diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/device.h | 34 | ||||
| -rw-r--r-- | include/linux/dynamic_debug.h | 22 | ||||
| -rw-r--r-- | include/linux/extcon.h | 324 | ||||
| -rw-r--r-- | include/linux/extcon/extcon_gpio.h | 52 | ||||
| -rw-r--r-- | include/linux/hyperv.h | 4 | ||||
| -rw-r--r-- | include/linux/mfd/max8997.h | 23 | ||||
| -rw-r--r-- | include/linux/moduleparam.h | 3 | ||||
| -rw-r--r-- | include/linux/platform_data/emif_plat.h | 128 | ||||
| -rw-r--r-- | include/linux/printk.h | 13 | ||||
| -rw-r--r-- | include/linux/sysfs.h | 12 | ||||
| -rw-r--r-- | include/memory/jedec_ddr.h | 175 |
11 files changed, 762 insertions, 28 deletions
diff --git a/include/linux/device.h b/include/linux/device.h index 5ad17cccdd7..e04f5776f6d 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -23,6 +23,7 @@ #include <linux/mutex.h> #include <linux/pm.h> #include <linux/atomic.h> +#include <linux/ratelimit.h> #include <asm/device.h> struct device; @@ -502,7 +503,10 @@ ssize_t device_store_int(struct device *dev, struct device_attribute *attr, { __ATTR(_name, _mode, device_show_ulong, device_store_ulong), &(_var) } #define DEVICE_INT_ATTR(_name, _mode, _var) \ struct dev_ext_attribute dev_attr_##_name = \ - { __ATTR(_name, _mode, device_show_ulong, device_store_ulong), &(_var) } + { __ATTR(_name, _mode, device_show_int, device_store_int), &(_var) } +#define DEVICE_ATTR_IGNORE_LOCKDEP(_name, _mode, _show, _store) \ + struct device_attribute dev_attr_##_name = \ + __ATTR_IGNORE_LOCKDEP(_name, _mode, _show, _store) extern int device_create_file(struct device *device, const struct device_attribute *entry); @@ -541,6 +545,8 @@ extern void *devres_remove(struct device *dev, dr_release_t release, dr_match_t match, void *match_data); extern int devres_destroy(struct device *dev, dr_release_t release, dr_match_t match, void *match_data); +extern int devres_release(struct device *dev, dr_release_t release, + dr_match_t match, void *match_data); /* devres group */ extern void * __must_check devres_open_group(struct device *dev, void *id, @@ -931,6 +937,32 @@ int _dev_info(const struct device *dev, const char *fmt, ...) #endif +#define dev_level_ratelimited(dev_level, dev, fmt, ...) \ +do { \ + static DEFINE_RATELIMIT_STATE(_rs, \ + DEFAULT_RATELIMIT_INTERVAL, \ + DEFAULT_RATELIMIT_BURST); \ + if (__ratelimit(&_rs)) \ + dev_level(dev, fmt, ##__VA_ARGS__); \ +} while (0) + +#define dev_emerg_ratelimited(dev, fmt, ...) \ + dev_level_ratelimited(dev_emerg, dev, fmt, ##__VA_ARGS__) +#define dev_alert_ratelimited(dev, fmt, ...) \ + dev_level_ratelimited(dev_alert, dev, fmt, ##__VA_ARGS__) +#define dev_crit_ratelimited(dev, fmt, ...) \ + dev_level_ratelimited(dev_crit, dev, fmt, ##__VA_ARGS__) +#define dev_err_ratelimited(dev, fmt, ...) \ + dev_level_ratelimited(dev_err, dev, fmt, ##__VA_ARGS__) +#define dev_warn_ratelimited(dev, fmt, ...) \ + dev_level_ratelimited(dev_warn, dev, fmt, ##__VA_ARGS__) +#define dev_notice_ratelimited(dev, fmt, ...) \ + dev_level_ratelimited(dev_notice, dev, fmt, ##__VA_ARGS__) +#define dev_info_ratelimited(dev, fmt, ...) \ + dev_level_ratelimited(dev_info, dev, fmt, ##__VA_ARGS__) +#define dev_dbg_ratelimited(dev, fmt, ...) \ + dev_level_ratelimited(dev_dbg, dev, fmt, ##__VA_ARGS__) + /* * Stupid hackaround for existing uses of non-printk uses dev_info * diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h index 7e3c53a900d..c18257b0fa7 100644 --- a/include/linux/dynamic_debug.h +++ b/include/linux/dynamic_debug.h @@ -17,8 +17,8 @@ struct _ddebug { const char *format; unsigned int lineno:18; /* - * The flags field