1 files changed, 62 insertions, 153 deletions

diff --git a/net/mac80211/mesh_sync.c b/net/mac80211/mesh_sync.c
index 38d30e8ce6d..09625d6205c 100644
--- a/net/mac80211/mesh_sync.c
+++ b/net/mac80211/mesh_sync.c
@@ -12,13 +12,6 @@
 #include "mesh.h"
 #include "driver-ops.h"
 
-#ifdef CONFIG_MAC80211_VERBOSE_MESH_SYNC_DEBUG
-#define msync_dbg(fmt, args...) \
-	printk(KERN_DEBUG "Mesh sync (%s): " fmt "\n", sdata->name, ##args)
-#else
-#define msync_dbg(fmt, args...)   do { (void)(0); } while (0)
-#endif
-
 /* This is not in the standard.  It represents a tolerable tbtt drift below
  * which we do no TSF adjustment.
  */
@@ -50,7 +43,7 @@ struct sync_method {
 static bool mesh_peer_tbtt_adjusting(struct ieee802_11_elems *ie)
 {
 	return (ie->mesh_config->meshconf_cap &
-	    MESHCONF_CAPAB_TBTT_ADJUSTING) != 0;
+			IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING) != 0;
 }
 
 void mesh_sync_adjust_tbtt(struct ieee80211_sub_if_data *sdata)
@@ -63,24 +56,23 @@ void mesh_sync_adjust_tbtt(struct ieee80211_sub_if_data *sdata)
 	u64 tsfdelta;
 
 	spin_lock_bh(&ifmsh->sync_offset_lock);
-
 	if (ifmsh->sync_offset_clockdrift_max < beacon_int_fraction) {
-		msync_dbg("TBTT : max clockdrift=%lld; adjusting",
-			(long long) ifmsh->sync_offset_clockdrift_max);
+		msync_dbg(sdata, "TBTT : max clockdrift=%lld; adjusting\n",
+			  (long long) ifmsh->sync_offset_clockdrift_max);
 		tsfdelta = -ifmsh->sync_offset_clockdrift_max;
 		ifmsh->sync_offset_clockdrift_max = 0;
 	} else {
-		msync_dbg("TBTT : max clockdrift=%lld; adjusting by %llu",
-			(long long) ifmsh->sync_offset_clockdrift_max,
-			(unsigned long long) beacon_int_fraction);
+		msync_dbg(sdata, "TBTT : max clockdrift=%lld; adjusting by %llu\n",
+			  (long long) ifmsh->sync_offset_clockdrift_max,
+			  (unsigned long long) beacon_int_fraction);
 		tsfdelta = -beacon_int_fraction;
 		ifmsh->sync_offset_clockdrift_max -= beacon_int_fraction;
 	}
+	spin_unlock_bh(&ifmsh->sync_offset_lock);
 
 	tsf = drv_get_tsf(local, sdata);
 	if (tsf != -1ULL)
 		drv_set_tsf(local, sdata, tsf + tsfdelta);
-	spin_unlock_bh(&ifmsh->sync_offset_lock);
 }
 
 static void mesh_sync_offset_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
@@ -100,12 +92,20 @@ static void mesh_sync_offset_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
 	if (stype != IEEE80211_STYPE_BEACON)
 		return;
 
-	/* The current tsf is a first approximation for the timestamp
-	 * for the received beacon.  Further down we try to get a
-	 * better value from the rx_status->mactime field if
-	 * available. Also we have to call drv_get_tsf() before
-	 * entering the rcu-read section.*/
-	t_r = drv_get_tsf(local, sdata);
+	/*
+	 * Get time when timestamp field was received.  If we don't
+	 * have rx timestamps, then use current tsf as an approximation.
+	 * drv_get_tsf() must be called before entering the rcu-read
+	 * section.
+	 */
+	if (ieee80211_have_rx_timestamp(rx_status))
+		t_r = ieee80211_calculate_rx_timestamp(local, rx_status,
+						       24 + 12 +
+						       elems->total_len +
+						       FCS_LEN,
+						       24);
+	else
+		t_r = drv_get_tsf(local, sdata);
 
 	rcu_read_lock();
 	sta = sta_info_get(sdata, mgmt->sa);
@@ -120,171 +120,90 @@ static void mesh_sync_offset_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
 
 	if (elems->mesh_config && mesh_peer_tbtt_adjusting(elems)) {
 		clear_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN);
-		msync_dbg("STA %pM : is adjusting TBTT", sta->sta.addr);
+		msync_dbg(sdata, "STA %pM : is adjusting TBTT\n",
+			  sta->sta.addr);
 		goto no_sync;
 	}
 
