diff options
Diffstat (limited to 'include/sound/wm8903.h')
| -rw-r--r-- | include/sound/wm8903.h | 37 |
1 files changed, 27 insertions, 10 deletions
diff --git a/include/sound/wm8903.h b/include/sound/wm8903.h index b4a0db2307e..b310c5a3a95 100644 --- a/include/sound/wm8903.h +++ b/include/sound/wm8903.h @@ -11,19 +11,18 @@ #ifndef __LINUX_SND_WM8903_H #define __LINUX_SND_WM8903_H -/* Used to enable configuration of a GPIO to all zeros */ -#define WM8903_GPIO_NO_CONFIG 0x8000 +/* + * Used to enable configuration of a GPIO to all zeros; a gpio_cfg value of + * zero in platform data means "don't touch this pin". + */ +#define WM8903_GPIO_CONFIG_ZERO 0x8000 /* * R6 (0x06) - Mic Bias Control 0 */ -#define WM8903_MICDET_HYST_ENA 0x0080 /* MICDET_HYST_ENA */ -#define WM8903_MICDET_HYST_ENA_MASK 0x0080 /* MICDET_HYST_ENA */ -#define WM8903_MICDET_HYST_ENA_SHIFT 7 /* MICDET_HYST_ENA */ -#define WM8903_MICDET_HYST_ENA_WIDTH 1 /* MICDET_HYST_ENA */ -#define WM8903_MICDET_THR_MASK 0x0070 /* MICDET_THR - [6:4] */ -#define WM8903_MICDET_THR_SHIFT 4 /* MICDET_THR - [6:4] */ -#define WM8903_MICDET_THR_WIDTH 3 /* MICDET_THR - [6:4] */ +#define WM8903_MICDET_THR_MASK 0x0030 /* MICDET_THR - [5:4] */ +#define WM8903_MICDET_THR_SHIFT 4 /* MICDET_THR - [5:4] */ +#define WM8903_MICDET_THR_WIDTH 2 /* MICDET_THR - [5:4] */ #define WM8903_MICSHORT_THR_MASK 0x000C /* MICSHORT_THR - [3:2] */ #define WM8903_MICSHORT_THR_SHIFT 2 /* MICSHORT_THR - [3:2] */ #define WM8903_MICSHORT_THR_WIDTH 2 /* MICSHORT_THR - [3:2] */ @@ -37,6 +36,21 @@ #define WM8903_MICBIAS_ENA_WIDTH 1 /* MICBIAS_ENA */ /* + * WM8903_GPn_FN values + * + * See datasheets for list of valid values per pin + */ +#define WM8903_GPn_FN_GPIO_OUTPUT 0 +#define WM8903_GPn_FN_BCLK 1 +#define WM8903_GPn_FN_IRQ_OUTPT 2 +#define WM8903_GPn_FN_GPIO_INPUT 3 +#define WM8903_GPn_FN_MICBIAS_CURRENT_DETECT 4 +#define WM8903_GPn_FN_MICBIAS_SHORT_DETECT 5 +#define WM8903_GPn_FN_DMIC_LR_CLK_OUTPUT 6 +#define WM8903_GPn_FN_FLL_LOCK_OUTPUT 8 +#define WM8903_GPn_FN_FLL_CLOCK_OUTPUT 9 + +/* * R116 (0x74) - GPIO Control 1 */ #define WM8903_GP1_FN_MASK 0x1F00 /* GP1_FN - [12:8] */ @@ -231,6 +245,8 @@ #define WM8903_GP5_DB_SHIFT 0 /* GP5_DB */ #define WM8903_GP5_DB_WIDTH 1 /* GP5_DB */ +#define WM8903_NUM_GPIO 5 + struct wm8903_platform_data { bool irq_active_low; /* Set if IRQ active low, default high */ @@ -243,7 +259,8 @@ struct wm8903_platform_data { int micdet_delay; /* Delay after microphone detection (ms) */ - u32 gpio_cfg[5]; /* Default register values for GPIO pin mux */ + int gpio_base; + u32 gpio_cfg[WM8903_NUM_GPIO]; /* Default register values for GPIO pin mux */ }; #endif |