diff options
Diffstat (limited to 'include/video')
46 files changed, 4915 insertions, 1610 deletions
diff --git a/include/video/Kbuild b/include/video/Kbuild index 0e406f730c2..e69de29bb2d 100644 --- a/include/video/Kbuild +++ b/include/video/Kbuild @@ -1,2 +0,0 @@ -unifdef-y += sisfb.h uvesafb.h -unifdef-y += edid.h diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h index 336c20db87f..c79f3813192 100644 --- a/include/video/atmel_lcdc.h +++ b/include/video/atmel_lcdc.h @@ -22,30 +22,29 @@ #ifndef __ATMEL_LCDC_H__ #define __ATMEL_LCDC_H__ - /* LCD Controller info data structure, stored in device platform_data */ -struct atmel_lcdfb_info { - spinlock_t lock; - struct fb_info *info; - void __iomem *mmio; - unsigned long irq_base; +#include <linux/workqueue.h> + +/* Way LCD wires are connected to the chip: + * Some Atmel chips use BGR color mode (instead of standard RGB) + * A swapped wiring onboard can bring to RGB mode. + */ +#define ATMEL_LCDC_WIRING_BGR 0 +#define ATMEL_LCDC_WIRING_RGB 1 + + /* LCD Controller info data structure, stored in device platform_data */ +struct atmel_lcdfb_pdata { unsigned int guard_time; - struct platform_device *pdev; - struct clk *bus_clk; - struct clk *lcdc_clk; - -#ifdef CONFIG_BACKLIGHT_ATMEL_LCDC - struct backlight_device *backlight; - u8 bl_power; -#endif bool lcdcon_is_backlight; - + bool lcdcon_pol_negative; u8 default_bpp; + u8 lcd_wiring_mode; unsigned int default_lcdcon2; unsigned int default_dmacon; - void (*atmel_lcdfb_power_control)(int on); + void (*atmel_lcdfb_power_control)(struct atmel_lcdfb_pdata *pdata, int on); struct fb_monspecs *default_monspecs; - u32 pseudo_palette[16]; + + struct list_head pwr_gpios; }; #define ATMEL_LCDC_DMABADDR1 0x00 diff --git a/include/video/aty128.h b/include/video/aty128.h index 7079beb005e..f0851e3bb7c 100644 --- a/include/video/aty128.h +++ b/include/video/aty128.h @@ -21,9 +21,9 @@ #define I2C_CNTL_1 0x0094 #define PALETTE_INDEX 0x00b0 #define PALETTE_DATA 0x00b4 -#define CONFIG_CNTL 0x00e0 +#define CNFG_CNTL 0x00e0 #define GEN_RESET_CNTL 0x00f0 -#define CONFIG_MEMSIZE 0x00f8 +#define CNFG_MEMSIZE 0x00f8 #define MEM_CNTL 0x0140 #define MEM_POWER_MISC 0x015c #define AGP_BASE 0x0170 @@ -415,7 +415,7 @@ #define PWR_MGT_SLOWDOWN_MCLK 0x00002000 #define PMI_PMSCR_REG 0x60 - + /* used by ATI bug fix for hardware ROM */ #define RAGE128_MPP_TB_CONFIG 0x01c0 diff --git a/include/video/auo_k190xfb.h b/include/video/auo_k190xfb.h new file mode 100644 index 00000000000..ac329ee1d75 --- /dev/null +++ b/include/video/auo_k190xfb.h @@ -0,0 +1,107 @@ +/* + * Definitions for AUO-K190X framebuffer drivers + * + * Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _LINUX_VIDEO_AUO_K190XFB_H_ +#define _LINUX_VIDEO_AUO_K190XFB_H_ + +/* Controller standby command needs a param */ +#define AUOK190X_QUIRK_STANDBYPARAM (1 << 0) + +/* Controller standby is completely broken */ +#define AUOK190X_QUIRK_STANDBYBROKEN (1 << 1) + +/* + * Resolutions for the displays + */ +#define AUOK190X_RESOLUTION_800_600 0 +#define AUOK190X_RESOLUTION_1024_768 1 +#define AUOK190X_RESOLUTION_600_800 4 +#define AUOK190X_RESOLUTION_768_1024 5 + +/* + * struct used by auok190x. board specific stuff comes from *board + */ +struct auok190xfb_par { + struct fb_info *info; + struct auok190x_board *board; + + struct regulator *regulator; + + struct mutex io_lock; + struct delayed_work work; + wait_queue_head_t waitq; + int resolution; + int rotation; + int consecutive_threshold; + int update_cnt; + + /* panel and controller informations */ + int epd_type; + int panel_size_int; + int panel_size_float; + int panel_model; + int tcon_version; + int lut_version; + + /* individual controller callbacks */ + void (*update_partial)(struct auok190xfb_par *par, u16 y1, u16 y2); + void (*update_all)(struct auok190xfb_par *par); + bool (*need_refresh)(struct auok190xfb_par *par); + void (*init)(struct auok190xfb_par *par); + void (*recover)(struct auok190xfb_par *par); + + int update_mode; /* mode to use for updates */ + int last_mode; /* update mode last used */ + int flash; + + /* power management */ + int autosuspend_delay; + bool standby; + bool manual_standby; +}; + +/** + * Board specific platform-data + * @init: initialize the controller interface + * @cleanup: cleanup the controller interface + * @wait_for_rdy: wait until the controller is not busy anymore + * @set_ctl: change an interface control + * @set_hdb: write a value to the data register + * @get_hdb: read a value from the data register + * @setup_irq: method to setup the irq handling on the busy gpio + * @gpio_nsleep: sleep gpio + * @gpio_nrst: reset gpio + * @gpio_nbusy: busy gpio + * @resolution: one of the AUOK190X_RESOLUTION constants + * @rotation: rotation of the framebuffer + * @quirks: controller quirks to honor + * @fps: frames per second for defio + */ +struct auok190x_board { + int (*init)(struct auok190xfb_par *); + void (*cleanup)(struct auok190xfb_par *); + int (*wait_for_rdy)(struct auok190xfb_par *); + + void (*set_ctl)(struct auok190xfb_par *, unsigned char, u8); + void (*set_hdb)(struct auok190xfb_par *, u16); + u16 (*get_hdb)(struct auok190xfb_par *); + + int (*setup_irq)(struct fb_info *); + + int gpio_nsleep; + int gpio_nrst; + int gpio_nbusy; + + int resolution; + int quirks; + int fps; +}; + +#endif diff --git a/include/video/broadsheetfb.h b/include/video/broadsheetfb.h new file mode 100644 index 00000000000..548d28f4ec6 --- /dev/null +++ b/include/video/broadsheetfb.h @@ -0,0 +1,74 @@ +/* + * broadsheetfb.h - definitions for the broadsheet framebuffer driver + * + * Copyright (C) 2008 by Jaya Kumar + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + * + */ + +#ifndef _LINUX_BROADSHEETFB_H_ +#define _LINUX_BROADSHEETFB_H_ + +/* Broadsheet command defines */ +#define BS_CMD_INIT_SYS_RUN 0x06 +#define BS_CMD_INIT_DSPE_CFG 0x09 +#define BS_CMD_INIT_DSPE_TMG 0x0A +#define BS_CMD_INIT_ROTMODE 0x0B +#define BS_CMD_RD_REG 0x10 +#define BS_CMD_WR_REG 0x11 +#define BS_CMD_LD_IMG 0x20 +#define BS_CMD_LD_IMG_AREA 0x22 +#define BS_CMD_LD_IMG_END 0x23 +#define BS_CMD_WAIT_DSPE_TRG 0x28 +#define BS_CMD_WAIT_DSPE_FREND 0x29 +#define BS_CMD_RD_WFM_INFO 0x30 +#define BS_CMD_UPD_INIT 0x32 +#define BS_CMD_UPD_FULL 0x33 +#define BS_CMD_UPD_GDRV_CLR 0x37 + +/* Broadsheet register interface defines */ +#define BS_REG_REV 0x00 +#define BS_REG_PRC 0x02 + +/* Broadsheet pin interface specific defines */ +#define BS_CS 0x01 +#define BS_DC 0x02 +#define BS_WR 0x03 + +/* Broadsheet IO interface specific defines */ +#define BS_MMIO_CMD 0x01 +#define BS_MMIO_DATA 0x02 + +/* struct used by broadsheet. board specific stuff comes from *board */ +struct broadsheetfb_par { + struct fb_info *info; + struct broadsheet_board *board; + void (*write_reg)(struct broadsheetfb_par *, u16 reg, u16 val); + u16 (*read_reg)(struct broadsheetfb_par *, u16 reg); + wait_queue_head_t waitq; + int panel_index; + struct mutex io_lock; +}; + +/* board specific routines */ +struct broadsheet_board { + struct module *owner; + int (*init)(struct broadsheetfb_par *); + int (*wait_for_rdy)(struct broadsheetfb_par *); + void (*cleanup)(struct broadsheetfb_par *); + int (*get_panel_type)(void); + int (*setup_irq)(struct fb_info *); + + /* Functions for boards that use GPIO */ + void (*set_ctl)(struct broadsheetfb_par *, unsigned char, u8); + void (*set_hdb)(struct broadsheetfb_par *, u16); + u16 (*get_hdb)(struct broadsheetfb_par *); + + /* Functions for boards that have specialized MMIO */ + void (*mmio_write)(struct broadsheetfb_par *, int type, u16); + u16 (*mmio_read)(struct broadsheetfb_par *); +}; +#endif diff --git a/include/video/cirrus.h b/include/video/cirrus.h index b2776b6c867..9a5e9ee3078 100644 --- a/include/video/cirrus.h +++ b/include/video/cirrus.h @@ -32,7 +32,6 @@ #define CL_VSSM2 0x3c3 /* Motherboard Sleep */ /*** VGA Sequencer Registers ***/ -#define CL_SEQR0 0x0 /* Reset */ /* the following are from the "extension registers" group */ #define CL_SEQR6 0x6 /* Unlock ALL Extensions */ #define CL_SEQR7 0x7 /* Extended Sequencer Mode */ @@ -71,6 +70,7 @@ #define CL_CRT1B 0x1b /* Extended Display Controls */ #define CL_CRT1C 0x1c /* Sync adjust and genlock register */ #define CL_CRT1D 0x1d /* Overlay Extended Control register */ +#define CL_CRT1E 0x1e /* Another overflow register */ #define CL_CRT25 0x25 /* Part Status Register */ #define CL_CRT27 0x27 /* ID Register */ #define CL_CRT51 0x51 /* P4 disable "flicker fixer" */ diff --git a/include/video/cyblafb.h b/include/video/cyblafb.h deleted file mode 100644 index 71744057538..00000000000 --- a/include/video/cyblafb.h +++ /dev/null @@ -1,175 +0,0 @@ - -#ifndef CYBLAFB_DEBUG -#define CYBLAFB_DEBUG 0 -#endif - -#if CYBLAFB_DEBUG -#define debug(f,a...) printk("%s:" f, __FUNCTION__ , ## a); -#else -#define debug(f,a...) -#endif - -#define output(f, a...) printk("cyblafb: " f, ## a) - -#define Kb (1024) -#define Mb (Kb*Kb) - -/* PCI IDS of supported cards temporarily here */ - -#define CYBERBLADEi1 0x8500 - -/* these defines are for 'lcd' variable */ -#define LCD_STRETCH 0 -#define LCD_CENTER 1 -#define LCD_BIOS 2 - -/* display types */ -#define DISPLAY_CRT 0 -#define DISPLAY_FP 1 - -#define ROP_S 0xCC - -#define point(x,y) ((y)<<16|(x)) - -// -// Attribute Regs, ARxx, 3c0/3c1 -// -#define AR00 0x00 -#define AR01 0x01 -#define AR02 0x02 -#define AR03 0x03 -#define AR04 0x04 -#define AR05 0x05 -#define AR06 0x06 -#define AR07 0x07 -#define AR08 0x08 -#define AR09 0x09 -#define AR0A 0x0A -#define AR0B 0x0B -#define AR0C 0x0C -#define AR0D 0x0D -#define AR0E 0x0E -#define AR0F 0x0F -#define AR10 0x10 -#define AR12 0x12 -#define AR13 0x13 - -// -// Sequencer Regs, SRxx, 3c4/3c5 -// -#define SR00 0x00 -#define SR01 0x01 -#define SR02 0x02 -#define SR03 0x03 -#define SR04 0x04 -#define SR0D 0x0D -#define SR0E 0x0E -#define SR11 0x11 -#define SR18 0x18 -#define SR19 0x19 - -// -// -// -#define CR00 0x00 -#define CR01 0x01 -#define CR02 0x02 -#define CR03 0x03 -#define CR04 0x04 -#define CR05 0x05 -#define CR06 0x06 -#define CR07 0x07 -#define CR08 0x08 -#define CR09 0x09 -#define CR0A 0x0A -#define CR0B 0x0B -#define CR0C 0x0C -#define CR0D 0x0D -#define CR0E 0x0E -#define CR0F 0x0F -#define CR10 0x10 -#define CR11 0x11 -#define CR12 0x12 -#define CR13 0x13 -#define CR14 0x14 -#define CR15 0x15 -#define CR16 0x16 -#define CR17 0x17 -#define CR18 0x18 -#define CR19 0x19 -#define CR1A 0x1A -#define CR1B 0x1B -#define CR1C 0x1C -#define CR1D 0x1D -#define CR1E 0x1E -#define CR1F 0x1F -#define CR20 0x20 -#define CR21 0x21 -#define CR27 0x27 -#define CR29 0x29 -#define CR2A 0x2A -#define CR2B 0x2B -#define CR2D 0x2D -#define CR2F 0x2F -#define CR36 0x36 -#define CR38 0x38 -#define CR39 0x39 -#define CR3A 0x3A -#define CR55 0x55 -#define CR56 0x56 -#define CR57 0x57 -#define CR58 0x58 - -// -// -// - -#define GR00 0x01 -#define GR01 0x01 -#define GR02 0x02 -#define GR03 0x03 -#define GR04 0x04 -#define GR05 0x05 -#define GR06 0x06 -#define GR07 0x07 -#define GR08 0x08 -#define GR0F 0x0F -#define GR20 0x20 -#define GR23 0x23 -#define GR2F 0x2F -#define GR30 0x30 -#define GR31 0x31 -#define GR33 0x33 -#define GR52 0x52 -#define GR53 0x53 -#define GR5D 0x5d - - -// -// Graphics Engine -// -#define GEBase 0x2100 // could be mapped elsewhere if we like it -#define GE00 (GEBase+0x00) // source 1, p 111 -#define GE04 (GEBase+0x04) // source 2, p 111 -#define GE08 (GEBase+0x08) // destination 1, p 111 -#define GE0C (GEBase+0x0C) // destination 2, p 112 -#define GE10 (GEBase+0x10) // right view base & enable, p 112 -#define GE13 (GEBase+0x13) // left view base & enable, p 112 -#define GE18 (GEBase+0x18) // block write start address, p 112 -#define GE1C (GEBase+0x1C) // block write end address, p 112 -#define GE20 (GEBase+0x20) // engine status, p 113 -#define GE24 (GEBase+0x24) // reset all GE pointers -#define GE44 (GEBase+0x44) // command register, p 126 -#define GE48 (GEBase+0x48) // raster operation, p 127 -#define GE60 (GEBase+0x60) // foreground color, p 128 -#define GE64 (GEBase+0x64) // background color, p 128 -#define GE6C (GEBase+0x6C) // Pattern and Style, p 129, ok -#define GE9C (GEBase+0x9C) // pixel engine data port, p 125 -#define GEB8 (GEBase+0xB8) // Destination Stride / Buffer Base 0, p 133 -#define GEBC (GEBase+0xBC) // Destination Stride / Buffer Base 1, p 133 -#define GEC0 (GEBase+0xC0) // Destination Stride / Buffer Base 2, p 133 -#define GEC4 (GEBase+0xC4) // Destination Stride / Buffer Base 3, p 133 -#define GEC8 (GEBase+0xC8) // Source Stride / Buffer Base 0, p 133 -#define GECC (GEBase+0xCC) // Source Stride / Buffer Base 1, p 133 -#define GED0 (GEBase+0xD0) // Source Stride / Buffer Base 2, p 133 -#define GED4 (GEBase+0xD4) // Source Stride / Buffer Base 3, p 133 diff --git a/include/video/da8xx-fb.h b/include/video/da8xx-fb.h new file mode 100644 index 00000000000..efed3c3383d --- /dev/null +++ b/include/video/da8xx-fb.h @@ -0,0 +1,95 @@ +/* + * Header file for TI DA8XX LCD controller platform data. + * + * Copyright (C) 2008-2009 MontaVista Software Inc. + * Copyright (C) 2008-2009 Texas Instruments Inc + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef DA8XX_FB_H +#define DA8XX_FB_H + +enum panel_shade { + MONOCHROME = 0, + COLOR_ACTIVE, + COLOR_PASSIVE, +}; + +enum raster_load_mode { + LOAD_DATA = 1, + LOAD_PALETTE, +}; + +enum da8xx_frame_complete { + DA8XX_FRAME_WAIT, + DA8XX_FRAME_NOWAIT, +}; + +struct da8xx_lcdc_platform_data { + const char manu_name[10]; + void *controller_data; + const char type[25]; + void (*panel_power_ctrl)(int); +}; + +struct lcd_ctrl_config { + enum panel_shade panel_shade; + + /* AC Bias Pin Frequency */ + int ac_bias; + + /* AC Bias Pin Transitions per Interrupt */ + int ac_bias_intrpt; + + /* DMA burst size */ + int dma_burst_sz; + + /* Bits per pixel */ + int bpp; + + /* FIFO DMA Request Delay */ + int fdd; + + /* TFT Alternative Signal Mapping (Only for active) */ + unsigned char tft_alt_mode; + + /* 12 Bit Per Pixel (5-6-5) Mode (Only for passive) */ + unsigned char stn_565_mode; + + /* Mono 8-bit Mode: 1=D0-D7 or 0=D0-D3 */ + unsigned char mono_8bit_mode; + + /* Horizontal and Vertical Sync Edge: 0=rising 1=falling */ + unsigned char sync_edge; + + /* Raster Data Order Select: 1=Most-to-least 0=Least-to-most */ + unsigned char raster_order; + + /* DMA FIFO threshold */ + int fifo_th; +}; + +struct lcd_sync_arg { + int back_porch; + int front_porch; + int pulse_width; +}; + +/* ioctls */ +#define FBIOGET_CONTRAST _IOR('F', 1, int) +#define FBIOPUT_CONTRAST _IOW('F', 2, int) +#define FBIGET_BRIGHTNESS _IOR('F', 3, int) +#define FBIPUT_BRIGHTNESS _IOW('F', 3, int) +#define FBIGET_COLOR _IOR('F', 5, int) +#define FBIPUT_COLOR _IOW('F', 6, int) +#define FBIPUT_HSYNC _IOW('F', 9, int) +#define FBIPUT_VSYNC _IOW('F', 10, int) + +/* Proprietary FB_SYNC_ flags */ +#define FB_SYNC_CLK_INVERT 0x40000000 + +#endif /* ifndef DA8XX_FB_H */ + diff --git a/include/video/display_timing.h b/include/video/display_timing.h new file mode 100644 index 00000000000..28d9d0d566c --- /dev/null +++ b/include/video/display_timing.h @@ -0,0 +1,102 @@ +/* + * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de> + * + * description of display timings + * + * This file is released under the GPLv2 + */ + +#ifndef __LINUX_DISPLAY_TIMING_H +#define __LINUX_DISPLAY_TIMING_H + +#include <linux/bitops.h> +#include <linux/types.h> + +enum display_flags { + DISPLAY_FLAGS_HSYNC_LOW = BIT(0), + DISPLAY_FLAGS_HSYNC_HIGH = BIT(1), + DISPLAY_FLAGS_VSYNC_LOW = BIT(2), + DISPLAY_FLAGS_VSYNC_HIGH = BIT(3), + + /* data enable flag */ + DISPLAY_FLAGS_DE_LOW = BIT(4), + DISPLAY_FLAGS_DE_HIGH = BIT(5), + /* drive data on pos. edge */ + DISPLAY_FLAGS_PIXDATA_POSEDGE = BIT(6), + /* drive data on neg. edge */ + DISPLAY_FLAGS_PIXDATA_NEGEDGE = BIT(7), + DISPLAY_FLAGS_INTERLACED = BIT(8), + DISPLAY_FLAGS_DOUBLESCAN = BIT(9), + DISPLAY_FLAGS_DOUBLECLK = BIT(10), +}; + +/* + * A single signal can be specified via a range of minimal and maximal values + * with a typical value, that lies somewhere inbetween. + */ +struct timing_entry { + u32 min; + u32 typ; + u32 max; +}; + +/* + * Single "mode" entry. This describes one set of signal timings a display can + * have in one setting. This struct can later be converted to struct videomode + * (see include/video/videomode.h). As each timing_entry can be defined as a + * range, one struct display_timing may become multiple struct videomodes. + * + * Example: hsync active high, vsync active low + * + * Active Video + * Video ______________________XXXXXXXXXXXXXXXXXXXXXX_____________________ + * |<- sync ->|<- back ->|<----- active ----->|<- front ->|<- sync.. + * | | porch | | porch | + * + * HSync _|¯¯¯¯¯¯¯¯¯¯|___________________________________________|¯¯¯¯¯¯¯¯¯ + * + * VSync ¯|__________|¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯|_________ + */ +struct display_timing { + struct timing_entry pixelclock; + + struct timing_entry hactive; /* hor. active video */ + struct timing_entry hfront_porch; /* hor. front porch */ + struct timing_entry hback_porch; /* hor. back porch */ + struct timing_entry hsync_len; /* hor. sync len */ + + struct timing_entry vactive; /* ver. active video */ + struct timing_entry vfront_porch; /* ver. front porch */ + struct timing_entry vback_porch; /* ver. back porch */ + struct timing_entry vsync_len; /* ver. sync len */ + + enum display_flags flags; /* display flags */ +}; + +/* + * This describes all timing settings a display provides. + * The native_mode is the default setting for this display. + * Drivers that can handle multiple videomodes should work with this struct and + * convert each entry to the desired end result. + */ +struct display_timings { + unsigned int num_timings; + unsigned int native_mode; + + struct display_timing **timings; +}; + +/* get one entry from struct display_timings */ +static inline struct display_timing *display_timings_get(const struct + display_timings *disp, + unsigned int index) +{ + if (disp->num_timings > index) + return disp->timings[index]; + else + return NULL; +} + +void display_timings_release(struct display_timings *disp); + +#endif diff --git a/include/video/edid.h b/include/video/edid.h index 928c342b33d..0cb8b2a92b7 100644 --- a/include/video/edid.h +++ b/include/video/edid.h @@ -1,16 +1,9 @@ #ifndef __linux_video_edid_h__ #define __linux_video_edid_h__ -#if !defined(__KERNEL__) || defined(CONFIG_X86) +#include <uapi/video/edid.h> -struct edid_info { - unsigned char dummy[128]; -}; - -#ifdef __KERNEL__ +#ifdef CONFIG_X86 extern struct edid_info edid_info; -#endif /* __KERNEL__ */ - #endif - #endif /* __linux_video_edid_h__ */ diff --git a/include/video/epson1355.h b/include/video/epson1355.h deleted file mode 100644 index 9759f299499..00000000000 --- a/include/video/epson1355.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * include/video/epson13xx.h -- Epson 13xx frame buffer - * - * Copyright (C) Hewlett-Packard Company. All rights reserved. - * - * Written by Christopher Hoover <ch@hpl.hp.com> - * - */ - -#ifndef _EPSON13XX_H_ -#define _EPSON13XX_H_ - -#define REG_REVISION_CODE 0x00 -#define REG_MEMORY_CONFIG 0x01 -#define REG_PANEL_TYPE 0x02 -#define REG_MOD_RATE 0x03 -#define REG_HORZ_DISP_WIDTH 0x04 -#define REG_HORZ_NONDISP_PERIOD 0x05 -#define REG_HRTC_START_POSITION 0x06 -#define REG_HRTC_PULSE_WIDTH 0x07 -#define REG_VERT_DISP_HEIGHT0 0x08 -#define REG_VERT_DISP_HEIGHT1 0x09 -#define REG_VERT_NONDISP_PERIOD 0x0A -#define REG_VRTC_START_POSITION 0x0B -#define REG_VRTC_PULSE_WIDTH 0x0C -#define REG_DISPLAY_MODE 0x0D -#define REG_SCRN1_LINE_COMPARE0 0x0E -#define REG_SCRN1_LINE_COMPARE1 0x0F -#define REG_SCRN1_DISP_START_ADDR0 0x10 -#define REG_SCRN1_DISP_START_ADDR1 0x11 -#define REG_SCRN1_DISP_START_ADDR2 0x12 -#define REG_SCRN2_DISP_START_ADDR0 0x13 -#define REG_SCRN2_DISP_START_ADDR1 0x14 -#define REG_SCRN2_DISP_START_ADDR2 0x15 -#define REG_MEM_ADDR_OFFSET0 0x16 -#define REG_MEM_ADDR_OFFSET1 0x17 -#define REG_PIXEL_PANNING 0x18 -#define REG_CLOCK_CONFIG 0x19 -#define REG_POWER_SAVE_CONFIG 0x1A -#define REG_MISC 0x1B -#define REG_MD_CONFIG_READBACK0 0x1C -#define REG_MD_CONFIG_READBACK1 0x1D -#define REG_GPIO_CONFIG0 0x1E -#define REG_GPIO_CONFIG1 0x1F -#define REG_GPIO_CONTROL0 0x20 -#define REG_GPIO_CONTROL1 0x21 -#define REG_PERF_ENHANCEMENT0 0x22 -#define REG_PERF_ENHANCEMENT1 0x23 -#define REG_LUT_ADDR 0x24 -#define REG_RESERVED_1 0x25 -#define REG_LUT_DATA 0x26 -#define REG_INK_CURSOR_CONTROL 0x27 -#define REG_CURSOR_X_POSITION0 0x28 -#define REG_CURSOR_X_POSITION1 0x29 -#define REG_CURSOR_Y_POSITION0 0x2A -#define REG_CURSOR_Y_POSITION1 0x2B -#define REG_INK_CURSOR_COLOR0_0 0x2C -#define REG_INK_CURSOR_COLOR0_1 0x2D -#define REG_INK_CURSOR_COLOR1_0 0x2E -#define REG_INK_CURSOR_COLOR1_1 0x2F -#define REG_INK_CURSOR_START_ADDR 0x30 -#define REG_ALTERNATE_FRM 0x31 - -#endif diff --git a/include/video/exynos_mipi_dsim.h b/include/video/exynos_mipi_dsim.h new file mode 100644 index 00000000000..6a578f8a1b3 --- /dev/null +++ b/include/video/exynos_mipi_dsim.h @@ -0,0 +1,358 @@ +/* include/video/exynos_mipi_dsim.h + * + * Platform data header for Samsung SoC MIPI-DSIM. + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd + * + * InKi Dae <inki.dae@samsung.com> + * Donghwa Lee <dh09.lee@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef _EXYNOS_MIPI_DSIM_H +#define _EXYNOS_MIPI_DSIM_H + +#include <linux/device.h> +#include <linux/fb.h> + +#define PANEL_NAME_SIZE (32) + +/* + * Enumerate display interface type. + * + * DSIM_COMMAND means cpu interface and rgb interface for DSIM_VIDEO. + * + * P.S. MIPI DSI Master has two display controller intefaces, RGB Interface + * for main display and CPU Interface(same as I80 Interface) for main + * and sub display. + */ +enum mipi_dsim_interface_type { + DSIM_COMMAND, + DSIM_VIDEO +}; + +enum mipi_dsim_virtual_ch_no { + DSIM_VIRTUAL_CH_0, + DSIM_VIRTUAL_CH_1, + DSIM_VIRTUAL_CH_2, + DSIM_VIRTUAL_CH_3 +}; + +enum mipi_dsim_burst_mode_type { + DSIM_NON_BURST_SYNC_EVENT, + DSIM_BURST_SYNC_EVENT, + DSIM_NON_BURST_SYNC_PULSE, + DSIM_BURST, + DSIM_NON_VIDEO_MODE +}; + +enum mipi_dsim_no_of_data_lane { + DSIM_DATA_LANE_1, + DSIM_DATA_LANE_2, + DSIM_DATA_LANE_3, + DSIM_DATA_LANE_4 +}; + +enum mipi_dsim_byte_clk_src { + DSIM_PLL_OUT_DIV8, + DSIM_EXT_CLK_DIV8, + DSIM_EXT_CLK_BYPASS +}; + +enum mipi_dsim_pixel_format { + DSIM_CMD_3BPP, + DSIM_CMD_8BPP, + DSIM_CMD_12BPP, + DSIM_CMD_16BPP, + DSIM_VID_16BPP_565, + DSIM_VID_18BPP_666PACKED, + DSIM_18BPP_666LOOSELYPACKED, + DSIM_24BPP_888 +}; + +/* + * struct mipi_dsim_config - interface for configuring mipi-dsi controller. + * + * @auto_flush: enable or disable Auto flush of MD FIFO using VSYNC pulse. + * @eot_disable: enable or disable EoT packet in HS mode. + * @auto_vertical_cnt: specifies auto vertical count mode. + * in Video mode, the vertical line transition uses line counter + * configured by VSA, VBP, and Vertical resolution. + * If this bit is set to '1', the line counter does not use VSA and VBP + * registers.(in command mode, this variable is ignored) + * @hse: set horizontal sync event mode. + * In VSYNC pulse and Vporch area, MIPI DSI master transfers only HSYNC + * start packet to MIPI DSI slave at MIPI DSI spec1.1r02. + * this bit transfers HSYNC end packet in VSYNC pulse and Vporch area + * (in mommand mode, this variable is ignored) + * @hfp: specifies HFP disable mode. + * if this variable is set, DSI master ignores HFP area in VIDEO mode. + * (in command mode, this variable is ignored) + * @hbp: specifies HBP disable mode. + * if this variable is set, DSI master ignores HBP area in VIDEO mode. + * (in command mode, this variable is ignored) + * @hsa: specifies HSA disable mode. + * if this variable is set, DSI master ignores HSA area in VIDEO mode. + * (in command mode, this variable is ignored) + * @cma_allow: specifies the number of horizontal lines, where command packet + * transmission is allowed after Stable VFP period. + * @e_interface: specifies interface to be used.