diff options
Diffstat (limited to 'include/uapi/drm/i915_drm.h')
| -rw-r--r-- | include/uapi/drm/i915_drm.h | 90 |
1 files changed, 88 insertions, 2 deletions
diff --git a/include/uapi/drm/i915_drm.h b/include/uapi/drm/i915_drm.h index 07d59419fe6..ff57f07c324 100644 --- a/include/uapi/drm/i915_drm.h +++ b/include/uapi/drm/i915_drm.h @@ -33,6 +33,30 @@ * subject to backwards-compatibility constraints. */ +/** + * DOC: uevents generated by i915 on it's device node + * + * I915_L3_PARITY_UEVENT - Generated when the driver receives a parity mismatch + * event from the gpu l3 cache. Additional information supplied is ROW, + * BANK, SUBBANK, SLICE of the affected cacheline. Userspace should keep + * track of these events and if a specific cache-line seems to have a + * persistent error remap it with the l3 remapping tool supplied in + * intel-gpu-tools. The value supplied with the event is always 1. + * + * I915_ERROR_UEVENT - Generated upon error detection, currently only via + * hangcheck. The error detection event is a good indicator of when things + * began to go badly. The value supplied with the event is a 1 upon error + * detection, and a 0 upon reset completion, signifying no more error + * exists. NOTE: Disabling hangcheck or reset via module parameter will + * cause the related events to not be seen. + * + * I915_RESET_UEVENT - Event is generated just before an attempt to reset the + * the GPU. The value supplied with the event is always 1. NOTE: Disable + * reset via module parameter will cause this event to not be seen. + */ +#define I915_L3_PARITY_UEVENT "L3_PARITY_ERROR" +#define I915_ERROR_UEVENT "ERROR" +#define I915_RESET_UEVENT "RESET" /* Each region is a minimum of 16k, and there are at most 255 of them. */ @@ -198,6 +222,8 @@ typedef struct _drm_i915_sarea { #define DRM_I915_GEM_SET_CACHING 0x2f #define DRM_I915_GEM_GET_CACHING 0x30 #define DRM_I915_REG_READ 0x31 +#define DRM_I915_GET_RESET_STATS 0x32 +#define DRM_I915_GEM_USERPTR 0x33 #define DRM_IOCTL_I915_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t) #define DRM_IOCTL_I915_FLUSH DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH) @@ -247,6 +273,8 @@ typedef struct _drm_i915_sarea { #define DRM_IOCTL_I915_GEM_CONTEXT_CREATE DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_CONTEXT_CREATE, struct drm_i915_gem_context_create) #define DRM_IOCTL_I915_GEM_CONTEXT_DESTROY DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_CONTEXT_DESTROY, struct drm_i915_gem_context_destroy) #define DRM_IOCTL_I915_REG_READ DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_REG_READ, struct drm_i915_reg_read) +#define DRM_IOCTL_I915_GET_RESET_STATS DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GET_RESET_STATS, struct drm_i915_reset_stats) +#define DRM_IOCTL_I915_GEM_USERPTR DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_USERPTR, struct drm_i915_gem_userptr) /* Allow drivers to submit batchbuffers directly to hardware, relying * on the security mechanisms provided by hardware. @@ -305,11 +333,13 @@ typedef struct drm_i915_irq_wait { #define I915_PARAM_HAS_WAIT_TIMEOUT 19 #define I915_PARAM_HAS_SEMAPHORES 20 #define I915_PARAM_HAS_PRIME_VMAP_FLUSH 21 -#define I915_PARAM_RSVD_FOR_FUTURE_USE 22 +#define I915_PARAM_HAS_VEBOX 22 #define I915_PARAM_HAS_SECURE_BATCHES 23 #define I915_PARAM_HAS_PINNED_BATCHES 24 #define I915_PARAM_HAS_EXEC_NO_RELOC 25 #define I915_PARAM_HAS_EXEC_HANDLE_LUT 26 +#define I915_PARAM_HAS_WT 27 +#define I915_PARAM_CMD_PARSER_VERSION 28 typedef struct drm_i915_getparam { int param; @@ -660,6 +690,7 @@ struct drm_i915_gem_execbuffer2 { #define I915_EXEC_RENDER (1<<0) #define I915_EXEC_BSD (2<<0) #define I915_EXEC_BLT (3<<0) +#define I915_EXEC_VEBOX (4<<0) /* Used for switching the constants addressing mode on gen4+ RENDER ring. * Gen6+ only supports relative addressing to dynamic state (default) and @@ -693,7 +724,7 @@ struct drm_i915_gem_execbuffer2 { */ #define I915_EXEC_IS_PINNED (1<<10) -/** Provide a hint to the kernel that the command stream and auxilliary +/** Provide a hint to the kernel that the command stream and auxiliary * state buffers already holds the correct presumed addresses and so the * relocation process may be skipped if no buffers need to be moved in * preparation for the execbuffer. @@ -743,8 +774,32 @@ struct drm_i915_gem_busy { __u32 busy; }; +/** + * I915_CACHING_NONE + * + * GPU access is not coherent with cpu caches. Default for machines without an + * LLC. + */ #define I915_CACHING_NONE 0 +/** + * I915_CACHING_CACHED + * + * GPU access is coherent with cpu caches and furthermore the data is cached in + * last-level caches shared between cpu cores and the gpu GT. Default on + * machines with HAS_LLC. + */ #define I915_CACHING_CACHED 1 +/** + * I915_CACHING_DISPLAY + * + * Special GPU caching mode which is coherent with the scanout engines. + * Transparently falls back to I915_CACHING_NONE on platforms where no special + * cache mode (like write-through or gfdt flushing) is available. The kernel + * automatically sets this mode when using a buffer as a scanout target. + * Userspace can manually set this mode to avoid a costly stall and clflush in + * the hotpath of drawing the first frame. + */ +#define I915_CACHING_DISPLAY 2 struct drm_i915_gem_caching { /** @@ -980,4 +1035,35 @@ struct drm_i915_reg_read { __u64 offset; __u64 val; /* Return value */ }; + +struct drm_i915_reset_stats { + __u32 ctx_id; + __u32 flags; + + /* All resets since boot/module reload, for all contexts */ + __u32 reset_count; + + /* Number of batches lost when active in GPU, for this context */ + __u32 batch_active; + + /* Number of batches lost pending for execution, for this context */ + __u32 batch_pending; + + __u32 pad; +}; + +struct drm_i915_gem_userptr { + __u64 user_ptr; + __u64 user_size; + __u32 flags; +#define I915_USERPTR_READ_ONLY 0x1 +#define I915_USERPTR_UNSYNCHRONIZED 0x80000000 + /** + * Returned handle for the object. + * + * Object handles are nonzero. + */ + __u32 handle; +}; + #endif /* _UAPI_I915_DRM_H_ */ |