diff options
Diffstat (limited to 'net/mac80211/main.c')
| -rw-r--r-- | net/mac80211/main.c | 2365 |
1 files changed, 861 insertions, 1504 deletions
diff --git a/net/mac80211/main.c b/net/mac80211/main.c index aa5a191598c..d17c26d6e36 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -9,7 +9,6 @@ */ #include <net/mac80211.h> -#include <net/ieee80211_radiotap.h> #include <linux/module.h> #include <linux/init.h> #include <linux/netdevice.h> @@ -18,44 +17,26 @@ #include <linux/skbuff.h> #include <linux/etherdevice.h> #include <linux/if_arp.h> -#include <linux/wireless.h> #include <linux/rtnetlink.h> #include <linux/bitmap.h> +#include <linux/pm_qos.h> +#include <linux/inetdevice.h> #include <net/net_namespace.h> #include <net/cfg80211.h> +#include <net/addrconf.h> #include "ieee80211_i.h" +#include "driver-ops.h" #include "rate.h" #include "mesh.h" #include "wep.h" -#include "wme.h" -#include "aes_ccm.h" #include "led.h" #include "cfg.h" #include "debugfs.h" -#include "debugfs_netdev.h" -/* - * For seeing transmitted packets on monitor interfaces - * we have a radiotap header too. - */ -struct ieee80211_tx_status_rtap_hdr { - struct ieee80211_radiotap_header hdr; - __le16 tx_flags; - u8 data_retries; -} __attribute__ ((packed)); - -/* common interface routines */ - -static int header_parse_80211(const struct sk_buff *skb, unsigned char *haddr) -{ - memcpy(haddr, skb_mac_header(skb) + 10, ETH_ALEN); /* addr2 */ - return ETH_ALEN; -} - -/* must be called under mdev tx lock */ -static void ieee80211_configure_filter(struct ieee80211_local *local) +void ieee80211_configure_filter(struct ieee80211_local *local) { + u64 mc; unsigned int changed_flags; unsigned int new_flags = 0; @@ -65,9 +46,13 @@ static void ieee80211_configure_filter(struct ieee80211_local *local) if (atomic_read(&local->iff_allmultis)) new_flags |= FIF_ALLMULTI; - if (local->monitors) + if (local->monitors || test_bit(SCAN_SW_SCANNING, &local->scanning) || + test_bit(SCAN_ONCHANNEL_SCANNING, &local->scanning)) new_flags |= FIF_BCN_PRBRESP_PROMISC; + if (local->fif_probe_req || local->probe_req_reg) + new_flags |= FIF_PROBE_REQ; + if (local->fif_fcsfail) new_flags |= FIF_FCSFAIL; @@ -80,1071 +65,135 @@ static void ieee80211_configure_filter(struct ieee80211_local *local) if (local->fif_other_bss) new_flags |= FIF_OTHER_BSS; + if (local->fif_pspoll) + new_flags |= FIF_PSPOLL; + + spin_lock_bh(&local->filter_lock); changed_flags = local->filter_flags ^ new_flags; + mc = drv_prepare_multicast(local, &local->mc_list); + spin_unlock_bh(&local->filter_lock); + /* be a bit nasty */ new_flags |= (1<<31); - local->ops->configure_filter(local_to_hw(local), - changed_flags, &new_flags, - local->mdev->mc_count, - local->mdev->mc_list); + drv_configure_filter(local, changed_flags, &new_flags, mc); WARN_ON(new_flags & (1<<31)); local->filter_flags = new_flags & ~(1<<31); } -/* master interface */ - -static int ieee80211_master_open(struct net_device *dev) -{ - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_sub_if_data *sdata; - int res = -EOPNOTSUPP; - - /* we hold the RTNL here so can safely walk the list */ - list_for_each_entry(sdata, &local->interfaces, list) { - if (netif_running(sdata->dev)) { - res = 0; - break; - } - } - - if (res) - return res; - - netif_tx_start_all_queues(local->mdev); - - return 0; -} - -static int ieee80211_master_stop(struct net_device *dev) +static void ieee80211_reconfig_filter(struct work_struct *work) { - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_sub_if_data *sdata; - - /* we hold the RTNL here so can safely walk the list */ - list_for_each_entry(sdata, &local->interfaces, list) - if (netif_running(sdata->dev)) - dev_close(sdata->dev); - - return 0; -} - -static void ieee80211_master_set_multicast_list(struct net_device *dev) -{ - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct ieee80211_local *local = + container_of(work, struct ieee80211_local, reconfig_filter); ieee80211_configure_filter(local); } -/* regular interfaces */ - -static int ieee80211_change_mtu(struct net_device *dev, int new_mtu) +static u32 ieee80211_hw_conf_chan(struct ieee80211_local *local) { - int meshhdrlen; - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); - - meshhdrlen = (sdata->vif.type == IEEE80211_IF_TYPE_MESH_POINT) ? 5 : 0; - - /* FIX: what would be proper limits for MTU? - * This interface uses 802.3 frames. */ - if (new_mtu < 256 || - new_mtu > IEEE80211_MAX_DATA_LEN - 24 - 6 - meshhdrlen) { - return -EINVAL; - } - -#ifdef CONFIG_MAC80211_VERBOSE_DEBUG - printk(KERN_DEBUG "%s: setting MTU %d\n", dev->name, new_mtu); -#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */ - dev->mtu = new_mtu; - return 0; -} - -static inline int identical_mac_addr_allowed(int type1, int type2) -{ - return (type1 == IEEE80211_IF_TYPE_MNTR || - type2 == IEEE80211_IF_TYPE_MNTR || - (type1 == IEEE80211_IF_TYPE_AP && - type2 == IEEE80211_IF_TYPE_WDS) || - (type1 == IEEE80211_IF_TYPE_WDS && - (type2 == IEEE80211_IF_TYPE_WDS || - type2 == IEEE80211_IF_TYPE_AP)) || - (type1 == IEEE80211_IF_TYPE_AP && - type2 == IEEE80211_IF_TYPE_VLAN) || - (type1 == IEEE80211_IF_TYPE_VLAN && - (type2 == IEEE80211_IF_TYPE_AP || - type2 == IEEE80211_IF_TYPE_VLAN))); -} - -static int ieee80211_open(struct net_device *dev) -{ - struct ieee80211_sub_if_data *sdata, *nsdata; - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct sta_info *sta; - struct ieee80211_if_init_conf conf; + struct ieee80211_sub_if_data *sdata; + struct cfg80211_chan_def chandef = {}; u32 changed = 0; - int res; - bool need_hw_reconfig = 0; - - sdata = IEEE80211_DEV_TO_SUB_IF(dev); - - /* we hold the RTNL here so can safely walk the list */ - list_for_each_entry(nsdata, &local->interfaces, list) { - struct net_device *ndev = nsdata->dev; - - if (ndev != dev && netif_running(ndev)) { - /* - * Allow only a single IBSS interface to be up at any - * time. This is restricted because beacon distribution - * cannot work properly if both are in the same IBSS. - * - * To remove this restriction we'd have to disallow them - * from setting the same SSID on different IBSS interfaces - * belonging to the same hardware. Then, however, we're - * faced with having to adopt two different TSF timers... - */ - if (sdata->vif.type == IEEE80211_IF_TYPE_IBSS && - nsdata->vif.type == IEEE80211_IF_TYPE_IBSS) - return -EBUSY; - - /* - * The remaining checks are only performed for interfaces - * with the same MAC address. - */ - if (compare_ether_addr(dev->dev_addr, ndev->dev_addr)) - continue; - - /* - * check whether it may have the same address - */ - if (!identical_mac_addr_allowed(sdata->vif.type, - nsdata->vif.type)) - return -ENOTUNIQ; - - /* - * can only add VLANs to enabled APs - */ - if (sdata->vif.type == IEEE80211_IF_TYPE_VLAN && - nsdata->vif.type == IEEE80211_IF_TYPE_AP) - sdata->bss = &nsdata->u.ap; - } - } - - switch (sdata->vif.type) { - case IEEE80211_IF_TYPE_WDS: - if (!is_valid_ether_addr(sdata->u.wds.remote_addr)) - return -ENOLINK; - break; - case IEEE80211_IF_TYPE_VLAN: - if (!sdata->bss) - return -ENOLINK; - list_add(&sdata->u.vlan.list, &sdata->bss->vlans); - break; - case IEEE80211_IF_TYPE_AP: - sdata->bss = &sdata->u.ap; - break; - case IEEE80211_IF_TYPE_MESH_POINT: - /* mesh ifaces must set allmulti to forward mcast traffic */ - atomic_inc(&local->iff_allmultis); - break; - case IEEE80211_IF_TYPE_STA: - case IEEE80211_IF_TYPE_MNTR: - case IEEE80211_IF_TYPE_IBSS: - /* no special treatment */ - break; - case IEEE80211_IF_TYPE_INVALID: - /* cannot happen */ - WARN_ON(1); - break; - } + int power; + u32 offchannel_flag; - if (local->open_count == 0) { - res = 0; - if (local->ops->start) - res = local->ops->start(local_to_hw(local)); - if (res) - goto err_del_bss; - need_hw_reconfig = 1; - ieee80211_led_radio(local, local->hw.conf.radio_enabled); - } - - switch (sdata->vif.type) { - case IEEE80211_IF_TYPE_VLAN: - /* no need to tell driver */ - break; - case IEEE80211_IF_TYPE_MNTR: - if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) { - local->cooked_mntrs++; - break; - } - - /* must be before the call to ieee80211_configure_filter */ - local->monitors++; - if (local->monitors == 1) - local->hw.conf.flags |= IEEE80211_CONF_RADIOTAP; - - if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL) - local->fif_fcsfail++; - if (sdata->u.mntr_flags & MONITOR_FLAG_PLCPFAIL) - local->fif_plcpfail++; - if (sdata->u.mntr_flags & MONITOR_FLAG_CONTROL) - local->fif_control++; - if (sdata->u.mntr_flags & MONITOR_FLAG_OTHER_BSS) - local->fif_other_bss++; - - netif_addr_lock_bh(local->mdev); - ieee80211_configure_filter(local); - netif_addr_unlock_bh(local->mdev); - break; - case IEEE80211_IF_TYPE_STA: - case IEEE80211_IF_TYPE_IBSS: - sdata->u.sta.flags &= ~IEEE80211_STA_PREV_BSSID_SET; - /* fall through */ - default: - conf.vif = &sdata->vif; - conf.type = sdata->vif.type; - conf.mac_addr = dev->dev_addr; - res = local->ops->add_interface(local_to_hw(local), &conf); - if (res) - goto err_stop; - - if (ieee80211_vif_is_mesh(&sdata->vif)) - ieee80211_start_mesh(sdata->dev); - changed |= ieee80211_reset_erp_info(dev); - ieee80211_bss_info_change_notify(sdata, changed); - ieee80211_enable_keys(sdata); - - if (sdata->vif.type == IEEE80211_IF_TYPE_STA && - !