diff options
Diffstat (limited to 'kernel/power/hibernate.c')
| -rw-r--r-- | kernel/power/hibernate.c | 664 |
1 files changed, 402 insertions, 262 deletions
diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c index 657272e91d0..fcc2611d3f1 100644 --- a/kernel/power/hibernate.c +++ b/kernel/power/hibernate.c @@ -5,16 +5,18 @@ * Copyright (c) 2003 Open Source Development Lab * Copyright (c) 2004 Pavel Machek <pavel@ucw.cz> * Copyright (c) 2009 Rafael J. Wysocki, Novell Inc. + * Copyright (C) 2012 Bojan Smojver <bojan@rexursive.com> * * This file is released under the GPLv2. */ +#include <linux/export.h> #include <linux/suspend.h> #include <linux/syscalls.h> #include <linux/reboot.h> #include <linux/string.h> #include <linux/device.h> -#include <linux/kmod.h> +#include <linux/async.h> #include <linux/delay.h> #include <linux/fs.h> #include <linux/mount.h> @@ -23,26 +25,32 @@ #include <linux/cpu.h> #include <linux/freezer.h> #include <linux/gfp.h> -#include <scsi/scsi_scan.h> -#include <asm/suspend.h> +#include <linux/syscore_ops.h> +#include <linux/ctype.h> +#include <linux/genhd.h> +#include <trace/events/power.h> #include "power.h" -static int nocompress = 0; -static int noresume = 0; +static int nocompress; +static int noresume; +static int nohibernate; +static int resume_wait; +static unsigned int resume_delay; static char resume_file[256] = CONFIG_PM_STD_PARTITION; dev_t swsusp_resume_device; sector_t swsusp_resume_block; -int in_suspend __nosavedata = 0; +__visible int in_suspend __nosavedata; enum { HIBERNATION_INVALID, HIBERNATION_PLATFORM, - HIBERNATION_TEST, - HIBERNATION_TESTPROC, HIBERNATION_SHUTDOWN, HIBERNATION_REBOOT, +#ifdef CONFIG_SUSPEND + HIBERNATION_SUSPEND, +#endif /* keep last */ __HIBERNATION_AFTER_LAST }; @@ -51,30 +59,37 @@ enum { static int hibernation_mode = HIBERNATION_SHUTDOWN; -static struct platform_hibernation_ops *hibernation_ops; +bool freezer_test_done; + +static const struct platform_hibernation_ops *hibernation_ops; + +bool hibernation_available(void) +{ + return (nohibernate == 0); +} /** - * hibernation_set_ops - set the global hibernate operations - * @ops: the hibernation operations to use in subsequent hibernation transitions + * hibernation_set_ops - Set the global hibernate operations. + * @ops: Hibernation operations to use in subsequent hibernation transitions. */ - -void hibernation_set_ops(struct platform_hibernation_ops *ops) +void hibernation_set_ops(const struct platform_hibernation_ops *ops) { if (ops && !(ops->begin && ops->end && ops->pre_snapshot && ops->prepare && ops->finish && ops->enter && ops->pre_restore - && ops->restore_cleanup)) { + && ops->restore_cleanup && ops->leave)) { WARN_ON(1); return; } - mutex_lock(&pm_mutex); + lock_system_sleep(); hibernation_ops = ops; if (ops) hibernation_mode = HIBERNATION_PLATFORM; else if (hibernation_mode == HIBERNATION_PLATFORM) hibernation_mode = HIBERNATION_SHUTDOWN; - mutex_unlock(&pm_mutex); + unlock_system_sleep(); } +EXPORT_SYMBOL_GPL(hibernation_set_ops); static bool entering_platform_hibernation; @@ -91,15 +106,6 @@ static void hibernation_debug_sleep(void) mdelay(5000); } -static int hibernation_testmode(int mode) -{ - if (hibernation_mode == mode) { - hibernation_debug_sleep(); - return 1; - } - return 0; -} - static int hibernation_test(int level) { if (pm_test_level == level) { @@ -109,15 +115,13 @@ static int hibernation_test(int level) return 0; } #else /* !CONFIG_PM_DEBUG */ -static int hibernation_testmode(int mode) { return 0; } static int hibernation_test(int level) { return 0; } #endif /* !CONFIG_PM_DEBUG */ /** - * platform_begin - tell the platform driver that we're starting - * hibernation + * platform_begin - Call platform to start hibernation. + * @platform_mode: Whether or not to use the platform driver. */ - static int platform_begin(int platform_mode) { return (platform_mode && hibernation_ops) ? @@ -125,10 +129,9 @@ static int platform_begin(int platform_mode) } /** - * platform_end - tell the platform driver that we've entered the - * working state + * platform_end - Call platform to finish transition to the working state. + * @platform_mode: Whether or not to use the platform driver. */ - static void platform_end(int platform_mode) { if (platform_mode && hibernation_ops) @@ -136,8 +139,11 @@ static void platform_end(int platform_mode) } /** - * platform_pre_snapshot - prepare the machine for hibernation using the - * platform driver if so configured and return an error code if it fails + * platform_pre_snapshot - Call platform to prepare the machine for hibernation. + * @platform_mode: Whether or not to use the platform driver. + * + * Use the platform driver to prepare the system for creating a hibernate image, + * if so configured, and return an error code if that fails. */ static int platform_pre_snapshot(int platform_mode) @@ -147,10 +153,14 @@ static int platform_pre_snapshot(int platform_mode) } /** - * platform_leave - prepare the machine for switching to the normal mode - * of operation using the platform driver (called with interrupts disabled) + * platform_leave - Call platform to prepare a transition to the working state. + * @platform_mode: Whether or not to use the platform driver. + * + * Use the platform driver prepare to prepare the machine for switching to the + * normal mode of operation. + * + * This routine is called on one CPU with interrupts disabled. */ - static void platform_leave(int platform_mode) { if (platform_mode && hibernation_ops) @@ -158,10 +168,14 @@ static void platform_leave(int platform_mode) } /** - * platform_finish - switch the machine to the normal mode of operation - * using the platform driver (must be called after platform_prepare()) + * platform_finish - Call platform to switch the system to the working state. + * @platform_mode: Whether or not to use the platform driver. + * + * Use the platform driver to switch the machine to the normal mode of + * operation. + * + * This routine must be called after platform_prepare(). */ - static void platform_finish(int platform_mode) { if (platform_mode && hibernation_ops) @@ -169,11 +183,15 @@ static void platform_finish(int platform_mode) } /** - * platform_pre_restore - prepare the platform for the restoration from a - * hibernation image. If the restore fails after this function has been - * called, platform_restore_cleanup() must be called. + * platform_pre_restore - Prepare for hibernate image restoration. + * @platform_mode: Whether or not to use the platform driver. + * + * Use the platform driver to prepare the system for resume from a hibernation + * image. + * + * If the restore fails after this function has been called, + * platform_restore_cleanup() must be called. */ - static int platform_pre_restore(int platform_mode) { return (platform_mode && hibernation_ops) ? @@ -181,12 +199,16 @@ static int platform_pre_restore(int platform_mode) } /** - * platform_restore_cleanup - switch the platform to the normal mode of - * operation after a failing restore. If platform_pre_restore() has been - * called before the failing restore, this function must be called too, - * regardless of the result of platform_pre_restore(). + * platform_restore_cleanup - Switch to the working state after failing restore. + * @platform_mode: Whether or not to use the platform driver. + * + * Use the platform driver to switch the system to the normal mode of operation + * after a failing restore. + * + * If platform_pre_restore() has been called before the failing restore, this + * function must be called too, regardless of the result of + * platform_pre_restore(). */ - static void platform_restore_cleanup(int platform_mode) { if (platform_mode && hibernation_ops) @@ -194,10 +216,9 @@ static void platform_restore_cleanup(int platform_mode) } /** - * platform_recover - recover the platform from a failure to suspend - * devices. + * platform_recover - Recover from a failure to suspend devices. + * @platform_mode: Whether or not to use the platform driver. */ - static void platform_recover(int platform_mode) { if (platform_mode && hibernation_ops && hibernation_ops->recover) @@ -205,55 +226,51 @@ static void platform_recover(int platform_mode) } /** - * swsusp_show_speed - print the time elapsed between two events. - * @start: Starting event. - * @stop: Final event. - * @nr_pages - number of pages processed between @start and @stop - * @msg - introductory message to print + * swsusp_show_speed - Print time elapsed between two events