Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull more networking updates from David Miller: "Ok, everything from here on out will be bug fixes." 1) One final sync of wireless and bluetooth stuff from John Linville. These changes have all been in his tree for more than a week, and therefore have had the necessary -next exposure. John was just away on a trip and didn't have a change to send the pull request until a day or two ago. 2) Put back some defines in user exposed header file areas that were removed during the tokenring purge. From Stephen Hemminger and Paul Gortmaker. 3) A bug fix for UDP hash table allocation got lost in the pile due to one of those "you got it.. no I've got it.." situations. :-) From Tim Bird. 4) SKB coalescing in TCP needs to have stricter checks, otherwise we'll try to coalesce overlapping frags and crash. Fix from Eric Dumazet. 5) RCU routing table lookups can race with free_fib_info(), causing crashes when we deref the device pointers in the route. Fix by releasing the net device in the RCU callback. From Yanmin Zhang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (293 commits) tcp: take care of overlaps in tcp_try_coalesce() ipv4: fix the rcu race between free_fib_info and ip_route_output_slow mm: add a low limit to alloc_large_system_hash ipx: restore token ring define to include/linux/ipx.h if: restore token ring ARP type to header xen: do not disable netfront in dom0 phy/micrel: Fix ID of KSZ9021 mISDN: Add X-Tensions USB ISDN TA XC-525 gianfar:don't add FCB length to hard_header_len Bluetooth: Report proper error number in disconnection Bluetooth: Create flags for bt_sk() Bluetooth: report the right security level in getsockopt Bluetooth: Lock the L2CAP channel when sending Bluetooth: Restore locking semantics when looking up L2CAP channels Bluetooth: Fix a redundant and problematic incoming MTU check Bluetooth: Add support for Foxconn/Hon Hai AR5BBU22 0489:E03C Bluetooth: Fix EIR data generation for mgmt_device_found Bluetooth: Fix Inquiry with RSSI event mask Bluetooth: improve readability of l2cap_seq_list code Bluetooth: Fix skb length calculation ...
0 files changed, 0 insertions, 0 deletions
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index c59f6e59fc1..50d82ae09e2 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -541,6 +541,18 @@ Who:	Kees Cook <keescook@chromium.org>
 
 ----------------------------
 
+What:	Removing the pn544 raw driver.
+When:	3.6
+Why:	With the introduction of the NFC HCI and SHDL kernel layers, pn544.c
+	is being replaced by pn544_hci.c which is accessible through the netlink
+	and socket NFC APIs. Moreover, pn544.c is outdated and does not seem to
+	work properly with the latest Android stacks.
+	Having 2 drivers for the same hardware is confusing and as such we
+	should only keep the one following the kernel NFC APIs.
+Who:	Samuel Ortiz <sameo@linux.intel.com>
+
+----------------------------
+
 What:	setitimer accepts user NULL pointer (value)
 When:	3.6
 Why:	setitimer is not returning -EFAULT if user pointer is NULL. This
diff --git a/Documentation/nfc/nfc-hci.txt b/Documentation/nfc/nfc-hci.txt
index 216b7254fcc..320f9336c78 100644
--- a/Documentation/nfc/nfc-hci.txt
+++ b/Documentation/nfc/nfc-hci.txt
@@ -22,9 +22,9 @@ response to arrive.
 HCI events can also be received from the host controller. They will be handled
 and a translation will be forwarded to NFC Core as needed.
 HCI uses 2 execution contexts:
-- one if for executing commands : nfc_hci_msg_tx_work(). Only one command
+- one for executing commands : nfc_hci_msg_tx_work(). Only one command
 can be executing at any given moment.
-- one if for dispatching received events and responses : nfc_hci_msg_rx_work()
+- one for dispatching received events and commands : nfc_hci_msg_rx_work().
 
 HCI Session initialization:
 ---------------------------
@@ -52,18 +52,42 @@ entry points:
 struct nfc_hci_ops {
 	int (*open)(struct nfc_hci_dev *hdev);
 	void (*close)(struct nfc_hci_dev *hdev);
+	int (*hci_ready) (struct nfc_hci_dev *hdev);
 	int (*xmit)(struct nfc_hci_dev *hdev, struct sk_buff *skb);
 	int (*start_poll)(struct nfc_hci_dev *hdev, u32 protocols);
 	int (*target_from_gate)(struct nfc_hci_dev *hdev, u8 gate,
 				struct nfc_target *target);
+	int (*complete_target_discovered) (struct nfc_hci_dev *hdev, u8 gate,
+					   struct nfc_target *target);
+	int (*data_exchange) (struct nfc_hci_dev *hdev,
+			      struct nfc_target *target,
+			      struct sk_buff *skb, struct sk_buff **res_skb);
+	int (*check_presence)(struct nfc_hci_dev *hdev,
+			      struct nfc_target *target);
 };
 
-open() and close() shall turn the hardware on and off. xmit() shall simply
-write a frame to the chip. start_poll() is an optional entrypoint that shall
-set the hardware in polling mode. This must be implemented only if the hardware
-uses proprietary gates or a mechanism slightly different from the HCI standard.
-target_from_gate() is another optional entrypoint to return the protocols
+- open() and close() shall turn the hardware on and off.
+- hci_ready() is an optional entry point that is called right after the hci
+session has been set up. The driver can use it to do additional initialization
+that must be performed using HCI commands.
+- xmit() shall simply write a frame to the chip.
+- start_poll() is an optional entrypoint that shall set the hardware in polling
+mode. This must be implemented only if the hardware uses proprietary gates or a
+mechanism slightly different from the HCI standard.
+- target_from_gate() is an optional entrypoint to return the nfc protocols
 corresponding to a proprietary gate.
+- complete_target_discovered() is an optional entry point to let the driver
+perform additional proprietary processing necessary to auto activate the
+discovered target.
+- data_exchange() must be implemented by the driver if proprietary HCI commands
+are required to send data to the tag. Some tag types will require custom
+commands, others can be written to using the standard HCI commands. The driver
+can check the tag type and either do proprietary processing, or return 1 to ask
+for standard processing.
+- check_presence() is an optional entry point that will be called regularly
+by the core to check that an activated tag is still in the field. If this is
+not implemented, the core will not be able to push tag_lost events to the user
+space
 
 On the rx path, the driver is responsible to push incoming HCP frames to HCI
 using nfc_hci_recv_frame(). HCI will take care of re-aggregation and handling
@@ -99,7 +123,8 @@ fast, cannot sleep. stores incoming frames into an shdlc rx queue
 handles shdlc rx & tx queues. Dispatches HCI cmd responses.
 
 - HCI Tx Cmd worker (MSGTXWQ)
-Serialize execution of HCI commands. Complete execution in case of resp timeout.
+Serializes execution of HCI commands. Completes execution in case of response
+timeout.
 
 - HCI Rx worker (MSGRXWQ)
 Dispatches incoming HCI commands or events.
@@ -133,11 +158,11 @@ able to complete the command with a timeout error if no response arrive.
 SMW context gets scheduled and invokes nfc_shdlc_sm_work(). This function
 handles shdlc framing in and out. It uses the driver xmit to send frames and
 receives incoming frames in an skb queue filled from the driver IRQ handler.
-SHDLC I(nformation) frames payload are HCP fragments. They are agregated to
+SHDLC I(nformation) frames payload are HCP fragments. They are aggregated to
 form complete HCI frames, which can be a response, command, or event.
 
 HCI Responses are dispatched immediately from this context to unblock
-waiting command execution. Reponse processing involves invoking the completion
+waiting command execution. Response processing involves invoking the completion
 callback that was provided by nfc_hci_msg_tx_work() when it sent the command.
 The completion callback will then wake the syscall context.
 
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index 19780aa9170..95bf4d7bac2 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -90,6 +90,7 @@ static int bcm47xx_get_sprom_ssb(struct ssb_bus *bus, struct ssb_sprom *out)
 	char prefix[10];
 
 	if (bus->bustype == SSB_BUSTYPE_PCI) {
+		memset(out, 0, sizeof(struct ssb_sprom));
 		snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
 			 bus->host_pci->bus->number + 1,
 			 PCI_SLOT(bus->host_pci->devfn));
@@ -109,15 +110,9 @@ static int bcm47xx_get_invariants(struct ssb_bus *bus,
 	/* Fill boardinfo structure */
 	memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
 
-	if (nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
-		iv->boardinfo.vendor = (u16)simple_strtoul(buf, NULL, 0);
-	else
-		iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM;
-	if (nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
-		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
-	if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
-		iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
+	bcm47xx_fill_ssb_boardinfo(&iv->boardinfo, NULL);
 
+	memset(&iv->sprom, 0, sizeof(struct ssb_sprom));
 	bcm47xx_fill_sprom(&iv->sprom, NULL);
 
 	if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
@@ -166,12 +161,14 @@ static int bcm47xx_get_sprom_bcma(struct bcma_bus *bus, struct ssb_sprom *out)
 
 	switch (bus->hosttype) {
 	case BCMA_HOSTTYPE_PCI:
+		memset(out, 0, sizeof(struct ssb_sprom));
 		snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
 			 bus->host_pci->bus->number + 1,
 			 PCI_SLOT(bus->host_pci->devfn));
 		bcm47xx_fill_sprom(out, prefix);
 		return 0;
 	case BCMA_HOSTTYPE_SOC:
+		memset(out, 0, sizeof(struct ssb_sprom));
 		bcm47xx_fill_sprom_ethernet(out, NULL);
 		core = bcma_find_core(bus, BCMA_CORE_80211);
 		if (core) {
@@ -197,6 +194,8 @@ static void __init bcm47xx_register_bcma(void)
 	err = bcma_host_soc_register(&bcm47xx_bus.bcma);
 	if (err)
 		panic("Failed to initialize BCMA bus (err %d)", err);
+
+	bcm47xx_fill_bcma_boardinfo(&bcm47xx_bus.bcma.bus.boardinfo, NULL);
 }
 #endif
 
diff --git a/arch/mips/bcm47xx/sprom.c b/arch/mips/bcm47xx/sprom.c
index 5c8dcd2a8a9..d3a889745e2 100644
--- a/arch/mips/bcm47xx/sprom.c
+++ b/arch/mips/bcm47xx/sprom.c
@@ -165,6 +165,8 @@ static void bcm47xx_fill_sprom_r1234589(struct ssb_sprom *sprom,
 					const char *prefix)
 {
 	nvram_read_u16(prefix, NULL, "boardrev", &sprom->board_rev, 0);
+	if (!sprom->board_rev)
+		nvram_read_u16(NULL, NULL, "boardrev", &sprom->board_rev, 0);
 	nvram_read_u16(prefix, NULL, "boardnum", &sprom->board_num, 0);
 	nvram_read_u8(prefix, NULL, "ledbh0", &sprom->gpio0, 0xff);
 	nvram_read_u8(prefix, NULL, "ledbh1", &sprom->gpio1, 0xff);
@@ -555,8 +557,6 @@ void bcm47xx_fill_sprom_ethernet(struct ssb_sprom *sprom, const char *prefix)
 
 void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix)
 {
-	memset(sprom, 0, sizeof(struct ssb_sprom));
-
 	bcm47xx_fill_sprom_ethernet(sprom, prefix);
 
 	nvram_read_u8(prefix, NULL, "sromrev", &sprom->revision, 0);
@@ -618,3 +618,27 @@ void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix)
 		bcm47xx_fill_sprom_r1(sprom, prefix);
 	}
 }
+
+#ifdef CONFIG_BCM47XX_SSB
+void bcm47xx_fill_ssb_boardinfo(struct ssb_boardinfo *boardinfo,
+				const char *prefix)
+{
+	nvram_read_u16(prefix, NULL, "boardvendor", &boardinfo->vendor, 0);
+	if (!boardinfo->vendor)
+		boardinfo->vendor = SSB_BOARDVENDOR_BCM;
+
+	nvram_read_u16(prefix, NULL, "boardtype", &boardinfo->type, 0);
+}
+#endif
+
+#ifdef CONFIG_BCM47XX_BCMA
+void bcm47xx_fill_bcma_boardinfo(struct bcma_boardinfo *boardinfo,
+				 const char *prefix)
+{
+	nvram_read_u16(prefix, NULL, "boardvendor", &boardinfo->vendor, 0);
+	if (!boardinfo->vendor)
+		boardinfo->vendor = SSB_BOARDVENDOR_BCM;
+
+	nvram_read_u16(prefix, NULL, "boardtype", &boardinfo->type, 0);
+}
+#endif
diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
index 5ecaf47b34d..26fdaf40b93 100644
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
@@ -47,4 +47,13 @@ extern enum bcm47xx_bus_type bcm47xx_bus_type;
 void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix);
 void bcm47xx_fill_sprom_ethernet(struct ssb_sprom *sprom, const char *prefix);
 
+#ifdef CONFIG_BCM47XX_SSB
+void bcm47xx_fill_ssb_boardinfo(struct ssb_boardinfo *boardinfo,
+				const char *prefix);
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+void bcm47xx_fill_bcma_boardinfo(struct bcma_boardinfo *boardinfo,
+				 const char *prefix);
+#endif
+
 #endif /* __ASM_BCM47XX_H */
diff --git a/drivers/bcma/core.c b/drivers/bcma/core.c
index 893f6e0c759..bc6e89212ad 100644
--- a/drivers/bcma/core.c
+++ b/drivers/bcma/core.c
@@ -30,6 +30,7 @@ void bcma_core_disable(struct bcma_device *core, u32 flags)
 	udelay(10);
 
 	bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
+	bcma_aread32(core, BCMA_RESET_CTL);
 	udelay(1);
 }
 EXPORT_SYMBOL_GPL(bcma_core_disable);
@@ -77,7 +78,7 @@ void bcma_core_set_clockmode(struct bcma_device *core,
 			pr_err("HT force timeout\n");
 		break;
 	case BCMA_CLKMODE_DYNAMIC:
-		pr_warn("Dynamic clockmode not supported yet!\n");
+		bcma_set32(core, BCMA_CLKCTLST, ~BCMA_CLKCTLST_FORCEHT);
 		break;
 	}
 }
diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c
index 4d38ae179b4..9a96f14c8f4 100644
--- a/drivers/bcma/driver_pci.c
+++ b/drivers/bcma/driver_pci.c
@@ -24,14 +24,12 @@ u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address)
 	return pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_DATA);
 }
 
-#if 0
 static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data)
 {
 	pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address);
 	pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR);
 	pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data);
 }
-#endif
 
 static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy)
 {
@@ -170,13 +168,50 @@ static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc)
 		                     tmp & ~BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN);
 }
 
+static void bcma_core_pci_fixcfg(struct bcma_drv_pci *pc)
+{
+	struct bcma_device *core = pc->core;
+	u16 val16, core_index;
+	uint regoff;
+
+	regoff = BCMA_CORE_PCI_SPROM(BCMA_CORE_PCI_SPROM_PI_OFFSET);
+	core_index = (u16)core->core_index;
+
+	val16 = pcicore_read16(pc, regoff);
+	if (((val16 & BCMA_CORE_PCI_SPROM_PI_MASK) >> BCMA_CORE_PCI_SPROM_PI_SHIFT)
+	     != core_index) {
+		val16 = (core_index << BCMA_CORE_PCI_SPROM_PI_SHIFT) |
+			(val16 & ~BCMA_CORE_PCI_SPROM_PI_MASK);
+		pcicore_write16(pc, regoff, val16);
+	}
+}
+
+/* Fix MISC config to allow coming out of L2/L3-Ready state w/o PRST */
+/* Needs to happen when coming out of 'standby'/'hibernate' */
+static void bcma_core_pci_config_fixup(struct bcma_drv_pci *pc)
+{
+	u16 val16;
+	uint regoff;
+
+	regoff = BCMA_CORE_PCI_SPROM(BCMA_CORE_PCI_SPROM_MISC_CONFIG);
+
+	val16 = pcicore_read16(pc, regoff);
+
+	if (!(val16 & BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST)) {
+		val16 |= BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST;
+		pcicore_write16(pc, regoff, val16);
+	}
+}
+
 /**************************************************
  * Init.
  **************************************************/
 
 static void __devinit bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc)
 {
+	bcma_core_pci_fixcfg(pc);
 	bcma_pcicore_serdes_workaround(pc);
+	bcma_core_pci_config_fixup(pc);
 }
 
 void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc)
@@ -224,3 +259,17 @@ out:
 	return err;
 }
 EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl);
+
+void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend)
+{
+	u32 w;
+
+	w = bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG);
+	if (extend)
+		w |= BCMA_CORE_PCI_ASPMTIMER_EXTEND;
+	else
+		w &= ~BCMA_CORE_PCI_ASPMTIMER_EXTEND;
+	bcma_pcie_write(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG, w);
+	bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG);
+}
+EXPORT_SYMBOL_GPL(bcma_core_pci_extend_L1timer);
diff --git a/drivers/bcma/driver_pci_host.c b/drivers/bcma/driver_pci_host.c
index d2097a11c3c..b9a86edfec3 100644
--- a/drivers/bcma/driver_pci_host.c
+++ b/drivers/bcma/driver_pci_host.c
@@ -119,7 +119,7 @@ static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev,
 		if (unlikely(!addr))
 			goto out;
 		err = -ENOMEM;
-		mmio = ioremap_nocache(addr, len);
+		mmio = ioremap_nocache(addr, sizeof(val));
 		if (!mmio)
 			goto out;
 
@@ -171,7 +171,7 @@ static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev,
 			addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0;
 			addr |= (func << 8);
 			addr |= (off & 0xfc);
-			mmio = ioremap_nocache(addr, len);
+			mmio = ioremap_nocache(addr, sizeof(val));
 			if (!mmio)
 				goto out;
 		}
@@ -180,7 +180,7 @@ static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev,
 		if (unlikely(!addr))
 			goto out;
 		err = -ENOMEM;
-		mmio = ioremap_nocache(addr, len);
+		mmio = ioremap_nocache(addr, sizeof(val));
 		if (!mmio)
 			goto out;
 
@@ -491,8 +491,8 @@ void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc)
 	/* Ok, ready to run, register it to the system.
 	 * The following needs change, if we want to port hostmode
 	 * to non-MIPS platform. */
-	io_map_base = (unsigned long)ioremap_nocache(BCMA_SOC_PCI_MEM,
-						     0x04000000);
+	io_map_base = (unsigned long)ioremap_nocache(pc_host->mem_resource.start,
+						     resource_size(&pc_host->mem_resource));
 	pc_host->pci_controller.io_map_base = io_map_base;
 	set_io_port_base(pc_host->pci_controller.io_map_base);
 	/* Give some time to the PCI controller to configure itself with the new
diff --git a/drivers/bcma/host_pci.c b/drivers/bcma/host_pci.c
index e3928d68802..6c05cf470f9 100644
--- a/drivers/bcma/host_pci.c
+++ b/drivers/bcma/host_pci.c
@@ -201,6 +201,9 @@ static int __devinit bcma_host_pci_probe(struct pci_dev *dev,
 	bus->hosttype = BCMA_HOSTTYPE_PCI;
 	bus->ops = &bcma_host_pci_ops;
 
+	bus->boardinfo.vendor = bus->host_pci->subsystem_vendor;
+	bus->boardinfo.type = bus->host_pci->subsystem_device;
+
 	/* Register */
 	err = bcma_bus_register(bus);
 	if (err)
@@ -222,7 +225,7 @@ err_kfree_bus:
 	return err;
 }
 
-static void bcma_host_pci_remove(struct pci_dev *dev)
+static void __devexit bcma_host_pci_remove(struct pci_dev *dev)
 {
 	struct bcma_bus *bus = pci_get_drvdata(dev);
 
@@ -277,7 +280,7 @@ static struct pci_driver bcma_pci_bridge_driver = {
 	.name = "bcma-pci-bridge",
 	.id_table = bcma_pci_bridge_tbl,
 	.probe = bcma_host_pci_probe,
-	.remove = bcma_host_pci_remove,
+	.remove = __devexit_p(bcma_host_pci_remove),
 	.driver.pm = BCMA_PM_OPS,
 };
 
diff --git a/drivers/bcma/scan.c b/drivers/bcma/scan.c
index 3bea7fe25b2..5ed0718fc66 100644
--- a/drivers/bcma/scan.c
+++ b/drivers/bcma/scan.c
@@ -19,7 +19,14 @@ struct bcma_device_id_name {
 	u16 id;
 	const char *name;
 };
-struct bcma_device_id_name bcma_device_names[] = {
+
+static const struct bcma_device_id_name bcma_arm_device_names[] = {
+	{ BCMA_CORE_ARM_1176, "ARM 1176" },
+	{ BCMA_CORE_ARM_7TDMI, "ARM 7TDMI" },
+	{ BCMA_CORE_ARM_CM3, "ARM CM3" },
+};
+
+static const struct bcma_device_id_name bcma_bcm_device_names[] = {
 	{ BCMA_CORE_OOB_ROUTER, "OOB Router" },
 	{ BCMA_CORE_INVALID, "Invalid" },
 	{ BCMA_CORE_CHIPCOMMON, "ChipCommon" },
@@ -27,7 +34,6 @@ struct bcma_device_id_name bcma_device_names[] = {
 	{ BCMA_CORE_SRAM, "SRAM" },
 	{ BCMA_CORE_SDRAM, "SDRAM" },
 	{ BCMA_CORE_PCI, "PCI" },
-	{ BCMA_CORE_MIPS, "MIPS" },
 	{ BCMA_CORE_ETHERNET, "Fast Ethernet" },
 	{ BCMA_CORE_V90, "V90" },
 	{ BCMA_CORE_USB11_HOSTDEV, "USB 1.1 Hostdev" },
@@ -44,7 +50,6 @@ struct bcma_device_id_name bcma_device_names[] = {
 	{ BCMA_CORE_PHY_A, "PHY A" },
 	{ BCMA_CORE_PHY_B, "PHY B" },
 	{ BCMA_CORE_PHY_G, "PHY G" },
-	{ BCMA_CORE_MIPS_3302, "MIPS 3302" },
 	{ BCMA_CORE_USB11_HOST, "USB 1.1 Host" },
 	{ BCMA_CORE_USB11_DEV, "USB 1.1 Device" },
 	{ BCMA_CORE_USB20_HOST, "USB 2.0 Host" },
@@ -58,15 +63,11 @@ struct bcma_device_id_name bcma_device_names[] = {
 	{ BCMA_CORE_PHY_N, "PHY N" },
 	{ BCMA_CORE_SRAM_CTL, "SRAM Controller" },
 	{ BCMA_CORE_MINI_MACPHY, "Mini MACPHY" },
-	{ BCMA_CORE_ARM_1176, "ARM 1176" },
-	{ BCMA_CORE_ARM_7TDMI, "ARM 7TDMI" },
 	{ BCMA_CORE_PHY_LP, "PHY LP" },
 	{ BCMA_CORE_PMU, "PMU" },
 	{ BCMA_CORE_PHY_SSN, "PHY SSN" },
 	{ BCMA_CORE_SDIO_DEV, "SDIO Device" },
-	{ BCMA_CORE_ARM_CM3, "ARM CM3" },
 	{ BCMA_CORE_PHY_HT, "PHY HT" },
-	{ BCMA_CORE_MIPS_74K, "MIPS 74K" },
 	{ BCMA_CORE_MAC_GBIT, "GBit MAC" },
 	{ BCMA_CORE_DDR12_MEM_CTL, "DDR1/DDR2 Memory Controller" },
 	{ BCMA_CORE_PCIE_RC, "PCIe Root Complex" },
@@ -79,16 +80,41 @@ struct bcma_device_id_name bcma_device_names[] = {
 	{ BCMA_CORE_SHIM, "SHIM" },
 	{ BCMA_CORE_DEFAULT, "Default" },
 };
-const char *bcma_device_name(struct bcma_device_id *id)
+
+static const struct bcma_device_id_name bcma_mips_device_names[] = {
+	{ BCMA_CORE_MIPS, "MIPS" },
+	{ BCMA_CORE_MIPS_3302, "MIPS 3302" },
+	{ BCMA_CORE_MIPS_74K, "MIPS 74K" },
+};
+
+static const char *bcma_device_name(const struct bcma_device_id *id)
 {
-	int i;
+	const struct bcma_device_id_name *names;
+	int size, i;
+
+	/* search manufacturer specific names */
+	switch (id->manuf) {
+	case BCMA_MANUF_ARM:
+		names = bcma_arm_device_names;
+		size = ARRAY_SIZE(bcma_arm_device_names);
+		break;
+	case BCMA_MANUF_BCM:
+		names = bcma_bcm_device_names;
+		size = ARRAY_SIZE(bcma_bcm_device_names);
+		break;
+	case BCMA_MANUF_MIPS:
+		names = bcma_mips_device_names;
+		size = ARRAY_SIZE(bcma_mips_device_names);
+		break;
+	default:
+		return "UNKNOWN";
+	}
 
-	if (id->manuf == BCMA_MANUF_BCM) {
-		for (i = 0; i < ARRAY_SIZE(bcma_device_names); i++) {
-			if (bcma_device_names[i].id == id->id)
-				return bcma_device_names[i].name;
-		}
+	for (i = 0; i < size; i++) {
+		if (names[i].id == id->id)
+			return names[i].name;
 	}
+
 	return "UNKNOWN";
 }
 
diff --git a/drivers/bcma/sprom.c b/drivers/bcma/sprom.c
index 3e2a6002aae..c7f93359acb 100644
--- a/drivers/bcma/sprom.c
+++ b/drivers/bcma/sprom.c
@@ -181,6 +181,22 @@ static int bcma_sprom_valid(const u16 *sprom)
 #define SPEX(_field, _offset, _mask, _shift)	\
 	bus->sprom._field = ((sprom[SPOFF(_offset)] & (_mask)) >> (_shift))
 
+#define SPEX32(_field, _offset, _mask, _shift)	\
+	bus->sprom._field = ((((u32)sprom[SPOFF((_offset)+2)] << 16 | \
+				sprom[SPOFF(_offset)]) & (_mask)) >> (_shift))
+
+#define SPEX_ARRAY8(_field, _offset, _mask, _shift)	\
+	do {	\
+		SPEX(_field[0], _offset +  0, _mask, _shift);	\
+		SPEX(_field[1], _offset +  2, _mask, _shift);	\
+		SPEX(_field[2], _offset +  4, _mask, _shift);	\
+		SPEX(_field[3], _offset +  6, _mask, _shift);	\
+		SPEX(_field[4], _offset +  8, _mask, _shift);	\
+		SPEX(_field[5], _offset + 10, _mask, _shift);	\
+		SPEX(_field[6], _offset + 12, _mask, _shift);	\
+		SPEX(_field[7], _offset + 14, _mask, _shift);	\
+	} while (0)
+
 static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom)
 {
 	u16 v, o;
@@ -243,7 +259,8 @@ static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom)
 	SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, ~0, 0);
 	SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, ~0, 0);
 
-	SPEX(country_code, SSB_SPROM8_CCODE, ~0, 0);
+	SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8);
+	SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0);
 