(sdata->flags & IEEE80211_SDATA_USERSPACE_MLME)) - netif_carrier_off(dev); - else - netif_carrier_on(dev); - } - - if (sdata->vif.type == IEEE80211_IF_TYPE_WDS) { - /* Create STA entry for the WDS peer */ - sta = sta_info_alloc(sdata, sdata->u.wds.remote_addr, - GFP_KERNEL); - if (!sta) { - res = -ENOMEM; - goto err_del_interface; - } - - /* no locking required since STA is not live yet */ - sta->flags |= WLAN_STA_AUTHORIZED; - - res = sta_info_insert(sta); - if (res) { - /* STA has been freed */ - goto err_del_interface; - } - } - - if (local->open_count == 0) { - res = dev_open(local->mdev); - WARN_ON(res); - if (res) - goto err_del_interface; - tasklet_enable(&local->tx_pending_tasklet); - tasklet_enable(&local->tasklet); - } - - /* - * set_multicast_list will be invoked by the networking core - * which will check whether any increments here were done in - * error and sync them down to the hardware as filter flags. - */ - if (sdata->flags & IEEE80211_SDATA_ALLMULTI) - atomic_inc(&local->iff_allmultis); + offchannel_flag = local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL; - if (sdata->flags & IEEE80211_SDATA_PROMISC) - atomic_inc(&local->iff_promiscs); - - local->open_count++; - if (need_hw_reconfig) - ieee80211_hw_config(local); - - /* - * ieee80211_sta_work is disabled while network interface - * is down. Therefore, some configuration changes may not - * yet be effective. Trigger execution of ieee80211_sta_work - * to fix this. - */ - if (sdata->vif.type == IEEE80211_IF_TYPE_STA || - sdata->vif.type == IEEE80211_IF_TYPE_IBSS) { - struct ieee80211_if_sta *ifsta = &sdata->u.sta; - queue_work(local->hw.workqueue, &ifsta->work); - } - - netif_tx_start_all_queues(dev); - - return 0; - err_del_interface: - local->ops->remove_interface(local_to_hw(local), &conf); - err_stop: - if (!local->open_count && local->ops->stop) - local->ops->stop(local_to_hw(local)); - err_del_bss: - sdata->bss = NULL; - if (sdata->vif.type == IEEE80211_IF_TYPE_VLAN) - list_del(&sdata->u.vlan.list); - return res; -} - -static int ieee80211_stop(struct net_device *dev) -{ - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); - struct ieee80211_local *local = sdata->local; - struct ieee80211_if_init_conf conf; - struct sta_info *sta; - - /* - * Stop TX on this interface first. - */ - netif_tx_stop_all_queues(dev); - - /* - * Now delete all active aggregation sessions. - */ - rcu_read_lock(); - - list_for_each_entry_rcu(sta, &local->sta_list, list) { - if (sta->sdata == sdata) - ieee80211_sta_tear_down_BA_sessions(dev, sta->addr); - } - - rcu_read_unlock(); - - /* - * Remove all stations associated with this interface. - * - * This must be done before calling ops->remove_interface() - * because otherwise we can later invoke ops->sta_notify() - * whenever the STAs are removed, and that invalidates driver - * assumptions about always getting a vif pointer that is valid - * (because if we remove a STA after ops->remove_interface() - * the driver will have removed the vif info already!) - * - * We could relax this and only unlink the stations from the - * hash table and list but keep them on a per-sdata list that - * will be inserted back again when the interface is brought - * up again, but I don't currently see a use case for that, - * except with WDS which gets a STA entry created when it is - * brought up. - */ - sta_info_flush(local, sdata); - - /* - * Don't count this interface for promisc/allmulti while it - * is down. dev_mc_unsync() will invoke set_multicast_list - * on the master interface which will sync these down to the - * hardware as filter flags. - */ - if (sdata->flags & IEEE80211_SDATA_ALLMULTI) - atomic_dec(&local->iff_allmultis); - - if (sdata->flags & IEEE80211_SDATA_PROMISC) - atomic_dec(&local->iff_promiscs); + if (local->scan_chandef.chan) { + chandef = local->scan_chandef; + } else if (local->tmp_channel) { + chandef.chan = local->tmp_channel; + chandef.width = NL80211_CHAN_WIDTH_20_NOHT; + chandef.center_freq1 = chandef.chan->center_freq; + } else + chandef = local->_oper_chandef; - dev_mc_unsync(local->mdev, dev); + WARN(!cfg80211_chandef_valid(&chandef), + "control:%d MHz width:%d center: %d/%d MHz", + chandef.chan->center_freq, chandef.width, + chandef.center_freq1, chandef.center_freq2); - /* APs need special treatment */ - if (sdata->vif.type == IEEE80211_IF_TYPE_AP) { - struct ieee80211_sub_if_data *vlan, *tmp; - struct beacon_data *old_beacon = sdata->u.ap.beacon; + if (!cfg80211_chandef_identical(&chandef, &local->_oper_chandef)) + local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL; + else + local->hw.conf.flags &= ~IEEE80211_CONF_OFFCHANNEL; - /* remove beacon */ - rcu_assign_pointer(sdata->u.ap.beacon, NULL); - synchronize_rcu(); - kfree(old_beacon); + offchannel_flag ^= local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL; - /* down all dependent devices, that is VLANs */ - list_for_each_entry_safe(vlan, tmp, &sdata->u.ap.vlans, - u.vlan.list) - dev_close(vlan->dev); - WARN_ON(!list_empty(&sdata->u.ap.vlans)); + if (offchannel_flag || + !cfg80211_chandef_identical(&local->hw.conf.chandef, + &local->_oper_chandef)) { + local->hw.conf.chandef = chandef; + changed |= IEEE80211_CONF_CHANGE_CHANNEL; } - local->open_count--; - - switch (sdata->vif.type) { - case IEEE80211_IF_TYPE_VLAN: - list_del(&sdata->u.vlan.list); - /* no need to tell driver */ - break; - case IEEE80211_IF_TYPE_MNTR: - if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) { - local->cooked_mntrs--; - break; - } - - local->monitors--; - if (local->monitors == 0) - local->hw.conf.flags &= ~IEEE80211_CONF_RADIOTAP; - - if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL) - local->fif_fcsfail--; - if (sdata->u.mntr_flags & MONITOR_FLAG_PLCPFAIL) - local->fif_plcpfail--; - if (sdata->u.mntr_flags & MONITOR_FLAG_CONTROL) - local->fif_control--; - if (sdata->u.mntr_flags & MONITOR_FLAG_OTHER_BSS) - local->fif_other_bss--; - - netif_addr_lock_bh(local->mdev); - ieee80211_configure_filter(local); - netif_addr_unlock_bh(local->mdev); - break; - case IEEE80211_IF_TYPE_MESH_POINT: - /* allmulti is always set on mesh ifaces */ - atomic_dec(&local->iff_allmultis); - /* fall through */ - case IEEE80211_IF_TYPE_STA: - case IEEE80211_IF_TYPE_IBSS: - sdata->u.sta.state = IEEE80211_DISABLED; - memset(sdata->u.sta.bssid, 0, ETH_ALEN); - del_timer_sync(&sdata->u.sta.timer); + if (!conf_is_ht(&local->hw.conf)) { /* - * When we get here, the interface is marked down. - * Call synchronize_rcu() to wait for the RX path - * should it be using the interface and enqueuing - * frames at this very time on another CPU. + * mac80211.h documents that this is only valid + * when the channel is set to an HT type, and + * that otherwise STATIC is used. */ - synchronize_rcu(); - skb_queue_purge(&sdata->u.sta.skb_queue); - - if (local->scan_dev == sdata->dev) { - if (!local->ops->hw_scan) { - local->sta_sw_scanning = 0; - cancel_delayed_work(&local->scan_work); - } else - local->sta_hw_scanning = 0; - } - - sdata->u.sta.flags &= ~IEEE80211_STA_PRIVACY_INVOKED; - kfree(sdata->u.sta.extra_ie); - sdata->u.sta.extra_ie = NULL; - sdata->u.sta.extra_ie_len = 0; - /* fall through */ - default: - conf.vif = &sdata->vif; - conf.type = sdata->vif.type; - conf.mac_addr = dev->dev_addr; - /* disable all keys for as long as this netdev is down */ - ieee80211_disable_keys(sdata); - local->ops->remove_interface(local_to_hw(local), &conf); + local->hw.conf.smps_mode = IEEE80211_SMPS_STATIC; + } else if (local->hw.conf.smps_mode != local->smps_mode) { + local->hw.conf.smps_mode = local->smps_mode; + changed |= IEEE80211_CONF_CHANGE_SMPS; } - sdata->bss = NULL; - - if (local->open_count == 0) { - if (netif_running(local->mdev)) - dev_close(local->mdev); - - if (local->ops->stop) - local->ops->stop(local_to_hw(local)); - - ieee80211_led_radio(local, 0); - - flush_workqueue(local->hw.workqueue); - - tasklet_disable(&local->tx_pending_tasklet); - tasklet_disable(&local->tasklet); - } - - return 0; -} - -int ieee80211_start_tx_ba_session(struct ieee80211_hw *hw, u8 *ra, u16 tid) -{ - struct ieee80211_local *local = hw_to_local(hw); - struct sta_info *sta; - struct ieee80211_sub_if_data *sdata; - u16 start_seq_num = 0; - u8 *state; - int ret; - DECLARE_MAC_BUF(mac); - - if (tid >= STA_TID_NUM) - return -EINVAL; - -#ifdef CONFIG_MAC80211_HT_DEBUG - printk(KERN_DEBUG "Open BA session requested for %s tid %u\n", - print_mac(mac, ra), tid); -#endif /* CONFIG_MAC80211_HT_DEBUG */ + power = ieee80211_chandef_max_power(&chandef); rcu_read_lock(); - - sta = sta_info_get(local, ra); - if (!sta) { -#ifdef CONFIG_MAC80211_HT_DEBUG - printk(KERN_DEBUG "Could not find the station\n"); -#endif - ret = -ENOENT; - goto exit; - } - - spin_lock_bh(&sta->lock); - - /* we have tried too many times, receiver does not want A-MPDU */ - if (sta->ampdu_mlme.addba_req_num[tid] > HT_AGG_MAX_RETRIES) { - ret = -EBUSY; - goto err_unlock_sta; - } - - state = &sta->ampdu_mlme.tid_state_tx[tid]; - /* check if the TID is not in aggregation flow already */ - if (*state != HT_AGG_STATE_IDLE) { -#ifdef CONFIG_MAC80211_HT_DEBUG - printk(KERN_DEBUG "BA request denied - session is not " - "idle on tid %u\n", tid); -#endif /* CONFIG_MAC80211_HT_DEBUG */ - ret = -EAGAIN; - goto err_unlock_sta; - } - - /* prepare A-MPDU MLME for Tx aggregation */ - sta->ampdu_mlme.tid_tx[tid] = - kmalloc(sizeof(struct tid_ampdu_tx), GFP_ATOMIC); - if (!sta->ampdu_mlme.tid_tx[tid]) { -#ifdef CONFIG_MAC80211_HT_DEBUG - if (net_ratelimit()) - printk(KERN_ERR "allocate tx mlme to tid %d failed\n", - tid); -#endif - ret = -ENOMEM; - goto err_unlock_sta; - } - /* Tx timer */ - sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer.function = - sta_addba_resp_timer_expired; - sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer.data = - (unsigned long)&sta->timer_to_tid[tid]; - init_timer(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer); - - /* create a new queue for this aggregation */ - ret = ieee80211_ht_agg_queue_add(local, sta, tid); - - /* case no queue is available to aggregation - * don't switch to aggregation */ - if (ret) { -#ifdef CONFIG_MAC80211_HT_DEBUG - printk(KERN_DEBUG "BA request denied - queue unavailable for" - " tid %d\n", tid); -#endif /* CONFIG_MAC80211_HT_DEBUG */ - goto err_unlock_queue; - } - sdata = sta->sdata; - - /* Ok, the Addba frame hasn't been sent yet, but if the driver calls the - * call back right away, it must see that the flow has begun */ - *state |= HT_ADDBA_REQUESTED_MSK; - - if (local->ops->ampdu_action) - ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_TX_START, - ra, tid, &start_seq_num); - - if (ret) { - /* No need to requeue the packets in the agg queue, since we - * held the tx lock: no packet could be enqueued to the newly - * allocated queue */ - ieee80211_ht_agg_queue_remove(local, sta, tid, 0); -#ifdef CONFIG_MAC80211_HT_DEBUG - printk(KERN_DEBUG "BA request denied - HW unavailable for" - " tid %d\n", tid); -#endif /* CONFIG_MAC80211_HT_DEBUG */ - *state = HT_AGG_STATE_IDLE; - goto err_unlock_queue; - } - - /* Will put all the packets in the new SW queue */ - ieee80211_requeue(local, ieee802_1d_to_ac[tid]); - spin_unlock_bh(&sta->lock); - - /* send an addBA request */ - sta->ampdu_mlme.dialog_token_allocator++; - sta->ampdu_mlme.tid_tx[tid]->dialog_token = - sta->ampdu_mlme.dialog_token_allocator; - sta->ampdu_mlme.tid_tx[tid]->ssn = start_seq_num; - - - ieee80211_send_addba_request(sta->sdata->dev, ra, tid, - sta->ampdu_mlme.tid_tx[tid]->dialog_token, - sta->ampdu_mlme.tid_tx[tid]->ssn, - 0x40, 5000); - /* activate the timer for the recipient's addBA response */ - sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer.expires = - jiffies + ADDBA_RESP_INTERVAL; - add_timer(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer); -#ifdef CONFIG_MAC80211_HT_DEBUG - printk(KERN_DEBUG "activated addBA response timer on tid %d\n", tid); -#endif - goto exit; - -err_unlock_queue: - kfree(sta->ampdu_mlme.tid_tx[tid]); - sta->ampdu_mlme.tid_tx[tid] = NULL; - ret = -EBUSY; -err_unlock_sta: - spin_unlock_bh(&sta->lock); -exit: - rcu_read_unlock(); - return ret; -} -EXPORT_SYMBOL(ieee80211_start_tx_ba_session); - -int ieee80211_stop_tx_ba_session(struct ieee80211_hw *hw, - u8 *ra, u16 tid, - enum ieee80211_back_parties initiator) -{ - struct ieee80211_local *local = hw_to_local(hw); - struct sta_info *sta; - u8 *state; - int ret = 0; - DECLARE_MAC_BUF(mac); - - if (tid >= STA_TID_NUM) - return -EINVAL; - - rcu_read_lock(); - sta = sta_info_get(local, ra); - if (!sta) { - rcu_read_unlock(); - return -ENOENT; - } - - /* check if the TID is in aggregation */ - state = &sta->ampdu_mlme.tid_state_tx[tid]; - spin_lock_bh(&sta->lock); - - if (*state != HT_AGG_STATE_OPERATIONAL) { - ret = -ENOENT; - goto stop_BA_exit; - } - -#ifdef CONFIG_MAC80211_HT_DEBUG - printk(KERN_DEBUG "Tx BA session stop requested for %s tid %u\n", - print_mac(mac, ra), tid); -#endif /* CONFIG_MAC80211_HT_DEBUG */ - - ieee80211_stop_queue(hw, sta->tid_to_tx_q[tid]); - - *state = HT_AGG_STATE_REQ_STOP_BA_MSK | - (initiator << HT_AGG_STATE_INITIATOR_SHIFT); - - if (local->ops->ampdu_action) - ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_TX_STOP, - ra, tid, NULL); - - /* case HW denied going back to legacy */ - if (ret) { - WARN_ON(ret != -EBUSY); - *state = HT_AGG_STATE_OPERATIONAL; - ieee80211_wake_queue(hw, sta->tid_to_tx_q[tid]); - goto stop_BA_exit; - } - -stop_BA_exit: - spin_unlock_bh(&sta->lock); - rcu_read_unlock(); - return ret; -} -EXPORT_SYMBOL(ieee80211_stop_tx_ba_session); - -void ieee80211_start_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u16 tid) -{ - struct ieee80211_local *local = hw_to_local(hw); - struct sta_info *sta; - u8 *state; - DECLARE_MAC_BUF(mac); - - if (tid >= STA_TID_NUM) { -#ifdef CONFIG_MAC80211_HT_DEBUG - printk(KERN_DEBUG "Bad TID value: tid = %d (>= %d)\n", - tid, STA_TID_NUM); -#endif - return; - } - - rcu_read_lock(); - sta = sta_info_get(local, ra); - if (!sta) { - rcu_read_unlock(); -#ifdef CONFIG_MAC80211_HT_DEBUG - printk(KERN_DEBUG "Could not find station: %s\n", - print_mac(mac, ra)); -#endif - return; - } - - state = &sta->ampdu_mlme.tid_state_tx[tid]; - spin_lock_bh(&sta->lock); - - if (!(*state & HT_ADDBA_REQUESTED_MSK)) { -#ifdef CONFIG_MAC80211_HT_DEBUG - printk(KERN_DEBUG "addBA was not requested yet, state is %d\n", - *state); -#endif - spin_unlock_bh(&sta->lock); - rcu_read_unlock(); - return; - } - - WARN_ON_ONCE(*state & HT_ADDBA_DRV_READY_MSK); - - *state |= HT_ADDBA_DRV_READY_MSK; - - if (*state == HT_AGG_STATE_OPERATIONAL) { -#ifdef CONFIG_MAC80211_HT_DEBUG - printk(KERN_DEBUG "Aggregation is on for tid %d \n", tid); -#endif - ieee80211_wake_queue(hw, sta->tid_to_tx_q[tid]); - } - spin_unlock_bh(&sta->lock); - rcu_read_unlock(); -} -EXPORT_SYMBOL(ieee80211_start_tx_ba_cb); - -void ieee80211_stop_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u8 tid) -{ - struct ieee80211_local *local = hw_to_local(hw); - struct sta_info *sta; - u8 *state; - int agg_queue; - DECLARE_MAC_BUF(mac); - - if (tid >= STA_TID_NUM) { -#ifdef CONFIG_MAC80211_HT_DEBUG - printk(KERN_DEBUG "Bad TID value: tid = %d (>= %d)\n", - tid, STA_TID_NUM); -#endif - return; - } - -#ifdef CONFIG_MAC80211_HT_DEBUG - printk(KERN_DEBUG "Stopping Tx BA session for %s tid %d\n", - print_mac(mac, ra), tid); -#endif /* CONFIG_MAC80211_HT_DEBUG */ - - rcu_read_lock(); - sta = sta_info_get(local, ra); - if (!sta) { -#ifdef CONFIG_MAC80211_HT_DEBUG - printk(KERN_DEBUG "Could not find station: %s\n", - print_mac(mac, ra)); -#endif - rcu_read_unlock(); - return; - } - state = &sta->ampdu_mlme.tid_state_tx[tid]; - - /* NOTE: no need to use sta->lock in this state check, as - * ieee80211_stop_tx_ba_session will let only one stop call to - * pass through per sta/tid - */ - if ((*state & HT_AGG_STATE_REQ_STOP_BA_MSK) == 0) { -#ifdef CONFIG_MAC80211_HT_DEBUG - printk(KERN_DEBUG "unexpected callback to A-MPDU stop\n"); -#endif - rcu_read_unlock(); - return; + list_for_each_entry_rcu(sdata, &local->interfaces, list) { + if (!rcu_access_pointer(sdata->vif.chanctx_conf)) + continue; + if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) + continue; + power = min(power, sdata->vif.bss_conf.txpower); } - - if (*state & HT_AGG_STATE_INITIATOR_MSK) - ieee80211_send_delba(sta->sdata->dev, ra, tid, - WLAN_BACK_INITIATOR, WLAN_REASON_QSTA_NOT_USE); - - agg_queue = sta->tid_to_tx_q[tid]; - - ieee80211_ht_agg_queue_remove(local, sta, tid, 1); - - /* We just requeued the all the frames that were in the - * removed queue, and since we might miss a softirq we do - * netif_schedule_queue. ieee80211_wake_queue is not used - * here as this queue is not necessarily stopped - */ - netif_schedule_queue(netdev_get_tx_queue(local->mdev, agg_queue)); - spin_lock_bh(&sta->lock); - *state = HT_AGG_STATE_IDLE; - sta->ampdu_mlme.addba_req_num[tid] = 0; - kfree(sta->ampdu_mlme.tid_tx[tid]); - sta->ampdu_mlme.tid_tx[tid] = NULL; - spin_unlock_bh(&sta->lock); - rcu_read_unlock(); -} -EXPORT_SYMBOL(ieee80211_stop_tx_ba_cb); - -void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, - const u8 *ra, u16 tid) -{ - struct ieee80211_local *local = hw_to_local(hw); - struct ieee80211_ra_tid *ra_tid; - struct sk_buff *skb = dev_alloc_skb(0); - - if (unlikely(!skb)) { -#ifdef CONFIG_MAC80211_HT_DEBUG - if (net_ratelimit()) - printk(KERN_WARNING "%s: Not enough memory, " - "dropping start BA session", skb->dev->name); -#endif - return; - } - ra_tid = (struct ieee80211_ra_tid *) &skb->cb; - memcpy(&ra_tid->ra, ra, ETH_ALEN); - ra_tid->tid = tid; - - skb->pkt_type = IEEE80211_ADDBA_MSG; - skb_queue_tail(&local->skb_queue, skb); - tasklet_schedule(&local->tasklet); -} -EXPORT_SYMBOL(ieee80211_start_tx_ba_cb_irqsafe); - -void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, - const u8 *ra, u16 tid) -{ - struct ieee80211_local *local = hw_to_local(hw); - struct ieee80211_ra_tid *ra_tid; - struct sk_buff *skb = dev_alloc_skb(0); - - if (unlikely(!skb)) { -#ifdef CONFIG_MAC80211_HT_DEBUG - if (net_ratelimit()) - printk(KERN_WARNING "%s: Not enough memory, " - "dropping stop BA session", skb->dev->name); -#endif - return; - } - ra_tid = (struct ieee80211_ra_tid *) &skb->cb; - memcpy(&ra_tid->ra, ra, ETH_ALEN); - ra_tid->tid = tid; - - skb->pkt_type = IEEE80211_DELBA_MSG; - skb_queue_tail(&local->skb_queue, skb); - tasklet_schedule(&local->tasklet); -} -EXPORT_SYMBOL(ieee80211_stop_tx_ba_cb_irqsafe); - -static void ieee80211_set_multicast_list(struct net_device *dev) -{ - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); - int allmulti, promisc, sdata_allmulti, sdata_promisc; - - allmulti = !!(dev->flags & IFF_ALLMULTI); - promisc = !!(dev->flags & IFF_PROMISC); - sdata_allmulti = !!(sdata->flags & IEEE80211_SDATA_ALLMULTI); - sdata_promisc = !!