aboutsummaryrefslogtreecommitdiff
path: root/fs/ubifs/lpt.c
diff options
context:
space:
mode:
Diffstat (limited to 'fs/ubifs/lpt.c')
-rw-r--r--fs/ubifs/lpt.c227
1 files changed, 131 insertions, 96 deletions
diff --git a/fs/ubifs/lpt.c b/fs/ubifs/lpt.c
index 9ff2463177e..d46b19ec181 100644
--- a/fs/ubifs/lpt.c
+++ b/fs/ubifs/lpt.c
@@ -36,15 +36,17 @@
* can be written into a single eraseblock. In that case, garbage collection
* consists of just writing the whole table, which therefore makes all other
* eraseblocks reusable. In the case of the big model, dirty eraseblocks are
- * selected for garbage collection, which consists are marking the nodes in
+ * selected for garbage collection, which consists of marking the clean nodes in
* that LEB as dirty, and then only the dirty nodes are written out. Also, in
* the case of the big model, a table of LEB numbers is saved so that the entire
* LPT does not to be scanned looking for empty eraseblocks when UBIFS is first
* mounted.
*/
-#include <linux/crc16.h>
#include "ubifs.h"
+#include <linux/crc16.h>
+#include <linux/math64.h>
+#include <linux/slab.h>
/**
* do_calc_lpt_geom - calculate sizes for the LPT area.
@@ -109,7 +111,8 @@ static void do_calc_lpt_geom(struct ubifs_info *c)
c->lpt_sz = (long long)c->pnode_cnt * c->pnode_sz;
c->lpt_sz += (long long)c->nnode_cnt * c->nnode_sz;
c->lpt_sz += c->ltab_sz;
- c->lpt_sz += c->lsave_sz;
+ if (c->big_lpt)
+ c->lpt_sz += c->lsave_sz;
/* Add wastage */
sz = c->lpt_sz;
@@ -134,15 +137,13 @@ static void do_calc_lpt_geom(struct ubifs_info *c)
int ubifs_calc_lpt_geom(struct ubifs_info *c)
{
int lebs_needed;
- uint64_t sz;
+ long long sz;
do_calc_lpt_geom(c);
/* Verify that lpt_lebs is big enough */
sz = c->lpt_sz * 2; /* Must have at least 2 times the size */
- sz += c->leb_size - 1;
- do_div(sz, c->leb_size);
- lebs_needed = sz;
+ lebs_needed = div_u64(sz + c->leb_size - 1, c->leb_size);
if (lebs_needed > c->lpt_lebs) {
ubifs_err("too few LPT LEBs");
return -EINVAL;
@@ -155,7 +156,6 @@ int ubifs_calc_lpt_geom(struct ubifs_info *c)
}
c->check_lpt_free = c->big_lpt;
-
return 0;
}
@@ -175,7 +175,7 @@ static int calc_dflt_lpt_geom(struct ubifs_info *c, int *main_lebs,
int *big_lpt)
{
int i, lebs_needed;
- uint64_t sz;
+ long long sz;
/* Start by assuming the minimum number of LPT LEBs */
c->lpt_lebs = UBIFS_MIN_LPT_LEBS;
@@ -202,9 +202,7 @@ static int calc_dflt_lpt_geom(struct ubifs_info *c, int *main_lebs,
/* Now check there are enough LPT LEBs */
for (i = 0; i < 64 ; i++) {
sz = c->lpt_sz * 4; /* Allow 4 times the size */
- sz += c->leb_size - 1;
- do_div(sz, c->leb_size);
- lebs_needed = sz;
+ lebs_needed = div_u64(sz + c->leb_size - 1, c->leb_size);
if (lebs_needed > c->lpt_lebs) {
/* Not enough LPT LEBs so try again with more */
c->lpt_lebs = lebs_needed;
@@ -287,25 +285,56 @@ uint32_t ubifs_unpack_bits(uint8_t **addr, int *pos, int nrbits)
const int k = 32 - nrbits;
uint8_t *p = *addr;
int b = *pos;
- uint32_t val;
+ uint32_t uninitialized_var(val);
+ const int bytes = (nrbits + b + 7) >> 3;
ubifs_assert(nrbits > 0);
ubifs_assert(nrbits <= 32);
ubifs_assert(*pos >= 0);
ubifs_assert(*pos < 8);
if (b) {
- val = p[1] | ((uint32_t)p[2] << 8) | ((uint32_t)p[3] << 16) |
- ((uint32_t)p[4] << 24);
+ switch (bytes) {
+ case 2:
+ val = p[1];
+ break;
+ case 3:
+ val = p[1] | ((uint32_t)p[2] << 8);
+ break;
+ case 4:
+ val = p[1] | ((uint32_t)p[2] << 8) |
+ ((uint32_t)p[3] << 16);
+ break;
+ case 5:
+ val = p[1] | ((uint32_t)p[2] << 8) |
+ ((uint32_t)p[3] << 16) |
+ ((uint32_t)p[4] << 24);
+ }
val <<= (8 - b);
val |= *p >> b;
nrbits += b;
- } else
- val = p[0] | ((uint32_t)p[1] << 8) | ((uint32_t)p[2] << 16) |
- ((uint32_t)p[3] << 24);
+ } else {
+ switch (bytes) {
+ case 1:
+ val = p[0];
+ break;
+ case 2:
+ val = p[0] | ((uint32_t)p[1] << 8);
+ break;
+ case 3:
+ val = p[0] | ((uint32_t)p[1] << 8) |
+ ((uint32_t)p[2] << 16);
+ break;
+ case 4:
+ val = p[0] | ((uint32_t)p[1] << 8) |
+ ((uint32_t)p[2] << 16) |
+ ((uint32_t)p[3] << 24);
+ break;
+ }
+ }
val <<= k;
val >>= k;
b = nrbits & 7;
- p += nrbits / 8;
+ p += nrbits >> 3;
*addr = p;
*pos = b;
ubifs_assert((val >> nrbits) == 0 || nrbits - b == 32);
@@ -526,7 +555,7 @@ static int calc_nnode_num(int row, int col)
* This function calculates and returns the nnode number based on the parent's
* nnode number and the index in parent.
*/
-static int calc_nnode_num_from_parent(struct ubifs_info *c,
+static int calc_nnode_num_from_parent(const struct ubifs_info *c,
struct ubifs_nnode *parent, int iip)
{
int num, shft;
@@ -551,7 +580,7 @@ static int calc_nnode_num_from_parent(struct ubifs_info *c,
* This function calculates and returns the pnode number based on the parent's
* nnode number and the index in parent.
*/
-static int calc_pnode_num_from_parent(struct ubifs_info *c,
+static int calc_pnode_num_from_parent(const struct ubifs_info *c,
struct ubifs_nnode *parent, int iip)
{
int i, n = c->lpt_hght - 1, pnum = parent->num, num = 0;
@@ -672,8 +701,7 @@ int ubifs_create_dflt_lpt(struct ubifs_info *c, int *main_lebs, int lpt_first,
alen = ALIGN(len, c->min_io_size);
set_ltab(c, lnum, c->leb_size - alen, alen - len);
memset(p, 0xff, alen - len);
- err = ubi_leb_change(c->ubi, lnum++, buf, alen,
- UBI_SHORTTERM);
+ err = ubifs_leb_change(c, lnum++, buf, alen);
if (err)
goto out;
p = buf;
@@ -703,8 +731,7 @@ int ubifs_create_dflt_lpt(struct ubifs_info *c, int *main_lebs, int lpt_first,
set_ltab(c, lnum, c->leb_size - alen,
alen - len);
memset(p, 0xff, alen - len);
- err = ubi_leb_change(c->ubi, lnum++, buf, alen,
- UBI_SHORTTERM);
+ err = ubifs_leb_change(c, lnum++, buf, alen);
if (err)
goto out;
p = buf;
@@ -751,8 +778,7 @@ int ubifs_create_dflt_lpt(struct ubifs_info *c, int *main_lebs, int lpt_first,
alen = ALIGN(len, c->min_io_size);
set_ltab(c, lnum, c->leb_size - alen, alen - len);
memset(p, 0xff, alen - len);
- err = ubi_leb_change(c->ubi, lnum++, buf, alen,
- UBI_SHORTTERM);
+ err = ubifs_leb_change(c, lnum++, buf, alen);
if (err)
goto out;
p = buf;
@@ -777,7 +803,7 @@ int ubifs_create_dflt_lpt(struct ubifs_info *c, int *main_lebs, int lpt_first,
alen = ALIGN(len, c->min_io_size);
set_ltab(c, lnum, c->leb_size - alen, alen - len);
memset(p, 0xff, alen - len);
- err = ubi_leb_change(c->ubi, lnum++, buf, alen, UBI_SHORTTERM);
+ err = ubifs_leb_change(c, lnum++, buf, alen);
if (err)
goto out;
p = buf;
@@ -797,7 +823,7 @@ int ubifs_create_dflt_lpt(struct ubifs_info *c, int *main_lebs, int lpt_first,
/* Write remaining buffer */
memset(p, 0xff, alen - len);
- err = ubi_leb_change(c->ubi, lnum, buf, alen, UBI_SHORTTERM);
+ err = ubifs_leb_change(c, lnum, buf, alen);
if (err)
goto out;
@@ -897,7 +923,7 @@ static int check_lpt_crc(void *buf, int len)
if (crc != calc_crc) {
ubifs_err("invalid crc in LPT node: crc %hx calc %hx", crc,
calc_crc);
- dbg_dump_stack();
+ dump_stack();
return -EINVAL;
}
return 0;
@@ -920,7 +946,7 @@ static int check_lpt_type(uint8_t **addr, int *pos, int type)
if (node_type != type) {
ubifs_err("invalid type (%d) in LPT node type %d", node_type,
type);
- dbg_dump_stack();
+ dump_stack();
return -EINVAL;
}
return 0;
@@ -934,7 +960,7 @@ static int check_lpt_type(uint8_t **addr, int *pos, int type)
*
* This function returns %0 on success and a negative error code on failure.
*/
-static int unpack_pnode(struct ubifs_info *c, void *buf,
+static int unpack_pnode(const struct ubifs_info *c, void *buf,
struct ubifs_pnode *pnode)
{
uint8_t *addr = buf + UBIFS_LPT_CRC_BYTES;
@@ -964,15 +990,15 @@ static int unpack_pnode(struct ubifs_info *c, void *buf,
}
/**
- * unpack_nnode - unpack a nnode.
+ * ubifs_unpack_nnode - unpack a nnode.
* @c: UBIFS file-system description object
* @buf: buffer containing packed nnode to unpack
* @nnode: nnode structure to fill
*
* This function returns %0 on success and a negative error code on failure.
*/
-static int unpack_nnode(struct ubifs_info *c, void *buf,
- struct ubifs_nnode *nnode)
+int ubifs_unpack_nnode(const struct ubifs_info *c, void *buf,
+ struct ubifs_nnode *nnode)
{
uint8_t *addr = buf + UBIFS_LPT_CRC_BYTES;
int i, pos = 0, err;
@@ -1004,7 +1030,7 @@ static int unpack_nnode(struct ubifs_info *c, void *buf,
*
* This function returns %0 on success and a negative error code on failure.
*/
-static int unpack_ltab(struct ubifs_info *c, void *buf)
+static int unpack_ltab(const struct ubifs_info *c, void *buf)
{
uint8_t *addr = buf + UBIFS_LPT_CRC_BYTES;
int i, pos = 0, err;
@@ -1036,7 +1062,7 @@ static int unpack_ltab(struct ubifs_info *c, void *buf)
*
* This function returns %0 on success and a negative error code on failure.
*/
-static int unpack_lsave(struct ubifs_info *c, void *buf)
+static int unpack_lsave(const struct ubifs_info *c, void *buf)
{
uint8_t *addr = buf + UBIFS_LPT_CRC_BYTES;
int i, pos = 0, err;
@@ -1064,7 +1090,7 @@ static int unpack_lsave(struct ubifs_info *c, void *buf)
*
* This function returns %0 on success and a negative error code on failure.
*/
-static int validate_nnode(struct ubifs_info *c, struct ubifs_nnode *nnode,
+static int validate_nnode(const struct ubifs_info *c, struct ubifs_nnode *nnode,
struct ubifs_nnode *parent, int iip)
{
int i, lvl, max_offs;
@@ -1108,7 +1134,7 @@ static int validate_nnode(struct ubifs_info *c, struct ubifs_nnode *nnode,
*
* This function returns %0 on success and a negative error code on failure.
*/
-static int validate_pnode(struct ubifs_info *c, struct ubifs_pnode *pnode,
+static int validate_pnode(const struct ubifs_info *c, struct ubifs_pnode *pnode,
struct ubifs_nnode *parent, int iip)
{
int i;
@@ -1142,7 +1168,8 @@ static int validate_pnode(struct ubifs_info *c, struct ubifs_pnode *pnode,
* This function calculates the LEB numbers for the LEB properties it contains
* based on the pnode number.
*/
-static void set_pnode_lnum(struct ubifs_info *c, struct ubifs_pnode *pnode)
+static void set_pnode_lnum(const struct ubifs_info *c,
+ struct ubifs_pnode *pnode)
{
int i, lnum;
@@ -1192,10 +1219,10 @@ int ubifs_read_nnode(struct ubifs_info *c, struct ubifs_nnode *parent, int iip)
if (c->big_lpt)
nnode->num = calc_nnode_num_from_parent(c, parent, iip);
} else {
- err = ubi_read(c->ubi, lnum, buf, offs, c->nnode_sz);
+ err = ubifs_leb_read(c, lnum, buf, offs, c->nnode_sz, 1);
if (err)
goto out;
- err = unpack_nnode(c, buf, nnode);
+ err = ubifs_unpack_nnode(c, buf, nnode);
if (err)
goto out;
}
@@ -1217,6 +1244,7 @@ int ubifs_read_nnode(struct ubifs_info *c, struct ubifs_nnode *parent, int iip)
out:
ubifs_err("error %d reading nnode at %d:%d", err, lnum, offs);
+ dump_stack();
kfree(nnode);
return err;
}
@@ -1240,10 +1268,9 @@ static int read_pnode(struct ubifs_info *c, struct ubifs_nnode *parent, int iip)
lnum = branch->lnum;
offs = branch->offs;
pnode = kzalloc(sizeof(struct ubifs_pnode), GFP_NOFS);
- if (!pnode) {
- err = -ENOMEM;
- goto out;
- }
+ if (!pnode)
+ return -ENOMEM;
+
if (lnum == 0) {
/*
* This pnode was not written which just means that the LEB
@@ -1261,7 +1288,7 @@ static int read_pnode(struct ubifs_info *c, struct ubifs_nnode *parent, int iip)
lprops->flags = ubifs_categorize_lprops(c, lprops);
}
} else {
- err = ubi_read(c->ubi, lnum, buf, offs, c->pnode_sz);
+ err = ubifs_leb_read(c, lnum, buf, offs, c->pnode_sz, 1);
if (err)
goto out;
err = unpack_pnode(c, buf, pnode);
@@ -1282,8 +1309,9 @@ static int read_pnode(struct ubifs_info *c, struct ubifs_nnode *parent, int iip)
out:
ubifs_err("error %d reading pnode at %d:%d", err, lnum, offs);
- dbg_dump_pnode(c, pnode, parent, iip);
- dbg_msg("calc num: %d", calc_pnode_num_from_parent(c, parent, iip));
+ ubifs_dump_pnode(c, pnode, parent, iip);
+ dump_stack();
+ ubifs_err("calc num: %d", calc_pnode_num_from_parent(c, parent, iip));
kfree(pnode);
return err;
}
@@ -1302,7 +1330,7 @@ static int read_ltab(struct ubifs_info *c)
buf = vmalloc(c->ltab_sz);
if (!buf)
return -ENOMEM;
- err = ubi_read(c->ubi, c->ltab_lnum, buf, c->ltab_offs, c->ltab_sz);
+ err = ubifs_leb_read(c, c->ltab_lnum, buf, c->ltab_offs, c->ltab_sz, 1);
if (err)
goto out;
err = unpack_ltab(c, buf);
@@ -1325,7 +1353,8 @@ static int read_lsave(struct ubifs_info *c)
buf = vmalloc(c->lsave_sz);
if (!buf)
return -ENOMEM;
- err = ubi_read(c->ubi, c->lsave_lnum, buf, c->lsave_offs, c->lsave_sz);
+ err = ubifs_leb_read(c, c->lsave_lnum, buf, c->lsave_offs,
+ c->lsave_sz, 1);
if (err)
goto out;
err = unpack_lsave(c, buf);
@@ -1333,6 +1362,7 @@ static int read_lsave(struct ubifs_info *c)
goto out;
for (i = 0; i < c->lsave_cnt; i++) {
int lnum = c->lsave[i];
+ struct ubifs_lprops *lprops;
/*
* Due to automatic resizing, the values in the lsave table
@@ -1340,7 +1370,11 @@ static int read_lsave(struct ubifs_info *c)
*/
if (lnum >= c->leb_cnt)
continue;
- ubifs_lpt_lookup(c, lnum);
+ lprops = ubifs_lpt_lookup(c, lnum);
+ if (IS_ERR(lprops)) {
+ err = PTR_ERR(lprops);
+ goto out;
+ }
}
out:
vfree(buf);
@@ -1427,13 +1461,13 @@ struct ubifs_lprops *ubifs_lpt_lookup(struct ubifs_info *c, int lnum)
shft -= UBIFS_LPT_FANOUT_SHIFT;
nnode = ubifs_get_nnode(c, nnode, iip);
if (IS_ERR(nnode))
- return ERR_PTR(PTR_ERR(nnode));
+ return ERR_CAST(nnode);
}
iip = ((i >> shft) & (UBIFS_LPT_FANOUT - 1));
shft -= UBIFS_LPT_FANOUT_SHIFT;
pnode = ubifs_get_pnode(c, nnode, iip);
if (IS_ERR(pnode))
- return ERR_PTR(PTR_ERR(pnode));
+ return ERR_CAST(pnode);
iip = (i & (UBIFS_LPT_FANOUT - 1));
dbg_lp("LEB %d, free %d, dirty %d, flags %d", lnum,
pnode->lprops[iip].free, pnode->lprops[iip].dirty,
@@ -1556,7 +1590,7 @@ struct ubifs_lprops *ubifs_lpt_lookup_dirty(struct ubifs_info *c, int lnum)
nnode = c->nroot;
nnode = dirty_cow_nnode(c, nnode);
if (IS_ERR(nnode))
- return ERR_PTR(PTR_ERR(nnode));
+ return ERR_CAST(nnode);
i = lnum - c->main_first;
shft = c->lpt_hght * UBIFS_LPT_FANOUT_SHIFT;
for (h = 1; h < c->lpt_hght; h++) {
@@ -1564,19 +1598,19 @@ struct ubifs_lprops *ubifs_lpt_lookup_dirty(struct ubifs_info *c, int lnum)
shft -= UBIFS_LPT_FANOUT_SHIFT;
nnode = ubifs_get_nnode(c, nnode, iip);
if (IS_ERR(nnode))
- return ERR_PTR(PTR_ERR(nnode));
+ return ERR_CAST(nnode);
nnode = dirty_cow_nnode(c, nnode);
if (IS_ERR(nnode))
- return ERR_PTR(PTR_ERR(nnode));
+ return ERR_CAST(nnode);
}
iip = ((i >> shft) & (UBIFS_LPT_FANOUT - 1));
shft -= UBIFS_LPT_FANOUT_SHIFT;
pnode = ubifs_get_pnode(c, nnode, iip);
if (IS_ERR(pnode))
- return ERR_PTR(PTR_ERR(pnode));
+ return ERR_CAST(pnode);
pnode = dirty_cow_pnode(c, pnode);
if (IS_ERR(pnode))
- return ERR_PTR(PTR_ERR(pnode));
+ return ERR_CAST(pnode);
iip = (i & (UBIFS_LPT_FANOUT - 1));
dbg_lp("LEB %d, free %d, dirty %d, flags %d", lnum,
pnode->lprops[iip].free, pnode->lprops[iip].dirty,
@@ -1703,16 +1737,23 @@ int ubifs_lpt_init(struct ubifs_info *c, int rd, int wr)
if (rd) {
err = lpt_init_rd(c);
if (err)
- return err;
+ goto out_err;
}
if (wr) {
err = lpt_init_wr(c);
if (err)
- return err;
+ goto out_err;
}
return 0;
+
+out_err:
+ if (wr)
+ ubifs_lpt_free(c, 1);
+ if (rd)
+ ubifs_lpt_free(c, 0);
+ return err;
}
/**
@@ -1780,11 +1821,11 @@ static struct ubifs_nnode *scan_get_nnode(struct ubifs_info *c,
if (c->big_lpt)
nnode->num = calc_nnode_num_from_parent(c, parent, iip);
} else {
- err = ubi_read(c->ubi, branch->lnum, buf, branch->offs,
- c->nnode_sz);
+ err = ubifs_leb_read(c, branch->lnum, buf, branch->offs,
+ c->nnode_sz, 1);
if (err)
return ERR_PTR(err);
- err = unpack_nnode(c, buf, nnode);
+ err = ubifs_unpack_nnode(c, buf, nnode);
if (err)
return ERR_PTR(err);
}
@@ -1849,8 +1890,8 @@ static struct ubifs_pnode *scan_get_pnode(struct ubifs_info *c,
ubifs_assert(branch->lnum >= c->lpt_first &&
branch->lnum <= c->lpt_last);
ubifs_assert(branch->offs >= 0 && branch->offs < c->leb_size);
- err = ubi_read(c->ubi, branch->lnum, buf, branch->offs,
- c->pnode_sz);
+ err = ubifs_leb_read(c, branch->lnum, buf, branch->offs,
+ c->pnode_sz, 1);
if (err)
return ERR_PTR(err);
err = unpack_pnode(c, buf, pnode);
@@ -1949,12 +1990,11 @@ again:
if (path[h].in_tree)
continue;
- nnode = kmalloc(sz, GFP_NOFS);
+ nnode = kmemdup(&path[h].nnode, sz, GFP_NOFS);
if (!nnode) {
err = -ENOMEM;
goto out;
}
- memcpy(nnode, &path[h].nnode, sz);
parent = nnode->parent;
parent->nbranch[nnode->iip].nnode = nnode;
path[h].ptr.nnode = nnode;
@@ -1967,12 +2007,11 @@ again:
const size_t sz = sizeof(struct ubifs_pnode);
struct ubifs_nnode *parent;
- pnode = kmalloc(sz, GFP_NOFS);
+ pnode = kmemdup(&path[h].pnode, sz, GFP_NOFS);
if (!pnode) {
err = -ENOMEM;
goto out;
}
- memcpy(pnode, &path[h].pnode, sz);
parent = pnode->parent;
parent->nbranch[pnode->iip].pnode = pnode;
path[h].ptr.pnode = pnode;
@@ -2045,8 +2084,6 @@ out:
return err;
}
-#ifdef CONFIG_UBIFS_FS_DEBUG
-
/**
* dbg_chk_pnode - check a pnode.