during hibernation. + * @start: Starting event. + * @stop: Final event. + * @nr_pages: Number of memory pages processed between @start and @stop. + * @msg: Additional diagnostic message to print. */ - void swsusp_show_speed(struct timeval *start, struct timeval *stop, unsigned nr_pages, char *msg) { - s64 elapsed_centisecs64; - int centisecs; - int k; - int kps; + u64 elapsed_centisecs64; + unsigned int centisecs; + unsigned int k; + unsigned int kps; elapsed_centisecs64 = timeval_to_ns(stop) - timeval_to_ns(start); + /* + * If "(s64)elapsed_centisecs64 < 0", it will print long elapsed time, + * it is obvious enough for what went wrong. + */ do_div(elapsed_centisecs64, NSEC_PER_SEC / 100); centisecs = elapsed_centisecs64; if (centisecs == 0) centisecs = 1; /* avoid div-by-zero */ k = nr_pages * (PAGE_SIZE / 1024); kps = (k * 100) / centisecs; - printk(KERN_INFO "PM: %s %d kbytes in %d.%02d seconds (%d.%02d MB/s)\n", + printk(KERN_INFO "PM: %s %u kbytes in %u.%02u seconds (%u.%02u MB/s)\n", msg, k, centisecs / 100, centisecs % 100, kps / 1000, (kps % 1000) / 10); } /** - * create_image - freeze devices that need to be frozen with interrupts - * off, create the hibernation image and thaw those devices. Control - * reappears in this routine after a restore. + * create_image - Create a hibernation image. + * @platform_mode: Whether or not to use the platform driver. + * + * Execute device drivers' "late" and "noirq" freeze callbacks, create a + * hibernation image and run the drivers' "noirq" and "early" thaw callbacks. + * + * Control reappears in this routine after the subsequent restore. */ - static int create_image(int platform_mode) { int error; - error = arch_prepare_suspend(); - if (error) - return error; - - /* At this point, dpm_suspend_start() has been called, but *not* - * dpm_suspend_noirq(). We *must* call dpm_suspend_noirq() now. - * Otherwise, drivers for some devices (e.g. interrupt controllers) - * become desynchronized with the actual state of the hardware - * at resume time, and evil weirdness ensues. - */ - error = dpm_suspend_noirq(PMSG_FREEZE); + error = dpm_suspend_end(PMSG_FREEZE); if (error) { printk(KERN_ERR "PM: Some devices failed to power down, " "aborting hibernation\n"); @@ -265,40 +282,38 @@ static int create_image(int platform_mode) goto Platform_finish; error = disable_nonboot_cpus(); - if (error || hibernation_test(TEST_CPUS) - || hibernation_testmode(HIBERNATION_TEST)) + if (error || hibernation_test(TEST_CPUS)) goto Enable_cpus; local_irq_disable(); - error = sysdev_suspend(PMSG_FREEZE); + error = syscore_suspend(); if (error) { printk(KERN_ERR "PM: Some system devices failed to power down, " "aborting hibernation\n"); goto Enable_irqs; } - if (hibernation_test(TEST_CORE) || !pm_check_wakeup_events()) + if (hibernation_test(TEST_CORE) || pm_wakeup_pending()) goto Power_up; in_suspend = 1; save_processor_state(); + trace_suspend_resume(TPS("machine_suspend"), PM_EVENT_HIBERNATE, true); error = swsusp_arch_suspend(); + trace_suspend_resume(TPS("machine_suspend"), PM_EVENT_HIBERNATE, false); if (error) printk(KERN_ERR "PM: Error %d creating hibernation image\n", error); /* Restore control flow magically appears here */ restore_processor_state(); - if (!in_suspend) { + if (!in_suspend) events_check_enabled = false; - platform_leave(platform_mode); - } + + platform_leave(platform_mode); Power_up: - sysdev_resume(); - /* NOTE: dpm_resume_noirq() is just a resume() for devices - * that suspended with irqs off ... no overall powerup. - */ + syscore_resume(); Enable_irqs: local_irq_enable(); @@ -309,25 +324,22 @@ static int create_image(int platform_mode) Platform_finish: platform_finish(platform_mode); - dpm_resume_noirq(in_suspend ? + dpm_resume_start(in_suspend ? (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE); return error; } /** - * hibernation_snapshot - quiesce devices and create the hibernation - * snapshot image. - * @platform_mode - if set, use the platform driver, if available, to - * prepare the platform firmware for the power transition. + * hibernation_snapshot - Quiesce devices and create a hibernation image. + * @platform_mode: If set, use platform driver to prepare for the transition. * - * Must be called with