diff options
Diffstat (limited to 'net/ipv4/netfilter/Kconfig')
| -rw-r--r-- | net/ipv4/netfilter/Kconfig | 293 |
1 files changed, 128 insertions, 165 deletions
diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig index 90eb7cb47e7..a26ce035e3f 100644 --- a/net/ipv4/netfilter/Kconfig +++ b/net/ipv4/netfilter/Kconfig @@ -5,10 +5,15 @@ menu "IP: Netfilter Configuration" depends on INET && NETFILTER +config NF_DEFRAG_IPV4 + tristate + default n + config NF_CONNTRACK_IPV4 tristate "IPv4 connection tracking support (required for NAT)" depends on NF_CONNTRACK default m if NETFILTER_ADVANCED=n + select NF_DEFRAG_IPV4 ---help--- Connection tracking keeps a record of what packets have passed through your machine, in order to figure out how they are related @@ -22,27 +27,50 @@ config NF_CONNTRACK_IPV4 config NF_CONNTRACK_PROC_COMPAT bool "proc/sysctl compatibility with old connection tracking" - depends on NF_CONNTRACK_IPV4 + depends on NF_CONNTRACK_PROCFS && NF_CONNTRACK_IPV4 default y help This option enables /proc and sysctl compatibility with the old - layer 3 dependant connection tracking. This is needed to keep + layer 3 dependent connection tracking. This is needed to keep old programs that have not been adapted to the new names working. If unsure, say Y. -config IP_NF_QUEUE - tristate "IP Userspace queueing via NETLINK (OBSOLETE)" - depends on NETFILTER_ADVANCED +config NF_TABLES_IPV4 + depends on NF_TABLES + tristate "IPv4 nf_tables support" help - Netfilter has the ability to queue packets to user space: the - netlink device can be used to access them using this driver. + This option enables the IPv4 support for nf_tables. - This option enables the old IPv4-only "ip_queue" implementation - which has been obsoleted by the new "nfnetlink_queue" code (see - CONFIG_NETFILTER_NETLINK_QUEUE). +config NFT_CHAIN_ROUTE_IPV4 + depends on NF_TABLES_IPV4 + tristate "IPv4 nf_tables route chain support" + help + This option enables the "route" chain for IPv4 in nf_tables. This + chain type is used to force packet re-routing after mangling header + fields such as the source, destination, type of service and + the packet mark. + +config NFT_CHAIN_NAT_IPV4 + depends on NF_TABLES_IPV4 + depends on NF_NAT_IPV4 && NFT_NAT + tristate "IPv4 nf_tables nat chain support" + help + This option enables the "nat" chain for IPv4 in nf_tables. This + chain type is used to perform Network Address Translation (NAT) + packet transformations such as the source, destination address and + source and destination ports. + +config NFT_REJECT_IPV4 + depends on NF_TABLES_IPV4 + default NFT_REJECT + tristate - To compile it as a module, choose M here. If unsure, say N. +config NF_TABLES_ARP + depends on NF_TABLES + tristate "ARP nf_tables support" + help + This option enables the ARP support for nf_tables. config IP_NF_IPTABLES tristate "IP tables support (required for filtering/masq/NAT)" @@ -56,65 +84,49 @@ config IP_NF_IPTABLES To compile it as a module, choose M here. If unsure, say N. +if IP_NF_IPTABLES + # The matches. -config IP_NF_MATCH_RECENT - tristate '"recent" match support' - depends on IP_NF_IPTABLES +config IP_NF_MATCH_AH + tristate '"ah" match support' depends on NETFILTER_ADVANCED help - This match is used for creating one or many lists of recently - used addresses and then matching against that/those list(s). - - Short options are available by using 'iptables -m recent -h' - Official Website: <http://snowman.net/projects/ipt_recent/> + This match extension allows you to match a range of SPIs + inside AH header of IPSec packets. To compile it as a module, choose M here. If unsure, say N. config IP_NF_MATCH_ECN tristate '"ecn" match