* @c: the UBIFS file-system description object
@@ -2061,8 +2098,8 @@ static int dbg_chk_pnode(struct ubifs_info *c, struct ubifs_pnode *pnode,
int i;
if (pnode->num != col) {
- dbg_err("pnode num %d expected %d parent num %d iip %d",
- pnode->num, col, pnode->parent->num, pnode->iip);
+ ubifs_err("pnode num %d expected %d parent num %d iip %d",
+ pnode->num, col, pnode->parent->num, pnode->iip);
return -EINVAL;
}
for (i = 0; i < UBIFS_LPT_FANOUT; i++) {
@@ -2076,14 +2113,14 @@ static int dbg_chk_pnode(struct ubifs_info *c, struct ubifs_pnode *pnode,
if (lnum >= c->leb_cnt)
continue;
if (lprops->lnum != lnum) {
- dbg_err("bad LEB number %d expected %d",
- lprops->lnum, lnum);
+ ubifs_err("bad LEB number %d expected %d",
+ lprops->lnum, lnum);
return -EINVAL;
}
if (lprops->flags & LPROPS_TAKEN) {
if (cat != LPROPS_UNCAT) {
- dbg_err("LEB %d taken but not uncat %d",
- lprops->lnum, cat);
+ ubifs_err("LEB %d taken but not uncat %d",
+ lprops->lnum, cat);
return -EINVAL;
}
continue;
@@ -2095,8 +2132,8 @@ static int dbg_chk_pnode(struct ubifs_info *c, struct ubifs_pnode *pnode,
case LPROPS_FRDI_IDX:
break;
default:
- dbg_err("LEB %d index but cat %d",
- lprops->lnum, cat);
+ ubifs_err("LEB %d index but cat %d",
+ lprops->lnum, cat);
return -EINVAL;
}
} else {
@@ -2108,8 +2145,8 @@ static int dbg_chk_pnode(struct ubifs_info *c, struct ubifs_pnode *pnode,
case LPROPS_FREEABLE:
break;
default:
- dbg_err("LEB %d not index but cat %d",
- lprops->lnum, cat);
+ ubifs_err("LEB %d not index but cat %d",
+ lprops->lnum, cat);
return -EINVAL;
}
}
@@ -2149,24 +2186,24 @@ static int dbg_chk_pnode(struct ubifs_info *c, struct ubifs_pnode *pnode,
break;
}
if (!found) {
- dbg_err("LEB %d cat %d not found in cat heap/list",
- lprops->lnum, cat);
+ ubifs_err("LEB %d cat %d not found in cat heap/list",
+ lprops->lnum, cat);
return -EINVAL;
}
switch (cat) {
case LPROPS_EMPTY:
if (lprops->free != c->leb_size) {
- dbg_err("LEB %d cat %d free %d dirty %d",
- lprops->lnum, cat, lprops->free,
- lprops->dirty);
+ ubifs_err("LEB %d cat %d free %d dirty %d",
+ lprops->lnum, cat, lprops->free,
+ lprops->dirty);
return -EINVAL;
}
case LPROPS_FREEABLE:
case LPROPS_FRDI_IDX:
if (lprops->free + lprops->dirty != c->leb_size) {
- dbg_err("LEB %d cat %d free %d dirty %d",
- lprops->lnum, cat, lprops->free,
- lprops->dirty);
+ ubifs_err("LEB %d cat %d free %d dirty %d",
+ lprops->lnum, cat, lprops->free,
+ lprops->dirty);
return -EINVAL;
}
}
@@ -2190,7 +2227,7 @@ int dbg_check_lpt_nodes(struct ubifs_info *c, struct ubifs_cnode *cnode,
struct ubifs_cnode *cn;
int num, iip = 0, err;
- if (!(ubifs_chk_flags & UBIFS_CHK_LPROPS))
+ if (!dbg_is_chk_lprops(c))
return 0;
while (cnode) {
@@ -2200,9 +2237,9 @@ int dbg_check_lpt_nodes(struct ubifs_info *c, struct ubifs_cnode *cnode,
/* cnode is a nnode */
num = calc_nnode_num(row, col);
if (cnode->num != num) {
- dbg_err("nnode num %d expected %d "
- "parent num %d iip %d", cnode->num, num,
- (nnode ? nnode->num : 0), cnode->iip);
+ ubifs_err("nnode num %d expected %d parent num %d iip %d",
+ cnode->num, num,
+ (nnode ? nnode->num : 0), cnode->iip);
return -EINVAL;
}
nn = (struct ubifs_nnode *)cnode;
@@ -2239,5 +2276,3 @@ int dbg_check_lpt_nodes(struct ubifs_info *c, struct ubifs_cnode *cnode,
}
return 0;
}
-
-#endif /* CONFIG_UBIFS_FS_DEBUG */
'width: 0.1%;'/> -rw-r--r--arch/powerpc/boot/dts/mpc8548cds.dtsi4
-rw-r--r--arch/powerpc/boot/dts/mpc8555cds.dts2
-rw-r--r--arch/powerpc/boot/dts/mpc8560ads.dts4
-rw-r--r--arch/powerpc/boot/dts/mpc8568mds.dts8
-rw-r--r--arch/powerpc/boot/dts/mpc8569mds.dts6
-rw-r--r--arch/powerpc/boot/dts/mpc8641_hpcn.dts4
-rw-r--r--arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts4
-rw-r--r--arch/powerpc/boot/dts/mpc866ads.dts1
-rw-r--r--arch/powerpc/boot/dts/mpc885ads.dts3
-rw-r--r--arch/powerpc/boot/dts/mvme5100.dts185
-rw-r--r--arch/powerpc/boot/dts/oca4080.dts118
-rw-r--r--arch/powerpc/boot/dts/p1010rdb-pa.dts23
-rw-r--r--arch/powerpc/boot/dts/p1010rdb-pa.dtsi85
-rw-r--r--arch/powerpc/boot/dts/p1010rdb-pa_36b.dts (renamed from arch/powerpc/boot/dts/p1010rdb_36b.dts)47
-rw-r--r--arch/powerpc/boot/dts/p1010rdb-pb.dts35
-rw-r--r--arch/powerpc/boot/dts/p1010rdb-pb_36b.dts58
-rw-r--r--arch/powerpc/boot/dts/p1010rdb.dts66
-rw-r--r--arch/powerpc/boot/dts/p1010rdb.dtsi43
-rw-r--r--arch/powerpc/boot/dts/p1010rdb_32b.dtsi79
-rw-r--r--arch/powerpc/boot/dts/p1010rdb_36b.dtsi79
-rw-r--r--arch/powerpc/boot/dts/p1021mds.dts2
-rw-r--r--arch/powerpc/boot/dts/p1022ds.dtsi3
-rw-r--r--arch/powerpc/boot/dts/p1023rds.dts219
-rw-r--r--arch/powerpc/boot/dts/p1025rdb_32b.dts2
-rw-r--r--arch/powerpc/boot/dts/p1025twr.dts95
-rw-r--r--arch/powerpc/boot/dts/p1025twr.dtsi280
-rw-r--r--arch/powerpc/boot/dts/ppa8548.dts2
-rw-r--r--arch/powerpc/boot/dts/pq2fads.dts3
-rw-r--r--arch/powerpc/boot/dts/prpmc2800.dts5
-rw-r--r--arch/powerpc/boot/dts/sbc8349.dts2
-rw-r--r--arch/powerpc/boot/dts/sbc8548-post.dtsi2
-rw-r--r--arch/powerpc/boot/dts/sbc8641d.dts4
-rw-r--r--arch/powerpc/boot/dts/stx_gp3_8560.dts2
-rw-r--r--arch/powerpc/boot/dts/stxssa8555.dts2
-rw-r--r--arch/powerpc/boot/dts/t1040qds.dts46
-rw-r--r--arch/powerpc/boot/dts/t1042qds.dts46
-rw-r--r--arch/powerpc/boot/dts/t104xqds.dtsi166
-rw-r--r--arch/powerpc/boot/dts/t4240emu.dts281
-rw-r--r--arch/powerpc/boot/dts/t4240qds.dts115
-rw-r--r--arch/powerpc/boot/dts/tqm8540.dts3
-rw-r--r--arch/powerpc/boot/dts/tqm8541.dts3
-rw-r--r--arch/powerpc/boot/dts/tqm8548-bigflash.dts5
-rw-r--r--arch/powerpc/boot/dts/tqm8548.dts5
-rw-r--r--arch/powerpc/boot/dts/tqm8555.dts3
-rw-r--r--arch/powerpc/boot/dts/tqm8560.dts3
-rw-r--r--arch/powerpc/boot/dts/tqm8xx.dts1
-rw-r--r--arch/powerpc/boot/dts/virtex440-ml507.dts2
-rw-r--r--arch/powerpc/boot/dts/xcalibur1501.dts4
-rw-r--r--arch/powerpc/boot/dts/xpedite5301.dts4
-rw-r--r--arch/powerpc/boot/dts/xpedite5330.dts4
-rw-r--r--arch/powerpc/boot/dts/xpedite5370.dts4
-rw-r--r--arch/powerpc/boot/elf_util.c4
-rw-r--r--arch/powerpc/boot/main.c8
-rw-r--r--arch/powerpc/boot/mvme5100.c27
-rw-r--r--arch/powerpc/boot/of.c4
-rw-r--r--arch/powerpc/boot/of.h19
-rw-r--r--arch/powerpc/boot/ofconsole.c6
-rw-r--r--arch/powerpc/boot/oflib.c92
-rw-r--r--arch/powerpc/boot/ops.h2
-rw-r--r--arch/powerpc/boot/ppc_asm.h12
-rw-r--r--arch/powerpc/boot/ps3.c4
-rw-r--r--arch/powerpc/boot/pseries-head.S8
-rw-r--r--arch/powerpc/boot/stdio.c14
-rw-r--r--arch/powerpc/boot/swab.h29
-rw-r--r--arch/powerpc/boot/treeboot-akebono.c163
-rw-r--r--arch/powerpc/boot/util.S18
-rwxr-xr-xarch/powerpc/boot/wrapper32
-rw-r--r--arch/powerpc/boot/zImage.lds.S25
-rw-r--r--arch/powerpc/configs/40x/acadia_defconfig1
-rw-r--r--arch/powerpc/configs/40x/ep405_defconfig2
-rw-r--r--arch/powerpc/configs/40x/kilauea_defconfig1
-rw-r--r--arch/powerpc/configs/40x/makalu_defconfig1
-rw-r--r--arch/powerpc/configs/40x/walnut_defconfig1
-rw-r--r--arch/powerpc/configs/44x/akebono_defconfig148
-rw-r--r--arch/powerpc/configs/44x/apollo_3G_nas_defconfig2701
-rw-r--r--arch/powerpc/configs/44x/arches_defconfig1
-rw-r--r--arch/powerpc/configs/44x/bluestone_defconfig1
-rw-r--r--arch/powerpc/configs/44x/canyonlands_defconfig2
-rw-r--r--arch/powerpc/configs/44x/currituck_defconfig1
-rw-r--r--arch/powerpc/configs/44x/ebony_defconfig1
-rw-r--r--arch/powerpc/configs/44x/eiger_defconfig1
-rw-r--r--arch/powerpc/configs/44x/icon_defconfig1
-rw-r--r--arch/powerpc/configs/44x/iss476-smp_defconfig1
-rw-r--r--arch/powerpc/configs/44x/katmai_defconfig1
-rw-r--r--arch/powerpc/configs/44x/rainier_defconfig1
-rw-r--r--arch/powerpc/configs/44x/redwood_defconfig1
-rw-r--r--arch/powerpc/configs/44x/sam440ep_defconfig1
-rw-r--r--arch/powerpc/configs/44x/sequoia_defconfig1
-rw-r--r--arch/powerpc/configs/44x/taishan_defconfig1
-rw-r--r--arch/powerpc/configs/44x/warp_defconfig1
-rw-r--r--arch/powerpc/configs/52xx/cm5200_defconfig5
-rw-r--r--arch/powerpc/configs/52xx/lite5200b_defconfig3
-rw-r--r--arch/powerpc/configs/52xx/motionpro_defconfig4
-rw-r--r--arch/powerpc/configs/52xx/pcm030_defconfig5
-rw-r--r--arch/powerpc/configs/52xx/tqm5200_defconfig5
-rw-r--r--arch/powerpc/configs/83xx/asp8347_defconfig1
-rw-r--r--arch/powerpc/configs/83xx/mpc8313_rdb_defconfig2
-rw-r--r--arch/powerpc/configs/83xx/mpc8315_rdb_defconfig2
-rw-r--r--arch/powerpc/configs/83xx/mpc832x_rdb_defconfig1
-rw-r--r--arch/powerpc/configs/83xx/mpc834x_itx_defconfig1
-rw-r--r--arch/powerpc/configs/83xx/mpc836x_mds_defconfig1
-rw-r--r--arch/powerpc/configs/83xx/mpc836x_rdk_defconfig1
-rw-r--r--arch/powerpc/configs/83xx/sbc834x_defconfig2
-rw-r--r--arch/powerpc/configs/85xx/ge_imp3a_defconfig1
-rw-r--r--arch/powerpc/configs/85xx/kmp204x_defconfig225
-rw-r--r--arch/powerpc/configs/85xx/ksi8560_defconfig1
-rw-r--r--arch/powerpc/configs/85xx/p1023_defconfig188
-rw-r--r--arch/powerpc/configs/85xx/ppa8548_defconfig1
-rw-r--r--arch/powerpc/configs/85xx/socrates_defconfig2
-rw-r--r--arch/powerpc/configs/85xx/tqm8540_defconfig1
-rw-r--r--arch/powerpc/configs/85xx/tqm8541_defconfig1
-rw-r--r--arch/powerpc/configs/85xx/tqm8548_defconfig1
-rw-r--r--arch/powerpc/configs/85xx/tqm8555_defconfig1
-rw-r--r--arch/powerpc/configs/85xx/tqm8560_defconfig1
-rw-r--r--arch/powerpc/configs/85xx/xes_mpc85xx_defconfig2
-rw-r--r--arch/powerpc/configs/86xx/gef_ppc9a_defconfig1
-rw-r--r--arch/powerpc/configs/86xx/gef_sbc310_defconfig1
-rw-r--r--arch/powerpc/configs/86xx/gef_sbc610_defconfig1
-rw-r--r--arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig1
-rw-r--r--arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig1
-rw-r--r--arch/powerpc/configs/86xx/sbc8641d_defconfig1
-rw-r--r--arch/powerpc/configs/adder875_defconfig1
-rw-r--r--arch/powerpc/configs/amigaone_defconfig1
-rw-r--r--arch/powerpc/configs/c2k_defconfig2
-rw-r--r--arch/powerpc/configs/cell_defconfig1
-rw-r--r--arch/powerpc/configs/celleb_defconfig1
-rw-r--r--arch/powerpc/configs/chroma_defconfig307
-rw-r--r--arch/powerpc/configs/chrp32_defconfig1
-rw-r--r--arch/powerpc/configs/corenet32_smp_defconfig8
-rw-r--r--arch/powerpc/configs/corenet64_smp_defconfig7
-rw-r--r--arch/powerpc/configs/ep88xc_defconfig1
-rw-r--r--arch/powerpc/configs/g5_defconfig1
-rw-r--r--arch/powerpc/configs/linkstation_defconfig2
-rw-r--r--arch/powerpc/configs/maple_defconfig1
-rw-r--r--arch/powerpc/configs/mpc5200_defconfig4
-rw-r--r--arch/powerpc/configs/mpc85xx_defconfig7
-rw-r--r--arch/powerpc/configs/mpc85xx_smp_defconfig7
-rw-r--r--arch/powerpc/configs/mpc866_ads_defconfig1
-rw-r--r--arch/powerpc/configs/mpc86xx_defconfig1
-rw-r--r--arch/powerpc/configs/mpc885_ads_defconfig1
-rw-r--r--arch/powerpc/configs/mvme5100_defconfig144
-rw-r--r--arch/powerpc/configs/pasemi_defconfig7
-rw-r--r--arch/powerpc/configs/pmac32_defconfig1
-rw-r--r--arch/powerpc/configs/ppc40x_defconfig1
-rw-r--r--arch/powerpc/configs/ppc44x_defconfig1
-rw-r--r--arch/powerpc/configs/ppc64_defconfig98
-rw-r--r--arch/powerpc/configs/ppc64e_defconfig82
-rw-r--r--arch/powerpc/configs/ppc6xx_defconfig5
-rw-r--r--arch/powerpc/configs/prpmc2800_defconfig108
-rw-r--r--arch/powerpc/configs/ps3_defconfig1
-rw-r--r--arch/powerpc/configs/pseries_defconfig81
-rw-r--r--arch/powerpc/configs/pseries_le_defconfig304
-rw-r--r--arch/powerpc/configs/storcenter_defconfig2
-rw-r--r--arch/powerpc/configs/tqm8xx_defconfig2
-rw-r--r--arch/powerpc/include/asm/Kbuild5
-rw-r--r--arch/powerpc/include/asm/apm82181-adma.h311
-rw-r--r--arch/powerpc/include/asm/archrandom.h50
-rw-r--r--arch/powerpc/include/asm/atomic.h6
-rw-r--r--arch/powerpc/include/asm/barrier.h24
-rw-r--r--arch/powerpc/include/asm/bitops.h11
-rw-r--r--arch/powerpc/include/asm/cache.h14
-rw-r--r--arch/powerpc/include/asm/checksum.h5
-rw-r--r--arch/powerpc/include/asm/clk_interface.h20
-rw-r--r--arch/powerpc/include/asm/cmpxchg.h1
-rw-r--r--arch/powerpc/include/asm/code-patching.h58