(sdata->flags & IEEE80211_SDATA_PROMISC); - - if (allmulti != sdata_allmulti) { - if (dev->flags & IFF_ALLMULTI) - atomic_inc(&local->iff_allmultis); - else - atomic_dec(&local->iff_allmultis); - sdata->flags ^= IEEE80211_SDATA_ALLMULTI; - } - - if (promisc != sdata_promisc) { - if (dev->flags & IFF_PROMISC) - atomic_inc(&local->iff_promiscs); - else - atomic_dec(&local->iff_promiscs); - sdata->flags ^= IEEE80211_SDATA_PROMISC; - } - dev_mc_sync(local->mdev, dev); -} - -static const struct header_ops ieee80211_header_ops = { - .create = eth_header, - .parse = header_parse_80211, - .rebuild = eth_rebuild_header, - .cache = eth_header_cache, - .cache_update = eth_header_cache_update, -}; - -void ieee80211_if_setup(struct net_device *dev) -{ - ether_setup(dev); - dev->hard_start_xmit = ieee80211_subif_start_xmit; - dev->wireless_handlers = &ieee80211_iw_handler_def; - dev->set_multicast_list = ieee80211_set_multicast_list; - dev->change_mtu = ieee80211_change_mtu; - dev->open = ieee80211_open; - dev->stop = ieee80211_stop; - dev->destructor = free_netdev; -} - -/* everything else */ - -int ieee80211_if_config(struct ieee80211_sub_if_data *sdata, u32 changed) -{ - struct ieee80211_local *local = sdata->local; - struct ieee80211_if_conf conf; - - if (WARN_ON(!netif_running(sdata->dev))) - return 0; - - if (!local->ops->config_interface) - return 0; - - memset(&conf, 0, sizeof(conf)); - conf.changed = changed; - - if (sdata->vif.type == IEEE80211_IF_TYPE_STA || - sdata->vif.type == IEEE80211_IF_TYPE_IBSS) { - conf.bssid = sdata->u.sta.bssid; - conf.ssid = sdata->u.sta.ssid; - conf.ssid_len = sdata->u.sta.ssid_len; - } else if (sdata->vif.type == IEEE80211_IF_TYPE_AP) { - conf.bssid = sdata->dev->dev_addr; - conf.ssid = sdata->u.ap.ssid; - conf.ssid_len = sdata->u.ap.ssid_len; - } else if (ieee80211_vif_is_mesh(&sdata->vif)) { - u8 zero[ETH_ALEN] = { 0 }; - conf.bssid = zero; - conf.ssid = zero; - conf.ssid_len = 0; - } else { - WARN_ON(1); - return -EINVAL; + if (local->hw.conf.power_level != power) { + changed |= IEEE80211_CONF_CHANGE_POWER; + local->hw.conf.power_level = power; } - if (WARN_ON(!conf.bssid && (changed & IEEE80211_IFCC_BSSID))) - return -EINVAL; - - if (WARN_ON(!conf.ssid && (changed & IEEE80211_IFCC_SSID))) - return -EINVAL; - - return local->ops->config_interface(local_to_hw(local), - &sdata->vif, &conf); + return changed; } -int ieee80211_hw_config(struct ieee80211_local *local) +int ieee80211_hw_config(struct ieee80211_local *local, u32 changed) { - struct ieee80211_channel *chan; int ret = 0; - if (local->sta_sw_scanning) - chan = local->scan_channel; - else - chan = local->oper_channel; - - local->hw.conf.channel = chan; + might_sleep(); - if (!local->hw.conf.power_level) - local->hw.conf.power_level = chan->max_power; + if (!local->use_chanctx) + changed |= ieee80211_hw_conf_chan(local); else - local->hw.conf.power_level = min(chan->max_power, - local->hw.conf.power_level); - - local->hw.conf.max_antenna_gain = chan->max_antenna_gain; + changed &= ~(IEEE80211_CONF_CHANGE_CHANNEL | + IEEE80211_CONF_CHANGE_POWER); -#ifdef CONFIG_MAC80211_VERBOSE_DEBUG - printk(KERN_DEBUG "%s: HW CONFIG: freq=%d\n", - wiphy_name(local->hw.wiphy), chan->center_freq); -#endif - - if (local->open_count) - ret = local->ops->config(local_to_hw(local), &local->hw.conf); - - return ret; -} - -/** - * ieee80211_handle_ht should be used only after legacy configuration - * has been determined namely band, as ht configuration depends upon - * the hardware's HT abilities for a _specific_ band. - */ -u32 ieee80211_handle_ht(struct ieee80211_local *local, int enable_ht, - struct ieee80211_ht_info *req_ht_cap, - struct ieee80211_ht_bss_info *req_bss_cap) -{ - struct ieee80211_conf *conf = &local->hw.conf; - struct ieee80211_supported_band *sband; - struct ieee80211_ht_info ht_conf; - struct ieee80211_ht_bss_info ht_bss_conf; - u32 changed = 0; - int i; - u8 max_tx_streams = IEEE80211_HT_CAP_MAX_STREAMS; - u8 tx_mcs_set_cap; - - sband = local->hw.wiphy->bands[conf->channel->band]; - - memset(&ht_conf, 0, sizeof(struct ieee80211_ht_info)); - memset(&ht_bss_conf, 0, sizeof(struct ieee80211_ht_bss_info)); - - /* HT is not supported */ - if (!sband->ht_info.ht_supported) { - conf->flags &= ~IEEE80211_CONF_SUPPORT_HT_MODE; - goto out; - } - - /* disable HT */ - if (!enable_ht) { - if (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) - changed |= BSS_CHANGED_HT; - conf->flags &= ~IEEE80211_CONF_SUPPORT_HT_MODE; - conf->ht_conf.ht_supported = 0; - goto out; + if (changed && local->open_count) { + ret = drv_config(local, changed); + /* + * Goal: + * HW reconfiguration should never fail, the driver has told + * us what it can support so it should live up to that promise. + * + * Current status: + * rfkill is not integrated with mac80211 and a + * configuration command can thus fail if hardware rfkill + * is enabled + * + * FIXME: integrate rfkill with mac80211 and then add this + * WARN_ON() back + * + */ + /* WARN_ON(ret); */ } - - if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE)) - changed |= BSS_CHANGED_HT; - - conf->flags |= IEEE80211_CONF_SUPPORT_HT_MODE; - ht_conf.ht_supported = 1; - - ht_conf.cap = req_ht_cap->cap & sband->ht_info.cap; - ht_conf.cap &= ~(IEEE80211_HT_CAP_MIMO_PS); - ht_conf.cap |= sband->ht_info.cap & IEEE80211_HT_CAP_MIMO_PS; - ht_bss_conf.primary_channel = req_bss_cap->primary_channel; - ht_bss_conf.bss_cap = req_bss_cap->bss_cap; - ht_bss_conf.bss_op_mode = req_bss_cap->bss_op_mode; - - ht_conf.ampdu_factor = req_ht_cap->ampdu_factor; - ht_conf.ampdu_density = req_ht_cap->ampdu_density; - - /* Bits 96-100 */ - tx_mcs_set_cap = sband->ht_info.supp_mcs_set[12]; - - /* configure suppoerted Tx MCS according to requested MCS - * (based in most cases on Rx capabilities of peer) and self - * Tx MCS capabilities (as defined by low level driver HW - * Tx capabilities) */ - if (!(tx_mcs_set_cap & IEEE80211_HT_CAP_MCS_TX_DEFINED)) - goto check_changed; - - /* Counting from 0 therfore + 1 */ - if (tx_mcs_set_cap & IEEE80211_HT_CAP_MCS_TX_RX_DIFF) - max_tx_streams = ((tx_mcs_set_cap & - IEEE80211_HT_CAP_MCS_TX_STREAMS) >> 2) + 1; - - for (i = 0; i < max_tx_streams; i++) - ht_conf.supp_mcs_set[i] = - sband->ht_info.supp_mcs_set[i] & - req_ht_cap->supp_mcs_set[i]; - - if (tx_mcs_set_cap & IEEE80211_HT_CAP_MCS_TX_UEQM) - for (i = IEEE80211_SUPP_MCS_SET_UEQM; - i < IEEE80211_SUPP_MCS_SET_LEN; i++) - ht_conf.supp_mcs_set[i] = - sband->ht_info.supp_mcs_set[i] & - req_ht_cap->supp_mcs_set[i]; - -check_changed: - /* if bss configuration changed store the new one */ - if (memcmp(&conf->ht_conf, &ht_conf, sizeof(ht_conf)) || - memcmp(&conf->ht_bss_conf, &ht_bss_conf, sizeof(ht_bss_conf))) { - changed |= BSS_CHANGED_HT; - memcpy(&conf->ht_conf, &ht_conf, sizeof(ht_conf)); - memcpy(&conf->ht_bss_conf, &ht_bss_conf, sizeof(ht_bss_conf)); - } -out: - return changed; + return ret; } void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata, @@ -1152,389 +201,309 @@ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata, { struct ieee80211_local *local = sdata->local; - if (!changed) + if (!changed || sdata->vif.type == NL80211_IFTYPE_AP_VLAN) return; - if (local->ops->bss_info_changed) - local->ops->bss_info_changed(local_to_hw(local), - &sdata->vif, - &sdata->bss_conf, - changed); + drv_bss_info_changed(local, sdata, &sdata->vif.bss_conf, changed); } -u32 ieee80211_reset_erp_info(struct net_device *dev) +u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata) { - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); - - sdata->bss_conf.use_cts_prot = 0; - sdata->bss_conf.use_short_preamble = 0; - return BSS_CHANGED_ERP_CTS_PROT | BSS_CHANGED_ERP_PREAMBLE; + sdata->vif.bss_conf.use_cts_prot = false; + sdata->vif.bss_conf.use_short_preamble = false; + sdata->vif.bss_conf.use_short_slot = false; + return BSS_CHANGED_ERP_CTS_PROT | + BSS_CHANGED_ERP_PREAMBLE | + BSS_CHANGED_ERP_SLOT; } -void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw, - struct sk_buff *skb) -{ - struct ieee80211_local *local = hw_to_local(hw); - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - int tmp; - - skb->dev = local->mdev; - skb->pkt_type = IEEE80211_TX_STATUS_MSG; - skb_queue_tail(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS ? - &local->skb_queue : &local->skb_queue_unreliable, skb); - tmp = skb_queue_len(&local->skb_queue) + - skb_queue_len(&local->skb_queue_unreliable); - while (tmp > IEEE80211_IRQSAFE_QUEUE_LIMIT && - (skb = skb_dequeue(&local->skb_queue_unreliable))) { - dev_kfree_skb_irq(skb); - tmp--; - I802_DEBUG_INC(local->tx_status_drop); - } - tasklet_schedule(&local->tasklet); -} -EXPORT_SYMBOL(ieee80211_tx_status_irqsafe); - static void ieee80211_tasklet_handler(unsigned long data) { struct ieee80211_local *local = (struct ieee80211_local *) data; struct sk_buff *skb; - struct ieee80211_rx_status rx_status; - struct ieee80211_ra_tid *ra_tid; while ((skb = skb_dequeue(&local->skb_queue)) || (skb = skb_dequeue(&local->skb_queue_unreliable))) { switch (skb->pkt_type) { case IEEE80211_RX_MSG: - /* status is in skb->cb */ - memcpy(&rx_status, skb->cb, sizeof(rx_status)); /* Clear skb->pkt_type in order to not confuse kernel * netstack. */ skb->pkt_type = 0; - __ieee80211_rx(local_to_hw(local), skb, &rx_status); + ieee80211_rx(&local->hw, skb); break; case IEEE80211_TX_STATUS_MSG: skb->pkt_type = 0; - ieee80211_tx_status(local_to_hw(local), skb); - break; - case IEEE80211_DELBA_MSG: - ra_tid = (struct ieee80211_ra_tid *) &skb->cb; - ieee80211_stop_tx_ba_cb(local_to_hw(local), - ra_tid->ra, ra_tid->tid); - dev_kfree_skb(skb); + ieee80211_tx_status(&local->hw, skb); break; - case IEEE80211_ADDBA_MSG: - ra_tid = (struct ieee80211_ra_tid *) &skb->cb; - ieee80211_start_tx_ba_cb(local_to_hw(local), - ra_tid->ra, ra_tid->tid); - dev_kfree_skb(skb); - break ; default: - WARN_ON(1); + WARN(1, "mac80211: Packet is of unknown type %d\n", + skb->pkt_type); dev_kfree_skb(skb); break; } } } -/* Remove added headers (e.g., QoS control), encryption header/MIC, etc. to - * make a prepared TX frame (one that has been given to hw) to look like brand - * new IEEE 802.11 frame that is ready to go through TX processing again. - */ -static void ieee80211_remove_tx_extra(struct ieee80211_local *local, - struct ieee80211_key *key, - struct sk_buff *skb) +static void ieee80211_restart_work(struct work_struct *work) { - int hdrlen, iv_len, mic_len; - - hdrlen = ieee80211_get_hdrlen_from_skb(skb); - - if (!key) - goto no_key; - - switch (key->conf.alg) { - case ALG_WEP: - iv_len = WEP_IV_LEN; - mic_len = WEP_ICV_LEN; - break; - case ALG_TKIP: - iv_len = TKIP_IV_LEN; - mic_len = TKIP_ICV_LEN; - break; - case ALG_CCMP: - iv_len = CCMP_HDR_LEN; - mic_len = CCMP_MIC_LEN; - break; - default: - goto no_key; - } + struct ieee80211_local *local = + container_of(work, struct ieee80211_local, restart_work); - if (skb->len >= mic_len && - !