diff options
Diffstat (limited to 'include/media/v4l2-mediabus.h')
| -rw-r--r-- | include/media/v4l2-mediabus.h | 121 |
1 files changed, 68 insertions, 53 deletions
diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h index 8e6559838ae..395c4a95a42 100644 --- a/include/media/v4l2-mediabus.h +++ b/include/media/v4l2-mediabus.h @@ -11,65 +11,80 @@ #ifndef V4L2_MEDIABUS_H #define V4L2_MEDIABUS_H +#include <linux/v4l2-mediabus.h> + +/* Parallel flags */ +/* + * Can the client run in master or in slave mode. By "Master mode" an operation + * mode is meant, when the client (e.g., a camera sensor) is producing + * horizontal and vertical synchronisation. In "Slave mode" the host is + * providing these signals to the slave. + */ +#define V4L2_MBUS_MASTER (1 << 0) +#define V4L2_MBUS_SLAVE (1 << 1) /* - * These pixel codes uniquely identify data formats on the media bus. Mostly - * they correspond to similarly named V4L2_PIX_FMT_* formats, format 0 is - * reserved, V4L2_MBUS_FMT_FIXED shall be used by host-client pairs, where the - * data format is fixed. Additionally, "2X8" means that one pixel is transferred - * in two 8-bit samples, "BE" or "LE" specify in which order those samples are - * transferred over the bus: "LE" means that the least significant bits are - * transferred first, "BE" means that the most significant bits are transferred - * first, and "PADHI" and "PADLO" define which bits - low or high, in the - * incomplete high byte, are filled with padding bits. + * Signal polarity flags + * Note: in BT.656 mode HSYNC, FIELD, and VSYNC are unused + * V4L2_MBUS_[HV]SYNC* flags should be also used for specifying + * configuration of hardware that uses [HV]REF signals + */ +#define V4L2_MBUS_HSYNC_ACTIVE_HIGH (1 << 2) +#define V4L2_MBUS_HSYNC_ACTIVE_LOW (1 << 3) +#define V4L2_MBUS_VSYNC_ACTIVE_HIGH (1 << 4) +#define V4L2_MBUS_VSYNC_ACTIVE_LOW (1 << 5) +#define V4L2_MBUS_PCLK_SAMPLE_RISING (1 << 6) +#define V4L2_MBUS_PCLK_SAMPLE_FALLING (1 << 7) +#define V4L2_MBUS_DATA_ACTIVE_HIGH (1 << 8) +#define V4L2_MBUS_DATA_ACTIVE_LOW (1 << 9) +/* FIELD = 0/1 - Field1 (odd)/Field2 (even) */ +#define V4L2_MBUS_FIELD_EVEN_HIGH (1 << 10) +/* FIELD = 1/0 - Field1 (odd)/Field2 (even) */ +#define V4L2_MBUS_FIELD_EVEN_LOW (1 << 11) +/* Active state of Sync-on-green (SoG) signal, 0/1 for LOW/HIGH respectively. */ +#define V4L2_MBUS_VIDEO_SOG_ACTIVE_HIGH (1 << 12) +#define V4L2_MBUS_VIDEO_SOG_ACTIVE_LOW (1 << 13) + +/* Serial flags */ +/* How many lanes the client can use */ +#define V4L2_MBUS_CSI2_1_LANE (1 << 0) +#define V4L2_MBUS_CSI2_2_LANE (1 << 1) +#define V4L2_MBUS_CSI2_3_LANE (1 << 2) +#define V4L2_MBUS_CSI2_4_LANE (1 << 3) +/* On which channels it can send video data */ +#define V4L2_MBUS_CSI2_CHANNEL_0 (1 << 4) +#define V4L2_MBUS_CSI2_CHANNEL_1 (1 << 5) +#define V4L2_MBUS_CSI2_CHANNEL_2 (1 << 6) +#define V4L2_MBUS_CSI2_CHANNEL_3 (1 << 7) +/* Does it support only continuous or also non-continuous clock mode */ +#define V4L2_MBUS_CSI2_CONTINUOUS_CLOCK (1 << 8) +#define V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK (1 << 9) + +#define V4L2_MBUS_CSI2_LANES (V4L2_MBUS_CSI2_1_LANE | V4L2_MBUS_CSI2_2_LANE | \ + V4L2_MBUS_CSI2_3_LANE | V4L2_MBUS_CSI2_4_LANE) +#define V4L2_MBUS_CSI2_CHANNELS (V4L2_MBUS_CSI2_CHANNEL_0 | V4L2_MBUS_CSI2_CHANNEL_1 | \ + V4L2_MBUS_CSI2_CHANNEL_2 | V4L2_MBUS_CSI2_CHANNEL_3) + +/** + * v4l2_mbus_type - media bus type + * @V4L2_MBUS_PARALLEL: parallel interface with hsync and vsync + * @V4L2_MBUS_BT656: parallel interface with embedded synchronisation, can + * also be used for BT.1120 + * @V4L2_MBUS_CSI2: MIPI CSI-2 serial interface */ -enum v4l2_mbus_pixelcode { - V4L2_MBUS_FMT_FIXED = 1, - V4L2_MBUS_FMT_YUYV8_2X8, - V4L2_MBUS_FMT_YVYU8_2X8, - V4L2_MBUS_FMT_UYVY8_2X8, - V4L2_MBUS_FMT_VYUY8_2X8, - V4L2_MBUS_FMT_YVYU10_2X10, - V4L2_MBUS_FMT_YUYV10_2X10, - V4L2_MBUS_FMT_YVYU10_1X20, - V4L2_MBUS_FMT_YUYV10_1X20, - V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE, - V4L2_MBUS_FMT_RGB444_2X8_PADHI_BE, - V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE, - V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE, - V4L2_MBUS_FMT_RGB565_2X8_LE, - V4L2_MBUS_FMT_RGB565_2X8_BE, - V4L2_MBUS_FMT_BGR565_2X8_LE, - V4L2_MBUS_FMT_BGR565_2X8_BE, - V4L2_MBUS_FMT_SBGGR8_1X8, - V4L2_MBUS_FMT_SBGGR10_1X10, - V4L2_MBUS_FMT_GREY8_1X8, - V4L2_MBUS_FMT_Y10_1X10, - V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE, - V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_LE, - V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_BE, - V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_BE, - V4L2_MBUS_FMT_SGRBG8_1X8, - V4L2_MBUS_FMT_SBGGR12_1X12, - V4L2_MBUS_FMT_YUYV8_1_5X8, - V4L2_MBUS_FMT_YVYU8_1_5X8, - V4L2_MBUS_FMT_UYVY8_1_5X8, - V4L2_MBUS_FMT_VYUY8_1_5X8, +enum v4l2_mbus_type { + V4L2_MBUS_PARALLEL, + V4L2_MBUS_BT656, + V4L2_MBUS_CSI2, }; /** - * struct v4l2_mbus_framefmt - frame format on the media bus - * @width: frame width - * @height: frame height - * @code: data format code - * @field: used interlacing type - * @colorspace: colorspace of the data + * v4l2_mbus_config - media bus configuration + * @type: in: interface type + * @flags: in / out: configuration flags, depending on @type */ -struct v4l2_mbus_framefmt { - __u32 width; - __u32 height; - enum v4l2_mbus_pixelcode code; - enum v4l2_field field; - enum v4l2_colorspace colorspace; +struct v4l2_mbus_config { + enum v4l2_mbus_type type; + unsigned int flags; }; static inline void v4l2_fill_pix_format(struct v4l2_pix_format *pix_fmt, |