diff options
Diffstat (limited to 'net/wimax/op-rfkill.c')
| -rw-r--r-- | net/wimax/op-rfkill.c | 166 |
1 files changed, 41 insertions, 125 deletions
diff --git a/net/wimax/op-rfkill.c b/net/wimax/op-rfkill.c index 2b75aee0421..403078d670a 100644 --- a/net/wimax/op-rfkill.c +++ b/net/wimax/op-rfkill.c @@ -29,8 +29,8 @@ * A non-polled generic rfkill device is embedded into the WiMAX * subsystem's representation of a device. * - * FIXME: Need polled support? use a timer or add the implementation - * to the stack. + * FIXME: Need polled support? Let drivers provide a poll routine + * and hand it to rfkill ops then? * * All device drivers have to do is after wimax_dev_init(), call * wimax_report_rfkill_hw() and wimax_report_rfkill_sw() to update @@ -43,7 +43,7 @@ * wimax_rfkill() Kernel calling wimax_rfkill() * __wimax_rf_toggle_radio() * - * wimax_rfkill_toggle_radio() RF-Kill subsytem calling + * wimax_rfkill_set_radio_block() RF-Kill subsystem calling * __wimax_rf_toggle_radio() * * __wimax_rf_toggle_radio() @@ -65,15 +65,12 @@ #include <linux/wimax.h> #include <linux/security.h> #include <linux/rfkill.h> -#include <linux/input.h> +#include <linux/export.h> #include "wimax-internal.h" #define D_SUBMODULE op_rfkill #include "debug-levels.h" -#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) - - /** * wimax_report_rfkill_hw - Reports changes in the hardware RF switch * @@ -99,7 +96,6 @@ void wimax_report_rfkill_hw(struct wimax_dev *wimax_dev, int result; struct device *dev = wimax_dev_to_dev(wimax_dev); enum wimax_st wimax_state; - enum rfkill_state rfkill_state; d_fnstart(3, dev, "(wimax_dev %p state %u)\n", wimax_dev, state); BUG_ON(state == WIMAX_RF_QUERY); @@ -112,16 +108,16 @@ void wimax_report_rfkill_hw(struct wimax_dev *wimax_dev, if (state != wimax_dev->rf_hw) { wimax_dev->rf_hw = state; - rfkill_state = state == WIMAX_RF_ON ? - RFKILL_STATE_OFF : RFKILL_STATE_ON; - if (wimax_dev->rf_hw == WIMAX_RF_ON - && wimax_dev->rf_sw == WIMAX_RF_ON) + if (wimax_dev->rf_hw == WIMAX_RF_ON && + wimax_dev->rf_sw == WIMAX_RF_ON) wimax_state = WIMAX_ST_READY; else wimax_state = WIMAX_ST_RADIO_OFF; + + result = rfkill_set_hw_state(wimax_dev->rfkill, + state == WIMAX_RF_OFF); + __wimax_state_change(wimax_dev, wimax_state); - input_report_key(wimax_dev->rfkill_input, KEY_WIMAX, - rfkill_state); } error_not_ready: mutex_unlock(&wimax_dev->mutex); @@ -168,12 +164,13 @@ void wimax_report_rfkill_sw(struct wimax_dev *wimax_dev, if (state != wimax_dev->rf_sw) { wimax_dev->rf_sw = state; - if (wimax_dev->rf_hw == WIMAX_RF_ON - && wimax_dev->rf_sw == WIMAX_RF_ON) + if (wimax_dev->rf_hw == WIMAX_RF_ON && + wimax_dev->rf_sw == WIMAX_RF_ON) wimax_state = WIMAX_ST_READY; else wimax_state = WIMAX_ST_RADIO_OFF; __wimax_state_change(wimax_dev, wimax_state); + rfkill_set_sw_state(wimax_dev->rfkill, state == WIMAX_RF_OFF); } error_not_ready: mutex_unlock(&wimax_dev->mutex); @@ -249,36 +246,31 @@ out_no_change: * * NOTE: This call will block until the operation is completed. */ -static -int