pm_mutex held + * This routine must be called with pm_mutex held. */ - int hibernation_snapshot(int platform_mode) { + pm_message_t msg; int error; - gfp_t saved_mask; error = platform_begin(platform_mode); if (error) @@ -338,49 +350,82 @@ int hibernation_snapshot(int platform_mode) if (error) goto Close; - suspend_console(); - saved_mask = clear_gfp_allowed_mask(GFP_IOFS); - error = dpm_suspend_start(PMSG_FREEZE); + error = freeze_kernel_threads(); if (error) - goto Recover_platform; + goto Cleanup; - if (hibernation_test(TEST_DEVICES)) - goto Recover_platform; + if (hibernation_test(TEST_FREEZER)) { - error = create_image(platform_mode); - /* Control returns here after successful restore */ + /* + * Indicate to the caller that we are returning due to a + * successful freezer test. + */ + freezer_test_done = true; + goto Thaw; + } + + error = dpm_prepare(PMSG_FREEZE); + if (error) { + dpm_complete(PMSG_RECOVER); + goto Thaw; + } + + suspend_console(); + ftrace_stop(); + pm_restrict_gfp_mask(); + + error = dpm_suspend(PMSG_FREEZE); + + if (error || hibernation_test(TEST_DEVICES)) + platform_recover(platform_mode); + else + error = create_image(platform_mode); + + /* + * In the case that we call create_image() above, the control + * returns here (1) after the image has been created or the + * image creation has failed and (2) after a successful restore. + */ - Resume_devices: /* We may need to release the preallocated image pages here. */ if (error || !in_suspend) swsusp_free(); - dpm_resume_end(in_suspend ? - (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE); - set_gfp_allowed_mask(saved_mask); + msg = in_suspend ? (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE; + dpm_resume(msg); + + if (error || !in_suspend) + pm_restore_gfp_mask(); + + ftrace_start(); resume_console(); + dpm_complete(msg); + Close: platform_end(platform_mode); return error; - Recover_platform: - platform_recover(platform_mode); - goto Resume_devices; + Thaw: + thaw_kernel_threads(); + Cleanup: + swsusp_free(); + goto Close; } /** - * resume_target_kernel - prepare devices that need to be suspended with - * interrupts off, restore the contents of highmem that have not been - * restored yet from the image and run the low level code that will restore - * the remaining contents of memory and switch to the just restored target - * kernel. + * resume_target_kernel - Restore system state from a hibernation image. + * @platform_mode: Whether or not to use the platform driver. + * + * Execute device drivers' "noirq" and "late" freeze callbacks, restore the + * contents of highmem that have not been restored yet from the image and run + * the low-level code that will restore the remaining contents of memory and + * switch to the just restored target kernel. */ - static int resume_target_kernel(bool platform_mode) { int error; - error = dpm_suspend_noirq(PMSG_QUIESCE); + error = dpm_suspend_end(PMSG_QUIESCE); if (error) { printk(KERN_ERR "PM: Some devices failed to power down, " "aborting resume\n"); @@ -397,34 +442,36 @@ static int resume_target_kernel(bool platform_mode) local_irq_disable(); - error = sysdev_suspend(PMSG_QUIESCE); + error = syscore_suspend(); if (error) goto Enable_irqs; - /* We'll ignore saved state, but this gets preempt count (etc) right */ save_processor_state(); error = restore_highmem(); if (!error) { error = swsusp_arch_resume(); /* * The code below is only ever reached in case of a failure. - * Otherwise execution continues at place where - * swsusp_arch_suspend() was called + * Otherwise, execution continues at the place where + * swsusp_arch_suspend() was called. */ BUG_ON(!error); - /* This call to restore_highmem() undos the previous one */ + /* + * This call to restore_highmem() reverts the changes made by + * the previous one. + */ restore_highmem(); } /* * The only reason why swsusp_arch_resume() can fail is memory being * very tight, so we have to free it as soon as we can to avoid - * subsequent failures + * subsequent failures. */ swsusp_free(); restore_processor_state(); touch_softlockup_watchdog(); - sysdev_resume(); + syscore_resume(); Enable_irqs: local_irq_enable(); @@ -435,48 +482,44 @@ static int resume_target_kernel(bool platform_mode) Cleanup: platform_restore_cleanup(platform_mode); - dpm_resume_noirq(PMSG_RECOVER); + dpm_resume_start(PMSG_RECOVER); return error; } /** - * hibernation_restore - quiesce devices and restore the hibernation - * snapshot image. If successful, control returns in hibernation_snaphot() - * @platform_mode - if set, use the platform driver, if available, to - * prepare the platform firmware for the transition. + * hibernation_restore - Quiesce devices and restore from a hibernation image. + * @platform_mode: If set, use platform driver to prepare for the transition. * - * Must be called with pm_mutex held + * This routine must be called with pm_mutex held. If it is successful, control + * reappears in the restored target kernel in hibernation_snapshot(). */ - int hibernation_restore(int platform_mode) { int error; - gfp_t saved_mask; pm_prepare_console(); suspend_console(); - saved_mask = clear_gfp_allowed_mask(GFP_IOFS); + ftrace_stop(); + pm_restrict_gfp_mask(); error = dpm_suspend_start(PMSG_QUIESCE); if (!error) { error = resume_target_kernel(platform_mode); dpm_resume_end(PMSG_RECOVER); } - set_gfp_allowed_mask(saved_mask); + pm_restore_gfp_mask(); + ftrace_start(); resume_console(); pm_restore_console(); return error; } /** - * hibernation_platform_enter - enter the hibernation state using the - * platform driver (if available) + * hibernation_platform_enter - Power off the system using the platform driver. */ - int hibernation_platform_enter(void) { int error; - gfp_t saved_mask; if (!hibernation_ops) return -ENOSYS; @@ -492,7 +535,7 @@ int hibernation_platform_enter(void) entering_platform_hibernation = true; suspend_console(); - saved_mask = clear_gfp_allowed_mask(GFP_IOFS); + ftrace_stop(); error = dpm_suspend_start(PMSG_HIBERNATE); if (error) { if (hibernation_ops->recover) @@ -500,7 +543,7 @@ int hibernation_platform_enter(void) goto Resume_devices; } - error = dpm_suspend_noirq(PMSG_HIBERNATE); + error = dpm_suspend_end(PMSG_HIBERNATE); if (error) goto Resume_devices; @@ -513,8 +556,8 @@ int hibernation_platform_enter(void) goto Platform_finish; local_irq_disable(); - sysdev_suspend(PMSG_HIBERNATE); - if (!pm_check_wakeup_events()) { + syscore_suspend(); + if (pm_wakeup_pending()) { error = -EAGAIN; goto Power_up; } @@ -524,19 +567,19 @@ int hibernation_platform_enter(void) while (1); Power_up: - sysdev_resume(); + syscore_resume(); local_irq_enable(); enable_nonboot_cpus(); Platform_finish: hibernation_ops->finish(); - dpm_resume_noirq(PMSG_RESTORE); + dpm_resume_start(PMSG_RESTORE); Resume_devices: entering_platform_hibernation = false; dpm_resume_end(PMSG_RESTORE); - set_gfp_allowed_mask(saved_mask); + ftrace_start(); resume_console(); Close: @@ -546,26 +589,47 @@ int hibernation_platform_enter(void) } /** - * power_down - Shut the machine down for hibernation. + * power_down - Shut the machine down for hibernation. * - * Use the platform driver, if configured so; otherwise try - * to power off or reboot. + * Use the platform driver, if configured, to put the system into the sleep + * state corresponding to hibernation, or try to power it off or reboot, + * depending on the value of hibernation_mode. */ - static void power_down(void) { +#ifdef CONFIG_SUSPEND + int error; +#endif + switch (hibernation_mode) { - case HIBERNATION_TEST: - case HIBERNATION_TESTPROC: - break; case HIBERNATION_REBOOT: kernel_restart(NULL); break; case HIBERNATION_PLATFORM: hibernation_platform_enter(); case HIBERNATION_SHUTDOWN: - kernel_power_off(); + if (pm_power_off) + kernel_power_off(); break; +#ifdef CONFIG_SUSPEND + case HIBERNATION_SUSPEND: + error = suspend_devices_and_enter(PM_SUSPEND_MEM); + if (error) { + if (hibernation_ops) + hibernation_mode = HIBERNATION_PLATFORM; + else + hibernation_mode = HIBERNATION_SHUTDOWN; + power_down(); + } + /* + * Restore swap signature. + */ + error = swsusp_unmark(); + if (error) + printk(KERN_ERR "PM: Swap will be unusable! " + "Try swapon -a.