+CONFIG_EXT4_FS=y
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-CONFIG_REISERFS_PROC_INFO=y
-# CONFIG_REISERFS_FS_XATTR is not set
 CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
-# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FANOTIFY=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 CONFIG_AUTOFS4_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
+CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_ECRYPT_FS_MESSAGING=y
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_LZO=y
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
 CONFIG_HPFS_FS=m
-# CONFIG_QNX4FS_FS is not set
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=m
+CONFIG_NFS_SWAP=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_DEBUG is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_ATARI_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -847,69 +437,66 @@ CONFIG_NLS_ISO8859_14=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
+CONFIG_DLM=m
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
+CONFIG_ASYNC_RAID6_TEST=m
+CONFIG_TEST_STRING_HELPERS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_LZ4=m
+CONFIG_CRYPTO_LZ4HC=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_TEST=m
diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig
index da2a23a2146..0daa8a172f3 100644
--- a/arch/m68k/configs/bvme6000_defconfig
+++ b/arch/m68k/configs/bvme6000_defconfig
@@ -1,751 +1,381 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:37 2005
-#
-CONFIG_M68K=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-bvme6000"
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Platform dependent setup
-#
-# CONFIG_SUN3 is not set
-# CONFIG_AMIGA is not set
-# CONFIG_ATARI is not set
-# CONFIG_MAC is not set
-# CONFIG_APOLLO is not set
-CONFIG_VME=y
-# CONFIG_MVME147 is not set
-# CONFIG_MVME16x is not set
-CONFIG_BVME6000=y
-# CONFIG_HP300 is not set
-# CONFIG_SUN3X is not set
-# CONFIG_Q40 is not set
-
-#
-# Processor type
-#
-# CONFIG_M68020 is not set
-# CONFIG_M68030 is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_ATARI_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_SUN_PARTITION=y
+# CONFIG_EFI_PARTITION is not set
+CONFIG_IOSCHED_DEADLINE=m
+CONFIG_KEXEC=y
+CONFIG_BOOTINFO_PROC=y
 CONFIG_M68040=y
 CONFIG_M68060=y
-CONFIG_MMU_MOTOROLA=y
-# CONFIG_M68KFPU_EMU is not set
-# CONFIG_ADVANCED is not set
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
+CONFIG_VME=y
+CONFIG_BVME6000=y
+# CONFIG_COMPACTION is not set
+CONFIG_CLEANCACHE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-CONFIG_PROC_HARDWARE=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
+CONFIG_PACKET_DIAG=m
 CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
 CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+CONFIG_NET_IPVTI=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_VTI=m
+CONFIG_IPV6_GRE=m
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_TABLES=m
+CONFIG_NF_TABLES_INET=m
+CONFIG_NFT_EXTHDR=m
+CONFIG_NFT_META=m
+CONFIG_NFT_CT=m
+CONFIG_NFT_RBTREE=m
+CONFIG_NFT_HASH=m
+CONFIG_NFT_COUNTER=m
+CONFIG_NFT_LOG=m
+CONFIG_NFT_LIMIT=m
+CONFIG_NFT_NAT=m
+CONFIG_NFT_QUEUE=m
+CONFIG_NFT_REJECT=m
+CONFIG_NFT_COMPAT=m
+CONFIG_NETFILTER_XT_SET=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NETPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETNET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NFT_CHAIN_NAT_IPV4=m
+CONFIG_NF_TABLES_ARP=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT_IPV4=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_IP6_NF_QUEUE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_CHAIN_NAT_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_SYNPROXY=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
+CONFIG_NF_NAT_IPV6=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
+CONFIG_NF_TABLES_BRIDGE=m
+CONFIG_IP_DCCP=m
+# CONFIG_IP_DCCP_CCID3 is not set
+CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_RDS=m
+CONFIG_RDS_TCP=m
+CONFIG_L2TP=m
 CONFIG_ATALK=m
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_DAT=y
+CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
+CONFIG_NETLINK_DIAG=m
+CONFIG_NET_MPLS_GSO=m
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_FW_LOADER_USER_HELPER is not set
+CONFIG_CONNECTOR=m
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_ATA_OVER_ETH=m
+CONFIG_DUMMY_IRQ=m
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=m
+CONFIG_BVME6000_SCSI=y
+CONFIG_MD=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_RAID=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_UEVENT=y
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
 CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_BROADCAST=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_RANDOM=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_VXLAN=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_VETH=m
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
 CONFIG_BVME6000_NET=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
-CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=m
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_LIBPS2=m
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_GEN_RTC=m
-CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# Character devices
-#
-CONFIG_BVME6000_SCC=y
-CONFIG_SERIAL_CONSOLE=y
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_NTP_PPS=y
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PTP_1588_CLOCK=m
+# CONFIG_HWMON is not set
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+CONFIG_UHID=m
+# CONFIG_HID_GENERIC is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_GENERIC=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_PROC_HARDWARE=y
+CONFIG_EXT4_FS=y
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
 CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
-# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FANOTIFY=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 CONFIG_AUTOFS4_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
+CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_ECRYPT_FS_MESSAGING=y
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_LZO=y
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
 CONFIG_HPFS_FS=m
-# CONFIG_QNX4FS_FS is not set
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFS_V4=m
+CONFIG_NFS_SWAP=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_DEBUG is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -783,69 +413,66 @@ CONFIG_NLS_ISO8859_14=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
+CONFIG_DLM=m
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
+CONFIG_ASYNC_RAID6_TEST=m
+CONFIG_TEST_STRING_HELPERS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=m
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_LZ4=m
+CONFIG_CRYPTO_LZ4HC=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_TEST=m
diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig
index 51251883adf..88af78f7bad 100644
--- a/arch/m68k/configs/hp300_defconfig
+++ b/arch/m68k/configs/hp300_defconfig
@@ -1,751 +1,390 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:41 2005
-#
-CONFIG_M68K=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-hp300"
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Platform dependent setup
-#
-# CONFIG_SUN3 is not set
-# CONFIG_AMIGA is not set
-# CONFIG_ATARI is not set
-# CONFIG_MAC is not set
-# CONFIG_APOLLO is not set
-# CONFIG_VME is not set
-CONFIG_HP300=y
-CONFIG_DIO=y
-# CONFIG_SUN3X is not set
-# CONFIG_Q40 is not set
-
-#
-# Processor type
-#
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_ATARI_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_SUN_PARTITION=y
+# CONFIG_EFI_PARTITION is not set
+CONFIG_SYSV68_PARTITION=y
+CONFIG_IOSCHED_DEADLINE=m
+CONFIG_KEXEC=y
+CONFIG_BOOTINFO_PROC=y
 CONFIG_M68020=y
 CONFIG_M68030=y
 CONFIG_M68040=y
 CONFIG_M68060=y
-CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
-# CONFIG_ADVANCED is not set
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
+CONFIG_HP300=y
+# CONFIG_COMPACTION is not set
+CONFIG_CLEANCACHE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-CONFIG_HEARTBEAT=y
-CONFIG_PROC_HARDWARE=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
+CONFIG_PACKET_DIAG=m
 CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
 CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+CONFIG_NET_IPVTI=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_VTI=m
+CONFIG_IPV6_GRE=m
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_TABLES=m
+CONFIG_NF_TABLES_INET=m
+CONFIG_NFT_EXTHDR=m
+CONFIG_NFT_META=m
+CONFIG_NFT_CT=m
+CONFIG_NFT_RBTREE=m
+CONFIG_NFT_HASH=m
+CONFIG_NFT_COUNTER=m
+CONFIG_NFT_LOG=m
+CONFIG_NFT_LIMIT=m
+CONFIG_NFT_NAT=m
+CONFIG_NFT_QUEUE=m
+CONFIG_NFT_REJECT=m
+CONFIG_NFT_COMPAT=m
+CONFIG_NETFILTER_XT_SET=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NETPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETNET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NFT_CHAIN_NAT_IPV4=m
+CONFIG_NF_TABLES_ARP=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT_IPV4=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_IP6_NF_QUEUE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_CHAIN_NAT_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_SYNPROXY=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+CONFIG_NF_NAT_IPV6=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
+CONFIG_NF_TABLES_BRIDGE=m
+CONFIG_IP_DCCP=m
+# CONFIG_IP_DCCP_CCID3 is not set
+CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_RDS=m
+CONFIG_RDS_TCP=m
+CONFIG_L2TP=m
 CONFIG_ATALK=m
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_DAT=y
+CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
+CONFIG_NETLINK_DIAG=m
+CONFIG_NET_MPLS_GSO=m
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_FW_LOADER_USER_HELPER is not set
+CONFIG_CONNECTOR=m
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_ATA_OVER_ETH=m
+CONFIG_DUMMY_IRQ=m
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=m
+CONFIG_MD=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_RAID=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_UEVENT=y
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
 CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_BROADCAST=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_RANDOM=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_VXLAN=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_VETH=m
 CONFIG_HPLANCE=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
-CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=m
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=m
+# CONFIG_MOUSE_PS2 is not set
 CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=m
+CONFIG_INPUT_MISC=y
+CONFIG_HP_SDC_RTC=m
 CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_LIBPS2=m