controls the behaviour at the callsite. - * The bits here are changed dynamically when the user + * The flags field controls the behaviour at the callsite. + * The bits here are changed dynamically when the user * writes commands to <debugfs>/dynamic_debug/control */ #define _DPRINTK_FLAGS_NONE 0 @@ -44,6 +44,9 @@ extern int ddebug_remove_module(const char *mod_name); extern __printf(2, 3) int __dynamic_pr_debug(struct _ddebug *descriptor, const char *fmt, ...); +extern int ddebug_dyndbg_module_param_cb(char *param, char *val, + const char *modname); + struct device; extern __printf(3, 4) @@ -94,11 +97,26 @@ do { \ #else +#include <linux/string.h> +#include <linux/errno.h> + static inline int ddebug_remove_module(const char *mod) { return 0; } +static inline int ddebug_dyndbg_module_param_cb(char *param, char *val, + const char *modname) +{ + if (strstr(param, "dyndbg")) { + /* avoid pr_warn(), which wants pr_fmt() fully defined */ + printk(KERN_WARNING "dyndbg param is supported only in " + "CONFIG_DYNAMIC_DEBUG builds\n"); + return 0; /* allow and ignore */ + } + return -EINVAL; +} + #define dynamic_pr_debug(fmt, ...) \ do { if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); } while (0) #define dynamic_dev_dbg(dev, fmt, ...) \ diff --git a/include/linux/extcon.h b/include/linux/extcon.h new file mode 100644 index 00000000000..cdd40147765 --- /dev/null +++ b/include/linux/extcon.h @@ -0,0 +1,324 @@ +/* + * External connector (extcon) class driver + * + * Copyright (C) 2012 Samsung Electronics + * Author: Donggeun Kim <dg77.kim@samsung.com> + * Author: MyungJoo Ham <myungjoo.ham@samsung.com> + * + * based on switch class driver + * Copyright (C) 2008 Google, Inc. + * Author: Mike Lockwood <lockwood@android.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * +*/ + +#ifndef __LINUX_EXTCON_H__ +#define __LINUX_EXTCON_H__ + +#include <linux/notifier.h> + +#define SUPPORTED_CABLE_MAX 32 +#define CABLE_NAME_MAX 30 + +/* + * The standard cable name is to help support general notifier + * and notifee device drivers to share the common names. + * Please use standard cable names unless your notifier device has + * a very unique and abnormal cable or + * the cable type is supposed to be used with only one unique + * pair of notifier/notifee devices. + * + * Please add any other "standard" cables used with extcon dev. + * + * You may add a dot and number to specify version or specification + * of the specific cable if it is required. (e.g., "Fast-charger.18" + * and "Fast-charger.10" for 1.8A and 1.0A chargers) + * However, the notifee and notifier should be able to handle such + * string and if the notifee can negotiate the protocol or idenify, + * you don't need such convention. This convention is helpful when + * notifier can distinguish but notifiee cannot. + */ +enum extcon_cable_name { + EXTCON_USB = 0, + EXTCON_USB_HOST, + EXTCON_TA, /* Travel Adaptor */ + EXTCON_FAST_CHARGER, + EXTCON_SLOW_CHARGER, + EXTCON_CHARGE_DOWNSTREAM, /* Charging an external device */ + EXTCON_HDMI, + EXTCON_MHL, + EXTCON_DVI, + EXTCON_VGA, + EXTCON_DOCK, + EXTCON_LINE_IN, + EXTCON_LINE_OUT, + EXTCON_MIC_IN, + EXTCON_HEADPHONE_OUT, + EXTCON_SPDIF_IN, + EXTCON_SPDIF_OUT, + EXTCON_VIDEO_IN, + EXTCON_VIDEO_OUT, + EXTCON_MECHANICAL, +}; +extern const char *extcon_cable_name[]; + +struct extcon_cable; + +/** + * struct extcon_dev - An extcon device represents one external connector. + * @name The name of this extcon device. Parent device name is used + * if NULL. + * @supported_cable Array of supported cable name ending with NULL. + * If supported_cable is NULL, cable