diff options
Diffstat (limited to 'include/uapi/linux')
203 files changed, 11288 insertions, 1647 deletions
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild index 4e67194fd2c..24e9033f8b3 100644 --- a/include/uapi/linux/Kbuild +++ b/include/uapi/linux/Kbuild @@ -62,12 +62,14 @@ header-y += auxvec.h header-y += ax25.h header-y += b1lli.h header-y += baycom.h +header-y += bcm933xx_hcs.h header-y += bfs_fs.h header-y += binfmts.h header-y += blkpg.h header-y += blktrace_api.h header-y += bpqether.h header-y += bsg.h +header-y += btrfs.h header-y += can.h header-y += capability.h header-y += capi.h @@ -137,6 +139,7 @@ header-y += hid.h header-y += hiddev.h header-y += hidraw.h header-y += hpet.h +header-y += hyperv.h header-y += hysdn_if.h header-y += i2c-dev.h header-y += i2c.h @@ -225,6 +228,7 @@ header-y += kvm_para.h endif header-y += l2tp.h +header-y += libc-compat.h header-y += limits.h header-y += llc.h header-y += loop.h @@ -238,6 +242,8 @@ header-y += media.h header-y += mei.h header-y += mempolicy.h header-y += meye.h +header-y += mic_common.h +header-y += mic_ioctl.h header-y += mii.h header-y += minix_fs.h header-y += mman.h @@ -260,6 +266,7 @@ header-y += net_dropmon.h header-y += net_tstamp.h header-y += netconf.h header-y += netdevice.h +header-y += netlink_diag.h header-y += netfilter.h header-y += netfilter_arp.h header-y += netfilter_bridge.h @@ -280,10 +287,12 @@ header-y += nfs_mount.h header-y += nfsacl.h header-y += nl80211.h header-y += nubus.h +header-y += nvme.h header-y += nvram.h header-y += omap3isp.h header-y += omapfb.h header-y += oom.h +header-y += openvswitch.h header-y += packet_diag.h header-y += param.h header-y += parport.h @@ -308,6 +317,7 @@ header-y += ppp-ioctl.h header-y += ppp_defs.h header-y += pps.h header-y += prctl.h +header-y += psci.h header-y += ptp_clock.h header-y += ptrace.h header-y += qnx4_fs.h @@ -330,6 +340,7 @@ header-y += rtnetlink.h header-y += scc.h header-y += sched.h header-y += screen_info.h +header-y += sctp.h header-y += sdla.h header-y += seccomp.h header-y += securebits.h @@ -417,3 +428,5 @@ header-y += x25.h header-y += xattr.h header-y += xfrm.h header-y += hw_breakpoint.h +header-y += zorro.h +header-y += zorro_ids.h diff --git a/include/uapi/linux/acct.h b/include/uapi/linux/acct.h index 11b6ca3e087..df2f9a0bba6 100644 --- a/include/uapi/linux/acct.h +++ b/include/uapi/linux/acct.h @@ -107,10 +107,12 @@ struct acct_v3 #define ACORE 0x08 /* ... dumped core */ #define AXSIG 0x10 /* ... was killed by a signal */ -#ifdef __BIG_ENDIAN +#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN) #define ACCT_BYTEORDER 0x80 /* accounting file is big endian */ -#else +#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN) #define ACCT_BYTEORDER 0x00 /* accounting file is little endian */ +#else +#error unspecified endianness #endif #ifndef __KERNEL__ diff --git a/include/uapi/linux/aio_abi.h b/include/uapi/linux/aio_abi.h index 86fa7a71336..bb2554f7fbd 100644 --- a/include/uapi/linux/aio_abi.h +++ b/include/uapi/linux/aio_abi.h @@ -62,9 +62,9 @@ struct io_event { __s64 res2; /* secondary result */ }; -#if defined(__LITTLE_ENDIAN) +#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN) #define PADDED(x,y) x, y -#elif defined(__BIG_ENDIAN) +#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN) #define PADDED(x,y) y, x #else #error edit for your odd byteorder. diff --git a/include/uapi/linux/apm_bios.h b/include/uapi/linux/apm_bios.h index 724f409adae..df79bca1b89 100644 --- a/include/uapi/linux/apm_bios.h +++ b/include/uapi/linux/apm_bios.h @@ -67,6 +67,8 @@ struct apm_bios_info { #define APM_USER_SUSPEND 0x000a #define APM_STANDBY_RESUME 0x000b #define APM_CAPABILITY_CHANGE 0x000c +#define APM_USER_HIBERNATION 0x000d +#define APM_HIBERNATION_RESUME 0x000e /* * Error codes diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h index 9f096f1c090..cf6714752b6 100644 --- a/include/uapi/linux/audit.h +++ b/include/uapi/linux/audit.h @@ -68,6 +68,8 @@ #define AUDIT_MAKE_EQUIV 1015 /* Append to watched tree */ #define AUDIT_TTY_GET 1016 /* Get TTY auditing status */ #define AUDIT_TTY_SET 1017 /* Set TTY auditing status */ +#define AUDIT_SET_FEATURE 1018 /* Turn an audit feature on or off */ +#define AUDIT_GET_FEATURE 1019 /* Get which features are enabled */ #define AUDIT_FIRST_USER_MSG 1100 /* Userspace messages mostly uninteresting to kernel */ #define AUDIT_USER_AVC 1107 /* We filter this differently */ @@ -106,6 +108,8 @@ #define AUDIT_NETFILTER_PKT 1324 /* Packets traversing netfilter chains */ #define AUDIT_NETFILTER_CFG 1325 /* Netfilter chain modifications */ #define AUDIT_SECCOMP 1326 /* Secure Computing event */ +#define AUDIT_PROCTITLE 1327 /* Proctitle emit event */ +#define AUDIT_FEATURE_CHANGE 1328 /* audit log listing feature changes */ #define AUDIT_AVC 1400 /* SE Linux avc denial or grant */ #define AUDIT_SELINUX_ERR 1401 /* Internal SE Linux Errors */ @@ -246,6 +250,7 @@ #define AUDIT_OBJ_TYPE 21 #define AUDIT_OBJ_LEV_LOW 22 #define AUDIT_OBJ_LEV_HIGH 23 +#define AUDIT_LOGINUID_SET 24 /* These are ONLY useful when checking * at syscall exit time (AUDIT_AT_EXIT). */ @@ -315,20 +320,33 @@ enum { #define AUDIT_STATUS_PID 0x0004 #define AUDIT_STATUS_RATE_LIMIT 0x0008 #define AUDIT_STATUS_BACKLOG_LIMIT 0x0010 +#define AUDIT_STATUS_BACKLOG_WAIT_TIME 0x0020 + +#define AUDIT_VERSION_BACKLOG_LIMIT 1 +#define AUDIT_VERSION_BACKLOG_WAIT_TIME 2 +#define AUDIT_VERSION_LATEST AUDIT_VERSION_BACKLOG_WAIT_TIME + /* Failure-to-log actions */ #define AUDIT_FAIL_SILENT 0 #define AUDIT_FAIL_PRINTK 1 #define AUDIT_FAIL_PANIC 2 +/* + * These bits disambiguate different calling conventions that share an + * ELF machine type, bitness, and endianness + */ +#define __AUDIT_ARCH_CONVENTION_MASK 0x30000000 +#define __AUDIT_ARCH_CONVENTION_MIPS64_N32 0x20000000 + /* distinguish syscall tables */ #define __AUDIT_ARCH_64BIT 0x80000000 #define __AUDIT_ARCH_LE 0x40000000 + #define AUDIT_ARCH_ALPHA (EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) #define AUDIT_ARCH_ARM (EM_ARM|__AUDIT_ARCH_LE) #define AUDIT_ARCH_ARMEB (EM_ARM) #define AUDIT_ARCH_CRIS (EM_CRIS|__AUDIT_ARCH_LE) #define AUDIT_ARCH_FRV (EM_FRV) -#define AUDIT_ARCH_H8300 (EM_H8_300) #define AUDIT_ARCH_I386 (EM_386|__AUDIT_ARCH_LE) #define AUDIT_ARCH_IA64 (EM_IA_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) #define AUDIT_ARCH_M32R (EM_M32R) @@ -336,7 +354,11 @@ enum { #define AUDIT_ARCH_MIPS (EM_MIPS) #define AUDIT_ARCH_MIPSEL (EM_MIPS|__AUDIT_ARCH_LE) #define AUDIT_ARCH_MIPS64 (EM_MIPS|__AUDIT_ARCH_64BIT) +#define AUDIT_ARCH_MIPS64N32 (EM_MIPS|__AUDIT_ARCH_64BIT|\ + __AUDIT_ARCH_CONVENTION_MIPS64_N32) #define AUDIT_ARCH_MIPSEL64 (EM_MIPS|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) +#define AUDIT_ARCH_MIPSEL64N32 (EM_MIPS|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE|\ + __AUDIT_ARCH_CONVENTION_MIPS64_N32) #define AUDIT_ARCH_OPENRISC (EM_OPENRISC) #define AUDIT_ARCH_PARISC (EM_PARISC) #define AUDIT_ARCH_PARISC64 (EM_PARISC|__AUDIT_ARCH_64BIT) @@ -357,6 +379,20 @@ enum { #define AUDIT_PERM_READ 4 #define AUDIT_PERM_ATTR 8 +/* MAX_AUDIT_MESSAGE_LENGTH is set in audit:lib/libaudit.h as: + * 8970 // PATH_MAX*2+CONTEXT_SIZE*2+11+256+1 + * max header+body+tailer: 44 + 29 + 32 + 262 + 7 + pad + */ +#define AUDIT_MESSAGE_TEXT_MAX 8560 + +/* Multicast Netlink socket groups (default up to 32) */ +enum audit_nlgrps { + AUDIT_NLGRP_NONE, /* Group 0 not used */ + AUDIT_NLGRP_READLOG, /* "best effort" read only socket */ + __AUDIT_NLGRP_MAX +}; +#define AUDIT_NLGRP_MAX (__AUDIT_NLGRP_MAX - 1) + struct audit_status { __u32 mask; /* Bit mask for valid entries */ __u32 enabled; /* 1 = enabled, 0 = disabled */ @@ -366,12 +402,32 @@ struct audit_status { __u32 backlog_limit; /* waiting messages limit */ __u32 lost; /* messages lost */ __u32 backlog; /* messages waiting in queue */ + __u32 version; /* audit api version number */ + __u32 backlog_wait_time;/* message queue wait timeout */ +}; + +struct audit_features { +#define AUDIT_FEATURE_VERSION 1 + __u32 vers; + __u32 mask; /* which bits we are dealing with */ + __u32 features; /* which feature to enable/disable */ + __u32 lock; /* which features to lock */ }; +#define AUDIT_FEATURE_ONLY_UNSET_LOGINUID 0 +#define AUDIT_FEATURE_LOGINUID_IMMUTABLE 1 +#define AUDIT_LAST_FEATURE AUDIT_FEATURE_LOGINUID_IMMUTABLE + +#define audit_feature_valid(x) ((x) >= 0 && (x) <= AUDIT_LAST_FEATURE) +#define AUDIT_FEATURE_TO_MASK(x) (1 << ((x) & 31)) /* mask for __u32 */ + struct audit_tty_status { - __u32 enabled; /* 1 = enabled, 0 = disabled */ + __u32 enabled; /* 1 = enabled, 0 = disabled */ + __u32 log_passwd; /* 1 = enabled, 0 = disabled */ }; +#define AUDIT_UID_UNSET (unsigned int)-1 + /* audit_rule_data supports filter rules with both integer and string * fields. It corresponds with AUDIT_ADD_RULE, AUDIT_DEL_RULE and * AUDIT_LIST_RULES requests. diff --git a/include/uapi/linux/auto_fs.h b/include/uapi/linux/auto_fs.h index 77cdba9df27..bb991dfe134 100644 --- a/include/uapi/linux/auto_fs.h +++ b/include/uapi/linux/auto_fs.h @@ -28,25 +28,16 @@ #define AUTOFS_MIN_PROTO_VERSION AUTOFS_PROTO_VERSION /* - * Architectures where both 32- and 64-bit binaries can be executed - * on 64-bit kernels need this. This keeps the structure format - * uniform, and makes sure the wait_queue_token isn't too big to be - * passed back down to the kernel. - * - * This assumes that on these architectures: - * mode 32 bit 64 bit - * ------------------------- - * int 32 bit 32 bit - * long 32 bit 64 bit - * - * If so, 32-bit user-space code should be backwards compatible. + * The wait_queue_token (autofs_wqt_t) is part of a structure which is passed + * back to the kernel via ioctl from userspace. On architectures where 32- and + * 64-bit userspace binaries can be executed it's important that the size of + * autofs_wqt_t stays constant between 32- and 64-bit Linux kernels so that we + * do not break the binary ABI interface by changing the structure size. */ - -#if defined(__sparc__) || defined(__mips__) || defined(__x86_64__) \ - || defined(__powerpc__) || defined(__s390__) -typedef unsigned int autofs_wqt_t; -#else +#if defined(__ia64__) || defined(__alpha__) /* pure 64bit architectures */ typedef unsigned long autofs_wqt_t; +#else +typedef unsigned int autofs_wqt_t; #endif /* Packet types */ diff --git a/include/uapi/linux/auxvec.h b/include/uapi/linux/auxvec.h index 61594d598e7..835c065cc7e 100644 --- a/include/uapi/linux/auxvec.h +++ b/include/uapi/linux/auxvec.h @@ -28,6 +28,7 @@ #define AT_BASE_PLATFORM 24 /* string identifying real platform, may * differ from AT_PLATFORM. */ #define AT_RANDOM 25 /* address of 16 random bytes */ +#define AT_HWCAP2 26 /* extension of AT_HWCAP */ #define AT_EXECFN 31 /* filename of program */ diff --git a/include/uapi/linux/bcache.h b/include/uapi/linux/bcache.h new file mode 100644 index 00000000000..22b6ad31c70 --- /dev/null +++ b/include/uapi/linux/bcache.h @@ -0,0 +1,374 @@ +#ifndef _LINUX_BCACHE_H +#define _LINUX_BCACHE_H + +/* + * Bcache on disk data structures + */ + +#include <asm/types.h> + +#define BITMASK(name, type, field, offset, size) \ +static inline __u64 name(const type *k) \ +{ return (k->field >> offset) & ~(~0ULL << size); } \ + \ +static inline void SET_##name(type *k, __u64 v) \ +{ \ + k->field &= ~(~(~0ULL << size) << offset); \ + k->field |= (v & ~(~0ULL << size)) << offset; \ +} + +/* Btree keys - all units are in sectors */ + +struct bkey { + __u64 high; + __u64 low; + __u64 ptr[]; +}; + +#define KEY_FIELD(name, field, offset, size) \ + BITMASK(name, struct bkey, field, offset, size) + +#define PTR_FIELD(name, offset, size) \ +static inline __u64 name(const struct bkey *k, unsigned i) \ +{ return (k->ptr[i] >> offset) & ~(~0ULL << size); } \ + \ +static inline void SET_##name(struct bkey *k, unsigned i, __u64 v) \ +{ \ + k->ptr[i] &= ~(~(~0ULL << size) << offset); \ + k->ptr[i] |= (v & ~(~0ULL << size)) << offset; \ +} + +#define KEY_SIZE_BITS 16 +#define KEY_MAX_U64S 8 + +KEY_FIELD(KEY_PTRS, high, 60, 3) +KEY_FIELD(HEADER_SIZE, high, 58, 2) +KEY_FIELD(KEY_CSUM, high, 56, 2) +KEY_FIELD(KEY_PINNED, high, 55, 1) +KEY_FIELD(KEY_DIRTY, high, 36, 1) + +KEY_FIELD(KEY_SIZE, high, 20, KEY_SIZE_BITS) +KEY_FIELD(KEY_INODE, high, 0, 20) + +/* Next time I change the on disk format, KEY_OFFSET() won't be 64 bits */ + +static inline __u64 KEY_OFFSET(const struct bkey *k) +{ + return k->low; +} + +static inline void SET_KEY_OFFSET(struct bkey *k, __u64 v) +{ + k->low = v; +} + +/* + * The high bit being set is a relic from when we used it to do binary + * searches - it told you where a key started. It's not used anymore, + * and can probably be safely dropped. + */ +#define KEY(inode, offset, size) \ +((struct bkey) { \ + .high = (1ULL << 63) | ((__u64) (size) << 20) | (inode), \ + .low = (offset) \ +}) + +#define ZERO_KEY KEY(0, 0, 0) + +#define MAX_KEY_INODE (~(~0 << 20)) +#define MAX_KEY_OFFSET (~0ULL >> 1) +#define MAX_KEY KEY(MAX_KEY_INODE, MAX_KEY_OFFSET, 0) + +#define KEY_START(k) (KEY_OFFSET(k) - KEY_SIZE(k)) +#define START_KEY(k) KEY(KEY_INODE(k), KEY_START(k), 0) + +#define PTR_DEV_BITS 12 + +PTR_FIELD(PTR_DEV, 51, PTR_DEV_BITS) +PTR_FIELD(PTR_OFFSET, 8, 43) +PTR_FIELD(PTR_GEN, 0, 8) + +#define PTR_CHECK_DEV ((1 << PTR_DEV_BITS) - 1) + +#define PTR(gen, offset, dev) \ + ((((__u64) dev) << 51) | ((__u64) offset) << 8 | gen) + +/* Bkey utility code */ + +static inline unsigned long bkey_u64s(const struct bkey *k) +{ + return (sizeof(struct bkey) / sizeof(__u64)) + KEY_PTRS(k); +} + +static inline unsigned long bkey_bytes(const struct bkey *k) +{ + return bkey_u64s(k) * sizeof(__u64); +} + +#define bkey_copy(_dest, _src) memcpy(_dest, _src, bkey_bytes(_src)) + +static inline void bkey_copy_key(struct bkey *dest, const struct bkey *src) +{ + SET_KEY_INODE(dest, KEY_INODE(src)); + SET_KEY_OFFSET(dest, KEY_OFFSET(src)); +} + +static inline struct bkey *bkey_next(const struct bkey *k) +{ + __u64 *d = (void *) k; + return (struct bkey *) (d + bkey_u64s(k)); +} + +static inline struct bkey *bkey_idx(const struct bkey *k, unsigned nr_keys) +{ + __u64 *d = (void *) k; + return (struct bkey *) (d + nr_keys); +} +/* Enough for a key with 6 pointers */ +#define BKEY_PAD 8 + +#define BKEY_PADDED(key) \ + union { struct bkey key; __u64 key ## _pad[BKEY_PAD]; } + +/* Superblock */ + +/* Version 0: Cache device + * Version 1: Backing device + * Version 2: Seed pointer into btree node checksum + * Version 3: Cache device with new UUID format + * Version 4: Backing device with data offset + */ +#define BCACHE_SB_VERSION_CDEV 0 +#define BCACHE_SB_VERSION_BDEV 1 +#define BCACHE_SB_VERSION_CDEV_WITH_UUID 3 +#define BCACHE_SB_VERSION_BDEV_WITH_OFFSET 4 +#define BCACHE_SB_MAX_VERSION 4 + +#define SB_SECTOR 8 +#define SB_SIZE 4096 +#define SB_LABEL_SIZE 32 +#define SB_JOURNAL_BUCKETS 256U +/* SB_JOURNAL_BUCKETS must be divisible by BITS_PER_LONG */ +#define MAX_CACHES_PER_SET 8 + +#define BDEV_DATA_START_DEFAULT 16 /* sectors */ + +struct cache_sb { + __u64 csum; + __u64 offset; /* sector where this sb was written */ + __u64 version; + + __u8 magic[16]; + + __u8 uuid[16]; + union { + __u8 set_uuid[16]; + __u64 set_magic; + }; + __u8 label[SB_LABEL_SIZE]; + + __u64 flags; + __u64 seq; + __u64 pad[8]; + + union { + struct { + /* Cache devices */ + __u64 nbuckets; /* device size */ + + __u16 block_size; /* sectors */ + __u16 bucket_size; /* sectors */ + + __u16 nr_in_set; + __u16 nr_this_dev; + }; + struct { + /* Backing devices */ + __u64 data_offset; + + /* + * block_size from the cache device section is still used by + * backing devices, so don't add anything here until we fix + * things to not need it for backing devices anymore + */ + }; + }; + + __u32 last_mount; /* time_t */ + + __u16 first_bucket; + union { + __u16 njournal_buckets; + __u16 keys; + }; + __u64 d[SB_JOURNAL_BUCKETS]; /* journal buckets */ +}; + +static inline _Bool SB_IS_BDEV(const struct cache_sb *sb) +{ + return sb->version == BCACHE_SB_VERSION_BDEV + || sb->version == BCACHE_SB_VERSION_BDEV_WITH_OFFSET; +} + +BITMASK(CACHE_SYNC, struct cache_sb, flags, 0, 1); +BITMASK(CACHE_DISCARD, struct cache_sb, flags, 1, 1); +BITMASK(CACHE_REPLACEMENT, struct cache_sb, flags, 2, 3); +#define CACHE_REPLACEMENT_LRU 0U +#define CACHE_REPLACEMENT_FIFO 1U +#define CACHE_REPLACEMENT_RANDOM 2U + +BITMASK(BDEV_CACHE_MODE, struct cache_sb, flags, 0, 4); +#define CACHE_MODE_WRITETHROUGH 0U +#define CACHE_MODE_WRITEBACK 1U +#define CACHE_MODE_WRITEAROUND 2U +#define CACHE_MODE_NONE 3U +BITMASK(BDEV_STATE, struct cache_sb, flags, 61, 2); +#define BDEV_STATE_NONE 0U +#define BDEV_STATE_CLEAN 1U +#define BDEV_STATE_DIRTY 2U +#define BDEV_STATE_STALE 3U + +/* + * Magic numbers + * + * The various other data structures have their own magic numbers, which are + * xored with the first part of the cache set's UUID + */ + +#define JSET_MAGIC 0x245235c1a3625032ULL +#define PSET_MAGIC 0x6750e15f87337f91ULL +#define BSET_MAGIC 0x90135c78b99e07f5ULL + +static inline __u64 jset_magic(struct cache_sb *sb) +{ + return sb->set_magic ^ JSET_MAGIC; +} + +static inline __u64 pset_magic(struct cache_sb *sb) +{ + return sb->set_magic ^ PSET_MAGIC; +} + +static inline __u64 bset_magic(struct cache_sb *sb) +{ + return sb->set_magic ^ BSET_MAGIC; +} + +/* + * Journal + * + * On disk format for a journal entry: + * seq is monotonically increasing; every journal entry has its own unique + * sequence number. + * + * last_seq is the oldest journal entry that still has keys the btree hasn't + * flushed to disk yet. + * + * version is for on disk format changes. + */ + +#define BCACHE_JSET_VERSION_UUIDv1 1 +#define BCACHE_JSET_VERSION_UUID 1 /* Always latest UUID format */ +#define BCACHE_JSET_VERSION 1 + +struct jset { + __u64 csum; + __u64 magic; + __u64 seq; + __u32 version; + __u32 keys; + + __u64 last_seq; + + BKEY_PADDED(uuid_bucket); + BKEY_PADDED(btree_root); + __u16 btree_level; + __u16 pad[3]; + + __u64 prio_bucket[MAX_CACHES_PER_SET]; + + union { + struct bkey start[0]; + __u64 d[0]; + }; +}; + +/* Bucket prios/gens */ + +struct prio_set { + __u64 csum; + __u64 magic; + __u64 seq; + __u32 version; + __u32 pad; + + __u64 next_bucket; + + struct bucket_disk { + __u16 prio; + __u8 gen; + } __attribute((packed)) data[]; +}; + +/* UUIDS - per backing device/flash only volume metadata */ + +struct uuid_entry { + union { + struct { + __u8 uuid[16]; + __u8 label[32]; + __u32 first_reg; + __u32 last_reg; + __u32 invalidated; + + __u32 flags; + /* Size of flash only volumes */ + __u64 sectors; + }; + + __u8 pad[128]; + }; +}; + +BITMASK(UUID_FLASH_ONLY, struct uuid_entry, flags, 0, 1); + +/* Btree nodes */ + +/* Version 1: Seed pointer into btree node checksum + */ +#define BCACHE_BSET_CSUM 1 +#define BCACHE_BSET_VERSION 1 + +/* + * Btree nodes + * + * On disk a btree node is a list/log of these; within each set the keys are + * sorted + */ +struct bset { + __u64 csum; + __u64 magic; + __u64 seq; + __u32 version; + __u32 keys; + + union { + struct bkey start[0]; + __u64 d[0]; + }; +}; + +/* OBSOLETE */ + +/* UUIDS - per backing device/flash only volume metadata */ + +struct uuid_entry_v0 { + __u8 uuid[16]; + __u8 label[32]; + __u32 first_reg; + __u32 last_reg; + __u32 invalidated; + __u32 pad; +}; + +#endif /* _LINUX_BCACHE_H */ diff --git a/include/uapi/linux/bcm933xx_hcs.h b/include/uapi/linux/bcm933xx_hcs.h new file mode 100644 index 00000000000..d2282183154 --- /dev/null +++ b/include/uapi/linux/bcm933xx_hcs.h @@ -0,0 +1,24 @@ +/* + * Broadcom Cable Modem firmware format + */ + +#ifndef __BCM933XX_HCS_H +#define __BCM933XX_HCS_H + +#include <linux/types.h> + +struct bcm_hcs { + __u16 magic; + __u16 control; + __u16 rev_maj; + __u16 rev_min; + __u32 build_date; + __u32 filelen; + __u32 ldaddress; + char filename[64]; + __u16 hcs; + __u16 her_znaet_chto; + __u32 crc; +}; + +#endif /* __BCM933XX_HCS */ diff --git a/include/uapi/linux/btrfs.h b/include/uapi/linux/btrfs.h new file mode 100644 index 00000000000..2f47824e7a3 --- /dev/null +++ b/include/uapi/linux/btrfs.h @@ -0,0 +1,638 @@ +/* + * Copyright (C) 2007 Oracle. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public + * License v2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the + * Free Software Foundation, Inc., 59 Temple Place - Suite 330, + * Boston, MA 021110-1307, USA. + */ + +#ifndef _UAPI_LINUX_BTRFS_H +#define _UAPI_LINUX_BTRFS_H +#include <linux/types.h> +#include <linux/ioctl.h> + +#define BTRFS_IOCTL_MAGIC 0x94 +#define BTRFS_VOL_NAME_MAX 255 + +/* this should be 4k */ +#define BTRFS_PATH_NAME_MAX 4087 +struct btrfs_ioctl_vol_args { + __s64 fd; + char name[BTRFS_PATH_NAME_MAX + 1]; +}; + +#define BTRFS_DEVICE_PATH_NAME_MAX 1024 + +#define BTRFS_SUBVOL_CREATE_ASYNC (1ULL << 0) +#define BTRFS_SUBVOL_RDONLY (1ULL << 1) +#define BTRFS_SUBVOL_QGROUP_INHERIT (1ULL << 2) +#define BTRFS_FSID_SIZE 16 +#define BTRFS_UUID_SIZE 16 +#define BTRFS_UUID_UNPARSED_SIZE 37 + +#define BTRFS_QGROUP_INHERIT_SET_LIMITS (1ULL << 0) + +struct btrfs_qgroup_limit { + __u64 flags; + __u64 max_rfer; + __u64 max_excl; + __u64 rsv_rfer; + __u64 rsv_excl; +}; + +struct btrfs_qgroup_inherit { + __u64 flags; + __u64 num_qgroups; + __u64 num_ref_copies; + __u64 num_excl_copies; + struct btrfs_qgroup_limit lim; + __u64 qgroups[0]; +}; + +struct btrfs_ioctl_qgroup_limit_args { + __u64 qgroupid; + struct btrfs_qgroup_limit lim; +}; + +#define BTRFS_SUBVOL_NAME_MAX 4039 +struct btrfs_ioctl_vol_args_v2 { + __s64 fd; + __u64 transid; + __u64 flags; + union { + struct { + __u64 size; + struct btrfs_qgroup_inherit __user *qgroup_inherit; + }; + __u64 unused[4]; + }; + char name[BTRFS_SUBVOL_NAME_MAX + 1]; +}; + +/* + * structure to report errors and progress to userspace, either as a + * result of a finished scrub, a canceled scrub or a progress inquiry + */ +struct btrfs_scrub_progress { + __u64 data_extents_scrubbed; /* # of data extents scrubbed */ + __u64 tree_extents_scrubbed; /* # of tree extents scrubbed */ + __u64 data_bytes_scrubbed; /* # of data bytes scrubbed */ + __u64 tree_bytes_scrubbed; /* # of tree bytes scrubbed */ + __u64 read_errors; /* # of read errors encountered (EIO) */ + __u64 csum_errors; /* # of failed csum checks */ + __u64 verify_errors; /* # of occurences, where the metadata + * of a tree block did not match the + * expected values, like generation or + * logical */ + __u64 no_csum; /* # of 4k data block for which no csum + * is present, probably the result of + * data written with nodatasum */ + __u64 csum_discards; /* # of csum for which no data was found + * in the extent tree. */ + __u64 super_errors; /* # of bad super blocks encountered */ + __u64 malloc_errors; /* # of internal kmalloc errors. These + * will likely cause an incomplete + * scrub */ + __u64 uncorrectable_errors; /* # of errors where either no intact + * copy was found or the writeback + * failed */ + __u64 corrected_errors; /* # of errors corrected */ + __u64 last_physical; /* last physical address scrubbed. In + * case a scrub was aborted, this can + * be used to restart the scrub */ + __u64 unverified_errors; /* # of occurences where a read for a + * full (64k) bio failed, but the re- + * check succeeded for each 4k piece. + * Intermittent error. */ +}; + +#define BTRFS_SCRUB_READONLY 1 +struct btrfs_ioctl_scrub_args { + __u64 devid; /* in */ + __u64 start; /* in */ + __u64 end; /* in */ + __u64 flags; /* in */ + struct btrfs_scrub_progress progress; /* out */ + /* pad to 1k */ + __u64 unused[(1024-32-sizeof(struct btrfs_scrub_progress))/8]; +}; + +#define BTRFS_IOCTL_DEV_REPLACE_CONT_READING_FROM_SRCDEV_MODE_ALWAYS 0 +#define BTRFS_IOCTL_DEV_REPLACE_CONT_READING_FROM_SRCDEV_MODE_AVOID 1 +struct btrfs_ioctl_dev_replace_start_params { + __u64 srcdevid; /* in, if 0, use srcdev_name instead */ + __u64 cont_reading_from_srcdev_mode; /* in, see #define + * above */ + __u8 srcdev_name[BTRFS_DEVICE_PATH_NAME_MAX + 1]; /* in */ + __u8 tgtdev_name[BTRFS_DEVICE_PATH_NAME_MAX + 1]; /* in */ +}; + +#define BTRFS_IOCTL_DEV_REPLACE_STATE_NEVER_STARTED 0 +#define BTRFS_IOCTL_DEV_REPLACE_STATE_STARTED 1 +#define BTRFS_IOCTL_DEV_REPLACE_STATE_FINISHED 2 +#define BTRFS_IOCTL_DEV_REPLACE_STATE_CANCELED 3 +#define BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED 4 +struct btrfs_ioctl_dev_replace_status_params { + __u64 replace_state; /* out, see #define above */ + __u64 progress_1000; /* out, 0 <= x <= 1000 */ + __u64 time_started; /* out, seconds since 1-Jan-1970 */ + __u64 time_stopped; /* out, seconds since 1-Jan-1970 */ + __u64 num_write_errors; /* out */ + __u64 num_uncorrectable_read_errors; /* out */ +}; + +#define BTRFS_IOCTL_DEV_REPLACE_CMD_START 0 +#define BTRFS_IOCTL_DEV_REPLACE_CMD_STATUS 1 +#define BTRFS_IOCTL_DEV_REPLACE_CMD_CANCEL 2 +#define BTRFS_IOCTL_DEV_REPLACE_RESULT_NO_ERROR 0 +#define BTRFS_IOCTL_DEV_REPLACE_RESULT_NOT_STARTED 1 +#define BTRFS_IOCTL_DEV_REPLACE_RESULT_ALREADY_STARTED 2 +struct btrfs_ioctl_dev_replace_args { + __u64 cmd; /* in */ + __u64 result; /* out */ + + union { + struct btrfs_ioctl_dev_replace_start_params start; + struct btrfs_ioctl_dev_replace_status_params status; + }; /* in/out */ + + __u64 spare[64]; +}; + +struct btrfs_ioctl_dev_info_args { + __u64 devid; /* in/out */ + __u8 uuid[BTRFS_UUID_SIZE]; /* in/out */ + __u64 bytes_used; /* out */ + __u64 total_bytes; /* out */ + __u64 unused[379]; /* pad to 4k */ + __u8 path[BTRFS_DEVICE_PATH_NAME_MAX]; /* out */ +}; + +struct btrfs_ioctl_fs_info_args { + __u64 max_id; /* out */ + __u64 num_devices; /* out */ + __u8 fsid[BTRFS_FSID_SIZE]; /* out */ + __u32 nodesize; /* out */ + __u32 sectorsize; /* out */ + __u32 clone_alignment; /* out */ + __u32 reserved32; + __u64 reserved[122]; /* pad to 1k */ +}; + +struct btrfs_ioctl_feature_flags { + __u64 compat_flags; + __u64 compat_ro_flags; + __u64 incompat_flags; +}; + +/* balance control ioctl modes */ +#define BTRFS_BALANCE_CTL_PAUSE 1 +#define BTRFS_BALANCE_CTL_CANCEL 2 + +/* + * this is packed, because it should be exactly the same as its disk + * byte order counterpart (struct btrfs_disk_balance_args) + */ +struct btrfs_balance_args { + __u64 profiles; + __u64 usage; + __u64 devid; + __u64 pstart; + __u64 pend; + __u64 vstart; + __u64 vend; + + __u64 target; + + __u64 flags; + + __u64 limit; /* limit number of processed chunks */ + __u64 unused[7]; +} __attribute__ ((__packed__)); + +/* report balance progress to userspace */ +struct btrfs_balance_progress { + __u64 expected; /* estimated # of chunks that will be + * relocated to fulfill the request */ + __u64 considered; /* # of chunks we have considered so far */ + __u64 completed; /* # of chunks relocated so far */ +}; + +#define BTRFS_BALANCE_STATE_RUNNING (1ULL << 0) +#define BTRFS_BALANCE_STATE_PAUSE_REQ (1ULL << 1) +#define BTRFS_BALANCE_STATE_CANCEL_REQ (1ULL << 2) + +struct btrfs_ioctl_balance_args { + __u64 flags; /* in/out */ + __u64 state; /* out */ + + struct btrfs_balance_args data; /* in/out */ + struct btrfs_balance_args meta; /* in/out */ + struct btrfs_balance_args sys; /* in/out */ + + struct btrfs_balance_progress stat; /* out */ + + __u64 unused[72]; /* pad to 1k */ +}; + +#define BTRFS_INO_LOOKUP_PATH_MAX 4080 +struct btrfs_ioctl_ino_lookup_args { + __u64 treeid; + __u64 objectid; + char name[BTRFS_INO_LOOKUP_PATH_MAX]; +}; + +struct btrfs_ioctl_search_key { + /* which root are we searching. 0 is the tree of tree roots */ + __u64 tree_id; + + /* keys returned will be >= min and <= max */ + __u64 min_objectid; + __u64 max_objectid; + + /* keys returned will be >= min and <= max */ + __u64 min_offset; + __u64 max_offset; + + /* max and min transids to search for */ + __u64 min_transid; + __u64 max_transid; + + /* keys returned will be >= min and <= max */ + __u32 min_type; + __u32 max_type; + + /* + * how many items did userland ask for, and how many are we + * returning + */ + __u32 nr_items; + + /* align to 64 bits */ + __u32 unused; + + /* some extra for later */ + __u64 unused1; + __u64 unused2; + __u64 unused3; + __u64 unused4; +}; + +struct btrfs_ioctl_search_header { + __u64 transid; + __u64 objectid; + __u64 offset; + __u32 type; + __u32 len; +}; + +#define BTRFS_SEARCH_ARGS_BUFSIZE (4096 - sizeof(struct btrfs_ioctl_search_key)) +/* + * the buf is an array of search headers where + * each header is followed by the actual item + * the type field is expanded to 32 bits for alignment + */ +struct btrfs_ioctl_search_args { + struct btrfs_ioctl_search_key key; + char buf[BTRFS_SEARCH_ARGS_BUFSIZE]; +}; + +struct btrfs_ioctl_search_args_v2 { + struct btrfs_ioctl_search_key key; /* in/out - search parameters */ + __u64 buf_size; /* in - size of buffer + * out - on EOVERFLOW: needed size + * to store item */ + __u64 buf[0]; /* out - found items */ +}; + +struct btrfs_ioctl_clone_range_args { + __s64 src_fd; + __u64 src_offset, src_length; + __u64 dest_offset; +}; + +/* flags for the defrag range ioctl */ +#define BTRFS_DEFRAG_RANGE_COMPRESS 1 +#define BTRFS_DEFRAG_RANGE_START_IO 2 + +#define BTRFS_SAME_DATA_DIFFERS 1 +/* For extent-same ioctl */ +struct btrfs_ioctl_same_extent_info { + __s64 fd; /* in - destination file */ + __u64 logical_offset; /* in - start of extent in destination */ + __u64 bytes_deduped; /* out - total # of bytes we were able + * to dedupe from this file */ + /* status of this dedupe operation: + * 0 if dedup succeeds + * < 0 for error + * == BTRFS_SAME_DATA_DIFFERS if data differs + */ + __s32 status; /* out - see above description */ + __u32 reserved; +}; + +struct btrfs_ioctl_same_args { + __u64 logical_offset; /* in - start of extent in source */ + __u64 length; /* in - length of extent */ + __u16 dest_count; /* in - total elements in info array */ + __u16 reserved1; + __u32 reserved2; + struct btrfs_ioctl_same_extent_info info[0]; +}; + +struct btrfs_ioctl_space_info { + __u64 flags; + __u64 total_bytes; + __u64 used_bytes; +}; + +struct btrfs_ioctl_space_args { + __u64 space_slots; + __u64 total_spaces; + struct btrfs_ioctl_space_info spaces[0]; +}; + +struct btrfs_data_container { + __u32 bytes_left; /* out -- bytes not needed to deliver output */ + __u32 bytes_missing; /* out -- additional bytes needed for result */ + __u32 elem_cnt; /* out */ + __u32 elem_missed; /* out */ + __u64 val[0]; /* out */ +}; + +struct btrfs_ioctl_ino_path_args { + __u64 inum; /* in */ + __u64 size; /* in */ + __u64 reserved[4]; + /* struct btrfs_data_container *fspath; out */ + __u64 fspath; /* out */ +}; + +struct btrfs_ioctl_logical_ino_args { + __u64 logical; /* in */ + __u64 size; /* in */ + __u64 reserved[4]; + /* struct btrfs_data_container *inodes; out */ + __u64 inodes; +}; + +enum btrfs_dev_stat_values { + /* disk I/O failure stats */ + BTRFS_DEV_STAT_WRITE_ERRS, /* EIO or EREMOTEIO from lower layers */ + BTRFS_DEV_STAT_READ_ERRS, /* EIO or EREMOTEIO from lower layers */ + BTRFS_DEV_STAT_FLUSH_ERRS, /* EIO or EREMOTEIO from lower layers */ + + /* stats for indirect indications for I/O failures */ + BTRFS_DEV_STAT_CORRUPTION_ERRS, /* checksum error, bytenr error or + * contents is illegal: this is an + * indication that the block was damaged + * during read or write, or written to + * wrong location or read from wrong + * location */ + BTRFS_DEV_STAT_GENERATION_ERRS, /* an indication that blocks have not + * been written */ + + BTRFS_DEV_STAT_VALUES_MAX +}; + +/* Reset statistics after reading; needs SYS_ADMIN capability */ +#define BTRFS_DEV_STATS_RESET (1ULL << 0) + +struct btrfs_ioctl_get_dev_stats { + __u64 devid; /* in */ + __u64 nr_items; /* in/out */ + __u64 flags; /* in/out */ + + /* out values: */ + __u64 values[BTRFS_DEV_STAT_VALUES_MAX]; + + __u64 unused[128 - 2 - BTRFS_DEV_STAT_VALUES_MAX]; /* pad to 1k */ +}; + +#define BTRFS_QUOTA_CTL_ENABLE 1 +#define BTRFS_QUOTA_CTL_DISABLE 2 +#define BTRFS_QUOTA_CTL_RESCAN__NOTUSED 3 +struct btrfs_ioctl_quota_ctl_args { + __u64 cmd; + __u64 status; +}; + +struct btrfs_ioctl_quota_rescan_args { + __u64 flags; + __u64 progress; + __u64 reserved[6]; +}; + +struct btrfs_ioctl_qgroup_assign_args { + __u64 assign; + __u64 src; + __u64 dst; +}; + +struct btrfs_ioctl_qgroup_create_args { + __u64 create; + __u64 qgroupid; +}; +struct btrfs_ioctl_timespec { + __u64 sec; + __u32 nsec; +}; + +struct btrfs_ioctl_received_subvol_args { + char uuid[BTRFS_UUID_SIZE]; /* in */ + __u64 stransid; /* in */ + __u64 rtransid; /* out */ + struct btrfs_ioctl_timespec stime; /* in */ + struct btrfs_ioctl_timespec rtime; /* out */ + __u64 flags; /* in */ + __u64 reserved[16]; /* in */ +}; + +/* + * Caller doesn't want file data in the send stream, even if the + * search of clone sources doesn't find an extent. UPDATE_EXTENT + * commands will be sent instead of WRITE commands. + */ +#define BTRFS_SEND_FLAG_NO_FILE_DATA 0x1 + +/* + * Do not add the leading stream header. Used when multiple snapshots + * are sent back to back. + */ +#define BTRFS_SEND_FLAG_OMIT_STREAM_HEADER 0x2 + +/* + * Omit the command at the end of the stream that indicated the end + * of the stream. This option is used when multiple snapshots are + * sent back to back. + */ +#define BTRFS_SEND_FLAG_OMIT_END_CMD 0x4 + +#define BTRFS_SEND_FLAG_MASK \ + (BTRFS_SEND_FLAG_NO_FILE_DATA | \ + BTRFS_SEND_FLAG_OMIT_STREAM_HEADER | \ + BTRFS_SEND_FLAG_OMIT_END_CMD) + +struct btrfs_ioctl_send_args { + __s64 send_fd; /* in */ + __u64 clone_sources_count; /* in */ + __u64 __user *clone_sources; /* in */ + __u64 parent_root; /* in */ + __u64 flags; /* in */ + __u64 reserved[4]; /* in */ +}; + +/* Error codes as returned by the kernel */ +enum btrfs_err_code { + notused, + BTRFS_ERROR_DEV_RAID1_MIN_NOT_MET, + BTRFS_ERROR_DEV_RAID10_MIN_NOT_MET, + BTRFS_ERROR_DEV_RAID5_MIN_NOT_MET, + BTRFS_ERROR_DEV_RAID6_MIN_NOT_MET, + BTRFS_ERROR_DEV_TGT_REPLACE, + BTRFS_ERROR_DEV_MISSING_NOT_FOUND, + BTRFS_ERROR_DEV_ONLY_WRITABLE, + BTRFS_ERROR_DEV_EXCL_RUN_IN_PROGRESS +}; +/* An error code to error string mapping for the kernel +* error codes +*/ +static inline char *btrfs_err_str(enum btrfs_err_code err_code) +{ + switch (err_code) { + case BTRFS_ERROR_DEV_RAID1_MIN_NOT_MET: + return "unable to go below two devices on raid1"; + case BTRFS_ERROR_DEV_RAID10_MIN_NOT_MET: + return "unable to go below four devices on raid10"; + case BTRFS_ERROR_DEV_RAID5_MIN_NOT_MET: + return "unable to go below two devices on raid5"; + case BTRFS_ERROR_DEV_RAID6_MIN_NOT_MET: + return "unable to go below three devices on raid6"; + case BTRFS_ERROR_DEV_TGT_REPLACE: + return "unable to remove the dev_replace target dev"; + case BTRFS_ERROR_DEV_MISSING_NOT_FOUND: + return "no missing devices found to remove"; + case BTRFS_ERROR_DEV_ONLY_WRITABLE: + return "unable to remove the only writeable device"; + case BTRFS_ERROR_DEV_EXCL_RUN_IN_PROGRESS: + return "add/delete/balance/replace/resize operation "\ + "in progress"; + default: + return NULL; + } +} + +#define BTRFS_IOC_SNAP_CREATE _IOW(BTRFS_IOCTL_MAGIC, 1, \ + struct btrfs_ioctl_vol_args) +#define BTRFS_IOC_DEFRAG _IOW(BTRFS_IOCTL_MAGIC, 2, \ + struct btrfs_ioctl_vol_args) +#define BTRFS_IOC_RESIZE _IOW(BTRFS_IOCTL_MAGIC, 3, \ + struct btrfs_ioctl_vol_args) +#define BTRFS_IOC_SCAN_DEV _IOW(BTRFS_IOCTL_MAGIC, 4, \ + struct btrfs_ioctl_vol_args) +/* trans start and trans end are dangerous, and only for + * use by applications that know how to avoid the + * resulting deadlocks + */ +#define BTRFS_IOC_TRANS_START _IO(BTRFS_IOCTL_MAGIC, 6) +#define BTRFS_IOC_TRANS_END _IO(BTRFS_IOCTL_MAGIC, 7) +#define BTRFS_IOC_SYNC _IO(BTRFS_IOCTL_MAGIC, 8) + +#define BTRFS_IOC_CLONE _IOW(BTRFS_IOCTL_MAGIC, 9, int) +#define BTRFS_IOC_ADD_DEV _IOW(BTRFS_IOCTL_MAGIC, 10, \ + struct btrfs_ioctl_vol_args) +#define BTRFS_IOC_RM_DEV _IOW(BTRFS_IOCTL_MAGIC, 11, \ + struct btrfs_ioctl_vol_args) +#define BTRFS_IOC_BALANCE _IOW(BTRFS_IOCTL_MAGIC, 12, \ + struct btrfs_ioctl_vol_args) + +#define BTRFS_IOC_CLONE_RANGE _IOW(BTRFS_IOCTL_MAGIC, 13, \ + struct btrfs_ioctl_clone_range_args) + +#define BTRFS_IOC_SUBVOL_CREATE _IOW(BTRFS_IOCTL_MAGIC, 14, \ + struct btrfs_ioctl_vol_args) +#define BTRFS_IOC_SNAP_DESTROY _IOW(BTRFS_IOCTL_MAGIC, 15, \ + struct btrfs_ioctl_vol_args) +#define BTRFS_IOC_DEFRAG_RANGE _IOW(BTRFS_IOCTL_MAGIC, 16, \ + struct btrfs_ioctl_defrag_range_args) +#define BTRFS_IOC_TREE_SEARCH _IOWR(BTRFS_IOCTL_MAGIC, 17, \ + struct btrfs_ioctl_search_args) +#define BTRFS_IOC_TREE_SEARCH_V2 _IOWR(BTRFS_IOCTL_MAGIC, 17, \ + struct btrfs_ioctl_search_args_v2) +#define BTRFS_IOC_INO_LOOKUP _IOWR(BTRFS_IOCTL_MAGIC, 18, \ + struct btrfs_ioctl_ino_lookup_args) +#define BTRFS_IOC_DEFAULT_SUBVOL _IOW(BTRFS_IOCTL_MAGIC, 19, __u64) +#define BTRFS_IOC_SPACE_INFO _IOWR(BTRFS_IOCTL_MAGIC, 20, \ + struct btrfs_ioctl_space_args) +#define BTRFS_IOC_START_SYNC _IOR(BTRFS_IOCTL_MAGIC, 24, __u64) +#define BTRFS_IOC_WAIT_SYNC _IOW(BTRFS_IOCTL_MAGIC, 22, __u64) +#define BTRFS_IOC_SNAP_CREATE_V2 _IOW(BTRFS_IOCTL_MAGIC, 23, \ + struct btrfs_ioctl_vol_args_v2) +#define BTRFS_IOC_SUBVOL_CREATE_V2 _IOW(BTRFS_IOCTL_MAGIC, 24, \ + struct btrfs_ioctl_vol_args_v2) +#define BTRFS_IOC_SUBVOL_GETFLAGS _IOR(BTRFS_IOCTL_MAGIC, 25, __u64) +#define BTRFS_IOC_SUBVOL_SETFLAGS _IOW(BTRFS_IOCTL_MAGIC, 26, __u64) +#define BTRFS_IOC_SCRUB _IOWR(BTRFS_IOCTL_MAGIC, 27, \ + struct btrfs_ioctl_scrub_args) +#define BTRFS_IOC_SCRUB_CANCEL _IO(BTRFS_IOCTL_MAGIC, 28) +#define BTRFS_IOC_SCRUB_PROGRESS _IOWR(BTRFS_IOCTL_MAGIC, 29, \ + struct btrfs_ioctl_scrub_args) +#define BTRFS_IOC_DEV_INFO _IOWR(BTRFS_IOCTL_MAGIC, 30, \ + struct btrfs_ioctl_dev_info_args) +#define BTRFS_IOC_FS_INFO _IOR(BTRFS_IOCTL_MAGIC, 31, \ + struct btrfs_ioctl_fs_info_args) +#define BTRFS_IOC_BALANCE_V2 _IOWR(BTRFS_IOCTL_MAGIC, 32, \ + struct btrfs_ioctl_balance_args) +#define BTRFS_IOC_BALANCE_CTL _IOW(BTRFS_IOCTL_MAGIC, 33, int) +#define BTRFS_IOC_BALANCE_PROGRESS _IOR(BTRFS_IOCTL_MAGIC, 34, \ + struct btrfs_ioctl_balance_args) +#define BTRFS_IOC_INO_PATHS _IOWR(BTRFS_IOCTL_MAGIC, 35, \ + struct btrfs_ioctl_ino_path_args) +#define BTRFS_IOC_LOGICAL_INO _IOWR(BTRFS_IOCTL_MAGIC, 36, \ + struct btrfs_ioctl_ino_path_args) +#define BTRFS_IOC_SET_RECEIVED_SUBVOL _IOWR(BTRFS_IOCTL_MAGIC, 37, \ + struct btrfs_ioctl_received_subvol_args) +#define BTRFS_IOC_SEND _IOW(BTRFS_IOCTL_MAGIC, 38, struct btrfs_ioctl_send_args) +#define BTRFS_IOC_DEVICES_READY _IOR(BTRFS_IOCTL_MAGIC, 39, \ + struct btrfs_ioctl_vol_args) +#define BTRFS_IOC_QUOTA_CTL _IOWR(BTRFS_IOCTL_MAGIC, 40, \ + struct btrfs_ioctl_quota_ctl_args) +#define BTRFS_IOC_QGROUP_ASSIGN _IOW(BTRFS_IOCTL_MAGIC, 41, \ + struct btrfs_ioctl_qgroup_assign_args) +#define BTRFS_IOC_QGROUP_CREATE _IOW(BTRFS_IOCTL_MAGIC, 42, \ + struct btrfs_ioctl_qgroup_create_args) +#define BTRFS_IOC_QGROUP_LIMIT _IOR(BTRFS_IOCTL_MAGIC, 43, \ + struct btrfs_ioctl_qgroup_limit_args) +#define BTRFS_IOC_QUOTA_RESCAN _IOW(BTRFS_IOCTL_MAGIC, 44, \ + struct btrfs_ioctl_quota_rescan_args) +#define BTRFS_IOC_QUOTA_RESCAN_STATUS _IOR(BTRFS_IOCTL_MAGIC, 45, \ + struct btrfs_ioctl_quota_rescan_args) +#define BTRFS_IOC_QUOTA_RESCAN_WAIT _IO(BTRFS_IOCTL_MAGIC, 46) +#define BTRFS_IOC_GET_FSLABEL _IOR(BTRFS_IOCTL_MAGIC, 49, \ + char[BTRFS_LABEL_SIZE]) +#define BTRFS_IOC_SET_FSLABEL _IOW(BTRFS_IOCTL_MAGIC, 50, \ + char[BTRFS_LABEL_SIZE]) +#define BTRFS_IOC_GET_DEV_STATS _IOWR(BTRFS_IOCTL_MAGIC, 52, \ + struct btrfs_ioctl_get_dev_stats) +#define BTRFS_IOC_DEV_REPLACE _IOWR(BTRFS_IOCTL_MAGIC, 53, \ + struct btrfs_ioctl_dev_replace_args) +#define BTRFS_IOC_FILE_EXTENT_SAME _IOWR(BTRFS_IOCTL_MAGIC, 54, \ + struct btrfs_ioctl_same_args) +#define BTRFS_IOC_GET_FEATURES _IOR(BTRFS_IOCTL_MAGIC, 57, \ + struct btrfs_ioctl_feature_flags) +#define BTRFS_IOC_SET_FEATURES _IOW(BTRFS_IOCTL_MAGIC, 57, \ + struct btrfs_ioctl_feature_flags[2]) +#define BTRFS_IOC_GET_SUPPORTED_FEATURES _IOR(BTRFS_IOCTL_MAGIC, 57, \ + struct btrfs_ioctl_feature_flags[3]) + +#endif /* _UAPI_LINUX_BTRFS_H */ diff --git a/include/uapi/linux/caif/caif_socket.h b/include/uapi/linux/caif/caif_socket.h index 3f3bac6af7b..586e9f98184 100644 --- a/include/uapi/linux/caif/caif_socket.h +++ b/include/uapi/linux/caif/caif_socket.h @@ -1,7 +1,7 @@ /* linux/caif_socket.h * CAIF Definitions for CAIF socket and network layer * Copyright (C) ST-Ericsson AB 2010 - * Author: Sjur Brendeland/ sjur.brandeland@stericsson.com + * Author: Sjur Brendeland * License terms: GNU General Public License (GPL) version 2 */ diff --git a/include/uapi/linux/caif/if_caif.h b/include/uapi/linux/caif/if_caif.h index 5e7eed4edf5..7618aabe8c6 100644 --- a/include/uapi/linux/caif/if_caif.h +++ b/include/uapi/linux/caif/if_caif.h @@ -1,6 +1,6 @@ /* * Copyright (C) ST-Ericsson AB 2010 - * Author: Sjur Brendeland/ sjur.brandeland@stericsson.com + * Author: Sjur Brendeland * License terms: GNU General Public License (GPL) version 2 */ diff --git a/include/uapi/linux/can.h b/include/uapi/linux/can.h index e52958d7c2d..41892f72005 100644 --- a/include/uapi/linux/can.h +++ b/include/uapi/linux/can.h @@ -8,10 +8,42 @@ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research * All rights reserved. * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of Volkswagen nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Alternatively, provided that this notice is retained in full, this + * software may be distributed under the terms of the GNU General + * Public License ("GPL") version 2, in which case the provisions of the + * GPL apply INSTEAD OF those given above. + * + * The provided data structures and external interfaces from this code + * are not restricted to be used by modules with a GPL compatible license. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. */ -#ifndef CAN_H -#define CAN_H +#ifndef _UAPI_CAN_H +#define _UAPI_CAN_H #include <linux/types.h> #include <linux/socket.h> @@ -159,4 +191,4 @@ struct can_filter { #define CAN_INV_FILTER 0x20000000U /* to be set in can_filter.can_id */ -#endif /* CAN_H */ +#endif /* !_UAPI_CAN_H */ diff --git a/include/uapi/linux/can/bcm.h b/include/uapi/linux/can/bcm.h index 3ebe387fea4..89ddb9dc9bd 100644 --- a/include/uapi/linux/can/bcm.h +++ b/include/uapi/linux/can/bcm.h @@ -7,10 +7,42 @@ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research * All rights reserved. * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of Volkswagen nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Alternatively, provided that this notice is retained in full, this + * software may be distributed under the terms of the GNU General + * Public License ("GPL") version 2, in which case the provisions of the + * GPL apply INSTEAD OF those given above. + * + * The provided data structures and external interfaces from this code + * are not restricted to be used by modules with a GPL compatible license. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. */ -#ifndef CAN_BCM_H -#define CAN_BCM_H +#ifndef _UAPI_CAN_BCM_H +#define _UAPI_CAN_BCM_H #include <linux/types.h> #include <linux/can.h> @@ -63,4 +95,4 @@ enum { #define TX_RESET_MULTI_IDX 0x0200 #define RX_RTR_FRAME 0x0400 -#endif /* CAN_BCM_H */ +#endif /* !_UAPI_CAN_BCM_H */ diff --git a/include/uapi/linux/can/error.h b/include/uapi/linux/can/error.h index 7b7148bded7..c247446ab25 100644 --- a/include/uapi/linux/can/error.h +++ b/include/uapi/linux/can/error.h @@ -7,10 +7,42 @@ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research * All rights reserved. * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of Volkswagen nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Alternatively, provided that this notice is retained in full, this + * software may be distributed under the terms of the GNU General + * Public License ("GPL") version 2, in which case the provisions of the + * GPL apply INSTEAD OF those given above. + * + * The provided data structures and external interfaces from this code + * are not restricted to be used by modules with a GPL compatible license. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. */ -#ifndef CAN_ERROR_H -#define CAN_ERROR_H +#ifndef _UAPI_CAN_ERROR_H +#define _UAPI_CAN_ERROR_H #define CAN_ERR_DLC 8 /* dlc for error message frames */ @@ -88,4 +120,4 @@ /* controller specific additional information / data[5..7] */ -#endif /* CAN_ERROR_H */ +#endif /* _UAPI_CAN_ERROR_H */ diff --git a/include/uapi/linux/can/gw.h b/include/uapi/linux/can/gw.h index 8e1db18c3cb..3e6184cf2f6 100644 --- a/include/uapi/linux/can/gw.h +++ b/include/uapi/linux/can/gw.h @@ -7,10 +7,42 @@ * Copyright (c) 2011 Volkswagen Group Electronic Research * All rights reserved. * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of Volkswagen nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Alternatively, provided that this notice is retained in full, this + * software may be distributed under the terms of the GNU General + * Public License ("GPL") version 2, in which case the provisions of the + * GPL apply INSTEAD OF those given above. + * + * The provided data structures and external interfaces from this code + * are not restricted to be used by modules with a GPL compatible license. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. */ -#ifndef CAN_GW_H -#define CAN_GW_H +#ifndef _UAPI_CAN_GW_H +#define _UAPI_CAN_GW_H #include <linux/types.h> #include <linux/can.h> @@ -44,6 +76,8 @@ enum { CGW_SRC_IF, /* ifindex of source network interface */ CGW_DST_IF, /* ifindex of destination network interface */ CGW_FILTER, /* specify struct can_filter on source CAN device */ + CGW_DELETED, /* number of deleted CAN frames (see max_hops param) */ + CGW_LIM_HOPS, /* limit the number of hops of this specific rule */ __CGW_MAX }; @@ -51,6 +85,7 @@ enum { #define CGW_FLAGS_CAN_ECHO 0x01 #define CGW_FLAGS_CAN_SRC_TSTAMP 0x02 +#define CGW_FLAGS_CAN_IIF_TX_OK 0x04 #define CGW_MOD_FUNCS 4 /* AND OR XOR SET */ @@ -114,13 +149,19 @@ enum { * Sets a CAN receive filter for the gateway job specified by the * struct can_filter described in include/linux/can.h * - * CGW_MOD_XXX (length 17 bytes): + * CGW_MOD_(AND|OR|XOR|SET) (length 17 bytes): * Specifies a modification that's done to a received CAN frame before it is * send out to the destination interface. * * <struct can_frame> data used as operator * <u8> affected CAN frame elements * + * CGW_LIM_HOPS (length 1 byte): + * Limit the number of hops of this specific rule. Usually the received CAN + * frame can be processed as much as 'max_hops' times (which is given at module + * load time of the can-gw module). This value is used to reduce the number of + * possible hops for this gateway rule to a value smaller then max_hops. + * * CGW_CS_XOR (length 4 bytes): * Set a simple XOR checksum starting with an initial value into * data[result-idx] using data[start-idx] .. data[end-idx] @@ -159,4 +200,4 @@ enum { * Beware of sending unpacked or aligned structs! */ -#endif +#endif /* !_UAPI_CAN_GW_H */ diff --git a/include/uapi/linux/can/netlink.h b/include/uapi/linux/can/netlink.h index 14966ddb7df..813d11f5497 100644 --- a/include/uapi/linux/can/netlink.h +++ b/include/uapi/linux/can/netlink.h @@ -5,10 +5,18 @@ * * Copyright (c) 2009 Wolfgang Grandegger <wg@grandegger.com> * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the version 2 of the GNU General Public License + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. */ -#ifndef CAN_NETLINK_H -#define CAN_NETLINK_H +#ifndef _UAPI_CAN_NETLINK_H +#define _UAPI_CAN_NETLINK_H #include <linux/types.h> @@ -88,6 +96,7 @@ struct can_ctrlmode { #define CAN_CTRLMODE_3_SAMPLES 0x04 /* Triple sampling mode */ #define CAN_CTRLMODE_ONE_SHOT 0x08 /* One-Shot mode */ #define CAN_CTRLMODE_BERR_REPORTING 0x10 /* Bus-error reporting */ +#define CAN_CTRLMODE_FD 0x20 /* CAN FD mode */ /* * CAN device statistics @@ -114,9 +123,11 @@ enum { IFLA_CAN_RESTART_MS, IFLA_CAN_RESTART, IFLA_CAN_BERR_COUNTER, + IFLA_CAN_DATA_BITTIMING, + IFLA_CAN_DATA_BITTIMING_CONST, __IFLA_CAN_MAX }; #define IFLA_CAN_MAX (__IFLA_CAN_MAX - 1) -#endif /* CAN_NETLINK_H */ +#endif /* !_UAPI_CAN_NETLINK_H */ diff --git a/include/uapi/linux/can/raw.h b/include/uapi/linux/can/raw.h index a814062b071..78ec76fd89a 100644 --- a/include/uapi/linux/can/raw.h +++ b/include/uapi/linux/can/raw.h @@ -8,10 +8,42 @@ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research * All rights reserved. * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of Volkswagen nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Alternatively, provided that this notice is retained in full, this + * software may be distributed under the terms of the GNU General + * Public License ("GPL") version 2, in which case the provisions of the + * GPL apply INSTEAD OF those given above. + * + * The provided data structures and external interfaces from this code + * are not restricted to be used by modules with a GPL compatible license. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. */ -#ifndef CAN_RAW_H -#define CAN_RAW_H +#ifndef _UAPI_CAN_RAW_H +#define _UAPI_CAN_RAW_H #include <linux/can.h> @@ -27,4 +59,4 @@ enum { CAN_RAW_FD_FRAMES, /* allow CAN FD frames (default:off) */ }; -#endif +#endif /* !_UAPI_CAN_RAW_H */ diff --git a/include/uapi/linux/capability.h b/include/uapi/linux/capability.h index ba478fa3012..12c37a197d2 100644 --- a/include/uapi/linux/capability.h +++ b/include/uapi/linux/capability.h @@ -308,8 +308,12 @@ struct vfs_cap_data { #define CAP_LEASE 28 +/* Allow writing the audit log via unicast netlink socket */ + #define CAP_AUDIT_WRITE 29 +/* Allow configuration of audit via unicast netlink socket */ + #define CAP_AUDIT_CONTROL 30 #define CAP_SETFCAP 31 @@ -343,7 +347,12 @@ struct vfs_cap_data { #define CAP_BLOCK_SUSPEND 36 -#define CAP_LAST_CAP CAP_BLOCK_SUSPEND +/* Allow reading the audit log via multicast netlink socket */ + +#define CAP_AUDIT_READ 37 + + +#define CAP_LAST_CAP CAP_AUDIT_READ #define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP) diff --git a/include/uapi/linux/capi.h b/include/uapi/linux/capi.h index 65100d6cb89..7b145fd7afb 100644 --- a/include/uapi/linux/capi.h +++ b/include/uapi/linux/capi.h @@ -102,7 +102,7 @@ typedef struct capi_manufacturer_cmd { /* * member contr is input for - * CAPI_GET_MANUFACTURER, CAPI_VERSION, CAPI_GET_SERIAL + * CAPI_GET_MANUFACTURER, CAPI_GET_VERSION, CAPI_GET_SERIAL * and CAPI_GET_PROFILE */ typedef union capi_ioctl_struct { diff --git a/include/uapi/linux/cdrom.h b/include/uapi/linux/cdrom.h index 898b866b300..bd17ad5aa06 100644 --- a/include/uapi/linux/cdrom.h +++ b/include/uapi/linux/cdrom.h @@ -908,5 +908,39 @@ struct mode_page_header { __be16 desc_length; }; +/* removable medium feature descriptor */ +struct rm_feature_desc { + __be16 feature_code; +#if defined(__BIG_ENDIAN_BITFIELD) + __u8 reserved1:2; + __u8 feature_version:4; + __u8 persistent:1; + __u8 curr:1; +#elif defined(__LITTLE_ENDIAN_BITFIELD) + __u8 curr:1; + __u8 persistent:1; + __u8 feature_version:4; + __u8 reserved1:2; +#endif + __u8 add_len; +#if defined(__BIG_ENDIAN_BITFIELD) + __u8 mech_type:3; + __u8 load:1; + __u8 eject:1; + __u8 pvnt_jmpr:1; + __u8 dbml:1; + __u8 lock:1; +#elif defined(__LITTLE_ENDIAN_BITFIELD) + __u8 lock:1; + __u8 dbml:1; + __u8 pvnt_jmpr:1; + __u8 eject:1; + __u8 load:1; + __u8 mech_type:3; +#endif + __u8 reserved2; + __u8 reserved3; + __u8 reserved4; +}; #endif /* _UAPI_LINUX_CDROM_H */ diff --git a/include/uapi/linux/cifs/cifs_mount.h b/include/uapi/linux/cifs/cifs_mount.h new file mode 100644 index 00000000000..d7e4c6ce617 --- /dev/null +++ b/include/uapi/linux/cifs/cifs_mount.h @@ -0,0 +1,27 @@ +/* + * include/uapi/linux/cifs/cifs_mount.h + * + * Author(s): Scott Lovenberg (scott.lovenberg@gmail.com) + * + * This library is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as published + * by the Free Software Foundation; either version 2.1 of the License, or + * (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU Lesser General Public License for more details. + */ +#ifndef _CIFS_MOUNT_H +#define _CIFS_MOUNT_H + +/* Max string lengths for cifs mounting options. */ +#define CIFS_MAX_DOMAINNAME_LEN 256 /* max fully qualified domain name */ +#define CIFS_MAX_USERNAME_LEN 256 /* reasonable max for current servers */ +#define CIFS_MAX_PASSWORD_LEN 512 /* Windows max seems to be 256 wide chars */ +#define CIFS_MAX_SHARE_LEN 256 /* reasonable max share name length */ +#define CIFS_NI_MAXHOST 1024 /* max host name length (256 * 4 bytes) */ + + +#endif /* _CIFS_MOUNT_H */ diff --git a/include/uapi/linux/cm4000_cs.h b/include/uapi/linux/cm4000_cs.h index bc51f77db91..1217f751a1b 100644 --- a/include/uapi/linux/cm4000_cs.h +++ b/include/uapi/linux/cm4000_cs.h @@ -2,6 +2,7 @@ #define _UAPI_CM4000_H_ #include <linux/types.h> +#include <linux/ioctl.h> #define MAX_ATR 33 diff --git a/include/uapi/linux/cn_proc.h b/include/uapi/linux/cn_proc.h index 0d7b49973bb..f6c271035bb 100644 --- a/include/uapi/linux/cn_proc.h +++ b/include/uapi/linux/cn_proc.h @@ -56,7 +56,9 @@ struct proc_event { PROC_EVENT_PTRACE = 0x00000100, PROC_EVENT_COMM = 0x00000200, /* "next" should be 0x00000400 */ - /* "last" is the last process event: exit */ + /* "last" is the last process event: exit, + * while "next to last" is coredumping event */ + PROC_EVENT_COREDUMP = 0x40000000, PROC_EVENT_EXIT = 0x80000000 } what; __u32 cpu; @@ -110,11 +112,17 @@ struct proc_event { char comm[16]; } comm; + struct coredump_proc_event { + __kernel_pid_t process_pid; + __kernel_pid_t process_tgid; + } coredump; + struct exit_proc_event { __kernel_pid_t process_pid; __kernel_pid_t process_tgid; __u32 exit_code, exit_signal; } exit; + } event_data; }; diff --git a/include/uapi/linux/connector.h b/include/uapi/linux/connector.h index 8761a0349c7..4cb283505e4 100644 --- a/include/uapi/linux/connector.h +++ b/include/uapi/linux/connector.h @@ -44,8 +44,11 @@ #define CN_VAL_DRBD 0x1 #define CN_KVP_IDX 0x9 /* HyperV KVP */ #define CN_KVP_VAL 0x1 /* queries from the kernel */ +#define CN_VSS_IDX 0xA /* HyperV VSS */ +#define CN_VSS_VAL 0x1 /* queries from the kernel */ -#define CN_NETLINK_USERS 10 /* Highest index + 1 */ + +#define CN_NETLINK_USERS 11 /* Highest index + 1 */ /* * Maximum connector's message size. diff --git a/include/uapi/linux/const.h b/include/uapi/linux/const.h index c22c707c455..c872bfd25e1 100644 --- a/include/uapi/linux/const.h +++ b/include/uapi/linux/const.h @@ -21,4 +21,7 @@ #define _AT(T,X) ((T)(X)) #endif +#define _BITUL(x) (_AC(1,UL) << (x)) +#define _BITULL(x) (_AC(1,ULL) << (x)) + #endif /* !(_LINUX_CONST_H) */ diff --git a/include/uapi/linux/dm-ioctl.h b/include/uapi/linux/dm-ioctl.h index 539b179b349..c8a4302093a 100644 --- a/include/uapi/linux/dm-ioctl.h +++ b/include/uapi/linux/dm-ioctl.h @@ -267,9 +267,9 @@ enum { #define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl) #define DM_VERSION_MAJOR 4 -#define DM_VERSION_MINOR 23 -#define DM_VERSION_PATCHLEVEL 1 -#define DM_VERSION_EXTRA "-ioctl (2012-12-18)" +#define DM_VERSION_MINOR 27 +#define DM_VERSION_PATCHLEVEL 0 +#define DM_VERSION_EXTRA "-ioctl (2013-10-30)" /* Status bits */ #define DM_READONLY_FLAG (1 << 0) /* In/Out */ @@ -336,4 +336,20 @@ enum { */ #define DM_SECURE_DATA_FLAG (1 << 15) /* In */ +/* + * If set, a message generated output data. + */ +#define DM_DATA_OUT_FLAG (1 << 16) /* Out */ + +/* + * If set with DM_DEV_REMOVE or DM_REMOVE_ALL this indicates that if + * the device cannot be removed immediately because it is still in use + * it should instead be scheduled for removal when it gets closed. + * + * On return from DM_DEV_REMOVE, DM_DEV_STATUS or other ioctls, this + * flag indicates that the device is scheduled to be removed when it + * gets closed. + */ +#define DM_DEFERRED_REMOVE (1 << 17) /* In/Out */ + #endif /* _LINUX_DM_IOCTL_H */ diff --git a/include/uapi/linux/dm-log-userspace.h b/include/uapi/linux/dm-log-userspace.h index 0678c2adc42..0fa0d9ef06a 100644 --- a/include/uapi/linux/dm-log-userspace.h +++ b/include/uapi/linux/dm-log-userspace.h @@ -201,11 +201,18 @@ * int (*flush)(struct dm_dirty_log *log); * * Payload-to-userspace: - * None. + * If the 'integrated_flush' directive is present in the constructor + * table, the payload is as same as DM_ULOG_MARK_REGION: + * uint64_t [] - region(s) to mark + * else + * None * Payload-to-kernel: * None. * - * No incoming or outgoing payload. Simply flush log state to disk. + * If the 'integrated_flush' option was used during the creation of the + * log, mark region requests are carried as payload in the flush request. + * Piggybacking the mark requests in this way allows for fewer communications + * between kernel and userspace. * * When the request has been processed, user-space must return the * dm_ulog_request to the kernel - setting the 'error' field and clearing @@ -385,8 +392,15 @@ * version 2: DM_ULOG_CTR allowed to return a string containing a * device name that is to be registered with DM via * 'dm_get_device'. + * version 3: DM_ULOG_FLUSH is capable of carrying payload for marking + * regions. This "integrated flush" reduces the number of + * requests between the kernel and userspace by effectively + * merging 'mark' and 'flush' requests. A constructor table + * argument ('integrated_flush') is required to turn this + * feature on, so it is backwards compatible with older + * userspace versions. */ -#define DM_ULOG_REQUEST_VERSION 2 +#define DM_ULOG_REQUEST_VERSION 3 struct dm_ulog_request { /* diff --git a/include/uapi/linux/dn.h b/include/uapi/linux/dn.h index 9c50445462d..4295c745f34 100644 --- a/include/uapi/linux/dn.h +++ b/include/uapi/linux/dn.h @@ -1,7 +1,9 @@ #ifndef _LINUX_DN_H #define _LINUX_DN_H +#include <linux/ioctl.h> #include <linux/types.h> +#include <linux/if_ether.h> /* @@ -120,7 +122,7 @@ struct linkinfo_dn { * Ethernet address format (for DECnet) */ union etheraddress { - __u8 dne_addr[6]; /* Full ethernet address */ + __u8 dne_addr[ETH_ALEN]; /* Full ethernet address */ struct { __u8 dne_hiord[4]; /* DECnet HIORD prefix */ __u8 dne_nodeaddr[2]; /* DECnet node address */ diff --git a/include/uapi/linux/dqblk_xfs.h b/include/uapi/linux/dqblk_xfs.h index 86552807aed..dcd75cc2619 100644 --- a/include/uapi/linux/dqblk_xfs.h +++ b/include/uapi/linux/dqblk_xfs.h @@ -38,6 +38,7 @@ #define Q_XGETQSTAT XQM_CMD(5) /* get quota subsystem status */ #define Q_XQUOTARM XQM_CMD(6) /* free disk space used by dquots */ #define Q_XQUOTASYNC XQM_CMD(7) /* delalloc flush, updates dquots */ +#define Q_XGETQSTATV XQM_CMD(8) /* newer version of get quota */ /* * fs_disk_quota structure: @@ -163,4 +164,50 @@ typedef struct fs_quota_stat { __u16 qs_iwarnlimit; /* limit for num warnings */ } fs_quota_stat_t; +/* + * fs_quota_statv is used by Q_XGETQSTATV for a given file system. It provides + * a centralized way to get meta information about the quota subsystem. eg. + * space taken up for user, group, and project quotas, number of dquots + * currently incore. + * + * This version has proper versioning support with appropriate padding for + * future expansions, and ability to expand for future without creating any + * backward compatibility issues. + * + * Q_XGETQSTATV uses the passed in value of the requested version via + * fs_quota_statv.qs_version to determine the return data layout of + * fs_quota_statv. The kernel will fill the data fields relevant to that + * version. + * + * If kernel does not support user space caller specified version, EINVAL will + * be returned. User space caller can then reduce the version number and retry + * the same command. + */ +#define FS_QSTATV_VERSION1 1 /* fs_quota_statv.qs_version */ +/* + * Some basic information about 'quota files' for Q_XGETQSTATV command + */ +struct fs_qfilestatv { + __u64 qfs_ino; /* inode number */ + __u64 qfs_nblks; /* number of BBs 512-byte-blks */ + __u32 qfs_nextents; /* number of extents */ + __u32 qfs_pad; /* pad for 8-byte alignment */ +}; + +struct fs_quota_statv { + __s8 qs_version; /* version for future changes */ + __u8 qs_pad1; /* pad for 16bit alignment */ + __u16 qs_flags; /* FS_QUOTA_.* flags */ + __u32 qs_incoredqs; /* number of dquots incore */ + struct fs_qfilestatv qs_uquota; /* user quota information */ + struct fs_qfilestatv qs_gquota; /* group quota information */ + struct fs_qfilestatv qs_pquota; /* project quota information */ + __s32 qs_btimelimit; /* limit for blks timer */ + __s32 qs_itimelimit; /* limit for inodes timer */ + __s32 qs_rtbtimelimit;/* limit for rt blks timer */ + __u16 qs_bwarnlimit; /* limit for num warnings */ + __u16 qs_iwarnlimit; /* limit for num warnings */ + __u64 qs_pad2[8]; /* for future proofing */ +}; + #endif /* _LINUX_DQBLK_XFS_H */ diff --git a/include/uapi/linux/dvb/dmx.h b/include/uapi/linux/dvb/dmx.h index b2a9ad8cafd..b4fb650d9d4 100644 --- a/include/uapi/linux/dvb/dmx.h +++ b/include/uapi/linux/dvb/dmx.h @@ -51,7 +51,7 @@ typedef enum } dmx_input_t; -typedef enum +typedef enum dmx_ts_pes { DMX_PES_AUDIO0, DMX_PES_VIDEO0, diff --git a/include/uapi/linux/dvb/frontend.h b/include/uapi/linux/dvb/frontend.h index c12d452cb40..c56d77c496a 100644 --- a/include/uapi/linux/dvb/frontend.h +++ b/include/uapi/linux/dvb/frontend.h @@ -365,7 +365,17 @@ struct dvb_frontend_event { #define DTV_INTERLEAVING 60 #define DTV_LNA 61 -#define DTV_MAX_COMMAND DTV_LNA +/* Quality parameters */ +#define DTV_STAT_SIGNAL_STRENGTH 62 +#define DTV_STAT_CNR 63 +#define DTV_STAT_PRE_ERROR_BIT_COUNT 64 +#define DTV_STAT_PRE_TOTAL_BIT_COUNT 65 +#define DTV_STAT_POST_ERROR_BIT_COUNT 66 +#define DTV_STAT_POST_TOTAL_BIT_COUNT 67 +#define DTV_STAT_ERROR_BLOCK_COUNT 68 +#define DTV_STAT_TOTAL_BLOCK_COUNT 69 + +#define DTV_MAX_COMMAND DTV_STAT_TOTAL_BLOCK_COUNT typedef enum fe_pilot { PILOT_ON, @@ -452,11 +462,78 @@ struct dtv_cmds_h { __u32 reserved:30; /* Align */ }; +/** + * Scale types for the quality parameters. + * @FE_SCALE_NOT_AVAILABLE: That QoS measure is not available. That + * could indicate a temporary or a permanent + * condition. + * @FE_SCALE_DECIBEL: The scale is measured in 0.0001 dB steps, typically + * used on signal measures. + * @FE_SCALE_RELATIVE: The scale is a relative percentual measure, + * ranging from 0 (0%) to 0xffff (100%). + * @FE_SCALE_COUNTER: The scale counts the occurrence of an event, like + * bit error, block error, lapsed time. + */ +enum fecap_scale_params { + FE_SCALE_NOT_AVAILABLE = 0, + FE_SCALE_DECIBEL, + FE_SCALE_RELATIVE, + FE_SCALE_COUNTER +}; + +/** + * struct dtv_stats - Used for reading a DTV status property + * + * @value: value of the measure. Should range from 0 to 0xffff; + * @scale: Filled with enum fecap_scale_params - the scale + * in usage for that parameter + * + * For most delivery systems, this will return a single value for each + * parameter. + * It should be noticed, however, that new OFDM delivery systems like + * ISDB can use different modulation types for each group of carriers. + * On such standards, up to 8 groups of statistics can be provided, one + * for each carrier group (called "layer" on ISDB). + * In order to be consistent with other delivery systems, the first + * value refers to the entire set of carriers ("global"). + * dtv_status:scale should use the value FE_SCALE_NOT_AVAILABLE when + * the value for the entire group of carriers or from one specific layer + * is not provided by the hardware. + * st.len should be filled with the latest filled status + 1. + * + * In other words, for ISDB, those values should be filled like: + * u.st.stat.svalue[0] = global statistics; + * u.st.stat.scale[0] = FE_SCALE_DECIBELS; + * u.st.stat.value[1] = layer A statistics; + * u.st.stat.scale[1] = FE_SCALE_NOT_AVAILABLE (if not available); + * u.st.stat.svalue[2] = layer B statistics; + * u.st.stat.scale[2] = FE_SCALE_DECIBELS; + * u.st.stat.svalue[3] = layer C statistics; + * u.st.stat.scale[3] = FE_SCALE_DECIBELS; + * u.st.len = 4; + */ +struct dtv_stats { + __u8 scale; /* enum fecap_scale_params type */ + union { + __u64 uvalue; /* for counters and relative scales */ + __s64 svalue; /* for 0.0001 dB measures */ + }; +} __attribute__ ((packed)); + + +#define MAX_DTV_STATS 4 + +struct dtv_fe_stats { + __u8 len; + struct dtv_stats stat[MAX_DTV_STATS]; +} __attribute__ ((packed)); + struct dtv_property { __u32 cmd; __u32 reserved[3]; union { __u32 data; + struct dtv_fe_stats st; struct { __u8 data[32]; __u32 len; diff --git a/include/uapi/linux/dvb/version.h b/include/uapi/linux/dvb/version.h index 827cce7e33e..e53e2ad4444 100644 --- a/include/uapi/linux/dvb/version.h +++ b/include/uapi/linux/dvb/version.h @@ -24,6 +24,6 @@ #define _DVBVERSION_H_ #define DVB_API_VERSION 5 -#define DVB_API_VERSION_MINOR 9 +#define DVB_API_VERSION_MINOR 10 #endif /*_DVBVERSION_H_*/ diff --git a/include/uapi/linux/elf-em.h b/include/uapi/linux/elf-em.h index 8e2b7bac437..01529bd9643 100644 --- a/include/uapi/linux/elf-em.h +++ b/include/uapi/linux/elf-em.h @@ -22,6 +22,7 @@ #define EM_PPC 20 /* PowerPC */ #define EM_PPC64 21 /* PowerPC64 */ #define EM_SPU 23 /* Cell BE SPU */ +#define EM_ARM 40 /* ARM 32 bit */ #define EM_SH 42 /* SuperH */ #define EM_SPARCV9 43 /* SPARC v9 64-bit */ #define EM_IA_64 50 /* HP/Intel IA-64 */ @@ -30,10 +31,10 @@ #define EM_CRIS 76 /* Axis Communications 32-bit embedded processor */ #define EM_V850 87 /* NEC v850 */ #define EM_M32R 88 /* Renesas M32R */ -#define EM_H8_300 46 /* Renesas H8/300,300H,H8S */ #define EM_MN10300 89 /* Panasonic/MEI MN10300, AM33 */ #define EM_BLACKFIN 106 /* ADI Blackfin Processor */ #define EM_TI_C6000 140 /* TI C6X DSPs */ +#define EM_AARCH64 183 /* ARM 64 bit */ #define EM_FRV 0x5441 /* Fujitsu FR-V */ #define EM_AVR32 0x18ad /* Atmel AVR32 */ diff --git a/include/uapi/linux/elf.h b/include/uapi/linux/elf.h index 126a8175e3e..ef6103bf1f9 100644 --- a/include/uapi/linux/elf.h +++ b/include/uapi/linux/elf.h @@ -49,14 +49,14 @@ typedef __s64 Elf64_Sxword; * * Specifications are available in: * - * - Sun microsystems: Linker and Libraries. - * Part No: 817-1984-17, September 2008. - * URL: http://docs.sun.com/app/docs/doc/817-1984 + * - Oracle: Linker and Libraries. + * Part No: 817–1984–19, August 2011. + * http://docs.oracle.com/cd/E18752_01/pdf/817-1984.pdf * * - System V ABI AMD64 Architecture Processor Supplement - * Draft Version 0.99., - * May 11, 2009. - * URL: http://www.x86-64.org/ + * Draft Version 0.99.4, + * January 13, 2010. + * http://www.cs.washington.edu/education/courses/cse351/12wi/supp-docs/abi.pdf */ #define PN_XNUM 0xffff @@ -395,6 +395,9 @@ typedef struct elf64_shdr { #define NT_ARM_TLS 0x401 /* ARM TLS register */ #define NT_ARM_HW_BREAK 0x402 /* ARM hardware breakpoint registers */ #define NT_ARM_HW_WATCH 0x403 /* ARM hardware watchpoint registers */ +#define NT_METAG_CBUF 0x500 /* Metag catch buffer registers */ +#define NT_METAG_RPIPE 0x501 /* Metag read pipeline state */ +#define NT_METAG_TLS 0x502 /* Metag TLS pointer */ /* Note header in a PT_NOTE section */ diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 0c9b44871df..e3c7a719c76 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -16,37 +16,97 @@ #include <linux/types.h> #include <linux/if_ether.h> -/* This should work for both 32 and 64 bit userland. */ +/* All structures exposed to userland should be defined such that they + * have the same layout for 32-bit and 64-bit userland. + */ + +/** + * struct ethtool_cmd - link control and status + * @cmd: Command number = %ETHTOOL_GSET or %ETHTOOL_SSET + * @supported: Bitmask of %SUPPORTED_* flags for the link modes, + * physical connectors and other link features for which the + * interface supports autonegotiation or auto-detection. + * Read-only. + * @advertising: Bitmask of %ADVERTISED_* flags for the link modes, + * physical connectors and other link features that are + * advertised through autonegotiation or enabled for + * auto-detection. + * @speed: Low bits of the speed + * @duplex: Duplex mode; one of %DUPLEX_* + * @port: Physical connector type; one of %PORT_* + * @phy_address: MDIO address of PHY (transceiver); 0 or 255 if not + * applicable. For clause 45 PHYs this is the PRTAD. + * @transceiver: Historically used to distinguish different possible + * PHY types, but not in a consistent way. Deprecated. + * @autoneg: Enable/disable autonegotiation and auto-detection; + * either %AUTONEG_DISABLE or %AUTONEG_ENABLE + * @mdio_support: Bitmask of %ETH_MDIO_SUPPORTS_* flags for the MDIO + * protocols supported by the interface; 0 if unknown. + * Read-only. + * @maxtxpkt: Historically used to report TX IRQ coalescing; now + * obsoleted by &struct ethtool_coalesce. Read-only; deprecated. + * @maxrxpkt: Historically used to report RX IRQ coalescing; now + * obsoleted by &struct ethtool_coalesce. Read-only; deprecated. + * @speed_hi: High bits of the speed + * @eth_tp_mdix: Ethernet twisted-pair MDI(-X) status; one of + * %ETH_TP_MDI_*. If the status is unknown or not applicable, the + * value will be %ETH_TP_MDI_INVALID. Read-only. + * @eth_tp_mdix_ctrl: Ethernet twisted pair MDI(-X) control; one of + * %ETH_TP_MDI_*. If MDI(-X) control is not implemented, reads + * yield %ETH_TP_MDI_INVALID and writes may be ignored or rejected. + * When written successfully, the link should be renegotiated if + * necessary. + * @lp_advertising: Bitmask of %ADVERTISED_* flags for the link modes + * and other link features that the link partner advertised + * through autonegotiation; 0 if unknown or not applicable. + * Read-only. + * + * The link speed in Mbps is split between @speed and @speed_hi. Use + * the ethtool_cmd_speed() and ethtool_cmd_speed_set() functions to + * access it. + * + * If autonegotiation is disabled, the speed and @duplex represent the + * fixed link mode and are writable if the driver supports multiple + * link modes. If it is enabled then they are read-only; if the link + * is up they represent the negotiated link mode; if the link is down, + * the speed is 0, %SPEED_UNKNOWN or the highest enabled speed and + * @duplex is %DUPLEX_UNKNOWN or the best enabled duplex mode. + * + * Some hardware interfaces may have multiple PHYs and/or physical + * connectors fitted or do not allow the driver to detect which are + * fitted. For these interfaces @port and/or @phy_address may be + * writable, possibly dependent on @autoneg being %AUTONEG_DISABLE. + * Otherwise, attempts to write different values may be ignored or + * rejected. + * + * Users should assume that all fields not marked read-only are + * writable and subject to validation by the driver. They should use + * %ETHTOOL_GSET to get the current values before making specific + * changes and then applying them with %ETHTOOL_SSET. + * + * Drivers that implement set_settings() should validate all fields + * other than @cmd that are not described as read-only or deprecated, + * and must ignore all fields described as read-only. + * + * Deprecated fields should be ignored by both users and drivers. + */ struct ethtool_cmd { __u32 cmd; - __u32 supported; /* Features this interface supports */ - __u32 advertising; /* Features this interface advertises */ - __u16 speed; /* The forced speed (lower bits) in - * Mbps. Please use - * ethtool_cmd_speed()/_set() to - * access it */ - __u8 duplex; /* Duplex, half or full */ - __u8 port; /* Which connector port */ - __u8 phy_address; /* MDIO PHY address (PRTAD for clause 45). - * May be read-only or read-write - * depending on the driver. - */ - __u8 transceiver; /* Which transceiver to use */ - __u8 autoneg; /* Enable or disable autonegotiation */ - __u8 mdio_support; /* MDIO protocols supported. Read-only. - * Not set by all drivers. - */ - __u32 maxtxpkt; /* Tx pkts before generating tx int */ - __u32 maxrxpkt; /* Rx pkts before generating rx int */ - __u16 speed_hi; /* The forced speed (upper - * bits) in Mbps. Please use - * ethtool_cmd_speed()/_set() to - * access it */ - __u8 eth_tp_mdix; /* twisted pair MDI-X status */ - __u8 eth_tp_mdix_ctrl; /* twisted pair MDI-X control, when set, - * link should be renegotiated if necessary - */ - __u32 lp_advertising; /* Features the link partner advertises */ + __u32 supported; + __u32 advertising; + __u16 speed; + __u8 duplex; + __u8 port; + __u8 phy_address; + __u8 transceiver; + __u8 autoneg; + __u8 mdio_support; + __u32 maxtxpkt; + __u32 maxrxpkt; + __u16 speed_hi; + __u8 eth_tp_mdix; + __u8 eth_tp_mdix_ctrl; + __u32 lp_advertising; __u32 reserved[2]; }; @@ -79,37 +139,68 @@ static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep) #define ETHTOOL_FWVERS_LEN 32 #define ETHTOOL_BUSINFO_LEN 32 -/* these strings are set to whatever the driver author decides... */ + +/** + * struct ethtool_drvinfo - general driver and device information + * @cmd: Command number = %ETHTOOL_GDRVINFO + * @driver: Driver short name. This should normally match the name + * in its bus driver structure (e.g. pci_driver::name). Must + * not be an empty string. + * @version: Driver version string; may be an empty string + * @fw_version: Firmware version string; may be an empty string + * @bus_info: Device bus address. This should match the dev_name() + * string for the underlying bus device, if there is one. May be + * an empty string. + * @n_priv_flags: Number of flags valid for %ETHTOOL_GPFLAGS and + * %ETHTOOL_SPFLAGS commands; also the number of strings in the + * %ETH_SS_PRIV_FLAGS set + * @n_stats: Number of u64 statistics returned by the %ETHTOOL_GSTATS + * command; also the number of strings in the %ETH_SS_STATS set + * @testinfo_len: Number of results returned by the %ETHTOOL_TEST + * command; also the number of strings in the %ETH_SS_TEST set + * @eedump_len: Size of EEPROM accessible through the %ETHTOOL_GEEPROM + * and %ETHTOOL_SEEPROM commands, in bytes + * @regdump_len: Size of register dump returned by the %ETHTOOL_GREGS + * command, in bytes + * + * Users can use the %ETHTOOL_GSSET_INFO command to get the number of + * strings in any string set (from Linux 2.6.34). + * + * Drivers should set at most @driver, @version, @fw_version and + * @bus_info in their get_drvinfo() implementation. The ethtool + * core fills in the other fields using other driver operations. + */ struct ethtool_drvinfo { __u32 cmd; - char driver[32]; /* driver short name, "tulip", "eepro100" */ - char version[32]; /* driver version string */ - char fw_version[ETHTOOL_FWVERS_LEN]; /* firmware version string */ - char bus_info[ETHTOOL_BUSINFO_LEN]; /* Bus info for this IF. */ - /* For PCI devices, use pci_name(pci_dev). */ + char driver[32]; + char version[32]; + char fw_version[ETHTOOL_FWVERS_LEN]; + char bus_info[ETHTOOL_BUSINFO_LEN]; char reserved1[32]; char reserved2[12]; - /* - * Some struct members below are filled in - * using ops->get_sset_count(). Obtaining - * this info from ethtool_drvinfo is now - * deprecated; Use ETHTOOL_GSSET_INFO - * instead. - */ - __u32 n_priv_flags; /* number of flags valid in ETHTOOL_GPFLAGS */ - __u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */ + __u32 n_priv_flags; + __u32 n_stats; __u32 testinfo_len; - __u32 eedump_len; /* Size of data from ETHTOOL_GEEPROM (bytes) */ - __u32 regdump_len; /* Size of data from ETHTOOL_GREGS (bytes) */ + __u32 eedump_len; + __u32 regdump_len; }; #define SOPASS_MAX 6 -/* wake-on-lan settings */ + +/** + * struct ethtool_wolinfo - Wake-On-Lan configuration + * @cmd: Command number = %ETHTOOL_GWOL or %ETHTOOL_SWOL + * @supported: Bitmask of %WAKE_* flags for supported Wake-On-Lan modes. + * Read-only. + * @wolopts: Bitmask of %WAKE_* flags for enabled Wake-On-Lan modes. + * @sopass: SecureOn(tm) password; meaningful only if %WAKE_MAGICSECURE + * is set in @wolopts. + */ struct ethtool_wolinfo { __u32 cmd; __u32 supported; __u32 