 	/* Extract cores power info info */
 	for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
@@ -298,6 +315,136 @@ static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom)
 	     SSB_SROM8_FEM_TR_ISO_SHIFT);
 	SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_ANTSWLUT,
 	     SSB_SROM8_FEM_ANTSWLUT_SHIFT);
+
+	SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A,
+	     SSB_SPROM8_ANTAVAIL_A_SHIFT);
+	SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG,
+	     SSB_SPROM8_ANTAVAIL_BG_SHIFT);
+	SPEX(maxpwr_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_MAXP_BG_MASK, 0);
+	SPEX(itssi_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_ITSSI_BG,
+	     SSB_SPROM8_ITSSI_BG_SHIFT);
+	SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0);
+	SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A,
+	     SSB_SPROM8_ITSSI_A_SHIFT);
+	SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0);
+	SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK,
+	     SSB_SPROM8_MAXP_AL_SHIFT);
+	SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0);
+	SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1,
+	     SSB_SPROM8_GPIOA_P1_SHIFT);
+	SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0);
+	SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3,
+	     SSB_SPROM8_GPIOB_P3_SHIFT);
+	SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0);
+	SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G,
+	     SSB_SPROM8_TRI5G_SHIFT);
+	SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0);
+	SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH,
+	     SSB_SPROM8_TRI5GH_SHIFT);
+	SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G,
+	     SSB_SPROM8_RXPO2G_SHIFT);
+	SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G,
+	     SSB_SPROM8_RXPO5G_SHIFT);
+	SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0);
+	SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G,
+	     SSB_SPROM8_RSSISMC2G_SHIFT);
+	SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G,
+	     SSB_SPROM8_RSSISAV2G_SHIFT);
+	SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G,
+	     SSB_SPROM8_BXA2G_SHIFT);
+	SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0);
+	SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G,
+	     SSB_SPROM8_RSSISMC5G_SHIFT);
+	SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G,
+	     SSB_SPROM8_RSSISAV5G_SHIFT);
+	SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G,
+	     SSB_SPROM8_BXA5G_SHIFT);
+
+	SPEX(pa0b0, SSB_SPROM8_PA0B0, ~0, 0);
+	SPEX(pa0b1, SSB_SPROM8_PA0B1, ~0, 0);
+	SPEX(pa0b2, SSB_SPROM8_PA0B2, ~0, 0);
+	SPEX(pa1b0, SSB_SPROM8_PA1B0, ~0, 0);
+	SPEX(pa1b1, SSB_SPROM8_PA1B1, ~0, 0);
+	SPEX(pa1b2, SSB_SPROM8_PA1B2, ~0, 0);
+	SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, ~0, 0);
+	SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, ~0, 0);
+	SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, ~0, 0);
+	SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, ~0, 0);
+	SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, ~0, 0);
+	SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, ~0, 0);
+	SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, ~0, 0);
+	SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, ~0, 0);
+	SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, ~0, 0);
+	SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, ~0, 0);
+	SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, ~0, 0);
+
+	/* Extract the antenna gain values. */
+	SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01,
+	     SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT);
+	SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01,
+	     SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT);
+	SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23,
+	     SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT);
+	SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23,
+	     SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT);
+
+	SPEX(leddc_on_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_ON,
+	     SSB_SPROM8_LEDDC_ON_SHIFT);
+	SPEX(leddc_off_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_OFF,
+	     SSB_SPROM8_LEDDC_OFF_SHIFT);
+
+	SPEX(txchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_TXCHAIN,
+	     SSB_SPROM8_TXRXC_TXCHAIN_SHIFT);
+	SPEX(rxchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_RXCHAIN,
+	     SSB_SPROM8_TXRXC_RXCHAIN_SHIFT);
+	SPEX(antswitch, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_SWITCH,
+	     SSB_SPROM8_TXRXC_SWITCH_SHIFT);
+
+	SPEX(opo, SSB_SPROM8_OFDM2GPO, 0x00ff, 0);
+
+	SPEX_ARRAY8(mcs2gpo, SSB_SPROM8_2G_MCSPO, ~0, 0);
+	SPEX_ARRAY8(mcs5gpo, SSB_SPROM8_5G_MCSPO, ~0, 0);
+	SPEX_ARRAY8(mcs5glpo, SSB_SPROM8_5GL_MCSPO, ~0, 0);
+	SPEX_ARRAY8(mcs5ghpo, SSB_SPROM8_5GH_MCSPO, ~0, 0);
+
+	SPEX(rawtempsense, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_RAWTEMP,
+	     SSB_SPROM8_RAWTS_RAWTEMP_SHIFT);
+	SPEX(measpower, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_MEASPOWER,
+	     SSB_SPROM8_RAWTS_MEASPOWER_SHIFT);
+	SPEX(tempsense_slope, SSB_SPROM8_OPT_CORRX,
+	     SSB_SPROM8_OPT_CORRX_TEMP_SLOPE,
+	     SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT);
+	SPEX(tempcorrx, SSB_SPROM8_OPT_CORRX, SSB_SPROM8_OPT_CORRX_TEMPCORRX,
+	     SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT);
+	SPEX(tempsense_option, SSB_SPROM8_OPT_CORRX,
+	     SSB_SPROM8_OPT_CORRX_TEMP_OPTION,
+	     SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT);
+	SPEX(freqoffset_corr, SSB_SPROM8_HWIQ_IQSWP,
+	     SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR,
+	     SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT);
+	SPEX(iqcal_swp_dis, SSB_SPROM8_HWIQ_IQSWP,
+	     SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP,
+	     SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT);
+	SPEX(hw_iqcal_en, SSB_SPROM8_HWIQ_IQSWP, SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL,
+	     SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT);
+
+	SPEX(bw40po, SSB_SPROM8_BW40PO, ~0, 0);
+	SPEX(cddpo, SSB_SPROM8_CDDPO, ~0, 0);
+	SPEX(stbcpo, SSB_SPROM8_STBCPO, ~0, 0);
+	SPEX(bwduppo, SSB_SPROM8_BWDUPPO, ~0, 0);
+
+	SPEX(tempthresh, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_TRESH,
+	     SSB_SPROM8_THERMAL_TRESH_SHIFT);
+	SPEX(tempoffset, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_OFFSET,
+	     SSB_SPROM8_THERMAL_OFFSET_SHIFT);
+	SPEX(phycal_tempdelta, SSB_SPROM8_TEMPDELTA,
+	     SSB_SPROM8_TEMPDELTA_PHYCAL,
+	     SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT);
+	SPEX(temps_period, SSB_SPROM8_TEMPDELTA, SSB_SPROM8_TEMPDELTA_PERIOD,
+	     SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT);
+	SPEX(temps_hysteresis, SSB_SPROM8_TEMPDELTA,
+	     SSB_SPROM8_TEMPDELTA_HYSTERESIS,
+	     SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT);
 }
 
 /*
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 2812b152d6e..ad591bd240e 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -81,6 +81,9 @@ static struct usb_device_id ath3k_table[] = {
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE02C) },
 
+	/* Atheros AR5BBU22 with sflash firmware */
+	{ USB_DEVICE(0x0489, 0xE03C) },
+
 	{ }	/* Terminating entry */
 };
 
@@ -99,6 +102,9 @@ static struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
 
+	/* Atheros AR5BBU22 with sflash firmware */
+	{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
+
 	{ }	/* Terminating entry */
 };
 
diff --git a/drivers/bluetooth/btmrvl_drv.h b/drivers/bluetooth/btmrvl_drv.h
index 90bda50dc44..94f2d65131c 100644
--- a/drivers/bluetooth/btmrvl_drv.h
+++ b/drivers/bluetooth/btmrvl_drv.h
@@ -67,6 +67,7 @@ struct btmrvl_adapter {
 	u8 wakeup_tries;
 	wait_queue_head_t cmd_wait_q;
 	u8 cmd_complete;
+	bool is_suspended;
 };
 
 struct btmrvl_private {
@@ -139,8 +140,10 @@ void btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb);
 int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb);
 
 int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, int subcmd);
+int btmrvl_send_hscfg_cmd(struct btmrvl_private *priv);
 int btmrvl_enable_ps(struct btmrvl_private *priv);
 int btmrvl_prepare_command(struct btmrvl_private *priv);
+int btmrvl_enable_hs(struct btmrvl_private *priv);
 
 #ifdef CONFIG_DEBUG_FS
 void btmrvl_debugfs_init(struct hci_dev *hdev);
diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c
index d1209adc882..681ca9d18e1 100644
--- a/drivers/bluetooth/btmrvl_main.c
+++ b/drivers/bluetooth/btmrvl_main.c
@@ -200,6 +200,36 @@ int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, int subcmd)
 }
 EXPORT_SYMBOL_GPL(btmrvl_send_module_cfg_cmd);
 
+int btmrvl_send_hscfg_cmd(struct btmrvl_private *priv)
+{
+	struct sk_buff *skb;
+	struct btmrvl_cmd *cmd;
+
+	skb = bt_skb_alloc(sizeof(*cmd), GFP_ATOMIC);
+	if (!skb) {
+		BT_ERR("No free skb");
+		return -ENOMEM;
+	}
+
+	cmd = (struct btmrvl_cmd *) skb_put(skb, sizeof(*cmd));
+	cmd->ocf_ogf = cpu_to_le16(hci_opcode_pack(OGF,
+						   BT_CMD_HOST_SLEEP_CONFIG));
+	cmd->length = 2;
+	cmd->data[0] = (priv->btmrvl_dev.gpio_gap & 0xff00) >> 8;
+	cmd->data[1] = (u8) (priv->btmrvl_dev.gpio_gap & 0x00ff);
+
+	bt_cb(skb)->pkt_type = MRVL_VENDOR_PKT;
+
+	skb->dev = (void *) priv->btmrvl_dev.hcidev;
+	skb_queue_head(&priv->adapter->tx_queue, skb);
+
+	BT_DBG("Queue HSCFG Command, gpio=0x%x, gap=0x%x", cmd->data[0],
+	       cmd->data[1]);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btmrvl_send_hscfg_cmd);
+
 int btmrvl_enable_ps(struct btmrvl_private *priv)
 {
 	struct sk_buff *skb;
@@ -232,7 +262,7 @@ int btmrvl_enable_ps(struct btmrvl_private *priv)
 }
 EXPORT_SYMBOL_GPL(btmrvl_enable_ps);
 
-static int btmrvl_enable_hs(struct btmrvl_private *priv)
+int btmrvl_enable_hs(struct btmrvl_private *priv)
 {
 	struct sk_buff *skb;
 	struct btmrvl_cmd *cmd;
@@ -268,35 +298,15 @@ static int btmrvl_enable_hs(struct btmrvl_private *priv)
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(btmrvl_enable_hs);
 
 int btmrvl_prepare_command(struct btmrvl_private *priv)
 {
-	struct sk_buff *skb = NULL;
-	struct btmrvl_cmd *cmd;
 	int ret = 0;
 
 	if (priv->btmrvl_dev.hscfgcmd) {
 		priv->btmrvl_dev.hscfgcmd = 0;
-
-		skb = bt_skb_alloc(sizeof(*cmd), GFP_ATOMIC);
-		if (skb == NULL) {
-			BT_ERR("No free skb");
-			return -ENOMEM;
-		}
-
-		cmd = (struct btmrvl_cmd *) skb_put(skb, sizeof(*cmd));
-		cmd->ocf_ogf = cpu_to_le16(hci_opcode_pack(OGF, BT_CMD_HOST_SLEEP_CONFIG));
-		cmd->length = 2;
-		cmd->data[0] = (priv->btmrvl_dev.gpio_gap & 0xff00) >> 8;
-		cmd->data[1] = (u8) (priv->btmrvl_dev.gpio_gap & 0x00ff);
-
-		bt_cb(skb)->pkt_type = MRVL_VENDOR_PKT;
-
-		skb->dev = (void *) priv->btmrvl_dev.hcidev;
-		skb_queue_head(&priv->adapter->tx_queue, skb);
-
-		BT_DBG("Queue HSCFG Command, gpio=0x%x, gap=0x%x",
-						cmd->data[0], cmd->data[1]);
+		btmrvl_send_hscfg_cmd(priv);
 	}
 
 	if (priv->btmrvl_dev.pscmd) {
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index 27b74b0d547..a853244e7fd 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -339,9 +339,7 @@ static int btmrvl_sdio_download_helper(struct btmrvl_sdio_card *card)
 
 done:
 	kfree(tmphlprbuf);
-	if (fw_helper)
-		release_firmware(fw_helper);
-
+	release_firmware(fw_helper);
 	return ret;
 }
 
@@ -484,10 +482,7 @@ static int btmrvl_sdio_download_fw_w_helper(struct btmrvl_sdio_card *card)
 
 done:
 	kfree(tmpfwbuf);
-
-	if (fw_firmware)
-		release_firmware(fw_firmware);
-
+	release_firmware(fw_firmware);
 	return ret;
 }
 
@@ -1013,6 +1008,9 @@ static int btmrvl_sdio_probe(struct sdio_func *func,
 	priv->btmrvl_dev.psmode = 1;
 	btmrvl_enable_ps(priv);
 
+	priv->btmrvl_dev.gpio_gap = 0xffff;
+	btmrvl_send_hscfg_cmd(priv);
+
 	return 0;
 
 disable_host_int:
@@ -1048,11 +1046,111 @@ static void btmrvl_sdio_remove(struct sdio_func *func)
 	}
 }
 
+static int btmrvl_sdio_suspend(struct device *dev)
+{
+	struct sdio_func *func = dev_to_sdio_func(dev);
+	struct btmrvl_sdio_card *card;
+	struct btmrvl_private *priv;
+	mmc_pm_flag_t pm_flags;
+	struct hci_dev *hcidev;
+
+	if (func) {
+		pm_flags = sdio_get_host_pm_caps(func);
+		BT_DBG("%s: suspend: PM flags = 0x%x", sdio_func_id(func),
+		       pm_flags);
+		if (!(pm_flags & MMC_PM_KEEP_POWER)) {
+			BT_ERR("%s: cannot remain alive while suspended",
+			       sdio_func_id(func));
+			return -ENOSYS;
+		}
+		card = sdio_get_drvdata(func);
+		if (!card || !card->priv) {
+			BT_ERR("card or priv structure is not valid");
+			return 0;
+		}
+	} else {
+		BT_ERR("sdio_func is not specified");
+		return 0;
+	}
+
+	priv = card->priv;
+
+	if (priv->adapter->hs_state != HS_ACTIVATED) {
+		if (btmrvl_enable_hs(priv)) {
+			BT_ERR("HS not actived, suspend failed!");
+			return -EBUSY;
+		}
+	}
+	hcidev = priv->btmrvl_dev.hcidev;
+	BT_DBG("%s: SDIO suspend", hcidev->name);
+	hci_suspend_dev(hcidev);
+	skb_queue_purge(&priv->adapter->tx_queue);
+
+	priv->adapter->is_suspended = true;
+
+	/* We will keep the power when hs enabled successfully */
+	if (priv->adapter->hs_state == HS_ACTIVATED) {
+		BT_DBG("suspend with MMC_PM_KEEP_POWER");
+		return sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
+	} else {
+		BT_DBG("suspend without MMC_PM_KEEP_POWER");
+		return 0;
+	}
+}
+
+static int btmrvl_sdio_resume(struct device *dev)
+{
+	struct sdio_func *func = dev_to_sdio_func(dev);
+	struct btmrvl_sdio_card *card;
+	struct btmrvl_private *priv;
+	mmc_pm_flag_t pm_flags;
+	struct hci_dev *hcidev;
+
+	if (func) {
+		pm_flags = sdio_get_host_pm_caps(func);
+		BT_DBG("%s: resume: PM flags = 0x%x", sdio_func_id(func),
+		       pm_flags);
+		card = sdio_get_drvdata(func);
+		if (!card || !card->priv) {
+			BT_ERR("card or priv structure is not valid");
+			return 0;
+		}
+	} else {
+		BT_ERR("sdio_func is not specified");
+		return 0;
+	}
+	priv = card->priv;
+
+	if (!priv->adapter->is_suspended) {
+		BT_DBG("device already resumed");
+		return 0;
+	}
+
+	priv->adapter->is_suspended = false;
+	hcidev = priv->btmrvl_dev.hcidev;
+	BT_DBG("%s: SDIO resume", hcidev->name);
+	hci_resume_dev(hcidev);
+	priv->hw_wakeup_firmware(priv);
+	priv->adapter->hs_state = HS_DEACTIVATED;
+	BT_DBG("%s: HS DEACTIVATED in resume!", hcidev->name);
+
+	return 0;
+}
+
+static const struct dev_pm_ops btmrvl_sdio_pm_ops = {
+	.suspend	= btmrvl_sdio_suspend,
+	.resume		= btmrvl_sdio_resume,
+};
+
 static struct sdio_driver bt_mrvl_sdio = {
 	.name		= "btmrvl_sdio",
 	.id_table	= btmrvl_sdio_ids,
 	.probe		= btmrvl_sdio_probe,
 	.remove		= btmrvl_sdio_remove,
+	.drv = {
+		.owner = THIS_MODULE,
+		.pm = &btmrvl_sdio_pm_ops,
+	}
 };
 
 static int __init btmrvl_sdio_init_module(void)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 461c68bc4dd..c9463af8e56 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -143,6 +143,9 @@ static struct usb_device_id blacklist_table[] = {
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
 
+	/* Atheros AR5BBU12 with sflash firmware */
+	{ USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },
+
 	/* Broadcom BCM2035 */
 	{ USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },
 	{ USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU },
@@ -855,6 +858,7 @@ static void btusb_work(struct work_struct *work)
 {
 	struct btusb_data *data = container_of(work, struct btusb_data, work);
 	struct hci_dev *hdev = data->hdev;
+	int new_alts;
 	int err;
 
 	if (hdev->conn_hash.sco_num > 0) {
@@ -868,11 +872,19 @@ static void btusb_work(struct work_struct *work)
 
 			set_bit(BTUSB_DID_ISO_RESUME, &data->flags);
 		}
-		if (data->isoc_altsetting != 2) {
+
+		if (hdev->voice_setting & 0x0020) {
+			static const int alts[3] = { 2, 4, 5 };
+			new_alts = alts[hdev->conn_hash.sco_num - 1];
+		} else {
+			new_alts = hdev->conn_hash.sco_num;
+		}
+
+		if (data->isoc_altsetting != new_alts) {
 			clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
 			usb_kill_anchored_urbs(&data->isoc_anchor);
 
-			if (__set_isoc_interface(hdev, 2) < 0)
+			if (__set_isoc_interface(hdev, new_alts) < 0)
 				return;
 		}
 
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 98a8c05d4f2..e564579a611 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -388,7 +388,7 @@ static int hci_uart_register_dev(struct hci_uart *hu)
 	hdev->close = hci_uart_close;
 	hdev->flush = hci_uart_flush;
 	hdev->send  = hci_uart_send_frame;
-	hdev->parent = hu->tty->dev;
+	SET_HCIDEV_DEV(hdev, hu->tty->dev);
 
 	if (test_bit(HCI_UART_RAW_DEVICE, &hu->hdev_flags))
 		set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
diff --git a/drivers/bluetooth/hci_vhci.c b/drivers/bluetooth/hci_vhci.c
index 158bfe507da..3f72595a601 100644
--- a/drivers/bluetooth/hci_vhci.c
+++ b/drivers/bluetooth/hci_vhci.c
@@ -252,8 +252,9 @@ static int vhci_open(struct inode *inode, struct file *file)
 	}
 
 	file->private_data = data;
+	nonseekable_open(inode, file);
 
-	return nonseekable_open(inode, file);
+	return 0;
 }
 
 static int vhci_release(struct inode *inode, struct file *file)
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.h b/drivers/isdn/hardware/mISDN/hfcsusb.h
index cb1231b08f7..4157311d569 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.h
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.h
@@ -410,6 +410,12 @@ static struct usb_device_id hfcsusb_idtab[] = {
 			{LED_SCHEME1, {0x88, -64, -32, -16},
 					"ZyXEL OMNI.NET USB II"}),
 	},
+	{
+		USB_DEVICE(0x1ae7, 0x0525),
+		.driver_info = (unsigned long) &((struct hfcsusb_vdata)
+			{LED_SCHEME1, {0x88, -64, -32, -16},
+					"X-Tensions USB ISDN TA XC-525"}),
+	},
 	{ }
 };
 
diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 1adb0245b9d..0741aded9eb 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -1082,7 +1082,7 @@ static int gfar_probe(struct platform_device *ofdev)
 
 	if (dev->features & NETIF_F_IP_CSUM ||
 			priv->device_flags & FSL_GIANFAR_DEV_HAS_TIMER)
-		dev->hard_header_len += GMAC_FCB_LEN;
+		dev->needed_headroom = GMAC_FCB_LEN;
 
 	/* Program the isrg regs only if number of grps > 1 */
 	if (priv->num_grps > 1) {
diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index 28a65d3a03d..b869a358ce4 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -693,8 +693,8 @@ ath6kl_add_bss_if_needed(struct ath6kl_vif *vif,
 					  ie, 2 + vif->ssid_len + beacon_ie_len,
 					  0, GFP_KERNEL);
 		if (bss)
-			ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "added bss %pM to "
-				   "cfg80211\n", bssid);
+			ath6kl_dbg(ATH6KL_DBG_WLAN_CFG,
+				   "added bss %pM to cfg80211\n", bssid);
 		kfree(ie);
 	} else
 		ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "cfg80211 already has a bss\n");
@@ -882,6 +882,32 @@ void ath6kl_cfg80211_disconnect_event(struct ath6kl_vif *vif, u8 reason,
 	vif->sme_state = SME_DISCONNECTED;
 }
 
+static int ath6kl_set_probed_ssids(struct ath6kl *ar,
+				   struct ath6kl_vif *vif,
+				   struct cfg80211_ssid *ssids, int n_ssids)
+{
+	u8 i;
+
+	if (n_ssids > MAX_PROBED_SSID_INDEX)
+		return -EINVAL;
+
+	for (i = 0; i < n_ssids; i++) {
+		ath6kl_wmi_probedssid_cmd(ar->wmi, vif->fw_vif_idx, i,
+					  ssids[i].ssid_len ?
+					  SPECIFIC_SSID_FLAG : ANY_SSID_FLAG,
+					  ssids[i].ssid_len,
+					  ssids[i].ssid);
+	}
+
+	/* Make sure no old entries are left behind */
+	for (i = n_ssids; i < MAX_PROBED_SSID_INDEX; i++) {
+		ath6kl_wmi_probedssid_cmd(ar->wmi, vif->fw_vif_idx, i,
+					  DISABLE_SSID_FLAG, 0, NULL);
+	}
+
+	return 0;
+}
+
 static int ath6kl_cfg80211_scan(struct wiphy *wiphy, struct net_device *ndev,
 				struct cfg80211_scan_request *request)
 {
@@ -899,36 +925,25 @@ static int ath6kl_cfg80211_scan(struct wiphy *wiphy, struct net_device *ndev,
 
 	if (!ar->usr_bss_filter) {
 		clear_bit(CLEAR_BSSFILTER_ON_BEACON, &vif->flags);
-		ret = ath6kl_wmi_bssfilter_cmd(
-			ar->wmi, vif->fw_vif_idx,
-			(test_bit(CONNECTED, &vif->flags) ?
-			 ALL_BUT_BSS_FILTER : ALL_BSS_FILTER), 0);
+		ret = ath6kl_wmi_bssfilter_cmd(ar->wmi, vif->fw_vif_idx,
+					       ALL_BSS_FILTER, 0);
 		if (ret) {
 			ath6kl_err("couldn't set bss filtering\n");
 			return ret;
 		}
 	}
 
-	if (request->n_ssids && request->ssids[0].ssid_len) {
-		u8 i;
-
-		if (request->n_ssids > (MAX_PROBED_SSID_INDEX - 1))
-			request->n_ssids = MAX_PROBED_SSID_INDEX - 1;
-
-		for (i = 0; i < request->n_ssids; i++)
-			ath6kl_wmi_probedssid_cmd(ar->wmi, vif->fw_vif_idx,
-						  i + 1, SPECIFIC_SSID_FLAG,
-						  request->ssids[i].ssid_len,
-						  request->ssids[i].ssid);
-	}
+	ret = ath6kl_set_probed_ssids(ar, vif, request->ssids,
+				      request->n_ssids);
+	if (ret < 0)
+		return ret;
 
 	/* this also clears IE in fw if it's not set */
 	ret = ath6kl_wmi_set_appie_cmd(ar->wmi, vif->fw_vif_idx,
 				       WMI_FRAME_PROBE_REQ,
 				       request->ie, request->ie_len);
 	if (ret) {
-		ath6kl_err("failed to set Probe Request appie for "
-			   "scan");
+		ath6kl_err("failed to set Probe Request appie for scan");
 		return ret;
 	}
 
@@ -945,8 +960,7 @@ static int ath6kl_cfg80211_scan(struct wiphy *wiphy, struct net_device *ndev,
 
 		channels = kzalloc(n_channels * sizeof(u16), GFP_KERNEL);
 		if (channels == NULL) {
-			ath6kl_warn("failed to set scan channels, "
-				    "scan all channels");
+			ath6kl_warn("failed to set scan channels, scan all channels");
 			n_channels = 0;
 		}
 
@@ -1018,6 +1032,20 @@ out:
 	vif->scan_req = NULL;
 }
 
+void ath6kl_cfg80211_ch_switch_notify(struct ath6kl_vif *vif, int freq,
+				      enum wmi_phy_mode mode)
+{
+	enum nl80211_channel_type type;
+
+	ath6kl_dbg(ATH6KL_DBG_WLAN_CFG,
+		   "channel switch notify nw_type %d freq %d mode %d\n",
+		   vif->nw_type, freq, mode);
+
+	type = (mode == WMI_11G_HT20) ? NL80211_CHAN_HT20 : NL80211_CHAN_NO_HT;
+
+	cfg80211_ch_switch_notify(vif->ndev, freq, type);
+}
+
 static int ath6kl_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
 				   u8 key_index, bool pairwise,
 				   const u8 *mac_addr,
@@ -1111,9 +1139,8 @@ static int ath6kl_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
 		ar->ap_mode_bkey.key_len = key->key_len;
 		memcpy(ar->ap_mode_bkey.key, key->key, key->key_len);
 		if (!test_bit(CONNECTED, &vif->flags)) {
-			ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "Delay initial group "
-				   "key configuration until AP mode has been "
-				   "started\n");
+			ath6kl_dbg(ATH6KL_DBG_WLAN_CFG,
+				   "Delay initial group key configuration until AP mode has been started\n");
 			/*
 			 * The key will be set in ath6kl_connect_ap_mode() once
 			 * the connected event is received from the target.
@@ -1129,8 +1156,8 @@ static int ath6kl_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
 		 * the AP mode has properly started
 		 * (ath6kl_install_statioc_wep_keys).
 		 */
-		ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "Delay WEP key configuration "
-			   "until AP mode has been started\n");
+		ath6kl_dbg(ATH6KL_DBG_WLAN_CFG,
+			   "Delay WEP key configuration until AP mode has been started\n");
 		vif->wep_key_list[key_index].key_len = key->key_len;
 		memcpy(vif->wep_key_list[key_index].key, key->key,
 		       key->key_len);
@@ -1962,8 +1989,7 @@ static int ath6kl_wow_sta(struct ath6kl *ar, struct ath6kl_vif *vif)
 				sizeof(discvr_pattern), discvr_offset,
 				discvr_pattern, discvr_mask);
 		if (ret) {
-			ath6kl_err("failed to add WOW mDNS/SSDP/LLMNR "
-				   "pattern\n");
+			ath6kl_err("failed to add WOW mDNS/SSDP/LLMNR pattern\n");
 			return ret;
 		}
 	}
@@ -2031,6 +2057,10 @@ static int ath6kl_wow_suspend(struct ath6kl *ar, struct cfg80211_wowlan *wow)
 	u8 index = 0;
 	__be32 ips[MAX_IP_ADDRS];
 
+	/* The FW currently can't support multi-vif WoW properly. */
+	if (ar->num_vif > 1)
+		return -EIO;
+
 	vif = ath6kl_vif_first(ar);
 	if (!vif)
 		return -EIO;
@@ -2044,6 +2074,13 @@ static int ath6kl_wow_suspend(struct ath6kl *ar, struct cfg80211_wowlan *wow)
 	if (wow && (wow->n_patterns > WOW_MAX_FILTERS_PER_LIST))
 		return -EINVAL;
 
+	if (!test_bit(NETDEV_MCAST_ALL_ON, &vif->flags)) {
+		ret = ath6kl_wmi_mcast_filter_cmd(vif->ar->wmi,
+						vif->fw_vif_idx, false);
+		if (ret)
+			return ret;
+	}
+
 	/* Clear existing WOW patterns */
 	for (i = 0; i < WOW_MAX_FILTERS_PER_LIST; i++)
 		ath6kl_wmi_del_wow_pattern_cmd(ar->wmi, vif->fw_vif_idx,
@@ -2147,8 +2184,8 @@ static int ath6kl_wow_resume(struct ath6kl *ar)
 	ret = ath6kl_wmi_set_host_sleep_mode_cmd(ar->wmi, vif->fw_vif_idx,
 						 ATH6KL_HOST_MODE_AWAKE);
 	if (ret) {
-		ath6kl_warn("Failed to configure host sleep mode for "
-			    "wow resume: %d\n", ret);
+		ath6kl_warn("Failed to configure host sleep mode for wow resume: %d\n",
+			    ret);
 		ar->state = ATH6KL_STATE_WOW;
 		return ret;
 	}
@@ -2172,6 +2209,13 @@ static int ath6kl_wow_resume(struct ath6kl *ar)
 
 	ar->state = ATH6KL_STATE_ON;
 
+	if (!test_bit(NETDEV_MCAST_ALL_OFF, &vif->flags)) {
+		ret = ath6kl_wmi_mcast_filter_cmd(vif->ar->wmi,
+					vif->fw_vif_idx, true);
+		if (ret)
+			return ret;
+	}
+
 	netif_wake_queue(vif->ndev);
 
 	return 0;
@@ -2186,8 +2230,10 @@ static int ath6kl_cfg80211_deepsleep_suspend(struct ath6kl *ar)
 	if (!vif)
 		return -EIO;
 
-	if (!ath6kl_cfg80211_ready(vif))
+	if (!test_bit(WMI_READY, &ar->flag)) {
+		ath6kl_err("deepsleep failed as wmi is not ready\n");
 		return -EIO;
+	}
 
 	ath6kl_cfg80211_stop_all(ar);
 
@@ -2447,6 +2493,24 @@ static int ath6kl_set_htcap(struct ath6kl_vif *vif, enum ieee80211_band band,
 					band, htcap);
 }
 
+static int ath6kl_restore_htcap(struct ath6kl_vif *vif)
+{
+	struct wiphy *wiphy = vif->ar->wiphy;
+	int band, ret = 0;
+
+	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+		if (!wiphy->bands[band])
+			continue;
+
+		ret = ath6kl_set_htcap(vif, band,
+				wiphy->bands[band]->ht_cap.ht_supported);
+		if (ret)
+			return ret;
+	}
+
+	return ret;
+}
+
 static bool ath6kl_is_p2p_ie(const u8 *pos)
 {
 	return pos[0] == WLAN_EID_VENDOR_SPECIFIC && pos[1] >= 4 &&
@@ -2568,28 +2632,34 @@ static int ath6kl_get_rsn_capab(struct cfg80211_beacon_data *beacon,
 	/* skip element id and length */
 	rsn_ie += 2;
 