name related APIs + * are disabled. + * @mutually_exclusive Array of mutually exclusive set of cables that cannot + * be attached simultaneously. The array should be + * ending with NULL or be NULL (no mutually exclusive + * cables). For example, if it is { 0x7, 0x30, 0}, then, + * {0, 1}, {0, 1, 2}, {0, 2}, {1, 2}, or {4, 5} cannot + * be attached simulataneously. {0x7, 0} is equivalent to + * {0x3, 0x6, 0x5, 0}. If it is {0xFFFFFFFF, 0}, there + * can be no simultaneous connections. + * @print_name An optional callback to override the method to print the + * name of the extcon device. + * @print_state An optional callback to override the method to print the + * status of the extcon device. + * @dev Device of this extcon. Do not provide at register-time. + * @state Attach/detach state of this extcon. Do not provide at + * register-time + * @nh Notifier for the state change events from this extcon + * @entry To support list of extcon devices so that uses can search + * for extcon devices based on the extcon name. + * @lock + * @max_supported Internal value to store the number of cables. + * @extcon_dev_type Device_type struct to provide attribute_groups + * customized for each extcon device. + * @cables Sysfs subdirectories. Each represents one cable. + * + * In most cases, users only need to provide "User initializing data" of + * this struct when registering an extcon. In some exceptional cases, + * optional callbacks may be needed. However, the values in "internal data" + * are overwritten by register function. + */ +struct extcon_dev { + /* --- Optional user initializing data --- */ + const char *name; + const char **supported_cable; + const u32 *mutually_exclusive; + + /* --- Optional callbacks to override class functions --- */ + ssize_t (*print_name)(struct extcon_dev *edev, char *buf); + ssize_t (*print_state)(struct extcon_dev *edev, char *buf); + + /* --- Internal data. Please do not set. --- */ + struct device *dev; + u32 state; + struct raw_notifier_head nh; + struct list_head entry; + spinlock_t lock; /* could be called by irq handler */ + int max_supported; + + /* /sys/class/extcon/.../cable.n/... */ + struct device_type extcon_dev_type; + struct extcon_cable *cables; + /* /sys/class/extcon/.../mutually_exclusive/... */ + struct attribute_group attr_g_muex; + struct attribute **attrs_muex; + struct device_attribute *d_attrs_muex; +}; + +/** + * struct extcon_cable - An internal data for each cable of extcon device. + * @edev The extcon device + * @cable_index Index of this cable in the edev + * @attr_g Attribute group for the cable + * @attr_name "name" sysfs entry + * @attr_state "state" sysfs entry + * @attrs Array pointing to attr_name and attr_state for attr_g + */ +struct extcon_cable { + struct extcon_dev *edev; + int cable_index; + + struct attribute_group attr_g; + struct device_attribute attr_name; + struct device_attribute attr_state; + + struct attribute *attrs[3]; /* to be fed to attr_g.attrs */ +}; + +/** + * struct extcon_specific_cable_nb - An internal data for + * extcon_register_interest(). + * @internal_nb a notifier block bridging extcon notifier and cable notifier. + * @user_nb user provided notifier block for events from a specific cable. + * @cable_index the target cable. + * @edev the target extcon device. + * @previous_value the saved previous event value. + */ +struct extcon_specific_cable_nb { + struct notifier_block internal_nb; + struct notifier_block *user_nb; + int cable_index; + struct extcon_dev *edev; + unsigned long previous_value; +}; + +#if IS_ENABLED(CONFIG_EXTCON) + +/* + * Following APIs