(key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE)) - skb_trim(skb, skb->len - mic_len); - if (skb->len >= iv_len && skb->len > hdrlen) { - memmove(skb->data + iv_len, skb->data, hdrlen); - skb_pull(skb, iv_len); - } + /* wait for scan work complete */ + flush_workqueue(local->workqueue); -no_key: - { - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; - u16 fc = le16_to_cpu(hdr->frame_control); - if ((fc & 0x8C) == 0x88) /* QoS Control Field */ { - fc &= ~IEEE80211_STYPE_QOS_DATA; - hdr->frame_control = cpu_to_le16(fc); - memmove(skb->data + 2, skb->data, hdrlen - 2); - skb_pull(skb, 2); - } - } + WARN(test_bit(SCAN_HW_SCANNING, &local->scanning), + "%s called with hardware scan in progress\n", __func__); + + rtnl_lock(); + ieee80211_scan_cancel(local); + ieee80211_reconfig(local); + rtnl_unlock(); } -static void ieee80211_handle_filtered_frame(struct ieee80211_local *local, - struct sta_info *sta, - struct sk_buff *skb) +void ieee80211_restart_hw(struct ieee80211_hw *hw) { - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ieee80211_local *local = hw_to_local(hw); - sta->tx_filtered_count++; + trace_api_restart_hw(local); - /* - * Clear the TX filter mask for this STA when sending the next - * packet. If the STA went to power save mode, this will happen - * when it wakes up for the next time. - */ - set_sta_flags(sta, WLAN_STA_CLEAR_PS_FILT); + wiphy_info(hw->wiphy, + "Hardware restart was requested\n"); + + /* use this reason, ieee80211_reconfig will unblock it */ + ieee80211_stop_queues_by_reason(hw, IEEE80211_MAX_QUEUE_MAP, + IEEE80211_QUEUE_STOP_REASON_SUSPEND); /* - * This code races in the following way: - * - * (1) STA sends frame indicating it will go to sleep and does so - * (2) hardware/firmware adds STA to filter list, passes frame up - * (3) hardware/firmware processes TX fifo and suppresses a frame - * (4) we get TX status before having processed the frame and - * knowing that the STA has gone to sleep. - * - * This is actually quite unlikely even when both those events are - * processed from interrupts coming in quickly after one another or - * even at the same time because we queue both TX status events and - * RX frames to be processed by a tasklet and process them in the - * same order that they were received or TX status last. Hence, there - * is no race as long as the frame RX is processed before the next TX - * status, which drivers can ensure, see below. - * - * Note that this can only happen if the hardware or firmware can - * actually add STAs to the filter list, if this is done by the - * driver in response to set_tim() (which will only reduce the race - * this whole filtering tries to solve, not completely solve it) - * this situation cannot happen. - * - * To completely solve this race drivers need to make sure that they - * (a) don't mix the irq-safe/not irq-safe TX status/RX processing - * functions and - * (b) always process RX events before TX status events if ordering - * can be unknown, for example with different interrupt status - * bits. + * Stop all Rx during the reconfig. We don't want state changes + * or driver callbacks while this is in progress. */ - if (test_sta_flags(sta, WLAN_STA_PS) && - skb_queue_len(&sta->tx_filtered) < STA_MAX_TX_BUFFER) { - ieee80211_remove_tx_extra(local, sta->key, skb); - skb_queue_tail(&sta->tx_filtered, skb); - return; - } + local->in_reconfig = true; + barrier(); - if (!test_sta_flags(sta, WLAN_STA_PS) && - !(info->flags & IEEE80211_TX_CTL_REQUEUE)) { - /* Software retry the packet once */ - info->flags |= IEEE80211_TX_CTL_REQUEUE; - ieee80211_remove_tx_extra(local, sta->key, skb); - dev_queue_xmit(skb); - return; - } - -#ifdef CONFIG_MAC80211_VERBOSE_DEBUG - if (net_ratelimit()) - printk(KERN_DEBUG "%s: dropped TX filtered frame, " - "queue_len=%d PS=%d @%lu\n", - wiphy_name(local->hw.wiphy), - skb_queue_len(&sta->tx_filtered), - !!test_sta_flags(sta, WLAN_STA_PS), jiffies); -#endif - dev_kfree_skb(skb); + schedule_work(&local->restart_work); } +EXPORT_SYMBOL(ieee80211_restart_hw); -void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb) +#ifdef CONFIG_INET +static int ieee80211_ifa_changed(struct notifier_block *nb, + unsigned long data, void *arg) { - struct sk_buff *skb2; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; - struct ieee80211_local *local = hw_to_local(hw); - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - u16 frag, type; - __le16 fc; - struct ieee80211_tx_status_rtap_hdr *rthdr; + struct in_ifaddr *ifa = arg; + struct ieee80211_local *local = + container_of(nb, struct ieee80211_local, + ifa_notifier); + struct net_device *ndev = ifa->ifa_dev->dev; + struct wireless_dev *wdev = ndev->ieee80211_ptr; + struct in_device *idev; struct ieee80211_sub_if_data *sdata; - struct net_device *prev_dev = NULL; - struct sta_info *sta; - - rcu_read_lock(); - - if (info->status.excessive_retries) { - sta = sta_info_get(local, hdr->addr1); - if (sta) { - if (test_sta_flags(sta, WLAN_STA_PS)) { - /* - * The STA is in power save mode, so assume - * that this TX packet failed because of that. - */ - ieee80211_handle_filtered_frame(local, sta, skb); - rcu_read_unlock(); - return; - } - } + struct ieee80211_bss_conf *bss_conf; + struct ieee80211_if_managed *ifmgd; + int c = 0; + + /* Make sure it's our interface that got changed */ + if (!wdev) + return NOTIFY_DONE; + + if (wdev->wiphy != local->hw.wiphy) + return NOTIFY_DONE; + + sdata = IEEE80211_DEV_TO_SUB_IF(ndev); + bss_conf = &sdata->vif.bss_conf; + + /* ARP filtering is only supported in managed mode */ + if (sdata->vif.type != NL80211_IFTYPE_STATION) + return NOTIFY_DONE; + + idev = __in_dev_get_rtnl(sdata->dev); + if (!idev) + return NOTIFY_DONE; + + ifmgd = &sdata->u.mgd; + sdata_lock(sdata); + + /* Copy the addresses to the bss_conf list */ + ifa = idev->ifa_list; + while (ifa) { + if (c < IEEE80211_BSS_ARP_ADDR_LIST_LEN) + bss_conf->arp_addr_list[c] = ifa->ifa_address; + ifa = ifa->ifa_next; + c++; } - fc = hdr->frame_control; - - if ((info->flags & IEEE80211_TX_STAT_AMPDU_NO_BACK) && - (ieee80211_is_data_qos(fc))) { - u16 tid, ssn; - u8 *qc; - sta = sta_info_get(local, hdr->addr1); - if (sta) { - qc = ieee80211_get_qos_ctl(hdr); - tid = qc[0] & 0xf; - ssn = ((le16_to_cpu(hdr->seq_ctrl) + 0x10) - & IEEE80211_SCTL_SEQ); - ieee80211_send_bar(sta->sdata->dev, hdr->addr1, - tid, ssn); - } - } + bss_conf->arp_addr_cnt = c; - if (info->flags & IEEE80211_TX_STAT_TX_FILTERED) { - sta = sta_info_get(local, hdr->addr1); - if (sta) { - ieee80211_handle_filtered_frame(local, sta, skb); - rcu_read_unlock(); - return; - } - } else - rate_control_tx_status(local->mdev, skb); + /* Configure driver only if associated (which also implies it is up) */ + if (ifmgd->associated) + ieee80211_bss_info_change_notify(sdata, + BSS_CHANGED_ARP_FILTER); - rcu_read_unlock(); + sdata_unlock(sdata); - ieee80211_led_tx(local, 0); - - /* SNMP counters - * Fragments are passed to low-level drivers as separate skbs, so these - * are actually fragments, not frames. Update frame counters only for - * the first fragment of the frame. */ - - frag = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG; - type = le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_FTYPE; - - if (info->flags & IEEE80211_TX_STAT_ACK) { - if (frag == 0) { - local->dot11TransmittedFrameCount++; - if (is_multicast_ether_addr(hdr->addr1)) - local->dot11MulticastTransmittedFrameCount++; - if (info->status.retry_count > 0) - local->dot11RetryCount++; - if (info->status.retry_count > 1) - local->dot11MultipleRetryCount++; - } + return NOTIFY_OK; +} +#endif - /* This counter shall be incremented for an acknowledged MPDU - * with an individual address in the address 1 field or an MPDU - * with a multicast address in the address 1 field of type Data - * or Management. */ - if (!is_multicast_ether_addr(hdr->addr1) || - type == IEEE80211_FTYPE_DATA || - type == IEEE80211_FTYPE_MGMT) - local->dot11TransmittedFragmentCount++; - } else { - if (frag == 0) - local->dot11FailedCount++; - } +#if IS_ENABLED(CONFIG_IPV6) +static int ieee80211_ifa6_changed(struct notifier_block *nb, + unsigned long data, void *arg) +{ + struct inet6_ifaddr *ifa = (struct inet6_ifaddr *)arg; + struct inet6_dev *idev = ifa->idev; + struct net_device *ndev = ifa->idev->dev; + struct ieee80211_local *local = + container_of(nb, struct ieee80211_local, ifa6_notifier); + struct wireless_dev *wdev = ndev->ieee80211_ptr; + struct ieee80211_sub_if_data *sdata; - /* this was a transmitted frame, but now we want to reuse it */ - skb_orphan(skb); + /* Make sure it's our interface that got changed */ + if (!wdev || wdev->wiphy != local->hw.wiphy) + return NOTIFY_DONE; + + sdata = IEEE80211_DEV_TO_SUB_IF(ndev); /* - * This is a bit racy but we can avoid a lot of work - * with this test... + * For now only support station mode. This is mostly because + * doing AP would have to handle AP_VLAN in some way ... */ - if (!local->monitors && !local->cooked_mntrs) { - dev_kfree_skb(skb); - return; - } - - /* send frame to monitor interfaces now */ + if (sdata->vif.type != NL80211_IFTYPE_STATION) + return NOTIFY_DONE; - if (skb_headroom(skb) < sizeof(*rthdr)) { - printk(KERN_ERR "ieee80211_tx_status: headroom too small\n"); - dev_kfree_skb(skb); - return; - } - - rthdr = (struct ieee80211_tx_status_rtap_hdr *) - skb_push(skb, sizeof(*rthdr)); - - memset(rthdr, 0, sizeof(*rthdr)); - rthdr->hdr.it_len = cpu_to_le16(sizeof(*rthdr)); - rthdr->hdr.it_present = - cpu_to_le32((1 << IEEE80211_RADIOTAP_TX_FLAGS) | - (1 << IEEE80211_RADIOTAP_DATA_RETRIES)); - - if (!