diff options
Diffstat (limited to 'include/linux/pm.h')
| -rw-r--r-- | include/linux/pm.h | 524 |
1 files changed, 342 insertions, 182 deletions
diff --git a/include/linux/pm.h b/include/linux/pm.h index 40f3f45702b..72c0fe098a2 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -31,10 +31,22 @@ /* * Callbacks for platform drivers to implement. */ -extern void (*pm_idle)(void); extern void (*pm_power_off)(void); extern void (*pm_power_off_prepare)(void); +struct device; /* we have a circular dep with device.h */ +#ifdef CONFIG_VT_CONSOLE_SLEEP +extern void pm_vt_switch_required(struct device *dev, bool required); +extern void pm_vt_switch_unregister(struct device *dev); +#else +static inline void pm_vt_switch_required(struct device *dev, bool required) +{ +} +static inline void pm_vt_switch_unregister(struct device *dev) +{ +} +#endif /* CONFIG_VT_CONSOLE_SLEEP */ + /* * Device power management */ @@ -54,118 +66,185 @@ typedef struct pm_message { /** * struct dev_pm_ops - device PM callbacks * - * Several driver power state transitions are externally visible, affecting + * Several device power state transitions are externally visible, affecting * the state of pending I/O queues and (for drivers that touch hardware) * interrupts, wakeups, DMA, and other hardware state. There may also be - * internal transitions to various low power modes, which are transparent + * internal transitions to various low-power modes which are transparent * to the rest of the driver stack (such as a driver that's ON gating off * clocks which are not in active use). * - * The externally visible transitions are handled with the help of the following - * callbacks included in this structure: - * - * @prepare: Prepare the device for the upcoming transition, but do NOT change - * its hardware state. Prevent new children of the device from being - * registered after @prepare() returns (the driver's subsystem and - * generally the rest of the kernel is supposed to prevent new calls to the - * probe method from being made too once @prepare() has succeeded). If - * @prepare() detects a situation it cannot handle (e.g. registration of a - * child already in progress), it may return -EAGAIN, so that the PM core - * can execute it once again (e.g. after the new child has been registered) - * to recover from the race condition. This method is executed for all - * kinds of suspend transitions and is followed by one of the suspend - * callbacks: @suspend(), @freeze(), or @poweroff(). - * The PM core executes @prepare() for all devices before starting to - * execute suspend callbacks for any of them, so drivers may assume all of - * the other devices to be present and functional while @prepare() is being - * executed. In particular, it is safe to make GFP_KERNEL memory - * allocations from within @prepare(). However, drivers may NOT assume - * anything about the availability of the user space at that time and it - * is not correct to request firmware from within @prepare() (it's too - * late to do that). [To work around this limitation, drivers may - * register suspend and hibernation notifiers that are executed before the - * freezing of tasks.] + * The externally visible transitions are handled with the help of callbacks + * included in this structure in such a way that two levels of callbacks are + * involved. First, the PM core executes callbacks provided by PM domains, + * device types, classes and bus types. They are the subsystem-level callbacks + * supposed to execute callbacks provided by device drivers, although they may + * choose not to do that. If the driver callbacks are executed, they have to + * collaborate with the subsystem-level callbacks to achieve the goals + * appropriate for the given system transition, given transition phase and the + * subsystem the device belongs to. + * + * @prepare: The principal role of this callback is to prevent new children of + * the device from being registered after it has returned (the driver's + * subsystem and generally the rest of the kernel is supposed to prevent + * new calls to the probe method from being made too once @prepare() has + * succeeded). If @prepare() detects a situation it cannot handle (e.g. + * registration of a child already in progress), it may return -EAGAIN, so + * that the PM core can execute it once again (e.g. after a new child has + * been