-rw-r--r--arch/powerpc/include/asm/compat.h9
-rw-r--r--arch/powerpc/include/asm/context_tracking.h4
-rw-r--r--arch/powerpc/include/asm/cpm2.h1
-rw-r--r--arch/powerpc/include/asm/cputable.h19
-rw-r--r--arch/powerpc/include/asm/cputhreads.h7
-rw-r--r--arch/powerpc/include/asm/dcr-mmio.h4
-rw-r--r--arch/powerpc/include/asm/debug.h3
-rw-r--r--arch/powerpc/include/asm/disassemble.h38
-rw-r--r--arch/powerpc/include/asm/dma-mapping.h1
-rw-r--r--arch/powerpc/include/asm/eeh.h74
-rw-r--r--arch/powerpc/include/asm/eeh_event.h2
-rw-r--r--arch/powerpc/include/asm/elf.h6
-rw-r--r--arch/powerpc/include/asm/emulated_ops.h2
-rw-r--r--arch/powerpc/include/asm/epapr_hcalls.h111
-rw-r--r--arch/powerpc/include/asm/exception-64e.h21
-rw-r--r--arch/powerpc/include/asm/exception-64s.h54
-rw-r--r--arch/powerpc/include/asm/fadump.h1
-rw-r--r--arch/powerpc/include/asm/fixmap.h44
-rw-r--r--arch/powerpc/include/asm/fsl_ifc.h836
-rw-r--r--arch/powerpc/include/asm/fsl_lbc.h2
-rw-r--r--arch/powerpc/include/asm/ftrace.h2
-rw-r--r--arch/powerpc/include/asm/hardirq.h3
-rw-r--r--arch/powerpc/include/asm/hugetlb.h2
-rw-r--r--arch/powerpc/include/asm/hvcall.h7
-rw-r--r--arch/powerpc/include/asm/hvsi.h16
-rw-r--r--arch/powerpc/include/asm/hw_breakpoint.h2
-rw-r--r--arch/powerpc/include/asm/io.h85
-rw-r--r--arch/powerpc/include/asm/iommu.h55
-rw-r--r--arch/powerpc/include/asm/irqflags.h8
-rw-r--r--arch/powerpc/include/asm/jump_label.h2
-rw-r--r--arch/powerpc/include/asm/kprobes.h5
-rw-r--r--arch/powerpc/include/asm/kvm_asm.h26
-rw-r--r--arch/powerpc/include/asm/kvm_book3s.h263
-rw-r--r--arch/powerpc/include/asm/kvm_book3s_32.h2
-rw-r--r--arch/powerpc/include/asm/kvm_book3s_64.h183
-rw-r--r--arch/powerpc/include/asm/kvm_book3s_asm.h16
-rw-r--r--arch/powerpc/include/asm/kvm_booke.h18
-rw-r--r--arch/powerpc/include/asm/kvm_booke_hv_asm.h17
-rw-r--r--arch/powerpc/include/asm/kvm_host.h125
-rw-r--r--arch/powerpc/include/asm/kvm_para.h80
-rw-r--r--arch/powerpc/include/asm/kvm_ppc.h209
-rw-r--r--arch/powerpc/include/asm/linkage.h2
-rw-r--r--arch/powerpc/include/asm/lppaca.h14
-rw-r--r--arch/powerpc/include/asm/machdep.h31
-rw-r--r--arch/powerpc/include/asm/mce.h198
-rw-r--r--arch/powerpc/include/asm/mmu-book3e.h20
-rw-r--r--arch/powerpc/include/asm/mmu-hash64.h7
-rw-r--r--arch/powerpc/include/asm/mmu.h31
-rw-r--r--arch/powerpc/include/asm/module.h4
-rw-r--r--arch/powerpc/include/asm/mpc5121.h7
-rw-r--r--arch/powerpc/include/asm/opal.h343
-rw-r--r--arch/powerpc/include/asm/paca.h30
-rw-r--r--arch/powerpc/include/asm/page.h4
-rw-r--r--arch/powerpc/include/asm/pci.h5
-rw-r--r--arch/powerpc/include/asm/perf_event_server.h4
-rw-r--r--arch/powerpc/include/asm/pgalloc-32.h6
-rw-r--r--arch/powerpc/include/asm/pgalloc-64.h12
-rw-r--r--arch/powerpc/include/asm/pgtable-ppc64.h42
-rw-r--r--arch/powerpc/include/asm/pgtable.h115
-rw-r--r--arch/powerpc/include/asm/plpar_wrappers.h26
-rw-r--r--arch/powerpc/include/asm/ppc-opcode.h8
-rw-r--r--arch/powerpc/include/asm/ppc-pci.h1
-rw-r--r--arch/powerpc/include/asm/ppc_asm.h239
-rw-r--r--arch/powerpc/include/asm/processor.h111
-rw-r--r--arch/powerpc/include/asm/prom.h75
-rw-r--r--arch/powerpc/include/asm/ps3.h1
-rw-r--r--arch/powerpc/include/asm/pte-book3e.h2
-rw-r--r--arch/powerpc/include/asm/pte-hash64.h8
-rw-r--r--arch/powerpc/include/asm/ptrace.h16
-rw-r--r--arch/powerpc/include/asm/reg.h117
-rw-r--r--arch/powerpc/include/asm/reg_a2.h9
-rw-r--r--arch/powerpc/include/asm/reg_booke.h19
-rw-r--r--arch/powerpc/include/asm/rtas.h128
-rw-r--r--arch/powerpc/include/asm/scom.h23
-rw-r--r--arch/powerpc/include/asm/sections.h25
-rw-r--r--arch/powerpc/include/asm/setup.h5
-rw-r--r--arch/powerpc/include/asm/sfp-machine.h2
-rw-r--r--arch/powerpc/include/asm/smp.h12
-rw-r--r--arch/powerpc/include/asm/spinlock.h12
-rw-r--r--arch/powerpc/include/asm/spu.h3
-rw-r--r--arch/powerpc/include/asm/swab.h43
-rw-r--r--arch/powerpc/include/asm/switch_to.h11
-rw-r--r--arch/powerpc/include/asm/systbl.h11
-rw-r--r--arch/powerpc/include/asm/thread_info.h20
-rw-r--r--arch/powerpc/include/asm/time.h1
-rw-r--r--arch/powerpc/include/asm/timex.h8
-rw-r--r--arch/powerpc/include/asm/tm.h5
-rw-r--r--arch/powerpc/include/asm/topology.h14
-rw-r--r--arch/powerpc/include/asm/unaligned.h7
-rw-r--r--arch/powerpc/include/asm/unistd.h3
-rw-r--r--arch/powerpc/include/asm/uprobes.h11
-rw-r--r--arch/powerpc/include/asm/vdso.h6
-rw-r--r--arch/powerpc/include/asm/vio.h1
-rw-r--r--arch/powerpc/include/asm/word-at-a-time.h78
-rw-r--r--arch/powerpc/include/asm/wsp.h14
-rw-r--r--arch/powerpc/include/asm/xor.h67
-rw-r--r--arch/powerpc/include/uapi/asm/Kbuild1
-rw-r--r--arch/powerpc/include/uapi/asm/byteorder.h4
-rw-r--r--arch/powerpc/include/uapi/asm/cputable.h1
-rw-r--r--arch/powerpc/include/uapi/asm/elf.h10
-rw-r--r--arch/powerpc/include/uapi/asm/kvm.h89
-rw-r--r--arch/powerpc/include/uapi/asm/kvm_para.h6
-rw-r--r--arch/powerpc/include/uapi/asm/setup.h7
-rw-r--r--arch/powerpc/include/uapi/asm/socket.h2
-rw-r--r--arch/powerpc/include/uapi/asm/tm.h2
-rw-r--r--arch/powerpc/include/uapi/asm/unistd.h4
-rw-r--r--arch/powerpc/kernel/Makefile4
-rw-r--r--arch/powerpc/kernel/align.c259
-rw-r--r--arch/powerpc/kernel/asm-offsets.c126
-rw-r--r--arch/powerpc/kernel/cacheinfo.c11
-rw-r--r--arch/powerpc/kernel/clock.c82
-rw-r--r--arch/powerpc/kernel/cpu_setup_a2.S120
-rw-r--r--arch/powerpc/kernel/cpu_setup_fsl_booke.S74
-rw-r--r--arch/powerpc/kernel/cpu_setup_power.S42
-rw-r--r--arch/powerpc/kernel/cputable.c79
-rw-r--r--arch/powerpc/kernel/crash.c3
-rw-r--r--arch/powerpc/kernel/crash_dump.c14
-rw-r--r--arch/powerpc/kernel/dma-iommu.c4
-rw-r--r--arch/powerpc/kernel/dma.c10
-rw-r--r--arch/powerpc/kernel/eeh.c309
-rw-r--r--arch/powerpc/kernel/eeh_driver.c334
-rw-r--r--arch/powerpc/kernel/eeh_event.c30
-rw-r--r--arch/powerpc/kernel/eeh_pe.c111
-rw-r--r--arch/powerpc/kernel/eeh_sysfs.c3
-rw-r--r--arch/powerpc/kernel/entry_64.S190
-rw-r--r--arch/powerpc/kernel/epapr_paravirt.c22
-rw-r--r--arch/powerpc/kernel/exceptions-64e.S594
-rw-r--r--arch/powerpc/kernel/exceptions-64s.S531
-rw-r--r--arch/powerpc/kernel/fadump.c17
-rw-r--r--arch/powerpc/kernel/fpu.S102
-rw-r--r--arch/powerpc/kernel/fsl_booke_entry_mapping.S2
-rw-r--r--arch/powerpc/kernel/ftrace.c175
-rw-r--r--arch/powerpc/kernel/head_40x.S19
-rw-r--r--arch/powerpc/kernel/head_64.S123
-rw-r--r--arch/powerpc/kernel/head_8xx.S3
-rw-r--r--arch/powerpc/kernel/head_fsl_booke.S276
-rw-r--r--arch/powerpc/kernel/hw_breakpoint.c9
-rw-r--r--arch/powerpc/kernel/ibmebus.c14
-rw-r--r--arch/powerpc/kernel/idle_book3e.S2
-rw-r--r--arch/powerpc/kernel/idle_power4.S2
-rw-r--r--arch/powerpc/kernel/idle_power7.S106
-rw-r--r--arch/powerpc/kernel/iomap.c21
-rw-r--r--arch/powerpc/kernel/iommu.c159
-rw-r--r--arch/powerpc/kernel/irq.c49
-rw-r--r--arch/powerpc/kernel/kgdb.c7
-rw-r--r--arch/powerpc/kernel/kprobes.c11
-rw-r--r--arch/powerpc/kernel/kvm.c45
-rw-r--r--arch/powerpc/kernel/legacy_serial.c38
-rw-r--r--arch/powerpc/kernel/machine_kexec.c28
-rw-r--r--arch/powerpc/kernel/machine_kexec_64.c10
-rw-r--r--arch/powerpc/kernel/mce.c352
-rw-r--r--arch/powerpc/kernel/mce_power.c313
-rw-r--r--arch/powerpc/kernel/misc_32.S23
-rw-r--r--arch/powerpc/kernel/misc_64.S57
-rw-r--r--arch/powerpc/kernel/module.c3
-rw-r--r--arch/powerpc/kernel/module_32.c3
-rw-r--r--arch/powerpc/kernel/module_64.c279
-rw-r--r--arch/powerpc/kernel/nvram_64.c12
-rw-r--r--arch/powerpc/kernel/paca.c49
-rw-r--r--arch/powerpc/kernel/pci-common.c143
-rw-r--r--arch/powerpc/kernel/pci-hotplug.c3
-rw-r--r--arch/powerpc/kernel/pci_64.c12
-rw-r--r--arch/powerpc/kernel/pci_of_scan.c20
-rw-r--r--arch/powerpc/kernel/ppc_ksyms.c9
-rw-r--r--arch/powerpc/kernel/process.c406
-rw-r--r--arch/powerpc/kernel/prom.c252
-rw-r--r--arch/powerpc/kernel/prom_init.c261
-rw-r--r--arch/powerpc/kernel/prom_init_check.sh4
-rw-r--r--arch/powerpc/kernel/ptrace.c209
-rw-r--r--arch/powerpc/kernel/ptrace32.c13
-rw-r--r--arch/powerpc/kernel/reloc_64.S5
-rw-r--r--arch/powerpc/kernel/rtas.c39
-rw-r--r--arch/powerpc/kernel/rtas_flash.c8
-rw-r--r--arch/powerpc/kernel/rtas_pci.c72
-rw-r--r--arch/powerpc/kernel/rtasd.c24
-rw-r--r--arch/powerpc/kernel/setup-common.c66
-rw-r--r--arch/powerpc/kernel/setup.h9
-rw-r--r--arch/powerpc/kernel/setup_32.c12
-rw-r--r--arch/powerpc/kernel/setup_64.c113
-rw-r--r--arch/powerpc/kernel/signal.c5
-rw-r--r--arch/powerpc/kernel/signal_32.c140
-rw-r--r--arch/powerpc/kernel/signal_64.c92
-rw-r--r--arch/powerpc/kernel/smp-tbsync.c1
-rw-r--r--arch/powerpc/kernel/smp.c140
-rw-r--r--arch/powerpc/kernel/swsusp_asm64.S4
-rw-r--r--arch/powerpc/kernel/swsusp_booke.S32
-rw-r--r--arch/powerpc/kernel/syscalls.c1
-rw-r--r--arch/powerpc/kernel/sysfs.c451
-rw-r--r--arch/powerpc/kernel/systbl.S18
-rw-r--r--arch/powerpc/kernel/time.c97
-rw-r--r--arch/powerpc/kernel/tm.S189
-rw-r--r--arch/powerpc/kernel/traps.c136
-rw-r--r--arch/powerpc/kernel/udbg.c2
-rw-r--r--arch/powerpc/kernel/udbg_16550.c11
-rw-r--r--arch/powerpc/kernel/uprobes.c2
-rw-r--r--arch/powerpc/kernel/vdso.c11
-rw-r--r--arch/powerpc/kernel/vdso32/getcpu.S2
-rw-r--r--arch/powerpc/kernel/vdso32/gettimeofday.S6
-rw-r--r--arch/powerpc/kernel/vdso32/vdso32.lds.S4
-rw-r--r--arch/powerpc/kernel/vdso32/vdso32_wrapper.S3
-rw-r--r--arch/powerpc/kernel/vdso64/getcpu.S2
-rw-r--r--arch/powerpc/kernel/vdso64/sigtramp.S16
-rw-r--r--arch/powerpc/kernel/vdso64/vdso64.lds.S4
-rw-r--r--arch/powerpc/kernel/vdso64/vdso64_wrapper.S3
-rw-r--r--arch/powerpc/kernel/vecemu.c6
-rw-r--r--arch/powerpc/kernel/vector.S90
-rw-r--r--arch/powerpc/kernel/vio.c113
-rw-r--r--arch/powerpc/kvm/44x.c62
-rw-r--r--arch/powerpc/kvm/44x_emulate.c8
-rw-r--r--arch/powerpc/kvm/44x_tlb.c2
-rw-r--r--arch/powerpc/kvm/Kconfig29
-rw-r--r--arch/powerpc/kvm/Makefile29
-rw-r--r--arch/powerpc/kvm/book3s.c399
-rw-r--r--arch/powerpc/kvm/book3s.h34
-rw-r--r--arch/powerpc/kvm/book3s_32_mmu.c110
-rw-r--r--arch/powerpc/kvm/book3s_32_mmu_host.c25
-rw-r--r--arch/powerpc/kvm/book3s_64_mmu.c212
-rw-r--r--arch/powerpc/kvm/book3s_64_mmu_host.c121
-rw-r--r--arch/powerpc/kvm/book3s_64_mmu_hv.c171
-rw-r--r--arch/powerpc/kvm/book3s_64_slb.S87
-rw-r--r--arch/powerpc/kvm/book3s_64_vio_hv.c29
-rw-r--r--arch/powerpc/kvm/book3s_emulate.c174
-rw-r--r--arch/powerpc/kvm/book3s_exports.c10
-rw-r--r--arch/powerpc/kvm/book3s_hv.c861
-rw-r--r--arch/powerpc/kvm/book3s_hv_builtin.c31
-rw-r--r--arch/powerpc/kvm/book3s_hv_interrupts.S30
-rw-r--r--arch/powerpc/kvm/book3s_hv_ras.c51
-rw-r--r--arch/powerpc/kvm/book3s_hv_rm_mmu.c35
-rw-r--r--arch/powerpc/kvm/book3s_hv_rmhandlers.S2010
-rw-r--r--arch/powerpc/kvm/book3s_interrupts.S68
-rw-r--r--arch/powerpc/kvm/book3s_mmu_hpte.c66
-rw-r--r--arch/powerpc/kvm/book3s_paired_singles.c185
-rw-r--r--arch/powerpc/kvm/book3s_pr.c907
-rw-r--r--arch/powerpc/kvm/book3s_pr_papr.c68
-rw-r--r--arch/powerpc/kvm/book3s_rmhandlers.S81
-rw-r--r--arch/powerpc/kvm/book3s_rtas.c44
-rw-r--r--arch/powerpc/kvm/book3s_segment.S31
-rw-r--r--arch/powerpc/kvm/book3s_xics.c11
-rw-r--r--arch/powerpc/kvm/booke.c382
-rw-r--r--arch/powerpc/kvm/booke.h34
-rw-r--r--arch/powerpc/kvm/bookehv_interrupts.S34
-rw-r--r--arch/powerpc/kvm/e500.c63
-rw-r--r--arch/powerpc/kvm/e500.h10
-rw-r--r--arch/powerpc/kvm/e500_emulate.c49
-rw-r--r--arch/powerpc/kvm/e500_mmu.c6
-rw-r--r--arch/powerpc/kvm/e500_mmu_host.c84
-rw-r--r--arch/powerpc/kvm/e500mc.c62
-rw-r--r--arch/powerpc/kvm/emulate.c37
-rw-r--r--arch/powerpc/kvm/mpic.c6
-rw-r--r--arch/powerpc/kvm/powerpc.c293
-rw-r--r--arch/powerpc/kvm/trace.h429
-rw-r--r--arch/powerpc/kvm/trace_booke.h177
-rw-r--r--arch/powerpc/kvm/trace_pr.h297
-rw-r--r--arch/powerpc/lib/Makefile19
-rw-r--r--arch/powerpc/lib/checksum_64.S58
-rw-r--r--arch/powerpc/lib/code-patching.c15
-rw-r--r--arch/powerpc/lib/copypage_64.S4
-rw-r--r--arch/powerpc/lib/copypage_power7.S12