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# Character devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_NTP_PPS=y
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PTP_1588_CLOCK=m
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+CONFIG_UHID=m
+# CONFIG_HID_GENERIC is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_GENERIC=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_PROC_HARDWARE=y
+CONFIG_EXT4_FS=y
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
 CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
-# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FANOTIFY=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 CONFIG_AUTOFS4_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
+CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_ECRYPT_FS_MESSAGING=y
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_LZO=y
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
 CONFIG_HPFS_FS=m
-# CONFIG_QNX4FS_FS is not set
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFS_V4=m
+CONFIG_NFS_SWAP=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_DEBUG is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -783,69 +422,66 @@ CONFIG_NLS_ISO8859_14=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
+CONFIG_DLM=m
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
+CONFIG_ASYNC_RAID6_TEST=m
+CONFIG_TEST_STRING_HELPERS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_LZ4=m
+CONFIG_CRYPTO_LZ4HC=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_TEST=m
diff --git a/arch/m68k/configs/m5208evb_defconfig b/arch/m68k/configs/m5208evb_defconfig
new file mode 100644
index 00000000000..e7292f460af
--- /dev/null
+++ b/arch/m68k/configs/m5208evb_defconfig
@@ -0,0 +1,75 @@
+# CONFIG_MMU is not set
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_M520x=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=166666666
+CONFIG_CLOCK_DIV=2
+CONFIG_M5208EVB=y
+# CONFIG_4KSTACKS is not set
+CONFIG_RAMBASE=0x40000000
+CONFIG_RAMSIZE=0x2000000
+CONFIG_VECTORBASE=0x40000000
+CONFIG_KERNELBASE=0x40020000
+CONFIG_RAM16BIT=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_UCLINUX=y
+CONFIG_BLK_DEV_RAM=y
+# CONFIG_MISC_DEVICES is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_FEC=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=115200
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_SYSFS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_FULLDEBUG=y
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
diff --git a/arch/m68k/configs/m5249evb_defconfig b/arch/m68k/configs/m5249evb_defconfig
new file mode 100644
index 00000000000..0cd4b39f325
--- /dev/null
+++ b/arch/m68k/configs/m5249evb_defconfig
@@ -0,0 +1,68 @@
+# CONFIG_MMU is not set
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_M5249=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=140000000
+CONFIG_CLOCK_DIV=2
+CONFIG_M5249C3=y
+CONFIG_RAMBASE=0x00000000
+CONFIG_RAMSIZE=0x00800000
+CONFIG_VECTORBASE=0x00000000
+CONFIG_KERNELBASE=0x00020000
+CONFIG_BINFMT_FLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_UCLINUX=y
+CONFIG_BLK_DEV_RAM=y
+# CONFIG_MISC_DEVICES is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_PPP=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+# CONFIG_FILE_LOCKING is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
+# CONFIG_CRC32 is not set
diff --git a/arch/m68k/configs/m5272c3_defconfig b/arch/m68k/configs/m5272c3_defconfig
new file mode 100644
index 00000000000..a60cb350913
--- /dev/null
+++ b/arch/m68k/configs/m5272c3_defconfig
@@ -0,0 +1,66 @@
+# CONFIG_MMU is not set
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_M5272=y
+CONFIG_CLOCK_SET=y
+CONFIG_M5272C3=y
+CONFIG_RAMBASE=0x00000000
+CONFIG_RAMSIZE=0x00800000
+CONFIG_VECTORBASE=0x00000000
+CONFIG_KERNELBASE=0x00020000
+CONFIG_BINFMT_FLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_UCLINUX=y
+CONFIG_BLK_DEV_RAM=y
+# CONFIG_MISC_DEVICES is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_FEC=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
diff --git a/arch/m68k/configs/m5275evb_defconfig b/arch/m68k/configs/m5275evb_defconfig
new file mode 100644
index 00000000000..e6502ab7cb2
--- /dev/null
+++ b/arch/m68k/configs/m5275evb_defconfig
@@ -0,0 +1,72 @@
+# CONFIG_MMU is not set
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_M5275=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=150000000
+CONFIG_CLOCK_DIV=2
+CONFIG_M5275EVB=y
+# CONFIG_4KSTACKS is not set
+CONFIG_RAMBASE=0x00000000
+CONFIG_RAMSIZE=0x00000000
+CONFIG_VECTORBASE=0x00000000
+CONFIG_KERNELBASE=0x00020000
+CONFIG_BINFMT_FLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_UCLINUX=y
+CONFIG_BLK_DEV_RAM=y
+# CONFIG_MISC_DEVICES is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_FEC=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_PPP=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
+# CONFIG_CRC32 is not set
diff --git a/arch/m68k/configs/m5307c3_defconfig b/arch/m68k/configs/m5307c3_defconfig
new file mode 100644
index 00000000000..023812abd2e
--- /dev/null
+++ b/arch/m68k/configs/m5307c3_defconfig
@@ -0,0 +1,76 @@
+# CONFIG_MMU is not set
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_M5307=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=90000000
+CONFIG_CLOCK_DIV=2
+CONFIG_M5307C3=y
+CONFIG_RAMBASE=0x00000000
+CONFIG_RAMSIZE=0x00800000
+CONFIG_VECTORBASE=0x00000000
+CONFIG_KERNELBASE=0x00020000
+CONFIG_BINFMT_FLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_UCLINUX=y
+CONFIG_BLK_DEV_RAM=y
+# CONFIG_MISC_DEVICES is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_PPP=y
+CONFIG_SLIP=y
+CONFIG_SLIP_COMPRESSED=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_FULLDEBUG=y
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
+# CONFIG_CRC32 is not set
diff --git a/arch/m68k/configs/m5407c3_defconfig b/arch/m68k/configs/m5407c3_defconfig
new file mode 100644
index 00000000000..557b39f3be9
--- /dev/null
+++ b/arch/m68k/configs/m5407c3_defconfig
@@ -0,0 +1,70 @@
+# CONFIG_MMU is not set
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_M5407=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=50000000
+CONFIG_M5407C3=y
+CONFIG_RAMBASE=0x00000000
+CONFIG_RAMSIZE=0x00000000
+CONFIG_VECTORBASE=0x00000000
+CONFIG_KERNELBASE=0x00020000
+CONFIG_BINFMT_FLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_UCLINUX=y
+CONFIG_BLK_DEV_RAM=y
+# CONFIG_MISC_DEVICES is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_PPP=y
+# CONFIG_INPUT is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
+# CONFIG_CRC32 is not set
diff --git a/arch/m68k/configs/m5475evb_defconfig b/arch/m68k/configs/m5475evb_defconfig
new file mode 100644
index 00000000000..c5018a68819
--- /dev/null
+++ b/arch/m68k/configs/m5475evb_defconfig
@@ -0,0 +1,62 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_SWAP is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_SHMEM is not set
+# CONFIG_AIO is not set
+CONFIG_EMBEDDED=y
+CONFIG_MODULES=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_COLDFIRE=y
+CONFIG_M547x=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=266000000
+# CONFIG_4KSTACKS is not set
+CONFIG_RAMBASE=0x0
+CONFIG_RAMSIZE=0x2000000
+CONFIG_VECTORBASE=0x0
+CONFIG_MBAR=0xff000000
+CONFIG_KERNELBASE=0x20000
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_UCLINUX=y
+CONFIG_BLK_DEV_RAM=y
+# CONFIG_INPUT is not set
+# CONFIG_VT is not set
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig
index 15b80abfe94..66f915574a8 100644
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@@ -1,837 +1,412 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:45 2005
-#
-CONFIG_M68K=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-mac"
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Platform dependent setup
-#
-# CONFIG_SUN3 is not set
-# CONFIG_AMIGA is not set
-# CONFIG_ATARI is not set
-CONFIG_MAC=y
-CONFIG_NUBUS=y
-CONFIG_M68K_L2_CACHE=y
-# CONFIG_APOLLO is not set
-# CONFIG_VME is not set
-# CONFIG_HP300 is not set
-# CONFIG_SUN3X is not set
-# CONFIG_Q40 is not set
-
-#
-# Processor type
-#
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_ATARI_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_SUN_PARTITION=y
+# CONFIG_EFI_PARTITION is not set
+CONFIG_SYSV68_PARTITION=y
+CONFIG_IOSCHED_DEADLINE=m
+CONFIG_KEXEC=y
+CONFIG_BOOTINFO_PROC=y
 CONFIG_M68020=y
 CONFIG_M68030=y
 CONFIG_M68040=y
-# CONFIG_M68060 is not set
-CONFIG_MMU_MOTOROLA=y
 CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
-# CONFIG_ADVANCED is not set
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
+CONFIG_MAC=y
+# CONFIG_COMPACTION is not set
+CONFIG_CLEANCACHE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-# CONFIG_HEARTBEAT is not set
-CONFIG_PROC_HARDWARE=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEFLOPPY=m
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_MAC_IDE=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-CONFIG_MAC_SCSI=y
-CONFIG_SCSI_MAC_ESP=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Macintosh device drivers
-#
-CONFIG_ADB=y
-CONFIG_ADB_MACII=y
-CONFIG_ADB_MACIISI=y
-CONFIG_ADB_IOP=y
-CONFIG_ADB_PMU68K=y
-CONFIG_ADB_CUDA=y
-CONFIG_INPUT_ADBHID=y
-CONFIG_MAC_EMUMOUSEBTN=y
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
+CONFIG_PACKET_DIAG=m
 CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
 CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
 CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+CONFIG_NET_IPVTI=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_VTI=m
+CONFIG_IPV6_GRE=m
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_TABLES=m
+CONFIG_NF_TABLES_INET=m
+CONFIG_NFT_EXTHDR=m
+CONFIG_NFT_META=m
+CONFIG_NFT_CT=m
+CONFIG_NFT_RBTREE=m
+CONFIG_NFT_HASH=m
+CONFIG_NFT_COUNTER=m
+CONFIG_NFT_LOG=m
+CONFIG_NFT_LIMIT=m
+CONFIG_NFT_NAT=m
+CONFIG_NFT_QUEUE=m
+CONFIG_NFT_REJECT=m
+CONFIG_NFT_COMPAT=m
+CONFIG_NETFILTER_XT_SET=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NETPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETNET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NFT_CHAIN_NAT_IPV4=m
+CONFIG_NF_TABLES_ARP=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT_IPV4=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_IP6_NF_QUEUE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_CHAIN_NAT_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_SYNPROXY=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+CONFIG_NF_NAT_IPV6=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
+CONFIG_NF_TABLES_BRIDGE=m
+CONFIG_IP_DCCP=m
+# CONFIG_IP_DCCP_CCID3 is not set
+CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_RDS=m
+CONFIG_RDS_TCP=m
+CONFIG_L2TP=m
 CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
+CONFIG_DEV_APPLETALK=m
 CONFIG_IPDDP=m
 CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_DAT=y
+CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