are for notifiers or configurations. + * Notifiers are the external port and connection devices. + */ +extern int extcon_dev_register(struct extcon_dev *edev, struct device *dev); +extern void extcon_dev_unregister(struct extcon_dev *edev); +extern struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name); + +/* + * get/set/update_state access the 32b encoded state value, which represents + * states of all possible cables of the multistate port. For example, if one + * calls extcon_set_state(edev, 0x7), it may mean that all the three cables + * are attached to the port. + */ +static inline u32 extcon_get_state(struct extcon_dev *edev) +{ + return edev->state; +} + +extern int extcon_set_state(struct extcon_dev *edev, u32 state); +extern int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state); + +/* + * get/set_cable_state access each bit of the 32b encoded state value. + * They are used to access the status of each cable based on the cable_name + * or cable_index, which is retrived by extcon_find_cable_index + */ +extern int extcon_find_cable_index(struct extcon_dev *sdev, + const char *cable_name); +extern int extcon_get_cable_state_(struct extcon_dev *edev, int cable_index); +extern int extcon_set_cable_state_(struct extcon_dev *edev, int cable_index, + bool cable_state); + +extern int extcon_get_cable_state(struct extcon_dev *edev, + const char *cable_name); +extern int extcon_set_cable_state(struct extcon_dev *edev, + const char *cable_name, bool cable_state); + +/* + * Following APIs are for notifiees (those who want to be notified) + * to register a callback for events from a specific cable of the extcon. + * Notifiees are the connected device drivers wanting to get notified by + * a specific external port of a connection device. + */ +extern int extcon_register_interest(struct extcon_specific_cable_nb *obj, + const char *extcon_name, + const char *cable_name, + struct notifier_block *nb); +extern int extcon_unregister_interest(struct extcon_specific_cable_nb *nb); + +/* + * Following APIs are to monitor every action of a notifier. + * Registerer gets notified for every external port of a connection device. + * Probably this could be used to debug an action of notifier; however, + * we do not recommend to use this at normal 'notifiee' device drivers who + * want to be notified by a specific external port of the notifier. + */ +extern int extcon_register_notifier(struct extcon_dev *edev, + struct notifier_block *nb); +extern int extcon_unregister_notifier(struct extcon_dev *edev, + struct notifier_block *nb); +#else /* CONFIG_EXTCON */ +static inline int extcon_dev_register(struct extcon_dev *edev, + struct device *dev) +{ + return 0; +} + +static inline void extcon_dev_unregister(struct extcon_dev *edev) { } + +static inline u32 extcon_get_state(struct extcon_dev *edev) +{ + return 0; +} + +static inline int extcon_set_state(struct extcon_dev *edev, u32 state) +{ + return 0; +} + +static inline int extcon_update_state(struct extcon_dev *edev, u32 mask, + u32 state) +{ + return 0; +} + +static inline int extcon_find_cable_index(struct extcon_dev *edev, + const char *cable_name) +{ + return 0; +} + +static inline int extcon_get_cable_state_(struct extcon_dev *edev, + int cable_index) +{ + return 0; +} + +static inline int extcon_set_cable_state_(struct extcon_dev *edev, + int cable_index, bool cable_state) +{ + return 0; +} + +static inline int extcon_get_cable_state(struct extcon_dev *edev, + const char *cable_name) +{ + return 0; +} + +static inline int extcon_set_cable_state(struct extcon_dev *edev, + const char *cable_name, int