wolopts; - __u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */ + __u8 sopass[SOPASS_MAX]; }; /* for passing single values */ @@ -118,20 +209,51 @@ struct ethtool_value { __u32 data; }; -/* for passing big chunks of data */ +/** + * struct ethtool_regs - hardware register dump + * @cmd: Command number = %ETHTOOL_GREGS + * @version: Dump format version. This is driver-specific and may + * distinguish different chips/revisions. Drivers must use new + * version numbers whenever the dump format changes in an + * incompatible way. + * @len: On entry, the real length of @data. On return, the number of + * bytes used. + * @data: Buffer for the register dump + * + * Users should use %ETHTOOL_GDRVINFO to find the maximum length of + * a register dump for the interface. They must allocate the buffer + * immediately following this structure. + */ struct ethtool_regs { __u32 cmd; - __u32 version; /* driver-specific, indicates different chips/revs */ - __u32 len; /* bytes */ + __u32 version; + __u32 len; __u8 data[0]; }; -/* for passing EEPROM chunks */ +/** + * struct ethtool_eeprom - EEPROM dump + * @cmd: Command number = %ETHTOOL_GEEPROM, %ETHTOOL_GMODULEEEPROM or + * %ETHTOOL_SEEPROM + * @magic: A 'magic cookie' value to guard against accidental changes. + * The value passed in to %ETHTOOL_SEEPROM must match the value + * returned by %ETHTOOL_GEEPROM for the same device. This is + * unused when @cmd is %ETHTOOL_GMODULEEEPROM. + * @offset: Offset within the EEPROM to begin reading/writing, in bytes + * @len: On entry, number of bytes to read/write. On successful + * return, number of bytes actually read/written. In case of + * error, this may indicate at what point the error occurred. + * @data: Buffer to read/write from + * + * Users may use %ETHTOOL_GDRVINFO or %ETHTOOL_GMODULEINFO to find + * the length of an on-board or module EEPROM, respectively. They + * must allocate the buffer immediately following this structure. + */ struct ethtool_eeprom { __u32 cmd; __u32 magic; - __u32 offset; /* in bytes */ - __u32 len; /* in bytes */ + __u32 offset; + __u32 len; __u8 data[0]; }; @@ -229,17 +351,18 @@ struct ethtool_modinfo { * @rate_sample_interval: How often to do adaptive coalescing packet rate * sampling, measured in seconds. Must not be zero. * - * Each pair of (usecs, max_frames) fields specifies this exit - * condition for interrupt coalescing: + * Each pair of (usecs, max_frames) fields specifies that interrupts + * should be coalesced until * (usecs > 0 && time_since_first_completion >= usecs) || * (max_frames > 0 && completed_frames >= max_frames) + * * It is illegal to set both usecs and max_frames to zero as this * would cause interrupts to never be generated. To disable * coalescing, set usecs = 0 and max_frames = 1. * * Some implementations ignore the value of max_frames and use the - * condition: - * time_since_first_completion >= usecs + * condition time_since_first_completion >= usecs + * * This is deprecated. Drivers for hardware that does not support * counting completions should validate that max_frames == !rx_usecs. * @@ -279,22 +402,37 @@ struct ethtool_coalesce { __u32 rate_sample_interval; }; -/* for configuring RX/TX ring parameters */ +/** + * struct ethtool_ringparam - RX/TX ring parameters + * @cmd: Command number = %ETHTOOL_GRINGPARAM or %ETHTOOL_SRINGPARAM + * @rx_max_pending: Maximum supported number of pending entries per + * RX ring. Read-only. + * @rx_mini_max_pending: Maximum supported number of pending entries + * per RX mini ring. Read-only. + * @rx_jumbo_max_pending: Maximum supported number of pending entries + * per RX jumbo ring. Read-only. + * @tx_max_pending: Maximum supported number of pending entries per + * TX ring. Read-only. + * @rx_pending: Current maximum number of pending entries per RX ring + * @rx_mini_pending: Current maximum number of pending entries per RX + * mini ring + * @rx_jumbo_pending: Current maximum number of pending entries per RX + * jumbo ring + * @tx_pending: Current maximum supported number of pending entries + * per TX ring + * + * If the interface does not have separate RX mini and/or jumbo rings, + * @rx_mini_max_pending and/or @rx_jumbo_max_pending will be 0. + * + * There may also be driver-dependent minimum values for the number + * of entries per ring. + */ struct ethtool_ringparam { - __u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */ - - /* Read only attributes. These indicate the maximum number - * of pending RX/TX ring entries the driver will allow the - * user to set. - */ + __u32 cmd; __u32 rx_max_pending; __u32 rx_mini_max_pending; __u32 rx_jumbo_max_pending; __u32 tx_max_pending; - - /* Values changeable by the user. The valid values are - * in the range 1 to the "*_max_pending" counterpart above. - */ __u32 rx_pending; __u32 rx_mini_pending; __u32 rx_jumbo_pending; @@ -329,51 +467,96 @@ struct ethtool_channels { __u32 combined_count; }; -/* for configuring link flow control parameters */ +/** + * struct ethtool_pauseparam - Ethernet pause (flow control) parameters + * @cmd: Command number = %ETHTOOL_GPAUSEPARAM or %ETHTOOL_SPAUSEPARAM + * @autoneg: Flag to enable autonegotiation of pause frame use + * @rx_pause: Flag to enable reception of pause frames + * @tx_pause: Flag to enable transmission of pause frames + * + * Drivers should reject a non-zero setting of @autoneg when + * autoneogotiation is disabled (or not supported) for the link. + * + * If the link is autonegotiated, drivers should use + * mii_advertise_flowctrl() or similar code to set the advertised + * pause frame capabilities based on the @rx_pause and @tx_pause flags, + * even if @autoneg is zero. They should also allow the advertised + * pause frame capabilities to be controlled directly through the + * advertising field of &struct ethtool_cmd. + * + * If @autoneg is non-zero, the MAC is configured to send and/or + * receive pause frames according to the result of autonegotiation. + * Otherwise, it is configured directly based on the @rx_pause and + * @tx_pause flags. + */ struct ethtool_pauseparam { - __u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */ - - /* If the link is being auto-negotiated (via ethtool_cmd.autoneg - * being true) the user may set 'autoneg' here non-zero to have the - * pause parameters be auto-negotiated too. In such a case, the - * {rx,tx}_pause values below determine what capabilities are - * advertised. - * - * If 'autoneg' is zero or the link is not being auto-negotiated, - * then {rx,tx}_pause force the driver to use/not-use pause - * flow control. - */ + __u32 cmd; __u32 autoneg; __u32 rx_pause; __u32 tx_pause; }; #define ETH_GSTRING_LEN 32 + +/** + * enum ethtool_stringset - string set ID + * @ETH_SS_TEST: Self-test result names, for use with %ETHTOOL_TEST + * @ETH_SS_STATS: Statistic names, for use with %ETHTOOL_GSTATS + * @ETH_SS_PRIV_FLAGS: Driver private flag names, for use with + * %ETHTOOL_GPFLAGS and %ETHTOOL_SPFLAGS + * @ETH_SS_NTUPLE_FILTERS: Previously used with %ETHTOOL_GRXNTUPLE; + * now deprecated + * @ETH_SS_FEATURES: Device feature names + */ enum ethtool_stringset { ETH_SS_TEST = 0, ETH_SS_STATS, ETH_SS_PRIV_FLAGS, - ETH_SS_NTUPLE_FILTERS, /* Do not use, GRXNTUPLE is now deprecated */ + ETH_SS_NTUPLE_FILTERS, ETH_SS_FEATURES, }; -/* for passing string sets for data tagging */ +/** + * struct ethtool_gstrings - string set for data tagging + * @cmd: Command number = %ETHTOOL_GSTRINGS + * @string_set: String set ID; one of &enum ethtool_stringset + * @len: On return, the number of strings in the string set + * @data: Buffer for strings. Each string is null-padded to a size of + * %ETH_GSTRING_LEN. + * + * Users must use %ETHTOOL_GSSET_INFO to find the number of strings in + * the string set. They must allocate a buffer of the appropriate + * size immediately following this structure. + */ struct ethtool_gstrings { - __u32 cmd; /* ETHTOOL_GSTRINGS */ - __u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/ - __u32 len; /* number of strings in the string set */ + __u32 cmd; + __u32 string_set; + __u32 len; __u8 data[0]; }; +/** + * struct ethtool_sset_info - string set information + * @cmd: Command number = %ETHTOOL_GSSET_INFO + * @sset_mask: On entry, a bitmask of string sets to query, with bits + * numbered according to &enum ethtool_stringset. On return, a + * bitmask of those string sets queried that are supported. + * @data: Buffer for string set sizes. On return, this contains the + * size of each string set that was queried and supported, in + * order of ID. + * + * Example: The user passes in @sset_mask = 0x7 (sets 0, 1, 2) and on + * return @sset_mask == 0x6 (sets 1, 2). Then @data[0] contains the + * size of set 1 and @data[1] contains the size of set 2. + * + * Users must allocate a buffer of the appropriate size (4 * number of + * sets queried) immediately following this structure. + */ struct ethtool_sset_info { - __u32 cmd; /* ETHTOOL_GSSET_INFO */ + __u32 cmd; __u32 reserved; - __u64 sset_mask; /* input: each bit selects an sset to query */ - /* output: each bit a returned sset */ - __u32 data[0]; /* ETH_SS_xxx count, in order, based on bits - in sset_mask. One bit implies one - __u32, two bits implies two - __u32's, etc. */ + __u64 sset_mask; + __u32 data[0]; }; /** @@ -393,24 +576,58 @@ enum ethtool_test_flags { ETH_TEST_FL_EXTERNAL_LB_DONE = (1 << 3), }; -/* for requesting NIC test and getting results*/ +/** + * struct ethtool_test - device self-test invocation + * @cmd: Command number = %ETHTOOL_TEST + * @flags: A bitmask of flags from &enum ethtool_test_flags. Some + * flags may be set by the user on entry; others may be set by + * the driver on return. + * @len: On return, the number of test results + * @data: Array of test results + * + * Users must use %ETHTOOL_GSSET_INFO or %ETHTOOL_GDRVINFO to find the + * number of test results that will be returned. They must allocate a + * buffer of the appropriate size (8 * number of results) immediately + * following this structure. + */ struct ethtool_test { - __u32 cmd; /* ETHTOOL_TEST */ - __u32 flags; /* ETH_TEST_FL_xxx */ + __u32 cmd; + __u32 flags; __u32 reserved; - __u32 len; /* result length, in number of u64 elements */ + __u32 len; __u64 data[0]; }; -/* for dumping NIC-specific statistics */ +/** + * struct ethtool_stats - device-specific statistics + * @cmd: Command number = %ETHTOOL_GSTATS + * @n_stats: On return, the number of statistics + * @data: Array of statistics + * + * Users must use %ETHTOOL_GSSET_INFO or %ETHTOOL_GDRVINFO to find the + * number of statistics that will be returned. They must allocate a + * buffer of the appropriate size (8 * number of statistics) + * immediately following this structure. + */ struct ethtool_stats { - __u32 cmd; /* ETHTOOL_GSTATS */ - __u32 n_stats; /* number of u64's being returned */ + __u32 cmd; + __u32 n_stats; __u64 data[0]; }; +/** + * struct ethtool_perm_addr - permanent hardware address + * @cmd: Command number = %ETHTOOL_GPERMADDR + * @size: On entry, the size of the buffer. On return, the size of the + * address. The command fails if the buffer is too small. + * @data: Buffer for the address + * + * Users must allocate the buffer immediately following this structure. + * A buffer size of %MAX_ADDR_LEN should be sufficient for any address + * type. + */ struct ethtool_perm_addr { - __u32 cmd; /* ETHTOOL_GPERMADDR */ + __u32 cmd; __u32 size; __u8 data[0]; }; @@ -593,7 +810,7 @@ struct ethtool_rx_flow_spec { * %ETHTOOL_SRXCLSRLINS may add the rule at any suitable unused * location, and may remove a rule at a later location (lower * priority) that matches exactly the same set of flows. The special - * values are: %RX_CLS_LOC_ANY, selecting any location; + * values are %RX_CLS_LOC_ANY, selecting any location; * %RX_CLS_LOC_FIRST, selecting the first suitable location (maximum * priority); and %RX_CLS_LOC_LAST, selecting the last suitable * location (minimum priority). Additional special values may be @@ -630,6 +847,38 @@ struct ethtool_rxfh_indir { }; /** + * struct ethtool_rxfh - command to get/set RX flow hash indir or/and hash key. + * @cmd: Specific command number - %ETHTOOL_GRSSH or %ETHTOOL_SRSSH + * @rss_context: RSS context identifier. + * @indir_size: On entry, the array size of the user buffer for the + * indirection table, which may be zero, or (for %ETHTOOL_SRSSH), + * %ETH_RXFH_INDIR_NO_CHANGE. On return from %ETHTOOL_GRSSH, + * the array size of the hardware indirection table. + * @key_size: On entry, the array size of the user buffer for the hash key, + * which may be zero. On return from %ETHTOOL_GRSSH, the size of the + * hardware hash key. + * @rsvd: Reserved for future extensions. + * @rss_config: RX ring/queue index for each hash value i.e., indirection table + * of @indir_size __u32 elements, followed by hash key of @key_size + * bytes. + * + * For %ETHTOOL_GRSSH, a @indir_size and key_size of zero means that only the + * size should be returned. For %ETHTOOL_SRSSH, an @indir_size of + * %ETH_RXFH_INDIR_NO_CHANGE means that indir table setting is not requested + * and a @indir_size of zero means the indir table should be reset to default + * values. + */ +struct ethtool_rxfh { + __u32 cmd; + __u32 rss_context; + __u32 indir_size; + __u32 key_size; + __u32 rsvd[2]; + __u32 rss_config[0]; +}; +#define ETH_RXFH_INDIR_NO_CHANGE 0xffffffff + +/** * struct ethtool_rx_ntuple_flow_spec - specification for RX flow filter * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW * @h_u: Flow field values to match (dependent on @flow_type) @@ -704,9 +953,6 @@ struct ethtool_flash { * for %ETHTOOL_GET_DUMP_FLAG command * @data: data collected for get dump data operation */ - -#define ETH_FW_DUMP_DISABLE 0 - struct ethtool_dump { __u32 cmd; __u32 version; @@ -715,6 +961,8 @@ struct ethtool_dump { __u8 data[0]; }; +#define ETH_FW_DUMP_DISABLE 0 + /* for returning and changing feature sets */ /** @@ -734,8 +982,9 @@ struct ethtool_get_features_block { /** * struct ethtool_gfeatures - command to get state of device's features * @cmd: command number = %ETHTOOL_GFEATURES - * @size: in: number of elements in the features[] array; - * out: number of elements in features[] needed to hold all features + * @size: On entry, the number of elements in the features[] array; + * on return, the number of elements in features[] needed to hold + * all features * @features: state of features */ struct ethtool_gfeatures { @@ -901,11 +1150,13 @@ enum ethtool_sfeatures_retval_bits { #define ETHTOOL_GEEE 0x00000044 /* Get EEE settings */ #define ETHTOOL_SEEE 0x00000045 /* Set EEE settings */ +#define ETHTOOL_GRSSH 0x00000046 /* Get RX flow hash configuration */ +#define ETHTOOL_SRSSH 0x00000047 /* Set RX flow hash configuration */ + /* compatibility with older code */ #define SPARC_ETH_GSET ETHTOOL_GSET #define SPARC_ETH_SSET ETHTOOL_SSET -/* Indicates what features are supported by the interface. */ #define SUPPORTED_10baseT_Half (1 << 0) #define SUPPORTED_10baseT_Full (1 << 1) #define SUPPORTED_100baseT_Half (1 << 2) @@ -934,7 +1185,6 @@ enum ethtool_sfeatures_retval_bits { #define SUPPORTED_40000baseSR4_Full (1 << 25) #define SUPPORTED_40000baseLR4_Full (1 << 26) -/* Indicates what features are advertised by the interface. */ #define ADVERTISED_10baseT_Half (1 << 0) #define ADVERTISED_10baseT_Full (1 << 1) #define ADVERTISED_100baseT_Half (1 << 2) @@ -993,15 +1243,13 @@ enum ethtool_sfeatures_retval_bits { #define PORT_OTHER 0xff /* Which transceiver to use. */ -#define XCVR_INTERNAL 0x00 -#define XCVR_EXTERNAL 0x01 +#define XCVR_INTERNAL 0x00 /* PHY and MAC are in the same package */ +#define XCVR_EXTERNAL 0x01 /* PHY and MAC are in different packages */ #define XCVR_DUMMY1 0x02 #define XCVR_DUMMY2 0x03 #define XCVR_DUMMY3 0x04 -/* Enable or disable autonegotiation. If this is set to enable, - * the forced link modes above are completely ignored. - */ +/* Enable or disable autonegotiation. */ #define AUTONEG_DISABLE 0x00 #define AUTONEG_ENABLE 0x01 diff --git a/include/uapi/linux/eventpoll.h b/include/uapi/linux/eventpoll.h index 2c267bcbb85..bc81fb2e1f0 100644 --- a/include/uapi/linux/eventpoll.h +++ b/include/uapi/linux/eventpoll.h @@ -61,5 +61,16 @@ struct epoll_event { __u64 data; } EPOLL_PACKED; - +#ifdef CONFIG_PM_SLEEP +static inline void ep_take_care_of_epollwakeup(struct epoll_event *epev) +{ + if ((epev->events & EPOLLWAKEUP) && !capable(CAP_BLOCK_SUSPEND)) + epev->events &= ~EPOLLWAKEUP; +} +#else +static inline void ep_take_care_of_epollwakeup(struct epoll_event *epev) +{ + epev->events &= ~EPOLLWAKEUP; +} +#endif #endif /* _UAPI_LINUX_EVENTPOLL_H */ diff --git a/include/uapi/linux/falloc.h b/include/uapi/linux/falloc.h index 990c4ccf8b6..d1197ae3723 100644 --- a/include/uapi/linux/falloc.h +++ b/include/uapi/linux/falloc.h @@ -5,5 +5,40 @@ #define FALLOC_FL_PUNCH_HOLE 0x02 /* de-allocates range */ #define FALLOC_FL_NO_HIDE_STALE 0x04 /* reserved codepoint */ +/* + * FALLOC_FL_COLLAPSE_RANGE is used to remove a range of a file + * without leaving a hole in the file. The contents of the file beyond + * the range being removed is appended to the start offset of the range + * being removed (i.e. the hole that was punched is "collapsed"), + * resulting in a file layout that looks like the range that was + * removed never existed. As such collapsing a range of a file changes + * the size of the file, reducing it by the same length of the range + * that has been removed by the operation. + * + * Different filesystems may implement different limitations on the + * granularity of the operation. Most will limit operations to + * filesystem block size boundaries, but this boundary may be larger or + * smaller depending on the filesystem and/or the configuration of the + * filesystem or file. + * + * Attempting to collapse a range that crosses the end of the file is + * considered an illegal operation - just use ftruncate(2) if you need + * to collapse a range that crosses EOF. + */ +#define FALLOC_FL_COLLAPSE_RANGE 0x08 + +/* + * FALLOC_FL_ZERO_RANGE is used to convert a range of file to zeros preferably + * without issuing data IO. Blocks should be preallocated for the regions that + * span holes in the file, and the entire range is preferable converted to + * unwritten extents - even though file system may choose to zero out the + * extent or do whatever which will result in reading zeros from the range + * while the range remains allocated for the file. + * + * This can be also used to preallocate blocks past EOF in the same way as + * with fallocate. Flag FALLOC_FL_KEEP_SIZE should cause the inode + * size to remain the same. + */ +#define FALLOC_FL_ZERO_RANGE 0x10 #endif /* _UAPI_FALLOC_H_ */ diff --git a/include/uapi/linux/fd.h b/include/uapi/linux/fd.h index f1f3dd5981b..84c517cbce9 100644 --- a/include/uapi/linux/fd.h +++ b/include/uapi/linux/fd.h @@ -185,7 +185,8 @@ enum { * to clear media change status */ FD_UNUSED_BIT, FD_DISK_CHANGED_BIT, /* disk has been changed since last i/o */ - FD_DISK_WRITABLE_BIT /* disk is writable */ + FD_DISK_WRITABLE_BIT, /* disk is writable */ + FD_OPEN_SHOULD_FAIL_BIT }; #define FDSETDRVPRM _IOW(2, 0x90, struct floppy_drive_params) diff --git a/include/uapi/linux/fib_rules.h b/include/uapi/linux/fib_rules.h index 51da65b68b8..2b82d7e3097 100644 --- a/include/uapi/linux/fib_rules.h +++ b/include/uapi/linux/fib_rules.h @@ -44,8 +44,8 @@ enum { FRA_FWMARK, /* mark */ FRA_FLOW, /* flow/class id */ FRA_UNUSED6, - FRA_UNUSED7, - FRA_UNUSED8, + FRA_SUPPRESS_IFGROUP, + FRA_SUPPRESS_PREFIXLEN, FRA_TABLE, /* Extended table id */ FRA_FWMASK, /* mask for netfilter mark */ FRA_OIFNAME, diff --git a/include/uapi/linux/fiemap.h b/include/uapi/linux/fiemap.h index d830747f5c0..0c51d617dae 100644 --- a/include/uapi/linux/fiemap.h +++ b/include/uapi/linux/fiemap.h @@ -40,6 +40,7 @@ struct fiemap { #define FIEMAP_FLAG_SYNC 0x00000001 /* sync file data before map */ #define FIEMAP_FLAG_XATTR 0x00000002 /* map extended attribute tree */ +#define FIEMAP_FLAG_CACHE 0x00000004 /* request caching of the extents */ #define FIEMAP_FLAGS_COMPAT (FIEMAP_FLAG_SYNC | FIEMAP_FLAG_XATTR) diff --git a/include/uapi/linux/filter.h b/include/uapi/linux/filter.h index 9cfde694109..253b4d42cf2 100644 --- a/include/uapi/linux/filter.h +++ b/include/uapi/linux/filter.h @@ -129,7 +129,9 @@ struct sock_fprog { /* Required for SO_ATTACH_FILTER. */ #define SKF_AD_ALU_XOR_X 40 #define SKF_AD_VLAN_TAG 44 #define SKF_AD_VLAN_TAG_PRESENT 48 -#define SKF_AD_MAX 52 +#define SKF_AD_PAY_OFFSET 52 +#define SKF_AD_RANDOM 56 +#define SKF_AD_MAX 60 #define SKF_NET_OFF (-0x100000) #define SKF_LL_OFF (-0x200000) diff --git a/include/uapi/linux/firewire-cdev.h b/include/uapi/linux/firewire-cdev.h index d5003695349..1db453e4b55 100644 --- a/include/uapi/linux/firewire-cdev.h +++ b/include/uapi/linux/firewire-cdev.h @@ -215,8 +215,8 @@ struct fw_cdev_event_request2 { * with the %FW_CDEV_ISO_INTERRUPT bit set, when explicitly requested with * %FW_CDEV_IOC_FLUSH_ISO, or when there have been so many completed packets * without the interrupt bit set that the kernel's internal buffer for @header - * is about to overflow. (In the last case, kernels with ABI version < 5 drop - * header data up to the next interrupt packet.) + * is about to overflow. (In the last case, ABI versions < 5 drop header data + * up to the next interrupt packet.) * * Isochronous transmit events (context type %FW_CDEV_ISO_CONTEXT_TRANSMIT): * diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h index 780d4c6093e..ca1a11bb444 100644 --- a/include/uapi/linux/fs.h +++ b/include/uapi/linux/fs.h @@ -35,6 +35,9 @@ #define SEEK_HOLE 4 /* seek to the next hole */ #define SEEK_MAX SEEK_HOLE +#define RENAME_NOREPLACE (1 << 0) /* Don't overwrite target */ +#define RENAME_EXCHANGE (1 << 1) /* Exchange source and dest */ + struct fstrim_range { __u64 start; __u64 len; @@ -49,9 +52,9 @@ struct files_stat_struct { }; struct inodes_stat_t { - int nr_inodes; - int nr_unused; - int dummy[5]; /* padding for sysctl ABI compatibility */ + long nr_inodes; + long nr_unused; + long dummy[5]; /* padding for sysctl ABI compatibility */ }; @@ -86,6 +89,8 @@ struct inodes_stat_t { #define MS_KERNMOUNT (1<<22) /* this is a kern_mount call */ #define MS_I_VERSION (1<<23) /* Update inode I_version field */ #define MS_STRICTATIME (1<<24) /* Always perform atime updates */ + +/* These sb flags are internal to the kernel */ #define MS_NOSEC (1<<28) #define MS_BORN (1<<29) #define MS_ACTIVE (1<<30) diff --git a/include/uapi/linux/fuse.h b/include/uapi/linux/fuse.h index d8c713e148e..25084a052a1 100644 --- a/include/uapi/linux/fuse.h +++ b/include/uapi/linux/fuse.h @@ -1,9 +1,35 @@ /* - FUSE: Filesystem in Userspace + This file defines the kernel interface of FUSE Copyright (C) 2001-2008 Miklos Szeredi <miklos@szeredi.hu> This program can be distributed under the terms of the GNU GPL. See the file COPYING. + + This -- and only this -- header file may also be distributed under + the terms of the BSD Licence as follows: + + Copyright (C) 2001-2007 Miklos Szeredi. All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + 1. Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND + ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE + FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + SUCH DAMAGE. */ /* @@ -60,12 +86,32 @@ * * 7.20 * - add FUSE_AUTO_INVAL_DATA + * + * 7.21 + * - add FUSE_READDIRPLUS + * - send the requested events in POLL request + * + * 7.22 + * - add FUSE_ASYNC_DIO + * + * 7.23 + * - add FUSE_WRITEBACK_CACHE + * - add time_gran to fuse_init_out + * - add reserved space to fuse_init_out + * - add FATTR_CTIME + * - add ctime and ctimensec to fuse_setattr_in + * - add FUSE_RENAME2 request + * - add FUSE_NO_OPEN_SUPPORT flag */ #ifndef _LINUX_FUSE_H #define _LINUX_FUSE_H +#ifdef __KERNEL__ #include <linux/types.h> +#else +#include <stdint.h> +#endif /* * Version negotiation: @@ -91,7 +137,7 @@ #define FUSE_KERNEL_VERSION 7 /** Minor version number of this interface */ -#define FUSE_KERNEL_MINOR_VERSION 20 +#define FUSE_KERNEL_MINOR_VERSION 23 /** The node ID of the root inode */ #define FUSE_ROOT_ID 1 @@ -100,42 +146,42 @@ userspace works under 64bit kernels */ struct fuse_attr { - __u64 ino; - __u64 size; - __u64 blocks; - __u64 atime; - __u64 mtime; - __u64 ctime; - __u32 atimensec; - __u32 mtimensec; - __u32 ctimensec; - __u32 mode; - __u32 nlink; - __u32 uid; - __u32 gid; - __u32 rdev; - __u32 blksize; - __u32 padding; + uint64_t ino; + uint64_t size; + uint64_t blocks; + uint64_t atime; + uint64_t mtime; + uint64_t ctime; + uint32_t atimensec; + uint32_t mtimensec; + uint32_t ctimensec; + uint32_t mode; + uint32_t nlink; + uint32_t uid; + uint32_t gid; + uint32_t rdev; + uint32_t blksize; + uint32_t padding; }; struct fuse_kstatfs { - __u64 blocks; - __u64 bfree; - __u64 bavail; - __u64 files; - __u64 ffree; - __u32 bsize; - __u32 namelen; - __u32 frsize; - __u32 padding; - __u32 spare[6]; + uint64_t blocks; + uint64_t bfree; + uint64_t bavail; + uint64_t files; + uint64_t ffree; + uint32_t bsize; + uint32_t namelen; + uint32_t frsize; + uint32_t padding; + uint32_t spare[6]; }; struct fuse_file_lock { - __u64 start; - __u64 end; - __u32 type; - __u32 pid; /* tgid */ + uint64_t start; + uint64_t end; + uint32_t type; + uint32_t pid; /* tgid */ }; /** @@ -151,6 +197,7 @@ struct fuse_file_lock { #define FATTR_ATIME_NOW (1 << 7) #define FATTR_MTIME_NOW (1 << 8) #define FATTR_LOCKOWNER (1 << 9) +#define FATTR_CTIME (1 << 10) /** * Flags returned by the OPEN request @@ -179,6 +226,11 @@ struct fuse_file_lock { * FUSE_FLOCK_LOCKS: remote locking for BSD style file locks * FUSE_HAS_IOCTL_DIR: kernel supports ioctl on directories * FUSE_AUTO_INVAL_DATA: automatically invalidate cached pages + * FUSE_DO_READDIRPLUS: do READDIRPLUS (READDIR+LOOKUP in one) + * FUSE_READDIRPLUS_AUTO: adaptive readdirplus + * FUSE_ASYNC_DIO: asynchronous direct I/O submission + * FUSE_WRITEBACK_CACHE: use writeback cache for buffered writes + * FUSE_NO_OPEN_SUPPORT: kernel supports zero-message opens */ #define FUSE_ASYNC_READ (1 << 0) #define FUSE_POSIX_LOCKS (1 << 1) @@ -193,6 +245,11 @@ struct fuse_file_lock { #define FUSE_FLOCK_LOCKS (1 << 10) #define FUSE_HAS_IOCTL_DIR (1 << 11) #define FUSE_AUTO_INVAL_DATA (1 << 12) +#define FUSE_DO_READDIRPLUS (1 << 13) +#define FUSE_READDIRPLUS_AUTO (1 << 14) +#define FUSE_ASYNC_DIO (1 << 15) +#define FUSE_WRITEBACK_CACHE (1 << 16) +#define FUSE_NO_OPEN_SUPPORT (1 << 17) /** * CUSE INIT request/reply flags @@ -299,6 +356,8 @@ enum fuse_opcode { FUSE_NOTIFY_REPLY = 41, FUSE_BATCH_FORGET = 42, FUSE_FALLOCATE = 43, + FUSE_READDIRPLUS = 44, + FUSE_RENAME2 = 45, /* CUSE specific operations */ CUSE_INIT = 4096, @@ -320,143 +379,149 @@ enum fuse_notify_code { #define FUSE_COMPAT_ENTRY_OUT_SIZE 120 struct fuse_entry_out { - __u64 nodeid; /* Inode ID */ - __u64 generation; /* Inode generation: nodeid:gen must - be unique for the fs's lifetime */ - __u64 entry_valid; /* Cache timeout for the name */ - __u64 attr_valid; /* Cache timeout for the attributes */ - __u32 entry_valid_nsec; - __u32 attr_valid_nsec; + uint64_t nodeid; /* Inode ID */ + uint64_t generation; /* Inode generation: nodeid:gen must + be unique for the fs's lifetime */ + uint64_t entry_valid; /* Cache timeout for the name */ + uint64_t attr_valid; /* Cache timeout for the attributes */ + uint32_t entry_valid_nsec; + uint32_t attr_valid_nsec; struct fuse_attr attr; }; struct fuse_forget_in { - __u64 nlookup; + uint64_t nlookup; }; struct fuse_forget_one { - __u64 nodeid; - __u64 nlookup; + uint64_t nodeid; + uint64_t nlookup; }; struct fuse_batch_forget_in { - __u32 count; - __u32 dummy; + uint32_t count; + uint32_t dummy; }; struct fuse_getattr_in { - __u32 getattr_flags; - __u32 dummy; - __u64 fh; + uint32_t getattr_flags; + uint32_t dummy; + uint64_t fh; }; #define FUSE_COMPAT_ATTR_OUT_SIZE 96 struct fuse_attr_out { - __u64 attr_valid; /* Cache timeout for the attributes */ - __u32 attr_valid_nsec; - __u32 dummy; + uint64_t attr_valid; /* Cache timeout for the attributes */ + uint32_t attr_valid_nsec; + uint32_t dummy; struct fuse_attr attr; }; #define FUSE_COMPAT_MKNOD_IN_SIZE 8 struct fuse_mknod_in { - __u32 mode; - __u32 rdev; - __u32 umask; - __u32 padding; + uint32_t mode; + uint32_t rdev; + uint32_t umask; + uint32_t padding; }; struct fuse_mkdir_in { - __u32 mode; - __u32 umask; + uint32_t mode; + uint32_t umask; }; struct fuse_rename_in { - __u64 newdir; + uint64_t newdir; +}; + +struct fuse_rename2_in { + uint64_t newdir; + uint32_t flags; + uint32_t padding; }; struct fuse_link_in { - __u64 oldnodeid; + uint64_t oldnodeid; }; struct fuse_setattr_in { - __u32 valid; - __u32 padding; - __u64 fh; - __u64 size; - __u64 lock_owner; - __u64 atime; - __u64 mtime; - __u64 unused2; - __u32 atimensec; - __u32 mtimensec; - __u32 unused3; - __u32 mode; - __u32 unused4; - __u32 uid; - __u32 gid; - __u32 unused5; + uint32_t valid; + uint32_t padding; + uint64_t fh; + uint64_t size; + uint64_t lock_owner; + uint64_t atime; + uint64_t mtime; + uint64_t ctime; + uint32_t atimensec; + uint32_t mtimensec; + uint32_t ctimensec; + uint32_t mode; + uint32_t unused4; + uint32_t uid; + uint32_t gid; + uint32_t unused5; }; struct fuse_open_in { - __u32 flags; - __u32 unused; + uint32_t flags; + uint32_t unused; }; struct fuse_create_in { - __u32 flags; - __u32 mode; - __u32 umask; - __u32 padding; + uint32_t flags; + uint32_t mode; + uint32_t umask; + uint32_t padding; }; struct fuse_open_out { - __u64 fh; - __u32 open_flags; - __u32 padding; + uint64_t fh; + uint32_t open_flags; + uint32_t padding; }; struct fuse_release_in { - __u64 fh; - __u32 flags; - __u32 release_flags; - __u64 lock_owner; + uint64_t fh; + uint32_t flags; + uint32_t release_flags; + uint64_t lock_owner; }; struct fuse_flush_in { - __u64 fh; - __u32 unused; - __u32 padding; - __u64 lock_owner; + uint64_t fh; + uint32_t unused; + uint32_t padding; + uint64_t lock_owner; }; struct fuse_read_in { - __u64 fh; - __u64 offset; - __u32 size; - __u32 read_flags; - __u64 lock_owner; - __u32 flags; - __u32 padding; + uint64_t fh; + uint64_t offset; + uint32_t size; + uint32_t read_flags; + uint64_t lock_owner; + uint32_t flags; + uint32_t padding; }; #define FUSE_COMPAT_WRITE_IN_SIZE 24 struct fuse_write_in { - __u64 fh; - __u64 offset; - __u32 size; - __u32 write_flags; - __u64 lock_owner; - __u32 flags; - __u32 padding; + uint64_t fh; + uint64_t offset; + uint32_t size; + uint32_t write_flags; + uint64_t lock_owner; + uint32_t flags; + uint32_t padding; }; struct fuse_write_out { - __u32 size; - __u32 padding; + uint32_t size; + uint32_t padding; }; #define FUSE_COMPAT_STATFS_SIZE 48 @@ -466,32 +531,32 @@ struct fuse_statfs_out { }; struct fuse_fsync_in { - __u64 fh; - __u32 fsync_flags; - __u32 padding; + uint64_t fh; + uint32_t fsync_flags; + uint32_t padding; }; struct fuse_setxattr_in { - __u32 size; - __u32 flags; + uint32_t size; + uint32_t flags; }; struct fuse_getxattr_in { - __u32 size; - __u32 padding; + uint32_t size; + uint32_t padding; }; struct fuse_getxattr_out { - __u32 size; - __u32 padding; + uint32_t size; + uint32_t padding; }; struct fuse_lk_in { - __u64 fh; - __u64 owner; + uint64_t fh; + uint64_t owner; struct fuse_file_lock lk; - __u32 lk_flags; - __u32 padding; + uint32_t lk_flags; + uint32_t padding; }; struct fuse_lk_out { @@ -499,179 +564,195 @@ struct fuse_lk_out { }; struct fuse_access_in { - __u32 mask; - __u32 padding; + uint32_t mask; + uint32_t padding; }; struct fuse_init_in { - __u32 major; - __u32 minor; - __u32 max_readahead; - __u32 flags; + uint32_t major; + uint32_t minor; + uint32_t max_readahead; + uint32_t flags; }; +#define FUSE_COMPAT_INIT_OUT_SIZE 8 +#define FUSE_COMPAT_22_INIT_OUT_SIZE 24 + struct fuse_init_out { - __u32 major; - __u32 minor; - __u32 max_readahead; - __u32 flags; - __u16 max_background; - __u16 congestion_threshold; - __u32 max_write; + uint32_t major; + uint32_t minor; + uint32_t max_readahead; + uint32_t flags; + uint16_t max_background; + uint16_t congestion_threshold; + uint32_t max_write; + uint32_t time_gran; + uint32_t unused[9]; }; #define CUSE_INIT_INFO_MAX 4096 struct cuse_init_in { - __u32 major; - __u32 minor; - __u32 unused; - __u32 flags; + uint32_t major; + uint32_t minor; + uint32_t unused; + uint32_t flags; }; struct cuse_init_out { - __u32 major; - __u32 minor; - __u32 unused; - __u32 flags; - __u32 max_read; - __u32 max_write; - __u32 dev_major; /* chardev major */ - __u32 dev_minor; /* chardev minor */ - __u32 spare[10]; + uint32_t major; + uint32_t minor; + uint32_t unused; + uint32_t flags; + uint32_t max_read; + uint32_t max_write; + uint32_t dev_major; /* chardev major */ + uint32_t dev_minor; /* chardev minor */ + uint32_t spare[10]; }; struct fuse_interrupt_in { - __u64 unique; + uint64_t unique; }; struct fuse_bmap_in { - __u64 block; - __u32 blocksize; - __u32 padding; + uint64_t block; + uint32_t blocksize; + uint32_t padding; }; struct fuse_bmap_out { - __u64 block; + uint64_t block; }; struct fuse_ioctl_in { - __u64 fh; - __u32 flags; - __u32 cmd; - __u64 arg; - __u32 in_size; - __u32 out_size; + uint64_t fh; + uint32_t flags; + uint32_t cmd; + uint64_t arg; + uint32_t in_size; + uint32_t out_size; }; struct fuse_ioctl_iovec { - __u64 base; - __u64 len; + uint64_t base; + uint64_t len; }; struct fuse_ioctl_out { - __s32 result; - __u32 flags; - __u32 in_iovs; - __u32 out_iovs; + int32_t result; + uint32_t flags; + uint32_t in_iovs; + uint32_t out_iovs; }; struct fuse_poll_in { - __u64 fh; - __u64 kh; - __u32 flags; - __u32 padding; + uint64_t fh; + uint64_t kh; + uint32_t flags; + uint32_t events; }; struct fuse_poll_out { - __u32 revents; - __u32 padding; + uint32_t revents; + uint32_t padding; }; struct fuse_notify_poll_wakeup_out { - __u64 kh; + uint64_t kh; }; struct fuse_fallocate_in { - __u64 fh; - __u64 offset; - __u64 length; - __u32 mode; - __u32 padding; + uint64_t fh; + uint64_t offset; + uint64_t length; + uint32_t mode; + uint32_t padding; }; struct fuse_in_header { - __u32 len; - __u32 opcode; - __u64 unique; - __u64 nodeid; - __u32 uid; - __u32 gid; - __u32 pid; - __u32 padding; + uint32_t len; + uint32_t opcode; + uint64_t unique; + uint64_t nodeid; + uint32_t uid; + uint32_t gid; + uint32_t pid; + uint32_t padding; }; struct fuse_out_header { - __u32 len; - __s32 error; - __u64 unique; + uint32_t len; + int32_t error; + uint64_t unique; }; struct fuse_dirent { - __u64 ino; - __u64 off; - __u32 namelen; - __u32 type; + uint64_t ino; + uint64_t off; + uint32_t namelen; + uint32_t type; char name[]; }; #define FUSE_NAME_OFFSET offsetof(struct fuse_dirent, name) -#define FUSE_DIRENT_ALIGN(x) (((x) + sizeof(__u64) - 1) & ~(sizeof(__u64) - 1)) +#define FUSE_DIRENT_ALIGN(x) \ + (((x) + sizeof(uint64_t) - 1) & ~(sizeof(uint64_t) - 1)) #define FUSE_DIRENT_SIZE(d) \ FUSE_DIRENT_ALIGN(FUSE_NAME_OFFSET + (d)->namelen) +struct fuse_direntplus { + struct fuse_entry_out entry_out; + struct fuse_dirent dirent; +}; + +#define FUSE_NAME_OFFSET_DIRENTPLUS \ + offsetof(struct fuse_direntplus, dirent.name) +#define FUSE_DIRENTPLUS_SIZE(d) \ + FUSE_DIRENT_ALIGN(FUSE_NAME_OFFSET_DIRENTPLUS + (d)->dirent.namelen) + struct fuse_notify_inval_inode_out { - __u64 ino; - __s64 off; - __s64 len; + uint64_t ino; + int64_t off; + int64_t len; }; struct fuse_notify_inval_entry_out { - __u64 parent; - __u32 namelen; - __u32 padding; + uint64_t parent; + uint32_t namelen; + uint32_t padding; }; struct fuse_notify_delete_out { - __u64 parent; - __u64 child; - __u32 namelen; - __u32 padding; + uint64_t parent; + uint64_t child; + uint32_t namelen; + uint32_t padding; }; struct fuse_notify_store_out { - __u64 nodeid; - __u64 offset; - __u32 size; - __u32 padding; + uint64_t nodeid; + uint64_t offset; + uint32_t size; + uint32_t padding; }; struct fuse_notify_retrieve_out { - __u64 notify_unique; - __u64 nodeid; - __u64 offset; - __u32 size; - __u32 padding; + uint64_t notify_unique; + uint64_t nodeid; + uint64_t offset; + uint32_t size; + uint32_t padding; }; /* Matches the size of fuse_write_in */ struct fuse_notify_retrieve_in { - __u64 dummy1; - __u64 offset; - __u32 size; - __u32 dummy2; - __u64 dummy3; - __u64 dummy4; + uint64_t dummy1; + uint64_t offset; + uint32_t size; + uint32_t dummy2; + uint64_t dummy3; + uint64_t dummy4; }; #endif /* _LINUX_FUSE_H */ diff --git a/include/uapi/linux/gen_stats.h b/include/uapi/linux/gen_stats.h index 552c8a0a12d..6487317ea61 100644 --- a/include/uapi/linux/gen_stats.h +++ b/include/uapi/linux/gen_stats.h @@ -9,6 +9,7 @@ enum { TCA_STATS_RATE_EST, TCA_STATS_QUEUE, TCA_STATS_APP, + TCA_STATS_RATE_EST64, __TCA_STATS_MAX, }; #define TCA_STATS_MAX (__TCA_STATS_MAX - 1) @@ -38,6 +39,16 @@ struct gnet_stats_rate_est { }; /** + * struct gnet_stats_rate_est64 - rate estimator + * @bps: current byte rate + * @pps: current packet rate + */ +struct gnet_stats_rate_est64 { + __u64 bps; + __u64 pps; +}; + +/** * struct gnet_stats_queue - queuing statistics * @qlen: queue length * @backlog: backlog size of queue diff --git a/include/uapi/linux/genetlink.h b/include/uapi/linux/genetlink.h index c880a417d8a..c3363ba1ae0 100644 --- a/include/uapi/linux/genetlink.h +++ b/include/uapi/linux/genetlink.h @@ -27,6 +27,8 @@ struct genlmsghdr { */ #define GENL_ID_GENERATE 0 #define GENL_ID_CTRL NLMSG_MIN_TYPE +#define GENL_ID_VFS_DQUOT (NLMSG_MIN_TYPE + 1) +#define GENL_ID_PMCRAID (NLMSG_MIN_TYPE + 2) /************************************************************************** * Controller diff --git a/include/uapi/linux/genwqe/genwqe_card.h b/include/uapi/linux/genwqe/genwqe_card.h new file mode 100644 index 00000000000..795e957bb84 --- /dev/null +++ b/include/uapi/linux/genwqe/genwqe_card.h @@ -0,0 +1,500 @@ +#ifndef __GENWQE_CARD_H__ +#define __GENWQE_CARD_H__ + +/** + * IBM Accelerator Family 'GenWQE' + * + * (C) Copyright IBM Corp. 2013 + * + * Author: Frank Haverkamp <haver@linux.vnet.ibm.com> + * Author: Joerg-Stephan Vogt <jsvogt@de.ibm.com> + * Author: Michael Jung <mijung@de.ibm.com> + * Author: Michael Ruettger <michael@ibmra.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License (version 2 only) + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * User-space API for the GenWQE card. For debugging and test purposes + * the register addresses are included here too. + */ + +#include <linux/types.h> +#include <linux/ioctl.h> + +/* Basename of sysfs, debugfs and /dev interfaces */ +#define GENWQE_DEVNAME "genwqe" + +#define GENWQE_TYPE_ALTERA_230 0x00 /* GenWQE4 Stratix-IV-230 */ +#define GENWQE_TYPE_ALTERA_530 0x01 /* GenWQE4 Stratix-IV-530 */ +#define GENWQE_TYPE_ALTERA_A4 0x02 /* GenWQE5 A4 Stratix-V-A4 */ +#define GENWQE_TYPE_ALTERA_A7 0x03 /* GenWQE5 A7 Stratix-V-A7 */ + +/* MMIO Unit offsets: Each UnitID occupies a defined address range */ +#define GENWQE_UID_OFFS(uid) ((uid) << 24) +#define GENWQE_SLU_OFFS GENWQE_UID_OFFS(0) +#define GENWQE_HSU_OFFS GENWQE_UID_OFFS(1) +#define GENWQE_APP_OFFS GENWQE_UID_OFFS(2) +#define GENWQE_MAX_UNITS 3 + +/* Common offsets per UnitID */ +#define IO_EXTENDED_ERROR_POINTER 0x00000048 +#define IO_ERROR_INJECT_SELECTOR 0x00000060 +#define IO_EXTENDED_DIAG_SELECTOR 0x00000070 +#define IO_EXTENDED_DIAG_READ_MBX 0x00000078 +#define IO_EXTENDED_DIAG_MAP(ring) (0x00000500 | ((ring) << 3)) + +#define GENWQE_EXTENDED_DIAG_SELECTOR(ring, trace) (((ring) << 8) | (trace)) + +/* UnitID 0: Service Layer Unit (SLU) */ + +/* SLU: Unit Configuration Register */ +#define IO_SLU_UNITCFG 0x00000000 +#define IO_SLU_UNITCFG_TYPE_MASK 0x000000000ff00000 /* 27:20 */ + +/* SLU: Fault Isolation Register (FIR) (ac_slu_fir) */ +#define IO_SLU_FIR 0x00000008 /* read only, wr direct */ +#define IO_SLU_FIR_CLR 0x00000010 /* read and clear */ + +/* SLU: First Error Capture Register (FEC/WOF) */ +#define IO_SLU_FEC 0x00000018 + +#define IO_SLU_ERR_ACT_MASK 0x00000020 +#define IO_SLU_ERR_ATTN_MASK 0x00000028 +#define IO_SLU_FIRX1_ACT_MASK 0x00000030 +#define IO_SLU_FIRX0_ACT_MASK 0x00000038 +#define IO_SLU_SEC_LEM_DEBUG_OVR 0x00000040 +#define IO_SLU_EXTENDED_ERR_PTR 0x00000048 +#define IO_SLU_COMMON_CONFIG 0x00000060 + +#define IO_SLU_FLASH_FIR 0x00000108 +#define IO_SLU_SLC_FIR 0x00000110 +#define IO_SLU_RIU_TRAP 0x00000280 +#define IO_SLU_FLASH_FEC 0x00000308 +#define IO_SLU_SLC_FEC 0x00000310 + +/* + * The Virtual Function's Access is from offset 0x00010000 + * The Physical Function's Access is from offset 0x00050000 + * Single Shared Registers exists only at offset 0x00060000 + * + * SLC: Queue Virtual Window Window for accessing into a specific VF + * queue. When accessing the 0x10000 space using the 0x50000 address + * segment, the value indicated here is used to specify which VF + * register is decoded. This register, and the 0x50000 register space + * can only be accessed by the PF. Example, if this register is set to + * 0x2, then a read from 0x50000 is the same as a read from 0x10000 + * from VF=2. + */ + +/* SLC: Queue Segment */ +#define IO_SLC_QUEUE_SEGMENT 0x00010000 +#define IO_SLC_VF_QUEUE_SEGMENT 0x00050000 + +/* SLC: Queue Offset */ +#define IO_SLC_QUEUE_OFFSET 0x00010008 +#define IO_SLC_VF_QUEUE_OFFSET 0x00050008 + +/* SLC: Queue Configuration */ +#define IO_SLC_QUEUE_CONFIG 0x00010010 +#define IO_SLC_VF_QUEUE_CONFIG 0x00050010 + +/* SLC: Job Timout/Only accessible for the PF */ +#define IO_SLC_APPJOB_TIMEOUT 0x00010018 +#define IO_SLC_VF_APPJOB_TIMEOUT 0x00050018 +#define TIMEOUT_250MS 0x0000000f +#define HEARTBEAT_DISABLE 0x0000ff00 + +/* SLC: Queue InitSequence Register */ +#define IO_SLC_QUEUE_INITSQN 0x00010020 +#define IO_SLC_VF_QUEUE_INITSQN 0x00050020 + +/* SLC: Queue Wrap */ +#define IO_SLC_QUEUE_WRAP 0x00010028 +#define IO_SLC_VF_QUEUE_WRAP 0x00050028 + +/* SLC: Queue Status */ +#define IO_SLC_QUEUE_STATUS 0x00010100 +#define IO_SLC_VF_QUEUE_STATUS 0x00050100 + +/* SLC: Queue Working Time */ +#define IO_SLC_QUEUE_WTIME 0x00010030 +#define IO_SLC_VF_QUEUE_WTIME 0x00050030 + +/* SLC: Queue Error Counts */ +#define IO_SLC_QUEUE_ERRCNTS 0x00010038 +#define IO_SLC_VF_QUEUE_ERRCNTS 0x00050038 + +/* SLC: Queue Loast Response Word */ +#define IO_SLC_QUEUE_LRW 0x00010040 +#define IO_SLC_VF_QUEUE_LRW 0x00050040 + +/* SLC: Freerunning Timer */ +#define IO_SLC_FREE_RUNNING_TIMER 0x00010108 +#define IO_SLC_VF_FREE_RUNNING_TIMER 0x00050108 + +/* SLC: Queue Virtual Access Region */ +#define IO_PF_SLC_VIRTUAL_REGION 0x00050000 + +/* SLC: Queue Virtual Window */ +#define IO_PF_SLC_VIRTUAL_WINDOW 0x00060000 + +/* SLC: DDCB Application Job Pending [n] (n=0:63) */ +#define IO_PF_SLC_JOBPEND(n) (0x00061000 + 8*(n)) +#define IO_SLC_JOBPEND(n) IO_PF_SLC_JOBPEND(n) + +/* SLC: Parser Trap RAM [n] (n=0:31) */ +#define IO_SLU_SLC_PARSE_TRAP(n) (0x00011000 + 8*(n)) + +/* SLC: Dispatcher Trap RAM [n] (n=0:31) */ +#define IO_SLU_SLC_DISP_TRAP(n) (0x00011200 + 8*(n)) + +/* Global Fault Isolation Register (GFIR) */ +#define IO_SLC_CFGREG_GFIR 0x00020000 +#define GFIR_ERR_TRIGGER 0x0000ffff + +/* SLU: Soft Reset Register */ +#define IO_SLC_CFGREG_SOFTRESET 0x00020018 + +/* SLU: Misc Debug Register */ +#define IO_SLC_MISC_DEBUG 0x00020060 +#define IO_SLC_MISC_DEBUG_CLR 0x00020068 +#define IO_SLC_MISC_DEBUG_SET 0x00020070 + +/* Temperature Sensor Reading */ +#define IO_SLU_TEMPERATURE_SENSOR 0x00030000 +#define IO_SLU_TEMPERATURE_CONFIG 0x00030008 + +/* Voltage Margining Control */ +#define IO_SLU_VOLTAGE_CONTROL 0x00030080 +#define IO_SLU_VOLTAGE_NOMINAL 0x00000000 +#define IO_SLU_VOLTAGE_DOWN5 0x00000006 +#define IO_SLU_VOLTAGE_UP5 0x00000007 + +/* Direct LED Control Register */ +#define IO_SLU_LEDCONTROL 0x00030100 + +/* SLU: Flashbus Direct Access -A5 */ +#define IO_SLU_FLASH_DIRECTACCESS 0x00040010 + +/* SLU: Flashbus Direct Access2 -A5 */ +#define IO_SLU_FLASH_DIRECTACCESS2 0x00040020 + +/* SLU: Flashbus Command Interface -A5 */ +#define IO_SLU_FLASH_CMDINTF 0x00040030 + +/* SLU: BitStream Loaded */ +#define IO_SLU_BITSTREAM 0x00040040 + +/* This Register has a switch which will change the CAs to UR */ +#define IO_HSU_ERR_BEHAVIOR 0x01001010 + +#define IO_SLC2_SQB_TRAP 0x00062000 +#define IO_SLC2_QUEUE_MANAGER_TRAP 0x00062008 +#define IO_SLC2_FLS_MASTER_TRAP 0x00062010 + +/* UnitID 1: HSU Registers */ +#define IO_HSU_UNITCFG 0x01000000 +#define IO_HSU_FIR 0x01000008 +#define IO_HSU_FIR_CLR 0x01000010 +#define IO_HSU_FEC 0x01000018 +#define IO_HSU_ERR_ACT_MASK 0x01000020 +#define IO_HSU_ERR_ATTN_MASK 0x01000028 +#define IO_HSU_FIRX1_ACT_MASK 0x01000030 +#define IO_HSU_FIRX0_ACT_MASK 0x01000038 +#define IO_HSU_SEC_LEM_DEBUG_OVR 0x01000040 +#define IO_HSU_EXTENDED_ERR_PTR 0x01000048 +#define IO_HSU_COMMON_CONFIG 0x01000060 + +/* UnitID 2: Application Unit (APP) */ +#define IO_APP_UNITCFG 0x02000000 +#define IO_APP_FIR 0x02000008 +#define IO_APP_FIR_CLR 0x02000010 +#define IO_APP_FEC 0x02000018 +#define IO_APP_ERR_ACT_MASK 0x02000020 +#define IO_APP_ERR_ATTN_MASK 0x02000028 +#define IO_APP_FIRX1_ACT_MASK 0x02000030 +#define IO_APP_FIRX0_ACT_MASK 0x02000038 +#define IO_APP_SEC_LEM_DEBUG_OVR 0x02000040 +#define IO_APP_EXTENDED_ERR_PTR 0x02000048 +#define IO_APP_COMMON_CONFIG 0x02000060 + +#define IO_APP_DEBUG_REG_01 0x02010000 +#define IO_APP_DEBUG_REG_02 0x02010008 +#define IO_APP_DEBUG_REG_03 0x02010010 +#define IO_APP_DEBUG_REG_04 0x02010018 +#define IO_APP_DEBUG_REG_05 0x02010020 +#define IO_APP_DEBUG_REG_06 0x02010028 +#define IO_APP_DEBUG_REG_07 0x02010030 +#define IO_APP_DEBUG_REG_08 0x02010038 +#define IO_APP_DEBUG_REG_09 0x02010040 +#define IO_APP_DEBUG_REG_10 0x02010048 +#define IO_APP_DEBUG_REG_11 0x02010050 +#define IO_APP_DEBUG_REG_12 0x02010058 +#define IO_APP_DEBUG_REG_13 0x02010060 +#define IO_APP_DEBUG_REG_14 0x02010068 +#define IO_APP_DEBUG_REG_15 0x02010070 +#define IO_APP_DEBUG_REG_16 0x02010078 +#define IO_APP_DEBUG_REG_17 0x02010080 +#define IO_APP_DEBUG_REG_18 0x02010088 + +/* Read/write from/to registers */ +struct genwqe_reg_io { + __u64 num; /* register offset/address */ + __u64 val64; +}; + +/* + * All registers of our card will return values not equal this values. + * If we see IO_ILLEGAL_VALUE on any of our MMIO register reads, the + * card can be considered as unusable. It will need recovery. + */ +#define IO_ILLEGAL_VALUE 0xffffffffffffffffull + +/* + * Generic DDCB execution interface. + * + * This interface is a first prototype resulting from discussions we + * had with other teams which wanted to use the Genwqe card. It allows + * to issue a DDCB request in a generic way. The request will block + * until it finishes or time out with error. + * + * Some DDCBs require DMA addresses to be specified in the ASIV + * block. The interface provies the capability to let the kernel + * driver know where those addresses are by specifying the ATS field, + * such that it can replace the user-space addresses with appropriate + * DMA addresses or DMA addresses of a scatter gather list which is + * dynamically created. + * + * Our hardware will refuse DDCB execution if the ATS field is not as + * expected. That means the DDCB execution engine in the chip knows + * where it expects DMA addresses within the ASIV part of the DDCB and + * will check that against the ATS field definition. Any invalid or + * unknown ATS content will lead to DDCB refusal. + */ + +/* Genwqe chip Units */ +#define DDCB_ACFUNC_SLU 0x00 /* chip service layer unit */ +#define DDCB_ACFUNC_APP 0x01 /* chip application */ + +/* DDCB return codes (RETC) */ +#define DDCB_RETC_IDLE 0x0000 /* Unexecuted/DDCB created */ +#define DDCB_RETC_PENDING 0x0101 /* Pending Execution */ +#define DDCB_RETC_COMPLETE 0x0102 /* Cmd complete. No error */ +#define DDCB_RETC_FAULT 0x0104 /* App Err, recoverable */ +#define DDCB_RETC_ERROR 0x0108 /* App Err, non-recoverable */ +#define DDCB_RETC_FORCED_ERROR 0x01ff /* overwritten by driver */ + +#define DDCB_RETC_UNEXEC 0x0110 /* Unexe/Removed from queue */ +#define DDCB_RETC_TERM 0x0120 /* Terminated */ +#define DDCB_RETC_RES0 0x0140 /* Reserved */ +#define DDCB_RETC_RES1 0x0180 /* Reserved */ + +/* DDCB Command Options (CMDOPT) */ +#define DDCB_OPT_ECHO_FORCE_NO 0x0000 /* ECHO DDCB */ +#define DDCB_OPT_ECHO_FORCE_102 0x0001 /* force return code */ +#define DDCB_OPT_ECHO_FORCE_104 0x0002 +#define DDCB_OPT_ECHO_FORCE_108 0x0003 + +#define DDCB_OPT_ECHO_FORCE_110 0x0004 /* only on PF ! */ +#define DDCB_OPT_ECHO_FORCE_120 0x0005 +#define DDCB_OPT_ECHO_FORCE_140 0x0006 +#define DDCB_OPT_ECHO_FORCE_180 0x0007 + +#define DDCB_OPT_ECHO_COPY_NONE (0 << 5) +#define DDCB_OPT_ECHO_COPY_ALL (1 << 5) + +/* Definitions of Service Layer Commands */ +#define SLCMD_ECHO_SYNC 0x00 /* PF/VF */ +#define SLCMD_MOVE_FLASH 0x06 /* PF only */ +#define SLCMD_MOVE_FLASH_FLAGS_MODE 0x03 /* bit 0 and 1 used for mode */ +#define SLCMD_MOVE_FLASH_FLAGS_DLOAD 0 /* mode: download */ +#define SLCMD_MOVE_FLASH_FLAGS_EMUL 1 /* mode: emulation */ +#define SLCMD_MOVE_FLASH_FLAGS_UPLOAD 2 /* mode: upload */ +#define SLCMD_MOVE_FLASH_FLAGS_VERIFY 3 /* mode: verify */ +#define SLCMD_MOVE_FLASH_FLAG_NOTAP (1 << 2)/* just dump DDCB and exit */ +#define SLCMD_MOVE_FLASH_FLAG_POLL (1 << 3)/* wait for RETC >= 0102 */ +#define SLCMD_MOVE_FLASH_FLAG_PARTITION (1 << 4) +#define SLCMD_MOVE_FLASH_FLAG_ERASE (1 << 5) + +enum genwqe_card_state { + GENWQE_CARD_UNUSED = 0, + GENWQE_CARD_USED = 1, + GENWQE_CARD_FATAL_ERROR = 2, + GENWQE_CARD_STATE_MAX, +}; + +/* common struct for chip image exchange */ +struct genwqe_bitstream { + __u64 data_addr; /* pointer to image data */ + __u32 size; /* size of image file */ + __u32 crc; /* crc of this image */ + __u64 target_addr; /* starting address in Flash */ + __u32 partition; /* '0', '1', or 'v' */ + __u32 uid; /* 1=host/x=dram */ + + __u64 slu_id; /* informational/sim: SluID */ + __u64 app_id; /* informational/sim: AppID */ + + __u16 retc; /* returned from processing */ + __u16 attn; /* attention code from processing */ + __u32 progress; /* progress code from processing */ +}; + +/* Issuing a specific DDCB command */ +#define DDCB_LENGTH 256 /* for debug data */ +#define DDCB_ASIV_LENGTH 104 /* len of the DDCB ASIV array */ +#define DDCB_ASIV_LENGTH_ATS 96 /* ASIV in ATS architecture */ +#define DDCB_ASV_LENGTH 64 /* len of the DDCB ASV array */ +#define DDCB_FIXUPS 12 /* maximum number of fixups */ + +struct genwqe_debug_data { + char driver_version[64]; + __u64 slu_unitcfg; + __u64 app_unitcfg; + + __u8 ddcb_before[DDCB_LENGTH]; + __u8 ddcb_prev[DDCB_LENGTH]; + __u8 ddcb_finished[DDCB_LENGTH]; +}; + +/* + * Address Translation Specification (ATS) definitions + * + * Each 4 bit within the ATS 64-bit word specify the required address + * translation at the defined offset. + * + * 63 LSB + * 6666.5555.5555.5544.4444.4443.3333.3333 ... 11 + * 3210.9876.5432.1098.7654.3210.9876.5432 ... 1098.7654.3210 + * + * offset: 0x00 0x08 0x10 0x18 0x20 0x28 0x30 0x38 ... 0x68 0x70 0x78 + * res res res res ASIV ... + * The first 4 entries in the ATS word are reserved. The following nibbles + * each describe at an 8 byte offset the format of the required data. + */ +#define ATS_TYPE_DATA 0x0ull /* data */ +#define ATS_TYPE_FLAT_RD 0x4ull /* flat buffer read only */ +#define ATS_TYPE_FLAT_RDWR 0x5ull /* flat buffer read/write */ +#define ATS_TYPE_SGL_RD 0x6ull /* sgl read only */ +#define ATS_TYPE_SGL_RDWR 0x7ull /* sgl read/write */ + +#define ATS_SET_FLAGS(_struct, _field, _flags) \ + (((_flags) & 0xf) << (44 - (4 * (offsetof(_struct, _field) / 8)))) + +#define ATS_GET_FLAGS(_ats, _byte_offs) \ + (((_ats) >> (44 - (4 * ((_byte_offs) / 8)))) & 0xf) + +/** + * struct genwqe_ddcb_cmd - User parameter for generic DDCB commands + * + * On the way into the kernel the driver will read the whole data + * structure. On the way out the driver will not copy the ASIV data + * back to user-space. + */ +struct genwqe_ddcb_cmd { + /* START of data copied to/from driver */ + __u64 next_addr; /* chaining genwqe_ddcb_cmd */ + __u64 flags; /* reserved */ + + __u8 acfunc; /* accelerators functional unit */ + __u8 cmd; /* command to execute */ + __u8 asiv_length; /* used parameter length */ + __u8 asv_length; /* length of valid return values */ + __u16 cmdopts; /* command options */ + __u16 retc; /* return code from processing */ + + __u16 attn; /* attention code from processing */ + __u16 vcrc; /* variant crc16 */ + __u32 progress; /* progress code from processing */ + + __u64 deque_ts; /* dequeue time stamp */ + __u64 cmplt_ts; /* completion time stamp */ + __u64 disp_ts; /* SW processing start */ + + /* move to end and avoid copy-back */ + __u64 ddata_addr; /* collect debug data */ + + /* command specific values */ + __u8 asv[DDCB_ASV_LENGTH]; + + /* END of data copied from driver */ + union { + struct { + __u64 ats; + __u8 asiv[DDCB_ASIV_LENGTH_ATS]; + }; + /* used for flash update to keep it backward compatible */ + __u8 __asiv[DDCB_ASIV_LENGTH]; + }; + /* END of data copied to driver */ +}; + +#define GENWQE_IOC_CODE 0xa5 + +/* Access functions */ +#define GENWQE_READ_REG64 _IOR(GENWQE_IOC_CODE, 30, struct genwqe_reg_io) +#define GENWQE_WRITE_REG64 _IOW(GENWQE_IOC_CODE, 31, struct genwqe_reg_io) +#define GENWQE_READ_REG32 _IOR(GENWQE_IOC_CODE, 32, struct genwqe_reg_io) +#define GENWQE_WRITE_REG32 _IOW(GENWQE_IOC_CODE, 33, struct genwqe_reg_io) +#define GENWQE_READ_REG16 _IOR(GENWQE_IOC_CODE, 34, struct genwqe_reg_io) +#define GENWQE_WRITE_REG16 _IOW(GENWQE_IOC_CODE, 35, struct genwqe_reg_io) + +#define GENWQE_GET_CARD_STATE _IOR(GENWQE_IOC_CODE, 36, enum genwqe_card_state) + +/** + * struct genwqe_mem - Memory pinning/unpinning information + * @addr: virtual user space address + * @size: size of the area pin/dma-map/unmap + * direction: 0: read/1: read and write + * + * Avoid pinning and unpinning of memory pages dynamically. Instead + * the idea is to pin the whole buffer space required for DDCB + * opertionas in advance. The driver will reuse this pinning and the + * memory associated with it to setup the sglists for the DDCB + * requests without the need to allocate and free memory or map and + * unmap to get the DMA addresses. + * + * The inverse operation needs to be called after the pinning is not + * needed anymore. The pinnings else the pinnings will get removed + * after the device is closed. Note that pinnings will required + * memory. + */ +struct genwqe_mem { + __u64 addr; + __u64 size; + __u64 direction; + __u64 flags; +}; + +#define GENWQE_PIN_MEM _IOWR(GENWQE_IOC_CODE, 40, struct genwqe_mem) +#define GENWQE_UNPIN_MEM _IOWR(GENWQE_IOC_CODE, 41, struct genwqe_mem) + +/* + * Generic synchronous DDCB execution interface. + * Synchronously execute a DDCB. + * + * Return: 0 on success or negative error code. + * -EINVAL: Invalid parameters (ASIV_LEN, ASV_LEN, illegal fixups + * no mappings found/could not create mappings + * -EFAULT: illegal addresses in fixups, purging failed + * -EBADMSG: enqueing failed, retc != DDCB_RETC_COMPLETE + */ +#define GENWQE_EXECUTE_DDCB \ + _IOWR(GENWQE_IOC_CODE, 50, struct genwqe_ddcb_cmd) + +#define GENWQE_EXECUTE_RAW_DDCB \ + _IOWR(GENWQE_IOC_CODE, 51, struct genwqe_ddcb_cmd) + +/* Service Layer functions (PF only) */ +#define GENWQE_SLU_UPDATE _IOWR(GENWQE_IOC_CODE, 80, struct genwqe_bitstream) +#define GENWQE_SLU_READ _IOWR(GENWQE_IOC_CODE, 81, struct genwqe_bitstream) + +#endif /* __GENWQE_CARD_H__ */ diff --git a/include/uapi/linux/gfs2_ondisk.h b/include/uapi/linux/gfs2_ondisk.h index b2de1f9a88d..1a763eaae0b 100644 --- a/include/uapi/linux/gfs2_ondisk.h +++ b/include/uapi/linux/gfs2_ondisk.h @@ -20,7 +20,7 @@ #define GFS2_MOUNT_LOCK 0 #define GFS2_LIVE_LOCK 1 -#define GFS2_TRANS_LOCK 2 +#define GFS2_FREEZE_LOCK 2 #define GFS2_RENAME_LOCK 3 #define GFS2_CONTROL_LOCK 4 #define GFS2_MOUNTED_LOCK 5 @@ -304,7 +304,13 @@ struct gfs2_dirent { __be16 de_rec_len; __be16 de_name_len; __be16 de_type; - __u8 __pad[14]; + union { + __u8 __pad[14]; + struct { + __be16 de_rahead; + __u8 pad2[12]; + }; + }; }; /* @@ -319,7 +325,16 @@ struct gfs2_leaf { __be32 lf_dirent_format; /* Format of the dirents */ __be64 lf_next; /* Next leaf, if overflow */ - __u8 lf_reserved[64]; + union { + __u8 lf_reserved[64]; + struct { + __be64 lf_inode; /* Dir inode number */ + __be32 lf_dist; /* Dist from inode on chain */ + __be32 lf_nsec; /* Last ins/del usecs */ + __be64 lf_sec; /* Last ins/del in secs */ + __u8 lf_reserved2[40]; + }; + }; }; /* @@ -338,9 +353,9 @@ struct gfs2_leaf { * metadata header. Each inode, if it has extended attributes, will * have either a single block containing the extended attribute headers * or a single indirect block pointing to blocks containing the - * extended attribure headers. + * extended attribute headers. * - * The maximim size of the data part of an extended attribute is 64k + * The maximum size of the data part of an extended attribute is 64k * so the number of blocks required depends upon block size. Since the * block size also determines the number of pointers in an indirect * block, its a fairly complicated calculation to work out the maximum diff --git a/include/uapi/linux/hash_info.h b/include/uapi/linux/hash_info.h new file mode 100644 index 00000000000..ca18c45f830 --- /dev/null +++ b/include/uapi/linux/hash_info.h @@ -0,0 +1,37 @@ +/* + * Hash Info: Hash algorithms information + * + * Copyright (c) 2013 Dmitry Kasatkin <d.kasatkin@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ + +#ifndef _UAPI_LINUX_HASH_INFO_H +#define _UAPI_LINUX_HASH_INFO_H + +enum hash_algo { + HASH_ALGO_MD4, + HASH_ALGO_MD5, + HASH_ALGO_SHA1, + HASH_ALGO_RIPE_MD_160, + HASH_ALGO_SHA256, + HASH_ALGO_SHA384, + HASH_ALGO_SHA512, + HASH_ALGO_SHA224, + HASH_ALGO_RIPE_MD_128, + HASH_ALGO_RIPE_MD_256, + HASH_ALGO_RIPE_MD_320, + HASH_ALGO_WP_256, + HASH_ALGO_WP_384, + HASH_ALGO_WP_512, + HASH_ALGO_TGR_128, + HASH_ALGO_TGR_160, + HASH_ALGO_TGR_192, + HASH_ALGO__LAST +}; + +#endif /* _UAPI_LINUX_HASH_INFO_H */ diff --git a/include/uapi/linux/hsr_netlink.h b/include/uapi/linux/hsr_netlink.h new file mode 100644 index 00000000000..2475cb8a53a --- /dev/null +++ b/include/uapi/linux/hsr_netlink.h @@ -0,0 +1,50 @@ +/* + * Copyright 2011-2013 Autronica Fire and Security AS + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * Author(s): + * 2011-2013 Arvid Brodin, arvid.brodin@xdin.com + */ + +#ifndef __UAPI_HSR_NETLINK_H +#define __UAPI_HSR_NETLINK_H + +/* Generic Netlink HSR family definition + */ + +/* attributes */ +enum { + HSR_A_UNSPEC, + HSR_A_NODE_ADDR, + HSR_A_IFINDEX, + HSR_A_IF1_AGE, + HSR_A_IF2_AGE, + HSR_A_NODE_ADDR_B, + HSR_A_IF1_SEQ, + HSR_A_IF2_SEQ, + HSR_A_IF1_IFINDEX, + HSR_A_IF2_IFINDEX, + HSR_A_ADDR_B_IFINDEX, + __HSR_A_MAX, +}; +#define HSR_A_MAX (__HSR_A_MAX - 1) + + +/* commands */ +enum { + HSR_C_UNSPEC, + HSR_C_RING_ERROR, + HSR_C_NODE_DOWN, + HSR_C_GET_NODE_STATUS, + HSR_C_SET_NODE_STATUS, + HSR_C_GET_NODE_LIST, + HSR_C_SET_NODE_LIST, + __HSR_C_MAX, +}; +#define HSR_C_MAX (__HSR_C_MAX - 1) + +#endif /* __UAPI_HSR_NETLINK_H */ diff --git a/include/uapi/linux/hyperv.h b/include/uapi/linux/hyperv.h new file mode 100644 index 00000000000..78e4a86030d --- /dev/null +++ b/include/uapi/linux/hyperv.h @@ -0,0 +1,391 @@ +/* + * + * Copyright (c) 2011, Microsoft Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place - Suite 330, Boston, MA 02111-1307 USA. + * + * Authors: + * Haiyang Zhang <haiyangz@microsoft.com> + * Hank Janssen <hjanssen@microsoft.com> + * K. Y. Srinivasan <kys@microsoft.com> + * + */ + +#ifndef _UAPI_HYPERV_H +#define _UAPI_HYPERV_H + +#include <linux/uuid.h> + +/* + * Framework version for util services. + */ +#define UTIL_FW_MINOR 0 + +#define UTIL_WS2K8_FW_MAJOR 1 +#define UTIL_WS2K8_FW_VERSION (UTIL_WS2K8_FW_MAJOR << 16 | UTIL_FW_MINOR) + +#define UTIL_FW_MAJOR 3 +#define UTIL_FW_VERSION (UTIL_FW_MAJOR << 16 | UTIL_FW_MINOR) + + +/* + * Implementation of host controlled snapshot of the guest. + */ + +#define VSS_OP_REGISTER 128 + +enum hv_vss_op { + VSS_OP_CREATE = 0, + VSS_OP_DELETE, + VSS_OP_HOT_BACKUP, + VSS_OP_GET_DM_INFO, + VSS_OP_BU_COMPLETE, + /* + * Following operations are only supported with IC version >= 5.0 + */ + VSS_OP_FREEZE, /* Freeze the file systems in the VM */ + VSS_OP_THAW, /* Unfreeze the file systems */ + VSS_OP_AUTO_RECOVER, + VSS_OP_COUNT /* Number of operations, must be last */ +}; + + +/* + * Header for all VSS messages. + */ +struct hv_vss_hdr { + __u8 operation; + __u8 reserved[7]; +} __attribute__((packed)); + + +/* + * Flag values for the hv_vss_check_feature. Linux supports only + * one value. + */ +#define VSS_HBU_NO_AUTO_RECOVERY 0x00000005 + +struct hv_vss_check_feature { + __u32 flags; +} __attribute__((packed)); + +struct hv_vss_check_dm_info { + __u32 flags; +} __attribute__((packed)); + +struct hv_vss_msg { + union { + struct hv_vss_hdr vss_hdr; + int error; + }; + union { + struct hv_vss_check_feature vss_cf; + struct hv_vss_check_dm_info dm_info; + }; +} __attribute__((packed)); + +/* + * Implementation of a host to guest copy facility. + */ + +#define FCOPY_VERSION_0 0 +#define FCOPY_CURRENT_VERSION FCOPY_VERSION_0 +#define W_MAX_PATH 260 + +enum hv_fcopy_op { + START_FILE_COPY = 0, + WRITE_TO_FILE, + COMPLETE_FCOPY, + CANCEL_FCOPY, +}; + +struct hv_fcopy_hdr { + __u32 operation; + uuid_le service_id0; /* currently unused */ + uuid_le service_id1; /* currently unused */ +} __attribute__((packed)); + +#define OVER_WRITE 0x1 +#define CREATE_PATH 0x2 + +struct hv_start_fcopy { + struct hv_fcopy_hdr hdr; + __u16 file_name[W_MAX_PATH]; + __u16 path_name[W_MAX_PATH]; + __u32 copy_flags; + __u64 file_size; +} __attribute__((packed)); + +/* + * The file is chunked into fragments. + */ +#define DATA_FRAGMENT (6 * 1024) + +struct hv_do_fcopy { + struct hv_fcopy_hdr hdr; + __u64 offset; + __u32 size; + __u8 data[DATA_FRAGMENT]; +}; + +/* + * An implementation of HyperV key value pair (KVP) functionality for Linux. + * + * + * Copyright (C) 2010, Novell, Inc. + * Author : K. Y. Srinivasan <ksrinivasan@novell.com> + * + */ + +/* + * Maximum value size - used for both key names and value data, and includes + * any applicable NULL terminators. + * + * Note: This limit is somewhat arbitrary, but falls easily within what is + * supported for all native guests (back to Win 2000) and what is reasonable + * for the IC KVP exchange functionality. Note that Windows Me/98/95 are + * limited to 255 character key names. + * + * MSDN recommends not storing data values larger than 2048 bytes in the + * registry. + * + * Note: This value is used in defining the KVP exchange message - this value + * cannot be modified without affecting the message size and compatibility. + */ + +/* + * bytes, including any null terminators + */ +#define HV_KVP_EXCHANGE_MAX_VALUE_SIZE (2048) + + +/* + * Maximum key size - the registry limit for the length of an entry name + * is 256 characters, including the null terminator + */ + +#define HV_KVP_EXCHANGE_MAX_KEY_SIZE (512) + +/* + * In Linux, we implement the KVP functionality in two components: + * 1) The kernel component which is packaged as part of the hv_utils driver + * is responsible for communicating with the host and responsible for + * implementing the host/guest protocol. 2) A user level daemon that is + * responsible for data gathering. + * + * Host/Guest Protocol: The host iterates over an index and expects the guest + * to assign a key name to the index and also return the value corresponding to + * the key. The host will have atmost one KVP transaction outstanding at any + * given point in time. The host side iteration stops when the guest returns + * an error. Microsoft has specified the following mapping of key names to + * host specified index: + * + * Index Key Name + * 0 FullyQualifiedDomainName + * 1 IntegrationServicesVersion + * 2 NetworkAddressIPv4 + * 3 NetworkAddressIPv6 + * 4 OSBuildNumber + * 5 OSName + * 6 OSMajorVersion + * 7 OSMinorVersion + * 8 OSVersion + * 9 ProcessorArchitecture + * + * The Windows host expects the Key Name and Key Value to be encoded in utf16. + * + * Guest Kernel/KVP Daemon Protocol: As noted earlier, we implement all of the + * data gathering functionality in a user mode daemon. The user level daemon + * is also responsible for binding the key name to the index as well. The + * kernel and user-level daemon communicate using a connector channel. + * + * The user mode component first registers with the + * the kernel component. Subsequently, the kernel component requests, data + * for the specified keys. In response to this message the user mode component + * fills in the value corresponding to the specified key. We overload the + * sequence field in the cn_msg header to define our KVP message types. + * + * + * The kernel component simply acts as a conduit for communication between the + * Windows host and the user-level daemon. The kernel component passes up the + * index received from the Host to the user-level daemon. If the index is + * valid (supported), the corresponding key as well as its + * value (both are strings) is returned. If the index is invalid + * (not supported), a NULL key string is returned. + */ + + +/* + * Registry value types. + */ + +#define REG_SZ 1 +#define REG_U32 4 +#define REG_U64 8 + +/* + * As we look at expanding the KVP functionality to include + * IP injection functionality, we need to maintain binary + * compatibility with older daemons. + * + * The KVP opcodes are defined by the host and it was unfortunate + * that I chose to treat the registration operation as part of the + * KVP operations defined by the host. + * Here is the level of compatibility + * (between the user level daemon and the kernel KVP driver) that we + * will implement: + * + * An older daemon will always be supported on a newer driver. + * A given user level daemon will require a minimal version of the + * kernel driver. + * If we cannot handle the version differences, we will fail gracefully + * (this can happen when we have a user level daemon that is more + * advanced than the KVP driver. + * + * We will use values used in this handshake for determining if we have + * workable user level daemon and the kernel driver. We begin by taking the + * registration opcode out of the KVP opcode namespace. We will however, + * maintain compatibility with the existing user-level daemon code. + */ + +/* + * Daemon code not supporting IP injection (legacy daemon). + */ + +#define KVP_OP_REGISTER 4 + +/* + * Daemon code supporting IP injection. + * The KVP opcode field is used to communicate the + * registration information; so define a namespace that + * will be distinct from the host defined KVP opcode. + */ + +#define KVP_OP_REGISTER1 100 + +enum hv_kvp_exchg_op { + KVP_OP_GET = 0, + KVP_OP_SET, + KVP_OP_DELETE, + KVP_OP_ENUMERATE, + KVP_OP_GET_IP_INFO, + KVP_OP_SET_IP_INFO, + KVP_OP_COUNT /* Number of operations, must be last. */ +}; + +enum hv_kvp_exchg_pool { + KVP_POOL_EXTERNAL = 0, + KVP_POOL_GUEST, + KVP_POOL_AUTO, + KVP_POOL_AUTO_EXTERNAL, + KVP_POOL_AUTO_INTERNAL, + KVP_POOL_COUNT /* Number of pools, must be last. */ +}; + +/* + * Some Hyper-V status codes. + */ + +#define HV_S_OK 0x00000000 +#define HV_E_FAIL 0x80004005 +#define HV_S_CONT 0x80070103 +#define HV_ERROR_NOT_SUPPORTED 0x80070032 +#define HV_ERROR_MACHINE_LOCKED 0x800704F7 +#define HV_ERROR_DEVICE_NOT_CONNECTED 0x8007048F +#define HV_INVALIDARG 0x80070057 +#define HV_GUID_NOTFOUND 0x80041002 +#define HV_ERROR_ALREADY_EXISTS 0x80070050 + +#define ADDR_FAMILY_NONE 0x00 +#define ADDR_FAMILY_IPV4 0x01 +#define ADDR_FAMILY_IPV6 0x02 + +#define MAX_ADAPTER_ID_SIZE 128 +#define MAX_IP_ADDR_SIZE 1024 +#define MAX_GATEWAY_SIZE 512 + + +struct hv_kvp_ipaddr_value { + __u16 adapter_id[MAX_ADAPTER_ID_SIZE]; + __u8 addr_family; + __u8 dhcp_enabled; + __u16 ip_addr[MAX_IP_ADDR_SIZE]; + __u16 sub_net[MAX_IP_ADDR_SIZE]; + __u16 gate_way[MAX_GATEWAY_SIZE]; + __u16 dns_addr[MAX_IP_ADDR_SIZE]; +} __attribute__((packed)); + + +struct hv_kvp_hdr { + __u8 operation; + __u8 pool; + __u16 pad; +} __attribute__((packed)); + +struct hv_kvp_exchg_msg_value { + __u32 value_type; + __u32 key_size; + __u32 value_size; + __u8 key[HV_KVP_EXCHANGE_MAX_KEY_SIZE]; + union { + __u8 value[HV_KVP_EXCHANGE_MAX_VALUE_SIZE]; + __u32 value_u32; + __u64 value_u64; + }; +} __attribute__((packed)); + +struct hv_kvp_msg_enumerate { + __u32 index; + struct hv_kvp_exchg_msg_value data; +} __attribute__((packed)); + +struct hv_kvp_msg_get { + struct hv_kvp_exchg_msg_value data; +}; + +struct hv_kvp_msg_set { + struct hv_kvp_exchg_msg_value data; +}; + +struct hv_kvp_msg_delete { + __u32 key_size; + __u8 key[HV_KVP_EXCHANGE_MAX_KEY_SIZE]; +}; + +struct hv_kvp_register { + __u8 version[HV_KVP_EXCHANGE_MAX_KEY_SIZE]; +}; + +struct hv_kvp_msg { + union { + struct hv_kvp_hdr kvp_hdr; + int error; + }; + union { + struct hv_kvp_msg_get kvp_get; + struct hv_kvp_msg_set kvp_set; + struct hv_kvp_msg_delete kvp_delete; + struct hv_kvp_msg_enumerate kvp_enum_data; + struct hv_kvp_ipaddr_value kvp_ip_val; + struct hv_kvp_register kvp_register; + } body; +} __attribute__((packed)); + +struct hv_kvp_ip_msg { + __u8 operation; + __u8 pool; + struct hv_kvp_ipaddr_value kvp_ip_val; +} __attribute__((packed)); + +#endif /* _UAPI_HYPERV_H */ diff --git a/include/uapi/linux/icmpv6.h b/include/uapi/linux/icmpv6.h index e0133c73c30..590beda78ea 100644 --- a/include/uapi/linux/icmpv6.h +++ b/include/uapi/linux/icmpv6.h @@ -115,6 +115,8 @@ struct icmp6hdr { #define ICMPV6_NOT_NEIGHBOUR 2 #define ICMPV6_ADDR_UNREACH 3 #define ICMPV6_PORT_UNREACH 4 +#define ICMPV6_POLICY_FAIL 5 +#define ICMPV6_REJECT_ROUTE 6 /* * Codes for Time Exceeded diff --git a/include/uapi/linux/if.h b/include/uapi/linux/if.h index 1ec407b01e4..9cf2394f0bc 100644 --- a/include/uapi/linux/if.h +++ b/include/uapi/linux/if.h @@ -27,64 +27,91 @@ #define IFALIASZ 256 #include <linux/hdlc/ioctl.h> -/* Standard interface flags (netdevice->flags). */ -#define IFF_UP 0x1 /* interface is up */ -#define IFF_BROADCAST 0x2 /* broadcast address valid */ -#define IFF_DEBUG 0x4 /* turn on debugging */ -#define IFF_LOOPBACK 0x8 /* is a loopback net */ -#define IFF_POINTOPOINT 0x10 /* interface is has p-p link */ -#define IFF_NOTRAILERS 0x20 /* avoid use of trailers */ -#define IFF_RUNNING 0x40 /* interface RFC2863 OPER_UP */ -#define IFF_NOARP 0x80 /* no ARP protocol */ -#define IFF_PROMISC 0x100 /* receive all packets */ -#define IFF_ALLMULTI 0x200 /* receive all multicast packets*/ - -#define IFF_MASTER 0x400 /* master of a load balancer */ -#define IFF_SLAVE 0x800 /* slave of a load balancer */ - -#define IFF_MULTICAST 0x1000 /* Supports multicast */ - -#define IFF_PORTSEL 0x2000 /* can set media type */ -#define IFF_AUTOMEDIA 0x4000 /* auto media select active */ -#define IFF_DYNAMIC 0x8000 /* dialup device with changing addresses*/ - -#define IFF_LOWER_UP 0x10000 /* driver signals L1 up */ -#define IFF_DORMANT 0x20000 /* driver signals dormant */ +/** + * enum net_device_flags - &struct net_device flags + * + * These are the &struct net_device flags, they can be set by drivers, the + * kernel and some can be triggered by userspace. Userspace can query and + * set these flags using userspace utilities but there is also a sysfs + * entry available for all dev flags which can be queried and set. These flags + * are shared for all types of net_devices. The sysfs entries are available + * via /sys/class/net/<dev>/flags. Flags which can be toggled through sysfs + * are annotated below, note that only a few flags can be toggled and some + * other flags are always always preserved from the original net_device flags + * even if you try to set them via sysfs. Flags which are always preserved + * are kept under the flag grouping @IFF_VOLATILE. Flags which are volatile + * are annotated below as such. + * + * You should have a pretty good reason to be extending these flags. + * + * @IFF_UP: interface is up. Can be toggled through sysfs. + * @IFF_BROADCAST: broadcast address valid. Volatile. + * @IFF_DEBUG: turn on debugging. Can be toggled through sysfs. + * @IFF_LOOPBACK: is a loopback net. Volatile. + * @IFF_POINTOPOINT: interface is has p-p link. Volatile. + * @IFF_NOTRAILERS: avoid use of trailers. Can be toggled through sysfs. + * Volatile. + * @IFF_RUNNING: interface RFC2863 OPER_UP. Volatile. + * @IFF_NOARP: no ARP protocol. Can be toggled through sysfs. Volatile. + * @IFF_PROMISC: receive all packets. Can be toggled through sysfs. + * @IFF_ALLMULTI: receive all multicast packets. Can be toggled through + * sysfs. + * @IFF_MASTER: master of a load balancer. Volatile. + * @IFF_SLAVE: slave of a load balancer. Volatile. + * @IFF_MULTICAST: Supports multicast. Can be toggled through sysfs. + * @IFF_PORTSEL: can set media type. Can be toggled through sysfs. + * @IFF_AUTOMEDIA: auto media select active. Can be toggled through sysfs. + * @IFF_DYNAMIC: dialup device with changing addresses. Can be toggled + * through sysfs. + * @IFF_LOWER_UP: driver signals L1 up. Volatile. + * @IFF_DORMANT: driver signals dormant. Volatile. + * @IFF_ECHO: echo sent packets. Volatile. + */ +enum net_device_flags { + IFF_UP = 1<<0, /* sysfs */ + IFF_BROADCAST = 1<<1, /* volatile */ + IFF_DEBUG = 1<<2, /* sysfs */ + IFF_LOOPBACK = 1<<3, /* volatile */ + IFF_POINTOPOINT = 1<<4, /* volatile */ + IFF_NOTRAILERS = 1<<5, /* sysfs */ + IFF_RUNNING = 1<<6, /* volatile */ + IFF_NOARP = 1<<7, /* sysfs */ + IFF_PROMISC = 1<<8, /* sysfs */ + IFF_ALLMULTI = 1<<9, /* sysfs */ + IFF_MASTER = 1<<10, /* volatile */ + IFF_SLAVE = 1<<11, /* volatile */ + IFF_MULTICAST = 1<<12, /* sysfs */ + IFF_PORTSEL = 1<<13, /* sysfs */ + IFF_AUTOMEDIA = 1<<14, /* sysfs */ + IFF_DYNAMIC = 1<<15, /* sysfs */ + IFF_LOWER_UP = 1<<16, /* volatile */ + IFF_DORMANT = 1<<17, /* volatile */ + IFF_ECHO = 1<<18, /* volatile */ +}; -#define IFF_ECHO 0x40000 /* echo sent packets */ +#define IFF_UP IFF_UP +#define IFF_BROADCAST IFF_BROADCAST +#define IFF_DEBUG IFF_DEBUG +#define IFF_LOOPBACK IFF_LOOPBACK +#define IFF_POINTOPOINT IFF_POINTOPOINT +#define IFF_NOTRAILERS IFF_NOTRAILERS +#define IFF_RUNNING IFF_RUNNING +#define IFF_NOARP IFF_NOARP +#define IFF_PROMISC IFF_PROMISC +#define IFF_ALLMULTI IFF_ALLMULTI +#define IFF_MASTER IFF_MASTER +#define IFF_SLAVE IFF_SLAVE +#define IFF_MULTICAST IFF_MULTICAST +#define IFF_PORTSEL IFF_PORTSEL +#define IFF_AUTOMEDIA IFF_AUTOMEDIA +#define IFF_DYNAMIC IFF_DYNAMIC +#define IFF_LOWER_UP IFF_LOWER_UP +#define IFF_DORMANT IFF_DORMANT +#define IFF_ECHO IFF_ECHO #define IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\ IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT) -/* Private (from user) interface flags (netdevice->priv_flags). */ -#define IFF_802_1Q_VLAN 0x1 /* 802.1Q VLAN device. */ -#define IFF_EBRIDGE 0x2 /* Ethernet bridging device. */ -#define IFF_SLAVE_INACTIVE 0x4 /* bonding slave not the curr. active */ -#define IFF_MASTER_8023AD 0x8 /* bonding master, 802.3ad. */ -#define IFF_MASTER_ALB 0x10 /* bonding master, balance-alb. */ -#define IFF_BONDING 0x20 /* bonding master or slave */ -#define IFF_SLAVE_NEEDARP 0x40 /* need ARPs for validation */ -#define IFF_ISATAP 0x80 /* ISATAP interface (RFC4214) */ -#define IFF_MASTER_ARPMON 0x100 /* bonding master, ARP mon in use */ -#define IFF_WAN_HDLC 0x200 /* WAN HDLC device */ -#define IFF_XMIT_DST_RELEASE 0x400 /* dev_hard_start_xmit() is allowed to - * release skb->dst - */ -#define IFF_DONT_BRIDGE 0x800 /* disallow bridging this ether dev */ -#define IFF_DISABLE_NETPOLL 0x1000 /* disable netpoll at run-time */ -#define IFF_MACVLAN_PORT 0x2000 /* device used as macvlan port */ -#define IFF_BRIDGE_PORT 0x4000 /* device used as bridge port */ -#define IFF_OVS_DATAPATH 0x8000 /* device used as Open vSwitch - * datapath port */ -#define IFF_TX_SKB_SHARING 0x10000 /* The interface supports sharing - * skbs on transmit */ -#define IFF_UNICAST_FLT 0x20000 /* Supports unicast filtering */ -#define IFF_TEAM_PORT 0x40000 /* device used as team port */ -#define IFF_SUPP_NOFCS 0x80000 /* device supports sending custom FCS */ -#define IFF_LIVE_ADDR_CHANGE 0x100000 /* device supports hardware address - * change when it's running */ - - #define IF_GET_IFACE 0x0001 /* for querying only */ #define IF_GET_PROTO 0x0002 diff --git a/include/uapi/linux/if_addr.h b/include/uapi/linux/if_addr.h index 23357ab81a7..dea10a87dfd 100644 --- a/include/uapi/linux/if_addr.h +++ b/include/uapi/linux/if_addr.h @@ -18,6 +18,9 @@ struct ifaddrmsg { * It makes no difference for normally configured broadcast interfaces, * but for point-to-point IFA_ADDRESS is DESTINATION address, * local address is supplied in IFA_LOCAL attribute. + * + * IFA_FLAGS is a u32 attribute that extends the u8 field ifa_flags. + * If present, the value from struct ifaddrmsg will be ignored. */ enum { IFA_UNSPEC, @@ -28,6 +31,7 @@ enum { IFA_ANYCAST, IFA_CACHEINFO, IFA_MULTICAST, + IFA_FLAGS, __IFA_MAX, }; @@ -44,6 +48,8 @@ enum { #define IFA_F_DEPRECATED 0x20 #define IFA_F_TENTATIVE 0x40 #define IFA_F_PERMANENT 0x80 +#define IFA_F_MANAGETEMPADDR 0x100 +#define IFA_F_NOPREFIXROUTE 0x200 struct ifa_cacheinfo { __u32 ifa_prefered; diff --git a/include/uapi/linux/if_arp.h b/include/uapi/linux/if_arp.h index 82c7d1bdade..4d024d75d64 100644 --- a/include/uapi/linux/if_arp.h +++ b/include/uapi/linux/if_arp.h @@ -93,6 +93,8 @@ #define ARPHRD_PHONET_PIPE 821 /* PhoNet pipe header */ #define ARPHRD_CAIF 822 /* CAIF media type */ #define ARPHRD_IP6GRE 823 /* GRE over IPv6 */ +#define ARPHRD_NETLINK 824 /* Netlink header */ +#define ARPHRD_6LOWPAN 825 /* IPv6 over LoWPAN */ #define ARPHRD_VOID 0xFFFF /* Void type, nothing is known */ #define ARPHRD_NONE 0xFFFE /* zero header length */ diff --git a/include/uapi/linux/if_bonding.h b/include/uapi/linux/if_bonding.h index a17edda8a78..9635a62f6f8 100644 --- a/include/uapi/linux/if_bonding.h +++ b/include/uapi/linux/if_bonding.h @@ -91,6 +91,8 @@ #define BOND_XMIT_POLICY_LAYER2 0 /* layer 2 (MAC only), default */ #define BOND_XMIT_POLICY_LAYER34 1 /* layer 3+4 (IP ^ (TCP || UDP)) */ #define BOND_XMIT_POLICY_LAYER23 2 /* layer 2+3 (IP ^ MAC) */ +#define BOND_XMIT_POLICY_ENCAP23 3 /* encapsulated layer 2+3 */ +#define BOND_XMIT_POLICY_ENCAP34 4 /* encapsulated layer 3+4 */ typedef struct ifbond { __s32 bond_mode; diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h index 5db297514ae..39f621a9fe8 100644 --- a/include/uapi/linux/if_bridge.h +++ b/include/uapi/linux/if_bridge.h @@ -14,6 +14,7 @@ #define _UAPI_LINUX_IF_BRIDGE_H #include <linux/types.h> +#include <linux/if_ether.h> #define SYSFS_BRIDGE_ATTR "bridge" #define SYSFS_BRIDGE_FDB "brforward" @@ -88,7 +89,7 @@ struct __port_info { }; struct __fdb_entry { - __u8 mac_addr[6]; + __u8 mac_addr[ETH_ALEN]; __u8 port_no; __u8 is_local; __u32 ageing_timer_value; @@ -108,15 +109,26 @@ struct __fdb_entry { * [IFLA_AF_SPEC] = { * [IFLA_BRIDGE_FLAGS] * [IFLA_BRIDGE_MODE] + * [IFLA_BRIDGE_VLAN_INFO] * } */ enum { IFLA_BRIDGE_FLAGS, IFLA_BRIDGE_MODE, + IFLA_BRIDGE_VLAN_INFO, __IFLA_BRIDGE_MAX, }; #define IFLA_BRIDGE_MAX (__IFLA_BRIDGE_MAX - 1) +#define BRIDGE_VLAN_INFO_MASTER (1<<0) /* Operate on Bridge device as well */ +#define BRIDGE_VLAN_INFO_PVID (1<<1) /* VLAN is PVID, ingress untagged */ +#define BRIDGE_VLAN_INFO_UNTAGGED (1<<2) /* VLAN egresses untagged */ + +struct bridge_vlan_info { + __u16 flags; + __u16 vid; +}; + /* Bridge multicast database attributes * [MDBA_MDB] = { * [MDBA_MDB_ENTRY] = { diff --git a/include/uapi/linux/if_cablemodem.h b/include/uapi/linux/if_cablemodem.h index 9ca1007edd9..ee6b3c442ba 100644 --- a/include/uapi/linux/if_cablemodem.h +++ b/include/uapi/linux/if_cablemodem.h @@ -12,11 +12,11 @@ */ /* some useful defines for sb1000.c e cmconfig.c - fv */ -#define SIOCGCMSTATS SIOCDEVPRIVATE+0 /* get cable modem stats */ -#define SIOCGCMFIRMWARE SIOCDEVPRIVATE+1 /* get cm firmware version */ -#define SIOCGCMFREQUENCY SIOCDEVPRIVATE+2 /* get cable modem frequency */ -#define SIOCSCMFREQUENCY SIOCDEVPRIVATE+3 /* set cable modem frequency */ -#define SIOCGCMPIDS SIOCDEVPRIVATE+4 /* get cable modem PIDs */ -#define SIOCSCMPIDS SIOCDEVPRIVATE+5 /* set cable modem PIDs */ +#define SIOCGCMSTATS (SIOCDEVPRIVATE+0) /* get cable modem stats */ +#define SIOCGCMFIRMWARE (SIOCDEVPRIVATE+1) /* get cm firmware version */ +#define SIOCGCMFREQUENCY (SIOCDEVPRIVATE+2) /* get cable modem frequency */ +#define SIOCSCMFREQUENCY (SIOCDEVPRIVATE+3) /* set cable modem frequency */ +#define SIOCGCMPIDS (SIOCDEVPRIVATE+4) /* get cable modem PIDs */ +#define SIOCSCMPIDS (SIOCDEVPRIVATE+5) /* set cable modem PIDs */ #endif diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h index 67fb87ca109..0f8210b8e0b 100644 --- a/include/uapi/linux/if_ether.h +++ b/include/uapi/linux/if_ether.h @@ -68,11 +68,11 @@ #define ETH_P_SLOW 0x8809 /* Slow Protocol. See 802.3ad 43B */ #define ETH_P_WCCP 0x883E /* Web-cache coordination protocol * defined in draft-wilson-wrec-wccp-v2-00.txt */ -#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */ -#define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */ #define ETH_P_MPLS_UC 0x8847 /* MPLS Unicast traffic */ #define ETH_P_MPLS_MC 0x8848 /* MPLS Multicast traffic */ #define ETH_P_ATMMPOA 0x884c /* MultiProtocol Over ATM */ +#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */ +#define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */ #define ETH_P_LINK_CTL 0x886c /* HPNA, wlan link local tunnel */ #define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport * over Ethernet @@ -83,16 +83,23 @@ #define ETH_P_802_EX1 0x88B5 /* 802.1 Local Experimental 1. */ #define ETH_P_TIPC 0x88CA /* TIPC */ #define ETH_P_8021AH 0x88E7 /* 802.1ah Backbone Service Tag */ +#define ETH_P_MVRP 0x88F5 /* 802.1Q MVRP */ #define ETH_P_1588 0x88F7 /* IEEE 1588 Timesync */ +#define ETH_P_PRP 0x88FB /* IEC 62439-3 PRP/HSRv0 */ #define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */ #define ETH_P_TDLS 0x890D /* TDLS */ #define ETH_P_FIP 0x8914 /* FCoE Initialization Protocol */ +#define ETH_P_80221 0x8917 /* IEEE 802.21 Media Independent Handover Protocol */ +#define ETH_P_LOOPBACK 0x9000 /* Ethernet loopback packet, per IEEE 802.3 */ #define ETH_P_QINQ1 0x9100 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_QINQ2 0x9200 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_QINQ3 0x9300 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_802_3_MIN 0x0600 /* If the value in the ethernet type is less than this value + * then the frame is Ethernet II. Else it is 802.3 */ + /* * Non DIX types. Won't clash for 1500 types. */ diff --git a/include/uapi/linux/if_fddi.h b/include/uapi/linux/if_fddi.h index 0d36909c3ae..1086cd9f675 100644 --- a/include/uapi/linux/if_fddi.h +++ b/include/uapi/linux/if_fddi.h @@ -30,74 +30,76 @@ * Define max and min legal sizes. The frame sizes do not include * 4 byte FCS/CRC (frame check sequence). */ -#define FDDI_K_ALEN 6 /* Octets in one FDDI address */ -#define FDDI_K_8022_HLEN 16 /* Total octets in 802.2 header */ -#define FDDI_K_SNAP_HLEN 21 /* Total octets in 802.2 SNAP header */ -#define FDDI_K_8022_ZLEN 16 /* Min octets in 802.2 frame sans FCS */ -#define FDDI_K_SNAP_ZLEN 21 /* Min octets in 802.2 SNAP frame sans FCS */ +#define FDDI_K_ALEN 6 /* Octets in one FDDI address */ +#define FDDI_K_8022_HLEN 16 /* Total octets in 802.2 header */ +#define FDDI_K_SNAP_HLEN 21 /* Total octets in 802.2 SNAP header */ +#define FDDI_K_8022_ZLEN 16 /* Min octets in 802.2 frame sans + FCS */ +#define FDDI_K_SNAP_ZLEN 21 /* Min octets in 802.2 SNAP frame sans + FCS */ #define FDDI_K_8022_DLEN 4475 /* Max octets in 802.2 payload */ #define FDDI_K_SNAP_DLEN 4470 /* Max octets in 802.2 SNAP payload */ -#define FDDI_K_LLC_ZLEN 13 /* Min octets in LLC frame sans FCS */ +#define FDDI_K_LLC_ZLEN 13 /* Min octets in LLC frame sans FCS */ #define FDDI_K_LLC_LEN 4491 /* Max octets in LLC frame sans FCS */ +#define FDDI_K_OUI_LEN 3 /* Octets in OUI in 802.2 SNAP + header */ /* Define FDDI Frame Control (FC) Byte values */ -#define FDDI_FC_K_VOID 0x00 -#define FDDI_FC_K_NON_RESTRICTED_TOKEN 0x80 -#define FDDI_FC_K_RESTRICTED_TOKEN 0xC0 -#define FDDI_FC_K_SMT_MIN 0x41 -#define FDDI_FC_K_SMT_MAX 0x4F -#define FDDI_FC_K_MAC_MIN 0xC1 -#define FDDI_FC_K_MAC_MAX 0xCF -#define FDDI_FC_K_ASYNC_LLC_MIN 0x50 -#define FDDI_FC_K_ASYNC_LLC_DEF 0x54 -#define FDDI_FC_K_ASYNC_LLC_MAX 0x5F -#define FDDI_FC_K_SYNC_LLC_MIN 0xD0 -#define FDDI_FC_K_SYNC_LLC_MAX 0xD7 -#define FDDI_FC_K_IMPLEMENTOR_MIN 0x60 -#define FDDI_FC_K_IMPLEMENTOR_MAX 0x6F -#define FDDI_FC_K_RESERVED_MIN 0x70 -#define FDDI_FC_K_RESERVED_MAX 0x7F +#define FDDI_FC_K_VOID 0x00 +#define FDDI_FC_K_NON_RESTRICTED_TOKEN 0x80 +#define FDDI_FC_K_RESTRICTED_TOKEN 0xC0 +#define FDDI_FC_K_SMT_MIN 0x41 +#define FDDI_FC_K_SMT_MAX 0x4F +#define FDDI_FC_K_MAC_MIN 0xC1 +#define FDDI_FC_K_MAC_MAX 0xCF +#define FDDI_FC_K_ASYNC_LLC_MIN 0x50 +#define FDDI_FC_K_ASYNC_LLC_DEF 0x54 +#define FDDI_FC_K_ASYNC_LLC_MAX 0x5F +#define FDDI_FC_K_SYNC_LLC_MIN 0xD0 +#define FDDI_FC_K_SYNC_LLC_MAX 0xD7 +#define FDDI_FC_K_IMPLEMENTOR_MIN 0x60 +#define FDDI_FC_K_IMPLEMENTOR_MAX 0x6F +#define FDDI_FC_K_RESERVED_MIN 0x70 +#define FDDI_FC_K_RESERVED_MAX 0x7F /* Define LLC and SNAP constants */ -#define FDDI_EXTENDED_SAP 0xAA +#define FDDI_EXTENDED_SAP 0xAA #define FDDI_UI_CMD 0x03 /* Define 802.2 Type 1 header */ struct fddi_8022_1_hdr { - __u8 dsap; /* destination service access point */ - __u8 ssap; /* source service access point */ - __u8 ctrl; /* control byte #1 */ + __u8 dsap; /* destination service access point */ + __u8 ssap; /* source service access point */ + __u8 ctrl; /* control byte #1 */ } __attribute__((packed)); /* Define 802.2 Type 2 header */ struct fddi_8022_2_hdr { - __u8 dsap; /* destination service access point */ - __u8 ssap; /* source service access point */ - __u8 ctrl_1; /* control byte #1 */ - __u8 ctrl_2; /* control byte #2 */ + __u8 dsap; /* destination service access point */ + __u8 ssap; /* source service access point */ + __u8 ctrl_1; /* control byte #1 */ + __u8 ctrl_2; /* control byte #2 */ } __attribute__((packed)); /* Define 802.2 SNAP header */ -#define FDDI_K_OUI_LEN 3 struct fddi_snap_hdr { - __u8 dsap; /* always 0xAA */ - __u8 ssap; /* always 0xAA */ - __u8 ctrl; /* always 0x03 */ + __u8 dsap; /* always 0xAA */ + __u8 ssap; /* always 0xAA */ + __u8 ctrl; /* always 0x03 */ __u8 oui[FDDI_K_OUI_LEN]; /* organizational universal id */ - __be16 ethertype; /* packet type ID field */ + __be16 ethertype; /* packet type ID field */ } __attribute__((packed)); /* Define FDDI LLC frame header */ struct fddihdr { - __u8 fc; /* frame control */ - __u8 daddr[FDDI_K_ALEN]; /* destination address */ - __u8 saddr[FDDI_K_ALEN]; /* source address */ - union - { - struct fddi_8022_1_hdr llc_8022_1; - struct fddi_8022_2_hdr llc_8022_2; - struct fddi_snap_hdr llc_snap; - } hdr; + __u8 fc; /* frame control */ + __u8 daddr[FDDI_K_ALEN]; /* destination address */ + __u8 saddr[FDDI_K_ALEN]; /* source address */ + union { + struct fddi_8022_1_hdr llc_8022_1; + struct fddi_8022_2_hdr llc_8022_2; + struct fddi_snap_hdr llc_snap; + } hdr; } __attribute__((packed)); diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index 60f3b6b9060..b38534895db 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -142,6 +142,9 @@ enum { #define IFLA_PROMISCUITY IFLA_PROMISCUITY IFLA_NUM_TX_QUEUES, IFLA_NUM_RX_QUEUES, + IFLA_CARRIER, + IFLA_PHYS_PORT_ID, + IFLA_CARRIER_CHANGES, __IFLA_MAX }; @@ -200,6 +203,7 @@ enum { IFLA_INET6_MCAST, /* MC things. What of them? */ IFLA_INET6_CACHEINFO, /* time values and max reasm size */ IFLA_INET6_ICMP6STATS, /* statistics (icmpv6) */ + IFLA_INET6_TOKEN, /* device token */ __IFLA_INET6_MAX }; @@ -219,6 +223,8 @@ enum { IFLA_BRPORT_GUARD, /* bpdu guard */ IFLA_BRPORT_PROTECT, /* root port protection */ IFLA_BRPORT_FAST_LEAVE, /* multicast fast leave */ + IFLA_BRPORT_LEARNING, /* mac learning */ + IFLA_BRPORT_UNICAST_FLOOD, /* flood unicast traffic */ __IFLA_BRPORT_MAX }; #define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1) @@ -235,6 +241,8 @@ enum { IFLA_INFO_KIND, IFLA_INFO_DATA, IFLA_INFO_XSTATS, + IFLA_INFO_SLAVE_KIND, + IFLA_INFO_SLAVE_DATA, __IFLA_INFO_MAX, }; @@ -248,6 +256,7 @@ enum { IFLA_VLAN_FLAGS, IFLA_VLAN_EGRESS_QOS, IFLA_VLAN_INGRESS_QOS, + IFLA_VLAN_PROTOCOL, __IFLA_VLAN_MAX, }; @@ -294,7 +303,7 @@ enum macvlan_mode { enum { IFLA_VXLAN_UNSPEC, IFLA_VXLAN_ID, - IFLA_VXLAN_GROUP, + IFLA_VXLAN_GROUP, /* group or remote address */ IFLA_VXLAN_LINK, IFLA_VXLAN_LOCAL, IFLA_VXLAN_TTL, @@ -302,11 +311,17 @@ enum { IFLA_VXLAN_LEARNING, IFLA_VXLAN_AGEING, IFLA_VXLAN_LIMIT, - IFLA_VXLAN_PORT_RANGE, + IFLA_VXLAN_PORT_RANGE, /* source port */ IFLA_VXLAN_PROXY, IFLA_VXLAN_RSC, IFLA_VXLAN_L2MISS, IFLA_VXLAN_L3MISS, + IFLA_VXLAN_PORT, /* destination port */ + IFLA_VXLAN_GROUP6, + IFLA_VXLAN_LOCAL6, + IFLA_VXLAN_UDP_CSUM, + IFLA_VXLAN_UDP_ZERO_CSUM6_TX, + IFLA_VXLAN_UDP_ZERO_CSUM6_RX, __IFLA_VXLAN_MAX }; #define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1) @@ -316,6 +331,63 @@ struct ifla_vxlan_port_range { __be16 high; }; +/* Bonding section */ + +enum { + IFLA_BOND_UNSPEC, + IFLA_BOND_MODE, + IFLA_BOND_ACTIVE_SLAVE, + IFLA_BOND_MIIMON, + IFLA_BOND_UPDELAY, + IFLA_BOND_DOWNDELAY, + IFLA_BOND_USE_CARRIER, + IFLA_BOND_ARP_INTERVAL, + IFLA_BOND_ARP_IP_TARGET, + IFLA_BOND_ARP_VALIDATE, + IFLA_BOND_ARP_ALL_TARGETS, + IFLA_BOND_PRIMARY, + IFLA_BOND_PRIMARY_RESELECT, + IFLA_BOND_FAIL_OVER_MAC, + IFLA_BOND_XMIT_HASH_POLICY, + IFLA_BOND_RESEND_IGMP, + IFLA_BOND_NUM_PEER_NOTIF, + IFLA_BOND_ALL_SLAVES_ACTIVE, + IFLA_BOND_MIN_LINKS, + IFLA_BOND_LP_INTERVAL, + IFLA_BOND_PACKETS_PER_SLAVE, + IFLA_BOND_AD_LACP_RATE, + IFLA_BOND_AD_SELECT, + IFLA_BOND_AD_INFO, + __IFLA_BOND_MAX, +}; + +#define IFLA_BOND_MAX (__IFLA_BOND_MAX - 1) + +enum { + IFLA_BOND_AD_INFO_UNSPEC, + IFLA_BOND_AD_INFO_AGGREGATOR, + IFLA_BOND_AD_INFO_NUM_PORTS, + IFLA_BOND_AD_INFO_ACTOR_KEY, + IFLA_BOND_AD_INFO_PARTNER_KEY, + IFLA_BOND_AD_INFO_PARTNER_MAC, + __IFLA_BOND_AD_INFO_MAX, +}; + +#define IFLA_BOND_AD_INFO_MAX (__IFLA_BOND_AD_INFO_MAX - 1) + +enum { + IFLA_BOND_SLAVE_UNSPEC, + IFLA_BOND_SLAVE_STATE, + IFLA_BOND_SLAVE_MII_STATUS, + IFLA_BOND_SLAVE_LINK_FAILURE_COUNT, + IFLA_BOND_SLAVE_PERM_HWADDR, + IFLA_BOND_SLAVE_QUEUE_ID, + IFLA_BOND_SLAVE_AD_AGGREGATOR_ID, + __IFLA_BOND_SLAVE_MAX, +}; + +#define IFLA_BOND_SLAVE_MAX (__IFLA_BOND_SLAVE_MAX - 1) + /* SR-IOV virtual function management section */ enum { @@ -330,8 +402,10 @@ enum { IFLA_VF_UNSPEC, IFLA_VF_MAC, /* Hardware queue specific attributes */ IFLA_VF_VLAN, - IFLA_VF_TX_RATE, /* TX Bandwidth Allocation */ + IFLA_VF_TX_RATE, /* Max TX Bandwidth Allocation */ IFLA_VF_SPOOFCHK, /* Spoof Checking on/off switch */ + IFLA_VF_LINK_STATE, /* link state enable/disable/auto switch */ + IFLA_VF_RATE, /* Min and Max TX Bandwidth Allocation */ __IFLA_VF_MAX, }; @@ -353,11 +427,29 @@ struct ifla_vf_tx_rate { __u32 rate; /* Max TX bandwidth in Mbps, 0 disables throttling */ }; +struct ifla_vf_rate { + __u32 vf; + __u32 min_tx_rate; /* Min Bandwidth in Mbps */ + __u32 max_tx_rate; /* Max Bandwidth in Mbps */ +}; + struct ifla_vf_spoofchk { __u32 vf; __u32 setting; }; +enum { + IFLA_VF_LINK_STATE_AUTO, /* link state of the uplink */ + IFLA_VF_LINK_STATE_ENABLE, /* link always up */ + IFLA_VF_LINK_STATE_DISABLE, /* link always down */ + __IFLA_VF_LINK_STATE_MAX, +}; + +struct ifla_vf_link_state { + __u32 vf; + __u32 link_state; +}; + /* VF ports management section * * Nested layout of set/get msg is: @@ -448,4 +540,19 @@ enum { #define IFLA_IPOIB_MAX (__IFLA_IPOIB_MAX - 1) + +/* HSR section */ + +enum { + IFLA_HSR_UNSPEC, + IFLA_HSR_SLAVE1, + IFLA_HSR_SLAVE2, + IFLA_HSR_MULTICAST_SPEC, /* Last byte of supervision addr */ + IFLA_HSR_SUPERVISION_ADDR, /* Supervision frame multicast addr */ + IFLA_HSR_SEQ_NR, + __IFLA_HSR_MAX, +}; + +#define IFLA_HSR_MAX (__IFLA_HSR_MAX - 1) + #endif /* _UAPI_LINUX_IF_LINK_H */ diff --git a/include/uapi/linux/if_packet.h b/include/uapi/linux/if_packet.h index f9a60375f0d..bac27fa05f5 100644 --- a/include/uapi/linux/if_packet.h +++ b/include/uapi/linux/if_packet.h @@ -26,8 +26,10 @@ struct sockaddr_ll { #define PACKET_MULTICAST 2 /* To group */ #define PACKET_OTHERHOST 3 /* To someone else */ #define PACKET_OUTGOING 4 /* Outgoing of any type */ -/* These ones are invisible by user level */ #define PACKET_LOOPBACK 5 /* MC/BRD frame looped back */ +#define PACKET_USER 6 /* To user space */ +#define PACKET_KERNEL 7 /* To kernel space */ +/* Unused, PACKET_FASTROUTE and PACKET_LOOPBACK are invisible to user space */ #define PACKET_FASTROUTE 6 /* Fastrouted frame */ /* Packet socket options */ @@ -51,10 +53,15 @@ struct sockaddr_ll { #define PACKET_TIMESTAMP 17 #define PACKET_FANOUT 18 #define PACKET_TX_HAS_OFF 19 +#define PACKET_QDISC_BYPASS 20 #define PACKET_FANOUT_HASH 0 #define PACKET_FANOUT_LB 1 #define PACKET_FANOUT_CPU 2 +#define PACKET_FANOUT_ROLLOVER 3 +#define PACKET_FANOUT_RND 4 +#define PACKET_FANOUT_QM 5 +#define PACKET_FANOUT_FLAG_ROLLOVER 0x1000 #define PACKET_FANOUT_FLAG_DEFRAG 0x8000 struct tpacket_stats { @@ -80,23 +87,29 @@ struct tpacket_auxdata { __u16 tp_mac; __u16 tp_net; __u16 tp_vlan_tci; - __u16 tp_padding; + __u16 tp_vlan_tpid; }; /* Rx ring - header status */ -#define TP_STATUS_KERNEL 0x0 -#define TP_STATUS_USER 0x1 -#define TP_STATUS_COPY 0x2 -#define TP_STATUS_LOSING 0x4 -#define TP_STATUS_CSUMNOTREADY 0x8 -#define TP_STATUS_VLAN_VALID 0x10 /* auxdata has valid tp_vlan_tci */ -#define TP_STATUS_BLK_TMO 0x20 +#define TP_STATUS_KERNEL 0 +#define TP_STATUS_USER (1 << 0) +#define TP_STATUS_COPY (1 << 1) +#define TP_STATUS_LOSING (1 << 2) +#define TP_STATUS_CSUMNOTREADY (1 << 3) +#define TP_STATUS_VLAN_VALID (1 << 4) /* auxdata has valid tp_vlan_tci */ +#define TP_STATUS_BLK_TMO (1 << 5) +#define TP_STATUS_VLAN_TPID_VALID (1 << 6) /* auxdata has valid tp_vlan_tpid */ /* Tx ring - header status */ -#define TP_STATUS_AVAILABLE 0x0 -#define TP_STATUS_SEND_REQUEST 0x1 -#define TP_STATUS_SENDING 0x2 -#define TP_STATUS_WRONG_FORMAT 0x4 +#define TP_STATUS_AVAILABLE 0 +#define TP_STATUS_SEND_REQUEST (1 << 0) +#define TP_STATUS_SENDING (1 << 1) +#define TP_STATUS_WRONG_FORMAT (1 << 2) + +/* Rx and Tx ring - header status */ +#define TP_STATUS_TS_SOFTWARE (1 << 29) +#define TP_STATUS_TS_SYS_HARDWARE (1 << 30) +#define TP_STATUS_TS_RAW_HARDWARE (1 << 31) /* Rx ring - feature request bits */ #define TP_FT_REQ_FILL_RXHASH 0x1 @@ -124,12 +137,15 @@ struct tpacket2_hdr { __u32 tp_sec; __u32 tp_nsec; __u16 tp_vlan_tci; - __u16 tp_padding; + __u16 tp_vlan_tpid; + __u8 tp_padding[4]; }; struct tpacket_hdr_variant1 { __u32 tp_rxhash; __u32 tp_vlan_tci; + __u16 tp_vlan_tpid; + __u16 tp_padding; }; struct tpacket3_hdr { @@ -145,6 +161,7 @@ struct tpacket3_hdr { union { struct tpacket_hdr_variant1 hv1; }; + __u8 tp_padding[8]; }; struct tpacket_bd_ts { diff --git a/include/uapi/linux/if_pppox.h b/include/uapi/linux/if_pppox.h index 0b46fd57c8f..e128769331b 100644 --- a/include/uapi/linux/if_pppox.h +++ b/include/uapi/linux/if_pppox.h @@ -46,7 +46,7 @@ struct pppoe_addr { * PPTP addressing definition */ struct pptp_addr { - __be16 call_id; + __u16 call_id; struct in_addr sin_addr; }; @@ -135,11 +135,11 @@ struct pppoe_tag { struct pppoe_hdr { #if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 ver : 4; __u8 type : 4; + __u8 ver : 4; #elif defined(__BIG_ENDIAN_BITFIELD) - __u8 type : 4; __u8 ver : 4; + __u8 type : 4; #else #error "Please fix <asm/byteorder.h>" #endif diff --git a/include/uapi/linux/if_tun.h b/include/uapi/linux/if_tun.h index 2835b85fd46..e9502dd1ee2 100644 --- a/include/uapi/linux/if_tun.h +++ b/include/uapi/linux/if_tun.h @@ -56,6 +56,8 @@ #define TUNGETVNETHDRSZ _IOR('T', 215, int) #define TUNSETVNETHDRSZ _IOW('T', 216, int) #define TUNSETQUEUE _IOW('T', 217, int) +#define TUNSETIFINDEX _IOW('T', 218, unsigned int) +#define TUNGETFILTER _IOR('T', 219, struct sock_fprog) /* TUNSETIFF ifr flags */ #define IFF_TUN 0x0001 @@ -68,6 +70,12 @@ #define IFF_MULTI_QUEUE 0x0100 #define IFF_ATTACH_QUEUE 0x0200 #define IFF_DETACH_QUEUE 0x0400 +/* read-only flag */ +#define IFF_PERSIST 0x0800 +#define IFF_NOFILTER 0x1000 + +/* Socket options */ +#define TUN_TX_TIMESTAMP 1 /* Features for GSO (TUNSETOFFLOAD). */ #define TUN_F_CSUM 0x01 /* You can hand me unchecksummed packets. */ diff --git a/include/uapi/linux/if_tunnel.h b/include/uapi/linux/if_tunnel.h index aee73d0611f..3bce9e9d9f7 100644 --- a/include/uapi/linux/if_tunnel.h +++ b/include/uapi/linux/if_tunnel.h @@ -100,7 +100,7 @@ enum { #define IFLA_GRE_MAX (__IFLA_GRE_MAX - 1) /* VTI-mode i_flags */ -#define VTI_ISVTI 0x0001 +#define VTI_ISVTI ((__force __be16)0x0001) enum { IFLA_VTI_UNSPEC, diff --git a/include/uapi/linux/if_vlan.h b/include/uapi/linux/if_vlan.h index 0744f8e65d1..7e5e6b39733 100644 --- a/include/uapi/linux/if_vlan.h +++ b/include/uapi/linux/if_vlan.h @@ -34,6 +34,7 @@ enum vlan_flags { VLAN_FLAG_REORDER_HDR = 0x1, VLAN_FLAG_GVRP = 0x2, VLAN_FLAG_LOOSE_BINDING = 0x4, + VLAN_FLAG_MVRP = 0x8, }; enum vlan_name_types { diff --git a/include/uapi/linux/in.h b/include/uapi/linux/in.h index 9edb441df82..c33a65e3d62 100644 --- a/include/uapi/linux/in.h +++ b/include/uapi/linux/in.h @@ -24,30 +24,53 @@ /* Standard well-defined IP protocols. */ enum { IPPROTO_IP = 0, /* Dummy protocol for TCP */ +#define IPPROTO_IP IPPROTO_IP IPPROTO_ICMP = 1, /* Internet Control Message Protocol */ +#define IPPROTO_ICMP IPPROTO_ICMP IPPROTO_IGMP = 2, /* Internet Group Management Protocol */ +#define IPPROTO_IGMP IPPROTO_IGMP IPPROTO_IPIP = 4, /* IPIP tunnels (older KA9Q tunnels use 94) */ +#define IPPROTO_IPIP IPPROTO_IPIP IPPROTO_TCP = 6, /* Transmission Control Protocol */ +#define IPPROTO_TCP IPPROTO_TCP IPPROTO_EGP = 8, /* Exterior Gateway Protocol */ +#define IPPROTO_EGP IPPROTO_EGP IPPROTO_PUP = 12, /* PUP protocol */ +#define IPPROTO_PUP IPPROTO_PUP IPPROTO_UDP = 17, /* User Datagram Protocol */ +#define IPPROTO_UDP IPPROTO_UDP IPPROTO_IDP = 22, /* XNS IDP protocol */ +#define IPPROTO_IDP IPPROTO_IDP + IPPROTO_TP = 29, /* SO Transport Protocol Class 4 */ +#define IPPROTO_TP IPPROTO_TP IPPROTO_DCCP = 33, /* Datagram Congestion Control Protocol */ - IPPROTO_RSVP = 46, /* RSVP protocol */ +#define IPPROTO_DCCP IPPROTO_DCCP + IPPROTO_IPV6 = 41, /* IPv6-in-IPv4 tunnelling */ +#define IPPROTO_IPV6 IPPROTO_IPV6 + IPPROTO_RSVP = 46, /* RSVP Protocol */ +#define IPPROTO_RSVP IPPROTO_RSVP IPPROTO_GRE = 47, /* Cisco GRE tunnels (rfc 1701,1702) */ - - IPPROTO_IPV6 = 41, /* IPv6-in-IPv4 tunnelling */ - - IPPROTO_ESP = 50, /* Encapsulation Security Payload protocol */ - IPPROTO_AH = 51, /* Authentication Header protocol */ - IPPROTO_BEETPH = 94, /* IP option pseudo header for BEET */ - IPPROTO_PIM = 103, /* Protocol Independent Multicast */ - - IPPROTO_COMP = 108, /* Compression Header protocol */ - IPPROTO_SCTP = 132, /* Stream Control Transport Protocol */ +#define IPPROTO_GRE IPPROTO_GRE + IPPROTO_ESP = 50, /* Encapsulation Security Payload protocol */ +#define IPPROTO_ESP IPPROTO_ESP + IPPROTO_AH = 51, /* Authentication Header protocol */ +#define IPPROTO_AH IPPROTO_AH + IPPROTO_MTP = 92, /* Multicast Transport Protocol */ +#define IPPROTO_MTP IPPROTO_MTP + IPPROTO_BEETPH = 94, /* IP option pseudo header for BEET */ +#define IPPROTO_BEETPH IPPROTO_BEETPH + IPPROTO_ENCAP = 98, /* Encapsulation Header */ +#define IPPROTO_ENCAP IPPROTO_ENCAP + IPPROTO_PIM = 103, /* Protocol Independent Multicast */ +#define IPPROTO_PIM IPPROTO_PIM + IPPROTO_COMP = 108, /* Compression Header Protocol */ +#define IPPROTO_COMP IPPROTO_COMP + IPPROTO_SCTP = 132, /* Stream Control Transport Protocol */ +#define IPPROTO_SCTP IPPROTO_SCTP IPPROTO_UDPLITE = 136, /* UDP-Lite (RFC 3828) */ - - IPPROTO_RAW = 255, /* Raw IP packets */ +#define IPPROTO_UDPLITE IPPROTO_UDPLITE + IPPROTO_RAW = 255, /* Raw IP packets */ +#define IPPROTO_RAW IPPROTO_RAW IPPROTO_MAX }; @@ -92,6 +115,15 @@ struct in_addr { #define IP_PMTUDISC_WANT 1 /* Use per route hints */ #define IP_PMTUDISC_DO 2 /* Always DF */ #define IP_PMTUDISC_PROBE 3 /* Ignore dst pmtu */ +/* Always use interface mtu (ignores dst pmtu) but don't set DF flag. + * Also incoming ICMP frag_needed notifications will be ignored on + * this socket to prevent accepting spoofed ones. + */ +#define IP_PMTUDISC_INTERFACE 4 +/* weaker version of IP_PMTUDISC_INTERFACE, which allos packets to get + * fragmented if they exeed the interface mtu + */ +#define IP_PMTUDISC_OMIT 5 #define IP_MULTICAST_IF 32 #define IP_MULTICAST_TTL 33 diff --git a/include/uapi/linux/in6.h b/include/uapi/linux/in6.h index f79c3721da6..0d8e0f0342d 100644 --- a/include/uapi/linux/in6.h +++ b/include/uapi/linux/in6.h @@ -22,27 +22,30 @@ #define _UAPI_LINUX_IN6_H #include <linux/types.h> +#include <linux/libc-compat.h> /* * IPv6 address structure */ +#if __UAPI_DEF_IN6_ADDR struct in6_addr { union { __u8 u6_addr8[16]; +#if __UAPI_DEF_IN6_ADDR_ALT __be16 u6_addr16[8]; __be32 u6_addr32[4]; +#endif } in6_u; #define s6_addr in6_u.u6_addr8 +#if __UAPI_DEF_IN6_ADDR_ALT #define s6_addr16 in6_u.u6_addr16 #define s6_addr32 in6_u.u6_addr32 +#endif }; +#endif /* __UAPI_DEF_IN6_ADDR */ -/* IPv6 Wildcard Address (::) and Loopback Address (::1) defined in RFC2553 - * NOTE: Be aware the IN6ADDR_* constants and in6addr_* externals are defined - * in network byte order, not in host byte order as are the IPv4 equivalents - */ - +#if __UAPI_DEF_SOCKADDR_IN6 struct sockaddr_in6 { unsigned short int sin6_family; /* AF_INET6 */ __be16 sin6_port; /* Transport layer port # */ @@ -50,7 +53,9 @@ struct sockaddr_in6 { struct in6_addr sin6_addr; /* IPv6 address */ __u32 sin6_scope_id; /* scope id (new in RFC2553) */ }; +#endif /* __UAPI_DEF_SOCKADDR_IN6 */ +#if __UAPI_DEF_IPV6_MREQ struct ipv6_mreq { /* IPv6 multicast address of group */ struct in6_addr ipv6mr_multiaddr; @@ -58,6 +63,7 @@ struct ipv6_mreq { /* local IPv6 address of interface */ int ipv6mr_ifindex; }; +#endif /* __UAPI_DEF_IVP6_MREQ */ #define ipv6mr_acaddr ipv6mr_multiaddr @@ -79,6 +85,8 @@ struct in6_flowlabel_req { #define IPV6_FL_F_CREATE 1 #define IPV6_FL_F_EXCL 2 +#define IPV6_FL_F_REFLECT 4 +#define IPV6_FL_F_REMOTE 8 #define IPV6_FL_S_NONE 0 #define IPV6_FL_S_EXCL 1 @@ -119,6 +127,7 @@ struct in6_flowlabel_req { /* * IPV6 extension headers */ +#if __UAPI_DEF_IPPROTO_V6 #define IPPROTO_HOPOPTS 0 /* IPv6 hop-by-hop options */ #define IPPROTO_ROUTING 43 /* IPv6 routing header */ #define IPPROTO_FRAGMENT 44 /* IPv6 fragmentation header */ @@ -126,6 +135,7 @@ struct in6_flowlabel_req { #define IPPROTO_NONE 59 /* IPv6 no next header */ #define IPPROTO_DSTOPTS 60 /* IPv6 destination options */ #define IPPROTO_MH 135 /* IPv6 mobility header */ +#endif /* __UAPI_DEF_IPPROTO_V6 */ /* * IPv6 TLV options. @@ -171,6 +181,14 @@ struct in6_flowlabel_req { #define IPV6_PMTUDISC_WANT 1 #define IPV6_PMTUDISC_DO 2 #define IPV6_PMTUDISC_PROBE 3 +/* same as IPV6_PMTUDISC_PROBE, provided for symetry with IPv4 + * also see comments on IP_PMTUDISC_INTERFACE + */ +#define IPV6_PMTUDISC_INTERFACE 4 +/* weaker version of IPV6_PMTUDISC_INTERFACE, which allows packets to + * get fragmented if they exceed the interface mtu + */ +#define IPV6_PMTUDISC_OMIT 5 /* Flowlabel */ #define IPV6_FLOWLABEL_MGR 32 @@ -264,17 +282,10 @@ struct in6_flowlabel_req { /* * Multicast Routing: - * see include/linux/mroute6.h. + * see include/uapi/linux/mroute6.h. * - * MRT6_INIT 200 - * MRT6_DONE 201 - * MRT6_ADD_MIF 202 - * MRT6_DEL_MIF 203 - * MRT6_ADD_MFC 204 - * MRT6_DEL_MFC 205 - * MRT6_VERSION 206 - * MRT6_ASSERT 207 - * MRT6_PIM 208 - * (reserved) 209 + * MRT6_BASE 200 + * ... + * MRT6_MAX */ #endif /* _UAPI_LINUX_IN6_H */ diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h index 935119c698a..19df18c9b8b 100644 --- a/include/uapi/linux/input.h +++ b/include/uapi/linux/input.h @@ -152,6 +152,7 @@ struct input_keymap_entry { #define EVIOCGEFFECTS _IOR('E', 0x84, int) /* Report number of effects playable at the same time */ #define EVIOCGRAB _IOW('E', 0x90, int) /* Grab/Release device */ +#define EVIOCREVOKE _IOW('E', 0x91, int) /* Revoke device access */ #define EVIOCSCLOCKID _IOW('E', 0xa0, int) /* Set clockid to be used for timestamps */ @@ -163,6 +164,7 @@ struct input_keymap_entry { #define INPUT_PROP_DIRECT 0x01 /* direct input devices */ #define INPUT_PROP_BUTTONPAD 0x02 /* has button(s) under pad */ #define INPUT_PROP_SEMI_MT 0x03 /* touch rectangle only */ +#define INPUT_PROP_TOPBUTTONPAD 0x04 /* softbuttons at top of pad */ #define INPUT_PROP_MAX 0x1f #define INPUT_PROP_CNT (INPUT_PROP_MAX + 1) @@ -194,6 +196,8 @@ struct input_keymap_entry { #define SYN_CONFIG 1 #define SYN_MT_REPORT 2 #define SYN_DROPPED 3 +#define SYN_MAX 0xf +#define SYN_CNT (SYN_MAX+1) /* * Keys and buttons @@ -458,10 +462,14 @@ struct input_keymap_entry { #define KEY_VIDEO_NEXT 241 /* drive next video source */ #define KEY_VIDEO_PREV 242 /* drive previous video source */ #define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */ -#define KEY_BRIGHTNESS_ZERO 244 /* brightness off, use ambient */ +#define KEY_BRIGHTNESS_AUTO 244 /* Set Auto Brightness: manual + brightness control is off, + rely on ambient */ +#define KEY_BRIGHTNESS_ZERO KEY_BRIGHTNESS_AUTO #define KEY_DISPLAY_OFF 245 /* display device to off state */ -#define KEY_WIMAX 246 +#define KEY_WWAN 246 /* Wireless WAN (LTE, UMTS, GSM, etc.) */ +#define KEY_WIMAX KEY_WWAN #define KEY_RFKILL 247 /* Key that controls all radios */ #define KEY_MICMUTE 248 /* Mute / unmute the microphone */ @@ -506,11 +514,15 @@ struct input_keymap_entry { #define BTN_DEAD 0x12f #define BTN_GAMEPAD 0x130 -#define BTN_A 0x130 -#define BTN_B 0x131 +#define BTN_SOUTH 0x130 +#define BTN_A BTN_SOUTH +#define BTN_EAST 0x131 +#define BTN_B BTN_EAST #define BTN_C 0x132 -#define BTN_X 0x133 -#define BTN_Y 0x134 +#define BTN_NORTH 0x133 +#define BTN_X BTN_NORTH +#define BTN_WEST 0x134 +#define BTN_Y BTN_WEST #define BTN_Z 0x135 #define BTN_TL 0x136 #define BTN_TR 0x137 @@ -623,6 +635,7 @@ struct input_keymap_entry { #define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */ #define KEY_MESSENGER 0x1ae /* AL Instant Messaging */ #define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */ +#define KEY_BRIGHTNESS_TOGGLE KEY_DISPLAYTOGGLE #define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */ #define KEY_LOGOFF 0x1b1 /* AL Logoff */ @@ -702,6 +715,29 @@ struct input_keymap_entry { #define KEY_CAMERA_LEFT 0x219 #define KEY_CAMERA_RIGHT 0x21a +#define KEY_ATTENDANT_ON 0x21b +#define KEY_ATTENDANT_OFF 0x21c +#define KEY_ATTENDANT_TOGGLE 0x21d /* Attendant call on or off */ +#define KEY_LIGHTS_TOGGLE 0x21e /* Reading light on or off */ + +#define BTN_DPAD_UP 0x220 +#define BTN_DPAD_DOWN 0x221 +#define BTN_DPAD_LEFT 0x222 +#define BTN_DPAD_RIGHT 0x223 + +#define KEY_ALS_TOGGLE 0x230 /* Ambient light sensor */ + +#define KEY_BUTTONCONFIG 0x240 /* AL Button Configuration */ +#define KEY_TASKMANAGER 0x241 /* AL Task/Project Manager */ +#define KEY_JOURNAL 0x242 /* AL Log/Journal/Timecard */ +#define KEY_CONTROLPANEL 0x243 /* AL Control Panel */ +#define KEY_APPSELECT 0x244 /* AL Select Task/Application */ +#define KEY_SCREENSAVER 0x245 /* AL Screen Saver */ +#define KEY_VOICECOMMAND 0x246 /* Listening Voice Command */ + +#define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */ +#define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */ + #define BTN_TRIGGER_HAPPY 0x2c0 #define BTN_TRIGGER_HAPPY1 0x2c0 #define BTN_TRIGGER_HAPPY2 0x2c1 @@ -839,6 +875,7 @@ struct input_keymap_entry { #define SW_FRONT_PROXIMITY 0x0b /* set = front proximity sensor active */ #define SW_ROTATE_LOCK 0x0c /* set = rotate locked/disabled */ #define SW_LINEIN_INSERT 0x0d /* set = inserted */ +#define SW_MUTE_DEVICE 0x0e /* set = device disabled */ #define SW_MAX 0x0f #define SW_CNT (SW_MAX+1) diff --git a/include/uapi/linux/ip.h b/include/uapi/linux/ip.h index 6cf06bfd841..411959405ab 100644 --- a/include/uapi/linux/ip.h +++ b/include/uapi/linux/ip.h @@ -133,4 +133,40 @@ struct ip_beet_phdr { __u8 reserved; }; +/* index values for the variables in ipv4_devconf */ +enum +{ + IPV4_DEVCONF_FORWARDING=1, + IPV4_DEVCONF_MC_FORWARDING, + IPV4_DEVCONF_PROXY_ARP, + IPV4_DEVCONF_ACCEPT_REDIRECTS, + IPV4_DEVCONF_SECURE_REDIRECTS, + IPV4_DEVCONF_SEND_REDIRECTS, + IPV4_DEVCONF_SHARED_MEDIA, + IPV4_DEVCONF_RP_FILTER, + IPV4_DEVCONF_ACCEPT_SOURCE_ROUTE, + IPV4_DEVCONF_BOOTP_RELAY, + IPV4_DEVCONF_LOG_MARTIANS, + IPV4_DEVCONF_TAG, + IPV4_DEVCONF_ARPFILTER, + IPV4_DEVCONF_MEDIUM_ID, + IPV4_DEVCONF_NOXFRM, + IPV4_DEVCONF_NOPOLICY, + IPV4_DEVCONF_FORCE_IGMP_VERSION, + IPV4_DEVCONF_ARP_ANNOUNCE, + IPV4_DEVCONF_ARP_IGNORE, + IPV4_DEVCONF_PROMOTE_SECONDARIES, + IPV4_DEVCONF_ARP_ACCEPT, + IPV4_DEVCONF_ARP_NOTIFY, + IPV4_DEVCONF_ACCEPT_LOCAL, + IPV4_DEVCONF_SRC_VMARK, + IPV4_DEVCONF_PROXY_ARP_PVLAN, + IPV4_DEVCONF_ROUTE_LOCALNET, + IPV4_DEVCONF_IGMPV2_UNSOLICITED_REPORT_INTERVAL, + IPV4_DEVCONF_IGMPV3_UNSOLICITED_REPORT_INTERVAL, + __IPV4_DEVCONF_MAX +}; + +#define IPV4_DEVCONF_MAX (__IPV4_DEVCONF_MAX - 1) + #endif /* _UAPI_LINUX_IP_H */ diff --git a/include/uapi/linux/ip_vs.h b/include/uapi/linux/ip_vs.h index 8a2d438dc49..fbcffe8041f 100644 --- a/include/uapi/linux/ip_vs.h +++ b/include/uapi/linux/ip_vs.h @@ -20,6 +20,12 @@ #define IP_VS_SVC_F_PERSISTENT 0x0001 /* persistent port */ #define IP_VS_SVC_F_HASHED 0x0002 /* hashed entry */ #define IP_VS_SVC_F_ONEPACKET 0x0004 /* one-packet scheduling */ +#define IP_VS_SVC_F_SCHED1 0x0008 /* scheduler flag 1 */ +#define IP_VS_SVC_F_SCHED2 0x0010 /* scheduler flag 2 */ +#define IP_VS_SVC_F_SCHED3 0x0020 /* scheduler flag 3 */ + +#define IP_VS_SVC_F_SCHED_SH_FALLBACK IP_VS_SVC_F_SCHED1 /* SH fallback */ +#define IP_VS_SVC_F_SCHED_SH_PORT IP_VS_SVC_F_SCHED2 /* SH use port */ /* * Destination Server Flags @@ -280,8 +286,8 @@ struct ip_vs_daemon_user { #define IPVS_GENL_VERSION 0x1 struct ip_vs_flags { - __be32 flags; - __be32 mask; + __u32 flags; + __u32 mask; }; /* Generic Netlink command attributes */ @@ -328,7 +334,7 @@ enum { __IPVS_CMD_ATTR_MAX, }; -#define IPVS_CMD_ATTR_MAX (__IPVS_SVC_ATTR_MAX - 1) +#define IPVS_CMD_ATTR_MAX (__IPVS_CMD_ATTR_MAX - 1) /* * Attributes used to describe a service diff --git a/include/uapi/linux/ipmi.h b/include/uapi/linux/ipmi.h index 33fbc99b381..7b26a62e570 100644 --- a/include/uapi/linux/ipmi.h +++ b/include/uapi/linux/ipmi.h @@ -59,15 +59,7 @@ * if it becomes full and it is queried once a second to see if * anything is in it. Incoming commands to the driver will get * delivered as commands. - * - * This driver provides two main interfaces: one for in-kernel - * applications and another for userland applications. The - * capabilities are basically the same for both interface, although - * the interfaces are somewhat different. The stuff in the - * #ifdef __KERNEL__ below is the in-kernel interface. The userland - * interface is defined later in the file. */ - - + */ /* * This is an overlay for all the address types, so it's easy to diff --git a/include/uapi/linux/ipv6.h b/include/uapi/linux/ipv6.h index 5a2991cf025..593b0e32d95 100644 --- a/include/uapi/linux/ipv6.h +++ b/include/uapi/linux/ipv6.h @@ -63,6 +63,8 @@ struct ipv6_opt_hdr { #define ipv6_destopt_hdr ipv6_opt_hdr #define ipv6_hopopt_hdr ipv6_opt_hdr +/* Router Alert option values (RFC2711) */ +#define IPV6_OPT_ROUTERALERT_MLD 0x0000 /* MLD(RFC2710) */ /* * routing header type 0 (used in cmsghdr struct) @@ -158,6 +160,9 @@ enum { DEVCONF_ACCEPT_DAD, DEVCONF_FORCE_TLLAO, DEVCONF_NDISC_NOTIFY, + DEVCONF_MLDV1_UNSOLICITED_REPORT_INTERVAL, + DEVCONF_MLDV2_UNSOLICITED_REPORT_INTERVAL, + DEVCONF_SUPPRESS_FRAG_NDISC, DEVCONF_MAX }; diff --git a/include/uapi/linux/kexec.h b/include/uapi/linux/kexec.h index 104838f65bc..d6629d49a24 100644 --- a/include/uapi/linux/kexec.h +++ b/include/uapi/linux/kexec.h @@ -18,6 +18,7 @@ */ #define KEXEC_ARCH_DEFAULT ( 0 << 16) #define KEXEC_ARCH_386 ( 3 << 16) +#define KEXEC_ARCH_68K ( 4 << 16) #define KEXEC_ARCH_X86_64 (62 << 16) #define KEXEC_ARCH_PPC (20 << 16) #define KEXEC_ARCH_PPC64 (21 << 16) diff --git a/include/uapi/linux/keyctl.h b/include/uapi/linux/keyctl.h index c9b7f4faf97..840cb990abe 100644 --- a/include/uapi/linux/keyctl.h +++ b/include/uapi/linux/keyctl.h @@ -56,5 +56,6 @@ #define KEYCTL_REJECT 19 /* reject a partially constructed key */ #define KEYCTL_INSTANTIATE_IOV 20 /* instantiate a partially constructed key */ #define KEYCTL_INVALIDATE 21 /* invalidate a key */ +#define KEYCTL_GET_PERSISTENT 22 /* get a user's persistent keyring */ #endif /* _LINUX_KEYCTL_H */ diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index e6e5d4b1370..e11d8f170a6 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -115,6 +115,7 @@ struct kvm_irq_level { * ACPI gsi notion of irq. * For IA-64 (APIC model) IOAPIC0: irq 0-23; IOAPIC1: irq 24-47.. * For X86 (standard AT mode) PIC0/1: irq 0-15. IOAPIC0: 0-23.. + * For ARM: See Documentation/virtual/kvm/api.txt */ union { __u32 irq; @@ -168,6 +169,9 @@ struct kvm_pit_config { #define KVM_EXIT_PAPR_HCALL 19 #define KVM_EXIT_S390_UCONTROL 20 #define KVM_EXIT_WATCHDOG 21 +#define KVM_EXIT_S390_TSCH 22 +#define KVM_EXIT_EPR 23 +#define KVM_EXIT_SYSTEM_EVENT 24 /* For KVM_EXIT_INTERNAL_ERROR */ /* Emulate instruction failed. */ @@ -285,6 +289,26 @@ struct kvm_run { __u64 ret; __u64 args[9]; } papr_hcall; + /* KVM_EXIT_S390_TSCH */ + struct { + __u16 subchannel_id; + __u16 subchannel_nr; + __u32 io_int_parm; + __u32 io_int_word; + __u32 ipb; + __u8 dequeued; + } s390_tsch; + /* KVM_EXIT_EPR */ + struct { + __u32 epr; + } epr; + /* KVM_EXIT_SYSTEM_EVENT */ + struct { +#define KVM_SYSTEM_EVENT_SHUTDOWN 1 +#define KVM_SYSTEM_EVENT_RESET 2 + __u32 type; + __u64 flags; + } system_event; /* Fix the size of the union. */ char padding[256]; }; @@ -397,10 +421,24 @@ struct kvm_s390_psw { #define KVM_S390_PROGRAM_INT 0xfffe0001u #define KVM_S390_SIGP_SET_PREFIX 0xfffe0002u #define KVM_S390_RESTART 0xfffe0003u +#define KVM_S390_INT_PFAULT_INIT 0xfffe0004u +#define KVM_S390_INT_PFAULT_DONE 0xfffe0005u +#define KVM_S390_MCHK 0xfffe1000u +#define KVM_S390_INT_CLOCK_COMP 0xffff1004u +#define KVM_S390_INT_CPU_TIMER 0xffff1005u #define KVM_S390_INT_VIRTIO 0xffff2603u #define KVM_S390_INT_SERVICE 0xffff2401u #define KVM_S390_INT_EMERGENCY 0xffff1201u #define KVM_S390_INT_EXTERNAL_CALL 0xffff1202u +/* Anything below 0xfffe0000u is taken by INT_IO */ +#define KVM_S390_INT_IO(ai,cssid,ssid,schid) \ + (((schid)) | \ + ((ssid) << 16) | \ + ((cssid) << 18) | \ + ((ai) << 26)) +#define KVM_S390_INT_IO_MIN 0x00000000u +#define KVM_S390_INT_IO_MAX 0xfffdffffu + struct kvm_s390_interrupt { __u32 type; @@ -408,6 +446,69 @@ struct kvm_s390_interrupt { __u64 parm64; }; +struct kvm_s390_io_info { + __u16 subchannel_id; + __u16 subchannel_nr; + __u32 io_int_parm; + __u32 io_int_word; +}; + +struct kvm_s390_ext_info { + __u32 ext_params; + __u32 pad; + __u64 ext_params2; +}; + +struct kvm_s390_pgm_info { + __u64 trans_exc_code; + __u64 mon_code; + __u64 per_address; + __u32 data_exc_code; + __u16 code; + __u16 mon_class_nr; + __u8 per_code; + __u8 per_atmid; + __u8 exc_access_id; + __u8 per_access_id; + __u8 op_access_id; + __u8 pad[3]; +}; + +struct kvm_s390_prefix_info { + __u32 address; +}; + +struct kvm_s390_extcall_info { + __u16 code; +}; + +struct kvm_s390_emerg_info { + __u16 code; +}; + +struct kvm_s390_mchk_info { + __u64 cr14; + __u64 mcic; + __u64 failing_storage_address; + __u32 ext_damage_code; + __u32 pad; + __u8 fixed_logout[16]; +}; + +struct kvm_s390_irq { + __u64 type; + union { + struct kvm_s390_io_info io; + struct kvm_s390_ext_info ext; + struct kvm_s390_pgm_info pgm; + struct kvm_s390_emerg_info emerg; + struct kvm_s390_extcall_info extcall; + struct kvm_s390_prefix_info prefix; + struct kvm_s390_mchk_info mchk; + char reserved[64]; + } u; +}; + /* for KVM_SET_GUEST_DEBUG */ #define KVM_GUESTDBG_ENABLE 0x00000001 @@ -423,19 +524,23 @@ enum { kvm_ioeventfd_flag_nr_datamatch, kvm_ioeventfd_flag_nr_pio, kvm_ioeventfd_flag_nr_deassign, + kvm_ioeventfd_flag_nr_virtio_ccw_notify, + kvm_ioeventfd_flag_nr_fast_mmio, kvm_ioeventfd_flag_nr_max, }; #define KVM_IOEVENTFD_FLAG_DATAMATCH (1 << kvm_ioeventfd_flag_nr_datamatch) #define KVM_IOEVENTFD_FLAG_PIO (1 << kvm_ioeventfd_flag_nr_pio) #define KVM_IOEVENTFD_FLAG_DEASSIGN (1 << kvm_ioeventfd_flag_nr_deassign) +#define KVM_IOEVENTFD_FLAG_VIRTIO_CCW_NOTIFY \ + (1 << kvm_ioeventfd_flag_nr_virtio_ccw_notify) #define KVM_IOEVENTFD_VALID_FLAG_MASK ((1 << kvm_ioeventfd_flag_nr_max) - 1) struct kvm_ioeventfd { __u64 datamatch; __u64 addr; /* legal pio/mmio address */ - __u32 len; /* 1, 2, 4, or 8 bytes */ + __u32 len; /* 1, 2, 4, or 8 bytes; or 0 to ignore length */ __s32 fd; __u32 flags; __u8 pad[36]; @@ -489,6 +594,10 @@ struct kvm_ppc_smmu_info { /* machine type bits, to be used as argument to KVM_CREATE_VM */ #define KVM_VM_S390_UCONTROL 1 +/* on ppc, 0 indicate default, 1 should force HV and 2 PR */ +#define KVM_VM_PPC_HV 1 +#define KVM_VM_PPC_PR 2 + #define KVM_S390_SIE_PAGE_OFFSET 1 /* @@ -512,6 +621,7 @@ struct kvm_ppc_smmu_info { #define KVM_TRACE_ENABLE __KVM_DEPRECATED_MAIN_W_0x06 #define KVM_TRACE_PAUSE __KVM_DEPRECATED_MAIN_0x07 #define KVM_TRACE_DISABLE __KVM_DEPRECATED_MAIN_0x08 +#define KVM_GET_EMULATED_CPUID _IOWR(KVMIO, 0x09, struct kvm_cpuid2) /* * Extension capability list. @@ -532,9 +642,7 @@ struct kvm_ppc_smmu_info { #define KVM_CAP_MP_STATE 14 #define KVM_CAP_COALESCED_MMIO 15 #define KVM_CAP_SYNC_MMU 16 /* Changes to host mmap are reflected in guest */ -#ifdef __KVM_HAVE_DEVICE_ASSIGNMENT #define KVM_CAP_DEVICE_ASSIGNMENT 17 -#endif #define KVM_CAP_IOMMU 18 #ifdef __KVM_HAVE_MSI #define KVM_CAP_DEVICE_MSI 20 @@ -550,13 +658,9 @@ struct kvm_ppc_smmu_info { #ifdef __KVM_HAVE_PIT #define KVM_CAP_REINJECT_CONTROL 24 #endif -#ifdef __KVM_HAVE_IOAPIC #define KVM_CAP_IRQ_ROUTING 25 -#endif #define KVM_CAP_IRQ_INJECT_STATUS 26 -#ifdef __KVM_HAVE_DEVICE_ASSIGNMENT #define KVM_CAP_DEVICE_DEASSIGNMENT 27 -#endif #ifdef __KVM_HAVE_MSIX #define KVM_CAP_DEVICE_MSIX 28 #endif @@ -635,6 +739,25 @@ struct kvm_ppc_smmu_info { #define KVM_CAP_IRQFD_RESAMPLE 82 #define KVM_CAP_PPC_BOOKE_WATCHDOG 83 #define KVM_CAP_PPC_HTAB_FD 84 +#define KVM_CAP_S390_CSS_SUPPORT 85 +#define KVM_CAP_PPC_EPR 86 +#define KVM_CAP_ARM_PSCI 87 +#define KVM_CAP_ARM_SET_DEVICE_ADDR 88 +#define KVM_CAP_DEVICE_CTRL 89 +#define KVM_CAP_IRQ_MPIC 90 +#define KVM_CAP_PPC_RTAS 91 +#define KVM_CAP_IRQ_XICS 92 +#define KVM_CAP_ARM_EL1_32BIT 93 +#define KVM_CAP_SPAPR_MULTITCE 94 +#define KVM_CAP_EXT_EMUL_CPUID 95 +#define KVM_CAP_HYPERV_TIME 96 +#define KVM_CAP_IOAPIC_POLARITY_IGNORED 97 +#define KVM_CAP_ENABLE_CAP_VM 98 +#define KVM_CAP_S390_IRQCHIP 99 +#define KVM_CAP_IOEVENTFD_NO_LENGTH 100 +#define KVM_CAP_VM_ATTRIBUTES 101 +#define KVM_CAP_ARM_PSCI_0_2 102 +#define KVM_CAP_PPC_FIXUP_HCALL 103 #ifdef KVM_CAP_IRQ_ROUTING @@ -650,9 +773,18 @@ struct kvm_irq_routing_msi { __u32 pad; }; +struct kvm_irq_routing_s390_adapter { + __u64 ind_addr; + __u64 summary_addr; + __u64 ind_offset; + __u32 summary_offset; + __u32 adapter_id; +}; + /* gsi routing entry types */ #define KVM_IRQ_ROUTING_IRQCHIP 1 #define KVM_IRQ_ROUTING_MSI 2 +#define KVM_IRQ_ROUTING_S390_ADAPTER 3 struct kvm_irq_routing_entry { __u32 gsi; @@ -662,6 +794,7 @@ struct kvm_irq_routing_entry { union { struct kvm_irq_routing_irqchip irqchip; struct kvm_irq_routing_msi msi; + struct kvm_irq_routing_s390_adapter adapter; __u32 pad[8]; } u; }; @@ -752,6 +885,8 @@ struct kvm_dirty_tlb { #define KVM_REG_IA64 0x3000000000000000ULL #define KVM_REG_ARM 0x4000000000000000ULL #define KVM_REG_S390 0x5000000000000000ULL +#define KVM_REG_ARM64 0x6000000000000000ULL +#define KVM_REG_MIPS 0x7000000000000000ULL #define KVM_REG_SIZE_SHIFT 52 #define KVM_REG_SIZE_MASK 0x00f0000000000000ULL @@ -764,6 +899,11 @@ struct kvm_dirty_tlb { #define KVM_REG_SIZE_U512 0x0060000000000000ULL #define KVM_REG_SIZE_U1024 0x0070000000000000ULL +struct kvm_reg_list { + __u64 n; /* number of regs */ + __u64 reg[0]; +}; + struct kvm_one_reg { __u64 id; __u64 addr; @@ -777,6 +917,39 @@ struct kvm_msi { __u8 pad[16]; }; +struct kvm_arm_device_addr { + __u64 id; + __u64 addr; +}; + +/* + * Device control API, available with KVM_CAP_DEVICE_CTRL + */ +#define KVM_CREATE_DEVICE_TEST 1 + +struct kvm_create_device { + __u32 type; /* in: KVM_DEV_TYPE_xxx */ + __u32 fd; /* out: device handle */ + __u32 flags; /* in: KVM_CREATE_DEVICE_xxx */ +}; + +struct kvm_device_attr { + __u32 flags; /* no flags currently defined */ + __u32 group; /* device-defined */ + __u64 attr; /* group-defined */ + __u64 addr; /* userspace address of attr data */ +}; + +#define KVM_DEV_TYPE_FSL_MPIC_20 1 +#define KVM_DEV_TYPE_FSL_MPIC_42 2 +#define KVM_DEV_TYPE_XICS 3 +#define KVM_DEV_TYPE_VFIO 4 +#define KVM_DEV_VFIO_GROUP 1 +#define KVM_DEV_VFIO_GROUP_ADD 1 +#define KVM_DEV_VFIO_GROUP_DEL 2 +#define KVM_DEV_TYPE_ARM_VGIC_V2 5 +#define KVM_DEV_TYPE_FLIC 6 + /* * ioctls for VM fds */ @@ -862,6 +1035,18 @@ struct kvm_s390_ucas_mapping { #define KVM_ALLOCATE_RMA _IOR(KVMIO, 0xa9, struct kvm_allocate_rma) /* Available with KVM_CAP_PPC_HTAB_FD */ #define KVM_PPC_GET_HTAB_FD _IOW(KVMIO, 0xaa, struct kvm_get_htab_fd) +/* Available with KVM_CAP_ARM_SET_DEVICE_ADDR */ +#define KVM_ARM_SET_DEVICE_ADDR _IOW(KVMIO, 0xab, struct kvm_arm_device_addr) +/* Available with KVM_CAP_PPC_RTAS */ +#define KVM_PPC_RTAS_DEFINE_TOKEN _IOW(KVMIO, 0xac, struct kvm_rtas_token_args) + +/* ioctl for vm fd */ +#define KVM_CREATE_DEVICE _IOWR(KVMIO, 0xe0, struct kvm_create_device) + +/* ioctls for fds returned by KVM_CREATE_DEVICE */ +#define KVM_SET_DEVICE_ATTR _IOW(KVMIO, 0xe1, struct kvm_device_attr) +#define KVM_GET_DEVICE_ATTR _IOW(KVMIO, 0xe2, struct kvm_device_attr) +#define KVM_HAS_DEVICE_ATTR _IOW(KVMIO, 0xe3, struct kvm_device_attr) /* * ioctls for vcpu fds @@ -918,6 +1103,10 @@ struct kvm_s390_ucas_mapping { /* Available with KVM_CAP_DEBUGREGS */ #define KVM_GET_DEBUGREGS _IOR(KVMIO, 0xa1, struct kvm_debugregs) #define KVM_SET_DEBUGREGS _IOW(KVMIO, 0xa2, struct kvm_debugregs) +/* + * vcpu version available with KVM_ENABLE_CAP + * vm version available with KVM_CAP_ENABLE_CAP_VM + */ #define KVM_ENABLE_CAP _IOW(KVMIO, 0xa3, struct kvm_enable_cap) /* Available with KVM_CAP_XSAVE */ #define KVM_GET_XSAVE _IOR(KVMIO, 0xa4, struct kvm_xsave) @@ -932,6 +1121,9 @@ struct kvm_s390_ucas_mapping { #define KVM_SET_ONE_REG _IOW(KVMIO, 0xac, struct kvm_one_reg) /* VM is being stopped by host */ #define KVM_KVMCLOCK_CTRL _IO(KVMIO, 0xad) +#define KVM_ARM_VCPU_INIT _IOW(KVMIO, 0xae, struct kvm_vcpu_init) +#define KVM_ARM_PREFERRED_TARGET _IOR(KVMIO, 0xaf, struct kvm_vcpu_init) +#define KVM_GET_REG_LIST _IOWR(KVMIO, 0xb0, struct kvm_reg_list) #define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0) #define KVM_DEV_ASSIGN_PCI_2_3 (1 << 1) diff --git a/include/uapi/linux/kvm_para.h b/include/uapi/linux/kvm_para.h index cea2c5c72d2..bf6cd7d5cac 100644 --- a/include/uapi/linux/kvm_para.h +++ b/include/uapi/linux/kvm_para.h @@ -19,6 +19,10 @@ #define KVM_HC_MMU_OP 2 #define KVM_HC_FEATURES 3 #define KVM_HC_PPC_MAP_MAGIC_PAGE 4 +#define KVM_HC_KICK_CPU 5 +#define KVM_HC_MIPS_GET_CLOCK_FREQ 6 +#define KVM_HC_MIPS_EXIT_VM 7 +#define KVM_HC_MIPS_CONSOLE_OUTPUT 8 /* * hypercalls use architecture specific diff --git a/include/uapi/linux/l2tp.h b/include/uapi/linux/l2tp.h index 8adb6816032..21caa2631c2 100644 --- a/include/uapi/linux/l2tp.h +++ b/include/uapi/linux/l2tp.h @@ -124,6 +124,8 @@ enum { L2TP_ATTR_STATS, /* nested */ L2TP_ATTR_IP6_SADDR, /* struct in6_addr */ L2TP_ATTR_IP6_DADDR, /* struct in6_addr */ + L2TP_ATTR_UDP_ZERO_CSUM6_TX, /* u8 */ + L2TP_ATTR_UDP_ZERO_CSUM6_RX, /* u8 */ __L2TP_ATTR_MAX, }; diff --git a/include/uapi/linux/libc-compat.h b/include/uapi/linux/libc-compat.h new file mode 100644 index 00000000000..c140620dad9 --- /dev/null +++ b/include/uapi/linux/libc-compat.h @@ -0,0 +1,112 @@ +/* + * Compatibility interface for userspace libc header coordination: + * + * Define compatibility macros that are used to control the inclusion or + * exclusion of UAPI structures and definitions in coordination with another + * userspace C library. + * + * This header is intended to solve the problem of UAPI definitions that + * conflict with userspace definitions. If a UAPI header has such conflicting + * definitions then the solution is as follows: + * + * * Synchronize the UAPI header and the libc headers so either one can be + * used and such that the ABI is preserved. If this is not possible then + * no simple compatibility interface exists (you need to write translating + * wrappers and rename things) and you can't use this interface. + * + * Then follow this process: + * + * (a) Include libc-compat.h in the UAPI header. + * e.g. #include <linux/libc-compat.h> + * This include must be as early as possible. + * + * (b) In libc-compat.h add enough code to detect that the comflicting + * userspace libc header has been included first. + * + * (c) If the userspace libc header has been included first define a set of + * guard macros of the form __UAPI_DEF_FOO and set their values to 1, else + * set their values to 0. + * + * (d) Back in the UAPI header with the conflicting definitions, guard the + * definitions with: + * #if __UAPI_DEF_FOO + * ... + * #endif + * + * This fixes the situation where the linux headers are included *after* the + * libc headers. To fix the problem with the inclusion in the other order the + * userspace libc headers must be fixed like this: + * + * * For all definitions that conflict with kernel definitions wrap those + * defines in the following: + * #if !__UAPI_DEF_FOO + * ... + * #endif + * + * This prevents the redefinition of a construct already defined by the kernel. + */ +#ifndef _UAPI_LIBC_COMPAT_H +#define _UAPI_LIBC_COMPAT_H + +/* We have included glibc headers... */ +#if defined(__GLIBC__) + +/* Coordinate with glibc netinet/in.h header. */ +#if defined(_NETINET_IN_H) + +/* GLIBC headers included first so don't define anything + * that would already be defined. */ +#define __UAPI_DEF_IN6_ADDR 0 +/* The exception is the in6_addr macros which must be defined + * if the glibc code didn't define them. This guard matches + * the guard in glibc/inet/netinet/in.h which defines the + * additional in6_addr macros e.g. s6_addr16, and s6_addr32. */ +#if defined(__USE_MISC) || defined (__USE_GNU) +#define __UAPI_DEF_IN6_ADDR_ALT 0 +#else +#define __UAPI_DEF_IN6_ADDR_ALT 1 +#endif +#define __UAPI_DEF_SOCKADDR_IN6 0 +#define __UAPI_DEF_IPV6_MREQ 0 +#define __UAPI_DEF_IPPROTO_V6 0 + +#else + +/* Linux headers included first, and we must define everything + * we need. The expectation is that glibc will check the + * __UAPI_DEF_* defines and adjust appropriately. */ +#define __UAPI_DEF_IN6_ADDR 1 +/* We unconditionally define the in6_addr macros and glibc must + * coordinate. */ +#define __UAPI_DEF_IN6_ADDR_ALT 1 +#define __UAPI_DEF_SOCKADDR_IN6 1 +#define __UAPI_DEF_IPV6_MREQ 1 +#define __UAPI_DEF_IPPROTO_V6 1 + +#endif /* _NETINET_IN_H */ + +/* Definitions for xattr.h */ +#if defined(_SYS_XATTR_H) +#define __UAPI_DEF_XATTR 0 +#else +#define __UAPI_DEF_XATTR 1 +#endif + +/* If we did not see any headers from any supported C libraries, + * or we are being included in the kernel, then define everything + * that we need. */ +#else /* !defined(__GLIBC__) */ + +/* Definitions for in6.h */ +#define __UAPI_DEF_IN6_ADDR 1 +#define __UAPI_DEF_IN6_ADDR_ALT 1 +#define __UAPI_DEF_SOCKADDR_IN6 1 +#define __UAPI_DEF_IPV6_MREQ 1 +#define __UAPI_DEF_IPPROTO_V6 1 + +/* Definitions for xattr.h */ +#define __UAPI_DEF_XATTR 1 + +#endif /* __GLIBC__ */ + +#endif /* _UAPI_LIBC_COMPAT_H */ diff --git a/include/uapi/linux/magic.h b/include/uapi/linux/magic.h index 873e086ce3a..77c60311a6c 100644 --- a/include/uapi/linux/magic.h +++ b/include/uapi/linux/magic.h @@ -11,6 +11,7 @@ #define DEBUGFS_MAGIC 0x64626720 #define SECURITYFS_MAGIC 0x73636673 #define SELINUX_MAGIC 0xf97cff8c +#define SMACK_MAGIC 0x43415d53 /* "SMAC" */ #define RAMFS_MAGIC 0x858458f6 /* some random number */ #define TMPFS_MAGIC 0x01021994 #define HUGETLBFS_MAGIC 0x958458f6 /* some random number */ @@ -29,6 +30,7 @@ #define JFFS2_SUPER_MAGIC 0x72b6 #define PSTOREFS_MAGIC 0x6165676C #define EFIVARFS_MAGIC 0xde5e81e4 +#define HOSTFS_SUPER_MAGIC 0x00c0ffee #define MINIX_SUPER_MAGIC 0x137F /* minix v1 fs, 14 char names */ #define MINIX_SUPER_MAGIC2 0x138F /* minix v1 fs, 30 char names */ @@ -69,6 +71,6 @@ #define USBDEVICE_SUPER_MAGIC 0x9fa2 #define MTD_INODE_FS_MAGIC 0x11307854 #define ANON_INODE_FS_MAGIC 0x09041934 - +#define BTRFS_TEST_MAGIC 0x73727279 #endif /* __LINUX_MAGIC_H__ */ diff --git a/include/uapi/linux/major.h b/include/uapi/linux/major.h index 6a8ca98c9a9..620252e69b4 100644 --- a/include/uapi/linux/major.h +++ b/include/uapi/linux/major.h @@ -54,6 +54,7 @@ #define ACSI_MAJOR 28 #define AZTECH_CDROM_MAJOR 29 #define FB_MAJOR 29 /* /dev/fb* framebuffers */ +#define MTD_BLOCK_MAJOR 31 #define CM206_CDROM_MAJOR 32 #define IDE2_MAJOR 33 #define IDE3_MAJOR 34 @@ -105,6 +106,7 @@ #define IDE6_MAJOR 88 #define IDE7_MAJOR 89 #define IDE8_MAJOR 90 +#define MTD_CHAR_MAJOR 90 #define IDE9_MAJOR 91 #define DASD_MAJOR 94 diff --git a/include/uapi/linux/media.h b/include/uapi/linux/media.h index 0ef883327de..d847c760e8f 100644 --- a/include/uapi/linux/media.h +++ b/include/uapi/linux/media.h @@ -56,6 +56,8 @@ struct media_device_info { #define MEDIA_ENT_T_V4L2_SUBDEV_SENSOR (MEDIA_ENT_T_V4L2_SUBDEV + 1) #define MEDIA_ENT_T_V4L2_SUBDEV_FLASH (MEDIA_ENT_T_V4L2_SUBDEV + 2) #define MEDIA_ENT_T_V4L2_SUBDEV_LENS (MEDIA_ENT_T_V4L2_SUBDEV + 3) +/* A converter of analogue video to its digital representation. */ +#define MEDIA_ENT_T_V4L2_SUBDEV_DECODER (MEDIA_ENT_T_V4L2_SUBDEV + 4) #define MEDIA_ENT_FL_DEFAULT (1 << 0) @@ -96,6 +98,7 @@ struct media_entity_desc { #define MEDIA_PAD_FL_SINK (1 << 0) #define MEDIA_PAD_FL_SOURCE (1 << 1) +#define MEDIA_PAD_FL_MUST_CONNECT (1 << 2) struct media_pad_desc { __u32 entity; /* entity ID */ diff --git a/include/uapi/linux/meye.h b/include/uapi/linux/meye.h index 0dd49954f74..8ff50fe9e48 100644 --- a/include/uapi/linux/meye.h +++ b/include/uapi/linux/meye.h @@ -57,10 +57,8 @@ struct meye_params { #define MEYEIOC_STILLJCAPT _IOR ('v', BASE_VIDIOC_PRIVATE+5, int) /* V4L2 private controls */ -#define V4L2_CID_AGC V4L2_CID_PRIVATE_BASE -#define V4L2_CID_MEYE_SHARPNESS (V4L2_CID_PRIVATE_BASE + 1) -#define V4L2_CID_PICTURE (V4L2_CID_PRIVATE_BASE + 2) -#define V4L2_CID_JPEGQUAL (V4L2_CID_PRIVATE_BASE + 3) -#define V4L2_CID_FRAMERATE (V4L2_CID_PRIVATE_BASE + 4) +#define V4L2_CID_MEYE_AGC (V4L2_CID_USER_MEYE_BASE + 0) +#define V4L2_CID_MEYE_PICTURE (V4L2_CID_USER_MEYE_BASE + 1) +#define V4L2_CID_MEYE_FRAMERATE (V4L2_CID_USER_MEYE_BASE + 2) #endif diff --git a/include/uapi/linux/mic_common.h b/include/uapi/linux/mic_common.h new file mode 100644 index 00000000000..6eb40244e01 --- /dev/null +++ b/include/uapi/linux/mic_common.h @@ -0,0 +1,232 @@ +/* + * Intel MIC Platform Software Stack (MPSS) + * + * Copyright(c) 2013 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Intel MIC driver. + * + */ +#ifndef __MIC_COMMON_H_ +#define __MIC_COMMON_H_ + +#include <linux/virtio_ring.h> + +#define __mic_align(a, x) (((a) + (x) - 1) & ~((x) - 1)) + +/** + * struct mic_device_desc: Virtio device information shared between the + * virtio driver and userspace backend + * + * @type: Device type: console/network/disk etc. Type 0/-1 terminates. + * @num_vq: Number of virtqueues. + * @feature_len: Number of bytes of feature bits. Multiply by 2: one for + host features and one for guest acknowledgements. + * @config_len: Number of bytes of the config array after virtqueues. + * @status: A status byte, written by the Guest. + * @config: Start of the following variable length config. + */ +struct mic_device_desc { + __s8 type; + __u8 num_vq; + __u8 feature_len; + __u8 config_len; + __u8 status; + __le64 config[0]; +} __attribute__ ((aligned(8))); + +/** + * struct mic_device_ctrl: Per virtio device information in the device page + * used internally by the host and card side drivers. + * + * @vdev: Used for storing MIC vdev information by the guest. + * @config_change: Set to 1 by host when a config change is requested. + * @vdev_reset: Set to 1 by guest to indicate virtio device has been reset. + * @guest_ack: Set to 1 by guest to ack a command. + * @host_ack: Set to 1 by host to ack a command. + * @used_address_updated: Set to 1 by guest when the used address should be + * updated. + * @c2h_vdev_db: The doorbell number to be used by guest. Set by host. + * @h2c_vdev_db: The doorbell number to be used by host. Set by guest. + */ +struct mic_device_ctrl { + __le64 vdev; + __u8 config_change; + __u8 vdev_reset; + __u8 guest_ack; + __u8 host_ack; + __u8 used_address_updated; + __s8 c2h_vdev_db; + __s8 h2c_vdev_db; +} __attribute__ ((aligned(8))); + +/** + * struct mic_bootparam: Virtio device independent information in device page + * + * @magic: A magic value used by the card to ensure it can see the host + * @c2h_shutdown_db: Card to Host shutdown doorbell set by host + * @h2c_shutdown_db: Host to Card shutdown doorbell set by card + * @h2c_config_db: Host to Card Virtio config doorbell set by card + * @shutdown_status: Card shutdown status set by card + * @shutdown_card: Set to 1 by the host when a card shutdown is initiated + */ +struct mic_bootparam { + __le32 magic; + __s8 c2h_shutdown_db; + __s8 h2c_shutdown_db; + __s8 h2c_config_db; + __u8 shutdown_status; + __u8 shutdown_card; +} __attribute__ ((aligned(8))); + +/** + * struct mic_device_page: High level representation of the device page + * + * @bootparam: The bootparam structure is used for sharing information and + * status updates between MIC host and card drivers. + * @desc: Array of MIC virtio device descriptors. + */ +struct mic_device_page { + struct mic_bootparam bootparam; + struct mic_device_desc desc[0]; +}; +/** + * struct mic_vqconfig: This is how we expect the device configuration field + * for a virtqueue to be laid out in config space. + * + * @address: Guest/MIC physical address of the virtio ring + * (avail and desc rings) + * @used_address: Guest/MIC physical address of the used ring + * @num: The number of entries in the virtio_ring + */ +struct mic_vqconfig { + __le64 address; + __le64 used_address; + __le16 num; +} __attribute__ ((aligned(8))); + +/* + * The alignment to use between consumer and producer parts of vring. + * This is pagesize for historical reasons. + */ +#define MIC_VIRTIO_RING_ALIGN 4096 + +#define MIC_MAX_VRINGS 4 +#define MIC_VRING_ENTRIES 128 + +/* + * Max vring entries (power of 2) to ensure desc and avail rings + * fit in a single page + */ +#define MIC_MAX_VRING_ENTRIES 128 + +/** + * Max size of the desc block in bytes: includes: + * - struct mic_device_desc + * - struct mic_vqconfig (num_vq of these) + * - host and guest features + * - virtio device config space + */ +#define MIC_MAX_DESC_BLK_SIZE 256 + +/** + * struct _mic_vring_info - Host vring info exposed to userspace backend + * for the avail index and magic for the card. + * + * @avail_idx: host avail idx + * @magic: A magic debug cookie. + */ +struct _mic_vring_info { + __u16 avail_idx; + __le32 magic; +}; + +/** + * struct mic_vring - Vring information. + * + * @vr: The virtio ring. + * @info: Host vring information exposed to the userspace backend for the + * avail index and magic for the card. + * @va: The va for the buffer allocated for vr and info. + * @len: The length of the buffer required for allocating vr and info. + */ +struct mic_vring { + struct vring vr; + struct _mic_vring_info *info; + void *va; + int len; +}; + +#define mic_aligned_desc_size(d) __mic_align(mic_desc_size(d), 8) + +#ifndef INTEL_MIC_CARD +static inline unsigned mic_desc_size(const struct mic_device_desc *desc) +{ + return sizeof(*desc) + desc->num_vq * sizeof(struct mic_vqconfig) + + desc->feature_len * 2 + desc->config_len; +} + +static inline struct mic_vqconfig * +mic_vq_config(const struct mic_device_desc *desc) +{ + return (struct mic_vqconfig *)(desc + 1); +} + +static inline __u8 *mic_vq_features(const struct mic_device_desc *desc) +{ + return (__u8 *)(mic_vq_config(desc) + desc->num_vq); +} + +static inline __u8 *mic_vq_configspace(const struct mic_device_desc *desc) +{ + return mic_vq_features(desc) + desc->feature_len * 2; +} +static inline unsigned mic_total_desc_size(struct mic_device_desc *desc) +{ + return mic_aligned_desc_size(desc) + sizeof(struct mic_device_ctrl); +} +#endif + +/* Device page size */ +#define MIC_DP_SIZE 4096 + +#define MIC_MAGIC 0xc0ffee00 + +/** + * enum mic_states - MIC states. + */ +enum mic_states { + MIC_OFFLINE = 0, + MIC_ONLINE, + MIC_SHUTTING_DOWN, + MIC_RESET_FAILED, + MIC_SUSPENDING, + MIC_SUSPENDED, + MIC_LAST +}; + +/** + * enum mic_status - MIC status reported by card after + * a host or card initiated shutdown or a card crash. + */ +enum mic_status { + MIC_NOP = 0, + MIC_CRASHED, + MIC_HALTED, + MIC_POWER_OFF, + MIC_RESTART, + MIC_STATUS_LAST +}; + +#endif diff --git a/include/uapi/linux/mic_ioctl.h b/include/uapi/linux/mic_ioctl.h new file mode 100644 index 00000000000..feb0b4c0814 --- /dev/null +++ b/include/uapi/linux/mic_ioctl.h @@ -0,0 +1,76 @@ +/* + * Intel MIC Platform Software Stack (MPSS) + * + * Copyright(c) 2013 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Intel MIC Host driver. + * + */ +#ifndef _MIC_IOCTL_H_ +#define _MIC_IOCTL_H_ + +#include <linux/types.h> + +/* + * mic_copy - MIC virtio descriptor copy. + * + * @iov: An array of IOVEC structures containing user space buffers. + * @iovcnt: Number of IOVEC structures in iov. + * @vr_idx: The vring index. + * @update_used: A non zero value results in used index being updated. + * @out_len: The aggregate of the total length written to or read from + * the virtio device. + */ +struct mic_copy_desc { +#ifdef __KERNEL__ + struct iovec __user *iov; +#else + struct iovec *iov; +#endif + __u32 iovcnt; + __u8 vr_idx; + __u8 update_used; + __u32 out_len; +}; + +/* + * Add a new virtio device + * The (struct mic_device_desc *) pointer points to a device page entry + * for the virtio device consisting of: + * - struct mic_device_desc + * - struct mic_vqconfig (num_vq of these) + * - host and guest features + * - virtio device config space + * The total size referenced by the pointer should equal the size returned + * by desc_size() in mic_common.h + */ +#define MIC_VIRTIO_ADD_DEVICE _IOWR('s', 1, struct mic_device_desc *) + +/* + * Copy the number of entries in the iovec and update the used index + * if requested by the user. + */ +#define MIC_VIRTIO_COPY_DESC _IOWR('s', 2, struct mic_copy_desc *) + +/* + * Notify virtio device of a config change + * The (__u8 *) pointer points to config space values for the device + * as they should be written into the device page. The total size + * referenced by the pointer should equal the config_len field of struct + * mic_device_desc. + */ +#define MIC_VIRTIO_CONFIG_CHANGE _IOWR('s', 5, __u8 *) + +#endif diff --git a/include/uapi/linux/mpls.h b/include/uapi/linux/mpls.h new file mode 100644 index 00000000000..bc9abfe88c9 --- /dev/null +++ b/include/uapi/linux/mpls.h @@ -0,0 +1,34 @@ +#ifndef _UAPI_MPLS_H +#define _UAPI_MPLS_H + +#include <linux/types.h> +#include <asm/byteorder.h> + +/* Reference: RFC 5462, RFC 3032 + * + * 0 1 2 3 + * 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * | Label | TC |S| TTL | + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * + * Label: Label Value, 20 bits + * TC: Traffic Class field, 3 bits + * S: Bottom of Stack, 1 bit + * TTL: Time to Live, 8 bits + */ + +struct mpls_label { + __be32 entry; +}; + +#define MPLS_LS_LABEL_MASK 0xFFFFF000 +#define MPLS_LS_LABEL_SHIFT 12 +#define MPLS_LS_TC_MASK 0x00000E00 +#define MPLS_LS_TC_SHIFT 9 +#define MPLS_LS_S_MASK 0x00000100 +#define MPLS_LS_S_SHIFT 8 +#define MPLS_LS_TTL_MASK 0x000000FF +#define MPLS_LS_TTL_SHIFT 0 + +#endif /* _UAPI_MPLS_H */ diff --git a/include/uapi/linux/mqueue.h b/include/uapi/linux/mqueue.h index 8b5a79615fb..d0a2b8e8981 100644 --- a/include/uapi/linux/mqueue.h +++ b/include/uapi/linux/mqueue.h @@ -23,11 +23,11 @@ #define MQ_BYTES_MAX 819200 struct mq_attr { - long mq_flags; /* message queue flags */ - long mq_maxmsg; /* maximum number of messages */ - long mq_msgsize; /* maximum message size */ - long mq_curmsgs; /* number of messages currently queued */ - long __reserved[4]; /* ignored for input, zeroed for output */ + __kernel_long_t mq_flags; /* message queue flags */ + __kernel_long_t mq_maxmsg; /* maximum number of messages */ + __kernel_long_t mq_msgsize; /* maximum message size */ + __kernel_long_t mq_curmsgs; /* number of messages currently queued */ + __kernel_long_t __reserved[4]; /* ignored for input, zeroed for output */ }; /* diff --git a/include/uapi/linux/mroute.h b/include/uapi/linux/mroute.h index 16929993acc..a382d2c04a4 100644 --- a/include/uapi/linux/mroute.h +++ b/include/uapi/linux/mroute.h @@ -26,6 +26,9 @@ #define MRT_ASSERT (MRT_BASE+7) /* Activate PIM assert mode */ #define MRT_PIM (MRT_BASE+8) /* enable PIM code */ #define MRT_TABLE (MRT_BASE+9) /* Specify mroute table ID */ +#define MRT_ADD_MFC_PROXY (MRT_BASE+10) /* Add a (*,*|G) mfc entry */ +#define MRT_DEL_MFC_PROXY (MRT_BASE+11) /* Del a (*,*|G) mfc entry */ +#define MRT_MAX (MRT_BASE+11) #define SIOCGETVIFCNT SIOCPROTOPRIVATE /* IP protocol privates */ #define SIOCGETSGCNT (SIOCPROTOPRIVATE+1) diff --git a/include/uapi/linux/mroute6.h b/include/uapi/linux/mroute6.h index 3e89b5e7f9e..ce91215cf7e 100644 --- a/include/uapi/linux/mroute6.h +++ b/include/uapi/linux/mroute6.h @@ -26,6 +26,9 @@ #define MRT6_ASSERT (MRT6_BASE+7) /* Activate PIM assert mode */ #define MRT6_PIM (MRT6_BASE+8) /* enable PIM code */ #define MRT6_TABLE (MRT6_BASE+9) /* Specify mroute table ID */ +#define MRT6_ADD_MFC_PROXY (MRT6_BASE+10) /* Add a (*,*|G) mfc entry */ +#define MRT6_DEL_MFC_PROXY (MRT6_BASE+11) /* Del a (*,*|G) mfc entry */ +#define MRT6_MAX (MRT6_BASE+11) #define SIOCGETMIFCNT_IN6 SIOCPROTOPRIVATE /* IP protocol privates */ #define SIOCGETSGCNT_IN6 (SIOCPROTOPRIVATE+1) diff --git a/include/uapi/linux/msdos_fs.h b/include/uapi/linux/msdos_fs.h index 996719f82e2..e284ff919d6 100644 --- a/include/uapi/linux/msdos_fs.h +++ b/include/uapi/linux/msdos_fs.h @@ -87,6 +87,8 @@ #define IS_FSINFO(x) (le32_to_cpu((x)->signature1) == FAT_FSINFO_SIG1 \ && le32_to_cpu((x)->signature2) == FAT_FSINFO_SIG2) +#define FAT_STATE_DIRTY 0x01 + struct __fat_dirent { long d_ino; __kernel_off_t d_off; @@ -102,6 +104,8 @@ struct __fat_dirent { /* <linux/videotext.h> has used 0x72 ('r') in collision, so skip a few */ #define FAT_IOCTL_GET_ATTRIBUTES _IOR('r', 0x10, __u32) #define FAT_IOCTL_SET_ATTRIBUTES _IOW('r', 0x11, __u32) +/*Android kernel has used 0x12, so we use 0x13*/ +#define FAT_IOCTL_GET_VOLUME_ID _IOR('r', 0x13, __u32) struct fat_boot_sector { __u8 ignored[3]; /* Boot strap short or near jump */ @@ -120,14 +124,42 @@ struct fat_boot_sector { __le32 hidden; /* hidden sectors (unused) */ __le32 total_sect; /* number of sectors (if sectors == 0) */ - /* The following fields are only used by FAT32 */ - __le32 fat32_length; /* sectors/FAT */ - __le16 flags; /* bit 8: fat mirroring, low 4: active fat */ - __u8 version[2]; /* major, minor filesystem version */ - __le32 root_cluster; /* first cluster in root directory */ - __le16 info_sector; /* filesystem info sector */ - __le16 backup_boot; /* backup boot sector */ - __le16 reserved2[6]; /* Unused */ + union { + struct { + /* Extended BPB Fields for FAT16 */ + __u8 drive_number; /* Physical drive number */ + __u8 state; /* undocumented, but used + for mount state. */ + __u8 signature; /* extended boot signature */ + __u8 vol_id[4]; /* volume ID */ + __u8 vol_label[11]; /* volume label */ + __u8 fs_type[8]; /* file system type */ + /* other fiealds are not added here */ + } fat16; + + struct { + /* only used by FAT32 */ + __le32 length; /* sectors/FAT */ + __le16 flags; /* bit 8: fat mirroring, + low 4: active fat */ + __u8 version[2]; /* major, minor filesystem + version */ + __le32 root_cluster; /* first cluster in + root directory */ + __le16 info_sector; /* filesystem info sector */ + __le16 backup_boot; /* backup boot sector */ + __le16 reserved2[6]; /* Unused */ + /* Extended BPB Fields for FAT32 */ + __u8 drive_number; /* Physical drive number */ + __u8 state; /* undocumented, but used + for mount state. */ + __u8 signature; /* extended boot signature */ + __u8 vol_id[4]; /* volume ID */ + __u8 vol_label[11]; /* volume label */ + __u8 fs_type[8]; /* file system type */ + /* other fiealds are not added here */ + } fat32; + }; }; struct fat_boot_fsinfo { diff --git a/include/uapi/linux/msg.h b/include/uapi/linux/msg.h index 22d95c6854e..a7037552657 100644 --- a/include/uapi/linux/msg.h +++ b/include/uapi/linux/msg.h @@ -34,8 +34,8 @@ struct msqid_ds { /* message buffer for msgsnd and msgrcv calls */ struct msgbuf { - long mtype; /* type of message */ - char mtext[1]; /* message text */ + __kernel_long_t mtype; /* type of message */ + char mtext[1]; /* message text */ }; /* buffer for msgctl calls IPC_INFO, MSG_INFO */ diff --git a/include/uapi/linux/nbd.h b/include/uapi/linux/nbd.h index dfb514472cb..4f52549b23f 100644 --- a/include/uapi/linux/nbd.h +++ b/include/uapi/linux/nbd.h @@ -33,13 +33,14 @@ enum { NBD_CMD_READ = 0, NBD_CMD_WRITE = 1, NBD_CMD_DISC = 2, - /* there is a gap here to match userspace */ + NBD_CMD_FLUSH = 3, NBD_CMD_TRIM = 4 }; /* values for flags field */ #define NBD_FLAG_HAS_FLAGS (1 << 0) /* nbd-server supports flags */ #define NBD_FLAG_READ_ONLY (1 << 1) /* device is read-only */ +#define NBD_FLAG_SEND_FLUSH (1 << 2) /* can flush writeback cache */ /* there is a gap here to match userspace */ #define NBD_FLAG_SEND_TRIM (1 << 5) /* send trim/discard */ diff --git a/include/uapi/linux/neighbour.h b/include/uapi/linux/neighbour.h index 275e5d65dcb..4a1d7e96dfe 100644 --- a/include/uapi/linux/neighbour.h +++ b/include/uapi/linux/neighbour.h @@ -20,6 +20,11 @@ enum { NDA_LLADDR, NDA_CACHEINFO, NDA_PROBES, + NDA_VLAN, + NDA_PORT, + NDA_VNI, + NDA_IFINDEX, + NDA_MASTER, __NDA_MAX }; @@ -54,7 +59,7 @@ enum { /* NUD_NOARP & NUD_PERMANENT are pseudostates, they never change and make no address resolution or NUD. - NUD_PERMANENT is also cannot be deleted by garbage collectors. + NUD_PERMANENT also cannot be deleted by garbage collectors. */ struct nda_cacheinfo { diff --git a/include/uapi/linux/net_tstamp.h b/include/uapi/linux/net_tstamp.h index ae5df122e42..f53879c0f59 100644 --- a/include/uapi/linux/net_tstamp.h +++ b/include/uapi/linux/net_tstamp.h @@ -26,17 +26,17 @@ enum { }; /** - * struct hwtstamp_config - %SIOCSHWTSTAMP parameter + * struct hwtstamp_config - %SIOCGHWTSTAMP and %SIOCSHWTSTAMP parameter * - * @flags: no flags defined right now, must be zero + * @flags: no flags defined right now, must be zero for %SIOCSHWTSTAMP * @tx_type: one of HWTSTAMP_TX_* - * @rx_type: one of one of HWTSTAMP_FILTER_* + * @rx_filter: one of HWTSTAMP_FILTER_* * - * %SIOCSHWTSTAMP expects a &struct ifreq with a ifr_data pointer to - * this structure. dev_ifsioc() in the kernel takes care of the - * translation between 32 bit userspace and 64 bit kernel. The - * structure is intentionally chosen so that it has the same layout on - * 32 and 64 bit systems, don't break this! + * %SIOCGHWTSTAMP and %SIOCSHWTSTAMP expect a &struct ifreq with a + * ifr_data pointer to this structure. For %SIOCSHWTSTAMP, if the + * driver or hardware does not support the requested @rx_filter value, + * the driver may use a more general filter mode. In this case + * @rx_filter will indicate the actual mode on return. */ struct hwtstamp_config { int flags; diff --git a/include/uapi/linux/netconf.h b/include/uapi/linux/netconf.h index 64804a798b0..669a1f0b1d9 100644 --- a/include/uapi/linux/netconf.h +++ b/include/uapi/linux/netconf.h @@ -14,6 +14,7 @@ enum { NETCONFA_FORWARDING, NETCONFA_RP_FILTER, NETCONFA_MC_FORWARDING, + NETCONFA_PROXY_NEIGH, __NETCONFA_MAX }; #define NETCONFA_MAX (__NETCONFA_MAX - 1) diff --git a/include/uapi/linux/netdevice.h b/include/uapi/linux/netdevice.h index 6b9500bc2d5..fdfbd1c1706 100644 --- a/include/uapi/linux/netdevice.h +++ b/include/uapi/linux/netdevice.h @@ -49,5 +49,11 @@ enum { IF_PORT_100BASEFX }; +/* hardware address assignment types */ +#define NET_ADDR_PERM 0 /* address is permanent (default) */ +#define NET_ADDR_RANDOM 1 /* address is generated randomly */ +#define NET_ADDR_STOLEN 2 /* address is stolen from other device */ +#define NET_ADDR_SET 3 /* address is set using + * dev_set_mac_address() */ #endif /* _UAPI_LINUX_NETDEVICE_H */ diff --git a/include/uapi/linux/netfilter.h b/include/uapi/linux/netfilter.h index f7dc0ebeeba..ef1b1f88ca1 100644 --- a/include/uapi/linux/netfilter.h +++ b/include/uapi/linux/netfilter.h @@ -53,6 +53,7 @@ enum nf_inet_hooks { enum { NFPROTO_UNSPEC = 0, + NFPROTO_INET = 1, NFPROTO_IPV4 = 2, NFPROTO_ARP = 3, NFPROTO_BRIDGE = 7, diff --git a/include/uapi/linux/netfilter/Kbuild b/include/uapi/linux/netfilter/Kbuild index 08f555fef13..1d973d2ba41 100644 --- a/include/uapi/linux/netfilter/Kbuild +++ b/include/uapi/linux/netfilter/Kbuild @@ -5,6 +5,8 @@ header-y += nf_conntrack_ftp.h header-y += nf_conntrack_sctp.h header-y += nf_conntrack_tcp.h header-y += nf_conntrack_tuple_common.h +header-y += nf_tables.h +header-y += nf_tables_compat.h header-y += nf_nat.h header-y += nfnetlink.h header-y += nfnetlink_acct.h @@ -22,6 +24,7 @@ header-y += xt_CONNMARK.h header-y += xt_CONNSECMARK.h header-y += xt_CT.h header-y += xt_DSCP.h +header-y += xt_HMARK.h header-y += xt_IDLETIMER.h header-y += xt_LED.h header-y += xt_LOG.h @@ -35,9 +38,12 @@ header-y += xt_TCPOPTSTRIP.h header-y += xt_TEE.h header-y += xt_TPROXY.h header-y += xt_addrtype.h +header-y += xt_bpf.h +header-y += xt_cgroup.h header-y += xt_cluster.h header-y += xt_comment.h header-y += xt_connbytes.h +header-y += xt_connlabel.h header-y += xt_connlimit.h header-y += xt_connmark.h header-y += xt_conntrack.h @@ -49,8 +55,10 @@ header-y += xt_ecn.h header-y += xt_esp.h header-y += xt_hashlimit.h header-y += xt_helper.h +header-y += xt_ipcomp.h header-y += xt_iprange.h header-y += xt_ipvs.h +header-y += xt_l2tp.h header-y += xt_length.h header-y += xt_limit.h header-y += xt_mac.h @@ -66,6 +74,7 @@ header-y += xt_quota.h header-y += xt_rateest.h header-y += xt_realm.h header-y += xt_recent.h +header-y += xt_rpfilter.h header-y += xt_sctp.h header-y += xt_set.h header-y += xt_socket.h diff --git a/include/uapi/linux/netfilter/ipset/ip_set.h b/include/uapi/linux/netfilter/ipset/ip_set.h index fbee42807a1..78c2f2e7992 100644 --- a/include/uapi/linux/netfilter/ipset/ip_set.h +++ b/include/uapi/linux/netfilter/ipset/ip_set.h @@ -10,12 +10,14 @@ #ifndef _UAPI_IP_SET_H #define _UAPI_IP_SET_H - #include <linux/types.h> /* The protocol version */ #define IPSET_PROTOCOL 6 +/* The maximum permissible comment length we will accept over netlink */ +#define IPSET_MAX_COMMENT_SIZE 255 + /* The max length of strings including NUL: set and type identifiers */ #define IPSET_MAXNAMELEN 32 @@ -80,6 +82,8 @@ enum { IPSET_ATTR_PROTO, /* 7 */ IPSET_ATTR_CADT_FLAGS, /* 8 */ IPSET_ATTR_CADT_LINENO = IPSET_ATTR_LINENO, /* 9 */ + IPSET_ATTR_MARK, /* 10 */ + IPSET_ATTR_MARKMASK, /* 11 */ /* Reserve empty slots */ IPSET_ATTR_CADT_MAX = 16, /* Create-only specific attributes */ @@ -108,6 +112,9 @@ enum { IPSET_ATTR_CIDR2, IPSET_ATTR_IP2_TO, IPSET_ATTR_IFACE, + IPSET_ATTR_BYTES, + IPSET_ATTR_PACKETS, + IPSET_ATTR_COMMENT, __IPSET_ATTR_ADT_MAX, }; #define IPSET_ATTR_ADT_MAX (__IPSET_ATTR_ADT_MAX - 1) @@ -137,12 +144,15 @@ enum ipset_errno { IPSET_ERR_REFERENCED, IPSET_ERR_IPADDR_IPV4, IPSET_ERR_IPADDR_IPV6, + IPSET_ERR_COUNTER, + IPSET_ERR_COMMENT, + IPSET_ERR_INVALID_MARKMASK, /* Type specific error codes */ IPSET_ERR_TYPE_SPECIFIC = 4352, }; -/* Flags at command level */ +/* Flags at command level or match/target flags, lower half of cmdattrs*/ enum ipset_cmd_flags { IPSET_FLAG_BIT_EXIST = 0, IPSET_FLAG_EXIST = (1 << IPSET_FLAG_BIT_EXIST), @@ -150,10 +160,20 @@ enum ipset_cmd_flags { IPSET_FLAG_LIST_SETNAME = (1 << IPSET_FLAG_BIT_LIST_SETNAME), IPSET_FLAG_BIT_LIST_HEADER = 2, IPSET_FLAG_LIST_HEADER = (1 << IPSET_FLAG_BIT_LIST_HEADER), - IPSET_FLAG_CMD_MAX = 15, /* Lower half */ + IPSET_FLAG_BIT_SKIP_COUNTER_UPDATE = 3, + IPSET_FLAG_SKIP_COUNTER_UPDATE = + (1 << IPSET_FLAG_BIT_SKIP_COUNTER_UPDATE), + IPSET_FLAG_BIT_SKIP_SUBCOUNTER_UPDATE = 4, + IPSET_FLAG_SKIP_SUBCOUNTER_UPDATE = + (1 << IPSET_FLAG_BIT_SKIP_SUBCOUNTER_UPDATE), + IPSET_FLAG_BIT_MATCH_COUNTERS = 5, + IPSET_FLAG_MATCH_COUNTERS = (1 << IPSET_FLAG_BIT_MATCH_COUNTERS), + IPSET_FLAG_BIT_RETURN_NOMATCH = 7, + IPSET_FLAG_RETURN_NOMATCH = (1 << IPSET_FLAG_BIT_RETURN_NOMATCH), + IPSET_FLAG_CMD_MAX = 15, }; -/* Flags at CADT attribute level */ +/* Flags at CADT attribute level, upper half of cmdattrs */ enum ipset_cadt_flags { IPSET_FLAG_BIT_BEFORE = 0, IPSET_FLAG_BEFORE = (1 << IPSET_FLAG_BIT_BEFORE), @@ -161,7 +181,20 @@ enum ipset_cadt_flags { IPSET_FLAG_PHYSDEV = (1 << IPSET_FLAG_BIT_PHYSDEV), IPSET_FLAG_BIT_NOMATCH = 2, IPSET_FLAG_NOMATCH = (1 << IPSET_FLAG_BIT_NOMATCH), - IPSET_FLAG_CADT_MAX = 15, /* Upper half */ + IPSET_FLAG_BIT_WITH_COUNTERS = 3, + IPSET_FLAG_WITH_COUNTERS = (1 << IPSET_FLAG_BIT_WITH_COUNTERS), + IPSET_FLAG_BIT_WITH_COMMENT = 4, + IPSET_FLAG_WITH_COMMENT = (1 << IPSET_FLAG_BIT_WITH_COMMENT), + IPSET_FLAG_BIT_WITH_FORCEADD = 5, + IPSET_FLAG_WITH_FORCEADD = (1 << IPSET_FLAG_BIT_WITH_FORCEADD), + IPSET_FLAG_CADT_MAX = 15, +}; + +/* The flag bits which correspond to the non-extension create flags */ +enum ipset_create_flags { + IPSET_CREATE_FLAG_BIT_FORCEADD = 0, + IPSET_CREATE_FLAG_FORCEADD = (1 << IPSET_CREATE_FLAG_BIT_FORCEADD), + IPSET_CREATE_FLAG_BIT_MAX = 7, }; /* Commands with settype-specific attributes */ @@ -190,6 +223,7 @@ enum ip_set_dim { * If changed, new revision of iptables match/target is required. */ IPSET_DIM_MAX = 6, + /* Backward compatibility: set match revision 2 */ IPSET_BIT_RETURN_NOMATCH = 7, }; @@ -202,6 +236,18 @@ enum ip_set_kopt { IPSET_RETURN_NOMATCH = (1 << IPSET_BIT_RETURN_NOMATCH), }; +enum { + IPSET_COUNTER_NONE = 0, + IPSET_COUNTER_EQ, + IPSET_COUNTER_NE, + IPSET_COUNTER_LT, + IPSET_COUNTER_GT, +}; + +struct ip_set_counter_match { + __u8 op; + __u64 value; +}; /* Interface to iptables/ip6tables */ @@ -222,6 +268,14 @@ struct ip_set_req_get_set { #define IP_SET_OP_GET_BYINDEX 0x00000007 /* Get set name by index */ /* Uses ip_set_req_get_set */ +#define IP_SET_OP_GET_FNAME 0x00000008 /* Get set index and family */ +struct ip_set_req_get_set_family { + unsigned int op; + unsigned int version; + unsigned int family; + union ip_set_name_index set; +}; + #define IP_SET_OP_VERSION 0x00000100 /* Ask kernel version */ struct ip_set_req_version { unsigned int op; diff --git a/include/uapi/linux/netfilter/nf_conntrack_common.h b/include/uapi/linux/netfilter/nf_conntrack_common.h index 1644cdd8be9..319f47128db 100644 --- a/include/uapi/linux/netfilter/nf_conntrack_common.h +++ b/include/uapi/linux/netfilter/nf_conntrack_common.h @@ -25,6 +25,10 @@ enum ip_conntrack_info { IP_CT_NUMBER = IP_CT_IS_REPLY * 2 - 1 }; +#define NF_CT_STATE_INVALID_BIT (1 << 0) +#define NF_CT_STATE_BIT(ctinfo) (1 << ((ctinfo) % IP_CT_IS_REPLY + 1)) +#define NF_CT_STATE_UNTRACKED_BIT (1 << (IP_CT_NUMBER + 1)) + /* Bitset representing status of connection. */ enum ip_conntrack_status { /* It's an expected connection: bit 0 set. This bit never changed */ @@ -99,8 +103,10 @@ enum ip_conntrack_events { IPCT_PROTOINFO, /* protocol information has changed */ IPCT_HELPER, /* new helper has been set */ IPCT_MARK, /* new mark has been set */ - IPCT_NATSEQADJ, /* NAT is doing sequence adjustment */ + IPCT_SEQADJ, /* sequence adjustment has changed */ + IPCT_NATSEQADJ = IPCT_SEQADJ, IPCT_SECMARK, /* new security mark has been set */ + IPCT_LABEL, /* new connlabel has been set */ }; enum ip_conntrack_expect_events { diff --git a/include/uapi/linux/netfilter/nf_nat.h b/include/uapi/linux/netfilter/nf_nat.h index bf0cc373ffb..1ad3659102b 100644 --- a/include/uapi/linux/netfilter/nf_nat.h +++ b/include/uapi/linux/netfilter/nf_nat.h @@ -4,10 +4,14 @@ #include <linux/netfilter.h> #include <linux/netfilter/nf_conntrack_tuple_common.h> -#define NF_NAT_RANGE_MAP_IPS 1 -#define NF_NAT_RANGE_PROTO_SPECIFIED 2 -#define NF_NAT_RANGE_PROTO_RANDOM 4 -#define NF_NAT_RANGE_PERSISTENT 8 +#define NF_NAT_RANGE_MAP_IPS (1 << 0) +#define NF_NAT_RANGE_PROTO_SPECIFIED (1 << 1) +#define NF_NAT_RANGE_PROTO_RANDOM (1 << 2) +#define NF_NAT_RANGE_PERSISTENT (1 << 3) +#define NF_NAT_RANGE_PROTO_RANDOM_FULLY (1 << 4) + +#define NF_NAT_RANGE_PROTO_RANDOM_ALL \ + (NF_NAT_RANGE_PROTO_RANDOM | NF_NAT_RANGE_PROTO_RANDOM_FULLY) struct nf_nat_ipv4_range { unsigned int flags; diff --git a/include/uapi/linux/netfilter/nf_tables.h b/include/uapi/linux/netfilter/nf_tables.h new file mode 100644 index 00000000000..2a88f645a5d --- /dev/null +++ b/include/uapi/linux/netfilter/nf_tables.h @@ -0,0 +1,789 @@ +#ifndef _LINUX_NF_TABLES_H +#define _LINUX_NF_TABLES_H + +#define NFT_CHAIN_MAXNAMELEN 32 +#define NFT_USERDATA_MAXLEN 256 + +enum nft_registers { + NFT_REG_VERDICT, + NFT_REG_1, + NFT_REG_2, + NFT_REG_3, + NFT_REG_4, + __NFT_REG_MAX +}; +#define NFT_REG_MAX (__NFT_REG_MAX - 1) + +/** + * enum nft_verdicts - nf_tables internal verdicts + * + * @NFT_CONTINUE: continue evaluation of the current rule + * @NFT_BREAK: terminate evaluation of the current rule + * @NFT_JUMP: push the current chain on the jump stack and jump to a chain + * @NFT_GOTO: jump to a chain without pushing the current chain on the jump stack + * @NFT_RETURN: return to the topmost chain on the jump stack + * + * The nf_tables verdicts share their numeric space with the netfilter verdicts. + */ +enum nft_verdicts { + NFT_CONTINUE = -1, + NFT_BREAK = -2, + NFT_JUMP = -3, + NFT_GOTO = -4, + NFT_RETURN = -5, +}; + +/** + * enum nf_tables_msg_types - nf_tables netlink message types + * + * @NFT_MSG_NEWTABLE: create a new table (enum nft_table_attributes) + * @NFT_MSG_GETTABLE: get a table (enum nft_table_attributes) + * @NFT_MSG_DELTABLE: delete a table (enum nft_table_attributes) + * @NFT_MSG_NEWCHAIN: create a new chain (enum nft_chain_attributes) + * @NFT_MSG_GETCHAIN: get a chain (enum nft_chain_attributes) + * @NFT_MSG_DELCHAIN: delete a chain (enum nft_chain_attributes) + * @NFT_MSG_NEWRULE: create a new rule (enum nft_rule_attributes) + * @NFT_MSG_GETRULE: get a rule (enum nft_rule_attributes) + * @NFT_MSG_DELRULE: delete a rule (enum nft_rule_attributes) + * @NFT_MSG_NEWSET: create a new set (enum nft_set_attributes) + * @NFT_MSG_GETSET: get a set (enum nft_set_attributes) + * @NFT_MSG_DELSET: delete a set (enum nft_set_attributes) + * @NFT_MSG_NEWSETELEM: create a new set element (enum nft_set_elem_attributes) + * @NFT_MSG_GETSETELEM: get a set element (enum nft_set_elem_attributes) + * @NFT_MSG_DELSETELEM: delete a set element (enum nft_set_elem_attributes) + */ +enum nf_tables_msg_types { + NFT_MSG_NEWTABLE, + NFT_MSG_GETTABLE, + NFT_MSG_DELTABLE, + NFT_MSG_NEWCHAIN, + NFT_MSG_GETCHAIN, + NFT_MSG_DELCHAIN, + NFT_MSG_NEWRULE, + NFT_MSG_GETRULE, + NFT_MSG_DELRULE, + NFT_MSG_NEWSET, + NFT_MSG_GETSET, + NFT_MSG_DELSET, + NFT_MSG_NEWSETELEM, + NFT_MSG_GETSETELEM, + NFT_MSG_DELSETELEM, + NFT_MSG_MAX, +}; + +/** + * enum nft_list_attributes - nf_tables generic list netlink attributes + * + * @NFTA_LIST_ELEM: list element (NLA_NESTED) + */ +enum nft_list_attributes { + NFTA_LIST_UNPEC, + NFTA_LIST_ELEM, + __NFTA_LIST_MAX +}; +#define NFTA_LIST_MAX (__NFTA_LIST_MAX - 1) + +/** + * enum nft_hook_attributes - nf_tables netfilter hook netlink attributes + * + * @NFTA_HOOK_HOOKNUM: netfilter hook number (NLA_U32) + * @NFTA_HOOK_PRIORITY: netfilter hook priority (NLA_U32) + */ +enum nft_hook_attributes { + NFTA_HOOK_UNSPEC, + NFTA_HOOK_HOOKNUM, + NFTA_HOOK_PRIORITY, + __NFTA_HOOK_MAX +}; +#define NFTA_HOOK_MAX (__NFTA_HOOK_MAX - 1) + +/** + * enum nft_table_flags - nf_tables table flags + * + * @NFT_TABLE_F_DORMANT: this table is not active + */ +enum nft_table_flags { + NFT_TABLE_F_DORMANT = 0x1, +}; + +/** + * enum nft_table_attributes - nf_tables table netlink attributes + * + * @NFTA_TABLE_NAME: name of the table (NLA_STRING) + * @NFTA_TABLE_FLAGS: bitmask of enum nft_table_flags (NLA_U32) + * @NFTA_TABLE_USE: number of chains in this table (NLA_U32) + */ +enum nft_table_attributes { + NFTA_TABLE_UNSPEC, + NFTA_TABLE_NAME, + NFTA_TABLE_FLAGS, + NFTA_TABLE_USE, + __NFTA_TABLE_MAX +}; +#define NFTA_TABLE_MAX (__NFTA_TABLE_MAX - 1) + +/** + * enum nft_chain_attributes - nf_tables chain netlink attributes + * + * @NFTA_CHAIN_TABLE: name of the table containing the chain (NLA_STRING) + * @NFTA_CHAIN_HANDLE: numeric handle of the chain (NLA_U64) + * @NFTA_CHAIN_NAME: name of the chain (NLA_STRING) + * @NFTA_CHAIN_HOOK: hook specification for basechains (NLA_NESTED: nft_hook_attributes) + * @NFTA_CHAIN_POLICY: numeric policy of the chain (NLA_U32) + * @NFTA_CHAIN_USE: number of references to this chain (NLA_U32) + * @NFTA_CHAIN_TYPE: type name of the string (NLA_NUL_STRING) + * @NFTA_CHAIN_COUNTERS: counter specification of the chain (NLA_NESTED: nft_counter_attributes) + */ +enum nft_chain_attributes { + NFTA_CHAIN_UNSPEC, + NFTA_CHAIN_TABLE, + NFTA_CHAIN_HANDLE, + NFTA_CHAIN_NAME, + NFTA_CHAIN_HOOK, + NFTA_CHAIN_POLICY, + NFTA_CHAIN_USE, + NFTA_CHAIN_TYPE, + NFTA_CHAIN_COUNTERS, + __NFTA_CHAIN_MAX +}; +#define NFTA_CHAIN_MAX (__NFTA_CHAIN_MAX - 1) + +/** + * enum nft_rule_attributes - nf_tables rule netlink attributes + * + * @NFTA_RULE_TABLE: name of the table containing the rule (NLA_STRING) + * @NFTA_RULE_CHAIN: name of the chain containing the rule (NLA_STRING) + * @NFTA_RULE_HANDLE: numeric handle of the rule (NLA_U64) + * @NFTA_RULE_EXPRESSIONS: list of expressions (NLA_NESTED: nft_expr_attributes) + * @NFTA_RULE_COMPAT: compatibility specifications of the rule (NLA_NESTED: nft_rule_compat_attributes) + * @NFTA_RULE_POSITION: numeric handle of the previous rule (NLA_U64) + * @NFTA_RULE_USERDATA: user data (NLA_BINARY, NFT_USERDATA_MAXLEN) + */ +enum nft_rule_attributes { + NFTA_RULE_UNSPEC, + NFTA_RULE_TABLE, + NFTA_RULE_CHAIN, + NFTA_RULE_HANDLE, + NFTA_RULE_EXPRESSIONS, + NFTA_RULE_COMPAT, + NFTA_RULE_POSITION, + NFTA_RULE_USERDATA, + __NFTA_RULE_MAX +}; +#define NFTA_RULE_MAX (__NFTA_RULE_MAX - 1) + +/** + * enum nft_rule_compat_flags - nf_tables rule compat flags + * + * @NFT_RULE_COMPAT_F_INV: invert the check result + */ +enum nft_rule_compat_flags { + NFT_RULE_COMPAT_F_INV = (1 << 1), + NFT_RULE_COMPAT_F_MASK = NFT_RULE_COMPAT_F_INV, +}; + +/** + * enum nft_rule_compat_attributes - nf_tables rule compat attributes + * + * @NFTA_RULE_COMPAT_PROTO: numerice value of handled protocol (NLA_U32) + * @NFTA_RULE_COMPAT_FLAGS: bitmask of enum nft_rule_compat_flags (NLA_U32) + */ +enum nft_rule_compat_attributes { + NFTA_RULE_COMPAT_UNSPEC, + NFTA_RULE_COMPAT_PROTO, + NFTA_RULE_COMPAT_FLAGS, + __NFTA_RULE_COMPAT_MAX +}; +#define NFTA_RULE_COMPAT_MAX (__NFTA_RULE_COMPAT_MAX - 1) + +/** + * enum nft_set_flags - nf_tables set flags + * + * @NFT_SET_ANONYMOUS: name allocation, automatic cleanup on unlink + * @NFT_SET_CONSTANT: set contents may not change while bound + * @NFT_SET_INTERVAL: set contains intervals + * @NFT_SET_MAP: set is used as a dictionary + */ +enum nft_set_flags { + NFT_SET_ANONYMOUS = 0x1, + NFT_SET_CONSTANT = 0x2, + NFT_SET_INTERVAL = 0x4, + NFT_SET_MAP = 0x8, +}; + +/** + * enum nft_set_policies - set selection policy + * + * @NFT_SET_POL_PERFORMANCE: prefer high performance over low memory use + * @NFT_SET_POL_MEMORY: prefer low memory use over high performance + */ +enum nft_set_policies { + NFT_SET_POL_PERFORMANCE, + NFT_SET_POL_MEMORY, +}; + +/** + * enum nft_set_desc_attributes - set element description + * + * @NFTA_SET_DESC_SIZE: number of elements in set (NLA_U32) + */ +enum nft_set_desc_attributes { + NFTA_SET_DESC_UNSPEC, + NFTA_SET_DESC_SIZE, + __NFTA_SET_DESC_MAX +}; +#define NFTA_SET_DESC_MAX (__NFTA_SET_DESC_MAX - 1) + +/** + * enum nft_set_attributes - nf_tables set netlink attributes + * + * @NFTA_SET_TABLE: table name (NLA_STRING) + * @NFTA_SET_NAME: set name (NLA_STRING) + * @NFTA_SET_FLAGS: bitmask of enum nft_set_flags (NLA_U32) + * @NFTA_SET_KEY_TYPE: key data type, informational purpose only (NLA_U32) + * @NFTA_SET_KEY_LEN: key data length (NLA_U32) + * @NFTA_SET_DATA_TYPE: mapping data type (NLA_U32) + * @NFTA_SET_DATA_LEN: mapping data length (NLA_U32) + * @NFTA_SET_POLICY: selection policy (NLA_U32) + * @NFTA_SET_DESC: set description (NLA_NESTED) + * @NFTA_SET_ID: uniquely identifies a set in a transaction (NLA_U32) + */ +enum nft_set_attributes { + NFTA_SET_UNSPEC, + NFTA_SET_TABLE, + NFTA_SET_NAME, + NFTA_SET_FLAGS, + NFTA_SET_KEY_TYPE, + NFTA_SET_KEY_LEN, + NFTA_SET_DATA_TYPE, + NFTA_SET_DATA_LEN, + NFTA_SET_POLICY, + NFTA_SET_DESC, + NFTA_SET_ID, + __NFTA_SET_MAX +}; +#define NFTA_SET_MAX (__NFTA_SET_MAX - 1) + +/** + * enum nft_set_elem_flags - nf_tables set element flags + * + * @NFT_SET_ELEM_INTERVAL_END: element ends the previous interval + */ +enum nft_set_elem_flags { + NFT_SET_ELEM_INTERVAL_END = 0x1, +}; + +/** + * enum nft_set_elem_attributes - nf_tables set element netlink attributes + * + * @NFTA_SET_ELEM_KEY: key value (NLA_NESTED: nft_data) + * @NFTA_SET_ELEM_DATA: data value of mapping (NLA_NESTED: nft_data_attributes) + * @NFTA_SET_ELEM_FLAGS: bitmask of nft_set_elem_flags (NLA_U32) + */ +enum nft_set_elem_attributes { + NFTA_SET_ELEM_UNSPEC, + NFTA_SET_ELEM_KEY, + NFTA_SET_ELEM_DATA, + NFTA_SET_ELEM_FLAGS, + __NFTA_SET_ELEM_MAX +}; +#define NFTA_SET_ELEM_MAX (__NFTA_SET_ELEM_MAX - 1) + +/** + * enum nft_set_elem_list_attributes - nf_tables set element list netlink attributes + * + * @NFTA_SET_ELEM_LIST_TABLE: table of the set to be changed (NLA_STRING) + * @NFTA_SET_ELEM_LIST_SET: name of the set to be changed (NLA_STRING) + * @NFTA_SET_ELEM_LIST_ELEMENTS: list of set elements (NLA_NESTED: nft_set_elem_attributes) + * @NFTA_SET_ELEM_LIST_SET_ID: uniquely identifies a set in a transaction (NLA_U32) + */ +enum nft_set_elem_list_attributes { + NFTA_SET_ELEM_LIST_UNSPEC, + NFTA_SET_ELEM_LIST_TABLE, + NFTA_SET_ELEM_LIST_SET, + NFTA_SET_ELEM_LIST_ELEMENTS, + NFTA_SET_ELEM_LIST_SET_ID, + __NFTA_SET_ELEM_LIST_MAX +}; +#define NFTA_SET_ELEM_LIST_MAX (__NFTA_SET_ELEM_LIST_MAX - 1) + +/** + * enum nft_data_types - nf_tables data types + * + * @NFT_DATA_VALUE: generic data + * @NFT_DATA_VERDICT: netfilter verdict + * + * The type of data is usually determined by the kernel directly and is not + * explicitly specified by userspace. The only difference are sets, where + * userspace specifies the key and mapping data types. + * + * The values 0xffffff00-0xffffffff are reserved for internally used types. + * The remaining range can be freely used by userspace to encode types, all + * values are equivalent to NFT_DATA_VALUE. + */ +enum nft_data_types { + NFT_DATA_VALUE, + NFT_DATA_VERDICT = 0xffffff00U, +}; + +#define NFT_DATA_RESERVED_MASK 0xffffff00U + +/** + * enum nft_data_attributes - nf_tables data netlink attributes + * + * @NFTA_DATA_VALUE: generic data (NLA_BINARY) + * @NFTA_DATA_VERDICT: nf_tables verdict (NLA_NESTED: nft_verdict_attributes) + */ +enum nft_data_attributes { + NFTA_DATA_UNSPEC, + NFTA_DATA_VALUE, + NFTA_DATA_VERDICT, + __NFTA_DATA_MAX +}; +#define NFTA_DATA_MAX (__NFTA_DATA_MAX - 1) + +/** + * enum nft_verdict_attributes - nf_tables verdict netlink attributes + * + * @NFTA_VERDICT_CODE: nf_tables verdict (NLA_U32: enum nft_verdicts) + * @NFTA_VERDICT_CHAIN: jump target chain name (NLA_STRING) + */ +enum nft_verdict_attributes { + NFTA_VERDICT_UNSPEC, + NFTA_VERDICT_CODE, + NFTA_VERDICT_CHAIN, + __NFTA_VERDICT_MAX +}; +#define NFTA_VERDICT_MAX (__NFTA_VERDICT_MAX - 1) + +/** + * enum nft_expr_attributes - nf_tables expression netlink attributes + * + * @NFTA_EXPR_NAME: name of the expression type (NLA_STRING) + * @NFTA_EXPR_DATA: type specific data (NLA_NESTED) + */ +enum nft_expr_attributes { + NFTA_EXPR_UNSPEC, + NFTA_EXPR_NAME, + NFTA_EXPR_DATA, + __NFTA_EXPR_MAX +}; +#define NFTA_EXPR_MAX (__NFTA_EXPR_MAX - 1) + +/** + * enum nft_immediate_attributes - nf_tables immediate expression netlink attributes + * + * @NFTA_IMMEDIATE_DREG: destination register to load data into (NLA_U32) + * @NFTA_IMMEDIATE_DATA: data to load (NLA_NESTED: nft_data_attributes) + */ +enum nft_immediate_attributes { + NFTA_IMMEDIATE_UNSPEC, + NFTA_IMMEDIATE_DREG, + NFTA_IMMEDIATE_DATA, + __NFTA_IMMEDIATE_MAX +}; +#define NFTA_IMMEDIATE_MAX (__NFTA_IMMEDIATE_MAX - 1) + +/** + * enum nft_bitwise_attributes - nf_tables bitwise expression netlink attributes + * + * @NFTA_BITWISE_SREG: source register (NLA_U32: nft_registers) + * @NFTA_BITWISE_DREG: destination register (NLA_U32: nft_registers) + * @NFTA_BITWISE_LEN: length of operands (NLA_U32) + * @NFTA_BITWISE_MASK: mask value (NLA_NESTED: nft_data_attributes) + * @NFTA_BITWISE_XOR: xor value (NLA_NESTED: nft_data_attributes) + * + * The bitwise expression performs the following operation: + * + * dreg = (sreg & mask) ^ xor + * + * which allow to express all bitwise operations: + * + * mask xor + * NOT: 1 1 + * OR: 0 x + * XOR: 1 x + * AND: x 0 + */ +enum nft_bitwise_attributes { + NFTA_BITWISE_UNSPEC, + NFTA_BITWISE_SREG, + NFTA_BITWISE_DREG, + NFTA_BITWISE_LEN, + NFTA_BITWISE_MASK, + NFTA_BITWISE_XOR, + __NFTA_BITWISE_MAX +}; +#define NFTA_BITWISE_MAX (__NFTA_BITWISE_MAX - 1) + +/** + * enum nft_byteorder_ops - nf_tables byteorder operators + * + * @NFT_BYTEORDER_NTOH: network to host operator + * @NFT_BYTEORDER_HTON: host to network opertaor + */ +enum nft_byteorder_ops { + NFT_BYTEORDER_NTOH, + NFT_BYTEORDER_HTON, +}; + +/** + * enum nft_byteorder_attributes - nf_tables byteorder expression netlink attributes + * + * @NFTA_BYTEORDER_SREG: source register (NLA_U32: nft_registers) + * @NFTA_BYTEORDER_DREG: destination register (NLA_U32: nft_registers) + * @NFTA_BYTEORDER_OP: operator (NLA_U32: enum nft_byteorder_ops) + * @NFTA_BYTEORDER_LEN: length of the data (NLA_U32) + * @NFTA_BYTEORDER_SIZE: data size in bytes (NLA_U32: 2 or 4) + */ +enum nft_byteorder_attributes { + NFTA_BYTEORDER_UNSPEC, + NFTA_BYTEORDER_SREG, + NFTA_BYTEORDER_DREG, + NFTA_BYTEORDER_OP, + NFTA_BYTEORDER_LEN, + NFTA_BYTEORDER_SIZE, + __NFTA_BYTEORDER_MAX +}; +#define NFTA_BYTEORDER_MAX (__NFTA_BYTEORDER_MAX - 1) + +/** + * enum nft_cmp_ops - nf_tables relational operator + * + * @NFT_CMP_EQ: equal + * @NFT_CMP_NEQ: not equal + * @NFT_CMP_LT: less than + * @NFT_CMP_LTE: less than or equal to + * @NFT_CMP_GT: greater than + * @NFT_CMP_GTE: greater than or equal to + */ +enum nft_cmp_ops { + NFT_CMP_EQ, + NFT_CMP_NEQ, + NFT_CMP_LT, + NFT_CMP_LTE, + NFT_CMP_GT, + NFT_CMP_GTE, +}; + +/** + * enum nft_cmp_attributes - nf_tables cmp expression netlink attributes + * + * @NFTA_CMP_SREG: source register of data to compare (NLA_U32: nft_registers) + * @NFTA_CMP_OP: cmp operation (NLA_U32: nft_cmp_ops) + * @NFTA_CMP_DATA: data to compare against (NLA_NESTED: nft_data_attributes) + */ +enum nft_cmp_attributes { + NFTA_CMP_UNSPEC, + NFTA_CMP_SREG, + NFTA_CMP_OP, + NFTA_CMP_DATA, + __NFTA_CMP_MAX +}; +#define NFTA_CMP_MAX (__NFTA_CMP_MAX - 1) + +/** + * enum nft_lookup_attributes - nf_tables set lookup expression netlink attributes + * + * @NFTA_LOOKUP_SET: name of the set where to look for (NLA_STRING) + * @NFTA_LOOKUP_SREG: source register of the data to look for (NLA_U32: nft_registers) + * @NFTA_LOOKUP_DREG: destination register (NLA_U32: nft_registers) + * @NFTA_LOOKUP_SET_ID: uniquely identifies a set in a transaction (NLA_U32) + */ +enum nft_lookup_attributes { + NFTA_LOOKUP_UNSPEC, + NFTA_LOOKUP_SET, + NFTA_LOOKUP_SREG, + NFTA_LOOKUP_DREG, + NFTA_LOOKUP_SET_ID, + __NFTA_LOOKUP_MAX +}; +#define NFTA_LOOKUP_MAX (__NFTA_LOOKUP_MAX - 1) + +/** + * enum nft_payload_bases - nf_tables payload expression offset bases + * + * @NFT_PAYLOAD_LL_HEADER: link layer header + * @NFT_PAYLOAD_NETWORK_HEADER: network header + * @NFT_PAYLOAD_TRANSPORT_HEADER: transport header + */ +enum nft_payload_bases { + NFT_PAYLOAD_LL_HEADER, + NFT_PAYLOAD_NETWORK_HEADER, + NFT_PAYLOAD_TRANSPORT_HEADER, +}; + +/** + * enum nft_payload_attributes - nf_tables payload expression netlink attributes + * + * @NFTA_PAYLOAD_DREG: destination register to load data into (NLA_U32: nft_registers) + * @NFTA_PAYLOAD_BASE: payload base (NLA_U32: nft_payload_bases) + * @NFTA_PAYLOAD_OFFSET: payload offset relative to base (NLA_U32) + * @NFTA_PAYLOAD_LEN: payload length (NLA_U32) + */ +enum nft_payload_attributes { + NFTA_PAYLOAD_UNSPEC, + NFTA_PAYLOAD_DREG, + NFTA_PAYLOAD_BASE, + NFTA_PAYLOAD_OFFSET, + NFTA_PAYLOAD_LEN, + __NFTA_PAYLOAD_MAX +}; +#define NFTA_PAYLOAD_MAX (__NFTA_PAYLOAD_MAX - 1) + +/** + * enum nft_exthdr_attributes - nf_tables IPv6 extension header expression netlink attributes + * + * @NFTA_EXTHDR_DREG: destination register (NLA_U32: nft_registers) + * @NFTA_EXTHDR_TYPE: extension header type (NLA_U8) + * @NFTA_EXTHDR_OFFSET: extension header offset (NLA_U32) + * @NFTA_EXTHDR_LEN: extension header length (NLA_U32) + */ +enum nft_exthdr_attributes { + NFTA_EXTHDR_UNSPEC, + NFTA_EXTHDR_DREG, + NFTA_EXTHDR_TYPE, + NFTA_EXTHDR_OFFSET, + NFTA_EXTHDR_LEN, + __NFTA_EXTHDR_MAX +}; +#define NFTA_EXTHDR_MAX (__NFTA_EXTHDR_MAX - 1) + +/** + * enum nft_meta_keys - nf_tables meta expression keys + * + * @NFT_META_LEN: packet length (skb->len) + * @NFT_META_PROTOCOL: packet ethertype protocol (skb->protocol), invalid in OUTPUT + * @NFT_META_PRIORITY: packet priority (skb->priority) + * @NFT_META_MARK: packet mark (skb->mark) + * @NFT_META_IIF: packet input interface index (dev->ifindex) + * @NFT_META_OIF: packet output interface index (dev->ifindex) + * @NFT_META_IIFNAME: packet input interface name (dev->name) + * @NFT_META_OIFNAME: packet output interface name (dev->name) + * @NFT_META_IIFTYPE: packet input interface type (dev->type) + * @NFT_META_OIFTYPE: packet output interface type (dev->type) + * @NFT_META_SKUID: originating socket UID (fsuid) + * @NFT_META_SKGID: originating socket GID (fsgid) + * @NFT_META_NFTRACE: packet nftrace bit + * @NFT_META_RTCLASSID: realm value of packet's route (skb->dst->tclassid) + * @NFT_META_SECMARK: packet secmark (skb->secmark) + * @NFT_META_NFPROTO: netfilter protocol + * @NFT_META_L4PROTO: layer 4 protocol number + * @NFT_META_BRI_IIFNAME: packet input bridge interface name + * @NFT_META_BRI_OIFNAME: packet output bridge interface name + */ +enum nft_meta_keys { + NFT_META_LEN, + NFT_META_PROTOCOL, + NFT_META_PRIORITY, + NFT_META_MARK, + NFT_META_IIF, + NFT_META_OIF, + NFT_META_IIFNAME, + NFT_META_OIFNAME, + NFT_META_IIFTYPE, + NFT_META_OIFTYPE, + NFT_META_SKUID, + NFT_META_SKGID, + NFT_META_NFTRACE, + NFT_META_RTCLASSID, + NFT_META_SECMARK, + NFT_META_NFPROTO, + NFT_META_L4PROTO, + NFT_META_BRI_IIFNAME, + NFT_META_BRI_OIFNAME, +}; + +/** + * enum nft_meta_attributes - nf_tables meta expression netlink attributes + * + * @NFTA_META_DREG: destination register (NLA_U32) + * @NFTA_META_KEY: meta data item to load (NLA_U32: nft_meta_keys) + * @NFTA_META_SREG: source register (NLA_U32) + */ +enum nft_meta_attributes { + NFTA_META_UNSPEC, + NFTA_META_DREG, + NFTA_META_KEY, + NFTA_META_SREG, + __NFTA_META_MAX +}; +#define NFTA_META_MAX (__NFTA_META_MAX - 1) + +/** + * enum nft_ct_keys - nf_tables ct expression keys + * + * @NFT_CT_STATE: conntrack state (bitmask of enum ip_conntrack_info) + * @NFT_CT_DIRECTION: conntrack direction (enum ip_conntrack_dir) + * @NFT_CT_STATUS: conntrack status (bitmask of enum ip_conntrack_status) + * @NFT_CT_MARK: conntrack mark value + * @NFT_CT_SECMARK: conntrack secmark value + * @NFT_CT_EXPIRATION: relative conntrack expiration time in ms + * @NFT_CT_HELPER: connection tracking helper assigned to conntrack + * @NFT_CT_L3PROTOCOL: conntrack layer 3 protocol + * @NFT_CT_SRC: conntrack layer 3 protocol source (IPv4/IPv6 address) + * @NFT_CT_DST: conntrack layer 3 protocol destination (IPv4/IPv6 address) + * @NFT_CT_PROTOCOL: conntrack layer 4 protocol + * @NFT_CT_PROTO_SRC: conntrack layer 4 protocol source + * @NFT_CT_PROTO_DST: conntrack layer 4 protocol destination + */ +enum nft_ct_keys { + NFT_CT_STATE, + NFT_CT_DIRECTION, + NFT_CT_STATUS, + NFT_CT_MARK, + NFT_CT_SECMARK, + NFT_CT_EXPIRATION, + NFT_CT_HELPER, + NFT_CT_L3PROTOCOL, + NFT_CT_SRC, + NFT_CT_DST, + NFT_CT_PROTOCOL, + NFT_CT_PROTO_SRC, + NFT_CT_PROTO_DST, + NFT_CT_LABELS, +}; + +/** + * enum nft_ct_attributes - nf_tables ct expression netlink attributes + * + * @NFTA_CT_DREG: destination register (NLA_U32) + * @NFTA_CT_KEY: conntrack data item to load (NLA_U32: nft_ct_keys) + * @NFTA_CT_DIRECTION: direction in case of directional keys (NLA_U8) + * @NFTA_CT_SREG: source register (NLA_U32) + */ +enum nft_ct_attributes { + NFTA_CT_UNSPEC, + NFTA_CT_DREG, + NFTA_CT_KEY, + NFTA_CT_DIRECTION, + NFTA_CT_SREG, + __NFTA_CT_MAX +}; +#define NFTA_CT_MAX (__NFTA_CT_MAX - 1) + +/** + * enum nft_limit_attributes - nf_tables limit expression netlink attributes + * + * @NFTA_LIMIT_RATE: refill rate (NLA_U64) + * @NFTA_LIMIT_UNIT: refill unit (NLA_U64) + */ +enum nft_limit_attributes { + NFTA_LIMIT_UNSPEC, + NFTA_LIMIT_RATE, + NFTA_LIMIT_UNIT, + __NFTA_LIMIT_MAX +}; +#define NFTA_LIMIT_MAX (__NFTA_LIMIT_MAX - 1) + +/** + * enum nft_counter_attributes - nf_tables counter expression netlink attributes + * + * @NFTA_COUNTER_BYTES: number of bytes (NLA_U64) + * @NFTA_COUNTER_PACKETS: number of packets (NLA_U64) + */ +enum nft_counter_attributes { + NFTA_COUNTER_UNSPEC, + NFTA_COUNTER_BYTES, + NFTA_COUNTER_PACKETS, + __NFTA_COUNTER_MAX +}; +#define NFTA_COUNTER_MAX (__NFTA_COUNTER_MAX - 1) + +/** + * enum nft_log_attributes - nf_tables log expression netlink attributes + * + * @NFTA_LOG_GROUP: netlink group to send messages to (NLA_U32) + * @NFTA_LOG_PREFIX: prefix to prepend to log messages (NLA_STRING) + * @NFTA_LOG_SNAPLEN: length of payload to include in netlink message (NLA_U32) + * @NFTA_LOG_QTHRESHOLD: queue threshold (NLA_U32) + */ +enum nft_log_attributes { + NFTA_LOG_UNSPEC, + NFTA_LOG_GROUP, + NFTA_LOG_PREFIX, + NFTA_LOG_SNAPLEN, + NFTA_LOG_QTHRESHOLD, + __NFTA_LOG_MAX +}; +#define NFTA_LOG_MAX (__NFTA_LOG_MAX - 1) + +/** + * enum nft_queue_attributes - nf_tables queue expression netlink attributes + * + * @NFTA_QUEUE_NUM: netlink queue to send messages to (NLA_U16) + * @NFTA_QUEUE_TOTAL: number of queues to load balance packets on (NLA_U16) + * @NFTA_QUEUE_FLAGS: various flags (NLA_U16) + */ +enum nft_queue_attributes { + NFTA_QUEUE_UNSPEC, + NFTA_QUEUE_NUM, + NFTA_QUEUE_TOTAL, + NFTA_QUEUE_FLAGS, + __NFTA_QUEUE_MAX +}; +#define NFTA_QUEUE_MAX (__NFTA_QUEUE_MAX - 1) + +#define NFT_QUEUE_FLAG_BYPASS 0x01 /* for compatibility with v2 */ +#define NFT_QUEUE_FLAG_CPU_FANOUT 0x02 /* use current CPU (no hashing) */ +#define NFT_QUEUE_FLAG_MASK 0x03 + +/** + * enum nft_reject_types - nf_tables reject expression reject types + * + * @NFT_REJECT_ICMP_UNREACH: reject using ICMP unreachable + * @NFT_REJECT_TCP_RST: reject using TCP RST + */ +enum nft_reject_types { + NFT_REJECT_ICMP_UNREACH, + NFT_REJECT_TCP_RST, +}; + +/** + * enum nft_reject_attributes - nf_tables reject expression netlink attributes + * + * @NFTA_REJECT_TYPE: packet type to use (NLA_U32: nft_reject_types) + * @NFTA_REJECT_ICMP_CODE: ICMP code to use (NLA_U8) + */ +enum nft_reject_attributes { + NFTA_REJECT_UNSPEC, + NFTA_REJECT_TYPE, + NFTA_REJECT_ICMP_CODE, + __NFTA_REJECT_MAX +}; +#define NFTA_REJECT_MAX (__NFTA_REJECT_MAX - 1) + +/** + * enum nft_nat_types - nf_tables nat expression NAT types + * + * @NFT_NAT_SNAT: source NAT + * @NFT_NAT_DNAT: destination NAT + */ +enum nft_nat_types { + NFT_NAT_SNAT, + NFT_NAT_DNAT, +}; + +/** + * enum nft_nat_attributes - nf_tables nat expression netlink attributes + * + * @NFTA_NAT_TYPE: NAT type (NLA_U32: nft_nat_types) + * @NFTA_NAT_FAMILY: NAT family (NLA_U32) + * @NFTA_NAT_REG_ADDR_MIN: source register of address range start (NLA_U32: nft_registers) + * @NFTA_NAT_REG_ADDR_MAX: source register of address range end (NLA_U32: nft_registers) + * @NFTA_NAT_REG_PROTO_MIN: source register of proto range start (NLA_U32: nft_registers) + * @NFTA_NAT_REG_PROTO_MAX: source register of proto range end (NLA_U32: nft_registers) + */ +enum nft_nat_attributes { + NFTA_NAT_UNSPEC, + NFTA_NAT_TYPE, + NFTA_NAT_FAMILY, + NFTA_NAT_REG_ADDR_MIN, + NFTA_NAT_REG_ADDR_MAX, + NFTA_NAT_REG_PROTO_MIN, + NFTA_NAT_REG_PROTO_MAX, + __NFTA_NAT_MAX +}; +#define NFTA_NAT_MAX (__NFTA_NAT_MAX - 1) + +#endif /* _LINUX_NF_TABLES_H */ diff --git a/include/uapi/linux/netfilter/nf_tables_compat.h b/include/uapi/linux/netfilter/nf_tables_compat.h new file mode 100644 index 00000000000..8310f5f7655 --- /dev/null +++ b/include/uapi/linux/netfilter/nf_tables_compat.h @@ -0,0 +1,38 @@ +#ifndef _NFT_COMPAT_NFNETLINK_H_ +#define _NFT_COMPAT_NFNETLINK_H_ + +enum nft_target_attributes { + NFTA_TARGET_UNSPEC, + NFTA_TARGET_NAME, + NFTA_TARGET_REV, + NFTA_TARGET_INFO, + __NFTA_TARGET_MAX +}; +#define NFTA_TARGET_MAX (__NFTA_TARGET_MAX - 1) + +enum nft_match_attributes { + NFTA_MATCH_UNSPEC, + NFTA_MATCH_NAME, + NFTA_MATCH_REV, + NFTA_MATCH_INFO, + __NFTA_MATCH_MAX +}; +#define NFTA_MATCH_MAX (__NFTA_MATCH_MAX - 1) + +#define NFT_COMPAT_NAME_MAX 32 + +enum { + NFNL_MSG_COMPAT_GET, + NFNL_MSG_COMPAT_MAX +}; + +enum { + NFTA_COMPAT_UNSPEC = 0, + NFTA_COMPAT_NAME, + NFTA_COMPAT_REV, + NFTA_COMPAT_TYPE, + __NFTA_COMPAT_MAX, +}; +#define NFTA_COMPAT_MAX (__NFTA_COMPAT_MAX - 1) + +#endif diff --git a/include/uapi/linux/netfilter/nfnetlink.h b/include/uapi/linux/netfilter/nfnetlink.h index 4a4efafad5f..354a7e5e50f 100644 --- a/include/uapi/linux/netfilter/nfnetlink.h +++ b/include/uapi/linux/netfilter/nfnetlink.h @@ -18,6 +18,10 @@ enum nfnetlink_groups { #define NFNLGRP_CONNTRACK_EXP_UPDATE NFNLGRP_CONNTRACK_EXP_UPDATE NFNLGRP_CONNTRACK_EXP_DESTROY, #define NFNLGRP_CONNTRACK_EXP_DESTROY NFNLGRP_CONNTRACK_EXP_DESTROY + NFNLGRP_NFTABLES, +#define NFNLGRP_NFTABLES NFNLGRP_NFTABLES + NFNLGRP_ACCT_QUOTA, +#define NFNLGRP_ACCT_QUOTA NFNLGRP_ACCT_QUOTA __NFNLGRP_MAX, }; #define NFNLGRP_MAX (__NFNLGRP_MAX - 1) @@ -51,6 +55,12 @@ struct nfgenmsg { #define NFNL_SUBSYS_ACCT 7 #define NFNL_SUBSYS_CTNETLINK_TIMEOUT 8 #define NFNL_SUBSYS_CTHELPER 9 -#define NFNL_SUBSYS_COUNT 10 +#define NFNL_SUBSYS_NFTABLES 10 +#define NFNL_SUBSYS_NFT_COMPAT 11 +#define NFNL_SUBSYS_COUNT 12 + +/* Reserved control nfnetlink messages */ +#define NFNL_MSG_BATCH_BEGIN NLMSG_MIN_TYPE +#define NFNL_MSG_BATCH_END NLMSG_MIN_TYPE+1 #endif /* _UAPI_NFNETLINK_H */ diff --git a/include/uapi/linux/netfilter/nfnetlink_acct.h b/include/uapi/linux/netfilter/nfnetlink_acct.h index c7b6269e760..51404ec1902 100644 --- a/include/uapi/linux/netfilter/nfnetlink_acct.h +++ b/include/uapi/linux/netfilter/nfnetlink_acct.h @@ -10,15 +10,24 @@ enum nfnl_acct_msg_types { NFNL_MSG_ACCT_GET, NFNL_MSG_ACCT_GET_CTRZERO, NFNL_MSG_ACCT_DEL, + NFNL_MSG_ACCT_OVERQUOTA, NFNL_MSG_ACCT_MAX }; +enum nfnl_acct_flags { + NFACCT_F_QUOTA_PKTS = (1 << 0), + NFACCT_F_QUOTA_BYTES = (1 << 1), + NFACCT_F_OVERQUOTA = (1 << 2), /* can't be set from userspace */ +}; + enum nfnl_acct_type { NFACCT_UNSPEC, NFACCT_NAME, NFACCT_PKTS, NFACCT_BYTES, NFACCT_USE, + NFACCT_FLAGS, + NFACCT_QUOTA, __NFACCT_MAX }; #define NFACCT_MAX (__NFACCT_MAX - 1) diff --git a/include/uapi/linux/netfilter/nfnetlink_conntrack.h b/include/uapi/linux/netfilter/nfnetlink_conntrack.h index 86e930cf3df..acad6c52a65 100644 --- a/include/uapi/linux/netfilter/nfnetlink_conntrack.h +++ b/include/uapi/linux/netfilter/nfnetlink_conntrack.h @@ -42,13 +42,17 @@ enum ctattr_type { CTA_ID, CTA_NAT_DST, CTA_TUPLE_MASTER, - CTA_NAT_SEQ_ADJ_ORIG, - CTA_NAT_SEQ_ADJ_REPLY, + CTA_SEQ_ADJ_ORIG, + CTA_NAT_SEQ_ADJ_ORIG = CTA_SEQ_ADJ_ORIG, + CTA_SEQ_ADJ_REPLY, + CTA_NAT_SEQ_ADJ_REPLY = CTA_SEQ_ADJ_REPLY, CTA_SECMARK, /* obsolete */ CTA_ZONE, CTA_SECCTX, CTA_TIMESTAMP, CTA_MARK_MASK, + CTA_LABELS, + CTA_LABELS_MASK, __CTA_MAX }; #define CTA_MAX (__CTA_MAX - 1) @@ -163,6 +167,15 @@ enum ctattr_protonat { }; #define CTA_PROTONAT_MAX (__CTA_PROTONAT_MAX - 1) +enum ctattr_seqadj { + CTA_SEQADJ_UNSPEC, + CTA_SEQADJ_CORRECTION_POS, + CTA_SEQADJ_OFFSET_BEFORE, + CTA_SEQADJ_OFFSET_AFTER, + __CTA_SEQADJ_MAX +}; +#define CTA_SEQADJ_MAX (__CTA_SEQADJ_MAX - 1) + enum ctattr_natseq { CTA_NAT_SEQ_UNSPEC, CTA_NAT_SEQ_CORRECTION_POS, diff --git a/include/uapi/linux/netfilter/nfnetlink_cttimeout.h b/include/uapi/linux/netfilter/nfnetlink_cttimeout.h index a2810a7c5e3..1ab0b97b3a1 100644 --- a/include/uapi/linux/netfilter/nfnetlink_cttimeout.h +++ b/include/uapi/linux/netfilter/nfnetlink_cttimeout.h @@ -6,6 +6,8 @@ enum ctnl_timeout_msg_types { IPCTNL_MSG_TIMEOUT_NEW, IPCTNL_MSG_TIMEOUT_GET, IPCTNL_MSG_TIMEOUT_DELETE, + IPCTNL_MSG_TIMEOUT_DEFAULT_SET, + IPCTNL_MSG_TIMEOUT_DEFAULT_GET, IPCTNL_MSG_TIMEOUT_MAX }; diff --git a/include/uapi/linux/netfilter/nfnetlink_queue.h b/include/uapi/linux/netfilter/nfnetlink_queue.h index 70ec8c2bc11..8dd819e2b5f 100644 --- a/include/uapi/linux/netfilter/nfnetlink_queue.h +++ b/include/uapi/linux/netfilter/nfnetlink_queue.h @@ -45,6 +45,10 @@ enum nfqnl_attr_type { NFQA_CT, /* nf_conntrack_netlink.h */ NFQA_CT_INFO, /* enum ip_conntrack_info */ NFQA_CAP_LEN, /* __u32 length of captured packet */ + NFQA_SKB_INFO, /* __u32 skb meta information */ + NFQA_EXP, /* nf_conntrack_netlink.h */ + NFQA_UID, /* __u32 sk uid */ + NFQA_GID, /* __u32 sk gid */ __NFQA_MAX }; @@ -96,6 +100,16 @@ enum nfqnl_attr_config { /* Flags for NFQA_CFG_FLAGS */ #define NFQA_CFG_F_FAIL_OPEN (1 << 0) #define NFQA_CFG_F_CONNTRACK (1 << 1) -#define NFQA_CFG_F_MAX (1 << 2) +#define NFQA_CFG_F_GSO (1 << 2) +#define NFQA_CFG_F_UID_GID (1 << 3) +#define NFQA_CFG_F_MAX (1 << 4) + +/* flags for NFQA_SKB_INFO */ +/* packet appears to have wrong checksums, but they are ok */ +#define NFQA_SKB_CSUMNOTREADY (1 << 0) +/* packet is GSO (i.e., exceeds device mtu) */ +#define NFQA_SKB_GSO (1 << 1) +/* csum not validated (incoming device doesn't support hw checksum, etc.) */ +#define NFQA_SKB_CSUM_NOTVERIFIED (1 << 2) #endif /* _NFNETLINK_QUEUE_H */ diff --git a/include/uapi/linux/netfilter/xt_CT.h b/include/uapi/linux/netfilter/xt_CT.h index a064b8af360..5a688c1ca4d 100644 --- a/include/uapi/linux/netfilter/xt_CT.h +++ b/include/uapi/linux/netfilter/xt_CT.h @@ -3,7 +3,11 @@ #include <linux/types.h> -#define XT_CT_NOTRACK 0x1 +enum { + XT_CT_NOTRACK = 1 << 0, + XT_CT_NOTRACK_ALIAS = 1 << 1, + XT_CT_MASK = XT_CT_NOTRACK | XT_CT_NOTRACK_ALIAS, +}; struct xt_ct_target_info { __u16 flags; diff --git a/include/uapi/linux/netfilter/xt_HMARK.h b/include/uapi/linux/netfilter/xt_HMARK.h new file mode 100644 index 00000000000..826fc580757 --- /dev/null +++ b/include/uapi/linux/netfilter/xt_HMARK.h @@ -0,0 +1,50 @@ +#ifndef XT_HMARK_H_ +#define XT_HMARK_H_ + +#include <linux/types.h> + +enum { + XT_HMARK_SADDR_MASK, + XT_HMARK_DADDR_MASK, + XT_HMARK_SPI, + XT_HMARK_SPI_MASK, + XT_HMARK_SPORT, + XT_HMARK_DPORT, + XT_HMARK_SPORT_MASK, + XT_HMARK_DPORT_MASK, + XT_HMARK_PROTO_MASK, + XT_HMARK_RND, + XT_HMARK_MODULUS, + XT_HMARK_OFFSET, + XT_HMARK_CT, + XT_HMARK_METHOD_L3, + XT_HMARK_METHOD_L3_4, +}; +#define XT_HMARK_FLAG(flag) (1 << flag) + +union hmark_ports { + struct { + __u16 src; + __u16 dst; + } p16; + struct { + __be16 src; + __be16 dst; + } b16; + __u32 v32; + __be32 b32; +}; + +struct xt_hmark_info { + union nf_inet_addr src_mask; + union nf_inet_addr dst_mask; + union hmark_ports port_mask; + union hmark_ports port_set; + __u32 flags; + __u16 proto_mask; + __u32 hashrnd; + __u32 hmodulus; + __u32 hoffset; /* Mark offset to start from */ +}; + +#endif /* XT_HMARK_H_ */ diff --git a/include/uapi/linux/netfilter/xt_NFQUEUE.h b/include/uapi/linux/netfilter/xt_NFQUEUE.h index 9eafdbbb401..8bb5fe657d3 100644 --- a/include/uapi/linux/netfilter/xt_NFQUEUE.h +++ b/include/uapi/linux/netfilter/xt_NFQUEUE.h @@ -26,4 +26,13 @@ struct xt_NFQ_info_v2 { __u16 bypass; }; +struct xt_NFQ_info_v3 { + __u16 queuenum; + __u16 queues_total; + __u16 flags; +#define NFQ_FLAG_BYPASS 0x01 /* for compatibility with v2 */ +#define NFQ_FLAG_CPU_FANOUT 0x02 /* use current CPU (no hashing) */ +#define NFQ_FLAG_MASK 0x03 +}; + #endif /* _XT_NFQ_TARGET_H */ diff --git a/include/uapi/linux/netfilter/xt_SYNPROXY.h b/include/uapi/linux/netfilter/xt_SYNPROXY.h new file mode 100644 index 00000000000..2d59fbaa93c --- /dev/null +++ b/include/uapi/linux/netfilter/xt_SYNPROXY.h @@ -0,0 +1,16 @@ +#ifndef _XT_SYNPROXY_H +#define _XT_SYNPROXY_H + +#define XT_SYNPROXY_OPT_MSS 0x01 +#define XT_SYNPROXY_OPT_WSCALE 0x02 +#define XT_SYNPROXY_OPT_SACK_PERM 0x04 +#define XT_SYNPROXY_OPT_TIMESTAMP 0x08 +#define XT_SYNPROXY_OPT_ECN 0x10 + +struct xt_synproxy_info { + __u8 options; + __u8 wscale; + __u16 mss; +}; + +#endif /* _XT_SYNPROXY_H */ diff --git a/include/uapi/linux/netfilter/xt_bpf.h b/include/uapi/linux/netfilter/xt_bpf.h new file mode 100644 index 00000000000..5dda450eb55 --- /dev/null +++ b/include/uapi/linux/netfilter/xt_bpf.h @@ -0,0 +1,17 @@ +#ifndef _XT_BPF_H +#define _XT_BPF_H + +#include <linux/filter.h> +#include <linux/types.h> + +#define XT_BPF_MAX_NUM_INSTR 64 + +struct xt_bpf_info { + __u16 bpf_program_num_elem; + struct sock_filter bpf_program[XT_BPF_MAX_NUM_INSTR]; + + /* only used in the kernel */ + struct sk_filter *filter __attribute__((aligned(8))); +}; + +#endif /*_XT_BPF_H */ diff --git a/include/uapi/linux/netfilter/xt_cgroup.h b/include/uapi/linux/netfilter/xt_cgroup.h new file mode 100644 index 00000000000..43acb7e175f --- /dev/null +++ b/include/uapi/linux/netfilter/xt_cgroup.h @@ -0,0 +1,11 @@ +#ifndef _UAPI_XT_CGROUP_H +#define _UAPI_XT_CGROUP_H + +#include <linux/types.h> + +struct xt_cgroup_info { + __u32 id; + __u32 invert; +}; + +#endif /* _UAPI_XT_CGROUP_H */ diff --git a/include/uapi/linux/netfilter/xt_connlabel.h b/include/uapi/linux/netfilter/xt_connlabel.h new file mode 100644 index 00000000000..c4bc9ee9b33 --- /dev/null +++ b/include/uapi/linux/netfilter/xt_connlabel.h @@ -0,0 +1,12 @@ +#include <linux/types.h> + +#define XT_CONNLABEL_MAXBIT 127 +enum xt_connlabel_mtopts { + XT_CONNLABEL_OP_INVERT = 1 << 0, + XT_CONNLABEL_OP_SET = 1 << 1, +}; + +struct xt_connlabel_mtinfo { + __u16 bit; + __u16 options; +}; diff --git a/include/uapi/linux/netfilter/xt_conntrack.h b/include/uapi/linux/netfilter/xt_conntrack.h index e3c041d5402..e5bd3083a84 100644 --- a/include/uapi/linux/netfilter/xt_conntrack.h +++ b/include/uapi/linux/netfilter/xt_conntrack.h @@ -31,6 +31,7 @@ enum { XT_CONNTRACK_REPLSRC_PORT = 1 << 10, XT_CONNTRACK_REPLDST_PORT = 1 << 11, XT_CONNTRACK_DIRECTION = 1 << 12, + XT_CONNTRACK_STATE_ALIAS = 1 << 13, }; struct xt_conntrack_mtinfo1 { diff --git a/include/uapi/linux/netfilter/xt_ipcomp.h b/include/uapi/linux/netfilter/xt_ipcomp.h new file mode 100644 index 00000000000..45c7e40eb8e --- /dev/null +++ b/include/uapi/linux/netfilter/xt_ipcomp.h @@ -0,0 +1,16 @@ +#ifndef _XT_IPCOMP_H +#define _XT_IPCOMP_H + +#include <linux/types.h> + +struct xt_ipcomp { + __u32 spis[2]; /* Security Parameter Index */ + __u8 invflags; /* Inverse flags */ + __u8 hdrres; /* Test of the Reserved Filed */ +}; + +/* Values for "invflags" field in struct xt_ipcomp. */ +#define XT_IPCOMP_INV_SPI 0x01 /* Invert the sense of spi. */ +#define XT_IPCOMP_INV_MASK 0x01 /* All possible flags. */ + +#endif /*_XT_IPCOMP_H*/ diff --git a/include/uapi/linux/netfilter/xt_l2tp.h b/include/uapi/linux/netfilter/xt_l2tp.h new file mode 100644 index 00000000000..7dccfa0acbf --- /dev/null +++ b/include/uapi/linux/netfilter/xt_l2tp.h @@ -0,0 +1,27 @@ +#ifndef _LINUX_NETFILTER_XT_L2TP_H +#define _LINUX_NETFILTER_XT_L2TP_H + +#include <linux/types.h> + +enum xt_l2tp_type { + XT_L2TP_TYPE_CONTROL, + XT_L2TP_TYPE_DATA, +}; + +/* L2TP matching stuff */ +struct xt_l2tp_info { + __u32 tid; /* tunnel id */ + __u32 sid; /* session id */ + __u8 version; /* L2TP protocol version */ + __u8 type; /* L2TP packet type */ + __u8 flags; /* which fields to match */ +}; + +enum { + XT_L2TP_TID = (1 << 0), /* match L2TP tunnel id */ + XT_L2TP_SID = (1 << 1), /* match L2TP session id */ + XT_L2TP_VERSION = (1 << 2), /* match L2TP protocol version */ + XT_L2TP_TYPE = (1 << 3), /* match L2TP packet type */ +}; + +#endif /* _LINUX_NETFILTER_XT_L2TP_H */ diff --git a/include/uapi/linux/netfilter/xt_osf.h b/include/uapi/linux/netfilter/xt_osf.h index 18afa495f97..5d66caeba3e 100644 --- a/include/uapi/linux/netfilter/xt_osf.h +++ b/include/uapi/linux/netfilter/xt_osf.h @@ -13,8 +13,7 @@ * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * along with this program; if not, see <http://www.gnu.org/licenses/>. */ #ifndef _XT_OSF_H diff --git a/include/uapi/linux/netfilter/xt_rpfilter.h b/include/uapi/linux/netfilter/xt_rpfilter.h new file mode 100644 index 00000000000..8358d4f7195 --- /dev/null +++ b/include/uapi/linux/netfilter/xt_rpfilter.h @@ -0,0 +1,23 @@ +#ifndef _XT_RPATH_H +#define _XT_RPATH_H + +#include <linux/types.h> + +enum { + XT_RPFILTER_LOOSE = 1 << 0, + XT_RPFILTER_VALID_MARK = 1 << 1, + XT_RPFILTER_ACCEPT_LOCAL = 1 << 2, + XT_RPFILTER_INVERT = 1 << 3, +#ifdef __KERNEL__ + XT_RPFILTER_OPTION_MASK = XT_RPFILTER_LOOSE | + XT_RPFILTER_VALID_MARK | + XT_RPFILTER_ACCEPT_LOCAL | + XT_RPFILTER_INVERT, +#endif +}; + +struct xt_rpfilter_info { + __u8 flags; +}; + +#endif diff --git a/include/uapi/linux/netfilter/xt_set.h b/include/uapi/linux/netfilter/xt_set.h index e3a9978f259..964d3d42f87 100644 --- a/include/uapi/linux/netfilter/xt_set.h +++ b/include/uapi/linux/netfilter/xt_set.h @@ -62,4 +62,13 @@ struct xt_set_info_target_v2 { __u32 timeout; }; +/* Revision 3 match */ + +struct xt_set_info_match_v3 { + struct xt_set_info match_set; + struct ip_set_counter_match packets; + struct ip_set_counter_match bytes; + __u32 flags; +}; + #endif /*_XT_SET_H*/ diff --git a/include/uapi/linux/netfilter/xt_socket.h b/include/uapi/linux/netfilter/xt_socket.h index 26d7217bd4f..6315e2ac347 100644 --- a/include/uapi/linux/netfilter/xt_socket.h +++ b/include/uapi/linux/netfilter/xt_socket.h @@ -5,10 +5,17 @@ enum { XT_SOCKET_TRANSPARENT = 1 << 0, + XT_SOCKET_NOWILDCARD = 1 << 1, }; struct xt_socket_mtinfo1 { __u8 flags; }; +#define XT_SOCKET_FLAGS_V1 XT_SOCKET_TRANSPARENT + +struct xt_socket_mtinfo2 { + __u8 flags; +}; +#define XT_SOCKET_FLAGS_V2 (XT_SOCKET_TRANSPARENT | XT_SOCKET_NOWILDCARD) #endif /* _XT_SOCKET_H */ diff --git a/include/uapi/linux/netfilter_bridge/ebt_802_3.h b/include/uapi/linux/netfilter_bridge/ebt_802_3.h index 5bf84912a08..f37522aade2 100644 --- a/include/uapi/linux/netfilter_bridge/ebt_802_3.h +++ b/include/uapi/linux/netfilter_bridge/ebt_802_3.h @@ -2,6 +2,7 @@ #define _UAPI__LINUX_BRIDGE_EBT_802_3_H #include <linux/types.h> +#include <linux/if_ether.h> #define EBT_802_3_SAP 0x01 #define EBT_802_3_TYPE 0x02 @@ -42,8 +43,8 @@ struct hdr_ni { }; struct ebt_802_3_hdr { - __u8 daddr[6]; - __u8 saddr[6]; + __u8 daddr[ETH_ALEN]; + __u8 saddr[ETH_ALEN]; __be16 len; union { struct hdr_ui ui; diff --git a/include/uapi/linux/netfilter_ipv4/ipt_CLUSTERIP.h b/include/uapi/linux/netfilter_ipv4/ipt_CLUSTERIP.h index c6a204c9704..eac0f6548f4 100644 --- a/include/uapi/linux/netfilter_ipv4/ipt_CLUSTERIP.h +++ b/include/uapi/linux/netfilter_ipv4/ipt_CLUSTERIP.h @@ -2,6 +2,7 @@ #define _IPT_CLUSTERIP_H_target #include <linux/types.h> +#include <linux/if_ether.h> enum clusterip_hashmode { CLUSTERIP_HASHMODE_SIP = 0, @@ -22,7 +23,7 @@ struct ipt_clusterip_tgt_info { __u32 flags; /* only relevant for new ones */ - __u8 clustermac[6]; + __u8 clustermac[ETH_ALEN]; __u16 num_total_nodes; __u16 num_local_nodes; __u16 local_nodes[CLUSTERIP_MAX_NODES]; diff --git a/include/uapi/linux/netfilter_ipv6/ip6t_frag.h b/include/uapi/linux/netfilter_ipv6/ip6t_frag.h index b47f61b9e08..dfd8bc2268c 100644 --- a/include/uapi/linux/netfilter_ipv6/ip6t_frag.h +++ b/include/uapi/linux/netfilter_ipv6/ip6t_frag.h @@ -4,9 +4,9 @@ #include <linux/types.h> struct ip6t_frag { - __u32 ids[2]; /* Security Parameter Index */ + __u32 ids[2]; /* Identification range */ __u32 hdrlen; /* Header Length */ - __u8 flags; /* */ + __u8 flags; /* Flags */ __u8 invflags; /* Inverse flags */ }; diff --git a/include/uapi/linux/netlink.h b/include/uapi/linux/netlink.h index 78d5b8a546d..1a85940f8ab 100644 --- a/include/uapi/linux/netlink.h +++ b/include/uapi/linux/netlink.h @@ -1,6 +1,7 @@ #ifndef _UAPI__LINUX_NETLINK_H #define _UAPI__LINUX_NETLINK_H +#include <linux/kernel.h> #include <linux/socket.h> /* for __kernel_sa_family_t */ #include <linux/types.h> @@ -78,7 +79,7 @@ struct nlmsghdr { #define NLMSG_ALIGNTO 4U #define NLMSG_ALIGN(len) ( ((len)+NLMSG_ALIGNTO-1) & ~(NLMSG_ALIGNTO-1) ) #define NLMSG_HDRLEN ((int) NLMSG_ALIGN(sizeof(struct nlmsghdr))) -#define NLMSG_LENGTH(len) ((len)+NLMSG_ALIGN(NLMSG_HDRLEN)) +#define NLMSG_LENGTH(len) ((len) + NLMSG_HDRLEN) #define NLMSG_SPACE(len) NLMSG_ALIGN(NLMSG_LENGTH(len)) #define NLMSG_DATA(nlh) ((void*)(((char*)nlh) + NLMSG_LENGTH(0))) #define NLMSG_NEXT(nlh,len) ((len) -= NLMSG_ALIGN((nlh)->nlmsg_len), \ @@ -105,11 +106,42 @@ struct nlmsgerr { #define NETLINK_PKTINFO 3 #define NETLINK_BROADCAST_ERROR 4 #define NETLINK_NO_ENOBUFS 5 +#define NETLINK_RX_RING 6 +#define NETLINK_TX_RING 7 struct nl_pktinfo { __u32 group; }; +struct nl_mmap_req { + unsigned int nm_block_size; + unsigned int nm_block_nr; + unsigned int nm_frame_size; + unsigned int nm_frame_nr; +}; + +struct nl_mmap_hdr { + unsigned int nm_status; + unsigned int nm_len; + __u32 nm_group; + /* credentials */ + __u32 nm_pid; + __u32 nm_uid; + __u32 nm_gid; +}; + +enum nl_mmap_status { + NL_MMAP_STATUS_UNUSED, + NL_MMAP_STATUS_RESERVED, + NL_MMAP_STATUS_VALID, + NL_MMAP_STATUS_COPY, + NL_MMAP_STATUS_SKIP, +}; + +#define NL_MMAP_MSG_ALIGNMENT NLMSG_ALIGNTO +#define NL_MMAP_MSG_ALIGN(sz) __ALIGN_KERNEL(sz, NL_MMAP_MSG_ALIGNMENT) +#define NL_MMAP_HDRLEN NL_MMAP_MSG_ALIGN(sizeof(struct nl_mmap_hdr)) + #define NET_MAJOR 36 /* Major 36 is reserved for networking */ enum { diff --git a/include/uapi/linux/netlink_diag.h b/include/uapi/linux/netlink_diag.h new file mode 100644 index 00000000000..f2159d30d1f --- /dev/null +++ b/include/uapi/linux/netlink_diag.h @@ -0,0 +1,53 @@ +#ifndef __NETLINK_DIAG_H__ +#define __NETLINK_DIAG_H__ + +#include <linux/types.h> + +struct netlink_diag_req { + __u8 sdiag_family; + __u8 sdiag_protocol; + __u16 pad; + __u32 ndiag_ino; + __u32 ndiag_show; + __u32 ndiag_cookie[2]; +}; + +struct netlink_diag_msg { + __u8 ndiag_family; + __u8 ndiag_type; + __u8 ndiag_protocol; + __u8 ndiag_state; + + __u32 ndiag_portid; + __u32 ndiag_dst_portid; + __u32 ndiag_dst_group; + __u32 ndiag_ino; + __u32 ndiag_cookie[2]; +}; + +struct netlink_diag_ring { + __u32 ndr_block_size; + __u32 ndr_block_nr; + __u32 ndr_frame_size; + __u32 ndr_frame_nr; +}; + +enum { + /* NETLINK_DIAG_NONE, standard nl API requires this attribute! */ + NETLINK_DIAG_MEMINFO, + NETLINK_DIAG_GROUPS, + NETLINK_DIAG_RX_RING, + NETLINK_DIAG_TX_RING, + + __NETLINK_DIAG_MAX, +}; + +#define NETLINK_DIAG_MAX (__NETLINK_DIAG_MAX - 1) + +#define NDIAG_PROTO_ALL ((__u8) ~0) + +#define NDIAG_SHOW_MEMINFO 0x00000001 /* show memory info of a socket */ +#define NDIAG_SHOW_GROUPS 0x00000002 /* show groups of a netlink socket */ +#define NDIAG_SHOW_RING_CFG 0x00000004 /* show ring configuration */ + +#endif diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h index 0e63cee8d81..9b19b446192 100644 --- a/include/uapi/linux/nfc.h +++ b/include/uapi/linux/nfc.h @@ -5,20 +5,17 @@ * Lauro Ramos Venancio <lauro.venancio@openbossa.org> * Aloisio Almeida Jr <aloisio.almeida@openbossa.org> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #ifndef __LINUX_NFC_H @@ -67,6 +64,28 @@ * subsequent CONNECT and CC messages. * If one of the passed parameters is wrong none is set and -EINVAL is * returned. + * @NFC_CMD_ENABLE_SE: Enable the physical link to a specific secure element. + * Once enabled a secure element will handle card emulation mode, i.e. + * starting a poll from a device which has a secure element enabled means + * we want to do SE based card emulation. + * @NFC_CMD_DISABLE_SE: Disable the physical link to a specific secure element. + * @NFC_CMD_FW_DOWNLOAD: Request to Load/flash firmware, or event to inform + * that some firmware was loaded + * @NFC_EVENT_SE_ADDED: Event emitted when a new secure element is discovered. + * This typically will be sent whenever a new NFC controller with either + * an embedded SE or an UICC one connected to it through SWP. + * @NFC_EVENT_SE_REMOVED: Event emitted when a secure element is removed from + * the system, as a consequence of e.g. an NFC controller being unplugged. + * @NFC_EVENT_SE_CONNECTIVITY: This event is emitted whenever a secure element + * is requesting connectivity access. For example a UICC SE may need to + * talk with a sleeping modem and will notify this need by sending this + * event. It is then up to userspace to decide if it will wake the modem + * up or not. + * @NFC_EVENT_SE_TRANSACTION: This event is sent when an application running on + * a specific SE notifies us about the end of a transaction. The parameter + * for this event is the application ID (AID). + * @NFC_CMD_GET_SE: Dump all discovered secure elements from an NFC controller. + * @NFC_CMD_SE_IO: Send/Receive APDUs to/from the selected secure element. */ enum nfc_commands { NFC_CMD_UNSPEC, @@ -86,6 +105,17 @@ enum nfc_commands { NFC_EVENT_TM_DEACTIVATED, NFC_CMD_LLC_GET_PARAMS, NFC_CMD_LLC_SET_PARAMS, + NFC_CMD_ENABLE_SE, + NFC_CMD_DISABLE_SE, + NFC_CMD_LLC_SDREQ, + NFC_EVENT_LLC_SDRES, + NFC_CMD_FW_DOWNLOAD, + NFC_EVENT_SE_ADDED, + NFC_EVENT_SE_REMOVED, + NFC_EVENT_SE_CONNECTIVITY, + NFC_EVENT_SE_TRANSACTION, + NFC_CMD_GET_SE, + NFC_CMD_SE_IO, /* private: internal use only */ __NFC_CMD_AFTER_LAST }; @@ -114,6 +144,14 @@ enum nfc_commands { * @NFC_ATTR_LLC_PARAM_LTO: Link TimeOut parameter * @NFC_ATTR_LLC_PARAM_RW: Receive Window size parameter * @NFC_ATTR_LLC_PARAM_MIUX: MIU eXtension parameter + * @NFC_ATTR_SE: Available Secure Elements + * @NFC_ATTR_FIRMWARE_NAME: Free format firmware version + * @NFC_ATTR_SE_INDEX: Secure element index + * @NFC_ATTR_SE_TYPE: Secure element type (UICC or EMBEDDED) + * @NFC_ATTR_FIRMWARE_DOWNLOAD_STATUS: Firmware download operation status + * @NFC_ATTR_APDU: Secure element APDU + * @NFC_ATTR_TARGET_ISO15693_DSFID: ISO 15693 Data Storage Format Identifier + * @NFC_ATTR_TARGET_ISO15693_UID: ISO 15693 Unique Identifier */ enum nfc_attrs { NFC_ATTR_UNSPEC, @@ -134,16 +172,39 @@ enum nfc_attrs { NFC_ATTR_LLC_PARAM_LTO, NFC_ATTR_LLC_PARAM_RW, NFC_ATTR_LLC_PARAM_MIUX, + NFC_ATTR_SE, + NFC_ATTR_LLC_SDP, + NFC_ATTR_FIRMWARE_NAME, + NFC_ATTR_SE_INDEX, + NFC_ATTR_SE_TYPE, + NFC_ATTR_SE_AID, + NFC_ATTR_FIRMWARE_DOWNLOAD_STATUS, + NFC_ATTR_SE_APDU, + NFC_ATTR_TARGET_ISO15693_DSFID, + NFC_ATTR_TARGET_ISO15693_UID, /* private: internal use only */ __NFC_ATTR_AFTER_LAST }; #define NFC_ATTR_MAX (__NFC_ATTR_AFTER_LAST - 1) +enum nfc_sdp_attr { + NFC_SDP_ATTR_UNSPEC, + NFC_SDP_ATTR_URI, + NFC_SDP_ATTR_SAP, +/* private: internal use only */ + __NFC_SDP_ATTR_AFTER_LAST +}; +#define NFC_SDP_ATTR_MAX (__NFC_SDP_ATTR_AFTER_LAST - 1) + #define NFC_DEVICE_NAME_MAXSIZE 8 #define NFC_NFCID1_MAXSIZE 10 +#define NFC_NFCID2_MAXSIZE 8 +#define NFC_NFCID3_MAXSIZE 10 #define NFC_SENSB_RES_MAXSIZE 12 #define NFC_SENSF_RES_MAXSIZE 18 #define NFC_GB_MAXSIZE 48 +#define NFC_FIRMWARE_NAME_MAXSIZE 32 +#define NFC_ISO15693_UID_MAXSIZE 8 /* NFC protocols */ #define NFC_PROTO_JEWEL 1 @@ -152,8 +213,9 @@ enum nfc_attrs { #define NFC_PROTO_ISO14443 4 #define NFC_PROTO_NFC_DEP 5 #define NFC_PROTO_ISO14443_B 6 +#define NFC_PROTO_ISO15693 7 -#define NFC_PROTO_MAX 7 +#define NFC_PROTO_MAX 8 /* NFC communication modes */ #define NFC_COMM_ACTIVE 0 @@ -171,6 +233,14 @@ enum nfc_attrs { #define NFC_PROTO_ISO14443_MASK (1 << NFC_PROTO_ISO14443) #define NFC_PROTO_NFC_DEP_MASK (1 << NFC_PROTO_NFC_DEP) #define NFC_PROTO_ISO14443_B_MASK (1 << NFC_PROTO_ISO14443_B) +#define NFC_PROTO_ISO15693_MASK (1 << NFC_PROTO_ISO15693) + +/* NFC Secure Elements */ +#define NFC_SE_UICC 0x1 +#define NFC_SE_EMBEDDED 0x2 + +#define NFC_SE_DISABLED 0x0 +#define NFC_SE_ENABLED 0x1 struct sockaddr_nfc { sa_family_t sa_family; @@ -203,10 +273,25 @@ struct sockaddr_nfc_llcp { * First byte is the adapter index * Second byte contains flags * - 0x01 - Direction (0=RX, 1=TX) - * - 0x02-0x80 - Reserved + * - 0x02-0x04 - Payload type (000=LLCP, 001=NCI, 010=HCI, 011=Digital, + * 100=Proprietary) + * - 0x05-0x80 - Reserved **/ -#define NFC_LLCP_RAW_HEADER_SIZE 2 -#define NFC_LLCP_DIRECTION_RX 0x00 -#define NFC_LLCP_DIRECTION_TX 0x01 +#define NFC_RAW_HEADER_SIZE 2 +#define NFC_DIRECTION_RX 0x00 +#define NFC_DIRECTION_TX 0x01 + +#define RAW_PAYLOAD_LLCP 0 +#define RAW_PAYLOAD_NCI 1 +#define RAW_PAYLOAD_HCI 2 +#define RAW_PAYLOAD_DIGITAL 3 +#define RAW_PAYLOAD_PROPRIETARY 4 + +/* socket option names */ +#define NFC_LLCP_RW 0 +#define NFC_LLCP_MIUX 1 +#define NFC_LLCP_REMOTE_MIU 2 +#define NFC_LLCP_REMOTE_LTO 3 +#define NFC_LLCP_REMOTE_RW 4 #endif /*__LINUX_NFC_H */ diff --git a/include/uapi/linux/nfs4.h b/include/uapi/linux/nfs4.h index 788128ebac4..35f5f4c6c26 100644 --- a/include/uapi/linux/nfs4.h +++ b/include/uapi/linux/nfs4.h @@ -150,7 +150,7 @@ #define NFS4_SECINFO_STYLE4_CURRENT_FH 0 #define NFS4_SECINFO_STYLE4_PARENT 1 -#define NFS4_MAX_UINT64 (~(u64)0) +#define NFS4_MAX_UINT64 (~(__u64)0) /* An NFS4 sessions server must support at least NFS4_MAX_OPS operations. * If a compound requires more operations, adjust NFS4_MAX_OPS accordingly. diff --git a/include/uapi/linux/nfs_mount.h b/include/uapi/linux/nfs_mount.h index 576bddd72e0..64b0f22f5c4 100644 --- a/include/uapi/linux/nfs_mount.h +++ b/include/uapi/linux/nfs_mount.h @@ -60,7 +60,7 @@ struct nfs_mount_data { #define NFS_MOUNT_BROKEN_SUID 0x0400 /* 4 */ #define NFS_MOUNT_NOACL 0x0800 /* 4 */ #define NFS_MOUNT_STRICTLOCK 0x1000 /* reserved for NFSv4 */ -#define NFS_MOUNT_SECFLAVOUR 0x2000 /* 5 */ +#define NFS_MOUNT_SECFLAVOUR 0x2000 /* 5 non-text parsed mount data only */ #define NFS_MOUNT_NORDIRPLUS 0x4000 /* 5 */ #define NFS_MOUNT_UNSHARED 0x8000 /* 5 */ #define NFS_MOUNT_FLAGMASK 0xFFFF diff --git a/include/uapi/linux/nfsd/nfsfh.h b/include/uapi/linux/nfsd/nfsfh.h index 616e3b39647..20391235d08 100644 --- a/include/uapi/linux/nfsd/nfsfh.h +++ b/include/uapi/linux/nfsd/nfsfh.h @@ -1,13 +1,7 @@ /* - * include/linux/nfsd/nfsfh.h - * * This file describes the layout of the file handles as passed * over the wire. * - * Earlier versions of knfsd used to sign file handles using keyed MD5 - * or SHA. I've removed this code, because it doesn't give you more - * security than blocking external access to port 2049 on your firewall. - * * Copyright (C) 1995, 1996, 1997 Olaf Kirch <okir@monad.swb.de> */ @@ -37,7 +31,7 @@ struct nfs_fhbase_old { }; /* - * This is the new flexible, extensible style NFSv2/v3 file handle. + * This is the new flexible, extensible style NFSv2/v3/v4 file handle. * by Neil Brown <neilb@cse.unsw.edu.au> - March 2000 * * The file handle starts with a sequence of four-byte words. @@ -47,14 +41,7 @@ struct nfs_fhbase_old { * * All four-byte values are in host-byte-order. * - * The auth_type field specifies how the filehandle can be authenticated - * This might allow a file to be confirmed to be in a writable part of a - * filetree without checking the path from it up to the root. - * Current values: - * 0 - No authentication. fb_auth is 0 bytes long - * Possible future values: - * 1 - 4 bytes taken from MD5 hash of the remainer of the file handle - * prefixed by a secret and with the important export flags. + * The auth_type field is deprecated and must be set to 0. * * The fsid_type identifies how the filesystem (or export point) is * encoded. @@ -71,14 +58,9 @@ struct nfs_fhbase_old { * 7 - 8 byte inode number and 16 byte uuid * * The fileid_type identified how the file within the filesystem is encoded. - * This is (will be) passed to, and set by, the underlying filesystem if it supports - * filehandle operations. The filesystem must not use the value '0' or '0xff' and may - * only use the values 1 and 2 as defined below: - * Current values: - * 0 - The root, or export point, of the filesystem. fb_fileid is 0 bytes. - * 1 - 32bit inode number, 32 bit generation number. - * 2 - 32bit inode number, 32 bit generation number, 32 bit parent directory inode number. - * + * The values for this field are filesystem specific, exccept that + * filesystems must not use the values '0' or '0xff'. 'See enum fid_type' + * in include/linux/exportfs.h for currently registered values. */ struct nfs_fhbase_new { __u8 fb_version; /* == 1, even => nfs_fhbase_old */ @@ -114,9 +96,9 @@ struct knfsd_fh { #define fh_fsid_type fh_base.fh_new.fb_fsid_type #define fh_auth_type fh_base.fh_new.fb_auth_type #define fh_fileid_type fh_base.fh_new.fb_fileid_type -#define fh_auth fh_base.fh_new.fb_auth #define fh_fsid fh_base.fh_new.fb_auth - +/* Do not use, provided for userspace compatiblity. */ +#define fh_auth fh_base.fh_new.fb_auth #endif /* _UAPI_LINUX_NFSD_FH_H */ diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index e3e19f8b16f..be9519b52bb 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -27,6 +27,8 @@ #include <linux/types.h> +#define NL80211_GENL_NAME "nl80211" + /** * DOC: Station handling * @@ -36,7 +38,21 @@ * The station is still assumed to belong to the AP interface it was added * to. * - * TODO: need more info? + * Station handling varies per interface type and depending on the driver's + * capabilities. + * + * For drivers supporting TDLS with external setup (WIPHY_FLAG_SUPPORTS_TDLS + * and WIPHY_FLAG_TDLS_EXTERNAL_SETUP), the station lifetime is as follows: + * - a setup station entry is added, not yet authorized, without any rate + * or capability information, this just exists to avoid race conditions + * - when the TDLS setup is done, a single NL80211_CMD_SET_STATION is valid + * to add rate and capability information to the station and at the same + * time mark it authorized. + * - %NL80211_TDLS_ENABLE_LINK is then used + * - after this, the only valid operation is to remove it by tearing down + * the TDLS link (%NL80211_TDLS_DISABLE_LINK) + * + * TODO: need more info for other interface types */ /** @@ -110,6 +126,31 @@ */ /** + * DOC: packet coalesce support + * + * In most cases, host that receives IPv4 and IPv6 multicast/broadcast + * packets does not do anything with these packets. Therefore the + * reception of these unwanted packets causes unnecessary processing + * and power consumption. + * + * Packet coalesce feature helps to reduce number of received interrupts + * to host by buffering these packets in firmware/hardware for some + * predefined time. Received interrupt will be generated when one of the + * following events occur. + * a) Expiration of hardware timer whose expiration time is set to maximum + * coalescing delay of matching coalesce rule. + * b) Coalescing buffer in hardware reaches it's limit. + * c) Packet doesn't match any of the configured coalesce rules. + * + * User needs to configure following parameters for creating a coalesce + * rule. + * a) Maximum coalescing delay + * b) List of packet patterns which needs to be matched + * c) Condition for coalescence. pattern 'match' or 'no match' + * Multiple such rules can be created. + */ + +/** * enum nl80211_commands - supported nl80211 commands * * @NL80211_CMD_UNSPEC: unspecified command to catch errors @@ -170,7 +211,8 @@ * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, - * %NL80211_ATTR_AUTH_TYPE and %NL80211_ATTR_INACTIVITY_TIMEOUT. + * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT, + * %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS. * The channel to use can be set on the interface or be given using the * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width. * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP @@ -261,8 +303,9 @@ * passed, all channels allowed for the current regulatory domain * are used. Extra IEs can also be passed from the userspace by * using the %NL80211_ATTR_IE attribute. - * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT - * if scheduled scan is not running. + * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if + * scheduled scan is not running. The caller may assume that as soon + * as the call returns, it is safe to start a new scheduled scan again. * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan * results available. * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has @@ -374,10 +417,20 @@ * requests to connect to a specified network but without separating * auth and assoc steps. For this, you need to specify the SSID in a * %NL80211_ATTR_SSID attribute, and can optionally specify the association - * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC, - * %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, - * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and - * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT. + * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP, + * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, + * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, + * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, %NL80211_ATTR_MAC_HINT, and + * %NL80211_ATTR_WIPHY_FREQ_HINT. + * If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are + * restrictions on BSS selection, i.e., they effectively prevent roaming + * within the ESS. %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT + * can be included to provide a recommendation of the initial BSS while + * allowing the driver to roam to other BSSes within the ESS and also to + * ignore this recommendation if the indicated BSS is not ideal. Only one + * set of BSSID,frequency parameters is used (i.e., either the enforcing + * %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict + * %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT). * Background scan period can optionally be * specified in %NL80211_ATTR_BG_SCAN_PERIOD, * if not specified default background scan configuration @@ -450,6 +503,9 @@ * TX status event pertaining to the TX request. * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the * management frames at CCK rate or not in 2GHz band. + * %NL80211_ATTR_CSA_C_OFFSETS_TX is an array of offsets to CSA + * counters which will be updated to the current value. This attribute + * is used during CSA period. * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this * command may be used with the corresponding cookie to cancel the wait * time if it is known that it is no longer necessary. @@ -498,9 +554,11 @@ * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a * beacon or probe response from a compatible mesh peer. This is only * sent while no station information (sta_info) exists for the new peer - * candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH is set. On - * reception of this notification, userspace may decide to create a new - * station (@NL80211_CMD_NEW_STATION). To stop this notification from + * candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH, + * @NL80211_MESH_SETUP_USERSPACE_AMPE, or + * @NL80211_MESH_SETUP_USERSPACE_MPM is set. On reception of this + * notification, userspace may decide to create a new station + * (@NL80211_CMD_NEW_STATION). To stop this notification from * reoccurring, the userspace authentication daemon may want to create the * new station with the AUTHENTICATED flag unset and maybe change it later * depending on the authentication result. @@ -512,6 +570,12 @@ * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For * more background information, see * http://wireless.kernel.org/en/users/Documentation/WoWLAN. + * The @NL80211_CMD_SET_WOWLAN command can also be used as a notification + * from the driver reporting the wakeup reason. In this case, the + * @NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason + * for the wakeup, if it was caused by wireless. If it is not present + * in the wakeup notification, the wireless device didn't cause the + * wakeup but reports that it was woken up. * * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver * the necessary information for supporting GTK rekey offload. This @@ -531,7 +595,14 @@ * operation, %NL80211_ATTR_MAC contains the peer MAC address, and * %NL80211_ATTR_REASON_CODE the reason code to be used (only with * %NL80211_TDLS_TEARDOWN). - * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. + * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. The + * %NL80211_ATTR_TDLS_ACTION attribute determines the type of frame to be + * sent. Public Action codes (802.11-2012 8.1.5.1) will be sent as + * 802.11 management frames, while TDLS action codes (802.11-2012 + * 8.5.13.1) will be encapsulated and sent as data frames. The currently + * supported Public Action code is %WLAN_PUB_ACTION_TDLS_DISCOVER_RES + * and the currently supported TDLS actions codes are given in + * &enum ieee80211_tdls_actioncode. * * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP * (or GO) interface (i.e. hostapd) to ask for unexpected frames to @@ -586,6 +657,71 @@ * @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames * for IBSS or MESH vif. * + * @NL80211_CMD_SET_MAC_ACL: sets ACL for MAC address based access control. + * This is to be used with the drivers advertising the support of MAC + * address based access control. List of MAC addresses is passed in + * %NL80211_ATTR_MAC_ADDRS and ACL policy is passed in + * %NL80211_ATTR_ACL_POLICY. Driver will enable ACL with this list, if it + * is not already done. The new list will replace any existing list. Driver + * will clear its ACL when the list of MAC addresses passed is empty. This + * command is used in AP/P2P GO mode. Driver has to make sure to clear its + * ACL list during %NL80211_CMD_STOP_AP. + * + * @NL80211_CMD_RADAR_DETECT: Start a Channel availability check (CAC). Once + * a radar is detected or the channel availability scan (CAC) has finished + * or was aborted, or a radar was detected, usermode will be notified with + * this event. This command is also used to notify userspace about radars + * while operating on this channel. + * %NL80211_ATTR_RADAR_EVENT is used to inform about the type of the + * event. + * + * @NL80211_CMD_GET_PROTOCOL_FEATURES: Get global nl80211 protocol features, + * i.e. features for the nl80211 protocol rather than device features. + * Returns the features in the %NL80211_ATTR_PROTOCOL_FEATURES bitmap. + * + * @NL80211_CMD_UPDATE_FT_IES: Pass down the most up-to-date Fast Transition + * Information Element to the WLAN driver + * + * @NL80211_CMD_FT_EVENT: Send a Fast transition event from the WLAN driver + * to the supplicant. This will carry the target AP's MAC address along + * with the relevant Information Elements. This event is used to report + * received FT IEs (MDIE, FTIE, RSN IE, TIE, RICIE). + * + * @NL80211_CMD_CRIT_PROTOCOL_START: Indicates user-space will start running + * a critical protocol that needs more reliability in the connection to + * complete. + * + * @NL80211_CMD_CRIT_PROTOCOL_STOP: Indicates the connection reliability can + * return back to normal. + * + * @NL80211_CMD_GET_COALESCE: Get currently supported coalesce rules. + * @NL80211_CMD_SET_COALESCE: Configure coalesce rules or clear existing rules. + * + * @NL80211_CMD_CHANNEL_SWITCH: Perform a channel switch by announcing the + * the new channel information (Channel Switch Announcement - CSA) + * in the beacon for some time (as defined in the + * %NL80211_ATTR_CH_SWITCH_COUNT parameter) and then change to the + * new channel. Userspace provides the new channel information (using + * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel + * width). %NL80211_ATTR_CH_SWITCH_BLOCK_TX may be supplied to inform + * other station that transmission must be blocked until the channel + * switch is complete. + * + * @NL80211_CMD_VENDOR: Vendor-specified command/event. The command is specified + * by the %NL80211_ATTR_VENDOR_ID attribute and a sub-command in + * %NL80211_ATTR_VENDOR_SUBCMD. Parameter(s) can be transported in + * %NL80211_ATTR_VENDOR_DATA. + * For feature advertisement, the %NL80211_ATTR_VENDOR_DATA attribute is + * used in the wiphy data as a nested attribute containing descriptions + * (&struct nl80211_vendor_cmd_info) of the supported vendor commands. + * This may also be sent as an event with the same attributes. + * + * @NL80211_CMD_SET_QOS_MAP: Set Interworking QoS mapping for IP DSCP values. + * The QoS mapping information is included in %NL80211_ATTR_QOS_MAP. If + * that attribute is not included, QoS mapping is disabled. Since this + * QoS mapping is relevant for IP packets, it is only valid during an + * association. This is cleared on disassociation and AP restart. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -736,6 +872,27 @@ enum nl80211_commands { NL80211_CMD_SET_MCAST_RATE, + NL80211_CMD_SET_MAC_ACL, + + NL80211_CMD_RADAR_DETECT, + + NL80211_CMD_GET_PROTOCOL_FEATURES, + + NL80211_CMD_UPDATE_FT_IES, + NL80211_CMD_FT_EVENT, + + NL80211_CMD_CRIT_PROTOCOL_START, + NL80211_CMD_CRIT_PROTOCOL_STOP, + + NL80211_CMD_GET_COALESCE, + NL80211_CMD_SET_COALESCE, + + NL80211_CMD_CHANNEL_SWITCH, + + NL80211_CMD_VENDOR, + + NL80211_CMD_SET_QOS_MAP, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -855,7 +1012,8 @@ enum nl80211_commands { * consisting of a nested array. * * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes). - * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link. + * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link + * (see &enum nl80211_plink_action). * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path. * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path * info given for %NL80211_CMD_GET_MPATH, nested attribute described at @@ -870,7 +1028,7 @@ enum nl80211_commands { * to query the CRDA to retrieve one regulatory domain. This attribute can * also be used by userspace to query the kernel for the currently set * regulatory domain. We chose an alpha2 as that is also used by the - * IEEE-802.11d country information element to identify a country. + * IEEE-802.11 country information element to identify a country. * Users can also simply ask the wireless core to set regulatory domain * to a specific alpha2. * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory @@ -958,7 +1116,7 @@ enum nl80211_commands { * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is * used for the association (&enum nl80211_mfp, represented as a u32); * this attribute can be used - * with %NL80211_CMD_ASSOCIATE request + * with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests * * @NL80211_ATTR_STA_FLAGS2: Attribute containing a * &struct nl80211_sta_flag_update. @@ -1138,10 +1296,10 @@ enum nl80211_commands { * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver * allows auth frames in a mesh to be passed to userspace for processing via * the @NL80211_MESH_SETUP_USERSPACE_AUTH flag. - * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as - * defined in &enum nl80211_plink_state. Used when userspace is - * driving the peer link management state machine. - * @NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled. + * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as defined in + * &enum nl80211_plink_state. Used when userspace is driving the peer link + * management state machine. @NL80211_MESH_SETUP_USERSPACE_AMPE or + * @NL80211_MESH_SETUP_USERSPACE_MPM must be enabled. * * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy * capabilities, the supported WoWLAN triggers @@ -1310,6 +1468,129 @@ enum nl80211_commands { * if not given in START_AP 0 is assumed, if not given in SET_BSS * no change is made. * + * @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode + * defined in &enum nl80211_mesh_power_mode. + * + * @NL80211_ATTR_ACL_POLICY: ACL policy, see &enum nl80211_acl_policy, + * carried in a u32 attribute + * + * @NL80211_ATTR_MAC_ADDRS: Array of nested MAC addresses, used for + * MAC ACL. + * + * @NL80211_ATTR_MAC_ACL_MAX: u32 attribute to advertise the maximum + * number of MAC addresses that a device can support for MAC + * ACL. + * + * @NL80211_ATTR_RADAR_EVENT: Type of radar event for notification to userspace, + * contains a value of enum nl80211_radar_event (u32). + * + * @NL80211_ATTR_EXT_CAPA: 802.11 extended capabilities that the kernel driver + * has and handles. The format is the same as the IE contents. See + * 802.11-2012 8.4.2.29 for more information. + * @NL80211_ATTR_EXT_CAPA_MASK: Extended capabilities that the kernel driver + * has set in the %NL80211_ATTR_EXT_CAPA value, for multibit fields. + * + * @NL80211_ATTR_STA_CAPABILITY: Station capabilities (u16) are advertised to + * the driver, e.g., to enable TDLS power save (PU-APSD). + * + * @NL80211_ATTR_STA_EXT_CAPABILITY: Station extended capabilities are + * advertised to the driver, e.g., to enable TDLS off channel operations + * and PU-APSD. + * + * @NL80211_ATTR_PROTOCOL_FEATURES: global nl80211 feature flags, see + * &enum nl80211_protocol_features, the attribute is a u32. + * + * @NL80211_ATTR_SPLIT_WIPHY_DUMP: flag attribute, userspace supports + * receiving the data for a single wiphy split across multiple + * messages, given with wiphy dump message + * + * @NL80211_ATTR_MDID: Mobility Domain Identifier + * + * @NL80211_ATTR_IE_RIC: Resource Information Container Information + * Element + * + * @NL80211_ATTR_CRIT_PROT_ID: critical protocol identifier requiring increased + * reliability, see &enum nl80211_crit_proto_id (u16). + * @NL80211_ATTR_MAX_CRIT_PROT_DURATION: duration in milliseconds in which + * the connection should have increased reliability (u16). + * + * @NL80211_ATTR_PEER_AID: Association ID for the peer TDLS station (u16). + * This is similar to @NL80211_ATTR_STA_AID but with a difference of being + * allowed to be used with the first @NL80211_CMD_SET_STATION command to + * update a TDLS peer STA entry. + * + * @NL80211_ATTR_COALESCE_RULE: Coalesce rule information. + * + * @NL80211_ATTR_CH_SWITCH_COUNT: u32 attribute specifying the number of TBTT's + * until the channel switch event. + * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission + * must be blocked on the current channel (before the channel switch + * operation). + * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information + * for the time while performing a channel switch. + * @NL80211_ATTR_CSA_C_OFF_BEACON: An array of offsets (u16) to the channel + * switch counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL). + * @NL80211_ATTR_CSA_C_OFF_PRESP: An array of offsets (u16) to the channel + * switch counters in the probe response (%NL80211_ATTR_PROBE_RESP). + * + * @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32. + * As specified in the &enum nl80211_rxmgmt_flags. + * + * @NL80211_ATTR_STA_SUPPORTED_CHANNELS: array of supported channels. + * + * @NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES: array of supported + * supported operating classes. + * + * @NL80211_ATTR_HANDLE_DFS: A flag indicating whether user space + * controls DFS operation in IBSS mode. If the flag is included in + * %NL80211_CMD_JOIN_IBSS request, the driver will allow use of DFS + * channels and reports radar events to userspace. Userspace is required + * to react to radar events, e.g. initiate a channel switch or leave the + * IBSS network. + * + * @NL80211_ATTR_SUPPORT_5_MHZ: A flag indicating that the device supports + * 5 MHz channel bandwidth. + * @NL80211_ATTR_SUPPORT_10_MHZ: A flag indicating that the device supports + * 10 MHz channel bandwidth. + * + * @NL80211_ATTR_OPMODE_NOTIF: Operating mode field from Operating Mode + * Notification Element based on association request when used with + * %NL80211_CMD_NEW_STATION; u8 attribute. + * + * @NL80211_ATTR_VENDOR_ID: The vendor ID, either a 24-bit OUI or, if + * %NL80211_VENDOR_ID_IS_LINUX is set, a special Linux ID (not used yet) + * @NL80211_ATTR_VENDOR_SUBCMD: vendor sub-command + * @NL80211_ATTR_VENDOR_DATA: data for the vendor command, if any; this + * attribute is also used for vendor command feature advertisement + * @NL80211_ATTR_VENDOR_EVENTS: used for event list advertising in the wiphy + * info, containing a nested array of possible events + * + * @NL80211_ATTR_QOS_MAP: IP DSCP mapping for Interworking QoS mapping. This + * data is in the format defined for the payload of the QoS Map Set element + * in IEEE Std 802.11-2012, 8.4.2.97. + * + * @NL80211_ATTR_MAC_HINT: MAC address recommendation as initial BSS + * @NL80211_ATTR_WIPHY_FREQ_HINT: frequency of the recommended initial BSS + * + * @NL80211_ATTR_MAX_AP_ASSOC_STA: Device attribute that indicates how many + * associated stations are supported in AP mode (including P2P GO); u32. + * Since drivers may not have a fixed limit on the maximum number (e.g., + * other concurrent operations may affect this), drivers are allowed to + * advertise values that cannot always be met. In such cases, an attempt + * to add a new station entry with @NL80211_CMD_NEW_STATION may fail. + * + * @NL80211_ATTR_CSA_C_OFFSETS_TX: An array of csa counter offsets (u16) which + * should be updated when the frame is transmitted. + * @NL80211_ATTR_MAX_CSA_COUNTERS: U8 attribute used to advertise the maximum + * supported number of csa counters. + * + * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32. + * As specified in the &enum nl80211_tdls_peer_capability. + * + * @NL80211_ATTR_IFACE_SOCKET_OWNER: flag attribute, if set during interface + * creation then the new interface will be owned by the netlink socket + * that created it and will be destroyed when the socket is closed + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1580,6 +1861,76 @@ enum nl80211_attrs { NL80211_ATTR_P2P_CTWINDOW, NL80211_ATTR_P2P_OPPPS, + NL80211_ATTR_LOCAL_MESH_POWER_MODE, + + NL80211_ATTR_ACL_POLICY, + + NL80211_ATTR_MAC_ADDRS, + + NL80211_ATTR_MAC_ACL_MAX, + + NL80211_ATTR_RADAR_EVENT, + + NL80211_ATTR_EXT_CAPA, + NL80211_ATTR_EXT_CAPA_MASK, + + NL80211_ATTR_STA_CAPABILITY, + NL80211_ATTR_STA_EXT_CAPABILITY, + + NL80211_ATTR_PROTOCOL_FEATURES, + NL80211_ATTR_SPLIT_WIPHY_DUMP, + + NL80211_ATTR_DISABLE_VHT, + NL80211_ATTR_VHT_CAPABILITY_MASK, + + NL80211_ATTR_MDID, + NL80211_ATTR_IE_RIC, + + NL80211_ATTR_CRIT_PROT_ID, + NL80211_ATTR_MAX_CRIT_PROT_DURATION, + + NL80211_ATTR_PEER_AID, + + NL80211_ATTR_COALESCE_RULE, + + NL80211_ATTR_CH_SWITCH_COUNT, + NL80211_ATTR_CH_SWITCH_BLOCK_TX, + NL80211_ATTR_CSA_IES, + NL80211_ATTR_CSA_C_OFF_BEACON, + NL80211_ATTR_CSA_C_OFF_PRESP, + + NL80211_ATTR_RXMGMT_FLAGS, + + NL80211_ATTR_STA_SUPPORTED_CHANNELS, + + NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES, + + NL80211_ATTR_HANDLE_DFS, + + NL80211_ATTR_SUPPORT_5_MHZ, + NL80211_ATTR_SUPPORT_10_MHZ, + + NL80211_ATTR_OPMODE_NOTIF, + + NL80211_ATTR_VENDOR_ID, + NL80211_ATTR_VENDOR_SUBCMD, + NL80211_ATTR_VENDOR_DATA, + NL80211_ATTR_VENDOR_EVENTS, + + NL80211_ATTR_QOS_MAP, + + NL80211_ATTR_MAC_HINT, + NL80211_ATTR_WIPHY_FREQ_HINT, + + NL80211_ATTR_MAX_AP_ASSOC_STA, + + NL80211_ATTR_TDLS_PEER_CAPABILITY, + + NL80211_ATTR_IFACE_SOCKET_OWNER, + + NL80211_ATTR_CSA_C_OFFSETS_TX, + NL80211_ATTR_MAX_CSA_COUNTERS, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -1697,6 +2048,9 @@ enum nl80211_iftype { * flag can't be changed, it is only valid while adding a station, and * attempts to change it will silently be ignored (rather than rejected * as errors.) + * @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers + * that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a + * previously added station into associated state * @NL80211_STA_FLAG_MAX: highest station flag number currently defined * @__NL80211_STA_FLAG_AFTER_LAST: internal use */ @@ -1708,6 +2062,7 @@ enum nl80211_sta_flags { NL80211_STA_FLAG_MFP, NL80211_STA_FLAG_AUTHENTICATED, NL80211_STA_FLAG_TDLS_PEER, + NL80211_STA_FLAG_ASSOCIATED, /* keep last */ __NL80211_STA_FLAG_AFTER_LAST, @@ -1813,6 +2168,8 @@ enum nl80211_sta_bss_param { * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs) * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station) * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station) + * @NL80211_STA_INFO_RX_BYTES64: total received bytes (u64, from this station) + * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (u64, to this station) * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute * containing info as possible, see &enum nl80211_rate_info @@ -1834,6 +2191,16 @@ enum nl80211_sta_bss_param { * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update. * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32) * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64) + * @NL80211_STA_INFO_LOCAL_PM: local mesh STA link-specific power mode + * @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode + * @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards + * non-peer STA + * @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU + * Contains a nested array of signal strength attributes (u8, dBm) + * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average + * Same format as NL80211_STA_INFO_CHAIN_SIGNAL. + * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the + * 802.11 header (u32, kbps) * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -1858,6 +2225,14 @@ enum nl80211_sta_info { NL80211_STA_INFO_STA_FLAGS, NL80211_STA_INFO_BEACON_LOSS, NL80211_STA_INFO_T_OFFSET, + NL80211_STA_INFO_LOCAL_PM, + NL80211_STA_INFO_PEER_PM, + NL80211_STA_INFO_NONPEER_PM, + NL80211_STA_INFO_RX_BYTES64, + NL80211_STA_INFO_TX_BYTES64, + NL80211_STA_INFO_CHAIN_SIGNAL, + NL80211_STA_INFO_CHAIN_SIGNAL_AVG, + NL80211_STA_INFO_EXPECTED_THROUGHPUT, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, @@ -1959,26 +2334,76 @@ enum nl80211_band_attr { * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current * regulatory domain. - * @NL80211_FREQUENCY_ATTR_PASSIVE_SCAN: Only passive scanning is - * permitted on this channel in current regulatory domain. - * @NL80211_FREQUENCY_ATTR_NO_IBSS: IBSS networks are not permitted - * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_NO_IR: no mechanisms that initiate radiation + * are permitted on this channel, this includes sending probe + * requests, or modes of operation that require beaconing. * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory * on this channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm * (100 * dBm). + * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS + * (enum nl80211_dfs_state) + * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long + * this channel is in this DFS state. + * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this + * channel as the control channel + * @NL80211_FREQUENCY_ATTR_NO_HT40_PLUS: HT40+ isn't possible with this + * channel as the control channel + * @NL80211_FREQUENCY_ATTR_NO_80MHZ: any 80 MHz channel using this channel + * as the primary or any of the secondary channels isn't possible, + * this includes 80+80 channels + * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel + * using this channel as the primary or any of the secondary channels + * isn't possible + * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. + * @NL80211_FREQUENCY_ATTR_INDOOR_ONLY: Only indoor use is permitted on this + * channel. A channel that has the INDOOR_ONLY attribute can only be + * used when there is a clear assessment that the device is operating in + * an indoor surroundings, i.e., it is connected to AC power (and not + * through portable DC inverters) or is under the control of a master + * that is acting as an AP and is connected to AC power. + * @NL80211_FREQUENCY_ATTR_GO_CONCURRENT: GO operation is allowed on this + * channel if it's connected concurrently to a BSS on the same channel on + * the 2 GHz band or to a channel in the same UNII band (on the 5 GHz + * band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO on a + * channel that has the GO_CONCURRENT attribute set can be done when there + * is a clear assessment that the device is operating under the guidance of + * an authorized master, i.e., setting up a GO while the device is also + * connected to an AP with DFS and radar detection on the UNII band (it is + * up to user-space, i.e., wpa_supplicant to perform the required + * verifications) + * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed + * on this channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use + * + * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122 + * for more information on the FCC description of the relaxations allowed + * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and + * NL80211_FREQUENCY_ATTR_GO_CONCURRENT. */ enum nl80211_frequency_attr { __NL80211_FREQUENCY_ATTR_INVALID, NL80211_FREQUENCY_ATTR_FREQ, NL80211_FREQUENCY_ATTR_DISABLED, - NL80211_FREQUENCY_ATTR_PASSIVE_SCAN, - NL80211_FREQUENCY_ATTR_NO_IBSS, + NL80211_FREQUENCY_ATTR_NO_IR, + __NL80211_FREQUENCY_ATTR_NO_IBSS, NL80211_FREQUENCY_ATTR_RADAR, NL80211_FREQUENCY_ATTR_MAX_TX_POWER, + NL80211_FREQUENCY_ATTR_DFS_STATE, + NL80211_FREQUENCY_ATTR_DFS_TIME, + NL80211_FREQUENCY_ATTR_NO_HT40_MINUS, + NL80211_FREQUENCY_ATTR_NO_HT40_PLUS, + NL80211_FREQUENCY_ATTR_NO_80MHZ, + NL80211_FREQUENCY_ATTR_NO_160MHZ, + NL80211_FREQUENCY_ATTR_DFS_CAC_TIME, + NL80211_FREQUENCY_ATTR_INDOOR_ONLY, + NL80211_FREQUENCY_ATTR_GO_CONCURRENT, + NL80211_FREQUENCY_ATTR_NO_20MHZ, + NL80211_FREQUENCY_ATTR_NO_10MHZ, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -1986,6 +2411,9 @@ enum nl80211_frequency_attr { }; #define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER +#define NL80211_FREQUENCY_ATTR_PASSIVE_SCAN NL80211_FREQUENCY_ATTR_NO_IR +#define NL80211_FREQUENCY_ATTR_NO_IBSS NL80211_FREQUENCY_ATTR_NO_IR +#define NL80211_FREQUENCY_ATTR_NO_IR NL80211_FREQUENCY_ATTR_NO_IR /** * enum nl80211_bitrate_attr - bitrate attributes @@ -2066,12 +2494,14 @@ enum nl80211_reg_type { * in KHz. This is not a center a frequency but an actual regulatory * band edge. * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this - * frequency range, in KHz. + * frequency range, in KHz. * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain * for a given frequency range. The value is in mBi (100 * dBi). * If you don't have one then don't send this. * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for * a given frequency range. The value is in mBm (100 * dBm). + * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. + * If not present or 0 default CAC time will be used. * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number * currently defined * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use @@ -2087,6 +2517,8 @@ enum nl80211_reg_rule_attr { NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN, NL80211_ATTR_POWER_RULE_MAX_EIRP, + NL80211_ATTR_DFS_CAC_TIME, + /* keep last */ __NL80211_REG_RULE_ATTR_AFTER_LAST, NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1 @@ -2096,9 +2528,15 @@ enum nl80211_reg_rule_attr { * enum nl80211_sched_scan_match_attr - scheduled scan match attributes * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching, - * only report BSS with matching SSID. + * only report BSS with matching SSID. * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a - * BSS in scan results. Filtering is turned off if not specified. + * BSS in scan results. Filtering is turned off if not specified. Note that + * if this attribute is in a match set of its own, then it is treated as + * the default value for all matchsets with an SSID, rather than being a + * matchset of its own without an RSSI filter. This is due to problems with + * how this API was implemented in the past. Also, due to the same problem, + * the only way to create a matchset with only an RSSI filter (with this + * attribute) is if there's only a single matchset with the RSSI attribute. * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter * attribute number currently defined * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use @@ -2128,8 +2566,12 @@ enum nl80211_sched_scan_match_attr { * @NL80211_RRF_DFS: DFS support is required to be used * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links - * @NL80211_RRF_PASSIVE_SCAN: passive scan is required - * @NL80211_RRF_NO_IBSS: no IBSS is allowed + * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed, + * this includes probe requests or modes of operation that require + * beaconing. + * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated + * base on contiguous rules and wider channels will be allowed to cross + * multiple contiguous/overlapping frequency ranges. */ enum nl80211_reg_rule_flags { NL80211_RRF_NO_OFDM = 1<<0, @@ -2139,10 +2581,18 @@ enum nl80211_reg_rule_flags { NL80211_RRF_DFS = 1<<4, NL80211_RRF_PTP_ONLY = 1<<5, NL80211_RRF_PTMP_ONLY = 1<<6, - NL80211_RRF_PASSIVE_SCAN = 1<<7, - NL80211_RRF_NO_IBSS = 1<<8, + NL80211_RRF_NO_IR = 1<<7, + __NL80211_RRF_NO_IBSS = 1<<8, + NL80211_RRF_AUTO_BW = 1<<11, }; +#define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR +#define NL80211_RRF_NO_IBSS NL80211_RRF_NO_IR +#define NL80211_RRF_NO_IR NL80211_RRF_NO_IR + +/* For backport compatibility with older userspace */ +#define NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS) + /** * enum nl80211_dfs_regions - regulatory DFS regions * @@ -2172,10 +2622,13 @@ enum nl80211_dfs_regions { * present has been registered with the wireless core that * has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a * supported feature. + * @NL80211_USER_REG_HINT_INDOOR: a user sent an hint indicating that the + * platform is operating in an indoor environment. */ enum nl80211_user_reg_hint_type { NL80211_USER_REG_HINT_USER = 0, NL80211_USER_REG_HINT_CELL_BASE = 1, + NL80211_USER_REG_HINT_INDOOR = 2, }; /** @@ -2231,6 +2684,8 @@ enum nl80211_survey_info { * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing. * overrides all other flags. + * @NL80211_MNTR_FLAG_ACTIVE: use the configured MAC address + * and ACK incoming unicast packets. * * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag @@ -2242,6 +2697,7 @@ enum nl80211_mntr_flags { NL80211_MNTR_FLAG_CONTROL, NL80211_MNTR_FLAG_OTHER_BSS, NL80211_MNTR_FLAG_COOK_FRAMES, + NL80211_MNTR_FLAG_ACTIVE, /* keep last */ __NL80211_MNTR_FLAG_AFTER_LAST, @@ -2249,6 +2705,34 @@ enum nl80211_mntr_flags { }; /** + * enum nl80211_mesh_power_mode - mesh power save modes + * + * @NL80211_MESH_POWER_UNKNOWN: The mesh power mode of the mesh STA is + * not known or has not been set yet. + * @NL80211_MESH_POWER_ACTIVE: Active mesh power mode. The mesh STA is + * in Awake state all the time. + * @NL80211_MESH_POWER_LIGHT_SLEEP: Light sleep mode. The mesh STA will + * alternate between Active and Doze states, but will wake up for + * neighbor's beacons. + * @NL80211_MESH_POWER_DEEP_SLEEP: Deep sleep mode. The mesh STA will + * alternate between Active and Doze states, but may not wake up + * for neighbor's beacons. + * + * @__NL80211_MESH_POWER_AFTER_LAST - internal use + * @NL80211_MESH_POWER_MAX - highest possible power save level + */ + +enum nl80211_mesh_power_mode { + NL80211_MESH_POWER_UNKNOWN, + NL80211_MESH_POWER_ACTIVE, + NL80211_MESH_POWER_LIGHT_SLEEP, + NL80211_MESH_POWER_DEEP_SLEEP, + + __NL80211_MESH_POWER_AFTER_LAST, + NL80211_MESH_POWER_MAX = __NL80211_MESH_POWER_AFTER_LAST - 1 +}; + +/** * enum nl80211_meshconf_params - mesh configuration parameters * * Mesh configuration parameters. These can be changed while the mesh is @@ -2275,8 +2759,10 @@ enum nl80211_mntr_flags { * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh * point. * - * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically - * open peer links when we detect compatible mesh peers. + * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically open + * peer links when we detect compatible mesh peers. Disabled if + * @NL80211_MESH_SETUP_USERSPACE_MPM or @NL80211_MESH_SETUP_USERSPACE_AMPE are + * set. * * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames * containing a PREQ that an MP can send to a particular destination (path @@ -2342,6 +2828,15 @@ enum nl80211_mntr_flags { * (in TUs) during which a mesh STA can send only one Action frame * containing a PREQ element for root path confirmation. * + * @NL80211_MESHCONF_POWER_MODE: Default mesh power mode for new peer links. + * type &enum nl80211_mesh_power_mode (u32) + * + * @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs) + * + * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've + * established peering with for longer than this time (in seconds), then + * remove it from the STA's list of peers. Default is 30 minutes. + * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use */ enum nl80211_meshconf_params { @@ -2371,6 +2866,9 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, NL80211_MESHCONF_HWMP_ROOT_INTERVAL, NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, + NL80211_MESHCONF_POWER_MODE, + NL80211_MESHCONF_AWAKE_WINDOW, + NL80211_MESHCONF_PLINK_TIMEOUT, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, @@ -2415,6 +2913,13 @@ enum nl80211_meshconf_params { * vendor specific synchronization method or disable it to use the default * neighbor offset synchronization * + * @NL80211_MESH_SETUP_USERSPACE_MPM: Enable this option if userspace will + * implement an MPM which handles peer allocation and state. + * + * @NL80211_MESH_SETUP_AUTH_PROTOCOL: Inform the kernel of the authentication + * method (u8, as defined in IEEE 8.4.2.100.6, e.g. 0x1 for SAE). + * Default is no authentication method required. + * * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number * * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use @@ -2427,6 +2932,8 @@ enum nl80211_mesh_setup_params { NL80211_MESH_SETUP_USERSPACE_AUTH, NL80211_MESH_SETUP_USERSPACE_AMPE, NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC, + NL80211_MESH_SETUP_USERSPACE_MPM, + NL80211_MESH_SETUP_AUTH_PROTOCOL, /* keep last */ __NL80211_MESH_SETUP_ATTR_AFTER_LAST, @@ -2507,6 +3014,8 @@ enum nl80211_channel_type { * and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well * @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 * attribute must be provided as well + * @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel + * @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel */ enum nl80211_chan_width { NL80211_CHAN_WIDTH_20_NOHT, @@ -2515,6 +3024,23 @@ enum nl80211_chan_width { NL80211_CHAN_WIDTH_80, NL80211_CHAN_WIDTH_80P80, NL80211_CHAN_WIDTH_160, + NL80211_CHAN_WIDTH_5, + NL80211_CHAN_WIDTH_10, +}; + +/** + * enum nl80211_bss_scan_width - control channel width for a BSS + * + * These values are used with the %NL80211_BSS_CHAN_WIDTH attribute. + * + * @NL80211_BSS_CHAN_WIDTH_20: control channel is 20 MHz wide or compatible + * @NL80211_BSS_CHAN_WIDTH_10: control channel is 10 MHz wide + * @NL80211_BSS_CHAN_WIDTH_5: control channel is 5 MHz wide + */ +enum nl80211_bss_scan_width { + NL80211_BSS_CHAN_WIDTH_20, + NL80211_BSS_CHAN_WIDTH_10, + NL80211_BSS_CHAN_WIDTH_5, }; /** @@ -2541,6 +3067,8 @@ enum nl80211_chan_width { * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information * elements from a Beacon frame (bin); not present if no Beacon frame has * yet been received + * @NL80211_BSS_CHAN_WIDTH: channel width of the control channel + * (u32, enum nl80211_bss_scan_width) * @__NL80211_BSS_AFTER_LAST: internal * @NL80211_BSS_MAX: highest BSS attribute */ @@ -2557,6 +3085,7 @@ enum nl80211_bss { NL80211_BSS_STATUS, NL80211_BSS_SEEN_MS_AGO, NL80211_BSS_BEACON_IES, + NL80211_BSS_CHAN_WIDTH, /* keep last */ __NL80211_BSS_AFTER_LAST, @@ -2697,21 +3226,43 @@ enum nl80211_key_attributes { * in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with * 1 = 500 kbps) but without the IE length restriction (at most * %NL80211_MAX_SUPP_RATES in a single array). - * @NL80211_TXRATE_MCS: HT (MCS) rates allowed for TX rate selection + * @NL80211_TXRATE_HT: HT (MCS) rates allowed for TX rate selection * in an array of MCS numbers. + * @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection, + * see &struct nl80211_txrate_vht + * @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi * @__NL80211_TXRATE_AFTER_LAST: internal * @NL80211_TXRATE_MAX: highest TX rate attribute */ enum nl80211_tx_rate_attributes { __NL80211_TXRATE_INVALID, NL80211_TXRATE_LEGACY, - NL80211_TXRATE_MCS, + NL80211_TXRATE_HT, + NL80211_TXRATE_VHT, + NL80211_TXRATE_GI, /* keep last */ __NL80211_TXRATE_AFTER_LAST, NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1 }; +#define NL80211_TXRATE_MCS NL80211_TXRATE_HT +#define NL80211_VHT_NSS_MAX 8 + +/** + * struct nl80211_txrate_vht - VHT MCS/NSS txrate bitmap + * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.) + */ +struct nl80211_txrate_vht { + __u16 mcs[NL80211_VHT_NSS_MAX]; +}; + +enum nl80211_txrate_gi { + NL80211_TXRATE_DEFAULT_GI, + NL80211_TXRATE_FORCE_SGI, + NL80211_TXRATE_FORCE_LGI, +}; + /** * enum nl80211_band - Frequency band * @NL80211_BAND_2GHZ: 2.4 GHz ISM band @@ -2805,49 +3356,65 @@ enum nl80211_tx_power_setting { }; /** - * enum nl80211_wowlan_packet_pattern_attr - WoWLAN packet pattern attribute - * @__NL80211_WOWLAN_PKTPAT_INVALID: invalid number for nested attribute - * @NL80211_WOWLAN_PKTPAT_PATTERN: the pattern, values where the mask has + * enum nl80211_packet_pattern_attr - packet pattern attribute + * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute + * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has * a zero bit are ignored - * @NL80211_WOWLAN_PKTPAT_MASK: pattern mask, must be long enough to have + * @NL80211_PKTPAT_MASK: pattern mask, must be long enough to have * a bit for each byte in the pattern. The lowest-order bit corresponds * to the first byte of the pattern, but the bytes of the pattern are * in a little-endian-like format, i.e. the 9th byte of the pattern * corresponds to the lowest-order bit in the second byte of the mask. * For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where * xx indicates "don't care") would be represented by a pattern of - * twelve zero bytes, and a mask of "0xed,0x07". + * twelve zero bytes, and a mask of "0xed,0x01". * Note that the pattern matching is done as though frames were not * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked * first (including SNAP header unpacking) and then matched. - * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes - * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number + * @NL80211_PKTPAT_OFFSET: packet offset, pattern is matched after + * these fixed number of bytes of received packet + * @NUM_NL80211_PKTPAT: number of attributes + * @MAX_NL80211_PKTPAT: max attribute number */ -enum nl80211_wowlan_packet_pattern_attr { - __NL80211_WOWLAN_PKTPAT_INVALID, - NL80211_WOWLAN_PKTPAT_MASK, - NL80211_WOWLAN_PKTPAT_PATTERN, - - NUM_NL80211_WOWLAN_PKTPAT, - MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1, +enum nl80211_packet_pattern_attr { + __NL80211_PKTPAT_INVALID, + NL80211_PKTPAT_MASK, + NL80211_PKTPAT_PATTERN, + NL80211_PKTPAT_OFFSET, + + NUM_NL80211_PKTPAT, + MAX_NL80211_PKTPAT = NUM_NL80211_PKTPAT - 1, }; /** - * struct nl80211_wowlan_pattern_support - pattern support information + * struct nl80211_pattern_support - packet pattern support information * @max_patterns: maximum number of patterns supported * @min_pattern_len: minimum length of each pattern * @max_pattern_len: maximum length of each pattern + * @max_pkt_offset: maximum Rx packet offset * * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when - * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the - * capability information given by the kernel to userspace. + * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED or in + * %NL80211_ATTR_COALESCE_RULE_PKT_PATTERN when that is part of + * %NL80211_ATTR_COALESCE_RULE in the capability information given + * by the kernel to userspace. */ -struct nl80211_wowlan_pattern_support { +struct nl80211_pattern_support { __u32 max_patterns; __u32 min_pattern_len; __u32 max_pattern_len; + __u32 max_pkt_offset; } __attribute__((packed)); +/* only for backward compatibility */ +#define __NL80211_WOWLAN_PKTPAT_INVALID __NL80211_PKTPAT_INVALID +#define NL80211_WOWLAN_PKTPAT_MASK NL80211_PKTPAT_MASK +#define NL80211_WOWLAN_PKTPAT_PATTERN NL80211_PKTPAT_PATTERN +#define NL80211_WOWLAN_PKTPAT_OFFSET NL80211_PKTPAT_OFFSET +#define NUM_NL80211_WOWLAN_PKTPAT NUM_NL80211_PKTPAT +#define MAX_NL80211_WOWLAN_PKTPAT MAX_NL80211_PKTPAT +#define nl80211_wowlan_pattern_support nl80211_pattern_support + /** * enum nl80211_wowlan_triggers - WoWLAN trigger definitions * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes @@ -2861,12 +3428,17 @@ struct nl80211_wowlan_pattern_support { * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns * which are passed in an array of nested attributes, each nested attribute * defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern. - * Each pattern defines a wakeup packet. The matching is done on the MSDU, - * i.e. as though the packet was an 802.3 packet, so the pattern matching - * is done after the packet is converted to the MSDU. + * Each pattern defines a wakeup packet. Packet offset is associated with + * each pattern which is used while matching the pattern. The matching is + * done on the MSDU, i.e. as though the packet was an 802.3 packet, so the + * pattern matching is done after the packet is converted to the MSDU. * * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute - * carrying a &struct nl80211_wowlan_pattern_support. + * carrying a &struct nl80211_pattern_support. + * + * When reporting wakeup. it is a u32 attribute containing the 0-based + * index of the pattern that caused the wakeup, in the patterns passed + * to the kernel when configuring. * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be * used when setting, used only to indicate that GTK rekeying is supported * by the device (flag) @@ -2877,8 +3449,36 @@ struct nl80211_wowlan_pattern_support { * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag) * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released * (on devices that have rfkill in the device) (flag) + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211: For wakeup reporting only, contains + * the 802.11 packet that caused the wakeup, e.g. a deauth frame. The frame + * may be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN + * attribute contains the original length. + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN: Original length of the 802.11 + * packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211 + * attribute if the packet was truncated somewhere. + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023: For wakeup reporting only, contains the + * 802.11 packet that caused the wakeup, e.g. a magic packet. The frame may + * be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN attribute + * contains the original length. + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN: Original length of the 802.3 + * packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023 + * attribute if the packet was truncated somewhere. + * @NL80211_WOWLAN_TRIG_TCP_CONNECTION: TCP connection wake, see DOC section + * "TCP connection wakeup" for more details. This is a nested attribute + * containing the exact information for establishing and keeping alive + * the TCP connection. + * @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the + * wakeup packet was received on the TCP connection + * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the + * TCP connection was lost or failed to be established + * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only, + * the TCP connection ran out of tokens to use for data to send to the + * service * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number + * + * These nested attributes are used to configure the wakeup triggers and + * to report the wakeup reason(s). */ enum nl80211_wowlan_triggers { __NL80211_WOWLAN_TRIG_INVALID, @@ -2891,6 +3491,14 @@ enum nl80211_wowlan_triggers { NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST, NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE, NL80211_WOWLAN_TRIG_RFKILL_RELEASE, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN, + NL80211_WOWLAN_TRIG_TCP_CONNECTION, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS, /* keep last */ NUM_NL80211_WOWLAN_TRIG, @@ -2898,6 +3506,165 @@ enum nl80211_wowlan_triggers { }; /** + * DOC: TCP connection wakeup + * + * Some devices can establish a TCP connection in order to be woken up by a + * packet coming in from outside their network segment, or behind NAT. If + * configured, the device will establish a TCP connection to the given + * service, and periodically send data to that service. The first data + * packet is usually transmitted after SYN/ACK, also ACKing the SYN/ACK. + * The data packets can optionally include a (little endian) sequence + * number (in the TCP payload!) that is generated by the device, and, also + * optionally, a token from a list of tokens. This serves as a keep-alive + * with the service, and for NATed connections, etc. + * + * During this keep-alive period, the server doesn't send any data to the + * client. When receiving data, it is compared against the wakeup pattern + * (and mask) and if it matches, the host is woken up. Similarly, if the + * connection breaks or cannot be established to start with, the host is + * also woken up. + * + * Developer's note: ARP offload is required for this, otherwise TCP + * response packets might not go through correctly. + */ + +/** + * struct nl80211_wowlan_tcp_data_seq - WoWLAN TCP data sequence + * @start: starting value + * @offset: offset of sequence number in packet + * @len: length of the sequence value to write, 1 through 4 + * + * Note: don't confuse with the TCP sequence number(s), this is for the + * keepalive packet payload. The actual value is written into the packet + * in little endian. + */ +struct nl80211_wowlan_tcp_data_seq { + __u32 start, offset, len; +}; + +/** + * struct nl80211_wowlan_tcp_data_token - WoWLAN TCP data token config + * @offset: offset of token in packet + * @len: length of each token + * @token_stream: stream of data to be used for the tokens, the length must + * be a multiple of @len for this to make sense + */ +struct nl80211_wowlan_tcp_data_token { + __u32 offset, len; + __u8 token_stream[]; +}; + +/** + * struct nl80211_wowlan_tcp_data_token_feature - data token features + * @min_len: minimum token length + * @max_len: maximum token length + * @bufsize: total available token buffer size (max size of @token_stream) + */ +struct nl80211_wowlan_tcp_data_token_feature { + __u32 min_len, max_len, bufsize; +}; + +/** + * enum nl80211_wowlan_tcp_attrs - WoWLAN TCP connection parameters + * @__NL80211_WOWLAN_TCP_INVALID: invalid number for nested attributes + * @NL80211_WOWLAN_TCP_SRC_IPV4: source IPv4 address (in network byte order) + * @NL80211_WOWLAN_TCP_DST_IPV4: destination IPv4 address + * (in network byte order) + * @NL80211_WOWLAN_TCP_DST_MAC: destination MAC address, this is given because + * route lookup when configured might be invalid by the time we suspend, + * and doing a route lookup when suspending is no longer possible as it + * might require ARP querying. + * @NL80211_WOWLAN_TCP_SRC_PORT: source port (u16); optional, if not given a + * socket and port will be allocated + * @NL80211_WOWLAN_TCP_DST_PORT: destination port (u16) + * @NL80211_WOWLAN_TCP_DATA_PAYLOAD: data packet payload, at least one byte. + * For feature advertising, a u32 attribute holding the maximum length + * of the data payload. + * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ: data packet sequence configuration + * (if desired), a &struct nl80211_wowlan_tcp_data_seq. For feature + * advertising it is just a flag + * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN: data packet token configuration, + * see &struct nl80211_wowlan_tcp_data_token and for advertising see + * &struct nl80211_wowlan_tcp_data_token_feature. + * @NL80211_WOWLAN_TCP_DATA_INTERVAL: data interval in seconds, maximum + * interval in feature advertising (u32) + * @NL80211_WOWLAN_TCP_WAKE_PAYLOAD: wake packet payload, for advertising a + * u32 attribute holding the maximum length + * @NL80211_WOWLAN_TCP_WAKE_MASK: Wake packet payload mask, not used for + * feature advertising. The mask works like @NL80211_PKTPAT_MASK + * but on the TCP payload only. + * @NUM_NL80211_WOWLAN_TCP: number of TCP attributes + * @MAX_NL80211_WOWLAN_TCP: highest attribute number + */ +enum nl80211_wowlan_tcp_attrs { + __NL80211_WOWLAN_TCP_INVALID, + NL80211_WOWLAN_TCP_SRC_IPV4, + NL80211_WOWLAN_TCP_DST_IPV4, + NL80211_WOWLAN_TCP_DST_MAC, + NL80211_WOWLAN_TCP_SRC_PORT, + NL80211_WOWLAN_TCP_DST_PORT, + NL80211_WOWLAN_TCP_DATA_PAYLOAD, + NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ, + NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN, + NL80211_WOWLAN_TCP_DATA_INTERVAL, + NL80211_WOWLAN_TCP_WAKE_PAYLOAD, + NL80211_WOWLAN_TCP_WAKE_MASK, + + /* keep last */ + NUM_NL80211_WOWLAN_TCP, + MAX_NL80211_WOWLAN_TCP = NUM_NL80211_WOWLAN_TCP - 1 +}; + +/** + * struct nl80211_coalesce_rule_support - coalesce rule support information + * @max_rules: maximum number of rules supported + * @pat: packet pattern support information + * @max_delay: maximum supported coalescing delay in msecs + * + * This struct is carried in %NL80211_ATTR_COALESCE_RULE in the + * capability information given by the kernel to userspace. + */ +struct nl80211_coalesce_rule_support { + __u32 max_rules; + struct nl80211_pattern_support pat; + __u32 max_delay; +} __attribute__((packed)); + +/** + * enum nl80211_attr_coalesce_rule - coalesce rule attribute + * @__NL80211_COALESCE_RULE_INVALID: invalid number for nested attribute + * @NL80211_ATTR_COALESCE_RULE_DELAY: delay in msecs used for packet coalescing + * @NL80211_ATTR_COALESCE_RULE_CONDITION: condition for packet coalescence, + * see &enum nl80211_coalesce_condition. + * @NL80211_ATTR_COALESCE_RULE_PKT_PATTERN: packet offset, pattern is matched + * after these fixed number of bytes of received packet + * @NUM_NL80211_ATTR_COALESCE_RULE: number of attributes + * @NL80211_ATTR_COALESCE_RULE_MAX: max attribute number + */ +enum nl80211_attr_coalesce_rule { + __NL80211_COALESCE_RULE_INVALID, + NL80211_ATTR_COALESCE_RULE_DELAY, + NL80211_ATTR_COALESCE_RULE_CONDITION, + NL80211_ATTR_COALESCE_RULE_PKT_PATTERN, + + /* keep last */ + NUM_NL80211_ATTR_COALESCE_RULE, + NL80211_ATTR_COALESCE_RULE_MAX = NUM_NL80211_ATTR_COALESCE_RULE - 1 +}; + +/** + * enum nl80211_coalesce_condition - coalesce rule conditions + * @NL80211_COALESCE_CONDITION_MATCH: coalaesce Rx packets when patterns + * in a rule are matched. + * @NL80211_COALESCE_CONDITION_NO_MATCH: coalesce Rx packets when patterns + * in a rule are not matched. + */ +enum nl80211_coalesce_condition { + NL80211_COALESCE_CONDITION_MATCH, + NL80211_COALESCE_CONDITION_NO_MATCH +}; + +/** * enum nl80211_iface_limit_attrs - limit attributes * @NL80211_IFACE_LIMIT_UNSPEC: (reserved) * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that @@ -2933,6 +3700,10 @@ enum nl80211_iface_limit_attrs { * the infrastructure network's beacon interval. * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many * different channels may be used within this group. + * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap + * of supported channel widths for radar detection. + * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap + * of supported regulatory regions for radar detection. * @NUM_NL80211_IFACE_COMB: number of attributes * @MAX_NL80211_IFACE_COMB: highest attribute number * @@ -2965,6 +3736,8 @@ enum nl80211_if_combination_attrs { NL80211_IFACE_COMB_MAXNUM, NL80211_IFACE_COMB_STA_AP_BI_MATCH, NL80211_IFACE_COMB_NUM_CHANNELS, + NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS, + NL80211_IFACE_COMB_RADAR_DETECT_REGIONS, /* keep last */ NUM_NL80211_IFACE_COMB, @@ -3004,6 +3777,23 @@ enum nl80211_plink_state { MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1 }; +/** + * enum nl80211_plink_action - actions to perform in mesh peers + * + * @NL80211_PLINK_ACTION_NO_ACTION: perform no action + * @NL80211_PLINK_ACTION_OPEN: start mesh peer link establishment + * @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer + * @NUM_NL80211_PLINK_ACTIONS: number of possible actions + */ +enum plink_actions { + NL80211_PLINK_ACTION_NO_ACTION, + NL80211_PLINK_ACTION_OPEN, + NL80211_PLINK_ACTION_BLOCK, + + NUM_NL80211_PLINK_ACTIONS, +}; + + #define NL80211_KCK_LEN 16 #define NL80211_KEK_LEN 16 #define NL80211_REPLAY_CTR_LEN 8 @@ -3121,11 +3911,8 @@ enum nl80211_ap_sme_features { * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested * to work properly to suppport receiving regulatory hints from * cellular base stations. - * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active - * P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel - * in the interface combinations, even when it's only used for scan - * and remain-on-channel. This could be due to, for example, the - * remain-on-channel implementation requiring a channel context. + * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: (no longer available, only + * here to reserve the value for API/ABI compatibility) * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of * equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station * mode @@ -3140,6 +3927,30 @@ enum nl80211_ap_sme_features { * setting * @NL80211_FEATURE_P2P_GO_OPPPS: P2P GO implementation supports opportunistic * powersave + * @NL80211_FEATURE_FULL_AP_CLIENT_STATE: The driver supports full state + * transitions for AP clients. Without this flag (and if the driver + * doesn't have the AP SME in the device) the driver supports adding + * stations only when they're associated and adds them in associated + * state (to later be transitioned into authorized), with this flag + * they should be added before even sending the authentication reply + * and then transitioned into authenticated, associated and authorized + * states using station flags. + * Note that even for drivers that support this, the default is to add + * stations in authenticated/associated state, so to add unauthenticated + * stations the authenticated/associated bits have to be set in the mask. + * @NL80211_FEATURE_ADVERTISE_CHAN_LIMITS: cfg80211 advertises channel limits + * (HT40, VHT 80/160 MHz) if this flag is set + * @NL80211_FEATURE_USERSPACE_MPM: This driver supports a userspace Mesh + * Peering Management entity which may be implemented by registering for + * beacons or NL80211_CMD_NEW_PEER_CANDIDATE events. The mesh beacon is + * still generated by the driver. + * @NL80211_FEATURE_ACTIVE_MONITOR: This driver supports an active monitor + * interface. An active monitor interface behaves like a normal monitor + * interface, but gets added to the driver. It ensures that incoming + * unicast packets directed at the configured interface address get ACKed. + * @NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE: This driver supports dynamic + * channel bandwidth change (e.g., HT 20 <-> 40 MHz channel) during the + * lifetime of a BSS. */ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, @@ -3155,6 +3966,12 @@ enum nl80211_feature_flags { NL80211_FEATURE_NEED_OBSS_SCAN = 1 << 10, NL80211_FEATURE_P2P_GO_CTWIN = 1 << 11, NL80211_FEATURE_P2P_GO_OPPPS = 1 << 12, + /* bit 13 is reserved */ + NL80211_FEATURE_ADVERTISE_CHAN_LIMITS = 1 << 14, + NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15, + NL80211_FEATURE_USERSPACE_MPM = 1 << 16, + NL80211_FEATURE_ACTIVE_MONITOR = 1 << 17, + NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE = 1 << 18, }; /** @@ -3182,7 +3999,7 @@ enum nl80211_probe_resp_offload_support_attr { * enum nl80211_connect_failed_reason - connection request failed reasons * @NL80211_CONN_FAIL_MAX_CLIENTS: Maximum number of clients that can be * handled by the AP is reached. - * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Client's MAC is in the AP's blocklist. + * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Connection request is rejected due to ACL. */ enum nl80211_connect_failed_reason { NL80211_CONN_FAIL_MAX_CLIENTS, @@ -3210,4 +4027,141 @@ enum nl80211_scan_flags { NL80211_SCAN_FLAG_AP = 1<<2, }; +/** + * enum nl80211_acl_policy - access control policy + * + * Access control policy is applied on a MAC list set by + * %NL80211_CMD_START_AP and %NL80211_CMD_SET_MAC_ACL, to + * be used with %NL80211_ATTR_ACL_POLICY. + * + * @NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED: Deny stations which are + * listed in ACL, i.e. allow all the stations which are not listed + * in ACL to authenticate. + * @NL80211_ACL_POLICY_DENY_UNLESS_LISTED: Allow the stations which are listed + * in ACL, i.e. deny all the stations which are not listed in ACL. + */ +enum nl80211_acl_policy { + NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED, + NL80211_ACL_POLICY_DENY_UNLESS_LISTED, +}; + +/** + * enum nl80211_radar_event - type of radar event for DFS operation + * + * Type of event to be used with NL80211_ATTR_RADAR_EVENT to inform userspace + * about detected radars or success of the channel available check (CAC) + * + * @NL80211_RADAR_DETECTED: A radar pattern has been detected. The channel is + * now unusable. + * @NL80211_RADAR_CAC_FINISHED: Channel Availability Check has been finished, + * the channel is now available. + * @NL80211_RADAR_CAC_ABORTED: Channel Availability Check has been aborted, no + * change to the channel status. + * @NL80211_RADAR_NOP_FINISHED: The Non-Occupancy Period for this channel is + * over, channel becomes usable. + */ +enum nl80211_radar_event { + NL80211_RADAR_DETECTED, + NL80211_RADAR_CAC_FINISHED, + NL80211_RADAR_CAC_ABORTED, + NL80211_RADAR_NOP_FINISHED, +}; + +/** + * enum nl80211_dfs_state - DFS states for channels + * + * Channel states used by the DFS code. + * + * @NL80211_DFS_USABLE: The channel can be used, but channel availability + * check (CAC) must be performed before using it for AP or IBSS. + * @NL80211_DFS_UNAVAILABLE: A radar has been detected on this channel, it + * is therefore marked as not available. + * @NL80211_DFS_AVAILABLE: The channel has been CAC checked and is available. + */ +enum nl80211_dfs_state { + NL80211_DFS_USABLE, + NL80211_DFS_UNAVAILABLE, + NL80211_DFS_AVAILABLE, +}; + +/** + * enum enum nl80211_protocol_features - nl80211 protocol features + * @NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP: nl80211 supports splitting + * wiphy dumps (if requested by the application with the attribute + * %NL80211_ATTR_SPLIT_WIPHY_DUMP. Also supported is filtering the + * wiphy dump by %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFINDEX or + * %NL80211_ATTR_WDEV. + */ +enum nl80211_protocol_features { + NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP = 1 << 0, +}; + +/** + * enum nl80211_crit_proto_id - nl80211 critical protocol identifiers + * + * @NL80211_CRIT_PROTO_UNSPEC: protocol unspecified. + * @NL80211_CRIT_PROTO_DHCP: BOOTP or DHCPv6 protocol. + * @NL80211_CRIT_PROTO_EAPOL: EAPOL protocol. + * @NL80211_CRIT_PROTO_APIPA: APIPA protocol. + * @NUM_NL80211_CRIT_PROTO: must be kept last. + */ +enum nl80211_crit_proto_id { + NL80211_CRIT_PROTO_UNSPEC, + NL80211_CRIT_PROTO_DHCP, + NL80211_CRIT_PROTO_EAPOL, + NL80211_CRIT_PROTO_APIPA, + /* add other protocols before this one */ + NUM_NL80211_CRIT_PROTO +}; + +/* maximum duration for critical protocol measures */ +#define NL80211_CRIT_PROTO_MAX_DURATION 5000 /* msec */ + +/** + * enum nl80211_rxmgmt_flags - flags for received management frame. + * + * Used by cfg80211_rx_mgmt() + * + * @NL80211_RXMGMT_FLAG_ANSWERED: frame was answered by device/driver. + */ +enum nl80211_rxmgmt_flags { + NL80211_RXMGMT_FLAG_ANSWERED = 1 << 0, +}; + +/* + * If this flag is unset, the lower 24 bits are an OUI, if set + * a Linux nl80211 vendor ID is used (no such IDs are allocated + * yet, so that's not valid so far) + */ +#define NL80211_VENDOR_ID_IS_LINUX 0x80000000 + +/** + * struct nl80211_vendor_cmd_info - vendor command data + * @vendor_id: If the %NL80211_VENDOR_ID_IS_LINUX flag is clear, then the + * value is a 24-bit OUI; if it is set then a separately allocated ID + * may be used, but no such IDs are allocated yet. New IDs should be + * added to this file when needed. + * @subcmd: sub-command ID for the command + */ +struct nl80211_vendor_cmd_info { + __u32 vendor_id; + __u32 subcmd; +}; + +/** + * enum nl80211_tdls_peer_capability - TDLS peer flags. + * + * Used by tdls_mgmt() to determine which conditional elements need + * to be added to TDLS Setup frames. + * + * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable. + * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable. + * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable. + */ +enum nl80211_tdls_peer_capability { + NL80211_TDLS_PEER_HT = 1<<0, + NL80211_TDLS_PEER_VHT = 1<<1, + NL80211_TDLS_PEER_WMM = 1<<2, +}; + #endif /* __LINUX_NL80211_H */ diff --git a/include/uapi/linux/nvme.h b/include/uapi/linux/nvme.h new file mode 100644 index 00000000000..29a7d8619d8 --- /dev/null +++ b/include/uapi/linux/nvme.h @@ -0,0 +1,517 @@ +/* + * Definitions for the NVM Express interface + * Copyright (c) 2011-2014, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef _UAPI_LINUX_NVME_H +#define _UAPI_LINUX_NVME_H + +#include <linux/types.h> + +struct nvme_id_power_state { + __le16 max_power; /* centiwatts */ + __u8 rsvd2; + __u8 flags; + __le32 entry_lat; /* microseconds */ + __le32 exit_lat; /* microseconds */ + __u8 read_tput; + __u8 read_lat; + __u8 write_tput; + __u8 write_lat; + __le16 idle_power; + __u8 idle_scale; + __u8 rsvd19; + __le16 active_power; + __u8 active_work_scale; + __u8 rsvd23[9]; +}; + +enum { + NVME_PS_FLAGS_MAX_POWER_SCALE = 1 << 0, + NVME_PS_FLAGS_NON_OP_STATE = 1 << 1, +}; + +struct nvme_id_ctrl { + __le16 vid; + __le16 ssvid; + char sn[20]; + char mn[40]; + char fr[8]; + __u8 rab; + __u8 ieee[3]; + __u8 mic; + __u8 mdts; + __u16 cntlid; + __u32 ver; + __u8 rsvd84[172]; + __le16 oacs; + __u8 acl; + __u8 aerl; + __u8 frmw; + __u8 lpa; + __u8 elpe; + __u8 npss; + __u8 avscc; + __u8 apsta; + __le16 wctemp; + __le16 cctemp; + __u8 rsvd270[242]; + __u8 sqes; + __u8 cqes; + __u8 rsvd514[2]; + __le32 nn; + __le16 oncs; + __le16 fuses; + __u8 fna; + __u8 vwc; + __le16 awun; + __le16 awupf; + __u8 nvscc; + __u8 rsvd531; + __le16 acwu; + __u8 rsvd534[2]; + __le32 sgls; + __u8 rsvd540[1508]; + struct nvme_id_power_state psd[32]; + __u8 vs[1024]; +}; + +enum { + NVME_CTRL_ONCS_COMPARE = 1 << 0, + NVME_CTRL_ONCS_WRITE_UNCORRECTABLE = 1 << 1, + NVME_CTRL_ONCS_DSM = 1 << 2, + NVME_CTRL_VWC_PRESENT = 1 << 0, +}; + +struct nvme_lbaf { + __le16 ms; + __u8 ds; + __u8 rp; +}; + +struct nvme_id_ns { + __le64 nsze; + __le64 ncap; + __le64 nuse; + __u8 nsfeat; + __u8 nlbaf; + __u8 flbas; + __u8 mc; + __u8 dpc; + __u8 dps; + __u8 nmic; + __u8 rescap; + __u8 fpi; + __u8 rsvd33; + __le16 nawun; + __le16 nawupf; + __le16 nacwu; + __u8 rsvd40[80]; + __u8 eui64[8]; + struct nvme_lbaf lbaf[16]; + __u8 rsvd192[192]; + __u8 vs[3712]; +}; + +enum { + NVME_NS_FEAT_THIN = 1 << 0, + NVME_LBAF_RP_BEST = 0, + NVME_LBAF_RP_BETTER = 1, + NVME_LBAF_RP_GOOD = 2, + NVME_LBAF_RP_DEGRADED = 3, +}; + +struct nvme_smart_log { + __u8 critical_warning; + __u8 temperature[2]; + __u8 avail_spare; + __u8 spare_thresh; + __u8 percent_used; + __u8 rsvd6[26]; + __u8 data_units_read[16]; + __u8 data_units_written[16]; + __u8 host_reads[16]; + __u8 host_writes[16]; + __u8 ctrl_busy_time[16]; + __u8 power_cycles[16]; + __u8 power_on_hours[16]; + __u8 unsafe_shutdowns[16]; + __u8 media_errors[16]; + __u8 num_err_log_entries[16]; + __le32 warning_temp_time; + __le32 critical_comp_time; + __le16 temp_sensor[8]; + __u8 rsvd216[296]; +}; + +enum { + NVME_SMART_CRIT_SPARE = 1 << 0, + NVME_SMART_CRIT_TEMPERATURE = 1 << 1, + NVME_SMART_CRIT_RELIABILITY = 1 << 2, + NVME_SMART_CRIT_MEDIA = 1 << 3, + NVME_SMART_CRIT_VOLATILE_MEMORY = 1 << 4, +}; + +struct nvme_lba_range_type { + __u8 type; + __u8 attributes; + __u8 rsvd2[14]; + __u64 slba; + __u64 nlb; + __u8 guid[16]; + __u8 rsvd48[16]; +}; + +enum { + NVME_LBART_TYPE_FS = 0x01, + NVME_LBART_TYPE_RAID = 0x02, + NVME_LBART_TYPE_CACHE = 0x03, + NVME_LBART_TYPE_SWAP = 0x04, + + NVME_LBART_ATTRIB_TEMP = 1 << 0, + NVME_LBART_ATTRIB_HIDE = 1 << 1, +}; + +/* I/O commands */ + +enum nvme_opcode { + nvme_cmd_flush = 0x00, + nvme_cmd_write = 0x01, + nvme_cmd_read = 0x02, + nvme_cmd_write_uncor = 0x04, + nvme_cmd_compare = 0x05, + nvme_cmd_dsm = 0x09, +}; + +struct nvme_common_command { + __u8 opcode; + __u8 flags; + __u16 command_id; + __le32 nsid; + __le32 cdw2[2]; + __le64 metadata; + __le64 prp1; + __le64 prp2; + __le32 cdw10[6]; +}; + +struct nvme_rw_command { + __u8 opcode; + __u8 flags; + __u16 command_id; + __le32 nsid; + __u64 rsvd2; + __le64 metadata; + __le64 prp1; + __le64 prp2; + __le64 slba; + __le16 length; + __le16 control; + __le32 dsmgmt; + __le32 reftag; + __le16 apptag; + __le16 appmask; +}; + +enum { + NVME_RW_LR = 1 << 15, + NVME_RW_FUA = 1 << 14, + NVME_RW_DSM_FREQ_UNSPEC = 0, + NVME_RW_DSM_FREQ_TYPICAL = 1, + NVME_RW_DSM_FREQ_RARE = 2, + NVME_RW_DSM_FREQ_READS = 3, + NVME_RW_DSM_FREQ_WRITES = 4, + NVME_RW_DSM_FREQ_RW = 5, + NVME_RW_DSM_FREQ_ONCE = 6, + NVME_RW_DSM_FREQ_PREFETCH = 7, + NVME_RW_DSM_FREQ_TEMP = 8, + NVME_RW_DSM_LATENCY_NONE = 0 << 4, + NVME_RW_DSM_LATENCY_IDLE = 1 << 4, + NVME_RW_DSM_LATENCY_NORM = 2 << 4, + NVME_RW_DSM_LATENCY_LOW = 3 << 4, + NVME_RW_DSM_SEQ_REQ = 1 << 6, + NVME_RW_DSM_COMPRESSED = 1 << 7, +}; + +struct nvme_dsm_cmd { + __u8 opcode; + __u8 flags; + __u16 command_id; + __le32 nsid; + __u64 rsvd2[2]; + __le64 prp1; + __le64 prp2; + __le32 nr; + __le32 attributes; + __u32 rsvd12[4]; +}; + +enum { + NVME_DSMGMT_IDR = 1 << 0, + NVME_DSMGMT_IDW = 1 << 1, + NVME_DSMGMT_AD = 1 << 2, +}; + +struct nvme_dsm_range { + __le32 cattr; + __le32 nlb; + __le64 slba; +}; + +/* Admin commands */ + +enum nvme_admin_opcode { + nvme_admin_delete_sq = 0x00, + nvme_admin_create_sq = 0x01, + nvme_admin_get_log_page = 0x02, + nvme_admin_delete_cq = 0x04, + nvme_admin_create_cq = 0x05, + nvme_admin_identify = 0x06, + nvme_admin_abort_cmd = 0x08, + nvme_admin_set_features = 0x09, + nvme_admin_get_features = 0x0a, + nvme_admin_async_event = 0x0c, + nvme_admin_activate_fw = 0x10, + nvme_admin_download_fw = 0x11, + nvme_admin_format_nvm = 0x80, + nvme_admin_security_send = 0x81, + nvme_admin_security_recv = 0x82, +}; + +enum { + NVME_QUEUE_PHYS_CONTIG = (1 << 0), + NVME_CQ_IRQ_ENABLED = (1 << 1), + NVME_SQ_PRIO_URGENT = (0 << 1), + NVME_SQ_PRIO_HIGH = (1 << 1), + NVME_SQ_PRIO_MEDIUM = (2 << 1), + NVME_SQ_PRIO_LOW = (3 << 1), + NVME_FEAT_ARBITRATION = 0x01, + NVME_FEAT_POWER_MGMT = 0x02, + NVME_FEAT_LBA_RANGE = 0x03, + NVME_FEAT_TEMP_THRESH = 0x04, + NVME_FEAT_ERR_RECOVERY = 0x05, + NVME_FEAT_VOLATILE_WC = 0x06, + NVME_FEAT_NUM_QUEUES = 0x07, + NVME_FEAT_IRQ_COALESCE = 0x08, + NVME_FEAT_IRQ_CONFIG = 0x09, + NVME_FEAT_WRITE_ATOMIC = 0x0a, + NVME_FEAT_ASYNC_EVENT = 0x0b, + NVME_FEAT_SW_PROGRESS = 0x0c, + NVME_LOG_ERROR = 0x01, + NVME_LOG_SMART = 0x02, + NVME_LOG_FW_SLOT = 0x03, + NVME_LOG_RESERVATION = 0x80, + NVME_FWACT_REPL = (0 << 3), + NVME_FWACT_REPL_ACTV = (1 << 3), + NVME_FWACT_ACTV = (2 << 3), +}; + +struct nvme_identify { + __u8 opcode; + __u8 flags; + __u16 command_id; + __le32 nsid; + __u64 rsvd2[2]; + __le64 prp1; + __le64 prp2; + __le32 cns; + __u32 rsvd11[5]; +}; + +struct nvme_features { + __u8 opcode; + __u8 flags; + __u16 command_id; + __le32 nsid; + __u64 rsvd2[2]; + __le64 prp1; + __le64 prp2; + __le32 fid; + __le32 dword11; + __u32 rsvd12[4]; +}; + +struct nvme_create_cq { + __u8 opcode; + __u8 flags; + __u16 command_id; + __u32 rsvd1[5]; + __le64 prp1; + __u64 rsvd8; + __le16 cqid; + __le16 qsize; + __le16 cq_flags; + __le16 irq_vector; + __u32 rsvd12[4]; +}; + +struct nvme_create_sq { + __u8 opcode; + __u8 flags; + __u16 command_id; + __u32 rsvd1[5]; + __le64 prp1; + __u64 rsvd8; + __le16 sqid; + __le16 qsize; + __le16 sq_flags; + __le16 cqid; + __u32 rsvd12[4]; +}; + +struct nvme_delete_queue { + __u8 opcode; + __u8 flags; + __u16 command_id; + __u32 rsvd1[9]; + __le16 qid; + __u16 rsvd10; + __u32 rsvd11[5]; +}; + +struct nvme_abort_cmd { + __u8 opcode; + __u8 flags; + __u16 command_id; + __u32 rsvd1[9]; + __le16 sqid; + __u16 cid; + __u32 rsvd11[5]; +}; + +struct nvme_download_firmware { + __u8 opcode; + __u8 flags; + __u16 command_id; + __u32 rsvd1[5]; + __le64 prp1; + __le64 prp2; + __le32 numd; + __le32 offset; + __u32 rsvd12[4]; +}; + +struct nvme_format_cmd { + __u8 opcode; + __u8 flags; + __u16 command_id; + __le32 nsid; + __u64 rsvd2[4]; + __le32 cdw10; + __u32 rsvd11[5]; +}; + +struct nvme_command { + union { + struct nvme_common_command common; + struct nvme_rw_command rw; + struct nvme_identify identify; + struct nvme_features features; + struct nvme_create_cq create_cq; + struct nvme_create_sq create_sq; + struct nvme_delete_queue delete_queue; + struct nvme_download_firmware dlfw; + struct nvme_format_cmd format; + struct nvme_dsm_cmd dsm; + struct nvme_abort_cmd abort; + }; +}; + +enum { + NVME_SC_SUCCESS = 0x0, + NVME_SC_INVALID_OPCODE = 0x1, + NVME_SC_INVALID_FIELD = 0x2, + NVME_SC_CMDID_CONFLICT = 0x3, + NVME_SC_DATA_XFER_ERROR = 0x4, + NVME_SC_POWER_LOSS = 0x5, + NVME_SC_INTERNAL = 0x6, + NVME_SC_ABORT_REQ = 0x7, + NVME_SC_ABORT_QUEUE = 0x8, + NVME_SC_FUSED_FAIL = 0x9, + NVME_SC_FUSED_MISSING = 0xa, + NVME_SC_INVALID_NS = 0xb, + NVME_SC_CMD_SEQ_ERROR = 0xc, + NVME_SC_LBA_RANGE = 0x80, + NVME_SC_CAP_EXCEEDED = 0x81, + NVME_SC_NS_NOT_READY = 0x82, + NVME_SC_CQ_INVALID = 0x100, + NVME_SC_QID_INVALID = 0x101, + NVME_SC_QUEUE_SIZE = 0x102, + NVME_SC_ABORT_LIMIT = 0x103, + NVME_SC_ABORT_MISSING = 0x104, + NVME_SC_ASYNC_LIMIT = 0x105, + NVME_SC_FIRMWARE_SLOT = 0x106, + NVME_SC_FIRMWARE_IMAGE = 0x107, + NVME_SC_INVALID_VECTOR = 0x108, + NVME_SC_INVALID_LOG_PAGE = 0x109, + NVME_SC_INVALID_FORMAT = 0x10a, + NVME_SC_BAD_ATTRIBUTES = 0x180, + NVME_SC_WRITE_FAULT = 0x280, + NVME_SC_READ_ERROR = 0x281, + NVME_SC_GUARD_CHECK = 0x282, + NVME_SC_APPTAG_CHECK = 0x283, + NVME_SC_REFTAG_CHECK = 0x284, + NVME_SC_COMPARE_FAILED = 0x285, + NVME_SC_ACCESS_DENIED = 0x286, + NVME_SC_DNR = 0x4000, +}; + +struct nvme_completion { + __le32 result; /* Used by admin commands to return data */ + __u32 rsvd; + __le16 sq_head; /* how much of this queue may be reclaimed */ + __le16 sq_id; /* submission queue that generated this entry */ + __u16 command_id; /* of the command which completed */ + __le16 status; /* did the command fail, and if so, why? */ +}; + +struct nvme_user_io { + __u8 opcode; + __u8 flags; + __u16 control; + __u16 nblocks; + __u16 rsvd; + __u64 metadata; + __u64 addr; + __u64 slba; + __u32 dsmgmt; + __u32 reftag; + __u16 apptag; + __u16 appmask; +}; + +struct nvme_admin_cmd { + __u8 opcode; + __u8 flags; + __u16 rsvd1; + __u32 nsid; + __u32 cdw2; + __u32 cdw3; + __u64 metadata; + __u64 addr; + __u32 metadata_len; + __u32 data_len; + __u32 cdw10; + __u32 cdw11; + __u32 cdw12; + __u32 cdw13; + __u32 cdw14; + __u32 cdw15; + __u32 timeout_ms; + __u32 result; +}; + +#define NVME_IOCTL_ID _IO('N', 0x40) +#define NVME_IOCTL_ADMIN_CMD _IOWR('N', 0x41, struct nvme_admin_cmd) +#define NVME_IOCTL_SUBMIT_IO _IOW('N', 0x42, struct nvme_user_io) + +#endif /* _UAPI_LINUX_NVME_H */ diff --git a/include/uapi/linux/openvswitch.h b/include/uapi/linux/openvswitch.h new file mode 100644 index 00000000000..0b979ee4bfc --- /dev/null +++ b/include/uapi/linux/openvswitch.h @@ -0,0 +1,524 @@ + +/* + * Copyright (c) 2007-2013 Nicira, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public + * License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA + */ + +#ifndef _UAPI__LINUX_OPENVSWITCH_H +#define _UAPI__LINUX_OPENVSWITCH_H 1 + +#include <linux/types.h> +#include <linux/if_ether.h> + +/** + * struct ovs_header - header for OVS Generic Netlink messages. + * @dp_ifindex: ifindex of local port for datapath (0 to make a request not + * specific to a datapath). + * + * Attributes following the header are specific to a particular OVS Generic + * Netlink family, but all of the OVS families use this header. + */ + +struct ovs_header { + int dp_ifindex; +}; + +/* Datapaths. */ + +#define OVS_DATAPATH_FAMILY "ovs_datapath" +#define OVS_DATAPATH_MCGROUP "ovs_datapath" + +/* V2: + * - API users are expected to provide OVS_DP_ATTR_USER_FEATURES + * when creating the datapath. + */ +#define OVS_DATAPATH_VERSION 2 + +/* First OVS datapath version to support features */ +#define OVS_DP_VER_FEATURES 2 + +enum ovs_datapath_cmd { + OVS_DP_CMD_UNSPEC, + OVS_DP_CMD_NEW, + OVS_DP_CMD_DEL, + OVS_DP_CMD_GET, + OVS_DP_CMD_SET +}; + +/** + * enum ovs_datapath_attr - attributes for %OVS_DP_* commands. + * @OVS_DP_ATTR_NAME: Name of the network device that serves as the "local + * port". This is the name of the network device whose dp_ifindex is given in + * the &struct ovs_header. Always present in notifications. Required in + * %OVS_DP_NEW requests. May be used as an alternative to specifying + * dp_ifindex in other requests (with a dp_ifindex of 0). + * @OVS_DP_ATTR_UPCALL_PID: The Netlink socket in userspace that is initially + * set on the datapath port (for OVS_ACTION_ATTR_MISS). Only valid on + * %OVS_DP_CMD_NEW requests. A value of zero indicates that upcalls should + * not be sent. + * @OVS_DP_ATTR_STATS: Statistics about packets that have passed through the + * datapath. Always present in notifications. + * @OVS_DP_ATTR_MEGAFLOW_STATS: Statistics about mega flow masks usage for the + * datapath. Always present in notifications. + * + * These attributes follow the &struct ovs_header within the Generic Netlink + * payload for %OVS_DP_* commands. + */ +enum ovs_datapath_attr { + OVS_DP_ATTR_UNSPEC, + OVS_DP_ATTR_NAME, /* name of dp_ifindex netdev */ + OVS_DP_ATTR_UPCALL_PID, /* Netlink PID to receive upcalls */ + OVS_DP_ATTR_STATS, /* struct ovs_dp_stats */ + OVS_DP_ATTR_MEGAFLOW_STATS, /* struct ovs_dp_megaflow_stats */ + OVS_DP_ATTR_USER_FEATURES, /* OVS_DP_F_* */ + __OVS_DP_ATTR_MAX +}; + +#define OVS_DP_ATTR_MAX (__OVS_DP_ATTR_MAX - 1) + +struct ovs_dp_stats { + __u64 n_hit; /* Number of flow table matches. */ + __u64 n_missed; /* Number of flow table misses. */ + __u64 n_lost; /* Number of misses not sent to userspace. */ + __u64 n_flows; /* Number of flows present */ +}; + +struct ovs_dp_megaflow_stats { + __u64 n_mask_hit; /* Number of masks used for flow lookups. */ + __u32 n_masks; /* Number of masks for the datapath. */ + __u32 pad0; /* Pad for future expension. */ + __u64 pad1; /* Pad for future expension. */ + __u64 pad2; /* Pad for future expension. */ +}; + +struct ovs_vport_stats { + __u64 rx_packets; /* total packets received */ + __u64 tx_packets; /* total packets transmitted */ + __u64 rx_bytes; /* total bytes received */ + __u64 tx_bytes; /* total bytes transmitted */ + __u64 rx_errors; /* bad packets received */ + __u64 tx_errors; /* packet transmit problems */ + __u64 rx_dropped; /* no space in linux buffers */ + __u64 tx_dropped; /* no space available in linux */ +}; + +/* Allow last Netlink attribute to be unaligned */ +#define OVS_DP_F_UNALIGNED (1 << 0) + +/* Fixed logical ports. */ +#define OVSP_LOCAL ((__u32)0) + +/* Packet transfer. */ + +#define OVS_PACKET_FAMILY "ovs_packet" +#define OVS_PACKET_VERSION 0x1 + +enum ovs_packet_cmd { + OVS_PACKET_CMD_UNSPEC, + + /* Kernel-to-user notifications. */ + OVS_PACKET_CMD_MISS, /* Flow table miss. */ + OVS_PACKET_CMD_ACTION, /* OVS_ACTION_ATTR_USERSPACE action. */ + + /* Userspace commands. */ + OVS_PACKET_CMD_EXECUTE /* Apply actions to a packet. */ +}; + +/** + * enum ovs_packet_attr - attributes for %OVS_PACKET_* commands. + * @OVS_PACKET_ATTR_PACKET: Present for all notifications. Contains the entire + * packet as received, from the start of the Ethernet header onward. For + * %OVS_PACKET_CMD_ACTION, %OVS_PACKET_ATTR_PACKET reflects changes made by + * actions preceding %OVS_ACTION_ATTR_USERSPACE, but %OVS_PACKET_ATTR_KEY is + * the flow key extracted from the packet as originally received. + * @OVS_PACKET_ATTR_KEY: Present for all notifications. Contains the flow key + * extracted from the packet as nested %OVS_KEY_ATTR_* attributes. This allows + * userspace to adapt its flow setup strategy by comparing its notion of the + * flow key against the kernel's. + * @OVS_PACKET_ATTR_ACTIONS: Contains actions for the packet. Used + * for %OVS_PACKET_CMD_EXECUTE. It has nested %OVS_ACTION_ATTR_* attributes. + * @OVS_PACKET_ATTR_USERDATA: Present for an %OVS_PACKET_CMD_ACTION + * notification if the %OVS_ACTION_ATTR_USERSPACE action specified an + * %OVS_USERSPACE_ATTR_USERDATA attribute, with the same length and content + * specified there. + * + * These attributes follow the &struct ovs_header within the Generic Netlink + * payload for %OVS_PACKET_* commands. + */ +enum ovs_packet_attr { + OVS_PACKET_ATTR_UNSPEC, + OVS_PACKET_ATTR_PACKET, /* Packet data. */ + OVS_PACKET_ATTR_KEY, /* Nested OVS_KEY_ATTR_* attributes. */ + OVS_PACKET_ATTR_ACTIONS, /* Nested OVS_ACTION_ATTR_* attributes. */ + OVS_PACKET_ATTR_USERDATA, /* OVS_ACTION_ATTR_USERSPACE arg. */ + __OVS_PACKET_ATTR_MAX +}; + +#define OVS_PACKET_ATTR_MAX (__OVS_PACKET_ATTR_MAX - 1) + +/* Virtual ports. */ + +#define OVS_VPORT_FAMILY "ovs_vport" +#define OVS_VPORT_MCGROUP "ovs_vport" +#define OVS_VPORT_VERSION 0x1 + +enum ovs_vport_cmd { + OVS_VPORT_CMD_UNSPEC, + OVS_VPORT_CMD_NEW, + OVS_VPORT_CMD_DEL, + OVS_VPORT_CMD_GET, + OVS_VPORT_CMD_SET +}; + +enum ovs_vport_type { + OVS_VPORT_TYPE_UNSPEC, + OVS_VPORT_TYPE_NETDEV, /* network device */ + OVS_VPORT_TYPE_INTERNAL, /* network device implemented by datapath */ + OVS_VPORT_TYPE_GRE, /* GRE tunnel. */ + OVS_VPORT_TYPE_VXLAN, /* VXLAN tunnel. */ + __OVS_VPORT_TYPE_MAX +}; + +#define OVS_VPORT_TYPE_MAX (__OVS_VPORT_TYPE_MAX - 1) + +/** + * enum ovs_vport_attr - attributes for %OVS_VPORT_* commands. + * @OVS_VPORT_ATTR_PORT_NO: 32-bit port number within datapath. + * @OVS_VPORT_ATTR_TYPE: 32-bit %OVS_VPORT_TYPE_* constant describing the type + * of vport. + * @OVS_VPORT_ATTR_NAME: Name of vport. For a vport based on a network device + * this is the name of the network device. Maximum length %IFNAMSIZ-1 bytes + * plus a null terminator. + * @OVS_VPORT_ATTR_OPTIONS: Vport-specific configuration information. + * @OVS_VPORT_ATTR_UPCALL_PID: The Netlink socket in userspace that + * OVS_PACKET_CMD_MISS upcalls will be directed to for packets received on + * this port. A value of zero indicates that upcalls should not be sent. + * @OVS_VPORT_ATTR_STATS: A &struct ovs_vport_stats giving statistics for + * packets sent or received through the vport. + * + * These attributes follow the &struct ovs_header within the Generic Netlink + * payload for %OVS_VPORT_* commands. + * + * For %OVS_VPORT_CMD_NEW requests, the %OVS_VPORT_ATTR_TYPE and + * %OVS_VPORT_ATTR_NAME attributes are required. %OVS_VPORT_ATTR_PORT_NO is + * optional; if not specified a free port number is automatically selected. + * Whether %OVS_VPORT_ATTR_OPTIONS is required or optional depends on the type + * of vport. + * + * For other requests, if %OVS_VPORT_ATTR_NAME is specified then it is used to + * look up the vport to operate on; otherwise dp_idx from the &struct + * ovs_header plus %OVS_VPORT_ATTR_PORT_NO determine the vport. + */ +enum ovs_vport_attr { + OVS_VPORT_ATTR_UNSPEC, + OVS_VPORT_ATTR_PORT_NO, /* u32 port number within datapath */ + OVS_VPORT_ATTR_TYPE, /* u32 OVS_VPORT_TYPE_* constant. */ + OVS_VPORT_ATTR_NAME, /* string name, up to IFNAMSIZ bytes long */ + OVS_VPORT_ATTR_OPTIONS, /* nested attributes, varies by vport type */ + OVS_VPORT_ATTR_UPCALL_PID, /* u32 Netlink PID to receive upcalls */ + OVS_VPORT_ATTR_STATS, /* struct ovs_vport_stats */ + __OVS_VPORT_ATTR_MAX +}; + +#define OVS_VPORT_ATTR_MAX (__OVS_VPORT_ATTR_MAX - 1) + +/* OVS_VPORT_ATTR_OPTIONS attributes for tunnels. + */ +enum { + OVS_TUNNEL_ATTR_UNSPEC, + OVS_TUNNEL_ATTR_DST_PORT, /* 16-bit UDP port, used by L4 tunnels. */ + __OVS_TUNNEL_ATTR_MAX +}; + +#define OVS_TUNNEL_ATTR_MAX (__OVS_TUNNEL_ATTR_MAX - 1) + +/* Flows. */ + +#define OVS_FLOW_FAMILY "ovs_flow" +#define OVS_FLOW_MCGROUP "ovs_flow" +#define OVS_FLOW_VERSION 0x1 + +enum ovs_flow_cmd { + OVS_FLOW_CMD_UNSPEC, + OVS_FLOW_CMD_NEW, + OVS_FLOW_CMD_DEL, + OVS_FLOW_CMD_GET, + OVS_FLOW_CMD_SET +}; + +struct ovs_flow_stats { + __u64 n_packets; /* Number of matched packets. */ + __u64 n_bytes; /* Number of matched bytes. */ +}; + +enum ovs_key_attr { + OVS_KEY_ATTR_UNSPEC, + OVS_KEY_ATTR_ENCAP, /* Nested set of encapsulated attributes. */ + OVS_KEY_ATTR_PRIORITY, /* u32 skb->priority */ + OVS_KEY_ATTR_IN_PORT, /* u32 OVS dp port number */ + OVS_KEY_ATTR_ETHERNET, /* struct ovs_key_ethernet */ + OVS_KEY_ATTR_VLAN, /* be16 VLAN TCI */ + OVS_KEY_ATTR_ETHERTYPE, /* be16 Ethernet type */ + OVS_KEY_ATTR_IPV4, /* struct ovs_key_ipv4 */ + OVS_KEY_ATTR_IPV6, /* struct ovs_key_ipv6 */ + OVS_KEY_ATTR_TCP, /* struct ovs_key_tcp */ + OVS_KEY_ATTR_UDP, /* struct ovs_key_udp */ + OVS_KEY_ATTR_ICMP, /* struct ovs_key_icmp */ + OVS_KEY_ATTR_ICMPV6, /* struct ovs_key_icmpv6 */ + OVS_KEY_ATTR_ARP, /* struct ovs_key_arp */ + OVS_KEY_ATTR_ND, /* struct ovs_key_nd */ + OVS_KEY_ATTR_SKB_MARK, /* u32 skb mark */ + OVS_KEY_ATTR_TUNNEL, /* Nested set of ovs_tunnel attributes */ + OVS_KEY_ATTR_SCTP, /* struct ovs_key_sctp */ + OVS_KEY_ATTR_TCP_FLAGS, /* be16 TCP flags. */ + +#ifdef __KERNEL__ + OVS_KEY_ATTR_IPV4_TUNNEL, /* struct ovs_key_ipv4_tunnel */ +#endif + __OVS_KEY_ATTR_MAX +}; + +#define OVS_KEY_ATTR_MAX (__OVS_KEY_ATTR_MAX - 1) + +enum ovs_tunnel_key_attr { + OVS_TUNNEL_KEY_ATTR_ID, /* be64 Tunnel ID */ + OVS_TUNNEL_KEY_ATTR_IPV4_SRC, /* be32 src IP address. */ + OVS_TUNNEL_KEY_ATTR_IPV4_DST, /* be32 dst IP address. */ + OVS_TUNNEL_KEY_ATTR_TOS, /* u8 Tunnel IP ToS. */ + OVS_TUNNEL_KEY_ATTR_TTL, /* u8 Tunnel IP TTL. */ + OVS_TUNNEL_KEY_ATTR_DONT_FRAGMENT, /* No argument, set DF. */ + OVS_TUNNEL_KEY_ATTR_CSUM, /* No argument. CSUM packet. */ + __OVS_TUNNEL_KEY_ATTR_MAX +}; + +#define OVS_TUNNEL_KEY_ATTR_MAX (__OVS_TUNNEL_KEY_ATTR_MAX - 1) + +/** + * enum ovs_frag_type - IPv4 and IPv6 fragment type + * @OVS_FRAG_TYPE_NONE: Packet is not a fragment. + * @OVS_FRAG_TYPE_FIRST: Packet is a fragment with offset 0. + * @OVS_FRAG_TYPE_LATER: Packet is a fragment with nonzero offset. + * + * Used as the @ipv4_frag in &struct ovs_key_ipv4 and as @ipv6_frag &struct + * ovs_key_ipv6. + */ +enum ovs_frag_type { + OVS_FRAG_TYPE_NONE, + OVS_FRAG_TYPE_FIRST, + OVS_FRAG_TYPE_LATER, + __OVS_FRAG_TYPE_MAX +}; + +#define OVS_FRAG_TYPE_MAX (__OVS_FRAG_TYPE_MAX - 1) + +struct ovs_key_ethernet { + __u8 eth_src[ETH_ALEN]; + __u8 eth_dst[ETH_ALEN]; +}; + +struct ovs_key_ipv4 { + __be32 ipv4_src; + __be32 ipv4_dst; + __u8 ipv4_proto; + __u8 ipv4_tos; + __u8 ipv4_ttl; + __u8 ipv4_frag; /* One of OVS_FRAG_TYPE_*. */ +}; + +struct ovs_key_ipv6 { + __be32 ipv6_src[4]; + __be32 ipv6_dst[4]; + __be32 ipv6_label; /* 20-bits in least-significant bits. */ + __u8 ipv6_proto; + __u8 ipv6_tclass; + __u8 ipv6_hlimit; + __u8 ipv6_frag; /* One of OVS_FRAG_TYPE_*. */ +}; + +struct ovs_key_tcp { + __be16 tcp_src; + __be16 tcp_dst; +}; + +struct ovs_key_udp { + __be16 udp_src; + __be16 udp_dst; +}; + +struct ovs_key_sctp { + __be16 sctp_src; + __be16 sctp_dst; +}; + +struct ovs_key_icmp { + __u8 icmp_type; + __u8 icmp_code; +}; + +struct ovs_key_icmpv6 { + __u8 icmpv6_type; + __u8 icmpv6_code; +}; + +struct ovs_key_arp { + __be32 arp_sip; + __be32 arp_tip; + __be16 arp_op; + __u8 arp_sha[ETH_ALEN]; + __u8 arp_tha[ETH_ALEN]; +}; + +struct ovs_key_nd { + __u32 nd_target[4]; + __u8 nd_sll[ETH_ALEN]; + __u8 nd_tll[ETH_ALEN]; +}; + +/** + * enum ovs_flow_attr - attributes for %OVS_FLOW_* commands. + * @OVS_FLOW_ATTR_KEY: Nested %OVS_KEY_ATTR_* attributes specifying the flow + * key. Always present in notifications. Required for all requests (except + * dumps). + * @OVS_FLOW_ATTR_ACTIONS: Nested %OVS_ACTION_ATTR_* attributes specifying + * the actions to take for packets that match the key. Always present in + * notifications. Required for %OVS_FLOW_CMD_NEW requests, optional for + * %OVS_FLOW_CMD_SET requests. An %OVS_FLOW_CMD_SET without + * %OVS_FLOW_ATTR_ACTIONS will not modify the actions. To clear the actions, + * an %OVS_FLOW_ATTR_ACTIONS without any nested attributes must be given. + * @OVS_FLOW_ATTR_STATS: &struct ovs_flow_stats giving statistics for this + * flow. Present in notifications if the stats would be nonzero. Ignored in + * requests. + * @OVS_FLOW_ATTR_TCP_FLAGS: An 8-bit value giving the OR'd value of all of the + * TCP flags seen on packets in this flow. Only present in notifications for + * TCP flows, and only if it would be nonzero. Ignored in requests. + * @OVS_FLOW_ATTR_USED: A 64-bit integer giving the time, in milliseconds on + * the system monotonic clock, at which a packet was last processed for this + * flow. Only present in notifications if a packet has been processed for this + * flow. Ignored in requests. + * @OVS_FLOW_ATTR_CLEAR: If present in a %OVS_FLOW_CMD_SET request, clears the + * last-used time, accumulated TCP flags, and statistics for this flow. + * Otherwise ignored in requests. Never present in notifications. + * @OVS_FLOW_ATTR_MASK: Nested %OVS_KEY_ATTR_* attributes specifying the + * mask bits for wildcarded flow match. Mask bit value '1' specifies exact + * match with corresponding flow key bit, while mask bit value '0' specifies + * a wildcarded match. Omitting attribute is treated as wildcarding all + * corresponding fields. Optional for all requests. If not present, + * all flow key bits are exact match bits. + * + * These attributes follow the &struct ovs_header within the Generic Netlink + * payload for %OVS_FLOW_* commands. + */ +enum ovs_flow_attr { + OVS_FLOW_ATTR_UNSPEC, + OVS_FLOW_ATTR_KEY, /* Sequence of OVS_KEY_ATTR_* attributes. */ + OVS_FLOW_ATTR_ACTIONS, /* Nested OVS_ACTION_ATTR_* attributes. */ + OVS_FLOW_ATTR_STATS, /* struct ovs_flow_stats. */ + OVS_FLOW_ATTR_TCP_FLAGS, /* 8-bit OR'd TCP flags. */ + OVS_FLOW_ATTR_USED, /* u64 msecs last used in monotonic time. */ + OVS_FLOW_ATTR_CLEAR, /* Flag to clear stats, tcp_flags, used. */ + OVS_FLOW_ATTR_MASK, /* Sequence of OVS_KEY_ATTR_* attributes. */ + __OVS_FLOW_ATTR_MAX +}; + +#define OVS_FLOW_ATTR_MAX (__OVS_FLOW_ATTR_MAX - 1) + +/** + * enum ovs_sample_attr - Attributes for %OVS_ACTION_ATTR_SAMPLE action. + * @OVS_SAMPLE_ATTR_PROBABILITY: 32-bit fraction of packets to sample with + * @OVS_ACTION_ATTR_SAMPLE. A value of 0 samples no packets, a value of + * %UINT32_MAX samples all packets and intermediate values sample intermediate + * fractions of packets. + * @OVS_SAMPLE_ATTR_ACTIONS: Set of actions to execute in sampling event. + * Actions are passed as nested attributes. + * + * Executes the specified actions with the given probability on a per-packet + * basis. + */ +enum ovs_sample_attr { + OVS_SAMPLE_ATTR_UNSPEC, + OVS_SAMPLE_ATTR_PROBABILITY, /* u32 number */ + OVS_SAMPLE_ATTR_ACTIONS, /* Nested OVS_ACTION_ATTR_* attributes. */ + __OVS_SAMPLE_ATTR_MAX, +}; + +#define OVS_SAMPLE_ATTR_MAX (__OVS_SAMPLE_ATTR_MAX - 1) + +/** + * enum ovs_userspace_attr - Attributes for %OVS_ACTION_ATTR_USERSPACE action. + * @OVS_USERSPACE_ATTR_PID: u32 Netlink PID to which the %OVS_PACKET_CMD_ACTION + * message should be sent. Required. + * @OVS_USERSPACE_ATTR_USERDATA: If present, its variable-length argument is + * copied to the %OVS_PACKET_CMD_ACTION message as %OVS_PACKET_ATTR_USERDATA. + */ +enum ovs_userspace_attr { + OVS_USERSPACE_ATTR_UNSPEC, + OVS_USERSPACE_ATTR_PID, /* u32 Netlink PID to receive upcalls. */ + OVS_USERSPACE_ATTR_USERDATA, /* Optional user-specified cookie. */ + __OVS_USERSPACE_ATTR_MAX +}; + +#define OVS_USERSPACE_ATTR_MAX (__OVS_USERSPACE_ATTR_MAX - 1) + +/** + * struct ovs_action_push_vlan - %OVS_ACTION_ATTR_PUSH_VLAN action argument. + * @vlan_tpid: Tag protocol identifier (TPID) to push. + * @vlan_tci: Tag control identifier (TCI) to push. The CFI bit must be set + * (but it will not be set in the 802.1Q header that is pushed). + * + * The @vlan_tpid value is typically %ETH_P_8021Q. The only acceptable TPID + * values are those that the kernel module also parses as 802.1Q headers, to + * prevent %OVS_ACTION_ATTR_PUSH_VLAN followed by %OVS_ACTION_ATTR_POP_VLAN + * from having surprising results. + */ +struct ovs_action_push_vlan { + __be16 vlan_tpid; /* 802.1Q TPID. */ + __be16 vlan_tci; /* 802.1Q TCI (VLAN ID and priority). */ +}; + +/** + * enum ovs_action_attr - Action types. + * + * @OVS_ACTION_ATTR_OUTPUT: Output packet to port. + * @OVS_ACTION_ATTR_USERSPACE: Send packet to userspace according to nested + * %OVS_USERSPACE_ATTR_* attributes. + * @OVS_ACTION_ATTR_SET: Replaces the contents of an existing header. The + * single nested %OVS_KEY_ATTR_* attribute specifies a header to modify and its + * value. + * @OVS_ACTION_ATTR_PUSH_VLAN: Push a new outermost 802.1Q header onto the + * packet. + * @OVS_ACTION_ATTR_POP_VLAN: Pop the outermost 802.1Q header off the packet. + * @OVS_ACTION_ATTR_SAMPLE: Probabilitically executes actions, as specified in + * the nested %OVS_SAMPLE_ATTR_* attributes. + * + * Only a single header can be set with a single %OVS_ACTION_ATTR_SET. Not all + * fields within a header are modifiable, e.g. the IPv4 protocol and fragment + * type may not be changed. + */ + +enum ovs_action_attr { + OVS_ACTION_ATTR_UNSPEC, + OVS_ACTION_ATTR_OUTPUT, /* u32 port number. */ + OVS_ACTION_ATTR_USERSPACE, /* Nested OVS_USERSPACE_ATTR_*. */ + OVS_ACTION_ATTR_SET, /* One nested OVS_KEY_ATTR_*. */ + OVS_ACTION_ATTR_PUSH_VLAN, /* struct ovs_action_push_vlan. */ + OVS_ACTION_ATTR_POP_VLAN, /* No argument. */ + OVS_ACTION_ATTR_SAMPLE, /* Nested OVS_SAMPLE_ATTR_*. */ + __OVS_ACTION_ATTR_MAX +}; + +#define OVS_ACTION_ATTR_MAX (__OVS_ACTION_ATTR_MAX - 1) + +#endif /* _LINUX_OPENVSWITCH_H */ diff --git a/include/uapi/linux/packet_diag.h b/include/uapi/linux/packet_diag.h index 93f5fa94a43..d08c63f3dd6 100644 --- a/include/uapi/linux/packet_diag.h +++ b/include/uapi/linux/packet_diag.h @@ -16,6 +16,8 @@ struct packet_diag_req { #define PACKET_SHOW_MCLIST 0x00000002 /* A set of packet_diag_mclist-s */ #define PACKET_SHOW_RING_CFG 0x00000004 /* Rings configuration parameters */ #define PACKET_SHOW_FANOUT 0x00000008 +#define PACKET_SHOW_MEMINFO 0x00000010 +#define PACKET_SHOW_FILTER 0x00000020 struct packet_diag_msg { __u8 pdiag_family; @@ -27,15 +29,21 @@ struct packet_diag_msg { }; enum { + /* PACKET_DIAG_NONE, standard nl API requires this attribute! */ PACKET_DIAG_INFO, PACKET_DIAG_MCLIST, PACKET_DIAG_RX_RING, PACKET_DIAG_TX_RING, PACKET_DIAG_FANOUT, + PACKET_DIAG_UID, + PACKET_DIAG_MEMINFO, + PACKET_DIAG_FILTER, - PACKET_DIAG_MAX, + __PACKET_DIAG_MAX, }; +#define PACKET_DIAG_MAX (__PACKET_DIAG_MAX - 1) + struct packet_diag_info { __u32 pdi_index; __u32 pdi_version; diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h index ebfadc56d1b..30db069bce6 100644 --- a/include/uapi/linux/pci_regs.h +++ b/include/uapi/linux/pci_regs.h @@ -13,10 +13,10 @@ * PCI to PCI Bridge Specification * PCI System Design Guide * - * For hypertransport information, please consult the following manuals - * from http://www.hypertransport.org + * For HyperTransport information, please consult the following manuals + * from http://www.hypertransport.org * - * The Hypertransport I/O Link Specification + * The HyperTransport I/O Link Specification */ #ifndef LINUX_PCI_REGS_H @@ -37,7 +37,7 @@ #define PCI_COMMAND_INVALIDATE 0x10 /* Use memory write and invalidate */ #define PCI_COMMAND_VGA_PALETTE 0x20 /* Enable palette snooping */ #define PCI_COMMAND_PARITY 0x40 /* Enable parity checking */ -#define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */ +#define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */ #define PCI_COMMAND_SERR 0x100 /* Enable SERR */ #define PCI_COMMAND_FAST_BACK 0x200 /* Enable back-to-back writes */ #define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */ @@ -45,7 +45,7 @@ #define PCI_STATUS 0x06 /* 16 bits */ #define PCI_STATUS_INTERRUPT 0x08 /* Interrupt status */ #define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */ -#define PCI_STATUS_66MHZ 0x20 /* Support 66 Mhz PCI 2.1 bus */ +#define PCI_STATUS_66MHZ 0x20 /* Support 66 MHz PCI 2.1 bus */ #define PCI_STATUS_UDF 0x40 /* Support User Definable Features [obsolete] */ #define PCI_STATUS_FAST_BACK 0x80 /* Accept fast-back to back */ #define PCI_STATUS_PARITY 0x100 /* Detected parity error */ @@ -205,14 +205,14 @@ #define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */ #define PCI_CAP_ID_PCIX 0x07 /* PCI-X */ #define PCI_CAP_ID_HT 0x08 /* HyperTransport */ -#define PCI_CAP_ID_VNDR 0x09 /* Vendor specific */ +#define PCI_CAP_ID_VNDR 0x09 /* Vendor-Specific */ #define PCI_CAP_ID_DBG 0x0A /* Debug port */ #define PCI_CAP_ID_CCRC 0x0B /* CompactPCI Central Resource Control */ -#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */ +#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */ #define PCI_CAP_ID_SSVID 0x0D /* Bridge subsystem vendor/device ID */ #define PCI_CAP_ID_AGP3 0x0E /* AGP Target PCI-PCI bridge */ #define PCI_CAP_ID_SECDEV 0x0F /* Secure Device */ -#define PCI_CAP_ID_EXP 0x10 /* PCI Express */ +#define PCI_CAP_ID_EXP 0x10 /* PCI Express */ #define PCI_CAP_ID_MSIX 0x11 /* MSI-X */ #define PCI_CAP_ID_SATA 0x12 /* SATA Data/Index Conf. */ #define PCI_CAP_ID_AF 0x13 /* PCI Advanced Features */ @@ -268,8 +268,8 @@ #define PCI_AGP_COMMAND_RQ_MASK 0xff000000 /* Master: Maximum number of requests */ #define PCI_AGP_COMMAND_SBA 0x0200 /* Sideband addressing enabled */ #define PCI_AGP_COMMAND_AGP 0x0100 /* Allow processing of AGP transactions */ -#define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow processing of 64-bit addresses */ -#define PCI_AGP_COMMAND_FW 0x0010 /* Force FW transfers */ +#define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow processing of 64-bit addresses */ +#define PCI_AGP_COMMAND_FW 0x0010 /* Force FW transfers */ #define PCI_AGP_COMMAND_RATE4 0x0004 /* Use 4x rate */ #define PCI_AGP_COMMAND_RATE2 0x0002 /* Use 2x rate */ #define PCI_AGP_COMMAND_RATE1 0x0001 /* Use 1x rate */ @@ -292,12 +292,12 @@ /* Message Signalled Interrupts registers */ -#define PCI_MSI_FLAGS 2 /* Various flags */ -#define PCI_MSI_FLAGS_64BIT 0x80 /* 64-bit addresses allowed */ -#define PCI_MSI_FLAGS_QSIZE 0x70 /* Message queue size configured */ -#define PCI_MSI_FLAGS_QMASK 0x0e /* Maximum queue size available */ -#define PCI_MSI_FLAGS_ENABLE 0x01 /* MSI feature enabled */ -#define PCI_MSI_FLAGS_MASKBIT 0x100 /* 64-bit mask bits allowed */ +#define PCI_MSI_FLAGS 2 /* Message Control */ +#define PCI_MSI_FLAGS_ENABLE 0x0001 /* MSI feature enabled */ +#define PCI_MSI_FLAGS_QMASK 0x000e /* Maximum queue size available */ +#define PCI_MSI_FLAGS_QSIZE 0x0070 /* Message queue size configured */ +#define PCI_MSI_FLAGS_64BIT 0x0080 /* 64-bit addresses allowed */ +#define PCI_MSI_FLAGS_MASKBIT 0x0100 /* Per-vector masking capable */ #define PCI_MSI_RFU 3 /* Rest of capability flags */ #define PCI_MSI_ADDRESS_LO 4 /* Lower 32 bits */ #define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */ @@ -309,16 +309,19 @@ #define PCI_MSI_PENDING_64 20 /* Pending intrs for 64-bit devices */ /* MSI-X registers */ -#define PCI_MSIX_FLAGS 2 -#define PCI_MSIX_FLAGS_QSIZE 0x7FF -#define PCI_MSIX_FLAGS_ENABLE (1 << 15) -#define PCI_MSIX_FLAGS_MASKALL (1 << 14) -#define PCI_MSIX_TABLE 4 -#define PCI_MSIX_PBA 8 -#define PCI_MSIX_FLAGS_BIRMASK (7 << 0) +#define PCI_MSIX_FLAGS 2 /* Message Control */ +#define PCI_MSIX_FLAGS_QSIZE 0x07FF /* Table size */ +#define PCI_MSIX_FLAGS_MASKALL 0x4000 /* Mask all vectors for this function */ +#define PCI_MSIX_FLAGS_ENABLE 0x8000 /* MSI-X enable */ +#define PCI_MSIX_TABLE 4 /* Table offset */ +#define PCI_MSIX_TABLE_BIR 0x00000007 /* BAR index */ +#define PCI_MSIX_TABLE_OFFSET 0xfffffff8 /* Offset into specified BAR */ +#define PCI_MSIX_PBA 8 /* Pending Bit Array offset */ +#define PCI_MSIX_PBA_BIR 0x00000007 /* BAR index */ +#define PCI_MSIX_PBA_OFFSET 0xfffffff8 /* Offset into specified BAR */ #define PCI_CAP_MSIX_SIZEOF 12 /* size of MSIX registers */ -/* MSI-X entry's format */ +/* MSI-X Table entry format */ #define PCI_MSIX_ENTRY_SIZE 16 #define PCI_MSIX_ENTRY_LOWER_ADDR 0 #define PCI_MSIX_ENTRY_UPPER_ADDR 4 @@ -369,7 +372,7 @@ #define PCI_X_CMD_SPLIT_16 0x0060 /* Max 16 */ #define PCI_X_CMD_SPLIT_32 0x0070 /* Max 32 */ #define PCI_X_CMD_MAX_SPLIT 0x0070 /* Max Outstanding Split Transactions */ -#define PCI_X_CMD_VERSION(x) (((x) >> 12) & 3) /* Version */ +#define PCI_X_CMD_VERSION(x) (((x) >> 12) & 3) /* Version */ #define PCI_X_STATUS 4 /* PCI-X capabilities */ #define PCI_X_STATUS_DEVFN 0x000000ff /* A copy of devfn */ #define PCI_X_STATUS_BUS 0x0000ff00 /* A copy of bus nr */ @@ -404,8 +407,8 @@ /* PCI Bridge Subsystem ID registers */ -#define PCI_SSVID_VENDOR_ID 4 /* PCI-Bridge subsystem vendor id register */ -#define PCI_SSVID_DEVICE_ID 6 /* PCI-Bridge subsystem device id register */ +#define PCI_SSVID_VENDOR_ID 4 /* PCI Bridge subsystem vendor ID */ +#define PCI_SSVID_DEVICE_ID 6 /* PCI Bridge subsystem device ID */ /* PCI Express capability registers */ @@ -417,24 +420,24 @@ #define PCI_EXP_TYPE_ROOT_PORT 0x4 /* Root Port */ #define PCI_EXP_TYPE_UPSTREAM 0x5 /* Upstream Port */ #define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */ -#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCI/PCI-X Bridge */ -#define PCI_EXP_TYPE_PCIE_BRIDGE 0x8 /* PCI/PCI-X to PCIE Bridge */ +#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCIe to PCI/PCI-X Bridge */ +#define PCI_EXP_TYPE_PCIE_BRIDGE 0x8 /* PCI/PCI-X to PCIe Bridge */ #define PCI_EXP_TYPE_RC_END 0x9 /* Root Complex Integrated Endpoint */ #define PCI_EXP_TYPE_RC_EC 0xa /* Root Complex Event Collector */ #define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */ #define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */ #define PCI_EXP_DEVCAP 4 /* Device capabilities */ -#define PCI_EXP_DEVCAP_PAYLOAD 0x07 /* Max_Payload_Size */ -#define PCI_EXP_DEVCAP_PHANTOM 0x18 /* Phantom functions */ -#define PCI_EXP_DEVCAP_EXT_TAG 0x20 /* Extended tags */ -#define PCI_EXP_DEVCAP_L0S 0x1c0 /* L0s Acceptable Latency */ -#define PCI_EXP_DEVCAP_L1 0xe00 /* L1 Acceptable Latency */ -#define PCI_EXP_DEVCAP_ATN_BUT 0x1000 /* Attention Button Present */ -#define PCI_EXP_DEVCAP_ATN_IND 0x2000 /* Attention Indicator Present */ -#define PCI_EXP_DEVCAP_PWR_IND 0x4000 /* Power Indicator Present */ -#define PCI_EXP_DEVCAP_RBER 0x8000 /* Role-Based Error Reporting */ -#define PCI_EXP_DEVCAP_PWR_VAL 0x3fc0000 /* Slot Power Limit Value */ -#define PCI_EXP_DEVCAP_PWR_SCL 0xc000000 /* Slot Power Limit Scale */ +#define PCI_EXP_DEVCAP_PAYLOAD 0x00000007 /* Max_Payload_Size */ +#define PCI_EXP_DEVCAP_PHANTOM 0x00000018 /* Phantom functions */ +#define PCI_EXP_DEVCAP_EXT_TAG 0x00000020 /* Extended tags */ +#define PCI_EXP_DEVCAP_L0S 0x000001c0 /* L0s Acceptable Latency */ +#define PCI_EXP_DEVCAP_L1 0x00000e00 /* L1 Acceptable Latency */ +#define PCI_EXP_DEVCAP_ATN_BUT 0x00001000 /* Attention Button Present */ +#define PCI_EXP_DEVCAP_ATN_IND 0x00002000 /* Attention Indicator Present */ +#define PCI_EXP_DEVCAP_PWR_IND 0x00004000 /* Power Indicator Present */ +#define PCI_EXP_DEVCAP_RBER 0x00008000 /* Role-Based Error Reporting */ +#define PCI_EXP_DEVCAP_PWR_VAL 0x03fc0000 /* Slot Power Limit Value */ +#define PCI_EXP_DEVCAP_PWR_SCL 0x0c000000 /* Slot Power Limit Scale */ #define PCI_EXP_DEVCAP_FLR 0x10000000 /* Function Level Reset */ #define PCI_EXP_DEVCTL 8 /* Device Control */ #define PCI_EXP_DEVCTL_CERE 0x0001 /* Correctable Error Reporting En. */ @@ -450,43 +453,48 @@ #define PCI_EXP_DEVCTL_READRQ 0x7000 /* Max_Read_Request_Size */ #define PCI_EXP_DEVCTL_BCR_FLR 0x8000 /* Bridge Configuration Retry / FLR */ #define PCI_EXP_DEVSTA 10 /* Device Status */ -#define PCI_EXP_DEVSTA_CED 0x01 /* Correctable Error Detected */ -#define PCI_EXP_DEVSTA_NFED 0x02 /* Non-Fatal Error Detected */ -#define PCI_EXP_DEVSTA_FED 0x04 /* Fatal Error Detected */ -#define PCI_EXP_DEVSTA_URD 0x08 /* Unsupported Request Detected */ -#define PCI_EXP_DEVSTA_AUXPD 0x10 /* AUX Power Detected */ -#define PCI_EXP_DEVSTA_TRPND 0x20 /* Transactions Pending */ +#define PCI_EXP_DEVSTA_CED 0x0001 /* Correctable Error Detected */ +#define PCI_EXP_DEVSTA_NFED 0x0002 /* Non-Fatal Error Detected */ +#define PCI_EXP_DEVSTA_FED 0x0004 /* Fatal Error Detected */ +#define PCI_EXP_DEVSTA_URD 0x0008 /* Unsupported Request Detected */ +#define PCI_EXP_DEVSTA_AUXPD 0x0010 /* AUX Power Detected */ +#define PCI_EXP_DEVSTA_TRPND 0x0020 /* Transactions Pending */ #define PCI_EXP_LNKCAP 12 /* Link Capabilities */ #define PCI_EXP_LNKCAP_SLS 0x0000000f /* Supported Link Speeds */ -#define PCI_EXP_LNKCAP_SLS_2_5GB 0x1 /* LNKCAP2 SLS Vector bit 0 (2.5GT/s) */ -#define PCI_EXP_LNKCAP_SLS_5_0GB 0x2 /* LNKCAP2 SLS Vector bit 1 (5.0GT/s) */ +#define PCI_EXP_LNKCAP_SLS_2_5GB 0x00000001 /* LNKCAP2 SLS Vector bit 0 */ +#define PCI_EXP_LNKCAP_SLS_5_0GB 0x00000002 /* LNKCAP2 SLS Vector bit 1 */ #define PCI_EXP_LNKCAP_MLW 0x000003f0 /* Maximum Link Width */ #define PCI_EXP_LNKCAP_ASPMS 0x00000c00 /* ASPM Support */ #define PCI_EXP_LNKCAP_L0SEL 0x00007000 /* L0s Exit Latency */ #define PCI_EXP_LNKCAP_L1EL 0x00038000 /* L1 Exit Latency */ -#define PCI_EXP_LNKCAP_CLKPM 0x00040000 /* L1 Clock Power Management */ +#define PCI_EXP_LNKCAP_CLKPM 0x00040000 /* Clock Power Management */ #define PCI_EXP_LNKCAP_SDERC 0x00080000 /* Surprise Down Error Reporting Capable */ #define PCI_EXP_LNKCAP_DLLLARC 0x00100000 /* Data Link Layer Link Active Reporting Capable */ #define PCI_EXP_LNKCAP_LBNC 0x00200000 /* Link Bandwidth Notification Capability */ #define PCI_EXP_LNKCAP_PN 0xff000000 /* Port Number */ #define PCI_EXP_LNKCTL 16 /* Link Control */ #define PCI_EXP_LNKCTL_ASPMC 0x0003 /* ASPM Control */ -#define PCI_EXP_LNKCTL_ASPM_L0S 0x01 /* L0s Enable */ -#define PCI_EXP_LNKCTL_ASPM_L1 0x02 /* L1 Enable */ +#define PCI_EXP_LNKCTL_ASPM_L0S 0x0001 /* L0s Enable */ +#define PCI_EXP_LNKCTL_ASPM_L1 0x0002 /* L1 Enable */ #define PCI_EXP_LNKCTL_RCB 0x0008 /* Read Completion Boundary */ #define PCI_EXP_LNKCTL_LD 0x0010 /* Link Disable */ #define PCI_EXP_LNKCTL_RL 0x0020 /* Retrain Link */ #define PCI_EXP_LNKCTL_CCC 0x0040 /* Common Clock Configuration */ #define PCI_EXP_LNKCTL_ES 0x0080 /* Extended Synch */ -#define PCI_EXP_LNKCTL_CLKREQ_EN 0x100 /* Enable clkreq */ +#define PCI_EXP_LNKCTL_CLKREQ_EN 0x0100 /* Enable clkreq */ #define PCI_EXP_LNKCTL_HAWD 0x0200 /* Hardware Autonomous Width Disable */ #define PCI_EXP_LNKCTL_LBMIE 0x0400 /* Link Bandwidth Management Interrupt Enable */ -#define PCI_EXP_LNKCTL_LABIE 0x0800 /* Lnk Autonomous Bandwidth Interrupt Enable */ +#define PCI_EXP_LNKCTL_LABIE 0x0800 /* Link Autonomous Bandwidth Interrupt Enable */ #define PCI_EXP_LNKSTA 18 /* Link Status */ #define PCI_EXP_LNKSTA_CLS 0x000f /* Current Link Speed */ -#define PCI_EXP_LNKSTA_CLS_2_5GB 0x01 /* Current Link Speed 2.5GT/s */ -#define PCI_EXP_LNKSTA_CLS_5_0GB 0x02 /* Current Link Speed 5.0GT/s */ -#define PCI_EXP_LNKSTA_NLW 0x03f0 /* Nogotiated Link Width */ +#define PCI_EXP_LNKSTA_CLS_2_5GB 0x0001 /* Current Link Speed 2.5GT/s */ +#define PCI_EXP_LNKSTA_CLS_5_0GB 0x0002 /* Current Link Speed 5.0GT/s */ +#define PCI_EXP_LNKSTA_CLS_8_0GB 0x0003 /* Current Link Speed 8.0GT/s */ +#define PCI_EXP_LNKSTA_NLW 0x03f0 /* Negotiated Link Width */ +#define PCI_EXP_LNKSTA_NLW_X1 0x0010 /* Current Link Width x1 */ +#define PCI_EXP_LNKSTA_NLW_X2 0x0020 /* Current Link Width x2 */ +#define PCI_EXP_LNKSTA_NLW_X4 0x0040 /* Current Link Width x4 */ +#define PCI_EXP_LNKSTA_NLW_X8 0x0080 /* Current Link Width x8 */ #define PCI_EXP_LNKSTA_NLW_SHIFT 4 /* start of NLW mask in link status */ #define PCI_EXP_LNKSTA_LT 0x0800 /* Link Training */ #define PCI_EXP_LNKSTA_SLC 0x1000 /* Slot Clock Configuration */ @@ -515,8 +523,16 @@ #define PCI_EXP_SLTCTL_CCIE 0x0010 /* Command Completed Interrupt Enable */ #define PCI_EXP_SLTCTL_HPIE 0x0020 /* Hot-Plug Interrupt Enable */ #define PCI_EXP_SLTCTL_AIC 0x00c0 /* Attention Indicator Control */ +#define PCI_EXP_SLTCTL_ATTN_IND_ON 0x0040 /* Attention Indicator on */ +#define PCI_EXP_SLTCTL_ATTN_IND_BLINK 0x0080 /* Attention Indicator blinking */ +#define PCI_EXP_SLTCTL_ATTN_IND_OFF 0x00c0 /* Attention Indicator off */ #define PCI_EXP_SLTCTL_PIC 0x0300 /* Power Indicator Control */ +#define PCI_EXP_SLTCTL_PWR_IND_ON 0x0100 /* Power Indicator on */ +#define PCI_EXP_SLTCTL_PWR_IND_BLINK 0x0200 /* Power Indicator blinking */ +#define PCI_EXP_SLTCTL_PWR_IND_OFF 0x0300 /* Power Indicator off */ #define PCI_EXP_SLTCTL_PCC 0x0400 /* Power Controller Control */ +#define PCI_EXP_SLTCTL_PWR_ON 0x0000 /* Power On */ +#define PCI_EXP_SLTCTL_PWR_OFF 0x0400 /* Power Off */ #define PCI_EXP_SLTCTL_EIC 0x0800 /* Electromechanical Interlock Control */ #define PCI_EXP_SLTCTL_DLLSCE 0x1000 /* Data Link Layer State Changed Enable */ #define PCI_EXP_SLTSTA 26 /* Slot Status */ @@ -530,44 +546,50 @@ #define PCI_EXP_SLTSTA_EIS 0x0080 /* Electromechanical Interlock Status */ #define PCI_EXP_SLTSTA_DLLSC 0x0100 /* Data Link Layer State Changed */ #define PCI_EXP_RTCTL 28 /* Root Control */ -#define PCI_EXP_RTCTL_SECEE 0x01 /* System Error on Correctable Error */ -#define PCI_EXP_RTCTL_SENFEE 0x02 /* System Error on Non-Fatal Error */ -#define PCI_EXP_RTCTL_SEFEE 0x04 /* System Error on Fatal Error */ -#define PCI_EXP_RTCTL_PMEIE 0x08 /* PME Interrupt Enable */ -#define PCI_EXP_RTCTL_CRSSVE 0x10 /* CRS Software Visibility Enable */ +#define PCI_EXP_RTCTL_SECEE 0x0001 /* System Error on Correctable Error */ +#define PCI_EXP_RTCTL_SENFEE 0x0002 /* System Error on Non-Fatal Error */ +#define PCI_EXP_RTCTL_SEFEE 0x0004 /* System Error on Fatal Error */ +#define PCI_EXP_RTCTL_PMEIE 0x0008 /* PME Interrupt Enable */ +#define PCI_EXP_RTCTL_CRSSVE 0x0010 /* CRS Software Visibility Enable */ #define PCI_EXP_RTCAP 30 /* Root Capabilities */ #define PCI_EXP_RTSTA 32 /* Root Status */ -#define PCI_EXP_RTSTA_PME 0x10000 /* PME status */ -#define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */ +#define PCI_EXP_RTSTA_PME 0x00010000 /* PME status */ +#define PCI_EXP_RTSTA_PENDING 0x00020000 /* PME pending */ /* - * Note that the following PCI Express 'Capability Structure' registers - * were introduced with 'Capability Version' 0x2 (v2). These registers - * do not exist on devices with Capability Version 1. Use pci_pcie_cap2() - * to use these fields safely. + * The Device Capabilities 2, Device Status 2, Device Control 2, + * Link Capabilities 2, Link Status 2, Link Control 2, + * Slot Capabilities 2, Slot Status 2, and Slot Control 2 registers + * are only present on devices with PCIe Capability version 2. + * Use pcie_capability_read_word() and similar interfaces to use them + * safely. */ #define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */ -#define PCI_EXP_DEVCAP2_ARI 0x20 /* Alternative Routing-ID */ -#define PCI_EXP_DEVCAP2_LTR 0x800 /* Latency tolerance reporting */ -#define PCI_EXP_OBFF_MASK 0xc0000 /* OBFF support mechanism */ -#define PCI_EXP_OBFF_MSG 0x40000 /* New message signaling */ -#define PCI_EXP_OBFF_WAKE 0x80000 /* Re-use WAKE# for OBFF */ +#define PCI_EXP_DEVCAP2_ARI 0x00000020 /* Alternative Routing-ID */ +#define PCI_EXP_DEVCAP2_LTR 0x00000800 /* Latency tolerance reporting */ +#define PCI_EXP_DEVCAP2_OBFF_MASK 0x000c0000 /* OBFF support mechanism */ +#define PCI_EXP_DEVCAP2_OBFF_MSG 0x00040000 /* New message signaling */ +#define PCI_EXP_DEVCAP2_OBFF_WAKE 0x00080000 /* Re-use WAKE# for OBFF */ #define PCI_EXP_DEVCTL2 40 /* Device Control 2 */ -#define PCI_EXP_DEVCTL2_ARI 0x20 /* Alternative Routing-ID */ -#define PCI_EXP_IDO_REQ_EN 0x100 /* ID-based ordering request enable */ -#define PCI_EXP_IDO_CMP_EN 0x200 /* ID-based ordering completion enable */ -#define PCI_EXP_LTR_EN 0x400 /* Latency tolerance reporting */ -#define PCI_EXP_OBFF_MSGA_EN 0x2000 /* OBFF enable with Message type A */ -#define PCI_EXP_OBFF_MSGB_EN 0x4000 /* OBFF enable with Message type B */ -#define PCI_EXP_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */ +#define PCI_EXP_DEVCTL2_COMP_TIMEOUT 0x000f /* Completion Timeout Value */ +#define PCI_EXP_DEVCTL2_ARI 0x0020 /* Alternative Routing-ID */ +#define PCI_EXP_DEVCTL2_IDO_REQ_EN 0x0100 /* Allow IDO for requests */ +#define PCI_EXP_DEVCTL2_IDO_CMP_EN 0x0200 /* Allow IDO for completions */ +#define PCI_EXP_DEVCTL2_LTR_EN 0x0400 /* Enable LTR mechanism */ +#define PCI_EXP_DEVCTL2_OBFF_MSGA_EN 0x2000 /* Enable OBFF Message type A */ +#define PCI_EXP_DEVCTL2_OBFF_MSGB_EN 0x4000 /* Enable OBFF Message type B */ +#define PCI_EXP_DEVCTL2_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */ +#define PCI_EXP_DEVSTA2 42 /* Device Status 2 */ #define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 44 /* v2 endpoints end here */ -#define PCI_EXP_LNKCAP2 44 /* Link Capability 2 */ -#define PCI_EXP_LNKCAP2_SLS_2_5GB 0x02 /* Supported Link Speed 2.5GT/s */ -#define PCI_EXP_LNKCAP2_SLS_5_0GB 0x04 /* Supported Link Speed 5.0GT/s */ -#define PCI_EXP_LNKCAP2_SLS_8_0GB 0x08 /* Supported Link Speed 8.0GT/s */ -#define PCI_EXP_LNKCAP2_CROSSLINK 0x100 /* Crosslink supported */ +#define PCI_EXP_LNKCAP2 44 /* Link Capabilities 2 */ +#define PCI_EXP_LNKCAP2_SLS_2_5GB 0x00000002 /* Supported Speed 2.5GT/s */ +#define PCI_EXP_LNKCAP2_SLS_5_0GB 0x00000004 /* Supported Speed 5.0GT/s */ +#define PCI_EXP_LNKCAP2_SLS_8_0GB 0x00000008 /* Supported Speed 8.0GT/s */ +#define PCI_EXP_LNKCAP2_CROSSLINK 0x00000100 /* Crosslink supported */ #define PCI_EXP_LNKCTL2 48 /* Link Control 2 */ #define PCI_EXP_LNKSTA2 50 /* Link Status 2 */ +#define PCI_EXP_SLTCAP2 52 /* Slot Capabilities 2 */ #define PCI_EXP_SLTCTL2 56 /* Slot Control 2 */ +#define PCI_EXP_SLTSTA2 58 /* Slot Status 2 */ /* Extended Capabilities (PCI-X 2.0 and Express) */ #define PCI_EXT_CAP_ID(header) (header & 0x0000ffff) @@ -584,7 +606,7 @@ #define PCI_EXT_CAP_ID_MFVC 0x08 /* Multi-Function VC Capability */ #define PCI_EXT_CAP_ID_VC9 0x09 /* same as _VC */ #define PCI_EXT_CAP_ID_RCRB 0x0A /* Root Complex RB? */ -#define PCI_EXT_CAP_ID_VNDR 0x0B /* Vendor Specific */ +#define PCI_EXT_CAP_ID_VNDR 0x0B /* Vendor-Specific */ #define PCI_EXT_CAP_ID_CAC 0x0C /* Config Access - obsolete */ #define PCI_EXT_CAP_ID_ACS 0x0D /* Access Control Services */ #define PCI_EXT_CAP_ID_ARI 0x0E /* Alternate Routing ID */ @@ -593,12 +615,12 @@ #define PCI_EXT_CAP_ID_MRIOV 0x11 /* Multi Root I/O Virtualization */ #define PCI_EXT_CAP_ID_MCAST 0x12 /* Multicast */ #define PCI_EXT_CAP_ID_PRI 0x13 /* Page Request Interface */ -#define PCI_EXT_CAP_ID_AMD_XXX 0x14 /* reserved for AMD */ -#define PCI_EXT_CAP_ID_REBAR 0x15 /* resizable BAR */ -#define PCI_EXT_CAP_ID_DPA 0x16 /* dynamic power alloc */ -#define PCI_EXT_CAP_ID_TPH 0x17 /* TPH request */ -#define PCI_EXT_CAP_ID_LTR 0x18 /* latency tolerance reporting */ -#define PCI_EXT_CAP_ID_SECPCI 0x19 /* Secondary PCIe */ +#define PCI_EXT_CAP_ID_AMD_XXX 0x14 /* Reserved for AMD */ +#define PCI_EXT_CAP_ID_REBAR 0x15 /* Resizable BAR */ +#define PCI_EXT_CAP_ID_DPA 0x16 /* Dynamic Power Allocation */ +#define PCI_EXT_CAP_ID_TPH 0x17 /* TPH Requester */ +#define PCI_EXT_CAP_ID_LTR 0x18 /* Latency Tolerance Reporting */ +#define PCI_EXT_CAP_ID_SECPCI 0x19 /* Secondary PCIe Capability */ #define PCI_EXT_CAP_ID_PMUX 0x1A /* Protocol Multiplexing */ #define PCI_EXT_CAP_ID_PASID 0x1B /* Process Address Space ID */ #define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_PASID @@ -658,9 +680,9 @@ #define PCI_ERR_ROOT_COR_RCV 0x00000001 /* ERR_COR Received */ /* Multi ERR_COR Received */ #define PCI_ERR_ROOT_MULTI_COR_RCV 0x00000002 -/* ERR_FATAL/NONFATAL Recevied */ +/* ERR_FATAL/NONFATAL Received */ #define PCI_ERR_ROOT_UNCOR_RCV 0x00000004 -/* Multi ERR_FATAL/NONFATAL Recevied */ +/* Multi ERR_FATAL/NONFATAL Received */ #define PCI_ERR_ROOT_MULTI_UNCOR_RCV 0x00000008 #define PCI_ERR_ROOT_FIRST_FATAL 0x00000010 /* First Fatal */ #define PCI_ERR_ROOT_NONFATAL_RCV 0x00000020 /* Non-Fatal Received */ @@ -668,17 +690,34 @@ #define PCI_ERR_ROOT_ERR_SRC 52 /* Error Source Identification */ /* Virtual Channel */ -#define PCI_VC_PORT_REG1 4 -#define PCI_VC_REG1_EVCC 0x7 /* extended vc count */ -#define PCI_VC_PORT_REG2 8 -#define PCI_VC_REG2_32_PHASE 0x2 -#define PCI_VC_REG2_64_PHASE 0x4 -#define PCI_VC_REG2_128_PHASE 0x8 +#define PCI_VC_PORT_CAP1 4 +#define PCI_VC_CAP1_EVCC 0x00000007 /* extended VC count */ +#define PCI_VC_CAP1_LPEVCC 0x00000070 /* low prio extended VC count */ +#define PCI_VC_CAP1_ARB_SIZE 0x00000c00 +#define PCI_VC_PORT_CAP2 8 +#define PCI_VC_CAP2_32_PHASE 0x00000002 +#define PCI_VC_CAP2_64_PHASE 0x00000004 +#define PCI_VC_CAP2_128_PHASE 0x00000008 +#define PCI_VC_CAP2_ARB_OFF 0xff000000 #define PCI_VC_PORT_CTRL 12 +#define PCI_VC_PORT_CTRL_LOAD_TABLE 0x00000001 #define PCI_VC_PORT_STATUS 14 +#define PCI_VC_PORT_STATUS_TABLE 0x00000001 #define PCI_VC_RES_CAP 16 +#define PCI_VC_RES_CAP_32_PHASE 0x00000002 +#define PCI_VC_RES_CAP_64_PHASE 0x00000004 +#define PCI_VC_RES_CAP_128_PHASE 0x00000008 +#define PCI_VC_RES_CAP_128_PHASE_TB 0x00000010 +#define PCI_VC_RES_CAP_256_PHASE 0x00000020 +#define PCI_VC_RES_CAP_ARB_OFF 0xff000000 #define PCI_VC_RES_CTRL 20 +#define PCI_VC_RES_CTRL_LOAD_TABLE 0x00010000 +#define PCI_VC_RES_CTRL_ARB_SELECT 0x000e0000 +#define PCI_VC_RES_CTRL_ID 0x07000000 +#define PCI_VC_RES_CTRL_ENABLE 0x80000000 #define PCI_VC_RES_STATUS 26 +#define PCI_VC_RES_STATUS_TABLE 0x00000001 +#define PCI_VC_RES_STATUS_NEGO 0x00000002 #define PCI_CAP_VC_BASE_SIZEOF 0x10 #define PCI_CAP_VC_PER_VC_SIZEOF 0x0C @@ -702,7 +741,7 @@ #define PCI_VNDR_HEADER_LEN(x) (((x) >> 20) & 0xfff) /* - * Hypertransport sub capability types + * HyperTransport sub capability types * * Unfortunately there are both 3 bit and 5 bit capability types defined * in the HT spec, catering for that is a little messy. You probably don't @@ -730,8 +769,8 @@ #define HT_CAPTYPE_DIRECT_ROUTE 0xB0 /* Direct routing configuration */ #define HT_CAPTYPE_VCSET 0xB8 /* Virtual Channel configuration */ #define HT_CAPTYPE_ERROR_RETRY 0xC0 /* Retry on error configuration */ -#define HT_CAPTYPE_GEN3 0xD0 /* Generation 3 hypertransport configuration */ -#define HT_CAPTYPE_PM 0xE0 /* Hypertransport powermanagement configuration */ +#define HT_CAPTYPE_GEN3 0xD0 /* Generation 3 HyperTransport configuration */ +#define HT_CAPTYPE_PM 0xE0 /* HyperTransport power management configuration */ #define HT_CAP_SIZEOF_LONG 28 /* slave & primary */ #define HT_CAP_SIZEOF_SHORT 24 /* host & secondary */ @@ -768,14 +807,14 @@ #define PCI_PRI_ALLOC_REQ 0x0c /* PRI max reqs allowed */ #define PCI_EXT_CAP_PRI_SIZEOF 16 -/* PASID capability */ +/* Process Address Space ID */ #define PCI_PASID_CAP 0x04 /* PASID feature register */ #define PCI_PASID_CAP_EXEC 0x02 /* Exec permissions Supported */ -#define PCI_PASID_CAP_PRIV 0x04 /* Priviledge Mode Supported */ +#define PCI_PASID_CAP_PRIV 0x04 /* Privilege Mode Supported */ #define PCI_PASID_CTRL 0x06 /* PASID control register */ #define PCI_PASID_CTRL_ENABLE 0x01 /* Enable bit */ #define PCI_PASID_CTRL_EXEC 0x02 /* Exec permissions Enable */ -#define PCI_PASID_CTRL_PRIV 0x04 /* Priviledge Mode Enable */ +#define PCI_PASID_CTRL_PRIV 0x04 /* Privilege Mode Enable */ #define PCI_EXT_CAP_PASID_SIZEOF 8 /* Single Root I/O Virtualization */ @@ -830,22 +869,22 @@ #define PCI_ACS_CTRL 0x06 /* ACS Control Register */ #define PCI_ACS_EGRESS_CTL_V 0x08 /* ACS Egress Control Vector */ -#define PCI_VSEC_HDR 4 /* extended cap - vendor specific */ +#define PCI_VSEC_HDR 4 /* extended cap - vendor-specific */ #define PCI_VSEC_HDR_LEN_SHIFT 20 /* shift for length field */ -/* sata capability */ +/* SATA capability */ #define PCI_SATA_REGS 4 /* SATA REGs specifier */ #define PCI_SATA_REGS_MASK 0xF /* location - BAR#/inline */ #define PCI_SATA_REGS_INLINE 0xF /* REGS in config space */ #define PCI_SATA_SIZEOF_SHORT 8 #define PCI_SATA_SIZEOF_LONG 16 -/* resizable BARs */ +/* Resizable BARs */ #define PCI_REBAR_CTRL 8 /* control register */ #define PCI_REBAR_CTRL_NBAR_MASK (7 << 5) /* mask for # bars */ #define PCI_REBAR_CTRL_NBAR_SHIFT 5 /* shift for # bars */ -/* dynamic power allocation */ +/* Dynamic Power Allocation */ #define PCI_DPA_CAP 4 /* capability register */ #define PCI_DPA_CAP_SUBSTATE_MASK 0x1F /* # substates - 1 */ #define PCI_DPA_BASE_SIZEOF 16 /* size with 0 substates */ diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h index 4f63c05d27c..9269de25487 100644 --- a/include/uapi/linux/perf_event.h +++ b/include/uapi/linux/perf_event.h @@ -109,6 +109,7 @@ enum perf_sw_ids { PERF_COUNT_SW_PAGE_FAULTS_MAJ = 6, PERF_COUNT_SW_ALIGNMENT_FAULTS = 7, PERF_COUNT_SW_EMULATION_FAULTS = 8, + PERF_COUNT_SW_DUMMY = 9, PERF_COUNT_SW_MAX, /* non-ABI */ }; @@ -132,8 +133,12 @@ enum perf_event_sample_format { PERF_SAMPLE_BRANCH_STACK = 1U << 11, PERF_SAMPLE_REGS_USER = 1U << 12, PERF_SAMPLE_STACK_USER = 1U << 13, + PERF_SAMPLE_WEIGHT = 1U << 14, + PERF_SAMPLE_DATA_SRC = 1U << 15, + PERF_SAMPLE_IDENTIFIER = 1U << 16, + PERF_SAMPLE_TRANSACTION = 1U << 17, - PERF_SAMPLE_MAX = 1U << 14, /* non-ABI */ + PERF_SAMPLE_MAX = 1U << 18, /* non-ABI */ }; /* @@ -155,8 +160,12 @@ enum perf_branch_sample_type { PERF_SAMPLE_BRANCH_ANY_CALL = 1U << 4, /* any call branch */ PERF_SAMPLE_BRANCH_ANY_RETURN = 1U << 5, /* any return branch */ PERF_SAMPLE_BRANCH_IND_CALL = 1U << 6, /* indirect calls */ + PERF_SAMPLE_BRANCH_ABORT_TX = 1U << 7, /* transaction aborts */ + PERF_SAMPLE_BRANCH_IN_TX = 1U << 8, /* in transaction */ + PERF_SAMPLE_BRANCH_NO_TX = 1U << 9, /* not in transaction */ + PERF_SAMPLE_BRANCH_COND = 1U << 10, /* conditional branches */ - PERF_SAMPLE_BRANCH_MAX = 1U << 7, /* non-ABI */ + PERF_SAMPLE_BRANCH_MAX = 1U << 11, /* non-ABI */ }; #define PERF_SAMPLE_BRANCH_PLM_ALL \ @@ -174,6 +183,28 @@ enum perf_sample_regs_abi { }; /* + * Values for the memory transaction event qualifier, mostly for + * abort events. Multiple bits can be set. + */ +enum { + PERF_TXN_ELISION = (1 << 0), /* From elision */ + PERF_TXN_TRANSACTION = (1 << 1), /* From transaction */ + PERF_TXN_SYNC = (1 << 2), /* Instruction is related */ + PERF_TXN_ASYNC = (1 << 3), /* Instruction not related */ + PERF_TXN_RETRY = (1 << 4), /* Retry possible */ + PERF_TXN_CONFLICT = (1 << 5), /* Conflict abort */ + PERF_TXN_CAPACITY_WRITE = (1 << 6), /* Capacity write abort */ + PERF_TXN_CAPACITY_READ = (1 << 7), /* Capacity read abort */ + + PERF_TXN_MAX = (1 << 8), /* non-ABI */ + + /* bits 32..63 are reserved for the abort code */ + + PERF_TXN_ABORT_MASK = (0xffffffffULL << 32), + PERF_TXN_ABORT_SHIFT = 32, +}; + +/* * The format of the data returned by read() on a perf event fd, * as specified by attr.read_format: * @@ -270,8 +301,9 @@ struct perf_event_attr { exclude_callchain_kernel : 1, /* exclude kernel callchains */ exclude_callchain_user : 1, /* exclude user callchains */ - - __reserved_1 : 41; + mmap2 : 1, /* include mmap with inode data */ + comm_exec : 1, /* flag comm events that are due to an exec */ + __reserved_1 : 39; union { __u32 wakeup_events; /* wakeup every n events */ @@ -316,6 +348,7 @@ struct perf_event_attr { #define PERF_EVENT_IOC_PERIOD _IOW('$', 4, __u64) #define PERF_EVENT_IOC_SET_OUTPUT _IO ('$', 5) #define PERF_EVENT_IOC_SET_FILTER _IOW('$', 6, char *) +#define PERF_EVENT_IOC_ID _IOR('$', 7, __u64 *) enum perf_event_ioc_flags { PERF_IOC_FLAG_GROUP = 1U << 0, @@ -370,9 +403,15 @@ struct perf_event_mmap_page { __u64 time_running; /* time event on cpu */ union { __u64 capabilities; - __u64 cap_usr_time : 1, - cap_usr_rdpmc : 1, - cap_____res : 62; + struct { + __u64 cap_bit0 : 1, /* Always 0, deprecated, see commit 860f085b74e9 */ + cap_bit0_is_deprecated : 1, /* Always 1, signals that bit 0 is zero */ + + cap_user_rdpmc : 1, /* The RDPMC instruction can be used to read counts */ + cap_user_time : 1, /* The time_* fields are used */ + cap_user_time_zero : 1, /* The time_zero field is used */ + cap_____res : 59; + }; }; /* @@ -413,23 +452,43 @@ struct perf_event_mmap_page { __u16 time_shift; __u32 time_mult; __u64 time_offset; + /* + * If cap_usr_time_zero, the hardware clock (e.g. TSC) can be calculated + * from sample timestamps. + * + * time = timestamp - time_zero; + * quot = time / time_mult; + * rem = time % time_mult; + * cyc = (quot << time_shift) + (rem << time_shift) / time_mult; + * + * And vice versa: + * + * quot = cyc >> time_shift; + * rem = cyc & ((1 << time_shift) - 1); + * timestamp = time_zero + quot * time_mult + + * ((rem * time_mult) >> time_shift); + */ + __u64 time_zero; + __u32 size; /* Header size up to __reserved[] fields. */ /* * Hole for extension of the self monitor capabilities */ - __u64 __reserved[120]; /* align to 1k */ + __u8 __reserved[118*8+4]; /* align to 1k. */ /* * Control data for the mmap() data buffer. * - * User-space reading the @data_head value should issue an rmb(), on - * SMP capable platforms, after reading this value -- see - * perf_event_wakeup(). + * User-space reading the @data_head value should issue an smp_rmb(), + * after reading this value. * * When the mapping is PROT_WRITE the @data_tail value should be - * written by userspace to reflect the last read data. In this case - * the kernel will not over-write unread data. + * written by userspace to reflect the last read data, after issueing + * an smp_mb() to separate the data read from the ->data_tail store. + * In this case the kernel will not over-write unread data. + * + * See perf_output_put_handle() for the data ordering. */ __u64 data_head; /* head in the data section */ __u64 data_tail; /* user-space written tail */ @@ -444,6 +503,12 @@ struct perf_event_mmap_page { #define PERF_RECORD_MISC_GUEST_USER (5 << 0) /* + * PERF_RECORD_MISC_MMAP_DATA and PERF_RECORD_MISC_COMM_EXEC are used on + * different events so can reuse the same bit position. + */ +#define PERF_RECORD_MISC_MMAP_DATA (1 << 13) +#define PERF_RECORD_MISC_COMM_EXEC (1 << 13) +/* * Indicates that the content of PERF_SAMPLE_IP points to * the actual instruction that triggered the event. See also * perf_event_attr::precise_ip. @@ -465,13 +530,28 @@ enum perf_event_type { /* * If perf_event_attr.sample_id_all is set then all event types will * have the sample_type selected fields related to where/when - * (identity) an event took place (TID, TIME, ID, CPU, STREAM_ID) - * described in PERF_RECORD_SAMPLE below, it will be stashed just after - * the perf_event_header and the fields already present for the existing - * fields, i.e. at the end of the payload. That way a newer perf.data - * file will be supported by older perf tools, with these new optional - * fields being ignored. + * (identity) an event took place (TID, TIME, ID, STREAM_ID, CPU, + * IDENTIFIER) described in PERF_RECORD_SAMPLE below, it will be stashed + * just after the perf_event_header and the fields already present for + * the existing fields, i.e. at the end of the payload. That way a newer + * perf.data file will be supported by older perf tools, with these new + * optional fields being ignored. + * + * struct sample_id { + * { u32 pid, tid; } && PERF_SAMPLE_TID + * { u64 time; } && PERF_SAMPLE_TIME + * { u64 id; } && PERF_SAMPLE_ID + * { u64 stream_id;} && PERF_SAMPLE_STREAM_ID + * { u32 cpu, res; } && PERF_SAMPLE_CPU + * { u64 id; } && PERF_SAMPLE_IDENTIFIER + * } && perf_event_attr::sample_id_all * + * Note that PERF_SAMPLE_IDENTIFIER duplicates PERF_SAMPLE_ID. The + * advantage of PERF_SAMPLE_IDENTIFIER is that its position is fixed + * relative to header.size. + */ + + /* * The MMAP events record the PROT_EXEC mappings so that we can * correlate userspace IPs to code. They have the following structure: * @@ -483,6 +563,7 @@ enum perf_event_type { * u64 len; * u64 pgoff; * char filename[]; + * struct sample_id sample_id; * }; */ PERF_RECORD_MMAP = 1, @@ -492,6 +573,7 @@ enum perf_event_type { * struct perf_event_header header; * u64 id; * u64 lost; + * struct sample_id sample_id; * }; */ PERF_RECORD_LOST = 2, @@ -502,6 +584,7 @@ enum perf_event_type { * * u32 pid, tid; * char comm[]; + * struct sample_id sample_id; * }; */ PERF_RECORD_COMM = 3, @@ -512,6 +595,7 @@ enum perf_event_type { * u32 pid, ppid; * u32 tid, ptid; * u64 time; + * struct sample_id sample_id; * }; */ PERF_RECORD_EXIT = 4, @@ -522,6 +606,7 @@ enum perf_event_type { * u64 time; * u64 id; * u64 stream_id; + * struct sample_id sample_id; * }; */ PERF_RECORD_THROTTLE = 5, @@ -533,6 +618,7 @@ enum perf_event_type { * u32 pid, ppid; * u32 tid, ptid; * u64 time; + * struct sample_id sample_id; * }; */ PERF_RECORD_FORK = 7, @@ -543,6 +629,7 @@ enum perf_event_type { * u32 pid, tid; * * struct read_format values; + * struct sample_id sample_id; * }; */ PERF_RECORD_READ = 8, @@ -551,6 +638,13 @@ enum perf_event_type { * struct { * struct perf_event_header header; * + * # + * # Note that PERF_SAMPLE_IDENTIFIER duplicates PERF_SAMPLE_ID. + * # The advantage of PERF_SAMPLE_IDENTIFIER is that its position + * # is fixed relative to header. + * # + * + * { u64 id; } && PERF_SAMPLE_IDENTIFIER * { u64 ip; } && PERF_SAMPLE_IP * { u32 pid, tid; } && PERF_SAMPLE_TID * { u64 time; } && PERF_SAMPLE_TIME @@ -579,7 +673,8 @@ enum perf_event_type { * { u32 size; * char data[size];}&& PERF_SAMPLE_RAW * - * { u64 from, to, flags } lbr[nr];} && PERF_SAMPLE_BRANCH_STACK + * { u64 nr; + * { u64 from, to, flags } lbr[nr];} && PERF_SAMPLE_BRANCH_STACK * * { u64 abi; # enum perf_sample_regs_abi * u64 regs[weight(mask)]; } && PERF_SAMPLE_REGS_USER @@ -587,10 +682,36 @@ enum perf_event_type { * { u64 size; * char data[size]; * u64 dyn_size; } && PERF_SAMPLE_STACK_USER + * + * { u64 weight; } && PERF_SAMPLE_WEIGHT + * { u64 data_src; } && PERF_SAMPLE_DATA_SRC + * { u64 transaction; } && PERF_SAMPLE_TRANSACTION * }; */ PERF_RECORD_SAMPLE = 9, + /* + * The MMAP2 records are an augmented version of MMAP, they add + * maj, min, ino numbers to be used to uniquely identify each mapping + * + * struct { + * struct perf_event_header header; + * + * u32 pid, tid; + * u64 addr; + * u64 len; + * u64 pgoff; + * u32 maj; + * u32 min; + * u64 ino; + * u64 ino_generation; + * u32 prot, flags; + * char filename[]; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_MMAP2 = 10, + PERF_RECORD_MAX, /* non-ABI */ }; @@ -608,8 +729,96 @@ enum perf_callchain_context { PERF_CONTEXT_MAX = (__u64)-4095, }; -#define PERF_FLAG_FD_NO_GROUP (1U << 0) -#define PERF_FLAG_FD_OUTPUT (1U << 1) -#define PERF_FLAG_PID_CGROUP (1U << 2) /* pid=cgroup id, per-cpu mode only */ +#define PERF_FLAG_FD_NO_GROUP (1UL << 0) +#define PERF_FLAG_FD_OUTPUT (1UL << 1) +#define PERF_FLAG_PID_CGROUP (1UL << 2) /* pid=cgroup id, per-cpu mode only */ +#define PERF_FLAG_FD_CLOEXEC (1UL << 3) /* O_CLOEXEC */ + +union perf_mem_data_src { + __u64 val; + struct { + __u64 mem_op:5, /* type of opcode */ + mem_lvl:14, /* memory hierarchy level */ + mem_snoop:5, /* snoop mode */ + mem_lock:2, /* lock instr */ + mem_dtlb:7, /* tlb access */ + mem_rsvd:31; + }; +}; + +/* type of opcode (load/store/prefetch,code) */ +#define PERF_MEM_OP_NA 0x01 /* not available */ +#define PERF_MEM_OP_LOAD 0x02 /* load instruction */ +#define PERF_MEM_OP_STORE 0x04 /* store instruction */ +#define PERF_MEM_OP_PFETCH 0x08 /* prefetch */ +#define PERF_MEM_OP_EXEC 0x10 /* code (execution) */ +#define PERF_MEM_OP_SHIFT 0 + +/* memory hierarchy (memory level, hit or miss) */ +#define PERF_MEM_LVL_NA 0x01 /* not available */ +#define PERF_MEM_LVL_HIT 0x02 /* hit level */ +#define PERF_MEM_LVL_MISS 0x04 /* miss level */ +#define PERF_MEM_LVL_L1 0x08 /* L1 */ +#define PERF_MEM_LVL_LFB 0x10 /* Line Fill Buffer */ +#define PERF_MEM_LVL_L2 0x20 /* L2 */ +#define PERF_MEM_LVL_L3 0x40 /* L3 */ +#define PERF_MEM_LVL_LOC_RAM 0x80 /* Local DRAM */ +#define PERF_MEM_LVL_REM_RAM1 0x100 /* Remote DRAM (1 hop) */ +#define PERF_MEM_LVL_REM_RAM2 0x200 /* Remote DRAM (2 hops) */ +#define PERF_MEM_LVL_REM_CCE1 0x400 /* Remote Cache (1 hop) */ +#define PERF_MEM_LVL_REM_CCE2 0x800 /* Remote Cache (2 hops) */ +#define PERF_MEM_LVL_IO 0x1000 /* I/O memory */ +#define PERF_MEM_LVL_UNC 0x2000 /* Uncached memory */ +#define PERF_MEM_LVL_SHIFT 5 + +/* snoop mode */ +#define PERF_MEM_SNOOP_NA 0x01 /* not available */ +#define PERF_MEM_SNOOP_NONE 0x02 /* no snoop */ +#define PERF_MEM_SNOOP_HIT 0x04 /* snoop hit */ +#define PERF_MEM_SNOOP_MISS 0x08 /* snoop miss */ +#define PERF_MEM_SNOOP_HITM 0x10 /* snoop hit modified */ +#define PERF_MEM_SNOOP_SHIFT 19 + +/* locked instruction */ +#define PERF_MEM_LOCK_NA 0x01 /* not available */ +#define PERF_MEM_LOCK_LOCKED 0x02 /* locked transaction */ +#define PERF_MEM_LOCK_SHIFT 24 + +/* TLB access */ +#define PERF_MEM_TLB_NA 0x01 /* not available */ +#define PERF_MEM_TLB_HIT 0x02 /* hit level */ +#define PERF_MEM_TLB_MISS 0x04 /* miss level */ +#define PERF_MEM_TLB_L1 0x08 /* L1 */ +#define PERF_MEM_TLB_L2 0x10 /* L2 */ +#define PERF_MEM_TLB_WK 0x20 /* Hardware Walker*/ +#define PERF_MEM_TLB_OS 0x40 /* OS fault handler */ +#define PERF_MEM_TLB_SHIFT 26 + +#define PERF_MEM_S(a, s) \ + (((__u64)PERF_MEM_##a##_##s) << PERF_MEM_##a##_SHIFT) + +/* + * single taken branch record layout: + * + * from: source instruction (may not always be a branch insn) + * to: branch target + * mispred: branch target was mispredicted + * predicted: branch target was predicted + * + * support for mispred, predicted is optional. In case it + * is not supported mispred = predicted = 0. + * + * in_tx: running in a hardware transaction + * abort: aborting a hardware transaction + */ +struct perf_branch_entry { + __u64 from; + __u64 to; + __u64 mispred:1, /* target mispredicted */ + predicted:1,/* target predicted */ + in_tx:1, /* in transaction */ + abort:1, /* transaction abort */ + reserved:60; +}; #endif /* _UAPI_LINUX_PERF_EVENT_H */ diff --git a/include/uapi/linux/pfkeyv2.h b/include/uapi/linux/pfkeyv2.h index 0b80c806631..ada7f0171cc 100644 --- a/include/uapi/linux/pfkeyv2.h +++ b/include/uapi/linux/pfkeyv2.h @@ -235,6 +235,18 @@ struct sadb_x_kmaddress { } __attribute__((packed)); /* sizeof(struct sadb_x_kmaddress) == 8 */ +/* To specify the SA dump filter */ +struct sadb_x_filter { + __u16 sadb_x_filter_len; + __u16 sadb_x_filter_exttype; + __u32 sadb_x_filter_saddr[4]; + __u32 sadb_x_filter_daddr[4]; + __u16 sadb_x_filter_family; + __u8 sadb_x_filter_splen; + __u8 sadb_x_filter_dplen; +} __attribute__((packed)); +/* sizeof(struct sadb_x_filter) == 40 */ + /* Message types */ #define SADB_RESERVED 0 #define SADB_GETSPI 1 @@ -358,7 +370,8 @@ struct sadb_x_kmaddress { #define SADB_X_EXT_SEC_CTX 24 /* Used with MIGRATE to pass @ to IKE for negotiation */ #define SADB_X_EXT_KMADDRESS 25 -#define SADB_EXT_MAX 25 +#define SADB_X_EXT_FILTER 26 +#define SADB_EXT_MAX 26 /* Identity Extension values */ #define SADB_IDENTTYPE_RESERVED 0 diff --git a/include/uapi/linux/pkt_cls.h b/include/uapi/linux/pkt_cls.h index 082eafaf026..25731dfb3fc 100644 --- a/include/uapi/linux/pkt_cls.h +++ b/include/uapi/linux/pkt_cls.h @@ -388,6 +388,20 @@ enum { #define TCA_CGROUP_MAX (__TCA_CGROUP_MAX - 1) +/* BPF classifier */ + +enum { + TCA_BPF_UNSPEC, + TCA_BPF_ACT, + TCA_BPF_POLICE, + TCA_BPF_CLASSID, + TCA_BPF_OPS_LEN, + TCA_BPF_OPS, + __TCA_BPF_MAX, +}; + +#define TCA_BPF_MAX (__TCA_BPF_MAX - 1) + /* Extended Matches */ struct tcf_ematch_tree_hdr { diff --git a/include/uapi/linux/pkt_sched.h b/include/uapi/linux/pkt_sched.h index 32aef0a439e..d62316baae9 100644 --- a/include/uapi/linux/pkt_sched.h +++ b/include/uapi/linux/pkt_sched.h @@ -73,9 +73,17 @@ struct tc_estimator { #define TC_H_ROOT (0xFFFFFFFFU) #define TC_H_INGRESS (0xFFFFFFF1U) +/* Need to corrospond to iproute2 tc/tc_core.h "enum link_layer" */ +enum tc_link_layer { + TC_LINKLAYER_UNAWARE, /* Indicate unaware old iproute2 util */ + TC_LINKLAYER_ETHERNET, + TC_LINKLAYER_ATM, +}; +#define TC_LINKLAYER_MASK 0x0F /* limit use to lower 4 bits */ + struct tc_ratespec { unsigned char cell_log; - unsigned char __reserved; + __u8 linklayer; /* lower 4 bits */ unsigned short overhead; short cell_align; unsigned short mpu; @@ -163,6 +171,10 @@ enum { TCA_TBF_PARMS, TCA_TBF_RTAB, TCA_TBF_PTAB, + TCA_TBF_RATE64, + TCA_TBF_PRATE64, + TCA_TBF_BURST, + TCA_TBF_PBURST, __TCA_TBF_MAX, }; @@ -348,6 +360,9 @@ enum { TCA_HTB_INIT, TCA_HTB_CTAB, TCA_HTB_RTAB, + TCA_HTB_DIRECT_QLEN, + TCA_HTB_RATE64, + TCA_HTB_CEIL64, __TCA_HTB_MAX, }; @@ -510,6 +525,7 @@ enum { TCA_NETEM_LOSS, TCA_NETEM_RATE, TCA_NETEM_ECN, + TCA_NETEM_RATE64, __TCA_NETEM_MAX, }; @@ -735,4 +751,96 @@ struct tc_fq_codel_xstats { }; }; +/* FQ */ + +enum { + TCA_FQ_UNSPEC, + + TCA_FQ_PLIMIT, /* limit of total number of packets in queue */ + + TCA_FQ_FLOW_PLIMIT, /* limit of packets per flow */ + + TCA_FQ_QUANTUM, /* RR quantum */ + + TCA_FQ_INITIAL_QUANTUM, /* RR quantum for new flow */ + + TCA_FQ_RATE_ENABLE, /* enable/disable rate limiting */ + + TCA_FQ_FLOW_DEFAULT_RATE,/* obsolete, do not use */ + + TCA_FQ_FLOW_MAX_RATE, /* per flow max rate */ + + TCA_FQ_BUCKETS_LOG, /* log2(number of buckets) */ + + TCA_FQ_FLOW_REFILL_DELAY, /* flow credit refill delay in usec */ + + __TCA_FQ_MAX +}; + +#define TCA_FQ_MAX (__TCA_FQ_MAX - 1) + +struct tc_fq_qd_stats { + __u64 gc_flows; + __u64 highprio_packets; + __u64 tcp_retrans; + __u64 throttled; + __u64 flows_plimit; + __u64 pkts_too_long; + __u64 allocation_errors; + __s64 time_next_delayed_flow; + __u32 flows; + __u32 inactive_flows; + __u32 throttled_flows; + __u32 pad; +}; + +/* Heavy-Hitter Filter */ + +enum { + TCA_HHF_UNSPEC, + TCA_HHF_BACKLOG_LIMIT, + TCA_HHF_QUANTUM, + TCA_HHF_HH_FLOWS_LIMIT, + TCA_HHF_RESET_TIMEOUT, + TCA_HHF_ADMIT_BYTES, + TCA_HHF_EVICT_TIMEOUT, + TCA_HHF_NON_HH_WEIGHT, + __TCA_HHF_MAX +}; + +#define TCA_HHF_MAX (__TCA_HHF_MAX - 1) + +struct tc_hhf_xstats { + __u32 drop_overlimit; /* number of times max qdisc packet limit + * was hit + */ + __u32 hh_overlimit; /* number of times max heavy-hitters was hit */ + __u32 hh_tot_count; /* number of captured heavy-hitters so far */ + __u32 hh_cur_count; /* number of current heavy-hitters */ +}; + +/* PIE */ +enum { + TCA_PIE_UNSPEC, + TCA_PIE_TARGET, + TCA_PIE_LIMIT, + TCA_PIE_TUPDATE, + TCA_PIE_ALPHA, + TCA_PIE_BETA, + TCA_PIE_ECN, + TCA_PIE_BYTEMODE, + __TCA_PIE_MAX +}; +#define TCA_PIE_MAX (__TCA_PIE_MAX - 1) + +struct tc_pie_xstats { + __u32 prob; /* current probability */ + __u32 delay; /* current delay in ms */ + __u32 avg_dq_rate; /* current average dq_rate in bits/pie_time */ + __u32 packets_in; /* total number of packets enqueued */ + __u32 dropped; /* packets dropped due to pie_action */ + __u32 overlimit; /* dropped due to lack of space in queue */ + __u32 maxq; /* maximum queue size */ + __u32 ecn_mark; /* packets marked with ecn*/ +}; #endif diff --git a/include/uapi/linux/ppp-ioctl.h b/include/uapi/linux/ppp-ioctl.h index 2d9a8859550..63a23a3b8bb 100644 --- a/include/uapi/linux/ppp-ioctl.h +++ b/include/uapi/linux/ppp-ioctl.h @@ -12,6 +12,7 @@ #include <linux/types.h> #include <linux/compiler.h> +#include <linux/ppp_defs.h> /* * Bit definitions for flags argument to PPPIOCGFLAGS/PPPIOCSFLAGS. diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h index 289760f424a..58afc04c107 100644 --- a/include/uapi/linux/prctl.h +++ b/include/uapi/linux/prctl.h @@ -149,4 +149,7 @@ #define PR_GET_TID_ADDRESS 40 +#define PR_SET_THP_DISABLE 41 +#define PR_GET_THP_DISABLE 42 + #endif /* _LINUX_PRCTL_H */ diff --git a/include/uapi/linux/psci.h b/include/uapi/linux/psci.h new file mode 100644 index 00000000000..310d83e0a91 --- /dev/null +++ b/include/uapi/linux/psci.h @@ -0,0 +1,90 @@ +/* + * ARM Power State and Coordination Interface (PSCI) header + * + * This header holds common PSCI defines and macros shared + * by: ARM kernel, ARM64 kernel, KVM ARM/ARM64 and user space. + * + * Copyright (C) 2014 Linaro Ltd. + * Author: Anup Patel <anup.patel@linaro.org> + */ + +#ifndef _UAPI_LINUX_PSCI_H +#define _UAPI_LINUX_PSCI_H + +/* + * PSCI v0.1 interface + * + * The PSCI v0.1 function numbers are implementation defined. + * + * Only PSCI return values such as: SUCCESS, NOT_SUPPORTED, + * INVALID_PARAMS, and DENIED defined below are applicable + * to PSCI v0.1. + */ + +/* PSCI v0.2 interface */ +#define PSCI_0_2_FN_BASE 0x84000000 +#define PSCI_0_2_FN(n) (PSCI_0_2_FN_BASE + (n)) +#define PSCI_0_2_64BIT 0x40000000 +#define PSCI_0_2_FN64_BASE \ + (PSCI_0_2_FN_BASE + PSCI_0_2_64BIT) +#define PSCI_0_2_FN64(n) (PSCI_0_2_FN64_BASE + (n)) + +#define PSCI_0_2_FN_PSCI_VERSION PSCI_0_2_FN(0) +#define PSCI_0_2_FN_CPU_SUSPEND PSCI_0_2_FN(1) +#define PSCI_0_2_FN_CPU_OFF PSCI_0_2_FN(2) +#define PSCI_0_2_FN_CPU_ON PSCI_0_2_FN(3) +#define PSCI_0_2_FN_AFFINITY_INFO PSCI_0_2_FN(4) +#define PSCI_0_2_FN_MIGRATE PSCI_0_2_FN(5) +#define PSCI_0_2_FN_MIGRATE_INFO_TYPE PSCI_0_2_FN(6) +#define PSCI_0_2_FN_MIGRATE_INFO_UP_CPU PSCI_0_2_FN(7) +#define PSCI_0_2_FN_SYSTEM_OFF PSCI_0_2_FN(8) +#define PSCI_0_2_FN_SYSTEM_RESET PSCI_0_2_FN(9) + +#define PSCI_0_2_FN64_CPU_SUSPEND PSCI_0_2_FN64(1) +#define PSCI_0_2_FN64_CPU_ON PSCI_0_2_FN64(3) +#define PSCI_0_2_FN64_AFFINITY_INFO PSCI_0_2_FN64(4) +#define PSCI_0_2_FN64_MIGRATE PSCI_0_2_FN64(5) +#define PSCI_0_2_FN64_MIGRATE_INFO_UP_CPU PSCI_0_2_FN64(7) + +/* PSCI v0.2 power state encoding for CPU_SUSPEND function */ +#define PSCI_0_2_POWER_STATE_ID_MASK 0xffff +#define PSCI_0_2_POWER_STATE_ID_SHIFT 0 +#define PSCI_0_2_POWER_STATE_TYPE_SHIFT 16 +#define PSCI_0_2_POWER_STATE_TYPE_MASK \ + (0x1 << PSCI_0_2_POWER_STATE_TYPE_SHIFT) +#define PSCI_0_2_POWER_STATE_AFFL_SHIFT 24 +#define PSCI_0_2_POWER_STATE_AFFL_MASK \ + (0x3 << PSCI_0_2_POWER_STATE_AFFL_SHIFT) + +/* PSCI v0.2 affinity level state returned by AFFINITY_INFO */ +#define PSCI_0_2_AFFINITY_LEVEL_ON 0 +#define PSCI_0_2_AFFINITY_LEVEL_OFF 1 +#define PSCI_0_2_AFFINITY_LEVEL_ON_PENDING 2 + +/* PSCI v0.2 multicore support in Trusted OS returned by MIGRATE_INFO_TYPE */ +#define PSCI_0_2_TOS_UP_MIGRATE 0 +#define PSCI_0_2_TOS_UP_NO_MIGRATE 1 +#define PSCI_0_2_TOS_MP 2 + +/* PSCI version decoding (independent of PSCI version) */ +#define PSCI_VERSION_MAJOR_SHIFT 16 +#define PSCI_VERSION_MINOR_MASK \ + ((1U << PSCI_VERSION_MAJOR_SHIFT) - 1) +#define PSCI_VERSION_MAJOR_MASK ~PSCI_VERSION_MINOR_MASK +#define PSCI_VERSION_MAJOR(ver) \ + (((ver) & PSCI_VERSION_MAJOR_MASK) >> PSCI_VERSION_MAJOR_SHIFT) +#define PSCI_VERSION_MINOR(ver) \ + ((ver) & PSCI_VERSION_MINOR_MASK) + +/* PSCI return values (inclusive of all PSCI versions) */ +#define PSCI_RET_SUCCESS 0 +#define PSCI_RET_NOT_SUPPORTED -1 +#define PSCI_RET_INVALID_PARAMS -2 +#define PSCI_RET_DENIED -3 +#define PSCI_RET_ALREADY_ON -4 +#define PSCI_RET_ON_PENDING -5 +#define PSCI_RET_INTERNAL_FAILURE -6 +#define PSCI_RET_NOT_PRESENT -7 +#define PSCI_RET_DISABLED -8 + +#endif /* _UAPI_LINUX_PSCI_H */ diff --git a/include/uapi/linux/ptp_clock.h b/include/uapi/linux/ptp_clock.h index b65c834f83e..f0b7bfe5da9 100644 --- a/include/uapi/linux/ptp_clock.h +++ b/include/uapi/linux/ptp_clock.h @@ -50,7 +50,8 @@ struct ptp_clock_caps { int n_ext_ts; /* Number of external time stamp channels. */ int n_per_out; /* Number of programmable periodic signals. */ int pps; /* Whether the clock supports a PPS callback. */ - int rsv[15]; /* Reserved for future use. */ + int n_pins; /* Number of input/output pins. */ + int rsv[14]; /* Reserved for future use. */ }; struct ptp_extts_request { @@ -80,6 +81,40 @@ struct ptp_sys_offset { struct ptp_clock_time ts[2 * PTP_MAX_SAMPLES + 1]; }; +enum ptp_pin_function { + PTP_PF_NONE, + PTP_PF_EXTTS, + PTP_PF_PEROUT, + PTP_PF_PHYSYNC, +}; + +struct ptp_pin_desc { + /* + * Hardware specific human readable pin name. This field is + * set by the kernel during the PTP_PIN_GETFUNC ioctl and is + * ignored for the PTP_PIN_SETFUNC ioctl. + */ + char name[64]; + /* + * Pin index in the range of zero to ptp_clock_caps.n_pins - 1. + */ + unsigned int index; + /* + * Which of the PTP_PF_xxx functions to use on this pin. + */ + unsigned int func; + /* + * The specific channel to use for this function. + * This corresponds to the 'index' field of the + * PTP_EXTTS_REQUEST and PTP_PEROUT_REQUEST ioctls. + */ + unsigned int chan; + /* + * Reserved for future use. + */ + unsigned int rsv[5]; +}; + #define PTP_CLK_MAGIC '=' #define PTP_CLOCK_GETCAPS _IOR(PTP_CLK_MAGIC, 1, struct ptp_clock_caps) @@ -87,6 +122,8 @@ struct ptp_sys_offset { #define PTP_PEROUT_REQUEST _IOW(PTP_CLK_MAGIC, 3, struct ptp_perout_request) #define PTP_ENABLE_PPS _IOW(PTP_CLK_MAGIC, 4, int) #define PTP_SYS_OFFSET _IOW(PTP_CLK_MAGIC, 5, struct ptp_sys_offset) +#define PTP_PIN_GETFUNC _IOWR(PTP_CLK_MAGIC, 6, struct ptp_pin_desc) +#define PTP_PIN_SETFUNC _IOW(PTP_CLK_MAGIC, 7, struct ptp_pin_desc) struct ptp_extts_event { struct ptp_clock_time t; /* Time event occured. */ diff --git a/include/uapi/linux/ptrace.h b/include/uapi/linux/ptrace.h index 022ab186a81..cf1019e15f5 100644 --- a/include/uapi/linux/ptrace.h +++ b/include/uapi/linux/ptrace.h @@ -5,6 +5,7 @@ /* has the defines to get at the registers. */ +#include <linux/types.h> #define PTRACE_TRACEME 0 #define PTRACE_PEEKTEXT 1 @@ -52,6 +53,20 @@ #define PTRACE_INTERRUPT 0x4207 #define PTRACE_LISTEN 0x4208 +#define PTRACE_PEEKSIGINFO 0x4209 + +struct ptrace_peeksiginfo_args { + __u64 off; /* from which siginfo to start */ + __u32 flags; + __s32 nr; /* how may siginfos to take */ +}; + +#define PTRACE_GETSIGMASK 0x420a +#define PTRACE_SETSIGMASK 0x420b + +/* Read signals from a shared (process wide) queue */ +#define PTRACE_PEEKSIGINFO_SHARED (1 << 0) + /* Wait extended result codes for the above trace options. */ #define PTRACE_EVENT_FORK 1 #define PTRACE_EVENT_VFORK 2 diff --git a/include/uapi/linux/raid/md_p.h b/include/uapi/linux/raid/md_p.h index ee753536ab7..49f4210d439 100644 --- a/include/uapi/linux/raid/md_p.h +++ b/include/uapi/linux/raid/md_p.h @@ -16,6 +16,7 @@ #define _MD_P_H #include <linux/types.h> +#include <asm/byteorder.h> /* * RAID superblock. @@ -145,16 +146,18 @@ typedef struct mdp_superblock_s { __u32 failed_disks; /* 4 Number of failed disks */ __u32 spare_disks; /* 5 Number of spare disks */ __u32 sb_csum; /* 6 checksum of the whole superblock */ -#ifdef __BIG_ENDIAN +#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN) __u32 events_hi; /* 7 high-order of superblock update count */ __u32 events_lo; /* 8 low-order of superblock update count */ __u32 cp_events_hi; /* 9 high-order of checkpoint update count */ __u32 cp_events_lo; /* 10 low-order of checkpoint update count */ -#else +#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN) __u32 events_lo; /* 7 low-order of superblock update count */ __u32 events_hi; /* 8 high-order of superblock update count */ __u32 cp_events_lo; /* 9 low-order of checkpoint update count */ __u32 cp_events_hi; /* 10 high-order of checkpoint update count */ +#else +#error unspecified endianness #endif __u32 recovery_cp; /* 11 recovery checkpoint sector count */ /* There are only valid for minor_version > 90 */ @@ -289,6 +292,9 @@ struct mdp_superblock_1 { * backwards anyway. */ #define MD_FEATURE_NEW_OFFSET 64 /* new_offset must be honoured */ +#define MD_FEATURE_RECOVERY_BITMAP 128 /* recovery that is happening + * is guided by bitmap. + */ #define MD_FEATURE_ALL (MD_FEATURE_BITMAP_OFFSET \ |MD_FEATURE_RECOVERY_OFFSET \ |MD_FEATURE_RESHAPE_ACTIVE \ @@ -296,6 +302,7 @@ struct mdp_superblock_1 { |MD_FEATURE_REPLACEMENT \ |MD_FEATURE_RESHAPE_BACKWARDS \ |MD_FEATURE_NEW_OFFSET \ + |MD_FEATURE_RECOVERY_BITMAP \ ) -#endif +#endif diff --git a/include/uapi/linux/random.h b/include/uapi/linux/random.h index 7471b5b3b8b..fff3528a078 100644 --- a/include/uapi/linux/random.h +++ b/include/uapi/linux/random.h @@ -40,11 +40,4 @@ struct rand_pool_info { __u32 buf[0]; }; -struct rnd_state { - __u32 s1, s2, s3; -}; - -/* Exported functions */ - - #endif /* _UAPI_LINUX_RANDOM_H */ diff --git a/include/uapi/linux/reiserfs_xattr.h b/include/uapi/linux/reiserfs_xattr.h index d8ce17c2459..38fdd648be2 100644 --- a/include/uapi/linux/reiserfs_xattr.h +++ b/include/uapi/linux/reiserfs_xattr.h @@ -16,7 +16,7 @@ struct reiserfs_xattr_header { }; struct reiserfs_security_handle { - char *name; + const char *name; void *value; size_t length; }; diff --git a/include/uapi/linux/resource.h b/include/uapi/linux/resource.h index e0ed28477f4..36fb3b5fb18 100644 --- a/include/uapi/linux/resource.h +++ b/include/uapi/linux/resource.h @@ -23,25 +23,25 @@ struct rusage { struct timeval ru_utime; /* user time used */ struct timeval ru_stime; /* system time used */ - long ru_maxrss; /* maximum resident set size */ - long ru_ixrss; /* integral shared memory size */ - long ru_idrss; /* integral unshared data size */ - long ru_isrss; /* integral unshared stack size */ - long ru_minflt; /* page reclaims */ - long ru_majflt; /* page faults */ - long ru_nswap; /* swaps */ - long ru_inblock; /* block input operations */ - long ru_oublock; /* block output operations */ - long ru_msgsnd; /* messages sent */ - long ru_msgrcv; /* messages received */ - long ru_nsignals; /* signals received */ - long ru_nvcsw; /* voluntary context switches */ - long ru_nivcsw; /* involuntary " */ + __kernel_long_t ru_maxrss; /* maximum resident set size */ + __kernel_long_t ru_ixrss; /* integral shared memory size */ + __kernel_long_t ru_idrss; /* integral unshared data size */ + __kernel_long_t ru_isrss; /* integral unshared stack size */ + __kernel_long_t ru_minflt; /* page reclaims */ + __kernel_long_t ru_majflt; /* page faults */ + __kernel_long_t ru_nswap; /* swaps */ + __kernel_long_t ru_inblock; /* block input operations */ + __kernel_long_t ru_oublock; /* block output operations */ + __kernel_long_t ru_msgsnd; /* messages sent */ + __kernel_long_t ru_msgrcv; /* messages received */ + __kernel_long_t ru_nsignals; /* signals received */ + __kernel_long_t ru_nvcsw; /* voluntary context switches */ + __kernel_long_t ru_nivcsw; /* involuntary " */ }; struct rlimit { - unsigned long rlim_cur; - unsigned long rlim_max; + __kernel_ulong_t rlim_cur; + __kernel_ulong_t rlim_max; }; #define RLIM64_INFINITY (~0ULL) diff --git a/include/uapi/linux/rfkill.h b/include/uapi/linux/rfkill.h index 2753c6cc974..058757f7a73 100644 --- a/include/uapi/linux/rfkill.h +++ b/include/uapi/linux/rfkill.h @@ -37,6 +37,7 @@ * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device. * @RFKILL_TYPE_GPS: switch is on a GPS device. * @RFKILL_TYPE_FM: switch is on a FM radio device. + * @RFKILL_TYPE_NFC: switch is on an NFC device. * @NUM_RFKILL_TYPES: number of defined rfkill types */ enum rfkill_type { @@ -48,6 +49,7 @@ enum rfkill_type { RFKILL_TYPE_WWAN, RFKILL_TYPE_GPS, RFKILL_TYPE_FM, + RFKILL_TYPE_NFC, NUM_RFKILL_TYPES, }; diff --git a/include/uapi/linux/rtnetlink.h b/include/uapi/linux/rtnetlink.h index 7a5eb196ade..eb0f1a554d7 100644 --- a/include/uapi/linux/rtnetlink.h +++ b/include/uapi/linux/rtnetlink.h @@ -386,6 +386,8 @@ enum { #define RTAX_RTO_MIN RTAX_RTO_MIN RTAX_INITRWND, #define RTAX_INITRWND RTAX_INITRWND + RTAX_QUICKACK, +#define RTAX_QUICKACK RTAX_QUICKACK __RTAX_MAX }; @@ -630,6 +632,7 @@ struct tcamsg { /* New extended info filters for IFLA_EXT_MASK */ #define RTEXT_FILTER_VF (1 << 0) +#define RTEXT_FILTER_BRVLAN (1 << 1) /* End of information exported to user level */ diff --git a/include/uapi/linux/sched.h b/include/uapi/linux/sched.h index 5a0f945927a..34f9d7387d1 100644 --- a/include/uapi/linux/sched.h +++ b/include/uapi/linux/sched.h @@ -39,8 +39,14 @@ #define SCHED_BATCH 3 /* SCHED_ISO: reserved but not implemented yet */ #define SCHED_IDLE 5 +#define SCHED_DEADLINE 6 + /* Can be ORed in to make sure the process is reverted back to SCHED_NORMAL on fork */ #define SCHED_RESET_ON_FORK 0x40000000 +/* + * For the sched_{set,get}attr() calls + */ +#define SCHED_FLAG_RESET_ON_FORK 0x01 #endif /* _UAPI_LINUX_SCHED_H */ diff --git a/include/uapi/linux/sctp.h b/include/uapi/linux/sctp.h new file mode 100644 index 00000000000..266022a2be4 --- /dev/null +++ b/include/uapi/linux/sctp.h @@ -0,0 +1,845 @@ +/* SCTP kernel implementation + * (C) Copyright IBM Corp. 2001, 2004 + * Copyright (c) 1999-2000 Cisco, Inc. + * Copyright (c) 1999-2001 Motorola, Inc. + * Copyright (c) 2002 Intel Corp. + * + * This file is part of the SCTP kernel implementation + * + * This header represents the structures and constants needed to support + * the SCTP Extension to the Sockets API. + * + * This SCTP implementation is free software; + * you can redistribute it and/or modify it under the terms of + * the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This SCTP implementation is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * ************************ + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU CC; see the file COPYING. If not, see + * <http://www.gnu.org/licenses/>. + * + * Please send any bug reports or fixes you make to the + * email address(es): + * lksctp developers <linux-sctp@vger.kernel.org> + * + * Or submit a bug report through the following website: + * http://www.sf.net/projects/lksctp + * + * Written or modified by: + * La Monte H.P. Yarroll <piggy@acm.org> + * R. Stewart <randall@sctp.chicago.il.us> + * K. Morneau <kmorneau@cisco.com> + * Q. Xie <qxie1@email.mot.com> + * Karl Knutson <karl@athena.chicago.il.us> + * Jon Grimm <jgrimm@us.ibm.com> + * Daisy Chang <daisyc@us.ibm.com> + * Ryan Layer <rmlayer@us.ibm.com> + * Ardelle Fan <ardelle.fan@intel.com> + * Sridhar Samudrala <sri@us.ibm.com> + * Inaky Perez-Gonzalez <inaky.gonzalez@intel.com> + * Vlad Yasevich <vladislav.yasevich@hp.com> + * + * Any bugs reported given to us we will try to fix... any fixes shared will + * be incorporated into the next SCTP release. + */ + +#ifndef _UAPI_SCTP_H +#define _UAPI_SCTP_H + +#include <linux/types.h> +#include <linux/socket.h> + +typedef __s32 sctp_assoc_t; + +/* The following symbols come from the Sockets API Extensions for + * SCTP <draft-ietf-tsvwg-sctpsocket-07.txt>. + */ +#define SCTP_RTOINFO 0 +#define SCTP_ASSOCINFO 1 +#define SCTP_INITMSG 2 +#define SCTP_NODELAY 3 /* Get/set nodelay option. */ +#define SCTP_AUTOCLOSE 4 +#define SCTP_SET_PEER_PRIMARY_ADDR 5 +#define SCTP_PRIMARY_ADDR 6 +#define SCTP_ADAPTATION_LAYER 7 +#define SCTP_DISABLE_FRAGMENTS 8 +#define SCTP_PEER_ADDR_PARAMS 9 +#define SCTP_DEFAULT_SEND_PARAM 10 +#define SCTP_EVENTS 11 +#define SCTP_I_WANT_MAPPED_V4_ADDR 12 /* Turn on/off mapped v4 addresses */ +#define SCTP_MAXSEG 13 /* Get/set maximum fragment. */ +#define SCTP_STATUS 14 +#define SCTP_GET_PEER_ADDR_INFO 15 +#define SCTP_DELAYED_ACK_TIME 16 +#define SCTP_DELAYED_ACK SCTP_DELAYED_ACK_TIME +#define SCTP_DELAYED_SACK SCTP_DELAYED_ACK_TIME +#define SCTP_CONTEXT 17 +#define SCTP_FRAGMENT_INTERLEAVE 18 +#define SCTP_PARTIAL_DELIVERY_POINT 19 /* Set/Get partial delivery point */ +#define SCTP_MAX_BURST 20 /* Set/Get max burst */ +#define SCTP_AUTH_CHUNK 21 /* Set only: add a chunk type to authenticate */ +#define SCTP_HMAC_IDENT 22 +#define SCTP_AUTH_KEY 23 +#define SCTP_AUTH_ACTIVE_KEY 24 +#define SCTP_AUTH_DELETE_KEY 25 +#define SCTP_PEER_AUTH_CHUNKS 26 /* Read only */ +#define SCTP_LOCAL_AUTH_CHUNKS 27 /* Read only */ +#define SCTP_GET_ASSOC_NUMBER 28 /* Read only */ +#define SCTP_GET_ASSOC_ID_LIST 29 /* Read only */ +#define SCTP_AUTO_ASCONF 30 +#define SCTP_PEER_ADDR_THLDS 31 + +/* Internal Socket Options. Some of the sctp library functions are + * implemented using these socket options. + */ +#define SCTP_SOCKOPT_BINDX_ADD 100 /* BINDX requests for adding addrs */ +#define SCTP_SOCKOPT_BINDX_REM 101 /* BINDX requests for removing addrs. */ +#define SCTP_SOCKOPT_PEELOFF 102 /* peel off association. */ +/* Options 104-106 are deprecated and removed. Do not use this space */ +#define SCTP_SOCKOPT_CONNECTX_OLD 107 /* CONNECTX old requests. */ +#define SCTP_GET_PEER_ADDRS 108 /* Get all peer address. */ +#define SCTP_GET_LOCAL_ADDRS 109 /* Get all local address. */ +#define SCTP_SOCKOPT_CONNECTX 110 /* CONNECTX requests. */ +#define SCTP_SOCKOPT_CONNECTX3 111 /* CONNECTX requests (updated) */ +#define SCTP_GET_ASSOC_STATS 112 /* Read only */ + +/* + * 5.2.1 SCTP Initiation Structure (SCTP_INIT) + * + * This cmsghdr structure provides information for initializing new + * SCTP associations with sendmsg(). The SCTP_INITMSG socket option + * uses this same data structure. This structure is not used for + * recvmsg(). + * + * cmsg_level cmsg_type cmsg_data[] + * ------------ ------------ ---------------------- + * IPPROTO_SCTP SCTP_INIT struct sctp_initmsg + * + */ +struct sctp_initmsg { + __u16 sinit_num_ostreams; + __u16 sinit_max_instreams; + __u16 sinit_max_attempts; + __u16 sinit_max_init_timeo; +}; + +/* + * 5.2.2 SCTP Header Information Structure (SCTP_SNDRCV) + * + * This cmsghdr structure specifies SCTP options for sendmsg() and + * describes SCTP header information about a received message through + * recvmsg(). + * + * cmsg_level cmsg_type cmsg_data[] + * ------------ ------------ ---------------------- + * IPPROTO_SCTP SCTP_SNDRCV struct sctp_sndrcvinfo + * + */ +struct sctp_sndrcvinfo { + __u16 sinfo_stream; + __u16 sinfo_ssn; + __u16 sinfo_flags; + __u32 sinfo_ppid; + __u32 sinfo_context; + __u32 sinfo_timetolive; + __u32 sinfo_tsn; + __u32 sinfo_cumtsn; + sctp_assoc_t sinfo_assoc_id; +}; + +/* + * sinfo_flags: 16 bits (unsigned integer) + * + * This field may contain any of the following flags and is composed of + * a bitwise OR of these values. + */ + +enum sctp_sinfo_flags { + SCTP_UNORDERED = 1, /* Send/receive message unordered. */ + SCTP_ADDR_OVER = 2, /* Override the primary destination. */ + SCTP_ABORT=4, /* Send an ABORT message to the peer. */ + SCTP_SACK_IMMEDIATELY = 8, /* SACK should be sent without delay */ + SCTP_EOF=MSG_FIN, /* Initiate graceful shutdown process. */ +}; + +typedef union { + __u8 raw; + struct sctp_initmsg init; + struct sctp_sndrcvinfo sndrcv; +} sctp_cmsg_data_t; + +/* These are cmsg_types. */ +typedef enum sctp_cmsg_type { + SCTP_INIT, /* 5.2.1 SCTP Initiation Structure */ +#define SCTP_INIT SCTP_INIT + SCTP_SNDRCV, /* 5.2.2 SCTP Header Information Structure */ +#define SCTP_SNDRCV SCTP_SNDRCV +} sctp_cmsg_t; + +/* + * 5.3.1.1 SCTP_ASSOC_CHANGE + * + * Communication notifications inform the ULP that an SCTP association + * has either begun or ended. The identifier for a new association is + * provided by this notificaion. The notification information has the + * following format: + * + */ +struct sctp_assoc_change { + __u16 sac_type; + __u16 sac_flags; + __u32 sac_length; + __u16 sac_state; + __u16 sac_error; + __u16 sac_outbound_streams; + __u16 sac_inbound_streams; + sctp_assoc_t sac_assoc_id; + __u8 sac_info[0]; +}; + +/* + * sac_state: 32 bits (signed integer) + * + * This field holds one of a number of values that communicate the + * event that happened to the association. They include: + * + * Note: The following state names deviate from the API draft as + * the names clash too easily with other kernel symbols. + */ +enum sctp_sac_state { + SCTP_COMM_UP, + SCTP_COMM_LOST, + SCTP_RESTART, + SCTP_SHUTDOWN_COMP, + SCTP_CANT_STR_ASSOC, +}; + +/* + * 5.3.1.2 SCTP_PEER_ADDR_CHANGE + * + * When a destination address on a multi-homed peer encounters a change + * an interface details event is sent. The information has the + * following structure: + */ +struct sctp_paddr_change { + __u16 spc_type; + __u16 spc_flags; + __u32 spc_length; + struct sockaddr_storage spc_aaddr; + int spc_state; + int spc_error; + sctp_assoc_t spc_assoc_id; +} __attribute__((packed, aligned(4))); + +/* + * spc_state: 32 bits (signed integer) + * + * This field holds one of a number of values that communicate the + * event that happened to the address. They include: + */ +enum sctp_spc_state { + SCTP_ADDR_AVAILABLE, + SCTP_ADDR_UNREACHABLE, + SCTP_ADDR_REMOVED, + SCTP_ADDR_ADDED, + SCTP_ADDR_MADE_PRIM, + SCTP_ADDR_CONFIRMED, +}; + + +/* + * 5.3.1.3 SCTP_REMOTE_ERROR + * + * A remote peer may send an Operational Error message to its peer. + * This message indicates a variety of error conditions on an + * association. The entire error TLV as it appears on the wire is + * included in a SCTP_REMOTE_ERROR event. Please refer to the SCTP + * specification [SCTP] and any extensions for a list of possible + * error formats. SCTP error TLVs have the format: + */ +struct sctp_remote_error { + __u16 sre_type; + __u16 sre_flags; + __u32 sre_length; + __u16 sre_error; + sctp_assoc_t sre_assoc_id; + __u8 sre_data[0]; +}; + + +/* + * 5.3.1.4 SCTP_SEND_FAILED + * + * If SCTP cannot deliver a message it may return the message as a + * notification. + */ +struct sctp_send_failed { + __u16 ssf_type; + __u16 ssf_flags; + __u32 ssf_length; + __u32 ssf_error; + struct sctp_sndrcvinfo ssf_info; + sctp_assoc_t ssf_assoc_id; + __u8 ssf_data[0]; +}; + +/* + * ssf_flags: 16 bits (unsigned integer) + * + * The flag value will take one of the following values + * + * SCTP_DATA_UNSENT - Indicates that the data was never put on + * the wire. + * + * SCTP_DATA_SENT - Indicates that the data was put on the wire. + * Note that this does not necessarily mean that the + * data was (or was not) successfully delivered. + */ +enum sctp_ssf_flags { + SCTP_DATA_UNSENT, + SCTP_DATA_SENT, +}; + +/* + * 5.3.1.5 SCTP_SHUTDOWN_EVENT + * + * When a peer sends a SHUTDOWN, SCTP delivers this notification to + * inform the application that it should cease sending data. + */ +struct sctp_shutdown_event { + __u16 sse_type; + __u16 sse_flags; + __u32 sse_length; + sctp_assoc_t sse_assoc_id; +}; + +/* + * 5.3.1.6 SCTP_ADAPTATION_INDICATION + * + * When a peer sends a Adaptation Layer Indication parameter , SCTP + * delivers this notification to inform the application + * that of the peers requested adaptation layer. + */ +struct sctp_adaptation_event { + __u16 sai_type; + __u16 sai_flags; + __u32 sai_length; + __u32 sai_adaptation_ind; + sctp_assoc_t sai_assoc_id; +}; + +/* + * 5.3.1.7 SCTP_PARTIAL_DELIVERY_EVENT + * + * When a receiver is engaged in a partial delivery of a + * message this notification will be used to indicate + * various events. + */ +struct sctp_pdapi_event { + __u16 pdapi_type; + __u16 pdapi_flags; + __u32 pdapi_length; + __u32 pdapi_indication; + sctp_assoc_t pdapi_assoc_id; +}; + +enum { SCTP_PARTIAL_DELIVERY_ABORTED=0, }; + +/* + * 5.3.1.8. SCTP_AUTHENTICATION_EVENT + * + * When a receiver is using authentication this message will provide + * notifications regarding new keys being made active as well as errors. + */ +struct sctp_authkey_event { + __u16 auth_type; + __u16 auth_flags; + __u32 auth_length; + __u16 auth_keynumber; + __u16 auth_altkeynumber; + __u32 auth_indication; + sctp_assoc_t auth_assoc_id; +}; + +enum { SCTP_AUTH_NEWKEY = 0, }; + +/* + * 6.1.9. SCTP_SENDER_DRY_EVENT + * + * When the SCTP stack has no more user data to send or retransmit, this + * notification is given to the user. Also, at the time when a user app + * subscribes to this event, if there is no data to be sent or + * retransmit, the stack will immediately send up this notification. + */ +struct sctp_sender_dry_event { + __u16 sender_dry_type; + __u16 sender_dry_flags; + __u32 sender_dry_length; + sctp_assoc_t sender_dry_assoc_id; +}; + +/* + * Described in Section 7.3 + * Ancillary Data and Notification Interest Options + */ +struct sctp_event_subscribe { + __u8 sctp_data_io_event; + __u8 sctp_association_event; + __u8 sctp_address_event; + __u8 sctp_send_failure_event; + __u8 sctp_peer_error_event; + __u8 sctp_shutdown_event; + __u8 sctp_partial_delivery_event; + __u8 sctp_adaptation_layer_event; + __u8 sctp_authentication_event; + __u8 sctp_sender_dry_event; +}; + +/* + * 5.3.1 SCTP Notification Structure + * + * The notification structure is defined as the union of all + * notification types. + * + */ +union sctp_notification { + struct { + __u16 sn_type; /* Notification type. */ + __u16 sn_flags; + __u32 sn_length; + } sn_header; + struct sctp_assoc_change sn_assoc_change; + struct sctp_paddr_change sn_paddr_change; + struct sctp_remote_error sn_remote_error; + struct sctp_send_failed sn_send_failed; + struct sctp_shutdown_event sn_shutdown_event; + struct sctp_adaptation_event sn_adaptation_event; + struct sctp_pdapi_event sn_pdapi_event; + struct sctp_authkey_event sn_authkey_event; + struct sctp_sender_dry_event sn_sender_dry_event; +}; + +/* Section 5.3.1 + * All standard values for sn_type flags are greater than 2^15. + * Values from 2^15 and down are reserved. + */ + +enum sctp_sn_type { + SCTP_SN_TYPE_BASE = (1<<15), + SCTP_ASSOC_CHANGE, +#define SCTP_ASSOC_CHANGE SCTP_ASSOC_CHANGE + SCTP_PEER_ADDR_CHANGE, +#define SCTP_PEER_ADDR_CHANGE SCTP_PEER_ADDR_CHANGE + SCTP_SEND_FAILED, +#define SCTP_SEND_FAILED SCTP_SEND_FAILED + SCTP_REMOTE_ERROR, +#define SCTP_REMOTE_ERROR SCTP_REMOTE_ERROR + SCTP_SHUTDOWN_EVENT, +#define SCTP_SHUTDOWN_EVENT SCTP_SHUTDOWN_EVENT + SCTP_PARTIAL_DELIVERY_EVENT, +#define SCTP_PARTIAL_DELIVERY_EVENT SCTP_PARTIAL_DELIVERY_EVENT + SCTP_ADAPTATION_INDICATION, +#define SCTP_ADAPTATION_INDICATION SCTP_ADAPTATION_INDICATION + SCTP_AUTHENTICATION_EVENT, +#define SCTP_AUTHENTICATION_INDICATION SCTP_AUTHENTICATION_EVENT + SCTP_SENDER_DRY_EVENT, +#define SCTP_SENDER_DRY_EVENT SCTP_SENDER_DRY_EVENT +}; + +/* Notification error codes used to fill up the error fields in some + * notifications. + * SCTP_PEER_ADDRESS_CHAGE : spc_error + * SCTP_ASSOC_CHANGE : sac_error + * These names should be potentially included in the draft 04 of the SCTP + * sockets API specification. + */ +typedef enum sctp_sn_error { + SCTP_FAILED_THRESHOLD, + SCTP_RECEIVED_SACK, + SCTP_HEARTBEAT_SUCCESS, + SCTP_RESPONSE_TO_USER_REQ, + SCTP_INTERNAL_ERROR, + SCTP_SHUTDOWN_GUARD_EXPIRES, + SCTP_PEER_FAULTY, +} sctp_sn_error_t; + +/* + * 7.1.1 Retransmission Timeout Parameters (SCTP_RTOINFO) + * + * The protocol parameters used to initialize and bound retransmission + * timeout (RTO) are tunable. See [SCTP] for more information on how + * these parameters are used in RTO calculation. + */ +struct sctp_rtoinfo { + sctp_assoc_t srto_assoc_id; + __u32 srto_initial; + __u32 srto_max; + __u32 srto_min; +}; + +/* + * 7.1.2 Association Parameters (SCTP_ASSOCINFO) + * + * This option is used to both examine and set various association and + * endpoint parameters. + */ +struct sctp_assocparams { + sctp_assoc_t sasoc_assoc_id; + __u16 sasoc_asocmaxrxt; + __u16 sasoc_number_peer_destinations; + __u32 sasoc_peer_rwnd; + __u32 sasoc_local_rwnd; + __u32 sasoc_cookie_life; +}; + +/* + * 7.1.9 Set Peer Primary Address (SCTP_SET_PEER_PRIMARY_ADDR) + * + * Requests that the peer mark the enclosed address as the association + * primary. The enclosed address must be one of the association's + * locally bound addresses. The following structure is used to make a + * set primary request: + */ +struct sctp_setpeerprim { + sctp_assoc_t sspp_assoc_id; + struct sockaddr_storage sspp_addr; +} __attribute__((packed, aligned(4))); + +/* + * 7.1.10 Set Primary Address (SCTP_PRIMARY_ADDR) + * + * Requests that the local SCTP stack use the enclosed peer address as + * the association primary. The enclosed address must be one of the + * association peer's addresses. The following structure is used to + * make a set peer primary request: + */ +struct sctp_prim { + sctp_assoc_t ssp_assoc_id; + struct sockaddr_storage ssp_addr; +} __attribute__((packed, aligned(4))); + +/* For backward compatibility use, define the old name too */ +#define sctp_setprim sctp_prim + +/* + * 7.1.11 Set Adaptation Layer Indicator (SCTP_ADAPTATION_LAYER) + * + * Requests that the local endpoint set the specified Adaptation Layer + * Indication parameter for all future INIT and INIT-ACK exchanges. + */ +struct sctp_setadaptation { + __u32 ssb_adaptation_ind; +}; + +/* + * 7.1.13 Peer Address Parameters (SCTP_PEER_ADDR_PARAMS) + * + * Applications can enable or disable heartbeats for any peer address + * of an association, modify an address's heartbeat interval, force a + * heartbeat to be sent immediately, and adjust the address's maximum + * number of retransmissions sent before an address is considered + * unreachable. The following structure is used to access and modify an + * address's parameters: + */ +enum sctp_spp_flags { + SPP_HB_ENABLE = 1<<0, /*Enable heartbeats*/ + SPP_HB_DISABLE = 1<<1, /*Disable heartbeats*/ + SPP_HB = SPP_HB_ENABLE | SPP_HB_DISABLE, + SPP_HB_DEMAND = 1<<2, /*Send heartbeat immediately*/ + SPP_PMTUD_ENABLE = 1<<3, /*Enable PMTU discovery*/ + SPP_PMTUD_DISABLE = 1<<4, /*Disable PMTU discovery*/ + SPP_PMTUD = SPP_PMTUD_ENABLE | SPP_PMTUD_DISABLE, + SPP_SACKDELAY_ENABLE = 1<<5, /*Enable SACK*/ + SPP_SACKDELAY_DISABLE = 1<<6, /*Disable SACK*/ + SPP_SACKDELAY = SPP_SACKDELAY_ENABLE | SPP_SACKDELAY_DISABLE, + SPP_HB_TIME_IS_ZERO = 1<<7, /* Set HB delay to 0 */ +}; + +struct sctp_paddrparams { + sctp_assoc_t spp_assoc_id; + struct sockaddr_storage spp_address; + __u32 spp_hbinterval; + __u16 spp_pathmaxrxt; + __u32 spp_pathmtu; + __u32 spp_sackdelay; + __u32 spp_flags; +} __attribute__((packed, aligned(4))); + +/* + * 7.1.18. Add a chunk that must be authenticated (SCTP_AUTH_CHUNK) + * + * This set option adds a chunk type that the user is requesting to be + * received only in an authenticated way. Changes to the list of chunks + * will only effect future associations on the socket. + */ +struct sctp_authchunk { + __u8 sauth_chunk; +}; + +/* + * 7.1.19. Get or set the list of supported HMAC Identifiers (SCTP_HMAC_IDENT) + * + * This option gets or sets the list of HMAC algorithms that the local + * endpoint requires the peer to use. + */ +#ifndef __KERNEL__ +/* This here is only used by user space as is. It might not be a good idea + * to export/reveal the whole structure with reserved fields etc. + */ +enum { + SCTP_AUTH_HMAC_ID_SHA1 = 1, + SCTP_AUTH_HMAC_ID_SHA256 = 3, +}; +#endif + +struct sctp_hmacalgo { + __u32 shmac_num_idents; + __u16 shmac_idents[]; +}; + +/* Sadly, user and kernel space have different names for + * this structure member, so this is to not break anything. + */ +#define shmac_number_of_idents shmac_num_idents + +/* + * 7.1.20. Set a shared key (SCTP_AUTH_KEY) + * + * This option will set a shared secret key which is used to build an + * association shared key. + */ +struct sctp_authkey { + sctp_assoc_t sca_assoc_id; + __u16 sca_keynumber; + __u16 sca_keylength; + __u8 sca_key[]; +}; + +/* + * 7.1.21. Get or set the active shared key (SCTP_AUTH_ACTIVE_KEY) + * + * This option will get or set the active shared key to be used to build + * the association shared key. + */ + +struct sctp_authkeyid { + sctp_assoc_t scact_assoc_id; + __u16 scact_keynumber; +}; + + +/* + * 7.1.23. Get or set delayed ack timer (SCTP_DELAYED_SACK) + * + * This option will effect the way delayed acks are performed. This + * option allows you to get or set the delayed ack time, in + * milliseconds. It also allows changing the delayed ack frequency. + * Changing the frequency to 1 disables the delayed sack algorithm. If + * the assoc_id is 0, then this sets or gets the endpoints default + * values. If the assoc_id field is non-zero, then the set or get + * effects the specified association for the one to many model (the + * assoc_id field is ignored by the one to one model). Note that if + * sack_delay or sack_freq are 0 when setting this option, then the + * current values will remain unchanged. + */ +struct sctp_sack_info { + sctp_assoc_t sack_assoc_id; + uint32_t sack_delay; + uint32_t sack_freq; +}; + +struct sctp_assoc_value { + sctp_assoc_t assoc_id; + uint32_t assoc_value; +}; + +/* + * 7.2.2 Peer Address Information + * + * Applications can retrieve information about a specific peer address + * of an association, including its reachability state, congestion + * window, and retransmission timer values. This information is + * read-only. The following structure is used to access this + * information: + */ +struct sctp_paddrinfo { + sctp_assoc_t spinfo_assoc_id; + struct sockaddr_storage spinfo_address; + __s32 spinfo_state; + __u32 spinfo_cwnd; + __u32 spinfo_srtt; + __u32 spinfo_rto; + __u32 spinfo_mtu; +} __attribute__((packed, aligned(4))); + +/* Peer addresses's state. */ +/* UNKNOWN: Peer address passed by the upper layer in sendmsg or connect[x] + * calls. + * UNCONFIRMED: Peer address received in INIT/INIT-ACK address parameters. + * Not yet confirmed by a heartbeat and not available for data + * transfers. + * ACTIVE : Peer address confirmed, active and available for data transfers. + * INACTIVE: Peer address inactive and not available for data transfers. + */ +enum sctp_spinfo_state { + SCTP_INACTIVE, + SCTP_PF, + SCTP_ACTIVE, + SCTP_UNCONFIRMED, + SCTP_UNKNOWN = 0xffff /* Value used for transport state unknown */ +}; + +/* + * 7.2.1 Association Status (SCTP_STATUS) + * + * Applications can retrieve current status information about an + * association, including association state, peer receiver window size, + * number of unacked data chunks, and number of data chunks pending + * receipt. This information is read-only. The following structure is + * used to access this information: + */ +struct sctp_status { + sctp_assoc_t sstat_assoc_id; + __s32 sstat_state; + __u32 sstat_rwnd; + __u16 sstat_unackdata; + __u16 sstat_penddata; + __u16 sstat_instrms; + __u16 sstat_outstrms; + __u32 sstat_fragmentation_point; + struct sctp_paddrinfo sstat_primary; +}; + +/* + * 7.2.3. Get the list of chunks the peer requires to be authenticated + * (SCTP_PEER_AUTH_CHUNKS) + * + * This option gets a list of chunks for a specified association that + * the peer requires to be received authenticated only. + */ +struct sctp_authchunks { + sctp_assoc_t gauth_assoc_id; + __u32 gauth_number_of_chunks; + uint8_t gauth_chunks[]; +}; + +/* The broken spelling has been released already in lksctp-tools header, + * so don't break anyone, now that it's fixed. + */ +#define guth_number_of_chunks gauth_number_of_chunks + +/* Association states. */ +enum sctp_sstat_state { + SCTP_EMPTY = 0, + SCTP_CLOSED = 1, + SCTP_COOKIE_WAIT = 2, + SCTP_COOKIE_ECHOED = 3, + SCTP_ESTABLISHED = 4, + SCTP_SHUTDOWN_PENDING = 5, + SCTP_SHUTDOWN_SENT = 6, + SCTP_SHUTDOWN_RECEIVED = 7, + SCTP_SHUTDOWN_ACK_SENT = 8, +}; + +/* + * 8.2.6. Get the Current Identifiers of Associations + * (SCTP_GET_ASSOC_ID_LIST) + * + * This option gets the current list of SCTP association identifiers of + * the SCTP associations handled by a one-to-many style socket. + */ +struct sctp_assoc_ids { + __u32 gaids_number_of_ids; + sctp_assoc_t gaids_assoc_id[]; +}; + +/* + * 8.3, 8.5 get all peer/local addresses in an association. + * This parameter struct is used by SCTP_GET_PEER_ADDRS and + * SCTP_GET_LOCAL_ADDRS socket options used internally to implement + * sctp_getpaddrs() and sctp_getladdrs() API. + */ +struct sctp_getaddrs_old { + sctp_assoc_t assoc_id; + int addr_num; +#ifdef __KERNEL__ + struct sockaddr __user *addrs; +#else + struct sockaddr *addrs; +#endif +}; + +struct sctp_getaddrs { + sctp_assoc_t assoc_id; /*input*/ + __u32 addr_num; /*output*/ + __u8 addrs[0]; /*output, variable size*/ +}; + +/* A socket user request obtained via SCTP_GET_ASSOC_STATS that retrieves + * association stats. All stats are counts except sas_maxrto and + * sas_obs_rto_ipaddr. maxrto is the max observed rto + transport since + * the last call. Will return 0 when RTO was not update since last call + */ +struct sctp_assoc_stats { + sctp_assoc_t sas_assoc_id; /* Input */ + /* Transport of observed max RTO */ + struct sockaddr_storage sas_obs_rto_ipaddr; + __u64 sas_maxrto; /* Maximum Observed RTO for period */ + __u64 sas_isacks; /* SACKs received */ + __u64 sas_osacks; /* SACKs sent */ + __u64 sas_opackets; /* Packets sent */ + __u64 sas_ipackets; /* Packets received */ + __u64 sas_rtxchunks; /* Retransmitted Chunks */ + __u64 sas_outofseqtsns;/* TSN received > next expected */ + __u64 sas_idupchunks; /* Dups received (ordered+unordered) */ + __u64 sas_gapcnt; /* Gap Acknowledgements Received */ + __u64 sas_ouodchunks; /* Unordered data chunks sent */ + __u64 sas_iuodchunks; /* Unordered data chunks received */ + __u64 sas_oodchunks; /* Ordered data chunks sent */ + __u64 sas_iodchunks; /* Ordered data chunks received */ + __u64 sas_octrlchunks; /* Control chunks sent */ + __u64 sas_ictrlchunks; /* Control chunks received */ +}; + +/* These are bit fields for msghdr->msg_flags. See section 5.1. */ +/* On user space Linux, these live in <bits/socket.h> as an enum. */ +enum sctp_msg_flags { + MSG_NOTIFICATION = 0x8000, +#define MSG_NOTIFICATION MSG_NOTIFICATION +}; + +/* + * 8.1 sctp_bindx() + * + * The flags parameter is formed from the bitwise OR of zero or more of the + * following currently defined flags: + */ +#define SCTP_BINDX_ADD_ADDR 0x01 +#define SCTP_BINDX_REM_ADDR 0x02 + +/* This is the structure that is passed as an argument(optval) to + * getsockopt(SCTP_SOCKOPT_PEELOFF). + */ +typedef struct { + sctp_assoc_t associd; + int sd; +} sctp_peeloff_arg_t; + +/* + * Peer Address Thresholds socket option + */ +struct sctp_paddrthlds { + sctp_assoc_t spt_assoc_id; + struct sockaddr_storage spt_address; + __u16 spt_pathmaxrxt; + __u16 spt_pathpfthld; +}; + +#endif /* _UAPI_SCTP_H */ diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 2c6c85f18ea..5820269aa13 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -50,8 +50,11 @@ #define PORT_LPC3220 22 /* NXP LPC32xx SoC "Standard" UART */ #define PORT_8250_CIR 23 /* CIR infrared port, has its own driver */ #define PORT_XR17V35X 24 /* Exar XR17V35x UARTs */ -#define PORT_BRCM_TRUMANAGE 24 -#define PORT_MAX_8250 25 /* max port ID */ +#define PORT_BRCM_TRUMANAGE 25 +#define PORT_ALTR_16550_F32 26 /* Altera 16550 UART with 32 FIFOs */ +#define PORT_ALTR_16550_F64 27 /* Altera 16550 UART with 64 FIFOs */ +#define PORT_ALTR_16550_F128 28 /* Altera 16550 UART with 128 FIFOs */ +#define PORT_MAX_8250 28 /* max port ID */ /* * ARM specific type numbers. These are not currently guaranteed @@ -208,7 +211,7 @@ /* VIA VT8500 SoC */ #define PORT_VT8500 97 -/* Xilinx PSS UART */ +/* Cadence (Xilinx Zynq) UART */ #define PORT_XUARTPS 98 /* Atheros AR933X SoC */ @@ -220,4 +223,25 @@ /* ARC (Synopsys) on-chip UART */ #define PORT_ARC 101 +/* Rocketport EXPRESS/INFINITY */ +#define PORT_RP2 102 + +/* Freescale lpuart */ +#define PORT_LPUART 103 + +/* SH-SCI */ +#define PORT_HSCIF 104 + +/* ST ASC type numbers */ +#define PORT_ASC 105 + +/* Tilera TILE-Gx UART */ +#define PORT_TILEGX 106 + +/* MEN 16z135 UART */ +#define PORT_MEN_Z135 107 + +/* SC16IS74xx */ +#define PORT_SC16IS7XX 108 + #endif /* _UAPILINUX_SERIAL_CORE_H */ diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h index e6322605b13..99b47058816 100644 --- a/include/uapi/linux/serial_reg.h +++ b/include/uapi/linux/serial_reg.h @@ -32,7 +32,7 @@ #define UART_IIR 2 /* In: Interrupt ID Register */ #define UART_IIR_NO_INT 0x01 /* No interrupts pending */ -#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ +#define UART_IIR_ID 0x0e /* Mask for the interrupt ID */ #define UART_IIR_MSI 0x00 /* Modem status interrupt */ #define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ #define UART_IIR_RDI 0x04 /* Receiver data interrupt */ diff --git a/include/uapi/linux/shm.h b/include/uapi/linux/shm.h index ec36fa1a83a..1fbf24ea37f 100644 --- a/include/uapi/linux/shm.h +++ b/include/uapi/linux/shm.h @@ -8,19 +8,20 @@ #endif /* - * SHMMAX, SHMMNI and SHMALL are upper limits are defaults which can - * be increased by sysctl + * SHMMNI, SHMMAX and SHMALL are default upper limits which can be + * modified by sysctl. The SHMMAX and SHMALL values have been chosen to + * be as large possible without facilitating scenarios where userspace + * causes overflows when adjusting the limits via operations of the form + * "retrieve current limit; add X; update limit". It is therefore not + * advised to make SHMMAX and SHMALL any larger. These limits are + * suitable for both 32 and 64-bit systems. */ - -#define SHMMAX 0x2000000 /* max shared seg size (bytes) */ #define SHMMIN 1 /* min shared seg size (bytes) */ #define SHMMNI 4096 /* max num of segs system wide */ -#ifndef __KERNEL__ -#define SHMALL (SHMMAX/getpagesize()*(SHMMNI/16)) -#endif +#define SHMMAX (ULONG_MAX - (1UL << 24)) /* max shared seg size (bytes) */ +#define SHMALL (ULONG_MAX - (1UL << 24)) /* max shm system wide (pages) */ #define SHMSEG SHMMNI /* max shared segs per process */ - /* Obsolete, used only for backwards compatibility and libc5 compiles */ struct shmid_ds { struct ipc_perm shm_perm; /* operation perms */ @@ -68,11 +69,11 @@ struct shminfo { struct shm_info { int used_ids; - unsigned long shm_tot; /* total allocated shm */ - unsigned long shm_rss; /* total resident shm */ - unsigned long shm_swp; /* total swapped shm */ - unsigned long swap_attempts; - unsigned long swap_successes; + __kernel_ulong_t shm_tot; /* total allocated shm */ + __kernel_ulong_t shm_rss; /* total resident shm */ + __kernel_ulong_t shm_swp; /* total swapped shm */ + __kernel_ulong_t swap_attempts; + __kernel_ulong_t swap_successes; }; diff --git a/include/uapi/linux/snmp.h b/include/uapi/linux/snmp.h index fdfba235f9f..df40137f33d 100644 --- a/include/uapi/linux/snmp.h +++ b/include/uapi/linux/snmp.h @@ -50,6 +50,11 @@ enum IPSTATS_MIB_OUTMCASTOCTETS, /* OutMcastOctets */ IPSTATS_MIB_INBCASTOCTETS, /* InBcastOctets */ IPSTATS_MIB_OUTBCASTOCTETS, /* OutBcastOctets */ + IPSTATS_MIB_CSUMERRORS, /* InCsumErrors */ + IPSTATS_MIB_NOECTPKTS, /* InNoECTPkts */ + IPSTATS_MIB_ECT1PKTS, /* InECT1Pkts */ + IPSTATS_MIB_ECT0PKTS, /* InECT0Pkts */ + IPSTATS_MIB_CEPKTS, /* InCEPkts */ __IPSTATS_MIB_MAX }; @@ -87,6 +92,7 @@ enum ICMP_MIB_OUTTIMESTAMPREPS, /* OutTimestampReps */ ICMP_MIB_OUTADDRMASKS, /* OutAddrMasks */ ICMP_MIB_OUTADDRMASKREPS, /* OutAddrMaskReps */ + ICMP_MIB_CSUMERRORS, /* InCsumErrors */ __ICMP_MIB_MAX }; @@ -103,6 +109,7 @@ enum ICMP6_MIB_INERRORS, /* InErrors */ ICMP6_MIB_OUTMSGS, /* OutMsgs */ ICMP6_MIB_OUTERRORS, /* OutErrors */ + ICMP6_MIB_CSUMERRORS, /* InCsumErrors */ __ICMP6_MIB_MAX }; @@ -130,6 +137,7 @@ enum TCP_MIB_RETRANSSEGS, /* RetransSegs */ TCP_MIB_INERRS, /* InErrs */ TCP_MIB_OUTRSTS, /* OutRsts */ + TCP_MIB_CSUMERRORS, /* InCsumErrors */ __TCP_MIB_MAX }; @@ -147,6 +155,7 @@ enum UDP_MIB_OUTDATAGRAMS, /* OutDatagrams */ UDP_MIB_RCVBUFERRORS, /* RcvbufErrors */ UDP_MIB_SNDBUFERRORS, /* SndbufErrors */ + UDP_MIB_CSUMERRORS, /* InCsumErrors */ __UDP_MIB_MAX }; @@ -202,6 +211,8 @@ enum LINUX_MIB_TCPFORWARDRETRANS, /* TCPForwardRetrans */ LINUX_MIB_TCPSLOWSTARTRETRANS, /* TCPSlowStartRetrans */ LINUX_MIB_TCPTIMEOUTS, /* TCPTimeouts */ + LINUX_MIB_TCPLOSSPROBES, /* TCPLossProbes */ + LINUX_MIB_TCPLOSSPROBERECOVERY, /* TCPLossProbeRecovery */ LINUX_MIB_TCPRENORECOVERYFAIL, /* TCPRenoRecoveryFail */ LINUX_MIB_TCPSACKRECOVERYFAIL, /* TCPSackRecoveryFail */ LINUX_MIB_TCPSCHEDULERFAILED, /* TCPSchedulerFailed */ @@ -241,10 +252,19 @@ enum LINUX_MIB_TCPCHALLENGEACK, /* TCPChallengeACK */ LINUX_MIB_TCPSYNCHALLENGE, /* TCPSYNChallenge */ LINUX_MIB_TCPFASTOPENACTIVE, /* TCPFastOpenActive */ + LINUX_MIB_TCPFASTOPENACTIVEFAIL, /* TCPFastOpenActiveFail */ LINUX_MIB_TCPFASTOPENPASSIVE, /* TCPFastOpenPassive*/ LINUX_MIB_TCPFASTOPENPASSIVEFAIL, /* TCPFastOpenPassiveFail */ LINUX_MIB_TCPFASTOPENLISTENOVERFLOW, /* TCPFastOpenListenOverflow */ LINUX_MIB_TCPFASTOPENCOOKIEREQD, /* TCPFastOpenCookieReqd */ + LINUX_MIB_TCPSPURIOUS_RTX_HOSTQUEUES, /* TCPSpuriousRtxHostQueues */ + LINUX_MIB_BUSYPOLLRXPACKETS, /* BusyPollRxPackets */ + LINUX_MIB_TCPAUTOCORKING, /* TCPAutoCorking */ + LINUX_MIB_TCPFROMZEROWINDOWADV, /* TCPFromZeroWindowAdv */ + LINUX_MIB_TCPTOZEROWINDOWADV, /* TCPToZeroWindowAdv */ + LINUX_MIB_TCPWANTZEROWINDOWADV, /* TCPWantZeroWindowAdv */ + LINUX_MIB_TCPSYNRETRANS, /* TCPSynRetrans */ + LINUX_MIB_TCPORIGDATASENT, /* TCPOrigDataSent */ __LINUX_MIB_MAX }; @@ -278,6 +298,8 @@ enum LINUX_MIB_XFRMOUTPOLDEAD, /* XfrmOutPolDead */ LINUX_MIB_XFRMOUTPOLERROR, /* XfrmOutPolError */ LINUX_MIB_XFRMFWDHDRERROR, /* XfrmFwdHdrError*/ + LINUX_MIB_XFRMOUTSTATEINVALID, /* XfrmOutStateInvalid */ + LINUX_MIB_XFRMACQUIREERROR, /* XfrmAcquireError */ __LINUX_MIB_XFRMMAX }; diff --git a/include/uapi/linux/sockios.h b/include/uapi/linux/sockios.h index 7997a506ad4..e888b1aed69 100644 --- a/include/uapi/linux/sockios.h +++ b/include/uapi/linux/sockios.h @@ -125,7 +125,8 @@ #define SIOCBRDELIF 0x89a3 /* remove interface from bridge */ /* hardware time stamping: parameters in linux/net_tstamp.h */ -#define SIOCSHWTSTAMP 0x89b0 +#define SIOCSHWTSTAMP 0x89b0 /* set and get config */ +#define SIOCGHWTSTAMP 0x89b1 /* get config */ /* Device private ioctl calls */ diff --git a/include/uapi/linux/spi/spidev.h b/include/uapi/linux/spi/spidev.h index 52d9ed01855..dd5f21e7580 100644 --- a/include/uapi/linux/spi/spidev.h +++ b/include/uapi/linux/spi/spidev.h @@ -42,6 +42,10 @@ #define SPI_LOOP 0x20 #define SPI_NO_CS 0x40 #define SPI_READY 0x80 +#define SPI_TX_DUAL 0x100 +#define SPI_TX_QUAD 0x200 +#define SPI_RX_DUAL 0x400 +#define SPI_RX_QUAD 0x800 /*---------------------------------------------------------------------------*/ @@ -92,7 +96,9 @@ struct spi_ioc_transfer { __u16 delay_usecs; __u8 bits_per_word; __u8 cs_change; - __u32 pad; + __u8 tx_nbits; + __u8 rx_nbits; + __u16 pad; /* If the contents of 'struct spi_ioc_transfer' ever change * incompatibly, then the ioctl number (currently 0) must change; @@ -110,7 +116,7 @@ struct spi_ioc_transfer { #define SPI_IOC_MESSAGE(N) _IOW(SPI_IOC_MAGIC, 0, char[SPI_MSGSIZE(N)]) -/* Read / Write of SPI mode (SPI_MODE_0..SPI_MODE_3) */ +/* Read / Write of SPI mode (SPI_MODE_0..SPI_MODE_3) (limited to 8 bits) */ #define SPI_IOC_RD_MODE _IOR(SPI_IOC_MAGIC, 1, __u8) #define SPI_IOC_WR_MODE _IOW(SPI_IOC_MAGIC, 1, __u8) @@ -126,6 +132,10 @@ struct spi_ioc_transfer { #define SPI_IOC_RD_MAX_SPEED_HZ _IOR(SPI_IOC_MAGIC, 4, __u32) #define SPI_IOC_WR_MAX_SPEED_HZ _IOW(SPI_IOC_MAGIC, 4, __u32) +/* Read / Write of the SPI mode field */ +#define SPI_IOC_RD_MODE32 _IOR(SPI_IOC_MAGIC, 5, __u32) +#define SPI_IOC_WR_MODE32 _IOW(SPI_IOC_MAGIC, 5, __u32) + #endif /* SPIDEV_H */ diff --git a/include/uapi/linux/tc_act/Kbuild b/include/uapi/linux/tc_act/Kbuild index 0623ec4e728..56f121605c9 100644 --- a/include/uapi/linux/tc_act/Kbuild +++ b/include/uapi/linux/tc_act/Kbuild @@ -1,5 +1,6 @@ # UAPI Header export list header-y += tc_csum.h +header-y += tc_defact.h header-y += tc_gact.h header-y += tc_ipt.h header-y += tc_mirred.h diff --git a/include/uapi/linux/tc_act/tc_defact.h b/include/uapi/linux/tc_act/tc_defact.h new file mode 100644 index 00000000000..17dddb40f74 --- /dev/null +++ b/include/uapi/linux/tc_act/tc_defact.h @@ -0,0 +1,19 @@ +#ifndef __LINUX_TC_DEF_H +#define __LINUX_TC_DEF_H + +#include <linux/pkt_cls.h> + +struct tc_defact { + tc_gen; +}; + +enum { + TCA_DEF_UNSPEC, + TCA_DEF_TM, + TCA_DEF_PARMS, + TCA_DEF_DATA, + __TCA_DEF_MAX +}; +#define TCA_DEF_MAX (__TCA_DEF_MAX - 1) + +#endif diff --git a/include/uapi/linux/tc_act/tc_ipt.h b/include/uapi/linux/tc_act/tc_ipt.h index a2335563d21..130aaadf6fa 100644 --- a/include/uapi/linux/tc_act/tc_ipt.h +++ b/include/uapi/linux/tc_act/tc_ipt.h @@ -4,6 +4,7 @@ #include <linux/pkt_cls.h> #define TCA_ACT_IPT 6 +#define TCA_ACT_XT 10 enum { TCA_IPT_UNSPEC, diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h index e962faa5ab0..3b9718328d8 100644 --- a/include/uapi/linux/tcp.h +++ b/include/uapi/linux/tcp.h @@ -102,7 +102,6 @@ enum { #define TCP_QUICKACK 12 /* Block/reenable quick acks */ #define TCP_CONGESTION 13 /* Congestion control algorithm */ #define TCP_MD5SIG 14 /* TCP MD5 Signature (RFC2385) */ -#define TCP_COOKIE_TRANSACTIONS 15 /* TCP Cookie Transactions */ #define TCP_THIN_LINEAR_TIMEOUTS 16 /* Use linear timeouts for thin streams*/ #define TCP_THIN_DUPACK 17 /* Fast retrans. after 1 dupack */ #define TCP_USER_TIMEOUT 18 /* How long for loss retry before timeout */ @@ -111,6 +110,8 @@ enum { #define TCP_QUEUE_SEQ 21 #define TCP_REPAIR_OPTIONS 22 #define TCP_FASTOPEN 23 /* Enable FastOpen on listeners */ +#define TCP_TIMESTAMP 24 +#define TCP_NOTSENT_LOWAT 25 /* limit number of unsent bytes in write queue */ struct tcp_repair_opt { __u32 opt_code; @@ -185,6 +186,9 @@ struct tcp_info { __u32 tcpi_rcv_space; __u32 tcpi_total_retrans; + + __u64 tcpi_pacing_rate; + __u64 tcpi_max_pacing_rate; }; /* for TCP_MD5SIG socket option */ @@ -198,29 +202,4 @@ struct tcp_md5sig { __u8 tcpm_key[TCP_MD5SIG_MAXKEYLEN]; /* key (binary) */ }; -/* for TCP_COOKIE_TRANSACTIONS (TCPCT) socket option */ -#define TCP_COOKIE_MIN 8 /* 64-bits */ -#define TCP_COOKIE_MAX 16 /* 128-bits */ -#define TCP_COOKIE_PAIR_SIZE (2*TCP_COOKIE_MAX) - -/* Flags for both getsockopt and setsockopt */ -#define TCP_COOKIE_IN_ALWAYS (1 << 0) /* Discard SYN without cookie */ -#define TCP_COOKIE_OUT_NEVER (1 << 1) /* Prohibit outgoing cookies, - * supercedes everything. */ - -/* Flags for getsockopt */ -#define TCP_S_DATA_IN (1 << 2) /* Was data received? */ -#define TCP_S_DATA_OUT (1 << 3) /* Was data sent? */ - -/* TCP_COOKIE_TRANSACTIONS data */ -struct tcp_cookie_transactions { - __u16 tcpct_flags; /* see above */ - __u8 __tcpct_pad1; /* zero */ - __u8 tcpct_cookie_desired; /* bytes */ - __u16 tcpct_s_data_desired; /* bytes of variable data */ - __u16 tcpct_used; /* bytes in value */ - __u8 tcpct_value[TCP_MSS_DEFAULT]; -}; - - #endif /* _UAPI_LINUX_TCP_H */ diff --git a/include/uapi/linux/tcp_metrics.h b/include/uapi/linux/tcp_metrics.h index cb5157b55f3..93533926035 100644 --- a/include/uapi/linux/tcp_metrics.h +++ b/include/uapi/linux/tcp_metrics.h @@ -11,12 +11,15 @@ #define TCP_METRICS_GENL_VERSION 0x1 enum tcp_metric_index { - TCP_METRIC_RTT, - TCP_METRIC_RTTVAR, + TCP_METRIC_RTT, /* in ms units */ + TCP_METRIC_RTTVAR, /* in ms units */ TCP_METRIC_SSTHRESH, TCP_METRIC_CWND, TCP_METRIC_REORDERING, + TCP_METRIC_RTT_US, /* in usec units */ + TCP_METRIC_RTTVAR_US, /* in usec units */ + /* Always last. */ __TCP_METRIC_MAX, }; @@ -35,6 +38,8 @@ enum { TCP_METRICS_ATTR_FOPEN_SYN_DROPS, /* u16, count of drops */ TCP_METRICS_ATTR_FOPEN_SYN_DROP_TS, /* msecs age */ TCP_METRICS_ATTR_FOPEN_COOKIE, /* binary */ + TCP_METRICS_ATTR_SADDR_IPV4, /* u32 */ + TCP_METRICS_ATTR_SADDR_IPV6, /* binary */ __TCP_METRICS_ATTR_MAX, }; diff --git a/include/uapi/linux/time.h b/include/uapi/linux/time.h index 0d3c0edc3ed..e75e1b6ff27 100644 --- a/include/uapi/linux/time.h +++ b/include/uapi/linux/time.h @@ -54,11 +54,9 @@ struct itimerval { #define CLOCK_BOOTTIME 7 #define CLOCK_REALTIME_ALARM 8 #define CLOCK_BOOTTIME_ALARM 9 +#define CLOCK_SGI_CYCLE 10 /* Hardware specific */ +#define CLOCK_TAI 11 -/* - * The IDs of various hardware clocks: - */ -#define CLOCK_SGI_CYCLE 10 #define MAX_CLOCKS 16 #define CLOCKS_MASK (CLOCK_REALTIME | CLOCK_MONOTONIC) #define CLOCKS_MONO CLOCK_MONOTONIC diff --git a/include/uapi/linux/timex.h b/include/uapi/linux/timex.h index a7ea81f1371..92685d82644 100644 --- a/include/uapi/linux/timex.h +++ b/include/uapi/linux/timex.h @@ -63,27 +63,27 @@ */ struct timex { unsigned int modes; /* mode selector */ - long offset; /* time offset (usec) */ - long freq; /* frequency offset (scaled ppm) */ - long maxerror; /* maximum error (usec) */ - long esterror; /* estimated error (usec) */ + __kernel_long_t offset; /* time offset (usec) */ + __kernel_long_t freq; /* frequency offset (scaled ppm) */ + __kernel_long_t maxerror;/* maximum error (usec) */ + __kernel_long_t esterror;/* estimated error (usec) */ int status; /* clock command/status */ - long constant; /* pll time constant */ - long precision; /* clock precision (usec) (read only) */ - long tolerance; /* clock frequency tolerance (ppm) - * (read only) - */ + __kernel_long_t constant;/* pll time constant */ + __kernel_long_t precision;/* clock precision (usec) (read only) */ + __kernel_long_t tolerance;/* clock frequency tolerance (ppm) + * (read only) + */ struct timeval time; /* (read only, except for ADJ_SETOFFSET) */ - long tick; /* (modified) usecs between clock ticks */ + __kernel_long_t tick; /* (modified) usecs between clock ticks */ - long ppsfreq; /* pps frequency (scaled ppm) (ro) */ - long jitter; /* pps jitter (us) (ro) */ + __kernel_long_t ppsfreq;/* pps frequency (scaled ppm) (ro) */ + __kernel_long_t jitter; /* pps jitter (us) (ro) */ int shift; /* interval duration (s) (shift) (ro) */ - long stabil; /* pps stability (scaled ppm) (ro) */ - long jitcnt; /* jitter limit exceeded (ro) */ - long calcnt; /* calibration intervals (ro) */ - long errcnt; /* calibration errors (ro) */ - long stbcnt; /* stability limit exceeded (ro) */ + __kernel_long_t stabil; /* pps stability (scaled ppm) (ro) */ + __kernel_long_t jitcnt; /* jitter limit exceeded (ro) */ + __kernel_long_t calcnt; /* calibration intervals (ro) */ + __kernel_long_t errcnt; /* calibration errors (ro) */ + __kernel_long_t stbcnt; /* stability limit exceeded (ro) */ int tai; /* TAI offset (ro) */ diff --git a/include/uapi/linux/tipc.h b/include/uapi/linux/tipc.h index f2d90091cc2..6f71b9b4159 100644 --- a/include/uapi/linux/tipc.h +++ b/include/uapi/linux/tipc.h @@ -1,5 +1,5 @@ /* - * include/linux/tipc.h: Include file for TIPC socket interface + * include/uapi/linux/tipc.h: Header for TIPC socket interface * * Copyright (c) 2003-2006, Ericsson AB * Copyright (c) 2005, 2010-2011, Wind River Systems @@ -38,6 +38,7 @@ #define _LINUX_TIPC_H_ #include <linux/types.h> +#include <linux/sockios.h> /* * TIPC addressing primitives @@ -87,6 +88,7 @@ static inline unsigned int tipc_node(__u32 addr) #define TIPC_CFG_SRV 0 /* configuration service name type */ #define TIPC_TOP_SRV 1 /* topology service name type */ +#define TIPC_LINK_STATE 2 /* link state name type */ #define TIPC_RESERVED_TYPES 64 /* lowest user-publishable name type */ /* @@ -206,4 +208,25 @@ struct sockaddr_tipc { #define TIPC_NODE_RECVQ_DEPTH 131 /* Default: none (read only) */ #define TIPC_SOCK_RECVQ_DEPTH 132 /* Default: none (read only) */ +/* + * Maximum sizes of TIPC bearer-related names (including terminating NULL) + * The string formatting for each name element is: + * media: media + * interface: media:interface name + * link: Z.C.N:interface-Z.C.N:interface + * + */ + +#define TIPC_MAX_MEDIA_NAME 16 +#define TIPC_MAX_IF_NAME 16 +#define TIPC_MAX_BEARER_NAME 32 +#define TIPC_MAX_LINK_NAME 60 + +#define SIOCGETLINKNAME SIOCPROTOPRIVATE + +struct tipc_sioc_ln_req { + __u32 peer; + __u32 bearer_id; + char linkname[TIPC_MAX_LINK_NAME]; +}; #endif diff --git a/include/uapi/linux/tipc_config.h b/include/uapi/linux/tipc_config.h index 0b1e3f218a3..41a76acbb30 100644 --- a/include/uapi/linux/tipc_config.h +++ b/include/uapi/linux/tipc_config.h @@ -1,5 +1,5 @@ /* - * include/linux/tipc_config.h: Include file for TIPC configuration interface + * include/uapi/linux/tipc_config.h: Header for TIPC configuration interface * * Copyright (c) 2003-2006, Ericsson AB * Copyright (c) 2005-2007, 2010-2011, Wind River Systems @@ -39,6 +39,7 @@ #include <linux/types.h> #include <linux/string.h> +#include <linux/tipc.h> #include <asm/byteorder.h> #ifndef __KERNEL__ @@ -155,15 +156,6 @@ #define TIPC_TLV_PORT_REF 26 /* 32-bit port reference */ /* - * Maximum sizes of TIPC bearer-related names (including terminating NUL) - */ - -#define TIPC_MAX_MEDIA_NAME 16 /* format = media */ -#define TIPC_MAX_IF_NAME 16 /* format = interface */ -#define TIPC_MAX_BEARER_NAME 32 /* format = media:interface */ -#define TIPC_MAX_LINK_NAME 60 /* format = Z.C.N:interface-Z.C.N:interface */ - -/* * Link priority limits (min, default, max, media default) */ diff --git a/include/uapi/linux/udp.h b/include/uapi/linux/udp.h index e2bcfd75a30..16574ea18f0 100644 --- a/include/uapi/linux/udp.h +++ b/include/uapi/linux/udp.h @@ -29,6 +29,8 @@ struct udphdr { /* UDP socket options */ #define UDP_CORK 1 /* Never send partially complete segments */ #define UDP_ENCAP 100 /* Set the socket to accept encapsulated packets */ +#define UDP_NO_CHECK6_TX 101 /* Disable sending checksum for UDP6X */ +#define UDP_NO_CHECK6_RX 102 /* Disable accpeting checksum for UDP6 */ /* UDP encapsulation types */ #define UDP_ENCAP_ESPINUDP_NON_IKE 1 /* draft-ietf-ipsec-nat-t-ike-00/01 */ diff --git a/include/uapi/linux/uhid.h b/include/uapi/linux/uhid.h index 9c6974f1696..1e3b09c191c 100644 --- a/include/uapi/linux/uhid.h +++ b/include/uapi/linux/uhid.h @@ -21,6 +21,7 @@ #include <linux/input.h> #include <linux/types.h> +#include <linux/hid.h> enum uhid_event_type { UHID_CREATE, @@ -30,10 +31,12 @@ enum uhid_event_type { UHID_OPEN, UHID_CLOSE, UHID_OUTPUT, - UHID_OUTPUT_EV, + UHID_OUTPUT_EV, /* obsolete! */ UHID_INPUT, UHID_FEATURE, UHID_FEATURE_ANSWER, + UHID_CREATE2, + UHID_INPUT2, }; struct uhid_create_req { @@ -50,6 +53,19 @@ struct uhid_create_req { __u32 country; } __attribute__((__packed__)); +struct uhid_create2_req { + __u8 name[128]; + __u8 phys[64]; + __u8 uniq[64]; + __u16 rd_size; + __u16 bus; + __u32 vendor; + __u32 product; + __u32 version; + __u32 country; + __u8 rd_data[HID_MAX_DESCRIPTOR_SIZE]; +} __attribute__((__packed__)); + #define UHID_DATA_MAX 4096 enum uhid_report_type { @@ -63,12 +79,19 @@ struct uhid_input_req { __u16 size; } __attribute__((__packed__)); +struct uhid_input2_req { + __u16 size; + __u8 data[UHID_DATA_MAX]; +} __attribute__((__packed__)); + struct uhid_output_req { __u8 data[UHID_DATA_MAX]; __u16 size; __u8 rtype; } __attribute__((__packed__)); +/* Obsolete! Newer kernels will no longer send these events but instead convert + * it into raw output reports via UHID_OUTPUT. */ struct uhid_output_ev_req { __u16 type; __u16 code; @@ -86,7 +109,7 @@ struct uhid_feature_answer_req { __u16 err; __u16 size; __u8 data[UHID_DATA_MAX]; -}; +} __attribute__((__packed__)); struct uhid_event { __u32 type; @@ -98,6 +121,8 @@ struct uhid_event { struct uhid_output_ev_req output_ev; struct uhid_feature_req feature; struct uhid_feature_answer_req feature_answer; + struct uhid_create2_req create2; + struct uhid_input2_req input2; } u; } __attribute__((__packed__)); diff --git a/include/uapi/linux/uinput.h b/include/uapi/linux/uinput.h index fe46431593f..0389b489bbb 100644 --- a/include/uapi/linux/uinput.h +++ b/include/uapi/linux/uinput.h @@ -20,6 +20,8 @@ * Author: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org> * * Changes/Revisions: + * 0.4 01/09/2014 (Benjamin Tissoires <benjamin.tissoires@redhat.com>) + * - add UI_GET_SYSNAME ioctl * 0.3 24/05/2006 (Anssi Hannula <anssi.hannulagmail.com>) * - update ff support for the changes in kernel interface * - add UINPUT_VERSION @@ -35,7 +37,7 @@ #include <linux/types.h> #include <linux/input.h> -#define UINPUT_VERSION 3 +#define UINPUT_VERSION 4 struct uinput_ff_upload { @@ -73,6 +75,15 @@ struct uinput_ff_erase { #define UI_BEGIN_FF_ERASE _IOWR(UINPUT_IOCTL_BASE, 202, struct uinput_ff_erase) #define UI_END_FF_ERASE _IOW(UINPUT_IOCTL_BASE, 203, struct uinput_ff_erase) +/** + * UI_GET_SYSNAME - get the sysfs name of the created uinput device + * + * @return the sysfs name of the created virtual input device. + * The complete sysfs path is then /sys/devices/virtual/input/--NAME-- + * Usually, it is in the form "inputN" + */ +#define UI_GET_SYSNAME(len) _IOC(_IOC_READ, UINPUT_IOCTL_BASE, 300, len) + /* * To write a force-feedback-capable driver, the upload_effect * and erase_effect callbacks in input_dev must be implemented. diff --git a/include/uapi/linux/unix_diag.h b/include/uapi/linux/unix_diag.h index b8a24941db2..1eb0b8dd183 100644 --- a/include/uapi/linux/unix_diag.h +++ b/include/uapi/linux/unix_diag.h @@ -31,6 +31,7 @@ struct unix_diag_msg { }; enum { + /* UNIX_DIAG_NONE, standard nl API requires this attribute! */ UNIX_DIAG_NAME, UNIX_DIAG_VFS, UNIX_DIAG_PEER, @@ -39,9 +40,11 @@ enum { UNIX_DIAG_MEMINFO, UNIX_DIAG_SHUTDOWN, - UNIX_DIAG_MAX, + __UNIX_DIAG_MAX, }; +#define UNIX_DIAG_MAX (__UNIX_DIAG_MAX - 1) + struct unix_diag_vfs { __u32 udiag_vfs_ino; __u32 udiag_vfs_dev; diff --git a/include/uapi/linux/usb/Kbuild b/include/uapi/linux/usb/Kbuild index 6cb4ea82683..4cc4d6e7e52 100644 --- a/include/uapi/linux/usb/Kbuild +++ b/include/uapi/linux/usb/Kbuild @@ -1,6 +1,7 @@ # UAPI Header export list header-y += audio.h header-y += cdc.h +header-y += cdc-wdm.h header-y += ch11.h header-y += ch9.h header-y += functionfs.h diff --git a/include/uapi/linux/usb/audio.h b/include/uapi/linux/usb/audio.h index ac90037894d..d2314be4f0c 100644 --- a/include/uapi/linux/usb/audio.h +++ b/include/uapi/linux/usb/audio.h @@ -384,14 +384,16 @@ static inline __u8 uac_processing_unit_iProcessing(struct uac_processing_unit_de int protocol) { __u8 control_size = uac_processing_unit_bControlSize(desc, protocol); - return desc->baSourceID[desc->bNrInPins + control_size]; + return *(uac_processing_unit_bmControls(desc, protocol) + + control_size); } static inline __u8 *uac_processing_unit_specific(struct uac_processing_unit_descriptor *desc, int protocol) { __u8 control_size = uac_processing_unit_bControlSize(desc, protocol); - return &desc->baSourceID[desc->bNrInPins + control_size + 1]; + return uac_processing_unit_bmControls(desc, protocol) + + control_size + 1; } /* 4.5.2 Class-Specific AS Interface Descriptor */ diff --git a/include/uapi/linux/usb/cdc-wdm.h b/include/uapi/linux/usb/cdc-wdm.h new file mode 100644 index 00000000000..0dc132e7503 --- /dev/null +++ b/include/uapi/linux/usb/cdc-wdm.h @@ -0,0 +1,23 @@ +/* + * USB CDC Device Management userspace API definitions + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ + +#ifndef _UAPI__LINUX_USB_CDC_WDM_H +#define _UAPI__LINUX_USB_CDC_WDM_H + +#include <linux/types.h> + +/* + * This IOCTL is used to retrieve the wMaxCommand for the device, + * defining the message limit for both reading and writing. + * + * For CDC WDM functions this will be the wMaxCommand field of the + * Device Management Functional Descriptor. + */ +#define IOCTL_WDM_MAX_COMMAND _IOR('H', 0xA0, __u16) + +#endif /* _UAPI__LINUX_USB_CDC_WDM_H */ diff --git a/include/uapi/linux/usb/cdc.h b/include/uapi/linux/usb/cdc.h index f35aa0a338c..b6a9cdd6e09 100644 --- a/include/uapi/linux/usb/cdc.h +++ b/include/uapi/linux/usb/cdc.h @@ -56,6 +56,7 @@ #define USB_CDC_OBEX_TYPE 0x15 #define USB_CDC_NCM_TYPE 0x1a #define USB_CDC_MBIM_TYPE 0x1b +#define USB_CDC_MBIM_EXTENDED_TYPE 0x1c /* "Header Functional Descriptor" from CDC spec 5.2.3.1 */ struct usb_cdc_header_desc { @@ -205,6 +206,17 @@ struct usb_cdc_mbim_desc { __u8 bmNetworkCapabilities; } __attribute__ ((packed)); +/* "MBIM Extended Functional Descriptor" from CDC MBIM spec 1.0 errata-1 */ +struct usb_cdc_mbim_extended_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __le16 bcdMBIMExtendedVersion; + __u8 bMaxOutstandingCommandMessages; + __le16 wMTU; +} __attribute__ ((packed)); + /*-------------------------------------------------------------------------*/ /* diff --git a/include/uapi/linux/usb/ch11.h b/include/uapi/linux/usb/ch11.h index 7692dc69ccf..331499d597f 100644 --- a/include/uapi/linux/usb/ch11.h +++ b/include/uapi/linux/usb/ch11.h @@ -11,6 +11,17 @@ #include <linux/types.h> /* __u8 etc */ +/* This is arbitrary. + * From USB 2.0 spec Table 11-13, offset 7, a hub can + * have up to 255 ports. The most yet reported is 10. + * + * Current Wireless USB host hardware (Intel i1480 for example) allows + * up to 22 devices to connect. Upcoming hardware might raise that + * limit. Because the arrays need to add a bit for hub status data, we + * use 31, so plus one evens out to four bytes. + */ +#define USB_MAXCHILDREN 31 + /* * Hub request types */ diff --git a/include/uapi/linux/usb/ch9.h b/include/uapi/linux/usb/ch9.h index 50598472dc4..aa33fd1b2d4 100644 --- a/include/uapi/linux/usb/ch9.h +++ b/include/uapi/linux/usb/ch9.h @@ -138,7 +138,7 @@ /* * New Feature Selectors as added by USB 3.0 - * See USB 3.0 spec Table 9-6 + * See USB 3.0 spec Table 9-7 */ #define USB_DEVICE_U1_ENABLE 48 /* dev may initiate U1 transition */ #define USB_DEVICE_U2_ENABLE 49 /* dev may initiate U2 transition */ @@ -147,11 +147,17 @@ #define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00 /* - * Suspend Options, Table 9-7 USB 3.0 spec + * Suspend Options, Table 9-8 USB 3.0 spec */ #define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0)) #define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1)) +/* + * Interface status, Figure 9-5 USB 3.0 spec + */ +#define USB_INTRF_STAT_FUNC_RW_CAP 1 +#define USB_INTRF_STAT_FUNC_RW 2 + #define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */ /* Bit array elements as returned by the USB_REQ_GET_STATUS request. */ diff --git a/include/uapi/linux/usb/functionfs.h b/include/uapi/linux/usb/functionfs.h index d6b01283f85..24b68c59dcf 100644 --- a/include/uapi/linux/usb/functionfs.h +++ b/include/uapi/linux/usb/functionfs.h @@ -10,9 +10,15 @@ enum { FUNCTIONFS_DESCRIPTORS_MAGIC = 1, - FUNCTIONFS_STRINGS_MAGIC = 2 + FUNCTIONFS_STRINGS_MAGIC = 2, + FUNCTIONFS_DESCRIPTORS_MAGIC_V2 = 3, }; +enum functionfs_flags { + FUNCTIONFS_HAS_FS_DESC = 1, + FUNCTIONFS_HAS_HS_DESC = 2, + FUNCTIONFS_HAS_SS_DESC = 4, +}; #ifndef __KERNEL__ @@ -27,31 +33,48 @@ struct usb_endpoint_descriptor_no_audio { __u8 bInterval; } __attribute__((packed)); - -/* - * All numbers must be in little endian order. - */ - +/* Legacy format, deprecated as of 3.14. */ struct usb_functionfs_descs_head { __le32 magic; __le32 length; __le32 fs_count; __le32 hs_count; -} __attribute__((packed)); +} __attribute__((packed, deprecated)); /* * Descriptors format: * * | off | name | type | description | * |-----+-----------+--------------+--------------------------------------| - * | 0 | magic | LE32 | FUNCTIONFS_{FS,HS}_DESCRIPTORS_MAGIC | + * | 0 | magic | LE32 | FUNCTIONFS_DESCRIPTORS_MAGIC_V2 | + * | 4 | length | LE32 | length of the whole data chunk | + * | 8 | flags | LE32 | combination of functionfs_flags | + * | | fs_count | LE32 | number of full-speed descriptors | + * | | hs_count | LE32 | number of high-speed descriptors | + * | | ss_count | LE32 | number of super-speed descriptors | + * | | fs_descrs | Descriptor[] | list of full-speed descriptors | + * | | hs_descrs | Descriptor[] | list of high-speed descriptors | + * | | ss_descrs | Descriptor[] | list of super-speed descriptors | + * + * Depending on which flags are set, various fields may be missing in the + * structure. Any flags that are not recognised cause the whole block to be + * rejected with -ENOSYS. + * + * Legacy descriptors format: + * + * | off | name | type | description | + * |-----+-----------+--------------+--------------------------------------| + * | 0 | magic | LE32 | FUNCTIONFS_DESCRIPTORS_MAGIC | * | 4 | length | LE32 | length of the whole data chunk | * | 8 | fs_count | LE32 | number of full-speed descriptors | * | 12 | hs_count | LE32 | number of high-speed descriptors | * | 16 | fs_descrs | Descriptor[] | list of full-speed descriptors | * | | hs_descrs | Descriptor[] | list of high-speed descriptors | * - * descs are just valid USB descriptors and have the following format: + * All numbers must be in little endian order. + * + * Descriptor[] is an array of valid USB descriptors which have the following + * format: * * | off | name | type | description | * |-----+-----------------+------+--------------------------| diff --git a/include/uapi/linux/usbdevice_fs.h b/include/uapi/linux/usbdevice_fs.h index 0c65e4b1261..abe5f4bd4d8 100644 --- a/include/uapi/linux/usbdevice_fs.h +++ b/include/uapi/linux/usbdevice_fs.h @@ -102,7 +102,10 @@ struct usbdevfs_urb { int buffer_length; int actual_length; int start_frame; - int number_of_packets; + union { + int number_of_packets; /* Only used for isoc urbs */ + unsigned int stream_id; /* Only used with bulk streams */ + }; int error_count; unsigned int signr; /* signal to be sent on completion, or 0 if none should be sent. */ @@ -144,6 +147,11 @@ struct usbdevfs_disconnect_claim { char driver[USBDEVFS_MAXDRIVERNAME + 1]; }; +struct usbdevfs_streams { + unsigned int num_streams; /* Not used by USBDEVFS_FREE_STREAMS */ + unsigned int num_eps; + unsigned char eps[0]; +}; #define USBDEVFS_CONTROL _IOWR('U', 0, struct usbdevfs_ctrltransfer) #define USBDEVFS_CONTROL32 _IOWR('U', 0, struct usbdevfs_ctrltransfer32) @@ -176,5 +184,7 @@ struct usbdevfs_disconnect_claim { #define USBDEVFS_RELEASE_PORT _IOR('U', 25, unsigned int) #define USBDEVFS_GET_CAPABILITIES _IOR('U', 26, __u32) #define USBDEVFS_DISCONNECT_CLAIM _IOR('U', 27, struct usbdevfs_disconnect_claim) +#define USBDEVFS_ALLOC_STREAMS _IOR('U', 28, struct usbdevfs_streams) +#define USBDEVFS_FREE_STREAMS _IOR('U', 29, struct usbdevfs_streams) #endif /* _UAPI_LINUX_USBDEVICE_FS_H */ diff --git a/include/uapi/linux/v4l2-common.h b/include/uapi/linux/v4l2-common.h index 4f0667e010d..2f6f8cafe77 100644 --- a/include/uapi/linux/v4l2-common.h +++ b/include/uapi/linux/v4l2-common.h @@ -29,6 +29,8 @@ #ifndef __V4L2_COMMON__ #define __V4L2_COMMON__ +#include <linux/types.h> + /* * * Selection interface definitions @@ -68,4 +70,12 @@ #define V4L2_SUBDEV_SEL_FLAG_SIZE_LE V4L2_SEL_FLAG_LE #define V4L2_SUBDEV_SEL_FLAG_KEEP_CONFIG V4L2_SEL_FLAG_KEEP_CONFIG +struct v4l2_edid { + __u32 pad; + __u32 start_block; + __u32 blocks; + __u32 reserved[5]; + __u8 *edid; +}; + #endif /* __V4L2_COMMON__ */ diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index f56c945cecd..2ac5597f3ee 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -53,12 +53,14 @@ #define V4L2_CTRL_CLASS_USER 0x00980000 /* Old-style 'user' controls */ #define V4L2_CTRL_CLASS_MPEG 0x00990000 /* MPEG-compression controls */ #define V4L2_CTRL_CLASS_CAMERA 0x009a0000 /* Camera class controls */ -#define V4L2_CTRL_CLASS_FM_TX 0x009b0000 /* FM Modulator control class */ +#define V4L2_CTRL_CLASS_FM_TX 0x009b0000 /* FM Modulator controls */ #define V4L2_CTRL_CLASS_FLASH 0x009c0000 /* Camera flash controls */ #define V4L2_CTRL_CLASS_JPEG 0x009d0000 /* JPEG-compression controls */ #define V4L2_CTRL_CLASS_IMAGE_SOURCE 0x009e0000 /* Image source controls */ #define V4L2_CTRL_CLASS_IMAGE_PROC 0x009f0000 /* Image processing controls */ #define V4L2_CTRL_CLASS_DV 0x00a00000 /* Digital Video controls */ +#define V4L2_CTRL_CLASS_FM_RX 0x00a10000 /* FM Receiver controls */ +#define V4L2_CTRL_CLASS_RF_TUNER 0x00a20000 /* RF tuner controls */ /* User-class control IDs */ @@ -88,10 +90,6 @@ #define V4L2_CID_HFLIP (V4L2_CID_BASE+20) #define V4L2_CID_VFLIP (V4L2_CID_BASE+21) -/* Deprecated; use V4L2_CID_PAN_RESET and V4L2_CID_TILT_RESET */ -#define V4L2_CID_HCENTER (V4L2_CID_BASE+22) -#define V4L2_CID_VCENTER (V4L2_CID_BASE+23) - #define V4L2_CID_POWER_LINE_FREQUENCY (V4L2_CID_BASE+24) enum v4l2_power_line_frequency { V4L2_CID_POWER_LINE_FREQUENCY_DISABLED = 0, @@ -144,8 +142,36 @@ enum v4l2_colorfx { /* last CID + 1 */ #define V4L2_CID_LASTP1 (V4L2_CID_BASE+43) +/* USER-class private control IDs */ + +/* The base for the meye driver controls. See linux/meye.h for the list + * of controls. We reserve 16 controls for this driver. */ +#define V4L2_CID_USER_MEYE_BASE (V4L2_CID_USER_BASE + 0x1000) + +/* The base for the bttv driver controls. + * We reserve 32 controls for this driver. */ +#define V4L2_CID_USER_BTTV_BASE (V4L2_CID_USER_BASE + 0x1010) + + +/* The base for the s2255 driver controls. + * We reserve 16 controls for this driver. */ +#define V4L2_CID_USER_S2255_BASE (V4L2_CID_USER_BASE + 0x1030) + +/* The base for the si476x driver controls. See include/media/si476x.h for the list + * of controls. Total of 16 controls is reserved for this driver */ +#define V4L2_CID_USER_SI476X_BASE (V4L2_CID_USER_BASE + 0x1040) + +/* The base for the TI VPE driver controls. Total of 16 controls is reserved for + * this driver */ +#define V4L2_CID_USER_TI_VPE_BASE (V4L2_CID_USER_BASE + 0x1050) + +/* The base for the saa7134 driver controls. + * We reserve 16 controls for this driver. */ +#define V4L2_CID_USER_SAA7134_BASE (V4L2_CID_USER_BASE + 0x1060) /* MPEG-class control IDs */ +/* The MPEG controls are applicable to all codec controls + * and the 'MPEG' part of the define is historical */ #define V4L2_CID_MPEG_BASE (V4L2_CTRL_CLASS_MPEG | 0x900) #define V4L2_CID_MPEG_CLASS (V4L2_CTRL_CLASS_MPEG | 1) @@ -350,6 +376,9 @@ enum v4l2_mpeg_video_multi_slice_mode { #define V4L2_CID_MPEG_VIDEO_DEC_PTS (V4L2_CID_MPEG_BASE+223) #define V4L2_CID_MPEG_VIDEO_DEC_FRAME (V4L2_CID_MPEG_BASE+224) #define V4L2_CID_MPEG_VIDEO_VBV_DELAY (V4L2_CID_MPEG_BASE+225) +#define V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER (V4L2_CID_MPEG_BASE+226) +#define V4L2_CID_MPEG_VIDEO_MV_H_SEARCH_RANGE (V4L2_CID_MPEG_BASE+227) +#define V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE (V4L2_CID_MPEG_BASE+228) #define V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP (V4L2_CID_MPEG_BASE+300) #define V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP (V4L2_CID_MPEG_BASE+301) @@ -506,6 +535,38 @@ enum v4l2_mpeg_video_mpeg4_profile { }; #define V4L2_CID_MPEG_VIDEO_MPEG4_QPEL (V4L2_CID_MPEG_BASE+407) +/* Control IDs for VP8 streams + * Although VP8 is not part of MPEG we add these controls to the MPEG class + * as that class is already handling other video compression standards + */ +#define V4L2_CID_MPEG_VIDEO_VPX_NUM_PARTITIONS (V4L2_CID_MPEG_BASE+500) +enum v4l2_vp8_num_partitions { + V4L2_CID_MPEG_VIDEO_VPX_1_PARTITION = 0, + V4L2_CID_MPEG_VIDEO_VPX_2_PARTITIONS = 1, + V4L2_CID_MPEG_VIDEO_VPX_4_PARTITIONS = 2, + V4L2_CID_MPEG_VIDEO_VPX_8_PARTITIONS = 3, +}; +#define V4L2_CID_MPEG_VIDEO_VPX_IMD_DISABLE_4X4 (V4L2_CID_MPEG_BASE+501) +#define V4L2_CID_MPEG_VIDEO_VPX_NUM_REF_FRAMES (V4L2_CID_MPEG_BASE+502) +enum v4l2_vp8_num_ref_frames { + V4L2_CID_MPEG_VIDEO_VPX_1_REF_FRAME = 0, + V4L2_CID_MPEG_VIDEO_VPX_2_REF_FRAME = 1, + V4L2_CID_MPEG_VIDEO_VPX_3_REF_FRAME = 2, +}; +#define V4L2_CID_MPEG_VIDEO_VPX_FILTER_LEVEL (V4L2_CID_MPEG_BASE+503) +#define V4L2_CID_MPEG_VIDEO_VPX_FILTER_SHARPNESS (V4L2_CID_MPEG_BASE+504) +#define V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_REF_PERIOD (V4L2_CID_MPEG_BASE+505) +#define V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL (V4L2_CID_MPEG_BASE+506) +enum v4l2_vp8_golden_frame_sel { + V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_USE_PREV = 0, + V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_USE_REF_PERIOD = 1, +}; +#define V4L2_CID_MPEG_VIDEO_VPX_MIN_QP (V4L2_CID_MPEG_BASE+507) +#define V4L2_CID_MPEG_VIDEO_VPX_MAX_QP (V4L2_CID_MPEG_BASE+508) +#define V4L2_CID_MPEG_VIDEO_VPX_I_FRAME_QP (V4L2_CID_MPEG_BASE+509) +#define V4L2_CID_MPEG_VIDEO_VPX_P_FRAME_QP (V4L2_CID_MPEG_BASE+510) +#define V4L2_CID_MPEG_VIDEO_VPX_PROFILE (V4L2_CID_MPEG_BASE+511) + /* MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */ #define V4L2_CID_MPEG_CX2341X_BASE (V4L2_CTRL_CLASS_MPEG | 0x1000) #define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE (V4L2_CID_MPEG_CX2341X_BASE+0) @@ -642,6 +703,7 @@ enum v4l2_exposure_metering { V4L2_EXPOSURE_METERING_AVERAGE = 0, V4L2_EXPOSURE_METERING_CENTER_WEIGHTED = 1, V4L2_EXPOSURE_METERING_SPOT = 2, + V4L2_EXPOSURE_METERING_MATRIX = 3, }; #define V4L2_CID_SCENE_MODE (V4L2_CID_CAMERA_CLASS_BASE+26) @@ -753,6 +815,9 @@ enum v4l2_flash_strobe_source { #define V4L2_FLASH_FAULT_SHORT_CIRCUIT (1 << 3) #define V4L2_FLASH_FAULT_OVER_CURRENT (1 << 4) #define V4L2_FLASH_FAULT_INDICATOR (1 << 5) +#define V4L2_FLASH_FAULT_UNDER_VOLTAGE (1 << 6) +#define V4L2_FLASH_FAULT_INPUT_VOLTAGE (1 << 7) +#define V4L2_FLASH_FAULT_LED_OVER_TEMPERATURE (1 << 8) #define V4L2_CID_FLASH_CHARGE (V4L2_CID_FLASH_CLASS_BASE + 11) #define V4L2_CID_FLASH_READY (V4L2_CID_FLASH_CLASS_BASE + 12) @@ -782,6 +847,7 @@ enum v4l2_jpeg_chroma_subsampling { #define V4L2_JPEG_ACTIVE_MARKER_DQT (1 << 17) #define V4L2_JPEG_ACTIVE_MARKER_DHT (1 << 18) + /* Image source controls */ #define V4L2_CID_IMAGE_SOURCE_CLASS_BASE (V4L2_CTRL_CLASS_IMAGE_SOURCE | 0x900) #define V4L2_CID_IMAGE_SOURCE_CLASS (V4L2_CTRL_CLASS_IMAGE_SOURCE | 1) @@ -800,4 +866,52 @@ enum v4l2_jpeg_chroma_subsampling { #define V4L2_CID_PIXEL_RATE (V4L2_CID_IMAGE_PROC_CLASS_BASE + 2) #define V4L2_CID_TEST_PATTERN (V4L2_CID_IMAGE_PROC_CLASS_BASE + 3) + +/* DV-class control IDs defined by V4L2 */ +#define V4L2_CID_DV_CLASS_BASE (V4L2_CTRL_CLASS_DV | 0x900) +#define V4L2_CID_DV_CLASS (V4L2_CTRL_CLASS_DV | 1) + +#define V4L2_CID_DV_TX_HOTPLUG (V4L2_CID_DV_CLASS_BASE + 1) +#define V4L2_CID_DV_TX_RXSENSE (V4L2_CID_DV_CLASS_BASE + 2) +#define V4L2_CID_DV_TX_EDID_PRESENT (V4L2_CID_DV_CLASS_BASE + 3) +#define V4L2_CID_DV_TX_MODE (V4L2_CID_DV_CLASS_BASE + 4) +enum v4l2_dv_tx_mode { + V4L2_DV_TX_MODE_DVI_D = 0, + V4L2_DV_TX_MODE_HDMI = 1, +}; +#define V4L2_CID_DV_TX_RGB_RANGE (V4L2_CID_DV_CLASS_BASE + 5) +enum v4l2_dv_rgb_range { + V4L2_DV_RGB_RANGE_AUTO = 0, + V4L2_DV_RGB_RANGE_LIMITED = 1, + V4L2_DV_RGB_RANGE_FULL = 2, +}; + +#define V4L2_CID_DV_RX_POWER_PRESENT (V4L2_CID_DV_CLASS_BASE + 100) +#define V4L2_CID_DV_RX_RGB_RANGE (V4L2_CID_DV_CLASS_BASE + 101) + +#define V4L2_CID_FM_RX_CLASS_BASE (V4L2_CTRL_CLASS_FM_RX | 0x900) +#define V4L2_CID_FM_RX_CLASS (V4L2_CTRL_CLASS_FM_RX | 1) + +#define V4L2_CID_TUNE_DEEMPHASIS (V4L2_CID_FM_RX_CLASS_BASE + 1) +enum v4l2_deemphasis { + V4L2_DEEMPHASIS_DISABLED = V4L2_PREEMPHASIS_DISABLED, + V4L2_DEEMPHASIS_50_uS = V4L2_PREEMPHASIS_50_uS, + V4L2_DEEMPHASIS_75_uS = V4L2_PREEMPHASIS_75_uS, +}; + +#define V4L2_CID_RDS_RECEPTION (V4L2_CID_FM_RX_CLASS_BASE + 2) + +#define V4L2_CID_RF_TUNER_CLASS_BASE (V4L2_CTRL_CLASS_RF_TUNER | 0x900) +#define V4L2_CID_RF_TUNER_CLASS (V4L2_CTRL_CLASS_RF_TUNER | 1) + +#define V4L2_CID_RF_TUNER_BANDWIDTH_AUTO (V4L2_CID_RF_TUNER_CLASS_BASE + 11) +#define V4L2_CID_RF_TUNER_BANDWIDTH (V4L2_CID_RF_TUNER_CLASS_BASE + 12) +#define V4L2_CID_RF_TUNER_LNA_GAIN_AUTO (V4L2_CID_RF_TUNER_CLASS_BASE + 41) +#define V4L2_CID_RF_TUNER_LNA_GAIN (V4L2_CID_RF_TUNER_CLASS_BASE + 42) +#define V4L2_CID_RF_TUNER_MIXER_GAIN_AUTO (V4L2_CID_RF_TUNER_CLASS_BASE + 51) +#define V4L2_CID_RF_TUNER_MIXER_GAIN (V4L2_CID_RF_TUNER_CLASS_BASE + 52) +#define V4L2_CID_RF_TUNER_IF_GAIN_AUTO (V4L2_CID_RF_TUNER_CLASS_BASE + 61) +#define V4L2_CID_RF_TUNER_IF_GAIN (V4L2_CID_RF_TUNER_CLASS_BASE + 62) +#define V4L2_CID_RF_TUNER_PLL_LOCK (V4L2_CID_RF_TUNER_CLASS_BASE + 91) + #endif diff --git a/include/uapi/linux/v4l2-dv-timings.h b/include/uapi/linux/v4l2-dv-timings.h index 9ef8172e5ed..6c8f159e416 100644 --- a/include/uapi/linux/v4l2-dv-timings.h +++ b/include/uapi/linux/v4l2-dv-timings.h @@ -42,6 +42,15 @@ V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CEA861, 0) \ } +/* Note: these are the nominal timings, for HDMI links this format is typically + * double-clocked to meet the minimum pixelclock requirements. */ +#define V4L2_DV_BT_CEA_720X480I59_94 { \ + .type = V4L2_DV_BT_656_1120, \ + V4L2_INIT_BT_TIMINGS(720, 480, 1, 0, \ + 13500000, 19, 62, 57, 4, 3, 15, 4, 3, 16, \ + V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_HALF_LINE) \ +} + #define V4L2_DV_BT_CEA_720X480P59_94 { \ .type = V4L2_DV_BT_656_1120, \ V4L2_INIT_BT_TIMINGS(720, 480, 0, 0, \ @@ -49,6 +58,15 @@ V4L2_DV_BT_STD_CEA861, 0) \ } +/* Note: these are the nominal timings, for HDMI links this format is typically + * double-clocked to meet the minimum pixelclock requirements. */ +#define V4L2_DV_BT_CEA_720X576I50 { \ + .type = V4L2_DV_BT_656_1120, \ + V4L2_INIT_BT_TIMINGS(720, 576, 1, 0, \ + 13500000, 12, 63, 69, 2, 3, 19, 2, 3, 20, \ + V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_HALF_LINE) \ +} + #define V4L2_DV_BT_CEA_720X576P50 { \ .type = V4L2_DV_BT_656_1120, \ V4L2_INIT_BT_TIMINGS(720, 576, 0, 0, \ @@ -155,6 +173,76 @@ V4L2_DV_FL_CAN_REDUCE_FPS) \ } +#define V4L2_DV_BT_CEA_3840X2160P24 { \ + .type = V4L2_DV_BT_656_1120, \ + V4L2_INIT_BT_TIMINGS(3840, 2160, 0, V4L2_DV_HSYNC_POS_POL, \ + 297000000, 1276, 88, 296, 8, 10, 72, 0, 0, 0, \ + V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_CAN_REDUCE_FPS) \ +} + +#define V4L2_DV_BT_CEA_3840X2160P25 { \ + .type = V4L2_DV_BT_656_1120, \ + V4L2_INIT_BT_TIMINGS(3840, 2160, 0, V4L2_DV_HSYNC_POS_POL, \ + 297000000, 1056, 88, 296, 8, 10, 72, 0, 0, 0, \ + V4L2_DV_BT_STD_CEA861, 0) \ +} + +#define V4L2_DV_BT_CEA_3840X2160P30 { \ + .type = V4L2_DV_BT_656_1120, \ + V4L2_INIT_BT_TIMINGS(3840, 2160, 0, V4L2_DV_HSYNC_POS_POL, \ + 297000000, 176, 88, 296, 8, 10, 72, 0, 0, 0, \ + V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_CAN_REDUCE_FPS) \ +} + +#define V4L2_DV_BT_CEA_3840X2160P50 { \ + .type = V4L2_DV_BT_656_1120, \ + V4L2_INIT_BT_TIMINGS(3840, 2160, 0, V4L2_DV_HSYNC_POS_POL, \ + 594000000, 1056, 88, 296, 8, 10, 72, 0, 0, 0, \ + V4L2_DV_BT_STD_CEA861, 0) \ +} + +#define V4L2_DV_BT_CEA_3840X2160P60 { \ + .type = V4L2_DV_BT_656_1120, \ + V4L2_INIT_BT_TIMINGS(3840, 2160, 0, V4L2_DV_HSYNC_POS_POL, \ + 594000000, 176, 88, 296, 8, 10, 72, 0, 0, 0, \ + V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_CAN_REDUCE_FPS) \ +} + +#define V4L2_DV_BT_CEA_4096X2160P24 { \ + .type = V4L2_DV_BT_656_1120, \ + V4L2_INIT_BT_TIMINGS(4096, 2160, 0, V4L2_DV_HSYNC_POS_POL, \ + 297000000, 1020, 88, 296, 8, 10, 72, 0, 0, 0, \ + V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_CAN_REDUCE_FPS) \ +} + +#define V4L2_DV_BT_CEA_4096X2160P25 { \ + .type = V4L2_DV_BT_656_1120, \ + V4L2_INIT_BT_TIMINGS(4096, 2160, 0, V4L2_DV_HSYNC_POS_POL, \ + 297000000, 968, 88, 128, 8, 10, 72, 0, 0, 0, \ + V4L2_DV_BT_STD_CEA861, 0) \ +} + +#define V4L2_DV_BT_CEA_4096X2160P30 { \ + .type = V4L2_DV_BT_656_1120, \ + V4L2_INIT_BT_TIMINGS(4096, 2160, 0, V4L2_DV_HSYNC_POS_POL, \ + 297000000, 88, 88, 128, 8, 10, 72, 0, 0, 0, \ + V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_CAN_REDUCE_FPS) \ +} + +#define V4L2_DV_BT_CEA_4096X2160P50 { \ + .type = V4L2_DV_BT_656_1120, \ + V4L2_INIT_BT_TIMINGS(4096, 2160, 0, V4L2_DV_HSYNC_POS_POL, \ + 594000000, 968, 88, 128, 8, 10, 72, 0, 0, 0, \ + V4L2_DV_BT_STD_CEA861, 0) \ +} + +#define V4L2_DV_BT_CEA_4096X2160P60 { \ + .type = V4L2_DV_BT_656_1120, \ + V4L2_INIT_BT_TIMINGS(4096, 2160, 0, V4L2_DV_HSYNC_POS_POL, \ + 594000000, 88, 88, 128, 8, 10, 72, 0, 0, 0, \ + V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_CAN_REDUCE_FPS) \ +} + /* VESA Discrete Monitor Timings as per version 1.0, revision 12 */ @@ -805,12 +893,21 @@ V4L2_DV_FL_REDUCED_BLANKING) \ } -#define V4L2_DV_BT_DMT_1366X768P60 { \ +/* 4K resolutions */ +#define V4L2_DV_BT_DMT_4096X2160P60_RB { \ .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1366, 768, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 85500000, 70, 143, 213, 3, 3, 24, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ + V4L2_INIT_BT_TIMINGS(4096, 2160, 0, V4L2_DV_HSYNC_POS_POL, \ + 556744000, 8, 32, 40, 48, 8, 6, 0, 0, 0, \ + V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \ + V4L2_DV_FL_REDUCED_BLANKING) \ +} + +#define V4L2_DV_BT_DMT_4096X2160P59_94_RB { \ + .type = V4L2_DV_BT_656_1120, \ + V4L2_INIT_BT_TIMINGS(4096, 2160, 0, V4L2_DV_HSYNC_POS_POL, \ + 556188000, 8, 32, 40, 48, 8, 6, 0, 0, 0, \ + V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \ + V4L2_DV_FL_REDUCED_BLANKING) \ } #endif diff --git a/include/uapi/linux/v4l2-mediabus.h b/include/uapi/linux/v4l2-mediabus.h index 7d64e0e1a18..1445e858854 100644 --- a/include/uapi/linux/v4l2-mediabus.h +++ b/include/uapi/linux/v4l2-mediabus.h @@ -37,7 +37,7 @@ enum v4l2_mbus_pixelcode { V4L2_MBUS_FMT_FIXED = 0x0001, - /* RGB - next is 0x1009 */ + /* RGB - next is 0x100e */ V4L2_MBUS_FMT_RGB444_2X8_PADHI_BE = 0x1001, V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE = 0x1002, V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE = 0x1003, @@ -46,9 +46,15 @@ enum v4l2_mbus_pixelcode { V4L2_MBUS_FMT_BGR565_2X8_LE = 0x1006, V4L2_MBUS_FMT_RGB565_2X8_BE = 0x1007, V4L2_MBUS_FMT_RGB565_2X8_LE = 0x1008, + V4L2_MBUS_FMT_RGB666_1X18 = 0x1009, + V4L2_MBUS_FMT_RGB888_1X24 = 0x100a, + V4L2_MBUS_FMT_RGB888_2X12_BE = 0x100b, + V4L2_MBUS_FMT_RGB888_2X12_LE = 0x100c, + V4L2_MBUS_FMT_ARGB8888_1X32 = 0x100d, - /* YUV (including grey) - next is 0x2014 */ + /* YUV (including grey) - next is 0x2024 */ V4L2_MBUS_FMT_Y8_1X8 = 0x2001, + V4L2_MBUS_FMT_UV8_1X8 = 0x2015, V4L2_MBUS_FMT_UYVY8_1_5X8 = 0x2002, V4L2_MBUS_FMT_VYUY8_1_5X8 = 0x2003, V4L2_MBUS_FMT_YUYV8_1_5X8 = 0x2004, @@ -58,6 +64,8 @@ enum v4l2_mbus_pixelcode { V4L2_MBUS_FMT_YUYV8_2X8 = 0x2008, V4L2_MBUS_FMT_YVYU8_2X8 = 0x2009, V4L2_MBUS_FMT_Y10_1X10 = 0x200a, + V4L2_MBUS_FMT_UYVY10_2X10 = 0x2018, + V4L2_MBUS_FMT_VYUY10_2X10 = 0x2019, V4L2_MBUS_FMT_YUYV10_2X10 = 0x200b, V4L2_MBUS_FMT_YVYU10_2X10 = 0x200c, V4L2_MBUS_FMT_Y12_1X12 = 0x2013, @@ -65,14 +73,31 @@ enum v4l2_mbus_pixelcode { V4L2_MBUS_FMT_VYUY8_1X16 = 0x2010, V4L2_MBUS_FMT_YUYV8_1X16 = 0x2011, V4L2_MBUS_FMT_YVYU8_1X16 = 0x2012, + V4L2_MBUS_FMT_YDYUYDYV8_1X16 = 0x2014, + V4L2_MBUS_FMT_UYVY10_1X20 = 0x201a, + V4L2_MBUS_FMT_VYUY10_1X20 = 0x201b, V4L2_MBUS_FMT_YUYV10_1X20 = 0x200d, V4L2_MBUS_FMT_YVYU10_1X20 = 0x200e, + V4L2_MBUS_FMT_YUV10_1X30 = 0x2016, + V4L2_MBUS_FMT_AYUV8_1X32 = 0x2017, + V4L2_MBUS_FMT_UYVY12_2X12 = 0x201c, + V4L2_MBUS_FMT_VYUY12_2X12 = 0x201d, + V4L2_MBUS_FMT_YUYV12_2X12 = 0x201e, + V4L2_MBUS_FMT_YVYU12_2X12 = 0x201f, + V4L2_MBUS_FMT_UYVY12_1X24 = 0x2020, + V4L2_MBUS_FMT_VYUY12_1X24 = 0x2021, + V4L2_MBUS_FMT_YUYV12_1X24 = 0x2022, + V4L2_MBUS_FMT_YVYU12_1X24 = 0x2023, - /* Bayer - next is 0x3015 */ + /* Bayer - next is 0x3019 */ V4L2_MBUS_FMT_SBGGR8_1X8 = 0x3001, V4L2_MBUS_FMT_SGBRG8_1X8 = 0x3013, V4L2_MBUS_FMT_SGRBG8_1X8 = 0x3002, V4L2_MBUS_FMT_SRGGB8_1X8 = 0x3014, + V4L2_MBUS_FMT_SBGGR10_ALAW8_1X8 = 0x3015, + V4L2_MBUS_FMT_SGBRG10_ALAW8_1X8 = 0x3016, + V4L2_MBUS_FMT_SGRBG10_ALAW8_1X8 = 0x3017, + V4L2_MBUS_FMT_SRGGB10_ALAW8_1X8 = 0x3018, V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8 = 0x300b, V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8 = 0x300c, V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8 = 0x3009, @@ -97,6 +122,9 @@ enum v4l2_mbus_pixelcode { /* S5C73M3 sensor specific interleaved UYVY and JPEG */ V4L2_MBUS_FMT_S5C_UYVY_JPEG_1X8 = 0x5001, + + /* HSV - next is 0x6002 */ + V4L2_MBUS_FMT_AHSV8888_1X32 = 0x6001, }; /** diff --git a/include/uapi/linux/v4l2-subdev.h b/include/uapi/linux/v4l2-subdev.h index a33c4daadce..a619cdd300a 100644 --- a/include/uapi/linux/v4l2-subdev.h +++ b/include/uapi/linux/v4l2-subdev.h @@ -148,33 +148,27 @@ struct v4l2_subdev_selection { __u32 reserved[8]; }; -struct v4l2_subdev_edid { - __u32 pad; - __u32 start_block; - __u32 blocks; - __u32 reserved[5]; - __u8 __user *edid; -}; +/* Backwards compatibility define --- to be removed */ +#define v4l2_subdev_edid v4l2_edid -#define VIDIOC_SUBDEV_G_FMT _IOWR('V', 4, struct v4l2_subdev_format) -#define VIDIOC_SUBDEV_S_FMT _IOWR('V', 5, struct v4l2_subdev_format) -#define VIDIOC_SUBDEV_G_FRAME_INTERVAL \ - _IOWR('V', 21, struct v4l2_subdev_frame_interval) -#define VIDIOC_SUBDEV_S_FRAME_INTERVAL \ - _IOWR('V', 22, struct v4l2_subdev_frame_interval) -#define VIDIOC_SUBDEV_ENUM_MBUS_CODE \ - _IOWR('V', 2, struct v4l2_subdev_mbus_code_enum) -#define VIDIOC_SUBDEV_ENUM_FRAME_SIZE \ - _IOWR('V', 74, struct v4l2_subdev_frame_size_enum) -#define VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL \ - _IOWR('V', 75, struct v4l2_subdev_frame_interval_enum) -#define VIDIOC_SUBDEV_G_CROP _IOWR('V', 59, struct v4l2_subdev_crop) -#define VIDIOC_SUBDEV_S_CROP _IOWR('V', 60, struct v4l2_subdev_crop) -#define VIDIOC_SUBDEV_G_SELECTION \ - _IOWR('V', 61, struct v4l2_subdev_selection) -#define VIDIOC_SUBDEV_S_SELECTION \ - _IOWR('V', 62, struct v4l2_subdev_selection) -#define VIDIOC_SUBDEV_G_EDID _IOWR('V', 40, struct v4l2_subdev_edid) -#define VIDIOC_SUBDEV_S_EDID _IOWR('V', 41, struct v4l2_subdev_edid) +#define VIDIOC_SUBDEV_G_FMT _IOWR('V', 4, struct v4l2_subdev_format) +#define VIDIOC_SUBDEV_S_FMT _IOWR('V', 5, struct v4l2_subdev_format) +#define VIDIOC_SUBDEV_G_FRAME_INTERVAL _IOWR('V', 21, struct v4l2_subdev_frame_interval) +#define VIDIOC_SUBDEV_S_FRAME_INTERVAL _IOWR('V', 22, struct v4l2_subdev_frame_interval) +#define VIDIOC_SUBDEV_ENUM_MBUS_CODE _IOWR('V', 2, struct v4l2_subdev_mbus_code_enum) +#define VIDIOC_SUBDEV_ENUM_FRAME_SIZE _IOWR('V', 74, struct v4l2_subdev_frame_size_enum) +#define VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL _IOWR('V', 75, struct v4l2_subdev_frame_interval_enum) +#define VIDIOC_SUBDEV_G_CROP _IOWR('V', 59, struct v4l2_subdev_crop) +#define VIDIOC_SUBDEV_S_CROP _IOWR('V', 60, struct v4l2_subdev_crop) +#define VIDIOC_SUBDEV_G_SELECTION _IOWR('V', 61, struct v4l2_subdev_selection) +#define VIDIOC_SUBDEV_S_SELECTION _IOWR('V', 62, struct v4l2_subdev_selection) +/* The following ioctls are identical to the ioctls in videodev2.h */ +#define VIDIOC_SUBDEV_G_EDID _IOWR('V', 40, struct v4l2_edid) +#define VIDIOC_SUBDEV_S_EDID _IOWR('V', 41, struct v4l2_edid) +#define VIDIOC_SUBDEV_S_DV_TIMINGS _IOWR('V', 87, struct v4l2_dv_timings) +#define VIDIOC_SUBDEV_G_DV_TIMINGS _IOWR('V', 88, struct v4l2_dv_timings) +#define VIDIOC_SUBDEV_ENUM_DV_TIMINGS _IOWR('V', 98, struct v4l2_enum_dv_timings) +#define VIDIOC_SUBDEV_QUERY_DV_TIMINGS _IOR('V', 99, struct v4l2_dv_timings) +#define VIDIOC_SUBDEV_DV_TIMINGS_CAP _IOWR('V', 100, struct v4l2_dv_timings_cap) #endif diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h index 4758d1bfcf4..cb9023d4f06 100644 --- a/include/uapi/linux/vfio.h +++ b/include/uapi/linux/vfio.h @@ -22,6 +22,13 @@ /* Extensions */ #define VFIO_TYPE1_IOMMU 1 +#define VFIO_SPAPR_TCE_IOMMU 2 +#define VFIO_TYPE1v2_IOMMU 3 +/* + * IOMMU enforces DMA cache coherence (ex. PCIe NoSnoop stripping). This + * capability is subject to change as groups are added or removed. + */ +#define VFIO_DMA_CC_IOMMU 4 /* * The IOCTL interface is designed for extensibility by embedding the @@ -303,6 +310,15 @@ enum { VFIO_PCI_BAR5_REGION_INDEX, VFIO_PCI_ROM_REGION_INDEX, VFIO_PCI_CONFIG_REGION_INDEX, + /* + * Expose VGA regions defined for PCI base class 03, subclass 00. + * This includes I/O port ranges 0x3b0 to 0x3bb and 0x3c0 to 0x3df + * as well as the MMIO range 0xa0000 to 0xbffff. Each implemented + * range is found at it's identity mapped offset from the region + * offset, for example 0x3b0 is region_info.offset + 0x3b0. Areas + * between described ranges are unimplemented. + */ + VFIO_PCI_VGA_REGION_INDEX, VFIO_PCI_NUM_REGIONS }; @@ -310,9 +326,48 @@ enum { VFIO_PCI_INTX_IRQ_INDEX, VFIO_PCI_MSI_IRQ_INDEX, VFIO_PCI_MSIX_IRQ_INDEX, + VFIO_PCI_ERR_IRQ_INDEX, VFIO_PCI_NUM_IRQS }; +/** + * VFIO_DEVICE_GET_PCI_HOT_RESET_INFO - _IORW(VFIO_TYPE, VFIO_BASE + 12, + * struct vfio_pci_hot_reset_info) + * + * Return: 0 on success, -errno on failure: + * -enospc = insufficient buffer, -enodev = unsupported for device. + */ +struct vfio_pci_dependent_device { + __u32 group_id; + __u16 segment; + __u8 bus; + __u8 devfn; /* Use PCI_SLOT/PCI_FUNC */ +}; + +struct vfio_pci_hot_reset_info { + __u32 argsz; + __u32 flags; + __u32 count; + struct vfio_pci_dependent_device devices[]; +}; + +#define VFIO_DEVICE_GET_PCI_HOT_RESET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12) + +/** + * VFIO_DEVICE_PCI_HOT_RESET - _IOW(VFIO_TYPE, VFIO_BASE + 13, + * struct vfio_pci_hot_reset) + * + * Return: 0 on success, -errno on failure. + */ +struct vfio_pci_hot_reset { + __u32 argsz; + __u32 flags; + __u32 count; + __s32 group_fds[]; +}; + +#define VFIO_DEVICE_PCI_HOT_RESET _IO(VFIO_TYPE, VFIO_BASE + 13) + /* -------- API for Type1 VFIO IOMMU -------- */ /** @@ -351,10 +406,14 @@ struct vfio_iommu_type1_dma_map { #define VFIO_IOMMU_MAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 13) /** - * VFIO_IOMMU_UNMAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 14, struct vfio_dma_unmap) + * VFIO_IOMMU_UNMAP_DMA - _IOWR(VFIO_TYPE, VFIO_BASE + 14, + * struct vfio_dma_unmap) * * Unmap IO virtual addresses using the provided struct vfio_dma_unmap. - * Caller sets argsz. + * Caller sets argsz. The actual unmapped size is returned in the size + * field. No guarantee is made to the user that arbitrary unmaps of iova + * or size different from those used in the original mapping call will + * succeed. */ struct vfio_iommu_type1_dma_unmap { __u32 argsz; @@ -365,4 +424,37 @@ struct vfio_iommu_type1_dma_unmap { #define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14) +/* + * IOCTLs to enable/disable IOMMU container usage. + * No parameters are supported. + */ +#define VFIO_IOMMU_ENABLE _IO(VFIO_TYPE, VFIO_BASE + 15) +#define VFIO_IOMMU_DISABLE _IO(VFIO_TYPE, VFIO_BASE + 16) + +/* -------- Additional API for SPAPR TCE (Server POWERPC) IOMMU -------- */ + +/* + * The SPAPR TCE info struct provides the information about the PCI bus + * address ranges available for DMA, these values are programmed into + * the hardware so the guest has to know that information. + * + * The DMA 32 bit window start is an absolute PCI bus address. + * The IOVA address passed via map/unmap ioctls are absolute PCI bus + * addresses too so the window works as a filter rather than an offset + * for IOVA addresses. + * + * A flag will need to be added if other page sizes are supported, + * so as defined here, it is always 4k. + */ +struct vfio_iommu_spapr_tce_info { + __u32 argsz; + __u32 flags; /* reserved for future use */ + __u32 dma32_window_start; /* 32 bit window start (bytes) */ + __u32 dma32_window_size; /* 32 bit window size (bytes) */ +}; + +#define VFIO_IOMMU_SPAPR_TCE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12) + +/* ***************************************************************** */ + #endif /* _UAPIVFIO_H */ diff --git a/include/uapi/linux/vhost.h b/include/uapi/linux/vhost.h index e847f1e3075..bb6a5b4cb3c 100644 --- a/include/uapi/linux/vhost.h +++ b/include/uapi/linux/vhost.h @@ -127,4 +127,32 @@ struct vhost_memory { /* vhost-net should add virtio_net_hdr for RX, and strip for TX packets. */ #define VHOST_NET_F_VIRTIO_NET_HDR 27 +/* VHOST_SCSI specific definitions */ + +/* + * Used by QEMU userspace to ensure a consistent vhost-scsi ABI. + * + * ABI Rev 0: July 2012 version starting point for v3.6-rc merge candidate + + * RFC-v2 vhost-scsi userspace. Add GET_ABI_VERSION ioctl usage + * ABI Rev 1: January 2013. Ignore vhost_tpgt filed in struct vhost_scsi_target. + * All the targets under vhost_wwpn can be seen and used by guset. + */ + +#define VHOST_SCSI_ABI_VERSION 1 + +struct vhost_scsi_target { + int abi_version; + char vhost_wwpn[224]; /* TRANSPORT_IQN_LEN */ + unsigned short vhost_tpgt; + unsigned short reserved; +}; + +#define VHOST_SCSI_SET_ENDPOINT _IOW(VHOST_VIRTIO, 0x40, struct vhost_scsi_target) +#define VHOST_SCSI_CLEAR_ENDPOINT _IOW(VHOST_VIRTIO, 0x41, struct vhost_scsi_target) +/* Changing this breaks userspace. */ +#define VHOST_SCSI_GET_ABI_VERSION _IOW(VHOST_VIRTIO, 0x42, int) +/* Set and get the events missed flag */ +#define VHOST_SCSI_SET_EVENTS_MISSED _IOW(VHOST_VIRTIO, 0x43, __u32) +#define VHOST_SCSI_GET_EVENTS_MISSED _IOW(VHOST_VIRTIO, 0x44, __u32) + #endif diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index 3cf3e946e33..168ff507bf7 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -72,27 +72,6 @@ #define VIDEO_MAX_FRAME 32 #define VIDEO_MAX_PLANES 8 -#ifndef __KERNEL__ - -/* These defines are V4L1 specific and should not be used with the V4L2 API! - They will be removed from this header in the future. */ - -#define VID_TYPE_CAPTURE 1 /* Can capture */ -#define VID_TYPE_TUNER 2 /* Can tune */ -#define VID_TYPE_TELETEXT 4 /* Does teletext */ -#define VID_TYPE_OVERLAY 8 /* Overlay onto frame buffer */ -#define VID_TYPE_CHROMAKEY 16 /* Overlay by chromakey */ -#define VID_TYPE_CLIPPING 32 /* Can clip */ -#define VID_TYPE_FRAMERAM 64 /* Uses the frame buffer memory */ -#define VID_TYPE_SCALES 128 /* Scalable */ -#define VID_TYPE_MONOCHROME 256 /* Monochrome only */ -#define VID_TYPE_SUBCAPTURE 512 /* Can capture subareas of the image */ -#define VID_TYPE_MPEG_DECODER 1024 /* Can decode MPEG streams */ -#define VID_TYPE_MPEG_ENCODER 2048 /* Can encode MPEG streams */ -#define VID_TYPE_MJPEG_DECODER 4096 /* Can decode MJPEG streams */ -#define VID_TYPE_MJPEG_ENCODER 8192 /* Can encode MJPEG streams */ -#endif - /* * M I S C E L L A N E O U S */ @@ -160,6 +139,7 @@ enum v4l2_buf_type { #endif V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE = 9, V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE = 10, + V4L2_BUF_TYPE_SDR_CAPTURE = 11, /* Deprecated, do not use */ V4L2_BUF_TYPE_PRIVATE = 0x80, }; @@ -180,6 +160,8 @@ enum v4l2_tuner_type { V4L2_TUNER_RADIO = 1, V4L2_TUNER_ANALOG_TV = 2, V4L2_TUNER_DIGITAL_TV = 3, + V4L2_TUNER_ADC = 4, + V4L2_TUNER_RF = 5, }; enum v4l2_memory { @@ -228,8 +210,8 @@ enum v4l2_priority { struct v4l2_rect { __s32 left; __s32 top; - __s32 width; - __s32 height; + __u32 width; + __u32 height; }; struct v4l2_fract { @@ -285,6 +267,8 @@ struct v4l2_capability { #define V4L2_CAP_RADIO 0x00040000 /* is a radio device */ #define V4L2_CAP_MODULATOR 0x00080000 /* has a modulator */ +#define V4L2_CAP_SDR_CAPTURE 0x00100000 /* Is a SDR capture device */ + #define V4L2_CAP_READWRITE 0x01000000 /* read/write systemcalls */ #define V4L2_CAP_ASYNCIO 0x02000000 /* async I/O */ #define V4L2_CAP_STREAMING 0x04000000 /* streaming I/O ioctls */ @@ -334,6 +318,9 @@ struct v4l2_pix_format { /* Palette formats */ #define V4L2_PIX_FMT_PAL8 v4l2_fourcc('P', 'A', 'L', '8') /* 8 8-bit palette */ +/* Chrominance formats */ +#define V4L2_PIX_FMT_UV8 v4l2_fourcc('U', 'V', '8', ' ') /* 8 UV 4:4 */ + /* Luminance+Chrominance formats */ #define V4L2_PIX_FMT_YVU410 v4l2_fourcc('Y', 'V', 'U', '9') /* 9 YVU 4:1:0 */ #define V4L2_PIX_FMT_YVU420 v4l2_fourcc('Y', 'V', '1', '2') /* 12 YVU 4:2:0 */ @@ -366,6 +353,8 @@ struct v4l2_pix_format { /* two non contiguous planes - one Y, one Cr + Cb interleaved */ #define V4L2_PIX_FMT_NV12M v4l2_fourcc('N', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 */ #define V4L2_PIX_FMT_NV21M v4l2_fourcc('N', 'M', '2', '1') /* 21 Y/CrCb 4:2:0 */ +#define V4L2_PIX_FMT_NV16M v4l2_fourcc('N', 'M', '1', '6') /* 16 Y/CbCr 4:2:2 */ +#define V4L2_PIX_FMT_NV61M v4l2_fourcc('N', 'M', '6', '1') /* 16 Y/CrCb 4:2:2 */ #define V4L2_PIX_FMT_NV12MT v4l2_fourcc('T', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 64x32 macroblocks */ #define V4L2_PIX_FMT_NV12MT_16X16 v4l2_fourcc('V', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 16x16 macroblocks */ @@ -386,6 +375,11 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_SGBRG12 v4l2_fourcc('G', 'B', '1', '2') /* 12 GBGB.. RGRG.. */ #define V4L2_PIX_FMT_SGRBG12 v4l2_fourcc('B', 'A', '1', '2') /* 12 GRGR.. BGBG.. */ #define V4L2_PIX_FMT_SRGGB12 v4l2_fourcc('R', 'G', '1', '2') /* 12 RGRG.. GBGB.. */ + /* 10bit raw bayer a-law compressed to 8 bits */ +#define V4L2_PIX_FMT_SBGGR10ALAW8 v4l2_fourcc('a', 'B', 'A', '8') +#define V4L2_PIX_FMT_SGBRG10ALAW8 v4l2_fourcc('a', 'G', 'A', '8') +#define V4L2_PIX_FMT_SGRBG10ALAW8 v4l2_fourcc('a', 'g', 'A', '8') +#define V4L2_PIX_FMT_SRGGB10ALAW8 v4l2_fourcc('a', 'R', 'A', '8') /* 10bit raw bayer DPCM compressed to 8 bits */ #define V4L2_PIX_FMT_SBGGR10DPCM8 v4l2_fourcc('b', 'B', 'A', '8') #define V4L2_PIX_FMT_SGBRG10DPCM8 v4l2_fourcc('b', 'G', 'A', '8') @@ -408,7 +402,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_H263 v4l2_fourcc('H', '2', '6', '3') /* H263 */ #define V4L2_PIX_FMT_MPEG1 v4l2_fourcc('M', 'P', 'G', '1') /* MPEG-1 ES */ #define V4L2_PIX_FMT_MPEG2 v4l2_fourcc('M', 'P', 'G', '2') /* MPEG-2 ES */ -#define V4L2_PIX_FMT_MPEG4 v4l2_fourcc('M', 'P', 'G', '4') /* MPEG-4 ES */ +#define V4L2_PIX_FMT_MPEG4 v4l2_fourcc('M', 'P', 'G', '4') /* MPEG-4 part 2 ES */ #define V4L2_PIX_FMT_XVID v4l2_fourcc('X', 'V', 'I', 'D') /* Xvid */ #define V4L2_PIX_FMT_VC1_ANNEX_G v4l2_fourcc('V', 'C', '1', 'G') /* SMPTE 421M Annex G compliant stream */ #define V4L2_PIX_FMT_VC1_ANNEX_L v4l2_fourcc('V', 'C', '1', 'L') /* SMPTE 421M Annex L compliant stream */ @@ -442,6 +436,10 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_SE401 v4l2_fourcc('S', '4', '0', '1') /* se401 janggu compressed rgb */ #define V4L2_PIX_FMT_S5C_UYVY_JPG v4l2_fourcc('S', '5', 'C', 'I') /* S5C73M3 interleaved UYVY/JPEG */ +/* SDR formats - used only for Software Defined Radio devices */ +#define V4L2_SDR_FMT_CU8 v4l2_fourcc('C', 'U', '0', '8') /* IQ u8 */ +#define V4L2_SDR_FMT_CU16LE v4l2_fourcc('C', 'U', '1', '6') /* IQ u16le */ + /* * F O R M A T E N U M E R A T I O N */ @@ -568,7 +566,7 @@ struct v4l2_jpegcompression { __u32 jpeg_markers; /* Which markers should go into the JPEG * output. Unless you exactly know what * you do, leave them untouched. - * Inluding less markers will make the + * Including less markers will make the * resulting code smaller, but there will * be fewer applications which can read it. * The presence of the APP and COM marker @@ -580,7 +578,7 @@ struct v4l2_jpegcompression { #define V4L2_JPEG_MARKER_DRI (1<<5) /* Define Restart Interval */ #define V4L2_JPEG_MARKER_COM (1<<6) /* Comment segment */ #define V4L2_JPEG_MARKER_APP (1<<7) /* App segment, driver will - * allways use APP0 */ + * always use APP0 */ }; /* @@ -651,7 +649,6 @@ struct v4l2_plane { * @length: size in bytes of the buffer (NOT its payload) for single-plane * buffers (when type != *_MPLANE); number of elements in the * planes array for multi-plane buffers - * @input: input number from which the video data has has been captured * * Contains data exchanged by application and driver using one of the Streaming * I/O methods. @@ -680,19 +677,36 @@ struct v4l2_buffer { }; /* Flags for 'flags' field */ -#define V4L2_BUF_FLAG_MAPPED 0x0001 /* Buffer is mapped (flag) */ -#define V4L2_BUF_FLAG_QUEUED 0x0002 /* Buffer is queued for processing */ -#define V4L2_BUF_FLAG_DONE 0x0004 /* Buffer is ready */ -#define V4L2_BUF_FLAG_KEYFRAME 0x0008 /* Image is a keyframe (I-frame) */ -#define V4L2_BUF_FLAG_PFRAME 0x0010 /* Image is a P-frame */ -#define V4L2_BUF_FLAG_BFRAME 0x0020 /* Image is a B-frame */ +/* Buffer is mapped (flag) */ +#define V4L2_BUF_FLAG_MAPPED 0x00000001 +/* Buffer is queued for processing */ +#define V4L2_BUF_FLAG_QUEUED 0x00000002 +/* Buffer is ready */ +#define V4L2_BUF_FLAG_DONE 0x00000004 +/* Image is a keyframe (I-frame) */ +#define V4L2_BUF_FLAG_KEYFRAME 0x00000008 +/* Image is a P-frame */ +#define V4L2_BUF_FLAG_PFRAME 0x00000010 +/* Image is a B-frame */ +#define V4L2_BUF_FLAG_BFRAME 0x00000020 /* Buffer is ready, but the data contained within is corrupted. */ -#define V4L2_BUF_FLAG_ERROR 0x0040 -#define V4L2_BUF_FLAG_TIMECODE 0x0100 /* timecode field is valid */ -#define V4L2_BUF_FLAG_PREPARED 0x0400 /* Buffer is prepared for queuing */ +#define V4L2_BUF_FLAG_ERROR 0x00000040 +/* timecode field is valid */ +#define V4L2_BUF_FLAG_TIMECODE 0x00000100 +/* Buffer is prepared for queuing */ +#define V4L2_BUF_FLAG_PREPARED 0x00000400 /* Cache handling flags */ -#define V4L2_BUF_FLAG_NO_CACHE_INVALIDATE 0x0800 -#define V4L2_BUF_FLAG_NO_CACHE_CLEAN 0x1000 +#define V4L2_BUF_FLAG_NO_CACHE_INVALIDATE 0x00000800 +#define V4L2_BUF_FLAG_NO_CACHE_CLEAN 0x00001000 +/* Timestamp type */ +#define V4L2_BUF_FLAG_TIMESTAMP_MASK 0x0000e000 +#define V4L2_BUF_FLAG_TIMESTAMP_UNKNOWN 0x00000000 +#define V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC 0x00002000 +#define V4L2_BUF_FLAG_TIMESTAMP_COPY 0x00004000 +/* Timestamp sources. */ +#define V4L2_BUF_FLAG_TSTAMP_SRC_MASK 0x00070000 +#define V4L2_BUF_FLAG_TSTAMP_SRC_EOF 0x00000000 +#define V4L2_BUF_FLAG_TSTAMP_SRC_SOE 0x00010000 /** * struct v4l2_exportbuffer - export of video buffer as DMABUF file descriptor @@ -908,7 +922,7 @@ typedef __u64 v4l2_std_id; /* * "Common" PAL - This macro is there to be compatible with the old * V4L1 concept of "PAL": /BGDKHI. - * Several PAL standards are mising here: /M, /N and /Nc + * Several PAL standards are missing here: /M, /N and /Nc */ #define V4L2_STD_PAL (V4L2_STD_PAL_BG |\ V4L2_STD_PAL_DK |\ @@ -968,52 +982,6 @@ struct v4l2_standard { __u32 reserved[4]; }; -/* The DV Preset API is deprecated in favor of the DV Timings API. - New drivers shouldn't use this anymore! */ - -/* - * V I D E O T I M I N G S D V P R E S E T - */ -struct v4l2_dv_preset { - __u32 preset; - __u32 reserved[4]; -}; - -/* - * D V P R E S E T S E N U M E R A T I O N - */ -struct v4l2_dv_enum_preset { - __u32 index; - __u32 preset; - __u8 name[32]; /* Name of the preset timing */ - __u32 width; - __u32 height; - __u32 reserved[4]; -}; - -/* - * D V P R E S E T V A L U E S - */ -#define V4L2_DV_INVALID 0 -#define V4L2_DV_480P59_94 1 /* BT.1362 */ -#define V4L2_DV_576P50 2 /* BT.1362 */ -#define V4L2_DV_720P24 3 /* SMPTE 296M */ -#define V4L2_DV_720P25 4 /* SMPTE 296M */ -#define V4L2_DV_720P30 5 /* SMPTE 296M */ -#define V4L2_DV_720P50 6 /* SMPTE 296M */ -#define V4L2_DV_720P59_94 7 /* SMPTE 274M */ -#define V4L2_DV_720P60 8 /* SMPTE 274M/296M */ -#define V4L2_DV_1080I29_97 9 /* BT.1120/ SMPTE 274M */ -#define V4L2_DV_1080I30 10 /* BT.1120/ SMPTE 274M */ -#define V4L2_DV_1080I25 11 /* BT.1120 */ -#define V4L2_DV_1080I50 12 /* SMPTE 296M */ -#define V4L2_DV_1080I60 13 /* SMPTE 296M */ -#define V4L2_DV_1080P24 14 /* SMPTE 296M */ -#define