aboutsummaryrefslogtreecommitdiff
path: root/include/asm-ia64/mca_asm.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-ia64/mca_asm.h')
-rw-r--r--include/asm-ia64/mca_asm.h312
1 files changed, 0 insertions, 312 deletions
diff --git a/include/asm-ia64/mca_asm.h b/include/asm-ia64/mca_asm.h
deleted file mode 100644
index 836953e0f91..00000000000
--- a/include/asm-ia64/mca_asm.h
+++ /dev/null
@@ -1,312 +0,0 @@
-/*
- * File: mca_asm.h
- *
- * Copyright (C) 1999 Silicon Graphics, Inc.
- * Copyright (C) Vijay Chander (vijay@engr.sgi.com)
- * Copyright (C) Srinivasa Thirumalachar <sprasad@engr.sgi.com>
- * Copyright (C) 2000 Hewlett-Packard Co.
- * Copyright (C) 2000 David Mosberger-Tang <davidm@hpl.hp.com>
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2002 Jenna Hall <jenna.s.hall@intel.com>
- */
-#ifndef _ASM_IA64_MCA_ASM_H
-#define _ASM_IA64_MCA_ASM_H
-
-#define PSR_IC 13
-#define PSR_I 14
-#define PSR_DT 17
-#define PSR_RT 27
-#define PSR_MC 35
-#define PSR_IT 36
-#define PSR_BN 44
-
-/*
- * This macro converts a instruction virtual address to a physical address
- * Right now for simulation purposes the virtual addresses are
- * direct mapped to physical addresses.
- * 1. Lop off bits 61 thru 63 in the virtual address
- */
-#define INST_VA_TO_PA(addr) \
- dep addr = 0, addr, 61, 3
-/*
- * This macro converts a data virtual address to a physical address
- * Right now for simulation purposes the virtual addresses are
- * direct mapped to physical addresses.
- * 1. Lop off bits 61 thru 63 in the virtual address
- */
-#define DATA_VA_TO_PA(addr) \
- tpa addr = addr
-/*
- * This macro converts a data physical address to a virtual address
- * Right now for simulation purposes the virtual addresses are
- * direct mapped to physical addresses.
- * 1. Put 0x7 in bits 61 thru 63.
- */
-#define DATA_PA_TO_VA(addr,temp) \
- mov temp = 0x7 ;; \
- dep addr = temp, addr, 61, 3
-
-#define GET_THIS_PADDR(reg, var) \
- mov reg = IA64_KR(PER_CPU_DATA);; \
- addl reg = THIS_CPU(var), reg
-
-/*
- * This macro jumps to the instruction at the given virtual address
- * and starts execution in physical mode with all the address
- * translations turned off.
- * 1. Save the current psr
- * 2. Make sure that all the upper 32 bits are off
- *
- * 3. Clear the interrupt enable and interrupt state collection bits
- * in the psr before updating the ipsr and iip.
- *
- * 4. Turn off the instruction, data and rse translation bits of the psr
- * and store the new value into ipsr
- * Also make sure that the interrupts are disabled.
- * Ensure that we are in little endian mode.
- * [psr.{rt, it, dt, i, be} = 0]
- *
- * 5. Get the physical address corresponding to the virtual address
- * of the next instruction bundle and put it in iip.
- * (Using magic numbers 24 and 40 in the deposint instruction since
- * the IA64_SDK code directly maps to lower 24bits as physical address
- * from a virtual address).
- *
- * 6. Do an rfi to move the values from ipsr to psr and iip to ip.