registered) to recover from the race condition. + * This method is executed for all kinds of suspend transitions and is + * followed by one of the suspend callbacks: @suspend(), @freeze(), or + * @poweroff(). If the transition is a suspend to memory or standby (that + * is, not related to hibernation), the return value of @prepare() may be + * used to indicate to the PM core to leave the device in runtime suspend + * if applicable. Namely, if @prepare() returns a positive number, the PM + * core will understand that as a declaration that the device appears to be + * runtime-suspended and it may be left in that state during the entire + * transition and during the subsequent resume if all of its descendants + * are left in runtime suspend too. If that happens, @complete() will be + * executed directly after @prepare() and it must ensure the proper + * functioning of the device after the system resume. + * The PM core executes subsystem-level @prepare() for all devices before + * starting to invoke suspend callbacks for any of them, so generally + * devices may be assumed to be functional or to respond to runtime resume + * requests while @prepare() is being executed. However, device drivers + * may NOT assume anything about the availability of user space at that + * time and it is NOT valid to request firmware from within @prepare() + * (it's too late to do that). It also is NOT valid to allocate + * substantial amounts of memory from @prepare() in the GFP_KERNEL mode. + * [To work around these limitations, drivers may register suspend and + * hibernation notifiers to be executed before the freezing of tasks.] * * @complete: Undo the changes made by @prepare(). This method is executed for * all kinds of resume transitions, following one of the resume callbacks: * @resume(), @thaw(), @restore(). Also called if the state transition - * fails before the driver's suspend callback (@suspend(), @freeze(), - * @poweroff()) can be executed (e.g. if the suspend callback fails for one + * fails before the driver's suspend callback: @suspend(), @freeze() or + * @poweroff(), can be executed (e.g. if the suspend callback fails for one * of the other devices that the PM core has unsuccessfully attempted to * suspend earlier). - * The PM core executes @complete() after it has executed the appropriate - * resume callback for all devices. + * The PM core executes subsystem-level @complete() after it has executed + * the appropriate resume callbacks for all devices. If the corresponding + * @prepare() at the beginning of the suspend transition returned a + * positive number and the device was left in runtime suspend (without + * executing any suspend and resume callbacks for it), @complete() will be + * the only callback executed for the device during resume. In that case, + * @complete() must be prepared to do whatever is necessary to ensure the + * proper functioning of the device after the system resume. To this end, + * @complete() can check the power.direct_complete flag of the device to + * learn whether (unset) or not (set) the previous suspend and resume + * callbacks have been executed for it. * * @suspend: Executed before putting the system into a sleep state in which the - * contents of main memory are preserved. Quiesce the device, put it into - * a low power state appropriate for the upcoming system state (such as - * PCI_D3hot), and enable wakeup events as appropriate. + * contents of main memory are preserved. The exact action to perform + * depends on the device's subsystem (PM domain, device type, class or bus + * type), but generally the device must be quiescent after subsystem-level + * @suspend() has returned, so that it doesn't do any I/O or DMA. + * Subsystem-level @suspend() is executed for all devices after invoking + * subsystem-level @prepare() for all of them. + * + * @suspend_late: Continue operations started by @suspend(). For a number of + * devices @suspend_late() may point to the same callback routine as the + * runtime suspend callback. * * @resume: Executed after waking the system up from a sleep state in which the - * contents of main memory were preserved. Put the device into the - * appropriate state, according to the information saved in memory by the - * preceding @suspend(). The driver starts working again, responding to - * hardware events and software