(CPU or RGB interface) + * @e_virtual_ch: specifies virtual channel number that main or + * sub diaplsy uses. + * @e_pixel_format: specifies pixel stream format for main or sub display. + * @e_burst_mode: selects Burst mode in Video mode. + * in Non-burst mode, RGB data area is filled with RGB data and NULL + * packets, according to input bandwidth of RGB interface. + * In Burst mode, RGB data area is filled with RGB data only. + * @e_no_data_lane: specifies data lane count to be used by Master. + * @e_byte_clk: select byte clock source. (it must be DSIM_PLL_OUT_DIV8) + * DSIM_EXT_CLK_DIV8 and DSIM_EXT_CLK_BYPASSS are not supported. + * @pll_stable_time: specifies the PLL Timer for stability of the ganerated + * clock(System clock cycle base) + * if the timer value goes to 0x00000000, the clock stable bit of status + * and interrupt register is set. + * @esc_clk: specifies escape clock frequency for getting the escape clock + * prescaler value. + * @stop_holding_cnt: specifies the interval value between transmitting + * read packet(or write "set_tear_on" command) and BTA request. + * after transmitting read packet or write "set_tear_on" command, + * BTA requests to D-PHY automatically. this counter value specifies + * the interval between them. + * @bta_timeout: specifies the timer for BTA. + * this register specifies time out from BTA request to change + * the direction with respect to Tx escape clock. + * @rx_timeout: specifies the timer for LP Rx mode timeout. + * this register specifies time out on how long RxValid deasserts, + * after RxLpdt asserts with respect to Tx escape clock. + * - RxValid specifies Rx data valid indicator. + * - RxLpdt specifies an indicator that D-PHY is under RxLpdt mode. + * - RxValid and RxLpdt specifies signal from D-PHY. + */ +struct mipi_dsim_config { + unsigned char auto_flush; + unsigned char eot_disable; + + unsigned char auto_vertical_cnt; + unsigned char hse; + unsigned char hfp; + unsigned char hbp; + unsigned char hsa; + unsigned char cmd_allow; + + enum mipi_dsim_interface_type e_interface; + enum mipi_dsim_virtual_ch_no e_virtual_ch; + enum mipi_dsim_pixel_format e_pixel_format; + enum mipi_dsim_burst_mode_type e_burst_mode; + enum mipi_dsim_no_of_data_lane e_no_data_lane; + enum mipi_dsim_byte_clk_src e_byte_clk; + + /* + * =========================================== + * | P | M | S | MHz | + * ------------------------------------------- + * | 3 | 100 | 3 | 100 | + * | 3 | 100 | 2 | 200 | + * | 3 | 63 | 1 | 252 | + * | 4 | 100 | 1 | 300 | + * | 4 | 110 | 1 | 330 | + * | 12 | 350 | 1 | 350 | + * | 3 | 100 | 1 | 400 | + * | 4 | 150 | 1 | 450 | + * | 6 | 118 | 1 | 472 | + * | 3 | 120 | 1 | 480 | + * | 12 | 250 | 0 | 500 | + * | 4 | 100 | 0 | 600 | + * | 3 | 81 | 0 | 648 | + * | 3 | 88 | 0 | 704 | + * | 3 | 90 | 0 | 720 | + * | 3 | 100 | 0 | 800 | + * | 12 | 425 | 0 | 850 | + * | 4 | 150 | 0 | 900 | + * | 12 | 475 | 0 | 950 | + * | 6 | 250 | 0 | 1000 | + * ------------------------------------------- + */ + + /* + * pms could be calculated as the following. + * M * 24 / P * 2 ^ S = MHz + */ + unsigned char p; + unsigned short m; + unsigned char s; + + unsigned int pll_stable_time; + unsigned long esc_clk; + + unsigned short stop_holding_cnt; + unsigned char bta_timeout; + unsigned short rx_timeout; +}; + +/* + * struct mipi_dsim_device - global interface for mipi-dsi driver. + * + * @dev: driver model representation of the device. + * @id: unique device id. + * @clock: pointer to MIPI-DSI clock of clock framework. + * @irq: interrupt number to MIPI-DSI controller. + * @reg_base: base address to memory mapped SRF of MIPI-DSI controller. + * (virtual address) + * @lock: the mutex protecting this data structure. + * @dsim_info: infomation for configuring mipi-dsi controller. + * @master_ops: callbacks to mipi-dsi operations. + * @dsim_lcd_dev: pointer to activated ddi device. + * (it would be registered by mipi-dsi driver.) + * @dsim_lcd_drv: pointer to activated_ddi driver. + * (it would be registered by mipi-dsi driver.) + * @lcd_info: pointer to mipi_lcd_info structure. + * @state: specifies status of MIPI-DSI controller. + * the status could be RESET, INIT, STOP, HSCLKEN and ULPS. + * @data_lane: specifiec enabled data lane number. + * this variable would be set by driver according to e_no_data_lane + * automatically. + * @e_clk_src: select byte clock source. + * @pd: pointer to MIPI-DSI driver platform data. + * @phy: pointer to the MIPI-DSI PHY + */ +struct mipi_dsim_device { + struct device *dev; + int id; + struct clk *clock; + unsigned int irq; + void __iomem *reg_base; + struct mutex lock; + + struct mipi_dsim_config *dsim_config; + struct mipi_dsim_master_ops *master_ops; + struct mipi_dsim_lcd_device *dsim_lcd_dev; + struct mipi_dsim_lcd_driver *dsim_lcd_drv; + + unsigned int state; + unsigned int data_lane; + unsigned int e_clk_src; + bool suspended; + + struct mipi_dsim_platform_data *pd; + struct phy *phy; +}; + +/* + * struct mipi_dsim_platform_data - interface to platform data + * for mipi-dsi driver. + * + * @lcd_panel_name: specifies lcd panel name registered to mipi-dsi driver. + * lcd panel driver searched would be actived. + * @dsim_config: pointer of structure for configuring mipi-dsi controller. + * @enabled: indicate whether mipi controller got enabled or not. + * @lcd_panel_info: pointer for lcd panel specific structure. + * this structure specifies width, height, timing and polarity and so on. + */ +struct mipi_dsim_platform_data { + char lcd_panel_name[PANEL_NAME_SIZE]; + + struct mipi_dsim_config *dsim_config; + unsigned int enabled; + void *lcd_panel_info; +}; + +/* + * struct mipi_dsim_master_ops - callbacks to mipi-dsi operations. + * + * @cmd_write: transfer command to lcd panel at LP mode. + * @cmd_read: read command from rx register. + * @get_dsim_frame_done: get the status that all screen data have been + * transferred to mipi-dsi. + * @clear_dsim_frame_done: clear frame done status. + * @get_fb_frame_done: get frame done status of display controller. + * @trigger: trigger display controller. + * - this one would be used only in case of CPU mode. + * @set_early_blank_mode: set framebuffer blank mode. + * - this callback should be called prior to fb_blank() by a client driver + * only if needing. + * @set_blank_mode: set framebuffer blank mode. + * - this callback should be called after fb_blank() by a client driver + * only if needing. + */ + +struct mipi_dsim_master_ops { + int (*cmd_write)(struct mipi_dsim_device *dsim, unsigned int data_id, + const unsigned char *data0, unsigned int data1); + int (*cmd_read)(struct mipi_dsim_device *dsim, unsigned int data_id, + unsigned int data0, unsigned int req_size, u8 *rx_buf); + int (*get_dsim_frame_done)(struct mipi_dsim_device *dsim); + int (*clear_dsim_frame_done)(struct mipi_dsim_device *dsim); + + int (*get_fb_frame_done)(struct fb_info *info); + void (*trigger)(struct fb_info *info); + int (*set_early_blank_mode)(struct mipi_dsim_device *dsim, int power); + int (*set_blank_mode)(struct mipi_dsim_device *dsim, int power); +}; + +/* + * device structure for mipi-dsi based lcd panel. + * + * @name: name of the device to use with this device, or an + * alias for that name. + * @dev: driver model representation of the device. + * @id: id of device to be registered. + * @bus_id: bus id for identifing connected bus + * and this bus id should be same as id of mipi_dsim_device. + * @irq: irq number for signaling when framebuffer transfer of + * lcd panel module is completed. + * this irq would be used only for MIPI-DSI based CPU mode lcd panel. + * @master: pointer to mipi-dsi master device object. + * @platform_data: lcd panel specific platform data. + */ +struct mipi_dsim_lcd_device { + char *name; + struct device dev; + int id; + int bus_id; + int irq; + int panel_reverse; + + struct mipi_dsim_device *master; + void *platform_data; +}; + +/* + * driver structure for mipi-dsi based lcd panel. + * + * this structure should be registered by lcd panel driver. + * mipi-dsi driver seeks lcd panel registered through name field + * and calls these callback functions in appropriate time. + * + * @name: name of the driver to use with this device, or an + * alias for that name. + * @id: id of driver to be registered. + * this id would be used for finding device object registered. + */ +struct mipi_dsim_lcd_driver { + char *name; + int id; + + void (*power_on)(struct mipi_dsim_lcd_device *dsim_dev, int enable); + void (*set_sequence)(struct mipi_dsim_lcd_device *dsim_dev); + int (*probe)(struct mipi_dsim_lcd_device *dsim_dev); + int (*remove)(struct mipi_dsim_lcd_device *dsim_dev); + void (*shutdown)(struct mipi_dsim_lcd_device *dsim_dev); + int (*suspend)(struct mipi_dsim_lcd_device *dsim_dev); + int (*resume)(struct mipi_dsim_lcd_device *dsim_dev); +}; + +/* + * register mipi_dsim_lcd_device to mipi-dsi master. + */ +int exynos_mipi_dsi_register_lcd_device(struct mipi_dsim_lcd_device + *lcd_dev); +/** + * register mipi_dsim_lcd_driver object defined by lcd panel driver + * to mipi-dsi driver. + */ +int exynos_mipi_dsi_register_lcd_driver(struct mipi_dsim_lcd_driver + *lcd_drv); +#endif /* _EXYNOS_MIPI_DSIM_H */ diff --git a/include/video/hecubafb.h b/include/video/hecubafb.h new file mode 100644 index 00000000000..7b995233976 --- /dev/null +++ b/include/video/hecubafb.h @@ -0,0 +1,51 @@ +/* + * hecubafb.h - definitions for the hecuba framebuffer driver + * + * Copyright (C) 2008 by Jaya Kumar + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + * + */ + +#ifndef _LINUX_HECUBAFB_H_ +#define _LINUX_HECUBAFB_H_ + +/* Apollo controller specific defines */ +#define APOLLO_START_NEW_IMG 0xA0 +#define APOLLO_STOP_IMG_DATA 0xA1 +#define APOLLO_DISPLAY_IMG 0xA2 +#define APOLLO_ERASE_DISPLAY 0xA3 +#define APOLLO_INIT_DISPLAY 0xA4 + +/* Hecuba interface specific defines */ +#define HCB_WUP_BIT 0x01 +#define HCB_DS_BIT 0x02 +#define HCB_RW_BIT 0x04 +#define HCB_CD_BIT 0x08 +#define HCB_ACK_BIT 0x80 + +/* struct used by hecuba. board specific stuff comes from *board */ +struct hecubafb_par { + struct fb_info *info; + struct hecuba_board *board; + void (*send_command)(struct hecubafb_par *, unsigned char); + void (*send_data)(struct hecubafb_par *, unsigned char); +}; + +/* board specific routines +board drivers can implement wait_for_ack with interrupts if desired. if +wait_for_ack is called with clear=0, then go to sleep and return when ack +goes hi or if wait_for_ack with clear=1, then return when ack goes lo */ +struct hecuba_board { + struct module *owner; + void (*remove)(struct hecubafb_par *); + void (*set_ctl)(struct hecubafb_par *, unsigned char, unsigned char); + void (*set_data)(struct hecubafb_par *, unsigned char); + void (*wait_for_ack)(struct hecubafb_par *, int); + int (*init)(struct hecubafb_par *); +}; + + +#endif diff --git a/include/video/ili9320.h b/include/video/ili9320.h new file mode 100644 index 00000000000..e5d1622e3f3 --- /dev/null +++ b/include/video/ili9320.h @@ -0,0 +1,201 @@ +/* include/video/ili9320.c + * + * ILI9320 LCD controller configuration control. + * + * Copyright 2007 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define ILI9320_REG(x) (x) + +#define ILI9320_INDEX ILI9320_REG(0x00) + +#define ILI9320_OSCILATION ILI9320_REG(0x00) +#define ILI9320_DRIVER ILI9320_REG(0x01) +#define ILI9320_DRIVEWAVE ILI9320_REG(0x02) +#define ILI9320_ENTRYMODE ILI9320_REG(0x03) +#define ILI9320_RESIZING ILI9320_REG(0x04) +#define ILI9320_DISPLAY1 ILI9320_REG(0x07) +#define ILI9320_DISPLAY2 ILI9320_REG(0x08) +#define ILI9320_DISPLAY3 ILI9320_REG(0x09) +#define ILI9320_DISPLAY4 ILI9320_REG(0x0A) +#define ILI9320_RGB_IF1 ILI9320_REG(0x0C) +#define ILI9320_FRAMEMAKER ILI9320_REG(0x0D) +#define ILI9320_RGB_IF2 ILI9320_REG(0x0F) + +#define ILI9320_POWER1 ILI9320_REG(0x10) +#define ILI9320_POWER2 ILI9320_REG(0x11) +#define ILI9320_POWER3 ILI9320_REG(0x12) +#define ILI9320_POWER4 ILI9320_REG(0x13) +#define ILI9320_GRAM_HORIZ_ADDR ILI9320_REG(0x20) +#define ILI9320_GRAM_VERT_ADD ILI9320_REG(0x21) +#define ILI9320_POWER7 ILI9320_REG(0x29) +#define ILI9320_FRAME_RATE_COLOUR ILI9320_REG(0x2B) + +#define ILI9320_GAMMA1 ILI9320_REG(0x30) +#define ILI9320_GAMMA2 ILI9320_REG(0x31) +#define ILI9320_GAMMA3 ILI9320_REG(0x32) +#define ILI9320_GAMMA4 ILI9320_REG(0x35) +#define ILI9320_GAMMA5 ILI9320_REG(0x36) +#define ILI9320_GAMMA6 ILI9320_REG(0x37) +#define ILI9320_GAMMA7 ILI9320_REG(0x38) +#define ILI9320_GAMMA8 ILI9320_REG(0x39) +#define ILI9320_GAMMA9 ILI9320_REG(0x3C) +#define ILI9320_GAMMA10 ILI9320_REG(0x3D) + +#define ILI9320_HORIZ_START ILI9320_REG(0x50) +#define ILI9320_HORIZ_END ILI9320_REG(0x51) +#define ILI9320_VERT_START ILI9320_REG(0x52) +#define ILI9320_VERT_END ILI9320_REG(0x53) + +#define ILI9320_DRIVER2 ILI9320_REG(0x60) +#define ILI9320_BASE_IMAGE ILI9320_REG(0x61) +#define ILI9320_VERT_SCROLL ILI9320_REG(0x6a) + +#define ILI9320_PARTIAL1_POSITION ILI9320_REG(0x80) +#define ILI9320_PARTIAL1_START ILI9320_REG(0x81) +#define ILI9320_PARTIAL1_END ILI9320_REG(0x82) +#define ILI9320_PARTIAL2_POSITION ILI9320_REG(0x83) +#define ILI9320_PARTIAL2_START ILI9320_REG(0x84) +#define ILI9320_PARTIAL2_END ILI9320_REG(0x85) + +#define ILI9320_INTERFACE1 ILI9320_REG(0x90) +#define ILI9320_INTERFACE2 ILI9320_REG(0x92) +#define ILI9320_INTERFACE3 ILI9320_REG(0x93) +#define ILI9320_INTERFACE4 ILI9320_REG(0x95) +#define ILI9320_INTERFACE5 ILI9320_REG(0x97) +#define ILI9320_INTERFACE6 ILI9320_REG(0x98) + +/* Register contents definitions. */ + +#define ILI9320_OSCILATION_OSC (1 << 0) + +#define ILI9320_DRIVER_SS (1 << 8) +#define ILI9320_DRIVER_SM (1 << 10) + +#define ILI9320_DRIVEWAVE_EOR (1 << 8) +#define ILI9320_DRIVEWAVE_BC (1 << 9) +#define ILI9320_DRIVEWAVE_MUSTSET (1 << 10) + +#define ILI9320_ENTRYMODE_AM (1 << 3) +#define ILI9320_ENTRYMODE_ID(x) ((x) << 4) +#define ILI9320_ENTRYMODE_ORG (1 << 7) +#define ILI9320_ENTRYMODE_HWM (1 << 8) +#define ILI9320_ENTRYMODE_BGR (1 << 12) +#define ILI9320_ENTRYMODE_DFM (1 << 14) +#define ILI9320_ENTRYMODE_TRI (1 << 15) + + +#define ILI9320_RESIZING_RSZ(x) ((x) << 0) +#define ILI9320_RESIZING_RCH(x) ((x) << 4) +#define ILI9320_RESIZING_RCV(x) ((x) << 8) + + +#define ILI9320_DISPLAY1_D(x) ((x) << 0) +#define ILI9320_DISPLAY1_CL (1 << 3) +#define ILI9320_DISPLAY1_DTE (1 << 4) +#define ILI9320_DISPLAY1_GON (1 << 5) +#define ILI9320_DISPLAY1_BASEE (1 << 8) +#define ILI9320_DISPLAY1_PTDE(x) ((x) << 12) + + +#define ILI9320_DISPLAY2_BP(x) ((x) << 0) +#define ILI9320_DISPLAY2_FP(x) ((x) << 8) + + +#define ILI9320_RGBIF1_RIM_RGB18 (0 << 0) +#define ILI9320_RGBIF1_RIM_RGB16 (1 << 0) +#define ILI9320_RGBIF1_RIM_RGB6 (2 << 0) + +#define ILI9320_RGBIF1_CLK_INT (0 << 4) +#define ILI9320_RGBIF1_CLK_RGBIF (1 << 4) +#define ILI9320_RGBIF1_CLK_VSYNC (2 << 4) + +#define ILI9320_RGBIF1_RM (1 << 8) + +#define ILI9320_RGBIF1_ENC_FRAMES(x) (((x) - 1)<< 13) + +#define ILI9320_RGBIF2_DPL (1 << 0) +#define ILI9320_RGBIF2_EPL (1 << 1) +#define ILI9320_RGBIF2_HSPL (1 << 3) +#define ILI9320_RGBIF2_VSPL (1 << 4) + + +#define ILI9320_POWER1_SLP (1 << 1) +#define ILI9320_POWER1_DSTB (1 << 2) +#define ILI9320_POWER1_AP(x) ((x) << 4) +#define ILI9320_POWER1_APE (1 << 7) +#define ILI9320_POWER1_BT(x) ((x) << 8) +#define ILI9320_POWER1_SAP (1 << 12) + + +#define ILI9320_POWER2_VC(x) ((x) << 0) +#define ILI9320_POWER2_DC0(x) ((x) << 4) +#define ILI9320_POWER2_DC1(x) ((x) << 8) + + +#define ILI9320_POWER3_VRH(x) ((x) << 0) +#define ILI9320_POWER3_PON (1 << 4) +#define ILI9320_POWER3_VCMR (1 << 8) + + +#define ILI9320_POWER4_VREOUT(x) ((x) << 8) + + +#define ILI9320_DRIVER2_SCNL(x) ((x) << 0) +#define ILI9320_DRIVER2_NL(x) ((x) << 8) +#define ILI9320_DRIVER2_GS (1 << 15) + + +#define ILI9320_BASEIMAGE_REV (1 << 0) +#define ILI9320_BASEIMAGE_VLE (1 << 1) +#define ILI9320_BASEIMAGE_NDL (1 << 2) + + +#define ILI9320_INTERFACE4_RTNE(x) (x) +#define ILI9320_INTERFACE4_DIVE(x) ((x) << 8) + +/* SPI interface definitions */ + +#define ILI9320_SPI_IDCODE (0x70) +#define ILI9320_SPI_ID(x) ((x) << 2) +#define ILI9320_SPI_READ (0x01) +#define ILI9320_SPI_WRITE (0x00) +#define ILI9320_SPI_DATA (0x02) +#define ILI9320_SPI_INDEX (0x00) + +/* platform data to pass configuration from lcd */ + +enum ili9320_suspend { + ILI9320_SUSPEND_OFF, + ILI9320_SUSPEND_DEEP, +}; + +struct ili9320_platdata { + unsigned short hsize; + unsigned short vsize; + + enum ili9320_suspend suspend; + + /* set the reset line, 0 = reset asserted, 1 = normal */ + void (*reset)(unsigned int val); + + unsigned short entry_mode; + unsigned short display2; + unsigned short display3; + unsigned short display4; + unsigned short rgb_if1; + unsigned short rgb_if2; + unsigned short interface2; + unsigned short interface3; + unsigned short interface4; + unsigned short interface5; + unsigned short interface6; +}; + diff --git a/include/video/imx-ipu-v3.h b/include/video/imx-ipu-v3.h new file mode 100644 index 00000000000..3e43e22cdff --- /dev/null +++ b/include/video/imx-ipu-v3.h @@ -0,0 +1,347 @@ +/* + * Copyright 2005-2009 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU Lesser General + * Public License. You may obtain a copy of the GNU Lesser General + * Public License Version 2.1 or later at the following locations: + * + * http://www.opensource.org/licenses/lgpl-license.html + * http://www.gnu.org/copyleft/lgpl.html + */ + +#ifndef __DRM_IPU_H__ +#define __DRM_IPU_H__ + +#include <linux/types.h> +#include <linux/videodev2.h> +#include <linux/bitmap.h> +#include <linux/fb.h> + +struct ipu_soc; + +enum ipuv3_type { + IPUV3EX, + IPUV3M, + IPUV3H, +}; + +#define IPU_PIX_FMT_GBR24 v4l2_fourcc('G', 'B', 'R', '3') + +/* + * Bitfield of Display Interface signal polarities. + */ +struct ipu_di_signal_cfg { + unsigned datamask_en:1; + unsigned interlaced:1; + unsigned odd_field_first:1; + unsigned clksel_en:1; + unsigned clkidle_en:1; + unsigned data_pol:1; /* true = inverted */ + unsigned clk_pol:1; /* true = rising edge */ + unsigned enable_pol:1; + unsigned Hsync_pol:1; /* true = active high */ + unsigned Vsync_pol:1; + + u16 width; + u16 height; + u32 pixel_fmt; + u16 h_start_width; + u16 h_sync_width; + u16 h_end_width; + u16 v_start_width; + u16 v_sync_width; + u16 v_end_width; + u32 v_to_h_sync; + unsigned long pixelclock; +#define IPU_DI_CLKMODE_SYNC (1 << 0) +#define IPU_DI_CLKMODE_EXT (1 << 1) + unsigned long clkflags; + + u8 hsync_pin; + u8 vsync_pin; +}; + +enum ipu_color_space { + IPUV3_COLORSPACE_RGB, + IPUV3_COLORSPACE_YUV, + IPUV3_COLORSPACE_UNKNOWN, +}; + +struct ipuv3_channel; + +enum ipu_channel_irq { + IPU_IRQ_EOF = 0, + IPU_IRQ_NFACK = 64, + IPU_IRQ_NFB4EOF = 128, + IPU_IRQ_EOS = 192, +}; + +int ipu_map_irq(struct ipu_soc *ipu, int irq); +int ipu_idmac_channel_irq(struct ipu_soc *ipu, struct ipuv3_channel *channel, + enum ipu_channel_irq irq); + +#define IPU_IRQ_DP_SF_START (448 + 2) +#define IPU_IRQ_DP_SF_END (448 + 3) +#define IPU_IRQ_BG_SF_END IPU_IRQ_DP_SF_END, +#define IPU_IRQ_DC_FC_0 (448 + 8) +#define IPU_IRQ_DC_FC_1 (448 + 9) +#define IPU_IRQ_DC_FC_2 (448 + 10) +#define IPU_IRQ_DC_FC_3 (448 + 11) +#define IPU_IRQ_DC_FC_4 (448 + 12) +#define IPU_IRQ_DC_FC_6 (448 + 13) +#define IPU_IRQ_VSYNC_PRE_0 (448 + 14) +#define IPU_IRQ_VSYNC_PRE_1 (448 + 15) + +/* + * IPU Image DMA Controller (idmac) functions + */ +struct ipuv3_channel *ipu_idmac_get(struct ipu_soc *ipu, unsigned channel); +void ipu_idmac_put(struct ipuv3_channel *); + +int ipu_idmac_enable_channel(struct ipuv3_channel *channel); +int ipu_idmac_disable_channel(struct ipuv3_channel *channel); +int ipu_idmac_wait_busy(struct ipuv3_channel *channel, int ms); + +void ipu_idmac_set_double_buffer(struct ipuv3_channel *channel, + bool doublebuffer); +int ipu_idmac_get_current_buffer(struct ipuv3_channel *channel); +void ipu_idmac_select_buffer(struct ipuv3_channel *channel, u32 buf_num); + +/* + * IPU Display Controller (dc) functions + */ +struct ipu_dc; +struct ipu_di; +struct ipu_dc *ipu_dc_get(struct ipu_soc *ipu, int channel); +void ipu_dc_put(struct ipu_dc *dc); +int ipu_dc_init_sync(struct ipu_dc *dc, struct ipu_di *di, bool interlaced, + u32 pixel_fmt, u32 width); +void ipu_dc_enable(struct ipu_soc *ipu); +void ipu_dc_enable_channel(struct ipu_dc *dc); +void ipu_dc_disable_channel(struct ipu_dc *dc); +void ipu_dc_disable(struct ipu_soc *ipu); + +/* + * IPU Display Interface (di) functions + */ +struct ipu_di *ipu_di_get(struct ipu_soc *ipu, int disp); +void ipu_di_put(struct ipu_di *); +int ipu_di_disable(struct ipu_di *); +int ipu_di_enable(struct ipu_di *); +int ipu_di_get_num(struct ipu_di *); +int ipu_di_init_sync_panel(struct ipu_di *, struct ipu_di_signal_cfg *sig); + +/* + * IPU Display Multi FIFO Controller (dmfc) functions + */ +struct dmfc_channel; +int ipu_dmfc_enable_channel(struct dmfc_channel *dmfc); +void ipu_dmfc_disable_channel(struct dmfc_channel *dmfc); +int ipu_dmfc_alloc_bandwidth(struct dmfc_channel *dmfc, + unsigned long bandwidth_mbs, int burstsize); +void ipu_dmfc_free_bandwidth(struct dmfc_channel *dmfc); +int ipu_dmfc_init_channel(struct dmfc_channel *dmfc, int width); +struct dmfc_channel *ipu_dmfc_get(struct ipu_soc *ipu, int ipuv3_channel); +void ipu_dmfc_put(struct dmfc_channel *dmfc); + +/* + * IPU Display Processor (dp) functions + */ +#define IPU_DP_FLOW_SYNC_BG 0 +#define IPU_DP_FLOW_SYNC_FG 1 +#define IPU_DP_FLOW_ASYNC0_BG 2 +#define IPU_DP_FLOW_ASYNC0_FG 3 +#define IPU_DP_FLOW_ASYNC1_BG 4 +#define IPU_DP_FLOW_ASYNC1_FG 5 + +struct ipu_dp *ipu_dp_get(struct ipu_soc *ipu, unsigned int flow); +void ipu_dp_put(struct ipu_dp *); +int ipu_dp_enable(struct ipu_soc *ipu); +int ipu_dp_enable_channel(struct ipu_dp *dp); +void ipu_dp_disable_channel(struct ipu_dp *dp); +void ipu_dp_disable(struct ipu_soc *ipu); +int ipu_dp_setup_channel(struct ipu_dp *dp, + enum ipu_color_space in, enum ipu_color_space out); +int ipu_dp_set_window_pos(struct ipu_dp *, u16 x_pos, u16 y_pos); +int ipu_dp_set_global_alpha(struct ipu_dp *dp, bool enable, u8 alpha, + bool bg_chan); + +/* + * IPU CMOS Sensor Interface (csi) functions + */ +int ipu_csi_enable(struct ipu_soc *ipu, int csi); +int ipu_csi_disable(struct ipu_soc *ipu, int csi); + +/* + * IPU Sensor Multiple FIFO Controller (SMFC) functions + */ +int ipu_smfc_enable(struct ipu_soc *ipu); +int ipu_smfc_disable(struct ipu_soc *ipu); +int ipu_smfc_map_channel(struct ipu_soc *ipu, int channel, int csi_id, int mipi_id); +int ipu_smfc_set_burstsize(struct ipu_soc *ipu, int channel, int burstsize); + +#define IPU_CPMEM_WORD(word, ofs, size) ((((word) * 160 + (ofs)) << 8) | (size)) + +#define IPU_FIELD_UBO IPU_CPMEM_WORD(0, 46, 22) +#define IPU_FIELD_VBO IPU_CPMEM_WORD(0, 68, 22) +#define IPU_FIELD_IOX IPU_CPMEM_WORD(0, 90, 4) +#define IPU_FIELD_RDRW IPU_CPMEM_WORD(0, 94, 1) +#define IPU_FIELD_SO IPU_CPMEM_WORD(0, 113, 1) +#define IPU_FIELD_SLY IPU_CPMEM_WORD(1, 102, 14) +#define IPU_FIELD_SLUV IPU_CPMEM_WORD(1, 128, 14) + +#define IPU_FIELD_XV IPU_CPMEM_WORD(0, 0, 10) +#define IPU_FIELD_YV IPU_CPMEM_WORD(0, 10, 9) +#define IPU_FIELD_XB IPU_CPMEM_WORD(0, 19, 13) +#define IPU_FIELD_YB IPU_CPMEM_WORD(0, 32, 12) +#define IPU_FIELD_NSB_B IPU_CPMEM_WORD(0, 44, 1) +#define IPU_FIELD_CF IPU_CPMEM_WORD(0, 45, 1) +#define IPU_FIELD_SX IPU_CPMEM_WORD(0, 46, 12) +#define IPU_FIELD_SY IPU_CPMEM_WORD(0, 58, 11) +#define IPU_FIELD_NS IPU_CPMEM_WORD(0, 69, 10) +#define IPU_FIELD_SDX IPU_CPMEM_WORD(0, 79, 7) +#define IPU_FIELD_SM IPU_CPMEM_WORD(0, 86, 10) +#define IPU_FIELD_SCC IPU_CPMEM_WORD(0, 96, 1) +#define IPU_FIELD_SCE IPU_CPMEM_WORD(0, 97, 1) +#define IPU_FIELD_SDY IPU_CPMEM_WORD(0, 98, 7) +#define IPU_FIELD_SDRX IPU_CPMEM_WORD(0, 105, 1) +#define IPU_FIELD_SDRY IPU_CPMEM_WORD(0, 106, 1) +#define IPU_FIELD_BPP IPU_CPMEM_WORD(0, 107, 3) +#define IPU_FIELD_DEC_SEL IPU_CPMEM_WORD(0, 110, 2) +#define IPU_FIELD_DIM IPU_CPMEM_WORD(0, 112, 1) +#define IPU_FIELD_BNDM IPU_CPMEM_WORD(0, 114, 3) +#define IPU_FIELD_BM IPU_CPMEM_WORD(0, 117, 2) +#define IPU_FIELD_ROT IPU_CPMEM_WORD(0, 119, 1) +#define IPU_FIELD_HF IPU_CPMEM_WORD(0, 120, 1) +#define IPU_FIELD_VF IPU_CPMEM_WORD(0, 121, 1) +#define IPU_FIELD_THE IPU_CPMEM_WORD(0, 122, 1) +#define IPU_FIELD_CAP IPU_CPMEM_WORD(0, 123, 1) +#define IPU_FIELD_CAE IPU_CPMEM_WORD(0, 124, 1) +#define IPU_FIELD_FW IPU_CPMEM_WORD(0, 125, 13) +#define IPU_FIELD_FH IPU_CPMEM_WORD(0, 138, 12) +#define IPU_FIELD_EBA0 IPU_CPMEM_WORD(1, 0, 29) +#define IPU_FIELD_EBA1 IPU_CPMEM_WORD(1, 29, 29) +#define IPU_FIELD_ILO IPU_CPMEM_WORD(1, 58, 20) +#define IPU_FIELD_NPB IPU_CPMEM_WORD(1, 78, 7) +#define IPU_FIELD_PFS IPU_CPMEM_WORD(1, 85, 4) +#define IPU_FIELD_ALU IPU_CPMEM_WORD(1, 89, 1) +#define IPU_FIELD_ALBM IPU_CPMEM_WORD(1, 90, 3) +#define IPU_FIELD_ID IPU_CPMEM_WORD(1, 93, 2) +#define IPU_FIELD_TH IPU_CPMEM_WORD(1, 95, 7) +#define IPU_FIELD_SL IPU_CPMEM_WORD(1, 102, 14) +#define IPU_FIELD_WID0 IPU_CPMEM_WORD(1, 116, 3) +#define IPU_FIELD_WID1 IPU_CPMEM_WORD(1, 119, 3) +#define IPU_FIELD_WID2 IPU_CPMEM_WORD(1, 122, 3) +#define IPU_FIELD_WID3 IPU_CPMEM_WORD(1, 125, 3) +#define IPU_FIELD_OFS0 IPU_CPMEM_WORD(1, 128, 5) +#define IPU_FIELD_OFS1 IPU_CPMEM_WORD(1, 133, 5) +#define IPU_FIELD_OFS2 IPU_CPMEM_WORD(1, 138, 5) +#define IPU_FIELD_OFS3 IPU_CPMEM_WORD(1, 143, 5) +#define IPU_FIELD_SXYS IPU_CPMEM_WORD(1, 148, 1) +#define IPU_FIELD_CRE IPU_CPMEM_WORD(1, 149, 1) +#define IPU_FIELD_DEC_SEL2 IPU_CPMEM_WORD(1, 150, 1) + +struct ipu_cpmem_word { + u32 data[5]; + u32 res[3]; +}; + +struct ipu_ch_param { + struct ipu_cpmem_word word[2]; +}; + +void ipu_ch_param_write_field(struct ipu_ch_param __iomem *base, u32 wbs, u32 v); +u32 ipu_ch_param_read_field(struct ipu_ch_param __iomem *base, u32 wbs); +struct ipu_ch_param __iomem *ipu_get_cpmem(struct ipuv3_channel *channel); +void ipu_ch_param_dump(struct ipu_ch_param __iomem *p); + +static inline void ipu_ch_param_zero(struct ipu_ch_param __iomem *p) +{ + int i; + void __iomem *base = p; + + for (i = 0; i < sizeof(*p) / sizeof(u32); i++) + writel(0, base + i * sizeof(u32)); +} + +static inline void ipu_cpmem_set_buffer(struct ipu_ch_param __iomem *p, + int bufnum, dma_addr_t buf) +{ + if (bufnum) + ipu_ch_param_write_field(p, IPU_FIELD_EBA1, buf >> 3); + else + ipu_ch_param_write_field(p, IPU_FIELD_EBA0, buf >> 3); +} + +static inline void ipu_cpmem_set_resolution(struct ipu_ch_param __iomem *p, + int xres, int yres) +{ + ipu_ch_param_write_field(p, IPU_FIELD_FW, xres - 1); + ipu_ch_param_write_field(p, IPU_FIELD_FH, yres - 1); +} + +static inline void ipu_cpmem_set_stride(struct ipu_ch_param __iomem *p, + int stride) +{ + ipu_ch_param_write_field(p, IPU_FIELD_SLY, stride - 1); +} + +void ipu_cpmem_set_high_priority(struct ipuv3_channel *channel); + +struct ipu_rgb { + struct fb_bitfield red; + struct fb_bitfield green; + struct fb_bitfield blue; + struct fb_bitfield transp; + int bits_per_pixel; +}; + +struct ipu_image { + struct v4l2_pix_format pix; + struct v4l2_rect rect; + dma_addr_t phys; +}; + +int ipu_cpmem_set_format_passthrough(struct ipu_ch_param __iomem *p, + int width); + +int ipu_cpmem_set_format_rgb(struct ipu_ch_param __iomem *, + const struct ipu_rgb *rgb); + +static inline void ipu_cpmem_interlaced_scan(struct ipu_ch_param *p, + int stride) +{ + ipu_ch_param_write_field(p, IPU_FIELD_SO, 1); + ipu_ch_param_write_field(p, IPU_FIELD_ILO, stride / 8); + ipu_ch_param_write_field(p, IPU_FIELD_SLY, (stride * 2) - 1); +}; + +void ipu_cpmem_set_yuv_planar(struct ipu_ch_param __iomem *p, u32 pixel_format, + int stride, int height); +void ipu_cpmem_set_yuv_interleaved(struct ipu_ch_param __iomem *p, + u32 pixel_format); +void ipu_cpmem_set_yuv_planar_full(struct ipu_ch_param __iomem *p, + u32 pixel_format, int stride, int u_offset, int v_offset); +int ipu_cpmem_set_fmt(struct ipu_ch_param __iomem *cpmem, u32 pixelformat); +int ipu_cpmem_set_image(struct ipu_ch_param __iomem *cpmem, + struct ipu_image *image); + +enum ipu_color_space ipu_drm_fourcc_to_colorspace(u32 drm_fourcc); +enum ipu_color_space ipu_pixelformat_to_colorspace(u32 pixelformat); + +static inline void ipu_cpmem_set_burstsize(struct ipu_ch_param __iomem *p, + int burstsize) +{ + ipu_ch_param_write_field(p, IPU_FIELD_NPB, burstsize - 1); +}; + +struct ipu_client_platformdata { + int csi; + int di; + int dc; + int dp; + int dmfc; + int dma[2]; +}; + +#endif /* __DRM_IPU_H__ */ diff --git