\n"); + return; +#endif } kernel_halt(); /* @@ -573,29 +637,23 @@ static void power_down(void) * corruption after resume. */ printk(KERN_CRIT "PM: Please power down manually\n"); - while(1); -} - -static int prepare_processes(void) -{ - int error = 0; - - if (freeze_processes()) { - error = -EBUSY; - thaw_processes(); - } - return error; + while (1) + cpu_relax(); } /** - * hibernate - The granpappy of the built-in hibernation management + * hibernate - Carry out system hibernation, including saving the image. */ - int hibernate(void) { int error; - mutex_lock(&pm_mutex); + if (!hibernation_available()) { + pr_debug("PM: Hibernation not available.\n"); + return -EPERM; + } + + lock_system_sleep(); /* The snapshot device should not be opened while we're running */ if (!atomic_add_unless(&snapshot_device_available, -1, 0)) { error = -EBUSY; @@ -607,32 +665,23 @@ int hibernate(void) if (error) goto Exit; - error = usermodehelper_disable(); - if (error) - goto Exit; - - /* Allocate memory management structures */ - error = create_basic_memory_bitmaps(); - if (error) - goto Exit; - printk(KERN_INFO "PM: Syncing filesystems ... "); sys_sync(); printk("done.\n"); - error = prepare_processes(); + error = freeze_processes(); if (error) - goto Finish; - - if (hibernation_test(TEST_FREEZER)) - goto Thaw; + goto Exit; - if (hibernation_testmode(HIBERNATION_TESTPROC)) + lock_device_hotplug(); + /* Allocate memory management structures */ + error = create_basic_memory_bitmaps(); + if (error) goto Thaw; error = hibernation_snapshot(hibernation_mode == HIBERNATION_PLATFORM); - if (error) - goto Thaw; + if (error || freezer_test_done) + goto Free_bitmaps; if (in_suspend) { unsigned int flags = 0; @@ -641,42 +690,53 @@ int hibernate(void) flags |= SF_PLATFORM_MODE; if (nocompress) flags |= SF_NOCOMPRESS_MODE; + else + flags |= SF_CRC32_MODE; + pr_debug("PM: writing image.\n"); error = swsusp_write(flags); swsusp_free(); if (!error) power_down(); + in_suspend = 0; + pm_restore_gfp_mask(); } else { pr_debug("PM: Image restored successfully.\n"); } + Free_bitmaps: + free_basic_memory_bitmaps(); Thaw: + unlock_device_hotplug(); thaw_processes(); - Finish: - free_basic_memory_bitmaps(); - usermodehelper_enable(); + + /* Don't bother checking whether freezer_test_done is true */ + freezer_test_done = false; Exit: pm_notifier_call_chain(PM_POST_HIBERNATION); pm_restore_console(); atomic_inc(&snapshot_device_available); Unlock: - mutex_unlock(&pm_mutex); + unlock_system_sleep(); return error; } /** - * software_resume - Resume from a saved image. + * software_resume - Resume from a saved hibernation image. + * + * This routine is called as a late initcall, when all devices have been + * discovered and initialized already. * - * Called as a late_initcall (so all devices are discovered and - * initialized), we call swsusp to see if we have a saved image or not. - * If so, we quiesce devices, the restore the saved image. We will - * return above (in hibernate() ) if everything goes well. - * Otherwise, we fail gracefully and return to the normally - * scheduled program. + * The image reading code is called to see if there is a hibernation image + * available for reading. If that is the case, devices are quiesced and the + * contents of memory is restored from the saved image. * + * If this is successful, control reappears in the restored target kernel in + * hibernation_snaphot() which returns to hibernate(). Otherwise, the routine + * attempts to recover gracefully and make the kernel return to the normal mode + * of operation. */ - static int software_resume(void) { int error; @@ -685,7 +745,7 @@ static int software_resume(void) /* * If the user said "noresume".. bail out early. */ - if (noresume) + if (noresume || !hibernation_available()) return 0; /* @@ -710,20 +770,37 @@ static int software_resume(void) pr_debug("PM: Checking hibernation image partition %s\n", resume_file); + if (resume_delay) { + printk(KERN_INFO "Waiting %dsec before reading resume device...