requests. The hardware may have gone - * through a power-off reset, or it may have maintained state from the - * previous suspend() which the driver may rely on while resuming. On most - * platforms, there are no restrictions on availability of resources like - * clocks during @resume(). + * contents of main memory were preserved. The exact action to perform + * depends on the device's subsystem, but generally the driver is expected + * to start working again, responding to hardware events and software + * requests (the device itself may be left in a low-power state, waiting + * for a runtime resume to occur). The state of the device at the time its + * driver's @resume() callback is run depends on the platform and subsystem + * the device belongs to. On most platforms, there are no restrictions on + * availability of resources like clocks during @resume(). + * Subsystem-level @resume() is executed for all devices after invoking + * subsystem-level @resume_noirq() for all of them. + * + * @resume_early: Prepare to execute @resume(). For a number of devices + * @resume_early() may point to the same callback routine as the runtime + * resume callback. * * @freeze: Hibernation-specific, executed before creating a hibernation image. - * Quiesce operations so that a consistent image can be created, but do NOT - * otherwise put the device into a low power device state and do NOT emit - * system wakeup events. Save in main memory the device settings to be - * used by @restore() during the subsequent resume from hibernation or by - * the subsequent @thaw(), if the creation of the image or the restoration - * of main memory contents from it fails. + * Analogous to @suspend(), but it should not enable the device to signal + * wakeup events or change its power state. The majority of subsystems + * (with the notable exception of the PCI bus type) expect the driver-level + * @freeze() to save the device settings in memory to be used by @restore() + * during the subsequent resume from hibernation. + * Subsystem-level @freeze() is executed for all devices after invoking + * subsystem-level @prepare() for all of them. + * + * @freeze_late: Continue operations started by @freeze(). Analogous to + * @suspend_late(), but it should not enable the device to signal wakeup + * events or change its power state. * * @thaw: Hibernation-specific, executed after creating a hibernation image OR - * if the creation of the image fails. Also executed after a failing + * if the creation of an image has failed. Also executed after a failing * attempt to restore the contents of main memory from such an image. * Undo the changes made by the preceding @freeze(), so the device can be * operated in the same way as immediately before the call to @freeze(). + * Subsystem-level @thaw() is executed for all devices after invoking + * subsystem-level @thaw_noirq() for all of them. It also may be executed + * directly after @freeze() in case of a transition error. * - * @poweroff: Hibernation-specific, executed after saving a hibernation image. - * Quiesce the device, put it into a low power state appropriate for the - * upcoming system state (such as PCI_D3hot), and enable wakeup events as - * appropriate. - * - * @restore: Hibernation-specific, executed after restoring the contents of main - * memory from a hibernation image. Driver starts working again, - * responding to hardware events and software requests. Drivers may NOT - * make ANY assumptions about the hardware state right prior to @restore(). - * On most platforms, there are no restrictions on availability of - * resources like clocks during @restore(). - * - * @suspend_noirq: Complete the operations of ->suspend() by carrying out any - * actions required for suspending the device that need interrupts to be - * disabled - * - * @resume_noirq: Prepare for the execution of ->resume() by carrying out any - * actions required for resuming the device that need interrupts to be - * disabled + * @thaw_early: Prepare to execute @thaw(). Undo the changes made by the + * preceding @freeze_late(). * - * @freeze_noirq: Complete the operations of ->freeze() by carrying out any - * actions required for freezing the device that need interrupts to be - * disabled - * - * @thaw_noirq: Prepare for the execution of ->thaw() by carrying out any - * actions required for thawing the device