-rw-r--r--arch/powerpc/lib/copyuser_64.S55
-rw-r--r--arch/powerpc/lib/copyuser_power7.S86
-rw-r--r--arch/powerpc/lib/crtsavres.S186
-rw-r--r--arch/powerpc/lib/hweight_64.S8
-rw-r--r--arch/powerpc/lib/mem_64.S6
-rw-r--r--arch/powerpc/lib/memcpy_64.S28
-rw-r--r--arch/powerpc/lib/memcpy_power7.S81
-rw-r--r--arch/powerpc/lib/sstep.c109
-rw-r--r--arch/powerpc/lib/string_64.S2
-rw-r--r--arch/powerpc/lib/xor_vmx.c177
-rw-r--r--arch/powerpc/math-emu/math_efp.c316
-rw-r--r--arch/powerpc/math-emu/mtfsf.c58
-rw-r--r--arch/powerpc/mm/dma-noncoherent.c4
-rw-r--r--arch/powerpc/mm/fsl_booke_mmu.c80
-rw-r--r--arch/powerpc/mm/gup.c18
-rw-r--r--arch/powerpc/mm/hash_low_64.S59
-rw-r--r--arch/powerpc/mm/hash_native_64.c84
-rw-r--r--arch/powerpc/mm/hash_utils_64.c167
-rw-r--r--arch/powerpc/mm/hugepage-hash64.c6
-rw-r--r--arch/powerpc/mm/hugetlbpage-book3e.c57
-rw-r--r--arch/powerpc/mm/hugetlbpage-hash64.c4
-rw-r--r--arch/powerpc/mm/hugetlbpage.c16
-rw-r--r--arch/powerpc/mm/init_32.c5
-rw-r--r--arch/powerpc/mm/init_64.c55
-rw-r--r--arch/powerpc/mm/mem.c26
-rw-r--r--arch/powerpc/mm/mmu_context_nohash.c12
-rw-r--r--arch/powerpc/mm/mmu_decl.h2
-rw-r--r--arch/powerpc/mm/numa.c133
-rw-r--r--arch/powerpc/mm/pgtable.c22
-rw-r--r--arch/powerpc/mm/pgtable_32.c6
-rw-r--r--arch/powerpc/mm/pgtable_64.c39
-rw-r--r--arch/powerpc/mm/slb.c14
-rw-r--r--arch/powerpc/mm/slb_low.S14
-rw-r--r--arch/powerpc/mm/slice.c4
-rw-r--r--arch/powerpc/mm/subpage-prot.c2
-rw-r--r--arch/powerpc/mm/tlb_hash64.c1
-rw-r--r--arch/powerpc/mm/tlb_low_64e.S227
-rw-r--r--arch/powerpc/mm/tlb_nohash.c134
-rw-r--r--arch/powerpc/mm/tlb_nohash_low.S4
-rw-r--r--arch/powerpc/net/bpf_jit.h11
-rw-r--r--arch/powerpc/net/bpf_jit_64.S11
-rw-r--r--arch/powerpc/net/bpf_jit_comp.c211
-rw-r--r--arch/powerpc/oprofile/op_model_7450.c1
-rw-r--r--arch/powerpc/oprofile/op_model_cell.c4
-rw-r--r--arch/powerpc/oprofile/op_model_fsl_emb.c1
-rw-r--r--arch/powerpc/oprofile/op_model_pa6t.c1
-rw-r--r--arch/powerpc/oprofile/op_model_power4.c1
-rw-r--r--arch/powerpc/oprofile/op_model_rs64.c1
-rw-r--r--arch/powerpc/perf/Makefile2
-rw-r--r--arch/powerpc/perf/core-book3s.c201
-rw-r--r--arch/powerpc/perf/hv-24x7-catalog.h33
-rw-r--r--arch/powerpc/perf/hv-24x7.c523
-rw-r--r--arch/powerpc/perf/hv-24x7.h109
-rw-r--r--arch/powerpc/perf/hv-common.c39
-rw-r--r--arch/powerpc/perf/hv-common.h36
-rw-r--r--arch/powerpc/perf/hv-gpci.c294
-rw-r--r--arch/powerpc/perf/hv-gpci.h73
-rw-r--r--arch/powerpc/perf/power7-events-list.h10
-rw-r--r--arch/powerpc/perf/power8-pmu.c229
-rw-r--r--arch/powerpc/platforms/44x/Kconfig43
-rw-r--r--arch/powerpc/platforms/44x/Makefile3
-rw-r--r--arch/powerpc/platforms/44x/ppc476.c (renamed from arch/powerpc/platforms/44x/currituck.c)120
-rw-r--r--arch/powerpc/platforms/44x/ppc476_modules.lds15
-rw-r--r--arch/powerpc/platforms/512x/Kconfig2
-rw-r--r--arch/powerpc/platforms/512x/Makefile3
-rw-r--r--arch/powerpc/platforms/512x/clock-commonclk.c1221
-rw-r--r--arch/powerpc/platforms/512x/clock.c753
-rw-r--r--arch/powerpc/platforms/512x/mpc512x_shared.c187
-rw-r--r--arch/powerpc/platforms/512x/pdm360ng.c2
-rw-r--r--arch/powerpc/platforms/52xx/Kconfig4
-rw-r--r--arch/powerpc/platforms/52xx/efika.c4
-rw-r--r--arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c2
-rw-r--r--arch/powerpc/platforms/52xx/mpc52xx_pic.c5
-rw-r--r--arch/powerpc/platforms/82xx/mpc8272_ads.c2
-rw-r--r--arch/powerpc/platforms/82xx/pq2fads.c2
-rw-r--r--arch/powerpc/platforms/83xx/Kconfig1
-rw-r--r--arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c2
-rw-r--r--arch/powerpc/platforms/83xx/suspend.c3
-rw-r--r--arch/powerpc/platforms/85xx/Kconfig122
-rw-r--r--arch/powerpc/platforms/85xx/Makefile12
-rw-r--r--arch/powerpc/platforms/85xx/b4_qds.c102
-rw-r--r--arch/powerpc/platforms/85xx/bsc913x_qds.c74
-rw-r--r--arch/powerpc/platforms/85xx/c293pcie.c2
-rw-r--r--arch/powerpc/platforms/85xx/common.c46
-rw-r--r--arch/powerpc/platforms/85xx/corenet_ds.c96
-rw-r--r--arch/powerpc/platforms/85xx/corenet_ds.h19
-rw-r--r--arch/powerpc/platforms/85xx/corenet_generic.c206
-rw-r--r--arch/powerpc/platforms/85xx/ge_imp3a.c1
-rw-r--r--arch/powerpc/platforms/85xx/mpc8536_ds.c1
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx.h8
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_cds.c1
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_ds.c3
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_mds.c33
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_rdb.c41
-rw-r--r--arch/powerpc/platforms/85xx/p1010rdb.c3
-rw-r--r--arch/powerpc/platforms/85xx/p1022_ds.c1
-rw-r--r--arch/powerpc/platforms/85xx/p1022_rdk.c1
-rw-r--r--arch/powerpc/platforms/85xx/p1023_rdb.c (renamed from arch/powerpc/platforms/85xx/p1023_rds.c)36
-rw-r--r--arch/powerpc/platforms/85xx/p2041_rdb.c87
-rw-r--r--arch/powerpc/platforms/85xx/p3041_ds.c89
-rw-r--r--arch/powerpc/platforms/85xx/p4080_ds.c87
-rw-r--r--arch/powerpc/platforms/85xx/p5020_ds.c93
-rw-r--r--arch/powerpc/platforms/85xx/p5040_ds.c84
-rw-r--r--arch/powerpc/platforms/85xx/ppa8548.c1
-rw-r--r--arch/powerpc/platforms/85xx/qemu_e500.c1
-rw-r--r--arch/powerpc/platforms/85xx/sbc8548.c1
-rw-r--r--arch/powerpc/platforms/85xx/sgy_cts1000.c2
-rw-r--r--arch/powerpc/platforms/85xx/smp.c21
-rw-r--r--arch/powerpc/platforms/85xx/socrates_fpga_pic.c2
-rw-r--r--arch/powerpc/platforms/85xx/t4240_qds.c93
-rw-r--r--arch/powerpc/platforms/85xx/twr_p102x.c148
-rw-r--r--arch/powerpc/platforms/85xx/xes_mpc85xx.c3
-rw-r--r--arch/powerpc/platforms/86xx/pic.c1
-rw-r--r--arch/powerpc/platforms/8xx/Kconfig1
-rw-r--r--arch/powerpc/platforms/8xx/ep88xc.c2
-rw-r--r--arch/powerpc/platforms/8xx/mpc86xads_setup.c2
-rw-r--r--arch/powerpc/platforms/8xx/mpc885ads_setup.c2
-rw-r--r--arch/powerpc/platforms/8xx/tqm8xx_setup.c5
-rw-r--r--arch/powerpc/platforms/Kconfig1
-rw-r--r--arch/powerpc/platforms/Kconfig.cputype47
-rw-r--r--arch/powerpc/platforms/Makefile1
-rw-r--r--arch/powerpc/platforms/cell/beat_htab.c4
-rw-r--r--arch/powerpc/platforms/cell/cbe_thermal.c2
-rw-r--r--arch/powerpc/platforms/cell/celleb_scc_pciex.c6
-rw-r--r--arch/powerpc/platforms/cell/celleb_scc_sio.c7
-rw-r--r--arch/powerpc/platforms/cell/interrupt.c2
-rw-r--r--arch/powerpc/platforms/cell/iommu.c14
-rw-r--r--arch/powerpc/platforms/cell/ras.c3
-rw-r--r--arch/powerpc/platforms/cell/smp.c5
-rw-r--r--arch/powerpc/platforms/cell/spider-pic.c7
-rw-r--r--arch/powerpc/platforms/cell/spu_manage.c13
-rw-r--r--arch/powerpc/platforms/cell/spu_syscalls.c9
-rw-r--r--arch/powerpc/platforms/cell/spufs/Makefile3
-rw-r--r--arch/powerpc/platforms/cell/spufs/coredump.c89
-rw-r--r--arch/powerpc/platforms/cell/spufs/sched.c1
-rw-r--r--arch/powerpc/platforms/cell/spufs/spufs.h4
-rw-r--r--arch/powerpc/platforms/cell/spufs/syscalls.c6
-rw-r--r--arch/powerpc/platforms/chrp/nvram.c4
-rw-r--r--arch/powerpc/platforms/chrp/setup.c4
-rw-r--r--arch/powerpc/platforms/chrp/smp.c1
-rw-r--r--arch/powerpc/platforms/embedded6xx/Kconfig24
-rw-r--r--arch/powerpc/platforms/embedded6xx/Makefile2
-rw-r--r--arch/powerpc/platforms/embedded6xx/flipper-pic.c1
-rw-r--r--arch/powerpc/platforms/embedded6xx/hlwd-pic.c4
-rw-r--r--arch/powerpc/platforms/embedded6xx/mvme5100.c221
-rw-r--r--arch/powerpc/platforms/embedded6xx/prpmc2800.c156
-rw-r--r--arch/powerpc/platforms/fsl_uli1575.c12
-rw-r--r--arch/powerpc/platforms/pasemi/dma_lib.c1
-rw-r--r--arch/powerpc/platforms/pasemi/gpio_mdio.c1
-rw-r--r--arch/powerpc/platforms/pasemi/iommu.c5
-rw-r--r--arch/powerpc/platforms/pasemi/powersave.S2
-rw-r--r--arch/powerpc/platforms/powermac/low_i2c.c6
-rw-r--r--arch/powerpc/platforms/powermac/pfunc_base.c1
-rw-r--r--arch/powerpc/platforms/powermac/pfunc_core.c1
-rw-r--r--arch/powerpc/platforms/powermac/pic.c10
-rw-r--r--arch/powerpc/platforms/powernv/Kconfig14
-rw-r--r--arch/powerpc/platforms/powernv/Makefile10
-rw-r--r--arch/powerpc/platforms/powernv/eeh-ioda.c660
-rw-r--r--arch/powerpc/platforms/powernv/eeh-powernv.c33
-rw-r--r--arch/powerpc/platforms/powernv/opal-async.c204
-rw-r--r--arch/powerpc/platforms/powernv/opal-dump.c448
-rw-r--r--arch/powerpc/platforms/powernv/opal-elog.c315
-rw-r--r--arch/powerpc/platforms/powernv/opal-flash.c588
-rw-r--r--arch/powerpc/platforms/powernv/opal-lpc.c164
-rw-r--r--arch/powerpc/platforms/powernv/opal-memory-errors.c146
-rw-r--r--arch/powerpc/platforms/powernv/opal-msglog.c124
-rw-r--r--arch/powerpc/platforms/powernv/opal-nvram.c4
-rw-r--r--arch/powerpc/platforms/powernv/opal-rtc.c18
-rw-r--r--arch/powerpc/platforms/powernv/opal-sensor.c66
-rw-r--r--arch/powerpc/platforms/powernv/opal-sysparam.c304
-rw-r--r--arch/powerpc/platforms/powernv/opal-takeover.S138
-rw-r--r--arch/powerpc/platforms/powernv/opal-wrappers.S40
-rw-r--r--arch/powerpc/platforms/powernv/opal-xscom.c133
-rw-r--r--arch/powerpc/platforms/powernv/opal.c559
-rw-r--r--arch/powerpc/platforms/powernv/pci-ioda.c225
-rw-r--r--arch/powerpc/platforms/powernv/pci-p5ioc2.c6
-rw-r--r--arch/powerpc/platforms/powernv/pci.c467
-rw-r--r--arch/powerpc/platforms/powernv/pci.h30
-rw-r--r--arch/powerpc/platforms/powernv/powernv.h10
-rw-r--r--arch/powerpc/platforms/powernv/rng.c126
-rw-r--r--arch/powerpc/platforms/powernv/setup.c124
-rw-r--r--arch/powerpc/platforms/powernv/smp.c34
-rw-r--r--arch/powerpc/platforms/powernv/subcore-asm.S95
-rw-r--r--arch/powerpc/platforms/powernv/subcore.c392
-rw-r--r--arch/powerpc/platforms/powernv/subcore.h18
-rw-r--r--arch/powerpc/platforms/ps3/Kconfig2
-rw-r--r--arch/powerpc/platforms/ps3/smp.c2
-rw-r--r--arch/powerpc/platforms/ps3/spu.c2
-rw-r--r--arch/powerpc/platforms/pseries/Kconfig25
-rw-r--r--arch/powerpc/platforms/pseries/Makefile3
-rw-r--r--arch/powerpc/platforms/pseries/cmm.c1
-rw-r--r--arch/powerpc/platforms/pseries/dlpar.c46
-rw-r--r--arch/powerpc/platforms/pseries/dtl.c1
-rw-r--r--arch/powerpc/platforms/pseries/eeh_pseries.c70
-rw-r--r--arch/powerpc/platforms/pseries/event_sources.c8
-rw-r--r--arch/powerpc/platforms/pseries/hotplug-cpu.c25
-rw-r--r--arch/powerpc/platforms/pseries/hotplug-memory.c106
-rw-r--r--arch/powerpc/platforms/pseries/hvCall.S10
-rw-r--r--arch/powerpc/platforms/pseries/io_event_irq.c6
-rw-r--r--arch/powerpc/platforms/pseries/iommu.c226
-rw-r--r--arch/powerpc/platforms/pseries/lpar.c22
-rw-r--r--arch/powerpc/platforms/pseries/lparcfg.c12
-rw-r--r--arch/powerpc/platforms/pseries/mobility.c26
-rw-r--r--arch/powerpc/platforms/pseries/msi.c28
-rw-r--r--arch/powerpc/platforms/pseries/nvram.c69
-rw-r--r--arch/powerpc/platforms/pseries/pci.c18
-rw-r--r--arch/powerpc/platforms/pseries/pci_dlpar.c6
-rw-r--r--arch/powerpc/platforms/pseries/processor_idle.c364
-rw-r--r--arch/powerpc/platforms/pseries/pseries.h2
-rw-r--r--arch/powerpc/platforms/pseries/ras.c17
-rw-r--r--arch/powerpc/platforms/pseries/reconfig.c3
-rw-r--r--arch/powerpc/platforms/pseries/rng.c45
-rw-r--r--arch/powerpc/platforms/pseries/setup.c96
-rw-r--r--arch/powerpc/platforms/pseries/smp.c5
-rw-r--r--arch/powerpc/platforms/pseries/suspend.c46
-rw-r--r--arch/powerpc/platforms/wsp/Kconfig30
-rw-r--r--arch/powerpc/platforms/wsp/Makefile10
-rw-r--r--arch/powerpc/platforms/wsp/chroma.c55
-rw-r--r--arch/powerpc/platforms/wsp/h8.c134
-rw-r--r--arch/powerpc/platforms/wsp/ics.c760
-rw-r--r--arch/powerpc/platforms/wsp/ics.h25
-rw-r--r--arch/powerpc/platforms/wsp/msi.c102
-rw-r--r--arch/powerpc/platforms/wsp/msi.h19
-rw-r--r--arch/powerpc/platforms/wsp/opb_pic.c319
-rw-r--r--arch/powerpc/platforms/wsp/psr2.c66
-rw-r--r--arch/powerpc/platforms/wsp/scom_smp.c426
-rw-r--r--arch/powerpc/platforms/wsp/scom_wsp.c77
-rw-r--r--arch/powerpc/platforms/wsp/setup.c36
-rw-r--r--arch/powerpc/platforms/wsp/smp.c88
-rw-r--r--arch/powerpc/platforms/wsp/wsp.c115
-rw-r--r--arch/powerpc/platforms/wsp/wsp.h29
-rw-r--r--arch/powerpc/platforms/wsp/wsp_pci.c1133