-	/* skip version, group cipher */
-	if (rsn_ie_len < 6)
+	/* skip version */
+	if (rsn_ie_len < 2)
 		return -EINVAL;
-	rsn_ie +=  6;
-	rsn_ie_len -= 6;
+	rsn_ie +=  2;
+	rsn_ie_len -= 2;
+
+	/* skip group cipher suite */
+	if (rsn_ie_len < 4)
+		return 0;
+	rsn_ie +=  4;
+	rsn_ie_len -= 4;
 
 	/* skip pairwise cipher suite */
 	if (rsn_ie_len < 2)
-		return -EINVAL;
-	cnt = *((u16 *) rsn_ie);
+		return 0;
+	cnt = get_unaligned_le16(rsn_ie);
 	rsn_ie += (2 + cnt * 4);
 	rsn_ie_len -= (2 + cnt * 4);
 
 	/* skip akm suite */
 	if (rsn_ie_len < 2)
-		return -EINVAL;
-	cnt = *((u16 *) rsn_ie);
+		return 0;
+	cnt = get_unaligned_le16(rsn_ie);
 	rsn_ie += (2 + cnt * 4);
 	rsn_ie_len -= (2 + cnt * 4);
 
 	if (rsn_ie_len < 2)
-		return -EINVAL;
+		return 0;
 
 	memcpy(rsn_capab, rsn_ie, 2);
 
@@ -2766,6 +2836,7 @@ static int ath6kl_start_ap(struct wiphy *wiphy, struct net_device *dev,
 			return res;
 	}
 
+	memcpy(&vif->profile, &p, sizeof(p));
 	res = ath6kl_wmi_ap_profile_commit(ar->wmi, vif->fw_vif_idx, &p);
 	if (res < 0)
 		return res;
@@ -2801,13 +2872,7 @@ static int ath6kl_stop_ap(struct wiphy *wiphy, struct net_device *dev)
 	clear_bit(CONNECTED, &vif->flags);
 
 	/* Restore ht setting in firmware */
-	if (ath6kl_set_htcap(vif, IEEE80211_BAND_2GHZ, true))
-		return -EIO;
-
-	if (ath6kl_set_htcap(vif, IEEE80211_BAND_5GHZ, true))
-		return -EIO;
-
-	return 0;
+	return ath6kl_restore_htcap(vif);
 }
 
 static const u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
@@ -3081,7 +3146,6 @@ static int ath6kl_cfg80211_sscan_start(struct wiphy *wiphy,
 	struct ath6kl_vif *vif = netdev_priv(dev);
 	u16 interval;
 	int ret;
-	u8 i;
 
 	if (ar->state != ATH6KL_STATE_ON)
 		return -EIO;
@@ -3089,29 +3153,23 @@ static int ath6kl_cfg80211_sscan_start(struct wiphy *wiphy,
 	if (vif->sme_state != SME_DISCONNECTED)
 		return -EBUSY;
 
+	/* The FW currently can't support multi-vif WoW properly. */
+	if (ar->num_vif > 1)
+		return -EIO;
+
 	ath6kl_cfg80211_scan_complete_event(vif, true);
 
-	for (i = 0; i < ar->wiphy->max_sched_scan_ssids; i++) {
-		ath6kl_wmi_probedssid_cmd(ar->wmi, vif->fw_vif_idx,
-					  i, DISABLE_SSID_FLAG,
-					  0, NULL);
-	}
+	ret = ath6kl_set_probed_ssids(ar, vif, request->ssids,
+				      request->n_ssids);
+	if (ret < 0)
+		return ret;
 
 	/* fw uses seconds, also make sure that it's >0 */
 	interval = max_t(u16, 1, request->interval / 1000);
 
 	ath6kl_wmi_scanparams_cmd(ar->wmi, vif->fw_vif_idx,
 				  interval, interval,
-				  10, 0, 0, 0, 3, 0, 0, 0);
-
-	if (request->n_ssids && request->ssids[0].ssid_len) {
-		for (i = 0; i < request->n_ssids; i++) {
-			ath6kl_wmi_probedssid_cmd(ar->wmi, vif->fw_vif_idx,
-						  i, SPECIFIC_SSID_FLAG,
-						  request->ssids[i].ssid_len,
-						  request->ssids[i].ssid);
-		}
-	}
+				  vif->bg_scan_period, 0, 0, 0, 3, 0, 0, 0);
 
 	ret = ath6kl_wmi_set_wow_mode_cmd(ar->wmi, vif->fw_vif_idx,
 					  ATH6KL_WOW_MODE_ENABLE,
@@ -3271,8 +3329,7 @@ void ath6kl_cfg80211_stop_all(struct ath6kl *ar)
 		ar->wmi->saved_pwr_mode = ar->wmi->pwr_mode;
 
 		if (ath6kl_wmi_powermode_cmd(ar->wmi, 0, REC_POWER) != 0)
-			ath6kl_warn("ath6kl_deep_sleep_enable: "
-				    "wmi_powermode_cmd failed\n");
+			ath6kl_warn("ath6kl_deep_sleep_enable: wmi_powermode_cmd failed\n");
 		return;
 	}
 
@@ -3352,6 +3409,7 @@ struct net_device *ath6kl_interface_add(struct ath6kl *ar, char *name,
 	vif->next_mode = nw_type;
 	vif->listen_intvl_t = ATH6KL_DEFAULT_LISTEN_INTVAL;
 	vif->bmiss_time_t = ATH6KL_DEFAULT_BMISS_TIME;
+	vif->bg_scan_period = 0;
 	vif->htcap.ht_enable = true;
 
 	memcpy(ndev->dev_addr, ar->mac_addr, ETH_ALEN);
@@ -3393,6 +3451,7 @@ err:
 int ath6kl_cfg80211_init(struct ath6kl *ar)
 {
 	struct wiphy *wiphy = ar->wiphy;
+	bool band_2gig = false, band_5gig = false, ht = false;
 	int ret;
 
 	wiphy->mgmt_stypes = ath6kl_mgmt_stypes;
@@ -3413,8 +3472,46 @@ int ath6kl_cfg80211_init(struct ath6kl *ar)
 	/* max num of ssids that can be probed during scanning */
 	wiphy->max_scan_ssids = MAX_PROBED_SSID_INDEX;
 	wiphy->max_scan_ie_len = 1000; /* FIX: what is correct limit? */
-	wiphy->bands[IEEE80211_BAND_2GHZ] = &ath6kl_band_2ghz;
-	wiphy->bands[IEEE80211_BAND_5GHZ] = &ath6kl_band_5ghz;
+	switch (ar->hw.cap) {
+	case WMI_11AN_CAP:
+		ht = true;
+	case WMI_11A_CAP:
+		band_5gig = true;
+		break;
+	case WMI_11GN_CAP:
+		ht = true;
+	case WMI_11G_CAP:
+		band_2gig = true;
+		break;
+	case WMI_11AGN_CAP:
+		ht = true;
+	case WMI_11AG_CAP:
+		band_2gig = true;
+		band_5gig = true;
+		break;
+	default:
+		ath6kl_err("invalid phy capability!\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Even if the fw has HT support, advertise HT cap only when
+	 * the firmware has support to override RSN capability, otherwise
+	 * 4-way handshake would fail.
+	 */
+	if (!(ht &&
+	      test_bit(ATH6KL_FW_CAPABILITY_RSN_CAP_OVERRIDE,
+		       ar->fw_capabilities))) {
+		ath6kl_band_2ghz.ht_cap.cap = 0;
+		ath6kl_band_2ghz.ht_cap.ht_supported = false;
+		ath6kl_band_5ghz.ht_cap.cap = 0;
+		ath6kl_band_5ghz.ht_cap.ht_supported = false;
+	}
+	if (band_2gig)
+		wiphy->bands[IEEE80211_BAND_2GHZ] = &ath6kl_band_2ghz;
+	if (band_5gig)
+		wiphy->bands[IEEE80211_BAND_5GHZ] = &ath6kl_band_5ghz;
+
 	wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
 
 	wiphy->cipher_suites = cipher_suites;
@@ -3430,7 +3527,7 @@ int ath6kl_cfg80211_init(struct ath6kl *ar)
 	wiphy->wowlan.pattern_min_len = 1;
 	wiphy->wowlan.pattern_max_len = WOW_PATTERN_SIZE;
 
-	wiphy->max_sched_scan_ssids = 10;
+	wiphy->max_sched_scan_ssids = MAX_PROBED_SSID_INDEX;
 
 	ar->wiphy->flags |= WIPHY_FLAG_SUPPORTS_FW_ROAM |
 			    WIPHY_FLAG_HAVE_AP_SME |
@@ -3447,8 +3544,7 @@ int ath6kl_cfg80211_init(struct ath6kl *ar)
 	ar->wiphy->probe_resp_offload =
 		NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS |
 		NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 |
-		NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P |
-		NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U;
+		NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P;
 
 	ret = wiphy_register(wiphy);
 	if (ret < 0) {
diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.h b/drivers/net/wireless/ath/ath6kl/cfg80211.h
index c5def436417..5ea8cbb79f4 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.h
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.h
@@ -28,6 +28,8 @@ enum ath6kl_cfg_suspend_mode {
 struct net_device *ath6kl_interface_add(struct ath6kl *ar, char *name,
 					enum nl80211_iftype type,
 					u8 fw_vif_idx, u8 nw_type);
+void ath6kl_cfg80211_ch_switch_notify(struct ath6kl_vif *vif, int freq,
+				      enum wmi_phy_mode mode);
 void ath6kl_cfg80211_scan_complete_event(struct ath6kl_vif *vif, bool aborted);
 
 void ath6kl_cfg80211_connect_event(struct ath6kl_vif *vif, u16 channel,
diff --git a/drivers/net/wireless/ath/ath6kl/core.h b/drivers/net/wireless/ath/ath6kl/core.h
index 9d67964a51d..4d9c6f14269 100644
--- a/drivers/net/wireless/ath/ath6kl/core.h
+++ b/drivers/net/wireless/ath/ath6kl/core.h
@@ -126,9 +126,9 @@ struct ath6kl_fw_ie {
 #define AR6003_HW_2_0_FIRMWARE_FILE		"athwlan.bin.z77"
 #define AR6003_HW_2_0_TCMD_FIRMWARE_FILE	"athtcmd_ram.bin"
 #define AR6003_HW_2_0_PATCH_FILE		"data.patch.bin"
-#define AR6003_HW_2_0_BOARD_DATA_FILE "ath6k/AR6003/hw2.0/bdata.bin"
+#define AR6003_HW_2_0_BOARD_DATA_FILE AR6003_HW_2_0_FW_DIR "/bdata.bin"
 #define AR6003_HW_2_0_DEFAULT_BOARD_DATA_FILE \
-			"ath6k/AR6003/hw2.0/bdata.SD31.bin"
+			AR6003_HW_2_0_FW_DIR "/bdata.SD31.bin"
 
 /* AR6003 3.0 definitions */
 #define AR6003_HW_2_1_1_VERSION                 0x30000582
@@ -139,25 +139,33 @@ struct ath6kl_fw_ie {
 #define AR6003_HW_2_1_1_UTF_FIRMWARE_FILE	"utf.bin"
 #define AR6003_HW_2_1_1_TESTSCRIPT_FILE	"nullTestFlow.bin"
 #define AR6003_HW_2_1_1_PATCH_FILE		"data.patch.bin"
-#define AR6003_HW_2_1_1_BOARD_DATA_FILE "ath6k/AR6003/hw2.1.1/bdata.bin"
+#define AR6003_HW_2_1_1_BOARD_DATA_FILE AR6003_HW_2_1_1_FW_DIR "/bdata.bin"
 #define AR6003_HW_2_1_1_DEFAULT_BOARD_DATA_FILE	\
-			"ath6k/AR6003/hw2.1.1/bdata.SD31.bin"
+			AR6003_HW_2_1_1_FW_DIR "/bdata.SD31.bin"
 
 /* AR6004 1.0 definitions */
 #define AR6004_HW_1_0_VERSION                 0x30000623
 #define AR6004_HW_1_0_FW_DIR			"ath6k/AR6004/hw1.0"
 #define AR6004_HW_1_0_FIRMWARE_FILE		"fw.ram.bin"
-#define AR6004_HW_1_0_BOARD_DATA_FILE         "ath6k/AR6004/hw1.0/bdata.bin"
+#define AR6004_HW_1_0_BOARD_DATA_FILE         AR6004_HW_1_0_FW_DIR "/bdata.bin"
 #define AR6004_HW_1_0_DEFAULT_BOARD_DATA_FILE \
-	"ath6k/AR6004/hw1.0/bdata.DB132.bin"
+	AR6004_HW_1_0_FW_DIR "/bdata.DB132.bin"
 
 /* AR6004 1.1 definitions */
 #define AR6004_HW_1_1_VERSION                 0x30000001
 #define AR6004_HW_1_1_FW_DIR			"ath6k/AR6004/hw1.1"
 #define AR6004_HW_1_1_FIRMWARE_FILE		"fw.ram.bin"
-#define AR6004_HW_1_1_BOARD_DATA_FILE         "ath6k/AR6004/hw1.1/bdata.bin"
+#define AR6004_HW_1_1_BOARD_DATA_FILE         AR6004_HW_1_1_FW_DIR "/bdata.bin"
 #define AR6004_HW_1_1_DEFAULT_BOARD_DATA_FILE \
-	"ath6k/AR6004/hw1.1/bdata.DB132.bin"
+	AR6004_HW_1_1_FW_DIR "/bdata.DB132.bin"
+
+/* AR6004 1.2 definitions */
+#define AR6004_HW_1_2_VERSION                 0x300007e8
+#define AR6004_HW_1_2_FW_DIR			"ath6k/AR6004/hw1.2"
+#define AR6004_HW_1_2_FIRMWARE_FILE           "fw.ram.bin"
+#define AR6004_HW_1_2_BOARD_DATA_FILE         AR6004_HW_1_2_FW_DIR "/bdata.bin"
+#define AR6004_HW_1_2_DEFAULT_BOARD_DATA_FILE \
+	AR6004_HW_1_2_FW_DIR "/bdata.bin"
 
 /* Per STA data, used in AP mode */
 #define STA_PS_AWAKE		BIT(0)
@@ -502,6 +510,8 @@ enum ath6kl_vif_state {
 	WLAN_ENABLED,
 	STATS_UPDATE_PEND,
 	HOST_SLEEP_MODE_CMD_PROCESSED,
+	NETDEV_MCAST_ALL_ON,
+	NETDEV_MCAST_ALL_OFF,
 };
 
 struct ath6kl_vif {
@@ -549,9 +559,11 @@ struct ath6kl_vif {
 	u16 assoc_bss_beacon_int;
 	u16 listen_intvl_t;
 	u16 bmiss_time_t;
+	u16 bg_scan_period;
 	u8 assoc_bss_dtim_period;
 	struct net_device_stats net_stats;
 	struct target_stats target_stats;
+	struct wmi_connect_cmd profile;
 
 	struct list_head mc_filter;
 };
@@ -640,6 +652,7 @@ struct ath6kl {
 	u8 sta_list_index;
 	struct ath6kl_req_key ap_mode_bkey;
 	struct sk_buff_head mcastpsq;
+	u32 want_ch_switch;
 
 	/*
 	 * FIXME: protects access to mcastpsq but is actually useless as
@@ -672,6 +685,7 @@ struct ath6kl {
 		u32 refclk_hz;
 		u32 uarttx_pin;
 		u32 testscript_addr;
+		enum wmi_phy_cap cap;
 
 		struct ath6kl_hw_fw {
 			const char *dir;
@@ -805,7 +819,8 @@ void aggr_reset_state(struct aggr_info_conn *aggr_conn);
 struct ath6kl_sta *ath6kl_find_sta(struct ath6kl_vif *vif, u8 *node_addr);
 struct ath6kl_sta *ath6kl_find_sta_by_aid(struct ath6kl *ar, u8 aid);
 
-void ath6kl_ready_event(void *devt, u8 *datap, u32 sw_ver, u32 abi_ver);
+void ath6kl_ready_event(void *devt, u8 *datap, u32 sw_ver, u32 abi_ver,
+			enum wmi_phy_cap cap);
 int ath6kl_control_tx(void *devt, struct sk_buff *skb,
 		      enum htc_endpoint_id eid);
 void ath6kl_connect_event(struct ath6kl_vif *vif, u16 channel,
diff --git a/drivers/net/wireless/ath/ath6kl/debug.c b/drivers/net/wireless/ath/ath6kl/debug.c
index 1b76aff7850..15cfe30e54f 100644
--- a/drivers/net/wireless/ath/ath6kl/debug.c
+++ b/drivers/net/wireless/ath/ath6kl/debug.c
@@ -401,8 +401,10 @@ static ssize_t ath6kl_fwlog_block_read(struct file *file,
 
 		ret = wait_for_completion_interruptible(
 			&ar->debug.fwlog_completion);
-		if (ret == -ERESTARTSYS)
+		if (ret == -ERESTARTSYS) {
+			vfree(buf);
 			return ret;
+		}
 
 		spin_lock(&ar->debug.fwlog_queue.lock);
 	}
@@ -1570,10 +1572,15 @@ static ssize_t ath6kl_bgscan_int_write(struct file *file,
 				size_t count, loff_t *ppos)
 {
 	struct ath6kl *ar = file->private_data;
+	struct ath6kl_vif *vif;
 	u16 bgscan_int;
 	char buf[32];
 	ssize_t len;
 
+	vif = ath6kl_vif_first(ar);
+	if (!vif)
+		return -EIO;
+
 	len = min(count, sizeof(buf) - 1);
 	if (copy_from_user(buf, user_buf, len))
 		return -EFAULT;
@@ -1585,6 +1592,8 @@ static ssize_t ath6kl_bgscan_int_write(struct file *file,
 	if (bgscan_int == 0)
 		bgscan_int = 0xffff;
 
+	vif->bg_scan_period = bgscan_int;
+
 	ath6kl_wmi_scanparams_cmd(ar->wmi, 0, 0, 0, bgscan_int, 0, 0, 0, 3,
 				  0, 0, 0);
 
@@ -1809,6 +1818,7 @@ int ath6kl_debug_init_fs(struct ath6kl *ar)
 void ath6kl_debug_cleanup(struct ath6kl *ar)
 {
 	skb_queue_purge(&ar->debug.fwlog_queue);
+	complete(&ar->debug.fwlog_completion);
 	kfree(ar->debug.roam_tbl);
 }
 
diff --git a/drivers/net/wireless/ath/ath6kl/htc_mbox.c b/drivers/net/wireless/ath/ath6kl/htc_mbox.c
index 065e61516d7..2798624d3a9 100644
--- a/drivers/net/wireless/ath/ath6kl/htc_mbox.c
+++ b/drivers/net/wireless/ath/ath6kl/htc_mbox.c
@@ -83,10 +83,7 @@ static void ath6kl_credit_init(struct ath6kl_htc_credit_info *cred_info,
 			 * never goes inactive EVER.
 			 */
 			cur_ep_dist->dist_flags |= HTC_EP_ACTIVE;
-		} else if (cur_ep_dist->svc_id == WMI_DATA_BK_SVC)
-			/* this is the lowest priority data endpoint */
-			/* FIXME: this looks fishy, check */
-			cred_info->lowestpri_ep_dist = cur_ep_dist->list;
+		}
 
 		/*
 		 * Streams have to be created (explicit | implicit) for all
@@ -100,6 +97,13 @@ static void ath6kl_credit_init(struct ath6kl_htc_credit_info *cred_info,
 		 */
 	}
 
+	/*
+	 * For ath6kl_credit_seek function,
+	 * it use list_for_each_entry_reverse to walk around the whole ep list.
+	 * Therefore assign this lowestpri_ep_dist after walk around the ep_list
+	 */
+	cred_info->lowestpri_ep_dist = cur_ep_dist->list;
+
 	WARN_ON(cred_info->cur_free_credits <= 0);
 
 	list_for_each_entry(cur_ep_dist, ep_list, list) {
@@ -758,7 +762,7 @@ static void ath6kl_htc_tx_bundle(struct htc_endpoint *endpoint,
 	u32 txb_mask;
 	u8 ac = WMM_NUM_AC;
 
-	if ((HTC_CTRL_RSVD_SVC != endpoint->svc_id) ||
+	if ((HTC_CTRL_RSVD_SVC != endpoint->svc_id) &&
 	    (WMI_CONTROL_SVC != endpoint->svc_id))
 		ac = target->dev->ar->ep2ac_map[endpoint->eid];
 
@@ -793,16 +797,17 @@ static void ath6kl_htc_tx_bundle(struct htc_endpoint *endpoint,
 				 * itself
 				 */
 				txb_mask = ((1 << ac) - 1);
-		/*
-		 * when the scatter request resources drop below a
-		 * certain threshold, disable Tx bundling for all
-		 * AC's with priority lower than the current requesting
-		 * AC. Otherwise re-enable Tx bundling for them
-		 */
-		if (scat_req->scat_q_depth < ATH6KL_SCATTER_REQS)
-			target->tx_bndl_mask &= ~txb_mask;
-		else
-			target->tx_bndl_mask |= txb_mask;
+
+			/*
+			 * when the scatter request resources drop below a
+			 * certain threshold, disable Tx bundling for all
+			 * AC's with priority lower than the current requesting
+			 * AC. Otherwise re-enable Tx bundling for them
+			 */
+			if (scat_req->scat_q_depth < ATH6KL_SCATTER_REQS)
+				target->tx_bndl_mask &= ~txb_mask;
+			else
+				target->tx_bndl_mask |= txb_mask;
 		}
 
 		ath6kl_dbg(ATH6KL_DBG_HTC, "htc tx pkts to scatter: %d\n",
@@ -849,6 +854,7 @@ static void ath6kl_htc_tx_from_queue(struct htc_target *target,
 	int bundle_sent;
 	int n_pkts_bundle;
 	u8 ac = WMM_NUM_AC;
+	int status;
 
 	spin_lock_bh(&target->tx_lock);
 
@@ -866,7 +872,7 @@ static void ath6kl_htc_tx_from_queue(struct htc_target *target,
 	 */
 	INIT_LIST_HEAD(&txq);
 
-	if ((HTC_CTRL_RSVD_SVC != endpoint->svc_id) ||
+	if ((HTC_CTRL_RSVD_SVC != endpoint->svc_id) &&
 	    (WMI_CONTROL_SVC != endpoint->svc_id))
 		ac = target->dev->ar->ep2ac_map[endpoint->eid];
 
@@ -910,7 +916,12 @@ static void ath6kl_htc_tx_from_queue(struct htc_target *target,
 
 			ath6kl_htc_tx_prep_pkt(packet, packet->info.tx.flags,
 					       0, packet->info.tx.seqno);
-			ath6kl_htc_tx_issue(target, packet);
+			status = ath6kl_htc_tx_issue(target, packet);
+
+			if (status) {
+				packet->status = status;
+				packet->completion(packet->context, packet);
+			}
 		}
 
 		spin_lock_bh(&target->tx_lock);
diff --git a/drivers/net/wireless/ath/ath6kl/htc_pipe.c b/drivers/net/wireless/ath/ath6kl/htc_pipe.c
index b277b344688..f9626c72369 100644
--- a/drivers/net/wireless/ath/ath6kl/htc_pipe.c
+++ b/drivers/net/wireless/ath/ath6kl/htc_pipe.c
@@ -108,8 +108,6 @@ static void get_htc_packet_credit_based(struct htc_target *target,
 
 		/* get packet at head, but don't remove it */
 		packet = list_first_entry(&ep->txq, struct htc_packet, list);
-		if (packet == NULL)
-			break;
 
 		ath6kl_dbg(ATH6KL_DBG_HTC,
 			   "%s: got head packet:0x%p , queue depth: %d\n",
@@ -803,8 +801,6 @@ static int htc_send_packets_multiple(struct htc_target *target,
 
 	/* get first packet to find out which ep the packets will go into */
 	packet = list_first_entry(pkt_queue, struct htc_packet, list);
-	if (packet == NULL)
-		return -EINVAL;
 
 	if (packet->endpoint >= ENDPOINT_MAX) {
 		WARN_ON_ONCE(1);
@@ -1382,6 +1378,9 @@ static int ath6kl_htc_pipe_conn_service(struct htc_target *target,
 	/* copy all the callbacks */
 	ep->ep_cb = conn_req->ep_cb;
 
+	/* initialize tx_drop_packet_threshold */
+	ep->tx_drop_packet_threshold = MAX_HI_COOKIE_NUM;
+
 	status = ath6kl_hif_pipe_map_service(ar, ep->svc_id,
 					     &ep->pipe.pipeid_ul,
 					     &ep->pipe.pipeid_dl);
@@ -1636,10 +1635,6 @@ static int ath6kl_htc_pipe_add_rxbuf_multiple(struct htc_target *target,
 		return -EINVAL;
 
 	first = list_first_entry(pkt_queue, struct htc_packet, list);
-	if (first == NULL) {
-		WARN_ON_ONCE(1);
-		return -EINVAL;
-	}
 
 	if (first->endpoint >= ENDPOINT_MAX) {
 		WARN_ON_ONCE(1);
diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c
index 29ef50ea07d..7eb0515f458 100644
--- a/drivers/net/wireless/ath/ath6kl/init.c
+++ b/drivers/net/wireless/ath/ath6kl/init.c
@@ -119,6 +119,24 @@ static const struct ath6kl_hw hw_list[] = {
 		.fw_board		= AR6004_HW_1_1_BOARD_DATA_FILE,
 		.fw_default_board	= AR6004_HW_1_1_DEFAULT_BOARD_DATA_FILE,
 	},
+	{
+		.id				= AR6004_HW_1_2_VERSION,
+		.name				= "ar6004 hw 1.2",
+		.dataset_patch_addr		= 0x436ecc,
+		.app_load_addr			= 0x1234,
+		.board_ext_data_addr		= 0x437000,
+		.reserved_ram_size		= 9216,
+		.board_addr			= 0x435c00,
+		.refclk_hz			= 40000000,
+		.uarttx_pin			= 11,
+
+		.fw = {
+			.dir		= AR6004_HW_1_2_FW_DIR,
+			.fw		= AR6004_HW_1_2_FIRMWARE_FILE,
+		},
+		.fw_board		= AR6004_HW_1_2_BOARD_DATA_FILE,
+		.fw_default_board	= AR6004_HW_1_2_DEFAULT_BOARD_DATA_FILE,
+	},
 };
 
 /*
@@ -445,9 +463,9 @@ static int ath6kl_target_config_wlan_params(struct ath6kl *ar, int idx)
 					      P2P_FLAG_MACADDR_REQ |
 					      P2P_FLAG_HMODEL_REQ);
 		if (ret) {
-			ath6kl_dbg(ATH6KL_DBG_TRC, "failed to request P2P "
-				   "capabilities (%d) - assuming P2P not "
-				   "supported\n", ret);
+			ath6kl_dbg(ATH6KL_DBG_TRC,
+				   "failed to request P2P capabilities (%d) - assuming P2P not supported\n",
+				   ret);
 			ar->p2p = false;
 		}
 	}
@@ -456,8 +474,9 @@ static int ath6kl_target_config_wlan_params(struct ath6kl *ar, int idx)
 		/* Enable Probe Request reporting for P2P */
 		ret = ath6kl_wmi_probe_report_req_cmd(ar->wmi, idx, true);
 		if (ret) {
-			ath6kl_dbg(ATH6KL_DBG_TRC, "failed to enable Probe "
-				   "Request reporting (%d)\n", ret);
+			ath6kl_dbg(ATH6KL_DBG_TRC,
+				   "failed to enable Probe Request reporting (%d)\n",
+				   ret);
 		}
 	}
 
diff --git a/drivers/net/wireless/ath/ath6kl/main.c b/drivers/net/wireless/ath/ath6kl/main.c
index 4d818f96c41..e5524470529 100644
--- a/drivers/net/wireless/ath/ath6kl/main.c
+++ b/drivers/net/wireless/ath/ath6kl/main.c
@@ -421,8 +421,8 @@ void ath6kl_connect_ap_mode_bss(struct ath6kl_vif *vif, u16 channel)
 		if (!ik->valid)
 			break;
 
-		ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "Delayed addkey for "
-			   "the initial group key for AP mode\n");
+		ath6kl_dbg(ATH6KL_DBG_WLAN_CFG,
+			   "Delayed addkey for the initial group key for AP mode\n");
 		memset(key_rsc, 0, sizeof(key_rsc));
 		res = ath6kl_wmi_addkey_cmd(
 			ar->wmi, vif->fw_vif_idx, ik->key_index, ik->key_type,
@@ -430,12 +430,19 @@ void ath6kl_connect_ap_mode_bss(struct ath6kl_vif *vif, u16 channel)
 			ik->key,
 			KEY_OP_INIT_VAL, NULL, SYNC_BOTH_WMIFLAG);
 		if (res) {
-			ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "Delayed "
-				   "addkey failed: %d\n", res);
+			ath6kl_dbg(ATH6KL_DBG_WLAN_CFG,
+				   "Delayed addkey failed: %d\n", res);
 		}
 		break;
 	}
 
