diff options
Diffstat (limited to 'include/acpi/acmacros.h')
| -rw-r--r-- | include/acpi/acmacros.h | 675 |
1 files changed, 0 insertions, 675 deletions
diff --git a/include/acpi/acmacros.h b/include/acpi/acmacros.h deleted file mode 100644 index 702cc4e57f5..00000000000 --- a/include/acpi/acmacros.h +++ /dev/null @@ -1,675 +0,0 @@ -/****************************************************************************** - * - * Name: acmacros.h - C macros for the entire subsystem. - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2005, R. Byron Moore - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -#ifndef __ACMACROS_H__ -#define __ACMACROS_H__ - -/* - * Data manipulation macros - */ -#define ACPI_LOWORD(l) ((u16)(u32)(l)) -#define ACPI_HIWORD(l) ((u16)((((u32)(l)) >> 16) & 0xFFFF)) -#define ACPI_LOBYTE(l) ((u8)(u16)(l)) -#define ACPI_HIBYTE(l) ((u8)((((u16)(l)) >> 8) & 0xFF)) - -#define ACPI_SET_BIT(target,bit) ((target) |= (bit)) -#define ACPI_CLEAR_BIT(target,bit) ((target) &= ~(bit)) -#define ACPI_MIN(a,b) (((a)<(b))?(a):(b)) - -#if ACPI_MACHINE_WIDTH == 16 - -/* - * For 16-bit addresses, we have to assume that the upper 32 bits - * are zero. - */ -#define ACPI_LODWORD(l) ((u32)(l)) -#define ACPI_HIDWORD(l) ((u32)(0)) - -#define ACPI_GET_ADDRESS(a) ((a).lo) -#define ACPI_STORE_ADDRESS(a,b) {(a).hi=0;(a).lo=(u32)(b);} -#define ACPI_VALID_ADDRESS(a) ((a).hi | (a).lo) - -#else -#ifdef ACPI_NO_INTEGER64_SUPPORT -/* - * acpi_integer is 32-bits, no 64-bit support on this platform - */ -#define ACPI_LODWORD(l) ((u32)(l)) -#define ACPI_HIDWORD(l) ((u32)(0)) - -#define ACPI_GET_ADDRESS(a) (a) -#define ACPI_STORE_ADDRESS(a,b) ((a)=(b)) -#define ACPI_VALID_ADDRESS(a) (a) - -#else - -/* - * Full 64-bit address/integer on both 32-bit and 64-bit platforms - */ -#define ACPI_LODWORD(l) ((u32)(u64)(l)) -#define ACPI_HIDWORD(l) ((u32)(((*(struct uint64_struct *)(void *)(&l))).hi)) - -#define ACPI_GET_ADDRESS(a) (a) -#define ACPI_STORE_ADDRESS(a,b) ((a)=(acpi_physical_address)(b)) -#define ACPI_VALID_ADDRESS(a) (a) -#endif -#endif - -/* - * printf() format helpers - */ - -/* Split 64-bit integer into two 32-bit values. Use with %8.8X%8.8X */ - -#define ACPI_FORMAT_UINT64(i) ACPI_HIDWORD(i),ACPI_LODWORD(i) - -/* - * Extract a byte of data using a pointer. Any more than a byte and we - * get into potential aligment issues -- see the STORE macros below - */ -#define ACPI_GET8(addr) (*(u8*)(addr)) - -/* Pointer arithmetic */ - -#define ACPI_PTR_ADD(t,a,b) (t *) (void *)((char *)(a) + (acpi_native_uint)(b)) -#define ACPI_PTR_DIFF(a,b) (acpi_native_uint) ((char *)(a) - (char *)(b)) - -/* Pointer/Integer type conversions */ - -#define ACPI_TO_POINTER(i) ACPI_PTR_ADD (void, (void *) NULL,(acpi_native_uint)i) -#define ACPI_TO_INTEGER(p) ACPI_PTR_DIFF (p,(void *) NULL) -#define ACPI_OFFSET(d,f) (acpi_size) ACPI_PTR_DIFF (&(((d *)0)->f),(void *) NULL) -#define ACPI_FADT_OFFSET(f) ACPI_OFFSET (FADT_DESCRIPTOR, f) - -#define ACPI_CAST_PTR(t, p) ((t *)(void *)(p)) -#define