state) +{ + return 0; +} + +static inline struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name) +{ + return NULL; +} + +static inline int extcon_register_notifier(struct extcon_dev *edev, + struct notifier_block *nb) +{ + return 0; +} + +static inline int extcon_unregister_notifier(struct extcon_dev *edev, + struct notifier_block *nb) +{ + return 0; +} + +static inline int extcon_register_interest(struct extcon_specific_cable_nb *obj, + const char *extcon_name, + const char *cable_name, + struct notifier_block *nb) +{ + return 0; +} + +static inline int extcon_unregister_interest(struct extcon_specific_cable_nb + *obj) +{ + return 0; +} +#endif /* CONFIG_EXTCON */ +#endif /* __LINUX_EXTCON_H__ */ diff --git a/include/linux/extcon/extcon_gpio.h b/include/linux/extcon/extcon_gpio.h new file mode 100644 index 00000000000..a2129b73dcb --- /dev/null +++ b/include/linux/extcon/extcon_gpio.h @@ -0,0 +1,52 @@ +/* + * External connector (extcon) class generic GPIO driver + * + * Copyright (C) 2012 Samsung Electronics + * Author: MyungJoo Ham <myungjoo.ham@samsung.com> + * + * based on switch class driver + * Copyright (C) 2008 Google, Inc. + * Author: Mike Lockwood <lockwood@android.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * +*/ +#ifndef __EXTCON_GPIO_H__ +#define __EXTCON_GPIO_H__ __FILE__ + +#include <linux/extcon.h> + +/** + * struct gpio_extcon_platform_data - A simple GPIO-controlled extcon device. + * @name The name of this GPIO extcon device. + * @gpio Corresponding GPIO. + * @debounce Debounce time for GPIO IRQ in ms. + * @irq_flags IRQ Flags (e.g., IRQF_TRIGGER_LOW). + * @state_on print_state is overriden with state_on if attached. If Null, + * default method of extcon class is used. + * @state_off print_state is overriden with state_on if dettached. If Null, + * default method of extcon class is used. + * + * Note that in order for state_on or state_off to be valid, both state_on + * and state_off should be not NULL. If at least one of them is NULL, + * the print_state is not overriden. + */ +struct gpio_extcon_platform_data { + const char *name; + unsigned gpio; + unsigned long debounce; + unsigned long irq_flags; + + /* if NULL, "0" or "1" will be printed */ + const char *state_on; + const char *state_off; +}; + +#endif /* __EXTCON_GPIO_H__ */ diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index 6af8738ae7e..68ed7f7e1fc 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -1062,8 +1062,10 @@ struct hyperv_service_callback { void (*callback) (void *context); }; +#define MAX_SRV_VER 0x7ffffff extern void vmbus_prep_negotiate_resp(struct icmsg_hdr *, - struct icmsg_negotiate *, u8 *); + struct icmsg_negotiate *, u8 *, int, + int); int hv_kvp_init(struct hv_util_service *); void hv_kvp_deinit(void); diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h index 28726dd540f..b40c08cd30b 100644 --- a/include/linux/mfd/max8997.h +++ b/include/linux/mfd/max8997.h @@ -99,34 +99,11 @@ struct max8997_muic_reg_data { /** * struct max8997_muic_platform_data - * @usb_callback: callback function for USB - * inform callee of USB type (HOST or DEVICE) - * and attached state(true or false) - * @charger_callback: callback function for charger - * inform callee of charger_type - * and attached state(true or false) - * @deskdock_callback: callback function for desk dock - * inform callee of attached state(true or false) - * @cardock_callback: callback function for car dock - * inform callee of attached state(true or false) - * @mhl_callback: callback function for MHL (Mobile High-definition Link) - * inform callee of attached