(info->flags & IEEE80211_TX_STAT_ACK) && - !is_multicast_ether_addr(hdr->addr1)) - rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_FAIL); + drv_ipv6_addr_change(local, sdata, idev); - if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) && - (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)) - rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_CTS); - else if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) - rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_RTS); - - rthdr->data_retries = info->status.retry_count; + return NOTIFY_OK; +} +#endif - /* XXX: is this sufficient for BPF? */ - skb_set_mac_header(skb, 0); - skb->ip_summed = CHECKSUM_UNNECESSARY; - skb->pkt_type = PACKET_OTHERHOST; - skb->protocol = htons(ETH_P_802_2); - memset(skb->cb, 0, sizeof(skb->cb)); +/* There isn't a lot of sense in it, but you can transmit anything you like */ +static const struct ieee80211_txrx_stypes +ieee80211_default_mgmt_stypes[NUM_NL80211_IFTYPES] = { + [NL80211_IFTYPE_ADHOC] = { + .tx = 0xffff, + .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | + BIT(IEEE80211_STYPE_AUTH >> 4) | + BIT(IEEE80211_STYPE_DEAUTH >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4), + }, + [NL80211_IFTYPE_STATION] = { + .tx = 0xffff, + .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4), + }, + [NL80211_IFTYPE_AP] = { + .tx = 0xffff, + .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) | + BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4) | + BIT(IEEE80211_STYPE_DISASSOC >> 4) | + BIT(IEEE80211_STYPE_AUTH >> 4) | + BIT(IEEE80211_STYPE_DEAUTH >> 4) | + BIT(IEEE80211_STYPE_ACTION >> 4), + }, + [NL80211_IFTYPE_AP_VLAN] = { + /* copy AP */ + .tx = 0xffff, + .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) | + BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4) | + BIT(IEEE80211_STYPE_DISASSOC >> 4) | + BIT(IEEE80211_STYPE_AUTH >> 4) | + BIT(IEEE80211_STYPE_DEAUTH >> 4) | + BIT(IEEE80211_STYPE_ACTION >> 4), + }, + [NL80211_IFTYPE_P2P_CLIENT] = { + .tx = 0xffff, + .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4), + }, + [NL80211_IFTYPE_P2P_GO] = { + .tx = 0xffff, + .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) | + BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4) | + BIT(IEEE80211_STYPE_DISASSOC >> 4) | + BIT(IEEE80211_STYPE_AUTH >> 4) | + BIT(IEEE80211_STYPE_DEAUTH >> 4) | + BIT(IEEE80211_STYPE_ACTION >> 4), + }, + [NL80211_IFTYPE_MESH_POINT] = { + .tx = 0xffff, + .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | + BIT(IEEE80211_STYPE_AUTH >> 4) | + BIT(IEEE80211_STYPE_DEAUTH >> 4), + }, + [NL80211_IFTYPE_P2P_DEVICE] = { + .tx = 0xffff, + .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4), + }, +}; - rcu_read_lock(); - list_for_each_entry_rcu(sdata, &local->interfaces, list) { - if (sdata->vif.type == IEEE80211_IF_TYPE_MNTR) { - if (!netif_running(sdata->dev)) - continue; +static const struct ieee80211_ht_cap mac80211_ht_capa_mod_mask = { + .ampdu_params_info = IEEE80211_HT_AMPDU_PARM_FACTOR | + IEEE80211_HT_AMPDU_PARM_DENSITY, + + .cap_info = cpu_to_le16(IEEE80211_HT_CAP_SUP_WIDTH_20_40 | + IEEE80211_HT_CAP_MAX_AMSDU | + IEEE80211_HT_CAP_SGI_20 | + IEEE80211_HT_CAP_SGI_40 | + IEEE80211_HT_CAP_LDPC_CODING | + IEEE80211_HT_CAP_40MHZ_INTOLERANT), + .mcs = { + .rx_mask = { 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, }, + }, +}; - if (prev_dev) { - skb2 = skb_clone(skb, GFP_ATOMIC); - if (skb2) { - skb2->dev = prev_dev; - netif_rx(skb2); - } - } +static const struct ieee80211_vht_cap mac80211_vht_capa_mod_mask = { + .vht_cap_info = + cpu_to_le32(IEEE80211_VHT_CAP_RXLDPC | + IEEE80211_VHT_CAP_SHORT_GI_80 | + IEEE80211_VHT_CAP_SHORT_GI_160 | + IEEE80211_VHT_CAP_RXSTBC_1 | + IEEE80211_VHT_CAP_RXSTBC_2 | + IEEE80211_VHT_CAP_RXSTBC_3 | + IEEE80211_VHT_CAP_RXSTBC_4 | + IEEE80211_VHT_CAP_TXSTBC | + IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE | + IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE | + IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN | + IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN | + IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK), + .supp_mcs = { + .rx_mcs_map = cpu_to_le16(~0), + .tx_mcs_map = cpu_to_le16(~0), + }, +}; - prev_dev = sdata->dev; - } - } - if (prev_dev) { - skb->dev = prev_dev; - netif_rx(skb); - skb = NULL; - } - rcu_read_unlock(); - dev_kfree_skb(skb); -} -EXPORT_SYMBOL(ieee80211_tx_status); +static const u8 extended_capabilities[] = { + 0, 0, 0, 0, 0, 0, 0, + WLAN_EXT_CAPA8_OPMODE_NOTIF, +}; struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, const struct ieee80211_ops *ops) { struct ieee80211_local *local; - int priv_size; + int priv_size, i; struct wiphy *wiphy; + bool use_chanctx; + + if (WARN_ON(!ops->tx || !ops->start || !ops->stop || !ops->config || + !ops->add_interface || !ops->remove_interface || + !ops->configure_filter)) + return NULL; + + if (WARN_ON(ops->sta_state && (ops->sta_add || ops->sta_remove))) + return NULL; + + /* check all or no channel context operations exist */ + i = !!ops->add_chanctx + !!ops->remove_chanctx + + !!ops->change_chanctx + !!ops->assign_vif_chanctx + + !!ops->unassign_vif_chanctx; + if (WARN_ON(i != 0 && i != 5)) + return NULL; + use_chanctx = i == 5; /* Ensure 32-byte alignment of our private data and hw private data. * We use the wiphy priv data for both our ieee80211_local and for @@ -1551,97 +520,447 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, * +-------------------------+ * */ - priv_size = ((sizeof(struct ieee80211_local) + - NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST) + - priv_data_len; + priv_size = ALIGN(sizeof(*local), NETDEV_ALIGN) + priv_data_len; wiphy = wiphy_new(&mac80211_config_ops, priv_size); if (!wiphy) return NULL; + wiphy->mgmt_stypes = ieee80211_default_mgmt_stypes; + wiphy->privid = mac80211_wiphy_privid; + wiphy->flags |= WIPHY_FLAG_NETNS_OK | + WIPHY_FLAG_4ADDR_AP | + WIPHY_FLAG_4ADDR_STATION | + WIPHY_FLAG_REPORTS_OBSS | + WIPHY_FLAG_OFFCHAN_TX; + + wiphy->extended_capabilities = extended_capabilities; + wiphy->extended_capabilities_mask = extended_capabilities; + wiphy->extended_capabilities_len = ARRAY_SIZE(extended_capabilities); + + if (ops->remain_on_channel) + wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; + + wiphy->features |= NL80211_FEATURE_SK_TX_STATUS | + NL80211_FEATURE_SAE | + NL80211_FEATURE_HT_IBSS | + NL80211_FEATURE_VIF_TXPOWER | + NL80211_FEATURE_USERSPACE_MPM; + + if (!ops->hw_scan) + wiphy->features |= NL80211_FEATURE_LOW_PRIORITY_SCAN | + NL80211_FEATURE_AP_SCAN; + + + if (!ops->set_key) + wiphy->flags |= WIPHY_FLAG_IBSS_RSN; + + wiphy->bss_priv_size = sizeof(struct ieee80211_bss); + local = wiphy_priv(wiphy); + local->hw.wiphy = wiphy; - local->hw.priv = (char *)local + - ((sizeof(struct ieee80211_local) + - NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST); - - BUG_ON(!ops->tx); - BUG_ON(!ops->start); - BUG_ON(!ops->stop); - BUG_ON(!ops->config); - BUG_ON(!ops->add_interface); - BUG_ON(!ops->remove_interface); - BUG_ON(!ops->configure_filter); + local->hw.priv = (char *)local + ALIGN(sizeof(*local), NETDEV_ALIGN); + local->ops = ops; + local->use_chanctx = use_chanctx; + + /* set up some defaults */ + local->hw.queues = 1; + local->hw.max_rates = 1; + local->hw.max_report_rates = 0; + local->hw.max_rx_aggregation_subframes = IEEE80211_MAX_AMPDU_BUF; + local->hw.max_tx_aggregation_subframes = IEEE80211_MAX_AMPDU_BUF; + local->hw.offchannel_tx_hw_queue = IEEE80211_INVAL_HW_QUEUE; + local->hw.conf.long_frame_max_tx_count = wiphy->retry_long; + local->hw.conf.short_frame_max_tx_count = wiphy->retry_short; + local->hw.radiotap_mcs_details = IEEE80211_RADIOTAP_MCS_HAVE_MCS | + IEEE80211_RADIOTAP_MCS_HAVE_GI | + IEEE80211_RADIOTAP_MCS_HAVE_BW; + local->hw.radiotap_vht_details = IEEE80211_RADIOTAP_VHT_KNOWN_GI | + IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH; + local->hw.uapsd_queues = IEEE80211_DEFAULT_UAPSD_QUEUES; + local->hw.uapsd_max_sp_len = IEEE80211_DEFAULT_MAX_SP_LEN; + local->user_power_level = IEEE80211_UNSET_POWER_LEVEL; + wiphy->ht_capa_mod_mask = &mac80211_ht_capa_mod_mask; + wiphy->vht_capa_mod_mask = &mac80211_vht_capa_mod_mask; - local->hw.queues = 1; /* default */ + INIT_LIST_HEAD(&local->interfaces); - local->bridge_packets = 1; + __hw_addr_init(&local->mc_list); - local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD; - local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD; - local->short_retry_limit = 7; - local->long_retry_limit = 4; - local->hw.conf.radio_enabled = 1; + mutex_init(&local->iflist_mtx); + mutex_init(&local->mtx); - INIT_LIST_HEAD(&local->interfaces); + mutex_init(&local->key_mtx); + spin_lock_init(&local->filter_lock); + spin_lock_init(&local->rx_path_lock); + spin_lock_init(&local->queue_stop_reason_lock); + + INIT_LIST_HEAD(&local->chanctx_list); + mutex_init(&local->chanctx_mtx); + + INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work); - spin_lock_init(&local->key_lock); + INIT_WORK(&local->restart_work, ieee80211_restart_work); - INIT_DELAYED_WORK(&local->scan_work, ieee80211_sta_scan_work); + INIT_WORK(&local->radar_detected_work, + ieee80211_dfs_radar_detected_work); + + INIT_WORK(&local->reconfig_filter, ieee80211_reconfig_filter); + local->smps_mode = IEEE80211_SMPS_OFF; + + INIT_WORK(&local->dynamic_ps_enable_work, + ieee80211_dynamic_ps_enable_work); + INIT_WORK(&local->dynamic_ps_disable_work, + ieee80211_dynamic_ps_disable_work); + setup_timer(&local->dynamic_ps_timer, + ieee80211_dynamic_ps_timer, (unsigned long) local); + + INIT_WORK(&local->sched_scan_stopped_work, + ieee80211_sched_scan_stopped_work); + + spin_lock_init(&local->ack_status_lock); + idr_init(&local->ack_status_frames); sta_info_init(local); + for (i = 0; i < IEEE80211_MAX_QUEUES; i++) { + skb_queue_head_init(&local->pending[i]); + atomic_set(&local->agg_queue_stop[i], 0); + } tasklet_init(&local->tx_pending_tasklet, ieee80211_tx_pending, (unsigned long)local); - tasklet_disable(&local->tx_pending_tasklet); tasklet_init(&local->tasklet, ieee80211_tasklet_handler, (unsigned long) local); - tasklet_disable(&local->tasklet); skb_queue_head_init(&local->skb_queue); skb_queue_head_init(&local->skb_queue_unreliable); - return local_to_hw(local); + ieee80211_led_names(local); + + ieee80211_roc_setup(local); + + return &local->hw; } EXPORT_SYMBOL(ieee80211_alloc_hw); +static int ieee80211_init_cipher_suites(struct ieee80211_local *local) +{ + bool have_wep = !