ACPI_CAST_INDIRECT_PTR(t, p) ((t **)(void *)(p)) - -#if ACPI_MACHINE_WIDTH == 16 -#define ACPI_STORE_POINTER(d,s) ACPI_MOVE_32_TO_32(d,s) -#define ACPI_PHYSADDR_TO_PTR(i) (void *)(i) -#define ACPI_PTR_TO_PHYSADDR(i) (u32) (char *)(i) -#else -#define ACPI_PHYSADDR_TO_PTR(i) ACPI_TO_POINTER(i) -#define ACPI_PTR_TO_PHYSADDR(i) ACPI_TO_INTEGER(i) -#endif - -/* - * Macros for moving data around to/from buffers that are possibly unaligned. - * If the hardware supports the transfer of unaligned data, just do the store. - * Otherwise, we have to move one byte at a time. - */ -#ifdef ACPI_BIG_ENDIAN -/* - * Macros for big-endian machines - */ - -/* This macro sets a buffer index, starting from the end of the buffer */ - -#define ACPI_BUFFER_INDEX(buf_len,buf_offset,byte_gran) ((buf_len) - (((buf_offset)+1) * (byte_gran))) - -/* These macros reverse the bytes during the move, converting little-endian to big endian */ - - /* Big Endian <== Little Endian */ - /* Hi...Lo Lo...Hi */ -/* 16-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_16_TO_16(d,s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[1];\ - (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[0];} - -#define ACPI_MOVE_16_TO_32(d,s) {(*(u32 *)(void *)(d))=0;\ - ((u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\ - ((u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];} - -#define ACPI_MOVE_16_TO_64(d,s) {(*(u64 *)(void *)(d))=0;\ - ((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\ - ((u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];} - -/* 32-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_32_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */ - -#define ACPI_MOVE_32_TO_32(d,s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[3];\ - (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[2];\ - (( u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\ - (( u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];} - -#define ACPI_MOVE_32_TO_64(d,s) {(*(u64 *)(void *)(d))=0;\ - ((u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[3];\ - ((u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[2];\ - ((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\ - ((u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];} - -/* 64-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_64_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */ - -#define ACPI_MOVE_64_TO_32(d,s) ACPI_MOVE_32_TO_32(d,s) /* Truncate to 32 */ - -#define ACPI_MOVE_64_TO_64(d,s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[7];\ - (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[6];\ - (( u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[5];\ - (( u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[4];\ - (( u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[3];\ - (( u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[2];\ - (( u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\ - (( u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];} -#else -/* - * Macros for little-endian machines - */ - -/* This macro sets a buffer index, starting from the beginning of the buffer */ - -#define ACPI_BUFFER_INDEX(buf_len,buf_offset,byte_gran) (buf_offset) - -#ifdef ACPI_MISALIGNED_TRANSFERS - -/* The hardware supports unaligned transfers, just do the little-endian move */ - -#if ACPI_MACHINE_WIDTH == 16 - -/* No 64-bit integers */ -/* 16-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_16_TO_16(d,s) *(u16 *)(void *)(d) = *(u16 *)(void *)(s) -#define ACPI_MOVE_16_TO_32(d,s) *(u32 *)(void *)(d) = *(u16 *)(void *)(s) -#define ACPI_MOVE_16_TO_64(d,s) ACPI_MOVE_16_TO_32(d,s) - -/* 32-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_32_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */ -#define ACPI_MOVE_32_TO_32(d,s) *(u32 *)(void *)(d) = *(u32 *)(void *)(s) -#define ACPI_MOVE_32_TO_64(d,s) ACPI_MOVE_32_TO_32(d,s) - -/* 64-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_64_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */ -#define ACPI_MOVE_64_TO_32(d,s) ACPI_MOVE_32_TO_32(d,s) /* Truncate to 32 */ -#define ACPI_MOVE_64_TO_64(d,s) ACPI_MOVE_32_TO_32(d,s) - -#else -/* 16-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_16_TO_16(d,s) *(u16 *)(void *)(d) = *(u16 *)(void *)(s) -#define ACPI_MOVE_16_TO_32(d,s) *(u32 *)(void *)(d) = *(u16 *)(void *)(s) -#define ACPI_MOVE_16_TO_64(d,s) *(u64 *)(void *)(d) = *(u16 *)(void *)(s) - -/* 32-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_32_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */ -#define ACPI_MOVE_32_TO_32(d,s) *(u32 *)(void *)(d) = *(u32 *)(void *)(s) -#define ACPI_MOVE_32_TO_64(d,s) *(u64 *)(void *)(d) = *(u32 *)(void *)(s) - -/* 64-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_64_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */ -#define ACPI_MOVE_64_TO_32(d,s) ACPI_MOVE_32_TO_32(d,s) /* Truncate to 32 */ -#define ACPI_MOVE_64_TO_64(d,s) *(u64 *)(void *)(d) = *(u64 *)(void *)(s) -#endif - -#else -/* - * The hardware does not support unaligned transfers. We must move the - * data one byte at a time. These macros work whether the source or - * the destination (or both) is/are unaligned. (Little-endian move) - */ - -/* 16-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_16_TO_16(d,s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\ - (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];} - -#define ACPI_MOVE_16_TO_32(d,s) {(*(u32 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d,s);} -#define ACPI_MOVE_16_TO_64(d,s) {(*(u64 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d,s);} - -/* 32-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_32_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */ - -#define ACPI_MOVE_32_TO_32(d,s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\ - (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];\ - (( u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[2];\ - (( u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[3];} - -#define