state(true or false) - * @uart_callback: callback function for JIG UART - * inform callee of attached state(true or false) * @init_data: array of max8997_muic_reg_data * used for initializing registers of MAX8997 MUIC device * @num_init_data: array size of init_data */ struct max8997_muic_platform_data { - void (*usb_callback)(enum max8997_muic_usb_type usb_type, - bool attached); - void (*charger_callback)(bool attached, - enum max8997_muic_charger_type charger_type); - void (*deskdock_callback) (bool attached); - void (*cardock_callback) (bool attached); - void (*mhl_callback) (bool attached); - void (*uart_callback) (bool attached); - struct max8997_muic_reg_data *init_data; int num_init_data; }; diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h index ea36486378d..1b14d25162c 100644 --- a/include/linux/moduleparam.h +++ b/include/linux/moduleparam.h @@ -320,7 +320,8 @@ extern int parse_args(const char *name, unsigned num, s16 level_min, s16 level_max, - int (*unknown)(char *param, char *val)); + int (*unknown)(char *param, char *val, + const char *doing)); /* Called by module remove. */ #ifdef CONFIG_SYSFS diff --git a/include/linux/platform_data/emif_plat.h b/include/linux/platform_data/emif_plat.h new file mode 100644 index 00000000000..03378ca8406 --- /dev/null +++ b/include/linux/platform_data/emif_plat.h @@ -0,0 +1,128 @@ +/* + * Definitions for TI EMIF device platform data + * + * Copyright (C) 2012 Texas Instruments, Inc. + * + * Aneesh V <aneesh@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __EMIF_PLAT_H +#define __EMIF_PLAT_H + +/* Low power modes - EMIF_PWR_MGMT_CTRL */ +#define EMIF_LP_MODE_DISABLE 0 +#define EMIF_LP_MODE_CLOCK_STOP 1 +#define EMIF_LP_MODE_SELF_REFRESH 2 +#define EMIF_LP_MODE_PWR_DN 4 + +/* Hardware capabilities */ +#define EMIF_HW_CAPS_LL_INTERFACE 0x00000001 + +/* + * EMIF IP Revisions + * EMIF4D - Used in OMAP4 + * EMIF4D5 - Used in OMAP5 + */ +#define EMIF_4D 1 +#define EMIF_4D5 2 + +/* + * PHY types + * ATTILAPHY - Used in OMAP4 + * INTELLIPHY - Used in OMAP5 + */ +#define EMIF_PHY_TYPE_ATTILAPHY 1 +#define EMIF_PHY_TYPE_INTELLIPHY 2 + +/* Custom config requests */ +#define EMIF_CUSTOM_CONFIG_LPMODE 0x00000001 +#define EMIF_CUSTOM_CONFIG_TEMP_ALERT_POLL_INTERVAL 0x00000002 + +#ifndef __ASSEMBLY__ +/** + * struct ddr_device_info - All information about the DDR device except AC + * timing parameters + * @type: Device type (LPDDR2-S4, LPDDR2-S2 etc) + * @density: Device density + * @io_width: Bus width + * @cs1_used: Whether there is a DDR device attached to the second + * chip-select(CS1) of this EMIF instance + * @cal_resistors_per_cs: Whether there is one calibration resistor per + * chip-select or whether it's a single one for both + * @manufacturer: Manufacturer name string + */ +struct ddr_device_info { + u32 type; + u32 density; + u32 io_width; + u32 cs1_used; + u32 cal_resistors_per_cs; + char manufacturer[10]; +}; + +/** + * struct emif_custom_configs - Custom configuration parameters/policies + * passed from the platform layer + * @mask: Mask to indicate which configs are requested + * @lpmode: LPMODE to be used in PWR_MGMT_CTRL register + * @lpmode_timeout_performance: Timeout before LPMODE entry when higher + * performance is desired at the cost of power (typically + * at higher OPPs) + * @lpmode_timeout_power: Timeout before LPMODE entry when better power + * savings is desired and performance is not important + * (typically at lower loads indicated by lower OPPs) + * @lpmode_freq_threshold: The DDR frequency threshold to identify between + * the above two cases: + * timeout = (freq >= lpmode_freq_threshold) ? + * lpmode_timeout_performance : + * lpmode_timeout_power; + * @temp_alert_poll_interval_ms: LPDDR2 MR4 polling interval at nominal + * temperature(in milliseconds). When temperature is high + * polling is done 4 times as frequently. + */ +struct emif_custom_configs { + u32 mask; + u32 lpmode; + u32 lpmode_timeout_performance; + u32 lpmode_timeout_power; + u32 lpmode_freq_threshold; + u32 temp_alert_poll_interval_ms; +}; + +/** + * struct emif_platform_data - Platform data passed on EMIF platform + * device creation. Used by the driver. + * @hw_caps: Hw capabilities of the EMIF IP in the respective SoC + * @device_info: Device info structure containing information such + * as type, bus width, density etc + * @timings: Timings information from device datasheet passed + * as an array of 'struct lpddr2_timings'. Can be NULL + * if if default timings are ok + * @timings_arr_size: Size of the timings array. Depends on the number + * of different frequencies for which timings data + * is provided + * @min_tck: Minimum value of some timing parameters in terms + * of number of cycles. Can be NULL if default values + * are ok + * @custom_configs: Custom configurations requested by SoC or board + * code and the data for them. Can be NULL if default + * configurations done by the driver are ok. See + * documentation for 'struct emif_custom_configs' for + * more details + */ +struct emif_platform_data { + u32 hw_caps; + struct ddr_device_info *device_info; + const struct lpddr2_timings *timings; + u32 timings_arr_size; + const struct lpddr2_min_tck *min_tck; + struct emif_custom_configs *custom_configs; + u32 ip_rev; + u32 phy_type; +}; +#endif /* __ASSEMBLY__ */ + +#endif /* __LINUX_EMIF_H */ diff --git a/include/linux/printk.h b/include/linux/printk.h index 0525927f203..1bec2f7a2d4 100644 --- a/include/linux/printk.h +++ b/include/linux/printk.h @@ -95,8 +95,19 @@ extern int printk_needs_cpu(int cpu); extern void printk_tick(void); #ifdef CONFIG_PRINTK +asmlinkage __printf(5, 0) +int vprintk_emit(int facility, int level, + const char *dict, size_t dictlen, + const char *fmt, va_list args); + asmlinkage __printf(1, 0) int vprintk(const char *fmt, va_list args); + +asmlinkage __printf(5, 6) __cold +asmlinkage int printk_emit(int facility, int level, + const char *dict, size_t dictlen, + const char *fmt, ...); + asmlinkage __printf(1, 2) __cold int printk(const char *fmt, ...); @@ -289,6 +300,8 @@ extern void dump_stack(void) __cold; no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) #endif +extern const struct file_operations kmsg_fops; + enum { DUMP_PREFIX_NONE, DUMP_PREFIX_ADDRESS, diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h index 0010009b2f0..381f06db2fe 100644 --- a/include/linux/sysfs.h +++ b/include/linux/sysfs.h @@ -27,6 +27,7 @@ struct attribute { const char *name; umode_t mode; #ifdef CONFIG_DEBUG_LOCK_ALLOC + bool ignore_lockdep:1; struct lock_class_key *key; struct lock_class_key skey; #endif @@ -80,6 +81,17 @@ struct attribute_group { #define __ATTR_NULL { .attr = { .name = NULL } } +#ifdef CONFIG_DEBUG_LOCK_ALLOC +#define __ATTR_IGNORE_LOCKDEP(_name, _mode, _show, _store) { \ + .attr = {.name = __stringify(_name), .mode = _mode, \ + .ignore_lockdep = true }, \ + .show = _show, \ + .store = _store, \ +} +#else +#define __ATTR_IGNORE_LOCKDEP __ATTR +#endif + #define attr_name(_attr) (_attr).attr.name struct file; diff --git a/include/memory/jedec_ddr.h b/include/memory/jedec_ddr.h new file mode 100644 index 00000000000..ddad0f870e5 --- /dev/null +++ b/include/memory/jedec_ddr.h @@ -0,0 +1,175 @@ +/* + * Definitions for DDR memories based on JEDEC specs + * + * Copyright (C) 2012 Texas Instruments, Inc. + * + * Aneesh V <aneesh@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __LINUX_JEDEC_DDR_H +#define __LINUX_JEDEC_DDR_H + +#include <linux/types.h> + +/* DDR Densities */ +#define DDR_DENSITY_64Mb 1 +#define DDR_DENSITY_128Mb 2 +#define DDR_DENSITY_256Mb 3 +#define DDR_DENSITY_512Mb 4 +#define DDR_DENSITY_1Gb 5 +#define DDR_DENSITY_2Gb 6 +#define DDR_DENSITY_4Gb 7 +#define DDR_DENSITY_8Gb 8 +#define DDR_DENSITY_16Gb 9 +#define DDR_DENSITY_32Gb 10 + +/* DDR type */ +#define DDR_TYPE_DDR2 1 +#define DDR_TYPE_DDR3 2 +#define DDR_TYPE_LPDDR2_S4 3 +#define DDR_TYPE_LPDDR2_S2 4 +#define DDR_TYPE_LPDDR2_NVM 5 + +/* DDR IO width */ +#define DDR_IO_WIDTH_4 1 +#define DDR_IO_WIDTH_8 2 +#define DDR_IO_WIDTH_16 3 +#define DDR_IO_WIDTH_32 4 + +/* Number of Row bits */ +#define R9 9 +#define R10 10 +#define R11 11 +#define R12 12 +#define R13 13 +#define R14 14 +#define R15 15 +#define R16 16 + +/* Number of Column bits */ +#define C7 7 +#define C8 8 +#define C9 9 +#define C10 10 +#define C11 11 +#define C12 12 + +/* Number of Banks */ +#define B1 0 +#define B2 1 +#define B4 2 +#define B8 3 + +/* Refresh rate in nano-seconds */ +#define T_REFI_15_6 15600 +#define T_REFI_7_8 7800 +#define T_REFI_3_9 3900 + +/* tRFC values */ +#define T_RFC_90 90000 +#define T_RFC_110 110000 +#define T_RFC_130 130000 +#define T_RFC_160 160000 +#define T_RFC_210 210000 +#define T_RFC_300 300000 +#define T_RFC_350 350000 + +/* Mode register numbers */ +#define DDR_MR0 0 +#define DDR_MR1 1 +#define DDR_MR2 2 +#define DDR_MR3 3 +#define DDR_MR4 4 +#define DDR_MR5 5 +#define DDR_MR6 6 +#define DDR_MR7 7 +#define DDR_MR8 8 +#define DDR_MR9 9 +#define DDR_MR10 10 +#define DDR_MR11 11 +#define DDR_MR16 16 +#define DDR_MR17 17 +#define DDR_MR18 18 + +/* + * LPDDR2 related defines + */ + +/* MR4 register fields */ +#define MR4_SDRAM_REF_RATE_SHIFT 0 +#define MR4_SDRAM_REF_RATE_MASK 7 +#define MR4_TUF_SHIFT 7 +#define MR4_TUF_MASK (1 << 7) + +/* MR4 SDRAM Refresh Rate field values */ +#define SDRAM_TEMP_NOMINAL 0x3 +#define SDRAM_TEMP_RESERVED_4 0x4 +#define SDRAM_TEMP_HIGH_DERATE_REFRESH 0x5 +#define SDRAM_TEMP_HIGH_DERATE_REFRESH_AND_TIMINGS 0x6 +#define SDRAM_TEMP_VERY_HIGH_SHUTDOWN 0x7 + +#define NUM_DDR_ADDR_TABLE_ENTRIES 11 +#define NUM_DDR_TIMING_TABLE_ENTRIES 4 + +/* Structure for DDR addressing info from the JEDEC spec */ +struct lpddr2_addressing { + u32 num_banks; + u32 tREFI_ns; + u32 tRFCab_ps; +}; + +/* + * Structure for timings from the LPDDR2 datasheet + * All parameters are in pico seconds(ps) unless explicitly indicated + * with a suffix like tRAS_max_ns below + */ +struct lpddr2_timings { + u32 max_freq; + u32 min_freq; + u32 tRPab; + u32 tRCD; + u32 tWR; + u32 tRAS_min; + u32 tRRD; + u32 tWTR; + u32 tXP; + u32 tRTP; + u32 tCKESR; + u32 tDQSCK_max; + u32 tDQSCK_max_derated; + u32 tFAW; + u32 tZQCS; + u32 tZQCL; + u32 tZQinit; + u32 tRAS_max_ns; +}; + +/* + * Min value for some parameters in terms of number of tCK cycles(nCK) + * Please set to zero parameters that are not valid for a given memory + * type + */ +struct lpddr2_min_tck { + u32 tRPab; + u32 tRCD; + u32 tWR; + u32 tRASmin; + u32 tRRD; + u32 tWTR; + u32 tXP; + u32 tRTP; + u32 tCKE; + u32 tCKESR; + u32 tFAW; +}; + +extern const struct lpddr2_addressing + lpddr2_jedec_addressing_table[NUM_DDR_ADDR_TABLE_ENTRIES]; +extern const struct lpddr2_timings + lpddr2_jedec_timings[NUM_DDR_TIMING_TABLE_ENTRIES]; +extern const struct lpddr2_min_tck lpddr2_jedec_min_tck; + +#endif /* __LINUX_JEDEC_DDR_H */ |