that need interrupts to be - * disabled + * @poweroff: Hibernation-specific, executed after saving a hibernation image. + * Analogous to @suspend(), but it need not save the device's settings in + * memory. + * Subsystem-level @poweroff() is executed for all devices after invoking + * subsystem-level @prepare() for all of them. * - * @poweroff_noirq: Complete the operations of ->poweroff() by carrying out any - * actions required for handling the device that need interrupts to be - * disabled + * @poweroff_late: Continue operations started by @poweroff(). Analogous to + * @suspend_late(), but it need not save the device's settings in memory. * - * @restore_noirq: Prepare for the execution of ->restore() by carrying out any - * actions required for restoring the operations of the device that need - * interrupts to be disabled + * @restore: Hibernation-specific, executed after restoring the contents of main + * memory from a hibernation image, analogous to @resume(). + * + * @restore_early: Prepare to execute @restore(), analogous to @resume_early(). + * + * @suspend_noirq: Complete the actions started by @suspend(). Carry out any + * additional operations required for suspending the device that might be + * racing with its driver's interrupt handler, which is guaranteed not to + * run while @suspend_noirq() is being executed. + * It generally is expected that the device will be in a low-power state + * (appropriate for the target system sleep state) after subsystem-level + * @suspend_noirq() has returned successfully. If the device can generate + * system wakeup signals and is enabled to wake up the system, it should be + * configured to do so at that time. However, depending on the platform + * and device's subsystem, @suspend() or @suspend_late() may be allowed to + * put the device into the low-power state and configure it to generate + * wakeup signals, in which case it generally is not necessary to define + * @suspend_noirq(). + * + * @resume_noirq: Prepare for the execution of @resume() by carrying out any + * operations required for resuming the device that might be racing with + * its driver's interrupt handler, which is guaranteed not to run while + * @resume_noirq() is being executed. + * + * @freeze_noirq: Complete the actions started by @freeze(). Carry out any + * additional operations required for freezing the device that might be + * racing with its driver's interrupt handler, which is guaranteed not to + * run while @freeze_noirq() is being executed. + * The power state of the device should not be changed by either @freeze(), + * or @freeze_late(), or @freeze_noirq() and it should not be configured to + * signal system wakeup by any of these callbacks. + * + * @thaw_noirq: Prepare for the execution of @thaw() by carrying out any + * operations required for thawing the device that might be racing with its + * driver's interrupt handler, which is guaranteed not to run while + * @thaw_noirq() is being executed. + * + * @poweroff_noirq: Complete the actions started by @poweroff(). Analogous to + * @suspend_noirq(), but it need not save the device's settings in memory. + * + * @restore_noirq: Prepare for the execution of @restore() by carrying out any + * operations required for thawing the device that might be racing with its + * driver's interrupt handler, which is guaranteed not to run while + * @restore_noirq() is being executed. Analogous to @resume_noirq(). * * All of the above callbacks, except for @complete(), return error codes. * However, the error codes returned by the resume operations, @resume(), - * @thaw(), @restore(), @resume_noirq(), @thaw_noirq(), and @restore_noirq() do + * @thaw(), @restore(), @resume_noirq(), @thaw_noirq(), and @restore_noirq(), do * not cause the PM core to abort the resume transition during which they are - * returned. The error codes returned in that cases are only printed by the PM + * returned. The error codes returned in those cases are only printed by the PM * core to the system logs for debugging purposes. Still, it is recommended * that drivers only return error codes from their resume methods in case of an * unrecoverable failure (i.e. when the device being handled refuses to resume @@ -174,31 +253,43 @@ typedef struct pm_message { * their children. * * It is allowed to unregister devices while the above callbacks are