support' - depends on IP_NF_IPTABLES depends on NETFILTER_ADVANCED - help - This option adds a `ECN' match, which allows you to match against - the IPv4 and TCP header ECN fields. - - To compile it as a module, choose M here. If unsure, say N. + select NETFILTER_XT_MATCH_ECN + ---help--- + This is a backwards-compat option for the user's convenience + (e.g. when running oldconfig). It selects + CONFIG_NETFILTER_XT_MATCH_ECN. -config IP_NF_MATCH_AH - tristate '"ah" match support' - depends on IP_NF_IPTABLES - depends on NETFILTER_ADVANCED - help - This match extension allows you to match a range of SPIs - inside AH header of IPSec packets. +config IP_NF_MATCH_RPFILTER + tristate '"rpfilter" reverse path filter match support' + depends on NETFILTER_ADVANCED && (IP_NF_MANGLE || IP_NF_RAW) + ---help--- + This option allows you to match packets whose replies would + go out via the interface the packet came in. To compile it as a module, choose M here. If unsure, say N. + The module will be called ipt_rpfilter. config IP_NF_MATCH_TTL tristate '"ttl" match support' - depends on IP_NF_IPTABLES depends on NETFILTER_ADVANCED - help - This adds CONFIG_IP_NF_MATCH_TTL option, which enabled the user - to match packets by their TTL value. - - To compile it as a module, choose M here. If unsure, say N. - -config IP_NF_MATCH_ADDRTYPE - tristate '"addrtype" address type match support' - depends on IP_NF_IPTABLES - depends on NETFILTER_ADVANCED - help - This option allows you to match what routing thinks of an address, - eg. UNICAST, LOCAL, BROADCAST, ... - - If you want to compile it as a module, say M here and read - <file:Documentation/kbuild/modules.txt>. If unsure, say `N'. + select NETFILTER_XT_MATCH_HL + ---help--- + This is a backwards-compat option for the user's convenience + (e.g. when running oldconfig). It selects + CONFIG_NETFILTER_XT_MATCH_HL. # `filter', generic and specific targets config IP_NF_FILTER tristate "Packet filtering" - depends on IP_NF_IPTABLES default m if NETFILTER_ADVANCED=n help Packet filtering defines a table `filter', which has a series of @@ -134,19 +146,21 @@ config IP_NF_TARGET_REJECT To compile it as a module, choose M here. If unsure, say N. -config IP_NF_TARGET_LOG - tristate "LOG target support" - depends on IP_NF_IPTABLES - default m if NETFILTER_ADVANCED=n +config IP_NF_TARGET_SYNPROXY + tristate "SYNPROXY target support" + depends on NF_CONNTRACK && NETFILTER_ADVANCED + select NETFILTER_SYNPROXY + select SYN_COOKIES help - This option adds a `LOG' target, which allows you to create rules in - any iptables table which records the packet header to the syslog. + The SYNPROXY target allows you to intercept TCP connections and + establish them using syncookies before they are passed on to the + server. This allows to avoid conntrack and server resource usage + during SYN-flood attacks. - To compile it as a module, choose M here. If unsure, say N. + To compile it as a module, choose M here. If unsure, say N. config IP_NF_TARGET_ULOG - tristate "ULOG target support" - depends on IP_NF_IPTABLES + tristate "ULOG target support (obsolete)" default m if NETFILTER_ADVANCED=n ---help--- @@ -160,30 +174,27 @@ config IP_NF_TARGET_ULOG which can only be viewed through syslog. The appropriate userspace logging daemon (ulogd) may be obtained from - <http://www.gnumonks.org/projects/ulogd/> + <http://www.netfilter.org/projects/ulogd/index.html> To compile it as a module, choose M here. If unsure, say N. # NAT + specific targets: nf_conntrack -config NF_NAT - tristate "Full NAT" - depends on IP_NF_IPTABLES && NF_CONNTRACK_IPV4 +config NF_NAT_IPV4 + tristate "IPv4 NAT" + depends on NF_CONNTRACK_IPV4 default m if NETFILTER_ADVANCED=n + select NF_NAT help - The Full NAT option allows masquerading, port forwarding and other + The IPv4 NAT option allows masquerading, port forwarding and other forms of full Network Address Port Translation. It is controlled by the `nat' table in iptables: see the man page for iptables(8). To compile it as a module, choose M here. If unsure, say N. -config NF_NAT_NEEDED - bool - depends on NF_NAT - default y +if NF_NAT_IPV4 config IP_NF_TARGET_MASQUERADE tristate "MASQUERADE target support" - depends on NF_NAT default m if NETFILTER_ADVANCED=n help Masquerading is a special case of NAT: all outgoing connections are @@ -194,33 +205,31 @@ config IP_NF_TARGET_MASQUERADE To compile it as a module, choose M here. If unsure, say N. -config IP_NF_TARGET_REDIRECT - tristate "REDIRECT target support" - depends on NF_NAT - depends on NETFILTER_ADVANCED - help - REDIRECT is a special case of NAT: all incoming connections are - mapped onto the incoming interface's address, causing the packets to - come to the local machine instead of passing through. This is - useful for transparent proxies. - - To compile it as a module, choose M here. If unsure, say N. - config IP_NF_TARGET_NETMAP tristate "NETMAP target support" - depends on NF_NAT depends on NETFILTER_ADVANCED - help - NETMAP is an implementation of static 1:1 NAT mapping of network - addresses. It maps the network address part, while keeping the host - address part intact. + select NETFILTER_XT_TARGET_NETMAP + ---help--- + This is a backwards-compat option for the user's convenience + (e.g. when running oldconfig). It selects + CONFIG_NETFILTER_XT_TARGET_NETMAP. - To compile it as a module, choose M here. If unsure, say N. +config IP_NF_TARGET_REDIRECT + tristate "REDIRECT target support" + depends on NETFILTER_ADVANCED + select NETFILTER_XT_TARGET_REDIRECT + ---help--- + This is a backwards-compat option for the user's convenience + (e.g. when running oldconfig). It selects + CONFIG_NETFILTER_XT_TARGET_REDIRECT. + +endif config NF_NAT_SNMP_BASIC tristate "Basic SNMP-ALG support" - depends on NF_NAT + depends on NF_CONNTRACK_SNMP && NF_NAT_IPV4 depends on NETFILTER_ADVANCED + default NF_NAT && NF_CONNTRACK_SNMP ---help--- This module implements an Application Layer Gateway (ALG) for @@ -240,66 +249,25 @@ config NF_NAT_SNMP_BASIC # <expr> '&&' <expr> (6) # # (6) Returns the result of min(/expr/, /expr/). -config NF_NAT_PROTO_DCCP - tristate - depends on NF_NAT && NF_CT_PROTO_DCCP - default NF_NAT && NF_CT_PROTO_DCCP config NF_NAT_PROTO_GRE tristate - depends on NF_NAT && NF_CT_PROTO_GRE - -config NF_NAT_PROTO_UDPLITE - tristate - depends on NF_NAT && NF_CT_PROTO_UDPLITE - default NF_NAT && NF_CT_PROTO_UDPLITE - -config NF_NAT_PROTO_SCTP - tristate - default NF_NAT && NF_CT_PROTO_SCTP - depends on NF_NAT && NF_CT_PROTO_SCTP - select LIBCRC32C - -config NF_NAT_FTP - tristate - depends on IP_NF_IPTABLES && NF_CONNTRACK && NF_NAT - default NF_NAT && NF_CONNTRACK_FTP - -config NF_NAT_IRC - tristate - depends on IP_NF_IPTABLES && NF_CONNTRACK && NF_NAT - default NF_NAT && NF_CONNTRACK_IRC - -config NF_NAT_TFTP - tristate - depends on IP_NF_IPTABLES && NF_CONNTRACK && NF_NAT - default NF_NAT && NF_CONNTRACK_TFTP - -config NF_NAT_AMANDA - tristate - depends on IP_NF_IPTABLES && NF_CONNTRACK && NF_NAT - default NF_NAT && NF_CONNTRACK_AMANDA + depends on NF_NAT_IPV4 && NF_CT_PROTO_GRE config NF_NAT_PPTP tristate - depends on IP_NF_IPTABLES && NF_CONNTRACK && NF_NAT - default NF_NAT && NF_CONNTRACK_PPTP + depends on NF_CONNTRACK && NF_NAT_IPV4 + default NF_NAT_IPV4 && NF_CONNTRACK_PPTP select NF_NAT_PROTO_GRE config NF_NAT_H323 tristate - depends on IP_NF_IPTABLES && NF_CONNTRACK && NF_NAT - default NF_NAT && NF_CONNTRACK_H323 - -config NF_NAT_SIP - tristate - depends on IP_NF_IPTABLES && NF_CONNTRACK && NF_NAT - default NF_NAT && NF_CONNTRACK_SIP + depends on NF_CONNTRACK && NF_NAT_IPV4 + default NF_NAT_IPV4 && NF_CONNTRACK_H323 # mangle + specific targets config IP_NF_MANGLE tristate "Packet mangling" - depends on IP_NF_IPTABLES default m if NETFILTER_ADVANCED=n help This option adds a `mangle' table to iptables: see the man page for @@ -308,6 +276,19 @@ config IP_NF_MANGLE To compile it as a module, choose M here. If unsure, say N. +config IP_NF_TARGET_CLUSTERIP + tristate "CLUSTERIP target support" + depends on IP_NF_MANGLE + depends on NF_CONNTRACK_IPV4 + depends on NETFILTER_ADVANCED + select NF_CONNTRACK_MARK + help + The CLUSTERIP target allows you to build load-balancing clusters of + network servers without having a dedicated load-balancing + router/server/switch. + + To compile it as a module, choose M here. If unsure, say N. + config IP_NF_TARGET_ECN tristate "ECN target support" depends on IP_NF_MANGLE @@ -324,38 +305,17 @@ config IP_NF_TARGET_ECN To compile it as a module, choose M here. If unsure, say N. config IP_NF_TARGET_TTL - tristate 'TTL target support' - depends on IP_NF_MANGLE - depends on NETFILTER_ADVANCED - help - This option adds a `TTL' target, which enables the user to modify - the TTL value of the IP header. - - While it is safe to decrement/lower the TTL, this target also enables - functionality to increment and set the TTL value of the IP header to - arbitrary values. This is EXTREMELY DANGEROUS since you can easily - create immortal packets that loop forever on the network. - - To compile it as a module, choose M here. If unsure, say N. - -config IP_NF_TARGET_CLUSTERIP - tristate "CLUSTERIP target support (EXPERIMENTAL)" - depends on IP_NF_MANGLE && EXPERIMENTAL - depends on NF_CONNTRACK_IPV4 - depends on NETFILTER_ADVANCED - select NF_CONNTRACK_MARK - help - The CLUSTERIP target allows you to build load-balancing clusters of - network servers without having a dedicated load-balancing - router/server/switch. - - To compile it as a module, choose M here. If unsure, say N. + tristate '"TTL" target support' + depends on NETFILTER_ADVANCED && IP_NF_MANGLE + select NETFILTER_XT_TARGET_HL + ---help--- + This is a backwards-compatible option for the user's convenience + (e.g. when running oldconfig). It selects + CONFIG_NETFILTER_XT_TARGET_HL. # raw + specific targets config IP_NF_RAW tristate 'raw table support (required for NOTRACK/TRACE)' - depends on IP_NF_IPTABLES - depends on NETFILTER_ADVANCED help This option adds a `raw' table to iptables. This table is the very first in the netfilter framework and hooks in at the PREROUTING @@ -367,7 +327,6 @@ config IP_NF_RAW # security table for MAC policy config IP_NF_SECURITY tristate "Security table" - depends on IP_NF_IPTABLES depends on SECURITY depends on NETFILTER_ADVANCED help @@ -376,6 +335,8 @@ config IP_NF_SECURITY If unsure, say N. +endif # IP_NF_IPTABLES + # ARP tables config IP_NF_ARPTABLES tristate "ARP tables support" @@ -388,9 +349,10 @@ config IP_NF_ARPTABLES To compile it as a module, choose M here. If unsure, say N. +if IP_NF_ARPTABLES + config IP_NF_ARPFILTER tristate "ARP packet filtering" - depends on IP_NF_ARPTABLES help ARP packet filtering defines a table `filter', which has a series of rules for simple ARP packet filtering at local input and @@ -401,10 +363,11 @@ config IP_NF_ARPFILTER config IP_NF_ARP_MANGLE tristate "ARP payload mangling" - depends on IP_NF_ARPTABLES help Allows altering the ARP packet payload: source and destination hardware and network addresses. +endif # IP_NF_ARPTABLES + endmenu |