\n", + resume_delay); + ssleep(resume_delay); + } + /* Check if the device is there */ swsusp_resume_device = name_to_dev_t(resume_file); + + /* + * name_to_dev_t is ineffective to verify parition if resume_file is in + * integer format. (e.g. major:minor) + */ + if (isdigit(resume_file[0]) && resume_wait) { + int partno; + while (!get_gendisk(swsusp_resume_device, &partno)) + msleep(10); + } + if (!swsusp_resume_device) { /* * Some device discovery might still be in progress; we need * to wait for this to finish. */ wait_for_device_probe(); - /* - * We can't depend on SCSI devices being available after loading - * one of their modules until scsi_complete_async_scans() is - * called and the resume device usually is a SCSI one. - */ - scsi_complete_async_scans(); + + if (resume_wait) { + while ((swsusp_resume_device = name_to_dev_t(resume_file)) == 0) + msleep(10); + async_synchronize_full(); + } swsusp_resume_device = name_to_dev_t(resume_file); if (!swsusp_resume_device) { @@ -751,24 +828,19 @@ static int software_resume(void) pm_prepare_console(); error = pm_notifier_call_chain(PM_RESTORE_PREPARE); if (error) - goto close_finish; + goto Close_Finish; - error = usermodehelper_disable(); + pr_debug("PM: Preparing processes for restore.\n"); + error = freeze_processes(); if (error) - goto close_finish; + goto Close_Finish; + + pr_debug("PM: Loading hibernation image.\n"); + lock_device_hotplug(); error = create_basic_memory_bitmaps(); if (error) - goto close_finish; - - pr_debug("PM: Preparing processes for restore.\n"); - error = prepare_processes(); - if (error) { - swsusp_close(FMODE_READ); - goto Done; - } - - pr_debug("PM: Loading hibernation image.\n"); + goto Thaw; error = swsusp_read(&flags); swsusp_close(FMODE_READ); @@ -777,10 +849,10 @@ static int software_resume(void) printk(KERN_ERR "PM: Failed to load hibernation image, recovering.\n"); swsusp_free(); - thaw_processes(); - Done: free_basic_memory_bitmaps(); - usermodehelper_enable(); + Thaw: + unlock_device_hotplug(); + thaw_processes(); Finish: pm_notifier_call_chain(PM_POST_RESTORE); pm_restore_console(); @@ -790,46 +862,47 @@ static int software_resume(void) mutex_unlock(&pm_mutex); pr_debug("PM: Hibernation image not present or could not be loaded.\n"); return error; -close_finish: + Close_Finish: swsusp_close(FMODE_READ); goto Finish; } -late_initcall(software_resume); +late_initcall_sync(software_resume); static const char * const hibernation_modes[] = { [HIBERNATION_PLATFORM] = "platform", [HIBERNATION_SHUTDOWN] = "shutdown", [HIBERNATION_REBOOT] = "reboot", - [HIBERNATION_TEST] = "test", - [HIBERNATION_TESTPROC] = "testproc", +#ifdef CONFIG_SUSPEND + [HIBERNATION_SUSPEND] = "suspend", +#endif }; -/** - * disk - Control hibernation mode - * - * Suspend-to-disk can be handled in several ways. We have a few options - * for putting the system to sleep - using the platform driver (e.g. ACPI - * or other hibernation_ops), powering off the system or rebooting the - * system (for testing) as well as the two test modes. +/* + * /sys/power/disk - Control hibernation mode. * - * The system can support 'platform', and that is known a priori (and - * encoded by the presence of hibernation_ops). However, the user may - * choose 'shutdown' or 'reboot' as alternatives, as well as one fo the - * test modes, 'test' or 'testproc'. + * Hibernation can be handled in several ways. There are a few different ways + * to put the system into the sleep state: using the platform driver (e.g. ACPI + * or other hibernation_ops), powering it off or rebooting it (for testing + * mostly). * - * show() will display what the mode is currently set to. - * store() will accept one of + * The sysfs file /sys/power/disk provides an interface for selecting the + * hibernation mode to use. Reading from this file causes the available modes + * to be printed. There are 3 modes that can be supported: * * 'platform' * 'shutdown' * 'reboot' - * 'test' - * 'testproc' * - * It will only change to 'platform' if the system - * supports it (as determined by having hibernation_ops). + * If a platform hibernation driver is in use, 'platform' will be supported + * and will be used by default. Otherwise, 'shutdown' will be used by default. + * The selected option (i.e. the one corresponding to the current value of + * hibernation_mode) is enclosed by a square bracket. + * + * To select a given hibernation mode it is necessary to write the mode's + * string representation (as returned by reading from /sys/power/disk) back + * into /sys/power/disk. */ static ssize_t disk_show(struct kobject *kobj, struct kobj_attribute *attr, @@ -838,14 +911,18 @@ static ssize_t disk_show(struct kobject *kobj, struct kobj_attribute *attr, int i; char *start = buf; + if (!hibernation_available()) + return