diff options
Diffstat (limited to 'init')
| -rw-r--r-- | init/Kconfig | 259 | ||||
| -rw-r--r-- | init/do_mounts_rd.c | 14 | ||||
| -rw-r--r-- | init/initramfs.c | 1 |
3 files changed, 147 insertions, 127 deletions
diff --git a/init/Kconfig b/init/Kconfig index a724a149bf3..f068071fcc5 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -238,6 +238,98 @@ config AUDIT_TREE def_bool y depends on AUDITSYSCALL && INOTIFY +menu "RCU Subsystem" + +choice + prompt "RCU Implementation" + default CLASSIC_RCU + +config CLASSIC_RCU + bool "Classic RCU" + help + This option selects the classic RCU implementation that is + designed for best read-side performance on non-realtime + systems. + + Select this option if you are unsure. + +config TREE_RCU + bool "Tree-based hierarchical RCU" + help + This option selects the RCU implementation that is + designed for very large SMP system with hundreds or + thousands of CPUs. + +config PREEMPT_RCU + bool "Preemptible RCU" + depends on PREEMPT + help + This option reduces the latency of the kernel by making certain + RCU sections preemptible. Normally RCU code is non-preemptible, if + this option is selected then read-only RCU sections become + preemptible. This helps latency, but may expose bugs due to + now-naive assumptions about each RCU read-side critical section + remaining on a given CPU through its execution. + +endchoice + +config RCU_TRACE + bool "Enable tracing for RCU" + depends on TREE_RCU || PREEMPT_RCU + help + This option provides tracing in RCU which presents stats + in debugfs for debugging RCU implementation. + + Say Y here if you want to enable RCU tracing + Say N if you are unsure. + +config RCU_FANOUT + int "Tree-based hierarchical RCU fanout value" + range 2 64 if 64BIT + range 2 32 if !64BIT + depends on TREE_RCU + default 64 if 64BIT + default 32 if !64BIT + help + This option controls the fanout of hierarchical implementations + of RCU, allowing RCU to work efficiently on machines with + large numbers of CPUs. This value must be at least the cube + root of NR_CPUS, which allows NR_CPUS up to 32,768 for 32-bit + systems and up to 262,144 for 64-bit systems. + + Select a specific number if testing RCU itself. + Take the default if unsure. + +config RCU_FANOUT_EXACT + bool "Disable tree-based hierarchical RCU auto-balancing" + depends on TREE_RCU + default n + help + This option forces use of the exact RCU_FANOUT value specified, + regardless of imbalances in the hierarchy. This is useful for + testing RCU itself, and might one day be useful on systems with + strong NUMA behavior. + + Without RCU_FANOUT_EXACT, the code will balance the hierarchy. + + Say N if unsure. + +config TREE_RCU_TRACE + def_bool RCU_TRACE && TREE_RCU + select DEBUG_FS + help + This option provides tracing for the TREE_RCU implementation, + permitting Makefile to trivially select kernel/rcutree_trace.c. + +config PREEMPT_RCU_TRACE + def_bool RCU_TRACE && PREEMPT_RCU + select DEBUG_FS + help + This option provides tracing for the PREEMPT_RCU implementation, + permitting Makefile to trivially select kernel/rcupreempt_trace.c. + +endmenu # "RCU Subsystem" + config IKCONFIG tristate "Kernel .config support" ---help--- @@ -323,26 +415,26 @@ config CGROUP_SCHED This option allows you to create arbitrary task groups using the "cgroup" pseudo filesystem and control the cpu bandwidth allocated to each such task group. - Refer to Documentation/cgroups.txt for more information - on "cgroup" pseudo filesystem. + Refer to Documentation/cgroups/cgroups.txt for more + information on "cgroup" pseudo filesystem. endchoice -menu "Control Group support" -config CGROUPS - bool "Control Group support" +menuconfig CGROUPS + boolean "Control Group support" help - This option add support for grouping sets of processes together, for + This option adds support for grouping sets of processes together, for use with process control subsystems such as Cpusets, CFS, memory controls or device isolation. See - - Documentation/cpusets.txt (Cpusets) - Documentation/scheduler/sched-design-CFS.txt (CFS) - - Documentation/cgroups/ (features for grouping, isolation) - - Documentation/controllers/ (features for resource control) + - Documentation/cgroups/ (features for grouping, isolation + and resource control) Say N if unsure. +if CGROUPS + config CGROUP_DEBUG bool "Example debug cgroup subsystem" depends on CGROUPS @@ -350,24 +442,24 @@ config CGROUP_DEBUG help This option enables a simple cgroup subsystem that exports useful debugging information about the cgroups - framework + framework. - Say N if unsure + Say N if unsure. config CGROUP_NS - bool "Namespace cgroup subsystem" - depends on CGROUPS - help - Provides a simple namespace cgroup subsystem to - provide hierarchical naming of sets of namespaces, - for instance virtual servers and checkpoint/restart - jobs. + bool "Namespace cgroup subsystem" + depends on CGROUPS + help + Provides a simple namespace cgroup subsystem to + provide hierarchical naming of sets of namespaces, + for instance virtual servers and checkpoint/restart + jobs. config CGROUP_FREEZER - bool "control group freezer subsystem" - depends on CGROUPS - help - Provides a way to freeze and unfreeze all tasks in a + bool "Freezer cgroup subsystem" + depends on CGROUPS + help + Provides a way to freeze and unfreeze all tasks in a cgroup. config CGROUP_DEVICE @@ -388,18 +480,23 @@ config CPUSETS Say N if unsure. +config PROC_PID_CPUSET + bool "Include legacy /proc/<pid>/cpuset file" + depends on CPUSETS + default y + config CGROUP_CPUACCT bool "Simple CPU accounting cgroup subsystem" depends on CGROUPS help Provides a simple Resource Controller for monitoring the - total CPU consumed by the tasks in a cgroup + total CPU consumed by the tasks in a cgroup. config RESOURCE_COUNTERS bool "Resource counters" help This option enables controller independent resource accounting - infrastructure that works with cgroups + infrastructure that works with cgroups. depends on CGROUPS config CGROUP_MEM_RES_CTLR @@ -425,9 +522,6 @@ config CGROUP_MEM_RES_CTLR This config option also selects MM_OWNER config option, which could in turn add some fork/exit overhead. -config MM_OWNER - bool - config CGROUP_MEM_RES_CTLR_SWAP bool "Memory Resource Controller Swap Extension(EXPERIMENTAL)" depends on CGROUP_MEM_RES_CTLR && SWAP && EXPERIMENTAL @@ -444,8 +538,10 @@ config CGROUP_MEM_RES_CTLR_SWAP there will be no overhead from this. Even when you set this config=y, if boot option "noswapaccount" is set, swap will not be accounted. +endif # CGROUPS -endmenu +config MM_OWNER + bool config SYSFS_DEPRECATED bool @@ -483,11 +579,6 @@ config SYSFS_DEPRECATED_V2 if the original kernel, that came with your distribution, has this option set to N. -config PROC_PID_CPUSET - bool "Include legacy /proc/<pid>/cpuset file" - depends on CPUSETS - default y - config RELAY bool "Kernel->user space relay support (formerly relayfs)" help @@ -542,6 +633,14 @@ config PID_NS Unless you want to work with an experimental feature say N here. +config NET_NS + bool "Network namespace" + default n + depends on NAMESPACES && EXPERIMENTAL && NET + help + Allow user space to create what appear to be multiple instances + of the network stack. + config BLK_DEV_INITRD bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support" depends on BROKEN || !FRV @@ -626,13 +725,6 @@ config KALLSYMS_ALL Say N. -config KALLSYMS_STRIP_GENERATED - bool "Strip machine generated symbols from kallsyms" - depends on KALLSYMS_ALL - default y - help - Say N if you want kallsyms to retain even machine generated symbols. - config KALLSYMS_EXTRA_PASS bool "Do an extra kallsyms pass" depends on KALLSYMS @@ -973,90 +1065,3 @@ source "block/Kconfig" config PREEMPT_NOTIFIERS bool -choice - prompt "RCU Implementation" - default CLASSIC_RCU - -config CLASSIC_RCU - bool "Classic RCU" - help - This option selects the classic RCU implementation that is - designed for best read-side performance on non-realtime - systems. - - Select this option if you are unsure. - -config TREE_RCU - bool "Tree-based hierarchical RCU" - help - This option