1 files changed, 0 insertions, 132 deletions
diff --git a/include/asm-arm/arch-omap/board.h b/include/asm-arm/arch-omap/board.h
deleted file mode 100644
index 95bd625480c..00000000000
--- a/include/asm-arm/arch-omap/board.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/board.h
- *
- *  Information structures for board-specific data
- *
- *  Copyright (C) 2004	Nokia Corporation
- *  Written by Juha Yrjölä <juha.yrjola@nokia.com>
- */
-
-#ifndef _OMAP_BOARD_H
-#define _OMAP_BOARD_H
-
-#include <linux/config.h>
-#include <linux/types.h>
-
-/* Different peripheral ids */
-#define OMAP_TAG_CLOCK		0x4f01
-#define OMAP_TAG_MMC		0x4f02
-#define OMAP_TAG_SERIAL_CONSOLE 0x4f03
-#define OMAP_TAG_USB		0x4f04
-#define OMAP_TAG_LCD		0x4f05
-#define OMAP_TAG_GPIO_SWITCH	0x4f06
-#define OMAP_TAG_UART		0x4f07
-
-#define OMAP_TAG_BOOT_REASON    0x4f80
-#define OMAP_TAG_FLASH_PART	0x4f81
-
-struct omap_clock_config {
-	/* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
-	u8 system_clock_type;
-};
-
-struct omap_mmc_config {
-	u8 mmc_blocks;
-	s16 mmc1_power_pin, mmc2_power_pin;
-	s16 mmc1_switch_pin, mmc2_switch_pin;
-};
-
-struct omap_serial_console_config {
-	u8 console_uart;
-	u32 console_speed;
-};
-
-struct omap_usb_config {
-	/* Configure drivers according to the connectors on your board:
-	 *  - "A" connector (rectagular)
-	 *	... for host/OHCI use, set "register_host".
-	 *  - "B" connector (squarish) or "Mini-B"
-	 *	... for device/gadget use, set "register_dev".
-	 *  - "Mini-AB" connector (very similar to Mini-B)
-	 *	... for OTG use as device OR host, initialize "otg"
-	 */
-	unsigned	register_host:1;
-	unsigned	register_dev:1;
-	u8		otg;	/* port number, 1-based:  usb1 == 2 */
-
-	u8		hmc_mode;
-
-	/* implicitly true if otg:  host supports remote wakeup? */
-	u8		rwc;
-
-	/* signaling pins used to talk to transceiver on usbN:
-	 *  0 == usbN unused
-	 *  2 == usb0-only, using internal transceiver
-	 *  3 == 3 wire bidirectional
-	 *  4 == 4 wire bidirectional
-	 *  6 == 6 wire unidirectional (or TLL)
-	 */
-	u8		pins[3];
-};
-
-struct omap_lcd_config {
-	char panel_name[16];
-	char ctrl_name[16];
-};
-
-/* Cover:
- *      high -> closed
- *      low  -> open
- * Connection:
- *      high -> connected
- *      low  -> disconnected
- */
-#define OMAP_GPIO_SWITCH_TYPE_COVER		0x0000
-#define OMAP_GPIO_SWITCH_TYPE_CONNECTION	0x0001
-#define OMAP_GPIO_SWITCH_FLAG_INVERTED		0x0001
-#define OMAP_GPIO_SWITCH_FLAG_OUTPUT		0x0002
-struct omap_gpio_switch_config {
-	char name[12];
-	u16 gpio;
-	int flags:4;
-	int type:4;
-	int key_code:24; /* Linux key code */
-};
-
-struct omap_flash_part_config {
-	char part_table[0];
-};
-
-struct omap_boot_reason_config {
-	char reason_str[12];
-};
-
-struct omap_uart_config {
-	/* Bit field of UARTs present; bit 0 --> UART1 */
-	unsigned int enabled_uarts;
-};
-
-struct omap_board_config_entry {
-	u16 tag;
-	u16 len;
-	u8  data[0];
-};
-
-struct omap_board_config_kernel {
-	u16 tag;
-	const void *data;
-};
-
-extern const void *__omap_get_config(u16 tag, size_t len, int nr);
-
-#define omap_get_config(tag, type) \
-	((const type *) __omap_get_config((tag), sizeof(type), 0))
-#define omap_get_nr_config(tag, type, nr) \
-	((const type *) __omap_get_config((tag), sizeof(type), (nr)))
-
-extern const void *omap_get_var_config(u16 tag, size_t *len);
-
-extern struct omap_board_config_kernel *omap_board_config;
-extern int omap_board_config_size;
-
-#endif