a/include/video/kyro.h b/include/video/kyro.h index dba7de2ee4a..c563968e926 100644 --- a/include/video/kyro.h +++ b/include/video/kyro.h @@ -32,7 +32,7 @@ struct kyrofb_info { u32 PIXCLK; /* Pixel Clock */ u32 HCLK; /* Hor Clock */ - /* Usefull to hold depth here for Linux */ + /* Useful to hold depth here for Linux */ u8 PIXDEPTH; #ifdef CONFIG_MTRR diff --git a/include/video/mach64.h b/include/video/mach64.h index a8332e528ec..89e91c0cb73 100644 --- a/include/video/mach64.h +++ b/include/video/mach64.h @@ -103,7 +103,7 @@ #define CUR_HORZ_VERT_OFF 0x0070 /* Dword offset 0_1C */ #define CUR2_HORZ_VERT_OFF 0x0070 /* Dword offset 0_1C */ -#define CONFIG_PANEL_LG 0x0074 /* Dword offset 0_1D (LG) */ +#define CNFG_PANEL_LG 0x0074 /* Dword offset 0_1D (LG) */ /* General I/O Control */ #define GP_IO 0x0078 /* Dword offset 0_1E */ @@ -146,8 +146,8 @@ #define CLOCK_SEL_CNTL 0x0090 /* Dword offset 0_24 */ /* Configuration */ -#define CONFIG_STAT1 0x0094 /* Dword offset 0_25 */ -#define CONFIG_STAT2 0x0098 /* Dword offset 0_26 */ +#define CNFG_STAT1 0x0094 /* Dword offset 0_25 */ +#define CNFG_STAT2 0x0098 /* Dword offset 0_26 */ /* Bus Control */ #define BUS_CNTL 0x00A0 /* Dword offset 0_28 */ @@ -190,9 +190,9 @@ #define POWER_MANAGEMENT_LG 0x00D8 /* Dword offset 0_36 (LG) */ /* Configuration */ -#define CONFIG_CNTL 0x00DC /* Dword offset 0_37 (CT, ET, VT) */ -#define CONFIG_CHIP_ID 0x00E0 /* Dword offset 0_38 */ -#define CONFIG_STAT0 0x00E4 /* Dword offset 0_39 */ +#define CNFG_CNTL 0x00DC /* Dword offset 0_37 (CT, ET, VT) */ +#define CNFG_CHIP_ID 0x00E0 /* Dword offset 0_38 */ +#define CNFG_STAT0 0x00E4 /* Dword offset 0_39 */ /* Test and Debug */ #define CRC_SIG 0x00E8 /* Dword offset 0_3A */ @@ -851,17 +851,17 @@ #define PLL_YCLK_CNTL 0x29 #define PM_DYN_CLK_CNTL 0x2A -/* CONFIG_CNTL register constants */ +/* CNFG_CNTL register constants */ #define APERTURE_4M_ENABLE 1 #define APERTURE_8M_ENABLE 2 #define VGA_APERTURE_ENABLE 4 -/* CONFIG_STAT0 register constants (GX, CX) */ +/* CNFG_STAT0 register constants (GX, CX) */ #define CFG_BUS_TYPE 0x00000007 #define CFG_MEM_TYPE 0x00000038 #define CFG_INIT_DAC_TYPE 0x00000e00 -/* CONFIG_STAT0 register constants (CT, ET, VT) */ +/* CNFG_STAT0 register constants (CT, ET, VT) */ #define CFG_MEM_TYPE_xT 0x00000007 #define ISA 0 @@ -942,7 +942,7 @@ #define PCI_ATI_VENDOR_ID 0x1002 -/* CONFIG_CHIP_ID register constants */ +/* CNFG_CHIP_ID register constants */ #define CFG_CHIP_TYPE 0x0000FFFF #define CFG_CHIP_CLASS 0x00FF0000 #define CFG_CHIP_REV 0xFF000000 @@ -951,7 +951,7 @@ #define CFG_CHIP_MINOR 0xC0000000 -/* Chip IDs read from CONFIG_CHIP_ID */ +/* Chip IDs read from CNFG_CHIP_ID */ /* mach64GX family */ #define GX_CHIP_ID 0xD7 /* mach64GX (ATI888GX00) */ @@ -1254,7 +1254,7 @@ #define CRTC2_DISPLAY_DIS 0x00000400 /* LCD register indices */ -#define CONFIG_PANEL 0x00 +#define CNFG_PANEL 0x00 #define LCD_GEN_CNTL 0x01 #define DSTN_CONTROL 0x02 #define HFB_PITCH_ADDR 0x03 diff --git a/include/video/metronomefb.h b/include/video/metronomefb.h new file mode 100644 index 00000000000..9863f4b6d41 --- /dev/null +++ b/include/video/metronomefb.h @@ -0,0 +1,57 @@ +/* + * metronomefb.h - definitions for the metronome framebuffer driver + * + * Copyright (C) 2008 by Jaya Kumar + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + * + */ + +#ifndef _LINUX_METRONOMEFB_H_ +#define _LINUX_METRONOMEFB_H_ + +/* command structure used by metronome controller */ +struct metromem_cmd { + u16 opcode; + u16 args[((64-2)/2)]; + u16 csum; +}; + +/* struct used by metronome. board specific stuff comes from *board */ +struct metronomefb_par { + struct metromem_cmd *metromem_cmd; + unsigned char *metromem_wfm; + unsigned char *metromem_img; + u16 *metromem_img_csum; + u16 *csum_table; + dma_addr_t metromem_dma; + struct fb_info *info; + struct metronome_board *board; + wait_queue_head_t waitq; + u8 frame_count; + int extra_size; + int dt; +}; + +/* board specific routines and data */ +struct metronome_board { + struct module *owner; /* the platform device */ + void (*set_rst)(struct metronomefb_par *, int); + void (*set_stdby)(struct metronomefb_par *, int); + void (*cleanup)(struct metronomefb_par *); + int (*met_wait_event)(struct metronomefb_par *); + int (*met_wait_event_intr)(struct metronomefb_par *); + int (*setup_irq)(struct fb_info *); + int (*setup_fb)(struct metronomefb_par *); + int (*setup_io)(struct metronomefb_par *); + int (*get_panel_type)(void); + unsigned char *metromem; + int fw; + int fh; + int wfm_size; + struct fb_info *host_fbinfo; /* the host LCD controller's fbi */ +}; + +#endif diff --git a/include/video/mipi_display.h b/include/video/mipi_display.h new file mode 100644 index 00000000000..ddcc8ca7316 --- /dev/null +++ b/include/video/mipi_display.h @@ -0,0 +1,130 @@ +/* + * Defines for Mobile Industry Processor Interface (MIPI(R)) + * Display Working Group standards: DSI, DCS, DBI, DPI + * + * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de> + * Copyright (C) 2006 Nokia Corporation + * Author: Imre Deak <imre.deak@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef MIPI_DISPLAY_H +#define MIPI_DISPLAY_H + +/* MIPI DSI Processor-to-Peripheral transaction types */ +enum { + MIPI_DSI_V_SYNC_START = 0x01, + MIPI_DSI_V_SYNC_END = 0x11, + MIPI_DSI_H_SYNC_START = 0x21, + MIPI_DSI_H_SYNC_END = 0x31, + + MIPI_DSI_COLOR_MODE_OFF = 0x02, + MIPI_DSI_COLOR_MODE_ON = 0x12, + MIPI_DSI_SHUTDOWN_PERIPHERAL = 0x22, + MIPI_DSI_TURN_ON_PERIPHERAL = 0x32, + + MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM = 0x03, + MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM = 0x13, + MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM = 0x23, + + MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM = 0x04, + MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM = 0x14, + MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM = 0x24, + + MIPI_DSI_DCS_SHORT_WRITE = 0x05, + MIPI_DSI_DCS_SHORT_WRITE_PARAM = 0x15, + + MIPI_DSI_DCS_READ = 0x06, + + MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE = 0x37, + + MIPI_DSI_END_OF_TRANSMISSION = 0x08, + + MIPI_DSI_NULL_PACKET = 0x09, + MIPI_DSI_BLANKING_PACKET = 0x19, + MIPI_DSI_GENERIC_LONG_WRITE = 0x29, + MIPI_DSI_DCS_LONG_WRITE = 0x39, + + MIPI_DSI_LOOSELY_PACKED_PIXEL_STREAM_YCBCR20 = 0x0c, + MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR24 = 0x1c, + MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16 = 0x2c, + + MIPI_DSI_PACKED_PIXEL_STREAM_30 = 0x0d, + MIPI_DSI_PACKED_PIXEL_STREAM_36 = 0x1d, + MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12 = 0x3d, + + MIPI_DSI_PACKED_PIXEL_STREAM_16 = 0x0e, + MIPI_DSI_PACKED_PIXEL_STREAM_18 = 0x1e, + MIPI_DSI_PIXEL_STREAM_3BYTE_18 = 0x2e, + MIPI_DSI_PACKED_PIXEL_STREAM_24 = 0x3e, +}; + +/* MIPI DSI Peripheral-to-Processor transaction types */ +enum { + MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT = 0x02, + MIPI_DSI_RX_END_OF_TRANSMISSION = 0x08, + MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE = 0x11, + MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE = 0x12, + MIPI_DSI_RX_GENERIC_LONG_READ_RESPONSE = 0x1a, + MIPI_DSI_RX_DCS_LONG_READ_RESPONSE = 0x1c, + MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_1BYTE = 0x21, + MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_2BYTE = 0x22, +}; + +/* MIPI DCS commands */ +enum { + MIPI_DCS_NOP = 0x00, + MIPI_DCS_SOFT_RESET = 0x01, + MIPI_DCS_GET_DISPLAY_ID = 0x04, + MIPI_DCS_GET_RED_CHANNEL = 0x06, + MIPI_DCS_GET_GREEN_CHANNEL = 0x07, + MIPI_DCS_GET_BLUE_CHANNEL = 0x08, + MIPI_DCS_GET_DISPLAY_STATUS = 0x09, + MIPI_DCS_GET_POWER_MODE = 0x0A, + MIPI_DCS_GET_ADDRESS_MODE = 0x0B, + MIPI_DCS_GET_PIXEL_FORMAT = 0x0C, + MIPI_DCS_GET_DISPLAY_MODE = 0x0D, + MIPI_DCS_GET_SIGNAL_MODE = 0x0E, + MIPI_DCS_GET_DIAGNOSTIC_RESULT = 0x0F, + MIPI_DCS_ENTER_SLEEP_MODE = 0x10, + MIPI_DCS_EXIT_SLEEP_MODE = 0x11, + MIPI_DCS_ENTER_PARTIAL_MODE = 0x12, + MIPI_DCS_ENTER_NORMAL_MODE = 0x13, + MIPI_DCS_EXIT_INVERT_MODE = 0x20, + MIPI_DCS_ENTER_INVERT_MODE = 0x21, + MIPI_DCS_SET_GAMMA_CURVE = 0x26, + MIPI_DCS_SET_DISPLAY_OFF = 0x28, + MIPI_DCS_SET_DISPLAY_ON = 0x29, + MIPI_DCS_SET_COLUMN_ADDRESS = 0x2A, + MIPI_DCS_SET_PAGE_ADDRESS = 0x2B, + MIPI_DCS_WRITE_MEMORY_START = 0x2C, + MIPI_DCS_WRITE_LUT = 0x2D, + MIPI_DCS_READ_MEMORY_START = 0x2E, + MIPI_DCS_SET_PARTIAL_AREA = 0x30, + MIPI_DCS_SET_SCROLL_AREA = 0x33, + MIPI_DCS_SET_TEAR_OFF = 0x34, + MIPI_DCS_SET_TEAR_ON = 0x35, + MIPI_DCS_SET_ADDRESS_MODE = 0x36, + MIPI_DCS_SET_SCROLL_START = 0x37, + MIPI_DCS_EXIT_IDLE_MODE = 0x38, + MIPI_DCS_ENTER_IDLE_MODE = 0x39, + MIPI_DCS_SET_PIXEL_FORMAT = 0x3A, + MIPI_DCS_WRITE_MEMORY_CONTINUE = 0x3C, + MIPI_DCS_READ_MEMORY_CONTINUE = 0x3E, + MIPI_DCS_SET_TEAR_SCANLINE = 0x44, + MIPI_DCS_GET_SCANLINE = 0x45, + MIPI_DCS_READ_DDB_START = 0xA1, + MIPI_DCS_READ_DDB_CONTINUE = 0xA8, +}; + +/* MIPI DCS pixel formats */ +#define MIPI_DCS_PIXEL_FMT_24BIT 7 +#define MIPI_DCS_PIXEL_FMT_18BIT 6 +#define MIPI_DCS_PIXEL_FMT_16BIT 5 +#define MIPI_DCS_PIXEL_FMT_12BIT 3 +#define MIPI_DCS_PIXEL_FMT_8BIT 2 +#define MIPI_DCS_PIXEL_FMT_3BIT 1 + +#endif diff --git a/include/video/mmp_disp.h b/include/video/mmp_disp.h new file mode 100644 index 00000000000..9fd9398368d --- /dev/null +++ b/include/video/mmp_disp.h @@ -0,0 +1,358 @@ +/* + * linux/include/video/mmp_disp.h + * Header file for Marvell MMP Display Controller + * + * Copyright (C) 2012 Marvell Technology Group Ltd. + * Authors: Zhou Zhu <zzhu3@marvell.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + * + */ + +#ifndef _MMP_DISP_H_ +#define _MMP_DISP_H_ +#include <linux/kthread.h> + +enum { + PIXFMT_UYVY = 0, + PIXFMT_VYUY, + PIXFMT_YUYV, + PIXFMT_YUV422P, + PIXFMT_YVU422P, + PIXFMT_YUV420P, + PIXFMT_YVU420P, + PIXFMT_RGB565 = 0x100, + PIXFMT_BGR565, + PIXFMT_RGB1555, + PIXFMT_BGR1555, + PIXFMT_RGB888PACK, + PIXFMT_BGR888PACK, + PIXFMT_RGB888UNPACK, + PIXFMT_BGR888UNPACK, + PIXFMT_RGBA888, + PIXFMT_BGRA888, + PIXFMT_RGB666, /* for output usage */ + PIXFMT_PSEUDOCOLOR = 0x200, +}; + +static inline int pixfmt_to_stride(int pix_fmt) +{ + switch (pix_fmt) { + case PIXFMT_RGB565: + case PIXFMT_BGR565: + case PIXFMT_RGB1555: + case PIXFMT_BGR1555: + case PIXFMT_UYVY: + case PIXFMT_VYUY: + case PIXFMT_YUYV: + return 2; + case PIXFMT_RGB888UNPACK: + case PIXFMT_BGR888UNPACK: + case PIXFMT_RGBA888: + case PIXFMT_BGRA888: + return 4; + case PIXFMT_RGB888PACK: + case PIXFMT_BGR888PACK: + return 3; + case PIXFMT_YUV422P: + case PIXFMT_YVU422P: + case PIXFMT_YUV420P: + case PIXFMT_YVU420P: + case PIXFMT_PSEUDOCOLOR: + return 1; + default: + return 0; + } +} + +/* parameters used by path/overlay */ +/* overlay related para: win/addr */ +struct mmp_win { + /* position/size of window */ + u16 xsrc; + u16 ysrc; + u16 xdst; + u16 ydst; + u16 xpos; + u16 ypos; + u16 left_crop; + u16 right_crop; + u16 up_crop; + u16 bottom_crop; + int pix_fmt; + /* + * pitch[0]: graphics/video layer line length or y pitch + * pitch[1]/pitch[2]: video u/v pitch if non-zero + */ + u32 pitch[3]; +}; + +struct mmp_addr { + /* phys address */ + u32 phys[6]; +}; + +/* path related para: mode */ +struct mmp_mode { + const char *name; + u32 refresh; + u32 xres; + u32 yres; + u32 left_margin; + u32 right_margin; + u32 upper_margin; + u32 lower_margin; + u32 hsync_len; + u32 vsync_len; + u32 hsync_invert; + u32 vsync_invert; + u32 invert_pixclock; + u32 pixclock_freq; + int pix_fmt_out; +}; + +/* main structures */ +struct mmp_path; +struct mmp_overlay; +struct mmp_panel; + +/* status types */ +enum { + MMP_OFF = 0, + MMP_ON, +}; + +static inline const char *stat_name(int stat) +{ + switch (stat) { + case MMP_OFF: + return "OFF"; + case MMP_ON: + return "ON"; + default: + return "UNKNOWNSTAT"; + } +} + +struct mmp_overlay_ops { + /* should be provided by driver */ + void (*set_fetch)(struct mmp_overlay *overlay, int fetch_id); + void (*set_onoff)(struct mmp_overlay *overlay, int status); + void (*set_win)(struct mmp_overlay *overlay, struct mmp_win *win); + int (*set_addr)(struct mmp_overlay *overlay, struct mmp_addr *addr); +}; + +/* overlay describes a z-order indexed slot in each path. */ +struct mmp_overlay { + int id; + const char *name; + struct mmp_path *path; + + /* overlay info: private data */ + int dmafetch_id; + struct mmp_addr addr; + struct mmp_win win; + + /* state */ + int open_count; + int status; + struct mutex access_ok; + + struct mmp_overlay_ops *ops; +}; + +/* panel type */ +enum { + PANELTYPE_ACTIVE = 0, + PANELTYPE_SMART, + PANELTYPE_TV, + PANELTYPE_DSI_CMD, + PANELTYPE_DSI_VIDEO, +}; + +struct mmp_panel { + /* use node to register to list */ + struct list_head node; + const char *name; + /* path name used to connect to proper path configed */ + const char *plat_path_name; + struct device *dev; + int panel_type; + void *plat_data; + int (*get_modelist)(struct mmp_panel *panel, + struct mmp_mode **modelist); + void (*set_mode)(struct mmp_panel *panel, + struct mmp_mode *mode); + void (*set_onoff)(struct mmp_panel *panel, + int status); +}; + +struct mmp_path_ops { + int (*check_status)(struct mmp_path *path); + struct mmp_overlay *(*get_overlay)(struct mmp_path *path, + int overlay_id); + int (*get_modelist)(struct mmp_path *path, + struct mmp_mode **modelist); + + /* follow ops should be provided by driver */ + void (*set_mode)(struct mmp_path *path, struct mmp_mode *mode); + void (*set_onoff)(struct mmp_path *path, int status); + /* todo: add query */ +}; + +/* path output types */ +enum { + PATH_OUT_PARALLEL, + PATH_OUT_DSI, + PATH_OUT_HDMI, +}; + +/* path is main part of mmp-disp */ +struct mmp_path { + /* use node to register to list */ + struct list_head node; + + /* init data */ + struct device *dev; + + int id; + const char *name; + int output_type; + struct mmp_panel *panel; + void *plat_data; + + /* dynamic use */ + struct mmp_mode mode; + + /* state */ + int open_count; + int status; + struct mutex access_ok; + + struct mmp_path_ops ops; + + /* layers */ + int overlay_num; + struct mmp_overlay overlays[0]; +}; + +extern struct mmp_path *mmp_get_path(const char *name); +static inline void mmp_path_set_mode(struct mmp_path *path, + struct mmp_mode *mode) +{ + if (path) + path->ops.set_mode(path, mode); +} +static inline void mmp_path_set_onoff(struct mmp_path *path, int status) +{ + if (path) + path->ops.set_onoff(path, status); +} +static inline int mmp_path_get_modelist(struct mmp_path *path, + struct mmp_mode **modelist) +{ + if (path) + return path->ops.get_modelist(path, modelist); + return 0; +} +static inline struct mmp_overlay *mmp_path_get_overlay( + struct mmp_path *path, int overlay_id) +{ + if (path) + return path->ops.get_overlay(path, overlay_id); + return NULL; +} +static inline void mmp_overlay_set_fetch(struct mmp_overlay *overlay, + int fetch_id) +{ + if (overlay) + overlay->ops->set_fetch(overlay, fetch_id); +} +static inline void mmp_overlay_set_onoff(struct mmp_overlay *overlay, + int status) +{ + if (overlay) + overlay->ops->set_onoff(overlay, status); +} +static inline void mmp_overlay_set_win(struct mmp_overlay *overlay, + struct mmp_win *win) +{ + if (overlay) + overlay->ops->set_win(overlay, win); +} +static inline int mmp_overlay_set_addr(struct mmp_overlay *overlay, + struct mmp_addr *addr) +{ + if (overlay) + return overlay->ops->set_addr(overlay, addr); + return 0; +} + +/* + * driver data is set from each detailed ctrl driver for path usage + * it defined a common interface that plat driver need to implement + */ +struct mmp_path_info { + /* driver data, set when registed*/ + const char *name; + struct device *dev; + int id; + int output_type; + int overlay_num; + void (*set_mode)(struct mmp_path *path, struct mmp_mode *mode); + void (*set_onoff)(struct mmp_path *path, int status); + struct mmp_overlay_ops *overlay_ops; + void *plat_data; +}; + +extern struct mmp_path *mmp_register_path( + struct mmp_path_info *info); +extern void mmp_unregister_path(struct mmp_path *path); +extern void mmp_register_panel(struct mmp_panel *panel); +extern void mmp_unregister_panel(struct mmp_panel *panel); + +/* defintions for platform data */ +/* interface for buffer driver */ +struct mmp_buffer_driver_mach_info { + const char *name; + const char *path_name; + int overlay_id; + int dmafetch_id; + int default_pixfmt; +}; + +/* interface for controllers driver */ +struct mmp_mach_path_config { + const char *name; + int overlay_num; + int output_type; + u32 path_config; + u32 link_config; + u32 dsi_rbswap; +}; + +struct mmp_mach_plat_info { + const char *name; + const char *clk_name; + int path_num; + struct mmp_mach_path_config *paths; +}; + +/* interface for panel drivers */ +struct mmp_mach_panel_info { + const char *name; + void (*plat_set_onoff)(int status); + const char *plat_path_name; +}; +#endif /* _MMP_DISP_H_ */ diff --git a/include/video/neomagic.h b/include/video/neomagic.h index a9e118a1cd1..bc5013e8059 100644 --- a/include/video/neomagic.h +++ b/include/video/neomagic.h @@ -90,23 +90,6 @@ #define PCI_CHIP_NM2360 0x0006 #define PCI_CHIP_NM2380 0x0016 - -struct xtimings { - unsigned int pixclock; - unsigned int HDisplay; - unsigned int HSyncStart; - unsigned int HSyncEnd; - unsigned int HTotal; - unsigned int VDisplay; - unsigned int VSyncStart; - unsigned int VSyncEnd; - unsigned int VTotal; - unsigned int sync; - int dblscan; - int interlaced; -}; - - /* --------------------------------------------------------------------- */ typedef volatile struct { @@ -140,14 +123,13 @@ typedef volatile struct { struct neofb_par { struct vgastate state; - struct mutex open_lock; unsigned int ref_count; unsigned char MiscOutReg; /* Misc */ unsigned char CRTC[25]; /* Crtc Controller */ unsigned char Sequencer[5]; /* Video Sequencer */ unsigned char Graphics[9]; /* Video Graphics */ - unsigned char Attribute[21]; /* Video Atribute */ + unsigned char Attribute[21]; /* Video Attribute */ unsigned char GeneralLockReg; unsigned char ExtCRTDispAddr; diff --git a/include/video/newport.h b/include/video/newport.h index 1f5ebeaa818..de980a3b60c 100644 --- a/include/video/newport.h +++ b/include/video/newport.h @@ -3,9 +3,9 @@ * newport.h: Defines and register layout for NEWPORT graphics * hardware. * - * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) + * Copyright (C) 1996 David S. Miller (davem@davemloft.net) * - * Ulf Carlsson - Compability with the IRIX structures added + * Ulf Carlsson - Compatibility with the IRIX structures added */ #ifndef _SGI_NEWPORT_H @@ -453,7 +453,7 @@ static __inline__ int newport_wait(struct newport_regs *regs) { int t = BUSY_TIMEOUT; - while (t--) + while (--t) if (!(regs->cset.status & NPORT_STAT_GBUSY)) break; return !t; @@ -463,7 +463,7 @@ static __inline__ int newport_bfwait(struct newport_regs *regs) { int t = BUSY_TIMEOUT; - while (t--) + while (--t) if(!(regs->cset.status & NPORT_STAT_BBUSY)) break; return !t; diff --git a/include/video/of_display_timing.h b/include/video/of_display_timing.h new file mode 100644 index 00000000000..79e6697af6c --- /dev/null +++ b/include/video/of_display_timing.h @@ -0,0 +1,23 @@ +/* + * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de> + * + * display timings of helpers + * + * This file is released under the GPLv2 + */ + +#ifndef __LINUX_OF_DISPLAY_TIMING_H +#define __LINUX_OF_DISPLAY_TIMING_H + +struct device_node; +struct display_timing; +struct display_timings; + +#define OF_USE_NATIVE_MODE -1 + +int of_get_display_timing(struct device_node *np, const char *name, + struct display_timing *dt); +struct display_timings *of_get_display_timings(struct device_node *np); +int of_display_timings_exist(struct device_node *np); + +#endif diff --git a/include/video/of_videomode.h b/include/video/of_videomode.h new file mode 100644 index 00000000000..a07efcc5142 --- /dev/null +++ b/include/video/of_videomode.h @@ -0,0 +1,18 @@ +/* + * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de> + * + * videomode of-helpers + * + * This file is released under the GPLv2 + */ + +#ifndef __LINUX_OF_VIDEOMODE_H +#define __LINUX_OF_VIDEOMODE_H + +struct device_node; +struct videomode; + +int of_get_videomode(struct device_node *np, struct videomode *vm, + int index); + +#endif /* __LINUX_OF_VIDEOMODE_H */ diff --git a/include/video/omap-panel-data.h b/include/video/omap-panel-data.h new file mode 100644 index 00000000000..69279c013ac --- /dev/null +++ b/include/video/omap-panel-data.h @@ -0,0 +1,254 @@ +/* + * Header containing platform_data structs for omap panels + * + * Copyright (C) 2013 Texas Instruments + * Author: Tomi Valkeinen <tomi.valkeinen@ti.com> + * Archit Taneja <archit@ti.com> + * + * Copyright (C) 2011 Texas Instruments + * Author: Mayuresh Janorkar <mayur@ti.com> + * + * Copyright (C) 2010 Canonical Ltd. + * Author: Bryan Wu <bryan.wu@canonical.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __OMAP_PANEL_DATA_H +#define __OMAP_PANEL_DATA_H + +#include <video/omapdss.h> +#include <video/display_timing.h> + +struct omap_dss_device; + +/** + * encoder_tfp410 platform data + * @name: name for this display entity + * @power_down_gpio: gpio number for PD pin (or -1 if not available) + * @data_lines: number of DPI datalines + */ +struct encoder_tfp410_platform_data { + const char *name; + const char *source; + int power_down_gpio; + int data_lines; +}; + +/** + * encoder_tpd12s015 platform data + * @name: name for this display entity + * @ct_cp_hpd_gpio: CT_CP_HPD gpio number + * @ls_oe_gpio: LS_OE gpio number + * @hpd_gpio: HPD gpio number + */ +struct encoder_tpd12s015_platform_data { + const char *name; + const char *source; + + int ct_cp_hpd_gpio; + int ls_oe_gpio; + int hpd_gpio; +}; + +/** + * connector_dvi platform data + * @name: name for this display entity + * @source: name of the display entity used as a video source + * @i2c_bus_num: i2c bus number to be used for reading EDID + */ +struct connector_dvi_platform_data { + const char *name; + const char *source; + int i2c_bus_num; +}; + +/** + * connector_hdmi platform data + * @name: name for this display entity + * @source: name of the display entity used as a video source + */ +struct connector_hdmi_platform_data { + const char *name; + const char *source; +}; + +/** + * connector_atv platform data + * @name: name for this display entity + * @source: name of the display entity used as a video source + * @connector_type: composite/svideo + * @invert_polarity: invert signal polarity + */ +struct connector_atv_platform_data { + const char *name; + const char *source; + + enum omap_dss_venc_type connector_type; + bool invert_polarity; +}; + +/** + * panel_dpi platform data + * @name: name for this display entity + * @source: name of the display entity used as a video source + * @data_lines: number of DPI datalines + * @display_timing: timings for this panel + * @backlight_gpio: gpio to enable/disable the backlight (or -1) + * @enable_gpio: gpio to enable/disable the panel (or -1) + */ +struct panel_dpi_platform_data { + const char *name; + const char *source; + + int data_lines; + + const struct display_timing *display_timing; + + int backlight_gpio; + int enable_gpio; +}; + +/** + * panel_dsicm platform data + * @name: name for this display entity + * @source: name of the display entity used as a video source + * @reset_gpio: gpio to reset the panel (or -1) + * @use_ext_te: use external TE GPIO + * @ext_te_gpio: external TE GPIO + * @ulps_timeout: time to wait before entering ULPS, 0 = disabled (ms) + * @use_dsi_backlight: true if panel uses DSI command to control backlight + * @pin_config: DSI pin configuration + */ +struct panel_dsicm_platform_data { + const char *name; + const char *source; + + int reset_gpio; + + bool use_ext_te; + int ext_te_gpio; + + unsigned ulps_timeout; + + bool use_dsi_backlight; + + struct omap_dsi_pin_config pin_config; +}; + +/** + * panel_acx565akm platform data + * @name: name for this display entity + * @source: name of the display entity used as a video source + * @reset_gpio: gpio to reset the panel (or -1) + * @datapairs: number of SDI datapairs + */ +struct panel_acx565akm_platform_data { + const char *name; + const char *source; + + int reset_gpio; + + int datapairs; +}; + +/** + * panel_lb035q02 platform data + * @name: name for this display entity + * @source: name of the display entity used as a video source + * @data_lines: number of DPI datalines + * @backlight_gpio: gpio to enable/disable the backlight (or -1) + * @enable_gpio: gpio to enable/disable the panel (or -1) + */ +struct panel_lb035q02_platform_data { + const char *name; + const char *source; + + int data_lines; + + int backlight_gpio; + int enable_gpio; +}; + +/** + * panel_sharp_ls037v7dw01 platform data + * @name: name for this display entity + * @source: name of the display entity used as a video source + * @data_lines: number of DPI datalines + * @resb_gpio: reset signal GPIO + * @ini_gpio: power on control GPIO + * @mo_gpio: selection for resolution(VGA/QVGA) GPIO + * @lr_gpio: selection for horizontal scanning direction GPIO + * @ud_gpio: selection for vertical scanning direction GPIO + */ +struct panel_sharp_ls037v7dw01_platform_data { + const char *name; + const char *source; + + int data_lines; + + int resb_gpio; + int ini_gpio; + int mo_gpio; + int lr_gpio; + int ud_gpio; +}; + +/** + * panel-tpo-td043mtea1 platform data + * @name: name for this display entity + * @source: name of the display entity used as a video source + * @data_lines: number of DPI datalines + * @nreset_gpio: reset signal + */ +struct panel_tpo_td043mtea1_platform_data { + const char *name; + const char *source; + + int data_lines; + + int nreset_gpio; +}; + +/** + * panel-nec-nl8048hl11 platform data + * @name: name for this display entity + * @source: name of the display entity used as a video source + * @data_lines: number of DPI datalines + * @res_gpio: reset signal + * @qvga_gpio: selection for resolution(QVGA/WVGA) + */ +struct panel_nec_nl8048hl11_platform_data { + const char *name; + const char *source; + + int data_lines; + + int res_gpio; + int qvga_gpio; +}; + +/** + * panel-tpo-td028ttec1 platform data + * @name: name for display entity + * @source: name of the display entity used