ACPI_MOVE_32_TO_64(d,s) {(*(u64 *)(void *)(d)) = 0; ACPI_MOVE_32_TO_32(d,s);} - -/* 64-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_64_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */ -#define ACPI_MOVE_64_TO_32(d,s) ACPI_MOVE_32_TO_32(d,s) /* Truncate to 32 */ -#define ACPI_MOVE_64_TO_64(d,s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\ - (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];\ - (( u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[2];\ - (( u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[3];\ - (( u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[4];\ - (( u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[5];\ - (( u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[6];\ - (( u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[7];} -#endif -#endif - -/* Macros based on machine integer width */ - -#if ACPI_MACHINE_WIDTH == 16 -#define ACPI_MOVE_SIZE_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) - -#elif ACPI_MACHINE_WIDTH == 32 -#define ACPI_MOVE_SIZE_TO_16(d,s) ACPI_MOVE_32_TO_16(d,s) - -#elif ACPI_MACHINE_WIDTH == 64 -#define ACPI_MOVE_SIZE_TO_16(d,s) ACPI_MOVE_64_TO_16(d,s) - -#else -#error unknown ACPI_MACHINE_WIDTH -#endif - -/* - * Fast power-of-two math macros for non-optimized compilers - */ -#define _ACPI_DIV(value,power_of2) ((u32) ((value) >> (power_of2))) -#define _ACPI_MUL(value,power_of2) ((u32) ((value) << (power_of2))) -#define _ACPI_MOD(value,divisor) ((u32) ((value) & ((divisor) -1))) - -#define ACPI_DIV_2(a) _ACPI_DIV(a,1) -#define ACPI_MUL_2(a) _ACPI_MUL(a,1) -#define ACPI_MOD_2(a) _ACPI_MOD(a,2) - -#define ACPI_DIV_4(a) _ACPI_DIV(a,2) -#define ACPI_MUL_4(a) _ACPI_MUL(a,2) -#define ACPI_MOD_4(a) _ACPI_MOD(a,4) - -#define ACPI_DIV_8(a) _ACPI_DIV(a,3) -#define ACPI_MUL_8(a) _ACPI_MUL(a,3) -#define ACPI_MOD_8(a) _ACPI_MOD(a,8) - -#define ACPI_DIV_16(a) _ACPI_DIV(a,4) -#define ACPI_MUL_16(a) _ACPI_MUL(a,4) -#define ACPI_MOD_16(a) _ACPI_MOD(a,16) - -/* - * Rounding macros (Power of two boundaries only) - */ -#define ACPI_ROUND_DOWN(value,boundary) (((acpi_native_uint)(value)) & (~(((acpi_native_uint) boundary)-1))) -#define ACPI_ROUND_UP(value,boundary) ((((acpi_native_uint)(value)) + (((acpi_native_uint) boundary)-1)) & (~(((acpi_native_uint) boundary)-1))) - -#define ACPI_ROUND_DOWN_TO_32_BITS(a) ACPI_ROUND_DOWN(a,4) -#define ACPI_ROUND_DOWN_TO_64_BITS(a) ACPI_ROUND_DOWN(a,8) -#define ACPI_ROUND_DOWN_TO_NATIVE_WORD(a) ACPI_ROUND_DOWN(a,ALIGNED_ADDRESS_BOUNDARY) - -#define ACPI_ROUND_UP_to_32_bITS(a) ACPI_ROUND_UP(a,4) -#define ACPI_ROUND_UP_to_64_bITS(a) ACPI_ROUND_UP(a,8) -#define ACPI_ROUND_UP_TO_NATIVE_WORD(a) ACPI_ROUND_UP(a,ALIGNED_ADDRESS_BOUNDARY) - -#define ACPI_ROUND_BITS_UP_TO_BYTES(a) ACPI_DIV_8((a) + 7) -#define ACPI_ROUND_BITS_DOWN_TO_BYTES(a) ACPI_DIV_8((a)) - -#define ACPI_ROUND_UP_TO_1K(a) (((a) + 1023) >> 10) - -/* Generic (non-power-of-two) rounding */ - -#define