diff options
Diffstat (limited to 'include/scsi/scsi_transport_sas.h')
| -rw-r--r-- | include/scsi/scsi_transport_sas.h | 178 |
1 files changed, 145 insertions, 33 deletions
diff --git a/include/scsi/scsi_transport_sas.h b/include/scsi/scsi_transport_sas.h index b91400bfb02..0bd71e2702e 100644 --- a/include/scsi/scsi_transport_sas.h +++ b/include/scsi/scsi_transport_sas.h @@ -3,34 +3,38 @@ #include <linux/transport_class.h> #include <linux/types.h> +#include <linux/mutex.h> +#include <scsi/sas.h> struct scsi_transport_template; struct sas_rphy; +struct request; - -enum sas_device_type { - SAS_PHY_UNUSED, - SAS_END_DEVICE, - SAS_EDGE_EXPANDER_DEVICE, - SAS_FANOUT_EXPANDER_DEVICE, -}; - -enum sas_protocol { - SAS_PROTOCOL_SATA = 0x01, - SAS_PROTOCOL_SMP = 0x02, - SAS_PROTOCOL_STP = 0x04, - SAS_PROTOCOL_SSP = 0x08, -}; +static inline int sas_protocol_ata(enum sas_protocol proto) +{ + return ((proto & SAS_PROTOCOL_SATA) || + (proto & SAS_PROTOCOL_STP))? 1 : 0; +} enum sas_linkrate { - SAS_LINK_RATE_UNKNOWN, - SAS_PHY_DISABLED, - SAS_LINK_RATE_FAILED, - SAS_SATA_SPINUP_HOLD, - SAS_SATA_PORT_SELECTOR, - SAS_LINK_RATE_1_5_GBPS, - SAS_LINK_RATE_3_0_GBPS, - SAS_LINK_VIRTUAL, + /* These Values are defined in the SAS standard */ + SAS_LINK_RATE_UNKNOWN = 0, + SAS_PHY_DISABLED = 1, + SAS_PHY_RESET_PROBLEM = 2, + SAS_SATA_SPINUP_HOLD = 3, + SAS_SATA_PORT_SELECTOR = 4, + SAS_PHY_RESET_IN_PROGRESS = 5, + SAS_LINK_RATE_1_5_GBPS = 8, + SAS_LINK_RATE_G1 = SAS_LINK_RATE_1_5_GBPS, + SAS_LINK_RATE_3_0_GBPS = 9, + SAS_LINK_RATE_G2 = SAS_LINK_RATE_3_0_GBPS, + SAS_LINK_RATE_6_0_GBPS = 10, + SAS_LINK_RATE_12_0_GBPS = 11, + /* These are virtual to the transport class and may never + * be signalled normally since the standard defined field + * is only 4 bits */ + SAS_LINK_RATE_FAILED = 0x10, + SAS_PHY_VIRTUAL = 0x11, }; struct sas_identify { @@ -44,6 +48,7 @@ struct sas_identify { struct sas_phy { struct device dev; int number; + int enabled; /* phy identification */ struct sas_identify identify; @@ -54,10 +59,6 @@ struct sas_phy { enum sas_linkrate minimum_linkrate; enum sas_linkrate maximum_linkrate_hw; enum sas_linkrate maximum_linkrate; - u8 port_identifier; - - /* internal state */ - unsigned int local_attached : 1; /* link error statistics */ u32 invalid_dword_count; @@ -65,39 +66,112 @@ struct sas_phy { u32 loss_of_dword_sync_count; u32 phy_reset_problem_count; - /* the other end of the link */ - struct sas_rphy *rphy; + /* for the list of phys belonging to a port */ + struct list_head port_siblings; + + /* available to the lldd */ + void *hostdata; }; #define dev_to_phy(d) \ container_of((d), struct sas_phy, dev) -#define transport_class_to_phy(cdev) \ - dev_to_phy((cdev)->dev) +#define transport_class_to_phy(dev) \ + dev_to_phy((dev)->parent) #define phy_to_shost(phy) \ dev_to_shost((phy)->dev.parent) +struct request_queue; struct sas_rphy { struct device dev; struct sas_identify identify; struct list_head list; + struct request_queue *q; u32 scsi_target_id; }; #define dev_to_rphy(d) \ container_of((d), struct sas_rphy, dev) -#define transport_class_to_rphy(cdev) \ - dev_to_rphy((cdev)->dev) +#define transport_class_to_rphy(dev) \ + dev_to_rphy((dev)->parent) #define rphy_to_shost(rphy) \ dev_to_shost((rphy)->dev.parent) +#define target_to_rphy(targ) \ + dev_to_rphy((targ)->dev.parent) + +struct sas_end_device { + struct sas_rphy rphy; + /* flags */ + unsigned ready_led_meaning:1; + unsigned tlr_supported:1; + unsigned tlr_enabled:1; + /* parameters */ + u16 I_T_nexus_loss_timeout; + u16 initiator_response_timeout; +}; +#define rphy_to_end_device(r) \ + container_of((r), struct sas_end_device, rphy) + +struct sas_expander_device { + int level; + int next_port_id; + + #define SAS_EXPANDER_VENDOR_ID_LEN 8 + char vendor_id[SAS_EXPANDER_VENDOR_ID_LEN+1]; + #define