-rw-r--r--arch/powerpc/platforms/wsp/wsp_pci.h268
-rw-r--r--arch/powerpc/sysdev/Kconfig10
-rw-r--r--arch/powerpc/sysdev/Makefile2
-rw-r--r--arch/powerpc/sysdev/axonram.c21
-rw-r--r--arch/powerpc/sysdev/cpm2_pic.c1
-rw-r--r--arch/powerpc/sysdev/cpm_common.c1
-rw-r--r--arch/powerpc/sysdev/dart_iommu.c6
-rw-r--r--arch/powerpc/sysdev/dcr.c6
-rw-r--r--arch/powerpc/sysdev/ehv_pic.c11
-rw-r--r--arch/powerpc/sysdev/fsl_gtm.c11
-rw-r--r--arch/powerpc/sysdev/fsl_ifc.c306
-rw-r--r--arch/powerpc/sysdev/fsl_lbc.c31
-rw-r--r--arch/powerpc/sysdev/fsl_pci.c189
-rw-r--r--arch/powerpc/sysdev/fsl_pci.h8
-rw-r--r--arch/powerpc/sysdev/fsl_pmc.c1
-rw-r--r--arch/powerpc/sysdev/fsl_rio.c13
-rw-r--r--arch/powerpc/sysdev/fsl_rmu.c7
-rw-r--r--arch/powerpc/sysdev/fsl_soc.c32
-rw-r--r--arch/powerpc/sysdev/fsl_soc.h3
-rw-r--r--arch/powerpc/sysdev/ge/ge_pic.h1
-rw-r--r--arch/powerpc/sysdev/i8259.c1
-rw-r--r--arch/powerpc/sysdev/indirect_pci.c6
-rw-r--r--arch/powerpc/sysdev/mpc8xx_pic.c1
-rw-r--r--arch/powerpc/sysdev/mpic.c62
-rw-r--r--arch/powerpc/sysdev/mpic_msgr.c6
-rw-r--r--arch/powerpc/sysdev/mpic_msi.c8
-rw-r--r--arch/powerpc/sysdev/mpic_timer.c12
-rw-r--r--arch/powerpc/sysdev/msi_bitmap.c2
-rw-r--r--arch/powerpc/sysdev/mv64x60_dev.c4
-rw-r--r--arch/powerpc/sysdev/mv64x60_udbg.c2
-rw-r--r--arch/powerpc/sysdev/of_rtc.c1
-rw-r--r--arch/powerpc/sysdev/ppc4xx_hsta_msi.c215
-rw-r--r--arch/powerpc/sysdev/ppc4xx_ocm.c3
-rw-r--r--arch/powerpc/sysdev/ppc4xx_pci.c23
-rw-r--r--arch/powerpc/sysdev/ppc4xx_soc.c1
-rw-r--r--arch/powerpc/sysdev/qe_lib/qe_io.c1
-rw-r--r--arch/powerpc/sysdev/qe_lib/ucc.c1
-rw-r--r--arch/powerpc/sysdev/qe_lib/ucc_fast.c1
-rw-r--r--arch/powerpc/sysdev/qe_lib/ucc_slow.c1
-rw-r--r--arch/powerpc/sysdev/scom.c168
-rw-r--r--arch/powerpc/sysdev/udbg_memcons.c1
-rw-r--r--arch/powerpc/sysdev/xics/icp-hv.c1
-rw-r--r--arch/powerpc/sysdev/xics/icp-native.c9
-rw-r--r--arch/powerpc/sysdev/xics/ics-opal.c17
-rw-r--r--arch/powerpc/sysdev/xilinx_intc.c2
-rw-r--r--arch/powerpc/xmon/nonstdio.c2
-rw-r--r--arch/powerpc/xmon/xmon.c60
788 files changed, 35118 insertions, 17919 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 38f3b7e47ec..80b94b0add1 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -85,9 +85,12 @@ config GENERIC_HWEIGHT
config PPC
bool
default y
+ select ARCH_MIGHT_HAVE_PC_PARPORT
+ select ARCH_MIGHT_HAVE_PC_SERIO
select BINFMT_ELF
select OF
select OF_EARLY_FLATTREE
+ select OF_RESERVED_MEM
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_DYNAMIC_FTRACE
select HAVE_FUNCTION_TRACER
@@ -97,7 +100,7 @@ config PPC
select VIRT_TO_BUS if !PPC64
select HAVE_IDE
select HAVE_IOREMAP_PROT
- select HAVE_EFFICIENT_UNALIGNED_ACCESS
+ select HAVE_EFFICIENT_UNALIGNED_ACCESS if !CPU_LITTLE_ENDIAN
select HAVE_KPROBES
select HAVE_ARCH_KGDB
select HAVE_KRETPROBES
@@ -106,7 +109,6 @@ config PPC
select HAVE_MEMBLOCK_NODE_MAP
select HAVE_DMA_ATTRS
select HAVE_DMA_API_DEBUG
- select USE_GENERIC_SMP_HELPERS if SMP
select HAVE_OPROFILE
select HAVE_DEBUG_KMEMLEAK
select GENERIC_ATOMIC64 if PPC32
@@ -129,6 +131,8 @@ config PPC
select GENERIC_CMOS_UPDATE
select GENERIC_TIME_VSYSCALL_OLD
select GENERIC_CLOCKEVENTS
+ select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+ select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
select HAVE_MOD_ARCH_SPECIFIC
@@ -138,11 +142,22 @@ config PPC
select OLD_SIGSUSPEND
select OLD_SIGACTION if PPC32
select HAVE_DEBUG_STACKOVERFLOW
+ select HAVE_IRQ_EXIT_ON_IRQ_STACK
+ select ARCH_USE_CMPXCHG_LOCKREF if PPC64
+ select HAVE_ARCH_AUDITSYSCALL
+ select ARCH_SUPPORTS_ATOMIC_RMW
+
+config GENERIC_CSUM
+ def_bool CPU_LITTLE_ENDIAN
config EARLY_PRINTK
bool
default y
+config PANIC_TIMEOUT
+ int
+ default 180
+
config COMPAT
bool
default y if PPC64
@@ -205,9 +220,6 @@ config DEFAULT_UIMAGE
Used to allow a board to specify it wants a uImage built by default
default n
-config REDBOOT
- bool
-
config ARCH_HIBERNATION_POSSIBLE
bool
default y
@@ -335,6 +347,8 @@ config PPC_TRANSACTIONAL_MEM
bool "Transactional Memory support for POWERPC"
depends on PPC_BOOK3S_64
depends on SMP
+ select ALTIVEC
+ select VSX
default n
---help---
Support user-mode Transactional Memory on POWERPC.
@@ -375,6 +389,12 @@ config ARCH_HAS_WALK_MEMORY
config ARCH_ENABLE_MEMORY_HOTREMOVE
def_bool y
+config PPC64_SUPPORTS_MEMORY_FAILURE
+ bool "Add support for memory hwpoison"
+ depends on PPC_BOOK3S_64
+ default "y" if PPC_POWERNV
+ select ARCH_SUPPORTS_MEMORY_FAILURE
+
config KEXEC
bool "kexec system call"
depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP))
@@ -395,8 +415,7 @@ config KEXEC
config CRASH_DUMP
bool "Build a kdump crash kernel"
depends on PPC64 || 6xx || FSL_BOOKE || (44x && !SMP)
- select RELOCATABLE if PPC64 || 44x
- select DYNAMIC_MEMSTART if FSL_BOOKE
+ select RELOCATABLE if (PPC64 && !COMPILE_TEST) || 44x || FSL_BOOKE
help
Build a kernel suitable for use as a kdump capture kernel.
The same kernel binary can be used as production kernel and dump
@@ -404,7 +423,7 @@ config CRASH_DUMP
config FA_DUMP
bool "Firmware-assisted dump"
- depends on PPC64 && PPC_RTAS && CRASH_DUMP
+ depends on PPC64 && PPC_RTAS && CRASH_DUMP && KEXEC
help
A robust mechanism to get reliable kernel crash dump with
assistance from firmware. This approach does not use kexec,
@@ -417,7 +436,7 @@ config FA_DUMP
config IRQ_ALL_CPUS
bool "Distribute interrupts on all CPUs by default"
- depends on SMP && !MV64360
+ depends on SMP
help
This option gives the kernel permission to distribute IRQs across
multiple CPUs. Saying N here will route all IRQs to the first
@@ -435,6 +454,14 @@ config NODES_SHIFT
default "4"
depends on NEED_MULTIPLE_NODES
+config USE_PERCPU_NUMA_NODE_ID
+ def_bool y
+ depends on NUMA
+
+config HAVE_MEMORYLESS_NODES
+ def_bool y
+ depends on NUMA
+
config ARCH_SELECT_MEMORY_MODEL
def_bool y
depends on PPC64
@@ -520,6 +547,7 @@ config PPC_16K_PAGES
config PPC_64K_PAGES
bool "64k page size" if 44x || PPC_STD_MMU_64 || PPC_BOOK3E_64
+ depends on !PPC_FSL_BOOK3E
select PPC_HAS_HASH_64K if PPC_STD_MMU_64
config PPC_256K_PAGES
@@ -603,6 +631,15 @@ config CMDLINE
some command-line options at build time by entering them here. In
most cases you will need to specify the root device here.
+config CMDLINE_FORCE
+ bool "Always use the default kernel command string"
+ depends on CMDLINE_BOOL
+ help
+ Always use the default kernel command string, even if the boot
+ loader passes other arguments to the kernel.
+ This is useful if you cannot or don't want to change the
+ command-line options your boot loader passes to the kernel.
+
config EXTRA_TARGETS
string "Additional default image types"
help
@@ -721,10 +758,6 @@ config FSL_LBC
controller. Also contains some common code used by
drivers for specific local bus peripherals.
-config FSL_IFC
- bool
- depends on FSL_SOC
-
config FSL_GTM
bool
depends on PPC_83xx || QUICC_ENGINE || CPM2
@@ -786,7 +819,7 @@ config HAS_RAPIDIO
default n
config RAPIDIO
- bool "RapidIO support"
+ tristate "RapidIO support"
depends on HAS_RAPIDIO || PCI
help
If you say Y here, the kernel will include drivers and
@@ -794,7 +827,7 @@ config RAPIDIO
config FSL_RIO
bool "Freescale Embedded SRIO Controller support"
- depends on RAPIDIO && HAS_RAPIDIO
+ depends on RAPIDIO = y && HAS_RAPIDIO
default "n"
---help---
Include support for RapidIO controller on Freescale embedded
@@ -877,7 +910,7 @@ config DYNAMIC_MEMSTART
config RELOCATABLE
bool "Build a relocatable kernel"
- depends on ADVANCED_OPTIONS && FLATMEM && 44x
+ depends on ADVANCED_OPTIONS && FLATMEM && (44x || FSL_BOOKE)
select NONSTATIC_KERNEL
help
This builds a kernel image that is capable of running at the
@@ -985,6 +1018,7 @@ endmenu
if PPC64
config RELOCATABLE
bool "Build a relocatable kernel"
+ depends on !COMPILE_TEST
select NONSTATIC_KERNEL
help
This builds a kernel image that is capable of running anywhere
@@ -1009,6 +1043,9 @@ config PHYSICAL_START
default "0x00000000"
endif
+config ARCH_RANDOM
+ def_bool n
+
source "net/Kconfig"
source "drivers/Kconfig"
@@ -1030,11 +1067,6 @@ config KEYS_COMPAT
source "crypto/Kconfig"
-config PPC_CLOCK
- bool
- default n
- select HAVE_CLK
-
config PPC_LIB_RHEAP
bool
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 21c9f304e96..35d16bd2760 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -235,11 +235,6 @@ config PPC_EARLY_DEBUG_USBGECKO
Select this to enable early debugging for Nintendo GameCube/Wii
consoles via an external USB Gecko adapter.
-config PPC_EARLY_DEBUG_WSP
- bool "Early debugging via WSP's internal UART"
- depends on PPC_WSP
- select PPC_UDBG_16550
-
config PPC_EARLY_DEBUG_PS3GELIC
bool "Early debugging through the PS3 Ethernet port"
depends on PPC_PS3
@@ -308,7 +303,6 @@ config PPC_EARLY_DEBUG_OPAL_VTERMNO
This correspond to which /dev/hvcN you want to use for early
debug.
- On OPAL v1 (takeover) this should always be 0
On OPAL v2, this will be 0 for network console and 1 or 2 for
the machine built-in serial ports.
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 51cfb78d406..5687e299d0a 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -36,17 +36,26 @@ KBUILD_DEFCONFIG := ppc64_defconfig
endif
ifeq ($(CONFIG_PPC64),y)
-OLDARCH := ppc64
-
new_nm := $(shell if $(NM) --help 2>&1 | grep -- '--synthetic' > /dev/null; then echo y; else echo n; fi)
ifeq ($(new_nm),y)
NM := $(NM) --synthetic
endif
+endif
+ifeq ($(CONFIG_PPC64),y)
+ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
+OLDARCH := ppc64le
+else
+OLDARCH := ppc64
+endif
+else
+ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
+OLDARCH := ppcle
else
OLDARCH := ppc
endif
+endif
# It seems there are times we use this Makefile without
# including the config file, but this replicates the old behaviour
@@ -56,11 +65,32 @@ endif
UTS_MACHINE := $(OLDARCH)
+ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
+override CC += -mlittle-endian -mno-strict-align
+override AS += -mlittle-endian
+override LD += -EL
+override CROSS32CC += -mlittle-endian
+override CROSS32AS += -mlittle-endian
+LDEMULATION := lppc
+GNUTARGET := powerpcle
+MULTIPLEWORD := -mno-multiple
+KBUILD_CFLAGS_MODULE += $(call cc-option,-mno-save-toc-indirect)
+else
+ifeq ($(call cc-option-yn,-mbig-endian),y)
+override CC += -mbig-endian
+override AS += -mbig-endian
+endif
+override LD += -EB
+LDEMULATION := ppc
+GNUTARGET := powerpc
+MULTIPLEWORD := -mmultiple
+endif
+
ifeq ($(HAS_BIARCH),y)
override AS += -a$(CONFIG_WORD_SIZE)
-override LD += -m elf$(CONFIG_WORD_SIZE)ppc
+override LD += -m elf$(CONFIG_WORD_SIZE)$(LDEMULATION)
override CC += -m$(CONFIG_WORD_SIZE)
-override AR := GNUTARGET=elf$(CONFIG_WORD_SIZE)-powerpc $(AR)
+override AR := GNUTARGET=elf$(CONFIG_WORD_SIZE)-$(GNUTARGET) $(AR)
endif
LDFLAGS_vmlinux-y := -Bstatic
@@ -83,10 +113,16 @@ else
endif
endif
-CFLAGS-$(CONFIG_PPC64) := -mtraceback=no -mcall-aixdesc
+CFLAGS-$(CONFIG_PPC64) := -mtraceback=no
+ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
+CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv2,-mcall-aixdesc)
+AFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv2)
+else
+CFLAGS-$(CONFIG_PPC64) += -mcall-aixdesc
+endif
CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mcmodel=medium,-mminimal-toc)
CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mno-pointers-to-nested-functions)
-CFLAGS-$(CONFIG_PPC32) := -ffixed-r2 -mmultiple
+CFLAGS-$(CONFIG_PPC32) := -ffixed-r2 $(MULTIPLEWORD)
ifeq ($(CONFIG_PPC_BOOK3S_64),y)
CFLAGS-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=power7,-mtune=power4)
@@ -100,7 +136,12 @@ CFLAGS-$(CONFIG_POWER5_CPU) += $(call cc-option,-mcpu=power5)
CFLAGS-$(CONFIG_POWER6_CPU) += $(call cc-option,-mcpu=power6)
CFLAGS-$(CONFIG_POWER7_CPU) += $(call cc-option,-mcpu=power7)
+# Altivec option not allowed with e500mc64 in GCC.