as a video source + * @data_lines: number of DPI datalines + */ +struct panel_tpo_td028ttec1_platform_data { + const char *name; + const char *source; + + int data_lines; +}; + +#endif /* __OMAP_PANEL_DATA_H */ diff --git a/include/video/omapdss.h b/include/video/omapdss.h new file mode 100644 index 00000000000..fc06c5b5f12 --- /dev/null +++ b/include/video/omapdss.h @@ -0,0 +1,1033 @@ +/* + * Copyright (C) 2008 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __OMAP_OMAPDSS_H +#define __OMAP_OMAPDSS_H + +#include <linux/list.h> +#include <linux/kobject.h> +#include <linux/device.h> +#include <linux/interrupt.h> + +#include <video/videomode.h> + +#define DISPC_IRQ_FRAMEDONE (1 << 0) +#define DISPC_IRQ_VSYNC (1 << 1) +#define DISPC_IRQ_EVSYNC_EVEN (1 << 2) +#define DISPC_IRQ_EVSYNC_ODD (1 << 3) +#define DISPC_IRQ_ACBIAS_COUNT_STAT (1 << 4) +#define DISPC_IRQ_PROG_LINE_NUM (1 << 5) +#define DISPC_IRQ_GFX_FIFO_UNDERFLOW (1 << 6) +#define DISPC_IRQ_GFX_END_WIN (1 << 7) +#define DISPC_IRQ_PAL_GAMMA_MASK (1 << 8) +#define DISPC_IRQ_OCP_ERR (1 << 9) +#define DISPC_IRQ_VID1_FIFO_UNDERFLOW (1 << 10) +#define DISPC_IRQ_VID1_END_WIN (1 << 11) +#define DISPC_IRQ_VID2_FIFO_UNDERFLOW (1 << 12) +#define DISPC_IRQ_VID2_END_WIN (1 << 13) +#define DISPC_IRQ_SYNC_LOST (1 << 14) +#define DISPC_IRQ_SYNC_LOST_DIGIT (1 << 15) +#define DISPC_IRQ_WAKEUP (1 << 16) +#define DISPC_IRQ_SYNC_LOST2 (1 << 17) +#define DISPC_IRQ_VSYNC2 (1 << 18) +#define DISPC_IRQ_VID3_END_WIN (1 << 19) +#define DISPC_IRQ_VID3_FIFO_UNDERFLOW (1 << 20) +#define DISPC_IRQ_ACBIAS_COUNT_STAT2 (1 << 21) +#define DISPC_IRQ_FRAMEDONE2 (1 << 22) +#define DISPC_IRQ_FRAMEDONEWB (1 << 23) +#define DISPC_IRQ_FRAMEDONETV (1 << 24) +#define DISPC_IRQ_WBBUFFEROVERFLOW (1 << 25) +#define DISPC_IRQ_SYNC_LOST3 (1 << 27) +#define DISPC_IRQ_VSYNC3 (1 << 28) +#define DISPC_IRQ_ACBIAS_COUNT_STAT3 (1 << 29) +#define DISPC_IRQ_FRAMEDONE3 (1 << 30) + +struct omap_dss_device; +struct omap_overlay_manager; +struct dss_lcd_mgr_config; +struct snd_aes_iec958; +struct snd_cea_861_aud_if; + +enum omap_display_type { + OMAP_DISPLAY_TYPE_NONE = 0, + OMAP_DISPLAY_TYPE_DPI = 1 << 0, + OMAP_DISPLAY_TYPE_DBI = 1 << 1, + OMAP_DISPLAY_TYPE_SDI = 1 << 2, + OMAP_DISPLAY_TYPE_DSI = 1 << 3, + OMAP_DISPLAY_TYPE_VENC = 1 << 4, + OMAP_DISPLAY_TYPE_HDMI = 1 << 5, + OMAP_DISPLAY_TYPE_DVI = 1 << 6, +}; + +enum omap_plane { + OMAP_DSS_GFX = 0, + OMAP_DSS_VIDEO1 = 1, + OMAP_DSS_VIDEO2 = 2, + OMAP_DSS_VIDEO3 = 3, + OMAP_DSS_WB = 4, +}; + +enum omap_channel { + OMAP_DSS_CHANNEL_LCD = 0, + OMAP_DSS_CHANNEL_DIGIT = 1, + OMAP_DSS_CHANNEL_LCD2 = 2, + OMAP_DSS_CHANNEL_LCD3 = 3, +}; + +enum omap_color_mode { + OMAP_DSS_COLOR_CLUT1 = 1 << 0, /* BITMAP 1 */ + OMAP_DSS_COLOR_CLUT2 = 1 << 1, /* BITMAP 2 */ + OMAP_DSS_COLOR_CLUT4 = 1 << 2, /* BITMAP 4 */ + OMAP_DSS_COLOR_CLUT8 = 1 << 3, /* BITMAP 8 */ + OMAP_DSS_COLOR_RGB12U = 1 << 4, /* RGB12, 16-bit container */ + OMAP_DSS_COLOR_ARGB16 = 1 << 5, /* ARGB16 */ + OMAP_DSS_COLOR_RGB16 = 1 << 6, /* RGB16 */ + OMAP_DSS_COLOR_RGB24U = 1 << 7, /* RGB24, 32-bit container */ + OMAP_DSS_COLOR_RGB24P = 1 << 8, /* RGB24, 24-bit container */ + OMAP_DSS_COLOR_YUV2 = 1 << 9, /* YUV2 4:2:2 co-sited */ + OMAP_DSS_COLOR_UYVY = 1 << 10, /* UYVY 4:2:2 co-sited */ + OMAP_DSS_COLOR_ARGB32 = 1 << 11, /* ARGB32 */ + OMAP_DSS_COLOR_RGBA32 = 1 << 12, /* RGBA32 */ + OMAP_DSS_COLOR_RGBX32 = 1 << 13, /* RGBx32 */ + OMAP_DSS_COLOR_NV12 = 1 << 14, /* NV12 format: YUV 4:2:0 */ + OMAP_DSS_COLOR_RGBA16 = 1 << 15, /* RGBA16 - 4444 */ + OMAP_DSS_COLOR_RGBX16 = 1 << 16, /* RGBx16 - 4444 */ + OMAP_DSS_COLOR_ARGB16_1555 = 1 << 17, /* ARGB16 - 1555 */ + OMAP_DSS_COLOR_XRGB16_1555 = 1 << 18, /* xRGB16 - 1555 */ +}; + +enum omap_dss_load_mode { + OMAP_DSS_LOAD_CLUT_AND_FRAME = 0, + OMAP_DSS_LOAD_CLUT_ONLY = 1, + OMAP_DSS_LOAD_FRAME_ONLY = 2, + OMAP_DSS_LOAD_CLUT_ONCE_FRAME = 3, +}; + +enum omap_dss_trans_key_type { + OMAP_DSS_COLOR_KEY_GFX_DST = 0, + OMAP_DSS_COLOR_KEY_VID_SRC = 1, +}; + +enum omap_rfbi_te_mode { + OMAP_DSS_RFBI_TE_MODE_1 = 1, + OMAP_DSS_RFBI_TE_MODE_2 = 2, +}; + +enum omap_dss_signal_level { + OMAPDSS_SIG_ACTIVE_HIGH = 0, + OMAPDSS_SIG_ACTIVE_LOW = 1, +}; + +enum omap_dss_signal_edge { + OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES, + OMAPDSS_DRIVE_SIG_RISING_EDGE, + OMAPDSS_DRIVE_SIG_FALLING_EDGE, +}; + +enum omap_dss_venc_type { + OMAP_DSS_VENC_TYPE_COMPOSITE, + OMAP_DSS_VENC_TYPE_SVIDEO, +}; + +enum omap_dss_dsi_pixel_format { + OMAP_DSS_DSI_FMT_RGB888, + OMAP_DSS_DSI_FMT_RGB666, + OMAP_DSS_DSI_FMT_RGB666_PACKED, + OMAP_DSS_DSI_FMT_RGB565, +}; + +enum omap_dss_dsi_mode { + OMAP_DSS_DSI_CMD_MODE = 0, + OMAP_DSS_DSI_VIDEO_MODE, +}; + +enum omap_display_caps { + OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE = 1 << 0, + OMAP_DSS_DISPLAY_CAP_TEAR_ELIM = 1 << 1, +}; + +enum omap_dss_display_state { + OMAP_DSS_DISPLAY_DISABLED = 0, + OMAP_DSS_DISPLAY_ACTIVE, +}; + +enum omap_dss_audio_state { + OMAP_DSS_AUDIO_DISABLED = 0, + OMAP_DSS_AUDIO_ENABLED, + OMAP_DSS_AUDIO_CONFIGURED, + OMAP_DSS_AUDIO_PLAYING, +}; + +struct omap_dss_audio { + struct snd_aes_iec958 *iec; + struct snd_cea_861_aud_if *cea; +}; + +enum omap_dss_rotation_type { + OMAP_DSS_ROT_DMA = 1 << 0, + OMAP_DSS_ROT_VRFB = 1 << 1, + OMAP_DSS_ROT_TILER = 1 << 2, +}; + +/* clockwise rotation angle */ +enum omap_dss_rotation_angle { + OMAP_DSS_ROT_0 = 0, + OMAP_DSS_ROT_90 = 1, + OMAP_DSS_ROT_180 = 2, + OMAP_DSS_ROT_270 = 3, +}; + +enum omap_overlay_caps { + OMAP_DSS_OVL_CAP_SCALE = 1 << 0, + OMAP_DSS_OVL_CAP_GLOBAL_ALPHA = 1 << 1, + OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA = 1 << 2, + OMAP_DSS_OVL_CAP_ZORDER = 1 << 3, + OMAP_DSS_OVL_CAP_POS = 1 << 4, + OMAP_DSS_OVL_CAP_REPLICATION = 1 << 5, +}; + +enum omap_overlay_manager_caps { + OMAP_DSS_DUMMY_VALUE, /* add a dummy value to prevent compiler error */ +}; + +enum omap_dss_clk_source { + OMAP_DSS_CLK_SRC_FCK = 0, /* OMAP2/3: DSS1_ALWON_FCLK + * OMAP4: DSS_FCLK */ + OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC, /* OMAP3: DSI1_PLL_FCLK + * OMAP4: PLL1_CLK1 */ + OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI, /* OMAP3: DSI2_PLL_FCLK + * OMAP4: PLL1_CLK2 */ + OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC, /* OMAP4: PLL2_CLK1 */ + OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DSI, /* OMAP4: PLL2_CLK2 */ +}; + +enum omap_hdmi_flags { + OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP = 1 << 0, +}; + +enum omap_dss_output_id { + OMAP_DSS_OUTPUT_DPI = 1 << 0, + OMAP_DSS_OUTPUT_DBI = 1 << 1, + OMAP_DSS_OUTPUT_SDI = 1 << 2, + OMAP_DSS_OUTPUT_DSI1 = 1 << 3, + OMAP_DSS_OUTPUT_DSI2 = 1 << 4, + OMAP_DSS_OUTPUT_VENC = 1 << 5, + OMAP_DSS_OUTPUT_HDMI = 1 << 6, +}; + +/* RFBI */ + +struct rfbi_timings { + int cs_on_time; + int cs_off_time; + int we_on_time; + int we_off_time; + int re_on_time; + int re_off_time; + int we_cycle_time; + int re_cycle_time; + int cs_pulse_width; + int access_time; + + int clk_div; + + u32 tim[5]; /* set by rfbi_convert_timings() */ + + int converted; +}; + +/* DSI */ + +enum omap_dss_dsi_trans_mode { + /* Sync Pulses: both sync start and end packets sent */ + OMAP_DSS_DSI_PULSE_MODE, + /* Sync Events: only sync start packets sent */ + OMAP_DSS_DSI_EVENT_MODE, + /* Burst: only sync start packets sent, pixels are time compressed */ + OMAP_DSS_DSI_BURST_MODE, +}; + +struct omap_dss_dsi_videomode_timings { + unsigned long hsclk; + + unsigned ndl; + unsigned bitspp; + + /* pixels */ + u16 hact; + /* lines */ + u16 vact; + + /* DSI video mode blanking data */ + /* Unit: byte clock cycles */ + u16 hss; + u16 hsa; + u16 hse; + u16 hfp; + u16 hbp; + /* Unit: line clocks */ + u16 vsa; + u16 vfp; + u16 vbp; + + /* DSI blanking modes */ + int blanking_mode; + int hsa_blanking_mode; + int hbp_blanking_mode; + int hfp_blanking_mode; + + enum omap_dss_dsi_trans_mode trans_mode; + + bool ddr_clk_always_on; + int window_sync; +}; + +struct omap_dss_dsi_config { + enum omap_dss_dsi_mode mode; + enum omap_dss_dsi_pixel_format pixel_format; + const struct omap_video_timings *timings; + + unsigned long hs_clk_min, hs_clk_max; + unsigned long lp_clk_min, lp_clk_max; + + bool ddr_clk_always_on; + enum omap_dss_dsi_trans_mode trans_mode; +}; + +enum omapdss_version { + OMAPDSS_VER_UNKNOWN = 0, + OMAPDSS_VER_OMAP24xx, + OMAPDSS_VER_OMAP34xx_ES1, /* OMAP3430 ES1.0, 2.0 */ + OMAPDSS_VER_OMAP34xx_ES3, /* OMAP3430 ES3.0+ */ + OMAPDSS_VER_OMAP3630, + OMAPDSS_VER_AM35xx, + OMAPDSS_VER_OMAP4430_ES1, /* OMAP4430 ES1.0 */ + OMAPDSS_VER_OMAP4430_ES2, /* OMAP4430 ES2.0, 2.1, 2.2 */ + OMAPDSS_VER_OMAP4, /* All other OMAP4s */ + OMAPDSS_VER_OMAP5, + OMAPDSS_VER_AM43xx, +}; + +/* Board specific data */ +struct omap_dss_board_info { + int num_devices; + struct omap_dss_device **devices; + struct omap_dss_device *default_device; + const char *default_display_name; + int (*dsi_enable_pads)(int dsi_id, unsigned lane_mask); + void (*dsi_disable_pads)(int dsi_id, unsigned lane_mask); + int (*set_min_bus_tput)(struct device *dev, unsigned long r); + enum omapdss_version version; +}; + +/* Init with the board info */ +extern int omap_display_init(struct omap_dss_board_info *board_data); +/* HDMI mux init*/ +extern int omap_hdmi_init(enum omap_hdmi_flags flags); + +struct omap_video_timings { + /* Unit: pixels */ + u16 x_res; + /* Unit: pixels */ + u16 y_res; + /* Unit: Hz */ + u32 pixelclock; + /* Unit: pixel clocks */ + u16 hsw; /* Horizontal synchronization pulse width */ + /* Unit: pixel clocks */ + u16 hfp; /* Horizontal front porch */ + /* Unit: pixel clocks */ + u16 hbp; /* Horizontal back porch */ + /* Unit: line clocks */ + u16 vsw; /* Vertical synchronization pulse width */ + /* Unit: line clocks */ + u16 vfp; /* Vertical front porch */ + /* Unit: line clocks */ + u16 vbp; /* Vertical back porch */ + + /* Vsync logic level */ + enum omap_dss_signal_level vsync_level; + /* Hsync logic level */ + enum omap_dss_signal_level hsync_level; + /* Interlaced or Progressive timings */ + bool interlace; + /* Pixel clock edge to drive LCD data */ + enum omap_dss_signal_edge data_pclk_edge; + /* Data enable logic level */ + enum omap_dss_signal_level de_level; + /* Pixel clock edges to drive HSYNC and VSYNC signals */ + enum omap_dss_signal_edge sync_pclk_edge; +}; + +#ifdef CONFIG_OMAP2_DSS_VENC +/* Hardcoded timings for tv modes. Venc only uses these to + * identify the mode, and does not actually use the configs + * itself. However, the configs should be something that + * a normal monitor can also show */ +extern const struct omap_video_timings omap_dss_pal_timings; +extern const struct omap_video_timings omap_dss_ntsc_timings; +#endif + +struct omap_dss_cpr_coefs { + s16 rr, rg, rb; + s16 gr, gg, gb; + s16 br, bg, bb; +}; + +struct omap_overlay_info { + dma_addr_t paddr; + dma_addr_t p_uv_addr; /* for NV12 format */ + u16 screen_width; + u16 width; + u16 height; + enum omap_color_mode color_mode; + u8 rotation; + enum omap_dss_rotation_type rotation_type; + bool mirror; + + u16 pos_x; + u16 pos_y; + u16 out_width; /* if 0, out_width == width */ + u16 out_height; /* if 0, out_height == height */ + u8 global_alpha; + u8 pre_mult_alpha; + u8 zorder; +}; + +struct omap_overlay { + struct kobject kobj; + struct list_head list; + + /* static fields */ + const char *name; + enum omap_plane id; + enum omap_color_mode supported_modes; + enum omap_overlay_caps caps; + + /* dynamic fields */ + struct omap_overlay_manager *manager; + + /* + * The following functions do not block: + * + * is_enabled + * set_overlay_info + * get_overlay_info + * + * The rest of the functions may block and cannot be called from + * interrupt context + */ + + int (*enable)(struct omap_overlay *ovl); + int (*disable)(struct omap_overlay *ovl); + bool (*is_enabled)(struct omap_overlay *ovl); + + int (*set_manager)(struct omap_overlay *ovl, + struct omap_overlay_manager *mgr); + int (*unset_manager)(struct omap_overlay *ovl); + + int (*set_overlay_info)(struct omap_overlay *ovl, + struct omap_overlay_info *info); + void (*get_overlay_info)(struct omap_overlay *ovl, + struct omap_overlay_info *info); + + int (*wait_for_go)(struct omap_overlay *ovl); + + struct omap_dss_device *(*get_device)(struct omap_overlay *ovl); +}; + +struct omap_overlay_manager_info { + u32 default_color; + + enum omap_dss_trans_key_type trans_key_type; + u32 trans_key; + bool trans_enabled; + + bool partial_alpha_enabled; + + bool cpr_enable; + struct omap_dss_cpr_coefs cpr_coefs; +}; + +struct omap_overlay_manager { + struct kobject kobj; + + /* static fields */ + const char *name; + enum omap_channel id; + enum omap_overlay_manager_caps caps; + struct list_head overlays; + enum omap_display_type supported_displays; + enum omap_dss_output_id supported_outputs; + + /* dynamic fields */ + struct omap_dss_device *output; + + /* + * The following functions do not block: + * + * set_manager_info + * get_manager_info + * apply + * + * The rest of the functions may block and cannot be called from + * interrupt context + */ + + int (*set_output)(struct omap_overlay_manager *mgr, + struct omap_dss_device *output); + int (*unset_output)(struct omap_overlay_manager *mgr); + + int (*set_manager_info)(struct omap_overlay_manager *mgr, + struct omap_overlay_manager_info *info); + void (*get_manager_info)(struct omap_overlay_manager *mgr, + struct omap_overlay_manager_info *info); + + int (*apply)(struct omap_overlay_manager *mgr); + int (*wait_for_go)(struct omap_overlay_manager *mgr); + int (*wait_for_vsync)(struct omap_overlay_manager *mgr); + + struct omap_dss_device *(*get_device)(struct omap_overlay_manager *mgr); +}; + +/* 22 pins means 1 clk lane and 10 data lanes */ +#define OMAP_DSS_MAX_DSI_PINS 22 + +struct omap_dsi_pin_config { + int num_pins; + /* + * pin numbers in the following order: + * clk+, clk- + * data1+, data1- + * data2+, data2- + * ... + */ + int pins[OMAP_DSS_MAX_DSI_PINS]; +}; + +struct omap_dss_writeback_info { + u32 paddr; + u32 p_uv_addr; + u16 buf_width; + u16 width; + u16 height; + enum omap_color_mode color_mode; + u8 rotation; + enum omap_dss_rotation_type rotation_type; + bool mirror; + u8 pre_mult_alpha; +}; + +struct omapdss_dpi_ops { + int (*connect)(struct omap_dss_device *dssdev, + struct omap_dss_device *dst); + void (*disconnect)(struct omap_dss_device *dssdev, + struct omap_dss_device *dst); + + int (*enable)(struct omap_dss_device *dssdev); + void (*disable)(struct omap_dss_device *dssdev); + + int (*check_timings)(struct omap_dss_device *dssdev, + struct omap_video_timings *timings); + void (*set_timings)(struct omap_dss_device *dssdev, + struct omap_video_timings *timings); + void (*get_timings)(struct omap_dss_device *dssdev, + struct omap_video_timings *timings); + + void (*set_data_lines)(struct omap_dss_device *dssdev, int data_lines); +}; + +struct omapdss_sdi_ops { + int (*connect)(struct omap_dss_device *dssdev, + struct omap_dss_device *dst); + void (*disconnect)(struct omap_dss_device *dssdev, + struct omap_dss_device *dst); + + int (*enable)(struct omap_dss_device *dssdev); + void (*disable)(struct omap_dss_device *dssdev); + + int (*check_timings)(struct omap_dss_device *dssdev, + struct omap_video_timings *timings); + void (*set_timings)(struct omap_dss_device *dssdev, + struct omap_video_timings *timings); + void (*get_timings)(struct omap_dss_device *dssdev, + struct omap_video_timings *timings); + + void (*set_datapairs)(struct omap_dss_device *dssdev, int datapairs); +}; + +struct omapdss_dvi_ops { + int (*connect)(struct omap_dss_device *dssdev, + struct omap_dss_device *dst); + void (*disconnect)(struct omap_dss_device *dssdev, + struct omap_dss_device *dst); + + int (*enable)(struct omap_dss_device *dssdev); + void (*disable)(struct omap_dss_device *dssdev); + + int (*check_timings)(struct omap_dss_device *dssdev, + struct omap_video_timings *timings); + void (*set_timings)(struct omap_dss_device *dssdev, + struct omap_video_timings *timings); + void (*get_timings)(struct omap_dss_device *dssdev, + struct omap_video_timings *timings); +}; + +struct omapdss_atv_ops { + int (*connect)(struct omap_dss_device *dssdev, + struct omap_dss_device *dst); + void (*disconnect)(struct omap_dss_device *dssdev, + struct omap_dss_device *dst); + + int (*enable)(struct omap_dss_device *dssdev); + void (*disable)(struct omap_dss_device *dssdev); + + int (*check_timings)(struct omap_dss_device *dssdev, + struct omap_video_timings *timings); + void (*set_timings)(struct omap_dss_device *dssdev, + struct omap_video_timings *timings); + void (*get_timings)(struct omap_dss_device *dssdev, + struct omap_video_timings *timings); + + void (*set_type)(struct omap_dss_device *dssdev, + enum omap_dss_venc_type type); + void (*invert_vid_out_polarity)(struct omap_dss_device *dssdev, + bool invert_polarity); + + int (*set_wss)(struct omap_dss_device *dssdev, u32 wss); + u32 (*get_wss)(struct omap_dss_device *dssdev); +}; + +struct omapdss_hdmi_ops { + int (*connect)(struct omap_dss_device *dssdev, + struct omap_dss_device *dst); + void (*disconnect)(struct omap_dss_device *dssdev, + struct omap_dss_device *dst); + + int (*enable)(struct omap_dss_device *dssdev); + void (*disable)(struct omap_dss_device *dssdev); + + int (*check_timings)(struct omap_dss_device *dssdev, + struct omap_video_timings *timings); + void (*set_timings)(struct omap_dss_device *dssdev, + struct omap_video_timings *timings); + void (*get_timings)(struct omap_dss_device *dssdev, + struct omap_video_timings *timings); + + int (*read_edid)(struct omap_dss_device *dssdev, u8 *buf, int len); + bool (*detect)(struct omap_dss_device *dssdev); + + /* + * Note: These functions might sleep. Do not call while + * holding a spinlock/readlock. + */ + int (*audio_enable)(struct omap_dss_device *dssdev); + void (*audio_disable)(struct omap_dss_device *dssdev); + bool (*audio_supported)(struct omap_dss_device *dssdev); + int (*audio_config)(struct omap_dss_device *dssdev, + struct omap_dss_audio *audio); + /* Note: These functions may not sleep */ + int (*audio_start)(struct omap_dss_device *dssdev); + void (*audio_stop)(struct omap_dss_device *dssdev); +}; + +struct omapdss_dsi_ops { + int (*connect)(struct omap_dss_device *dssdev, + struct omap_dss_device *dst); + void (*disconnect)(struct omap_dss_device *dssdev, + struct omap_dss_device *dst); + + int (*enable)(struct omap_dss_device *dssdev); + void (*disable)(struct omap_dss_device *dssdev, bool disconnect_lanes, + bool enter_ulps); + + /* bus configuration */ + int (*set_config)(struct omap_dss_device *dssdev, + const struct omap_dss_dsi_config *cfg); + int (*configure_pins)(struct omap_dss_device *dssdev, + const struct omap_dsi_pin_config *pin_cfg); + + void (*enable_hs)(struct omap_dss_device *dssdev, int channel, + bool enable); + int (*enable_te)(struct omap_dss_device *dssdev, bool enable); + + int (*update)(struct omap_dss_device *dssdev, int channel, + void (*callback)(int, void *), void *data); + + void (*bus_lock)(struct omap_dss_device *dssdev); + void (*bus_unlock)(struct omap_dss_device *dssdev); + + int (*enable_video_output)(struct omap_dss_device *dssdev, int channel); + void (*disable_video_output)(struct omap_dss_device *dssdev, + int channel); + + int (*request_vc)(struct omap_dss_device *dssdev, int *channel); + int (*set_vc_id)(struct omap_dss_device *dssdev, int channel, + int vc_id); + void (*release_vc)(struct omap_dss_device *dssdev, int channel); + + /* data transfer */ + int (*dcs_write)(struct omap_dss_device *dssdev, int channel, + u8 *data, int len); + int (*dcs_write_nosync)(struct omap_dss_device *dssdev, int channel, + u8 *data, int len); + int (*dcs_read)(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd, + u8 *data, int len); + + int (*gen_write)(struct omap_dss_device *dssdev, int channel, + u8 *data, int len); + int (*gen_write_nosync)(struct omap_dss_device *dssdev, int channel, + u8 *data, int len); + int (*gen_read)(struct omap_dss_device *dssdev, int channel, + u8 *reqdata, int reqlen, + u8 *data, int len); + + int (*bta_sync)(struct omap_dss_device *dssdev, int channel); + + int (*set_max_rx_packet_size)(struct omap_dss_device *dssdev, + int channel, u16 plen); +}; + +struct omap_dss_device { + struct device *dev; + + struct module *owner; + + struct list_head panel_list; + + /* alias in the form of "display%d" */ + char alias[16]; + + enum omap_display_type type; + enum omap_display_type output_type; + + union { + struct { + u8 data_lines; + } dpi; + + struct { + u8 channel; + u8 data_lines; + } rfbi; + + struct { + u8 datapairs; + } sdi; + + struct { + int module; + } dsi; + + struct { + enum omap_dss_venc_type type; + bool invert_polarity; + } venc; + } phy; + + struct { + struct omap_video_timings timings; + + enum omap_dss_dsi_pixel_format dsi_pix_fmt; + enum omap_dss_dsi_mode dsi_mode; + } panel; + + struct { + u8 pixel_size; + struct rfbi_timings rfbi_timings; + } ctrl; + + const char *name; + + /* used to match device to driver */ + const char *driver_name; + + void *data; + + struct omap_dss_driver *driver; + + union { + const struct omapdss_dpi_ops *dpi; + const struct omapdss_sdi_ops *sdi; + const struct omapdss_dvi_ops *dvi; + const struct omapdss_hdmi_ops *hdmi; + const struct omapdss_atv_ops *atv; + const struct omapdss_dsi_ops *dsi; + } ops; + + /* helper variable for driver suspend/resume */ + bool activate_after_resume; + + enum omap_display_caps caps; + + struct omap_dss_device *src; + + enum omap_dss_display_state state; + + enum omap_dss_audio_state audio_state; + + /* OMAP DSS output specific fields */ + + struct list_head list; + + /* DISPC channel for this output */ + enum omap_channel dispc_channel; + + /* output instance */ + enum omap_dss_output_id id; + + /* dynamic fields */ + struct omap_overlay_manager *manager; + + struct omap_dss_device *dst; +}; + +struct omap_dss_hdmi_data +{ + int ct_cp_hpd_gpio; + int ls_oe_gpio; + int hpd_gpio; +}; + +struct omap_dss_driver { + int (*probe)(struct omap_dss_device *); + void (*remove)(struct omap_dss_device *); + + int (*connect)(struct omap_dss_device *dssdev); + void (*disconnect)(struct omap_dss_device *dssdev); + + int (*enable)(struct omap_dss_device *display); + void (*disable)(struct omap_dss_device *display); + int (*run_test)(struct omap_dss_device *display, int test); + + int (*update)(struct omap_dss_device *dssdev, + u16 x, u16 y, u16 w, u16 h); + int (*sync)(struct omap_dss_device *dssdev); + + int (*enable_te)(struct omap_dss_device *dssdev, bool enable); + int (*get_te)(struct omap_dss_device *dssdev); + + u8 (*get_rotate)(struct omap_dss_device *dssdev); + int (*set_rotate)(struct omap_dss_device *dssdev, u8 rotate); + + bool (*get_mirror)(struct omap_dss_device *dssdev); + int (*set_mirror)(struct omap_dss_device *dssdev, bool enable); + + int (*memory_read)(struct omap_dss_device *dssdev, + void *buf, size_t size, + u16 x, u16 y, u16 w, u16 h); + + void (*get_resolution)(struct omap_dss_device *dssdev, + u16 *xres, u16 *yres); + void (*get_dimensions)(struct omap_dss_device *dssdev, + u32 *width, u32 *height); + int (*get_recommended_bpp)(struct omap_dss_device *dssdev); + + int (*check_timings)(struct omap_dss_device *dssdev, + struct omap_video_timings *timings); + void (*set_timings)(struct omap_dss_device *dssdev, + struct omap_video_timings *timings); + void (*get_timings)(struct omap_dss_device *dssdev, + struct omap_video_timings *timings); + + int (*set_wss)(struct omap_dss_device *dssdev, u32 wss); + u32 (*get_wss)(struct omap_dss_device *dssdev); + + int (*read_edid)(struct omap_dss_device *dssdev, u8 *buf, int len); + bool (*detect)(struct omap_dss_device *dssdev); + + /* + * For display drivers that support audio. This encompasses + * HDMI and DisplayPort at the moment. + */ + /* + * Note: These functions might sleep. Do not call while + * holding a spinlock/readlock. + */ + int (*audio_enable)(struct omap_dss_device *dssdev); + void (*audio_disable)(struct omap_dss_device *dssdev); + bool (*audio_supported)(struct omap_dss_device *dssdev); + int (*audio_config)(struct omap_dss_device *dssdev, + struct omap_dss_audio *audio); + /* Note: These functions may not sleep */ + int (*audio_start)(struct omap_dss_device *dssdev); + void (*audio_stop)(struct omap_dss_device *dssdev); + +}; + +enum omapdss_version omapdss_get_version(void); +bool omapdss_is_initialized(void); + +int omap_dss_register_driver(struct omap_dss_driver *); +void omap_dss_unregister_driver(struct omap_dss_driver *); + +int omapdss_register_display(struct omap_dss_device *dssdev); +void omapdss_unregister_display(struct omap_dss_device *dssdev); + +struct omap_dss_device *omap_dss_get_device(struct omap_dss_device *dssdev); +void omap_dss_put_device(struct omap_dss_device *dssdev); +#define for_each_dss_dev(d) while ((d = omap_dss_get_next_device(d)) != NULL) +struct omap_dss_device *omap_dss_get_next_device(struct omap_dss_device *from); +struct omap_dss_device *omap_dss_find_device(void *data, + int (*match)(struct omap_dss_device *dssdev, void *data)); +const char *omapdss_get_default_display_name(void); + +void videomode_to_omap_video_timings(const struct videomode *vm, + struct omap_video_timings *ovt); +void omap_video_timings_to_videomode(const struct omap_video_timings *ovt, + struct videomode *vm); + +int dss_feat_get_num_mgrs(void); +int dss_feat_get_num_ovls(void); +enum omap_display_type dss_feat_get_supported_displays(enum omap_channel channel); +enum omap_dss_output_id dss_feat_get_supported_outputs(enum omap_channel channel); +enum omap_color_mode dss_feat_get_supported_color_modes(enum omap_plane plane); + + + +int omap_dss_get_num_overlay_managers(void); +struct omap_overlay_manager *omap_dss_get_overlay_manager(int num); + +int omap_dss_get_num_overlays(void); +struct omap_overlay *omap_dss_get_overlay(int num); + +int omapdss_register_output(struct omap_dss_device *output); +void omapdss_unregister_output(struct omap_dss_device *output); +struct omap_dss_device *omap_dss_get_output(enum omap_dss_output_id id); +struct omap_dss_device *omap_dss_find_output(const char *name); +struct omap_dss_device *omap_dss_find_output_by_node(struct device_node *node); +int omapdss_output_set_device(struct omap_dss_device *out, + struct omap_dss_device *dssdev); +int omapdss_output_unset_device(struct omap_dss_device *out); + +struct omap_dss_device *omapdss_find_output_from_display(struct omap_dss_device *dssdev); +struct omap_overlay_manager *omapdss_find_mgr_from_display(struct omap_dss_device *dssdev); + +void omapdss_default_get_resolution(struct omap_dss_device *dssdev, + u16 *xres, u16 *yres); +int omapdss_default_get_recommended_bpp(struct omap_dss_device *dssdev); +void omapdss_default_get_timings(struct omap_dss_device *dssdev, + struct omap_video_timings *timings); + +typedef void (*omap_dispc_isr_t) (void *arg, u32 mask); +int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask); +int omap_dispc_unregister_isr(omap_dispc_isr_t isr, void *arg, u32 mask); + +u32 dispc_read_irqstatus(void); +void dispc_clear_irqstatus(u32 mask); +u32 dispc_read_irqenable(void); +void dispc_write_irqenable(u32 mask); + +int dispc_request_irq(irq_handler_t handler, void *dev_id); +void dispc_free_irq(void *dev_id); + +int dispc_runtime_get(void); +void dispc_runtime_put(void); + +void dispc_mgr_enable(enum omap_channel channel, bool enable); +bool dispc_mgr_is_enabled(enum omap_channel channel); +u32 dispc_mgr_get_vsync_irq(enum omap_channel channel); +u32 dispc_mgr_get_framedone_irq(enum omap_channel channel); +u32 dispc_mgr_get_sync_lost_irq(enum omap_channel channel); +bool dispc_mgr_go_busy(enum omap_channel channel); +void dispc_mgr_go(enum omap_channel channel); +void dispc_mgr_set_lcd_config(enum omap_channel channel, + const struct dss_lcd_mgr_config *config); +void dispc_mgr_set_timings(enum omap_channel channel, + const struct omap_video_timings *timings); +void dispc_mgr_setup(enum omap_channel channel, + const struct omap_overlay_manager_info *info); + +int dispc_ovl_check(enum omap_plane plane, enum omap_channel channel, + const struct omap_overlay_info *oi, + const struct omap_video_timings *timings, + int *x_predecim, int *y_predecim); + +int dispc_ovl_enable(enum omap_plane plane, bool enable); +bool dispc_ovl_enabled(enum omap_plane plane); +void dispc_ovl_set_channel_out(enum omap_plane plane, + enum omap_channel channel); +int dispc_ovl_setup(enum omap_plane plane, const struct omap_overlay_info *oi, + bool replication, const struct omap_video_timings *mgr_timings, + bool mem_to_mem); + +int omapdss_compat_init(void); +void omapdss_compat_uninit(void); + +struct dss_mgr_ops { + int (*connect)(struct omap_overlay_manager *mgr, + struct omap_dss_device *dst); + void (*disconnect)(struct omap_overlay_manager *mgr, + struct omap_dss_device *dst); + + void (*start_update)(struct omap_overlay_manager *mgr); + int (*enable)(struct omap_overlay_manager *mgr); + void (*disable)(struct omap_overlay_manager *mgr); + void (*set_timings)(struct omap_overlay_manager *mgr, + const struct omap_video_timings *timings); + void (*set_lcd_config)(struct omap_overlay_manager *mgr, + const struct dss_lcd_mgr_config *config); + int (*register_framedone_handler)(struct omap_overlay_manager *mgr, + void (*handler)(void *), void *data); + void (*unregister_framedone_handler)(struct omap_overlay_manager *mgr, + void (*handler)(void *), void *data); +}; + +int dss_install_mgr_ops(const struct dss_mgr_ops *mgr_ops); +void dss_uninstall_mgr_ops(void); + +int dss_mgr_connect(struct omap_overlay_manager *mgr, + struct omap_dss_device *dst); +void dss_mgr_disconnect(struct omap_overlay_manager *mgr, + struct omap_dss_device *dst); +void dss_mgr_set_timings(struct omap_overlay_manager *mgr, + const struct omap_video_timings *timings); +void dss_mgr_set_lcd_config(struct omap_overlay_manager *mgr, + const struct dss_lcd_mgr_config *config); +int dss_mgr_enable(struct omap_overlay_manager *mgr); +void dss_mgr_disable(struct omap_overlay_manager *mgr); +void dss_mgr_start_update(struct omap_overlay_manager *mgr); +int dss_mgr_register_framedone_handler(struct omap_overlay_manager *mgr, + void (*handler)(void *), void *data); +void dss_mgr_unregister_framedone_handler(struct omap_overlay_manager *mgr, + void (*handler)(void *), void *data); + +static inline bool omapdss_device_is_connected(struct omap_dss_device *dssdev) +{ + return dssdev->src; +} + +static inline bool omapdss_device_is_enabled(struct omap_dss_device *dssdev) +{ + return dssdev->state == OMAP_DSS_DISPLAY_ACTIVE; +} + +struct device_node * +omapdss_of_get_next_port(const struct device_node *parent, + struct device_node *prev); + +struct device_node * +omapdss_of_get_next_endpoint(const struct device_node *parent, + struct device_node *prev); + +struct device_node * +omapdss_of_get_first_endpoint(const struct device_node *parent); + +struct omap_dss_device * +omapdss_of_find_source_for_first_ep(struct device_node *node); + +#endif diff --git a/include/video/omapvrfb.h b/include/video/omapvrfb.h new file mode 100644 index 00000000000..bb0bd89f8bc --- /dev/null +++ b/include/video/omapvrfb.h @@ -0,0 +1,68 @@ +/* + * VRFB Rotation Engine + * + * Copyright (C) 2009 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef __OMAP_VRFB_H__ +#define __OMAP_VRFB_H__ + +#define OMAP_VRFB_LINE_LEN 2048 + +struct vrfb { + u8 context; + void __iomem *vaddr[4]; + unsigned long paddr[4]; + u16 xres; + u16 yres; + u16 xoffset; + u16 yoffset; + u8 bytespp; + bool yuv_mode; +}; + +#ifdef CONFIG_OMAP2_VRFB +extern bool omap_vrfb_supported(void); +extern int omap_vrfb_request_ctx(struct vrfb *vrfb); +extern void omap_vrfb_release_ctx(struct vrfb *vrfb); +extern void omap_vrfb_adjust_size(u16 *width, u16 *height, + u8 bytespp); +extern u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp); +extern u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp); +extern void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr, + u16 width, u16 height, + unsigned bytespp, bool yuv_mode); +extern int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot); +extern void omap_vrfb_restore_context(void); + +#else +static inline bool omap_vrfb_supported(void) { return false; } +static inline int omap_vrfb_request_ctx(struct vrfb *vrfb) { return 0; } +static inline void omap_vrfb_release_ctx(struct vrfb *vrfb) {} +static inline void omap_vrfb_adjust_size(u16 *width, u16 *height, + u8 bytespp) {} +static inline u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp) + { return 0; } +static inline u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp) + { return 0; } +static inline void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr, + u16 width, u16 height, unsigned bytespp, bool yuv_mode) {} +static inline int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot) + { return 0; } +static inline void omap_vrfb_restore_context(void) {} +#endif +#endif /* __VRFB_H */ diff --git a/include/video/platform_lcd.h b/include/video/platform_lcd.h new file mode 100644 index 00000000000..23864b28414 --- /dev/null +++ b/include/video/platform_lcd.h @@ -0,0 +1,22 @@ +/* include/video/platform_lcd.h + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Generic platform-device LCD power control interface. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +struct plat_lcd_data; +struct fb_info; + +struct plat_lcd_data { + int (*probe)(struct plat_lcd_data *); + void (*set_power)(struct plat_lcd_data *, unsigned int power); + int (*match_fb)(struct plat_lcd_data *, struct fb_info *); +}; + diff --git a/include/video/pxa168fb.h b/include/video/pxa168fb.h new file mode 100644 index 00000000000..84cbb1f69ea --- /dev/null +++ b/include/video/pxa168fb.h @@ -0,0 +1,123 @@ +/* + * Copyright (C) 2009 Marvell International Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_MACH_PXA168FB_H +#define __ASM_MACH_PXA168FB_H + +#include <linux/fb.h> +#include <linux/interrupt.h> + +/* Dumb interface */ +#define PIN_MODE_DUMB_24 0 +#define PIN_MODE_DUMB_18_SPI 1 +#define PIN_MODE_DUMB_18_GPIO 2 +#define PIN_MODE_DUMB_16_SPI 3 +#define PIN_MODE_DUMB_16_GPIO 4 +#define PIN_MODE_DUMB_12_SPI_GPIO 5 +#define PIN_MODE_SMART_18_SPI 6 +#define PIN_MODE_SMART_16_SPI 7 +#define PIN_MODE_SMART_8_SPI_GPIO 8 + +/* Dumb interface pin allocation */ +#define DUMB_MODE_RGB565 0 +#define DUMB_MODE_RGB565_UPPER 1 +#define DUMB_MODE_RGB666 2 +#define DUMB_MODE_RGB666_UPPER 3 +#define DUMB_MODE_RGB444 4 +#define DUMB_MODE_RGB444_UPPER 5 +#define DUMB_MODE_RGB888 6 + +/* default fb buffer size WVGA-32bits */ +#define DEFAULT_FB_SIZE (800 * 480 * 4) + +/* + * Buffer pixel format + * bit0 is for rb swap. + * bit12 is for Y UorV swap + */ +#define PIX_FMT_RGB565 0 +#define PIX_FMT_BGR565 1 +#define PIX_FMT_RGB1555 2 +#define PIX_FMT_BGR1555 3 +#define PIX_FMT_RGB888PACK 4 +#define PIX_FMT_BGR888PACK 5 +#define PIX_FMT_RGB888UNPACK 6 +#define PIX_FMT_BGR888UNPACK 7 +#define PIX_FMT_RGBA888 8 +#define PIX_FMT_BGRA888 9 +#define PIX_FMT_YUV422PACK 10 +#define PIX_FMT_YVU422PACK 11 +#define PIX_FMT_YUV422PLANAR 12 +#define PIX_FMT_YVU422PLANAR 13 +#define PIX_FMT_YUV420PLANAR 14 +#define PIX_FMT_YVU420PLANAR 15 +#define PIX_FMT_PSEUDOCOLOR 20 +#define PIX_FMT_UYVY422PACK (0x1000|PIX_FMT_YUV422PACK) + +/* + * PXA LCD controller private state. + */ +struct pxa168fb_info { + struct device *dev; + struct clk *clk; + struct fb_info *info; + + void __iomem *reg_base; + dma_addr_t fb_start_dma; + u32 pseudo_palette[16]; + + int pix_fmt; + unsigned is_blanked:1; + unsigned panel_rbswap:1; + unsigned active:1; +}; + +/* + * PXA fb machine information + */ +struct pxa168fb_mach_info { + char id[16]; + + int num_modes; + struct fb_videomode *modes; + + /* + * Pix_fmt + */ + unsigned pix_fmt; + + /* + * I/O pin allocation. + */ + unsigned io_pin_allocation_mode:4; + + /* + * Dumb panel -- assignment of R/G/B component info to the 24 + * available external data lanes. + */ + unsigned dumb_mode:4; + unsigned panel_rgb_reverse_lanes:1; + + /* + * Dumb panel -- GPIO output data. + */ + unsigned gpio_output_mask:8; + unsigned gpio_output_data:8; + + /* + * Dumb panel -- configurable output signal polarity. + */ + unsigned invert_composite_blank:1; + unsigned invert_pix_val_ena:1; + unsigned invert_pixclock:1; + unsigned panel_rbswap:1; + unsigned active:1; + unsigned enable_lcd:1; +}; + +#endif /* __ASM_MACH_PXA168FB_H */ diff --git a/include/video/radeon.h b/include/video/radeon.h index 83467e18f5e..56b188abfb5 100644 --- a/include/video/radeon.h +++ b/include/video/radeon.h @@ -5,21 +5,21 @@ #define RADEON_REGSIZE 0x4000 -#define MM_INDEX 0x0000 -#define MM_DATA 0x0004 -#define BUS_CNTL 0x0030 -#define HI_STAT 0x004C +#define MM_INDEX 0x0000 +#define MM_DATA 0x0004 +#define BUS_CNTL 0x0030 +#define HI_STAT 0x004C #define BUS_CNTL1 0x0034 -#define I2C_CNTL_1 0x0094 -#define CONFIG_CNTL 0x00E0 -#define CONFIG_MEMSIZE 0x00F8 -#define CONFIG_APER_0_BASE 0x0100 -#define CONFIG_APER_1_BASE 0x0104 -#define CONFIG_APER_SIZE 0x0108 -#define CONFIG_REG_1_BASE 0x010C -#define CONFIG_REG_APER_SIZE 0x0110 -#define PAD_AGPINPUT_DELAY 0x0164 -#define PAD_CTLR_STRENGTH 0x0168 +#define I2C_CNTL_1 0x0094 +#define CNFG_CNTL 0x00E0 +#define CNFG_MEMSIZE 0x00F8 +#define CNFG_APER_0_BASE 0x0100 +#define CNFG_APER_1_BASE 0x0104 +#define CNFG_APER_SIZE 0x0108 +#define CNFG_REG_1_BASE 0x010C +#define CNFG_REG_APER_SIZE 0x0110 +#define PAD_AGPINPUT_DELAY 0x0164 +#define PAD_CTLR_STRENGTH 0x0168 #define PAD_CTLR_UPDATE 0x016C #define PAD_CTLR_MISC 0x0aa0 #define AGP_CNTL 0x0174 @@ -27,171 +27,171 @@ #define CAP0_TRIG_CNTL 0x0950 #define CAP1_TRIG_CNTL 0x09c0 #define VIPH_CONTROL 0x0C40 -#define VENDOR_ID 0x0F00 -#define DEVICE_ID 0x0F02 -#define COMMAND 0x0F04 -#define STATUS 0x0F06 -#define REVISION_ID 0x0F08 -#define REGPROG_INF 0x0F09 -#define SUB_CLASS 0x0F0A -#define BASE_CODE 0x0F0B -#define CACHE_LINE 0x0F0C -#define LATENCY 0x0F0D -#define HEADER 0x0F0E -#define BIST 0x0F0F -#define REG_MEM_BASE 0x0F10 -#define REG_IO_BASE 0x0F14 +#define VENDOR_ID 0x0F00 +#define DEVICE_ID 0x0F02 +#define COMMAND 0x0F04 +#define STATUS 0x0F06 +#define REVISION_ID 0x0F08 +#define REGPROG_INF 0x0F09 +#define SUB_CLASS 0x0F0A +#define BASE_CODE 0x0F0B +#define CACHE_LINE 0x0F0C +#define LATENCY 0x0F0D +#define HEADER 0x0F0E +#define BIST 0x0F0F +#define REG_MEM_BASE 0x0F10 +#define REG_IO_BASE 0x0F14 #define REG_REG_BASE 0x0F18 #define ADAPTER_ID 0x0F2C #define BIOS_ROM 0x0F30 -#define CAPABILITIES_PTR 0x0F34 -#define INTERRUPT_LINE 0x0F3C -#define INTERRUPT_PIN 0x0F3D -#define MIN_GRANT 0x0F3E -#define MAX_LATENCY 0x0F3F -#define ADAPTER_ID_W 0x0F4C -#define PMI_CAP_ID 0x0F50 -#define PMI_NXT_CAP_PTR 0x0F51 -#define PMI_PMC_REG 0x0F52 -#define PM_STATUS 0x0F54 -#define PMI_DATA 0x0F57 -#define AGP_CAP_ID 0x0F58 -#define AGP_STATUS 0x0F5C -#define AGP_COMMAND 0x0F60 +#define CAPABILITIES_PTR 0x0F34 +#define INTERRUPT_LINE 0x0F3C +#define INTERRUPT_PIN 0x0F3D +#define MIN_GRANT 0x0F3E +#define MAX_LATENCY 0x0F3F +#define ADAPTER_ID_W 0x0F4C +#define PMI_CAP_ID 0x0F50 +#define PMI_NXT_CAP_PTR 0x0F51 +#define PMI_PMC_REG 0x0F52 +#define PM_STATUS 0x0F54 +#define PMI_DATA 0x0F57 +#define AGP_CAP_ID 0x0F58 +#define AGP_STATUS 0x0F5C +#define AGP_COMMAND 0x0F60 #define AIC_CTRL 0x01D0 #define AIC_STAT 0x01D4 #define AIC_PT_BASE 0x01D8 -#define AIC_LO_ADDR 0x01DC -#define AIC_HI_ADDR 0x01E0 -#define AIC_TLB_ADDR 0x01E4 -#define AIC_TLB_DATA 0x01E8 -#define DAC_CNTL 0x0058 +#define AIC_LO_ADDR 0x01DC +#define AIC_HI_ADDR 0x01E0 +#define AIC_TLB_ADDR 0x01E4 +#define AIC_TLB_DATA 0x01E8 +#define DAC_CNTL 0x0058 #define DAC_CNTL2 0x007c -#define CRTC_GEN_CNTL 0x0050 -#define MEM_CNTL 0x0140 +#define CRTC_GEN_CNTL 0x0050 +#define MEM_CNTL 0x0140 #define MC_CNTL 0x0140 -#define EXT_MEM_CNTL 0x0144 +#define EXT_MEM_CNTL 0x0144 #define MC_TIMING_CNTL 0x0144 -#define MC_AGP_LOCATION 0x014C -#define MEM_IO_CNTL_A0 0x0178 +#define MC_AGP_LOCATION 0x014C +#define MEM_IO_CNTL_A0 0x0178 #define MEM_REFRESH_CNTL 0x0178 -#define MEM_INIT_LATENCY_TIMER 0x0154 +#define MEM_INIT_LATENCY_TIMER 0x0154 #define MC_INIT_GFX_LAT_TIMER 0x0154 -#define MEM_SDRAM_MODE_REG 0x0158 -#define AGP_BASE 0x0170 -#define MEM_IO_CNTL_A1 0x017C +#define MEM_SDRAM_MODE_REG 0x0158 +#define AGP_BASE 0x0170 +#define MEM_IO_CNTL_A1 0x017C #define MC_READ_CNTL_AB 0x017C #define MEM_IO_CNTL_B0 0x0180 #define MC_INIT_MISC_LAT_TIMER 0x0180 #define MEM_IO_CNTL_B1 0x0184 #define MC_IOPAD_CNTL 0x0184 #define MC_DEBUG 0x0188 -#define MC_STATUS 0x0150 -#define MEM_IO_OE_CNTL 0x018C +#define MC_STATUS 0x0150 +#define MEM_IO_OE_CNTL 0x018C #define MC_CHIP_IO_OE_CNTL_AB 0x018C -#define MC_FB_LOCATION 0x0148 -#define HOST_PATH_CNTL 0x0130 -#define MEM_VGA_WP_SEL 0x0038 -#define MEM_VGA_RP_SEL 0x003C -#define HDP_DEBUG 0x0138 +#define MC_FB_LOCATION 0x0148 +#define HOST_PATH_CNTL 0x0130 +#define MEM_VGA_WP_SEL 0x0038 +#define MEM_VGA_RP_SEL 0x003C +#define HDP_DEBUG 0x0138 #define SW_SEMAPHORE 0x013C -#define CRTC2_GEN_CNTL 0x03f8 +#define CRTC2_GEN_CNTL 0x03f8 #define CRTC2_DISPLAY_BASE_ADDR 0x033c -#define SURFACE_CNTL 0x0B00 -#define SURFACE0_LOWER_BOUND 0x0B04 -#define SURFACE1_LOWER_BOUND 0x0B14 -#define SURFACE2_LOWER_BOUND 0x0B24 -#define SURFACE3_LOWER_BOUND 0x0B34 -#define SURFACE4_LOWER_BOUND 0x0B44 +#define SURFACE_CNTL 0x0B00 +#define SURFACE0_LOWER_BOUND 0x0B04 +#define SURFACE1_LOWER_BOUND 0x0B14 +#define SURFACE2_LOWER_BOUND 0x0B24 +#define SURFACE3_LOWER_BOUND 0x0B34 +#define SURFACE4_LOWER_BOUND 0x0B44 #define SURFACE5_LOWER_BOUND 0x0B54 #define SURFACE6_LOWER_BOUND 0x0B64 #define SURFACE7_LOWER_BOUND 0x0B74 -#define SURFACE0_UPPER_BOUND 0x0B08 -#define SURFACE1_UPPER_BOUND 0x0B18 -#define SURFACE2_UPPER_BOUND 0x0B28 -#define SURFACE3_UPPER_BOUND 0x0B38 -#define SURFACE4_UPPER_BOUND 0x0B48 -#define SURFACE5_UPPER_BOUND 0x0B58 -#define SURFACE6_UPPER_BOUND 0x0B68 -#define SURFACE7_UPPER_BOUND 0x0B78 -#define SURFACE0_INFO 0x0B0C -#define SURFACE1_INFO 0x0B1C -#define SURFACE2_INFO 0x0B2C -#define SURFACE3_INFO 0x0B3C -#define SURFACE4_INFO 0x0B4C -#define SURFACE5_INFO 0x0B5C +#define SURFACE0_UPPER_BOUND 0x0B08 +#define SURFACE1_UPPER_BOUND 0x0B18 +#define SURFACE2_UPPER_BOUND 0x0B28 +#define SURFACE3_UPPER_BOUND 0x0B38 +#define SURFACE4_UPPER_BOUND 0x0B48 +#define SURFACE5_UPPER_BOUND 0x0B58 +#define SURFACE6_UPPER_BOUND 0x0B68 +#define SURFACE7_UPPER_BOUND 0x0B78 +#define SURFACE0_INFO 0x0B0C +#define SURFACE1_INFO 0x0B1C +#define SURFACE2_INFO 0x0B2C +#define SURFACE3_INFO 0x0B3C +#define SURFACE4_INFO 0x0B4C +#define SURFACE5_INFO 0x0B5C #define SURFACE6_INFO 0x0B6C #define SURFACE7_INFO 0x0B7C #define SURFACE_ACCESS_FLAGS 0x0BF8 -#define SURFACE_ACCESS_CLR 0x0BFC -#define GEN_INT_CNTL 0x0040 -#define GEN_INT_STATUS 0x0044 +#define SURFACE_ACCESS_CLR 0x0BFC +#define GEN_INT_CNTL 0x0040 +#define GEN_INT_STATUS 0x0044 #define CRTC_EXT_CNTL 0x0054 -#define RB3D_CNTL 0x1C3C -#define WAIT_UNTIL 0x1720 -#define ISYNC_CNTL 0x1724 -#define RBBM_GUICNTL 0x172C -#define RBBM_STATUS 0x0E40 -#define RBBM_STATUS_alt_1 0x1740 -#define RBBM_CNTL 0x00EC -#define RBBM_CNTL_alt_1 0x0E44 -#define RBBM_SOFT_RESET 0x00F0 -#define RBBM_SOFT_RESET_alt_1 0x0E48 -#define NQWAIT_UNTIL 0x0E50 +#define RB3D_CNTL 0x1C3C +#define WAIT_UNTIL 0x1720 +#define ISYNC_CNTL 0x1724 +#define RBBM_GUICNTL 0x172C +#define RBBM_STATUS 0x0E40 +#define RBBM_STATUS_alt_1 0x1740 +#define RBBM_CNTL 0x00EC +#define RBBM_CNTL_alt_1 0x0E44 +#define RBBM_SOFT_RESET 0x00F0 +#define RBBM_SOFT_RESET_alt_1 0x0E48 +#define NQWAIT_UNTIL 0x0E50 #define RBBM_DEBUG 0x0E6C #define RBBM_CMDFIFO_ADDR 0x0E70 #define RBBM_CMDFIFO_DATAL 0x0E74 -#define RBBM_CMDFIFO_DATAH 0x0E78 -#define RBBM_CMDFIFO_STAT 0x0E7C -#define CRTC_STATUS 0x005C -#define GPIO_VGA_DDC 0x0060 -#define GPIO_DVI_DDC 0x0064 -#define GPIO_MONID 0x0068 +#define RBBM_CMDFIFO_DATAH 0x0E78 +#define RBBM_CMDFIFO_STAT 0x0E7C +#define CRTC_STATUS 0x005C +#define GPIO_VGA_DDC 0x0060 +#define GPIO_DVI_DDC 0x0064 +#define GPIO_MONID 0x0068 #define GPIO_CRT2_DDC 0x006c -#define PALETTE_INDEX 0x00B0 -#define PALETTE_DATA 0x00B4 -#define PALETTE_30_DATA 0x00B8 -#define CRTC_H_TOTAL_DISP 0x0200 -#define CRTC_H_SYNC_STRT_WID 0x0204 -#define CRTC_V_TOTAL_DISP 0x0208 -#define CRTC_V_SYNC_STRT_WID 0x020C -#define CRTC_VLINE_CRNT_VLINE 0x0210 +#define PALETTE_INDEX 0x00B0 +#define PALETTE_DATA 0x00B4 +#define PALETTE_30_DATA 0x00B8 +#define CRTC_H_TOTAL_DISP 0x0200 +#define CRTC_H_SYNC_STRT_WID 0x0204 +#define CRTC_V_TOTAL_DISP 0x0208 +#define CRTC_V_SYNC_STRT_WID 0x020C +#define CRTC_VLINE_CRNT_VLINE 0x0210 #define CRTC_CRNT_FRAME 0x0214 #define CRTC_GUI_TRIG_VLINE 0x0218 #define CRTC_DEBUG 0x021C -#define CRTC_OFFSET_RIGHT 0x0220 -#define CRTC_OFFSET 0x0224 -#define CRTC_OFFSET_CNTL 0x0228 -#define CRTC_PITCH 0x022C -#define OVR_CLR 0x0230 -#define OVR_WID_LEFT_RIGHT 0x0234 -#define OVR_WID_TOP_BOTTOM 0x0238 -#define DISPLAY_BASE_ADDR 0x023C -#define SNAPSHOT_VH_COUNTS 0x0240 -#define SNAPSHOT_F_COUNT 0x0244 -#define N_VIF_COUNT 0x0248 -#define SNAPSHOT_VIF_COUNT 0x024C -#define FP_CRTC_H_TOTAL_DISP 0x0250 -#define FP_CRTC_V_TOTAL_DISP 0x0254 +#define CRTC_OFFSET_RIGHT 0x0220 +#define CRTC_OFFSET 0x0224 +#define CRTC_OFFSET_CNTL 0x0228 +#define CRTC_PITCH 0x022C +#define OVR_CLR 0x0230 +#define OVR_WID_LEFT_RIGHT 0x0234 +#define OVR_WID_TOP_BOTTOM 0x0238 +#define DISPLAY_BASE_ADDR 0x023C +#define SNAPSHOT_VH_COUNTS 0x0240 +#define SNAPSHOT_F_COUNT 0x0244 +#define N_VIF_COUNT 0x0248 +#define SNAPSHOT_VIF_COUNT 0x024C +#define FP_CRTC_H_TOTAL_DISP 0x0250 +#define FP_CRTC_V_TOTAL_DISP 0x0254 #define CRT_CRTC_H_SYNC_STRT_WID 0x0258 #define CRT_CRTC_V_SYNC_STRT_WID 0x025C #define CUR_OFFSET 0x0260 -#define CUR_HORZ_VERT_POSN 0x0264 -#define CUR_HORZ_VERT_OFF 0x0268 -#define CUR_CLR0 0x026C -#define CUR_CLR1 0x0270 -#define FP_HORZ_VERT_ACTIVE 0x0278 -#define CRTC_MORE_CNTL 0x027C +#define CUR_HORZ_VERT_POSN 0x0264 +#define CUR_HORZ_VERT_OFF 0x0268 +#define CUR_CLR0 0x026C +#define CUR_CLR1 0x0270 +#define FP_HORZ_VERT_ACTIVE 0x0278 +#define CRTC_MORE_CNTL 0x027C #define CRTC_H_CUTOFF_ACTIVE_EN (1<<4) #define CRTC_V_CUTOFF_ACTIVE_EN (1<<5) -#define DAC_EXT_CNTL 0x0280 -#define FP_GEN_CNTL 0x0284 -#define FP_HORZ_STRETCH 0x028C -#define FP_VERT_STRETCH 0x0290 -#define FP_H_SYNC_STRT_WID 0x02C4 -#define FP_V_SYNC_STRT_WID 0x02C8 -#define AUX_WINDOW_HORZ_CNTL 0x02D8 -#define AUX_WINDOW_VERT_CNTL 0x02DC +#define DAC_EXT_CNTL 0x0280 +#define FP_GEN_CNTL 0x0284 +#define FP_HORZ_STRETCH 0x028C +#define FP_VERT_STRETCH 0x0290 +#define FP_H_SYNC_STRT_WID 0x02C4 +#define FP_V_SYNC_STRT_WID 0x02C8 +#define AUX_WINDOW_HORZ_CNTL 0x02D8 +#define AUX_WINDOW_VERT_CNTL 0x02DC //#define DDA_CONFIG 0x02e0 //#define DDA_ON_OFF 0x02e4 #define DVI_I2C_CNTL_1 0x02e4 @@ -199,194 +199,194 @@ #define GRPH2_BUFFER_CNTL 0x03F0 #define VGA_BUFFER_CNTL 0x02F4 #define OV0_Y_X_START 0x0400 -#define OV0_Y_X_END 0x0404 -#define OV0_PIPELINE_CNTL 0x0408 -#define OV0_REG_LOAD_CNTL 0x0410 -#define OV0_SCALE_CNTL 0x0420 -#define OV0_V_INC 0x0424 -#define OV0_P1_V_ACCUM_INIT 0x0428 -#define OV0_P23_V_ACCUM_INIT 0x042C -#define OV0_P1_BLANK_LINES_AT_TOP 0x0430 -#define OV0_P23_BLANK_LINES_AT_TOP 0x0434 -#define OV0_BASE_ADDR 0x043C -#define OV0_VID_BUF0_BASE_ADRS 0x0440 -#define OV0_VID_BUF1_BASE_ADRS 0x0444 -#define OV0_VID_BUF2_BASE_ADRS 0x0448 -#define OV0_VID_BUF3_BASE_ADRS 0x044C +#define OV0_Y_X_END 0x0404 +#define OV0_PIPELINE_CNTL 0x0408 +#define OV0_REG_LOAD_CNTL 0x0410 +#define OV0_SCALE_CNTL 0x0420 +#define OV0_V_INC 0x0424 +#define OV0_P1_V_ACCUM_INIT 0x0428 +#define OV0_P23_V_ACCUM_INIT 0x042C +#define OV0_P1_BLANK_LINES_AT_TOP 0x0430 +#define OV0_P23_BLANK_LINES_AT_TOP 0x0434 +#define OV0_BASE_ADDR 0x043C +#define OV0_VID_BUF0_BASE_ADRS 0x0440 +#define OV0_VID_BUF1_BASE_ADRS 0x0444 +#define OV0_VID_BUF2_BASE_ADRS 0x0448 +#define OV0_VID_BUF3_BASE_ADRS 0x044C #define OV0_VID_BUF4_BASE_ADRS 0x0450 #define OV0_VID_BUF5_BASE_ADRS 0x0454 #define OV0_VID_BUF_PITCH0_VALUE 0x0460 -#define OV0_VID_BUF_PITCH1_VALUE 0x0464 -#define OV0_AUTO_FLIP_CNTRL 0x0470 -#define OV0_DEINTERLACE_PATTERN 0x0474 -#define OV0_SUBMIT_HISTORY 0x0478 -#define OV0_H_INC 0x0480 -#define OV0_STEP_BY 0x0484 -#define OV0_P1_H_ACCUM_INIT 0x0488 -#define OV0_P23_H_ACCUM_INIT 0x048C -#define OV0_P1_X_START_END 0x0494 -#define OV0_P2_X_START_END 0x0498 -#define OV0_P3_X_START_END 0x049C -#define OV0_FILTER_CNTL 0x04A0 -#define OV0_FOUR_TAP_COEF_0 0x04B0 -#define OV0_FOUR_TAP_COEF_1 0x04B4 +#define OV0_VID_BUF_PITCH1_VALUE 0x0464 +#define OV0_AUTO_FLIP_CNTRL 0x0470 +#define OV0_DEINTERLACE_PATTERN 0x0474 +#define OV0_SUBMIT_HISTORY 0x0478 +#define OV0_H_INC 0x0480 +#define OV0_STEP_BY 0x0484 +#define OV0_P1_H_ACCUM_INIT 0x0488 +#define OV0_P23_H_ACCUM_INIT 0x048C +#define OV0_P1_X_START_END 0x0494 +#define OV0_P2_X_START_END 0x0498 +#define OV0_P3_X_START_END 0x049C +#define OV0_FILTER_CNTL 0x04A0 +#define OV0_FOUR_TAP_COEF_0 0x04B0 +#define OV0_FOUR_TAP_COEF_1 0x04B4 #define OV0_FOUR_TAP_COEF_2 0x04B8 #define OV0_FOUR_TAP_COEF_3 0x04BC #define OV0_FOUR_TAP_COEF_4 0x04C0 -#define OV0_FLAG_CNTRL 0x04DC -#define OV0_SLICE_CNTL 0x04E0 -#define OV0_VID_KEY_CLR_LOW 0x04E4 -#define OV0_VID_KEY_CLR_HIGH 0x04E8 -#define OV0_GRPH_KEY_CLR_LOW 0x04EC -#define OV0_GRPH_KEY_CLR_HIGH 0x04F0 -#define OV0_KEY_CNTL 0x04F4 -#define OV0_TEST 0x04F8 -#define SUBPIC_CNTL 0x0540 -#define SUBPIC_DEFCOLCON 0x0544 -#define SUBPIC_Y_X_START 0x054C -#define SUBPIC_Y_X_END 0x0550 -#define SUBPIC_V_INC 0x0554 -#define SUBPIC_H_INC 0x0558 +#define OV0_FLAG_CNTRL 0x04DC +#define OV0_SLICE_CNTL 0x04E0 +#define OV0_VID_KEY_CLR_LOW 0x04E4 +#define OV0_VID_KEY_CLR_HIGH 0x04E8 +#define OV0_GRPH_KEY_CLR_LOW 0x04EC +#define OV0_GRPH_KEY_CLR_HIGH 0x04F0 +#define OV0_KEY_CNTL 0x04F4 +#define OV0_TEST 0x04F8 +#define SUBPIC_CNTL 0x0540 +#define SUBPIC_DEFCOLCON 0x0544 +#define SUBPIC_Y_X_START 0x054C +#define SUBPIC_Y_X_END 0x0550 +#define SUBPIC_V_INC 0x0554 +#define SUBPIC_H_INC 0x0558 #define SUBPIC_BUF0_OFFSET 0x055C #define SUBPIC_BUF1_OFFSET 0x0560 #define SUBPIC_LC0_OFFSET 0x0564 -#define SUBPIC_LC1_OFFSET 0x0568 -#define SUBPIC_PITCH 0x056C -#define SUBPIC_BTN_HLI_COLCON 0x0570 -#define SUBPIC_BTN_HLI_Y_X_START 0x0574 -#define SUBPIC_BTN_HLI_Y_X_END 0x0578 -#define SUBPIC_PALETTE_INDEX 0x057C -#define SUBPIC_PALETTE_DATA 0x0580 -#define SUBPIC_H_ACCUM_INIT 0x0584 -#define SUBPIC_V_ACCUM_INIT 0x0588 -#define DISP_MISC_CNTL 0x0D00 -#define DAC_MACRO_CNTL 0x0D04 -#define DISP_PWR_MAN 0x0D08 -#define DISP_TEST_DEBUG_CNTL 0x0D10 -#define DISP_HW_DEBUG 0x0D14 +#define SUBPIC_LC1_OFFSET 0x0568 +#define SUBPIC_PITCH 0x056C +#define SUBPIC_BTN_HLI_COLCON 0x0570 +#define SUBPIC_BTN_HLI_Y_X_START 0x0574 +#define SUBPIC_BTN_HLI_Y_X_END 0x0578 +#define SUBPIC_PALETTE_INDEX 0x057C +#define SUBPIC_PALETTE_DATA 0x0580 +#define SUBPIC_H_ACCUM_INIT 0x0584 +#define SUBPIC_V_ACCUM_INIT 0x0588 +#define DISP_MISC_CNTL 0x0D00 +#define DAC_MACRO_CNTL 0x0D04 +#define DISP_PWR_MAN 0x0D08 +#define DISP_TEST_DEBUG_CNTL 0x0D10 +#define DISP_HW_DEBUG 0x0D14 #define DAC_CRC_SIG1 0x0D18 #define DAC_CRC_SIG2 0x0D1C #define OV0_LIN_TRANS_A 0x0D20 -#define OV0_LIN_TRANS_B 0x0D24 -#define OV0_LIN_TRANS_C 0x0D28 -#define OV0_LIN_TRANS_D 0x0D2C -#define OV0_LIN_TRANS_E 0x0D30 -#define OV0_LIN_TRANS_F 0x0D34 -#define OV0_GAMMA_0_F 0x0D40 -#define OV0_GAMMA_10_1F 0x0D44 -#define OV0_GAMMA_20_3F 0x0D48 -#define OV0_GAMMA_40_7F 0x0D4C -#define OV0_GAMMA_380_3BF 0x0D50 -#define OV0_GAMMA_3C0_3FF 0x0D54 -#define DISP_MERGE_CNTL 0x0D60 -#define DISP_OUTPUT_CNTL 0x0D64 -#define DISP_LIN_TRANS_GRPH_A 0x0D80 +#define OV0_LIN_TRANS_B 0x0D24 +#define OV0_LIN_TRANS_C 0x0D28 +#define OV0_LIN_TRANS_D 0x0D2C +#define OV0_LIN_TRANS_E 0x0D30 +#define OV0_LIN_TRANS_F 0x0D34 +#define OV0_GAMMA_0_F 0x0D40 +#define OV0_GAMMA_10_1F 0x0D44 +#define OV0_GAMMA_20_3F 0x0D48 +#define OV0_GAMMA_40_7F 0x0D4C +#define OV0_GAMMA_380_3BF 0x0D50 +#define OV0_GAMMA_3C0_3FF 0x0D54 +#define DISP_MERGE_CNTL 0x0D60 +#define DISP_OUTPUT_CNTL 0x0D64 +#define DISP_LIN_TRANS_GRPH_A 0x0D80 #define DISP_LIN_TRANS_GRPH_B 0x0D84 #define DISP_LIN_TRANS_GRPH_C 0x0D88 #define DISP_LIN_TRANS_GRPH_D 0x0D8C -#define DISP_LIN_TRANS_GRPH_E 0x0D90 -#define DISP_LIN_TRANS_GRPH_F 0x0D94 -#define DISP_LIN_TRANS_VID_A 0x0D98 -#define DISP_LIN_TRANS_VID_B 0x0D9C -#define DISP_LIN_TRANS_VID_C 0x0DA0 -#define DISP_LIN_TRANS_VID_D 