selects the RCU implementation that is - designed for very large SMP system with hundreds or - thousands of CPUs. - -config PREEMPT_RCU - bool "Preemptible RCU" - depends on PREEMPT - help - This option reduces the latency of the kernel by making certain - RCU sections preemptible. Normally RCU code is non-preemptible, if - this option is selected then read-only RCU sections become - preemptible. This helps latency, but may expose bugs due to - now-naive assumptions about each RCU read-side critical section - remaining on a given CPU through its execution. - -endchoice - -config RCU_TRACE - bool "Enable tracing for RCU" - depends on TREE_RCU || PREEMPT_RCU - help - This option provides tracing in RCU which presents stats - in debugfs for debugging RCU implementation. - - Say Y here if you want to enable RCU tracing - Say N if you are unsure. - -config RCU_FANOUT - int "Tree-based hierarchical RCU fanout value" - range 2 64 if 64BIT - range 2 32 if !64BIT - depends on TREE_RCU - default 64 if 64BIT - default 32 if !64BIT - help - This option controls the fanout of hierarchical implementations - of RCU, allowing RCU to work efficiently on machines with - large numbers of CPUs. This value must be at least the cube - root of NR_CPUS, which allows NR_CPUS up to 32,768 for 32-bit - systems and up to 262,144 for 64-bit systems. - - Select a specific number if testing RCU itself. - Take the default if unsure. - -config RCU_FANOUT_EXACT - bool "Disable tree-based hierarchical RCU auto-balancing" - depends on TREE_RCU - default n - help - This option forces use of the exact RCU_FANOUT value specified, - regardless of imbalances in the hierarchy. This is useful for - testing RCU itself, and might one day be useful on systems with - strong NUMA behavior. - - Without RCU_FANOUT_EXACT, the code will balance the hierarchy. - - Say N if unsure. - -config TREE_RCU_TRACE - def_bool RCU_TRACE && TREE_RCU - select DEBUG_FS - help - This option provides tracing for the TREE_RCU implementation, - permitting Makefile to trivially select kernel/rcutree_trace.c. - -config PREEMPT_RCU_TRACE - def_bool RCU_TRACE && PREEMPT_RCU - select DEBUG_FS - help - This option provides tracing for the PREEMPT_RCU implementation, - permitting Makefile to trivially select kernel/rcupreempt_trace.c. diff --git a/init/do_mounts_rd.c b/init/do_mounts_rd.c index a7c748fa977..0f0f0cf3ba9 100644 --- a/init/do_mounts_rd.c +++ b/init/do_mounts_rd.c @@ -9,6 +9,7 @@ #include <linux/string.h> #include "do_mounts.h" +#include "../fs/squashfs/squashfs_fs.h" int __initdata rd_prompt = 1;/* 1 = prompt for RAM disk, 0 = don't prompt */ @@ -41,6 +42,7 @@ static int __init crd_load(int in_fd, int out_fd); * ext2 * romfs * cramfs + * squashfs * gzip */ static int __init @@ -51,6 +53,7 @@ identify_ramdisk_image(int fd, int start_block) struct ext2_super_block *ext2sb; struct romfs_super_block *romfsb; struct cramfs_super *cramfsb; + struct squashfs_super_block *squashfsb; int nblocks = -1; unsigned char *buf; @@ -62,6 +65,7 @@ identify_ramdisk_image(int fd, int start_block) ext2sb = (struct ext2_super_block *) buf; romfsb = (struct romfs_super_block *) buf; cramfsb = (struct cramfs_super *) buf; + squashfsb = (struct squashfs_super_block *) buf; memset(buf, 0xe5, size); /* @@ -99,6 +103,16 @@ identify_ramdisk_image(int fd, int start_block) goto done; } + /* squashfs is at block zero too */ + if (le32_to_cpu(squashfsb->s_magic) == SQUASHFS_MAGIC) { + printk(KERN_NOTICE + "RAMDISK: squashfs filesystem found at block %d\n", + start_block); + nblocks = (le64_to_cpu(squashfsb->bytes_used) + BLOCK_SIZE - 1) + >> BLOCK_SIZE_BITS; + goto done; + } + /* * Read block 1 to test for minix and ext2 superblock */ diff --git a/init/initramfs.c b/init/initramfs.c index 4f5ba75aaa7..d9c941c0c3c 100644 --- a/init/initramfs.c +++ b/init/initramfs.c @@ -317,6 +317,7 @@ static int __init do_name(void) if (wfd >= 0) { sys_fchown(wfd, uid, gid); sys_fchmod(wfd, mode); + sys_ftruncate(wfd, body_len); vcollected = kstrdup(collected, GFP_KERNEL); state = CopyFile; } |