+	if (ar->want_ch_switch & (1 << vif->fw_vif_idx)) {
+		ar->want_ch_switch &= ~(1 << vif->fw_vif_idx);
+		/* we actually don't know the phymode, default to HT20 */
+		ath6kl_cfg80211_ch_switch_notify(vif, channel,
+						 WMI_11G_HT20);
+	}
+
 	ath6kl_wmi_bssfilter_cmd(ar->wmi, vif->fw_vif_idx, NONE_BSS_FILTER, 0);
 	set_bit(CONNECTED, &vif->flags);
 	netif_carrier_on(vif->ndev);
@@ -541,7 +548,8 @@ void ath6kl_disconnect(struct ath6kl_vif *vif)
 
 /* WMI Event handlers */
 
-void ath6kl_ready_event(void *devt, u8 *datap, u32 sw_ver, u32 abi_ver)
+void ath6kl_ready_event(void *devt, u8 *datap, u32 sw_ver, u32 abi_ver,
+			enum wmi_phy_cap cap)
 {
 	struct ath6kl *ar = devt;
 
@@ -551,6 +559,7 @@ void ath6kl_ready_event(void *devt, u8 *datap, u32 sw_ver, u32 abi_ver)
 
 	ar->version.wlan_ver = sw_ver;
 	ar->version.abi_ver = abi_ver;
+	ar->hw.cap = cap;
 
 	snprintf(ar->wiphy->fw_version,
 		 sizeof(ar->wiphy->fw_version),
@@ -584,6 +593,45 @@ void ath6kl_scan_complete_evt(struct ath6kl_vif *vif, int status)
 	ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "scan complete: %d\n", status);
 }
 
+static int ath6kl_commit_ch_switch(struct ath6kl_vif *vif, u16 channel)
+{
+
+	struct ath6kl *ar = vif->ar;
+
+	vif->next_chan = channel;
+	vif->profile.ch = cpu_to_le16(channel);
+
+	switch (vif->nw_type) {
+	case AP_NETWORK:
+		return ath6kl_wmi_ap_profile_commit(ar->wmi, vif->fw_vif_idx,
+						    &vif->profile);
+	default:
+		ath6kl_err("won't switch channels nw_type=%d\n", vif->nw_type);
+		return -ENOTSUPP;
+	}
+}
+
+static void ath6kl_check_ch_switch(struct ath6kl *ar, u16 channel)
+{
+
+	struct ath6kl_vif *vif;
+	int res = 0;
+
+	if (!ar->want_ch_switch)
+		return;
+
+	spin_lock_bh(&ar->list_lock);
+	list_for_each_entry(vif, &ar->vif_list, list) {
+		if (ar->want_ch_switch & (1 << vif->fw_vif_idx))
+			res = ath6kl_commit_ch_switch(vif, channel);
+
+		if (res)
+			ath6kl_err("channel switch failed nw_type %d res %d\n",
+				   vif->nw_type, res);
+	}
+	spin_unlock_bh(&ar->list_lock);
+}
+
 void ath6kl_connect_event(struct ath6kl_vif *vif, u16 channel, u8 *bssid,
 			  u16 listen_int, u16 beacon_int,
 			  enum network_type net_type, u8 beacon_ie_len,
@@ -601,9 +649,11 @@ void ath6kl_connect_event(struct ath6kl_vif *vif, u16 channel, u8 *bssid,
 	memcpy(vif->bssid, bssid, sizeof(vif->bssid));
 	vif->bss_ch = channel;
 
-	if ((vif->nw_type == INFRA_NETWORK))
+	if ((vif->nw_type == INFRA_NETWORK)) {
 		ath6kl_wmi_listeninterval_cmd(ar->wmi, vif->fw_vif_idx,
 					      vif->listen_intvl_t, 0);
+		ath6kl_check_ch_switch(ar, channel);
+	}
 
 	netif_wake_queue(vif->ndev);
 
@@ -926,6 +976,11 @@ void ath6kl_disconnect_event(struct ath6kl_vif *vif, u8 reason, u8 *bssid,
 	struct ath6kl *ar = vif->ar;
 
 	if (vif->nw_type == AP_NETWORK) {
+		/* disconnect due to other STA vif switching channels */
+		if (reason == BSS_DISCONNECTED &&
+		    prot_reason_status == WMI_AP_REASON_STA_ROAM)
+			ar->want_ch_switch |= 1 << vif->fw_vif_idx;
+
 		if (!ath6kl_remove_sta(ar, bssid, prot_reason_status))
 			return;
 
@@ -1090,7 +1145,7 @@ static int ath6kl_set_features(struct net_device *dev,
 static void ath6kl_set_multicast_list(struct net_device *ndev)
 {
 	struct ath6kl_vif *vif = netdev_priv(ndev);
-	bool mc_all_on = false, mc_all_off = false;
+	bool mc_all_on = false;
 	int mc_count = netdev_mc_count(ndev);
 	struct netdev_hw_addr *ha;
 	bool found;
@@ -1102,24 +1157,41 @@ static void ath6kl_set_multicast_list(struct net_device *ndev)
 	    !test_bit(WLAN_ENABLED, &vif->flags))
 		return;
 
+	/* Enable multicast-all filter. */
 	mc_all_on = !!(ndev->flags & IFF_PROMISC) ||
 		    !!(ndev->flags & IFF_ALLMULTI) ||
 		    !!(mc_count > ATH6K_MAX_MC_FILTERS_PER_LIST);
 
-	mc_all_off = !(ndev->flags & IFF_MULTICAST) || mc_count == 0;
+	if (mc_all_on)
+		set_bit(NETDEV_MCAST_ALL_ON, &vif->flags);
+	else
+		clear_bit(NETDEV_MCAST_ALL_ON, &vif->flags);
+
+	mc_all_on = mc_all_on || (vif->ar->state == ATH6KL_STATE_ON);
 
-	if (mc_all_on || mc_all_off) {
-		/* Enable/disable all multicast */
-		ath6kl_dbg(ATH6KL_DBG_TRC, "%s multicast filter\n",
-			   mc_all_on ? "enabling" : "disabling");
-		ret = ath6kl_wmi_mcast_filter_cmd(vif->ar->wmi, vif->fw_vif_idx,
+	if (!(ndev->flags & IFF_MULTICAST)) {
+		mc_all_on = false;
+		set_bit(NETDEV_MCAST_ALL_OFF, &vif->flags);
+	} else {
+		clear_bit(NETDEV_MCAST_ALL_OFF, &vif->flags);
+	}
+
+	/* Enable/disable "multicast-all" filter*/
+	ath6kl_dbg(ATH6KL_DBG_TRC, "%s multicast-all filter\n",
+		   mc_all_on ? "enabling" : "disabling");
+
+	ret = ath6kl_wmi_mcast_filter_cmd(vif->ar->wmi, vif->fw_vif_idx,
 						  mc_all_on);
-		if (ret)
-			ath6kl_warn("Failed to %s multicast receive\n",
-				    mc_all_on ? "enable" : "disable");
+	if (ret) {
+		ath6kl_warn("Failed to %s multicast-all receive\n",
+			    mc_all_on ? "enable" : "disable");
 		return;
 	}
 
+	if (test_bit(NETDEV_MCAST_ALL_ON, &vif->flags))
+		return;
+
+	/* Keep the driver and firmware mcast list in sync. */
 	list_for_each_entry_safe(mc_filter, tmp, &vif->mc_filter, list) {
 		found = false;
 		netdev_for_each_mc_addr(ha, ndev) {
diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c
index 44ea7a74210..05b95405f7b 100644
--- a/drivers/net/wireless/ath/ath6kl/sdio.c
+++ b/drivers/net/wireless/ath/ath6kl/sdio.c
@@ -552,7 +552,7 @@ static int ath6kl_sdio_write_async(struct ath6kl *ar, u32 address, u8 *buffer,
 
 	bus_req = ath6kl_sdio_alloc_busreq(ar_sdio);
 
-	if (!bus_req)
+	if (WARN_ON_ONCE(!bus_req))
 		return -ENOMEM;
 
 	bus_req->address = address;
@@ -915,6 +915,9 @@ static int ath6kl_sdio_suspend(struct ath6kl *ar, struct cfg80211_wowlan *wow)
 	}
 
 cut_pwr:
+	if (func->card && func->card->host)
+		func->card->host->pm_flags &= ~MMC_PM_KEEP_POWER;
+
 	return ath6kl_cfg80211_suspend(ar, ATH6KL_CFG_SUSPEND_CUTPOWER, NULL);
 }
 
@@ -985,9 +988,8 @@ static int ath6kl_set_addrwin_reg(struct ath6kl *ar, u32 reg_addr, u32 addr)
 	}
 
 	if (status) {
-		ath6kl_err("%s: failed to write initial bytes of 0x%x "
-			   "to window reg: 0x%X\n", __func__,
-			   addr, reg_addr);
+		ath6kl_err("%s: failed to write initial bytes of 0x%x to window reg: 0x%X\n",
+			   __func__, addr, reg_addr);
 		return status;
 	}
 
@@ -1076,8 +1078,8 @@ static int ath6kl_sdio_bmi_credits(struct ath6kl *ar)
 					 (u8 *)&ar->bmi.cmd_credits, 4,
 					 HIF_RD_SYNC_BYTE_INC);
 		if (ret) {
-			ath6kl_err("Unable to decrement the command credit "
-						"count register: %d\n", ret);
+			ath6kl_err("Unable to decrement the command credit count register: %d\n",
+				   ret);
 			return ret;
 		}
 
@@ -1457,3 +1459,6 @@ MODULE_FIRMWARE(AR6004_HW_1_0_DEFAULT_BOARD_DATA_FILE);
 MODULE_FIRMWARE(AR6004_HW_1_1_FW_DIR "/" AR6004_HW_1_1_FIRMWARE_FILE);
 MODULE_FIRMWARE(AR6004_HW_1_1_BOARD_DATA_FILE);
 MODULE_FIRMWARE(AR6004_HW_1_1_DEFAULT_BOARD_DATA_FILE);
+MODULE_FIRMWARE(AR6004_HW_1_2_FW_DIR "/" AR6004_HW_1_2_FIRMWARE_FILE);
+MODULE_FIRMWARE(AR6004_HW_1_2_BOARD_DATA_FILE);
+MODULE_FIRMWARE(AR6004_HW_1_2_DEFAULT_BOARD_DATA_FILE);
diff --git a/drivers/net/wireless/ath/ath6kl/txrx.c b/drivers/net/wireless/ath/ath6kl/txrx.c
index 82f2f5cb475..67206aedea6 100644
--- a/drivers/net/wireless/ath/ath6kl/txrx.c
+++ b/drivers/net/wireless/ath/ath6kl/txrx.c
@@ -362,15 +362,11 @@ int ath6kl_data_tx(struct sk_buff *skb, struct net_device *dev)
 		   skb, skb->data, skb->len);
 
 	/* If target is not associated */
-	if (!test_bit(CONNECTED, &vif->flags)) {
-		dev_kfree_skb(skb);
-		return 0;
-	}
+	if (!test_bit(CONNECTED, &vif->flags))
+		goto fail_tx;
 
-	if (WARN_ON_ONCE(ar->state != ATH6KL_STATE_ON)) {
-		dev_kfree_skb(skb);
-		return 0;
-	}
+	if (WARN_ON_ONCE(ar->state != ATH6KL_STATE_ON))
+		goto fail_tx;
 
 	if (!test_bit(WMI_READY, &ar->flag))
 		goto fail_tx;
diff --git a/drivers/net/wireless/ath/ath6kl/usb.c b/drivers/net/wireless/ath/ath6kl/usb.c
index 44a795f14da..3740c3d6ab8 100644
--- a/drivers/net/wireless/ath/ath6kl/usb.c
+++ b/drivers/net/wireless/ath/ath6kl/usb.c
@@ -1037,6 +1037,14 @@ static void ath6kl_usb_stop(struct ath6kl *ar)
 	hif_stop(ar);
 }
 
+static void ath6kl_usb_cleanup_scatter(struct ath6kl *ar)
+{
+	/*
+	 * USB doesn't support it. Just return.
+	 */
+	return;
+}
+
 static const struct ath6kl_hif_ops ath6kl_usb_ops = {
 	.diag_read32 = ath6kl_usb_diag_read32,
 	.diag_write32 = ath6kl_usb_diag_write32,
@@ -1049,6 +1057,7 @@ static const struct ath6kl_hif_ops ath6kl_usb_ops = {
 	.pipe_get_default = ath6kl_usb_get_default_pipe,
 	.pipe_map_service = ath6kl_usb_map_service_pipe,
 	.pipe_get_free_queue_number = ath6kl_usb_get_free_queue_number,
+	.cleanup_scatter = ath6kl_usb_cleanup_scatter,
 };
 
 /* ath6kl usb driver registered functions */
@@ -1208,3 +1217,6 @@ MODULE_FIRMWARE(AR6004_HW_1_0_DEFAULT_BOARD_DATA_FILE);
 MODULE_FIRMWARE(AR6004_HW_1_1_FIRMWARE_FILE);
 MODULE_FIRMWARE(AR6004_HW_1_1_BOARD_DATA_FILE);
 MODULE_FIRMWARE(AR6004_HW_1_1_DEFAULT_BOARD_DATA_FILE);
+MODULE_FIRMWARE(AR6004_HW_1_2_FIRMWARE_FILE);
+MODULE_FIRMWARE(AR6004_HW_1_2_BOARD_DATA_FILE);
+MODULE_FIRMWARE(AR6004_HW_1_2_DEFAULT_BOARD_DATA_FILE);
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c
index 7c8a9977faf..ee8ec2394c2 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.c
+++ b/drivers/net/wireless/ath/ath6kl/wmi.c
@@ -16,6 +16,7 @@
  */
 
 #include <linux/ip.h>
+#include <linux/in.h>
 #include "core.h"
 #include "debug.h"
 #include "testmode.h"
@@ -289,6 +290,13 @@ int ath6kl_wmi_implicit_create_pstream(struct wmi *wmi, u8 if_idx,
 					layer2_priority);
 		} else
 			usr_pri = layer2_priority & 0x7;
+
+		/*
+		 * Queue the EAPOL frames in the same WMM_AC_VO queue
+		 * as that of management frames.
+		 */
+		if (skb->protocol == cpu_to_be16(ETH_P_PAE))
+			usr_pri = WMI_VOICE_USER_PRIORITY;
 	}
 
 	/*
@@ -460,8 +468,9 @@ static int ath6kl_wmi_remain_on_chnl_event_rx(struct wmi *wmi, u8 *datap,
 		   freq, dur);
 	chan = ieee80211_get_channel(ar->wiphy, freq);
 	if (!chan) {
-		ath6kl_dbg(ATH6KL_DBG_WMI, "remain_on_chnl: Unknown channel "
-			   "(freq=%u)\n", freq);
+		ath6kl_dbg(ATH6KL_DBG_WMI,
+			   "remain_on_chnl: Unknown channel (freq=%u)\n",
+			   freq);
 		return -EINVAL;
 	}
 	id = vif->last_roc_id;
@@ -488,12 +497,14 @@ static int ath6kl_wmi_cancel_remain_on_chnl_event_rx(struct wmi *wmi,
 	ev = (struct wmi_cancel_remain_on_chnl_event *) datap;
 	freq = le32_to_cpu(ev->freq);
 	dur = le32_to_cpu(ev->duration);
-	ath6kl_dbg(ATH6KL_DBG_WMI, "cancel_remain_on_chnl: freq=%u dur=%u "
-		   "status=%u\n", freq, dur, ev->status);
+	ath6kl_dbg(ATH6KL_DBG_WMI,
+		   "cancel_remain_on_chnl: freq=%u dur=%u status=%u\n",
+		   freq, dur, ev->status);
 	chan = ieee80211_get_channel(ar->wiphy, freq);
 	if (!chan) {
-		ath6kl_dbg(ATH6KL_DBG_WMI, "cancel_remain_on_chnl: Unknown "
-			   "channel (freq=%u)\n", freq);
+		ath6kl_dbg(ATH6KL_DBG_WMI,
+			   "cancel_remain_on_chnl: Unknown channel (freq=%u)\n",
+			   freq);
 		return -EINVAL;
 	}
 	if (vif->last_cancel_roc_id &&
@@ -548,12 +559,12 @@ static int ath6kl_wmi_rx_probe_req_event_rx(struct wmi *wmi, u8 *datap, int len,
 	freq = le32_to_cpu(ev->freq);
 	dlen = le16_to_cpu(ev->len);
 	if (datap + len < ev->data + dlen) {
-		ath6kl_err("invalid wmi_p2p_rx_probe_req_event: "
-			   "len=%d dlen=%u\n", len, dlen);
+		ath6kl_err("invalid wmi_p2p_rx_probe_req_event: len=%d dlen=%u\n",
+			   len, dlen);
 		return -EINVAL;
 	}
-	ath6kl_dbg(ATH6KL_DBG_WMI, "rx_probe_req: len=%u freq=%u "
-		   "probe_req_report=%d\n",
+	ath6kl_dbg(ATH6KL_DBG_WMI,
+		   "rx_probe_req: len=%u freq=%u probe_req_report=%d\n",
 		   dlen, freq, vif->probe_req_report);
 
 	if (vif->probe_req_report || vif->nw_type == AP_NETWORK)
@@ -592,8 +603,8 @@ static int ath6kl_wmi_rx_action_event_rx(struct wmi *wmi, u8 *datap, int len,
 	freq = le32_to_cpu(ev->freq);
 	dlen = le16_to_cpu(ev->len);
 	if (datap + len < ev->data + dlen) {
-		ath6kl_err("invalid wmi_rx_action_event: "
-			   "len=%d dlen=%u\n", len, dlen);
+		ath6kl_err("invalid wmi_rx_action_event: len=%d dlen=%u\n",
+			   len, dlen);
 		return -EINVAL;
 	}
 	ath6kl_dbg(ATH6KL_DBG_WMI, "rx_action: len=%u freq=%u\n", dlen, freq);
@@ -687,7 +698,7 @@ static int ath6kl_wmi_ready_event_rx(struct wmi *wmi, u8 *datap, int len)
 
 	ath6kl_ready_event(wmi->parent_dev, ev->mac_addr,
 			   le32_to_cpu(ev->sw_version),
-			   le32_to_cpu(ev->abi_version));
+			   le32_to_cpu(ev->abi_version), ev->phy_cap);
 
 	return 0;
 }
@@ -777,16 +788,15 @@ static int ath6kl_wmi_connect_event_rx(struct wmi *wmi, u8 *datap, int len,
 		/* AP mode start/STA connected event */
 		struct net_device *dev = vif->ndev;
 		if (memcmp(dev->dev_addr, ev->u.ap_bss.bssid, ETH_ALEN) == 0) {
-			ath6kl_dbg(ATH6KL_DBG_WMI, "%s: freq %d bssid %pM "
-				   "(AP started)\n",
+			ath6kl_dbg(ATH6KL_DBG_WMI,
+				   "%s: freq %d bssid %pM (AP started)\n",
 				   __func__, le16_to_cpu(ev->u.ap_bss.ch),
 				   ev->u.ap_bss.bssid);
 			ath6kl_connect_ap_mode_bss(
 				vif, le16_to_cpu(ev->u.ap_bss.ch));
 		} else {
-			ath6kl_dbg(ATH6KL_DBG_WMI, "%s: aid %u mac_addr %pM "
-				   "auth=%u keymgmt=%u cipher=%u apsd_info=%u "
-				   "(STA connected)\n",
+			ath6kl_dbg(ATH6KL_DBG_WMI,
+				   "%s: aid %u mac_addr %pM auth=%u keymgmt=%u cipher=%u apsd_info=%u (STA connected)\n",
 				   __func__, ev->u.ap_sta.aid,
 				   ev->u.ap_sta.mac_addr,
 				   ev->u.ap_sta.auth,
@@ -1229,8 +1239,9 @@ static int ath6kl_wmi_neighbor_report_event_rx(struct wmi *wmi, u8 *datap,
 	ev = (struct wmi_neighbor_report_event *) datap;
 	if (sizeof(*ev) + ev->num_neighbors * sizeof(struct wmi_neighbor_info)
 	    > len) {
-		ath6kl_dbg(ATH6KL_DBG_WMI, "truncated neighbor event "
-			   "(num=%d len=%d)\n", ev->num_neighbors, len);
+		ath6kl_dbg(ATH6KL_DBG_WMI,
+			   "truncated neighbor event (num=%d len=%d)\n",
+			   ev->num_neighbors, len);
 		return -EINVAL;
 	}
 	for (i = 0; i < ev->num_neighbors; i++) {
@@ -1814,12 +1825,14 @@ int ath6kl_wmi_beginscan_cmd(struct wmi *wmi, u8 if_idx,
 			     u32 home_dwell_time, u32 force_scan_interval,
 			     s8 num_chan, u16 *ch_list, u32 no_cck, u32 *rates)
 {
+	struct ieee80211_supported_band *sband;
 	struct sk_buff *skb;
 	struct wmi_begin_scan_cmd *sc;
-	s8 size;
+	s8 size, *supp_rates;
 	int i, band, ret;
 	struct ath6kl *ar = wmi->parent_dev;
 	int num_rates;
+	u32 ratemask;
 
 	size = sizeof(struct wmi_begin_scan_cmd);
 
@@ -1846,10 +1859,13 @@ int ath6kl_wmi_beginscan_cmd(struct wmi *wmi, u8 if_idx,
 	sc->num_ch = num_chan;
 
 	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
-		struct ieee80211_supported_band *sband =
-		    ar->wiphy->bands[band];
-		u32 ratemask = rates[band];
-		u8 *supp_rates = sc->supp_rates[band].rates;
+		sband = ar->wiphy->bands[band];
+
+		if (!sband)
+			continue;
+
+		ratemask = rates[band];
+		supp_rates = sc->supp_rates[band].rates;
 		num_rates = 0;
 
 		for (i = 0; i < sband->n_bitrates; i++) {
@@ -2129,8 +2145,8 @@ int ath6kl_wmi_addkey_cmd(struct wmi *wmi, u8 if_idx, u8 key_index,
 	struct wmi_add_cipher_key_cmd *cmd;
 	int ret;
 
-	ath6kl_dbg(ATH6KL_DBG_WMI, "addkey cmd: key_index=%u key_type=%d "
-		   "key_usage=%d key_len=%d key_op_ctrl=%d\n",
+	ath6kl_dbg(ATH6KL_DBG_WMI,
+		   "addkey cmd: key_index=%u key_type=%d key_usage=%d key_len=%d key_op_ctrl=%d\n",
 		   key_index, key_type, key_usage, key_len, key_op_ctrl);
 
 	if ((key_index > WMI_MAX_KEY_INDEX) || (key_len > WMI_MAX_KEY_LEN) ||
@@ -3047,8 +3063,8 @@ int ath6kl_wmi_ap_profile_commit(struct wmi *wmip, u8 if_idx,
 
 	res = ath6kl_wmi_cmd_send(wmip, if_idx, skb, WMI_AP_CONFIG_COMMIT_CMDID,
 				  NO_SYNC_WMIFLAG);
-	ath6kl_dbg(ATH6KL_DBG_WMI, "%s: nw_type=%u auth_mode=%u ch=%u "
-		   "ctrl_flags=0x%x-> res=%d\n",
+	ath6kl_dbg(ATH6KL_DBG_WMI,
+		   "%s: nw_type=%u auth_mode=%u ch=%u ctrl_flags=0x%x-> res=%d\n",
 		   __func__, p->nw_type, p->auth_mode, le16_to_cpu(p->ch),
 		   le32_to_cpu(p->ctrl_flags), res);
 	return res;
@@ -3208,8 +3224,9 @@ int ath6kl_wmi_set_appie_cmd(struct wmi *wmi, u8 if_idx, u8 mgmt_frm_type,
 	if (!skb)
 		return -ENOMEM;
 
-	ath6kl_dbg(ATH6KL_DBG_WMI, "set_appie_cmd: mgmt_frm_type=%u "
-		   "ie_len=%u\n", mgmt_frm_type, ie_len);
+	ath6kl_dbg(ATH6KL_DBG_WMI,
+		   "set_appie_cmd: mgmt_frm_type=%u ie_len=%u\n",
+		   mgmt_frm_type, ie_len);
 	p = (struct wmi_set_appie_cmd *) skb->data;
 	p->mgmt_frm_type = mgmt_frm_type;
 	p->ie_len = ie_len;
@@ -3310,8 +3327,9 @@ static int ath6kl_wmi_send_action_cmd(struct wmi *wmi, u8 if_idx, u32 id,
 	wmi->last_mgmt_tx_frame = buf;
 	wmi->last_mgmt_tx_frame_len = data_len;
 
-	ath6kl_dbg(ATH6KL_DBG_WMI, "send_action_cmd: id=%u freq=%u wait=%u "
-		   "len=%u\n", id, freq, wait, data_len);
+	ath6kl_dbg(ATH6KL_DBG_WMI,
+		   "send_action_cmd: id=%u freq=%u wait=%u len=%u\n",
+		   id, freq, wait, data_len);
 	p = (struct wmi_send_action_cmd *) skb->data;
 	p->id = cpu_to_le32(id);
 	p->freq = cpu_to_le32(freq);
@@ -3348,8 +3366,9 @@ static int __ath6kl_wmi_send_mgmt_cmd(struct wmi *wmi, u8 if_idx, u32 id,
 	wmi->last_mgmt_tx_frame = buf;
 	wmi->last_mgmt_tx_frame_len = data_len;
 
-	ath6kl_dbg(ATH6KL_DBG_WMI, "send_action_cmd: id=%u freq=%u wait=%u "
-		   "len=%u\n", id, freq, wait, data_len);
+	ath6kl_dbg(ATH6KL_DBG_WMI,
+		   "send_action_cmd: id=%u freq=%u wait=%u len=%u\n",
+		   id, freq, wait, data_len);
 	p = (struct wmi_send_mgmt_cmd *) skb->data;
 	p->id = cpu_to_le32(id);
 	p->freq = cpu_to_le32(freq);
@@ -3402,8 +3421,9 @@ int ath6kl_wmi_send_probe_response_cmd(struct wmi *wmi, u8 if_idx, u32 freq,
 	if (!skb)
 		return -ENOMEM;
 
-	ath6kl_dbg(ATH6KL_DBG_WMI, "send_probe_response_cmd: freq=%u dst=%pM "
-		   "len=%u\n", freq, dst, data_len);
+	ath6kl_dbg(ATH6KL_DBG_WMI,
+		   "send_probe_response_cmd: freq=%u dst=%pM len=%u\n",
+		   freq, dst, data_len);
 	p = (struct wmi_p2p_probe_response_cmd *) skb->data;
 	p->freq = cpu_to_le32(freq);
 	memcpy(p->destination_addr, dst, ETH_ALEN);
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.h b/drivers/net/wireless/ath/ath6kl/wmi.h
index d3d2ab5c168..9076bec3a2b 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.h
+++ b/drivers/net/wireless/ath/ath6kl/wmi.h
@@ -106,6 +106,8 @@ struct wmi_data_sync_bufs {
 #define WMM_AC_VI   2		/* video */
 #define WMM_AC_VO   3		/* voice */
 
+#define WMI_VOICE_USER_PRIORITY		0x7
+
 struct wmi {
 	u16 stream_exist_for_ac[WMM_NUM_AC];
 	u8 fat_pipe_exist;
@@ -1151,6 +1153,7 @@ enum wmi_phy_mode {
 	WMI_11AG_MODE = 0x3,
 	WMI_11B_MODE = 0x4,
 	WMI_11GONLY_MODE = 0x5,
+	WMI_11G_HT20	= 0x6,
 };
 
 #define WMI_MAX_CHANNELS        32
@@ -1416,6 +1419,16 @@ struct wmi_ready_event_2 {
 	u8 phy_cap;
 } __packed;
 
+/* WMI_PHY_CAPABILITY */
+enum wmi_phy_cap {
+	WMI_11A_CAP = 0x01,
+	WMI_11G_CAP = 0x02,
+	WMI_11AG_CAP = 0x03,
+	WMI_11AN_CAP = 0x04,
+	WMI_11GN_CAP = 0x05,
+	WMI_11AGN_CAP = 0x06,
+};
+
 /* Connect Event */
 struct wmi_connect_event {
 	union {
@@ -1468,6 +1481,17 @@ enum wmi_disconnect_reason {
 	IBSS_MERGE = 0xe,
 };
 
+/* AP mode disconnect proto_reasons */
+enum ap_disconnect_reason {
+	WMI_AP_REASON_STA_LEFT		= 101,
+	WMI_AP_REASON_FROM_HOST		= 102,
+	WMI_AP_REASON_COMM_TIMEOUT	= 103,
+	WMI_AP_REASON_MAX_STA		= 104,
+	WMI_AP_REASON_ACL		= 105,
+	WMI_AP_REASON_STA_ROAM		= 106,
+	WMI_AP_REASON_DFS_CHANNEL	= 107,
+};
+
 #define ATH6KL_COUNTRY_RD_SHIFT        16
 
 struct ath6kl_wmi_regdomain {
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index a0387a027db..9fdd70fcaf5 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -892,34 +892,6 @@ static void ar9003_hw_tx_iq_cal_reload(struct ath_hw *ah)
 		      AR_PHY_RX_IQCAL_CORR_B0_LOOPBACK_IQCORR_EN, 0x1);
 }
 