V4L2_DV_1080P25 15 /* SMPTE 296M */ -#define V4L2_DV_1080P30 16 /* SMPTE 296M */ -#define V4L2_DV_1080P50 17 /* BT.1120 */ -#define V4L2_DV_1080P60 18 /* BT.1120 */ - /* * D V B T T I M I N G S */ @@ -1107,8 +1075,18 @@ struct v4l2_bt_timings { longer and field 2 is really one half-line shorter, so each field has exactly the same number of half-lines. Whether half-lines can be detected or used depends on the hardware. */ -#define V4L2_DV_FL_HALF_LINE (1 << 0) - +#define V4L2_DV_FL_HALF_LINE (1 << 3) + +/* A few useful defines to calculate the total blanking and frame sizes */ +#define V4L2_DV_BT_BLANKING_WIDTH(bt) \ + ((bt)->hfrontporch + (bt)->hsync + (bt)->hbackporch) +#define V4L2_DV_BT_FRAME_WIDTH(bt) \ + ((bt)->width + V4L2_DV_BT_BLANKING_WIDTH(bt)) +#define V4L2_DV_BT_BLANKING_HEIGHT(bt) \ + ((bt)->vfrontporch + (bt)->vsync + (bt)->vbackporch + \ + (bt)->il_vfrontporch + (bt)->il_vsync + (bt)->il_vbackporch) +#define V4L2_DV_BT_FRAME_HEIGHT(bt) \ + ((bt)->height + V4L2_DV_BT_BLANKING_HEIGHT(bt)) /** struct v4l2_dv_timings - DV timings * @type: the type of the timings @@ -1128,12 +1106,15 @@ struct v4l2_dv_timings { /** struct v4l2_enum_dv_timings - DV timings enumeration * @index: enumeration index + * @pad: the pad number for which to enumerate timings (used with + * v4l-subdev nodes only) * @reserved: must be zeroed * @timings: the timings for the given index */ struct v4l2_enum_dv_timings { __u32 index; - __u32 reserved[3]; + __u32 pad; + __u32 reserved[2]; struct v4l2_dv_timings timings; }; @@ -1171,11 +1152,14 @@ struct v4l2_bt_timings_cap { /** struct v4l2_dv_timings_cap - DV timings capabilities * @type: the type of the timings (same as in struct v4l2_dv_timings) + * @pad: the pad number for which to query capabilities (used with + * v4l-subdev nodes only) * @bt: the BT656/1120 timings capabilities */ struct v4l2_dv_timings_cap { __u32 type; - __u32 reserved[3]; + __u32 pad; + __u32 reserved[2]; union { struct v4l2_bt_timings_cap bt; __u32 raw_data[32]; @@ -1227,7 +1211,6 @@ struct v4l2_input { #define V4L2_IN_ST_VTR 0x04000000 /* VTR time constant */ /* capabilities flags */ -#define V4L2_IN_CAP_PRESETS 0x00000001 /* Supports S_DV_PRESET */ #define V4L2_IN_CAP_DV_TIMINGS 0x00000002 /* Supports S_DV_TIMINGS */ #define V4L2_IN_CAP_CUSTOM_TIMINGS V4L2_IN_CAP_DV_TIMINGS /* For compatibility */ #define V4L2_IN_CAP_STD 0x00000004 /* Supports S_STD */ @@ -1251,7 +1234,6 @@ struct v4l2_output { #define V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY 3 /* capabilities flags */ -#define V4L2_OUT_CAP_PRESETS 0x00000001 /* Supports S_DV_PRESET */ #define V4L2_OUT_CAP_DV_TIMINGS 0x00000002 /* Supports S_DV_TIMINGS */ #define V4L2_OUT_CAP_CUSTOM_TIMINGS V4L2_OUT_CAP_DV_TIMINGS /* For compatibility */ #define V4L2_OUT_CAP_STD 0x00000004 /* Supports S_STD */ @@ -1342,28 +1324,6 @@ struct v4l2_querymenu { #define V4L2_CID_PRIVATE_BASE 0x08000000 -/* DV-class control IDs defined by V4L2 */ -#define V4L2_CID_DV_CLASS_BASE (V4L2_CTRL_CLASS_DV | 0x900) -#define V4L2_CID_DV_CLASS (V4L2_CTRL_CLASS_DV | 1) - -#define V4L2_CID_DV_TX_HOTPLUG (V4L2_CID_DV_CLASS_BASE + 1) -#define V4L2_CID_DV_TX_RXSENSE (V4L2_CID_DV_CLASS_BASE + 2) -#define V4L2_CID_DV_TX_EDID_PRESENT (V4L2_CID_DV_CLASS_BASE + 3) -#define V4L2_CID_DV_TX_MODE (V4L2_CID_DV_CLASS_BASE + 4) -enum v4l2_dv_tx_mode { - V4L2_DV_TX_MODE_DVI_D = 0, - V4L2_DV_TX_MODE_HDMI = 1, -}; -#define V4L2_CID_DV_TX_RGB_RANGE (V4L2_CID_DV_CLASS_BASE + 5) -enum v4l2_dv_rgb_range { - V4L2_DV_RGB_RANGE_AUTO = 0, - V4L2_DV_RGB_RANGE_LIMITED = 1, - V4L2_DV_RGB_RANGE_FULL = 2, -}; - -#define V4L2_CID_DV_RX_POWER_PRESENT (V4L2_CID_DV_CLASS_BASE + 100) -#define V4L2_CID_DV_RX_RGB_RANGE (V4L2_CID_DV_CLASS_BASE + 101) - /* * T U N I N G */ @@ -1405,6 +1365,7 @@ struct v4l2_modulator { #define V4L2_TUNER_CAP_RDS_CONTROLS 0x0200 #define V4L2_TUNER_CAP_FREQ_BANDS 0x0400 #define V4L2_TUNER_CAP_HWSEEK_PROG_LIM 0x0800 +#define V4L2_TUNER_CAP_1HZ 0x1000 /* Flags for the 'rxsubchans' field */ #define V4L2_TUNER_SUB_MONO 0x0001 @@ -1758,6 +1719,15 @@ struct v4l2_pix_format_mplane { } __attribute__ ((packed)); /** + * struct v4l2_sdr_format - SDR format definition + * @pixelformat: little endian four character code (fourcc) + */ +struct v4l2_sdr_format { + __u32 pixelformat; + __u8 reserved[28]; +} __attribute__ ((packed)); + +/** * struct v4l2_format - stream data format * @type: enum v4l2_buf_type; type of the data stream * @pix: definition of an image format @@ -1775,6 +1745,7 @@ struct v4l2_format { struct v4l2_window win; /* V4L2_BUF_TYPE_VIDEO_OVERLAY */ struct v4l2_vbi_format vbi; /* V4L2_BUF_TYPE_VBI_CAPTURE */ struct v4l2_sliced_vbi_format sliced; /* V4L2_BUF_TYPE_SLICED_VBI_CAPTURE */ + struct v4l2_sdr_format sdr; /* V4L2_BUF_TYPE_SDR_CAPTURE */ __u8 raw_data[200]; /* user-defined */ } fmt; }; @@ -1799,6 +1770,7 @@ struct v4l2_streamparm { #define V4L2_EVENT_EOS 2 #define V4L2_EVENT_CTRL 3 #define V4L2_EVENT_FRAME_SYNC 4 +#define V4L2_EVENT_SOURCE_CHANGE 5 #define V4L2_EVENT_PRIVATE_START 0x08000000 /* Payload for V4L2_EVENT_VSYNC */ @@ -1810,6 +1782,7 @@ struct v4l2_event_vsync { /* Payload for V4L2_EVENT_CTRL */ #define V4L2_EVENT_CTRL_CH_VALUE (1 << 0) #define V4L2_EVENT_CTRL_CH_FLAGS (1 << 1) +#define V4L2_EVENT_CTRL_CH_RANGE (1 << 2) struct v4l2_event_ctrl { __u32 changes; @@ -1829,12 +1802,19 @@ struct v4l2_event_frame_sync { __u32 frame_sequence; }; +#define V4L2_EVENT_SRC_CH_RESOLUTION (1 << 0) + +struct v4l2_event_src_change { + __u32 changes; +}; + struct v4l2_event { __u32 type; union { struct v4l2_event_vsync vsync; struct v4l2_event_ctrl ctrl; struct v4l2_event_frame_sync frame_sync; + struct v4l2_event_src_change src_change; __u8 data[64]; } u; __u32 pending; @@ -1863,10 +1843,14 @@ struct v4l2_event_subscription { /* VIDIOC_DBG_G_REGISTER and VIDIOC_DBG_S_REGISTER */ -#define V4L2_CHIP_MATCH_HOST 0 /* Match against chip ID on host (0 for the host) */ -#define V4L2_CHIP_MATCH_I2C_DRIVER 1 /* Match against I2C driver name */ -#define V4L2_CHIP_MATCH_I2C_ADDR 2 /* Match against I2C 7-bit address */ -#define V4L2_CHIP_MATCH_AC97 3 /* Match against anciliary AC97 chip */ +#define V4L2_CHIP_MATCH_BRIDGE 0 /* Match against chip ID on the bridge (0 for the bridge) */ +#define V4L2_CHIP_MATCH_SUBDEV 4 /* Match against subdev index */ + +/* The following four defines are no longer in use */ +#define V4L2_CHIP_MATCH_HOST V4L2_CHIP_MATCH_BRIDGE +#define V4L2_CHIP_MATCH_I2C_DRIVER 1 /* Match against I2C driver name */ +#define V4L2_CHIP_MATCH_I2C_ADDR 2 /* Match against I2C 7-bit address */ +#define V4L2_CHIP_MATCH_AC97 3 /* Match against ancillary AC97 chip */ struct v4l2_dbg_match { __u32 type; /* Match type */ @@ -1883,11 +1867,15 @@ struct v4l2_dbg_register { __u64 val; } __attribute__ ((packed)); -/* VIDIOC_DBG_G_CHIP_IDENT */ -struct v4l2_dbg_chip_ident { +#define V4L2_CHIP_FL_READABLE (1 << 0) +#define V4L2_CHIP_FL_WRITABLE (1 << 1) + +/* VIDIOC_DBG_G_CHIP_INFO */ +struct v4l2_dbg_chip_info { struct v4l2_dbg_match match; - __u32 ident; /* chip identifier as specified in <media/v4l2-chip-ident.h> */ - __u32 revision; /* chip revision, chip specific */ + char name[32]; + __u32 flags; + __u32 reserved[32]; } __attribute__ ((packed)); /** @@ -1942,6 +1930,8 @@ struct v4l2_create_buffers { #define VIDIOC_QUERYMENU _IOWR('V', 37, struct v4l2_querymenu) #define VIDIOC_G_INPUT _IOR('V', 38, int) #define VIDIOC_S_INPUT _IOWR('V', 39, int) +#define VIDIOC_G_EDID _IOWR('V', 40, struct v4l2_edid) +#define VIDIOC_S_EDID _IOWR('V', 41, struct v4l2_edid) #define VIDIOC_G_OUTPUT _IOR('V', 46, int) #define VIDIOC_S_OUTPUT _IOWR('V', 47, int) #define VIDIOC_ENUMOUTPUT _IOWR('V', 48, struct v4l2_output) @@ -1967,34 +1957,20 @@ struct v4l2_create_buffers { #define VIDIOC_G_EXT_CTRLS _IOWR('V', 71, struct v4l2_ext_controls) #define VIDIOC_S_EXT_CTRLS _IOWR('V', 72, struct v4l2_ext_controls) #define VIDIOC_TRY_EXT_CTRLS _IOWR('V', 73, struct v4l2_ext_controls) -#if 1 #define VIDIOC_ENUM_FRAMESIZES _IOWR('V', 74, struct v4l2_frmsizeenum) #define VIDIOC_ENUM_FRAMEINTERVALS _IOWR('V', 75, struct v4l2_frmivalenum) #define VIDIOC_G_ENC_INDEX _IOR('V', 76, struct v4l2_enc_idx) #define VIDIOC_ENCODER_CMD _IOWR('V', 77, struct v4l2_encoder_cmd) #define VIDIOC_TRY_ENCODER_CMD _IOWR('V', 78, struct v4l2_encoder_cmd) -#endif -#if 1 /* Experimental, meant for debugging, testing and internal use. Only implemented if CONFIG_VIDEO_ADV_DEBUG is defined. You must be root to use these ioctls. Never use these in applications! */ #define VIDIOC_DBG_S_REGISTER _IOW('V', 79, struct v4l2_dbg_register) #define VIDIOC_DBG_G_REGISTER _IOWR('V', 80, struct v4l2_dbg_register) -/* Experimental, meant for debugging, testing and internal use. - Never use this ioctl in applications! */ -#define VIDIOC_DBG_G_CHIP_IDENT _IOWR('V', 81, struct v4l2_dbg_chip_ident) -#endif - #define VIDIOC_S_HW_FREQ_SEEK _IOW('V', 82, struct v4l2_hw_freq_seek) -/* These four DV Preset ioctls are deprecated in favor of the DV Timings - ioctls. */ -#define VIDIOC_ENUM_DV_PRESETS _IOWR('V', 83, struct v4l2_dv_enum_preset) -#define VIDIOC_S_DV_PRESET _IOWR('V', 84, struct v4l2_dv_preset) -#define VIDIOC_G_DV_PRESET _IOWR('V', 85, struct v4l2_dv_preset) -#define VIDIOC_QUERY_DV_PRESET _IOR('V', 86, struct v4l2_dv_preset) #define VIDIOC_S_DV_TIMINGS _IOWR('V', 87, struct v4l2_dv_timings) #define VIDIOC_G_DV_TIMINGS _IOWR('V', 88, struct v4l2_dv_timings) #define VIDIOC_DQEVENT _IOR('V', 89, struct v4l2_event) @@ -2025,6 +2001,10 @@ struct v4l2_create_buffers { versions. */ #define VIDIOC_ENUM_FREQ_BANDS _IOWR('V', 101, struct v4l2_frequency_band) +/* Experimental, meant for debugging, testing and internal use. + Never use these in applications! */ +#define VIDIOC_DBG_G_CHIP_INFO _IOWR('V', 102, struct v4l2_dbg_chip_info) + /* Reminder: when adding new ioctls please add support for them to drivers/media/video/v4l2-compat-ioctl32.c as well! */ diff --git a/include/uapi/linux/virtio_balloon.h b/include/uapi/linux/virtio_balloon.h index 652dc8bea92..5e26f61b5df 100644 --- a/include/uapi/linux/virtio_balloon.h +++ b/include/uapi/linux/virtio_balloon.h @@ -52,8 +52,8 @@ struct virtio_balloon_config #define VIRTIO_BALLOON_S_NR 6 struct virtio_balloon_stat { - u16 tag; - u64 val; + __u16 tag; + __u64 val; } __attribute__((packed)); #endif /* _LINUX_VIRTIO_BALLOON_H */ diff --git a/include/uapi/linux/virtio_config.h b/include/uapi/linux/virtio_config.h index b7cda390fd0..3ce768c6910 100644 --- a/include/uapi/linux/virtio_config.h +++ b/include/uapi/linux/virtio_config.h @@ -51,4 +51,7 @@ * suppressed them? */ #define VIRTIO_F_NOTIFY_ON_EMPTY 24 +/* Can the device handle any descriptor layout? */ +#define VIRTIO_F_ANY_LAYOUT 27 + #endif /* _UAPI_LINUX_VIRTIO_CONFIG_H */ diff --git a/include/uapi/linux/virtio_console.h b/include/uapi/linux/virtio_console.h index ee13ab6c361..ba260dd0b33 100644 --- a/include/uapi/linux/virtio_console.h +++ b/include/uapi/linux/virtio_console.h @@ -38,8 +38,9 @@ /* Feature bits */ #define VIRTIO_CONSOLE_F_SIZE 0 /* Does host provide console size? */ #define VIRTIO_CONSOLE_F_MULTIPORT 1 /* Does host provide multiple ports? */ +#define VIRTIO_CONSOLE_F_EMERG_WRITE 2 /* Does host support emergency write? */ -#define VIRTIO_CONSOLE_BAD_ID (~(u32)0) +#define VIRTIO_CONSOLE_BAD_ID (~(__u32)0) struct virtio_console_config { /* colums of the screens */ @@ -48,6 +49,8 @@ struct virtio_console_config { __u16 rows; /* max. number of ports this device can hold */ __u32 max_nr_ports; + /* emergency write register */ + __u32 emerg_wr; } __attribute__((packed)); /* diff --git a/include/uapi/linux/virtio_ids.h b/include/uapi/linux/virtio_ids.h index a7630d04029..284fc3a05f7 100644 --- a/include/uapi/linux/virtio_ids.h +++ b/include/uapi/linux/virtio_ids.h @@ -38,5 +38,6 @@ #define VIRTIO_ID_SCSI 8 /* virtio scsi */ #define VIRTIO_ID_9P 9 /* 9p virtio console */ #define VIRTIO_ID_RPROC_SERIAL 11 /* virtio remoteproc serial link */ +#define VIRTIO_ID_CAIF 12 /* Virtio caif */ #endif /* _LINUX_VIRTIO_IDS_H */ diff --git a/include/uapi/linux/virtio_net.h b/include/uapi/linux/virtio_net.h index 848e3584d7c..172a7f00780 100644 --- a/include/uapi/linux/virtio_net.h +++ b/include/uapi/linux/virtio_net.h @@ -53,13 +53,14 @@ * network */ #define VIRTIO_NET_F_MQ 22 /* Device supports Receive Flow * Steering */ +#define VIRTIO_NET_F_CTRL_MAC_ADDR 23 /* Set MAC address */ #define VIRTIO_NET_S_LINK_UP 1 /* Link is up */ #define VIRTIO_NET_S_ANNOUNCE 2 /* Announcement is needed */ struct virtio_net_config { /* The config defining mac address (if VIRTIO_NET_F_MAC) */ - __u8 mac[6]; + __u8 mac[ETH_ALEN]; /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */ __u16 status; /* Maximum number of each of transmit and receive queues; @@ -69,7 +70,9 @@ struct virtio_net_config { __u16 max_virtqueue_pairs; } __attribute__((packed)); -/* This is the first element of the scatter-gather list. If you don't +/* This header comes first in the scatter-gather list. + * If VIRTIO_F_ANY_LAYOUT is not negotiated, it must + * be the first element of the scatter-gather list. If you don't * specify GSO or CSUM features, you can simply ignore the header. */ struct virtio_net_hdr { #define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 // Use csum_start, csum_offset @@ -127,7 +130,7 @@ typedef __u8 virtio_net_ctrl_ack; #define VIRTIO_NET_CTRL_RX_NOBCAST 5 /* - * Control the MAC filter table. + * Control the MAC * * The MAC filter table is managed by the hypervisor, the guest should * assume the size is infinite. Filtering should be considered @@ -140,6 +143,10 @@ typedef __u8 virtio_net_ctrl_ack; * first sg list contains unicast addresses, the second is for multicast. * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature * is available. + * + * The ADDR_SET command requests one out scatterlist, it contains a + * 6 bytes MAC address. This functionality is present if the + * VIRTIO_NET_F_CTRL_MAC_ADDR feature is available. */ struct virtio_net_ctrl_mac { __u32 entries; @@ -148,6 +155,7 @@ struct virtio_net_ctrl_mac { #define VIRTIO_NET_CTRL_MAC 1 #define VIRTIO_NET_CTRL_MAC_TABLE_SET 0 + #define VIRTIO_NET_CTRL_MAC_ADDR_SET 1 /* * Control VLAN filtering @@ -185,7 +193,7 @@ struct virtio_net_ctrl_mac { * specified. */ struct virtio_net_ctrl_mq { - u16 virtqueue_pairs; + __u16 virtqueue_pairs; }; #define VIRTIO_NET_CTRL_MQ 4 diff --git a/include/uapi/linux/virtio_pci.h b/include/uapi/linux/virtio_pci.h index ea66f3f60d6..e5ec1caab82 100644 --- a/include/uapi/linux/virtio_pci.h +++ b/include/uapi/linux/virtio_pci.h @@ -80,7 +80,9 @@ /* The remaining space is defined by each driver as the per-driver * configuration space */ -#define VIRTIO_PCI_CONFIG(dev) ((dev)->msix_enabled ? 24 : 20) +#define VIRTIO_PCI_CONFIG_OFF(msix_enabled) ((msix_enabled) ? 24 : 20) +/* Deprecated: please use VIRTIO_PCI_CONFIG_OFF instead */ +#define VIRTIO_PCI_CONFIG(dev) VIRTIO_PCI_CONFIG_OFF((dev)->msix_enabled) /* Virtio ABI version, this must match exactly */ #define VIRTIO_PCI_ABI_VERSION 0 diff --git a/include/uapi/linux/vm_sockets.h b/include/uapi/linux/vm_sockets.h new file mode 100644 index 00000000000..b4ed5d89569 --- /dev/null +++ b/include/uapi/linux/vm_sockets.h @@ -0,0 +1,156 @@ +/* + * VMware vSockets Driver + * + * Copyright (C) 2007-2013 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef _UAPI_VM_SOCKETS_H +#define _UAPI_VM_SOCKETS_H + +#include <linux/socket.h> + +/* Option name for STREAM socket buffer size. Use as the option name in + * setsockopt(3) or getsockopt(3) to set or get an unsigned long long that + * specifies the size of the buffer underlying a vSockets STREAM socket. + * Value is clamped to the MIN and MAX. + */ + +#define SO_VM_SOCKETS_BUFFER_SIZE 0 + +/* Option name for STREAM socket minimum buffer size. Use as the option name + * in setsockopt(3) or getsockopt(3) to set or get an unsigned long long that + * specifies the minimum size allowed for the buffer underlying a vSockets + * STREAM socket. + */ + +#define SO_VM_SOCKETS_BUFFER_MIN_SIZE 1 + +/* Option name for STREAM socket maximum buffer size. Use as the option name + * in setsockopt(3) or getsockopt(3) to set or get an unsigned long long + * that specifies the maximum size allowed for the buffer underlying a + * vSockets STREAM socket. + */ + +#define SO_VM_SOCKETS_BUFFER_MAX_SIZE 2 + +/* Option name for socket peer's host-specific VM ID. Use as the option name + * in getsockopt(3) to get a host-specific identifier for the peer endpoint's + * VM. The identifier is a signed integer. + * Only available for hypervisor endpoints. + */ + +#define SO_VM_SOCKETS_PEER_HOST_VM_ID 3 + +/* Option name for determining if a socket is trusted. Use as the option name + * in getsockopt(3) to determine if a socket is trusted. The value is a + * signed integer. + */ + +#define SO_VM_SOCKETS_TRUSTED 5 + +/* Option name for STREAM socket connection timeout. Use as the option name + * in setsockopt(3) or getsockopt(3) to set or get the connection + * timeout for a STREAM socket. + */ + +#define SO_VM_SOCKETS_CONNECT_TIMEOUT 6 + +/* Option name for using non-blocking send/receive. Use as the option name + * for setsockopt(3) or getsockopt(3) to set or get the non-blocking + * transmit/receive flag for a STREAM socket. This flag determines whether + * send() and recv() can be called in non-blocking contexts for the given + * socket. The value is a signed integer. + * + * This option is only relevant to kernel endpoints, where descheduling the + * thread of execution is not allowed, for example, while holding a spinlock. + * It is not to be confused with conventional non-blocking socket operations. + * + * Only available for hypervisor endpoints. + */ + +#define SO_VM_SOCKETS_NONBLOCK_TXRX 7 + +/* The vSocket equivalent of INADDR_ANY. This works for the svm_cid field of + * sockaddr_vm and indicates the context ID of the current endpoint. + */ + +#define VMADDR_CID_ANY -1U + +/* Bind to any available port. Works for the svm_port field of + * sockaddr_vm. + */ + +#define VMADDR_PORT_ANY -1U + +/* Use this as the destination CID in an address when referring to the + * hypervisor. VMCI relies on it being 0, but this would be useful for other + * transports too. + */ + +#define VMADDR_CID_HYPERVISOR 0 + +/* This CID is specific to VMCI and can be considered reserved (even VMCI + * doesn't use it anymore, it's a legacy value from an older release). + */ + +#define VMADDR_CID_RESERVED 1 + +/* Use this as the destination CID in an address when referring to the host + * (any process other than the hypervisor). VMCI relies on it being 2, but + * this would be useful for other transports too. + */ + +#define VMADDR_CID_HOST 2 + +/* Invalid vSockets version. */ + +#define VM_SOCKETS_INVALID_VERSION -1U + +/* The epoch (first) component of the vSockets version. A single byte + * representing the epoch component of the vSockets version. + */ + +#define VM_SOCKETS_VERSION_EPOCH(_v) (((_v) & 0xFF000000) >> 24) + +/* The major (second) component of the vSockets version. A single byte + * representing the major component of the vSockets version. Typically + * changes for every major release of a product. + */ + +#define VM_SOCKETS_VERSION_MAJOR(_v) (((_v) & 0x00FF0000) >> 16) + +/* The minor (third) component of the vSockets version. Two bytes representing + * the minor component of the vSockets version. + */ + +#define VM_SOCKETS_VERSION_MINOR(_v) (((_v) & 0x0000FFFF)) + +/* Address structure for vSockets. The address family should be set to + * AF_VSOCK. The structure members should all align on their natural + * boundaries without resorting to compiler packing directives. The total size + * of this structure should be exactly the same as that of struct sockaddr. + */ + +struct sockaddr_vm { + __kernel_sa_family_t svm_family; + unsigned short svm_reserved1; + unsigned int svm_port; + unsigned int svm_cid; + unsigned char svm_zero[sizeof(struct sockaddr) - + sizeof(sa_family_t) - + sizeof(unsigned short) - + sizeof(unsigned int) - sizeof(unsigned int)]; +}; + +#define IOCTL_VM_SOCKETS_GET_LOCAL_CID _IO(7, 0xb9) + +#endif /* _UAPI_VM_SOCKETS_H */ diff --git a/include/uapi/linux/vsp1.h b/include/uapi/linux/vsp1.h new file mode 100644 index 00000000000..e18858f6e86 --- /dev/null +++ b/include/uapi/linux/vsp1.h @@ -0,0 +1,34 @@ +/* + * vsp1.h + * + * Renesas R-Car VSP1 - User-space API + * + * Copyright (C) 2013 Renesas Corporation + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __VSP1_USER_H__ +#define __VSP1_USER_H__ + +#include <linux/types.h> +#include <linux/videodev2.h> + +/* + * Private IOCTLs + * + * VIDIOC_VSP1_LUT_CONFIG - Configure the lookup table + */ + +#define VIDIOC_VSP1_LUT_CONFIG \ + _IOWR('V', BASE_VIDIOC_PRIVATE + 1, struct vsp1_lut_config) + +struct vsp1_lut_config { + u32 lut[256]; +}; + +#endif /* __VSP1_USER_H__ */ diff --git a/include/uapi/linux/wanrouter.h b/include/uapi/linux/wanrouter.h index 7617df2833d..498d6c12c66 100644 --- a/include/uapi/linux/wanrouter.h +++ b/include/uapi/linux/wanrouter.h @@ -1,363 +1,9 @@ -/***************************************************************************** -* wanrouter.h Definitions for the WAN Multiprotocol Router Module. -* This module provides API and common services for WAN Link -* Drivers and is completely hardware-independent. -* -* Author: Nenad Corbic <ncorbic@sangoma.com> -* Gideon Hack -* Additions: Arnaldo Melo -* -* Copyright: (c) 1995-2000 Sangoma Technologies Inc. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* Jul 21, 2000 Nenad Corbic Added WAN_FT1_READY State -* Feb 24, 2000 Nenad Corbic Added support for socket based x25api -* Jan 28, 2000 Nenad Corbic Added support for the ASYNC protocol. -* Oct 04, 1999 Nenad Corbic Updated for 2.1.0 release -* Jun 02, 1999 Gideon Hack Added support for the S514 adapter. -* May 23, 1999 Arnaldo Melo Added local_addr to wanif_conf_t -* WAN_DISCONNECTING state added -* Jul 20, 1998 David Fong Added Inverse ARP options to 'wanif_conf_t' -* Jun 12, 1998 David Fong Added Cisco HDLC support. -* Dec 16, 1997 Jaspreet Singh Moved 'enable_IPX' and 'network_number' to -* 'wanif_conf_t' -* Dec 05, 1997 Jaspreet Singh Added 'pap', 'chap' to 'wanif_conf_t' -* Added 'authenticator' to 'wan_ppp_conf_t' -* Nov 06, 1997 Jaspreet Singh Changed Router Driver version to 1.1 from 1.0 -* Oct 20, 1997 Jaspreet Singh Added 'cir','bc','be' and 'mc' to 'wanif_conf_t' -* Added 'enable_IPX' and 'network_number' to -* 'wan_device_t'. Also added defines for -* UDP PACKET TYPE, Interrupt test, critical values -* for RACE conditions. -* Oct 05, 1997 Jaspreet Singh Added 'dlci_num' and 'dlci[100]' to -* 'wan_fr_conf_t' to configure a list of dlci(s) -* for a NODE -* Jul 07, 1997 Jaspreet Singh Added 'ttl' to 'wandev_conf_t' & 'wan_device_t' -* May 29, 1997 Jaspreet Singh Added 'tx_int_enabled' to 'wan_device_t' -* May 21, 1997 Jaspreet Singh Added 'udp_port' to 'wan_device_t' -* Apr 25, 1997 Farhan Thawar Added 'udp_port' to 'wandev_conf_t' -* Jan 16, 1997 Gene Kozin router_devlist made public -* Jan 02, 1997 Gene Kozin Initial version (based on wanpipe.h). -*****************************************************************************/ - -#ifndef _UAPI_ROUTER_H -#define _UAPI_ROUTER_H - -#define ROUTER_NAME "wanrouter" /* in case we ever change it */ -#define ROUTER_VERSION 1 /* version number */ -#define ROUTER_RELEASE 1 /* release (minor version) number */ -#define ROUTER_IOCTL 'W' /* for IOCTL calls */ -#define ROUTER_MAGIC 0x524D4157L /* signature: 'WANR' reversed */ - -/* IOCTL codes for /proc/router/<device> entries (up to 255) */ -enum router_ioctls -{ - ROUTER_SETUP = ROUTER_IOCTL<<8, /* configure device */ - ROUTER_DOWN, /* shut down device */ - ROUTER_STAT, /* get device status */ - ROUTER_IFNEW, /* add interface */ - ROUTER_IFDEL, /* delete interface */ - ROUTER_IFSTAT, /* get interface status */ - ROUTER_USER = (ROUTER_IOCTL<<8)+16, /* driver-specific calls */ - ROUTER_USER_MAX = (ROUTER_IOCTL<<8)+31 -}; - -/* identifiers for displaying proc file data for dual port adapters */ -#define PROC_DATA_PORT_0 0x8000 /* the data is for port 0 */ -#define PROC_DATA_PORT_1 0x8001 /* the data is for port 1 */ - -/* NLPID for packet encapsulation (ISO/IEC TR 9577) */ -#define NLPID_IP 0xCC /* Internet Protocol Datagram */ -#define NLPID_SNAP 0x80 /* IEEE Subnetwork Access Protocol */ -#define NLPID_CLNP 0x81 /* ISO/IEC 8473 */ -#define NLPID_ESIS 0x82 /* ISO/IEC 9542 */ -#define NLPID_ISIS 0x83 /* ISO/IEC ISIS */ -#define NLPID_Q933 0x08 /* CCITT Q.933 */ - -/* Miscellaneous */ -#define WAN_IFNAME_SZ 15 /* max length of the interface name */ -#define WAN_DRVNAME_SZ 15 /* max length of the link driver name */ -#define WAN_ADDRESS_SZ 31 /* max length of the WAN media address */ -#define USED_BY_FIELD 8 /* max length of the used by field */ - -/* Defines for UDP PACKET TYPE */ -#define UDP_PTPIPE_TYPE 0x01 -#define UDP_FPIPE_TYPE 0x02 -#define UDP_CPIPE_TYPE 0x03 -#define UDP_DRVSTATS_TYPE 0x04 -#define UDP_INVALID_TYPE 0x05 - -/* Command return code */ -#define CMD_OK 0 /* normal firmware return code */ -#define CMD_TIMEOUT 0xFF /* firmware command timed out */ - -/* UDP Packet Management */ -#define UDP_PKT_FRM_STACK 0x00 -#define UDP_PKT_FRM_NETWORK 0x01 - -/* Maximum interrupt test counter */ -#define MAX_INTR_TEST_COUNTER 100 - -/* Critical Values for RACE conditions*/ -#define CRITICAL_IN_ISR 0xA1 -#define CRITICAL_INTR_HANDLED 0xB1 - -/****** Data Types **********************************************************/ - -/*---------------------------------------------------------------------------- - * X.25-specific link-level configuration. - */ -typedef struct wan_x25_conf -{ - unsigned lo_pvc; /* lowest permanent circuit number */ - unsigned hi_pvc; /* highest permanent circuit number */ - unsigned lo_svc; /* lowest switched circuit number */ - unsigned hi_svc; /* highest switched circuit number */ - unsigned hdlc_window; /* HDLC window size (1..7) */ - unsigned pkt_window; /* X.25 packet window size (1..7) */ - unsigned t1; /* HDLC timer T1, sec (1..30) */ - unsigned t2; /* HDLC timer T2, sec (0..29) */ - unsigned t4; /* HDLC supervisory frame timer = T4 * T1 */ - unsigned n2; /* HDLC retransmission limit (1..30) */ - unsigned t10_t20; /* X.25 RESTART timeout, sec (1..255) */ - unsigned t11_t21; /* X.25 CALL timeout, sec (1..255) */ - unsigned t12_t22; /* X.25 RESET timeout, sec (1..255) */ - unsigned t13_t23; /* X.25 CLEAR timeout, sec (1..255) */ - unsigned t16_t26; /* X.25 INTERRUPT timeout, sec (1..255) */ - unsigned t28; /* X.25 REGISTRATION timeout, sec (1..255) */ - unsigned r10_r20; /* RESTART retransmission limit (0..250) */ - unsigned r12_r22; /* RESET retransmission limit (0..250) */ - unsigned r13_r23; /* CLEAR retransmission limit (0..250) */ - unsigned ccitt_compat; /* compatibility mode: 1988/1984/1980 */ - unsigned x25_conf_opt; /* User defined x25 config optoins */ - unsigned char LAPB_hdlc_only; /* Run in HDLC only mode */ - unsigned char logging; /* Control connection logging */ - unsigned char oob_on_modem; /* Whether to send modem status to the user app */ -} wan_x25_conf_t; - -/*---------------------------------------------------------------------------- - * Frame relay specific link-level configuration. - */ -typedef struct wan_fr_conf -{ - unsigned signalling; /* local in-channel signalling type */ - unsigned t391; /* link integrity verification timer */ - unsigned t392; /* polling verification timer */ - unsigned n391; /* full status polling cycle counter */ - unsigned n392; /* error threshold counter */ - unsigned n393; /* monitored events counter */ - unsigned dlci_num; /* number of DLCs (access node) */ - unsigned dlci[100]; /* List of all DLCIs */ -} wan_fr_conf_t; - -/*---------------------------------------------------------------------------- - * PPP-specific link-level configuration. - */ -typedef struct wan_ppp_conf -{ - unsigned restart_tmr; /* restart timer */ - unsigned auth_rsrt_tmr; /* authentication timer */ - unsigned auth_wait_tmr; /* authentication timer */ - unsigned mdm_fail_tmr; /* modem failure timer */ - unsigned dtr_drop_tmr; /* DTR drop timer */ - unsigned connect_tmout; /* connection timeout */ - unsigned conf_retry; /* max. retry */ - unsigned term_retry; /* max. retry */ - unsigned fail_retry; /* max. retry */ - unsigned auth_retry; /* max. retry */ - unsigned auth_options; /* authentication opt. */ - unsigned ip_options; /* IP options */ - char authenticator; /* AUTHENTICATOR or not */ - char ip_mode; /* Static/Host/Peer */ -} wan_ppp_conf_t; - -/*---------------------------------------------------------------------------- - * CHDLC-specific link-level configuration. - */ -typedef struct wan_chdlc_conf -{ - unsigned char ignore_dcd; /* Protocol options: */ - unsigned char ignore_cts; /* Ignore these to determine */ - unsigned char ignore_keepalive; /* link status (Yes or No) */ - unsigned char hdlc_streaming; /* hdlc_streaming mode (Y/N) */ - unsigned char receive_only; /* no transmit buffering (Y/N) */ - unsigned keepalive_tx_tmr; /* transmit keepalive timer */ - unsigned keepalive_rx_tmr; /* receive keepalive timer */ - unsigned keepalive_err_margin; /* keepalive_error_tolerance */ - unsigned slarp_timer; /* SLARP request timer */ -} wan_chdlc_conf_t; - - -/*---------------------------------------------------------------------------- - * WAN device configuration. Passed to ROUTER_SETUP IOCTL. - */ -typedef struct wandev_conf -{ - unsigned magic; /* magic number (for verification) */ - unsigned config_id; /* configuration structure identifier */ - /****** hardware configuration ******/ - unsigned ioport; /* adapter I/O port base */ - unsigned long maddr; /* dual-port memory address */ - unsigned msize; /* dual-port memory size */ - int irq; /* interrupt request level */ - int dma; /* DMA request level */ - char S514_CPU_no[1]; /* S514 PCI adapter CPU number ('A' or 'B') */ - unsigned PCI_slot_no; /* S514 PCI adapter slot number */ - char auto_pci_cfg; /* S515 PCI automatic slot detection */ - char comm_port; /* Communication Port (PRI=0, SEC=1) */ - unsigned bps; /* data transfer rate */ - unsigned mtu; /* maximum transmit unit size */ - unsigned udp_port; /* UDP port for management */ - unsigned char ttl; /* Time To Live for UDP security */ - unsigned char ft1; /* FT1 Configurator Option */ - char interface; /* RS-232/V.35, etc. */ - char clocking; /* external/internal */ - char line_coding; /* NRZ/NRZI/FM0/FM1, etc. */ - char station; /* DTE/DCE, primary/secondary, etc. */ - char connection; /* permanent/switched/on-demand */ - char read_mode; /* read mode: Polling or interrupt */ - char receive_only; /* disable tx buffers */ - char tty; /* Create a fake tty device */ - unsigned tty_major; /* Major number for wanpipe tty device */ - unsigned tty_minor; /* Minor number for wanpipe tty device */ - unsigned tty_mode; /* TTY operation mode SYNC or ASYNC */ - char backup; /* Backup Mode */ - unsigned hw_opt[4]; /* other hardware options */ - unsigned reserved[4]; - /****** arbitrary data ***************/ - unsigned data_size; /* data buffer size */ - void* data; /* data buffer, e.g. firmware */ - union /****** protocol-specific ************/ - { - wan_x25_conf_t x25; /* X.25 configuration */ - wan_ppp_conf_t ppp; /* PPP configuration */ - wan_fr_conf_t fr; /* frame relay configuration */ - wan_chdlc_conf_t chdlc; /* Cisco HDLC configuration */ - } u; -} wandev_conf_t; - -/* 'config_id' definitions */ -#define WANCONFIG_X25 101 /* X.25 link */ -#define WANCONFIG_FR 102 /* frame relay link */ -#define WANCONFIG_PPP 103 /* synchronous PPP link */ -#define WANCONFIG_CHDLC 104 /* Cisco HDLC Link */ -#define WANCONFIG_BSC 105 /* BiSync Streaming */ -#define WANCONFIG_HDLC 106 /* HDLC Support */ -#define WANCONFIG_MPPP 107 /* Multi Port PPP over RAW CHDLC */ - /* - * Configuration options defines. + * wanrouter.h Legacy declarations kept around until X25 is removed */ -/* general options */ -#define WANOPT_OFF 0 -#define WANOPT_ON 1 -#define WANOPT_NO 0 -#define WANOPT_YES 1 - -/* intercace options */ -#define WANOPT_RS232 0 -#define WANOPT_V35 1 - -/* data encoding options */ -#define WANOPT_NRZ 0 -#define WANOPT_NRZI 1 -#define WANOPT_FM0 2 -#define WANOPT_FM1 3 - -/* link type options */ -#define WANOPT_POINTTOPOINT 0 /* RTS always active */ -#define WANOPT_MULTIDROP 1 /* RTS is active when transmitting */ - -/* clocking options */ -#define WANOPT_EXTERNAL 0 -#define WANOPT_INTERNAL 1 - -/* station options */ -#define WANOPT_DTE 0 -#define WANOPT_DCE 1 -#define WANOPT_CPE 0 -#define WANOPT_NODE 1 -#define WANOPT_SECONDARY 0 -#define WANOPT_PRIMARY 1 - -/* connection options */ -#define WANOPT_PERMANENT 0 /* DTR always active */ -#define WANOPT_SWITCHED 1 /* use DTR to setup link (dial-up) */ -#define WANOPT_ONDEMAND 2 /* activate DTR only before sending */ - -/* frame relay in-channel signalling */ -#define WANOPT_FR_ANSI 1 /* ANSI T1.617 Annex D */ -#define WANOPT_FR_Q933 2 /* ITU Q.933A */ -#define WANOPT_FR_LMI 3 /* LMI */ - -/* PPP IP Mode Options */ -#define WANOPT_PPP_STATIC 0 -#define WANOPT_PPP_HOST 1 -#define WANOPT_PPP_PEER 2 - -/* ASY Mode Options */ -#define WANOPT_ONE 1 -#define WANOPT_TWO 2 -#define WANOPT_ONE_AND_HALF 3 - -#define WANOPT_NONE 0 -#define WANOPT_ODD 1 -#define WANOPT_EVEN 2 - -/* CHDLC Protocol Options */ -/* DF Commented out for now. - -#define WANOPT_CHDLC_NO_DCD IGNORE_DCD_FOR_LINK_STAT -#define WANOPT_CHDLC_NO_CTS IGNORE_CTS_FOR_LINK_STAT -#define WANOPT_CHDLC_NO_KEEPALIVE IGNORE_KPALV_FOR_LINK_STAT -*/ - -/* Port options */ -#define WANOPT_PRI 0 -#define WANOPT_SEC 1 -/* read mode */ -#define WANOPT_INTR 0 -#define WANOPT_POLL 1 - -#define WANOPT_TTY_SYNC 0 -#define WANOPT_TTY_ASYNC 1 -/*---------------------------------------------------------------------------- - * WAN Link Status Info (for ROUTER_STAT IOCTL). - */ -typedef struct wandev_stat -{ - unsigned state; /* link state */ - unsigned ndev; /* number of configured interfaces */ - - /* link/interface configuration */ - unsigned connection; /* permanent/switched/on-demand */ - unsigned media_type; /* Frame relay/PPP/X.25/SDLC, etc. */ - unsigned mtu; /* max. transmit unit for this device */ - - /* physical level statistics */ - unsigned modem_status; /* modem status */ - unsigned rx_frames; /* received frames count */ - unsigned rx_overruns; /* receiver overrun error count */ - unsigned rx_crc_err; /* receive CRC error count */ - unsigned rx_aborts; /* received aborted frames count */ - unsigned rx_bad_length; /* unexpetedly long/short frames count */ - unsigned rx_dropped; /* frames discarded at device level */ - unsigned tx_frames; /* transmitted frames count */ - unsigned tx_underruns; /* aborted transmissions (underruns) count */ - unsigned tx_timeouts; /* transmission timeouts */ - unsigned tx_rejects; /* other transmit errors */ - - /* media level statistics */ - unsigned rx_bad_format; /* frames with invalid format */ - unsigned rx_bad_addr; /* frames with invalid media address */ - unsigned tx_retries; /* frames re-transmitted */ - unsigned reserved[16]; /* reserved for future use */ -} wandev_stat_t; +#ifndef _UAPI_ROUTER_H +#define _UAPI_ROUTER_H /* 'state' defines */ enum wan_states @@ -365,88 +11,7 @@ enum wan_states WAN_UNCONFIGURED, /* link/channel is not configured */ WAN_DISCONNECTED, /* link/channel is disconnected */ WAN_CONNECTING, /* connection is in progress */ - WAN_CONNECTED, /* link/channel is operational */ - WAN_LIMIT, /* for verification only */ - WAN_DUALPORT, /* for Dual Port cards */ - WAN_DISCONNECTING, - WAN_FT1_READY /* FT1 Configurator Ready */ + WAN_CONNECTED /* link/channel is operational */ }; -enum { - WAN_LOCAL_IP, - WAN_POINTOPOINT_IP, - WAN_NETMASK_IP, - WAN_BROADCAST_IP -}; - -/* 'modem_status' masks */ -#define WAN_MODEM_CTS 0x0001 /* CTS line active */ -#define WAN_MODEM_DCD 0x0002 /* DCD line active */ -#define WAN_MODEM_DTR 0x0010 /* DTR line active */ -#define WAN_MODEM_RTS 0x0020 /* RTS line active */ - -/*---------------------------------------------------------------------------- - * WAN interface (logical channel) configuration (for ROUTER_IFNEW IOCTL). - */ -typedef struct wanif_conf -{ - unsigned magic; /* magic number */ - unsigned config_id; /* configuration identifier */ - char name[WAN_IFNAME_SZ+1]; /* interface name, ASCIIZ */ - char addr[WAN_ADDRESS_SZ+1]; /* media address, ASCIIZ */ - char usedby[USED_BY_FIELD]; /* used by API or WANPIPE */ - unsigned idle_timeout; /* sec, before disconnecting */ - unsigned hold_timeout; /* sec, before re-connecting */ - unsigned cir; /* Committed Information Rate fwd,bwd*/ - unsigned bc; /* Committed Burst Size fwd, bwd */ - unsigned be; /* Excess Burst Size fwd, bwd */ - unsigned char enable_IPX; /* Enable or Disable IPX */ - unsigned char inarp; /* Send Inverse ARP requests Y/N */ - unsigned inarp_interval; /* sec, between InARP requests */ - unsigned long network_number; /* Network Number for IPX */ - char mc; /* Multicast on or off */ - char local_addr[WAN_ADDRESS_SZ+1];/* local media address, ASCIIZ */ - unsigned char port; /* board port */ - unsigned char protocol; /* prococol used in this channel (TCPOX25 or X25) */ - char pap; /* PAP enabled or disabled */ - char chap; /* CHAP enabled or disabled */ - unsigned char userid[511]; /* List of User Id */ - unsigned char passwd[511]; /* List of passwords */ - unsigned char sysname[31]; /* Name of the system */ - unsigned char ignore_dcd; /* Protocol options: */ - unsigned char ignore_cts; /* Ignore these to determine */ - unsigned char ignore_keepalive; /* link status (Yes or No) */ - unsigned char hdlc_streaming; /* Hdlc streaming mode (Y/N) */ - unsigned keepalive_tx_tmr; /* transmit keepalive timer */ - unsigned keepalive_rx_tmr; /* receive keepalive timer */ - unsigned keepalive_err_margin; /* keepalive_error_tolerance */ - unsigned slarp_timer; /* SLARP request timer */ - unsigned char ttl; /* Time To Live for UDP security */ - char interface; /* RS-232/V.35, etc. */ - char clocking; /* external/internal */ - unsigned bps; /* data transfer rate */ - unsigned mtu; /* maximum transmit unit size */ - unsigned char if_down; /* brind down interface when disconnected */ - unsigned char gateway; /* Is this interface a gateway */ - unsigned char true_if_encoding; /* Set the dev->type to true board protocol */ - - unsigned char asy_data_trans; /* async API options */ - unsigned char rts_hs_for_receive; /* async Protocol options */ - unsigned char xon_xoff_hs_for_receive; - unsigned char xon_xoff_hs_for_transmit; - unsigned char dcd_hs_for_transmit; - unsigned char cts_hs_for_transmit; - unsigned char async_mode; - unsigned tx_bits_per_char; - unsigned rx_bits_per_char; - unsigned stop_bits; - unsigned char parity; - unsigned break_timer; - unsigned inter_char_timer; - unsigned rx_complete_length; - unsigned xon_char; - unsigned xoff_char; - unsigned char receive_only; /* no transmit buffering (Y/N) */ -} wanif_conf_t; - #endif /* _UAPI_ROUTER_H */ diff --git a/include/uapi/linux/wimax/i2400m.h b/include/uapi/linux/wimax/i2400m.h index 62d35615356..fd198bc24a3 100644 --- a/include/uapi/linux/wimax/i2400m.h +++ b/include/uapi/linux/wimax/i2400m.h @@ -122,7 +122,7 @@ #define __LINUX__WIMAX__I2400M_H__ #include <linux/types.h> - +#include <linux/if_ether.h> /* * Host Device Interface (HDI) common to all busses @@ -487,7 +487,7 @@ struct i2400m_tlv_l4_message_versions { struct i2400m_tlv_detailed_device_info { struct i2400m_tlv_hdr hdr; __u8 reserved1[400]; - __u8 mac_address[6]; + __u8 mac_address[ETH_ALEN]; __u8 reserved2[2]; } __attribute__((packed)); diff --git a/include/uapi/linux/xattr.h b/include/uapi/linux/xattr.h index 26607bd965f..c38355c1f3c 100644 --- a/include/uapi/linux/xattr.h +++ b/include/uapi/linux/xattr.h @@ -7,27 +7,40 @@ Copyright (c) 2001-2002 Silicon Graphics, Inc. All Rights Reserved. Copyright (c) 2004 Red Hat, Inc., James Morris <jmorris@redhat.com> */ + +#include <linux/libc-compat.h> + #ifndef _UAPI_LINUX_XATTR_H #define _UAPI_LINUX_XATTR_H +#ifdef __UAPI_DEF_XATTR +#define __USE_KERNEL_XATTR_DEFS + #define XATTR_CREATE 0x1 /* set value, fail if attr already exists */ #define XATTR_REPLACE 0x2 /* set value, fail if attr does not exist */ +#endif /* Namespaces */ #define XATTR_OS2_PREFIX "os2." -#define XATTR_OS2_PREFIX_LEN (sizeof (XATTR_OS2_PREFIX) - 1) +#define XATTR_OS2_PREFIX_LEN (sizeof(XATTR_OS2_PREFIX) - 1) + +#define XATTR_MAC_OSX_PREFIX "osx." +#define XATTR_MAC_OSX_PREFIX_LEN (sizeof(XATTR_MAC_OSX_PREFIX) - 1) + +#define XATTR_BTRFS_PREFIX "btrfs." +#define XATTR_BTRFS_PREFIX_LEN (sizeof(XATTR_BTRFS_PREFIX) - 1) #define XATTR_SECURITY_PREFIX "security." -#define XATTR_SECURITY_PREFIX_LEN (sizeof (XATTR_SECURITY_PREFIX) - 1) +#define XATTR_SECURITY_PREFIX_LEN (sizeof(XATTR_SECURITY_PREFIX) - 1) #define XATTR_SYSTEM_PREFIX "system." -#define XATTR_SYSTEM_PREFIX_LEN (sizeof (XATTR_SYSTEM_PREFIX) - 1) +#define XATTR_SYSTEM_PREFIX_LEN (sizeof(XATTR_SYSTEM_PREFIX) - 1) #define XATTR_TRUSTED_PREFIX "trusted." -#define XATTR_TRUSTED_PREFIX_LEN (sizeof (XATTR_TRUSTED_PREFIX) - 1) +#define XATTR_TRUSTED_PREFIX_LEN (sizeof(XATTR_TRUSTED_PREFIX) - 1) #define XATTR_USER_PREFIX "user." -#define XATTR_USER_PREFIX_LEN (sizeof (XATTR_USER_PREFIX) - 1) +#define XATTR_USER_PREFIX_LEN (sizeof(XATTR_USER_PREFIX) - 1) /* Security namespace */ #define XATTR_EVM_SUFFIX "evm" diff --git a/include/uapi/linux/xfrm.h b/include/uapi/linux/xfrm.h index 28e493b5b94..25e5dd916ba 100644 --- a/include/uapi/linux/xfrm.h +++ b/include/uapi/linux/xfrm.h @@ -297,6 +297,9 @@ enum xfrm_attr_type_t { XFRMA_MARK, /* struct xfrm_mark */ XFRMA_TFCPAD, /* __u32 */ XFRMA_REPLAY_ESN_VAL, /* struct xfrm_replay_esn */ + XFRMA_SA_EXTRA_FLAGS, /* __u32 */ + XFRMA_PROTO, /* __u8 */ + XFRMA_ADDRESS_FILTER, /* struct xfrm_address_filter */ __XFRMA_MAX #define XFRMA_MAX (__XFRMA_MAX - 1) @@ -367,6 +370,8 @@ struct xfrm_usersa_info { #define XFRM_STATE_ESN 128 }; +#define XFRM_SA_XFLAG_DONT_ENCAP_DSCP 1 + struct xfrm_usersa_id { xfrm_address_t daddr; __be32 spi; @@ -471,6 +476,14 @@ struct xfrm_user_mapping { __be16 new_sport; }; +struct xfrm_address_filter { + xfrm_address_t saddr; + xfrm_address_t daddr; + __u16 family; + __u8 splen; + __u8 dplen; +}; + #ifndef __KERNEL__ /* backwards compatibility for userspace */ #define XFRMGRP_ACQUIRE 1 diff --git a/include/uapi/linux/zorro.h b/include/uapi/linux/zorro.h new file mode 100644 index 00000000000..59d021b242e --- /dev/null +++ b/include/uapi/linux/zorro.h @@ -0,0 +1,113 @@ +/* + * linux/zorro.h -- Amiga AutoConfig (Zorro) Bus Definitions + * + * Copyright (C) 1995--2003 Geert Uytterhoeven + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#ifndef _UAPI_LINUX_ZORRO_H +#define _UAPI_LINUX_ZORRO_H + +#include <linux/types.h> + + + /* + * Each Zorro board has a 32-bit ID of the form + * + * mmmmmmmmmmmmmmmmppppppppeeeeeeee + * + * with + * + * mmmmmmmmmmmmmmmm 16-bit Manufacturer ID (assigned by CBM (sigh)) + * pppppppp 8-bit Product ID (assigned by manufacturer) + * eeeeeeee 8-bit Extended Product ID (currently only used + * for some GVP boards) + */ + + +#define ZORRO_MANUF(id) ((id) >> 16) +#define ZORRO_PROD(id) (((id) >> 8) & 0xff) +#define ZORRO_EPC(id) ((id) & 0xff) + +#define ZORRO_ID(manuf, prod, epc) \ + ((ZORRO_MANUF_##manuf << 16) | ((prod) << 8) | (epc)) + +typedef __u32 zorro_id; + + +/* Include the ID list */ +#include <linux/zorro_ids.h> + + + /* + * GVP identifies most of its products through the 'extended product code' + * (epc). The epc has to be ANDed with the GVP_PRODMASK before the + * identification. + */ + +#define GVP_PRODMASK (0xf8) +#define GVP_SCSICLKMASK (0x01) + +enum GVP_flags { + GVP_IO = 0x01, + GVP_ACCEL = 0x02, + GVP_SCSI = 0x04, + GVP_24BITDMA = 0x08, + GVP_25BITDMA = 0x10, + GVP_NOBANK = 0x20, + GVP_14MHZ = 0x40, +}; + + +struct Node { + __be32 ln_Succ; /* Pointer to next (successor) */ + __be32 ln_Pred; /* Pointer to previous (predecessor) */ + __u8 ln_Type; + __s8 ln_Pri; /* Priority, for sorting */ + __be32 ln_Name; /* ID string, null terminated */ +} __packed; + +struct ExpansionRom { + /* -First 16 bytes of the expansion ROM */ + __u8 er_Type; /* Board type, size and flags */ + __u8 er_Product; /* Product number, assigned by manufacturer */ + __u8 er_Flags; /* Flags */ + __u8 er_Reserved03; /* Must be zero ($ff inverted) */ + __be16 er_Manufacturer; /* Unique ID, ASSIGNED BY COMMODORE-AMIGA! */ + __be32 er_SerialNumber; /* Available for use by manufacturer */ + __be16 er_InitDiagVec; /* Offset to optional "DiagArea" structure */ + __u8 er_Reserved0c; + __u8 er_Reserved0d; + __u8 er_Reserved0e; + __u8 er_Reserved0f; +} __packed; + +/* er_Type board type bits */ +#define ERT_TYPEMASK 0xc0 +#define ERT_ZORROII 0xc0 +#define ERT_ZORROIII 0x80 + +/* other bits defined in er_Type */ +#define ERTB_MEMLIST 5 /* Link RAM into free memory list */ +#define ERTF_MEMLIST (1<<5) + +struct ConfigDev { + struct Node cd_Node; + __u8 cd_Flags; /* (read/write) */ + __u8 cd_Pad; /* reserved */ + struct ExpansionRom cd_Rom; /* copy of board's expansion ROM */ + __be32 cd_BoardAddr; /* where in memory the board was placed */ + __be32 cd_BoardSize; /* size of board in bytes */ + __be16 cd_SlotAddr; /* which slot number (PRIVATE) */ + __be16 cd_SlotSize; /* number of slots (PRIVATE) */ + __be32 cd_Driver; /* pointer to node of driver */ + __be32 cd_NextCD; /* linked list of drivers to config */ + __be32 cd_Unused[4]; /* for whatever the driver wants */ +} __packed; + +#define ZORRO_NUM_AUTO 16 + +#endif /* _UAPI_LINUX_ZORRO_H */ diff --git a/include/uapi/linux/zorro_ids.h b/include/uapi/linux/zorro_ids.h new file mode 100644 index 00000000000..74bc53bcfdc --- /dev/null +++ b/include/uapi/linux/zorro_ids.h @@ -0,0 +1,552 @@ +/* + * Zorro board IDs + * + * Please keep sorted. + */ + + +#define ZORRO_MANUF_PACIFIC_PERIPHERALS 0x00D3 +#define ZORRO_PROD_PACIFIC_PERIPHERALS_SE_2000_A500 ZORRO_ID(PACIFIC_PERIPHERALS, 0x00, 0) +#define ZORRO_PROD_PACIFIC_PERIPHERALS_SCSI ZORRO_ID(PACIFIC_PERIPHERALS, 0x0A, 0) + +#define ZORRO_MANUF_MACROSYSTEMS_USA_2 0x0100 +#define ZORRO_PROD_MACROSYSTEMS_WARP_ENGINE ZORRO_ID(MACROSYSTEMS_USA_2, 0x13, 0) + +#define ZORRO_MANUF_KUPKE_1 0x00DD +#define ZORRO_PROD_KUPKE_GOLEM_RAM_BOX_2MB ZORRO_ID(KUPKE_1, 0x00, 0) + +#define ZORRO_MANUF_MEMPHIS 0x0100 +#define ZORRO_PROD_MEMPHIS_STORMBRINGER ZORRO_ID(MEMPHIS, 0x00, 0) + +#define ZORRO_MANUF_3_STATE 0x0200 +#define ZORRO_PROD_3_STATE_MEGAMIX_2000 ZORRO_ID(3_STATE, 0x02, 0) + +#define ZORRO_MANUF_COMMODORE_BRAUNSCHWEIG 0x0201 +#define ZORRO_PROD_CBM_A2088_A2286 ZORRO_ID(COMMODORE_BRAUNSCHWEIG, 0x01, 0) +#define ZORRO_PROD_CBM_A2286 ZORRO_ID(COMMODORE_BRAUNSCHWEIG, 0x02, 0) +#define ZORRO_PROD_CBM_A4091_1 ZORRO_ID(COMMODORE_BRAUNSCHWEIG, 0x54, 0) +#define ZORRO_PROD_CBM_A2386SX_1 ZORRO_ID(COMMODORE_BRAUNSCHWEIG, 0x67, 0) + +#define ZORRO_MANUF_COMMODORE_WEST_CHESTER_1 0x0202 +#define ZORRO_PROD_CBM_A2090A ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x01, 0) +#define ZORRO_PROD_CBM_A590_A2091_1 ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x02, 0) +#define ZORRO_PROD_CBM_A590_A2091_2 ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x03, 0) +#define ZORRO_PROD_CBM_A2090B ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x04, 0) +#define ZORRO_PROD_CBM_A2060 ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x09, 0) +#define ZORRO_PROD_CBM_A590_A2052_A2058_A2091 ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x0A, 0) +#define ZORRO_PROD_CBM_A560_RAM ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x20, 0) +#define ZORRO_PROD_CBM_A2232_PROTOTYPE ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x45, 0) +#define ZORRO_PROD_CBM_A2232 ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x46, 0) +#define ZORRO_PROD_CBM_A2620 ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x50, 0) +#define ZORRO_PROD_CBM_A2630 ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x51, 0) +#define ZORRO_PROD_CBM_A4091_2 ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x54, 0) +#define ZORRO_PROD_CBM_A2065_1 ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x5A, 0) +#define ZORRO_PROD_CBM_ROMULATOR ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x60, 0) +#define ZORRO_PROD_CBM_A3000_TEST_FIXTURE ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x61, 0) +#define ZORRO_PROD_CBM_A2386SX_2 ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x67, 0) +#define ZORRO_PROD_CBM_A2065_2 ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x70, 0) + +#define ZORRO_MANUF_COMMODORE_WEST_CHESTER_2 0x0203 +#define ZORRO_PROD_CBM_A2090A_CM ZORRO_ID(COMMODORE_WEST_CHESTER_2, 0x03, 0) + +#define ZORRO_MANUF_PROGRESSIVE_PERIPHERALS_AND_SYSTEMS_2 0x02F4 +#define ZORRO_PROD_PPS_EXP8000 ZORRO_ID(PROGRESSIVE_PERIPHERALS_AND_SYSTEMS_2, 0x02, 0) + +#define ZORRO_MANUF_KOLFF_COMPUTER_SUPPLIES 0x02FF +#define ZORRO_PROD_KCS_POWER_PC_BOARD ZORRO_ID(KOLFF_COMPUTER_SUPPLIES, 0x00, 0) + +#define ZORRO_MANUF_CARDCO_1 0x03EC +#define ZORRO_PROD_CARDCO_KRONOS_2000_1 ZORRO_ID(CARDCO_1, 0x04, 0) +#define ZORRO_PROD_CARDCO_A1000_1 ZORRO_ID(CARDCO_1, 0x0C, 0) +#define ZORRO_PROD_CARDCO_ESCORT ZORRO_ID(CARDCO_1, 0x0E, 0) +#define ZORRO_PROD_CARDCO_A2410 ZORRO_ID(CARDCO_1, 0xF5, 0) + +#define ZORRO_MANUF_A_SQUARED 0x03ED +#define ZORRO_PROD_A_SQUARED_LIVE_2000 ZORRO_ID(A_SQUARED, 0x01, 0) + +#define ZORRO_MANUF_COMSPEC_COMMUNICATIONS 0x03EE +#define ZORRO_PROD_COMSPEC_COMMUNICATIONS_AX2000 ZORRO_ID(COMSPEC_COMMUNICATIONS, 0x01, 0) + +#define ZORRO_MANUF_ANAKIN_RESEARCH 0x03F1 +#define ZORRO_PROD_ANAKIN_RESEARCH_EASYL ZORRO_ID(ANAKIN_RESEARCH, 0x01, 0) + +#define ZORRO_MANUF_MICROBOTICS 0x03F2 +#define ZORRO_PROD_MICROBOTICS_STARBOARD_II ZORRO_ID(MICROBOTICS, 0x00, 0) +#define ZORRO_PROD_MICROBOTICS_STARDRIVE ZORRO_ID(MICROBOTICS, 0x02, 0) +#define ZORRO_PROD_MICROBOTICS_8_UP_A ZORRO_ID(MICROBOTICS, 0x03, 0) +#define ZORRO_PROD_MICROBOTICS_8_UP_Z ZORRO_ID(MICROBOTICS, 0x04, 0) +#define ZORRO_PROD_MICROBOTICS_DELTA_RAM ZORRO_ID(MICROBOTICS, 0x20, 0) +#define ZORRO_PROD_MICROBOTICS_8_STAR_RAM ZORRO_ID(MICROBOTICS, 0x40, 0) +#define ZORRO_PROD_MICROBOTICS_8_STAR ZORRO_ID(MICROBOTICS, 0x41, 0) +#define ZORRO_PROD_MICROBOTICS_VXL_RAM_32 ZORRO_ID(MICROBOTICS, 0x44, 0) +#define ZORRO_PROD_MICROBOTICS_VXL_68030 ZORRO_ID(MICROBOTICS, 0x45, 0) +#define ZORRO_PROD_MICROBOTICS_DELTA ZORRO_ID(MICROBOTICS, 0x60, 0) +#define ZORRO_PROD_MICROBOTICS_MBX_1200_1200Z_RAM ZORRO_ID(MICROBOTICS, 0x81, 0) +#define ZORRO_PROD_MICROBOTICS_HARDFRAME_2000_1 ZORRO_ID(MICROBOTICS, 0x96, 0) +#define ZORRO_PROD_MICROBOTICS_HARDFRAME_2000_2 ZORRO_ID(MICROBOTICS, 0x9E, 0) +#define ZORRO_PROD_MICROBOTICS_MBX_1200_1200Z ZORRO_ID(MICROBOTICS, 0xC1, 0) + +#define ZORRO_MANUF_ACCESS_ASSOCIATES_ALEGRA 0x03F4 + +#define ZORRO_MANUF_EXPANSION_TECHNOLOGIES 0x03F6 + +#define ZORRO_MANUF_ASDG 0x03FF +#define ZORRO_PROD_ASDG_MEMORY_1 ZORRO_ID(ASDG, 0x01, 0) +#define ZORRO_PROD_ASDG_MEMORY_2 ZORRO_ID(ASDG, 0x02, 0) +#define ZORRO_PROD_ASDG_EB920_LAN_ROVER ZORRO_ID(ASDG, 0xFE, 0) +#define ZORRO_PROD_ASDG_GPIB_DUALIEEE488_TWIN_X ZORRO_ID(ASDG, 0xFF, 0) + +#define ZORRO_MANUF_IMTRONICS_1 0x0404 +#define ZORRO_PROD_IMTRONICS_HURRICANE_2800_1 ZORRO_ID(IMTRONICS_1, 0x39, 0) +#define ZORRO_PROD_IMTRONICS_HURRICANE_2800_2 ZORRO_ID(IMTRONICS_1, 0x57, 0) + +#define ZORRO_MANUF_CBM_UNIVERSITY_OF_LOWELL 0x0406 +#define ZORRO_PROD_CBM_A2410 ZORRO_ID(CBM_UNIVERSITY_OF_LOWELL, 0x00, 0) + +#define ZORRO_MANUF_AMERISTAR 0x041D +#define ZORRO_PROD_AMERISTAR_A2065 ZORRO_ID(AMERISTAR, 0x01, 0) +#define ZORRO_PROD_AMERISTAR_A560 ZORRO_ID(AMERISTAR, 0x09, 0) +#define ZORRO_PROD_AMERISTAR_A4066 ZORRO_ID(AMERISTAR, 0x0A, 0) + +#define ZORRO_MANUF_SUPRA 0x0420 +#define ZORRO_PROD_SUPRA_SUPRADRIVE_4x4 ZORRO_ID(SUPRA, 0x01, 0) +#define ZORRO_PROD_SUPRA_1000_RAM ZORRO_ID(SUPRA, 0x02, 0) +#define ZORRO_PROD_SUPRA_2000_DMA ZORRO_ID(SUPRA, 0x03, 0) +#define ZORRO_PROD_SUPRA_500 ZORRO_ID(SUPRA, 0x05, 0) +#define ZORRO_PROD_SUPRA_500_SCSI ZORRO_ID(SUPRA, 0x08, 0) +#define ZORRO_PROD_SUPRA_500XP_2000_RAM ZORRO_ID(SUPRA, 0x09, 0) +#define ZORRO_PROD_SUPRA_500RX_2000_RAM ZORRO_ID(SUPRA, 0x0A, 0) +#define ZORRO_PROD_SUPRA_2400ZI ZORRO_ID(SUPRA, 0x0B, 0) +#define ZORRO_PROD_SUPRA_500XP_SUPRADRIVE_WORDSYNC ZORRO_ID(SUPRA, 0x0C, 0) +#define ZORRO_PROD_SUPRA_SUPRADRIVE_WORDSYNC_II ZORRO_ID(SUPRA, 0x0D, 0) +#define ZORRO_PROD_SUPRA_2400ZIPLUS ZORRO_ID(SUPRA, 0x10, 0) + +#define ZORRO_MANUF_COMPUTER_SYSTEMS_ASSOCIATES 0x0422 +#define ZORRO_PROD_CSA_MAGNUM ZORRO_ID(COMPUTER_SYSTEMS_ASSOCIATES, 0x11, 0) +#define ZORRO_PROD_CSA_12_GAUGE ZORRO_ID(COMPUTER_SYSTEMS_ASSOCIATES, 0x15, 0) + +#define ZORRO_MANUF_MARC_MICHAEL_GROTH 0x0439 + +#define ZORRO_MANUF_M_TECH 0x0502 +#define ZORRO_PROD_MTEC_AT500_1 ZORRO_ID(M_TECH, 0x03, 0) + +#define ZORRO_MANUF_GREAT_VALLEY_PRODUCTS_1 0x06E1 +#define ZORRO_PROD_GVP_IMPACT_SERIES_I ZORRO_ID(GREAT_VALLEY_PRODUCTS_1, 0x08, 0) + +#define ZORRO_MANUF_BYTEBOX 0x07DA +#define ZORRO_PROD_BYTEBOX_A500 ZORRO_ID(BYTEBOX, 0x00, 0) + +#define ZORRO_MANUF_DKB_POWER_COMPUTING 0x07DC +#define ZORRO_PROD_DKB_POWER_COMPUTING_SECUREKEY ZORRO_ID(DKB_POWER_COMPUTING, 0x09, 0) +#define ZORRO_PROD_DKB_POWER_COMPUTING_DKM_3128 ZORRO_ID(DKB_POWER_COMPUTING, 0x0E, 0) +#define ZORRO_PROD_DKB_POWER_COMPUTING_RAPID_FIRE ZORRO_ID(DKB_POWER_COMPUTING, 0x0F, 0) +#define ZORRO_PROD_DKB_POWER_COMPUTING_DKM_1202 ZORRO_ID(DKB_POWER_COMPUTING, 0x10, 0) +#define ZORRO_PROD_DKB_POWER_COMPUTING_COBRA_VIPER_II_68EC030 ZORRO_ID(DKB_POWER_COMPUTING, 0x12, 0) +#define ZORRO_PROD_DKB_POWER_COMPUTING_WILDFIRE_060_1 ZORRO_ID(DKB_POWER_COMPUTING, 0x17, 0) +#define ZORRO_PROD_DKB_POWER_COMPUTING_WILDFIRE_060_2 ZORRO_ID(DKB_POWER_COMPUTING, 0xFF, 0) + +#define ZORRO_MANUF_GREAT_VALLEY_PRODUCTS_2 0x07E1 +#define ZORRO_PROD_GVP_IMPACT_SERIES_I_4K ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x01, 0) +#define ZORRO_PROD_GVP_IMPACT_SERIES_I_16K_2 ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x02, 0) +#define ZORRO_PROD_GVP_IMPACT_SERIES_I_16K_3 ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x03, 0) +#define ZORRO_PROD_GVP_IMPACT_3001_IDE_1 ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x08, 0) +#define ZORRO_PROD_GVP_IMPACT_3001_RAM ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x09, 0) +#define ZORRO_PROD_GVP_IMPACT_SERIES_II_RAM_1 ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0A, 0) +#define ZORRO_PROD_GVP_EPC_BASE ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0) +#define ZORRO_PROD_GVP_GFORCE_040_1 ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0x20) +#define ZORRO_PROD_GVP_GFORCE_040_SCSI_1 ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0x30) +#define ZORRO_PROD_GVP_A1291 ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0x40) +#define ZORRO_PROD_GVP_COMBO_030_R4 ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0x60) +#define ZORRO_PROD_GVP_COMBO_030_R4_SCSI ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0x70) +#define ZORRO_PROD_GVP_PHONEPAK ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0x78) +#define ZORRO_PROD_GVP_IO_EXTENDER ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0x98) +#define ZORRO_PROD_GVP_GFORCE_030 ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0xa0) +#define ZORRO_PROD_GVP_GFORCE_030_SCSI ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0xb0) +#define ZORRO_PROD_GVP_A530 ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0xc0) +#define ZORRO_PROD_GVP_A530_SCSI ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0xd0) +#define ZORRO_PROD_GVP_COMBO_030_R3 ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0xe0) +#define ZORRO_PROD_GVP_COMBO_030_R3_SCSI ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0xf0) +#define ZORRO_PROD_GVP_SERIES_II ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0xf8) +#define ZORRO_PROD_GVP_IMPACT_3001_IDE_2 ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0D, 0) +/*#define ZORRO_PROD_GVP_A2000_030 ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0D, 0)*/ +/*#define ZORRO_PROD_GVP_GFORCE_040_SCSI_2 ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0D, 0)*/ +#define ZORRO_PROD_GVP_GFORCE_040_060 ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x16, 0) +#define ZORRO_PROD_GVP_IMPACT_VISION_24 ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x20, 0) +#define ZORRO_PROD_GVP_GFORCE_040_2 ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0xFF, 0) + +#define ZORRO_MANUF_CALIFORNIA_ACCESS_SYNERGY 0x07E5 +#define ZORRO_PROD_CALIFORNIA_ACCESS_SYNERGY_MALIBU ZORRO_ID(CALIFORNIA_ACCESS_SYNERGY, 0x01, 0) + +#define ZORRO_MANUF_XETEC 0x07E6 +#define ZORRO_PROD_XETEC_FASTCARD ZORRO_ID(XETEC, 0x01, 0) +#define ZORRO_PROD_XETEC_FASTCARD_RAM ZORRO_ID(XETEC, 0x02, 0) +#define ZORRO_PROD_XETEC_FASTCARD_PLUS ZORRO_ID(XETEC, 0x03, 0) + +#define ZORRO_MANUF_PROGRESSIVE_PERIPHERALS_AND_SYSTEMS 0x07EA +#define ZORRO_PROD_PPS_MERCURY ZORRO_ID(PROGRESSIVE_PERIPHERALS_AND_SYSTEMS, 0x00, 0) +#define ZORRO_PROD_PPS_A3000_68040 ZORRO_ID(PROGRESSIVE_PERIPHERALS_AND_SYSTEMS, 0x01, 0) +#define ZORRO_PROD_PPS_A2000_68040 ZORRO_ID(PROGRESSIVE_PERIPHERALS_AND_SYSTEMS, 0x69, 0) +#define ZORRO_PROD_PPS_ZEUS ZORRO_ID(PROGRESSIVE_PERIPHERALS_AND_SYSTEMS, 0x96, 0) +#define ZORRO_PROD_PPS_A500_68040 ZORRO_ID(PROGRESSIVE_PERIPHERALS_AND_SYSTEMS, 0xBB, 0) + +#define ZORRO_MANUF_XEBEC 0x07EC + +#define ZORRO_MANUF_SPIRIT_TECHNOLOGY 0x07F2 +#define ZORRO_PROD_SPIRIT_TECHNOLOGY_INSIDER_IN1000 ZORRO_ID(SPIRIT_TECHNOLOGY, 0x01, 0) +#define ZORRO_PROD_SPIRIT_TECHNOLOGY_INSIDER_IN500 ZORRO_ID(SPIRIT_TECHNOLOGY, 0x02, 0) +#define ZORRO_PROD_SPIRIT_TECHNOLOGY_SIN500 ZORRO_ID(SPIRIT_TECHNOLOGY, 0x03, 0) +#define ZORRO_PROD_SPIRIT_TECHNOLOGY_HDA_506 ZORRO_ID(SPIRIT_TECHNOLOGY, 0x04, 0) +#define ZORRO_PROD_SPIRIT_TECHNOLOGY_AX_S ZORRO_ID(SPIRIT_TECHNOLOGY, 0x05, 0) +#define ZORRO_PROD_SPIRIT_TECHNOLOGY_OCTABYTE ZORRO_ID(SPIRIT_TECHNOLOGY, 0x06, 0) +#define ZORRO_PROD_SPIRIT_TECHNOLOGY_INMATE ZORRO_ID(SPIRIT_TECHNOLOGY, 0x08, 0) + +#define ZORRO_MANUF_SPIRIT_TECHNOLOGY_2 0x07F3 + +#define ZORRO_MANUF_BSC_ALFADATA_1 0x07FE +#define ZORRO_PROD_BSC_ALF_3_1 ZORRO_ID(BSC_ALFADATA_1, 0x03, 0) + +#define ZORRO_MANUF_BSC_ALFADATA_2 0x0801 +#define ZORRO_PROD_BSC_ALF_2_1 ZORRO_ID(BSC_ALFADATA_2, 0x01, 0) +#define ZORRO_PROD_BSC_ALF_2_2 ZORRO_ID(BSC_ALFADATA_2, 0x02, 0) +#define ZORRO_PROD_BSC_ALF_3_2 ZORRO_ID(BSC_ALFADATA_2, 0x03, 0) + +#define ZORRO_MANUF_CARDCO_2 0x0802 +#define ZORRO_PROD_CARDCO_KRONOS_2000_2 ZORRO_ID(CARDCO_2, 0x04, 0) +#define ZORRO_PROD_CARDCO_A1000_2 ZORRO_ID(CARDCO_2, 0x0C, 0) + +#define ZORRO_MANUF_JOCHHEIM 0x0804 +#define ZORRO_PROD_JOCHHEIM_RAM ZORRO_ID(JOCHHEIM, 0x01, 0) + +#define ZORRO_MANUF_CHECKPOINT_TECHNOLOGIES 0x0807 +#define ZORRO_PROD_CHECKPOINT_TECHNOLOGIES_SERIAL_SOLUTION ZORRO_ID(CHECKPOINT_TECHNOLOGIES, 0x00, 0) + +#define ZORRO_MANUF_EDOTRONIK 0x0810 +#define ZORRO_PROD_EDOTRONIK_IEEE_488 ZORRO_ID(EDOTRONIK, 0x01, 0) +#define ZORRO_PROD_EDOTRONIK_8032 ZORRO_ID(EDOTRONIK, 0x02, 0) +#define ZORRO_PROD_EDOTRONIK_MULTISERIAL ZORRO_ID(EDOTRONIK, 0x03, 0) +#define ZORRO_PROD_EDOTRONIK_VIDEODIGITIZER ZORRO_ID(EDOTRONIK, 0x04, 0) +#define ZORRO_PROD_EDOTRONIK_PARALLEL_IO ZORRO_ID(EDOTRONIK, 0x05, 0) +#define ZORRO_PROD_EDOTRONIK_PIC_PROTOYPING ZORRO_ID(EDOTRONIK, 0x06, 0) +#define ZORRO_PROD_EDOTRONIK_ADC ZORRO_ID(EDOTRONIK, 0x07, 0) +#define ZORRO_PROD_EDOTRONIK_VME ZORRO_ID(EDOTRONIK, 0x08, 0) +#define ZORRO_PROD_EDOTRONIK_DSP96000 ZORRO_ID(EDOTRONIK, 0x09, 0) + +#define ZORRO_MANUF_NES_INC 0x0813 +#define ZORRO_PROD_NES_INC_RAM ZORRO_ID(NES_INC, 0x00, 0) + +#define ZORRO_MANUF_ICD 0x0817 +#define ZORRO_PROD_ICD_ADVANTAGE_2000_SCSI ZORRO_ID(ICD, 0x01, 0) +#define ZORRO_PROD_ICD_ADVANTAGE_IDE ZORRO_ID(ICD, 0x03, 0) +#define ZORRO_PROD_ICD_ADVANTAGE_2080_RAM ZORRO_ID(ICD, 0x04, 0) + +#define ZORRO_MANUF_KUPKE_2 0x0819 +#define ZORRO_PROD_KUPKE_OMTI ZORRO_ID(KUPKE_2, 0x01, 0) +#define ZORRO_PROD_KUPKE_SCSI_II ZORRO_ID(KUPKE_2, 0x02, 0) +#define ZORRO_PROD_KUPKE_GOLEM_BOX ZORRO_ID(KUPKE_2, 0x03, 0) +#define ZORRO_PROD_KUPKE_030_882 ZORRO_ID(KUPKE_2, 0x04, 0) +#define ZORRO_PROD_KUPKE_SCSI_AT ZORRO_ID(KUPKE_2, 0x05, 0) + +#define ZORRO_MANUF_GREAT_VALLEY_PRODUCTS_3 0x081D +#define ZORRO_PROD_GVP_A2000_RAM8 ZORRO_ID(GREAT_VALLEY_PRODUCTS_3, 0x09, 0) +#define ZORRO_PROD_GVP_IMPACT_SERIES_II_RAM_2 ZORRO_ID(GREAT_VALLEY_PRODUCTS_3, 0x0A, 0) + +#define ZORRO_MANUF_INTERWORKS_NETWORK 0x081E + +#define ZORRO_MANUF_HARDITAL_SYNTHESIS 0x0820 +#define ZORRO_PROD_HARDITAL_SYNTHESIS_TQM_68030_68882 ZORRO_ID(HARDITAL_SYNTHESIS, 0x14, 0) + +#define ZORRO_MANUF_APPLIED_ENGINEERING 0x0828 +#define ZORRO_PROD_APPLIED_ENGINEERING_DL2000 ZORRO_ID(APPLIED_ENGINEERING, 0x10, 0) +#define ZORRO_PROD_APPLIED_ENGINEERING_RAM_WORKS ZORRO_ID(APPLIED_ENGINEERING, 0xE0, 0) + +#define ZORRO_MANUF_BSC_ALFADATA_3 0x082C +#define ZORRO_PROD_BSC_OKTAGON_2008 ZORRO_ID(BSC_ALFADATA_3, 0x05, 0) +#define ZORRO_PROD_BSC_TANDEM_AT_2008_508 ZORRO_ID(BSC_ALFADATA_3, 0x06, 0) +#define ZORRO_PROD_BSC_ALFA_RAM_1200 ZORRO_ID(BSC_ALFADATA_3, 0x07, 0) +#define ZORRO_PROD_BSC_OKTAGON_2008_RAM ZORRO_ID(BSC_ALFADATA_3, 0x08, 0) +#define ZORRO_PROD_BSC_MULTIFACE_I ZORRO_ID(BSC_ALFADATA_3, 0x10, 0) +#define ZORRO_PROD_BSC_MULTIFACE_II ZORRO_ID(BSC_ALFADATA_3, 0x11, 0) +#define ZORRO_PROD_BSC_MULTIFACE_III ZORRO_ID(BSC_ALFADATA_3, 0x12, 0) +#define ZORRO_PROD_BSC_FRAMEMASTER_II ZORRO_ID(BSC_ALFADATA_3, 0x20, 0) +#define ZORRO_PROD_BSC_GRAFFITI_RAM ZORRO_ID(BSC_ALFADATA_3, 0x21, 0) +#define ZORRO_PROD_BSC_GRAFFITI_REG ZORRO_ID(BSC_ALFADATA_3, 0x22, 0) +#define ZORRO_PROD_BSC_ISDN_MASTERCARD ZORRO_ID(BSC_ALFADATA_3, 0x40, 0) +#define ZORRO_PROD_BSC_ISDN_MASTERCARD_II ZORRO_ID(BSC_ALFADATA_3, 0x41, 0) + +#define ZORRO_MANUF_PHOENIX 0x0835 +#define ZORRO_PROD_PHOENIX_ST506 ZORRO_ID(PHOENIX, 0x21, 0) +#define ZORRO_PROD_PHOENIX_SCSI ZORRO_ID(PHOENIX, 0x22, 0) +#define ZORRO_PROD_PHOENIX_RAM ZORRO_ID(PHOENIX, 0xBE, 0) + +#define ZORRO_MANUF_ADVANCED_STORAGE_SYSTEMS 0x0836 +#define ZORRO_PROD_ADVANCED_STORAGE_SYSTEMS_NEXUS ZORRO_ID(ADVANCED_STORAGE_SYSTEMS, 0x01, 0) +#define ZORRO_PROD_ADVANCED_STORAGE_SYSTEMS_NEXUS_RAM ZORRO_ID(ADVANCED_STORAGE_SYSTEMS, 0x08, 0) + +#define ZORRO_MANUF_IMPULSE 0x0838 +#define ZORRO_PROD_IMPULSE_FIRECRACKER_24 ZORRO_ID(IMPULSE, 0x00, 0) + +#define ZORRO_MANUF_IVS 0x0840 +#define ZORRO_PROD_IVS_GRANDSLAM_PIC_2 ZORRO_ID(IVS, 0x02, 0) +#define ZORRO_PROD_IVS_GRANDSLAM_PIC_1 ZORRO_ID(IVS, 0x04, 0) +#define ZORRO_PROD_IVS_OVERDRIVE ZORRO_ID(IVS, 0x10, 0) +#define ZORRO_PROD_IVS_TRUMPCARD_CLASSIC ZORRO_ID(IVS, 0x30, 0) +#define ZORRO_PROD_IVS_TRUMPCARD_PRO_GRANDSLAM ZORRO_ID(IVS, 0x34, 0) +#define ZORRO_PROD_IVS_META_4 ZORRO_ID(IVS, 0x40, 0) +#define ZORRO_PROD_IVS_WAVETOOLS ZORRO_ID(IVS, 0xBF, 0) +#define ZORRO_PROD_IVS_VECTOR_1 ZORRO_ID(IVS, 0xF3, 0) +#define ZORRO_PROD_IVS_VECTOR_2 ZORRO_ID(IVS, 0xF4, 0) + +#define ZORRO_MANUF_VECTOR_1 0x0841 +#define ZORRO_PROD_VECTOR_CONNECTION_1 ZORRO_ID(VECTOR_1, 0xE3, 0) + +#define ZORRO_MANUF_XPERT_PRODEV 0x0845 +#define ZORRO_PROD_XPERT_PRODEV_VISIONA_RAM ZORRO_ID(XPERT_PRODEV, 0x01, 0) +#define ZORRO_PROD_XPERT_PRODEV_VISIONA_REG ZORRO_ID(XPERT_PRODEV, 0x02, 0) +#define ZORRO_PROD_XPERT_PRODEV_MERLIN_RAM ZORRO_ID(XPERT_PRODEV, 0x03, 0) +#define ZORRO_PROD_XPERT_PRODEV_MERLIN_REG_1 ZORRO_ID(XPERT_PRODEV, 0x04, 0) +#define ZORRO_PROD_XPERT_PRODEV_MERLIN_REG_2 ZORRO_ID(XPERT_PRODEV, 0xC9, 0) + +#define ZORRO_MANUF_HYDRA_SYSTEMS 0x0849 +#define ZORRO_PROD_HYDRA_SYSTEMS_AMIGANET ZORRO_ID(HYDRA_SYSTEMS, 0x01, 0) + +#define ZORRO_MANUF_SUNRIZE_INDUSTRIES 0x084F +#define ZORRO_PROD_SUNRIZE_INDUSTRIES_AD1012 ZORRO_ID(SUNRIZE_INDUSTRIES, 0x01, 0) +#define ZORRO_PROD_SUNRIZE_INDUSTRIES_AD516 ZORRO_ID(SUNRIZE_INDUSTRIES, 0x02, 0) +#define ZORRO_PROD_SUNRIZE_INDUSTRIES_DD512 ZORRO_ID(SUNRIZE_INDUSTRIES, 0x03, 0) + +#define ZORRO_MANUF_TRICERATOPS 0x0850 +#define ZORRO_PROD_TRICERATOPS_MULTI_IO ZORRO_ID(TRICERATOPS, 0x01, 0) + +#define ZORRO_MANUF_APPLIED_MAGIC 0x0851 +#define ZORRO_PROD_APPLIED_MAGIC_DMI_RESOLVER ZORRO_ID(APPLIED_MAGIC, 0x01, 0) +#define ZORRO_PROD_APPLIED_MAGIC_DIGITAL_BROADCASTER ZORRO_ID(APPLIED_MAGIC, 0x06, 0) + +#define ZORRO_MANUF_GFX_BASE 0x085E +#define ZORRO_PROD_GFX_BASE_GDA_1_VRAM ZORRO_ID(GFX_BASE, 0x00, 0) +#define ZORRO_PROD_GFX_BASE_GDA_1 ZORRO_ID(GFX_BASE, 0x01, 0) + +#define ZORRO_MANUF_ROCTEC 0x0860 +#define ZORRO_PROD_ROCTEC_RH_800C ZORRO_ID(ROCTEC, 0x01, 0) +#define ZORRO_PROD_ROCTEC_RH_800C_RAM ZORRO_ID(ROCTEC, 0x01, 0) + +#define ZORRO_MANUF_KATO 0x0861 +#define ZORRO_PROD_KATO_MELODY ZORRO_ID(KATO, 0x80, 0) +/* ID clash!! */ +#define ZORRO_MANUF_HELFRICH_1 0x0861 +#define ZORRO_PROD_HELFRICH_RAINBOW_II ZORRO_ID(HELFRICH_1, 0x20, 0) +#define ZORRO_PROD_HELFRICH_RAINBOW_III ZORRO_ID(HELFRICH_1, 0x21, 0) + +#define ZORRO_MANUF_ATLANTIS 0x0862 + +#define ZORRO_MANUF_PROTAR 0x0864 + +#define ZORRO_MANUF_ACS 0x0865 + +#define ZORRO_MANUF_SOFTWARE_RESULTS_ENTERPRISES 0x0866 +#define ZORRO_PROD_SOFTWARE_RESULTS_ENTERPRISES_GOLDEN_GATE_2_BUS_PLUS ZORRO_ID(SOFTWARE_RESULTS_ENTERPRISES, 0x01, 0) + +#define ZORRO_MANUF_MASOBOSHI 0x086D +#define ZORRO_PROD_MASOBOSHI_MASTER_CARD_SC201 ZORRO_ID(MASOBOSHI, 0x03, 0) +#define ZORRO_PROD_MASOBOSHI_MASTER_CARD_MC702 ZORRO_ID(MASOBOSHI, 0x04, 0) +#define ZORRO_PROD_MASOBOSHI_MVD_819 ZORRO_ID(MASOBOSHI, 0x07, 0) + +#define ZORRO_MANUF_MAINHATTAN_DATA 0x086F +#define ZORRO_PROD_MAINHATTAN_DATA_IDE ZORRO_ID(MAINHATTAN_DATA, 0x01, 0) + +#define ZORRO_MANUF_VILLAGE_TRONIC 0x0877 +#define ZORRO_PROD_VILLAGE_TRONIC_DOMINO_RAM ZORRO_ID(VILLAGE_TRONIC, 0x01, 0) +#define ZORRO_PROD_VILLAGE_TRONIC_DOMINO_REG ZORRO_ID(VILLAGE_TRONIC, 0x02, 0) +#define ZORRO_PROD_VILLAGE_TRONIC_DOMINO_16M_PROTOTYPE ZORRO_ID(VILLAGE_TRONIC, 0x03, 0) +#define ZORRO_PROD_VILLAGE_TRONIC_PICASSO_II_II_PLUS_RAM ZORRO_ID(VILLAGE_TRONIC, 0x0B, 0) +#define ZORRO_PROD_VILLAGE_TRONIC_PICASSO_II_II_PLUS_REG ZORRO_ID(VILLAGE_TRONIC, 0x0C, 0) +#define ZORRO_PROD_VILLAGE_TRONIC_PICASSO_II_II_PLUS_SEGMENTED_MODE ZORRO_ID(VILLAGE_TRONIC, 0x0D, 0) +#define ZORRO_PROD_VILLAGE_TRONIC_PICASSO_IV_Z2_RAM1 ZORRO_ID(VILLAGE_TRONIC, 0x15, 0) +#define ZORRO_PROD_VILLAGE_TRONIC_PICASSO_IV_Z2_RAM2 ZORRO_ID(VILLAGE_TRONIC, 0x16, 0) +#define ZORRO_PROD_VILLAGE_TRONIC_PICASSO_IV_Z2_REG ZORRO_ID(VILLAGE_TRONIC, 0x17, 0) +#define ZORRO_PROD_VILLAGE_TRONIC_PICASSO_IV_Z3 ZORRO_ID(VILLAGE_TRONIC, 0x18, 0) +#define ZORRO_PROD_VILLAGE_TRONIC_ARIADNE ZORRO_ID(VILLAGE_TRONIC, 0xC9, 0) +#define ZORRO_PROD_VILLAGE_TRONIC_ARIADNE2 ZORRO_ID(VILLAGE_TRONIC, 0xCA, 0) + +#define ZORRO_MANUF_UTILITIES_UNLIMITED 0x087B +#define ZORRO_PROD_UTILITIES_UNLIMITED_EMPLANT_DELUXE ZORRO_ID(UTILITIES_UNLIMITED, 0x15, 0) +#define ZORRO_PROD_UTILITIES_UNLIMITED_EMPLANT_DELUXE2 ZORRO_ID(UTILITIES_UNLIMITED, 0x20, 0) + +#define ZORRO_MANUF_AMITRIX 0x0880 +#define ZORRO_PROD_AMITRIX_MULTI_IO ZORRO_ID(AMITRIX, 0x01, 0) +#define ZORRO_PROD_AMITRIX_CD_RAM ZORRO_ID(AMITRIX, 0x02, 0) + +#define ZORRO_MANUF_ARMAX 0x0885 +#define ZORRO_PROD_ARMAX_OMNIBUS ZORRO_ID(ARMAX, 0x00, 0) + +#define ZORRO_MANUF_ZEUS 0x088D +#define ZORRO_PROD_ZEUS_SPIDER ZORRO_ID(ZEUS, 0x04, 0) + +#define ZORRO_MANUF_NEWTEK 0x088F +#define ZORRO_PROD_NEWTEK_VIDEOTOASTER ZORRO_ID(NEWTEK, 0x00, 0) + +#define ZORRO_MANUF_M_TECH_GERMANY 0x0890 +#define ZORRO_PROD_MTEC_AT500_2 ZORRO_ID(M_TECH_GERMANY, 0x01, 0) +#define ZORRO_PROD_MTEC_68030 ZORRO_ID(M_TECH_GERMANY, 0x03, 0) +#define ZORRO_PROD_MTEC_68020I ZORRO_ID(M_TECH_GERMANY, 0x06, 0) +#define ZORRO_PROD_MTEC_A1200_T68030_RTC ZORRO_ID(M_TECH_GERMANY, 0x20, 0) +#define ZORRO_PROD_MTEC_VIPER_MK_V_E_MATRIX_530 ZORRO_ID(M_TECH_GERMANY, 0x21, 0) +#define ZORRO_PROD_MTEC_8_MB_RAM ZORRO_ID(M_TECH_GERMANY, 0x22, 0) +#define ZORRO_PROD_MTEC_VIPER_MK_V_E_MATRIX_530_SCSI_IDE ZORRO_ID(M_TECH_GERMANY, 0x24, 0) + +#define ZORRO_MANUF_GREAT_VALLEY_PRODUCTS_4 0x0891 +#define ZORRO_PROD_GVP_EGS_28_24_SPECTRUM_RAM ZORRO_ID(GREAT_VALLEY_PRODUCTS_4, 0x01, 0) +#define ZORRO_PROD_GVP_EGS_28_24_SPECTRUM_REG ZORRO_ID(GREAT_VALLEY_PRODUCTS_4, 0x02, 0) + +#define ZORRO_MANUF_APOLLO_1 0x0892 +#define ZORRO_PROD_APOLLO_A1200 ZORRO_ID(APOLLO_1, 0x01, 0) + +#define ZORRO_MANUF_HELFRICH_2 0x0893 +#define ZORRO_PROD_HELFRICH_PICCOLO_RAM ZORRO_ID(HELFRICH_2, 0x05, 0) +#define ZORRO_PROD_HELFRICH_PICCOLO_REG ZORRO_ID(HELFRICH_2, 0x06, 0) +#define ZORRO_PROD_HELFRICH_PEGGY_PLUS_MPEG ZORRO_ID(HELFRICH_2, 0x07, 0) +#define ZORRO_PROD_HELFRICH_VIDEOCRUNCHER ZORRO_ID(HELFRICH_2, 0x08, 0) +#define ZORRO_PROD_HELFRICH_SD64_RAM ZORRO_ID(HELFRICH_2, 0x0A, 0) +#define ZORRO_PROD_HELFRICH_SD64_REG ZORRO_ID(HELFRICH_2, 0x0B, 0) + +#define ZORRO_MANUF_MACROSYSTEMS_USA 0x089B +#define ZORRO_PROD_MACROSYSTEMS_WARP_ENGINE_40xx ZORRO_ID(MACROSYSTEMS_USA, 0x13, 0) + +#define ZORRO_MANUF_ELBOX_COMPUTER 0x089E +#define ZORRO_PROD_ELBOX_COMPUTER_1200_4 ZORRO_ID(ELBOX_COMPUTER, 0x06, 0) + +#define ZORRO_MANUF_HARMS_PROFESSIONAL 0x0A00 +#define ZORRO_PROD_HARMS_PROFESSIONAL_030_PLUS ZORRO_ID(HARMS_PROFESSIONAL, 0x10, 0) +#define ZORRO_PROD_HARMS_PROFESSIONAL_3500 ZORRO_ID(HARMS_PROFESSIONAL, 0xD0, 0) + +#define ZORRO_MANUF_MICRONIK 0x0A50 +#define ZORRO_PROD_MICRONIK_RCA_120 ZORRO_ID(MICRONIK, 0x0A, 0) + +#define ZORRO_MANUF_MICRONIK2 0x0F0F +#define ZORRO_PROD_MICRONIK2_Z3I ZORRO_ID(MICRONIK2, 0x01, 0) + +#define ZORRO_MANUF_MEGAMICRO 0x1000 +#define ZORRO_PROD_MEGAMICRO_SCRAM_500 ZORRO_ID(MEGAMICRO, 0x03, 0) +#define ZORRO_PROD_MEGAMICRO_SCRAM_500_RAM ZORRO_ID(MEGAMICRO, 0x04, 0) + +#define ZORRO_MANUF_IMTRONICS_2 0x1028 +#define ZORRO_PROD_IMTRONICS_HURRICANE_2800_3 ZORRO_ID(IMTRONICS_2, 0x39, 0) +#define ZORRO_PROD_IMTRONICS_HURRICANE_2800_4 ZORRO_ID(IMTRONICS_2, 0x57, 0) + +/* unofficial ID */ +#define ZORRO_MANUF_INDIVIDUAL_COMPUTERS 0x1212 +#define ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA ZORRO_ID(INDIVIDUAL_COMPUTERS, 0x00, 0) +#define ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF ZORRO_ID(INDIVIDUAL_COMPUTERS, 0x17, 0) +#define ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL ZORRO_ID(INDIVIDUAL_COMPUTERS, 0x2A, 0) + +#define ZORRO_MANUF_KUPKE_3 0x1248 +#define ZORRO_PROD_KUPKE_GOLEM_HD_3000 ZORRO_ID(KUPKE_3, 0x01, 0) + +#define ZORRO_MANUF_ITH 0x1388 +#define ZORRO_PROD_ITH_ISDN_MASTER_II ZORRO_ID(ITH, 0x01, 0) + +#define ZORRO_MANUF_VMC 0x1389 +#define ZORRO_PROD_VMC_ISDN_BLASTER_Z2 ZORRO_ID(VMC, 0x01, 0) +#define ZORRO_PROD_VMC_HYPERCOM_4 ZORRO_ID(VMC, 0x02, 0) + +#define ZORRO_MANUF_INFORMATION 0x157C +#define ZORRO_PROD_INFORMATION_ISDN_ENGINE_I ZORRO_ID(INFORMATION, 0x64, 0) + +#define ZORRO_MANUF_VORTEX 0x2017 +#define ZORRO_PROD_VORTEX_GOLDEN_GATE_80386SX ZORRO_ID(VORTEX, 0x07, 0) +#define ZORRO_PROD_VORTEX_GOLDEN_GATE_RAM ZORRO_ID(VORTEX, 0x08, 0) +#define ZORRO_PROD_VORTEX_GOLDEN_GATE_80486 ZORRO_ID(VORTEX, 0x09, 0) + +#define ZORRO_MANUF_EXPANSION_SYSTEMS 0x2062 +#define ZORRO_PROD_EXPANSION_SYSTEMS_DATAFLYER_4000SX ZORRO_ID(EXPANSION_SYSTEMS, 0x01, 0) +#define ZORRO_PROD_EXPANSION_SYSTEMS_DATAFLYER_4000SX_RAM ZORRO_ID(EXPANSION_SYSTEMS, 0x02, 0) + +#define ZORRO_MANUF_READYSOFT 0x2100 +#define ZORRO_PROD_READYSOFT_AMAX_II_IV ZORRO_ID(READYSOFT, 0x01, 0) + +#define ZORRO_MANUF_PHASE5 0x2140 +#define ZORRO_PROD_PHASE5_BLIZZARD_RAM ZORRO_ID(PHASE5, 0x01, 0) +#define ZORRO_PROD_PHASE5_BLIZZARD ZORRO_ID(PHASE5, 0x02, 0) +#define ZORRO_PROD_PHASE5_BLIZZARD_1220_IV ZORRO_ID(PHASE5, 0x06, 0) +#define ZORRO_PROD_PHASE5_FASTLANE_Z3_RAM ZORRO_ID(PHASE5, 0x0A, 0) +#define ZORRO_PROD_PHASE5_BLIZZARD_1230_II_FASTLANE_Z3_CYBERSCSI_CYBERSTORM060 ZORRO_ID(PHASE5, 0x0B, 0) +#define ZORRO_PROD_PHASE5_BLIZZARD_1220_CYBERSTORM ZORRO_ID(PHASE5, 0x0C, 0) +#define ZORRO_PROD_PHASE5_BLIZZARD_1230 ZORRO_ID(PHASE5, 0x0D, 0) +#define ZORRO_PROD_PHASE5_BLIZZARD_1230_IV_1260 ZORRO_ID(PHASE5, 0x11, 0) +#define ZORRO_PROD_PHASE5_BLIZZARD_2060 ZORRO_ID(PHASE5, 0x18, 0) +#define ZORRO_PROD_PHASE5_CYBERSTORM_MK_II ZORRO_ID(PHASE5, 0x19, 0) +#define ZORRO_PROD_PHASE5_CYBERVISION64 ZORRO_ID(PHASE5, 0x22, 0) +#define ZORRO_PROD_PHASE5_CYBERVISION64_3D_PROTOTYPE ZORRO_ID(PHASE5, 0x32, 0) +#define ZORRO_PROD_PHASE5_CYBERVISION64_3D ZORRO_ID(PHASE5, 0x43, 0) +#define ZORRO_PROD_PHASE5_CYBERSTORM_MK_III ZORRO_ID(PHASE5, 0x64, 0) +#define ZORRO_PROD_PHASE5_BLIZZARD_603E_PLUS ZORRO_ID(PHASE5, 0x6e, 0) + +#define ZORRO_MANUF_DPS 0x2169 +#define ZORRO_PROD_DPS_PERSONAL_ANIMATION_RECORDER ZORRO_ID(DPS, 0x01, 0) + +#define ZORRO_MANUF_APOLLO_2 0x2200 +#define ZORRO_PROD_APOLLO_A620_68020_1 ZORRO_ID(APOLLO_2, 0x00, 0) +#define ZORRO_PROD_APOLLO_A620_68020_2 ZORRO_ID(APOLLO_2, 0x01, 0) + +#define ZORRO_MANUF_APOLLO_3 0x2222 +#define ZORRO_PROD_APOLLO_AT_APOLLO ZORRO_ID(APOLLO_3, 0x22, 0) +#define ZORRO_PROD_APOLLO_1230_1240_1260_2030_4040_4060 ZORRO_ID(APOLLO_3, 0x23, 0) + +#define ZORRO_MANUF_PETSOFF_LP 0x38A5 +#define ZORRO_PROD_PETSOFF_LP_DELFINA ZORRO_ID(PETSOFF_LP, 0x00, 0) +#define ZORRO_PROD_PETSOFF_LP_DELFINA_LITE ZORRO_ID(PETSOFF_LP, 0x01, 0) + +#define ZORRO_MANUF_UWE_GERLACH 0x3FF7 +#define ZORRO_PROD_UWE_GERLACH_RAM_ROM ZORRO_ID(UWE_GERLACH, 0xd4, 0) + +#define ZORRO_MANUF_ACT 0x4231 +#define ZORRO_PROD_ACT_PRELUDE ZORRO_ID(ACT, 0x01, 0) + +#define ZORRO_MANUF_MACROSYSTEMS_GERMANY 0x4754 +#define ZORRO_PROD_MACROSYSTEMS_MAESTRO ZORRO_ID(MACROSYSTEMS_GERMANY, 0x03, 0) +#define ZORRO_PROD_MACROSYSTEMS_VLAB ZORRO_ID(MACROSYSTEMS_GERMANY, 0x04, 0) +#define ZORRO_PROD_MACROSYSTEMS_MAESTRO_PRO ZORRO_ID(MACROSYSTEMS_GERMANY, 0x05, 0) +#define ZORRO_PROD_MACROSYSTEMS_RETINA ZORRO_ID(MACROSYSTEMS_GERMANY, 0x06, 0) +#define ZORRO_PROD_MACROSYSTEMS_MULTI_EVOLUTION ZORRO_ID(MACROSYSTEMS_GERMANY, 0x08, 0) +#define ZORRO_PROD_MACROSYSTEMS_TOCCATA ZORRO_ID(MACROSYSTEMS_GERMANY, 0x0C, 0) +#define ZORRO_PROD_MACROSYSTEMS_RETINA_Z3 ZORRO_ID(MACROSYSTEMS_GERMANY, 0x10, 0) +#define ZORRO_PROD_MACROSYSTEMS_VLAB_MOTION ZORRO_ID(MACROSYSTEMS_GERMANY, 0x12, 0) +#define ZORRO_PROD_MACROSYSTEMS_ALTAIS ZORRO_ID(MACROSYSTEMS_GERMANY, 0x13, 0) +#define ZORRO_PROD_MACROSYSTEMS_FALCON_040 ZORRO_ID(MACROSYSTEMS_GERMANY, 0xFD, 0) + +#define ZORRO_MANUF_COMBITEC 0x6766 + +#define ZORRO_MANUF_SKI_PERIPHERALS 0x8000 +#define ZORRO_PROD_SKI_PERIPHERALS_MAST_FIREBALL ZORRO_ID(SKI_PERIPHERALS, 0x08, 0) +#define ZORRO_PROD_SKI_PERIPHERALS_SCSI_DUAL_SERIAL ZORRO_ID(SKI_PERIPHERALS, 0x80, 0) + +#define ZORRO_MANUF_REIS_WARE_2 0xA9AD +#define ZORRO_PROD_REIS_WARE_SCAN_KING ZORRO_ID(REIS_WARE_2, 0x11, 0) + +#define ZORRO_MANUF_CAMERON 0xAA01 +#define ZORRO_PROD_CAMERON_PERSONAL_A4 ZORRO_ID(CAMERON, 0x10, 0) + +#define ZORRO_MANUF_REIS_WARE 0xAA11 +#define ZORRO_PROD_REIS_WARE_HANDYSCANNER ZORRO_ID(REIS_WARE, 0x11, 0) + +#define ZORRO_MANUF_PHOENIX_2 0xB5A8 +#define ZORRO_PROD_PHOENIX_ST506_2 ZORRO_ID(PHOENIX_2, 0x21, 0) +#define ZORRO_PROD_PHOENIX_SCSI_2 ZORRO_ID(PHOENIX_2, 0x22, 0) +#define ZORRO_PROD_PHOENIX_RAM_2 ZORRO_ID(PHOENIX_2, 0xBE, 0) + +#define ZORRO_MANUF_COMBITEC_2 0xC008 +#define ZORRO_PROD_COMBITEC_HD ZORRO_ID(COMBITEC_2, 0x2A, 0) +#define ZORRO_PROD_COMBITEC_SRAM ZORRO_ID(COMBITEC_2, 0x2B, 0) + + + /* + * Test and illegal Manufacturer IDs. + */ + +#define ZORRO_MANUF_HACKER 0x07DB +#define ZORRO_PROD_GENERAL_PROTOTYPE ZORRO_ID(HACKER, 0x00, 0) +#define ZORRO_PROD_HACKER_SCSI ZORRO_ID(HACKER, 0x01, 0) +#define ZORRO_PROD_RESOURCE_MANAGEMENT_FORCE_QUICKNET_QN2000 ZORRO_ID(HACKER, 0x02, 0) +#define ZORRO_PROD_VECTOR_CONNECTION_2 ZORRO_ID(HACKER, 0xE0, 0) +#define ZORRO_PROD_VECTOR_CONNECTION_3 ZORRO_ID(HACKER, 0xE1, 0) +#define ZORRO_PROD_VECTOR_CONNECTION_4 ZORRO_ID(HACKER, 0xE2, 0) +#define ZORRO_PROD_VECTOR_CONNECTION_5 ZORRO_ID(HACKER, 0xE3, 0) |