wimax_rfkill_toggle_radio(void *data, enum rfkill_state state) +static int wimax_rfkill_set_radio_block(void *data, bool blocked) { int result; struct wimax_dev *wimax_dev = data; struct device *dev = wimax_dev_to_dev(wimax_dev); enum wimax_rf_state rf_state; - d_fnstart(3, dev, "(wimax_dev %p state %u)\n", wimax_dev, state); - switch (state) { - case RFKILL_STATE_ON: + d_fnstart(3, dev, "(wimax_dev %p blocked %u)\n", wimax_dev, blocked); + rf_state = WIMAX_RF_ON; + if (blocked) rf_state = WIMAX_RF_OFF; - break; - case RFKILL_STATE_OFF: - rf_state = WIMAX_RF_ON; - break; - default: - BUG(); - } mutex_lock(&wimax_dev->mutex); if (wimax_dev->state <= __WIMAX_ST_QUIESCING) - result = 0; /* just pretend it didn't happen */ + result = 0; else result = __wimax_rf_toggle_radio(wimax_dev, rf_state); mutex_unlock(&wimax_dev->mutex); - d_fnend(3, dev, "(wimax_dev %p state %u) = %d\n", - wimax_dev, state, result); + d_fnend(3, dev, "(wimax_dev %p blocked %u) = %d\n", + wimax_dev, blocked, result); return result; } +static const struct rfkill_ops wimax_rfkill_ops = { + .set_block = wimax_rfkill_set_radio_block, +}; /** * wimax_rfkill - Set the software RF switch state for a WiMAX device @@ -314,14 +306,22 @@ int wimax_rfkill(struct wimax_dev *wimax_dev, enum wimax_rf_state state) d_fnstart(3, dev, "(wimax_dev %p state %u)\n", wimax_dev, state); mutex_lock(&wimax_dev->mutex); result = wimax_dev_is_ready(wimax_dev); - if (result < 0) + if (result < 0) { + /* While initializing, < 1.4.3 wimax-tools versions use + * this call to check if the device is a valid WiMAX + * device; so we allow it to proceed always, + * considering the radios are all off. */ + if (result == -ENOMEDIUM && state == WIMAX_RF_QUERY) + result = WIMAX_RF_OFF << 1 | WIMAX_RF_OFF; goto error_not_ready; + } switch (state) { case WIMAX_RF_ON: case WIMAX_RF_OFF: result = __wimax_rf_toggle_radio(wimax_dev, state); if (result < 0) goto error; + rfkill_set_sw_state(wimax_dev->rfkill, state == WIMAX_RF_OFF); break; case WIMAX_RF_QUERY: break; @@ -349,41 +349,21 @@ int wimax_rfkill_add(struct wimax_dev *wimax_dev) { int result; struct rfkill *rfkill; - struct input_dev *input_dev; struct device *dev = wimax_dev_to_dev(wimax_dev); d_fnstart(3, dev, "(wimax_dev %p)\n", wimax_dev); /* Initialize RF Kill */ result = -ENOMEM; - rfkill = rfkill_allocate(dev, RFKILL_TYPE_WIMAX); + rfkill = rfkill_alloc(wimax_dev->name, dev, RFKILL_TYPE_WIMAX, + &wimax_rfkill_ops, wimax_dev); if (rfkill == NULL) goto error_rfkill_allocate; + + d_printf(1, dev, "rfkill %p\n", rfkill); + wimax_dev->rfkill = rfkill; - rfkill->name = wimax_dev->name; - rfkill->state = RFKILL_STATE_OFF; - rfkill->data = wimax_dev; - rfkill->toggle_radio = wimax_rfkill_toggle_radio; - rfkill->user_claim_unsupported = 1; - - /* Initialize the input device for the hw key */ - input_dev = input_allocate_device(); - if (input_dev == NULL) - goto error_input_allocate; - wimax_dev->rfkill_input = input_dev; - d_printf(1, dev, "rfkill %p input %p\n", rfkill, input_dev); - - input_dev->name = wimax_dev->name; - /* FIXME: get a real device bus ID and stuff? do we care? */ - input_dev->id.bustype = BUS_HOST; - input_dev->id.vendor = 0xffff; - input_dev->evbit[0] = BIT(EV_KEY); - set_bit(KEY_WIMAX, input_dev->keybit); - - /* Register both */ - result = input_register_device(wimax_dev->rfkill_input); - if (result < 0) - goto error_input_register; + rfkill_init_sw_state(rfkill, 1); result = rfkill_register(wimax_dev->rfkill); if (result < 0) goto error_rfkill_register; @@ -395,17 +375,8 @@ int wimax_rfkill_add(struct wimax_dev *wimax_dev) d_fnend(3, dev, "(wimax_dev %p) = 0\n", wimax_dev); return 0; - /* if rfkill_register() suceeds, can't use rfkill_free() any - * more, only rfkill_unregister() [it owns the refcount]; with - * the input device we have the same issue--hence the if. */ error_rfkill_register: - input_unregister_device(wimax_dev->rfkill_input); - wimax_dev->rfkill_input = NULL; -error_input_register: - if (wimax_dev->rfkill_input) - input_free_device(wimax_dev->rfkill_input); -error_input_allocate: - rfkill_free(wimax_dev->rfkill); + rfkill_destroy(wimax_dev->rfkill); error_rfkill_allocate: d_fnend(3, dev, "(wimax_dev %p) = %d\n", wimax_dev, result); return result; @@ -424,45 +395,12 @@ void wimax_rfkill_rm(struct wimax_dev *wimax_dev) { struct device *dev = wimax_dev_to_dev(wimax_dev); d_fnstart(3, dev, "(wimax_dev %p)\n", wimax_dev); - rfkill_unregister(wimax_dev->rfkill); /* frees */ - input_unregister_device(wimax_dev->rfkill_input); + rfkill_unregister(wimax_dev->rfkill); + rfkill_destroy(wimax_dev->rfkill); d_fnend(3, dev, "(wimax_dev %p)\n", wimax_dev); } -#else /* #ifdef CONFIG_RFKILL */ - -void wimax_report_rfkill_hw(struct wimax_dev *wimax_dev, - enum wimax_rf_state state) -{ -} -EXPORT_SYMBOL_GPL(wimax_report_rfkill_hw); - -void wimax_report_rfkill_sw(struct wimax_dev *wimax_dev, - enum wimax_rf_state state) -{ -} -EXPORT_SYMBOL_GPL(wimax_report_rfkill_sw); - -int wimax_rfkill(struct wimax_dev *wimax_dev, - enum wimax_rf_state state) -{ - return WIMAX_RF_ON << 1 | WIMAX_RF_ON; -} -EXPORT_SYMBOL_GPL(wimax_rfkill); - -int wimax_rfkill_add(struct wimax_dev *wimax_dev) -{ - return 0; -} - -void wimax_rfkill_rm(struct wimax_dev *wimax_dev) -{ -} - -#endif /* #ifdef CONFIG_RFKILL */ - - /* * Exporting to user space over generic netlink * @@ -473,18 +411,6 @@ void wimax_rfkill_rm(struct wimax_dev *wimax_dev) * just query). */ -static const -struct nla_policy wimax_gnl_rfkill_policy[WIMAX_GNL_ATTR_MAX + 1] = { - [WIMAX_GNL_RFKILL_IFIDX] = { - .type = NLA_U32, - }, - [WIMAX_GNL_RFKILL_STATE] = { - .type = NLA_U32 /* enum wimax_rf_state */ - }, -}; - - -static int wimax_gnl_doit_rfkill(struct sk_buff *skb, struct genl_info *info) { int result, ifindex; @@ -520,13 +446,3 @@ error_no_wimax_dev: d_fnend(3, NULL, "(skb %p info %p) = %d\n", skb, info, result); return result; } - - -struct genl_ops wimax_gnl_rfkill = { - .cmd = WIMAX_GNL_OP_RFKILL, - .flags = GENL_ADMIN_PERM, - .policy = wimax_gnl_rfkill_policy, - .doit = wimax_gnl_doit_rfkill, - .dumpit = NULL, -}; - |