-static bool ar9003_hw_rtt_restore(struct ath_hw *ah, struct ath9k_channel *chan)
-{
-	struct ath9k_rtt_hist *hist;
-	u32 *table;
-	int i;
-	bool restore;
-
-	if (!ah->caldata)
-		return false;
-
-	hist = &ah->caldata->rtt_hist;
-	if (!hist->num_readings)
-		return false;
-
-	ar9003_hw_rtt_enable(ah);
-	ar9003_hw_rtt_set_mask(ah, 0x00);
-	for (i = 0; i < AR9300_MAX_CHAINS; i++) {
-		if (!(ah->rxchainmask & (1 << i)))
-			continue;
-		table = &hist->table[i][hist->num_readings][0];
-		ar9003_hw_rtt_load_hist(ah, i, table);
-	}
-	restore = ar9003_hw_rtt_force_restore(ah);
-	ar9003_hw_rtt_disable(ah);
-
-	return restore;
-}
-
 static bool ar9003_hw_init_cal(struct ath_hw *ah,
 			       struct ath9k_channel *chan)
 {
@@ -942,9 +914,10 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah,
 		if (!ar9003_hw_rtt_restore(ah, chan))
 			run_rtt_cal = true;
 
-		ath_dbg(common, CALIBRATE, "RTT restore %s\n",
-			run_rtt_cal ? "failed" : "succeed");
+		if (run_rtt_cal)
+			ath_dbg(common, CALIBRATE, "RTT calibration to be done\n");
 	}
+
 	run_agc_cal = run_rtt_cal;
 
 	if (run_rtt_cal) {
@@ -1069,17 +1042,14 @@ skip_tx_iqcal:
 #undef CL_TAB_ENTRY
 
 	if (run_rtt_cal && caldata) {
-		struct ath9k_rtt_hist *hist = &caldata->rtt_hist;
-		if (is_reusable && (hist->num_readings < RTT_HIST_MAX)) {
-			u32 *table;
+		if (is_reusable) {
+			if (!ath9k_hw_rfbus_req(ah))
+				ath_err(ath9k_hw_common(ah),
+					"Could not stop baseband\n");
+			else
+				ar9003_hw_rtt_fill_hist(ah);
 
-			hist->num_readings++;
-			for (i = 0; i < AR9300_MAX_CHAINS; i++) {
-				if (!(ah->rxchainmask & (1 << i)))
-					continue;
-				table = &hist->table[i][hist->num_readings][0];
-				ar9003_hw_rtt_fill_hist(ah, i, table);
-			}
+			ath9k_hw_rfbus_done(ah);
 		}
 
 		ar9003_hw_rtt_disable(ah);
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
index 3cac293a284..ffbb180f91e 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
@@ -756,7 +756,7 @@ int ar9003_mci_end_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 		if (caldata) {
 			caldata->done_txiqcal_once = false;
 			caldata->done_txclcal_once = false;
-			caldata->rtt_hist.num_readings = 0;
+			caldata->rtt_done = false;
 		}
 
 		if (!ath9k_hw_init_cal(ah, chan))
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_rtt.c b/drivers/net/wireless/ath/ath9k/ar9003_rtt.c
index 458bedf0b0a..74de3539c2c 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_rtt.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_rtt.c
@@ -15,6 +15,7 @@
  */
 
 #include "hw.h"
+#include "hw-ops.h"
 #include "ar9003_phy.h"
 #include "ar9003_rtt.h"
 
@@ -69,7 +70,7 @@ bool ar9003_hw_rtt_force_restore(struct ath_hw *ah)
 }
 
 static void ar9003_hw_rtt_load_hist_entry(struct ath_hw *ah, u8 chain,
-		u32 index, u32 data28)
+					  u32 index, u32 data28)
 {
 	u32 val;
 
@@ -100,12 +101,21 @@ static void ar9003_hw_rtt_load_hist_entry(struct ath_hw *ah, u8 chain,
 		      RTT_ACCESS_TIMEOUT);
 }
 
-void ar9003_hw_rtt_load_hist(struct ath_hw *ah, u8 chain, u32 *table)
+void ar9003_hw_rtt_load_hist(struct ath_hw *ah)
 {
-	int i;
+	int chain, i;
 
-	for (i = 0; i < MAX_RTT_TABLE_ENTRY; i++)
-		ar9003_hw_rtt_load_hist_entry(ah, chain, i, table[i]);
+	for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) {
+		if (!(ah->rxchainmask & (1 << chain)))
+			continue;
+		for (i = 0; i < MAX_RTT_TABLE_ENTRY; i++) {
+			ar9003_hw_rtt_load_hist_entry(ah, chain, i,
+					      ah->caldata->rtt_table[chain][i]);
+			ath_dbg(ath9k_hw_common(ah), CALIBRATE,
+				"Load RTT value at idx %d, chain %d: 0x%x\n",
+				i, chain, ah->caldata->rtt_table[chain][i]);
+		}
+	}
 }
 
 static int ar9003_hw_rtt_fill_hist_entry(struct ath_hw *ah, u8 chain, u32 index)
@@ -128,27 +138,71 @@ static int ar9003_hw_rtt_fill_hist_entry(struct ath_hw *ah, u8 chain, u32 index)
 			   RTT_ACCESS_TIMEOUT))
 		return RTT_BAD_VALUE;
 
-	val = REG_READ(ah, AR_PHY_RTT_TABLE_SW_INTF_1_B(chain));
+	val = MS(REG_READ(ah, AR_PHY_RTT_TABLE_SW_INTF_1_B(chain)),
+		 AR_PHY_RTT_SW_RTT_TABLE_DATA);
+
 
 	return val;
 }
 
-void ar9003_hw_rtt_fill_hist(struct ath_hw *ah, u8 chain, u32 *table)
+void ar9003_hw_rtt_fill_hist(struct ath_hw *ah)
 {
-	int i;
+	int chain, i;
+
+	for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) {
+		if (!(ah->rxchainmask & (1 << chain)))
+			continue;
+		for (i = 0; i < MAX_RTT_TABLE_ENTRY; i++) {
+			ah->caldata->rtt_table[chain][i] =
+				ar9003_hw_rtt_fill_hist_entry(ah, chain, i);
+			ath_dbg(ath9k_hw_common(ah), CALIBRATE,
+				"RTT value at idx %d, chain %d is: 0x%x\n",
+				i, chain, ah->caldata->rtt_table[chain][i]);
+		}
+	}
 
-	for (i = 0; i < MAX_RTT_TABLE_ENTRY; i++)
-		table[i] = ar9003_hw_rtt_fill_hist_entry(ah, chain, i);
+	ah->caldata->rtt_done = true;
 }
 
 void ar9003_hw_rtt_clear_hist(struct ath_hw *ah)
 {
-	int i, j;
+	int chain, i;
 
-	for (i = 0; i < AR9300_MAX_CHAINS; i++) {
-		if (!(ah->rxchainmask & (1 << i)))
+	for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) {
+		if (!(ah->rxchainmask & (1 << chain)))
 			continue;
-		for (j = 0; j < MAX_RTT_TABLE_ENTRY; j++)
-			ar9003_hw_rtt_load_hist_entry(ah, i, j, 0);
+		for (i = 0; i < MAX_RTT_TABLE_ENTRY; i++)
+			ar9003_hw_rtt_load_hist_entry(ah, chain, i, 0);
 	}
+
+	if (ah->caldata)
+		ah->caldata->rtt_done = false;
+}
+
+bool ar9003_hw_rtt_restore(struct ath_hw *ah, struct ath9k_channel *chan)
+{
+	bool restore;
+
+	if (!ah->caldata)
+		return false;
+
+	if (!ah->caldata->rtt_done)
+		return false;
+
+	ar9003_hw_rtt_enable(ah);
+	ar9003_hw_rtt_set_mask(ah, 0x10);
+
+	if (!ath9k_hw_rfbus_req(ah)) {
+		ath_err(ath9k_hw_common(ah), "Could not stop baseband\n");
+		restore = false;
+		goto fail;
+	}
+
+	ar9003_hw_rtt_load_hist(ah);
+	restore = ar9003_hw_rtt_force_restore(ah);
+
+fail:
+	ath9k_hw_rfbus_done(ah);
+	ar9003_hw_rtt_disable(ah);
+	return restore;
 }
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_rtt.h b/drivers/net/wireless/ath/ath9k/ar9003_rtt.h
index 030758d087d..a43b30d723a 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_rtt.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_rtt.h
@@ -21,8 +21,9 @@ void ar9003_hw_rtt_enable(struct ath_hw *ah);
 void ar9003_hw_rtt_disable(struct ath_hw *ah);
 void ar9003_hw_rtt_set_mask(struct ath_hw *ah, u32 rtt_mask);
 bool ar9003_hw_rtt_force_restore(struct ath_hw *ah);
-void ar9003_hw_rtt_load_hist(struct ath_hw *ah, u8 chain, u32 *table);
-void ar9003_hw_rtt_fill_hist(struct ath_hw *ah, u8 chain, u32 *table);
+void ar9003_hw_rtt_load_hist(struct ath_hw *ah);
+void ar9003_hw_rtt_fill_hist(struct ath_hw *ah);
 void ar9003_hw_rtt_clear_hist(struct ath_hw *ah);
+bool ar9003_hw_rtt_restore(struct ath_hw *ah, struct ath9k_channel *chan);
 
 #endif
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index f84477c5ebb..abe05ec85d5 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1702,10 +1702,10 @@ static int ath9k_hw_do_fastcc(struct ath_hw *ah, struct ath9k_channel *chan)
 	 * For AR9462, make sure that calibration data for
 	 * re-using are present.
 	 */
-	if (AR_SREV_9462(ah) && (!ah->caldata ||
-				 !ah->caldata->done_txiqcal_once ||
-				 !ah->caldata->done_txclcal_once ||
-				 !ah->caldata->rtt_hist.num_readings))
+	if (AR_SREV_9462(ah) && (ah->caldata &&
+				 (!ah->caldata->done_txiqcal_once ||
+				  !ah->caldata->done_txclcal_once ||
+				  !ah->caldata->rtt_done)))
 		goto fail;
 
 	ath_dbg(common, RESET, "FastChannelChange for %d -> %d\n",
@@ -1941,7 +1941,6 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	if (caldata) {
 		caldata->done_txiqcal_once = false;
 		caldata->done_txclcal_once = false;
-		caldata->rtt_hist.num_readings = 0;
 	}
 	if (!ath9k_hw_init_cal(ah, chan))
 		return -EIO;
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 828b9bbc456..b620c557c2a 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -348,12 +348,6 @@ enum ath9k_int {
 	 CHANNEL_HT40MINUS)
 
 #define MAX_RTT_TABLE_ENTRY     6
-#define RTT_HIST_MAX            3
-struct ath9k_rtt_hist {
-	u32 table[AR9300_MAX_CHAINS][RTT_HIST_MAX][MAX_RTT_TABLE_ENTRY];
-	u8 num_readings;
-};
-
 #define MAX_IQCAL_MEASUREMENT	8
 #define MAX_CL_TAB_ENTRY	16
 
@@ -363,6 +357,7 @@ struct ath9k_hw_cal_data {
 	int32_t CalValid;
 	int8_t iCoff;
 	int8_t qCoff;
+	bool rtt_done;
 	bool paprd_done;
 	bool nfcal_pending;
 	bool nfcal_interference;
@@ -373,8 +368,8 @@ struct ath9k_hw_cal_data {
 	u32 num_measures[AR9300_MAX_CHAINS];
 	int tx_corr_coeff[MAX_IQCAL_MEASUREMENT][AR9300_MAX_CHAINS];
 	u32 tx_clcal[AR9300_MAX_CHAINS][MAX_CL_TAB_ENTRY];
+	u32 rtt_table[AR9300_MAX_CHAINS][MAX_RTT_TABLE_ENTRY];
 	struct ath9k_nfcal_hist nfCalHist[NUM_NF_READINGS];
-	struct ath9k_rtt_hist rtt_hist;
 };
 
 struct ath9k_channel {
diff --git a/drivers/net/wireless/b43/bus.c b/drivers/net/wireless/b43/bus.c
index 424692df239..565fdbdd691 100644
--- a/drivers/net/wireless/b43/bus.c
+++ b/drivers/net/wireless/b43/bus.c
@@ -107,11 +107,9 @@ struct b43_bus_dev *b43_bus_dev_bcma_init(struct bcma_device *core)
 	dev->dma_dev = core->dma_dev;
 	dev->irq = core->irq;
 
-	/*
 	dev->board_vendor = core->bus->boardinfo.vendor;
 	dev->board_type = core->bus->boardinfo.type;
-	dev->board_rev = core->bus->boardinfo.rev;
-	*/
+	dev->board_rev = core->bus->sprom.board_rev;
 
 	dev->chip_id = core->bus->chipinfo.id;
 	dev->chip_rev = core->bus->chipinfo.rev;
@@ -210,7 +208,7 @@ struct b43_bus_dev *b43_bus_dev_ssb_init(struct ssb_device *sdev)
 
 	dev->board_vendor = sdev->bus->boardinfo.vendor;
 	dev->board_type = sdev->bus->boardinfo.type;
-	dev->board_rev = sdev->bus->boardinfo.rev;
+	dev->board_rev = sdev->bus->sprom.board_rev;
 
 	dev->chip_id = sdev->bus->chip_id;
 	dev->chip_rev = sdev->bus->chip_rev;
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index b5f1b91002b..777cd74921d 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -1109,7 +1109,7 @@ static bool b43_dma_translation_in_low_word(struct b43_wldev *dev,
 #ifdef CONFIG_B43_SSB
 	if (dev->dev->bus_type == B43_BUS_SSB &&
 	    dev->dev->sdev->bus->bustype == SSB_BUSTYPE_PCI &&
-	    !(dev->dev->sdev->bus->host_pci->is_pcie &&
+	    !(pci_is_pcie(dev->dev->sdev->bus->host_pci) &&
 	      ssb_read32(dev->dev->sdev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64))
 			return 1;
 #endif
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 617afc8211b..5a39b226b2e 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -5243,10 +5243,10 @@ static void b43_sprom_fixup(struct ssb_bus *bus)
 
 	/* boardflags workarounds */
 	if (bus->boardinfo.vendor == SSB_BOARDVENDOR_DELL &&
-	    bus->chip_id == 0x4301 && bus->boardinfo.rev == 0x74)
+	    bus->chip_id == 0x4301 && bus->sprom.board_rev == 0x74)
 		bus->sprom.boardflags_lo |= B43_BFL_BTCOEXIST;
 	if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE &&
-	    bus->boardinfo.type == 0x4E && bus->boardinfo.rev > 0x40)
+	    bus->boardinfo.type == 0x4E && bus->sprom.board_rev > 0x40)
 		bus->sprom.boardflags_lo |= B43_BFL_PACTRL;
 	if (bus->bustype == SSB_BUSTYPE_PCI) {
 		pdev = bus->host_pci;
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index 1be214b815f..cd9c9bc186d 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -1573,8 +1573,6 @@ static void b43legacy_request_firmware(struct work_struct *work)
 	const char *filename;
 	int err;
 
-	/* do dummy read */
-	ssb_read32(dev->dev, SSB_TMSHIGH);
 	if (!fw->ucode) {
 		if (rev == 2)
 			filename = "ucode2";
@@ -3781,7 +3779,7 @@ static void b43legacy_sprom_fixup(struct ssb_bus *bus)
 	/* boardflags workarounds */
 	if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE &&
 	    bus->boardinfo.type == 0x4E &&
-	    bus->boardinfo.rev > 0x40)
+	    bus->sprom.board_rev > 0x40)
 		bus->sprom.boardflags_lo |= B43legacy_BFL_PACTRL;
 }
 
diff --git a/drivers/net/wireless/b43legacy/phy.c b/drivers/net/wireless/b43legacy/phy.c
index 950334197f4..995c7d0c212 100644
--- a/drivers/net/wireless/b43legacy/phy.c
+++ b/drivers/net/wireless/b43legacy/phy.c
@@ -408,7 +408,7 @@ static void b43legacy_phy_setupg(struct b43legacy_wldev *dev)
 
 		if (is_bcm_board_vendor(dev) &&
 		    (dev->dev->bus->boardinfo.type == 0x0416) &&
-		    (dev->dev->bus->boardinfo.rev == 0x0017))
+		    (dev->dev->bus->sprom.board_rev == 0x0017))
 			return;
 
 		b43legacy_ilt_write(dev, 0x5001, 0x0002);
@@ -424,7 +424,7 @@ static void b43legacy_phy_setupg(struct b43legacy_wldev *dev)
 
 		if (is_bcm_board_vendor(dev) &&
 		    (dev->dev->bus->boardinfo.type == 0x0416) &&
-		    (dev->dev->bus->boardinfo.rev == 0x0017))
+		    (dev->dev->bus->sprom.board_rev == 0x0017))
 			return;
 
 		b43legacy_ilt_write(dev, 0x0401, 0x0002);
diff --git a/drivers/net/wireless/b43legacy/radio.c b/drivers/net/wireless/b43legacy/radio.c
index fcbafcd603c..89617769039 100644
--- a/drivers/net/wireless/b43legacy/radio.c
+++ b/drivers/net/wireless/b43legacy/radio.c
@@ -1998,7 +1998,7 @@ u16 b43legacy_default_radio_attenuation(struct b43legacy_wldev *dev)
 			if (phy->type == B43legacy_PHYTYPE_G) {
 				if (is_bcm_board_vendor(dev) &&
 				    dev->dev->bus->boardinfo.type == 0x421 &&
-				    dev->dev->bus->boardinfo.rev >= 30)
+				    dev->dev->bus->sprom.board_rev >= 30)
 					att = 3;
 				else if (is_bcm_board_vendor(dev) &&
 					 dev->dev->bus->boardinfo.type == 0x416)
@@ -2008,7 +2008,7 @@ u16 b43legacy_default_radio_attenuation(struct b43legacy_wldev *dev)
 			} else {
 				if (is_bcm_board_vendor(dev) &&
 				    dev->dev->bus->boardinfo.type == 0x421 &&
-				    dev->dev->bus->boardinfo.rev >= 30)
+				    dev->dev->bus->sprom.board_rev >= 30)
 					att = 7;
 				else
 					att = 6;
@@ -2018,7 +2018,7 @@ u16 b43legacy_default_radio_attenuation(struct b43legacy_wldev *dev)
 			if (phy->type == B43legacy_PHYTYPE_G) {
 				if (is_bcm_board_vendor(dev) &&
 				    dev->dev->bus->boardinfo.type == 0x421 &&
-				    dev->dev->bus->boardinfo.rev >= 30)
+				    dev->dev->bus->sprom.board_rev >= 30)
 					att = 3;
 				else if (is_bcm_board_vendor(dev) &&
 					 dev->dev->bus->boardinfo.type ==
@@ -2052,9 +2052,9 @@ u16 b43legacy_default_radio_attenuation(struct b43legacy_wldev *dev)
 	}
 	if (is_bcm_board_vendor(dev) &&
 	    dev->dev->bus->boardinfo.type == 0x421) {
-		if (dev->dev->bus->boardinfo.rev < 0x43)
+		if (dev->dev->bus->sprom.board_rev < 0x43)
 			att = 2;
-		else if (dev->dev->bus->boardinfo.rev < 0x51)
+		else if (dev->dev->bus->sprom.board_rev < 0x51)
 			att = 3;
 	}
 	if (att == 0xFFFF)
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index 4add7da2468..e2480d19627 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -85,18 +85,15 @@ int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev)
 	sdiodev->irq_wake = true;
 
 	/* must configure SDIO_CCCR_IENx to enable irq */
-	data = brcmf_sdcard_cfg_read(sdiodev, SDIO_FUNC_0,
-				     SDIO_CCCR_IENx, &ret);
+	data = brcmf_sdio_regrb(sdiodev, SDIO_CCCR_IENx, &ret);
 	data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1;
-	brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_0, SDIO_CCCR_IENx,
-			       data, &ret);
+	brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, data, &ret);
 
 	/* redirect, configure ane enable io for interrupt signal */
 	data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE;
 	if (sdiodev->irq_flags | IRQF_TRIGGER_HIGH)
 		data |= SDIO_SEPINT_ACT_HI;
-	brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_0, SDIO_CCCR_BRCM_SEPINT,
-			       data, &ret);
+	brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret);
 
 	return 0;
 }
@@ -105,9 +102,8 @@ int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev)
 {
 	brcmf_dbg(TRACE, "Entering\n");
 
-	brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_0, SDIO_CCCR_BRCM_SEPINT,
-			       0, NULL);
-	brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_0, SDIO_CCCR_IENx, 0, NULL);
+	brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL);
+	brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, 0, NULL);
 
 	if (sdiodev->irq_wake) {
 		disable_irq_wake(sdiodev->irq);
@@ -158,153 +154,147 @@ int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev)
 }
 #endif		/* CONFIG_BRCMFMAC_SDIO_OOB */
 
-u8 brcmf_sdcard_cfg_read(struct brcmf_sdio_dev *sdiodev, uint fnc_num, u32 addr,
-			 int *err)
-{
-	int status;
-	s32 retry = 0;
-	u8 data = 0;
-
-	do {
-		if (retry)	/* wait for 1 ms till bus get settled down */
-			udelay(1000);
-		status = brcmf_sdioh_request_byte(sdiodev, SDIOH_READ, fnc_num,
-						  addr, (u8 *) &data);
-	} while (status != 0
-		 && (retry++ < SDIOH_API_ACCESS_RETRY_LIMIT));
-	if (err)
-		*err = status;
-
-	brcmf_dbg(INFO, "fun = %d, addr = 0x%x, u8data = 0x%x\n",
-		  fnc_num, addr, data);
-
-	return data;
-}
-
-void
-brcmf_sdcard_cfg_write(struct brcmf_sdio_dev *sdiodev, uint fnc_num, u32 addr,
-		       u8 data, int *err)
-{
-	int status;
-	s32 retry = 0;
-
-	do {
-		if (retry)	/* wait for 1 ms till bus get settled down */
-			udelay(1000);
-		status = brcmf_sdioh_request_byte(sdiodev, SDIOH_WRITE, fnc_num,
-						  addr, (u8 *) &data);
-	} while (status != 0
-		 && (retry++ < SDIOH_API_ACCESS_RETRY_LIMIT));
-	if (err)
-		*err = status;
-
-	brcmf_dbg(INFO, "fun = %d, addr = 0x%x, u8data = 0x%x\n",
-		  fnc_num, addr, data);
-}
-
 int
 brcmf_sdcard_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address)
 {
-	int err = 0;
-	brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_1, SBSDIO_FUNC1_SBADDRLOW,
-			 (address >> 8) & SBSDIO_SBADDRLOW_MASK, &err);
-	if (!err)
-		brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_1,
-				       SBSDIO_FUNC1_SBADDRMID,
-				       (address >> 16) & SBSDIO_SBADDRMID_MASK,
-				       &err);
-	if (!err)
-		brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_1,
-				       SBSDIO_FUNC1_SBADDRHIGH,
-				       (address >> 24) & SBSDIO_SBADDRHIGH_MASK,
-				       &err);
+	int err = 0, i;
+	u8 addr[3];
+	s32 retry;
+
+	addr[0] = (address >> 8) & SBSDIO_SBADDRLOW_MASK;
+	addr[1] = (address >> 16) & SBSDIO_SBADDRMID_MASK;
+	addr[2] = (address >> 24) & SBSDIO_SBADDRHIGH_MASK;
+
+	for (i = 0; i < 3; i++) {
+		retry = 0;
+		do {
+			if (retry)
+				usleep_range(1000, 2000);
+			err = brcmf_sdioh_request_byte(sdiodev, SDIOH_WRITE,
+					SDIO_FUNC_1, SBSDIO_FUNC1_SBADDRLOW + i,
+					&addr[i]);
+		} while (err != 0 && retry++ < SDIOH_API_ACCESS_RETRY_LIMIT);
+
+		if (err) {
+			brcmf_dbg(ERROR, "failed at addr:0x%0x\n",
+				  SBSDIO_FUNC1_SBADDRLOW + i);
+			break;
+		}
+	}
 
 	return err;
 }
 
-u32 brcmf_sdcard_reg_read(struct brcmf_sdio_dev *sdiodev, u32 addr, uint size)
+static int
+brcmf_sdio_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr,
+			void *data, bool write)
 {
-	int status;
-	u32 word = 0;
-	uint bar0 = addr & ~SBSDIO_SB_OFT_ADDR_MASK;
-
-	brcmf_dbg(INFO, "fun = 1, addr = 0x%x\n", addr);
-
-	if (bar0 != sdiodev->sbwad) {
-		if (brcmf_sdcard_set_sbaddr_window(sdiodev, bar0))
-			return 0xFFFFFFFF;
+	u8 func_num, reg_size;
+	u32 bar;
+	s32 retry = 0;
+	int ret;
 
-		sdiodev->sbwad = bar0;
+	/*
+	 * figure out how to read the register based on address range
+	 * 0x00 ~ 0x7FF: function 0 CCCR and FBR
+	 * 0x10000 ~ 0x1FFFF: function 1 miscellaneous registers
+	 * The rest: function 1 silicon backplane core registers
+	 */
+	if ((addr & ~REG_F0_REG_MASK) == 0) {
+		func_num = SDIO_FUNC_0;
+		reg_size = 1;
+	} else if ((addr & ~REG_F1_MISC_MASK) == 0) {
+		func_num = SDIO_FUNC_1;
+		reg_size = 1;
+	} else {
+		func_num = SDIO_FUNC_1;
+		reg_size = 4;
+
+		/* Set the window for SB core register */
+		bar = addr & ~SBSDIO_SB_OFT_ADDR_MASK;
+		if (bar != sdiodev->sbwad) {
+			ret = brcmf_sdcard_set_sbaddr_window(sdiodev, bar);
+			if (ret != 0) {
+				memset(data, 0xFF, reg_size);
+				return ret;
+			}
+			sdiodev->sbwad = bar;
+		}
+		addr &= SBSDIO_SB_OFT_ADDR_MASK;
+		addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
 	}
 
-	addr &= SBSDIO_SB_OFT_ADDR_MASK;
-	if (size == 4)
-		addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
+	do {
+		if (!write)
+			memset(data, 0, reg_size);
+		if (retry)	/* wait for 1 ms till bus get settled down */
+			usleep_range(1000, 2000);
+		if (reg_size == 1)
+			ret = brcmf_sdioh_request_byte(sdiodev, write,
+						       func_num, addr, data);
+		else
+			ret = brcmf_sdioh_request_word(sdiodev, write,
+						       func_num, addr, data, 4);
+	} while (ret != 0 && retry++ < SDIOH_API_ACCESS_RETRY_LIMIT);
 
-	status = brcmf_sdioh_request_word(sdiodev, SDIOH_READ, SDIO_FUNC_1,
-					  addr, &word, size);
+	if (ret != 0)
+		brcmf_dbg(ERROR, "failed with %d\n", ret);
 
-	sdiodev->regfail = (status != 0);
+	return ret;
+}
 
-	brcmf_dbg(INFO, "u32data = 0x%x\n", word);
+u8 brcmf_sdio_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
+{
+	u8 data;
+	int retval;
 
-	/* if ok, return appropriately masked word */
-	if (status == 0) {
-		switch (size) {
-		case sizeof(u8):
-			return word & 0xff;
-		case sizeof(u16):
-			return word & 0xffff;
-		case sizeof(u32):
-			return word;
-		default:
-			sdiodev->regfail = true;
+	brcmf_dbg(INFO, "addr:0x%08x\n", addr);
+	retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, false);
+	brcmf_dbg(INFO, "data:0x%02x\n", data);
 
-		}
-	}
+	if (ret)
+		*ret = retval;
 
-	/* otherwise, bad sdio access or invalid size */
-	brcmf_dbg(ERROR, "error reading addr 0x%04x size %d\n", addr, size);
-	return 0xFFFFFFFF;
+	return data;
 }
 
-u32 brcmf_sdcard_reg_write(struct brcmf_sdio_dev *sdiodev, u32 addr, uint size,
-			   u32 data)
+u32 brcmf_sdio_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
 {
-	int status;
-	uint bar0 = addr & ~SBSDIO_SB_OFT_ADDR_MASK;
-	int err = 0;
+	u32 data;
+	int retval;
 
-	brcmf_dbg(INFO, "fun = 1, addr = 0x%x, uint%ddata = 0x%x\n",
-		  addr, size * 8, data);
+	brcmf_dbg(INFO, "addr:0x%08x\n", addr);
+	retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, false);
+	brcmf_dbg(INFO, "data:0x%08x\n", data);
 
-	if (bar0 != sdiodev->sbwad) {
-		err = brcmf_sdcard_set_sbaddr_window(sdiodev, bar0);
-		if (err)
-			return err;
+	if (ret)
+		*ret = retval;
 
