diff options
Diffstat (limited to 'net/ethernet/eth.c')
| -rw-r--r-- | net/ethernet/eth.c | 134 |
1 files changed, 70 insertions, 64 deletions
diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c index dd3db88f8f0..5dc638cad2e 100644 --- a/net/ethernet/eth.c +++ b/net/ethernet/eth.c @@ -58,8 +58,7 @@ #include <net/ipv6.h> #include <net/ip.h> #include <net/dsa.h> -#include <asm/uaccess.h> -#include <asm/system.h> +#include <linux/uaccess.h> __setup("ether=", netdev_boot_setup); @@ -73,16 +72,16 @@ __setup("ether=", netdev_boot_setup); * @len: packet length (<= skb->len) * * - * Set the protocol type. For a packet of type ETH_P_802_3 we put the length - * in here instead. It is up to the 802.2 layer to carry protocol information. + * Set the protocol type. For a packet of type ETH_P_802_3/2 we put the length + * in here instead. */ int eth_header(struct sk_buff *skb, struct net_device *dev, unsigned short type, - const void *daddr, const void *saddr, unsigned len) + const void *daddr, const void *saddr, unsigned int len) { struct ethhdr *eth = (struct ethhdr *)skb_push(skb, ETH_HLEN); - if (type != ETH_P_802_3) + if (type != ETH_P_802_3 && type != ETH_P_802_2) eth->h_proto = htons(type); else eth->h_proto = htons(len); @@ -134,9 +133,9 @@ int eth_rebuild_header(struct sk_buff *skb) return arp_find(eth->h_dest, skb); #endif default: - printk(KERN_DEBUG + netdev_dbg(dev, "%s: unable to resolve type %X addresses.\n", - dev->name, (int)eth->h_proto); + dev->name, ntohs(eth->h_proto)); memcpy(eth->h_source, dev->dev_addr, ETH_ALEN); break; @@ -157,33 +156,24 @@ EXPORT_SYMBOL(eth_rebuild_header); */ __be16 eth_type_trans(struct sk_buff *skb, struct net_device *dev) { - struct ethhdr *eth; - unsigned char *rawp; + unsigned short _service_access_point; + const unsigned short *sap; + const struct ethhdr *eth; skb->dev = dev; skb_reset_mac_header(skb); - skb_pull(skb, ETH_HLEN); + skb_pull_inline(skb, ETH_HLEN); eth = eth_hdr(skb); if (unlikely(is_multicast_ether_addr(eth->h_dest))) { - if (!compare_ether_addr_64bits(eth->h_dest, dev->broadcast)) + if (ether_addr_equal_64bits(eth->h_dest, dev->broadcast)) skb->pkt_type = PACKET_BROADCAST; else skb->pkt_type = PACKET_MULTICAST; } - - /* - * This ALLMULTI check should be redundant by 1.4 - * so don't forget to remove it. - * - * Seems, you forgot to remove it. All silly devices - * seems to set IFF_PROMISC. - */ - - else if (1 /*dev->flags&IFF_PROMISC */ ) { - if (unlikely(compare_ether_addr_64bits(eth->h_dest, dev->dev_addr))) - skb->pkt_type = PACKET_OTHERHOST; - } + else if (unlikely(!ether_addr_equal_64bits(eth->h_dest, + dev->dev_addr))) + skb->pkt_type = PACKET_OTHERHOST; /* * Some variants of DSA tagging don't have an ethertype field @@ -191,23 +181,23 @@ __be16 eth_type_trans(struct sk_buff *skb, struct net_device *dev) * variants has been configured on the receiving interface, * and if so, set skb->protocol without looking at the packet. */ - if (netdev_uses_dsa_tags(dev)) + if (unlikely(netdev_uses_dsa_tags(dev))) return htons(ETH_P_DSA); - if (netdev_uses_trailer_tags(dev)) + + if (unlikely(netdev_uses_trailer_tags(dev))) return htons(ETH_P_TRAILER); - if (ntohs(eth->h_proto) >= 1536) + if (likely(ntohs(eth->h_proto) >= ETH_P_802_3_MIN)) return eth->h_proto; - rawp = skb->data; - /* * This is a magic hack to spot IPX packets. Older Novell breaks * the protocol design and runs IPX over 802.3 without an 802.2 LLC * layer. We look for FFFF which isn't a used 802.2 SSAP/DSAP. This * won't work for fault tolerant netware but does for the rest. */ - if (*(unsigned short *)rawp == 0xFFFF) + sap = skb_header_pointer(skb, 0, sizeof(*sap), &_service_access_point); + if (sap && *sap == 0xFFFF) return htons(ETH_P_802_3); /* @@ -234,11 +224,12 @@ EXPORT_SYMBOL(eth_header_parse); * eth_header_cache - fill cache entry from neighbour * @neigh: source neighbour * @hh: destination cache entry + * @type: Ethernet type field + * * Create an Ethernet header template from the neighbour. */ -int eth_header_cache(const struct neighbour *neigh, struct hh_cache *hh) +int eth_header_cache(const struct neighbour *neigh, struct hh_cache *hh, __be16 type) { - __be16 type = hh->hh_type; struct ethhdr *eth; const struct net_device *dev = neigh->dev; @@ -274,9 +265,40 @@ void eth_header_cache_update(struct hh_cache *hh, EXPORT_SYMBOL(eth_header_cache_update); /** + * eth_prepare_mac_addr_change - prepare for mac change + * @dev: network device + * @p: socket address + */ +int eth_prepare_mac_addr_change(struct net_device *dev, void *p) +{ + struct sockaddr *addr = p; + + if (!