0x0DA4 -#define DISP_LIN_TRANS_VID_E 0x0DA8 -#define DISP_LIN_TRANS_VID_F 0x0DAC -#define RMX_HORZ_FILTER_0TAP_COEF 0x0DB0 -#define RMX_HORZ_FILTER_1TAP_COEF 0x0DB4 -#define RMX_HORZ_FILTER_2TAP_COEF 0x0DB8 -#define RMX_HORZ_PHASE 0x0DBC -#define DAC_EMBEDDED_SYNC_CNTL 0x0DC0 -#define DAC_BROAD_PULSE 0x0DC4 +#define DISP_LIN_TRANS_GRPH_E 0x0D90 +#define DISP_LIN_TRANS_GRPH_F 0x0D94 +#define DISP_LIN_TRANS_VID_A 0x0D98 +#define DISP_LIN_TRANS_VID_B 0x0D9C +#define DISP_LIN_TRANS_VID_C 0x0DA0 +#define DISP_LIN_TRANS_VID_D 0x0DA4 +#define DISP_LIN_TRANS_VID_E 0x0DA8 +#define DISP_LIN_TRANS_VID_F 0x0DAC +#define RMX_HORZ_FILTER_0TAP_COEF 0x0DB0 +#define RMX_HORZ_FILTER_1TAP_COEF 0x0DB4 +#define RMX_HORZ_FILTER_2TAP_COEF 0x0DB8 +#define RMX_HORZ_PHASE 0x0DBC +#define DAC_EMBEDDED_SYNC_CNTL 0x0DC0 +#define DAC_BROAD_PULSE 0x0DC4 #define DAC_SKEW_CLKS 0x0DC8 #define DAC_INCR 0x0DCC #define DAC_NEG_SYNC_LEVEL 0x0DD0 -#define DAC_POS_SYNC_LEVEL 0x0DD4 -#define DAC_BLANK_LEVEL 0x0DD8 -#define CLOCK_CNTL_INDEX 0x0008 -#define CLOCK_CNTL_DATA 0x000C -#define CP_RB_CNTL 0x0704 -#define CP_RB_BASE 0x0700 -#define CP_RB_RPTR_ADDR 0x070C -#define CP_RB_RPTR 0x0710 -#define CP_RB_WPTR 0x0714 -#define CP_RB_WPTR_DELAY 0x0718 -#define CP_IB_BASE 0x0738 -#define CP_IB_BUFSZ 0x073C -#define SCRATCH_REG0 0x15E0 -#define GUI_SCRATCH_REG0 0x15E0 -#define SCRATCH_REG1 0x15E4 -#define GUI_SCRATCH_REG1 0x15E4 +#define DAC_POS_SYNC_LEVEL 0x0DD4 +#define DAC_BLANK_LEVEL 0x0DD8 +#define CLOCK_CNTL_INDEX 0x0008 +#define CLOCK_CNTL_DATA 0x000C +#define CP_RB_CNTL 0x0704 +#define CP_RB_BASE 0x0700 +#define CP_RB_RPTR_ADDR 0x070C +#define CP_RB_RPTR 0x0710 +#define CP_RB_WPTR 0x0714 +#define CP_RB_WPTR_DELAY 0x0718 +#define CP_IB_BASE 0x0738 +#define CP_IB_BUFSZ 0x073C +#define SCRATCH_REG0 0x15E0 +#define GUI_SCRATCH_REG0 0x15E0 +#define SCRATCH_REG1 0x15E4 +#define GUI_SCRATCH_REG1 0x15E4 #define SCRATCH_REG2 0x15E8 #define GUI_SCRATCH_REG2 0x15E8 #define SCRATCH_REG3 0x15EC -#define GUI_SCRATCH_REG3 0x15EC -#define SCRATCH_REG4 0x15F0 -#define GUI_SCRATCH_REG4 0x15F0 -#define SCRATCH_REG5 0x15F4 -#define GUI_SCRATCH_REG5 0x15F4 -#define SCRATCH_UMSK 0x0770 -#define SCRATCH_ADDR 0x0774 -#define DP_BRUSH_FRGD_CLR 0x147C +#define GUI_SCRATCH_REG3 0x15EC +#define SCRATCH_REG4 0x15F0 +#define GUI_SCRATCH_REG4 0x15F0 +#define SCRATCH_REG5 0x15F4 +#define GUI_SCRATCH_REG5 0x15F4 +#define SCRATCH_UMSK 0x0770 +#define SCRATCH_ADDR 0x0774 +#define DP_BRUSH_FRGD_CLR 0x147C #define DP_BRUSH_BKGD_CLR 0x1478 #define DST_LINE_START 0x1600 -#define DST_LINE_END 0x1604 -#define SRC_OFFSET 0x15AC +#define DST_LINE_END 0x1604 +#define SRC_OFFSET 0x15AC #define SRC_PITCH 0x15B0 #define SRC_TILE 0x1704 #define SRC_PITCH_OFFSET 0x1428 -#define SRC_X 0x1414 -#define SRC_Y 0x1418 -#define SRC_X_Y 0x1590 -#define SRC_Y_X 0x1434 +#define SRC_X 0x1414 +#define SRC_Y 0x1418 +#define SRC_X_Y 0x1590 +#define SRC_Y_X 0x1434 #define DST_Y_X 0x1438 #define DST_WIDTH_HEIGHT 0x1598 #define DST_HEIGHT_WIDTH 0x143c #define DST_OFFSET 0x1404 -#define SRC_CLUT_ADDRESS 0x1780 -#define SRC_CLUT_DATA 0x1784 -#define SRC_CLUT_DATA_RD 0x1788 -#define HOST_DATA0 0x17C0 -#define HOST_DATA1 0x17C4 -#define HOST_DATA2 0x17C8 -#define HOST_DATA3 0x17CC -#define HOST_DATA4 0x17D0 -#define HOST_DATA5 0x17D4 -#define HOST_DATA6 0x17D8 +#define SRC_CLUT_ADDRESS 0x1780 +#define SRC_CLUT_DATA 0x1784 +#define SRC_CLUT_DATA_RD 0x1788 +#define HOST_DATA0 0x17C0 +#define HOST_DATA1 0x17C4 +#define HOST_DATA2 0x17C8 +#define HOST_DATA3 0x17CC +#define HOST_DATA4 0x17D0 +#define HOST_DATA5 0x17D4 +#define HOST_DATA6 0x17D8 #define HOST_DATA7 0x17DC #define HOST_DATA_LAST 0x17E0 #define DP_SRC_ENDIAN 0x15D4 -#define DP_SRC_FRGD_CLR 0x15D8 -#define DP_SRC_BKGD_CLR 0x15DC -#define SC_LEFT 0x1640 -#define SC_RIGHT 0x1644 -#define SC_TOP 0x1648 -#define SC_BOTTOM 0x164C -#define SRC_SC_RIGHT 0x1654 -#define SRC_SC_BOTTOM 0x165C -#define DP_CNTL 0x16C0 -#define DP_CNTL_XDIR_YDIR_YMAJOR 0x16D0 -#define DP_DATATYPE 0x16C4 -#define DP_MIX 0x16C8 -#define DP_WRITE_MSK 0x16CC -#define DP_XOP 0x17F8 +#define DP_SRC_FRGD_CLR 0x15D8 +#define DP_SRC_BKGD_CLR 0x15DC +#define SC_LEFT 0x1640 +#define SC_RIGHT 0x1644 +#define SC_TOP 0x1648 +#define SC_BOTTOM 0x164C +#define SRC_SC_RIGHT 0x1654 +#define SRC_SC_BOTTOM 0x165C +#define DP_CNTL 0x16C0 +#define DP_CNTL_XDIR_YDIR_YMAJOR 0x16D0 +#define DP_DATATYPE 0x16C4 +#define DP_MIX 0x16C8 +#define DP_WRITE_MSK 0x16CC +#define DP_XOP 0x17F8 #define CLR_CMP_CLR_SRC 0x15C4 #define CLR_CMP_CLR_DST 0x15C8 #define CLR_CMP_CNTL 0x15C0 -#define CLR_CMP_MSK 0x15CC -#define DSTCACHE_MODE 0x1710 -#define DSTCACHE_CTLSTAT 0x1714 -#define DEFAULT_PITCH_OFFSET 0x16E0 -#define DEFAULT_SC_BOTTOM_RIGHT 0x16E8 +#define CLR_CMP_MSK 0x15CC +#define DSTCACHE_MODE 0x1710 +#define DSTCACHE_CTLSTAT 0x1714 +#define DEFAULT_PITCH_OFFSET 0x16E0 +#define DEFAULT_SC_BOTTOM_RIGHT 0x16E8 #define DEFAULT_SC_TOP_LEFT 0x16EC #define SRC_PITCH_OFFSET 0x1428 #define DST_PITCH_OFFSET 0x142C -#define DP_GUI_MASTER_CNTL 0x146C -#define SC_TOP_LEFT 0x16EC -#define SC_BOTTOM_RIGHT 0x16F0 -#define SRC_SC_BOTTOM_RIGHT 0x16F4 +#define DP_GUI_MASTER_CNTL 0x146C +#define SC_TOP_LEFT 0x16EC +#define SC_BOTTOM_RIGHT 0x16F0 +#define SRC_SC_BOTTOM_RIGHT 0x16F4 #define RB2D_DSTCACHE_MODE 0x3428 -#define RB2D_DSTCACHE_CTLSTAT 0x342C +#define RB2D_DSTCACHE_CTLSTAT_broken 0x342C /* do not use */ #define LVDS_GEN_CNTL 0x02d0 #define LVDS_PLL_CNTL 0x02d4 #define FP2_GEN_CNTL 0x0288 @@ -509,7 +509,7 @@ /* CLOCK_CNTL_INDEX bit constants */ #define PLL_WR_EN 0x00000080 -/* CONFIG_CNTL bit constants */ +/* CNFG_CNTL bit constants */ #define CFG_VGA_RAM_EN 0x00000100 #define CFG_ATI_REV_ID_MASK (0xf << 16) #define CFG_ATI_REV_A11 (0 << 16) @@ -527,10 +527,14 @@ /* DSTCACHE_CTLSTAT bit constants */ -#define RB2D_DC_FLUSH (3 << 0) -#define RB2D_DC_FLUSH_ALL 0xf +#define RB2D_DC_FLUSH_2D (1 << 0) +#define RB2D_DC_FREE_2D (1 << 2) +#define RB2D_DC_FLUSH_ALL (RB2D_DC_FLUSH_2D | RB2D_DC_FREE_2D) #define RB2D_DC_BUSY (1 << 31) +/* DSTCACHE_MODE bits constants */ +#define RB2D_DC_AUTOFLUSH_ENABLE (1 << 8) +#define RB2D_DC_DC_DISABLE_IGNORE_PE (1 << 17) /* CRTC_GEN_CNTL bit constants */ #define CRTC_DBL_SCAN_EN 0x00000001 @@ -682,7 +686,7 @@ #define VERT_FP_LOOP_STRETCH (0x7 << 28) #define VERT_STRETCH_RESERVED 0xf1000000 -/* DAC_CNTL bit constants */ +/* DAC_CNTL bit constants */ #define DAC_8BIT_EN 0x00000100 #define DAC_4BPP_PIX_ORDER 0x00000200 #define DAC_CRC_EN 0x00080000 @@ -696,7 +700,7 @@ #define DAC_CMP_EN (1 << 3) #define DAC_CMP_OUTPUT (1 << 7) -/* DAC_CNTL2 bit constants */ +/* DAC_CNTL2 bit constants */ #define DAC2_EXPAND_MODE (1 << 14) #define DAC2_CMP_EN (1 << 7) #define DAC2_PALETTE_ACCESS_CNTL (1 << 5) @@ -741,6 +745,10 @@ #define SOFT_RESET_RB (1 << 6) #define SOFT_RESET_HDP (1 << 7) +/* WAIT_UNTIL bit constants */ +#define WAIT_DMA_GUI_IDLE (1 << 9) +#define WAIT_2D_IDLECLEAN (1 << 16) + /* SURFACE_CNTL bit consants */ #define SURF_TRANSLATION_DIS (1 << 8) #define NONSURF_AP0_SWP_16BPP (1 << 20) @@ -972,7 +980,7 @@ /* masks */ -#define CONFIG_MEMSIZE_MASK 0x1f000000 +#define CNFG_MEMSIZE_MASK 0x1f000000 #define MEM_CFG_TYPE 0x40000000 #define DST_OFFSET_MASK 0x003fffff #define DST_PITCH_MASK 0x3fc00000 diff --git a/include/video/s1d13xxxfb.h b/include/video/s1d13xxxfb.h index c99d261df8f..55f534491a3 100644 --- a/include/video/s1d13xxxfb.h +++ b/include/video/s1d13xxxfb.h @@ -14,12 +14,16 @@ #define S1D13XXXFB_H #define S1D_PALETTE_SIZE 256 -#define S1D_CHIP_REV 7 /* expected chip revision number for s1d13806 */ -#define S1D_FBID "S1D13806" -#define S1D_DEVICENAME "s1d13806fb" +#define S1D_FBID "S1D13xxx" +#define S1D_DEVICENAME "s1d13xxxfb" + +/* S1DREG_REV_CODE register = prod_id (6 bits) + revision (2 bits) */ +#define S1D13505_PROD_ID 0x3 /* 000011 */ +#define S1D13506_PROD_ID 0x4 /* 000100 */ +#define S1D13806_PROD_ID 0x7 /* 000111 */ /* register definitions (tested on s1d13896) */ -#define S1DREG_REV_CODE 0x0000 /* Revision Code Register */ +#define S1DREG_REV_CODE 0x0000 /* Prod + Rev Code Register */ #define S1DREG_MISC 0x0001 /* Miscellaneous Register */ #define S1DREG_GPIO_CNF0 0x0004 /* General IO Pins Configuration Register 0 */ #define S1DREG_GPIO_CNF1 0x0005 /* General IO Pins Configuration Register 1 */ @@ -132,6 +136,9 @@ #define S1DREG_DELAYOFF 0xFFFE #define S1DREG_DELAYON 0xFFFF +#define BBLT_SOLID_FILL 0x0c + + /* Note: all above defines should go in separate header files when implementing other S1D13xxx chip support. */ @@ -140,10 +147,11 @@ struct s1d13xxxfb_regval { u8 value; }; - struct s1d13xxxfb_par { void __iomem *regs; unsigned char display; + unsigned char prod_id; + unsigned char revision; unsigned int pseudo_palette[16]; #ifdef CONFIG_PM diff --git a/include/video/sa1100fb.h b/include/video/sa1100fb.h new file mode 100644 index 00000000000..4ab40965378 --- /dev/null +++ b/include/video/sa1100fb.h @@ -0,0 +1,63 @@ +/* + * StrongARM 1100 LCD Controller Frame Buffer Device + * + * Copyright (C) 1999 Eric A. Thomas + * Based on acornfb.c Copyright (C) Russell King. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ +#ifndef _VIDEO_SA1100FB_H +#define _VIDEO_SA1100FB_H + +#include <linux/fb.h> +#include <linux/types.h> + +#define RGB_4 0 +#define RGB_8 1 +#define RGB_16 2 +#define NR_RGB 3 + +/* These are the bitfields for each display depth that we support. */ +struct sa1100fb_rgb { + struct fb_bitfield red; + struct fb_bitfield green; + struct fb_bitfield blue; + struct fb_bitfield transp; +}; + +/* This structure describes the machine which we are running on. */ +struct sa1100fb_mach_info { + u_long pixclock; + + u_short xres; + u_short yres; + + u_char bpp; + u_char hsync_len; + u_char left_margin; + u_char right_margin; + + u_char vsync_len; + u_char upper_margin; + u_char lower_margin; + u_char sync; + + u_int cmap_greyscale:1, + cmap_inverse:1, + cmap_static:1, + unused:29; + + u_int lccr0; + u_int lccr3; + + /* Overrides for the default RGB maps */ + const struct sa1100fb_rgb *rgb[NR_RGB]; + + void (*backlight_power)(int); + void (*lcd_power)(int); + void (*set_visual)(u32); +}; + +#endif diff --git a/include/video/samsung_fimd.h b/include/video/samsung_fimd.h new file mode 100644 index 00000000000..b0393209679 --- /dev/null +++ b/include/video/samsung_fimd.h @@ -0,0 +1,464 @@ +/* include/video/samsung_fimd.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C Platform - new-style fimd and framebuffer register definitions + * + * This is the register set for the fimd and new style framebuffer interface + * found from the S3C2443 onwards into the S3C2416, S3C2450, the + * S3C64XX series such as the S3C6400 and S3C6410, and EXYNOS series. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* VIDCON0 */ + +#define VIDCON0 0x00 +#define VIDCON0_INTERLACE (1 << 29) +#define VIDCON0_VIDOUT_MASK (0x7 << 26) +#define VIDCON0_VIDOUT_SHIFT 26 +#define VIDCON0_VIDOUT_RGB (0x0 << 26) +#define VIDCON0_VIDOUT_TV (0x1 << 26) +#define VIDCON0_VIDOUT_I80_LDI0 (0x2 << 26) +#define VIDCON0_VIDOUT_I80_LDI1 (0x3 << 26) +#define VIDCON0_VIDOUT_WB_RGB (0x4 << 26) +#define VIDCON0_VIDOUT_WB_I80_LDI0 (0x6 << 26) +#define VIDCON0_VIDOUT_WB_I80_LDI1 (0x7 << 26) + +#define VIDCON0_L1_DATA_MASK (0x7 << 23) +#define VIDCON0_L1_DATA_SHIFT 23 +#define VIDCON0_L1_DATA_16BPP (0x0 << 23) +#define VIDCON0_L1_DATA_18BPP16 (0x1 << 23) +#define VIDCON0_L1_DATA_18BPP9 (0x2 << 23) +#define VIDCON0_L1_DATA_24BPP (0x3 << 23) +#define VIDCON0_L1_DATA_18BPP (0x4 << 23) +#define VIDCON0_L1_DATA_16BPP8 (0x5 << 23) + +#define VIDCON0_L0_DATA_MASK (0x7 << 20) +#define VIDCON0_L0_DATA_SHIFT 20 +#define VIDCON0_L0_DATA_16BPP (0x0 << 20) +#define VIDCON0_L0_DATA_18BPP16 (0x1 << 20) +#define VIDCON0_L0_DATA_18BPP9 (0x2 << 20) +#define VIDCON0_L0_DATA_24BPP (0x3 << 20) +#define VIDCON0_L0_DATA_18BPP (0x4 << 20) +#define VIDCON0_L0_DATA_16BPP8 (0x5 << 20) + +#define VIDCON0_PNRMODE_MASK (0x3 << 17) +#define VIDCON0_PNRMODE_SHIFT 17 +#define VIDCON0_PNRMODE_RGB (0x0 << 17) +#define VIDCON0_PNRMODE_BGR (0x1 << 17) +#define VIDCON0_PNRMODE_SERIAL_RGB (0x2 << 17) +#define VIDCON0_PNRMODE_SERIAL_BGR (0x3 << 17) + +#define VIDCON0_CLKVALUP (1 << 16) +#define VIDCON0_CLKVAL_F_MASK (0xff << 6) +#define VIDCON0_CLKVAL_F_SHIFT 6 +#define VIDCON0_CLKVAL_F_LIMIT 0xff +#define VIDCON0_CLKVAL_F(_x) ((_x) << 6) +#define VIDCON0_VLCKFREE (1 << 5) +#define VIDCON0_CLKDIR (1 << 4) + +#define VIDCON0_CLKSEL_MASK (0x3 << 2) +#define VIDCON0_CLKSEL_SHIFT 2 +#define VIDCON0_CLKSEL_HCLK (0x0 << 2) +#define VIDCON0_CLKSEL_LCD (0x1 << 2) +#define VIDCON0_CLKSEL_27M (0x3 << 2) + +#define VIDCON0_ENVID (1 << 1) +#define VIDCON0_ENVID_F (1 << 0) + +#define VIDCON1 0x04 +#define VIDCON1_LINECNT_MASK (0x7ff << 16) +#define VIDCON1_LINECNT_SHIFT 16 +#define VIDCON1_LINECNT_GET(_v) (((_v) >> 16) & 0x7ff) +#define VIDCON1_FSTATUS_EVEN (1 << 15) +#define VIDCON1_VSTATUS_MASK (0x3 << 13) +#define VIDCON1_VSTATUS_SHIFT 13 +#define VIDCON1_VSTATUS_VSYNC (0x0 << 13) +#define VIDCON1_VSTATUS_BACKPORCH (0x1 << 13) +#define VIDCON1_VSTATUS_ACTIVE (0x2 << 13) +#define VIDCON1_VSTATUS_FRONTPORCH (0x3 << 13) +#define VIDCON1_VCLK_MASK (0x3 << 9) +#define VIDCON1_VCLK_HOLD (0x0 << 9) +#define VIDCON1_VCLK_RUN (0x1 << 9) + +#define VIDCON1_INV_VCLK (1 << 7) +#define VIDCON1_INV_HSYNC (1 << 6) +#define VIDCON1_INV_VSYNC (1 << 5) +#define VIDCON1_INV_VDEN (1 << 4) + +/* VIDCON2 */ + +#define VIDCON2 0x08 +#define VIDCON2_EN601 (1 << 23) +#define VIDCON2_TVFMTSEL_SW (1 << 14) + +#define VIDCON2_TVFMTSEL1_MASK (0x3 << 12) +#define VIDCON2_TVFMTSEL1_SHIFT 12 +#define VIDCON2_TVFMTSEL1_RGB (0x0 << 12) +#define VIDCON2_TVFMTSEL1_YUV422 (0x1 << 12) +#define VIDCON2_TVFMTSEL1_YUV444 (0x2 << 12) + +#define VIDCON2_ORGYCbCr (1 << 8) +#define VIDCON2_YUVORDCrCb (1 << 7) + +/* PRTCON (S3C6410, S5PC100) + * Might not be present in the S3C6410 documentation, + * but tests prove it's there almost for sure; shouldn't hurt in any case. + */ +#define PRTCON 0x0c +#define PRTCON_PROTECT (1 << 11) + +/* VIDTCON0 */ + +#define VIDTCON0 0x10 +#define VIDTCON0_VBPDE_MASK (0xff << 24) +#define VIDTCON0_VBPDE_SHIFT 24 +#define VIDTCON0_VBPDE_LIMIT 0xff +#define VIDTCON0_VBPDE(_x) ((_x) << 24) + +#define VIDTCON0_VBPD_MASK (0xff << 16) +#define VIDTCON0_VBPD_SHIFT 16 +#define VIDTCON0_VBPD_LIMIT 0xff +#define VIDTCON0_VBPD(_x) ((_x) << 16) + +#define VIDTCON0_VFPD_MASK (0xff << 8) +#define VIDTCON0_VFPD_SHIFT 8 +#define VIDTCON0_VFPD_LIMIT 0xff +#define VIDTCON0_VFPD(_x) ((_x) << 8) + +#define VIDTCON0_VSPW_MASK (0xff << 0) +#define VIDTCON0_VSPW_SHIFT 0 +#define VIDTCON0_VSPW_LIMIT 0xff +#define VIDTCON0_VSPW(_x) ((_x) << 0) + +/* VIDTCON1 */ + +#define VIDTCON1 0x14 +#define VIDTCON1_VFPDE_MASK (0xff << 24) +#define VIDTCON1_VFPDE_SHIFT 24 +#define VIDTCON1_VFPDE_LIMIT 0xff +#define VIDTCON1_VFPDE(_x) ((_x) << 24) + +#define VIDTCON1_HBPD_MASK (0xff << 16) +#define VIDTCON1_HBPD_SHIFT 16 +#define VIDTCON1_HBPD_LIMIT 0xff +#define VIDTCON1_HBPD(_x) ((_x) << 16) + +#define VIDTCON1_HFPD_MASK (0xff << 8) +#define VIDTCON1_HFPD_SHIFT 8 +#define VIDTCON1_HFPD_LIMIT 0xff +#define VIDTCON1_HFPD(_x) ((_x) << 8) + +#define VIDTCON1_HSPW_MASK (0xff << 0) +#define VIDTCON1_HSPW_SHIFT 0 +#define VIDTCON1_HSPW_LIMIT 0xff +#define VIDTCON1_HSPW(_x) ((_x) << 0) + +#define VIDTCON2 0x18 +#define VIDTCON2_LINEVAL_E(_x) ((((_x) & 0x800) >> 11) << 23) +#define VIDTCON2_LINEVAL_MASK (0x7ff << 11) +#define VIDTCON2_LINEVAL_SHIFT 11 +#define VIDTCON2_LINEVAL_LIMIT 0x7ff +#define VIDTCON2_LINEVAL(_x) (((_x) & 0x7ff) << 11) + +#define VIDTCON2_HOZVAL_E(_x) ((((_x) & 0x800) >> 11) << 22) +#define VIDTCON2_HOZVAL_MASK (0x7ff << 0) +#define VIDTCON2_HOZVAL_SHIFT 0 +#define VIDTCON2_HOZVAL_LIMIT 0x7ff +#define VIDTCON2_HOZVAL(_x) (((_x) & 0x7ff) << 0) + +/* WINCONx */ + +#define WINCON(_win) (0x20 + ((_win) * 4)) +#define WINCONx_CSCCON_EQ601 (0x0 << 28) +#define WINCONx_CSCCON_EQ709 (0x1 << 28) +#define WINCONx_CSCWIDTH_MASK (0x3 << 26) +#define WINCONx_CSCWIDTH_SHIFT 26 +#define WINCONx_CSCWIDTH_WIDE (0x0 << 26) +#define WINCONx_CSCWIDTH_NARROW (0x3 << 26) +#define WINCONx_ENLOCAL (1 << 22) +#define WINCONx_BUFSTATUS (1 << 21) +#define WINCONx_BUFSEL (1 << 20) +#define WINCONx_BUFAUTOEN (1 << 19) +#define WINCONx_BITSWP (1 << 18) +#define WINCONx_BYTSWP (1 << 17) +#define WINCONx_HAWSWP (1 << 16) +#define WINCONx_WSWP (1 << 15) +#define WINCONx_YCbCr (1 << 13) +#define WINCONx_BURSTLEN_MASK (0x3 << 9) +#define WINCONx_BURSTLEN_SHIFT 9 +#define WINCONx_BURSTLEN_16WORD (0x0 << 9) +#define WINCONx_BURSTLEN_8WORD (0x1 << 9) +#define WINCONx_BURSTLEN_4WORD (0x2 << 9) +#define WINCONx_ENWIN (1 << 0) + +#define WINCON0_BPPMODE_MASK (0xf << 2) +#define WINCON0_BPPMODE_SHIFT 2 +#define WINCON0_BPPMODE_1BPP (0x0 << 2) +#define WINCON0_BPPMODE_2BPP (0x1 << 2) +#define WINCON0_BPPMODE_4BPP (0x2 << 2) +#define WINCON0_BPPMODE_8BPP_PALETTE (0x3 << 2) +#define WINCON0_BPPMODE_16BPP_565 (0x5 << 2) +#define WINCON0_BPPMODE_16BPP_1555 (0x7 << 2) +#define WINCON0_BPPMODE_18BPP_666 (0x8 << 2) +#define WINCON0_BPPMODE_24BPP_888 (0xb << 2) + +#define WINCON1_LOCALSEL_CAMIF (1 << 23) +#define WINCON1_BLD_PIX (1 << 6) +#define WINCON1_BPPMODE_MASK (0xf << 2) +#define WINCON1_BPPMODE_SHIFT 2 +#define WINCON1_BPPMODE_1BPP (0x0 << 2) +#define WINCON1_BPPMODE_2BPP (0x1 << 2) +#define WINCON1_BPPMODE_4BPP (0x2 << 2) +#define WINCON1_BPPMODE_8BPP_PALETTE (0x3 << 2) +#define WINCON1_BPPMODE_8BPP_1232 (0x4 << 2) +#define WINCON1_BPPMODE_16BPP_565 (0x5 << 2) +#define WINCON1_BPPMODE_16BPP_A1555 (0x6 << 2) +#define WINCON1_BPPMODE_16BPP_I1555 (0x7 << 2) +#define WINCON1_BPPMODE_18BPP_666 (0x8 << 2) +#define WINCON1_BPPMODE_18BPP_A1665 (0x9 << 2) +#define WINCON1_BPPMODE_19BPP_A1666 (0xa << 2) +#define WINCON1_BPPMODE_24BPP_888 (0xb << 2) +#define WINCON1_BPPMODE_24BPP_A1887 (0xc << 2) +#define WINCON1_BPPMODE_25BPP_A1888 (0xd << 2) +#define WINCON1_BPPMODE_28BPP_A4888 (0xd << 2) +#define WINCON1_ALPHA_SEL (1 << 1) + +/* S5PV210 */ +#define SHADOWCON 0x34 +#define SHADOWCON_WINx_PROTECT(_win) (1 << (10 + (_win))) +/* DMA channels (all windows) */ +#define SHADOWCON_CHx_ENABLE(_win) (1 << (_win)) +/* Local input channels (windows 0-2) */ +#define SHADOWCON_CHx_LOCAL_ENABLE(_win) (1 << (5 + (_win))) + +/* VIDOSDx */ + +#define VIDOSD_BASE 0x40 +#define VIDOSDxA_TOPLEFT_X_E(_x) ((((_x) & 0x800) >> 11) << 23) +#define VIDOSDxA_TOPLEFT_X_MASK (0x7ff << 11) +#define VIDOSDxA_TOPLEFT_X_SHIFT 11 +#define VIDOSDxA_TOPLEFT_X_LIMIT 0x7ff +#define VIDOSDxA_TOPLEFT_X(_x) (((_x) & 0x7ff) << 11) + +#define VIDOSDxA_TOPLEFT_Y_E(_x) ((((_x) & 0x800) >> 11) << 22) +#define VIDOSDxA_TOPLEFT_Y_MASK (0x7ff << 0) +#define VIDOSDxA_TOPLEFT_Y_SHIFT 0 +#define VIDOSDxA_TOPLEFT_Y_LIMIT 0x7ff +#define VIDOSDxA_TOPLEFT_Y(_x) (((_x) & 0x7ff) << 0) + +#define VIDOSDxB_BOTRIGHT_X_E(_x) ((((_x) & 0x800) >> 11) << 23) +#define VIDOSDxB_BOTRIGHT_X_MASK (0x7ff << 11) +#define VIDOSDxB_BOTRIGHT_X_SHIFT 11 +#define VIDOSDxB_BOTRIGHT_X_LIMIT 0x7ff +#define VIDOSDxB_BOTRIGHT_X(_x) (((_x) & 0x7ff) << 11) + +#define VIDOSDxB_BOTRIGHT_Y_E(_x) ((((_x) & 0x800) >> 11) << 22) +#define VIDOSDxB_BOTRIGHT_Y_MASK (0x7ff << 0) +#define VIDOSDxB_BOTRIGHT_Y_SHIFT 0 +#define VIDOSDxB_BOTRIGHT_Y_LIMIT 0x7ff +#define VIDOSDxB_BOTRIGHT_Y(_x) (((_x) & 0x7ff) << 0) + +/* For VIDOSD[1..4]C */ +#define VIDISD14C_ALPHA0_R(_x) ((_x) << 20) +#define VIDISD14C_ALPHA0_G_MASK (0xf << 16) +#define VIDISD14C_ALPHA0_G_SHIFT 16 +#define VIDISD14C_ALPHA0_G_LIMIT 0xf +#define VIDISD14C_ALPHA0_G(_x) ((_x) << 16) +#define VIDISD14C_ALPHA0_B_MASK (0xf << 12) +#define VIDISD14C_ALPHA0_B_SHIFT 12 +#define VIDISD14C_ALPHA0_B_LIMIT 0xf +#define VIDISD14C_ALPHA0_B(_x) ((_x) << 12) +#define VIDISD14C_ALPHA1_R_MASK (0xf << 8) +#define VIDISD14C_ALPHA1_R_SHIFT 8 +#define VIDISD14C_ALPHA1_R_LIMIT 0xf +#define VIDISD14C_ALPHA1_R(_x) ((_x) << 8) +#define VIDISD14C_ALPHA1_G_MASK (0xf << 4) +#define VIDISD14C_ALPHA1_G_SHIFT 4 +#define VIDISD14C_ALPHA1_G_LIMIT 0xf +#define VIDISD14C_ALPHA1_G(_x) ((_x) << 4) +#define VIDISD14C_ALPHA1_B_MASK (0xf << 0) +#define VIDISD14C_ALPHA1_B_SHIFT 0 +#define VIDISD14C_ALPHA1_B_LIMIT 0xf +#define VIDISD14C_ALPHA1_B(_x) ((_x) << 0) + +/* Video buffer addresses */ +#define VIDW_BUF_START(_buff) (0xA0 + ((_buff) * 8)) +#define VIDW_BUF_START1(_buff) (0xA4 + ((_buff) * 8)) +#define VIDW_BUF_END(_buff) (0xD0 + ((_buff) * 8)) +#define VIDW_BUF_END1(_buff) (0xD4 + ((_buff) * 8)) +#define VIDW_BUF_SIZE(_buff) (0x100 + ((_buff) * 4)) + +#define VIDW_BUF_SIZE_OFFSET_E(_x) ((((_x) & 0x2000) >> 13) << 27) +#define VIDW_BUF_SIZE_OFFSET_MASK (0x1fff << 13) +#define VIDW_BUF_SIZE_OFFSET_SHIFT 13 +#define VIDW_BUF_SIZE_OFFSET_LIMIT 0x1fff +#define VIDW_BUF_SIZE_OFFSET(_x) (((_x) & 0x1fff) << 13) + +#define VIDW_BUF_SIZE_PAGEWIDTH_E(_x) ((((_x) & 0x2000) >> 13) << 26) +#define VIDW_BUF_SIZE_PAGEWIDTH_MASK (0x1fff << 0) +#define VIDW_BUF_SIZE_PAGEWIDTH_SHIFT 0 +#define VIDW_BUF_SIZE_PAGEWIDTH_LIMIT 0x1fff +#define VIDW_BUF_SIZE_PAGEWIDTH(_x) (((_x) & 0x1fff) << 0) + +/* Interrupt controls and status */ + +#define VIDINTCON0 0x130 +#define VIDINTCON0_FIFOINTERVAL_MASK (0x3f << 20) +#define VIDINTCON0_FIFOINTERVAL_SHIFT 20 +#define VIDINTCON0_FIFOINTERVAL_LIMIT 0x3f +#define VIDINTCON0_FIFOINTERVAL(_x) ((_x) << 20) + +#define VIDINTCON0_INT_SYSMAINCON (1 << 19) +#define VIDINTCON0_INT_SYSSUBCON (1 << 18) +#define VIDINTCON0_INT_I80IFDONE (1 << 17) + +#define VIDINTCON0_FRAMESEL0_MASK (0x3 << 15) +#define VIDINTCON0_FRAMESEL0_SHIFT 15 +#define VIDINTCON0_FRAMESEL0_BACKPORCH (0x0 << 15) +#define VIDINTCON0_FRAMESEL0_VSYNC (0x1 << 15) +#define VIDINTCON0_FRAMESEL0_ACTIVE (0x2 << 15) +#define VIDINTCON0_FRAMESEL0_FRONTPORCH (0x3 << 15) + +#define VIDINTCON0_FRAMESEL1 (1 << 13) +#define VIDINTCON0_FRAMESEL1_MASK (0x3 << 13) +#define VIDINTCON0_FRAMESEL1_NONE (0x0 << 13) +#define VIDINTCON0_FRAMESEL1_BACKPORCH (0x1 << 13) +#define VIDINTCON0_FRAMESEL1_VSYNC (0x2 << 13) +#define VIDINTCON0_FRAMESEL1_FRONTPORCH (0x3 << 13) + +#define VIDINTCON0_INT_FRAME (1 << 12) +#define VIDINTCON0_FIFIOSEL_MASK (0x7f << 5) +#define VIDINTCON0_FIFIOSEL_SHIFT 5 +#define VIDINTCON0_FIFIOSEL_WINDOW0 (0x1 << 5) +#define VIDINTCON0_FIFIOSEL_WINDOW1 (0x2 << 5) +#define VIDINTCON0_FIFIOSEL_WINDOW2 (0x10 << 5) +#define VIDINTCON0_FIFIOSEL_WINDOW3 (0x20 << 5) +#define VIDINTCON0_FIFIOSEL_WINDOW4 (0x40 << 5) + +#define VIDINTCON0_FIFOLEVEL_MASK (0x7 << 2) +#define VIDINTCON0_FIFOLEVEL_SHIFT 2 +#define VIDINTCON0_FIFOLEVEL_TO25PC (0x0 << 2) +#define VIDINTCON0_FIFOLEVEL_TO50PC (0x1 << 2) +#define VIDINTCON0_FIFOLEVEL_TO75PC (0x2 << 2) +#define VIDINTCON0_FIFOLEVEL_EMPTY (0x3 << 2) +#define VIDINTCON0_FIFOLEVEL_FULL (0x4 << 2) + +#define VIDINTCON0_INT_FIFO_MASK (0x3 << 0) +#define VIDINTCON0_INT_FIFO_SHIFT 0 +#define VIDINTCON0_INT_ENABLE (1 << 0) + +#define VIDINTCON1 0x134 +#define VIDINTCON1_INT_I180 (1 << 2) +#define VIDINTCON1_INT_FRAME (1 << 1) +#define VIDINTCON1_INT_FIFO (1 << 0) + +/* Window colour-key control registers */ +#define WKEYCON 0x140 + +#define WKEYCON0 0x00 +#define WKEYCON1 0x04 + +#define WxKEYCON0_KEYBL_EN (1 << 26) +#define WxKEYCON0_KEYEN_F (1 << 25) +#define WxKEYCON0_DIRCON (1 << 24) +#define WxKEYCON0_COMPKEY_MASK (0xffffff << 0) +#define WxKEYCON0_COMPKEY_SHIFT 0 +#define WxKEYCON0_COMPKEY_LIMIT 0xffffff +#define WxKEYCON0_COMPKEY(_x) ((_x) << 0) +#define WxKEYCON1_COLVAL_MASK (0xffffff << 0) +#define WxKEYCON1_COLVAL_SHIFT 0 +#define WxKEYCON1_COLVAL_LIMIT 0xffffff +#define WxKEYCON1_COLVAL(_x) ((_x) << 0) + +/* Dithering control */ +#define DITHMODE 0x170 +#define DITHMODE_R_POS_MASK (0x3 << 5) +#define DITHMODE_R_POS_SHIFT 5 +#define DITHMODE_R_POS_8BIT (0x0 << 5) +#define DITHMODE_R_POS_6BIT (0x1 << 5) +#define DITHMODE_R_POS_5BIT (0x2 << 5) +#define DITHMODE_G_POS_MASK (0x3 << 3) +#define DITHMODE_G_POS_SHIFT 3 +#define DITHMODE_G_POS_8BIT (0x0 << 3) +#define DITHMODE_G_POS_6BIT (0x1 << 3) +#define DITHMODE_G_POS_5BIT (0x2 << 3) +#define DITHMODE_B_POS_MASK (0x3 << 1) +#define DITHMODE_B_POS_SHIFT 1 +#define DITHMODE_B_POS_8BIT (0x0 << 1) +#define DITHMODE_B_POS_6BIT (0x1 << 1) +#define DITHMODE_B_POS_5BIT (0x2 << 1) +#define DITHMODE_DITH_EN (1 << 0) + +/* Window blanking (MAP) */ +#define WINxMAP(_win) (0x180 + ((_win) * 4)) +#define WINxMAP_MAP (1 << 24) +#define WINxMAP_MAP_COLOUR_MASK (0xffffff << 0) +#define WINxMAP_MAP_COLOUR_SHIFT 0 +#define WINxMAP_MAP_COLOUR_LIMIT 0xffffff +#define WINxMAP_MAP_COLOUR(_x) ((_x) << 0) + +/* Winodw palette control */ +#define WPALCON 0x1A0 +#define WPALCON_PAL_UPDATE (1 << 9) +#define WPALCON_W4PAL_16BPP_A555 (1 << 8) +#define WPALCON_W3PAL_16BPP_A555 (1 << 7) +#define WPALCON_W2PAL_16BPP_A555 (1 << 6) +#define WPALCON_W1PAL_MASK (0x7 << 3) +#define WPALCON_W1PAL_SHIFT 3 +#define WPALCON_W1PAL_25BPP_A888 (0x0 << 3) +#define WPALCON_W1PAL_24BPP (0x1 << 3) +#define WPALCON_W1PAL_19BPP_A666 (0x2 << 3) +#define WPALCON_W1PAL_18BPP_A665 (0x3 << 3) +#define WPALCON_W1PAL_18BPP (0x4 << 3) +#define WPALCON_W1PAL_16BPP_A555 (0x5 << 3) +#define WPALCON_W1PAL_16BPP_565 (0x6 << 3) +#define WPALCON_W0PAL_MASK (0x7 << 0) +#define WPALCON_W0PAL_SHIFT 0 +#define WPALCON_W0PAL_25BPP_A888 (0x0 << 0) +#define WPALCON_W0PAL_24BPP (0x1 << 0) +#define WPALCON_W0PAL_19BPP_A666 (0x2 << 0) +#define WPALCON_W0PAL_18BPP_A665 (0x3 << 0) +#define WPALCON_W0PAL_18BPP (0x4 << 0) +#define WPALCON_W0PAL_16BPP_A555 (0x5 << 0) +#define WPALCON_W0PAL_16BPP_565 (0x6 << 0) + +/* Blending equation control */ +#define BLENDCON 0x260 +#define BLENDCON_NEW_MASK (1 << 0) +#define BLENDCON_NEW_8BIT_ALPHA_VALUE (1 << 0) +#define BLENDCON_NEW_4BIT_ALPHA_VALUE (0 << 0) + +/* Notes on per-window bpp settings + * + * Value Win0 Win1 Win2 Win3 Win 4 + * 0000 1(P) 1(P) 1(P) 1(P) 1(P) + * 0001 2(P) 2(P) 2(P) 2(P) 2(P) + * 0010 4(P) 4(P) 4(P) 4(P) -none- + * 0011 8(P) 8(P) -none- -none- -none- + * 0100 -none- 8(A232) 8(A232) -none- -none- + * 0101 16(565) 16(565) 16(565) 16(565) 16(565) + * 0110 -none- 16(A555) 16(A555) 16(A555) 16(A555) + * 0111 16(I555) 16(I565) 16(I555) 16(I555) 16(I555) + * 1000 18(666) 18(666) 18(666) 18(666) 18(666) + * 1001 -none- 18(A665) 18(A665) 18(A665) 16(A665) + * 1010 -none- 19(A666) 19(A666) 19(A666) 19(A666) + * 1011 24(888) 