sprintf(buf, "[disabled]\n"); + for (i = HIBERNATION_FIRST; i <= HIBERNATION_MAX; i++) { if (!hibernation_modes[i]) continue; switch (i) { case HIBERNATION_SHUTDOWN: case HIBERNATION_REBOOT: - case HIBERNATION_TEST: - case HIBERNATION_TESTPROC: +#ifdef CONFIG_SUSPEND + case HIBERNATION_SUSPEND: +#endif break; case HIBERNATION_PLATFORM: if (hibernation_ops) @@ -862,7 +939,6 @@ static ssize_t disk_show(struct kobject *kobj, struct kobj_attribute *attr, return buf-start; } - static ssize_t disk_store(struct kobject *kobj, struct kobj_attribute *attr, const char *buf, size_t n) { @@ -872,10 +948,13 @@ static ssize_t disk_store(struct kobject *kobj, struct kobj_attribute *attr, char *p; int mode = HIBERNATION_INVALID; + if (!hibernation_available()) + return -EPERM; + p = memchr(buf, '\n', n); len = p ? p - buf : n; - mutex_lock(&pm_mutex); + lock_system_sleep(); for (i = HIBERNATION_FIRST; i <= HIBERNATION_MAX; i++) { if (len == strlen(hibernation_modes[i]) && !strncmp(buf, hibernation_modes[i], len)) { @@ -887,8 +966,9 @@ static ssize_t disk_store(struct kobject *kobj, struct kobj_attribute *attr, switch (mode) { case HIBERNATION_SHUTDOWN: case HIBERNATION_REBOOT: - case HIBERNATION_TEST: - case HIBERNATION_TESTPROC: +#ifdef CONFIG_SUSPEND + case HIBERNATION_SUSPEND: +#endif hibernation_mode = mode; break; case HIBERNATION_PLATFORM: @@ -903,7 +983,7 @@ static ssize_t disk_store(struct kobject *kobj, struct kobj_attribute *attr, if (!error) pr_debug("PM: Hibernation mode set to '%s'\n", hibernation_modes[mode]); - mutex_unlock(&pm_mutex); + unlock_system_sleep(); return error ? error : n; } @@ -919,26 +999,28 @@ static ssize_t resume_show(struct kobject *kobj, struct kobj_attribute *attr, static ssize_t resume_store(struct kobject *kobj, struct kobj_attribute *attr, const char *buf, size_t n) { - unsigned int maj, min; dev_t res; - int ret = -EINVAL; + int len = n; + char *name; - if (sscanf(buf, "%u:%u", &maj, &min) != 2) - goto out; + if (len && buf[len-1] == '\n') + len--; + name = kstrndup(buf, len, GFP_KERNEL); + if (!name) + return -ENOMEM; - res = MKDEV(maj,min); - if (maj != MAJOR(res) || min != MINOR(res)) - goto out; + res = name_to_dev_t(name); + kfree(name); + if (!res) + return -EINVAL; - mutex_lock(&pm_mutex); + lock_system_sleep(); swsusp_resume_device = res; - mutex_unlock(&pm_mutex); + unlock_system_sleep(); printk(KERN_INFO "PM: Starting manual resume from disk\n"); noresume = 0; software_resume(); - ret = n; - out: - return ret; + return n; } power_attr(resume); @@ -964,10 +1046,33 @@ static ssize_t image_size_store(struct kobject *kobj, struct kobj_attribute *att power_attr(image_size); +static ssize_t reserved_size_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + return sprintf(buf, "%lu\n", reserved_size); +} + +static ssize_t reserved_size_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t n) +{ + unsigned long size; + + if (sscanf(buf, "%lu", &size) == 1) { + reserved_size = size; + return n; + } + + return -EINVAL; +} + +power_attr(reserved_size); + static struct attribute * g[] = { &disk_attr.attr, &resume_attr.attr, &image_size_attr.attr, + &reserved_size_attr.attr, NULL, }; @@ -1013,6 +1118,10 @@ static int __init hibernate_setup(char *str) noresume = 1; else if (!strncmp(str, "nocompress", 10)) nocompress = 1; + else if (!strncmp(str, "no", 2)) { + noresume = 1; + nohibernate = 1; + } return 1; } @@ -1022,7 +1131,38 @@ static int __init noresume_setup(char *str) return 1; } +static int __init resumewait_setup(char *str) +{ + resume_wait = 1; + return 1; +} + +static int __init resumedelay_setup(char *str) +{ + int rc = kstrtouint(str, 0, &resume_delay); + + if (rc) + return rc; + return 1; +} + +static int __init nohibernate_setup(char *str) +{ + noresume = 1; + nohibernate = 1; + return 1; +} + +static int __init kaslr_nohibernate_setup(char *str) +{ + return nohibernate_setup(str); +} + __setup("noresume", noresume_setup); __setup("resume_offset=", resume_offset_setup); __setup("resume=", resume_setup); __setup("hibernate=", hibernate_setup); +__setup("resumewait", resumewait_setup); +__setup("resumedelay=", resumedelay_setup); +__setup("nohibernate", nohibernate_setup); +__setup("kaslr", kaslr_nohibernate_setup); |