ACPI_ROUND_UP_TO(value,boundary) (((value) + ((boundary)-1)) / (boundary)) - -/* - * Bitmask creation - * Bit positions start at zero. - * MASK_BITS_ABOVE creates a mask starting AT the position and above - * MASK_BITS_BELOW creates a mask starting one bit BELOW the position - */ -#define ACPI_MASK_BITS_ABOVE(position) (~((ACPI_INTEGER_MAX) << ((u32) (position)))) -#define ACPI_MASK_BITS_BELOW(position) ((ACPI_INTEGER_MAX) << ((u32) (position))) - -#define ACPI_IS_OCTAL_DIGIT(d) (((char)(d) >= '0') && ((char)(d) <= '7')) - -/* Bitfields within ACPI registers */ - -#define ACPI_REGISTER_PREPARE_BITS(val, pos, mask) ((val << pos) & mask) -#define ACPI_REGISTER_INSERT_VALUE(reg, pos, mask, val) reg = (reg & (~(mask))) | ACPI_REGISTER_PREPARE_BITS(val, pos, mask) - -/* - * An struct acpi_namespace_node * can appear in some contexts, - * where a pointer to an union acpi_operand_object can also - * appear. This macro is used to distinguish them. - * - * The "Descriptor" field is the first field in both structures. - */ -#define ACPI_GET_DESCRIPTOR_TYPE(d) (((union acpi_descriptor *)(void *)(d))->descriptor_id) -#define ACPI_SET_DESCRIPTOR_TYPE(d,t) (((union acpi_descriptor *)(void *)(d))->descriptor_id = t) - -/* Macro to test the object type */ - -#define ACPI_GET_OBJECT_TYPE(d) (((union acpi_operand_object *)(void *)(d))->common.type) - -/* Macro to check the table flags for SINGLE or MULTIPLE tables are allowed */ - -#define ACPI_IS_SINGLE_TABLE(x) (((x) & 0x01) == ACPI_TABLE_SINGLE ? 1 : 0) - -/* - * Macros for the master AML opcode table - */ -#if defined(ACPI_DISASSEMBLER) || defined (ACPI_DEBUG_OUTPUT) -#define ACPI_OP(name,Pargs,Iargs,obj_type,class,type,flags) {name,(u32)(Pargs),(u32)(Iargs),(u32)(flags),obj_type,class,type} -#else -#define ACPI_OP(name,Pargs,Iargs,obj_type,class,type,flags) {(u32)(Pargs),(u32)(Iargs),(u32)(flags),obj_type,class,type} -#endif - -#ifdef ACPI_DISASSEMBLER -#define ACPI_DISASM_ONLY_MEMBERS(a) a; -#else -#define ACPI_DISASM_ONLY_MEMBERS(a) -#endif - -#define ARG_TYPE_WIDTH 5 -#define ARG_1(x) ((u32)(x)) -#define ARG_2(x) ((u32)(x) << (1 * ARG_TYPE_WIDTH)) -#define ARG_3(x) ((u32)(x) << (2 * ARG_TYPE_WIDTH)) -#define ARG_4(x) ((u32)(x) << (3 * ARG_TYPE_WIDTH)) -#define ARG_5(x) ((u32)(x) << (4 * ARG_TYPE_WIDTH)) -#define ARG_6(x) ((u32)(x) << (5 * ARG_TYPE_WIDTH)) - -#define ARGI_LIST1(a) (ARG_1(a)) -#define ARGI_LIST2(a,b) (ARG_1(b)|ARG_2(a)) -#define ARGI_LIST3(a,b,c) (ARG_1(c)|ARG_2(b)|ARG_3(a)) -#define ARGI_LIST4(a,b,c,d) (ARG_1(d)|ARG_2(c)|ARG_3(b)|ARG_4(a)) -#define ARGI_LIST5(a,b,c,d,e) (ARG_1(e)|ARG_2(d)|ARG_3(c)|ARG_4(b)|ARG_5(a)) -#define ARGI_LIST6(a,b,c,d,e,f) (ARG_1(f)|ARG_2(e)|ARG_3(d)|ARG_4(c)|ARG_5(b)|ARG_6(a)) - -#define ARGP_LIST1(a) (ARG_1(a)) -#define ARGP_LIST2(a,b) (ARG_1(a)|ARG_2(b)) -#define ARGP_LIST3(a,b,c) (ARG_1(a)|ARG_2(b)|ARG_3(c)) -#define ARGP_LIST4(a,b,c,d) (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)) -#define ARGP_LIST5(a,b,c,d,e) (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e)) -#define