24(888) 24(888) 24(888) 24(888) + * 1100 -none- 24(A887) 24(A887) 24(A887) 24(A887) + * 1101 -none- 25(A888) 25(A888) 25(A888) 25(A888) + * 1110 -none- -none- -none- -none- -none- + * 1111 -none- -none- -none- -none- -none- +*/ + +/* FIMD Version 8 register offset definitions */ +#define FIMD_V8_VIDTCON0 0x20010 +#define FIMD_V8_VIDTCON1 0x20014 +#define FIMD_V8_VIDTCON2 0x20018 +#define FIMD_V8_VIDTCON3 0x2001C +#define FIMD_V8_VIDCON1 0x20004 diff --git a/include/video/sgivw.h b/include/video/sgivw.h deleted file mode 100644 index 55f2a7c024a..00000000000 --- a/include/video/sgivw.h +++ /dev/null @@ -1,682 +0,0 @@ -/* - * linux/drivers/video/sgivw.h -- SGI DBE frame buffer device header - * - * Copyright (C) 1999 Silicon Graphics, Inc. - * Jeffrey Newquist, newquist@engr.sgi.som - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -#ifndef __SGIVWFB_H__ -#define __SGIVWFB_H__ - -#define DBE_GETREG(reg, dest) ((dest) = DBE_REG_BASE->reg) -#define DBE_SETREG(reg, src) DBE_REG_BASE->reg = (src) -#define DBE_IGETREG(reg, idx, dest) ((dest) = DBE_REG_BASE->reg[idx]) -#define DBE_ISETREG(reg, idx, src) (DBE_REG_BASE->reg[idx] = (src)) - -#define MASK(msb, lsb) ( (((u32)1<<((msb)-(lsb)+1))-1) << (lsb) ) -#define GET(v, msb, lsb) ( ((u32)(v) & MASK(msb,lsb)) >> (lsb) ) -#define SET(v, f, msb, lsb) ( (v) = ((v)&~MASK(msb,lsb)) | (( (u32)(f)<<(lsb) ) & MASK(msb,lsb)) ) - -#define GET_DBE_FIELD(reg, field, v) GET((v), DBE_##reg##_##field##_MSB, DBE_##reg##_##field##_LSB) -#define SET_DBE_FIELD(reg, field, v, f) SET((v), (f), DBE_##reg##_##field##_MSB, DBE_##reg##_##field##_LSB) - -/* NOTE: All loads/stores must be 32 bits and uncached */ - -#define DBE_REG_PHYS 0xd0000000 -#define DBE_REG_SIZE 0x01000000 - -struct asregs { - volatile u32 ctrlstat; /* 0x000000 general control */ - volatile u32 dotclock; /* 0x000004 dot clock PLL control */ - volatile u32 i2c; /* 0x000008 crt I2C control */ - volatile u32 sysclk; /* 0x00000c system clock PLL control */ - volatile u32 i2cfp; /* 0x000010 flat panel I2C control */ - volatile u32 id; /* 0x000014 device id/chip revision */ - volatile u32 config; /* 0x000018 power on configuration */ - volatile u32 bist; /* 0x00001c internal bist status */ - - char _pad0[ 0x010000 - 0x000020 ]; - - volatile u32 vt_xy; /* 0x010000 current dot coords */ - volatile u32 vt_xymax; /* 0x010004 maximum dot coords */ - volatile u32 vt_vsync; /* 0x010008 vsync on/off */ - volatile u32 vt_hsync; /* 0x01000c hsync on/off */ - volatile u32 vt_vblank; /* 0x010010 vblank on/off */ - volatile u32 vt_hblank; /* 0x010014 hblank on/off */ - volatile u32 vt_flags; /* 0x010018 polarity of vt signals */ - volatile u32 vt_f2rf_lock; /* 0x01001c f2rf & framelck y coord */ - volatile u32 vt_intr01; /* 0x010020 intr 0,1 y coords */ - volatile u32 vt_intr23; /* 0x010024 intr 2,3 y coords */ - volatile u32 fp_hdrv; /* 0x010028 flat panel hdrv on/off */ - volatile u32 fp_vdrv; /* 0x01002c flat panel vdrv on/off */ - volatile u32 fp_de; /* 0x010030 flat panel de on/off */ - volatile u32 vt_hpixen; /* 0x010034 intrnl horiz pixel on/off*/ - volatile u32 vt_vpixen; /* 0x010038 intrnl vert pixel on/off */ - volatile u32 vt_hcmap; /* 0x01003c cmap write (horiz) */ - volatile u32 vt_vcmap; /* 0x010040 cmap write (vert) */ - volatile u32 did_start_xy; /* 0x010044 eol/f did/xy reset val */ - volatile u32 crs_start_xy; /* 0x010048 eol/f crs/xy reset val */ - volatile u32 vc_start_xy; /* 0x01004c eol/f vc/xy reset val */ - - char _pad1[ 0x020000 - 0x010050 ]; - - volatile u32 ovr_width_tile; /* 0x020000 overlay plane ctrl 0 */ - volatile u32 ovr_inhwctrl; /* 0x020004 overlay plane ctrl 1 */ - volatile u32 ovr_control; /* 0x020008 overlay plane ctrl 1 */ - - char _pad2[ 0x030000 - 0x02000C ]; - - volatile u32 frm_size_tile; /* 0x030000 normal plane ctrl 0 */ - volatile u32 frm_size_pixel; /* 0x030004 normal plane ctrl 1 */ - volatile u32 frm_inhwctrl; /* 0x030008 normal plane ctrl 2 */ - volatile u32 frm_control; /* 0x03000C normal plane ctrl 3 */ - - char _pad3[ 0x040000 - 0x030010 ]; - - volatile u32 did_inhwctrl; /* 0x040000 DID control */ - volatile u32 did_control; /* 0x040004 DID shadow */ - - char _pad4[ 0x048000 - 0x040008 ]; - - volatile u32 mode_regs[32]; /* 0x048000 - 0x04807c WID table */ - - char _pad5[ 0x050000 - 0x048080 ]; - - volatile u32 cmap[6144]; /* 0x050000 - 0x055ffc color map */ - - char _pad6[ 0x058000 - 0x056000 ]; - - volatile u32 cm_fifo; /* 0x058000 color map fifo status */ - - char _pad7[ 0x060000 - 0x058004 ]; - - volatile u32 gmap[256]; /* 0x060000 - 0x0603fc gamma map */ - - char _pad8[ 0x068000 - 0x060400 ]; - - volatile u32 gmap10[1024]; /* 0x068000 - 0x068ffc gamma map */ - - char _pad9[ 0x070000 - 0x069000 ]; - - volatile u32 crs_pos; /* 0x070000 cusror control 0 */ - volatile u32 crs_ctl; /* 0x070004 cusror control 1 */ - volatile u32 crs_cmap[3]; /* 0x070008 - 0x070010 crs cmap */ - - char _pad10[ 0x078000 - 0x070014 ]; - - volatile u32 crs_glyph[64]; /* 0x078000 - 0x0780fc crs glyph */ - - char _pad11[ 0x080000 - 0x078100 ]; - - volatile u32 vc_0; /* 0x080000 video capture crtl 0 */ - volatile u32 vc_1; /* 0x080004 video capture crtl 1 */ - volatile u32 vc_2; /* 0x080008 video capture crtl 2 */ - volatile u32 vc_3; /* 0x08000c video capture crtl 3 */ - volatile u32 vc_4; /* 0x080010 video capture crtl 3 */ - volatile u32 vc_5; /* 0x080014 video capture crtl 3 */ - volatile u32 vc_6; /* 0x080018 video capture crtl 3 */ - volatile u32 vc_7; /* 0x08001c video capture crtl 3 */ - volatile u32 vc_8; /* 0x08000c video capture crtl 3 */ -}; - -/* Bit mask information */ - -#define DBE_CTRLSTAT_CHIPID_MSB 3 -#define DBE_CTRLSTAT_CHIPID_LSB 0 -#define DBE_CTRLSTAT_SENSE_N_MSB 4 -#define DBE_CTRLSTAT_SENSE_N_LSB 4 -#define DBE_CTRLSTAT_PCLKSEL_MSB 29 -#define DBE_CTRLSTAT_PCLKSEL_LSB 28 - -#define DBE_DOTCLK_M_MSB 7 -#define DBE_DOTCLK_M_LSB 0 -#define DBE_DOTCLK_N_MSB 13 -#define DBE_DOTCLK_N_LSB 8 -#define DBE_DOTCLK_P_MSB 15 -#define DBE_DOTCLK_P_LSB 14 -#define DBE_DOTCLK_RUN_MSB 20 -#define DBE_DOTCLK_RUN_LSB 20 - -#define DBE_VT_XY_VT_FREEZE_MSB 31 -#define DBE_VT_XY_VT_FREEZE_LSB 31 - -#define DBE_FP_VDRV_FP_VDRV_ON_MSB 23 -#define DBE_FP_VDRV_FP_VDRV_ON_LSB 12 -#define DBE_FP_VDRV_FP_VDRV_OFF_MSB 11 -#define DBE_FP_VDRV_FP_VDRV_OFF_LSB 0 - -#define DBE_FP_HDRV_FP_HDRV_ON_MSB 23 -#define DBE_FP_HDRV_FP_HDRV_ON_LSB 12 -#define DBE_FP_HDRV_FP_HDRV_OFF_MSB 11 -#define DBE_FP_HDRV_FP_HDRV_OFF_LSB 0 - -#define DBE_FP_DE_FP_DE_ON_MSB 23 -#define DBE_FP_DE_FP_DE_ON_LSB 12 -#define DBE_FP_DE_FP_DE_OFF_MSB 11 -#define DBE_FP_DE_FP_DE_OFF_LSB 0 - -#define DBE_VT_VSYNC_VT_VSYNC_ON_MSB 23 -#define DBE_VT_VSYNC_VT_VSYNC_ON_LSB 12 -#define DBE_VT_VSYNC_VT_VSYNC_OFF_MSB 11 -#define DBE_VT_VSYNC_VT_VSYNC_OFF_LSB 0 - -#define DBE_VT_HSYNC_VT_HSYNC_ON_MSB 23 -#define DBE_VT_HSYNC_VT_HSYNC_ON_LSB 12 -#define DBE_VT_HSYNC_VT_HSYNC_OFF_MSB 11 -#define DBE_VT_HSYNC_VT_HSYNC_OFF_LSB 0 - -#define DBE_VT_VBLANK_VT_VBLANK_ON_MSB 23 -#define DBE_VT_VBLANK_VT_VBLANK_ON_LSB 12 -#define DBE_VT_VBLANK_VT_VBLANK_OFF_MSB 11 -#define DBE_VT_VBLANK_VT_VBLANK_OFF_LSB 0 - -#define DBE_VT_HBLANK_VT_HBLANK_ON_MSB 23 -#define DBE_VT_HBLANK_VT_HBLANK_ON_LSB 12 -#define DBE_VT_HBLANK_VT_HBLANK_OFF_MSB 11 -#define DBE_VT_HBLANK_VT_HBLANK_OFF_LSB 0 - -#define DBE_VT_FLAGS_VDRV_INVERT_MSB 0 -#define DBE_VT_FLAGS_VDRV_INVERT_LSB 0 -#define DBE_VT_FLAGS_HDRV_INVERT_MSB 2 -#define DBE_VT_FLAGS_HDRV_INVERT_LSB 2 - -#define DBE_VT_VCMAP_VT_VCMAP_ON_MSB 23 -#define DBE_VT_VCMAP_VT_VCMAP_ON_LSB 12 -#define DBE_VT_VCMAP_VT_VCMAP_OFF_MSB 11 -#define DBE_VT_VCMAP_VT_VCMAP_OFF_LSB 0 - -#define DBE_VT_HCMAP_VT_HCMAP_ON_MSB 23 -#define DBE_VT_HCMAP_VT_HCMAP_ON_LSB 12 -#define DBE_VT_HCMAP_VT_HCMAP_OFF_MSB 11 -#define DBE_VT_HCMAP_VT_HCMAP_OFF_LSB 0 - -#define DBE_VT_XYMAX_VT_MAXX_MSB 11 -#define DBE_VT_XYMAX_VT_MAXX_LSB 0 -#define DBE_VT_XYMAX_VT_MAXY_MSB 23 -#define DBE_VT_XYMAX_VT_MAXY_LSB 12 - -#define DBE_VT_HPIXEN_VT_HPIXEN_ON_MSB 23 -#define DBE_VT_HPIXEN_VT_HPIXEN_ON_LSB 12 -#define DBE_VT_HPIXEN_VT_HPIXEN_OFF_MSB 11 -#define DBE_VT_HPIXEN_VT_HPIXEN_OFF_LSB 0 - -#define DBE_VT_VPIXEN_VT_VPIXEN_ON_MSB 23 -#define DBE_VT_VPIXEN_VT_VPIXEN_ON_LSB 12 -#define DBE_VT_VPIXEN_VT_VPIXEN_OFF_MSB 11 -#define DBE_VT_VPIXEN_VT_VPIXEN_OFF_LSB 0 - -#define DBE_OVR_CONTROL_OVR_DMA_ENABLE_MSB 0 -#define DBE_OVR_CONTROL_OVR_DMA_ENABLE_LSB 0 - -#define DBE_OVR_INHWCTRL_OVR_DMA_ENABLE_MSB 0 -#define DBE_OVR_INHWCTRL_OVR_DMA_ENABLE_LSB 0 - -#define DBE_OVR_WIDTH_TILE_OVR_FIFO_RESET_MSB 13 -#define DBE_OVR_WIDTH_TILE_OVR_FIFO_RESET_LSB 13 - -#define DBE_FRM_CONTROL_FRM_DMA_ENABLE_MSB 0 -#define DBE_FRM_CONTROL_FRM_DMA_ENABLE_LSB 0 -#define DBE_FRM_CONTROL_FRM_TILE_PTR_MSB 31 -#define DBE_FRM_CONTROL_FRM_TILE_PTR_LSB 9 -#define DBE_FRM_CONTROL_FRM_LINEAR_MSB 1 -#define DBE_FRM_CONTROL_FRM_LINEAR_LSB 1 - -#define DBE_FRM_INHWCTRL_FRM_DMA_ENABLE_MSB 0 -#define DBE_FRM_INHWCTRL_FRM_DMA_ENABLE_LSB 0 - -#define DBE_FRM_SIZE_TILE_FRM_WIDTH_TILE_MSB 12 -#define DBE_FRM_SIZE_TILE_FRM_WIDTH_TILE_LSB 5 -#define DBE_FRM_SIZE_TILE_FRM_RHS_MSB 4 -#define DBE_FRM_SIZE_TILE_FRM_RHS_LSB 0 -#define DBE_FRM_SIZE_TILE_FRM_DEPTH_MSB 14 -#define DBE_FRM_SIZE_TILE_FRM_DEPTH_LSB 13 -#define DBE_FRM_SIZE_TILE_FRM_FIFO_RESET_MSB 15 -#define DBE_FRM_SIZE_TILE_FRM_FIFO_RESET_LSB 15 - -#define DBE_FRM_SIZE_PIXEL_FB_HEIGHT_PIX_MSB 31 -#define DBE_FRM_SIZE_PIXEL_FB_HEIGHT_PIX_LSB 16 - -#define DBE_DID_CONTROL_DID_DMA_ENABLE_MSB 0 -#define DBE_DID_CONTROL_DID_DMA_ENABLE_LSB 0 -#define DBE_DID_INHWCTRL_DID_DMA_ENABLE_MSB 0 -#define DBE_DID_INHWCTRL_DID_DMA_ENABLE_LSB 0 - -#define DBE_DID_START_XY_DID_STARTY_MSB 23 -#define DBE_DID_START_XY_DID_STARTY_LSB 12 -#define DBE_DID_START_XY_DID_STARTX_MSB 11 -#define DBE_DID_START_XY_DID_STARTX_LSB 0 - -#define DBE_CRS_START_XY_CRS_STARTY_MSB 23 -#define DBE_CRS_START_XY_CRS_STARTY_LSB 12 -#define DBE_CRS_START_XY_CRS_STARTX_MSB 11 -#define DBE_CRS_START_XY_CRS_STARTX_LSB 0 - -#define DBE_WID_TYP_MSB 4 -#define DBE_WID_TYP_LSB 2 -#define DBE_WID_BUF_MSB 1 -#define DBE_WID_BUF_LSB 0 - -#define DBE_VC_START_XY_VC_STARTY_MSB 23 -#define DBE_VC_START_XY_VC_STARTY_LSB 12 -#define DBE_VC_START_XY_VC_STARTX_MSB 11 -#define DBE_VC_START_XY_VC_STARTX_LSB 0 - -/* Constants */ - -#define DBE_FRM_DEPTH_8 0 -#define DBE_FRM_DEPTH_16 1 -#define DBE_FRM_DEPTH_32 2 - -#define DBE_CMODE_I8 0 -#define DBE_CMODE_I12 1 -#define DBE_CMODE_RG3B2 2 -#define DBE_CMODE_RGB4 3 -#define DBE_CMODE_ARGB5 4 -#define DBE_CMODE_RGB8 5 -#define DBE_CMODE_RGBA5 6 -#define DBE_CMODE_RGB10 7 - -#define DBE_BMODE_BOTH 3 - -#define DBE_CRS_MAGIC 54 - -#define DBE_CLOCK_REF_KHZ 27000 - -/* Config Register (DBE Only) Definitions */ - -#define DBE_CONFIG_VDAC_ENABLE 0x00000001 -#define DBE_CONFIG_VDAC_GSYNC 0x00000002 -#define DBE_CONFIG_VDAC_PBLANK 0x00000004 -#define DBE_CONFIG_FPENABLE 0x00000008 -#define DBE_CONFIG_LENDIAN 0x00000020 -#define DBE_CONFIG_TILEHIST 0x00000040 -#define DBE_CONFIG_EXT_ADDR 0x00000080 - -#define DBE_CONFIG_FBDEV ( DBE_CONFIG_VDAC_ENABLE | \ - DBE_CONFIG_VDAC_GSYNC | \ - DBE_CONFIG_VDAC_PBLANK | \ - DBE_CONFIG_LENDIAN | \ - DBE_CONFIG_EXT_ADDR ) - -/* - * Available Video Timings and Corresponding Indices - */ - -typedef enum { - DBE_VT_640_480_60, - - DBE_VT_800_600_60, - DBE_VT_800_600_75, - DBE_VT_800_600_120, - - DBE_VT_1024_768_50, - DBE_VT_1024_768_60, - DBE_VT_1024_768_75, - DBE_VT_1024_768_85, - DBE_VT_1024_768_120, - - DBE_VT_1280_1024_50, - DBE_VT_1280_1024_60, - DBE_VT_1280_1024_75, - DBE_VT_1280_1024_85, - - DBE_VT_1600_1024_53, - DBE_VT_1600_1024_60, - - DBE_VT_1600_1200_50, - DBE_VT_1600_1200_60, - DBE_VT_1600_1200_75, - - DBE_VT_1920_1080_50, - DBE_VT_1920_1080_60, - DBE_VT_1920_1080_72, - - DBE_VT_1920_1200_50, - DBE_VT_1920_1200_60, - DBE_VT_1920_1200_66, - - DBE_VT_UNKNOWN -} dbe_timing_t; - - - -/* - * Crime Video Timing Data Structure - */ - -struct dbe_timing_info -{ - dbe_timing_t type; - int flags; - short width; /* Monitor resolution */ - short height; - int fields_sec; /* fields/sec (Hz -3 dec. places */ - int cfreq; /* pixel clock frequency (MHz -3 dec. places) */ - short htotal; /* Horizontal total pixels */ - short hblank_start; /* Horizontal blank start */ - short hblank_end; /* Horizontal blank end */ - short hsync_start; /* Horizontal sync start */ - short hsync_end; /* Horizontal sync end */ - short vtotal; /* Vertical total lines */ - short vblank_start; /* Vertical blank start */ - short vblank_end; /* Vertical blank end */ - short vsync_start; /* Vertical sync start */ - short vsync_end; /* Vertical sync end */ - short pll_m; /* PLL M parameter */ - short pll_n; /* PLL P parameter */ - short pll_p; /* PLL N parameter */ -}; - -/* Defines for dbe_vof_info_t flags */ - -#define DBE_VOF_UNKNOWNMON 1 -#define DBE_VOF_STEREO 2 -#define DBE_VOF_DO_GENSYNC 4 /* enable incoming sync */ -#define DBE_VOF_SYNC_ON_GREEN 8 /* sync on green */ -#define DBE_VOF_FLATPANEL 0x1000 /* FLATPANEL Timing */ -#define DBE_VOF_MAGICKEY 0x2000 /* Backdoor key */ - -/* - * DBE Timing Tables - */ - -#ifdef INCLUDE_TIMING_TABLE_DATA -struct dbe_timing_info dbeVTimings[] = { - { - DBE_VT_640_480_60, - /* flags, width, height, fields_sec, cfreq */ - 0, 640, 480, 59940, 25175, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 800, 640, 800, 656, 752, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 525, 480, 525, 490, 492, - /* pll_m, pll_n, pll_p */ - 15, 2, 3 - }, - - { - DBE_VT_800_600_60, - /* flags, width, height, fields_sec, cfreq */ - 0, 800, 600, 60317, 40000, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 1056, 800, 1056, 840, 968, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 628, 600, 628, 601, 605, - /* pll_m, pll_n, pll_p */ - 3, 1, 1 - }, - - { - DBE_VT_800_600_75, - /* flags, width, height, fields_sec, cfreq */ - 0, 800, 600, 75000, 49500, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 1056, 800, 1056, 816, 896, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 625, 600, 625, 601, 604, - /* pll_m, pll_n, pll_p */ - 11, 3, 1 - }, - - { - DBE_VT_800_600_120, - /* flags, width, height, fields_sec, cfreq */ - DBE_VOF_STEREO, 800, 600, 119800, 82978, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 1040, 800, 1040, 856, 976, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 666, 600, 666, 637, 643, - /* pll_m, pll_n, pll_p */ - 31, 5, 1 - }, - - { - DBE_VT_1024_768_50, - /* flags, width, height, fields_sec, cfreq */ - 0, 1024, 768, 50000, 54163, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 1344, 1024, 1344, 1048, 1184, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 806, 768, 806, 771, 777, - /* pll_m, pll_n, pll_p */ - 4, 1, 1 - }, - - { - DBE_VT_1024_768_60, - /* flags, width, height, fields_sec, cfreq */ - 0, 1024, 768, 60004, 65000, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 1344, 1024, 1344, 1048, 1184, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 806, 768, 806, 771, 777, - /* pll_m, pll_n, pll_p */ - 12, 5, 0 - }, - - { - DBE_VT_1024_768_75, - /* flags, width, height, fields_sec, cfreq */ - 0, 1024, 768, 75029, 78750, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 1312, 1024, 1312, 1040, 1136, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 800, 768, 800, 769, 772, - /* pll_m, pll_n, pll_p */ - 29, 5, 1 - }, - - { - DBE_VT_1024_768_85, - /* flags, width, height, fields_sec, cfreq */ - 0, 1024, 768, 84997, 94500, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 1376, 1024, 1376, 1072, 1168, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 808, 768, 808, 769, 772, - /* pll_m, pll_n, pll_p */ - 7, 2, 0 - }, - - { - DBE_VT_1024_768_120, - /* flags, width, height, fields_sec, cfreq */ - DBE_VOF_STEREO, 1024, 768, 119800, 133195, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 1376, 1024, 1376, 1072, 1168, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 808, 768, 808, 769, 772, - /* pll_m, pll_n, pll_p */ - 5, 1, 0 - }, - - { - DBE_VT_1280_1024_50, - /* flags, width, height, fields_sec, cfreq */ - 0, 1280, 1024, 50000, 89460, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 1680, 1280, 1680, 1360, 1480, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 1065, 1024, 1065, 1027, 1030, - /* pll_m, pll_n, pll_p */ - 10, 3, 0 - }, - - { - DBE_VT_1280_1024_60, - /* flags, width, height, fields_sec, cfreq */ - 0, 1280, 1024, 60020, 108000, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 1688, 1280, 1688, 1328, 1440, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 1066, 1024, 1066, 1025, 1028, - /* pll_m, pll_n, pll_p */ - 4, 1, 0 - }, - - { - DBE_VT_1280_1024_75, - /* flags, width, height, fields_sec, cfreq */ - 0, 1280, 1024, 75025, 135000, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 1688, 1280, 1688, 1296, 1440, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 1066, 1024, 1066, 1025, 1028, - /* pll_m, pll_n, pll_p */ - 5, 1, 0 - }, - - { - DBE_VT_1280_1024_85, - /* flags, width, height, fields_sec, cfreq */ - 0, 1280, 1024, 85024, 157500, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 1728, 1280, 1728, 1344, 1504, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 1072, 1024, 1072, 1025, 1028, - /* pll_m, pll_n, pll_p */ - 29, 5, 0 - }, - - { - DBE_VT_1600_1024_53, - /* flags, width, height, fields_sec, cfreq */ - DBE_VOF_FLATPANEL | DBE_VOF_MAGICKEY, - 1600, 1024, 53000, 107447, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 1900, 1600, 1900, 1630, 1730, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 1067, 1024, 1067, 1027, 1030, - /* pll_m, pll_n, pll_p */ - 4, 1, 0 - }, - - { - DBE_VT_1600_1024_60, - /* flags, width, height, fields_sec, cfreq */ - DBE_VOF_FLATPANEL, 1600, 1024, 60000, 106913, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 1670, 1600, 1670, 1630, 1650, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 1067, 1024, 1067, 1027, 1030, - /* pll_m, pll_n, pll_p */ - 4, 1, 0 - }, - - { - DBE_VT_1600_1200_50, - /* flags, width, height, fields_sec, cfreq */ - 0, 1600, 1200, 50000, 130500, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 2088, 1600, 2088, 1644, 1764, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 1250, 1200, 1250, 1205, 1211, - /* pll_m, pll_n, pll_p */ - 24, 5, 0 - }, - - { - DBE_VT_1600_1200_60, - /* flags, width, height, fields_sec, cfreq */ - 0, 1600, 1200, 59940, 162000, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 2160, 1600, 2160, 1644, 1856, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 1250, 1200, 1250, 1201, 1204, - /* pll_m, pll_n, pll_p */ - 6, 1, 0 - }, - - { - DBE_VT_1600_1200_75, - /* flags, width, height, fields_sec, cfreq */ - 0, 1600, 1200, 75000, 202500, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 2160, 1600, 2160, 1644, 1856, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 1250, 1200, 1250, 1201, 1204, - /* pll_m, pll_n, pll_p */ - 15, 2, 0 - }, - - { - DBE_VT_1920_1080_50, - /* flags, width, height, fields_sec, cfreq */ - 0, 1920, 1080, 50000, 133200, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 2368, 1920, 2368, 1952, 2096, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 1125, 1080, 1125, 1083, 1086, - /* pll_m, pll_n, pll_p */ - 5, 1, 0 - }, - - { - DBE_VT_1920_1080_60, - /* flags, width, height, fields_sec, cfreq */ - 0, 1920, 1080, 59940, 159840, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 2368, 1920, 2368, 1952, 2096, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 1125, 1080, 1125, 1083, 1086, - /* pll_m, pll_n, pll_p */ - 6, 1, 0 - }, - - { - DBE_VT_1920_1080_72, - /* flags, width, height, fields_sec, cfreq */ - 0, 1920, 1080, 72000, 216023, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 2560, 1920, 2560, 1968, 2184, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 1172, 1080, 1172, 1083, 1086, - /* pll_m, pll_n, pll_p */ - 8, 1, 0 - }, - - { - DBE_VT_1920_1200_50, - /* flags, width, height, fields_sec, cfreq */ - 0, 1920, 1200, 50000, 161500, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 2584, 1920, 2584, 1984, 2240, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 1250, 1200, 1250, 1203, 1206, - /* pll_m, pll_n, pll_p */ - 6, 1, 0 - }, - - { - DBE_VT_1920_1200_60, - /* flags, width, height, fields_sec, cfreq */ - 0, 1920, 1200, 59940, 193800, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 2584, 1920, 2584, 1984, 2240, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 1250, 1200, 1250, 1203, 1206, - /* pll_m, pll_n, pll_p */ - 29, 4, 0 - }, - - { - DBE_VT_1920_1200_66, - /* flags, width, height, fields_sec, cfreq */ - 0, 1920, 1200, 66000, 213180, - /* htotal, hblank_start, hblank_end, hsync_start, hsync_end */ - 2584, 1920, 2584, 1984, 2240, - /* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */ - 1250, 1200, 1250, 1203, 1206, - /* pll_m, pll_n, pll_p */ - 8, 1, 0 - } -}; - -#define DBE_VT_SIZE (sizeof(dbeVTimings)/sizeof(dbeVTimings[0])) -#endif // INCLUDE_TIMING_TABLE_DATA - -#endif // ! __SGIVWFB_H__ diff --git a/include/video/sh_mipi_dsi.h b/include/video/sh_mipi_dsi.h new file mode 100644 index 00000000000..a01f197e6ac --- /dev/null +++ b/include/video/sh_mipi_dsi.h @@ -0,0 +1,59 @@ +/* + * Public SH-mobile MIPI DSI header + * + * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef VIDEO_SH_MIPI_DSI_H +#define VIDEO_SH_MIPI_DSI_H + +enum sh_mipi_dsi_data_fmt { + MIPI_RGB888, + MIPI_RGB565, + MIPI_RGB666_LP, + MIPI_RGB666, + MIPI_BGR888, + MIPI_BGR565, + MIPI_BGR666_LP, + MIPI_BGR666, + MIPI_YUYV, + MIPI_UYVY, + MIPI_YUV420_L, + MIPI_YUV420, +}; + +#define SH_MIPI_DSI_HSABM (1 << 0) +#define SH_MIPI_DSI_HBPBM (1 << 1) +#define SH_MIPI_DSI_HFPBM (1 << 2) +#define SH_MIPI_DSI_BL2E (1 << 3) +#define SH_MIPI_DSI_VSEE (1 << 4) +#define SH_MIPI_DSI_HSEE (1 << 5) +#define SH_MIPI_DSI_HSAE (1 << 6) + +#define SH_MIPI_DSI_HSbyteCLK (1 << 24) +#define SH_MIPI_DSI_HS6divCLK (1 << 25) +#define SH_MIPI_DSI_HS4divCLK (1 << 26) + +#define SH_MIPI_DSI_SYNC_PULSES_MODE (SH_MIPI_DSI_VSEE | \ + SH_MIPI_DSI_HSEE | \ + SH_MIPI_DSI_HSAE) +#define SH_MIPI_DSI_SYNC_EVENTS_MODE (0) +#define SH_MIPI_DSI_SYNC_BURST_MODE (SH_MIPI_DSI_BL2E) + +struct sh_mipi_dsi_info { + enum sh_mipi_dsi_data_fmt data_format; + int channel; + int lane; + unsigned long flags; + u32 clksrc; + u32 phyctrl; /* for extra setting */ + unsigned int vsynw_offset; + int (*set_dot_clock)(struct platform_device *pdev, + void __iomem *base, + int enable); +}; + +#endif diff --git a/include/video/sh_mobile_hdmi.h b/include/video/sh_mobile_hdmi.h new file mode 100644 index 00000000000..63d20efa254 --- /dev/null +++ b/include/video/sh_mobile_hdmi.h @@ -0,0 +1,49 @@ +/* + * SH-Mobile High-Definition Multimedia Interface (HDMI) + * + * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef SH_MOBILE_HDMI_H +#define SH_MOBILE_HDMI_H + +struct sh_mobile_lcdc_chan_cfg; +struct device; +struct clk; + +/* + * flags format + * + * 0x00000CBA + * + * A: Audio source select + * B: Int output option + * C: Chip specific option + */ + +/* Audio source select */ +#define HDMI_SND_SRC_MASK (0xF << 0) +#define HDMI_SND_SRC_I2S (0 << 0) /* default */ +#define HDMI_SND_SRC_SPDIF (1 << 0) +#define HDMI_SND_SRC_DSD (2 << 0) +#define HDMI_SND_SRC_HBR (3 << 0) + +/* Int output option */ +#define HDMI_OUTPUT_PUSH_PULL (1 << 4) /* System control : output mode */ +#define HDMI_OUTPUT_POLARITY_HI (1 << 5) /* System control : output polarity */ + +/* Chip specific option */ +#define HDMI_32BIT_REG (1 << 8) +#define HDMI_HAS_HTOP1 (1 << 9) + +struct sh_mobile_hdmi_info { + unsigned int flags; + long (*clk_optimize_parent)(unsigned long target, unsigned long *best_freq, + unsigned long *parent_freq); +}; + +#endif diff --git a/include/video/sh_mobile_lcdc.h b/include/video/sh_mobile_lcdc.h new file mode 100644 index 00000000000..2605fa8adb9 --- /dev/null +++ b/include/video/sh_mobile_lcdc.h @@ -0,0 +1,198 @@ +#ifndef __ASM_SH_MOBILE_LCDC_H__ +#define __ASM_SH_MOBILE_LCDC_H__ + +#include <linux/fb.h> +#include <video/sh_mobile_meram.h> + +/* Register definitions */ +#define _LDDCKR 0x410 +#define LDDCKR_ICKSEL_BUS (0 << 16) +#define LDDCKR_ICKSEL_MIPI (1 << 16) +#define LDDCKR_ICKSEL_HDMI (2 << 16) +#define LDDCKR_ICKSEL_EXT (3 << 16) +#define LDDCKR_ICKSEL_MASK (7 << 16) +#define LDDCKR_MOSEL (1 << 6) +#define _LDDCKSTPR 0x414 +#define _LDINTR 0x468 +#define LDINTR_FE (1 << 10) +#define LDINTR_VSE (1 << 9) +#define LDINTR_VEE (1 << 8) +#define LDINTR_FS (1 << 2) +#define LDINTR_VSS (1 << 1) +#define LDINTR_VES (1 << 0) +#define LDINTR_STATUS_MASK (0xff << 0) +#define _LDSR 0x46c +#define LDSR_MSS (1 << 10) +#define LDSR_MRS (1 << 8) +#define LDSR_AS (1 << 1) +#define _LDCNT1R 0x470 +#define LDCNT1R_DE (1 << 0) +#define _LDCNT2R 0x474 +#define LDCNT2R_BR (1 << 8) +#define LDCNT2R_MD (1 << 3) +#define LDCNT2R_SE (1 << 2) +#define LDCNT2R_ME (1 << 1) +#define LDCNT2R_DO (1 << 0) +#define _LDRCNTR 0x478 +#define LDRCNTR_SRS (1 << 17) +#define LDRCNTR_SRC (1 << 16) +#define LDRCNTR_MRS (1 << 1) +#define LDRCNTR_MRC (1 << 0) +#define _LDDDSR 0x47c +#define LDDDSR_LS (1 << 2) +#define LDDDSR_WS (1 << 1) +#define LDDDSR_BS (1 << 0) + +#define LDMT1R_VPOL (1 << 28) +#define LDMT1R_HPOL (1 << 27) +#define LDMT1R_DWPOL (1 << 26) +#define LDMT1R_DIPOL (1 << 25) +#define LDMT1R_DAPOL (1 << 24) +#define LDMT1R_HSCNT (1 << 17) +#define LDMT1R_DWCNT (1 << 16) +#define LDMT1R_IFM (1 << 12) +#define LDMT1R_MIFTYP_RGB8 (0x0 << 0) +#define LDMT1R_MIFTYP_RGB9 (0x4 << 0) +#define LDMT1R_MIFTYP_RGB12A (0x5 << 0) +#define LDMT1R_MIFTYP_RGB12B (0x6 << 0) +#define LDMT1R_MIFTYP_RGB16 (0x7 << 0) +#define LDMT1R_MIFTYP_RGB18 (0xa << 0) +#define LDMT1R_MIFTYP_RGB24 (0xb << 0) +#define LDMT1R_MIFTYP_YCBCR (0xf << 0) +#define LDMT1R_MIFTYP_SYS8A (0x0 << 0) +#define LDMT1R_MIFTYP_SYS8B (0x1 << 0) +#define LDMT1R_MIFTYP_SYS8C (0x2 << 0) +#define LDMT1R_MIFTYP_SYS8D (0x3 << 0) +#define LDMT1R_MIFTYP_SYS9 (0x4 << 0) +#define LDMT1R_MIFTYP_SYS12 (0x5 << 0) +#define LDMT1R_MIFTYP_SYS16A (0x7 << 0) +#define LDMT1R_MIFTYP_SYS16B (0x8 << 0) +#define LDMT1R_MIFTYP_SYS16C (0x9 << 0) +#define LDMT1R_MIFTYP_SYS18 (0xa << 0) +#define LDMT1R_MIFTYP_SYS24 (0xb << 0) +#define LDMT1R_MIFTYP_MASK (0xf << 0) + +#define LDDFR_CF1 (1 << 18) +#define LDDFR_CF0 (1 << 17) +#define LDDFR_CC (1 << 