being - * executed. However, it is not allowed to unregister a device from within any - * of its own callbacks. + * executed. However, a callback routine must NOT try to unregister the device + * it was called for, although it may unregister children of that device (for + * example, if it detects that a child was unplugged while the system was + * asleep). + * + * Refer to Documentation/power/devices.txt for more information about the role + * of the above callbacks in the system suspend process. * - * There also are the following callbacks related to run-time power management - * of devices: + * There also are callbacks related to runtime power management of devices. + * Again, these callbacks are executed by the PM core only for subsystems + * (PM domains, device types, classes and bus types) and the subsystem-level + * callbacks are supposed to invoke the driver callbacks. Moreover, the exact + * actions to be performed by a device driver's callbacks generally depend on + * the platform and subsystem the device belongs to. * * @runtime_suspend: Prepare the device for a condition in which it won't be * able to communicate with the CPU(s) and RAM due to power management. - * This need not mean that the device should be put into a low power state. + * This need not mean that the device should be put into a low-power state. * For example, if the device is behind a link which is about to be turned * off, the device may remain at full power. If the device does go to low - * power and is capable of generating run-time wake-up events, remote - * wake-up (i.e., a hardware mechanism allowing the device to request a - * change of its power state via a wake-up event, such as PCI PME) should - * be enabled for it. + * power and is capable of generating runtime wakeup events, remote wakeup + * (i.e., a hardware mechanism allowing the device to request a change of + * its power state via an interrupt) should be enabled for it. * * @runtime_resume: Put the device into the fully active state in response to a - * wake-up event generated by hardware or at the request of software. If - * necessary, put the device into the full power state and restore its + * wakeup event generated by hardware or at the request of software. If + * necessary, put the device into the full-power state and restore its * registers, so that it is fully operational. * - * @runtime_idle: Device appears to be inactive and it might be put into a low - * power state if all of the necessary conditions are satisfied. Check - * these conditions and handle the device as appropriate, possibly queueing - * a suspend request for it. The return value is ignored by the PM core. + * @runtime_idle: Device appears to be inactive and it might be put into a + * low-power state if all of the necessary conditions are satisfied. + * Check these conditions, and return 0 if it's appropriate to let the PM + * core queue a suspend request for the device. + * + * Refer to Documentation/power/runtime_pm.txt for more information about the + * role of the above callbacks in device runtime power management. + * */ struct dev_pm_ops { @@ -210,6 +301,12 @@ struct dev_pm_ops { int (*thaw)(struct device *dev); int (*poweroff)(struct device *dev); int (*restore)(struct device *dev); + int (*suspend_late)(struct device *dev); + int (*resume_early)(struct device *dev); + int (*freeze_late)(struct device *dev); + int (*thaw_early)(struct device *dev); + int (*poweroff_late)(struct device *dev); + int (*restore_early)(struct device *dev); int (*suspend_noirq)(struct device *dev); int (*resume_noirq)(struct device *dev); int (*freeze_noirq)(struct device *dev); @@ -233,6 +330,18 @@ struct dev_pm_ops { #define SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) #endif +#ifdef CONFIG_PM_SLEEP +#define SET_LATE_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \ + .suspend_late = suspend_fn, \ + .resume_early = resume_fn, \ + .freeze_late = suspend_fn, \ + .thaw_early = resume_fn, \ + .poweroff_late = suspend_fn, \ + .restore_early = resume_fn, +#else +#define SET_LATE_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) +#endif + #ifdef CONFIG_PM_RUNTIME #define SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \ .runtime_suspend = suspend_fn, \ @@ -242,6 +351,15 @@ struct dev_pm_ops { #define SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) #endif +#ifdef CONFIG_PM +#define SET_PM_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \ + .runtime_suspend = suspend_fn, \ + .runtime_resume = resume_fn, \ + .runtime_idle = idle_fn, +#else +#define SET_PM_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) +#endif + /* * Use this if you want to use the same suspend and resume callbacks for suspend * to RAM and hibernation. @@ -253,7 +371,16 @@ const struct dev_pm_ops name = { \ /* * Use this for defining a set of PM operations to be used in all situations - * (sustem suspend, hibernation or runtime PM). + * (system suspend, hibernation or runtime PM). + * NOTE: In general, system suspend callbacks, .suspend() and .resume(), should + * be different from the corresponding runtime PM callbacks, .runtime_suspend(), + * and .runtime_resume(), because .runtime_suspend() always works on an already + * quiescent device, while .suspend() should assume that the device may be doing + * something when it is called (it should ensure that the device will be + * quiescent after it has returned). Therefore it's better to point the "late" + * suspend and "early" resume callback pointers, .suspend_late() and + * .resume_early(), to the same routines as .runtime_suspend() and + * .runtime_resume(), respectively (and analogously for hibernation). */ #define UNIVERSAL_DEV_PM_OPS(name, suspend_fn, resume_fn, idle_fn) \ const struct dev_pm_ops name = { \ @@ -261,19 +388,6 @@ const struct dev_pm_ops name = { \ SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \ } -/* - * Use this for subsystems (bus types, device types, device classes) that don't - * need any special suspend/resume handling in addition to invoking the PM - * callbacks provided by device drivers supporting both the system sleep PM and - * runtime PM, make the pm member point to generic_subsys_pm_ops. - */ -#ifdef CONFIG_PM_OPS -extern struct dev_pm_ops generic_subsys_pm_ops; -#define GENERIC_SUBSYS_PM_OPS (&generic_subsys_pm_ops) -#else -#define GENERIC_SUBSYS_PM_OPS NULL -#endif - /** * PM_EVENT_ messages * @@ -284,7 +398,7 @@ extern struct dev_pm_ops generic_subsys_pm_ops; * * ON No transition. * - * FREEZE System is going to hibernate, call ->prepare() and ->freeze() + * FREEZE System is going to hibernate, call ->prepare() and ->freeze() * for all devices. * * SUSPEND System is going to suspend, call ->prepare() and ->suspend() @@ -326,8 +440,9 @@ extern struct dev_pm_ops generic_subsys_pm_ops; * requested by a driver. */ +#define PM_EVENT_INVALID (-1) #define PM_EVENT_ON 0x0000 -#define PM_EVENT_FREEZE 0x0001 +#define PM_EVENT_FREEZE 0x0001 #define PM_EVENT_SUSPEND 0x0002 #define PM_EVENT_HIBERNATE 0x0004 #define PM_EVENT_QUIESCE 0x0008 @@ -346,6 +461,7 @@ extern struct dev_pm_ops generic_subsys_pm_ops; #define PM_EVENT_AUTO_SUSPEND (PM_EVENT_AUTO | PM_EVENT_SUSPEND) #define PM_EVENT_AUTO_RESUME (PM_EVENT_AUTO | PM_EVENT_RESUME) +#define PMSG_INVALID ((struct pm_message){ .event = PM_EVENT_INVALID, }) #define PMSG_ON ((struct pm_message){ .event = PM_EVENT_ON, }) #define PMSG_FREEZE ((struct pm_message){ .event = PM_EVENT_FREEZE, }) #define PMSG_QUIESCE ((struct pm_message){ .event = PM_EVENT_QUIESCE, }) @@ -366,44 +482,7 @@ extern struct dev_pm_ops generic_subsys_pm_ops; #define PMSG_AUTO_RESUME ((struct pm_message) \ { .event = PM_EVENT_AUTO_RESUME, }) -/** - * Device power management states - * - * These state labels are used internally by the PM core to indicate the current - * status of a device with respect to the PM core operations. - * - * DPM_ON Device is regarded as operational. Set this way - * initially and when ->complete() is about to be called. - * Also set when ->prepare() fails. - * - * DPM_PREPARING Device is going to be prepared for a PM transition. Set - * when ->prepare() is about to be called. - * - * DPM_RESUMING Device is going to be resumed. Set when ->resume(), - * ->thaw(), or ->restore() is about to be called. - * - * DPM_SUSPENDING Device has been prepared for a power transition. Set - * when ->prepare() has just succeeded. - * - * DPM_OFF Device is regarded as inactive. Set immediately after - * ->suspend(), ->freeze(), or ->poweroff() has succeeded. - * Also set when ->resume()_noirq, ->thaw_noirq(), or - * ->restore_noirq() is about to be called. - * - * DPM_OFF_IRQ Device is in a "deep sleep". Set immediately after - * ->suspend_noirq(), ->freeze_noirq(), or - * ->poweroff_noirq() has just succeeded. - */ - -enum dpm_state { - DPM_INVALID, - DPM_ON, - DPM_PREPARING, - DPM_RESUMING, - DPM_SUSPENDING, - DPM_OFF, - DPM_OFF_IRQ, -}; +#define PMSG_IS_AUTO(msg) (((msg).event & PM_EVENT_AUTO) != 0) /** * Device run-time power management status. @@ -460,16 +539,42 @@ enum rpm_request { struct wakeup_source; +struct pm_domain_data { + struct list_head list_node; + struct device *dev; +}; + +struct pm_subsys_data { + spinlock_t lock; + unsigned int refcount; +#ifdef CONFIG_PM_CLK + struct list_head clock_list; +#endif +#ifdef CONFIG_PM_GENERIC_DOMAINS + struct pm_domain_data *domain_data; +#endif +}; + struct dev_pm_info { pm_message_t power_state; unsigned int can_wakeup:1; - unsigned async_suspend:1; - enum dpm_state status; /* Owned by the PM core */ + unsigned int async_suspend:1; + bool is_prepared:1; /* Owned by the PM core */ + bool is_suspended:1; /* Ditto */ + bool is_noirq_suspended:1; + bool is_late_suspended:1; + bool ignore_children:1; + bool early_init:1; /* Owned by the PM core */ + bool direct_complete:1; /* Owned by the PM core */ spinlock_t lock; #ifdef CONFIG_PM_SLEEP struct list_head entry; struct completion completion; struct wakeup_source *wakeup; + bool wakeup_path:1; + bool syscore:1; +#else + unsigned int should_wakeup:1; #endif #ifdef CONFIG_PM_RUNTIME struct timer_list suspend_timer; @@ -479,15 +584,16 @@ struct dev_pm_info { atomic_t usage_count; atomic_t child_count; unsigned int disable_depth:3; - unsigned int ignore_children:1; unsigned int idle_notification:1; unsigned int request_pending:1; unsigned int deferred_resume:1; unsigned int run_wake:1; unsigned int runtime_auto:1; unsigned int no_callbacks:1; + unsigned int irq_safe:1; unsigned int use_autosuspend:1; unsigned int timer_autosuspends:1; + unsigned int memalloc_noio:1; enum rpm_request request; enum rpm_status runtime_status; int runtime_error; @@ -497,10 +603,23 @@ struct dev_pm_info { unsigned long suspended_jiffies; unsigned long accounting_timestamp; #endif + struct pm_subsys_data *subsys_data; /* Owned by the subsystem. */ + void (*set_latency_tolerance)(struct device *, s32); + struct dev_pm_qos *qos; }; extern void update_pm_runtime_accounting(struct device *dev); +extern int dev_pm_get_subsys_data(struct device *dev); +extern int dev_pm_put_subsys_data(struct device *dev); +/* + * Power domains provide callbacks that are executed during system suspend, + * hibernation, system resume and during runtime PM transitions along with + * subsystem-level and driver-level callbacks. + */ +struct dev_pm_domain { + struct dev_pm_ops ops; +}; /* * The PM_EVENT_ messages are also used by drivers implementing the legacy @@ -516,11 +635,11 @@ extern void update_pm_runtime_accounting(struct device *dev); * message is implicit: * * ON Driver starts working again, responding to hardware events - * and software requests. The hardware may have gone through - * a power-off reset, or it may have maintained state from the - * previous suspend() which the driver will rely on while - * resuming. On most platforms, there are no restrictions on - * availability of resources like clocks during resume(). + * and software requests. The hardware may have gone through + * a power-off reset, or it may have maintained state from the + * previous suspend() which the driver will rely on while + * resuming. On most platforms, there are no restrictions on + * availability of resources like clocks during resume(). * * Other transitions are triggered by messages sent using suspend(). All * these transitions quiesce the driver, so that I/O queues are inactive. @@ -530,21 +649,21 @@ extern void update_pm_runtime_accounting(struct device *dev); * differ according to the message: * * SUSPEND Quiesce, enter a low power device state appropriate for - * the upcoming system state (such as PCI_D3hot), and enable - * wakeup events as appropriate. + * the upcoming system state (such as PCI_D3hot), and enable + * wakeup events as appropriate. * * HIBERNATE Enter a low power device state appropriate for the hibernation - * state (eg. ACPI S4) and enable wakeup events as appropriate. + * state (eg. ACPI S4) and enable wakeup events as appropriate. * * FREEZE Quiesce operations so that a consistent image can be saved; - * but do NOT otherwise enter a low power device state, and