(IS_ERR(local->wep_tx_tfm) || + IS_ERR(local->wep_rx_tfm)); + bool have_mfp = local->hw.flags & IEEE80211_HW_MFP_CAPABLE; + const struct ieee80211_cipher_scheme *cs = local->hw.cipher_schemes; + int n_suites = 0, r = 0, w = 0; + u32 *suites; + static const u32 cipher_suites[] = { + /* keep WEP first, it may be removed below */ + WLAN_CIPHER_SUITE_WEP40, + WLAN_CIPHER_SUITE_WEP104, + WLAN_CIPHER_SUITE_TKIP, + WLAN_CIPHER_SUITE_CCMP, + + /* keep last -- depends on hw flags! */ + WLAN_CIPHER_SUITE_AES_CMAC + }; + + /* Driver specifies the ciphers, we have nothing to do... */ + if (local->hw.wiphy->cipher_suites && have_wep) + return 0; + + /* Set up cipher suites if driver relies on mac80211 cipher defs */ + if (!local->hw.wiphy->cipher_suites && !cs) { + local->hw.wiphy->cipher_suites = cipher_suites; + local->hw.wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites); + + if (!have_mfp) + local->hw.wiphy->n_cipher_suites--; + + if (!have_wep) { + local->hw.wiphy->cipher_suites += 2; + local->hw.wiphy->n_cipher_suites -= 2; + } + + return 0; + } + + if (!local->hw.wiphy->cipher_suites) { + /* + * Driver specifies cipher schemes only + * We start counting ciphers defined by schemes, TKIP and CCMP + */ + n_suites = local->hw.n_cipher_schemes + 2; + + /* check if we have WEP40 and WEP104 */ + if (have_wep) + n_suites += 2; + + /* check if we have AES_CMAC */ + if (have_mfp) + n_suites++; + + suites = kmalloc(sizeof(u32) * n_suites, GFP_KERNEL); + if (!suites) + return -ENOMEM; + + suites[w++] = WLAN_CIPHER_SUITE_CCMP; + suites[w++] = WLAN_CIPHER_SUITE_TKIP; + + if (have_wep) { + suites[w++] = WLAN_CIPHER_SUITE_WEP40; + suites[w++] = WLAN_CIPHER_SUITE_WEP104; + } + + if (have_mfp) + suites[w++] = WLAN_CIPHER_SUITE_AES_CMAC; + + for (r = 0; r < local->hw.n_cipher_schemes; r++) + suites[w++] = cs[r].cipher; + } else { + /* Driver provides cipher suites, but we need to exclude WEP */ + suites = kmemdup(local->hw.wiphy->cipher_suites, + sizeof(u32) * local->hw.wiphy->n_cipher_suites, + GFP_KERNEL); + if (!suites) + return -ENOMEM; + + for (r = 0; r < local->hw.wiphy->n_cipher_suites; r++) { + u32 suite = local->hw.wiphy->cipher_suites[r]; + + if (suite == WLAN_CIPHER_SUITE_WEP40 || + suite == WLAN_CIPHER_SUITE_WEP104) + continue; + suites[w++] = suite; + } + } + + local->hw.wiphy->cipher_suites = suites; + local->hw.wiphy->n_cipher_suites = w; + local->wiphy_ciphers_allocated = true; + + return 0; +} + int ieee80211_register_hw(struct ieee80211_hw *hw) { struct ieee80211_local *local = hw_to_local(hw); - const char *name; - int result; + int result, i; enum ieee80211_band band; - struct net_device *mdev; - struct wireless_dev *mwdev; + int channels, max_bitrates; + bool supp_ht, supp_vht; + netdev_features_t feature_whitelist; + struct cfg80211_chan_def dflt_chandef = {}; + + if (hw->flags & IEEE80211_HW_QUEUE_CONTROL && + (local->hw.offchannel_tx_hw_queue == IEEE80211_INVAL_HW_QUEUE || + local->hw.offchannel_tx_hw_queue >= local->hw.queues)) + return -EINVAL; + +#ifdef CONFIG_PM + if (hw->wiphy->wowlan && (!local->ops->suspend || !local->ops->resume)) + return -EINVAL; +#endif + + if (!local->use_chanctx) { + for (i = 0; i < local->hw.wiphy->n_iface_combinations; i++) { + const struct ieee80211_iface_combination *comb; + + comb = &local->hw.wiphy->iface_combinations[i]; + + if (comb->num_different_channels > 1) + return -EINVAL; + } + } else { + /* + * WDS is currently prohibited when channel contexts are used + * because there's no clear definition of which channel WDS + * type interfaces use + */ + if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_WDS)) + return -EINVAL; + + /* DFS currently not supported with channel context drivers */ + for (i = 0; i < local->hw.wiphy->n_iface_combinations; i++) { + const struct ieee80211_iface_combination *comb; + + comb = &local->hw.wiphy->iface_combinations[i]; + + if (comb->radar_detect_widths) + return -EINVAL; + } + } + + /* Only HW csum features are currently compatible with mac80211 */ + feature_whitelist = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | + NETIF_F_HW_CSUM; + if (WARN_ON(hw->netdev_features & ~feature_whitelist)) + return -EINVAL; + + if (hw->max_report_rates == 0) + hw->max_report_rates = hw->max_rates; + + local->rx_chains = 1; /* * generic code guarantees at least one band, * set this very early because much code assumes * that hw.conf.channel is assigned */ + channels = 0; + max_bitrates = 0; + supp_ht = false; + supp_vht = false; for (band = 0; band < IEEE80211_NUM_BANDS; band++) { struct ieee80211_supported_band *sband; sband = local->hw.wiphy->bands[band]; - if (sband) { + if (!sband) + continue; + + if (!dflt_chandef.chan) { + cfg80211_chandef_create(&dflt_chandef, + &sband->channels[0], + NL80211_CHAN_NO_HT); /* init channel we're on */ - local->hw.conf.channel = - local->oper_channel = - local->scan_channel = &sband->channels[0]; - break; + if (!local->use_chanctx && !local->_oper_chandef.chan) { + local->hw.conf.chandef = dflt_chandef; + local->_oper_chandef = dflt_chandef; + } + local->monitor_chandef = dflt_chandef; } + + channels += sband->n_channels; + + if (max_bitrates < sband->n_bitrates) + max_bitrates = sband->n_bitrates; + supp_ht = supp_ht || sband->ht_cap.ht_supported; + supp_vht = supp_vht || sband->vht_cap.vht_supported; + + if (sband->ht_cap.ht_supported) + local->rx_chains = + max(ieee80211_mcs_to_chains(&sband->ht_cap.mcs), + local->rx_chains); + + /* TODO: consider VHT for RX chains, hopefully it's the same */ + } + + /* if low-level driver supports AP, we also support VLAN */ + if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_AP)) { + hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP_VLAN); + hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_AP_VLAN); + } + + /* mac80211 always supports monitor */ + hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR); + hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_MONITOR); + + /* mac80211 doesn't support more than one IBSS interface right now */ + for (i = 0; i < hw->wiphy->n_iface_combinations; i++) { + const struct ieee80211_iface_combination *c; + int j; + + c = &hw->wiphy->iface_combinations[i]; + + for (j = 0; j < c->n_limits; j++) + if ((c->limits[j].types & BIT(NL80211_IFTYPE_ADHOC)) && + c->limits[j].max > 1) + return -EINVAL; + } + + local->int_scan_req = kzalloc(sizeof(*local->int_scan_req) + + sizeof(void *) * channels, GFP_KERNEL); + if (!local->int_scan_req) + return -ENOMEM; + + for (band = 0; band < IEEE80211_NUM_BANDS; band++) { + if (!local->hw.wiphy->bands[band]) + continue; + local->int_scan_req->rates[band] = (u32) -1; } +#ifndef CONFIG_MAC80211_MESH + /* mesh depends on Kconfig, but drivers should set it if they want */ + local->hw.wiphy->interface_modes &= ~BIT(NL80211_IFTYPE_MESH_POINT); +#endif + + /* if the underlying driver supports mesh, mac80211 will (at least) + * provide routing of mesh authentication frames to userspace */ + if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_MESH_POINT)) + local->hw.wiphy->flags |= WIPHY_FLAG_MESH_AUTH; + + /* mac80211 supports control port protocol changing */ + local->hw.wiphy->flags |= WIPHY_FLAG_CONTROL_PORT_PROTOCOL; + + if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM) { + local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; + } else if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC) { + local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC; + if (hw->max_signal <= 0) { + result = -EINVAL; + goto fail_wiphy_register; + } + } + + WARN((local->hw.flags & IEEE80211_HW_SUPPORTS_UAPSD) + && (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK), + "U-APSD not supported with HW_PS_NULLFUNC_STACK\n"); + + /* + * Calculate scan IE length -- we need this to alloc + * memory and to subtract from the driver limit. It + * includes the DS Params, (extended) supported rates, and HT + * information -- SSID is the driver's responsibility. + */ + local->scan_ies_len = 4 + max_bitrates /* (ext) supp rates */ + + 3 /* DS Params */; + if (supp_ht) + local->scan_ies_len += 2 + sizeof(struct ieee80211_ht_cap); + + if (supp_vht) + local->scan_ies_len += + 2 + sizeof(struct ieee80211_vht_cap); + + if (!local->ops->hw_scan) { + /* For hw_scan, driver needs to set these up. */ + local->hw.wiphy->max_scan_ssids = 4; + local->hw.wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN; + } + + /* + * If the driver supports any scan IEs, then assume the + * limit includes the IEs mac80211 will add, otherwise + * leave it at zero and let the driver sort it out; we + * still pass our IEs to the driver but userspace will + * not be allowed to in that case. + */ + if (local->hw.wiphy->max_scan_ie_len) + local->hw.wiphy->max_scan_ie_len -= local->scan_ies_len; + + WARN_ON(!ieee80211_cs_list_valid(local->hw.cipher_schemes, + local->hw.n_cipher_schemes)); + + result = ieee80211_init_cipher_suites(local); + if (result < 0) + goto fail_wiphy_register; + + if (!local->ops->remain_on_channel) + local->hw.wiphy->max_remain_on_channel_duration = 5000; + + /* mac80211 based drivers don't support internal TDLS setup */ + if (local->hw.wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS) + local->hw.wiphy->flags |= WIPHY_FLAG_TDLS_EXTERNAL_SETUP; + + local->hw.wiphy->max_num_csa_counters = IEEE80211_MAX_CSA_COUNTERS_NUM; + result = wiphy_register(local->hw.wiphy); if (result < 0) - return