-		sdiodev->sbwad = bar0;
-	}
+	return data;
+}
 
-	addr &= SBSDIO_SB_OFT_ADDR_MASK;
-	if (size == 4)
-		addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
-	status =
-	    brcmf_sdioh_request_word(sdiodev, SDIOH_WRITE, SDIO_FUNC_1,
-				     addr, &data, size);
-	sdiodev->regfail = (status != 0);
+void brcmf_sdio_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr,
+		      u8 data, int *ret)
+{
+	int retval;
 
-	if (status == 0)
-		return 0;
+	brcmf_dbg(INFO, "addr:0x%08x, data:0x%02x\n", addr, data);
+	retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, true);
 
-	brcmf_dbg(ERROR, "error writing 0x%08x to addr 0x%04x size %d\n",
-		  data, addr, size);
-	return 0xFFFFFFFF;
+	if (ret)
+		*ret = retval;
 }
 
-bool brcmf_sdcard_regfail(struct brcmf_sdio_dev *sdiodev)
+void brcmf_sdio_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr,
+		      u32 data, int *ret)
 {
-	return sdiodev->regfail;
+	int retval;
+
+	brcmf_dbg(INFO, "addr:0x%08x, data:0x%08x\n", addr, data);
+	retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, true);
+
+	if (ret)
+		*ret = retval;
 }
 
 static int brcmf_sdcard_recv_prepare(struct brcmf_sdio_dev *sdiodev, uint fn,
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c
index dd07d33a927..82f51dbd0d6 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c
@@ -346,43 +346,17 @@ int brcmf_sdioh_request_buffer(struct brcmf_sdio_dev *sdiodev,
 	return status;
 }
 
-/* Read client card reg */
-static int
-brcmf_sdioh_card_regread(struct brcmf_sdio_dev *sdiodev, int func, u32 regaddr,
-			 int regsize, u32 *data)
-{
-
-	if ((func == 0) || (regsize == 1)) {
-		u8 temp = 0;
-
-		brcmf_sdioh_request_byte(sdiodev, SDIOH_READ, func, regaddr,
-					 &temp);
-		*data = temp;
-		*data &= 0xff;
-		brcmf_dbg(DATA, "byte read data=0x%02x\n", *data);
-	} else {
-		brcmf_sdioh_request_word(sdiodev, SDIOH_READ, func, regaddr,
-					 data, regsize);
-		if (regsize == 2)
-			*data &= 0xffff;
-
-		brcmf_dbg(DATA, "word read data=0x%08x\n", *data);
-	}
-
-	return SUCCESS;
-}
-
 static int brcmf_sdioh_get_cisaddr(struct brcmf_sdio_dev *sdiodev, u32 regaddr)
 {
 	/* read 24 bits and return valid 17 bit addr */
-	int i;
+	int i, ret;
 	u32 scratch, regdata;
 	__le32 scratch_le;
 	u8 *ptr = (u8 *)&scratch_le;
 
 	for (i = 0; i < 3; i++) {
-		if ((brcmf_sdioh_card_regread(sdiodev, 0, regaddr, 1,
-				&regdata)) != SUCCESS)
+		regdata = brcmf_sdio_regrl(sdiodev, regaddr, &ret);
+		if (ret != 0)
 			brcmf_dbg(ERROR, "Can't read!\n");
 
 		*ptr++ = (u8) regdata;
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 149ee67beb2..1dbf2be478c 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -629,43 +629,29 @@ static bool data_ok(struct brcmf_sdio *bus)
  * Reads a register in the SDIO hardware block. This block occupies a series of
  * adresses on the 32 bit backplane bus.
  */
-static void
-r_sdreg32(struct brcmf_sdio *bus, u32 *regvar, u32 reg_offset, u32 *retryvar)
+static int
+r_sdreg32(struct brcmf_sdio *bus, u32 *regvar, u32 offset)
 {
 	u8 idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV);
-	*retryvar = 0;
-	do {
-		*regvar = brcmf_sdcard_reg_read(bus->sdiodev,
-				bus->ci->c_inf[idx].base + reg_offset,
-				sizeof(u32));
-	} while (brcmf_sdcard_regfail(bus->sdiodev) &&
-		 (++(*retryvar) <= retry_limit));
-	if (*retryvar) {
-		bus->regfails += (*retryvar-1);
-		if (*retryvar > retry_limit) {
-			brcmf_dbg(ERROR, "FAILED READ %Xh\n", reg_offset);
-			*regvar = 0;
-		}
-	}
+	int ret;
+
+	*regvar = brcmf_sdio_regrl(bus->sdiodev,
+				   bus->ci->c_inf[idx].base + offset, &ret);
+
+	return ret;
 }
 
-static void
-w_sdreg32(struct brcmf_sdio *bus, u32 regval, u32 reg_offset, u32 *retryvar)
+static int
+w_sdreg32(struct brcmf_sdio *bus, u32 regval, u32 reg_offset)
 {
 	u8 idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV);
-	*retryvar = 0;
-	do {
-		brcmf_sdcard_reg_write(bus->sdiodev,
-				       bus->ci->c_inf[idx].base + reg_offset,
-				       sizeof(u32), regval);
-	} while (brcmf_sdcard_regfail(bus->sdiodev) &&
-		 (++(*retryvar) <= retry_limit));
-	if (*retryvar) {
-		bus->regfails += (*retryvar-1);
-		if (*retryvar > retry_limit)
-			brcmf_dbg(ERROR, "FAILED REGISTER WRITE %Xh\n",
-				  reg_offset);
-	}
+	int ret;
+
+	brcmf_sdio_regwl(bus->sdiodev,
+			 bus->ci->c_inf[idx].base + reg_offset,
+			 regval, &ret);
+
+	return ret;
 }
 
 #define PKT_AVAILABLE()		(intstatus & I_HMB_FRAME_IND)
@@ -697,16 +683,16 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
 		clkreq =
 		    bus->alp_only ? SBSDIO_ALP_AVAIL_REQ : SBSDIO_HT_AVAIL_REQ;
 
-		brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
-				       SBSDIO_FUNC1_CHIPCLKCSR, clkreq, &err);
+		brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+				 clkreq, &err);
 		if (err) {
 			brcmf_dbg(ERROR, "HT Avail request error: %d\n", err);
 			return -EBADE;
 		}
 
 		/* Check current status */
-		clkctl = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
-					       SBSDIO_FUNC1_CHIPCLKCSR, &err);
+		clkctl = brcmf_sdio_regrb(bus->sdiodev,
+					  SBSDIO_FUNC1_CHIPCLKCSR, &err);
 		if (err) {
 			brcmf_dbg(ERROR, "HT Avail read error: %d\n", err);
 			return -EBADE;
@@ -715,9 +701,8 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
 		/* Go to pending and await interrupt if appropriate */
 		if (!SBSDIO_CLKAV(clkctl, bus->alp_only) && pendok) {
 			/* Allow only clock-available interrupt */
-			devctl = brcmf_sdcard_cfg_read(bus->sdiodev,
-					SDIO_FUNC_1,
-					SBSDIO_DEVICE_CTL, &err);
+			devctl = brcmf_sdio_regrb(bus->sdiodev,
+						  SBSDIO_DEVICE_CTL, &err);
 			if (err) {
 				brcmf_dbg(ERROR, "Devctl error setting CA: %d\n",
 					  err);
@@ -725,30 +710,28 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
 			}
 
 			devctl |= SBSDIO_DEVCTL_CA_INT_ONLY;
-			brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
-					       SBSDIO_DEVICE_CTL, devctl, &err);
+			brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
+					 devctl, &err);
 			brcmf_dbg(INFO, "CLKCTL: set PENDING\n");
 			bus->clkstate = CLK_PENDING;
 
 			return 0;
 		} else if (bus->clkstate == CLK_PENDING) {
 			/* Cancel CA-only interrupt filter */
-			devctl =
-			    brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
+			devctl = brcmf_sdio_regrb(bus->sdiodev,
 						  SBSDIO_DEVICE_CTL, &err);
 			devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
-			brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
-				SBSDIO_DEVICE_CTL, devctl, &err);
+			brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
+					 devctl, &err);
 		}
 
 		/* Otherwise, wait here (polling) for HT Avail */
 		timeout = jiffies +
 			  msecs_to_jiffies(PMU_MAX_TRANSITION_DLY/1000);
 		while (!SBSDIO_CLKAV(clkctl, bus->alp_only)) {
-			clkctl = brcmf_sdcard_cfg_read(bus->sdiodev,
-						       SDIO_FUNC_1,
-						       SBSDIO_FUNC1_CHIPCLKCSR,
-						       &err);
+			clkctl = brcmf_sdio_regrb(bus->sdiodev,
+						  SBSDIO_FUNC1_CHIPCLKCSR,
+						  &err);
 			if (time_after(jiffies, timeout))
 				break;
 			else
@@ -781,17 +764,16 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
 
 		if (bus->clkstate == CLK_PENDING) {
 			/* Cancel CA-only interrupt filter */
-			devctl = brcmf_sdcard_cfg_read(bus->sdiodev,
-					SDIO_FUNC_1,
-					SBSDIO_DEVICE_CTL, &err);
+			devctl = brcmf_sdio_regrb(bus->sdiodev,
+						  SBSDIO_DEVICE_CTL, &err);
 			devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
-			brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
-				SBSDIO_DEVICE_CTL, devctl, &err);
+			brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
+					 devctl, &err);
 		}
 
 		bus->clkstate = CLK_SDONLY;
-		brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
-			SBSDIO_FUNC1_CHIPCLKCSR, clkreq, &err);
+		brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+				 clkreq, &err);
 		brcmf_dbg(INFO, "CLKCTL: turned OFF\n");
 		if (err) {
 			brcmf_dbg(ERROR, "Failed access turning clock off: %d\n",
@@ -874,7 +856,7 @@ static int brcmf_sdbrcm_clkctl(struct brcmf_sdio *bus, uint target, bool pendok)
 
 static int brcmf_sdbrcm_bussleep(struct brcmf_sdio *bus, bool sleep)
 {
-	uint retries = 0;
+	int ret;
 
 	brcmf_dbg(INFO, "request %s (currently %s)\n",
 		  sleep ? "SLEEP" : "WAKE",
@@ -894,22 +876,20 @@ static int brcmf_sdbrcm_bussleep(struct brcmf_sdio *bus, bool sleep)
 		brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
 
 		/* Tell device to start using OOB wakeup */
-		w_sdreg32(bus, SMB_USE_OOB,
-			  offsetof(struct sdpcmd_regs, tosbmailbox), &retries);
-		if (retries > retry_limit)
+		ret = w_sdreg32(bus, SMB_USE_OOB,
+				offsetof(struct sdpcmd_regs, tosbmailbox));
+		if (ret != 0)
 			brcmf_dbg(ERROR, "CANNOT SIGNAL CHIP, WILL NOT WAKE UP!!\n");
 
 		/* Turn off our contribution to the HT clock request */
 		brcmf_sdbrcm_clkctl(bus, CLK_SDONLY, false);
 
-		brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
-			SBSDIO_FUNC1_CHIPCLKCSR,
-			SBSDIO_FORCE_HW_CLKREQ_OFF, NULL);
+		brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+				 SBSDIO_FORCE_HW_CLKREQ_OFF, NULL);
 
 		/* Isolate the bus */
-		brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
-			SBSDIO_DEVICE_CTL,
-			SBSDIO_DEVCTL_PADS_ISO, NULL);
+		brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
+				 SBSDIO_DEVCTL_PADS_ISO, NULL);
 
 		/* Change state */
 		bus->sleeping = true;
@@ -917,21 +897,20 @@ static int brcmf_sdbrcm_bussleep(struct brcmf_sdio *bus, bool sleep)
 	} else {
 		/* Waking up: bus power up is ok, set local state */
 
-		brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
-			SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL);
+		brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+				 0, NULL);
 
 		/* Make sure the controller has the bus up */
 		brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
 
 		/* Send misc interrupt to indicate OOB not needed */
-		w_sdreg32(bus, 0, offsetof(struct sdpcmd_regs, tosbmailboxdata),
-			  &retries);
-		if (retries <= retry_limit)
-			w_sdreg32(bus, SMB_DEV_INT,
-				  offsetof(struct sdpcmd_regs, tosbmailbox),
-				  &retries);
-
-		if (retries > retry_limit)
+		ret = w_sdreg32(bus, 0,
+				offsetof(struct sdpcmd_regs, tosbmailboxdata));
+		if (ret == 0)
+			ret = w_sdreg32(bus, SMB_DEV_INT,
+				offsetof(struct sdpcmd_regs, tosbmailbox));
+
+		if (ret != 0)
 			brcmf_dbg(ERROR, "CANNOT SIGNAL CHIP TO CLEAR OOB!!\n");
 
 		/* Make sure we have SD bus access */
@@ -955,17 +934,17 @@ static u32 brcmf_sdbrcm_hostmail(struct brcmf_sdio *bus)
 	u32 intstatus = 0;
 	u32 hmb_data;
 	u8 fcbits;
-	uint retries = 0;
+	int ret;
 
 	brcmf_dbg(TRACE, "Enter\n");
 
 	/* Read mailbox data and ack that we did so */
-	r_sdreg32(bus, &hmb_data,
-		  offsetof(struct sdpcmd_regs, tohostmailboxdata), &retries);
+	ret = r_sdreg32(bus, &hmb_data,
+			offsetof(struct sdpcmd_regs, tohostmailboxdata));
 
-	if (retries <= retry_limit)
+	if (ret == 0)
 		w_sdreg32(bus, SMB_INT_ACK,
-			  offsetof(struct sdpcmd_regs, tosbmailbox), &retries);
+			  offsetof(struct sdpcmd_regs, tosbmailbox));
 	bus->f1regdata += 2;
 
 	/* Dongle recomposed rx frames, accept them again */
@@ -1040,17 +1019,16 @@ static void brcmf_sdbrcm_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
 	if (abort)
 		brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2);
 
-	brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
-			       SBSDIO_FUNC1_FRAMECTRL,
-			       SFC_RF_TERM, &err);
+	brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
+			 SFC_RF_TERM, &err);
 	bus->f1regdata++;
 
 	/* Wait until the packet has been flushed (device/FIFO stable) */
 	for (lastrbc = retries = 0xffff; retries > 0; retries--) {
-		hi = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
-					   SBSDIO_FUNC1_RFRAMEBCHI, NULL);
-		lo = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
-					   SBSDIO_FUNC1_RFRAMEBCLO, NULL);
+		hi = brcmf_sdio_regrb(bus->sdiodev,
+				      SBSDIO_FUNC1_RFRAMEBCHI, &err);
+		lo = brcmf_sdio_regrb(bus->sdiodev,
+				      SBSDIO_FUNC1_RFRAMEBCLO, &err);
 		bus->f1regdata += 2;
 
 		if ((hi == 0) && (lo == 0))
@@ -1070,11 +1048,11 @@ static void brcmf_sdbrcm_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
 
 	if (rtx) {
 		bus->rxrtx++;
-		w_sdreg32(bus, SMB_NAK,
-			  offsetof(struct sdpcmd_regs, tosbmailbox), &retries);
+		err = w_sdreg32(bus, SMB_NAK,
+				offsetof(struct sdpcmd_regs, tosbmailbox));
 
 		bus->f1regdata++;
-		if (retries <= retry_limit)
+		if (err == 0)
 			bus->rxskip = true;
 	}
 
@@ -1082,7 +1060,7 @@ static void brcmf_sdbrcm_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
 	bus->nextlen = 0;
 
 	/* If we can't reach the device, signal failure */
-	if (err || brcmf_sdcard_regfail(bus->sdiodev))
+	if (err)
 		bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
 }
 
@@ -2178,21 +2156,16 @@ static int brcmf_sdbrcm_txpkt(struct brcmf_sdio *bus, struct sk_buff *pkt,
 		bus->tx_sderrs++;
 
 		brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2);
-		brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
-				 SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM,
-				 NULL);
+		brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
+				 SFC_WF_TERM, NULL);
 		bus->f1regdata++;
 
 		for (i = 0; i < 3; i++) {
 			u8 hi, lo;
-			hi = brcmf_sdcard_cfg_read(bus->sdiodev,
-					     SDIO_FUNC_1,
-					     SBSDIO_FUNC1_WFRAMEBCHI,
-					     NULL);
-			lo = brcmf_sdcard_cfg_read(bus->sdiodev,
-					     SDIO_FUNC_1,
-					     SBSDIO_FUNC1_WFRAMEBCLO,
-					     NULL);
+			hi = brcmf_sdio_regrb(bus->sdiodev,
+					      SBSDIO_FUNC1_WFRAMEBCHI, NULL);
+			lo = brcmf_sdio_regrb(bus->sdiodev,
+					      SBSDIO_FUNC1_WFRAMEBCLO, NULL);
 			bus->f1regdata += 2;
 			if ((hi == 0) && (lo == 0))
 				break;
@@ -2219,7 +2192,6 @@ static uint brcmf_sdbrcm_sendfromq(struct brcmf_sdio *bus, uint maxframes)
 {
 	struct sk_buff *pkt;
 	u32 intstatus = 0;
-	uint retries = 0;
 	int ret = 0, prec_out;
 	uint cnt = 0;
 	uint datalen;
@@ -2249,11 +2221,11 @@ static uint brcmf_sdbrcm_sendfromq(struct brcmf_sdio *bus, uint maxframes)
 		/* In poll mode, need to check for other events */
 		if (!bus->intr && cnt) {
 			/* Check device status, signal pending interrupt */
-			r_sdreg32(bus, &intstatus,
-				  offsetof(struct sdpcmd_regs, intstatus),
-				  &retries);
+			ret = r_sdreg32(bus, &intstatus,
+					offsetof(struct sdpcmd_regs,
+						 intstatus));
 			bus->f2txdata++;
-			if (brcmf_sdcard_regfail(bus->sdiodev))
+			if (ret != 0)
 				break;
 			if (intstatus & bus->hostintmask)
 				bus->ipend = true;
@@ -2275,7 +2247,6 @@ static void brcmf_sdbrcm_bus_stop(struct device *dev)
 {
 	u32 local_hostintmask;
 	u8 saveclk;
-	uint retries;
 	int err;
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
@@ -2303,7 +2274,7 @@ static void brcmf_sdbrcm_bus_stop(struct device *dev)
 	brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
 
 	/* Disable and clear interrupts at the chip level also */
-	w_sdreg32(bus, 0, offsetof(struct sdpcmd_regs, hostintmask), &retries);
+	w_sdreg32(bus, 0, offsetof(struct sdpcmd_regs, hostintmask));
 	local_hostintmask = bus->hostintmask;
 	bus->hostintmask = 0;
 
@@ -2311,24 +2282,23 @@ static void brcmf_sdbrcm_bus_stop(struct device *dev)
 	bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
 
 	/* Force clocks on backplane to be sure F2 interrupt propagates */
-	saveclk = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
-					SBSDIO_FUNC1_CHIPCLKCSR, &err);
+	saveclk = brcmf_sdio_regrb(bus->sdiodev,
+				   SBSDIO_FUNC1_CHIPCLKCSR, &err);
 	if (!err) {
-		brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
-				       SBSDIO_FUNC1_CHIPCLKCSR,
-				       (saveclk | SBSDIO_FORCE_HT), &err);
+		brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+				 (saveclk | SBSDIO_FORCE_HT), &err);
 	}
 	if (err)
 		brcmf_dbg(ERROR, "Failed to force clock for F2: err %d\n", err);
 
 	/* Turn off the bus (F2), free any pending packets */
 	brcmf_dbg(INTR, "disable SDIO interrupts\n");
-	brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_0, SDIO_CCCR_IOEx,
-			 SDIO_FUNC_ENABLE_1, NULL);
+	brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, SDIO_FUNC_ENABLE_1,
+			 NULL);
 
 	/* Clear any pending interrupts now that F2 is disabled */
 	w_sdreg32(bus, local_hostintmask,
-		  offsetof(struct sdpcmd_regs, intstatus), &retries);
+		  offsetof(struct sdpcmd_regs, intstatus));
 
 	/* Turn off the backplane clock (only) */
 	brcmf_sdbrcm_clkctl(bus, CLK_SDONLY, false);
@@ -2373,12 +2343,12 @@ static inline void brcmf_sdbrcm_clrintr(struct brcmf_sdio *bus)
 static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
 {
 	u32 intstatus, newstatus = 0;
-	uint retries = 0;
 	uint rxlimit = bus->rxbound;	/* Rx frames to read before resched */
 	uint txlimit = bus->txbound;	/* Tx frames to send before resched */
 	uint framecnt = 0;	/* Temporary counter of tx/rx frames */
 	bool rxdone = true;	/* Flag for no more read data */
 	bool resched = false;	/* Flag indicating resched wanted */
+	int err;
 
 	brcmf_dbg(TRACE, "Enter\n");
 
@@ -2389,13 +2359,12 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
 
 	/* If waiting for HTAVAIL, check status */
 	if (bus->clkstate == CLK_PENDING) {
-		int err;
 		u8 clkctl, devctl = 0;
 
 #ifdef DEBUG
 		/* Check for inconsistent device control */
-		devctl = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
-					       SBSDIO_DEVICE_CTL, &err);
+		devctl = brcmf_sdio_regrb(bus->sdiodev,
+					  SBSDIO_DEVICE_CTL, &err);
 		if (err) {
 			brcmf_dbg(ERROR, "error reading DEVCTL: %d\n", err);
 			bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
@@ -2403,8 +2372,8 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
 #endif				/* DEBUG */
 
 		/* Read CSR, if clock on switch to AVAIL, else ignore */
-		clkctl = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
-					       SBSDIO_FUNC1_CHIPCLKCSR, &err);
+		clkctl = brcmf_sdio_regrb(bus->sdiodev,
+					  SBSDIO_FUNC1_CHIPCLKCSR, &err);
 		if (err) {
 			brcmf_dbg(ERROR, "error reading CSR: %d\n",
 				  err);
@@ -2415,17 +2384,16 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
 			  devctl, clkctl);
 
 		if (SBSDIO_HTAV(clkctl)) {
-			devctl = brcmf_sdcard_cfg_read(bus->sdiodev,
-						       SDIO_FUNC_1,
-						       SBSDIO_DEVICE_CTL, &err);
+			devctl = brcmf_sdio_regrb(bus->sdiodev,
+						  SBSDIO_DEVICE_CTL, &err);
 			if (err) {
 				brcmf_dbg(ERROR, "error reading DEVCTL: %d\n",
 					  err);
 				bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
 			}
 			devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
-			brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
-				SBSDIO_DEVICE_CTL, devctl, &err);
+			brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
+					 devctl, &err);
 			if (err) {
 				brcmf_dbg(ERROR, "error writing DEVCTL: %d\n",
 					  err);
@@ -2447,17 +2415,17 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
 	/* Pending interrupt indicates new device status */
 	if (bus->ipend) {
 		bus->ipend = false;
-		r_sdreg32(bus, &newstatus,
-			  offsetof(struct sdpcmd_regs, intstatus), &retries);
+		err = r_sdreg32(bus, &newstatus,
+				offsetof(struct sdpcmd_regs, intstatus));
 		bus->f1regdata++;
-		if (brcmf_sdcard_regfail(bus->sdiodev))
+		if (err != 0)
 			newstatus = 0;
 		newstatus &= bus->hostintmask;
 		bus->fcstate = !!(newstatus & I_HMB_FC_STATE);
 		if (newstatus) {
-			w_sdreg32(bus, newstatus,
-				  offsetof(struct sdpcmd_regs, intstatus),
-				  &retries);
+			err = w_sdreg32(bus, newstatus,
+					offsetof(struct sdpcmd_regs,
+						 intstatus));
 			bus->f1regdata++;
 		}
 	}
@@ -2472,11 +2440,11 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
 	 */
 	if (intstatus & I_HMB_FC_CHANGE) {
 		intstatus &= ~I_HMB_FC_CHANGE;
-		w_sdreg32(bus, I_HMB_FC_CHANGE,
-			  offsetof(struct sdpcmd_regs, intstatus), &retries);
+		err = w_sdreg32(bus, I_HMB_FC_CHANGE,
+				offsetof(struct sdpcmd_regs, intstatus));
 
-		r_sdreg32(bus, &newstatus,
-			  offsetof(struct sdpcmd_regs, intstatus), &retries);
+		err = r_sdreg32(bus, &newstatus,
+				offsetof(struct sdpcmd_regs, intstatus));
 		bus->f1regdata += 2;
 		bus->fcstate =
 		    !!(newstatus & (I_HMB_FC_STATE | I_HMB_FC_CHANGE));
@@ -2546,21 +2514,18 @@ clkwait:
 
 			brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2);
 
-			brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
-					 SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM,
-					 NULL);
+			brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
+					 SFC_WF_TERM, &err);
 			bus->f1regdata++;
 
 			for (i = 0; i < 3; i++) {
 				u8 hi, lo;
-				hi = brcmf_sdcard_cfg_read(bus->sdiodev,
-						     SDIO_FUNC_1,
-						     SBSDIO_FUNC1_WFRAMEBCHI,
-						     NULL);
-				lo = brcmf_sdcard_cfg_read(bus->sdiodev,
-						     SDIO_FUNC_1,
-						     SBSDIO_FUNC1_WFRAMEBCLO,
-						     NULL);
+				hi = brcmf_sdio_regrb(bus->sdiodev,
+						      SBSDIO_FUNC1_WFRAMEBCHI,
+						      &err);
+				lo = brcmf_sdio_regrb(bus->sdiodev,
+						      SBSDIO_FUNC1_WFRAMEBCLO,
+						      &err);
 				bus->f1regdata += 2;
 				if ((hi == 0) && (lo == 0))
 					break;
@@ -2587,10 +2552,8 @@ clkwait:
 		 else await next interrupt */
 	/* On failed register access, all bets are off:
 		 no resched or interrupts */
-	if ((bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) ||
-	    brcmf_sdcard_regfail(bus->sdiodev)) {
-		brcmf_dbg(ERROR, "failed backplane access over SDIO, halting operation %d\n",
-			  brcmf_sdcard_regfail(bus->sdiodev));
+	if ((bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) || (err != 0)) {
+		brcmf_dbg(ERROR, "failed backplane access over SDIO, halting operation\n");
 		bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
 		bus->intstatus = 0;
 	} else if (bus->clkstate == CLK_PENDING) {
@@ -2886,19 +2849,16 @@ static int brcmf_tx_frame(struct brcmf_sdio *bus, u8 *frame, u16 len)
 
 		brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2);
 
-		brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
-				       SBSDIO_FUNC1_FRAMECTRL,
-				       SFC_WF_TERM, NULL);
+		brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
+				 SFC_WF_TERM, NULL);
 		bus->f1regdata++;
 
 		for (i = 0; i < 3; i++) {
 			u8 hi, lo;
-			hi = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
-						   SBSDIO_FUNC1_WFRAMEBCHI,
-						   NULL);
-			lo = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
-						   SBSDIO_FUNC1_WFRAMEBCLO,
-						   NULL);
+			hi = brcmf_sdio_regrb(bus->sdiodev,
+					      SBSDIO_FUNC1_WFRAMEBCHI, NULL);
+			lo = brcmf_sdio_regrb(bus->sdiodev,
+					      SBSDIO_FUNC1_WFRAMEBCLO, NULL);
 			bus->f1regdata += 2;
 			if (hi == 0 && lo == 0)
 				break;
@@ -3188,7 +3148,6 @@ static int brcmf_sdbrcm_write_vars(struct brcmf_sdio *bus)
 
 static int brcmf_sdbrcm_download_state(struct brcmf_sdio *bus, bool enter)
 {
-	uint retries;
 	int bcmerror = 0;
 	struct chip_info *ci = bus->ci;
 
@@ -3222,7 +3181,7 @@ static int brcmf_sdbrcm_download_state(struct brcmf_sdio *bus, bool enter)
 		}
 
 		w_sdreg32(bus, 0xFFFFFFFF,
-			  offsetof(struct sdpcmd_regs, intstatus), &retries);
+			  offsetof(struct sdpcmd_regs, intstatus));
 
 		ci->resetcore(bus->sdiodev, ci, BCMA_CORE_ARM_CM3);
 
@@ -3444,7 +3403,6 @@ static int brcmf_sdbrcm_bus_init(struct device *dev)
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
 	struct brcmf_sdio *bus = sdiodev->bus;
 	unsigned long timeout;
-	uint retries = 0;
 	u8 ready, enable;
 	int err, ret = 0;
 	u8 saveclk;
@@ -3472,13 +3430,11 @@ static int brcmf_sdbrcm_bus_init(struct device *dev)
 		goto exit;
 
 	/* Force clocks on backplane to be sure F2 interrupt propagates */
-	saveclk =
-	    brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
-				  SBSDIO_FUNC1_CHIPCLKCSR, &err);
+	saveclk = brcmf_sdio_regrb(bus->sdiodev,
+				   SBSDIO_FUNC1_CHIPCLKCSR, &err);
 	if (!err) {
-		brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
-				       SBSDIO_FUNC1_CHIPCLKCSR,
-				       (saveclk | SBSDIO_FORCE_HT), &err);
+		brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+				 (saveclk | SBSDIO_FORCE_HT), &err);
 	}
 	if (err) {
 		brcmf_dbg(ERROR, "Failed to force clock for F2: err %d\n", err);
@@ -3487,17 +3443,16 @@ static int brcmf_sdbrcm_bus_init(struct device *dev)
 