+ifeq ($(CONFIG_ALTIVEC),y)
+E5500_CPU := -mcpu=powerpc64
+else
E5500_CPU := $(call cc-option,-mcpu=e500mc64,-mcpu=powerpc64)
+endif
CFLAGS-$(CONFIG_E5500_CPU) += $(E5500_CPU)
CFLAGS-$(CONFIG_E6500_CPU) += $(call cc-option,-mcpu=e6500,$(E5500_CPU))
@@ -114,8 +155,10 @@ endif
CFLAGS-$(CONFIG_TUNE_CELL) += $(call cc-option,-mtune=cell)
-KBUILD_CPPFLAGS += -Iarch/$(ARCH)
-KBUILD_AFLAGS += -Iarch/$(ARCH)
+asinstr := $(call as-instr,lis 9$(comma)foo@high,-DHAVE_AS_ATHIGH=1)
+
+KBUILD_CPPFLAGS += -Iarch/$(ARCH) $(asinstr)
+KBUILD_AFLAGS += -Iarch/$(ARCH) $(AFLAGS-y)
KBUILD_CFLAGS += -msoft-float -pipe -Iarch/$(ARCH) $(CFLAGS-y)
CPP = $(CC) -E $(KBUILD_CFLAGS)
@@ -123,6 +166,11 @@ CHECKFLAGS += -m$(CONFIG_WORD_SIZE) -D__powerpc__ -D__powerpc$(CONFIG_WORD_SIZE)
KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
+ifeq ($(CONFIG_476FPE_ERR46),y)
+ KBUILD_LDFLAGS_MODULE += --ppc476-workaround \
+ -T $(srctree)/arch/powerpc/platforms/44x/ppc476_modules.lds
+endif
+
# No AltiVec or VSX instructions when building kernel
KBUILD_CFLAGS += $(call cc-option,-mno-altivec)
KBUILD_CFLAGS += $(call cc-option,-mno-vsx)
diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore
index 554734ff302..d61c0352577 100644
--- a/arch/powerpc/boot/.gitignore
+++ b/arch/powerpc/boot/.gitignore
@@ -16,6 +16,7 @@ mktree
uImage
cuImage.*
dtbImage.*
+*.dtb
treeImage.*
zImage
zImage.initrd
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 15ca2255f43..ccc25eddbcb 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -23,6 +23,13 @@ BOOTCFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
-fno-strict-aliasing -Os -msoft-float -pipe \
-fomit-frame-pointer -fno-builtin -fPIC -nostdinc \
-isystem $(shell $(CROSS32CC) -print-file-name=include)
+ifdef CONFIG_PPC64_BOOT_WRAPPER
+BOOTCFLAGS += -m64
+endif
+ifdef CONFIG_CPU_BIG_ENDIAN
+BOOTCFLAGS += -mbig-endian
+endif
+
BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc
ifdef CONFIG_DEBUG_INFO
@@ -46,6 +53,7 @@ $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405
+$(obj)/treeboot-akebono.o: BOOTCFLAGS += -mcpu=405
$(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
@@ -53,7 +61,7 @@ zlib := inffast.c inflate.c inftrees.c
zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h
zliblinuxheader := zlib.h zconf.h zutil.h
-$(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \
+$(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o): \
$(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
@@ -70,9 +78,9 @@ src-wlib-y := string.S crt0.S crtsavres.S stdio.c main.c \
uartlite.c mpc52xx-psc.c
src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c
src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c
-src-wlib-$(CONFIG_8xx) += mpc8xx.c planetcore.c
+src-wlib-$(CONFIG_8xx) += mpc8xx.c planetcore.c fsl-soc.c
src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c
-src-wlib-$(CONFIG_EMBEDDED6xx) += mv64x60.c mv64x60_i2c.c ugecon.c
+src-wlib-$(CONFIG_EMBEDDED6xx) += mv64x60.c mv64x60_i2c.c ugecon.c fsl-soc.c
src-plat-y := of.c epapr.c
src-plat-$(CONFIG_40x) += fixed-head.S ep405.c cuboot-hotfoot.c \
@@ -85,6 +93,7 @@ src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \
cuboot-taishan.c cuboot-katmai.c \
cuboot-warp.c cuboot-yosemite.c \
treeboot-iss4xx.c treeboot-currituck.c \
+ treeboot-akebono.c \
simpleboot.c fixed-head.S virtex.c
src-plat-$(CONFIG_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c
src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c
@@ -94,10 +103,15 @@ src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c
src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \
cuboot-c2k.c gamecube-head.S \
gamecube.c wii-head.S wii.c holly.c \
- prpmc2800.c
+ fixed-head.S mvme5100.c
src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c
src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c
src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c
+src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S
+src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
+src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
+src-plat-$(CONFIG_PPC_CELLEB) += pseries-head.S
+src-plat-$(CONFIG_PPC_CELL_QPACE) += pseries-head.S
src-wlib := $(sort $(src-wlib-y))
src-plat := $(sort $(src-plat-y))
@@ -136,7 +150,11 @@ $(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc
$(obj)/empty.c:
@touch $@
-$(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds: $(obj)/%: $(srctree)/$(src)/%.S
+$(obj)/zImage.lds: $(obj)/%: $(srctree)/$(src)/%.S
+ $(CROSS32CC) $(cpp_flags) -E -Wp,-MD,$(depfile) -P -Upowerpc \
+ -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
+
+$(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds : $(obj)/%: $(srctree)/$(src)/%.S
@cp $< $@
clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \
@@ -203,7 +221,6 @@ image-$(CONFIG_PPC_CHRP) += zImage.chrp
image-$(CONFIG_PPC_EFIKA) += zImage.chrp
image-$(CONFIG_PPC_PMAC) += zImage.pmac
image-$(CONFIG_PPC_HOLLY) += dtbImage.holly
-image-$(CONFIG_PPC_PRPMC2800) += dtbImage.prpmc2800
image-$(CONFIG_DEFAULT_UIMAGE) += uImage
image-$(CONFIG_EPAPR_BOOT) += zImage.epapr
@@ -235,6 +252,7 @@ image-$(CONFIG_YOSEMITE) += cuImage.yosemite
image-$(CONFIG_ISS4xx) += treeImage.iss4xx \
treeImage.iss4xx-mpic
image-$(CONFIG_CURRITUCK) += treeImage.currituck
+image-$(CONFIG_AKEBONO) += treeImage.akebono
# Board ports in arch/powerpc/platform/8xx/Kconfig
image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads
@@ -285,6 +303,7 @@ image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2
image-$(CONFIG_PPC_C2K) += cuImage.c2k
image-$(CONFIG_GAMECUBE) += dtbImage.gamecube
image-$(CONFIG_WII) += dtbImage.wii
+image-$(CONFIG_MVME5100) += dtbImage.mvme5100
# Board port in arch/powerpc/platform/amigaone/Kconfig
image-$(CONFIG_AMIGAONE) += cuImage.amigaone
@@ -314,8 +333,8 @@ $(addprefix $(obj)/, $(initrd-y)): $(obj)/ramdisk.image.gz
$(obj)/zImage.initrd.%: vmlinux $(wrapperbits)
$(call if_changed,wrap,$*,,,$(obj)/ramdisk.image.gz)
-$(obj)/zImage.%: vmlinux $(wrapperbits)
- $(call if_changed,wrap,$*)
+$(addprefix $(obj)/, $(sort $(filter zImage.%, $(image-y)))): vmlinux $(wrapperbits)
+ $(call if_changed,wrap,$(subst $(obj)/zImage.,,$@))
# dtbImage% - a dtbImage is a zImage with an embedded device tree blob
$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/%.dtb
diff --git a/arch/powerpc/boot/addnote.c b/arch/powerpc/boot/addnote.c
index 349b5530d2c..9d9f6f334d3 100644
--- a/arch/powerpc/boot/addnote.c
+++ b/arch/powerpc/boot/addnote.c
@@ -6,6 +6,8 @@
*
* Copyright 2000 Paul Mackerras.
*
+ * Adapted for 64 bit little endian images by Andrew Tauferner.
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
@@ -55,36 +57,61 @@ unsigned int rpanote[N_RPA_DESCR] = {
#define ROUNDUP(len) (((len) + 3) & ~3)
-unsigned char buf[512];
+unsigned char buf[1024];
+#define ELFDATA2LSB 1
+#define ELFDATA2MSB 2
+static int e_data = ELFDATA2MSB;
+#define ELFCLASS32 1
+#define ELFCLASS64 2
+static int e_class = ELFCLASS32;
#define GET_16BE(off) ((buf[off] << 8) + (buf[(off)+1]))
-#define GET_32BE(off) ((GET_16BE(off) << 16) + GET_16BE((off)+2))
-
-#define PUT_16BE(off, v) (buf[off] = ((v) >> 8) & 0xff, \
- buf[(off) + 1] = (v) & 0xff)
-#define PUT_32BE(off, v) (PUT_16BE((off), (v) >> 16), \
- PUT_16BE((off) + 2, (v)))
+#define GET_32BE(off) ((GET_16BE(off) << 16U) + GET_16BE((off)+2U))
+#define GET_64BE(off) ((((unsigned long long)GET_32BE(off)) << 32ULL) + \
+ ((unsigned long long)GET_32BE((off)+4ULL)))
+#define PUT_16BE(off, v)(buf[off] = ((v) >> 8) & 0xff, \
+ buf[(off) + 1] = (v) & 0xff)
+#define PUT_32BE(off, v)(PUT_16BE((off), (v) >> 16L), PUT_16BE((off) + 2, (v)))
+#define PUT_64BE(off, v)((PUT_32BE((off), (v) >> 32L), \
+ PUT_32BE((off) + 4, (v))))
+
+#define GET_16LE(off) ((buf[off]) + (buf[(off)+1] << 8))
+#define GET_32LE(off) (GET_16LE(off) + (GET_16LE((off)+2U) << 16U))
+#define GET_64LE(off) ((unsigned long long)GET_32LE(off) + \
+ (((unsigned long long)GET_32LE((off)+4ULL)) << 32ULL))
+#define PUT_16LE(off, v) (buf[off] = (v) & 0xff, \
+ buf[(off) + 1] = ((v) >> 8) & 0xff)
+#define PUT_32LE(off, v) (PUT_16LE((off), (v)), PUT_16LE((off) + 2, (v) >> 16L))
+#define PUT_64LE(off, v) (PUT_32LE((off), (v)), PUT_32LE((off) + 4, (v) >> 32L))
+
+#define GET_16(off) (e_data == ELFDATA2MSB ? GET_16BE(off) : GET_16LE(off))
+#define GET_32(off) (e_data == ELFDATA2MSB ? GET_32BE(off) : GET_32LE(off))
+#define GET_64(off) (e_data == ELFDATA2MSB ? GET_64BE(off) : GET_64LE(off))
+#define PUT_16(off, v) (e_data == ELFDATA2MSB ? PUT_16BE(off, v) : \
+ PUT_16LE(off, v))
+#define PUT_32(off, v) (e_data == ELFDATA2MSB ? PUT_32BE(off, v) : \
+ PUT_32LE(off, v))
+#define PUT_64(off, v) (e_data == ELFDATA2MSB ? PUT_64BE(off, v) : \
+ PUT_64LE(off, v))
/* Structure of an ELF file */
#define E_IDENT 0 /* ELF header */
-#define E_PHOFF 28
-#define E_PHENTSIZE 42
-#define E_PHNUM 44
-#define E_HSIZE 52 /* size of ELF header */
+#define E_PHOFF (e_class == ELFCLASS32 ? 28 : 32)
+#define E_PHENTSIZE (e_class == ELFCLASS32 ? 42 : 54)
+#define E_PHNUM (e_class == ELFCLASS32 ? 44 : 56)
+#define E_HSIZE (e_class == ELFCLASS32 ? 52 : 64)
#define EI_MAGIC 0 /* offsets in E_IDENT area */
#define EI_CLASS 4
#define EI_DATA 5
#define PH_TYPE 0 /* ELF program header */
-#define PH_OFFSET 4
-#define PH_FILESZ 16
-#define PH_HSIZE 32 /* size of program header */
+#define PH_OFFSET (e_class == ELFCLASS32 ? 4 : 8)
+#define PH_FILESZ (e_class == ELFCLASS32 ? 16 : 32)
+#define PH_HSIZE (e_class == ELFCLASS32 ? 32 : 56)
#define PT_NOTE 4 /* Program header type = note */
-#define ELFCLASS32 1
-#define ELFDATA2MSB 2
unsigned char elf_magic[4] = { 0x7f, 'E', 'L', 'F' };
@@ -92,8 +119,8 @@ int
main(int ac, char **av)
{
int fd, n, i;
- int ph, ps, np;
- int nnote, nnote2, ns;
+ unsigned long ph, ps, np;
+ long nnote, nnote2, ns;
if (ac != 2) {
fprintf(stderr, "Usage: %s elf-file\n", av[0]);
@@ -114,26 +141,27 @@ main(int ac, char **av)
exit(1);
}
- if (n < E_HSIZE || memcmp(&buf[E_IDENT+EI_MAGIC], elf_magic, 4) != 0)
+ if (memcmp(&buf[E_IDENT+EI_MAGIC], elf_magic, 4) != 0)
+ goto notelf;
+ e_class = buf[E_IDENT+EI_CLASS];
+ if (e_class != ELFCLASS32 && e_class != ELFCLASS64)
+ goto notelf;
+ e_data = buf[E_IDENT+EI_DATA];
+ if (e_data != ELFDATA2MSB && e_data != ELFDATA2LSB)
+ goto notelf;
+ if (n < E_HSIZE)
goto notelf;
- if (buf[E_IDENT+EI_CLASS] != ELFCLASS32
- || buf[E_IDENT+EI_DATA] != ELFDATA2MSB) {
- fprintf(stderr, "%s is not a big-endian 32-bit ELF image\n",
- av[1]);
- exit(1);
- }
-
- ph = GET_32BE(E_PHOFF);
- ps = GET_16BE(E_PHENTSIZE);
- np = GET_16BE(E_PHNUM);
+ ph = (e_class == ELFCLASS32 ? GET_32(E_PHOFF) : GET_64(E_PHOFF));
+ ps = GET_16(E_PHENTSIZE);
+ np = GET_16(E_PHNUM);
if (ph < E_HSIZE || ps < PH_HSIZE || np < 1)
goto notelf;
if (ph + (np + 2) * ps + nnote + nnote2 > n)
goto nospace;
for (i = 0; i < np; ++i) {
- if (GET_32BE(ph + PH_TYPE) == PT_NOTE) {
+ if (GET_32(ph + PH_TYPE) == PT_NOTE) {
fprintf(stderr, "%s already has a note entry\n",
av[1]);
exit(0);
@@ -148,15 +176,22 @@ main(int ac, char **av)
/* fill in the program header entry */
ns = ph + 2 * ps;
- PUT_32BE(ph + PH_TYPE, PT_NOTE);
- PUT_32BE(ph + PH_OFFSET, ns);
- PUT_32BE(ph + PH_FILESZ, nnote);
+ PUT_32(ph + PH_TYPE, PT_NOTE);
+ if (e_class == ELFCLASS32)
+ PUT_32(ph + PH_OFFSET, ns);
+ else
+ PUT_64(ph + PH_OFFSET, ns);
+
+ if (e_class == ELFCLASS32)
+ PUT_32(ph + PH_FILESZ, nnote);
+ else
+ PUT_64(ph + PH_FILESZ, nnote);
/* fill in the note area we point to */
/* XXX we should probably make this a proper section */
- PUT_32BE(ns, strlen(arch) + 1);
- PUT_32BE(ns + 4, N_DESCR * 4);
- PUT_32BE(ns + 8, 0x1275);
+ PUT_32(ns, strlen(arch) + 1);
+ PUT_32(ns + 4, N_DESCR * 4);
+ PUT_32(ns + 8, 0x1275);
strcpy((char *) &buf[ns + 12], arch);
ns += 12 + strlen(arch) + 1;
for (i = 0; i < N_DESCR; ++i, ns += 4)
@@ -164,21 +199,28 @@ main(int ac, char **av)
/* fill in the second program header entry and the RPA note area */
ph += ps;
- PUT_32BE(ph + PH_TYPE, PT_NOTE);
- PUT_32BE(ph + PH_OFFSET, ns);
- PUT_32BE(ph + PH_FILESZ, nnote2);
+ PUT_32(ph + PH_TYPE, PT_NOTE);
+ if (e_class == ELFCLASS32)
+ PUT_32(ph + PH_OFFSET, ns);
+ else
+ PUT_64(ph + PH_OFFSET, ns);
+
+ if (e_class == ELFCLASS32)
+ PUT_32(ph + PH_FILESZ, nnote);
+ else
+ PUT_64(ph + PH_FILESZ, nnote2);
/* fill in the note area we point to */
- PUT_32BE(ns, strlen(rpaname) + 1);
- PUT_32BE(ns + 4, sizeof(rpanote));
- PUT_32BE(ns + 8, 0x12759999);
+ PUT_32(ns, strlen(rpaname) + 1);
+ PUT_32(ns + 4, sizeof(rpanote));
+ PUT_32(ns + 8, 0x12759999);
strcpy((char *) &buf[ns + 12], rpaname);
ns += 12 + ROUNDUP(strlen(rpaname) + 1);
for (i = 0; i < N_RPA_DESCR; ++i, ns += 4)
PUT_32BE(ns, rpanote[i]);
/* Update the number of program headers */
- PUT_16BE(E_PHNUM, np + 2);
+ PUT_16(E_PHNUM, np + 2);
/* write back */
lseek(fd, (long) 0, SEEK_SET);
diff --git a/arch/powerpc/boot/crt0.S b/arch/powerpc/boot/crt0.S
index 0f7428a37ef..14de4f8778a 100644
--- a/arch/powerpc/boot/crt0.S
+++ b/arch/powerpc/boot/crt0.S
@@ -1,17 +1,20 @@
/*
* Copyright (C) Paul Mackerras 1997.
