diff options
Diffstat (limited to 'include/asm-mips/serial.h')
| -rw-r--r-- | include/asm-mips/serial.h | 444 |
1 files changed, 0 insertions, 444 deletions
diff --git a/include/asm-mips/serial.h b/include/asm-mips/serial.h deleted file mode 100644 index 8a70ff58f76..00000000000 --- a/include/asm-mips/serial.h +++ /dev/null @@ -1,444 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1999 by Ralf Baechle - * Copyright (C) 1999, 2000 Silicon Graphics, Inc. - */ -#ifndef _ASM_SERIAL_H -#define _ASM_SERIAL_H - -#include <linux/config.h> - -/* - * This assumes you have a 1.8432 MHz clock for your UART. - * - * It'd be nice if someone built a serial card with a 24.576 MHz - * clock, since the 16550A is capable of handling a top speed of 1.5 - * megabits/second; but this requires the faster clock. - */ -#define BASE_BAUD (1843200 / 16) - -/* Standard COM flags (except for COM4, because of the 8514 problem) */ -#ifdef CONFIG_SERIAL_DETECT_IRQ -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ) -#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ) -#else -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) -#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF -#endif - -#ifdef CONFIG_SERIAL_MANY_PORTS -#define FOURPORT_FLAGS ASYNC_FOURPORT -#define ACCENT_FLAGS 0 -#define BOCA_FLAGS 0 -#define HUB6_FLAGS 0 -#define RS_TABLE_SIZE 64 -#else -#define RS_TABLE_SIZE -#endif - -/* - * The following define the access methods for the HUB6 card. All - * access is through two ports for all 24 possible chips. The card is - * selected through the high 2 bits, the port on that card with the - * "middle" 3 bits, and the register on that port with the bottom - * 3 bits. - * - * While the access port and interrupt is configurable, the default - * port locations are 0x302 for the port control register, and 0x303 - * for the data read/write register. Normally, the interrupt is at irq3 - * but can be anything from 3 to 7 inclusive. Note that using 3 will - * require disabling com2. - */ - -#define C_P(card,port) (((card)<<6|(port)<<3) + 1) - -#ifdef CONFIG_MACH_JAZZ -#include <asm/jazz.h> - -#ifndef CONFIG_OLIVETTI_M700 - /* Some Jazz machines seem to have an 8MHz crystal clock but I don't know - exactly which ones ... XXX */ -#define JAZZ_BASE_BAUD ( 8000000 / 16 ) /* ( 3072000 / 16) */ -#else -/* but the M700 isn't such a strange beast */ -#define JAZZ_BASE_BAUD BASE_BAUD -#endif - -#define _JAZZ_SERIAL_INIT(int, base) \ - { .baud_base = JAZZ_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS, \ - .iomem_base = (u8 *) base, .iomem_reg_shift = 0, \ - .io_type = SERIAL_IO_MEM } -#define JAZZ_SERIAL_PORT_DEFNS \ - _JAZZ_SERIAL_INIT(JAZZ_SERIAL1_IRQ, JAZZ_SERIAL1_BASE), \ - _JAZZ_SERIAL_INIT(JAZZ_SERIAL2_IRQ, JAZZ_SERIAL2_BASE), -#else -#define JAZZ_SERIAL_PORT_DEFNS -#endif - -#ifdef CONFIG_MIPS_COBALT -#include <asm/cobalt/cobalt.h> -#define COBALT_BASE_BAUD (18432000 / 16) -#define COBALT_SERIAL_PORT_DEFNS \ - /* UART CLK PORT IRQ FLAGS */ \ - { 0, COBALT_BASE_BAUD, 0xc800000, COBALT_SERIAL_IRQ, STD_COM_FLAGS }, /* ttyS0 */ -#else -#define COBALT_SERIAL_PORT_DEFNS -#endif - -/* - * Both Galileo boards have the same UART mappings. - */ -#if defined (CONFIG_MIPS_EV96100) || defined (CONFIG_MIPS_EV64120) -#include <asm/galileo-boards/ev96100.h> -#include <asm/galileo-boards/ev96100int.h> -#define EV96100_SERIAL_PORT_DEFNS \ - { .baud_base = EV96100_BASE_BAUD, .irq = EV96100INT_UART_0, \ - .flags = STD_COM_FLAGS, \ - .iomem_base = EV96100_UART0_REGS_BASE, .iomem_reg_shift = 2, \ - .io_type = SERIAL_IO_MEM }, \ - { .baud_base = EV96100_BASE_BAUD, .irq = EV96100INT_UART_0, \ - .flags = STD_COM_FLAGS, \ - .iomem_base = EV96100_UART1_REGS_BASE, .iomem_reg_shift = 2, \ - .io_type = SERIAL_IO_MEM }, -#else -#define EV96100_SERIAL_PORT_DEFNS -#endif - -#ifdef CONFIG_MIPS_ITE8172 -#include <asm/it8172/it8172.h> -#include <asm/it8172/it8172_int.h> -#include <asm/it8712.h> -#define ITE_SERIAL_PORT_DEFNS \ - { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_UART_BASE), \ - .irq = IT8172_UART_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 }, \ - { .baud_base = (24000000/(16*13)), .port = (IT8172_PCI_IO_BASE + IT8712_UART1_PORT), \ - .irq = IT8172_SERIRQ_4, .flags = STD_COM_FLAGS, .type = 0x3 }, \ - /* Smart Card Reader 0 */ \ - { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR0_BASE), \ - .irq = IT8172_SCR0_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 }, \ - /* Smart Card Reader 1 */ \ - { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR1_BASE), \ - .irq = IT8172_SCR1_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 }, -#else -#define ITE_SERIAL_PORT_DEFNS -#endif - -#ifdef CONFIG_MIPS_IVR -#include <asm/it8172/it8172.h> -#include <asm/it8172/it8172_int.h> -#define IVR_SERIAL_PORT_DEFNS \ - { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_UART_BASE), \ - .irq = IT8172_UART_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 }, \ - /* Smart Card Reader 1 */ \ - { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR1_BASE), \ - .irq = IT8172_SCR1_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 }, -#else -#define IVR_SERIAL_PORT_DEFNS -#endif - -#ifdef CONFIG_TOSHIBA_JMR3927 -#include <asm/jmr3927/jmr3927.h> -#define TXX927_SERIAL_PORT_DEFNS \ - { .baud_base = JMR3927_BASE_BAUD, .port = UART0_ADDR, .irq = UART0_INT, \ - .flags = UART0_FLAGS, .type = 1 }, \ - { .baud_base = JMR3927_BASE_BAUD, .port = UART1_ADDR, .irq = UART1_INT, \ - .flags = UART1_FLAGS, .type = 1 }, -#else -#define TXX927_SERIAL_PORT_DEFNS -#endif - -#ifdef CONFIG_SERIAL_AU1X00 -#include <asm/mach-au1x00/au1000.h> -#ifdef CONFIG_SOC_AU1000 -#define AU1000_SERIAL_PORT_DEFNS \ - { .baud_base = 0, .port = UART0_ADDR, \ - .iomem_base = (unsigned char *)UART0_ADDR, \ - .irq = AU1000_UART0_INT, .flags = STD_COM_FLAGS, \ - .iomem_reg_shift = 2 }, \ - { .baud_base = 0, .port = UART1_ADDR, \ - .iomem_base = (unsigned char *)UART1_ADDR, \ - .irq = AU1000_UART1_INT, .flags = STD_COM_FLAGS, \ - .iomem_reg_shift = 2 }, \ - { .baud_base = 0, .port = UART2_ADDR, \ - .iomem_base = (unsigned char *)UART2_ADDR, \ - .irq = AU1000_UART2_INT, .flags = STD_COM_FLAGS, \ - .iomem_reg_shift = 2 }, \ - { .baud_base = 0, .port = UART3_ADDR, \ - .iomem_base = (unsigned char *)UART3_ADDR, \ - .irq = AU1000_UART3_INT, .flags = STD_COM_FLAGS, \ - .iomem_reg_shift = 2 }, -#endif - -#ifdef CONFIG_SOC_AU1500 -#define AU1000_SERIAL_PORT_DEFNS \ - { .baud_base = 0, .port = UART0_ADDR, \ - .iomem_base = (unsigned char *)UART0_ADDR, \ - .irq = AU1500_UART0_INT, .flags = STD_COM_FLAGS, \ - .iomem_reg_shift = 2 }, \ - { .baud_base = 0, .port = UART3_ADDR, \ - .iomem_base = (unsigned char *)UART3_ADDR, \ - .irq = AU1500_UART3_INT, .flags = STD_COM_FLAGS, \ - .iomem_reg_shift = 2 }, -#endif - -#ifdef CONFIG_SOC_AU1100 -#define