 	/* Enable function 2 (frame transfers) */
 	w_sdreg32(bus, SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT,
-		  offsetof(struct sdpcmd_regs, tosbmailboxdata), &retries);
+		  offsetof(struct sdpcmd_regs, tosbmailboxdata));
 	enable = (SDIO_FUNC_ENABLE_1 | SDIO_FUNC_ENABLE_2);
 
-	brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_0, SDIO_CCCR_IOEx,
-			       enable, NULL);
+	brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, enable, NULL);
 
 	timeout = jiffies + msecs_to_jiffies(BRCMF_WAIT_F2RDY);
 	ready = 0;
 	while (enable != ready) {
-		ready = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_0,
-					      SDIO_CCCR_IORx, NULL);
+		ready = brcmf_sdio_regrb(bus->sdiodev,
+					 SDIO_CCCR_IORx, NULL);
 		if (time_after(jiffies, timeout))
 			break;
 		else if (time_after(jiffies, timeout - BRCMF_WAIT_F2RDY + 50))
@@ -3512,21 +3467,18 @@ static int brcmf_sdbrcm_bus_init(struct device *dev)
 		/* Set up the interrupt mask and enable interrupts */
 		bus->hostintmask = HOSTINTMASK;
 		w_sdreg32(bus, bus->hostintmask,
-			  offsetof(struct sdpcmd_regs, hostintmask), &retries);
+			  offsetof(struct sdpcmd_regs, hostintmask));
 
-		brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
-				       SBSDIO_WATERMARK, 8, &err);
+		brcmf_sdio_regwb(bus->sdiodev, SBSDIO_WATERMARK, 8, &err);
 	} else {
 		/* Disable F2 again */
 		enable = SDIO_FUNC_ENABLE_1;
-		brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_0,
-				       SDIO_CCCR_IOEx, enable, NULL);
+		brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, enable, NULL);
 		ret = -ENODEV;
 	}
 
 	/* Restore previous clock setting */
-	brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
-			       SBSDIO_FUNC1_CHIPCLKCSR, saveclk, &err);
+	brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, saveclk, &err);
 
 	if (ret == 0) {
 		ret = brcmf_sdio_intr_register(bus->sdiodev);
@@ -3606,9 +3558,9 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus)
 
 			if (!bus->dpc_sched) {
 				u8 devpend;
-				devpend = brcmf_sdcard_cfg_read(bus->sdiodev,
-						SDIO_FUNC_0, SDIO_CCCR_INTx,
-						NULL);
+				devpend = brcmf_sdio_regrb(bus->sdiodev,
+							   SDIO_CCCR_INTx,
+							   NULL);
 				intstatus =
 				    devpend & (INTR_STATUS_FUNC1 |
 					       INTR_STATUS_FUNC2);
@@ -3732,24 +3684,18 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva)
 
 	bus->alp_only = true;
 
-	/* Return the window to backplane enumeration space for core access */
-	if (brcmf_sdcard_set_sbaddr_window(bus->sdiodev, SI_ENUM_BASE))
-		brcmf_dbg(ERROR, "FAILED to return to SI_ENUM_BASE\n");
-
 	pr_debug("F1 signature read @0x18000000=0x%4x\n",
-		 brcmf_sdcard_reg_read(bus->sdiodev, SI_ENUM_BASE, 4));
+		 brcmf_sdio_regrl(bus->sdiodev, SI_ENUM_BASE, NULL));
 
 	/*
 	 * Force PLL off until brcmf_sdio_chip_attach()
 	 * programs PLL control regs
 	 */
 
-	brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
-			       SBSDIO_FUNC1_CHIPCLKCSR,
-			       BRCMF_INIT_CLKCTL1, &err);
+	brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+			 BRCMF_INIT_CLKCTL1, &err);
 	if (!err)
-		clkctl =
-		    brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
+		clkctl = brcmf_sdio_regrb(bus->sdiodev,
 					  SBSDIO_FUNC1_CHIPCLKCSR, &err);
 
 	if (err || ((clkctl & ~SBSDIO_AVBITS) != BRCMF_INIT_CLKCTL1)) {
@@ -3782,9 +3728,8 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva)
 	idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV);
 	reg_addr = bus->ci->c_inf[idx].base +
 		   offsetof(struct sdpcmd_regs, corecontrol);
-	reg_val = brcmf_sdcard_reg_read(bus->sdiodev, reg_addr, sizeof(u32));
-	brcmf_sdcard_reg_write(bus->sdiodev, reg_addr, sizeof(u32),
-			       reg_val | CC_BPRESEN);
+	reg_val = brcmf_sdio_regrl(bus->sdiodev, reg_addr, NULL);
+	brcmf_sdio_regwl(bus->sdiodev, reg_addr, reg_val | CC_BPRESEN, NULL);
 
 	brcmu_pktq_init(&bus->txq, (PRIOMASK + 1), TXQLEN);
 
@@ -3809,16 +3754,15 @@ static bool brcmf_sdbrcm_probe_init(struct brcmf_sdio *bus)
 	brcmf_dbg(TRACE, "Enter\n");
 
 	/* Disable F2 to clear any intermediate frame state on the dongle */
-	brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_0, SDIO_CCCR_IOEx,
-			       SDIO_FUNC_ENABLE_1, NULL);
+	brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx,
+			 SDIO_FUNC_ENABLE_1, NULL);
 
 	bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
 	bus->sleeping = false;
 	bus->rxflow = false;
 
 	/* Done with backplane-dependent accesses, can drop clock... */
-	brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
-			       SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL);
+	brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL);
 
 	/* ...and initialize clock/power states */
 	bus->clkstate = CLK_SDONLY;
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
index 1534efc2163..f8e1f1c84d0 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
@@ -93,8 +93,9 @@ brcmf_sdio_sb_corerev(struct brcmf_sdio_dev *sdiodev,
 
 	idx = brcmf_sdio_chip_getinfidx(ci, coreid);
 
-	regdata = brcmf_sdcard_reg_read(sdiodev,
-			CORE_SB(ci->c_inf[idx].base, sbidhigh), 4);
+	regdata = brcmf_sdio_regrl(sdiodev,
+				   CORE_SB(ci->c_inf[idx].base, sbidhigh),
+				   NULL);
 	return SBCOREREV(regdata);
 }
 
@@ -118,8 +119,9 @@ brcmf_sdio_sb_iscoreup(struct brcmf_sdio_dev *sdiodev,
 
 	idx = brcmf_sdio_chip_getinfidx(ci, coreid);
 
-	regdata = brcmf_sdcard_reg_read(sdiodev,
-			CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4);
+	regdata = brcmf_sdio_regrl(sdiodev,
+				   CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
+				   NULL);
 	regdata &= (SSB_TMSLOW_RESET | SSB_TMSLOW_REJECT |
 		    SSB_IMSTATE_REJECT | SSB_TMSLOW_CLOCK);
 	return (SSB_TMSLOW_CLOCK == regdata);
@@ -135,13 +137,13 @@ brcmf_sdio_ai_iscoreup(struct brcmf_sdio_dev *sdiodev,
 
 	idx = brcmf_sdio_chip_getinfidx(ci, coreid);
 
-	regdata = brcmf_sdcard_reg_read(sdiodev,
-					ci->c_inf[idx].wrapbase+BCMA_IOCTL, 4);
+	regdata = brcmf_sdio_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
+				   NULL);
 	ret = (regdata & (BCMA_IOCTL_FGC | BCMA_IOCTL_CLK)) == BCMA_IOCTL_CLK;
 
-	regdata = brcmf_sdcard_reg_read(sdiodev,
-					ci->c_inf[idx].wrapbase+BCMA_RESET_CTL,
-					4);
+	regdata = brcmf_sdio_regrl(sdiodev,
+				   ci->c_inf[idx].wrapbase+BCMA_RESET_CTL,
+				   NULL);
 	ret = ret && ((regdata & BCMA_RESET_CTL_RESET) == 0);
 
 	return ret;
@@ -151,84 +153,85 @@ static void
 brcmf_sdio_sb_coredisable(struct brcmf_sdio_dev *sdiodev,
 			  struct chip_info *ci, u16 coreid)
 {
-	u32 regdata;
+	u32 regdata, base;
 	u8 idx;
 
 	idx = brcmf_sdio_chip_getinfidx(ci, coreid);
+	base = ci->c_inf[idx].base;
 
-	regdata = brcmf_sdcard_reg_read(sdiodev,
-		CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4);
+	regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow), NULL);
 	if (regdata & SSB_TMSLOW_RESET)
 		return;
 
-	regdata = brcmf_sdcard_reg_read(sdiodev,
-		CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4);
+	regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow), NULL);
 	if ((regdata & SSB_TMSLOW_CLOCK) != 0) {
 		/*
 		 * set target reject and spin until busy is clear
 		 * (preserve core-specific bits)
 		 */
-		regdata = brcmf_sdcard_reg_read(sdiodev,
-			CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4);
-		brcmf_sdcard_reg_write(sdiodev,
-				CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
-				4, regdata | SSB_TMSLOW_REJECT);
-
-		regdata = brcmf_sdcard_reg_read(sdiodev,
-			CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4);
+		regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow),
+					   NULL);
+		brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbtmstatelow),
+				 regdata | SSB_TMSLOW_REJECT, NULL);
+
+		regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow),
+					   NULL);
 		udelay(1);
-		SPINWAIT((brcmf_sdcard_reg_read(sdiodev,
-			CORE_SB(ci->c_inf[idx].base, sbtmstatehigh), 4) &
+		SPINWAIT((brcmf_sdio_regrl(sdiodev,
+					   CORE_SB(base, sbtmstatehigh),
+					   NULL) &
 			SSB_TMSHIGH_BUSY), 100000);
 
-		regdata = brcmf_sdcard_reg_read(sdiodev,
-			CORE_SB(ci->c_inf[idx].base, sbtmstatehigh), 4);
+		regdata = brcmf_sdio_regrl(sdiodev,
+					   CORE_SB(base, sbtmstatehigh),
+					   NULL);
 		if (regdata & SSB_TMSHIGH_BUSY)
 			brcmf_dbg(ERROR, "core state still busy\n");
 
-		regdata = brcmf_sdcard_reg_read(sdiodev,
-			CORE_SB(ci->c_inf[idx].base, sbidlow), 4);
+		regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbidlow),
+					   NULL);
 		if (regdata & SSB_IDLOW_INITIATOR) {
-			regdata = brcmf_sdcard_reg_read(sdiodev,
-				CORE_SB(ci->c_inf[idx].base, sbimstate), 4) |
-				SSB_IMSTATE_REJECT;
-			brcmf_sdcard_reg_write(sdiodev,
-				CORE_SB(ci->c_inf[idx].base, sbimstate), 4,
-				regdata);
-			regdata = brcmf_sdcard_reg_read(sdiodev,
-				CORE_SB(ci->c_inf[idx].base, sbimstate), 4);
+			regdata = brcmf_sdio_regrl(sdiodev,
+						   CORE_SB(base, sbimstate),
+						   NULL);
+			regdata |= SSB_IMSTATE_REJECT;
+			brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbimstate),
+					 regdata, NULL);
+			regdata = brcmf_sdio_regrl(sdiodev,
+						   CORE_SB(base, sbimstate),
+						   NULL);
 			udelay(1);
-			SPINWAIT((brcmf_sdcard_reg_read(sdiodev,
-				CORE_SB(ci->c_inf[idx].base, sbimstate), 4) &
+			SPINWAIT((brcmf_sdio_regrl(sdiodev,
+						   CORE_SB(base, sbimstate),
+						   NULL) &
 				SSB_IMSTATE_BUSY), 100000);
 		}
 
 		/* set reset and reject while enabling the clocks */
-		brcmf_sdcard_reg_write(sdiodev,
-			CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4,
-			(SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
-			SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET));
-		regdata = brcmf_sdcard_reg_read(sdiodev,
-			CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4);
+		regdata = SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
+			  SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET;
+		brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbtmstatelow),
+				 regdata, NULL);
+		regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow),
+					   NULL);
 		udelay(10);
 
 		/* clear the initiator reject bit */
-		regdata = brcmf_sdcard_reg_read(sdiodev,
-			CORE_SB(ci->c_inf[idx].base, sbidlow), 4);
+		regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbidlow),
+					   NULL);
 		if (regdata & SSB_IDLOW_INITIATOR) {
-			regdata = brcmf_sdcard_reg_read(sdiodev,
-				CORE_SB(ci->c_inf[idx].base, sbimstate), 4) &
-				~SSB_IMSTATE_REJECT;
-			brcmf_sdcard_reg_write(sdiodev,
-				CORE_SB(ci->c_inf[idx].base, sbimstate), 4,
-				regdata);
+			regdata = brcmf_sdio_regrl(sdiodev,
+						   CORE_SB(base, sbimstate),
+						   NULL);
+			regdata &= ~SSB_IMSTATE_REJECT;
+			brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbimstate),
+					 regdata, NULL);
 		}
 	}
 
 	/* leave reset and reject asserted */
-	brcmf_sdcard_reg_write(sdiodev,
-		CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4,
-		(SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET));
+	brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbtmstatelow),
+			 (SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET), NULL);
 	udelay(1);
 }
 
@@ -242,20 +245,19 @@ brcmf_sdio_ai_coredisable(struct brcmf_sdio_dev *sdiodev,
 	idx = brcmf_sdio_chip_getinfidx(ci, coreid);
 
 	/* if core is already in reset, just return */
-	regdata = brcmf_sdcard_reg_read(sdiodev,
-					ci->c_inf[idx].wrapbase+BCMA_RESET_CTL,
-					4);
+	regdata = brcmf_sdio_regrl(sdiodev,
+				   ci->c_inf[idx].wrapbase+BCMA_RESET_CTL,
+				   NULL);
 	if ((regdata & BCMA_RESET_CTL_RESET) != 0)
 		return;
 
-	brcmf_sdcard_reg_write(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
-			       4, 0);
-	regdata = brcmf_sdcard_reg_read(sdiodev,
-					ci->c_inf[idx].wrapbase+BCMA_IOCTL, 4);
+	brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, 0, NULL);
+	regdata = brcmf_sdio_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
+				   NULL);
 	udelay(10);
 
-	brcmf_sdcard_reg_write(sdiodev, ci->c_inf[idx].wrapbase+BCMA_RESET_CTL,
-			       4, BCMA_RESET_CTL_RESET);
+	brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_RESET_CTL,
+			 BCMA_RESET_CTL_RESET, NULL);
 	udelay(1);
 }
 
@@ -279,41 +281,47 @@ brcmf_sdio_sb_resetcore(struct brcmf_sdio_dev *sdiodev,
 	 * set reset while enabling the clock and
 	 * forcing them on throughout the core
 	 */
-	brcmf_sdcard_reg_write(sdiodev,
-			CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4,
-			SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET);
-	regdata = brcmf_sdcard_reg_read(sdiodev,
-				CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4);
+	brcmf_sdio_regwl(sdiodev,
+			 CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
+			 SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET,
+			 NULL);
+	regdata = brcmf_sdio_regrl(sdiodev,
+				   CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
+				   NULL);
 	udelay(1);
 
 	/* clear any serror */
-	regdata = brcmf_sdcard_reg_read(sdiodev,
-				CORE_SB(ci->c_inf[idx].base, sbtmstatehigh), 4);
+	regdata = brcmf_sdio_regrl(sdiodev,
+				   CORE_SB(ci->c_inf[idx].base, sbtmstatehigh),
+				   NULL);
 	if (regdata & SSB_TMSHIGH_SERR)
-		brcmf_sdcard_reg_write(sdiodev,
-			CORE_SB(ci->c_inf[idx].base, sbtmstatehigh), 4, 0);
+		brcmf_sdio_regwl(sdiodev,
+				 CORE_SB(ci->c_inf[idx].base, sbtmstatehigh),
+				 0, NULL);
 
-	regdata = brcmf_sdcard_reg_read(sdiodev,
-				CORE_SB(ci->c_inf[idx].base, sbimstate), 4);
+	regdata = brcmf_sdio_regrl(sdiodev,
+				   CORE_SB(ci->c_inf[idx].base, sbimstate),
+				   NULL);
 	if (regdata & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO))
-		brcmf_sdcard_reg_write(sdiodev,
-			CORE_SB(ci->c_inf[idx].base, sbimstate), 4,
-			regdata & ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO));
+		brcmf_sdio_regwl(sdiodev,
+				 CORE_SB(ci->c_inf[idx].base, sbimstate),
+				 regdata & ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO),
+				 NULL);
 
 	/* clear reset and allow it to propagate throughout the core */
-	brcmf_sdcard_reg_write(sdiodev,
-		CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4,
-		SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK);
-	regdata = brcmf_sdcard_reg_read(sdiodev,
-				CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4);
+	brcmf_sdio_regwl(sdiodev, CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
+			 SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK, NULL);
+	regdata = brcmf_sdio_regrl(sdiodev,
+				   CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
+				   NULL);
 	udelay(1);
 
 	/* leave clock enabled */
-	brcmf_sdcard_reg_write(sdiodev,
-			       CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
-			       4, SSB_TMSLOW_CLOCK);
-	regdata = brcmf_sdcard_reg_read(sdiodev,
-				CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4);
+	brcmf_sdio_regwl(sdiodev, CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
+			 SSB_TMSLOW_CLOCK, NULL);
+	regdata = brcmf_sdio_regrl(sdiodev,
+				   CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
+				   NULL);
 	udelay(1);
 }
 
@@ -330,18 +338,18 @@ brcmf_sdio_ai_resetcore(struct brcmf_sdio_dev *sdiodev,
 	brcmf_sdio_ai_coredisable(sdiodev, ci, coreid);
 
 	/* now do initialization sequence */
-	brcmf_sdcard_reg_write(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
-			       4, BCMA_IOCTL_FGC | BCMA_IOCTL_CLK);
-	regdata = brcmf_sdcard_reg_read(sdiodev,
-					ci->c_inf[idx].wrapbase+BCMA_IOCTL, 4);
-	brcmf_sdcard_reg_write(sdiodev, ci->c_inf[idx].wrapbase+BCMA_RESET_CTL,
-			       4, 0);
+	brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
+			 BCMA_IOCTL_FGC | BCMA_IOCTL_CLK, NULL);
+	regdata = brcmf_sdio_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
+				   NULL);
+	brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_RESET_CTL,
+			 0, NULL);
 	udelay(1);
 
-	brcmf_sdcard_reg_write(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
-			       4, BCMA_IOCTL_CLK);
-	regdata = brcmf_sdcard_reg_read(sdiodev,
-					ci->c_inf[idx].wrapbase+BCMA_IOCTL, 4);
+	brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
+			 BCMA_IOCTL_CLK, NULL);
+	regdata = brcmf_sdio_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
+				   NULL);
 	udelay(1);
 }
 
@@ -358,8 +366,9 @@ static int brcmf_sdio_chip_recognition(struct brcmf_sdio_dev *sdiodev,
 	 */
 	ci->c_inf[0].id = BCMA_CORE_CHIPCOMMON;
 	ci->c_inf[0].base = regs;
-	regdata = brcmf_sdcard_reg_read(sdiodev,
-			CORE_CC_REG(ci->c_inf[0].base, chipid), 4);
+	regdata = brcmf_sdio_regrl(sdiodev,
+				   CORE_CC_REG(ci->c_inf[0].base, chipid),
+				   NULL);
 	ci->chip = regdata & CID_ID_MASK;
 	ci->chiprev = (regdata & CID_REV_MASK) >> CID_REV_SHIFT;
 	ci->socitype = (regdata & CID_TYPE_MASK) >> CID_TYPE_SHIFT;
@@ -428,8 +437,7 @@ brcmf_sdio_chip_buscoreprep(struct brcmf_sdio_dev *sdiodev)
 
 	/* Try forcing SDIO core to do ALPAvail request only */
 	clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_ALP_AVAIL_REQ;
-	brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_1,
-			       SBSDIO_FUNC1_CHIPCLKCSR,	clkset, &err);
+	brcmf_sdio_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
 	if (err) {
 		brcmf_dbg(ERROR, "error writing for HT off\n");
 		return err;
@@ -437,8 +445,8 @@ brcmf_sdio_chip_buscoreprep(struct brcmf_sdio_dev *sdiodev)
 
 	/* If register supported, wait for ALPAvail and then force ALP */
 	/* This may take up to 15 milliseconds */
-	clkval = brcmf_sdcard_cfg_read(sdiodev, SDIO_FUNC_1,
-				       SBSDIO_FUNC1_CHIPCLKCSR, NULL);
+	clkval = brcmf_sdio_regrb(sdiodev,
+				  SBSDIO_FUNC1_CHIPCLKCSR, NULL);
 
 	if ((clkval & ~SBSDIO_AVBITS) != clkset) {
 		brcmf_dbg(ERROR, "ChipClkCSR access: wrote 0x%02x read 0x%02x\n",
@@ -446,8 +454,8 @@ brcmf_sdio_chip_buscoreprep(struct brcmf_sdio_dev *sdiodev)
 		return -EACCES;
 	}
 
-	SPINWAIT(((clkval = brcmf_sdcard_cfg_read(sdiodev, SDIO_FUNC_1,
-				SBSDIO_FUNC1_CHIPCLKCSR, NULL)),
+	SPINWAIT(((clkval = brcmf_sdio_regrb(sdiodev,
+					     SBSDIO_FUNC1_CHIPCLKCSR, NULL)),
 			!SBSDIO_ALPAV(clkval)),
 			PMU_MAX_TRANSITION_DLY);
 	if (!SBSDIO_ALPAV(clkval)) {
@@ -457,13 +465,11 @@ brcmf_sdio_chip_buscoreprep(struct brcmf_sdio_dev *sdiodev)
 	}
 
 	clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_FORCE_ALP;
-	brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_1,
-			       SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
+	brcmf_sdio_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
 	udelay(65);
 
 	/* Also, disable the extra SDIO pull-ups */
-	brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_1,
-			       SBSDIO_FUNC1_SDIOPULLUP, 0, NULL);
+	brcmf_sdio_regwb(sdiodev, SBSDIO_FUNC1_SDIOPULLUP, 0, NULL);
 
 	return 0;
 }
@@ -472,18 +478,22 @@ static void
 brcmf_sdio_chip_buscoresetup(struct brcmf_sdio_dev *sdiodev,
 			     struct chip_info *ci)
 {
+	u32 base = ci->c_inf[0].base;
+
 	/* get chipcommon rev */
 	ci->c_inf[0].rev = ci->corerev(sdiodev, ci, ci->c_inf[0].id);
 
 	/* get chipcommon capabilites */
-	ci->c_inf[0].caps =
-		brcmf_sdcard_reg_read(sdiodev,
-		CORE_CC_REG(ci->c_inf[0].base, capabilities), 4);
+	ci->c_inf[0].caps = brcmf_sdio_regrl(sdiodev,
+					     CORE_CC_REG(base, capabilities),
+					     NULL);
 
 	/* get pmu caps & rev */
 	if (ci->c_inf[0].caps & CC_CAP_PMU) {
-		ci->pmucaps = brcmf_sdcard_reg_read(sdiodev,
-			CORE_CC_REG(ci->c_inf[0].base, pmucapabilities), 4);
+		ci->pmucaps =
+			brcmf_sdio_regrl(sdiodev,
+					 CORE_CC_REG(base, pmucapabilities),
+					 NULL);
 		ci->pmurev = ci->pmucaps & PCAP_REV_MASK;
 	}
 
@@ -523,10 +533,10 @@ int brcmf_sdio_chip_attach(struct brcmf_sdio_dev *sdiodev,
 
 	brcmf_sdio_chip_buscoresetup(sdiodev, ci);
 
-	brcmf_sdcard_reg_write(sdiodev,
-		CORE_CC_REG(ci->c_inf[0].base, gpiopullup), 4, 0);
-	brcmf_sdcard_reg_write(sdiodev,
-		CORE_CC_REG(ci->c_inf[0].base, gpiopulldown), 4, 0);
+	brcmf_sdio_regwl(sdiodev, CORE_CC_REG(ci->c_inf[0].base, gpiopullup),
+			 0, NULL);
+	brcmf_sdio_regwl(sdiodev, CORE_CC_REG(ci->c_inf[0].base, gpiopulldown),
+			 0, NULL);
 
 	*ci_ptr = ci;
 	return 0;
@@ -562,6 +572,7 @@ brcmf_sdio_chip_drivestrengthinit(struct brcmf_sdio_dev *sdiodev,
 	u32 str_mask = 0;
 	u32 str_shift = 0;
 	char chn[8];
+	u32 base = ci->c_inf[0].base;
 
 	if (!(ci->c_inf[0].caps & CC_CAP_PMU))
 		return;
@@ -591,17 +602,17 @@ brcmf_sdio_chip_drivestrengthinit(struct brcmf_sdio_dev *sdiodev,
 			}
 		}
 
-		brcmf_sdcard_reg_write(sdiodev,
-			CORE_CC_REG(ci->c_inf[0].base, chipcontrol_addr),
-			4, 1);
-		cc_data_temp = brcmf_sdcard_reg_read(sdiodev,
-			CORE_CC_REG(ci->c_inf[0].base, chipcontrol_addr), 4);
+		brcmf_sdio_regwl(sdiodev, CORE_CC_REG(base, chipcontrol_addr),
+				 1, NULL);
+		cc_data_temp =
+			brcmf_sdio_regrl(sdiodev,
+					 CORE_CC_REG(base, chipcontrol_addr),
+					 NULL);
 		cc_data_temp &= ~str_mask;
 		drivestrength_sel <<= str_shift;
 		cc_data_temp |= drivestrength_sel;
-		brcmf_sdcard_reg_write(sdiodev,
-			CORE_CC_REG(ci->c_inf[0].base, chipcontrol_addr),
-			4, cc_data_temp);
+		brcmf_sdio_regwl(sdiodev, CORE_CC_REG(base, chipcontrol_addr),
+				 cc_data_temp, NULL);
 
 		brcmf_dbg(INFO, "SDIO: %dmA drive strength selected, set to 0x%08x\n",
 			  drivestrength, cc_data_temp);
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
index 7010eaf71f9..29bf78d264e 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
@@ -40,6 +40,10 @@
 /* Maximum number of I/O funcs */
 #define SDIOD_MAX_IOFUNCS	7
 
+/* mask of register map */
+#define REG_F0_REG_MASK		0x7FF
+#define REG_F1_MISC_MASK	0x1FFFF
+
 /* as of sdiod rev 0, supports 3 functions */
 #define SBSDIO_NUM_FUNCTION		3
 
@@ -142,7 +146,6 @@ struct brcmf_sdio_dev {
 	u8 num_funcs;			/* Supported funcs on client */
 	u32 func_cis_ptr[SDIOD_MAX_IOFUNCS];
 	u32 sbwad;			/* Save backplane window address */
-	bool regfail;			/* status of last reg_r/w call */
 	void *bus;
 	atomic_t suspend;		/* suspend flag */
 	wait_queue_head_t request_byte_wait;
@@ -164,31 +167,13 @@ struct brcmf_sdio_dev {
 extern int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev);
 extern int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev);
 
-/* Access SDIO address space (e.g. CCCR) using CMD52 (single-byte interface).
- *   fn:   function number
- *   addr: unmodified SDIO-space address
- *   data: data byte to write
- *   err:  pointer to error code (or NULL)
- */
-extern u8 brcmf_sdcard_cfg_read(struct brcmf_sdio_dev *sdiodev, uint func,
-				u32 addr, int *err);
-extern void brcmf_sdcard_cfg_write(struct brcmf_sdio_dev *sdiodev, uint func,
-				   u32 addr, u8 data, int *err);
-
-/* Synchronous access to device (client) core registers via CMD53 to F1.
- *   addr: backplane address (i.e. >= regsva from attach)
- *   size: register width in bytes (2 or 4)
- *   data: data for register write
- */
-extern u32
-brcmf_sdcard_reg_read(struct brcmf_sdio_dev *sdiodev, u32 addr, uint size);
-
-extern u32
-brcmf_sdcard_reg_write(struct brcmf_sdio_dev *sdiodev, u32 addr, uint size,
-		       u32 data);
-
-/* Indicate if last reg read/write failed */
-extern bool brcmf_sdcard_regfail(struct brcmf_sdio_dev *sdiodev);
+/* sdio device register access interface */
+extern u8 brcmf_sdio_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret);
+extern u32 brcmf_sdio_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret);
+extern void brcmf_sdio_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr,
+			     u8 data, int *ret);
+extern void brcmf_sdio_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr,
+			     u32 data, int *ret);
 