SAS_EXPANDER_PRODUCT_ID_LEN 16 + char product_id[SAS_EXPANDER_PRODUCT_ID_LEN+1]; + #define SAS_EXPANDER_PRODUCT_REV_LEN 4 + char product_rev[SAS_EXPANDER_PRODUCT_REV_LEN+1]; + #define SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN 8 + char component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN+1]; + u16 component_id; + u8 component_revision_id; + + struct sas_rphy rphy; +}; +#define rphy_to_expander_device(r) \ + container_of((r), struct sas_expander_device, rphy) + +struct sas_port { + struct device dev; + + int port_identifier; + int num_phys; + /* port flags */ + unsigned int is_backlink:1; + + /* the other end of the link */ + struct sas_rphy *rphy; + + struct mutex phy_list_mutex; + struct list_head phy_list; +}; + +#define dev_to_sas_port(d) \ + container_of((d), struct sas_port, dev) +#define transport_class_to_sas_port(dev) \ + dev_to_sas_port((dev)->parent) + +struct sas_phy_linkrates { + enum sas_linkrate maximum_linkrate; + enum sas_linkrate minimum_linkrate; +}; /* The functions by which the transport class and the driver communicate */ struct sas_function_template { int (*get_linkerrors)(struct sas_phy *); + int (*get_enclosure_identifier)(struct sas_rphy *, u64 *); + int (*get_bay_identifier)(struct sas_rphy *); int (*phy_reset)(struct sas_phy *, int); + int (*phy_enable)(struct sas_phy *, int); + int (*phy_setup)(struct sas_phy *); + void (*phy_release)(struct sas_phy *); + int (*set_phy_speed)(struct sas_phy *, struct sas_phy_linkrates *); + int (*smp_handler)(struct Scsi_Host *, struct sas_rphy *, struct request *); }; +void sas_remove_children(struct device *); extern void sas_remove_host(struct Scsi_Host *); extern struct sas_phy *sas_phy_alloc(struct device *, int); @@ -106,14 +180,52 @@ extern int sas_phy_add(struct sas_phy *); extern void sas_phy_delete(struct sas_phy *); extern int scsi_is_sas_phy(const struct device *); -extern struct sas_rphy *sas_rphy_alloc(struct sas_phy *); +unsigned int sas_tlr_supported(struct scsi_device *); +unsigned int sas_is_tlr_enabled(struct scsi_device *); +void sas_disable_tlr(struct scsi_device *); +void sas_enable_tlr(struct scsi_device *); + +extern struct sas_rphy *sas_end_device_alloc(struct sas_port *); +extern struct sas_rphy *sas_expander_alloc(struct sas_port *, enum sas_device_type); void sas_rphy_free(struct sas_rphy *); extern int sas_rphy_add(struct sas_rphy *); +extern void sas_rphy_remove(struct sas_rphy *); extern void sas_rphy_delete(struct sas_rphy *); +extern void sas_rphy_unlink(struct sas_rphy *); extern int scsi_is_sas_rphy(const struct device *); +struct sas_port *sas_port_alloc(struct device *, int); +struct sas_port *sas_port_alloc_num(struct device *); +int sas_port_add(struct sas_port *); +void sas_port_free(struct sas_port *); +void sas_port_delete(struct sas_port *); +void sas_port_add_phy(struct sas_port *, struct sas_phy *); +void sas_port_delete_phy(struct sas_port *, struct sas_phy *); +void sas_port_mark_backlink(struct sas_port *); +int scsi_is_sas_port(const struct device *); +struct sas_phy *sas_port_get_phy(struct sas_port *port); +static inline void sas_port_put_phy(struct sas_phy *phy) +{ + if (phy) + put_device(&phy->dev); +} + extern struct scsi_transport_template * sas_attach_transport(struct sas_function_template *); extern void sas_release_transport(struct scsi_transport_template *); +int sas_read_port_mode_page(struct scsi_device *); + +static inline int +scsi_is_sas_expander_device(struct device *dev) +{ + struct sas_rphy *rphy; + if (!scsi_is_sas_rphy(dev)) + return 0; + rphy = dev_to_rphy(dev); + return rphy->identify.device_type == SAS_FANOUT_EXPANDER_DEVICE || + rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE; +} + +#define scsi_is_sas_phy_local(phy) scsi_is_host_device((phy)->dev.parent) #endif /* SCSI_TRANSPORT_SAS_H */ |