ARGP_LIST6(a,b,c,d,e,f) (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e)|ARG_6(f)) - -#define GET_CURRENT_ARG_TYPE(list) (list & ((u32) 0x1F)) -#define INCREMENT_ARG_LIST(list) (list >>= ((u32) ARG_TYPE_WIDTH)) - -/* - * Reporting macros that are never compiled out - */ -#define ACPI_PARAM_LIST(pl) pl - -/* - * Error reporting. These versions add callers module and line#. - * - * Since _acpi_module_name gets compiled out when ACPI_DEBUG_OUTPUT - * isn't defined, only use it in debug mode. - */ -#ifdef ACPI_DEBUG_OUTPUT - -#define ACPI_REPORT_INFO(fp) {acpi_ut_report_info(_acpi_module_name,__LINE__,_COMPONENT); \ - acpi_os_printf ACPI_PARAM_LIST(fp);} -#define ACPI_REPORT_ERROR(fp) {acpi_ut_report_error(_acpi_module_name,__LINE__,_COMPONENT); \ - acpi_os_printf ACPI_PARAM_LIST(fp);} -#define ACPI_REPORT_WARNING(fp) {acpi_ut_report_warning(_acpi_module_name,__LINE__,_COMPONENT); \ - acpi_os_printf ACPI_PARAM_LIST(fp);} -#define ACPI_REPORT_NSERROR(s,e) acpi_ns_report_error(_acpi_module_name,__LINE__,_COMPONENT, s, e); - -#define ACPI_REPORT_METHOD_ERROR(s,n,p,e) acpi_ns_report_method_error(_acpi_module_name,__LINE__,_COMPONENT, s, n, p, e); - -#else - -#define ACPI_REPORT_INFO(fp) {acpi_ut_report_info("ACPI",__LINE__,_COMPONENT); \ - acpi_os_printf ACPI_PARAM_LIST(fp);} -#define ACPI_REPORT_ERROR(fp) {acpi_ut_report_error("ACPI",__LINE__,_COMPONENT); \ - acpi_os_printf ACPI_PARAM_LIST(fp);} -#define ACPI_REPORT_WARNING(fp) {acpi_ut_report_warning("ACPI",__LINE__,_COMPONENT); \ - acpi_os_printf ACPI_PARAM_LIST(fp);} -#define ACPI_REPORT_NSERROR(s,e) acpi_ns_report_error("ACPI",__LINE__,_COMPONENT, s, e); - -#define ACPI_REPORT_METHOD_ERROR(s,n,p,e) acpi_ns_report_method_error("ACPI",__LINE__,_COMPONENT, s, n, p, e); - -#endif - -/* Error reporting. These versions pass thru the module and line# */ - -#define _ACPI_REPORT_INFO(a,b,c,fp) {acpi_ut_report_info(a,b,c); \ - acpi_os_printf ACPI_PARAM_LIST(fp);} -#define _ACPI_REPORT_ERROR(a,b,c,fp) {acpi_ut_report_error(a,b,c); \ - acpi_os_printf ACPI_PARAM_LIST(fp);} -#define _ACPI_REPORT_WARNING(a,b,c,fp) {acpi_ut_report_warning(a,b,c); \ - acpi_os_printf ACPI_PARAM_LIST(fp);} - -/* - * Debug macros that are conditionally compiled - */ -#ifdef ACPI_DEBUG_OUTPUT -#define ACPI_MODULE_NAME(name) static char ACPI_UNUSED_VAR *_acpi_module_name = name; - -/* - * Common parameters used for debug output functions: - * line number, function name, module(file) name, component ID - */ -#define ACPI_DEBUG_PARAMETERS __LINE__, ACPI_GET_FUNCTION_NAME, _acpi_module_name, _COMPONENT - -/* - * Function entry tracing - */ - -/* - * If ACPI_GET_FUNCTION_NAME was not defined in the compiler-dependent header, - * define it now. This is the case where there the compiler does not support - * a __FUNCTION__ macro or equivalent. We save the function name on the - * local stack. - */ -#ifndef ACPI_GET_FUNCTION_NAME -#define ACPI_GET_FUNCTION_NAME _acpi_function_name -/* - * The Name parameter should be the procedure name as a quoted