do - * NOT emit system wakeup events. + * but do NOT otherwise enter a low power device state, and do + * NOT emit system wakeup events. * * PRETHAW Quiesce as if for FREEZE; additionally, prepare for restoring - * the system from a snapshot taken after an earlier FREEZE. - * Some drivers will need to reset their hardware state instead - * of preserving it, to ensure that it's never mistaken for the - * state which that earlier snapshot had set up. + * the system from a snapshot taken after an earlier FREEZE. + * Some drivers will need to reset their hardware state instead + * of preserving it, to ensure that it's never mistaken for the + * state which that earlier snapshot had set up. * * A minimally power-aware driver treats all messages as SUSPEND, fully * reinitializes its device during resume() -- whether or not it was reset @@ -558,14 +677,16 @@ extern void update_pm_runtime_accounting(struct device *dev); #ifdef CONFIG_PM_SLEEP extern void device_pm_lock(void); -extern int sysdev_resume(void); -extern void dpm_resume_noirq(pm_message_t state); +extern void dpm_resume_start(pm_message_t state); extern void dpm_resume_end(pm_message_t state); +extern void dpm_resume(pm_message_t state); +extern void dpm_complete(pm_message_t state); extern void device_pm_unlock(void); -extern int sysdev_suspend(pm_message_t state); -extern int dpm_suspend_noirq(pm_message_t state); +extern int dpm_suspend_end(pm_message_t state); extern int dpm_suspend_start(pm_message_t state); +extern int dpm_suspend(pm_message_t state); +extern int dpm_prepare(pm_message_t state); extern void __suspend_report_result(const char *function, void *fn, int ret); @@ -575,6 +696,29 @@ extern void __suspend_report_result(const char *function, void *fn, int ret); } while (0) extern int device_pm_wait_for_dev(struct device *sub, struct device *dev); +extern void dpm_for_each_dev(void *data, void (*fn)(struct device *, void *)); + +extern int pm_generic_prepare(struct device *dev); +extern int pm_generic_suspend_late(struct device *dev); +extern int pm_generic_suspend_noirq(struct device *dev); +extern int pm_generic_suspend(struct device *dev); +extern int pm_generic_resume_early(struct device *dev); +extern int pm_generic_resume_noirq(struct device *dev); +extern int pm_generic_resume(struct device *dev); +extern int pm_generic_freeze_noirq(struct device *dev); +extern int pm_generic_freeze_late(struct device *dev); +extern int pm_generic_freeze(struct device *dev); +extern int pm_generic_thaw_noirq(struct device *dev); +extern int pm_generic_thaw_early(struct device *dev); +extern int pm_generic_thaw(struct device *dev); +extern int pm_generic_restore_noirq(struct device *dev); +extern int pm_generic_restore_early(struct device *dev); +extern int pm_generic_restore(struct device *dev); +extern int pm_generic_poweroff_noirq(struct device *dev); +extern int pm_generic_poweroff_late(struct device *dev); +extern int pm_generic_poweroff(struct device *dev); +extern void pm_generic_complete(struct device *dev); + #else /* !CONFIG_PM_SLEEP */ #define device_pm_lock() do {} while (0) @@ -591,6 +735,31 @@ static inline int device_pm_wait_for_dev(struct device *a, struct device *b) { return 0; } + +static inline void dpm_for_each_dev(void *data, void (*fn)(struct device *, void *)) +{ +} + +#define pm_generic_prepare NULL +#define pm_generic_suspend_late NULL +#define pm_generic_suspend_noirq NULL +#define pm_generic_suspend NULL +#define pm_generic_resume_early NULL +#define pm_generic_resume_noirq NULL +#define pm_generic_resume NULL +#define pm_generic_freeze_noirq NULL +#define pm_generic_freeze_late NULL +#define pm_generic_freeze NULL +#define pm_generic_thaw_noirq NULL +#define pm_generic_thaw_early NULL +#define pm_generic_thaw NULL +#define pm_generic_restore_noirq NULL +#define pm_generic_restore_early NULL +#define pm_generic_restore NULL +#define pm_generic_poweroff_noirq NULL +#define pm_generic_poweroff_late NULL +#define pm_generic_poweroff NULL +#define pm_generic_complete NULL #endif /* !CONFIG_PM_SLEEP */ /* How to reorder dpm_list after device_move() */ @@ -601,13 +770,4 @@ enum dpm_order { DPM_ORDER_DEV_LAST, }; -/* - * Global Power Management flags - * Used to keep APM and ACPI from both being active - */ -extern unsigned int pm_flags; - -#define PM_APM 1 -#define PM_ACPI 2 - #endif /* _LINUX_PM_H */ |