*
+ * Adapted for 64 bit LE PowerPC by Andrew Tauferner
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
- * NOTE: this code runs in 32 bit mode, is position-independent,
- * and is packaged as ELF32.
*/
#include "ppc_asm.h"
+RELA = 7
+RELACOUNT = 0x6ffffff9
+
.text
/* A procedure descriptor used when booting this as a COFF file.
* When making COFF, this comes first in the link and we're
@@ -21,6 +24,20 @@
_zimage_start_opd:
.long 0x500000, 0, 0, 0
+#ifdef __powerpc64__
+.balign 8
+p_start: .llong _start
+p_etext: .llong _etext
+p_bss_start: .llong __bss_start
+p_end: .llong _end
+
+p_toc: .llong __toc_start + 0x8000 - p_base
+p_dyn: .llong __dynamic_start - p_base
+p_rela: .llong __rela_dyn_start - p_base
+p_prom: .llong 0
+ .weak _platform_stack_top
+p_pstack: .llong _platform_stack_top
+#else
p_start: .long _start
p_etext: .long _etext
p_bss_start: .long __bss_start
@@ -28,6 +45,7 @@ p_end: .long _end
.weak _platform_stack_top
p_pstack: .long _platform_stack_top
+#endif
.weak _zimage_start
.globl _zimage_start
@@ -38,6 +56,7 @@ _zimage_start_lib:
and the address where we're running. */
bl .+4
p_base: mflr r10 /* r10 now points to runtime addr of p_base */
+#ifndef __powerpc64__
/* grab the link address of the dynamic section in r11 */
addis r11,r10,(_GLOBAL_OFFSET_TABLE_-p_base)@ha
lwz r11,(_GLOBAL_OFFSET_TABLE_-p_base)@l(r11)
@@ -51,8 +70,6 @@ p_base: mflr r10 /* r10 now points to runtime addr of p_base */
/* The dynamic section contains a series of tagged entries.
* We need the RELA and RELACOUNT entries. */
-RELA = 7
-RELACOUNT = 0x6ffffff9
li r9,0
li r0,0
9: lwz r8,0(r12) /* get tag */
@@ -120,9 +137,164 @@ RELACOUNT = 0x6ffffff9
li r0,0
stwu r0,-16(r1) /* establish a stack frame */
6:
+#else /* __powerpc64__ */
+ /* Save the prom pointer at p_prom. */
+ std r5,(p_prom-p_base)(r10)
+
+ /* Set r2 to the TOC. */
+ ld r2,(p_toc-p_base)(r10)
+ add r2,r2,r10
+
+ /* Grab the link address of the dynamic section in r11. */
+ ld r11,-32768(r2)
+ cmpwi r11,0
+ beq 3f /* if not linked -pie then no dynamic section */
+
+ ld r11,(p_dyn-p_base)(r10)
+ add r11,r11,r10
+ ld r9,(p_rela-p_base)(r10)
+ add r9,r9,r10
+ li r7,0
+ li r8,0
+9: ld r6,0(r11) /* get tag */
+ cmpdi r6,0
+ beq 12f /* end of list */
+ cmpdi r6,RELA
+ bne 10f
+ ld r7,8(r11) /* get RELA pointer in r7 */
+ b 11f
+10: addis r6,r6,(-RELACOUNT)@ha
+ cmpdi r6,RELACOUNT@l
+ bne 11f
+ ld r8,8(r11) /* get RELACOUNT value in r8 */
+11: addi r11,r11,16
+ b 9b
+12:
+ cmpdi r7,0 /* check we have both RELA and RELACOUNT */
+ cmpdi cr1,r8,0
+ beq 3f
+ beq cr1,3f
+
+ /* Calcuate the runtime offset. */
+ subf r7,r7,r9
+
+ /* Run through the list of relocations and process the
+ * R_PPC64_RELATIVE ones. */
+ mtctr r8
+13: ld r0,8(r9) /* ELF64_R_TYPE(reloc->r_info) */
+ cmpdi r0,22 /* R_PPC64_RELATIVE */
+ bne 3f
+ ld r6,0(r9) /* reloc->r_offset */
+ ld r0,16(r9) /* reloc->r_addend */
+ add r0,r0,r7
+ stdx r0,r7,r6
+ addi r9,r9,24
+ bdnz 13b
+
+ /* Do a cache flush for our text, in case the loader didn't */
+3: ld r9,p_start-p_base(r10) /* note: these are relocated now */
+ ld r8,p_etext-p_base(r10)
+4: dcbf r0,r9
+ icbi r0,r9
+ addi r9,r9,0x20
+ cmpld cr0,r9,r8
+ blt 4b
+ sync
+ isync
+
+ /* Clear the BSS */
+ ld r9,p_bss_start-p_base(r10)
+ ld r8,p_end-p_base(r10)
+ li r0,0
+5: std r0,0(r9)
+ addi r9,r9,8
+ cmpld cr0,r9,r8
+ blt 5b
+
+ /* Possibly set up a custom stack */
+ ld r8,p_pstack-p_base(r10)
+ cmpdi r8,0
+ beq 6f
+ ld r1,0(r8)
+ li r0,0
+ stdu r0,-16(r1) /* establish a stack frame */
+6:
+#endif /* __powerpc64__ */
/* Call platform_init() */
bl platform_init
/* Call start */
b start
+
+#ifdef __powerpc64__
+
+#define PROM_FRAME_SIZE 512
+#define SAVE_GPR(n, base) std n,8*(n)(base)
+#define REST_GPR(n, base) ld n,8*(n)(base)
+#define SAVE_2GPRS(n, base) SAVE_GPR(n, base); SAVE_GPR(n+1, base)
+#define SAVE_4GPRS(n, base) SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base)
+#define SAVE_8GPRS(n, base) SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base)
+#define SAVE_10GPRS(n, base) SAVE_8GPRS(n, base); SAVE_2GPRS(n+8, base)
+#define REST_2GPRS(n, base) REST_GPR(n, base); REST_GPR(n+1, base)
+#define REST_4GPRS(n, base) REST_2GPRS(n, base); REST_2GPRS(n+2, base)
+#define REST_8GPRS(n, base) REST_4GPRS(n, base); REST_4GPRS(n+4, base)
+#define REST_10GPRS(n, base) REST_8GPRS(n, base); REST_2GPRS(n+8, base)
+
+/* prom handles the jump into and return from firmware. The prom args pointer
+ is loaded in r3. */
+.globl prom
+prom:
+ mflr r0
+ std r0,16(r1)
+ stdu r1,-PROM_FRAME_SIZE(r1) /* Save SP and create stack space */
+
+ SAVE_GPR(2, r1)
+ SAVE_GPR(13, r1)
+ SAVE_8GPRS(14, r1)
+ SAVE_10GPRS(22, r1)
+ mfcr r10
+ std r10,8*32(r1)
+ mfmsr r10
+ std r10,8*33(r1)
+
+ /* remove MSR_LE from msr but keep MSR_SF */
+ mfmsr r10
+ rldicr r10,r10,0,62
+ mtsrr1 r10
+
+ /* Load FW address, set LR to label 1, and jump to FW */
+ bl 0f
+0: mflr r10
+ addi r11,r10,(1f-0b)
+ mtlr r11
+
+ ld r10,(p_prom-0b)(r10)
+ mtsrr0 r10
+
+ rfid
+
+1: /* Return from OF */
+ FIXUP_ENDIAN
+
+ /* Restore registers and return. */
+ rldicl r1,r1,0,32
+
+ /* Restore the MSR (back to 64 bits) */
+ ld r10,8*(33)(r1)
+ mtmsr r10
+ isync
+
+ /* Restore other registers */
+ REST_GPR(2, r1)
+ REST_GPR(13, r1)
+ REST_8GPRS(14, r1)
+ REST_10GPRS(22, r1)
+ ld r10,8*32(r1)
+ mtcr r10
+
+ addi r1,r1,PROM_FRAME_SIZE
+ ld r0,16(r1)
+ mtlr r0
+ blr
+#endif
diff --git a/arch/powerpc/boot/dcr.h b/arch/powerpc/boot/dcr.h
index cc73f7a95e2..bf8f4ede192 100644
--- a/arch/powerpc/boot/dcr.h
+++ b/arch/powerpc/boot/dcr.h
@@ -15,6 +15,10 @@
asm volatile("mfdcrx %0,%1" : "=r"(rval) : "r"(rn)); \
rval; \
})
+#define mtdcrx(rn, val) \
+ ({ \
+ asm volatile("mtdcrx %0,%1" : : "r"(rn), "r" (val)); \
+ })
/* 440GP/440GX SDRAM controller DCRs */
#define DCRN_SDRAM0_CFGADDR 0x010
diff --git a/arch/powerpc/boot/dts/ac14xx.dts b/arch/powerpc/boot/dts/ac14xx.dts
index a543c4088cb..a1b883730b3 100644
--- a/arch/powerpc/boot/dts/ac14xx.dts
+++ b/arch/powerpc/boot/dts/ac14xx.dts
@@ -139,7 +139,14 @@
};
};
+ clocks {
+ osc {
+ clock-frequency = <25000000>;
+ };
+ };
+
soc@80000000 {
+ bus-frequency = <80000000>; /* 80 MHz ips bus */
clock@f00 {
compatible = "fsl,mpc5121rev2-clock", "fsl,mpc5121-clock";
diff --git a/arch/powerpc/boot/dts/adder875-redboot.dts b/arch/powerpc/boot/dts/adder875-redboot.dts
index 28e9cd3d7a2..083984720b2 100644
--- a/arch/powerpc/boot/dts/adder875-redboot.dts
+++ b/arch/powerpc/boot/dts/adder875-redboot.dts
@@ -87,12 +87,10 @@
PHY0: ethernet-phy@0 {
reg = <0>;
- device_type = "ethernet-phy";
};
PHY1: ethernet-phy@1 {
reg = <1>;
- device_type = "ethernet-phy";
};
};
diff --git a/arch/powerpc/boot/dts/adder875-uboot.dts b/arch/powerpc/boot/dts/adder875-uboot.dts
index 54fb60ec03e..e4554caf8f8 100644
--- a/arch/powerpc/boot/dts/adder875-uboot.dts
+++ b/arch/powerpc/boot/dts/adder875-uboot.dts
@@ -86,12 +86,10 @@
PHY0: ethernet-phy@0 {
reg = <0>;
- device_type = "ethernet-phy";
};
PHY1: ethernet-phy@1 {
reg = <1>;
- device_type = "ethernet-phy";
};
};
diff --git a/arch/powerpc/boot/dts/akebono.dts b/arch/powerpc/boot/dts/akebono.dts
new file mode 100644
index 00000000000..f92ecfed3d2
--- /dev/null
+++ b/arch/powerpc/boot/dts/akebono.dts
@@ -0,0 +1,415 @@
+/*
+ * Device Tree Source for IBM Embedded PPC 476 Platform
+ *
+ * Copyright © 2013 Tony Breeds IBM Corporation
+ * Copyright © 2013 Alistair Popple IBM Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x01f00000 0x00100000; // spin table
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ model = "ibm,akebono";
+ compatible = "ibm,akebono", "ibm,476gtr";
+ dcr-parent = <&{/cpus/cpu@0}>;
+
+ aliases {
+ serial0 = &UART0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,476";
+ reg = <0>;
+ clock-frequency = <1600000000>; // 1.6 GHz
+ timebase-frequency = <100000000>; // 100Mhz
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ status = "ok";
+ };
+ cpu@1 {
+ device_type = "cpu";
+ model = "PowerPC,476";
+ reg = <1>;
+ clock-frequency = <1600000000>; // 1.6 GHz
+ timebase-frequency = <100000000>; // 100Mhz
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ status = "disabled";
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x01f00000>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x0>; // filled in by zImage
+ };
+
+ MPIC: interrupt-controller {
+ compatible = "chrp,open-pic";
+ interrupt-controller;
+ dcr-reg = <0xffc00000 0x00040000>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ single-cpu-affinity;
+ };
+
+ plb {
+ compatible = "ibm,plb6";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clock-frequency = <200000000>; // 200Mhz
+
+ HSTA0: hsta@310000e0000 {
+ compatible = "ibm,476gtr-hsta-msi", "ibm,hsta-msi";
+ reg = <0x310 0x000e0000 0x0 0xf0>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <108 0
+ 109 0
+ 110 0
+ 111 0
+ 112 0
+ 113 0
+ 114 0
+ 115 0
+ 116 0
+ 117 0
+ 118 0
+ 119 0
+ 120 0
+ 121 0
+ 122 0
+ 123 0>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal-476gtr", "ibm,mcmal2";
+ dcr-reg = <0xc0000000 0x062>;
+ num-tx-chans = <1>;
+ num-rx-chans = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-parent = <&MPIC>;
+ interrupts = < /*TXEOB*/ 77 0x4
+ /*RXEOB*/ 78 0x4
+ /*SERR*/ 76 0x4
+ /*TXDE*/ 79 0x4
+ /*RXDE*/ 80 0x4>;
+ };
+
+ SATA0: sata@30000010000 {
+ compatible = "ibm,476gtr-ahci";
+ reg = <0x300 0x00010000 0x0 0x10000>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <93 2>;
+ };
+
+ EHCI0: ehci@30010000000 {
+ compatible = "ibm,476gtr-ehci", "generic-ehci";
+ reg = <0x300 0x10000000 0x0 0x10000>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <85 2>;
+ };
+
+ SD0: sd@30000000000 {
+ compatible = "ibm,476gtr-sdhci", "generic-sdhci";
+ reg = <0x300 0x00000000 0x0 0x10000>;
+ interrupts = <91 2>;
+ interrupt-parent = <&MPIC>;
+ };
+
+ OHCI0: ohci@30010010000 {
+ compatible = "ibm,476gtr-ohci", "generic-ohci";
+ reg = <0x300 0x10010000 0x0 0x10000>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <89 1>;
+ };
+
+ OHCI1: ohci@30010020000 {
+ compatible = "ibm,476gtr-ohci", "generic-ohci";
+ reg = <0x300 0x10020000 0x0 0x10000>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <88 1>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-4xx", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /* Wish there was a nicer way of specifying a full
+ * 32-bit range
+ */
+ ranges = <0x00000000 0x0000033f 0x00000000 0x80000000
+ 0x80000000 0x0000033f 0x80000000 0x80000000>;
+ clock-frequency = <100000000>;
+
+ RGMII0: emac-rgmii-wol@50004 {
+ compatible = "ibm,rgmii-wol-476gtr", "ibm,rgmii-wol";
+ reg = <0x50004 0x00000008>;
+ has-mdio;
+ };
+
+ EMAC0: ethernet@30000 {
+ device_type = "network";
+ compatible = "ibm,emac-476gtr", "ibm,emac4sync";
+ interrupt-parent = <&EMAC0>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &MPIC 81 0x4
+ /*Wake*/ 0x1 &MPIC 82 0x4>;
+ reg = <0x30000 0x78>;
+
+ /* local-mac-address will normally be added by
+ * the wrapper. If your device doesn't support
+ * passing data to the wrapper (in the form
+ * local-mac-addr=<hwaddr>) then you will need
+ * to set it manually here. */
+ //local-mac-address = [000000000000];
+
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ phy-mode = "rgmii";
+ phy-map = <0x00000000>;
+ rgmii-wol-device = <&RGMII0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
+
+ UART0: serial@10000 {
+ device_type = "serial";
+ compatible = "ns16750", "ns16550";
+ reg = <0x10000 0x00000008>;
+ virtual-reg = <0xe8010000>;
+ clock-frequency = <1851851>;
+ current-speed = <38400>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <39 2>;
+ };
+
+ IIC0: i2c@00000000 {
+ compatible = "ibm,iic-476gtr", "ibm,iic";
+ reg = <0x0 0x00000020>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <37 2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ rtc@68 {
+ compatible = "stm,m41t80", "m41st85";
+ reg = <0x68>;
+ };
+ };
+
+ IIC1: i2c@00000100 {
+ compatible = "ibm,iic-476gtr", "ibm,iic";
+ reg = <0x100 0x00000020>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <38 2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ avr@58 {
+ compatible = "ibm,akebono-avr";
+ reg = <0x58>;
+ };
+ };
+
+ FPGA0: fpga@ebc00000 {
+ compatible = "ibm,akebono-fpga";
+ reg = <0xebc00000 0x8>;
+ };
+ };
+
+ PCIE0: pciex@10100000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+ primary;
+ port = <0x0>; /* port number */
+ reg = <0x00000101 0x00000000 0x0 0x10000000 /* Config space access */
+ 0x00000100 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
+ dcr-reg = <0xc0 0x20>;
+
+// pci_space < pci_addr > < cpu_addr > < size >
+ ranges = <0x02000000 0x00000000 0x80000000 0x00000110 0x80000000 0x0 0x80000000
+ 0x01000000 0x0 0x0 0x00000140 0x0 0x0 0x00010000>;
+
+ /* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
+ * PCI devices must be able to write to the HSTA module.
+ */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
+
+ /* This drives busses 0 to 0xf */
+ bus-range = <0x0 0xf>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &MPIC 45 0x2 /* int A */
+ 0x0 0x0 0x0 0x2 &MPIC 46 0x2 /* int B */
+ 0x0 0x0 0x0 0x3 &MPIC 47 0x2 /* int C */
+ 0x0 0x0 0x0 0x4 &MPIC 48 0x2 /* int D */>;
+ };
+
+ PCIE1: pciex@20100000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+ primary;
+ port = <0x1>; /* port number */
+ reg = <0x00000201 0x00000000 0x0 0x10000000 /* Config space access */
+ 0x00000200 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
+ dcr-reg = <0x100 0x20>;
+
+// pci_space < pci_addr > < cpu_addr > < size >
+ ranges = <0x02000000 0x00000000 0x80000000 0x00000210 0x80000000 0x0 0x80000000
+ 0x01000000 0x0 0x0 0x00000240 0x0 0x0 0x00010000>;
+
+ /* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
+ * PCI devices must be able to write to the HSTA module.