+CONFIG_NETLINK_DIAG=m
+CONFIG_NET_MPLS_GSO=m
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_FW_LOADER_USER_HELPER is not set
+CONFIG_CONNECTOR=m
+CONFIG_BLK_DEV_SWIM=m
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_ATA_OVER_ETH=m
+CONFIG_DUMMY_IRQ=m
+CONFIG_IDE=y
+CONFIG_IDE_GD_ATAPI=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_MAC_IDE=y
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=m
+CONFIG_MAC_SCSI=y
+CONFIG_SCSI_MAC_ESP=y
+CONFIG_MD=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_RAID=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_UEVENT=y
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+CONFIG_ADB=y
+CONFIG_ADB_MACII=y
+CONFIG_ADB_IOP=y
+CONFIG_ADB_PMU68K=y
+CONFIG_ADB_CUDA=y
+CONFIG_INPUT_ADBHID=y
+CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
 CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-CONFIG_MAC8390=y
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_BROADCAST=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_RANDOM=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_VXLAN=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_VETH=m
+CONFIG_MACMACE=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
 CONFIG_MAC89x0=y
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
 CONFIG_MACSONIC=y
-CONFIG_MACMACE=y
-# CONFIG_NET_VENDOR_SMC is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
+CONFIG_MAC8390=y
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-CONFIG_PPP_FILTER=y
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
-CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=m
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=m
+# CONFIG_MOUSE_PS2 is not set
 CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_M68K_BEEP=m
 CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_LIBPS2=m
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_GEN_RTC=m
-CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_PMACZILOG=y
+CONFIG_SERIAL_PMACZILOG_TTYS=y
+CONFIG_SERIAL_PMACZILOG_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_NTP_PPS=y
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PTP_1588_CLOCK=m
+# CONFIG_HWMON is not set
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-CONFIG_FB_MACMODES=y
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_VALKYRIE=y
 CONFIG_FB_MAC=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_FONT_6x11=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_LOGO_MAC_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# Character devices
-#
-CONFIG_MAC_SCC=y
-CONFIG_MAC_HID=y
-CONFIG_MAC_ADBKEYCODES=y
-CONFIG_SERIAL_CONSOLE=y
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+CONFIG_UHID=m
+# CONFIG_HID_GENERIC is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_GENERIC=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_PROC_HARDWARE=y
+CONFIG_EXT4_FS=y
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
 CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
-# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FANOTIFY=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 CONFIG_AUTOFS4_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
+CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=y
-CONFIG_HFSPLUS_FS=y
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
+CONFIG_ECRYPT_FS=m
+CONFIG_ECRYPT_FS_MESSAGING=y
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_LZO=y
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
 CONFIG_HPFS_FS=m
-# CONFIG_QNX4FS_FS is not set
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=m
+CONFIG_NFS_SWAP=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_DEBUG is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-CONFIG_AMIGA_PARTITION=y
-CONFIG_ATARI_PARTITION=y
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-CONFIG_LDM_DEBUG=y
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-CONFIG_SUN_PARTITION=y
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -869,69 +444,67 @@ CONFIG_NLS_ISO8859_14=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
+CONFIG_DLM=m
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
+CONFIG_ASYNC_RAID6_TEST=m
+CONFIG_TEST_STRING_HELPERS=m
+CONFIG_EARLY_PRINTK=y
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_LZ4=m
+CONFIG_CRYPTO_LZ4HC=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_TEST=m
diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig
new file mode 100644
index 00000000000..5eaa49924fa
--- /dev/null
+++ b/arch/m68k/configs/multi_defconfig
@@ -0,0 +1,586 @@
+CONFIG_LOCALVERSION="-multi"
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_EFI_PARTITION is not set
+CONFIG_IOSCHED_DEADLINE=m
+CONFIG_KEXEC=y
+CONFIG_BOOTINFO_PROC=y
+CONFIG_M68020=y
+CONFIG_M68040=y
+CONFIG_M68060=y
+CONFIG_M68KFPU_EMU=y
+CONFIG_AMIGA=y
+CONFIG_ATARI=y
+CONFIG_MAC=y
+CONFIG_APOLLO=y
+CONFIG_VME=y
+CONFIG_MVME147=y
+CONFIG_MVME16x=y
+CONFIG_BVME6000=y
+CONFIG_HP300=y
+CONFIG_SUN3X=y
+CONFIG_Q40=y
+CONFIG_ZORRO=y
+CONFIG_AMIGA_PCMCIA=y
+CONFIG_ZORRO_NAMES=y
+# CONFIG_COMPACTION is not set
+CONFIG_CLEANCACHE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=m
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM_MIGRATE=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPVTI=m
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_VTI=m
+CONFIG_IPV6_GRE=m
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_TABLES=m
+CONFIG_NF_TABLES_INET=m
+CONFIG_NFT_EXTHDR=m
+CONFIG_NFT_META=m
+CONFIG_NFT_CT=m
+CONFIG_NFT_RBTREE=m
+CONFIG_NFT_HASH=m
+CONFIG_NFT_COUNTER=m
+CONFIG_NFT_LOG=m
+CONFIG_NFT_LIMIT=m
+CONFIG_NFT_NAT=m
+CONFIG_NFT_QUEUE=m
+CONFIG_NFT_REJECT=m
+CONFIG_NFT_COMPAT=m
+CONFIG_NETFILTER_XT_SET=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NETPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETNET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NFT_CHAIN_NAT_IPV4=m
+CONFIG_NF_TABLES_ARP=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_SYNPROXY=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT_IPV4=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_CHAIN_NAT_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_SYNPROXY=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_NF_NAT_IPV6=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
+CONFIG_NF_TABLES_BRIDGE=m
+CONFIG_IP_DCCP=m
+# CONFIG_IP_DCCP_CCID3 is not set
+CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_RDS=m
+CONFIG_RDS_TCP=m
+CONFIG_L2TP=m
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_DAT=y
+CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
+CONFIG_NETLINK_DIAG=m
+CONFIG_NET_MPLS_GSO=m
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_FW_LOADER_USER_HELPER is not set
+CONFIG_CONNECTOR=m
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_AMIGA=m
+CONFIG_PARPORT_MFC3=m
+CONFIG_PARPORT_ATARI=m
+CONFIG_PARPORT_1284=y
+CONFIG_AMIGA_FLOPPY=y
+CONFIG_ATARI_FLOPPY=y
+CONFIG_BLK_DEV_SWIM=m
+CONFIG_AMIGA_Z2RAM=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_ATA_OVER_ETH=m
+CONFIG_DUMMY_IRQ=m
+CONFIG_IDE=y
+CONFIG_IDE_GD_ATAPI=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_GAYLE=y
+CONFIG_BLK_DEV_BUDDHA=y
+CONFIG_BLK_DEV_FALCON_IDE=y
+CONFIG_BLK_DEV_MAC_IDE=y
+CONFIG_BLK_DEV_Q40IDE=y
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=m
+CONFIG_A3000_SCSI=y
+CONFIG_A2091_SCSI=y
+CONFIG_GVP11_SCSI=y
+CONFIG_SCSI_A4000T=y
+CONFIG_SCSI_ZORRO7XX=y
+CONFIG_ATARI_SCSI=y
+CONFIG_MAC_SCSI=y
+CONFIG_SCSI_MAC_ESP=y
+CONFIG_MVME147_SCSI=y
+CONFIG_MVME16x_SCSI=y
+CONFIG_BVME6000_SCSI=y
+CONFIG_SUN3X_ESP=y
+CONFIG_MD=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_RAID=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_UEVENT=y
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+CONFIG_ADB=y
+CONFIG_ADB_MACII=y
+CONFIG_ADB_IOP=y
+CONFIG_ADB_PMU68K=y
+CONFIG_ADB_CUDA=y
+CONFIG_INPUT_ADBHID=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_BROADCAST=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_RANDOM=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_VXLAN=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_VETH=m
+# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_A2065=y
+CONFIG_ARIADNE=y
+CONFIG_ATARILANCE=y
+CONFIG_HPLANCE=y
+CONFIG_MVME147_NET=y
+CONFIG_SUN3LANCE=y
+CONFIG_MACMACE=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+CONFIG_MAC89x0=y
+# CONFIG_NET_VENDOR_HP is not set
+CONFIG_BVME6000_NET=y
+CONFIG_MVME16x_NET=y
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+CONFIG_MACSONIC=y
+CONFIG_HYDRA=y
+CONFIG_MAC8390=y
+CONFIG_NE2000=m
+CONFIG_APNE=y
+CONFIG_ZORRO8390=y
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=m
+CONFIG_KEYBOARD_AMIGA=y
+CONFIG_KEYBOARD_ATARI=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_SUNKBD=y
+# CONFIG_MOUSE_PS2 is not set
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_AMIGA=m
+CONFIG_MOUSE_ATARI=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_AMIGA=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_M68K_BEEP=m
+CONFIG_HP_SDC_RTC=m
+CONFIG_SERIO_Q40KBD=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_PMACZILOG=y
+CONFIG_SERIAL_PMACZILOG_TTYS=y
+CONFIG_SERIAL_PMACZILOG_CONSOLE=y
+CONFIG_PRINTER=m
+# CONFIG_HW_RANDOM is not set
+CONFIG_NTP_PPS=y
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PTP_1588_CLOCK=m
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+CONFIG_FB_AMIGA=y
+CONFIG_FB_AMIGA_OCS=y
+CONFIG_FB_AMIGA_ECS=y
+CONFIG_FB_AMIGA_AGA=y
+CONFIG_FB_FM2=y
+CONFIG_FB_ATARI=y
+CONFIG_FB_VALKYRIE=y
+CONFIG_FB_MAC=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+CONFIG_SOUND=m
+CONFIG_DMASOUND_ATARI=m
+CONFIG_DMASOUND_PAULA=m
+CONFIG_DMASOUND_Q40=m
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+CONFIG_UHID=m
+# CONFIG_HID_GENERIC is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_MSM6242=m
+CONFIG_RTC_DRV_RP5C01=m
+CONFIG_RTC_DRV_GENERIC=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_HEARTBEAT=y
+CONFIG_PROC_HARDWARE=y
+CONFIG_NATFEAT=y
+CONFIG_NFBLOCK=y
+CONFIG_NFCON=y
+CONFIG_NFETH=y
+CONFIG_ATARI_DSP56K=m
+CONFIG_AMIGA_BUILTIN_SERIAL=y
+CONFIG_SERIAL_CONSOLE=y
+CONFIG_EXT4_FS=y
+CONFIG_REISERFS_FS=m
+CONFIG_JFS_FS=m
+CONFIG_XFS_FS=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FANOTIFY=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_ECRYPT_FS_MESSAGING=y
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_LZO=y
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=m
+CONFIG_NFS_SWAP=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+CONFIG_CIFS=m
+# CONFIG_CIFS_DEBUG is not set
+CONFIG_CODA_FS=m
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
+CONFIG_DLM=m
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_ASYNC_RAID6_TEST=m
+CONFIG_TEST_STRING_HELPERS=m
+CONFIG_EARLY_PRINTK=y
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_LZ4=m
+CONFIG_CRYPTO_LZ4HC=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_TEST=m
diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig
index f0d5534f683..324d0b4d835 100644
--- a/arch/m68k/configs/mvme147_defconfig
+++ b/arch/m68k/configs/mvme147_defconfig
@@ -1,777 +1,381 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:50 2005
-#
-CONFIG_M68K=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-mvme147"
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Platform dependent setup
-#
-# CONFIG_SUN3 is not set
-# CONFIG_AMIGA is not set
-# CONFIG_ATARI is not set
-# CONFIG_MAC is not set
-# CONFIG_APOLLO is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_ATARI_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_SUN_PARTITION=y
+# CONFIG_EFI_PARTITION is not set
+CONFIG_IOSCHED_DEADLINE=m
+CONFIG_KEXEC=y
+CONFIG_BOOTINFO_PROC=y
+CONFIG_M68030=y
 CONFIG_VME=y
 CONFIG_MVME147=y
-# CONFIG_MVME16x is not set
-# CONFIG_BVME6000 is not set
-# CONFIG_HP300 is not set
-# CONFIG_SUN3X is not set
-# CONFIG_Q40 is not set
-
-#
-# Processor type
-#
-# CONFIG_M68020 is not set
-CONFIG_M68030=y
-# CONFIG_M68040 is not set
-# CONFIG_M68060 is not set
-CONFIG_MMU_MOTOROLA=y
-# CONFIG_M68KFPU_EMU is not set
-# CONFIG_ADVANCED is not set
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
+# CONFIG_COMPACTION is not set
+CONFIG_CLEANCACHE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-CONFIG_PROC_HARDWARE=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-CONFIG_MVME147_SCSI=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
+CONFIG_PACKET_DIAG=m
 CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
 CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+CONFIG_NET_IPVTI=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_VTI=m
+CONFIG_IPV6_GRE=m
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_TABLES=m
+CONFIG_NF_TABLES_INET=m
+CONFIG_NFT_EXTHDR=m
+CONFIG_NFT_META=m
+CONFIG_NFT_CT=m
+CONFIG_NFT_RBTREE=m
+CONFIG_NFT_HASH=m
+CONFIG_NFT_COUNTER=m
+CONFIG_NFT_LOG=m
+CONFIG_NFT_LIMIT=m
+CONFIG_NFT_NAT=m
+CONFIG_NFT_QUEUE=m
+CONFIG_NFT_REJECT=m
+CONFIG_NFT_COMPAT=m
+CONFIG_NETFILTER_XT_SET=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NETPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETNET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NFT_CHAIN_NAT_IPV4=m
+CONFIG_NF_TABLES_ARP=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT_IPV4=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_IP6_NF_QUEUE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_CHAIN_NAT_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_SYNPROXY=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+CONFIG_NF_NAT_IPV6=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
+CONFIG_NF_TABLES_BRIDGE=m
+CONFIG_IP_DCCP=m
+# CONFIG_IP_DCCP_CCID3 is not set
+CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_RDS=m
+CONFIG_RDS_TCP=m
+CONFIG_L2TP=m
 CONFIG_ATALK=m
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_DAT=y
+CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
+CONFIG_NETLINK_DIAG=m
+CONFIG_NET_MPLS_GSO=m
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_FW_LOADER_USER_HELPER is not set
+CONFIG_CONNECTOR=m
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_ATA_OVER_ETH=m
+CONFIG_DUMMY_IRQ=m
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=m
+CONFIG_MVME147_SCSI=y
+CONFIG_MD=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_RAID=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_UEVENT=y
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
 CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_BROADCAST=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_RANDOM=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_VXLAN=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_VETH=m
 CONFIG_MVME147_NET=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
-CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=m
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_LIBPS2=m
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_GEN_RTC=m
-CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# Character devices
-#
-CONFIG_MVME147_SCC=y
-CONFIG_SERIAL_CONSOLE=y
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_NTP_PPS=y
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PTP_1588_CLOCK=m
+# CONFIG_HWMON is not set
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+CONFIG_UHID=m
+# CONFIG_HID_GENERIC is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_GENERIC=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_PROC_HARDWARE=y
+CONFIG_EXT4_FS=y
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
 CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
-# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FANOTIFY=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 CONFIG_AUTOFS4_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
+CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_ECRYPT_FS_MESSAGING=y
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_LZO=y
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
 CONFIG_HPFS_FS=m
-# CONFIG_QNX4FS_FS is not set
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFS_V4=m
+CONFIG_NFS_SWAP=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_DEBUG is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -809,69 +413,66 @@ CONFIG_NLS_ISO8859_14=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
+CONFIG_DLM=m
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
+CONFIG_ASYNC_RAID6_TEST=m
+CONFIG_TEST_STRING_HELPERS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_LZ4=m
+CONFIG_CRYPTO_LZ4HC=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_TEST=m
diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index 1d5c46ff3c8..f0cb4338952 100644
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -1,776 +1,381 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:53 2005
-#
-CONFIG_M68K=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-mvme16x"
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Platform dependent setup
-#
-# CONFIG_SUN3 is not set
-# CONFIG_AMIGA is not set
-# CONFIG_ATARI is not set
-# CONFIG_MAC is not set
-# CONFIG_APOLLO is not set
-CONFIG_VME=y
-# CONFIG_MVME147 is not set
-CONFIG_MVME16x=y
-# CONFIG_BVME6000 is not set
-# CONFIG_HP300 is not set
-# CONFIG_SUN3X is not set
-# CONFIG_Q40 is not set
-
-#
-# Processor type
-#
-# CONFIG_M68020 is not set
-# CONFIG_M68030 is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_ATARI_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_SUN_PARTITION=y
+# CONFIG_EFI_PARTITION is not set
+CONFIG_IOSCHED_DEADLINE=m
+CONFIG_KEXEC=y
+CONFIG_BOOTINFO_PROC=y
 CONFIG_M68040=y
 CONFIG_M68060=y
-CONFIG_MMU_MOTOROLA=y
-# CONFIG_M68KFPU_EMU is not set
-# CONFIG_ADVANCED is not set
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
+CONFIG_VME=y
+CONFIG_MVME16x=y
+# CONFIG_COMPACTION is not set
+CONFIG_CLEANCACHE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-CONFIG_PROC_HARDWARE=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
+CONFIG_PACKET_DIAG=m
 CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
 CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+CONFIG_NET_IPVTI=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_VTI=m
+CONFIG_IPV6_GRE=m
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_TABLES=m
+CONFIG_NF_TABLES_INET=m
+CONFIG_NFT_EXTHDR=m
+CONFIG_NFT_META=m
+CONFIG_NFT_CT=m
+CONFIG_NFT_RBTREE=m
+CONFIG_NFT_HASH=m
+CONFIG_NFT_COUNTER=m
+CONFIG_NFT_LOG=m
+CONFIG_NFT_LIMIT=m
+CONFIG_NFT_NAT=m
+CONFIG_NFT_QUEUE=m
+CONFIG_NFT_REJECT=m
+CONFIG_NFT_COMPAT=m
+CONFIG_NETFILTER_XT_SET=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NETPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETNET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NFT_CHAIN_NAT_IPV4=m
+CONFIG_NF_TABLES_ARP=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT_IPV4=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_IP6_NF_QUEUE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_CHAIN_NAT_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_SYNPROXY=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+CONFIG_NF_NAT_IPV6=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
+CONFIG_NF_TABLES_BRIDGE=m
+CONFIG_IP_DCCP=m
+# CONFIG_IP_DCCP_CCID3 is not set
+CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_RDS=m
+CONFIG_RDS_TCP=m
+CONFIG_L2TP=m
 CONFIG_ATALK=m
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_DAT=y
+CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
+CONFIG_NETLINK_DIAG=m
+CONFIG_NET_MPLS_GSO=m
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_FW_LOADER_USER_HELPER is not set
+CONFIG_CONNECTOR=m
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_ATA_OVER_ETH=m
+CONFIG_DUMMY_IRQ=m
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=m
+CONFIG_MVME16x_SCSI=y
+CONFIG_MD=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_RAID=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_UEVENT=y
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
 CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_BROADCAST=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_RANDOM=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_VXLAN=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_VETH=m
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
 CONFIG_MVME16x_NET=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
-CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=m
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_LIBPS2=m
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_GEN_RTC=m
-CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# Character devices
-#
-CONFIG_MVME162_SCC=y
-CONFIG_SERIAL_CONSOLE=y
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_NTP_PPS=y
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PTP_1588_CLOCK=m
+# CONFIG_HWMON is not set
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+CONFIG_UHID=m
+# CONFIG_HID_GENERIC is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_GENERIC=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_PROC_HARDWARE=y
+CONFIG_EXT4_FS=y
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
 CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
-# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FANOTIFY=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 CONFIG_AUTOFS4_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
+CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_ECRYPT_FS_MESSAGING=y
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_LZO=y
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
 CONFIG_HPFS_FS=m
-# CONFIG_QNX4FS_FS is not set
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFS_V4=m
+CONFIG_NFS_SWAP=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_DEBUG is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -808,69 +413,67 @@ CONFIG_NLS_ISO8859_14=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