16) +#define LDDFR_YF_420 (0 << 8) +#define LDDFR_YF_422 (1 << 8) +#define LDDFR_YF_444 (2 << 8) +#define LDDFR_YF_MASK (3 << 8) +#define LDDFR_PKF_ARGB32 (0x00 << 0) +#define LDDFR_PKF_RGB16 (0x03 << 0) +#define LDDFR_PKF_RGB24 (0x0b << 0) +#define LDDFR_PKF_MASK (0x1f << 0) + +#define LDSM1R_OS (1 << 0) + +#define LDSM2R_OSTRG (1 << 0) + +#define LDPMR_LPS (3 << 0) + +#define _LDDWD0R 0x800 +#define LDDWDxR_WDACT (1 << 28) +#define LDDWDxR_RSW (1 << 24) +#define _LDDRDR 0x840 +#define LDDRDR_RSR (1 << 24) +#define LDDRDR_DRD_MASK (0x3ffff << 0) +#define _LDDWAR 0x900 +#define LDDWAR_WA (1 << 0) +#define _LDDRAR 0x904 +#define LDDRAR_RA (1 << 0) + +enum { + RGB8 = LDMT1R_MIFTYP_RGB8, /* 24bpp, 8:8:8 */ + RGB9 = LDMT1R_MIFTYP_RGB9, /* 18bpp, 9:9 */ + RGB12A = LDMT1R_MIFTYP_RGB12A, /* 24bpp, 12:12 */ + RGB12B = LDMT1R_MIFTYP_RGB12B, /* 12bpp */ + RGB16 = LDMT1R_MIFTYP_RGB16, /* 16bpp */ + RGB18 = LDMT1R_MIFTYP_RGB18, /* 18bpp */ + RGB24 = LDMT1R_MIFTYP_RGB24, /* 24bpp */ + YUV422 = LDMT1R_MIFTYP_YCBCR, /* 16bpp */ + SYS8A = LDMT1R_IFM | LDMT1R_MIFTYP_SYS8A, /* 24bpp, 8:8:8 */ + SYS8B = LDMT1R_IFM | LDMT1R_MIFTYP_SYS8B, /* 18bpp, 8:8:2 */ + SYS8C = LDMT1R_IFM | LDMT1R_MIFTYP_SYS8C, /* 18bpp, 2:8:8 */ + SYS8D = LDMT1R_IFM | LDMT1R_MIFTYP_SYS8D, /* 16bpp, 8:8 */ + SYS9 = LDMT1R_IFM | LDMT1R_MIFTYP_SYS9, /* 18bpp, 9:9 */ + SYS12 = LDMT1R_IFM | LDMT1R_MIFTYP_SYS12, /* 24bpp, 12:12 */ + SYS16A = LDMT1R_IFM | LDMT1R_MIFTYP_SYS16A, /* 16bpp */ + SYS16B = LDMT1R_IFM | LDMT1R_MIFTYP_SYS16B, /* 18bpp, 16:2 */ + SYS16C = LDMT1R_IFM | LDMT1R_MIFTYP_SYS16C, /* 18bpp, 2:16 */ + SYS18 = LDMT1R_IFM | LDMT1R_MIFTYP_SYS18, /* 18bpp */ + SYS24 = LDMT1R_IFM | LDMT1R_MIFTYP_SYS24, /* 24bpp */ +}; + +enum { LCDC_CHAN_DISABLED = 0, + LCDC_CHAN_MAINLCD, + LCDC_CHAN_SUBLCD }; + +enum { LCDC_CLK_BUS, LCDC_CLK_PERIPHERAL, LCDC_CLK_EXTERNAL }; + +#define LCDC_FLAGS_DWPOL (1 << 0) /* Rising edge dot clock data latch */ +#define LCDC_FLAGS_DIPOL (1 << 1) /* Active low display enable polarity */ +#define LCDC_FLAGS_DAPOL (1 << 2) /* Active low display data polarity */ +#define LCDC_FLAGS_HSCNT (1 << 3) /* Disable HSYNC during VBLANK */ +#define LCDC_FLAGS_DWCNT (1 << 4) /* Disable dotclock during blanking */ + +struct sh_mobile_lcdc_sys_bus_cfg { + unsigned long ldmt2r; + unsigned long ldmt3r; + unsigned long deferred_io_msec; +}; + +struct sh_mobile_lcdc_sys_bus_ops { + void (*write_index)(void *handle, unsigned long data); + void (*write_data)(void *handle, unsigned long data); + unsigned long (*read_data)(void *handle); +}; + +struct sh_mobile_lcdc_panel_cfg { + unsigned long width; /* Panel width in mm */ + unsigned long height; /* Panel height in mm */ + int (*setup_sys)(void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops); + void (*start_transfer)(void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops); + void (*display_on)(void); + void (*display_off)(void); +}; + +/* backlight info */ +struct sh_mobile_lcdc_bl_info { + const char *name; + int max_brightness; + int (*set_brightness)(int brightness); +}; + +struct sh_mobile_lcdc_overlay_cfg { + int fourcc; + unsigned int max_xres; + unsigned int max_yres; +}; + +struct sh_mobile_lcdc_chan_cfg { + int chan; + int fourcc; + int colorspace; + int interface_type; /* selects RGBn or SYSn I/F, see above */ + int clock_divider; + unsigned long flags; /* LCDC_FLAGS_... */ + const struct fb_videomode *lcd_modes; + int num_modes; + struct sh_mobile_lcdc_panel_cfg panel_cfg; + struct sh_mobile_lcdc_bl_info bl_info; + struct sh_mobile_lcdc_sys_bus_cfg sys_bus_cfg; /* only for SYSn I/F */ + const struct sh_mobile_meram_cfg *meram_cfg; + + struct platform_device *tx_dev; /* HDMI/DSI transmitter device */ +}; + +struct sh_mobile_lcdc_info { + int clock_source; + struct sh_mobile_lcdc_chan_cfg ch[2]; + struct sh_mobile_lcdc_overlay_cfg overlays[4]; + struct sh_mobile_meram_info *meram_dev; +}; + +#endif /* __ASM_SH_MOBILE_LCDC_H__ */ diff --git a/include/video/sh_mobile_meram.h b/include/video/sh_mobile_meram.h new file mode 100644 index 00000000000..062e6e7f955 --- /dev/null +++ b/include/video/sh_mobile_meram.h @@ -0,0 +1,94 @@ +#ifndef __VIDEO_SH_MOBILE_MERAM_H__ +#define __VIDEO_SH_MOBILE_MERAM_H__ + +/* For sh_mobile_meram_info.addr_mode */ +enum { + SH_MOBILE_MERAM_MODE0 = 0, + SH_MOBILE_MERAM_MODE1 +}; + +enum { + SH_MOBILE_MERAM_PF_NV = 0, + SH_MOBILE_MERAM_PF_RGB, + SH_MOBILE_MERAM_PF_NV24 +}; + + +struct sh_mobile_meram_priv; + +/* + * struct sh_mobile_meram_info - MERAM platform data + * @reserved_icbs: Bitmask of reserved ICBs (for instance used through UIO) + */ +struct sh_mobile_meram_info { + int addr_mode; + u32 reserved_icbs; + struct sh_mobile_meram_priv *priv; + struct platform_device *pdev; +}; + +/* icb config */ +struct sh_mobile_meram_icb_cfg { + unsigned int meram_size; /* MERAM Buffer Size to use */ +}; + +struct sh_mobile_meram_cfg { + struct sh_mobile_meram_icb_cfg icb[2]; +}; + +#if defined(CONFIG_FB_SH_MOBILE_MERAM) || \ + defined(CONFIG_FB_SH_MOBILE_MERAM_MODULE) +unsigned long sh_mobile_meram_alloc(struct sh_mobile_meram_info *meram_dev, + size_t size); +void sh_mobile_meram_free(struct sh_mobile_meram_info *meram_dev, + unsigned long mem, size_t size); +void *sh_mobile_meram_cache_alloc(struct sh_mobile_meram_info *dev, + const struct sh_mobile_meram_cfg *cfg, + unsigned int xres, unsigned int yres, + unsigned int pixelformat, + unsigned int *pitch); +void sh_mobile_meram_cache_free(struct sh_mobile_meram_info *dev, void *data); +void sh_mobile_meram_cache_update(struct sh_mobile_meram_info *dev, void *data, + unsigned long base_addr_y, + unsigned long base_addr_c, + unsigned long *icb_addr_y, + unsigned long *icb_addr_c); +#else +static inline unsigned long +sh_mobile_meram_alloc(struct sh_mobile_meram_info *meram_dev, size_t size) +{ + return 0; +} + +static inline void +sh_mobile_meram_free(struct sh_mobile_meram_info *meram_dev, + unsigned long mem, size_t size) +{ +} + +static inline void * +sh_mobile_meram_cache_alloc(struct sh_mobile_meram_info *dev, + const struct sh_mobile_meram_cfg *cfg, + unsigned int xres, unsigned int yres, + unsigned int pixelformat, + unsigned int *pitch) +{ + return ERR_PTR(-ENODEV); +} + +static inline void +sh_mobile_meram_cache_free(struct sh_mobile_meram_info *dev, void *data) +{ +} + +static inline void +sh_mobile_meram_cache_update(struct sh_mobile_meram_info *dev, void *data, + unsigned long base_addr_y, + unsigned long base_addr_c, + unsigned long *icb_addr_y, + unsigned long *icb_addr_c) +{ +} +#endif + +#endif /* __VIDEO_SH_MOBILE_MERAM_H__ */ diff --git a/include/video/sisfb.h b/include/video/sisfb.h index e402eb5b3c7..6ddff93108f 100644 --- a/include/video/sisfb.h +++ b/include/video/sisfb.h @@ -17,197 +17,12 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA */ - #ifndef _LINUX_SISFB_H_ #define _LINUX_SISFB_H_ -#include <asm/ioctl.h> -#include <asm/types.h> - -/**********************************************/ -/* PUBLIC */ -/**********************************************/ - -/* vbflags, public (others in sis.h) */ -#define CRT2_DEFAULT 0x00000001 -#define CRT2_LCD 0x00000002 -#define CRT2_TV 0x00000004 -#define CRT2_VGA 0x00000008 -#define TV_NTSC 0x00000010 -#define TV_PAL 0x00000020 -#define TV_HIVISION 0x00000040 -#define TV_YPBPR 0x00000080 -#define TV_AVIDEO 0x00000100 -#define TV_SVIDEO 0x00000200 -#define TV_SCART 0x00000400 -#define TV_PALM 0x00001000 -#define TV_PALN 0x00002000 -#define TV_NTSCJ 0x00001000 -#define TV_CHSCART 0x00008000 -#define TV_CHYPBPR525I 0x00010000 -#define CRT1_VGA 0x00000000 -#define CRT1_LCDA 0x00020000 -#define VGA2_CONNECTED 0x00040000 -#define VB_DISPTYPE_CRT1 0x00080000 /* CRT1 connected and used */ -#define VB_SINGLE_MODE 0x20000000 /* CRT1 or CRT2; determined by DISPTYPE_CRTx */ -#define VB_MIRROR_MODE 0x40000000 /* CRT1 + CRT2 identical (mirror mode) */ -#define VB_DUALVIEW_MODE 0x80000000 /* CRT1 + CRT2 independent (dual head mode) */ - -/* Aliases: */ -#define CRT2_ENABLE (CRT2_LCD | CRT2_TV | CRT2_VGA) -#define TV_STANDARD (TV_NTSC | TV_PAL | TV_PALM | TV_PALN | TV_NTSCJ) -#define TV_INTERFACE (TV_AVIDEO|TV_SVIDEO|TV_SCART|TV_HIVISION|TV_YPBPR|TV_CHSCART|TV_CHYPBPR525I) - -/* Only if TV_YPBPR is set: */ -#define TV_YPBPR525I TV_NTSC -#define TV_YPBPR525P TV_PAL -#define TV_YPBPR750P TV_PALM -#define TV_YPBPR1080I TV_PALN -#define TV_YPBPRALL (TV_YPBPR525I | TV_YPBPR525P | TV_YPBPR750P | TV_YPBPR1080I) - -#define VB_DISPTYPE_DISP2 CRT2_ENABLE -#define VB_DISPTYPE_CRT2 CRT2_ENABLE -#define VB_DISPTYPE_DISP1 VB_DISPTYPE_CRT1 -#define VB_DISPMODE_SINGLE VB_SINGLE_MODE -#define VB_DISPMODE_MIRROR VB_MIRROR_MODE -#define VB_DISPMODE_DUAL VB_DUALVIEW_MODE -#define VB_DISPLAY_MODE (SINGLE_MODE | MIRROR_MODE | DUALVIEW_MODE) - -/* Structure argument for SISFB_GET_INFO ioctl */ -struct sisfb_info { - __u32 sisfb_id; /* for identifying sisfb */ -#ifndef SISFB_ID -#define SISFB_ID 0x53495346 /* Identify myself with 'SISF' */ -#endif - __u32 chip_id; /* PCI-ID of detected chip */ - __u32 memory; /* total video memory in KB */ - __u32 heapstart; /* heap start offset in KB */ - __u8 fbvidmode; /* current sisfb mode */ - - __u8 sisfb_version; - __u8 sisfb_revision; - __u8 sisfb_patchlevel; - - __u8 sisfb_caps; /* sisfb capabilities */ - - __u32 sisfb_tqlen; /* turbo queue length (in KB) */ - - __u32 sisfb_pcibus; /* The card's PCI ID */ - __u32 sisfb_pcislot; - __u32 sisfb_pcifunc; - - __u8 sisfb_lcdpdc; /* PanelDelayCompensation */ - - __u8 sisfb_lcda; /* Detected status of LCDA for low res/text modes */ - - __u32 sisfb_vbflags; - __u32 sisfb_currentvbflags; - - __u32 sisfb_scalelcd; - __u32 sisfb_specialtiming; - - __u8 sisfb_haveemi; - __u8 sisfb_emi30,sisfb_emi31,sisfb_emi32,sisfb_emi33; - __u8 sisfb_haveemilcd; - - __u8 sisfb_lcdpdca; /* PanelDelayCompensation for LCD-via-CRT1 */ - - __u16 sisfb_tvxpos, sisfb_tvypos; /* Warning: Values + 32 ! */ - - __u32 sisfb_heapsize; /* heap size (in KB) */ - __u32 sisfb_videooffset; /* Offset of viewport in video memory (in bytes) */ - - __u32 sisfb_curfstn; /* currently running FSTN/DSTN mode */ - __u32 sisfb_curdstn; - - __u16 sisfb_pci_vendor; /* PCI vendor (SiS or XGI) */ - - __u32 sisfb_vbflags2; /* ivideo->vbflags2 */ - - __u8 sisfb_can_post; /* sisfb can POST this card */ - __u8 sisfb_card_posted; /* card is POSTED */ - __u8 sisfb_was_boot_device; /* This card was the boot video device (ie is primary) */ - - __u8 reserved[183]; /* for future use */ -}; - -#define SISFB_CMD_GETVBFLAGS 0x55AA0001 /* no arg; result[1] = vbflags */ -#define SISFB_CMD_SWITCHCRT1 0x55AA0010 /* arg[0]: 99 = query, 0 = off, 1 = on */ -/* more to come */ - -#define SISFB_CMD_ERR_OK 0x80000000 /* command succeeded */ -#define SISFB_CMD_ERR_LOCKED 0x80000001 /* sisfb is locked */ -#define SISFB_CMD_ERR_EARLY 0x80000002 /* request before sisfb took over gfx system */ -#define SISFB_CMD_ERR_NOVB 0x80000003 /* No video bridge */ -#define SISFB_CMD_ERR_NOCRT2 0x80000004 /* can't change CRT1 status, CRT2 disabled */ -/* more to come */ -#define SISFB_CMD_ERR_UNKNOWN 0x8000ffff /* Unknown command */ -#define SISFB_CMD_ERR_OTHER 0x80010000 /* Other error */ - -/* Argument for SISFB_CMD ioctl */ -struct sisfb_cmd { - __u32 sisfb_cmd; - __u32 sisfb_arg[16]; - __u32 sisfb_result[4]; -}; - -/* Addtional IOCTLs for communication sisfb <> X driver */ -/* If changing this, vgatypes.h must also be changed (for X driver) */ - -/* ioctl for identifying and giving some info (esp. memory heap start) */ -#define SISFB_GET_INFO_SIZE _IOR(0xF3,0x00,__u32) -#define SISFB_GET_INFO _IOR(0xF3,0x01,struct sisfb_info) - -/* ioctrl to get current vertical retrace status */ -#define SISFB_GET_VBRSTATUS _IOR(0xF3,0x02,__u32) - -/* ioctl to enable/disable panning auto-maximize (like nomax parameter) */ -#define SISFB_GET_AUTOMAXIMIZE _IOR(0xF3,0x03,__u32) -#define SISFB_SET_AUTOMAXIMIZE _IOW(0xF3,0x03,__u32) - -/* ioctls to relocate TV output (x=D[31:16], y=D[15:0], + 32)*/ -#define SISFB_GET_TVPOSOFFSET _IOR(0xF3,0x04,__u32) -#define SISFB_SET_TVPOSOFFSET _IOW(0xF3,0x04,__u32) - -/* ioctl for internal sisfb commands (sisfbctrl) */ -#define SISFB_COMMAND _IOWR(0xF3,0x05,struct sisfb_cmd) - -/* ioctl for locking sisfb (no register access during lock) */ -/* As of now, only used to avoid register access during - * the ioctls listed above. - */ -#define SISFB_SET_LOCK _IOW(0xF3,0x06,__u32) - -/* ioctls 0xF3 up to 0x3F reserved for sisfb */ - -/****************************************************************/ -/* The following are deprecated and should not be used anymore: */ -/****************************************************************/ -/* ioctl for identifying and giving some info (esp. memory heap start) */ -#define SISFB_GET_INFO_OLD _IOR('n',0xF8,__u32) -/* ioctrl to get current vertical retrace status */ -#define SISFB_GET_VBRSTATUS_OLD _IOR('n',0xF9,__u32) -/* ioctl to enable/disable panning auto-maximize (like nomax parameter) */ -#define SISFB_GET_AUTOMAXIMIZE_OLD _IOR('n',0xFA,__u32) -#define SISFB_SET_AUTOMAXIMIZE_OLD _IOW('n',0xFA,__u32) -/****************************************************************/ -/* End of deprecated ioctl numbers */ -/****************************************************************/ - -/* For fb memory manager (FBIO_ALLOC, FBIO_FREE) */ -struct sis_memreq { - __u32 offset; - __u32 size; -}; - -/**********************************************/ -/* PRIVATE */ -/* (for IN-KERNEL usage only) */ -/**********************************************/ - -#ifdef __KERNEL__ #include <linux/pci.h> +#include <uapi/video/sisfb.h> #define UNKNOWN_VGA 0 #define SIS_300_VGA 1 @@ -220,5 +35,3 @@ extern void sis_malloc_new(struct pci_dev *pdev, struct sis_memreq *req); extern void sis_free(u32 base); extern void sis_free_new(struct pci_dev *pdev, u32 base); #endif - -#endif diff --git a/include/video/sstfb.h b/include/video/sstfb.h index b52f0738124..c449eace12c 100644 --- a/include/video/sstfb.h +++ b/include/video/sstfb.h @@ -156,7 +156,7 @@ #define DAC_READ FBIINIT2 /* in remap mode */ #define FBIINIT3 0x021c /* fbi controls */ # define DISABLE_TEXTURE BIT(6) -# define Y_SWAP_ORIGIN_SHIFT 22 /* Y swap substraction value */ +# define Y_SWAP_ORIGIN_SHIFT 22 /* Y swap subtraction value */ #define HSYNC 0x0220 #define VSYNC 0x0224 #define DAC_DATA 0x022c @@ -212,9 +212,9 @@ # define DACREG_CR0_24BPP 0x50 /* mode 5 */ #define DACREG_CR1_I 0x05 #define DACREG_CC_I 0x06 -# define DACREG_CC_CLKA BIT(7) /* clk A controled by regs */ +# define DACREG_CC_CLKA BIT(7) /* clk A controlled by regs */ # define DACREG_CC_CLKA_C (2<<4) /* clk A uses reg C */ -# define DACREG_CC_CLKB BIT(3) /* clk B controled by regs */ +# define DACREG_CC_CLKB BIT(3) /* clk B controlled by regs */ # define DACREG_CC_CLKB_D 3 /* clkB uses reg D */ #define DACREG_AC0_I 0x48 /* clock A reg C */ #define DACREG_AC1_I 0x49 diff --git a/include/video/tdfx.h b/include/video/tdfx.h index 7431d9681e5..befbaf0a92d 100644 --- a/include/video/tdfx.h +++ b/include/video/tdfx.h @@ -1,6 +1,9 @@ #ifndef _TDFX_H #define _TDFX_H +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> + /* membase0 register offsets */ #define STATUS 0x00 #define PCIINIT0 0x04 @@ -123,6 +126,18 @@ #define VIDCFG_PIXFMT_SHIFT 18 #define DACMODE_2X BIT(0) +/* I2C bit locations in the VIDSERPARPORT register */ +#define DDC_ENAB 0x00040000 +#define DDC_SCL_OUT 0x00080000 +#define DDC_SDA_OUT 0x00100000 +#define DDC_SCL_IN 0x00200000 +#define DDC_SDA_IN 0x00400000 +#define I2C_ENAB 0x00800000 +#define I2C_SCL_OUT 0x01000000 +#define I2C_SDA_OUT 0x02000000 +#define I2C_SCL_IN 0x04000000 +#define I2C_SDA_IN 0x08000000 + /* VGA rubbish, need to change this for multihead support */ #define MISC_W 0x3c2 #define MISC_R 0x3cc @@ -168,12 +183,23 @@ struct banshee_reg { unsigned long miscinit0; }; +struct tdfx_par; + +struct tdfxfb_i2c_chan { + struct tdfx_par *par; + struct i2c_adapter adapter; + struct i2c_algo_bit_data algo; +}; + struct tdfx_par { u32 max_pixclock; u32 palette[16]; void __iomem *regbase_virt; unsigned long iobase; int mtrr_handle; +#ifdef CONFIG_FB_3DFX_I2C + struct tdfxfb_i2c_chan chan[2]; +#endif }; #endif /* __KERNEL__ */ diff --git a/include/video/trident.h b/include/video/trident.h index 200be255168..b6ce19d1b61 100644 --- a/include/video/trident.h +++ b/include/video/trident.h @@ -4,9 +4,9 @@ #endif #if TRIDENTFB_DEBUG -#define debug(f,a...) printk("%s:" f, __FUNCTION__ , ## a);mdelay(1000); +#define debug(f, a...) printk("%s:" f, __func__ , ## a); #else -#define debug(f,a...) +#define debug(f, a...) #endif #define output(f, a...) pr_info("tridentfb: " f, ## a) @@ -24,7 +24,9 @@ #define CYBER9397DVD 0x939A #define CYBER9520 0x9520 #define CYBER9525DVD 0x9525 +#define TGUI9440 0x9440 #define TGUI9660 0x9660 +#define PROVIDIA9685 0x9685 #define IMAGE975 0x9750 #define IMAGE985 0x9850 #define BLADE3D 0x9880 @@ -39,36 +41,11 @@ #define CYBERBLADEXPm8 0x9910 #define CYBERBLADEXPm16 0x9930 -/* acceleration families */ -#define IMAGE 0 -#define BLADE 1 -#define XP 2 - -#define is_image(id) -#define is_xp(id) ((id == CYBERBLADEXPAi1) ||\ - (id == CYBERBLADEXPm8) ||\ - (id == CYBERBLADEXPm16)) - -#define is_blade(id) ((id == BLADE3D) ||\ - (id == CYBERBLADEE4) ||\ - (id == CYBERBLADEi7) ||\ - (id == CYBERBLADEi7D) ||\ - (id == CYBERBLADEi1) ||\ - (id == CYBERBLADEi1D) ||\ - (id == CYBERBLADEAi1) ||\ - (id == CYBERBLADEAi1D)) - /* these defines are for 'lcd' variable */ #define LCD_STRETCH 0 #define LCD_CENTER 1 #define LCD_BIOS 2 -/* display types */ -#define DISPLAY_CRT 0 -#define DISPLAY_FP 1 - -#define flatpanel (displaytype == DISPLAY_FP) - /* General Registers */ #define SPR 0x1F /* Software Programming Register (videoram) */ @@ -88,33 +65,7 @@ #define SKey 0x37 #define SPKey 0x57 -/* 0x3x4 */ -#define CRTHTotal 0x00 -#define CRTHDispEnd 0x01 -#define CRTHBlankStart 0x02 -#define CRTHBlankEnd 0x03 -#define CRTHSyncStart 0x04 -#define CRTHSyncEnd 0x05 - -#define CRTVTotal 0x06 -#define CRTVDispEnd 0x12 -#define CRTVBlankStart 0x15 -#define CRTVBlankEnd 0x16 -#define CRTVSyncStart 0x10 -#define CRTVSyncEnd 0x11 - -#define CRTOverflow 0x07 -#define CRTPRowScan 0x08 -#define CRTMaxScanLine 0x09 -#define CRTModeControl 0x17 -#define CRTLineCompare 0x18 - /* 3x4 */ -#define StartAddrHigh 0x0C -#define StartAddrLow 0x0D -#define Offset 0x13 -#define Underline 0x14 -#define CRTCMode 0x17 #define CRTCModuleTest 0x1E #define FIFOControl 0x20 #define LinearAddReg 0x21 @@ -173,3 +124,23 @@ #define BiosMode 0x5c #define BiosReg 0x5d +/* Graphics Engine */ +#define STATUS 0x2120 +#define OLDCMD 0x2124 +#define DRAWFL 0x2128 +#define OLDCLR 0x212C +#define OLDDST 0x2138 +#define OLDSRC 0x213C +#define OLDDIM 0x2140 +#define CMD 0x2144 +#define ROP 0x2148 +#define COLOR 0x2160 +#define BGCOLOR 0x2164 +#define SRC1 0x2100 +#define SRC2 0x2104 +#define DST1 0x2108 +#define DST2 0x210C + +#define ROP_S 0xCC +#define ROP_P 0xF0 +#define ROP_X 0x66 diff --git a/include/video/udlfb.h b/include/video/udlfb.h new file mode 100644 index 00000000000..f9466fa54ba --- /dev/null +++ b/include/video/udlfb.h @@ -0,0 +1,97 @@ +#ifndef UDLFB_H +#define UDLFB_H + +/* + * TODO: Propose standard fb.h ioctl for reporting damage, + * using _IOWR() and one of the existing area structs from fb.h + * Consider these ioctls deprecated, but they're still used by the + * DisplayLink X server as yet - need both to be modified in tandem + * when new ioctl(s) are ready. + */ +#define DLFB_IOCTL_RETURN_EDID 0xAD +#define DLFB_IOCTL_REPORT_DAMAGE 0xAA +struct dloarea { + int x, y; + int w, h; + int x2, y2; +}; + +struct urb_node { + struct list_head entry; + struct dlfb_data *dev; + struct delayed_work release_urb_work; + struct urb *urb; +}; + +struct urb_list { + struct list_head list; + spinlock_t lock; + struct semaphore limit_sem; + int available; + int count; + size_t size; +}; + +struct dlfb_data { + struct usb_device *udev; + struct device *gdev; /* &udev->dev */ + struct fb_info *info; + struct urb_list urbs; + struct kref kref; + char *backing_buffer; + int fb_count; + bool virtualized; /* true when physical usb device not present */ + struct delayed_work init_framebuffer_work; + struct delayed_work free_framebuffer_work; + atomic_t usb_active; /* 0 = update virtual buffer, but no usb traffic */ + atomic_t lost_pixels; /* 1 = a render op failed. Need screen refresh */ + char *edid; /* null until we read edid from hw or get from sysfs */ + size_t edid_size; + int sku_pixel_limit; + int base16; + int base8; + u32 pseudo_palette[256]; + int blank_mode; /*one of FB_BLANK_ */ + /* blit-only rendering path metrics, exposed through sysfs */ + atomic_t bytes_rendered; /* raw pixel-bytes driver asked to render */ + atomic_t bytes_identical; /* saved effort with backbuffer comparison */ + atomic_t bytes_sent; /* to usb, after compression including overhead */ + atomic_t cpu_kcycles_used; /* transpired during pixel processing */ +}; + +#define NR_USB_REQUEST_I2C_SUB_IO 0x02 +#define NR_USB_REQUEST_CHANNEL 0x12 + +/* -BULK_SIZE as per usb-skeleton. Can we get full page and avoid overhead? */ +#define BULK_SIZE 512 +#define MAX_TRANSFER (PAGE_SIZE*16 - BULK_SIZE) +#define WRITES_IN_FLIGHT (4) + +#define MAX_VENDOR_DESCRIPTOR_SIZE 256 + +#define GET_URB_TIMEOUT HZ +#define FREE_URB_TIMEOUT (HZ*2) + +#define BPP 2 +#define MAX_CMD_PIXELS 255 + +#define RLX_HEADER_BYTES 7 +#define MIN_RLX_PIX_BYTES 4 +#define MIN_RLX_CMD_BYTES (RLX_HEADER_BYTES + MIN_RLX_PIX_BYTES) + +#define RLE_HEADER_BYTES 6 +#define MIN_RLE_PIX_BYTES 3 +#define MIN_RLE_CMD_BYTES (RLE_HEADER_BYTES + MIN_RLE_PIX_BYTES) + +#define RAW_HEADER_BYTES 6 +#define MIN_RAW_PIX_BYTES 2 +#define MIN_RAW_CMD_BYTES (RAW_HEADER_BYTES + MIN_RAW_PIX_BYTES) + +#define DL_DEFIO_WRITE_DELAY 5 /* fb_deferred_io.delay in jiffies */ +#define DL_DEFIO_WRITE_DISABLE (HZ*60) /* "disable" with long delay */ + +/* remove these once align.h patch is taken into kernel */ +#define DL_ALIGN_UP(x, a) ALIGN(x, a) +#define DL_ALIGN_DOWN(x, a) ALIGN(x-(a-1), a) + +#endif diff --git a/include/video/uvesafb.h b/include/video/uvesafb.h index 95bcef19395..30f53625415 100644 --- a/include/video/uvesafb.h +++ b/include/video/uvesafb.h @@ -1,61 +1,8 @@ #ifndef _UVESAFB_H #define _UVESAFB_H -struct v86_regs { - __u32 ebx; - __u32 ecx; - __u32 edx; - __u32 esi; - __u32 edi; - __u32 ebp; - __u32 eax; - __u32 eip; - __u32 eflags; - __u32 esp; - __u16 cs; - __u16 ss; - __u16 es; - __u16 ds; - __u16 fs; - __u16 gs; -}; - -/* Task flags */ -#define TF_VBEIB 0x01 -#define TF_BUF_ESDI 0x02 -#define TF_BUF_ESBX 0x04 -#define TF_BUF_RET 0x08 -#define TF_EXIT 0x10 - -struct uvesafb_task { - __u8 flags; - int buf_len; - struct v86_regs regs; -}; - -/* Constants for the capabilities field - * in vbe_ib */ -#define VBE_CAP_CAN_SWITCH_DAC 0x01 -#define VBE_CAP_VGACOMPAT 0x02 - -/* The VBE Info Block */ -struct vbe_ib { - char vbe_signature[4]; - __u16 vbe_version; - __u32 oem_string_ptr; - __u32 capabilities; - __u32 mode_list_ptr; - __u16 total_memory; - __u16 oem_software_rev; - __u32 oem_vendor_name_ptr; - __u32 oem_product_name_ptr; - __u32 oem_product_rev_ptr; - __u8 reserved[222]; - char oem_data[256]; - char misc_data[512]; -} __attribute__ ((packed)); +#include <uapi/video/uvesafb.h> -#ifdef __KERNEL__ /* VBE CRTC Info Block */ struct vbe_crtc_ib { @@ -187,7 +134,7 @@ struct uvesafb_par { int mode_idx; struct vbe_crtc_ib crtc; + int mtrr_handle; }; -#endif /* __KERNEL__ */ #endif /* _UVESAFB_H */ diff --git a/include/video/vga.h b/include/video/vga.h index b49a5120ca2..cac567f22e6 100644 --- a/include/video/vga.h +++ b/include/video/vga.h @@ -5,7 +5,7 @@ * * Copyright history from vga16fb.c: * Copyright 1999 Ben Pfaff and Petr Vandrovec - * Based on VGA info at http://www.goodnet.com/~tinara/FreeVGA/home.htm + * Based on VGA info at http://www.osdever.net/FreeVGA/home.htm * Based on VESA framebuffer (c) 1998 Gerd Knorr * * This file is subject to the terms and conditions of the GNU General @@ -19,29 +19,7 @@ #include <linux/types.h> #include <asm/io.h> -#ifndef CONFIG_AMIGA #include <asm/vga.h> -#else -/* - * FIXME - * Ugh, we don't have PCI space, so map readb() and friends to use Zorro space - * for MMIO accesses. This should make cirrusfb work again on Amiga - */ -#undef inb_p -#undef inw_p -#undef outb_p -#undef outw -#undef readb -#undef writeb -#undef writew -#define inb_p(port) 0 -#define inw_p(port) 0 -#define outb_p(port, val) do { } while (0) -#define outw(port, val) do { } while (0) -#define readb z_readb -#define writeb z_writeb -#define writew z_writew -#endif #include <asm/byteorder.h> diff --git a/include/video/videomode.h b/include/video/videomode.h new file mode 100644 index 00000000000..3f1049d870d --- /dev/null +++ b/include/video/videomode.h @@ -0,0 +1,58 @@ +/* + * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de> + * + * generic videomode description + * + * This file is released under the GPLv2 + */ + +#ifndef __LINUX_VIDEOMODE_H +#define __LINUX_VIDEOMODE_H + +#include <linux/types.h> +#include <video/display_timing.h> + +/* + * Subsystem independent description of a videomode. + * Can be generated from struct display_timing. + */ +struct videomode { + unsigned long pixelclock; /* pixelclock in Hz */ + + u32 hactive; + u32 hfront_porch; + u32 hback_porch; + u32 hsync_len; + + u32 vactive; + u32 vfront_porch; + u32 vback_porch; + u32 vsync_len; + + enum display_flags flags; /* display flags */ +}; + +/** + * videomode_from_timing - convert display timing to videomode + * @dt: display_timing structure + * @vm: return value + * + * DESCRIPTION: + * This function converts a struct display_timing to a struct videomode. + */ +void videomode_from_timing(const struct display_timing *dt, + struct videomode *vm); + +/** + * videomode_from_timings - convert one display timings entry to videomode + * @disp: structure with all possible timing entries + * @vm: return value + * @index: index into the list of display timings in devicetree + * + * DESCRIPTION: + * This function converts one struct display_timing entry to a struct videomode. + */ +int videomode_from_timings(const struct display_timings *disp, + struct videomode *vm, unsigned int index); + +#endif |