string. - * This is declared as a local string ("my_function_name") so that it can - * be also used by the function exit macros below. - * Note: (const char) is used to be compatible with the debug interfaces - * and macros such as __FUNCTION__. - */ -#define ACPI_FUNCTION_NAME(name) const char *_acpi_function_name = name; - -#else -/* Compiler supports __FUNCTION__ (or equivalent) -- Ignore this macro */ - -#define ACPI_FUNCTION_NAME(name) -#endif - -#define ACPI_FUNCTION_TRACE(a) ACPI_FUNCTION_NAME(a) \ - acpi_ut_trace(ACPI_DEBUG_PARAMETERS) -#define ACPI_FUNCTION_TRACE_PTR(a,b) ACPI_FUNCTION_NAME(a) \ - acpi_ut_trace_ptr(ACPI_DEBUG_PARAMETERS,(void *)b) -#define ACPI_FUNCTION_TRACE_U32(a,b) ACPI_FUNCTION_NAME(a) \ - acpi_ut_trace_u32(ACPI_DEBUG_PARAMETERS,(u32)b) -#define ACPI_FUNCTION_TRACE_STR(a,b) ACPI_FUNCTION_NAME(a) \ - acpi_ut_trace_str(ACPI_DEBUG_PARAMETERS,(char *)b) - -#define ACPI_FUNCTION_ENTRY() acpi_ut_track_stack_ptr() - -/* - * Function exit tracing. - * WARNING: These macros include a return statement. This is usually considered - * bad form, but having a separate exit macro is very ugly and difficult to maintain. - * One of the FUNCTION_TRACE macros above must be used in conjunction with these macros - * so that "_acpi_function_name" is defined. - */ -#ifdef ACPI_USE_DO_WHILE_0 -#define ACPI_DO_WHILE0(a) do a while(0) -#else -#define ACPI_DO_WHILE0(a) a -#endif - -#define return_VOID ACPI_DO_WHILE0 ({acpi_ut_exit(ACPI_DEBUG_PARAMETERS);return;}) -#define return_ACPI_STATUS(s) ACPI_DO_WHILE0 ({acpi_ut_status_exit(ACPI_DEBUG_PARAMETERS,(s));return((s));}) -#define return_VALUE(s) ACPI_DO_WHILE0 ({acpi_ut_value_exit(ACPI_DEBUG_PARAMETERS,(acpi_integer)(s));return((s));}) -#define return_PTR(s) ACPI_DO_WHILE0 ({acpi_ut_ptr_exit(ACPI_DEBUG_PARAMETERS,(u8 *)(s));return((s));}) - -/* Conditional execution */ - -#define ACPI_DEBUG_EXEC(a) a -#define ACPI_NORMAL_EXEC(a) - -#define ACPI_DEBUG_DEFINE(a) a; -#define ACPI_DEBUG_ONLY_MEMBERS(a) a; -#define _VERBOSE_STRUCTURES - -/* Stack and buffer dumping */ - -#define ACPI_DUMP_STACK_ENTRY(a) acpi_ex_dump_operand((a),0) -#define ACPI_DUMP_OPERANDS(a,b,c,d,e) acpi_ex_dump_operands(a,b,c,d,e,_acpi_module_name,__LINE__) - -#define ACPI_DUMP_ENTRY(a,b) acpi_ns_dump_entry (a,b) -#define ACPI_DUMP_PATHNAME(a,b,c,d) acpi_ns_dump_pathname(a,b,c,d) -#define ACPI_DUMP_RESOURCE_LIST(a) acpi_rs_dump_resource_list(a) -#define ACPI_DUMP_BUFFER(a,b) acpi_ut_dump_buffer((u8 *)a,b,DB_BYTE_DISPLAY,_COMPONENT) -#define ACPI_BREAK_MSG(a) acpi_os_signal (ACPI_SIGNAL_BREAKPOINT,(a)) - -/* - * Generate INT3 on ACPI_ERROR (Debug only!) - */ -#define ACPI_ERROR_BREAK -#ifdef ACPI_ERROR_BREAK -#define ACPI_BREAK_ON_ERROR(lvl) if ((lvl)&ACPI_ERROR) \ - acpi_os_signal(ACPI_SIGNAL_BREAKPOINT,"Fatal error encountered\n") -#else -#define ACPI_BREAK_ON_ERROR(lvl) -#endif - -/* - * Master debug print macros - * Print iff: - * 1) Debug print for the current component is enabled - * 2) Debug error level or trace level