AU1000_SERIAL_PORT_DEFNS \ - { .baud_base = 0, .port = UART0_ADDR, \ - .iomem_base = (unsigned char *)UART0_ADDR, \ - .irq = AU1100_UART0_INT, .flags = STD_COM_FLAGS, \ - .iomem_reg_shift = 2 }, \ - { .baud_base = 0, .port = UART1_ADDR, \ - .iomem_base = (unsigned char *)UART1_ADDR, \ - .irq = AU1100_UART1_INT, .flags = STD_COM_FLAGS, \ - .iomem_reg_shift = 2 }, \ - { .baud_base = 0, .port = UART3_ADDR, \ - .iomem_base = (unsigned char *)UART3_ADDR, \ - .irq = AU1100_UART3_INT, .flags = STD_COM_FLAGS, \ - .iomem_reg_shift = 2 }, -#endif - -#ifdef CONFIG_SOC_AU1550 -#define AU1000_SERIAL_PORT_DEFNS \ - { .baud_base = 0, .port = UART0_ADDR, \ - .iomem_base = (unsigned char *)UART0_ADDR, \ - .irq = AU1550_UART0_INT, .flags = STD_COM_FLAGS, \ - .iomem_reg_shift = 2 }, \ - { .baud_base = 0, .port = UART1_ADDR, \ - .iomem_base = (unsigned char *)UART1_ADDR, \ - .irq = AU1550_UART1_INT, .flags = STD_COM_FLAGS, \ - .iomem_reg_shift = 2 }, \ - { .baud_base = 0, .port = UART3_ADDR, \ - .iomem_base = (unsigned char *)UART3_ADDR, \ - .irq = AU1550_UART3_INT, .flags = STD_COM_FLAGS,\ - .iomem_reg_shift = 2 }, -#endif - -#ifdef CONFIG_SOC_AU1200 -#define AU1000_SERIAL_PORT_DEFNS \ - { .baud_base = 0, .port = UART0_ADDR, \ - .iomem_base = (unsigned char *)UART0_ADDR, \ - .irq = AU1200_UART0_INT, .flags = STD_COM_FLAGS, \ - .iomem_reg_shift = 2 }, \ - { .baud_base = 0, .port = UART1_ADDR, \ - .iomem_base = (unsigned char *)UART1_ADDR, \ - .irq = AU1200_UART1_INT, .flags = STD_COM_FLAGS, \ - .iomem_reg_shift = 2 }, -#endif - -#else -#define AU1000_SERIAL_PORT_DEFNS -#endif - -#ifdef CONFIG_HAVE_STD_PC_SERIAL_PORT -#define STD_SERIAL_PORT_DEFNS \ - /* UART CLK PORT IRQ FLAGS */ \ - { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \ - { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \ - { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \ - { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */ - -#ifdef CONFIG_SERIAL_MANY_PORTS -#define EXTRA_SERIAL_PORT_DEFNS \ - { 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, /* ttyS4 */ \ - { 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS }, /* ttyS5 */ \ - { 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS }, /* ttyS6 */ \ - { 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS }, /* ttyS7 */ \ - { 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS }, /* ttyS8 */ \ - { 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS }, /* ttyS9 */ \ - { 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS }, /* ttyS10 */ \ - { 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS }, /* ttyS11 */ \ - { 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS }, /* ttyS12 */ \ - { 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS }, /* ttyS13 */ \ - { 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS14 (spare) */ \ - { 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS15 (spare) */ \ - { 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS }, /* ttyS16 */ \ - { 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS }, /* ttyS17 */ \ - { 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS }, /* ttyS18 */ \ - { 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS }, /* ttyS19 */ \ - { 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS }, /* ttyS20 */ \ - { 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS }, /* ttyS21 */ \ - { 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS }, /* ttyS22 */ \ - { 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS }, /* ttyS23 */ \ - { 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS }, /* ttyS24 */ \ - { 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS }, /* ttyS25 */ \ - { 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS }, /* ttyS26 */ \ - { 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS }, /* ttyS27 */ \ - { 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS }, /* ttyS28 */ \ - { 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS }, /* ttyS29 */ \ - { 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS }, /* ttyS30 */ \ - { 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS }, /* ttyS31 */ -#else /* CONFIG_SERIAL_MANY_PORTS */ -#define EXTRA_SERIAL_PORT_DEFNS -#endif /* CONFIG_SERIAL_MANY_PORTS */ - -#else /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */ -#define STD_SERIAL_PORT_DEFNS -#define EXTRA_SERIAL_PORT_DEFNS -#endif /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */ - -/* You can have up to four HUB6's in the system, but I've only - * included two cards here for a total of twelve ports. - */ -#if (defined(CONFIG_HUB6) && defined(CONFIG_SERIAL_MANY_PORTS)) -#define HUB6_SERIAL_PORT_DFNS \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,0) }, /* ttyS32 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,1) }, /* ttyS33 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,2) }, /* ttyS34 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,3) }, /* ttyS35 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,4) }, /* ttyS36 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,5) }, /* ttyS37 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,0) }, /* ttyS38 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,1) }, /* ttyS39 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,2) }, /* ttyS40 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,3) }, /* ttyS41 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,4) }, /* ttyS42 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,5) }, /* ttyS43 */ -#else -#define HUB6_SERIAL_PORT_DFNS -#endif - -#ifdef CONFIG_MOMENCO_JAGUAR_ATX -/* Ordinary NS16552 duart with a 20MHz crystal. */ -#define JAGUAR_ATX_UART_CLK 20000000 -#define JAGUAR_ATX_BASE_BAUD (JAGUAR_ATX_UART_CLK / 16) - -#define JAGUAR_ATX_SERIAL1_IRQ 6 -#define JAGUAR_ATX_SERIAL1_BASE 0xfd000023L - -#define _JAGUAR_ATX_SERIAL_INIT(int, base) \ - { baud_base: JAGUAR_ATX_BASE_BAUD, irq: int, \ - flags: (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ - iomem_base: (u8 *) base, iomem_reg_shift: 2, \ - io_type: SERIAL_IO_MEM } -#define MOMENCO_JAGUAR_ATX_SERIAL_PORT_DEFNS \ - _JAGUAR_ATX_SERIAL_INIT(JAGUAR_ATX_SERIAL1_IRQ, JAGUAR_ATX_SERIAL1_BASE) -#else -#define MOMENCO_JAGUAR_ATX_SERIAL_PORT_DEFNS -#endif - -#ifdef CONFIG_MOMENCO_OCELOT_3 -#define OCELOT_3_BASE_BAUD ( 20000000 / 16 ) -#define OCELOT_3_SERIAL_IRQ 6 -#define OCELOT_3_SERIAL_BASE (signed)0xfd000020 - -#define _OCELOT_3_SERIAL_INIT(int, base) \ - { baud_base: OCELOT_3_BASE_BAUD, irq: int, \ - flags: STD_COM_FLAGS, \ - iomem_base: (u8 *) base, iomem_reg_shift: 2, \ - io_type: SERIAL_IO_MEM } - -#define MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS \ - _OCELOT_3_SERIAL_INIT(OCELOT_3_SERIAL_IRQ, OCELOT_3_SERIAL_BASE) -#else -#define MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS -#endif - -#ifdef