+CONFIG_DLM=m
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
+CONFIG_ASYNC_RAID6_TEST=m
+CONFIG_TEST_STRING_HELPERS=m
+CONFIG_EARLY_PRINTK=y
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_LZ4=m
+CONFIG_CRYPTO_LZ4HC=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_TEST=m
diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig
index 856238634d4..d6cf0880c46 100644
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@@ -1,840 +1,403 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:58 2005
-#
-CONFIG_M68K=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-q40"
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Platform dependent setup
-#
-# CONFIG_SUN3 is not set
-# CONFIG_AMIGA is not set
-# CONFIG_ATARI is not set
-# CONFIG_MAC is not set
-# CONFIG_APOLLO is not set
-# CONFIG_VME is not set
-# CONFIG_HP300 is not set
-# CONFIG_SUN3X is not set
-CONFIG_Q40=y
-
-#
-# Processor type
-#
-# CONFIG_M68020 is not set
-# CONFIG_M68030 is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_ATARI_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_SUN_PARTITION=y
+# CONFIG_EFI_PARTITION is not set
+CONFIG_SYSV68_PARTITION=y
+CONFIG_IOSCHED_DEADLINE=m
+CONFIG_KEXEC=y
+CONFIG_BOOTINFO_PROC=y
 CONFIG_M68040=y
 CONFIG_M68060=y
-CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
-# CONFIG_ADVANCED is not set
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
+CONFIG_Q40=y
+# CONFIG_COMPACTION is not set
+CONFIG_CLEANCACHE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-# CONFIG_HEARTBEAT is not set
-CONFIG_PROC_HARDWARE=y
-CONFIG_ISA=y
-CONFIG_GENERIC_ISA_DMA=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEFLOPPY=m
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_Q40IDE=y
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
+CONFIG_PACKET_DIAG=m
 CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
 CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+CONFIG_NET_IPVTI=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_VTI=m
+CONFIG_IPV6_GRE=m
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_TABLES=m
+CONFIG_NF_TABLES_INET=m
+CONFIG_NFT_EXTHDR=m
+CONFIG_NFT_META=m
+CONFIG_NFT_CT=m
+CONFIG_NFT_RBTREE=m
+CONFIG_NFT_HASH=m
+CONFIG_NFT_COUNTER=m
+CONFIG_NFT_LOG=m
+CONFIG_NFT_LIMIT=m
+CONFIG_NFT_NAT=m
+CONFIG_NFT_QUEUE=m
+CONFIG_NFT_REJECT=m
+CONFIG_NFT_COMPAT=m
+CONFIG_NETFILTER_XT_SET=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NETPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETNET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NFT_CHAIN_NAT_IPV4=m
+CONFIG_NF_TABLES_ARP=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT_IPV4=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_IP6_NF_QUEUE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_CHAIN_NAT_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_SYNPROXY=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+CONFIG_NF_NAT_IPV6=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
+CONFIG_NF_TABLES_BRIDGE=m
+CONFIG_IP_DCCP=m
+# CONFIG_IP_DCCP_CCID3 is not set
+CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_RDS=m
+CONFIG_RDS_TCP=m
+CONFIG_L2TP=m
 CONFIG_ATALK=m
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_DAT=y
+CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
+CONFIG_NETLINK_DIAG=m
+CONFIG_NET_MPLS_GSO=m
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_FW_LOADER_USER_HELPER is not set
+CONFIG_CONNECTOR=m
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_1284=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_ATA_OVER_ETH=m
+CONFIG_DUMMY_IRQ=m
+CONFIG_IDE=y
+CONFIG_IDE_GD_ATAPI=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_Q40IDE=y
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=m
+CONFIG_MD=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_RAID=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_UEVENT=y
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
 CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_BROADCAST=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_RANDOM=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_VXLAN=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_VETH=m
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
+# CONFIG_NET_VENDOR_AMD is not set
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_HP is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
 CONFIG_NE2000=m
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_PLIP=m
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
-CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=m
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=m
+# CONFIG_MOUSE_PS2 is not set
 CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_Q40KBD=m
-CONFIG_SERIO_LIBPS2=m
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_GEN_RTC=m
-CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_M68K_BEEP=m
+CONFIG_SERIO_Q40KBD=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_PRINTER=m
+# CONFIG_HW_RANDOM is not set
+CONFIG_NTP_PPS=y
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PTP_1588_CLOCK=m
+# CONFIG_HWMON is not set
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_Q40=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-CONFIG_DMASOUND_Q40=y
-CONFIG_DMASOUND=y
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# Character devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
+CONFIG_SOUND=m
+CONFIG_DMASOUND_Q40=m
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+CONFIG_UHID=m
+# CONFIG_HID_GENERIC is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_GENERIC=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_HEARTBEAT=y
+CONFIG_PROC_HARDWARE=y
+CONFIG_EXT4_FS=y
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
 CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
-# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FANOTIFY=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 CONFIG_AUTOFS4_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
+CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_ECRYPT_FS_MESSAGING=y
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_LZO=y
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
 CONFIG_HPFS_FS=m
-# CONFIG_QNX4FS_FS is not set
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-CONFIG_UFS_FS_WRITE=y
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFS_V4=m
+CONFIG_NFS_SWAP=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_DEBUG is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -872,69 +435,66 @@ CONFIG_NLS_ISO8859_14=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
+CONFIG_DLM=m
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
+CONFIG_ASYNC_RAID6_TEST=m
+CONFIG_TEST_STRING_HELPERS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_LZ4=m
+CONFIG_CRYPTO_LZ4HC=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_TEST=m
diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig
index af903b5c570..f4e88d1c747 100644
--- a/arch/m68k/configs/sun3_defconfig
+++ b/arch/m68k/configs/sun3_defconfig
@@ -1,764 +1,382 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:35:02 2005
-#
-CONFIG_M68K=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-sun3"
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Platform dependent setup
-#
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_ATARI_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_EFI_PARTITION is not set
+CONFIG_SYSV68_PARTITION=y
+CONFIG_IOSCHED_DEADLINE=m
+CONFIG_KEXEC=y
+CONFIG_BOOTINFO_PROC=y
 CONFIG_SUN3=y
-
-#
-# Processor type
-#
-CONFIG_M68020=y
-CONFIG_MMU_SUN3=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
-# CONFIG_ADVANCED is not set
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
+# CONFIG_COMPACTION is not set
+CONFIG_CLEANCACHE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-CONFIG_PROC_HARDWARE=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
+CONFIG_PACKET_DIAG=m
 CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
 CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+CONFIG_NET_IPVTI=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_VTI=m
+CONFIG_IPV6_GRE=m
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_TABLES=m
+CONFIG_NF_TABLES_INET=m
+CONFIG_NFT_EXTHDR=m
+CONFIG_NFT_META=m
+CONFIG_NFT_CT=m
+CONFIG_NFT_RBTREE=m
+CONFIG_NFT_HASH=m
+CONFIG_NFT_COUNTER=m
+CONFIG_NFT_LOG=m
+CONFIG_NFT_LIMIT=m
+CONFIG_NFT_NAT=m
+CONFIG_NFT_QUEUE=m
+CONFIG_NFT_REJECT=m
+CONFIG_NFT_COMPAT=m
+CONFIG_NETFILTER_XT_SET=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NETPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETNET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NFT_CHAIN_NAT_IPV4=m
+CONFIG_NF_TABLES_ARP=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT_IPV4=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_IP6_NF_QUEUE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_CHAIN_NAT_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_SYNPROXY=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+CONFIG_NF_NAT_IPV6=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
+CONFIG_NF_TABLES_BRIDGE=m
+CONFIG_IP_DCCP=m
+# CONFIG_IP_DCCP_CCID3 is not set
+CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_RDS=m
+CONFIG_RDS_TCP=m
+CONFIG_L2TP=m
 CONFIG_ATALK=m
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_DAT=y
+CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
+CONFIG_NETLINK_DIAG=m
+CONFIG_NET_MPLS_GSO=m
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_FW_LOADER_USER_HELPER is not set
+CONFIG_CONNECTOR=m
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_ATA_OVER_ETH=m
+CONFIG_DUMMY_IRQ=m
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=m
+CONFIG_SUN3_SCSI=y
+CONFIG_MD=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_RAID=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_UEVENT=y
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
 CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_BROADCAST=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_RANDOM=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_VXLAN=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_VETH=m
 CONFIG_SUN3LANCE=y
+# CONFIG_NET_VENDOR_ARC is not set
 CONFIG_SUN3_82586=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_SUN is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
-CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=m
 # CONFIG_KEYBOARD_ATKBD is not set
 CONFIG_KEYBOARD_SUNKBD=y
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=m
+# CONFIG_MOUSE_PS2 is not set
 CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_LIBPS2=m
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_NTP_PPS=y
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PTP_1588_CLOCK=m
+# CONFIG_HWMON is not set
 CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# Character devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+CONFIG_UHID=m