- */
-#define PHYSICAL_MODE_ENTER(temp1, temp2, start_addr, old_psr) \
- mov old_psr = psr; \
- ;; \
- dep old_psr = 0, old_psr, 32, 32; \
- \
- mov ar.rsc = 0 ; \
- ;; \
- srlz.d; \
- mov temp2 = ar.bspstore; \
- ;; \
- DATA_VA_TO_PA(temp2); \
- ;; \
- mov temp1 = ar.rnat; \
- ;; \
- mov ar.bspstore = temp2; \
- ;; \
- mov ar.rnat = temp1; \
- mov temp1 = psr; \
- mov temp2 = psr; \
- ;; \
- \
- dep temp2 = 0, temp2, PSR_IC, 2; \
- ;; \
- mov psr.l = temp2; \
- ;; \
- srlz.d; \
- dep temp1 = 0, temp1, 32, 32; \
- ;; \
- dep temp1 = 0, temp1, PSR_IT, 1; \
- ;; \
- dep temp1 = 0, temp1, PSR_DT, 1; \
- ;; \
- dep temp1 = 0, temp1, PSR_RT, 1; \
- ;; \
- dep temp1 = 0, temp1, PSR_I, 1; \
- ;; \
- dep temp1 = 0, temp1, PSR_IC, 1; \
- ;; \
- dep temp1 = -1, temp1, PSR_MC, 1; \
- ;; \
- mov cr.ipsr = temp1; \
- ;; \
- LOAD_PHYSICAL(p0, temp2, start_addr); \
- ;; \
- mov cr.iip = temp2; \
- mov cr.ifs = r0; \
- DATA_VA_TO_PA(sp); \
- DATA_VA_TO_PA(gp); \
- ;; \
- srlz.i; \
- ;; \
- nop 1; \
- nop 2; \
- nop 1; \
- nop 2; \
- rfi; \
- ;;
-
-/*
- * This macro jumps to the instruction at the given virtual address
- * and starts execution in virtual mode with all the address
- * translations turned on.
- * 1. Get the old saved psr
- *
- * 2. Clear the interrupt state collection bit in the current psr.
- *
- * 3. Set the instruction translation bit back in the old psr
- * Note we have to do this since we are right now saving only the
- * lower 32-bits of old psr.(Also the old psr has the data and
- * rse translation bits on)
- *
- * 4. Set ipsr to this old_psr with "it" bit set and "bn" = 1.
- *
- * 5. Reset the current thread pointer (r13).
- *
- * 6. Set iip to the virtual address of the next instruction bundle.
- *
- * 7. Do an rfi to move ipsr to psr and iip to ip.
- */
-
-#define VIRTUAL_MODE_ENTER(temp1, temp2, start_addr, old_psr) \
- mov temp2 = psr; \
- ;; \
- mov old_psr = temp2; \
- ;; \
- dep temp2 = 0, temp2, PSR_IC, 2; \
- ;; \
- mov psr.l = temp2; \
- mov ar.rsc = 0; \
- ;; \
- srlz.d; \
- mov r13 = ar.k6; \
- mov temp2 = ar.bspstore; \
- ;; \
- DATA_PA_TO_VA(temp2,temp1); \
- ;; \
- mov temp1 = ar.rnat; \
- ;; \
- mov ar.bspstore = temp2; \
- ;; \
- mov ar.rnat = temp1; \
- ;; \
- mov temp1 = old_psr; \
- ;; \
- mov temp2 = 1; \
- ;; \
- dep temp1 = temp2, temp1, PSR_IC, 1; \
- ;; \
- dep temp1 = temp2, temp1, PSR_IT, 1; \
- ;; \
- dep temp1 = temp2, temp1, PSR_DT, 1; \
- ;; \
- dep temp1 = temp2, temp1, PSR_RT, 1; \
- ;; \
- dep temp1 = temp2, temp1, PSR_BN, 1; \
- ;; \
- \
- mov cr.ipsr = temp1; \
- movl temp2 = start_addr; \
- ;; \
- mov cr.iip = temp2; \
- ;; \
- DATA_PA_TO_VA(sp, temp1); \
- DATA_PA_TO_VA(gp, temp2); \
- srlz.i; \
- ;; \
- nop 1; \
- nop 2; \
- nop 1; \
- rfi \
- ;;
-
-/*
- * The following offsets capture the order in which the
- * RSE related registers from the old context are
- * saved onto the new stack frame.