(dev->priv_flags & IFF_LIVE_ADDR_CHANGE) && netif_running(dev)) + return -EBUSY; + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + return 0; +} +EXPORT_SYMBOL(eth_prepare_mac_addr_change); + +/** + * eth_commit_mac_addr_change - commit mac change + * @dev: network device + * @p: socket address + */ +void eth_commit_mac_addr_change(struct net_device *dev, void *p) +{ + struct sockaddr *addr = p; + + memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); +} +EXPORT_SYMBOL(eth_commit_mac_addr_change); + +/** * eth_mac_addr - set new Ethernet hardware address * @dev: network device * @p: socket address + * * Change hardware address of device. * * This doesn't change hardware matching, so needs to be overridden @@ -284,13 +306,12 @@ EXPORT_SYMBOL(eth_header_cache_update); */ int eth_mac_addr(struct net_device *dev, void *p) { - struct sockaddr *addr = p; + int ret; - if (netif_running(dev)) - return -EBUSY; - if (!is_valid_ether_addr(addr->sa_data)) - return -EADDRNOTAVAIL; - memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); + ret = eth_prepare_mac_addr_change(dev, p); + if (ret < 0) + return ret; + eth_commit_mac_addr_change(dev, p); return 0; } EXPORT_SYMBOL(eth_mac_addr); @@ -332,6 +353,7 @@ const struct header_ops eth_header_ops ____cacheline_aligned = { /** * ether_setup - setup Ethernet network device * @dev: network device + * * Fill in the fields of the device structure with Ethernet-generic values. */ void ether_setup(struct net_device *dev) @@ -343,6 +365,7 @@ void ether_setup(struct net_device *dev) dev->addr_len = ETH_ALEN; dev->tx_queue_len = 1000; /* Ethernet wants good queues */ dev->flags = IFF_BROADCAST|IFF_MULTICAST; + dev->priv_flags |= IFF_TX_SKB_SHARING; memset(dev->broadcast, 0xFF, ETH_ALEN); @@ -350,10 +373,11 @@ void ether_setup(struct net_device *dev) EXPORT_SYMBOL(ether_setup); /** - * alloc_etherdev_mq - Allocates and sets up an Ethernet device + * alloc_etherdev_mqs - Allocates and sets up an Ethernet device * @sizeof_priv: Size of additional driver-private structure to be allocated * for this Ethernet device - * @queue_count: The number of queues this device has. + * @txqs: The number of TX queues this device has. + * @rxqs: The number of RX queues this device has. * * Fill in the fields of the device structure with Ethernet-generic * values. Basically does everything except registering the device. @@ -363,33 +387,15 @@ EXPORT_SYMBOL(ether_setup); * this private data area. */ -struct net_device *alloc_etherdev_mq(int sizeof_priv, unsigned int queue_count) +struct net_device *alloc_etherdev_mqs(int sizeof_priv, unsigned int txqs, + unsigned int rxqs) { - return alloc_netdev_mq(sizeof_priv, "eth%d", ether_setup, queue_count); -} -EXPORT_SYMBOL(alloc_etherdev_mq); - -static size_t _format_mac_addr(char *buf, int buflen, - const unsigned char *addr, int len) -{ - int i; - char *cp = buf; - - for (i = 0; i < len; i++) { - cp += scnprintf(cp, buflen - (cp - buf), "%02x", addr[i]); - if (i == len - 1) - break; - cp += strlcpy(cp, ":", buflen - (cp - buf)); - } - return cp - buf; + return alloc_netdev_mqs(sizeof_priv, "eth%d", ether_setup, txqs, rxqs); } +EXPORT_SYMBOL(alloc_etherdev_mqs); ssize_t sysfs_format_mac(char *buf, const unsigned char *addr, int len) { - size_t l; - - l = _format_mac_addr(buf, PAGE_SIZE, addr, len); - l += strlcpy(buf + l, "\n", PAGE_SIZE - l); - return ((ssize_t) l); + return scnprintf(buf, PAGE_SIZE, "%*phC\n", len, addr); } EXPORT_SYMBOL(sysfs_format_mac); |