+# CONFIG_HID_GENERIC is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_GENERIC=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_PROC_HARDWARE=y
+CONFIG_EXT4_FS=y
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
 CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
-# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FANOTIFY=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 CONFIG_AUTOFS4_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
+CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_ECRYPT_FS_MESSAGING=y
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_LZO=y
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
 CONFIG_HPFS_FS=m
-# CONFIG_QNX4FS_FS is not set
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-CONFIG_UFS_FS_WRITE=y
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFS_V4=m
+CONFIG_NFS_SWAP=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_DEBUG is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_SUN_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -796,69 +414,66 @@ CONFIG_NLS_ISO8859_14=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
+CONFIG_DLM=m
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
+CONFIG_ASYNC_RAID6_TEST=m
+CONFIG_TEST_STRING_HELPERS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_LZ4=m
+CONFIG_CRYPTO_LZ4HC=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_TEST=m
diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig
index 997143b7928..49f4032c1ad 100644
--- a/arch/m68k/configs/sun3x_defconfig
+++ b/arch/m68k/configs/sun3x_defconfig
@@ -1,775 +1,382 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:35:06 2005
-#
-CONFIG_M68K=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-sun3x"
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Platform dependent setup
-#
-# CONFIG_SUN3 is not set
-# CONFIG_AMIGA is not set
-# CONFIG_ATARI is not set
-# CONFIG_MAC is not set
-# CONFIG_APOLLO is not set
-# CONFIG_VME is not set
-# CONFIG_HP300 is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_ATARI_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_EFI_PARTITION is not set
+CONFIG_SYSV68_PARTITION=y
+CONFIG_IOSCHED_DEADLINE=m
+CONFIG_KEXEC=y
+CONFIG_BOOTINFO_PROC=y
 CONFIG_SUN3X=y
-# CONFIG_Q40 is not set
-
-#
-# Processor type
-#
-# CONFIG_M68020 is not set
-CONFIG_M68030=y
-# CONFIG_M68040 is not set
-# CONFIG_M68060 is not set
-CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
-# CONFIG_ADVANCED is not set
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
+# CONFIG_COMPACTION is not set
+CONFIG_CLEANCACHE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-CONFIG_PROC_HARDWARE=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-CONFIG_SUN3X_ESP=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
+CONFIG_PACKET_DIAG=m
 CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
 CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+CONFIG_NET_IPVTI=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_VTI=m
+CONFIG_IPV6_GRE=m
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_TABLES=m
+CONFIG_NF_TABLES_INET=m
+CONFIG_NFT_EXTHDR=m
+CONFIG_NFT_META=m
+CONFIG_NFT_CT=m
+CONFIG_NFT_RBTREE=m
+CONFIG_NFT_HASH=m
+CONFIG_NFT_COUNTER=m
+CONFIG_NFT_LOG=m
+CONFIG_NFT_LIMIT=m
+CONFIG_NFT_NAT=m
+CONFIG_NFT_QUEUE=m
+CONFIG_NFT_REJECT=m
+CONFIG_NFT_COMPAT=m
+CONFIG_NETFILTER_XT_SET=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NETPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETNET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NFT_CHAIN_NAT_IPV4=m
+CONFIG_NF_TABLES_ARP=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT_IPV4=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_IP6_NF_QUEUE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_CHAIN_NAT_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_SYNPROXY=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+CONFIG_NF_NAT_IPV6=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
+CONFIG_NF_TABLES_BRIDGE=m
+CONFIG_IP_DCCP=m
+# CONFIG_IP_DCCP_CCID3 is not set
+CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_RDS=m
+CONFIG_RDS_TCP=m
+CONFIG_L2TP=m
 CONFIG_ATALK=m
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_DAT=y
+CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
+CONFIG_NETLINK_DIAG=m
+CONFIG_NET_MPLS_GSO=m
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_FW_LOADER_USER_HELPER is not set
+CONFIG_CONNECTOR=m
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_ATA_OVER_ETH=m
+CONFIG_DUMMY_IRQ=m
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=m
+CONFIG_SUN3X_ESP=y
+CONFIG_MD=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_RAID=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_UEVENT=y
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
 CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_BROADCAST=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_RANDOM=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_VXLAN=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_VETH=m
 CONFIG_SUN3LANCE=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
-CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=m
 # CONFIG_KEYBOARD_ATKBD is not set
 CONFIG_KEYBOARD_SUNKBD=y
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=m
+# CONFIG_MOUSE_PS2 is not set
 CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_LIBPS2=m
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_NTP_PPS=y
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PTP_1588_CLOCK=m
+# CONFIG_HWMON is not set
 CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# Character devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+CONFIG_UHID=m
+# CONFIG_HID_GENERIC is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_GENERIC=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_PROC_HARDWARE=y
+CONFIG_EXT4_FS=y
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
 CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
-# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FANOTIFY=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 CONFIG_AUTOFS4_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
+CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_ECRYPT_FS_MESSAGING=y
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_LZO=y
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
 CONFIG_HPFS_FS=m
-# CONFIG_QNX4FS_FS is not set
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-CONFIG_UFS_FS_WRITE=y
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFS_V4=m
+CONFIG_NFS_SWAP=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_DEBUG is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_SUN_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -807,69 +414,66 @@ CONFIG_NLS_ISO8859_14=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
+CONFIG_DLM=m
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
+CONFIG_ASYNC_RAID6_TEST=m
+CONFIG_TEST_STRING_HELPERS=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_LZ4=m
+CONFIG_CRYPTO_LZ4HC=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_TEST=m
diff --git a/arch/m68k/defconfig b/arch/m68k/defconfig
deleted file mode 100644
index 7d935e48a9a..00000000000
--- a/arch/m68k/defconfig
+++ /dev/null
@@ -1,657 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:17 2005
-#
-CONFIG_M68K=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Platform dependent setup
-#
-# CONFIG_SUN3 is not set
-CONFIG_AMIGA=y
-# CONFIG_ATARI is not set
-# CONFIG_MAC is not set
-# CONFIG_APOLLO is not set
-# CONFIG_VME is not set
-# CONFIG_HP300 is not set
-# CONFIG_SUN3X is not set
-# CONFIG_Q40 is not set
-
-#
-# Processor type
-#
-CONFIG_M68020=y
-CONFIG_M68030=y
-CONFIG_M68040=y
-# CONFIG_M68060 is not set
-CONFIG_MMU_MOTOROLA=y
-# CONFIG_M68KFPU_EMU is not set
-# CONFIG_ADVANCED is not set
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_ZORRO=y
-# CONFIG_AMIGA_PCMCIA is not set
-# CONFIG_HEARTBEAT is not set
-CONFIG_PROC_HARDWARE=y
-# CONFIG_ZORRO_NAMES is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-CONFIG_AMIGA_FLOPPY=y
-# CONFIG_AMIGA_Z2RAM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-CONFIG_A3000_SCSI=y
-CONFIG_A2091_SCSI=y
-CONFIG_GVP11_SCSI=y
-# CONFIG_CYBERSTORM_SCSI is not set
-# CONFIG_CYBERSTORMII_SCSI is not set
-# CONFIG_BLZ2060_SCSI is not set
-# CONFIG_BLZ1230_SCSI is not set
-# CONFIG_FASTLANE_SCSI is not set
-# CONFIG_OKTAGON_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_AMIGA is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_AMIGA is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_A2232 is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_CIRRUS is not set
-CONFIG_FB_AMIGA=y
-CONFIG_FB_AMIGA_OCS=y
-CONFIG_FB_AMIGA_ECS=y
-CONFIG_FB_AMIGA_AGA=y
-# CONFIG_FB_FM2 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# Character devices
-#
-CONFIG_AMIGA_BUILTIN_SERIAL=y
-# CONFIG_MULTIFACE_III_TTY is not set
-# CONFIG_GVPIOEXT is not set
-# CONFIG_SERIAL_CONSOLE is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_AMIGA_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/m68k/emu/Makefile b/arch/m68k/emu/Makefile
new file mode 100644
index 00000000000..7dc20108030
--- /dev/null
+++ b/arch/m68k/emu/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for Linux arch/m68k/emu source directory
+#
+
+obj-y			+= natfeat.o
+
+obj-$(CONFIG_NFBLOCK)	+= nfblock.o
+obj-$(CONFIG_NFCON)	+= nfcon.o
+obj-$(CONFIG_NFETH)	+= nfeth.o
diff --git a/arch/m68k/emu/natfeat.c b/arch/m68k/emu/natfeat.c
new file mode 100644
index 00000000000..71b78ecee75
--- /dev/null
+++ b/arch/m68k/emu/natfeat.c
@@ -0,0 +1,94 @@
+/*
+ * natfeat.c - ARAnyM hardware support via Native Features (natfeats)
+ *
+ * Copyright (c) 2005 Petr Stehlik of ARAnyM dev team
+ *
+ * Reworked for Linux by Roman Zippel <zippel@linux-m68k.org>
+ *
+ * This software may be used and distributed according to the terms of
+ * the GNU General Public License (GPL), incorporated herein by reference.
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/console.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/natfeat.h>
+
+extern long nf_get_id_phys(unsigned long feature_name);
+
+asm("\n"
+"	.global nf_get_id_phys,nf_call\n"
+"nf_get_id_phys:\n"
+"	.short	0x7300\n"
+"	rts\n"
+"nf_call:\n"
+"	.short	0x7301\n"
+"	rts\n"
+"1:	moveq.l	#0,%d0\n"
+"	rts\n"
+"	.section __ex_table,\"a\"\n"
+"	.long	nf_get_id_phys,1b\n"
+"	.long	nf_call,1b\n"
+"	.previous");
+EXPORT_SYMBOL_GPL(nf_call);
+
+long nf_get_id(const char *feature_name)
+{
+	/* feature_name may be in vmalloc()ed memory, so make a copy */
+	char name_copy[32];
+	size_t n;
+
+	n = strlcpy(name_copy, feature_name, sizeof(name_copy));
+	if (n >= sizeof(name_copy))
+		return 0;
+
+	return nf_get_id_phys(virt_to_phys(name_copy));
+}
+EXPORT_SYMBOL_GPL(nf_get_id);
+
+void nfprint(const char *fmt, ...)