-	if (rx_status->flag & RX_FLAG_MACTIME_MPDU && rx_status->mactime) {
-		/*
-		 * The mactime is defined as the time the first data symbol
-		 * of the frame hits the PHY, and the timestamp of the beacon
-		 * is defined as "the time that the data symbol containing the
-		 * first bit of the timestamp is transmitted to the PHY plus
-		 * the transmitting STA's delays through its local PHY from the
-		 * MAC-PHY interface to its interface with the WM" (802.11
-		 * 11.1.2)
-		 *
-		 * T_r, in 13.13.2.2.2, is just defined as "the frame reception
-		 * time" but we unless we interpret that time to be the same
-		 * time of the beacon timestamp, the offset calculation will be
-		 * off.  Below we adjust t_r to be "the time at which the first
-		 * symbol of the timestamp element in the beacon is received".
-		 * This correction depends on the rate.
-		 *
-		 * Based on similar code in ibss.c
-		 */
-		int rate;
-
-		if (rx_status->flag & RX_FLAG_HT) {
-			/* TODO:
-			 * In principle there could be HT-beacons (Dual Beacon
-			 * HT Operation options), but for now ignore them and
-			 * just use the primary (i.e. non-HT) beacons for
-			 * synchronization.
-			 * */
-			goto no_sync;
-		} else
-			rate = local->hw.wiphy->bands[rx_status->band]->
-				bitrates[rx_status->rate_idx].bitrate;
-
-		/* 24 bytes of header * 8 bits/byte *
-		 * 10*(100 Kbps)/Mbps / rate (100 Kbps)*/
-		t_r = rx_status->mactime + (24 * 8 * 10 / rate);
-	}
-
 	/* Timing offset calculation (see 13.13.2.2.2) */
 	t_t = le64_to_cpu(mgmt->u.beacon.timestamp);
 	sta->t_offset = t_t - t_r;
 
 	if (test_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN)) {
-		s64 t_clockdrift = sta->t_offset_setpoint
-				   - sta->t_offset;
-		msync_dbg("STA %pM : sta->t_offset=%lld, sta->t_offset_setpoint=%lld, t_clockdrift=%lld",
-			  sta->sta.addr,
-			  (long long) sta->t_offset,
-			  (long long)
-			  sta->t_offset_setpoint,
+		s64 t_clockdrift = sta->t_offset_setpoint - sta->t_offset;
+		msync_dbg(sdata,
+			  "STA %pM : sta->t_offset=%lld, sta->t_offset_setpoint=%lld, t_clockdrift=%lld\n",
+			  sta->sta.addr, (long long) sta->t_offset,
+			  (long long) sta->t_offset_setpoint,
 			  (long long) t_clockdrift);
 
 		if (t_clockdrift > TOFFSET_MAXIMUM_ADJUSTMENT ||
-			t_clockdrift < -TOFFSET_MAXIMUM_ADJUSTMENT) {
-			msync_dbg("STA %pM : t_clockdrift=%lld too large, setpoint reset",
+		    t_clockdrift < -TOFFSET_MAXIMUM_ADJUSTMENT) {
+			msync_dbg(sdata,
+				  "STA %pM : t_clockdrift=%lld too large, setpoint reset\n",
 				  sta->sta.addr,
 				  (long long) t_clockdrift);
 			clear_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN);
 			goto no_sync;
 		}
 
-		rcu_read_unlock();
-
 		spin_lock_bh(&ifmsh->sync_offset_lock);
-		if (t_clockdrift >
-		    ifmsh->sync_offset_clockdrift_max)
-			ifmsh->sync_offset_clockdrift_max
-				= t_clockdrift;
+		if (t_clockdrift > ifmsh->sync_offset_clockdrift_max)
+			ifmsh->sync_offset_clockdrift_max = t_clockdrift;
 		spin_unlock_bh(&ifmsh->sync_offset_lock);
-
 	} else {
 		sta->t_offset_setpoint = sta->t_offset - TOFFSET_SET_MARGIN;
 		set_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN);
-		msync_dbg("STA %pM : offset was invalid, "
-			  " sta->t_offset=%lld",
+		msync_dbg(sdata,
+			  "STA %pM : offset was invalid, sta->t_offset=%lld\n",
 			  sta->sta.addr,
 			  (long long) sta->t_offset);
-		rcu_read_unlock();
 	}
-	return;
 
 no_sync:
 	rcu_read_unlock();
 }
 
-static void mesh_sync_offset_adjust_tbtt(struct ieee80211_sub_if_data *sdata)
+static void mesh_sync_offset_adjust_tbtt(struct ieee80211_sub_if_data *sdata,
+					 struct beacon_data *beacon)
 {
 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+	u8 cap;
 
-	WARN_ON(ifmsh->mesh_sp_id
-		!= IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET);
-	BUG_ON(!rcu_read_lock_held());
+	WARN_ON(ifmsh->mesh_sp_id != IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET);
+	WARN_ON(!rcu_read_lock_held());
+	cap = beacon->meshconf->meshconf_cap;
 
 	spin_lock_bh(&ifmsh->sync_offset_lock);
 