CONFIG_MOMENCO_OCELOT -/* Ordinary NS16552 duart with a 20MHz crystal. */ -#define OCELOT_BASE_BAUD ( 20000000 / 16 ) - -#define OCELOT_SERIAL1_IRQ 4 -#define OCELOT_SERIAL1_BASE 0xe0001020 - -#define _OCELOT_SERIAL_INIT(int, base) \ - { .baud_base = OCELOT_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS, \ - .iomem_base = (u8 *) base, .iomem_reg_shift = 2, \ - .io_type = SERIAL_IO_MEM } -#define MOMENCO_OCELOT_SERIAL_PORT_DEFNS \ - _OCELOT_SERIAL_INIT(OCELOT_SERIAL1_IRQ, OCELOT_SERIAL1_BASE) -#else -#define MOMENCO_OCELOT_SERIAL_PORT_DEFNS -#endif - -#ifdef CONFIG_MOMENCO_OCELOT_G -/* Ordinary NS16552 duart with a 20MHz crystal. */ -#define OCELOT_G_BASE_BAUD ( 20000000 / 16 ) - -#define OCELOT_G_SERIAL1_IRQ 4 -#if 0 -#define OCELOT_G_SERIAL1_BASE 0xe0001020 -#else -#define OCELOT_G_SERIAL1_BASE 0xfd000020 -#endif - -#define _OCELOT_G_SERIAL_INIT(int, base) \ - { .baud_base = OCELOT_G_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS,\ - .iomem_base = (u8 *) base, .iomem_reg_shift = 2, \ - .io_type = SERIAL_IO_MEM } -#define MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS \ - _OCELOT_G_SERIAL_INIT(OCELOT_G_SERIAL1_IRQ, OCELOT_G_SERIAL1_BASE) -#else -#define MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS -#endif - -#ifdef CONFIG_MOMENCO_OCELOT_C -/* Ordinary NS16552 duart with a 20MHz crystal. */ -#define OCELOT_C_BASE_BAUD ( 20000000 / 16 ) - -#define OCELOT_C_SERIAL1_IRQ 80 -#define OCELOT_C_SERIAL1_BASE 0xfd000020 - -#define OCELOT_C_SERIAL2_IRQ 81 -#define OCELOT_C_SERIAL2_BASE 0xfd000000 - -#define _OCELOT_C_SERIAL_INIT(int, base) \ - { .baud_base = OCELOT_C_BASE_BAUD, \ - .irq = (int), \ - .flags = STD_COM_FLAGS, \ - .iomem_base = (u8 *) base, \ - .iomem_reg_shift = 2, \ - .io_type = SERIAL_IO_MEM \ - } -#define MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS \ - _OCELOT_C_SERIAL_INIT(OCELOT_C_SERIAL1_IRQ, OCELOT_C_SERIAL1_BASE), \ - _OCELOT_C_SERIAL_INIT(OCELOT_C_SERIAL2_IRQ, OCELOT_C_SERIAL2_BASE) -#else -#define MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS -#endif - -#ifdef CONFIG_DDB5477 -#include <asm/ddb5xxx/ddb5477.h> -#define DDB5477_SERIAL_PORT_DEFNS \ - { .baud_base = BASE_BAUD, .irq = VRC5477_IRQ_UART0, \ - .flags = STD_COM_FLAGS, .iomem_base = (u8*)0xbfa04200, \ - .iomem_reg_shift = 3, .io_type = SERIAL_IO_MEM}, \ - { .baud_base = BASE_BAUD, .irq = VRC5477_IRQ_UART1, \ - .flags = STD_COM_FLAGS, .iomem_base = (u8*)0xbfa04240, \ - .iomem_reg_shift = 3, .io_type = SERIAL_IO_MEM}, -#else -#define DDB5477_SERIAL_PORT_DEFNS -#endif - -#ifdef CONFIG_SGI_IP32 -/* - * The IP32 (SGI O2) has standard serial ports (UART 16550A) mapped in memory - * They are initialized in ip32_setup - */ -#define IP32_SERIAL_PORT_DEFNS \ - {},{}, -#else -#define IP32_SERIAL_PORT_DEFNS -#endif /* CONFIG_SGI_IP32 */ - -#define SERIAL_PORT_DFNS \ - COBALT_SERIAL_PORT_DEFNS \ - DDB5477_SERIAL_PORT_DEFNS \ - EV96100_SERIAL_PORT_DEFNS \ - EXTRA_SERIAL_PORT_DEFNS \ - HUB6_SERIAL_PORT_DFNS \ - IP32_SERIAL_PORT_DEFNS \ - ITE_SERIAL_PORT_DEFNS \ - IVR_SERIAL_PORT_DEFNS \ - JAZZ_SERIAL_PORT_DEFNS \ - STD_SERIAL_PORT_DEFNS \ - MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS \ - MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS \ - MOMENCO_OCELOT_SERIAL_PORT_DEFNS \ - MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS \ - TXX927_SERIAL_PORT_DEFNS \ - AU1000_SERIAL_PORT_DEFNS - -#endif /* _ASM_SERIAL_H */ |