result; + goto fail_wiphy_register; /* * We use the number of queues for feature tests (QoS, HT) internally @@ -1649,35 +968,10 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) */ if (hw->queues > IEEE80211_MAX_QUEUES) hw->queues = IEEE80211_MAX_QUEUES; - if (hw->ampdu_queues > IEEE80211_MAX_AMPDU_QUEUES) - hw->ampdu_queues = IEEE80211_MAX_AMPDU_QUEUES; - if (hw->queues < 4) - hw->ampdu_queues = 0; - - mdev = alloc_netdev_mq(sizeof(struct wireless_dev), - "wmaster%d", ether_setup, - ieee80211_num_queues(hw)); - if (!mdev) - goto fail_mdev_alloc; - - mwdev = netdev_priv(mdev); - mdev->ieee80211_ptr = mwdev; - mwdev->wiphy = local->hw.wiphy; - - local->mdev = mdev; - - ieee80211_rx_bss_list_init(local); - - mdev->hard_start_xmit = ieee80211_master_start_xmit; - mdev->open = ieee80211_master_open; - mdev->stop = ieee80211_master_stop; - mdev->type = ARPHRD_IEEE80211; - mdev->header_ops = &ieee80211_header_ops; - mdev->set_multicast_list = ieee80211_master_set_multicast_list; - - name = wiphy_dev(local->hw.wiphy)->driver->name; - local->hw.workqueue = create_freezeable_workqueue(name); - if (!local->hw.workqueue) { + + local->workqueue = + alloc_ordered_workqueue("%s", 0, wiphy_name(local->hw.wiphy)); + if (!local->workqueue) { result = -ENOMEM; goto fail_workqueue; } @@ -1688,94 +982,118 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) * interfaces, but never both at the same time. */ local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom, - sizeof(struct ieee80211_tx_status_rtap_hdr)); + IEEE80211_TX_STATUS_HEADROOM); debugfs_hw_add(local); - if (local->hw.conf.beacon_int < 10) - local->hw.conf.beacon_int = 100; - + /* + * if the driver doesn't specify a max listen interval we + * use 5 which should be a safe default + */ if (local->hw.max_listen_interval == 0) - local->hw.max_listen_interval = 1; + local->hw.max_listen_interval = 5; local->hw.conf.listen_interval = local->hw.max_listen_interval; - local->wstats_flags |= local->hw.flags & (IEEE80211_HW_SIGNAL_UNSPEC | - IEEE80211_HW_SIGNAL_DB | - IEEE80211_HW_SIGNAL_DBM) ? - IW_QUAL_QUAL_UPDATED : IW_QUAL_QUAL_INVALID; - local->wstats_flags |= local->hw.flags & IEEE80211_HW_NOISE_DBM ? - IW_QUAL_NOISE_UPDATED : IW_QUAL_NOISE_INVALID; - if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM) - local->wstats_flags |= IW_QUAL_DBM; + local->dynamic_ps_forced_timeout = -1; - result = sta_info_start(local); + result = ieee80211_wep_init(local); if (result < 0) - goto fail_sta_info; + wiphy_debug(local->hw.wiphy, "Failed to initialize wep: %d\n", + result); - rtnl_lock(); - result = dev_alloc_name(local->mdev, local->mdev->name); - if (result < 0) - goto fail_dev; + local->hw.conf.flags = IEEE80211_CONF_IDLE; - memcpy(local->mdev->dev_addr, local->hw.wiphy->perm_addr, ETH_ALEN); - SET_NETDEV_DEV(local->mdev, wiphy_dev(local->hw.wiphy)); + ieee80211_led_init(local); - result = register_netdevice(local->mdev); - if (result < 0) - goto fail_dev; + rtnl_lock(); result = ieee80211_init_rate_ctrl_alg(local, hw->rate_control_algorithm); if (result < 0) { - printk(KERN_DEBUG "%s: Failed to initialize rate control " - "algorithm\n", wiphy_name(local->hw.wiphy)); + wiphy_debug(local->hw.wiphy, + "Failed to initialize rate control algorithm\n"); goto fail_rate; } - result = ieee80211_wep_init(local); - - if (result < 0) { - printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n", - wiphy_name(local->hw.wiphy), result); - goto fail_wep; + /* add one default STA interface if supported */ + if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_STATION)) { + result = ieee80211_if_add(local, "wlan%d", NULL, + NL80211_IFTYPE_STATION, NULL); + if (result) + wiphy_warn(local->hw.wiphy, + "Failed to add default virtual iface\n"); } - local->mdev->select_queue = ieee80211_select_queue; + rtnl_unlock(); - /* add one default STA interface */ - result = ieee80211_if_add(local, "wlan%d", NULL, - IEEE80211_IF_TYPE_STA, NULL); - if (result) - printk(KERN_WARNING "%s: Failed to add default virtual iface\n", - wiphy_name(local->hw.wiphy)); + local->network_latency_notifier.notifier_call = + ieee80211_max_network_latency; + result = pm_qos_add_notifier(PM_QOS_NETWORK_LATENCY, + &local->network_latency_notifier); + if (result) { + rtnl_lock(); + goto fail_pm_qos; + } - rtnl_unlock(); +#ifdef CONFIG_INET + local->ifa_notifier.notifier_call = ieee80211_ifa_changed; + result = register_inetaddr_notifier(&local->ifa_notifier); + if (result) + goto fail_ifa; +#endif - ieee80211_led_init(local); +#if IS_ENABLED(CONFIG_IPV6) + local->ifa6_notifier.notifier_call = ieee80211_ifa6_changed; + result = register_inet6addr_notifier(&local->ifa6_notifier); + if (result) + goto fail_ifa6; +#endif return 0; -fail_wep: - rate_control_deinitialize(local); -fail_rate: - unregister_netdevice(local->mdev); - local->mdev = NULL; -fail_dev: +#if IS_ENABLED(CONFIG_IPV6) + fail_ifa6: +#ifdef CONFIG_INET + unregister_inetaddr_notifier(&local->ifa_notifier); +#endif +#endif +#if defined(CONFIG_INET) || defined(CONFIG_IPV6) + fail_ifa: + pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY, + &local->network_latency_notifier); + rtnl_lock(); +#endif + fail_pm_qos: + ieee80211_led_exit(local); + ieee80211_remove_interfaces(local); + fail_rate: rtnl_unlock(); + ieee80211_wep_free(local); sta_info_stop(local); -fail_sta_info: - debugfs_hw_del(local); - destroy_workqueue(local->hw.workqueue); -fail_workqueue: - if (local->mdev) - free_netdev(local->mdev); -fail_mdev_alloc: + destroy_workqueue(local->workqueue); + fail_workqueue: wiphy_unregister(local->hw.wiphy); + fail_wiphy_register: + if (local->wiphy_ciphers_allocated) + kfree(local->hw.wiphy->cipher_suites); + kfree(local->int_scan_req); return result; } EXPORT_SYMBOL(ieee80211_register_hw); +void ieee80211_napi_add(struct ieee80211_hw *hw, struct napi_struct *napi, + struct net_device *napi_dev, + int (*poll)(struct napi_struct *, int), + int weight) +{ + struct ieee80211_local *local = hw_to_local(hw); + + netif_napi_add(napi_dev, napi, poll, weight); + local->napi = napi; +} +EXPORT_SYMBOL_GPL(ieee80211_napi_add); + void ieee80211_unregister_hw(struct ieee80211_hw *hw) { struct ieee80211_local *local = hw_to_local(hw); @@ -1783,6 +1101,15 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw) tasklet_kill(&local->tx_pending_tasklet); tasklet_kill(&local->tasklet); + pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY, + &local->network_latency_notifier); +#ifdef CONFIG_INET + unregister_inetaddr_notifier(&local->ifa_notifier); +#endif +#if IS_ENABLED(CONFIG_IPV6) + unregister_inet6addr_notifier(&local->ifa6_notifier); +#endif + rtnl_lock(); /* @@ -1790,40 +1117,55 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw) * because the driver cannot be handing us frames any * more and the tasklet is killed. */ - - /* First, we remove all virtual interfaces. */ ieee80211_remove_interfaces(local); - /* then, finally, remove the master interface */ - unregister_netdevice(local->mdev); - rtnl_unlock(); - ieee80211_rx_bss_list_deinit(local); + cancel_work_sync(&local->restart_work); + cancel_work_sync(&local->reconfig_filter); + flush_work(&local->sched_scan_stopped_work); + ieee80211_clear_tx_pending(local); - sta_info_stop(local); rate_control_deinitialize(local); - debugfs_hw_del(local); - if (skb_queue_len(&local->skb_queue) - || skb_queue_len(&local->skb_queue_unreliable)) - printk(KERN_WARNING "%s: skb_queue not empty\n", - wiphy_name(local->hw.wiphy)); + if (skb_queue_len(&local->skb_queue) || + skb_queue_len(&local->skb_queue_unreliable)) + wiphy_warn(local->hw.wiphy, "skb_queue not empty\n"); skb_queue_purge(&local->skb_queue); skb_queue_purge(&local->skb_queue_unreliable); - destroy_workqueue(local->hw.workqueue); + destroy_workqueue(local->workqueue); wiphy_unregister(local->hw.wiphy); + sta_info_stop(local); ieee80211_wep_free(local); ieee80211_led_exit(local); - free_netdev(local->mdev); + kfree(local->int_scan_req); } EXPORT_SYMBOL(ieee80211_unregister_hw); +static int ieee80211_free_ack_frame(int id, void *p, void *data) +{ + WARN_ONCE(1, "Have pending ack frames!\n"); + kfree_skb(p); + return 0; +} + void ieee80211_free_hw(struct ieee80211_hw *hw) { struct ieee80211_local *local = hw_to_local(hw); + mutex_destroy(&local->iflist_mtx); + mutex_destroy(&local->mtx); + + if (local->wiphy_ciphers_allocated) + kfree(local->hw.wiphy->cipher_suites); + + idr_for_each(&local->ack_status_frames, + ieee80211_free_ack_frame, NULL); + idr_destroy(&local->ack_status_frames); + + kfree(rcu_access_pointer(local->tx_latency)); + wiphy_free(local->hw.wiphy); } EXPORT_SYMBOL(ieee80211_free_hw); @@ -1835,31 +1177,46 @@ static int __init ieee80211_init(void) BUILD_BUG_ON(sizeof(struct ieee80211_tx_info) > sizeof(skb->cb)); BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, driver_data) + - IEEE80211_TX_INFO_DRIVER_DATA_SIZE > sizeof(skb->cb)); + IEEE80211_TX_INFO_DRIVER_DATA_SIZE > sizeof(skb->cb)); - ret = rc80211_pid_init(); + ret = rc80211_minstrel_init(); if (ret) return ret; - ieee80211_debugfs_netdev_init(); + ret = rc80211_minstrel_ht_init(); + if (ret) + goto err_minstrel; + + ret = rc80211_pid_init(); + if (ret) + goto err_pid; + + ret = ieee80211_iface_init(); + if (ret) + goto err_netdev; return 0; + err_netdev: + rc80211_pid_exit(); + err_pid: + rc80211_minstrel_ht_exit(); + err_minstrel: + rc80211_minstrel_exit(); + + return ret; } static void __exit ieee80211_exit(void) { rc80211_pid_exit(); + rc80211_minstrel_ht_exit(); + rc80211_minstrel_exit(); - /* - * For key todo, it'll be empty by now but the work - * might still be scheduled. - */ - flush_scheduled_work(); + ieee80211s_stop(); - if (mesh_allocated) - ieee80211s_stop(); + ieee80211_iface_exit(); - ieee80211_debugfs_netdev_exit(); + rcu_barrier(); } |