-	if (ifmsh->sync_offset_clockdrift_max >
-		TOFFSET_MINIMUM_ADJUSTMENT) {
+	if (ifmsh->sync_offset_clockdrift_max > TOFFSET_MINIMUM_ADJUSTMENT) {
 		/* Since ajusting the tsf here would
 		 * require a possibly blocking call
 		 * to the driver tsf setter, we punt
 		 * the tsf adjustment to the mesh tasklet
 		 */
-		msync_dbg("TBTT : kicking off TBTT "
-			  "adjustment with "
-			  "clockdrift_max=%lld",
-		  ifmsh->sync_offset_clockdrift_max);
-		set_bit(MESH_WORK_DRIFT_ADJUST,
-			&ifmsh->wrkq_flags);
+		msync_dbg(sdata,
+			  "TBTT : kicking off TBTT adjustment with clockdrift_max=%lld\n",
+			  ifmsh->sync_offset_clockdrift_max);
+		set_bit(MESH_WORK_DRIFT_ADJUST, &ifmsh->wrkq_flags);
+
+		ifmsh->adjusting_tbtt = true;
 	} else {
-		msync_dbg("TBTT : max clockdrift=%lld; "
-			  "too small to adjust",
-			  (long long)
-		       ifmsh->sync_offset_clockdrift_max);
+		msync_dbg(sdata,
+			  "TBTT : max clockdrift=%lld; too small to adjust\n",
+			  (long long)ifmsh->sync_offset_clockdrift_max);
 		ifmsh->sync_offset_clockdrift_max = 0;
+
+		ifmsh->adjusting_tbtt = false;
 	}
 	spin_unlock_bh(&ifmsh->sync_offset_lock);
-}
-
-static const u8 *mesh_get_vendor_oui(struct ieee80211_sub_if_data *sdata)
-{
-	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
-	u8 offset;
 
-	if (!ifmsh->ie || !ifmsh->ie_len)
-		return NULL;
-
-	offset = ieee80211_ie_split_vendor(ifmsh->ie,
-					ifmsh->ie_len, 0);
-
-	if (!offset)
-		return NULL;
-
-	return ifmsh->ie + offset + 2;
-}
-
-static void mesh_sync_vendor_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
-				   u16 stype,
-				   struct ieee80211_mgmt *mgmt,
-				   struct ieee802_11_elems *elems,
-				   struct ieee80211_rx_status *rx_status)
-{
-	const u8 *oui;
-
-	WARN_ON(sdata->u.mesh.mesh_sp_id != IEEE80211_SYNC_METHOD_VENDOR);
-	msync_dbg("called mesh_sync_vendor_rx_bcn_presp");
-	oui = mesh_get_vendor_oui(sdata);
-	/*  here you would implement the vendor offset tracking for this oui */
-}
-
-static void mesh_sync_vendor_adjust_tbtt(struct ieee80211_sub_if_data *sdata)
-{
-	const u8 *oui;
-
-	WARN_ON(sdata->u.mesh.mesh_sp_id != IEEE80211_SYNC_METHOD_VENDOR);
-	msync_dbg("called mesh_sync_vendor_adjust_tbtt");
-	oui = mesh_get_vendor_oui(sdata);
-	/*  here you would implement the vendor tsf adjustment for this oui */
+	beacon->meshconf->meshconf_cap = ifmsh->adjusting_tbtt ?
+			IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING | cap :
+			~IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING & cap;
 }
 
-/* global variable */
-static struct sync_method sync_methods[] = {
+static const struct sync_method sync_methods[] = {
 	{
 		.method = IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET,
 		.ops = {
@@ -292,25 +211,15 @@ static struct sync_method sync_methods[] = {
 			.adjust_tbtt = &mesh_sync_offset_adjust_tbtt,
 		}
 	},
-	{
-		.method = IEEE80211_SYNC_METHOD_VENDOR,
-		.ops = {
-			.rx_bcn_presp = &mesh_sync_vendor_rx_bcn_presp,
-			.adjust_tbtt = &mesh_sync_vendor_adjust_tbtt,
-		}
-	},
 };
 
-struct ieee80211_mesh_sync_ops *ieee80211_mesh_sync_ops_get(u8 method)
+const struct ieee80211_mesh_sync_ops *ieee80211_mesh_sync_ops_get(u8 method)
 {
-	struct ieee80211_mesh_sync_ops *ops = NULL;
-	u8 i;
+	int i;
 
 	for (i = 0 ; i < ARRAY_SIZE(sync_methods); ++i) {
-		if (sync_methods[i].method == method) {
-			ops = &sync_methods[i].ops;
-			break;
-		}
+		if (sync_methods[i].method == method)
+			return &sync_methods[i].ops;
 	}
-	return ops;
+	return NULL;
 }