for the print statement is enabled - */ -#define ACPI_DEBUG_PRINT(pl) acpi_ut_debug_print ACPI_PARAM_LIST(pl) -#define ACPI_DEBUG_PRINT_RAW(pl) acpi_ut_debug_print_raw ACPI_PARAM_LIST(pl) - -#else -/* - * This is the non-debug case -- make everything go away, - * leaving no executable debug code! - */ -#define ACPI_MODULE_NAME(name) -#define _acpi_module_name "" - -#define ACPI_DEBUG_EXEC(a) -#define ACPI_NORMAL_EXEC(a) a; - -#define ACPI_DEBUG_DEFINE(a) -#define ACPI_DEBUG_ONLY_MEMBERS(a) -#define ACPI_FUNCTION_NAME(a) -#define ACPI_FUNCTION_TRACE(a) -#define ACPI_FUNCTION_TRACE_PTR(a,b) -#define ACPI_FUNCTION_TRACE_U32(a,b) -#define ACPI_FUNCTION_TRACE_STR(a,b) -#define ACPI_FUNCTION_EXIT -#define ACPI_FUNCTION_STATUS_EXIT(s) -#define ACPI_FUNCTION_VALUE_EXIT(s) -#define ACPI_FUNCTION_ENTRY() -#define ACPI_DUMP_STACK_ENTRY(a) -#define ACPI_DUMP_OPERANDS(a,b,c,d,e) -#define ACPI_DUMP_ENTRY(a,b) -#define ACPI_DUMP_PATHNAME(a,b,c,d) -#define ACPI_DUMP_RESOURCE_LIST(a) -#define ACPI_DUMP_BUFFER(a,b) -#define ACPI_DEBUG_PRINT(pl) -#define ACPI_DEBUG_PRINT_RAW(pl) -#define ACPI_BREAK_MSG(a) - -#define return_VOID return -#define return_ACPI_STATUS(s) return(s) -#define return_VALUE(s) return(s) -#define return_PTR(s) return(s) - -#endif - -/* - * Some code only gets executed when the debugger is built in. - * Note that this is entirely independent of whether the - * DEBUG_PRINT stuff (set by ACPI_DEBUG_OUTPUT) is on, or not. - */ -#ifdef ACPI_DEBUGGER -#define ACPI_DEBUGGER_EXEC(a) a -#else -#define ACPI_DEBUGGER_EXEC(a) -#endif - -/* - * For 16-bit code, we want to shrink some things even though - * we are using ACPI_DEBUG_OUTPUT to get the debug output - */ -#if ACPI_MACHINE_WIDTH == 16 -#undef ACPI_DEBUG_ONLY_MEMBERS -#undef _VERBOSE_STRUCTURES -#define ACPI_DEBUG_ONLY_MEMBERS(a) -#endif - -#ifdef ACPI_DEBUG_OUTPUT -/* - * 1) Set name to blanks - * 2) Copy the object name - */ -#define ACPI_ADD_OBJECT_NAME(a,b) ACPI_MEMSET (a->common.name, ' ', sizeof (a->common.name));\ - ACPI_STRNCPY (a->common.name, acpi_gbl_ns_type_names[b], sizeof (a->common.name)) -#else - -#define ACPI_ADD_OBJECT_NAME(a,b) -#endif - -/* - * Memory allocation tracking (DEBUG ONLY) - */ -#ifndef ACPI_DBG_TRACK_ALLOCATIONS - -/* Memory allocation */ - -#define ACPI_MEM_ALLOCATE(a) acpi_ut_allocate((acpi_size)(a),_COMPONENT,_acpi_module_name,__LINE__) -#define ACPI_MEM_CALLOCATE(a) acpi_ut_callocate((acpi_size)(a), _COMPONENT,_acpi_module_name,__LINE__) -#define ACPI_MEM_FREE(a) acpi_os_free(a) -#define ACPI_MEM_TRACKING(a) - -#else - -/* Memory allocation */ - -#define ACPI_MEM_ALLOCATE(a) acpi_ut_allocate_and_track((acpi_size)(a),_COMPONENT,_acpi_module_name,__LINE__) -#define ACPI_MEM_CALLOCATE(a) acpi_ut_callocate_and_track((acpi_size)(a), _COMPONENT,_acpi_module_name,__LINE__) -#define ACPI_MEM_FREE(a) acpi_ut_free_and_track(a,_COMPONENT,_acpi_module_name,__LINE__) -#define ACPI_MEM_TRACKING(a) a - -#endif /* ACPI_DBG_TRACK_ALLOCATIONS */ - -#endif /* ACMACROS_H */ |