+{
+	static char buf[256];
+	va_list ap;
+	int n;
+
+	va_start(ap, fmt);
+	n = vsnprintf(buf, 256, fmt, ap);
+	nf_call(nf_get_id("NF_STDERR"), virt_to_phys(buf));
+	va_end(ap);
+}
+
+static void nf_poweroff(void)
+{
+	long id = nf_get_id("NF_SHUTDOWN");
+
+	if (id)
+		nf_call(id);
+}
+
+void __init nf_init(void)
+{
+	unsigned long id, version;
+	char buf[256];
+
+	id = nf_get_id("NF_VERSION");
+	if (!id)
+		return;
+	version = nf_call(id);
+
+	id = nf_get_id("NF_NAME");
+	if (!id)
+		return;
+	nf_call(id, virt_to_phys(buf), 256);
+	buf[255] = 0;
+
+	pr_info("NatFeats found (%s, %lu.%lu)\n", buf, version >> 16,
+		version & 0xffff);
+
+	mach_power_off = nf_poweroff;
+}
diff --git a/arch/m68k/emu/nfblock.c b/arch/m68k/emu/nfblock.c
new file mode 100644
index 00000000000..2d75ae24616
--- /dev/null
+++ b/arch/m68k/emu/nfblock.c
@@ -0,0 +1,195 @@
+/*
+ * ARAnyM block device driver
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/genhd.h>
+#include <linux/blkdev.h>
+#include <linux/hdreg.h>
+#include <linux/slab.h>
+
+#include <asm/natfeat.h>
+
+static long nfhd_id;
+
+enum {
+	/* emulation entry points */
+	NFHD_READ_WRITE = 10,
+	NFHD_GET_CAPACITY = 14,
+
+	/* skip ACSI devices */
+	NFHD_DEV_OFFSET = 8,
+};
+
+static inline s32 nfhd_read_write(u32 major, u32 minor, u32 rwflag, u32 recno,
+				  u32 count, u32 buf)
+{
+	return nf_call(nfhd_id + NFHD_READ_WRITE, major, minor, rwflag, recno,
+		       count, buf);
+}
+
+static inline s32 nfhd_get_capacity(u32 major, u32 minor, u32 *blocks,
+				    u32 *blocksize)
+{
+	return nf_call(nfhd_id + NFHD_GET_CAPACITY, major, minor,
+		       virt_to_phys(blocks), virt_to_phys(blocksize));
+}
+
+static LIST_HEAD(nfhd_list);
+
+static int major_num;
+module_param(major_num, int, 0);
+
+struct nfhd_device {
+	struct list_head list;
+	int id;
+	u32 blocks, bsize;
+	int bshift;
+	struct request_queue *queue;
+	struct gendisk *disk;
+};
+
+static void nfhd_make_request(struct request_queue *queue, struct bio *bio)
+{
+	struct nfhd_device *dev = queue->queuedata;
+	struct bio_vec bvec;
+	struct bvec_iter iter;
+	int dir, len, shift;
+	sector_t sec = bio->bi_iter.bi_sector;
+
+	dir = bio_data_dir(bio);
+	shift = dev->bshift;
+	bio_for_each_segment(bvec, bio, iter) {
+		len = bvec.bv_len;
+		len >>= 9;
+		nfhd_read_write(dev->id, 0, dir, sec >> shift, len >> shift,
+				bvec_to_phys(&bvec));
+		sec += len;
+	}
+	bio_endio(bio, 0);
+}
+
+static int nfhd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
+{
+	struct nfhd_device *dev = bdev->bd_disk->private_data;
+
+	geo->cylinders = dev->blocks >> (6 - dev->bshift);
+	geo->heads = 4;
+	geo->sectors = 16;
+
+	return 0;
+}
+
+static const struct block_device_operations nfhd_ops = {
+	.owner	= THIS_MODULE,
+	.getgeo	= nfhd_getgeo,
+};
+
+static int __init nfhd_init_one(int id, u32 blocks, u32 bsize)
+{
+	struct nfhd_device *dev;
+	int dev_id = id - NFHD_DEV_OFFSET;
+
+	pr_info("nfhd%u: found device with %u blocks (%u bytes)\n", dev_id,
+		blocks, bsize);
+
+	if (bsize < 512 || (bsize & (bsize - 1))) {
+		pr_warn("nfhd%u: invalid block size\n", dev_id);
+		return -EINVAL;
+	}
+
+	dev = kmalloc(sizeof(struct nfhd_device), GFP_KERNEL);
+	if (!dev)
+		goto out;
+
+	dev->id = id;
+	dev->blocks = blocks;
+	dev->bsize = bsize;
+	dev->bshift = ffs(bsize) - 10;
+
+	dev->queue = blk_alloc_queue(GFP_KERNEL);
+	if (dev->queue == NULL)
+		goto free_dev;
+
+	dev->queue->queuedata = dev;
+	blk_queue_make_request(dev->queue, nfhd_make_request);
+	blk_queue_logical_block_size(dev->queue, bsize);
+
+	dev->disk = alloc_disk(16);
+	if (!dev->disk)
+		goto free_queue;
+
+	dev->disk->major = major_num;
+	dev->disk->first_minor = dev_id * 16;
+	dev->disk->fops = &nfhd_ops;
+	dev->disk->private_data = dev;
+	sprintf(dev->disk->disk_name, "nfhd%u", dev_id);
+	set_capacity(dev->disk, (sector_t)blocks * (bsize / 512));
+	dev->disk->queue = dev->queue;
+
+	add_disk(dev->disk);
+
+	list_add_tail(&dev->list, &nfhd_list);
+
+	return 0;
+
+free_queue:
+	blk_cleanup_queue(dev->queue);
+free_dev:
+	kfree(dev);
+out:
+	return -ENOMEM;
+}
+
+static int __init nfhd_init(void)
+{
+	u32 blocks, bsize;
+	int i;
+
+	nfhd_id = nf_get_id("XHDI");
+	if (!nfhd_id)
+		return -ENODEV;
+
+	major_num = register_blkdev(major_num, "nfhd");
+	if (major_num <= 0) {
+		pr_warn("nfhd: unable to get major number\n");
+		return major_num;
+	}
+
+	for (i = NFHD_DEV_OFFSET; i < 24; i++) {
+		if (nfhd_get_capacity(i, 0, &blocks, &bsize))
+			continue;
+		nfhd_init_one(i, blocks, bsize);
+	}
+
+	return 0;
+}
+
+static void __exit nfhd_exit(void)
+{
+	struct nfhd_device *dev, *next;
+
+	list_for_each_entry_safe(dev, next, &nfhd_list, list) {
+		list_del(&dev->list);
+		del_gendisk(dev->disk);
+		put_disk(dev->disk);
+		blk_cleanup_queue(dev->queue);
+		kfree(dev);
+	}
+	unregister_blkdev(major_num, "nfhd");
+}
+
+module_init(nfhd_init);
+module_exit(nfhd_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/arch/m68k/emu/nfcon.c b/arch/m68k/emu/nfcon.c
new file mode 100644
index 00000000000..57e8c8fb5eb
--- /dev/null
+++ b/arch/m68k/emu/nfcon.c
@@ -0,0 +1,169 @@
+/*
+ * ARAnyM console driver
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+
+#include <asm/natfeat.h>
+
+static int stderr_id;
+static struct tty_port nfcon_tty_port;
+static struct tty_driver *nfcon_tty_driver;
+
+static void nfputs(const char *str, unsigned int count)
+{
+	char buf[68];
+	unsigned long phys = virt_to_phys(buf);
+
+	buf[64] = 0;
+	while (count > 64) {
+		memcpy(buf, str, 64);
+		nf_call(stderr_id, phys);
+		str += 64;
+		count -= 64;
+	}
+	memcpy(buf, str, count);
+	buf[count] = 0;
+	nf_call(stderr_id, phys);
+}
+
+static void nfcon_write(struct console *con, const char *str,
+			unsigned int count)
+{
+	nfputs(str, count);
+}
+
+static struct tty_driver *nfcon_device(struct console *con, int *index)
+{
+	*index = 0;
+	return (con->flags & CON_ENABLED) ? nfcon_tty_driver : NULL;
+}
+
+static struct console nf_console = {
+	.name	= "nfcon",
+	.write	= nfcon_write,
+	.device	= nfcon_device,
+	.flags	= CON_PRINTBUFFER,
+	.index	= -1,
+};
+
+
+static int nfcon_tty_open(struct tty_struct *tty, struct file *filp)
+{
+	return 0;
+}
+
+static void nfcon_tty_close(struct tty_struct *tty, struct file *filp)
+{
+}
+
+static int nfcon_tty_write(struct tty_struct *tty, const unsigned char *buf,
+			   int count)
+{
+	nfputs(buf, count);
+	return count;
+}
+
+static int nfcon_tty_put_char(struct tty_struct *tty, unsigned char ch)
+{
+	char temp[2] = { ch, 0 };
+
+	nf_call(stderr_id, virt_to_phys(temp));
+	return 1;
+}
+
+static int nfcon_tty_write_room(struct tty_struct *tty)
+{
+	return 64;
+}
+
+static const struct tty_operations nfcon_tty_ops = {
+	.open		= nfcon_tty_open,
+	.close		= nfcon_tty_close,
+	.write		= nfcon_tty_write,
+	.put_char	= nfcon_tty_put_char,
+	.write_room	= nfcon_tty_write_room,
+};
+
+#ifndef MODULE
+
+static int __init nf_debug_setup(char *arg)
+{
+	if (strcmp(arg, "nfcon"))
+		return 0;
+
+	stderr_id = nf_get_id("NF_STDERR");
+	if (stderr_id) {
+		nf_console.flags |= CON_ENABLED;
+		register_console(&nf_console);
+	}
+
+	return 0;
+}
+
+early_param("debug", nf_debug_setup);
+
+#endif /* !MODULE */
+
+static int __init nfcon_init(void)
+{
+	int res;
+
+	stderr_id = nf_get_id("NF_STDERR");
+	if (!stderr_id)
+		return -ENODEV;
+
+	nfcon_tty_driver = alloc_tty_driver(1);
+	if (!nfcon_tty_driver)
+		return -ENOMEM;
+
+	tty_port_init(&nfcon_tty_port);
+
+	nfcon_tty_driver->driver_name = "nfcon";
+	nfcon_tty_driver->name = "nfcon";
+	nfcon_tty_driver->type = TTY_DRIVER_TYPE_SYSTEM;
+	nfcon_tty_driver->subtype = SYSTEM_TYPE_TTY;
+	nfcon_tty_driver->init_termios = tty_std_termios;
+	nfcon_tty_driver->flags = TTY_DRIVER_REAL_RAW;
+
+	tty_set_operations(nfcon_tty_driver, &nfcon_tty_ops);
+	tty_port_link_device(&nfcon_tty_port, nfcon_tty_driver, 0);
+	res = tty_register_driver(nfcon_tty_driver);
+	if (res) {
+		pr_err("failed to register nfcon tty driver\n");
+		put_tty_driver(nfcon_tty_driver);
+		tty_port_destroy(&nfcon_tty_port);
+		return res;
+	}
+
+	if (!(nf_console.flags & CON_ENABLED))
+		register_console(&nf_console);
+
+	return 0;
+}
+
+static void __exit nfcon_exit(void)
+{
+	unregister_console(&nf_console);
+	tty_unregister_driver(nfcon_tty_driver);
+	put_tty_driver(nfcon_tty_driver);
+	tty_port_destroy(&nfcon_tty_port);
+}
+
+module_init(nfcon_init);
+module_exit(nfcon_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/arch/m68k/emu/nfeth.c b/arch/m68k/emu/nfeth.c
new file mode 100644
index 00000000000..a0985fd088d
--- /dev/null
+++ b/arch/m68k/emu/nfeth.c
@@ -0,0 +1,271 @@
+/*
+ * atari_nfeth.c - ARAnyM ethernet card driver for GNU/Linux
+ *
+ * Copyright (c) 2005 Milan Jurik, Petr Stehlik of ARAnyM dev team
+ *
+ * Based on ARAnyM driver for FreeMiNT written by Standa Opichal
+ *
+ * This software may be used and distributed according to the terms of
+ * the GNU General Public License (GPL), incorporated herein by reference.