 /* Buffer transfer to/from device (client) core via cmd53.
  *   fn:       function number
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/Makefile b/drivers/net/wireless/brcm80211/brcmsmac/Makefile
index c2eb2d0af38..e227c4c68ef 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/Makefile
+++ b/drivers/net/wireless/brcm80211/brcmsmac/Makefile
@@ -39,10 +39,7 @@ BRCMSMAC_OFILES := \
 	phy/phytbl_lcn.o \
 	phy/phytbl_n.o \
 	phy/phy_qmath.o \
-	otp.o \
-	srom.o \
 	dma.o \
-	nicpci.o \
 	brcms_trace_events.o
 
 MODULEPFX := brcmsmac
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
index c93ea35bcee..6d8b7213643 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
@@ -19,7 +19,6 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/delay.h>
-#include <linux/pci.h>
 
 #include <defs.h>
 #include <chipcommon.h>
@@ -29,8 +28,6 @@
 #include "types.h"
 #include "pub.h"
 #include "pmu.h"
-#include "srom.h"
-#include "nicpci.h"
 #include "aiutils.h"
 
 /* slow_clk_ctl */
@@ -321,7 +318,6 @@
 #define	IS_SIM(chippkg)	\
 	((chippkg == HDLSIM_PKG_ID) || (chippkg == HWSIM_PKG_ID))
 
-#define PCI(sih)	(ai_get_buscoretype(sih) == PCI_CORE_ID)
 #define PCIE(sih)	(ai_get_buscoretype(sih) == PCIE_CORE_ID)
 
 #define PCI_FORCEHT(sih) (PCIE(sih) && (ai_get_chip_id(sih) == BCM4716_CHIP_ID))
@@ -454,36 +450,9 @@ struct aidmp {
 	u32 componentid3;	/* 0xffc */
 };
 
-/* return true if PCIE capability exists in the pci config space */
-static bool ai_ispcie(struct si_info *sii)
-{
-	u8 cap_ptr;
-
-	cap_ptr =
-	    pcicore_find_pci_capability(sii->pcibus, PCI_CAP_ID_EXP, NULL,
-					NULL);
-	if (!cap_ptr)
-		return false;
-
-	return true;
-}
-
-static bool ai_buscore_prep(struct si_info *sii)
-{
-	/* kludge to enable the clock on the 4306 which lacks a slowclock */
-	if (!ai_ispcie(sii))
-		ai_clkctl_xtal(&sii->pub, XTAL | PLL, ON);
-	return true;
-}
-
 static bool
 ai_buscore_setup(struct si_info *sii, struct bcma_device *cc)
 {
-	struct bcma_device *pci = NULL;
-	struct bcma_device *pcie = NULL;
-	struct bcma_device *core;
-
-
 	/* no cores found, bail out */
 	if (cc->bus->nr_cores == 0)
 		return false;
@@ -492,8 +461,7 @@ ai_buscore_setup(struct si_info *sii, struct bcma_device *cc)
 	sii->pub.ccrev = cc->id.rev;
 
 	/* get chipcommon chipstatus */
-	if (ai_get_ccrev(&sii->pub) >= 11)
-		sii->chipst = bcma_read32(cc, CHIPCREGOFFS(chipstatus));
+	sii->chipst = bcma_read32(cc, CHIPCREGOFFS(chipstatus));
 
 	/* get chipcommon capabilites */
 	sii->pub.cccaps = bcma_read32(cc, CHIPCREGOFFS(capabilities));
@@ -506,64 +474,18 @@ ai_buscore_setup(struct si_info *sii, struct bcma_device *cc)
 	}
 
 	/* figure out buscore */
-	list_for_each_entry(core, &cc->bus->cores, list) {
-		uint cid, crev;
-
-		cid = core->id.id;
-		crev = core->id.rev;
-
-		if (cid == PCI_CORE_ID) {
-			pci = core;
-		} else if (cid == PCIE_CORE_ID) {
-			pcie = core;
-		}
-	}
-
-	if (pci && pcie) {
-		if (ai_ispcie(sii))
-			pci = NULL;
-		else
-			pcie = NULL;
-	}
-	if (pci) {
-		sii->buscore = pci;
-	} else if (pcie) {
-		sii->buscore = pcie;
-	}
-
-	/* fixup necessary chip/core configurations */
-	if (!sii->pch) {
-		sii->pch = pcicore_init(&sii->pub, sii->icbus->drv_pci.core);
-		if (sii->pch == NULL)
-			return false;
-	}
-	if (ai_pci_fixcfg(&sii->pub))
-		return false;
+	sii->buscore = ai_findcore(&sii->pub, PCIE_CORE_ID, 0);
 
 	return true;
 }
 
-/*
- * get boardtype and boardrev
- */
-static __used void ai_nvram_process(struct si_info *sii)
-{
-	uint w = 0;
-
-	/* do a pci config read to get subsystem id and subvendor id */
-	pci_read_config_dword(sii->pcibus, PCI_SUBSYSTEM_VENDOR_ID, &w);
-
-	sii->pub.boardvendor = w & 0xffff;
-	sii->pub.boardtype = (w >> 16) & 0xffff;
-}
-
 static struct si_info *ai_doattach(struct si_info *sii,
 				   struct bcma_bus *pbus)
 {
 	struct si_pub *sih = &sii->pub;
 	u32 w, savewin;
 	struct bcma_device *cc;
-	uint socitype;
+	struct ssb_sprom *sprom = &pbus->sprom;
 
 	savewin = 0;
 
@@ -573,38 +495,15 @@ static struct si_info *ai_doattach(struct si_info *sii,
 	/* switch to Chipcommon core */
 	cc = pbus->drv_cc.core;
 
-	/* bus/core/clk setup for register access */
-	if (!ai_buscore_prep(sii))
-		return NULL;
+	sih->chip = pbus->chipinfo.id;
+	sih->chiprev = pbus->chipinfo.rev;
+	sih->chippkg = pbus->chipinfo.pkg;
+	sih->boardvendor = pbus->boardinfo.vendor;
+	sih->boardtype = pbus->boardinfo.type;
 
-	/*
-	 * ChipID recognition.
-	 *   We assume we can read chipid at offset 0 from the regs arg.
-	 *   If we add other chiptypes (or if we need to support old sdio
-	 *   hosts w/o chipcommon), some way of recognizing them needs to
-	 *   be added here.
-	 */
-	w = bcma_read32(cc, CHIPCREGOFFS(chipid));
-	socitype = (w & CID_TYPE_MASK) >> CID_TYPE_SHIFT;
-	/* Might as wll fill in chip id rev & pkg */
-	sih->chip = w & CID_ID_MASK;
-	sih->chiprev = (w & CID_REV_MASK) >> CID_REV_SHIFT;
-	sih->chippkg = (w & CID_PKG_MASK) >> CID_PKG_SHIFT;
-
-	/* scan for cores */
-	if (socitype != SOCI_AI)
-		return NULL;
-
-	SI_MSG("Found chip type AI (0x%08x)\n", w);
 	if (!ai_buscore_setup(sii, cc))
 		goto exit;
 
-	/* Init nvram from sprom/otp if they exist */
-	if (srom_var_init(&sii->pub))
-		goto exit;
-
-	ai_nvram_process(sii);
-
 	/* === NVRAM, clock is ready === */
 	bcma_write32(cc, CHIPCREGOFFS(gpiopullup), 0);
 	bcma_write32(cc, CHIPCREGOFFS(gpiopulldown), 0);
@@ -617,15 +516,13 @@ static struct si_info *ai_doattach(struct si_info *sii,
 	}
 
 	/* setup the GPIO based LED powersave register */
-	w = getintvar(sih, BRCMS_SROM_LEDDC);
+	w = (sprom->leddc_on_time << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) |
+		 (sprom->leddc_off_time << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT);
 	if (w == 0)
 		w = DEFAULT_GPIOTIMERVAL;
 	ai_cc_reg(sih, offsetof(struct chipcregs, gpiotimerval),
 		  ~0, w);
 
-	if (PCIE(sih))
-		pcicore_attach(sii->pch, SI_DOATTACH);
-
 	if (ai_get_chip_id(sih) == BCM43224_CHIP_ID) {
 		/*
 		 * enable 12 mA drive strenth for 43224 and
@@ -659,9 +556,6 @@ static struct si_info *ai_doattach(struct si_info *sii,
 	return sii;
 
  exit:
-	if (sii->pch)
-		pcicore_deinit(sii->pch);
-	sii->pch = NULL;
 
 	return NULL;
 }
@@ -700,11 +594,6 @@ void ai_detach(struct si_pub *sih)
 	if (sii == NULL)
 		return;
 
-	if (sii->pch)
-		pcicore_deinit(sii->pch);
-	sii->pch = NULL;
-
-	srom_free_vars(sih);
 	kfree(sii);
 }
 
@@ -755,21 +644,7 @@ uint ai_cc_reg(struct si_pub *sih, uint regoff, u32 mask, u32 val)
 /* return the slow clock source - LPO, XTAL, or PCI */
 static uint ai_slowclk_src(struct si_pub *sih, struct bcma_device *cc)
 {
-	struct si_info *sii;
-	u32 val;
-
-	sii = (struct si_info *)sih;
-	if (ai_get_ccrev(&sii->pub) < 6) {
-		pci_read_config_dword(sii->pcibus, PCI_GPIO_OUT,
-				      &val);
-		if (val & PCI_CFG_GPIO_SCS)
-			return SCC_SS_PCI;
-		return SCC_SS_XTAL;
-	} else if (ai_get_ccrev(&sii->pub) < 10) {
-		return bcma_read32(cc, CHIPCREGOFFS(slow_clk_ctl)) &
-		       SCC_SS_MASK;
-	} else			/* Insta-clock */
-		return SCC_SS_XTAL;
+	return SCC_SS_XTAL;
 }
 
 /*
@@ -779,36 +654,12 @@ static uint ai_slowclk_src(struct si_pub *sih, struct bcma_device *cc)
 static uint ai_slowclk_freq(struct si_pub *sih, bool max_freq,
 			    struct bcma_device *cc)
 {
-	u32 slowclk;
 	uint div;
 
-	slowclk = ai_slowclk_src(sih, cc);
-	if (ai_get_ccrev(sih) < 6) {
-		if (slowclk == SCC_SS_PCI)
-			return max_freq ? (PCIMAXFREQ / 64)
-				: (PCIMINFREQ / 64);
-		else
-			return max_freq ? (XTALMAXFREQ / 32)
-				: (XTALMINFREQ / 32);
-	} else if (ai_get_ccrev(sih) < 10) {
-		div = 4 *
-		    (((bcma_read32(cc, CHIPCREGOFFS(slow_clk_ctl)) &
-		      SCC_CD_MASK) >> SCC_CD_SHIFT) + 1);
-		if (slowclk == SCC_SS_LPO)
-			return max_freq ? LPOMAXFREQ : LPOMINFREQ;
-		else if (slowclk == SCC_SS_XTAL)
-			return max_freq ? (XTALMAXFREQ / div)
-				: (XTALMINFREQ / div);
-		else if (slowclk == SCC_SS_PCI)
-			return max_freq ? (PCIMAXFREQ / div)
-				: (PCIMINFREQ / div);
-	} else {
-		/* Chipc rev 10 is InstaClock */
-		div = bcma_read32(cc, CHIPCREGOFFS(system_clk_ctl));
-		div = 4 * ((div >> SYCC_CD_SHIFT) + 1);
-		return max_freq ? XTALMAXFREQ : (XTALMINFREQ / div);
-	}
-	return 0;
+	/* Chipc rev 10 is InstaClock */
+	div = bcma_read32(cc, CHIPCREGOFFS(system_clk_ctl));
+	div = 4 * ((div >> SYCC_CD_SHIFT) + 1);
+	return max_freq ? XTALMAXFREQ : (XTALMINFREQ / div);
 }
 
 static void
@@ -831,8 +682,7 @@ ai_clkctl_setdelay(struct si_pub *sih, struct bcma_device *cc)
 
 	/* Starting with 4318 it is ILP that is used for the delays */
 	slowmaxfreq =
-	    ai_slowclk_freq(sih,
-			    (ai_get_ccrev(sih) >= 10) ? false : true, cc);
+	    ai_slowclk_freq(sih, false, cc);
 
 	pll_on_delay = ((slowmaxfreq * pll_delay) + 999999) / 1000000;
 	fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000;
@@ -854,9 +704,8 @@ void ai_clkctl_init(struct si_pub *sih)
 		return;
 
 	/* set all Instaclk chip ILP to 1 MHz */
-	if (ai_get_ccrev(sih) >= 10)
-		bcma_maskset32(cc, CHIPCREGOFFS(system_clk_ctl), SYCC_CD_MASK,
-			       (ILP_DIV_1MHZ << SYCC_CD_SHIFT));
+	bcma_maskset32(cc, CHIPCREGOFFS(system_clk_ctl), SYCC_CD_MASK,
+		       (ILP_DIV_1MHZ << SYCC_CD_SHIFT));
 
 	ai_clkctl_setdelay(sih, cc);
 }
@@ -891,140 +740,6 @@ u16 ai_clkctl_fast_pwrup_delay(struct si_pub *sih)
 	return fpdelay;
 }
 
-/* turn primary xtal and/or pll off/on */
-int ai_clkctl_xtal(struct si_pub *sih, uint what, bool on)
-{
-	struct si_info *sii;
-	u32 in, out, outen;
-
-	sii = (struct si_info *)sih;
-
-	/* pcie core doesn't have any mapping to control the xtal pu */
-	if (PCIE(sih))
-		return -1;
-
-	pci_read_config_dword(sii->pcibus, PCI_GPIO_IN, &in);
-	pci_read_config_dword(sii->pcibus, PCI_GPIO_OUT, &out);
-	pci_read_config_dword(sii->pcibus, PCI_GPIO_OUTEN, &outen);
-
-	/*
-	 * Avoid glitching the clock if GPRS is already using it.
-	 * We can't actually read the state of the PLLPD so we infer it
-	 * by the value of XTAL_PU which *is* readable via gpioin.
-	 */
-	if (on && (in & PCI_CFG_GPIO_XTAL))
-		return 0;
-
-	if (what & XTAL)
-		outen |= PCI_CFG_GPIO_XTAL;
-	if (what & PLL)
-		outen |= PCI_CFG_GPIO_PLL;
-
-	if (on) {
-		/* turn primary xtal on */
-		if (what & XTAL) {
-			out |= PCI_CFG_GPIO_XTAL;
-			if (what & PLL)
-				out |= PCI_CFG_GPIO_PLL;
-			pci_write_config_dword(sii->pcibus,
-					       PCI_GPIO_OUT, out);
-			pci_write_config_dword(sii->pcibus,
-					       PCI_GPIO_OUTEN, outen);
-			udelay(XTAL_ON_DELAY);
-		}
-
-		/* turn pll on */
-		if (what & PLL) {
-			out &= ~PCI_CFG_GPIO_PLL;
-			pci_write_config_dword(sii->pcibus,
-					       PCI_GPIO_OUT, out);
-			mdelay(2);
-		}
-	} else {
-		if (what & XTAL)
-			out &= ~PCI_CFG_GPIO_XTAL;
-		if (what & PLL)
-			out |= PCI_CFG_GPIO_PLL;
-		pci_write_config_dword(sii->pcibus,
-				       PCI_GPIO_OUT, out);
-		pci_write_config_dword(sii->pcibus,
-				       PCI_GPIO_OUTEN, outen);
-	}
-
-	return 0;
-}
-
-/* clk control mechanism through chipcommon, no policy checking */
-static bool _ai_clkctl_cc(struct si_info *sii, uint mode)
-{
-	struct bcma_device *cc;
-	u32 scc;
-
-	/* chipcommon cores prior to rev6 don't support dynamic clock control */
-	if (ai_get_ccrev(&sii->pub) < 6)
-		return false;
-
-	cc = ai_findcore(&sii->pub, BCMA_CORE_CHIPCOMMON, 0);
-
-	if (!(ai_get_cccaps(&sii->pub) & CC_CAP_PWR_CTL) &&
-	    (ai_get_ccrev(&sii->pub) < 20))
-		return mode == CLK_FAST;
-
-	switch (mode) {
-	case CLK_FAST:		/* FORCEHT, fast (pll) clock */
-		if (ai_get_ccrev(&sii->pub) < 10) {
-			/*
-			 * don't forget to force xtal back
-			 * on before we clear SCC_DYN_XTAL..
-			 */
-			ai_clkctl_xtal(&sii->pub, XTAL, ON);
-			bcma_maskset32(cc, CHIPCREGOFFS(slow_clk_ctl),
-				       (SCC_XC | SCC_FS | SCC_IP), SCC_IP);
-		} else if (ai_get_ccrev(&sii->pub) < 20) {
-			bcma_set32(cc, CHIPCREGOFFS(system_clk_ctl), SYCC_HR);
-		} else {
-			bcma_set32(cc, CHIPCREGOFFS(clk_ctl_st), CCS_FORCEHT);
-		}
-
-		/* wait for the PLL */
-		if (ai_get_cccaps(&sii->pub) & CC_CAP_PMU) {
-			u32 htavail = CCS_HTAVAIL;
-			SPINWAIT(((bcma_read32(cc, CHIPCREGOFFS(clk_ctl_st)) &
-				   htavail) == 0), PMU_MAX_TRANSITION_DLY);
-		} else {
-			udelay(PLL_DELAY);
-		}
-		break;
-
-	case CLK_DYNAMIC:	/* enable dynamic clock control */
-		if (ai_get_ccrev(&sii->pub) < 10) {
-			scc = bcma_read32(cc, CHIPCREGOFFS(slow_clk_ctl));
-			scc &= ~(SCC_FS | SCC_IP | SCC_XC);
-			if ((scc & SCC_SS_MASK) != SCC_SS_XTAL)
-				scc |= SCC_XC;
-			bcma_write32(cc, CHIPCREGOFFS(slow_clk_ctl), scc);
-
-			/*
-			 * for dynamic control, we have to
-			 * release our xtal_pu "force on"
-			 */
-			if (scc & SCC_XC)
-				ai_clkctl_xtal(&sii->pub, XTAL, OFF);
-		} else if (ai_get_ccrev(&sii->pub) < 20) {
-			/* Instaclock */
-			bcma_mask32(cc, CHIPCREGOFFS(system_clk_ctl), ~SYCC_HR);
-		} else {
-			bcma_mask32(cc, CHIPCREGOFFS(clk_ctl_st), ~CCS_FORCEHT);
-		}
-		break;
-
-	default:
-		break;
-	}
-
-	return mode == CLK_FAST;
-}
-
 /*
  *  clock control policy function throught chipcommon
  *
@@ -1033,133 +748,53 @@ static bool _ai_clkctl_cc(struct si_info *sii, uint mode)
  *    this is a wrapper over the next internal function
  *      to allow flexible policy settings for outside caller
  */
-bool ai_clkctl_cc(struct si_pub *sih, uint mode)
+bool ai_clkctl_cc(struct si_pub *sih, enum bcma_clkmode mode)
 {
 	struct si_info *sii;
+	struct bcma_device *cc;
 
 	sii = (struct si_info *)sih;
 
-	/* chipcommon cores prior to rev6 don't support dynamic clock control */
-	if (ai_get_ccrev(sih) < 6)
-		return false;
-
 	if (PCI_FORCEHT(sih))
-		return mode == CLK_FAST;
+		return mode == BCMA_CLKMODE_FAST;
 
-	return _ai_clkctl_cc(sii, mode);
+	cc = ai_findcore(&sii->pub, BCMA_CORE_CHIPCOMMON, 0);
+	bcma_core_set_clockmode(cc, mode);
+	return mode == BCMA_CLKMODE_FAST;
 }
 
 void ai_pci_up(struct si_pub *sih)
 {
 	struct si_info *sii;
+	struct bcma_device *cc;
 
 	sii = (struct si_info *)sih;
 
-	if (PCI_FORCEHT(sih))
-		_ai_clkctl_cc(sii, CLK_FAST);
+	if (PCI_FORCEHT(sih)) {
+		cc = ai_findcore(&sii->pub, BCMA_CORE_CHIPCOMMON, 0);
+		bcma_core_set_clockmode(cc, BCMA_CLKMODE_FAST);
+	}
 
 	if (PCIE(sih))
-		pcicore_up(sii->pch, SI_PCIUP);
-
-}
-
-/* Unconfigure and/or apply various WARs when system is going to sleep mode */
-void ai_pci_sleep(struct si_pub *sih)
-{
-	struct si_info *sii;
-
-	sii = (struct si_info *)sih;
-
-	pcicore_sleep(sii->pch);
+		bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci, true);
 }
 
 /* Unconfigure and/or apply various WARs when going down */
 void ai_pci_down(struct si_pub *sih)
 {
 	struct si_info *sii;
+	struct bcma_device *cc;
 
 	sii = (struct si_info *)sih;
 
 	/* release FORCEHT since chip is going to "down" state */
-	if (PCI_FORCEHT(sih))
-		_ai_clkctl_cc(sii, CLK_DYNAMIC);
-
-	pcicore_down(sii->pch, SI_PCIDOWN);
-}
-
-/*
- * Configure the pci core for pci client (NIC) action
- * coremask is the bitvec of cores by index to be enabled.
- */
-void ai_pci_setup(struct si_pub *sih, uint coremask)
-{
-	struct si_info *sii;
-	u32 w;
-
-	sii = (struct si_info *)sih;
-
-	/*
-	 * Enable sb->pci interrupts.  Assume
-	 * PCI rev 2.3 support was added in pci core rev 6 and things changed..
-	 */
-	if (PCIE(sih) || (PCI(sih) && (ai_get_buscorerev(sih) >= 6))) {
-		/* pci config write to set this core bit in PCIIntMask */
-		pci_read_config_dword(sii->pcibus, PCI_INT_MASK, &w);
-		w |= (coremask << PCI_SBIM_SHIFT);
-		pci_write_config_dword(sii->pcibus, PCI_INT_MASK, w);
-	}
-
-	if (PCI(sih)) {
-		pcicore_pci_setup(sii->pch);
+	if (PCI_FORCEHT(sih)) {
+		cc = ai_findcore(&sii->pub, BCMA_CORE_CHIPCOMMON, 0);
+		bcma_core_set_clockmode(cc, BCMA_CLKMODE_DYNAMIC);
 	}
-}
 
-/*
- * Fixup SROMless PCI device's configuration.
- * The current core may be changed upon return.
- */
-int ai_pci_fixcfg(struct si_pub *sih)
-{
-	struct si_info *sii = (struct si_info *)sih;
-
-	/* Fixup PI in SROM shadow area to enable the correct PCI core access */
-	/* check 'pi' is correct and fix it if not */
-	pcicore_fixcfg(sii->pch);
-	pcicore_hwup(sii->pch);
-	return 0;
-}
-
-/* mask&set gpiocontrol bits */
-u32 ai_gpiocontrol(struct si_pub *sih, u32 mask, u32 val, u8 priority)
-{
-	uint regoff;
-
-	regoff = offsetof(struct chipcregs, gpiocontrol);
-	return ai_cc_reg(sih, regoff, mask, val);
-}
-
-void ai_chipcontrl_epa4331(struct si_pub *sih, bool on)
-{
-	struct bcma_device *cc;
-	u32 val;
-
-	cc = ai_findcore(sih, CC_CORE_ID, 0);
-
-	if (on) {
-		if (ai_get_chippkg(sih) == 9 || ai_get_chippkg(sih) == 0xb)
-			/* Ext PA Controls for 4331 12x9 Package */
-			bcma_set32(cc, CHIPCREGOFFS(chipcontrol),
-				   CCTRL4331_EXTPA_EN |
-				   CCTRL4331_EXTPA_ON_GPIO2_5);
-		else
-			/* Ext PA Controls for 4331 12x12 Package */
-			bcma_set32(cc, CHIPCREGOFFS(chipcontrol),
-				   CCTRL4331_EXTPA_EN);
-	} else {
-		val &= ~(CCTRL4331_EXTPA_EN | CCTRL4331_EXTPA_ON_GPIO2_5);
-		bcma_mask32(cc, CHIPCREGOFFS(chipcontrol),
-			    ~(CCTRL4331_EXTPA_EN | CCTRL4331_EXTPA_ON_GPIO2_5));
-	}
+	if (PCIE(sih))
+		bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci, false);
 }
 
 /* Enable BT-COEX & Ex-PA for 4313 */
@@ -1181,6 +816,9 @@ bool ai_deviceremoved(struct si_pub *sih)
 
 	sii = (struct si_info *)sih;
 
+	if (sii->icbus->hosttype != BCMA_HOSTTYPE_PCI)
+		return false;
+
 	pci_read_config_dword(sii->pcibus, PCI_VENDOR_ID, &w);
 	if ((w & 0xFFFF) != PCI_VENDOR_ID_BROADCOM)
 		return true;
@@ -1188,45 +826,6 @@ bool ai_deviceremoved(struct si_pub *sih)
 	return false;
 }
 
-bool ai_is_sprom_available(struct si_pub *sih)
-{
-	struct si_info *sii = (struct si_info *)sih;
-
-	if (ai_get_ccrev(sih) >= 31) {
-		struct bcma_device *cc;
-		u32 sromctrl;
-
-		if ((ai_get_cccaps(sih) & CC_CAP_SROM) == 0)
-			return false;
-
-		cc = ai_findcore(sih, BCMA_CORE_CHIPCOMMON, 0);
-		sromctrl = bcma_read32(cc, CHIPCREGOFFS(sromcontrol));
-		return sromctrl & SRC_PRESENT;
-	}
-
-	switch (ai_get_chip_id(sih)) {
-	case BCM4313_CHIP_ID:
-		return (sii->chipst & CST4313_SPROM_PRESENT) != 0;
-	default:
-		return true;
-	}
-}
-
-bool ai_is_otp_disabled(struct si_pub *sih)
-{
-	struct si_info *sii = (struct si_info *)sih;
-
-	switch (ai_get_chip_id(sih)) {
-	case BCM4313_CHIP_ID:
-		return (sii->chipst & CST4313_OTP_PRESENT) == 0;
-		/* These chips always have their OTP on */
-	case BCM43224_CHIP_ID:
-	case BCM43225_CHIP_ID:
-	default:
-		return false;
-	}
-}
-
 uint ai_get_buscoretype(struct si_pub *sih)
 {
 	struct si_info *sii = (struct si_info *)sih;
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h
index f84c6f78169..d9f04a683bd 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h
+++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h
@@ -113,10 +113,6 @@
 #define	XTAL			0x1	/* primary crystal oscillator (2050) */
 #define	PLL			0x2	/* main chip pll */
 
-/* clkctl clk mode */
-#define	CLK_FAST		0	/* force fast (pll) clock */
-#define	CLK_DYNAMIC		2	/* enable dynamic clock control */
-
 /* GPIO usage priorities */
 #define GPIO_DRV_PRIORITY	0	/* Driver */
 #define GPIO_APP_PRIORITY	1	/* Application */
@@ -172,9 +168,7 @@ struct si_info {
 	struct si_pub pub;	/* back plane public state (must be first) */
 	struct bcma_bus *icbus;	/* handle to soc interconnect bus */
 	struct pci_dev *pcibus;	/* handle to pci bus */
-	struct pcicore_info *pch; /* PCI/E core handle */
 	struct bcma_device *buscore;
-	struct list_head var_list; /* list of srom variables */
 
 	u32 chipst;		/* chip status */
 };
@@ -197,38 +191,20 @@ extern u32 ai_core_cflags(struct bcma_device *core, u32 mask, u32 val);
 extern struct si_pub *ai_attach(struct bcma_bus *pbus);
 extern void ai_detach(struct si_pub *sih);
 extern uint ai_cc_reg(struct si_pub *sih, uint regoff, u32 mask, u32 val);
-extern void ai_pci_setup(struct si_pub *sih, uint coremask);
 extern void ai_clkctl_init(struct si_pub *sih);
 extern u16 ai_clkctl_fast_pwrup_delay(struct si_pub *sih);
 extern bool ai_clkctl_cc(struct si_pub *sih, uint mode);
-extern int ai_clkctl_xtal(struct si_pub *sih, uint what, bool on);
 extern bool ai_deviceremoved(struct si_pub *sih);
-extern u32 ai_gpiocontrol(struct si_pub *sih, u32 mask, u32 val,
-			     u8 priority);
-
-/* OTP status */
-extern bool ai_is_otp_disabled(struct si_pub *sih);
-
-/* SPROM availability */
-extern bool ai_is_sprom_available(struct si_pub *sih);
 
-extern void ai_pci_sleep(struct si_pub *sih);
 extern void ai_pci_down(struct si_pub *sih);
 extern void ai_pci_up(struct si_pub *sih);
-extern int ai_pci_fixcfg(struct si_pub *sih);
 
-extern void ai_chipcontrl_epa4331(struct si_pub *sih, bool on);
 /* Enable Ex-PA for 4313 */
 extern void ai_epa_4313war(struct si_pub *sih);
 
 extern uint ai_get_buscoretype(struct si_pub *sih);
 extern uint ai_get_buscorerev(struct si_pub *sih);
 
-static inline int ai_get_ccrev(struct si_pub *sih)
-{
-	return sih->ccrev;
-}
-
 static inline u32 ai_get_cccaps(struct si_pub *sih)
 {
 	return sih->cccaps;
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/antsel.c b/drivers/net/wireless/brcm80211/brcmsmac/antsel.c