- *
- * +-----------------------+
- * |NDIRTY [BSP - BSPSTORE]|
- * +-----------------------+
- * | RNAT |
- * +-----------------------+
- * | BSPSTORE |
- * +-----------------------+
- * | IFS |
- * +-----------------------+
- * | PFS |
- * +-----------------------+
- * | RSC |
- * +-----------------------+ <-------- Bottom of new stack frame
- */
-#define rse_rsc_offset 0
-#define rse_pfs_offset (rse_rsc_offset+0x08)
-#define rse_ifs_offset (rse_pfs_offset+0x08)
-#define rse_bspstore_offset (rse_ifs_offset+0x08)
-#define rse_rnat_offset (rse_bspstore_offset+0x08)
-#define rse_ndirty_offset (rse_rnat_offset+0x08)
-
-/*
- * rse_switch_context
- *
- * 1. Save old RSC onto the new stack frame
- * 2. Save PFS onto new stack frame
- * 3. Cover the old frame and start a new frame.
- * 4. Save IFS onto new stack frame
- * 5. Save the old BSPSTORE on the new stack frame
- * 6. Save the old RNAT on the new stack frame
- * 7. Write BSPSTORE with the new backing store pointer
- * 8. Read and save the new BSP to calculate the #dirty registers
- * NOTE: Look at pages 11-10, 11-11 in PRM Vol 2
- */
-#define rse_switch_context(temp,p_stackframe,p_bspstore) \
- ;; \
- mov temp=ar.rsc;; \
- st8 [p_stackframe]=temp,8;; \
- mov temp=ar.pfs;; \
- st8 [p_stackframe]=temp,8; \
- cover ;; \
- mov temp=cr.ifs;; \
- st8 [p_stackframe]=temp,8;; \
- mov temp=ar.bspstore;; \
- st8 [p_stackframe]=temp,8;; \
- mov temp=ar.rnat;; \
- st8 [p_stackframe]=temp,8; \
- mov ar.bspstore=p_bspstore;; \
- mov temp=ar.bsp;; \
- sub temp=temp,p_bspstore;; \
- st8 [p_stackframe]=temp,8;;
-
-/*
- * rse_return_context
- * 1. Allocate a zero-sized frame
- * 2. Store the number of dirty registers RSC.loadrs field
- * 3. Issue a loadrs to insure that any registers from the interrupted
- * context which were saved on the new stack frame have been loaded
- * back into the stacked registers
- * 4. Restore BSPSTORE
- * 5. Restore RNAT
- * 6. Restore PFS
- * 7. Restore IFS
- * 8. Restore RSC
- * 9. Issue an RFI
- */
-#define rse_return_context(psr_mask_reg,temp,p_stackframe) \
- ;; \
- alloc temp=ar.pfs,0,0,0,0; \
- add p_stackframe=rse_ndirty_offset,p_stackframe;; \
- ld8 temp=[p_stackframe];; \
- shl temp=temp,16;; \
- mov ar.rsc=temp;; \
- loadrs;; \
- add p_stackframe=-rse_ndirty_offset+rse_bspstore_offset,p_stackframe;;\
- ld8 temp=[p_stackframe];; \
- mov ar.bspstore=temp;; \
- add p_stackframe=-rse_bspstore_offset+rse_rnat_offset,p_stackframe;;\
- ld8 temp=[p_stackframe];; \
- mov ar.rnat=temp;; \
- add p_stackframe=-rse_rnat_offset+rse_pfs_offset,p_stackframe;; \
- ld8 temp=[p_stackframe];; \
- mov ar.pfs=temp;; \
- add p_stackframe=-rse_pfs_offset+rse_ifs_offset,p_stackframe;; \
- ld8 temp=[p_stackframe];; \
- mov cr.ifs=temp;; \
- add p_stackframe=-rse_ifs_offset+rse_rsc_offset,p_stackframe;; \
- ld8 temp=[p_stackframe];; \
- mov ar.rsc=temp ; \
- mov temp=psr;; \
- or temp=temp,psr_mask_reg;; \
- mov cr.ipsr=temp;; \
- mov temp=ip;; \
- add temp=0x30,temp;; \
- mov cr.iip=temp;; \
- srlz.i;; \
- rfi;;
-
-#endif /* _ASM_IA64_MCA_ASM_H */
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-08 06:07:56 +0000