+ */
+
+#define DRV_VERSION	"0.3"
+#define DRV_RELDATE	"10/12/2005"
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <asm/natfeat.h>
+#include <asm/virtconvert.h>
+
+enum {
+	GET_VERSION = 0,/* no parameters, return NFAPI_VERSION in d0 */
+	XIF_INTLEVEL,	/* no parameters, return Interrupt Level in d0 */
+	XIF_IRQ,	/* acknowledge interrupt from host */
+	XIF_START,	/* (ethX), called on 'ifup', start receiver thread */
+	XIF_STOP,	/* (ethX), called on 'ifdown', stop the thread */
+	XIF_READLENGTH,	/* (ethX), return size of network data block to read */
+	XIF_READBLOCK,	/* (ethX, buffer, size), read block of network data */
+	XIF_WRITEBLOCK,	/* (ethX, buffer, size), write block of network data */
+	XIF_GET_MAC,	/* (ethX, buffer, size), return MAC HW addr in buffer */
+	XIF_GET_IPHOST,	/* (ethX, buffer, size), return IP address of host */
+	XIF_GET_IPATARI,/* (ethX, buffer, size), return IP address of atari */
+	XIF_GET_NETMASK	/* (ethX, buffer, size), return IP netmask */
+};
+
+#define MAX_UNIT	8
+
+/* These identify the driver base version and may not be removed. */
+static const char version[] =
+	KERN_INFO KBUILD_MODNAME ".c:v" DRV_VERSION " " DRV_RELDATE
+	" S.Opichal, M.Jurik, P.Stehlik\n"
+	KERN_INFO " http://aranym.org/\n";
+
+MODULE_AUTHOR("Milan Jurik");
+MODULE_DESCRIPTION("Atari NFeth driver");
+MODULE_LICENSE("GPL");
+/*
+MODULE_PARM(nfeth_debug, "i");
+MODULE_PARM_DESC(nfeth_debug, "nfeth_debug level (1-2)");
+*/
+
+
+static long nfEtherID;
+static int nfEtherIRQ;
+
+struct nfeth_private {
+	int ethX;
+};
+
+static struct net_device *nfeth_dev[MAX_UNIT];
+
+static int nfeth_open(struct net_device *dev)
+{
+	struct nfeth_private *priv = netdev_priv(dev);
+	int res;
+
+	res = nf_call(nfEtherID + XIF_START, priv->ethX);
+	netdev_dbg(dev, "%s: %d\n", __func__, res);
+
+	/* Ready for data */
+	netif_start_queue(dev);
+
+	return 0;
+}
+
+static int nfeth_stop(struct net_device *dev)
+{
+	struct nfeth_private *priv = netdev_priv(dev);
+
+	/* No more data */
+	netif_stop_queue(dev);
+
+	nf_call(nfEtherID + XIF_STOP, priv->ethX);
+
+	return 0;
+}
+
+/*
+ * Read a packet out of the adapter and pass it to the upper layers
+ */
+static inline void recv_packet(struct net_device *dev)
+{
+	struct nfeth_private *priv = netdev_priv(dev);
+	unsigned short pktlen;
+	struct sk_buff *skb;
+
+	/* read packet length (excluding 32 bit crc) */
+	pktlen = nf_call(nfEtherID + XIF_READLENGTH, priv->ethX);
+
+	netdev_dbg(dev, "%s: %u\n", __func__, pktlen);
+
+	if (!pktlen) {
+		netdev_dbg(dev, "%s: pktlen == 0\n", __func__);
+		dev->stats.rx_errors++;
+		return;
+	}
+
+	skb = dev_alloc_skb(pktlen + 2);
+	if (!skb) {
+		netdev_dbg(dev, "%s: out of mem (buf_alloc failed)\n",
+			   __func__);
+		dev->stats.rx_dropped++;
+		return;
+	}
+
+	skb->dev = dev;
+	skb_reserve(skb, 2);		/* 16 Byte align  */
+	skb_put(skb, pktlen);		/* make room */
+	nf_call(nfEtherID + XIF_READBLOCK, priv->ethX, virt_to_phys(skb->data),
+		pktlen);
+
+	skb->protocol = eth_type_trans(skb, dev);
+	netif_rx(skb);
+	dev->last_rx = jiffies;
+	dev->stats.rx_packets++;
+	dev->stats.rx_bytes += pktlen;
+
+	/* and enqueue packet */
+	return;
+}
+
+static irqreturn_t nfeth_interrupt(int irq, void *dev_id)
+{
+	int i, m, mask;
+
+	mask = nf_call(nfEtherID + XIF_IRQ, 0);
+	for (i = 0, m = 1; i < MAX_UNIT; m <<= 1, i++) {
+		if (mask & m && nfeth_dev[i]) {
+			recv_packet(nfeth_dev[i]);
+			nf_call(nfEtherID + XIF_IRQ, m);
+		}
+	}
+	return IRQ_HANDLED;
+}
+
+static int nfeth_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	unsigned int len;
+	char *data, shortpkt[ETH_ZLEN];
+	struct nfeth_private *priv = netdev_priv(dev);
+
+	data = skb->data;
+	len = skb->len;
+	if (len < ETH_ZLEN) {
+		memset(shortpkt, 0, ETH_ZLEN);
+		memcpy(shortpkt, data, len);
+		data = shortpkt;
+		len = ETH_ZLEN;
+	}
+
+	netdev_dbg(dev, "%s: send %u bytes\n", __func__, len);
+	nf_call(nfEtherID + XIF_WRITEBLOCK, priv->ethX, virt_to_phys(data),
+		len);
+
+	dev->stats.tx_packets++;
+	dev->stats.tx_bytes += len;
+
+	dev_kfree_skb(skb);
+	return 0;
+}
+
+static void nfeth_tx_timeout(struct net_device *dev)
+{
+	dev->stats.tx_errors++;
+	netif_wake_queue(dev);
+}
+
+static const struct net_device_ops nfeth_netdev_ops = {
+	.ndo_open		= nfeth_open,
+	.ndo_stop		= nfeth_stop,
+	.ndo_start_xmit		= nfeth_xmit,
+	.ndo_tx_timeout		= nfeth_tx_timeout,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
+static struct net_device * __init nfeth_probe(int unit)
+{
+	struct net_device *dev;
+	struct nfeth_private *priv;
+	char mac[ETH_ALEN], host_ip[32], local_ip[32];
+	int err;
+
+	if (!nf_call(nfEtherID + XIF_GET_MAC, unit, virt_to_phys(mac),
+		     ETH_ALEN))
+		return NULL;
+
+	dev = alloc_etherdev(sizeof(struct nfeth_private));
+	if (!dev)
+		return NULL;
+
+	dev->irq = nfEtherIRQ;
+	dev->netdev_ops = &nfeth_netdev_ops;
+
+	memcpy(dev->dev_addr, mac, ETH_ALEN);
+
+	priv = netdev_priv(dev);
+	priv->ethX = unit;
+
+	err = register_netdev(dev);
+	if (err) {
+		free_netdev(dev);
+		return NULL;
+	}
+
+	nf_call(nfEtherID + XIF_GET_IPHOST, unit,
+		virt_to_phys(host_ip), sizeof(host_ip));
+	nf_call(nfEtherID + XIF_GET_IPATARI, unit,
+		virt_to_phys(local_ip), sizeof(local_ip));
+
+	netdev_info(dev, KBUILD_MODNAME " addr:%s (%s) HWaddr:%pM\n", host_ip,
+		    local_ip, mac);
+
+	return dev;
+}
+
+static int __init nfeth_init(void)
+{
+	long ver;
+	int error, i;
+
+	nfEtherID = nf_get_id("ETHERNET");
+	if (!nfEtherID)
+		return -ENODEV;
+
+	ver = nf_call(nfEtherID + GET_VERSION);
+	pr_info("API %lu\n", ver);
+
+	nfEtherIRQ = nf_call(nfEtherID + XIF_INTLEVEL);
+	error = request_irq(nfEtherIRQ, nfeth_interrupt, IRQF_SHARED,
+			    "eth emu", nfeth_interrupt);
+	if (error) {
+		pr_err("request for irq %d failed %d", nfEtherIRQ, error);
+		return error;
+	}
+
+	for (i = 0; i < MAX_UNIT; i++)
+		nfeth_dev[i] = nfeth_probe(i);
+
+	return 0;
+}
+
+static void __exit nfeth_cleanup(void)
+{
+	int i;
+
+	for (i = 0; i < MAX_UNIT; i++) {
+		if (nfeth_dev[i]) {
+			unregister_netdev(nfeth_dev[0]);
+			free_netdev(nfeth_dev[0]);
+		}
+	}
+	free_irq(nfEtherIRQ, nfeth_interrupt);
+}
+
+module_init(nfeth_init);
+module_exit(nfeth_cleanup);
diff --git a/arch/m68k/fpsp040/Makefile b/arch/m68k/fpsp040/Makefile
index 0214d2f6f8b..9506d883ace 100644
--- a/arch/m68k/fpsp040/Makefile
+++ b/arch/m68k/fpsp040/Makefile
@@ -10,7 +10,6 @@ obj-y    := bindec.o binstr.o decbin.o do_func.o gen_except.o get_op.o \
 	    x_bsun.o x_fline.o x_operr.o x_ovfl.o x_snan.o x_store.o \
 	    x_unfl.o x_unimp.o x_unsupp.o bugfix.o skeleton.o
 
-EXTRA_AFLAGS := -traditional
 EXTRA_LDFLAGS := -x
 
 $(OS_OBJS): fpsp.h
diff --git a/arch/m68k/fpsp040/bindec.S b/arch/m68k/fpsp040/bindec.S
index 3ba446a99a1..f2e79523104 100644
--- a/arch/m68k/fpsp040/bindec.S
+++ b/arch/m68k/fpsp040/bindec.S
@@ -131,9 +131,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-|	The copyright notice above does not evidence any
-|	actual or intended publication of such source code.
+|       For details on the license for this file, please see the
+|       file, README, in this same directory.
 
 |BINDEC    idnt    2,1 | Motorola 040 Floating Point Software Package
 
@@ -610,7 +609,7 @@ do_fint:
 |      A6.  This test occurs only on the first pass.  If the
 |      result is exactly 10^LEN, decrement ILOG and divide
 |      the mantissa by 10.  The calculation of 10^LEN cannot
-|      be inexact, since all powers of ten upto 10^27 are exact
+|      be inexact, since all powers of ten up to 10^27 are exact
 |      in extended precision, so the use of a previous power-of-ten
 |      table will introduce no error.
 |
diff --git a/arch/m68k/fpsp040/binstr.S b/arch/m68k/fpsp040/binstr.S