+ */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
+
+ /* This drives busses 0 to 0xf */
+ bus-range = <0x0 0xf>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &MPIC 53 0x2 /* int A */
+ 0x0 0x0 0x0 0x2 &MPIC 54 0x2 /* int B */
+ 0x0 0x0 0x0 0x3 &MPIC 55 0x2 /* int C */
+ 0x0 0x0 0x0 0x4 &MPIC 56 0x2 /* int D */>;
+ };
+
+ PCIE2: pciex@18100000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+ primary;
+ port = <0x2>; /* port number */
+ reg = <0x00000181 0x00000000 0x0 0x10000000 /* Config space access */
+ 0x00000180 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
+ dcr-reg = <0xe0 0x20>;
+
+// pci_space < pci_addr > < cpu_addr > < size >
+ ranges = <0x02000000 0x00000000 0x80000000 0x00000190 0x80000000 0x0 0x80000000
+ 0x01000000 0x0 0x0 0x000001c0 0x0 0x0 0x00010000>;
+
+ /* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
+ * PCI devices must be able to write to the HSTA module.
+ */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
+
+ /* This drives busses 0 to 0xf */
+ bus-range = <0x0 0xf>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &MPIC 61 0x2 /* int A */
+ 0x0 0x0 0x0 0x2 &MPIC 62 0x2 /* int B */
+ 0x0 0x0 0x0 0x3 &MPIC 63 0x2 /* int C */
+ 0x0 0x0 0x0 0x4 &MPIC 64 0x2 /* int D */>;
+ };
+
+ PCIE3: pciex@28100000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+ primary;
+ port = <0x3>; /* port number */
+ reg = <0x00000281 0x00000000 0x0 0x10000000 /* Config space access */
+ 0x00000280 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
+ dcr-reg = <0x120 0x20>;
+
+// pci_space < pci_addr > < cpu_addr > < size >
+ ranges = <0x02000000 0x00000000 0x80000000 0x00000290 0x80000000 0x0 0x80000000
+ 0x01000000 0x0 0x0 0x000002c0 0x0 0x0 0x00010000>;
+
+ /* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
+ * PCI devices must be able to write to the HSTA module.
+ */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
+
+ /* This drives busses 0 to 0xf */
+ bus-range = <0x0 0xf>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &MPIC 69 0x2 /* int A */
+ 0x0 0x0 0x0 0x2 &MPIC 70 0x2 /* int B */
+ 0x0 0x0 0x0 0x3 &MPIC 71 0x2 /* int C */
+ 0x0 0x0 0x0 0x4 &MPIC 72 0x2 /* int D */>;
+ };
+ };
+
+ chosen {
+ linux,stdout-path = &UART0;
+ };
+};
diff --git a/arch/powerpc/boot/dts/apollo3g.dts b/arch/powerpc/boot/dts/apollo3g.dts
new file mode 100644
index 00000000000..c2e2af9d19e
--- /dev/null
+++ b/arch/powerpc/boot/dts/apollo3g.dts
@@ -0,0 +1,419 @@
+/*
+ * Device Tree for Bluestone (APM821xx) board.
+ *
+ * Copyright (c) 2010, Applied Micro Circuits Corporation
+ * Author: Tirumala R Marri <tmarri@apm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "apm,bluestone";
+ compatible = "apm,bluestone";
+ dcr-parent = <&{/cpus/cpu@0}>;
+
+ aliases {
+ ethernet0 = &EMAC0;
+ serial0 = &UART0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,apm821xx";
+ reg = <0x00000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ timebase-frequency = <0>; /* Filled in by U-Boot */
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ next-level-cache = <&L2C0>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+ };
+
+ UIC0: interrupt-controller0 {
+ compatible = "ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0x0c0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0x0d0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC2: interrupt-controller2 {
+ compatible = "ibm,uic";
+ interrupt-controller;
+ cell-index = <2>;
+ dcr-reg = <0x0e0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC3: interrupt-controller3 {
+ compatible = "ibm,uic";
+ interrupt-controller;
+ cell-index = <3>;
+ dcr-reg = <0x0f0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ OCM: ocm@400040000 {
+ compatible = "ibm,ocm";
+ status = "ok";
+ cell-index = <1>;
+ /* configured in U-Boot */
+ reg = <4 0x00040000 0x8000>; /* 32K */
+ };
+
+ SDR0: sdr {
+ compatible = "ibm,sdr-apm821xx";
+ dcr-reg = <0x00e 0x002>;
+ };
+
+ CPR0: cpr {
+ compatible = "ibm,cpr-apm821xx";
+ dcr-reg = <0x00c 0x002>;
+ };
+
+ L2C0: l2c {
+ compatible = "ibm,l2-cache-apm82181", "ibm,l2-cache";
+ dcr-reg = <0x020 0x008
+ 0x030 0x008>;
+ cache-line-size = <32>;
+ cache-size = <262144>;
+ interrupt-parent = <&UIC1>;
+ interrupts = <11 1>;
+ };
+
+ plb {
+ compatible = "ibm,plb4";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ SDRAM0: sdram {
+ compatible = "ibm,sdram-apm821xx";
+ dcr-reg = <0x010 0x002>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal2";
+ descriptor-memory = "ocm";
+ dcr-reg = <0x180 0x062>;
+ num-tx-chans = <1>;
+ num-rx-chans = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-parent = <&UIC2>;
+ interrupts = < /*TXEOB*/ 0x6 0x4
+ /*RXEOB*/ 0x7 0x4
+ /*SERR*/ 0x3 0x4
+ /*TXDE*/ 0x4 0x4
+ /*RXDE*/ 0x5 0x4
+ /*TX0 COAL*/ 0x8 0x2
+ /*TX1 COAL 0x9 0x2*/
+ /*RX0 COAL*/ 0xc 0x2
+ /*RX1 COAL 0xd 0x2*/>;
+ };
+
+ /* SATA DWC devices */
+ SATA0: sata@bffd1000 {
+ compatible = "amcc,sata-460ex";
+ reg = <4 0xbffd1000 0x800 /* SATA0 */
+ 4 0xbffd0800 0x400>; /* AHBDMA */
+ dma-channel=<0>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <26 4 /* SATA0 */
+ 25 4>; /* AHBDMA */
+ };
+
+ SATA1: sata@bffd1800 {
+ compatible = "amcc,sata-460ex";
+ reg = <4 0xbffd1800 0x800 /* SATA1 */
+ 4 0xbffd0800 0x400>; /* AHBDMA */
+ dma-channel=<1>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <27 4 /* SATA1 */
+ 25 4>; /* AHBDMA */
+ };
+
+ ADMA: adma {
+ compatible = "amcc,apm82181-adma";
+ device_type = "dma";
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ /*dma-4channel@0{
+ compatible = "amcc,apm82181-dma-4channel";
+ cell-index = <0>;
+ label = "plb_dma0";
+ interrupt-parent = <&UIC0>;
+ interrupts = <0xc 0x4>;
+ pool_size = <0x4000>;
+ dcr-reg = <0x200 0x207>;
+ };*/
+
+ dma-4channel@1 {
+ compatible = "amcc,apm82181-dma-4channel";
+ cell-index = <1>;
+ label = "plb_dma1";
+ interrupt-parent = <&UIC0>;
+ interrupts = <0xd 0x4>;
+ pool_size = <0x4000>;
+ dcr-reg = <0x208 0x20f>;
+ };
+ dma-4channel@2 {
+ compatible = "amcc,apm82181-dma-4channel";
+ cell-index = <2>;
+ label = "plb_dma2";
+ interrupt-parent = <&UIC0>;
+ interrupts = <0xe 0x4>;
+ pool_size = <0x4000>;
+ dcr-reg = <0x210 0x217>;
+ };
+ dma-4channel@3 {
+ compatible = "amcc,apm82181-dma-4channel";
+ cell-index = <3>;
+ label = "plb_dma3";
+ interrupt-parent = <&UIC0>;
+ interrupts = <0xf 0x4>;
+ pool_size = <0x4000>;
+ dcr-reg = <0x218 0x21f>;
+ };
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ EBC0: ebc {
+ compatible = "ibm,ebc";
+ dcr-reg = <0x012 0x002>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ /* ranges property is supplied by U-Boot */
+ ranges = < 0x00000003 0x00000000 0xe0000000 0x8000000>;
+ interrupts = <0x6 0x4>;
+ interrupt-parent = <&UIC1>;
+
+ nor_flash@0,0 {
+ compatible = "amd,s29gl512n", "jedec-flash", "cfi-flash";
+ bank-width = <1>;
+ reg = <0x00000000 0x00000000 0x00080000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "3genv";
+ reg = <0x00000000 0x20000>;
+ };
+ partition@1 {
+ label = "u-boot";
+ reg = <0x20000 0x60000>;
+ };
+ };
+
+ ndfc@1,0 {
+ compatible = "ibm,ndfc";
+ reg = <0x00000003 0x00000000 0x00002000>;
+ ccr = <0x00001000>;
+ bank-settings = <0x80002222>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /* 2Gb Nand Flash */
+ nand {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "firmware";
+ reg = <0x00000000 0x00C00000>;
+ };
+ partition@c00000 {
+ label = "environment";
+ reg = <0x00C00000 0x00B00000>;
+ };
+ partition@1700000 {
+ label = "kernel";
+ reg = <0x01700000 0x00E00000>;
+ };
+ partition@2500000 {
+ label = "root";
+ reg = <0x02500000 0x08200000>;
+ };
+ partition@a700000 {
+ label = "device-tree";
+ reg = <0x0A700000 0x00B00000>;
+ };
+ partition@b200000 {
+ label = "config";
+ reg = <0x0B200000 0x00D00000>;
+ };
+ partition@bf00000 {
+ label = "diag";
+ reg = <0x0BF00000 0x00C00000>;
+ };
+ partition@cb00000 {
+ label = "vendor";
+ reg = <0x0CB00000 0x3500000>;
+ };
+ };
+ };
+ };
+
+ UART0: serial@ef600300 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x1 0x4>;
+ };
+
+ IIC0: i2c@ef600700 {
+ compatible = "ibm,iic";
+ reg = <0xef600700 0x00000014>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x2 0x4>;
+ };
+
+ RGMII0: emac-rgmii@ef601500 {
+ compatible = "ibm,rgmii";
+ reg = <0xef601500 0x00000008>;
+ has-mdio;
+ };
+
+ TAH0: emac-tah@ef601350 {
+ compatible = "ibm,tah";
+ reg = <0xef601350 0x00000030>;
+ };
+
+ EMAC0: ethernet@ef600c00 {
+ device_type = "network";
+ compatible = "ibm,emac-apm821xx", "ibm,emac4sync";
+ interrupt-parent = <&EMAC0>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+ /*Wake*/ 0x1 &UIC2 0x14 0x4>;
+ reg = <0xef600c00 0x000000c4>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <16384>;
+ tx-fifo-size = <2048>;
+ phy-mode = "rgmii";
+ phy-map = <0x00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <0>;
+ tah-device = <&TAH0>;
+ tah-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
+ };
+
+ DMA: plb_dma@400300200 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "amcc,dma";
+ cell-index = <0>;
+ reg = <4 0x00300200 0x200>;
+ dcr-reg = <0x100 0x13f>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0 1 2 3>;
+ interrupt-map = < /*chan 0*/ 0 &UIC0 12 4
+ /* chan1*/ 1 &UIC0 13 4
+ /* chan2*/ 2 &UIC0 14 4
+ /* chan3*/ 3 &UIC0 15 4>;
+
+
+ dma-4channel@0{
+ compatible = "amcc,dma-4channel";
+ cell-index = <0>;
+ label = "channel0";
+ reg = <0x100 0x107>;
+ };
+ /*
+ dma-4channel@1 {
+ compatible = "amcc,dma-4channel";
+ cell-index = <1>;
+ label = "channel1";
+ reg = <0x108 0x10f>;
+ };
+ dma-4channel@2 {
+ compatible = "amcc,dma-4channel";
+ cell-index = <2>;
+ label = "channel2";
+ reg = <0x110 0x117>;
+ };
+ dma-4channel@3 {
+ compatible = "amcc,dma-4channel";
+ cell-index = <3>;
+ label = "channel3";
+ reg = <0x118 0x11f>;
+ };
+ */
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/asp834x-redboot.dts b/arch/powerpc/boot/dts/asp834x-redboot.dts
index 227290db866..9198745f45f 100644
--- a/arch/powerpc/boot/dts/asp834x-redboot.dts
+++ b/arch/powerpc/boot/dts/asp834x-redboot.dts
@@ -207,14 +207,12 @@
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x1>;
- device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x2>;
- device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
diff --git a/arch/powerpc/boot/dts/b4860emu.dts b/arch/powerpc/boot/dts/b4860emu.dts
new file mode 100644
index 00000000000..85646b4f96e
--- /dev/null
+++ b/arch/powerpc/boot/dts/b4860emu.dts
@@ -0,0 +1,223 @@
+/*
+ * B4860 emulator Device Tree Source
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of
+ * this software, even if advised of the possibility of such damage.
+ */
+
+/dts-v1/;
+
+/include/ "fsl/e6500_power_isa.dtsi"
+
+/ {
+ compatible = "fsl,B4860";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e6500@0 {
+ device_type = "cpu";
+ reg = <0 1>;
+ next-level-cache = <&L2>;
+ fsl,portid-mapping = <0x80000000>;
+ };
+ cpu1: PowerPC,e6500@2 {
+ device_type = "cpu";
+ reg = <2 3>;
+ next-level-cache = <&L2>;
+ fsl,portid-mapping = <0x80000000>;
+ };
+ cpu2: PowerPC,e6500@4 {
+ device_type = "cpu";
+ reg = <4 5>;
+ next-level-cache = <&L2>;
+ fsl,portid-mapping = <0x80000000>;
+ };
+ cpu3: PowerPC,e6500@6 {
+ device_type = "cpu";
+ reg = <6 7>;
+ next-level-cache = <&L2>;
+ fsl,portid-mapping = <0x80000000>;
+ };
+ };
+};
+
+/ {
+ model = "fsl,B4860QDS";
+ compatible = "fsl,B4860EMU", "fsl,B4860QDS";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ ifc: localbus@ffe124000 {
+ reg = <0xf 0xfe124000 0 0x2000>;
+ ranges = <0 0 0xf 0xe8000000 0x08000000
+ 2 0 0xf 0xff800000 0x00010000
+ 3 0 0xf 0xffdf0000 0x00008000>;
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
+ };
+};
+
+&ifc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc", "simple-bus";
+ interrupts = <25 2 0 0>;
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 2>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ ddr1: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 8>;
+ };
+
+ ddr2: memory-controller@9000 {
+ compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller";
+ reg = <0x9000 0x1000>;
+ interrupts = <16 2 1 9>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,b4-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000
+ 0x11000 0x1000>;
+ interrupts = <16 2 1 4>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 0>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x4000>;
+ fsl,portid-mapping = <0x8000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 1>;
+ pamu0: pamu@0 {
+ reg = <0 0x1000>;
+ fsl,primary-cache-geometry = <8 1>;
+ fsl,secondary-cache-geometry = <32 2>;
+ };
+ };
+
+/include/ "fsl/qoriq-mpic.dtsi"
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,b4-device-config";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ fsl,liodn-bits = <12>;
+ };
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,b4-clockgen", "fsl,qoriq-clockgen-2.0";
+ reg = <0xe1000 0x1000>;
+ };
+
+/include/ "fsl/qoriq-dma-0.dtsi"
+ dma@100300 {
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+ };
+
+/include/ "fsl/qoriq-dma-1.dtsi"
+ dma@101300 {
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+ };
+
+/include/ "fsl/qoriq-i2c-0.dtsi"
+/include/ "fsl/qoriq-i2c-1.dtsi"
+/include/ "fsl/qoriq-duart-0.dtsi"
+/include/ "fsl/qoriq-duart-1.dtsi"
+
+ L2: l2-cache-controller@c20000 {
+ compatible = "fsl,b4-l2-cache-controller";
+ reg = <0xc20000 0x1000>;
+ next-level-cache = <&cpc>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/b4qds.dtsi b/arch/powerpc/boot/dts/b4qds.dtsi
index e6d2f8f9054..8b47edcfabf 100644
--- a/arch/powerpc/boot/dts/b4qds.dtsi
+++ b/arch/powerpc/boot/dts/b4qds.dtsi
@@ -120,25 +120,38 @@
};
i2c@118000 {
- eeprom@50 {
- compatible = "at24,24c64";
- reg = <0x50>;
- };
- eeprom@51 {
- compatible = "at24,24c256";
- reg = <0x51>;
- };
- eeprom@53 {
- compatible = "at24,24c256";
- reg = <0x53>;
- };
- eeprom@57 {
- compatible = "at24,24c256";
- reg = <0x57>;
- };
- rtc@68 {
- compatible = "dallas,ds3232";
- reg = <0x68>;
+ mux@77 {
+ compatible = "nxp,pca9547";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ eeprom@50 {
+ compatible = "at24,24c64";
+ reg = <0x50>;
+ };
+ eeprom@51 {
+ compatible = "at24,24c256";
+ reg = <0x51>;
+ };
+ eeprom@53 {
+ compatible = "at24,24c256";
+ reg = <0x53>;
+ };
+ eeprom@57 {
+ compatible = "at24,24c256";
+ reg = <0x57>;
+ };
+ rtc@68 {
+ compatible = "dallas,ds3232";
+ reg = <0x68>;
+ };
+ };
};
};
diff --git a/arch/powerpc/boot/dts/bsc9132qds.dts b/arch/powerpc/boot/dts/bsc9132qds.dts
new file mode 100644
index 00000000000..6cab1062bc7
--- /dev/null
+++ b/arch/powerpc/boot/dts/bsc9132qds.dts
@@ -0,0 +1,35 @@
+/*
+ * BSC9132 QDS Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/bsc9132si-pre.dtsi"
+
+/ {
+ model = "fsl,bsc9132qds";
+ compatible = "fsl,bsc9132qds";
+
+ memory {
+ device_type = "memory";
+ };
+
+ ifc: ifc@ff71e000 {
+ /* NOR, NAND Flash on board */
+ ranges = <0x0 0x0 0x0 0x88000000 0x08000000
+ 0x1 0x0 0x0 0xff800000 0x00010000>;
+ reg = <0x0 0xff71e000 0x0 0x2000>;
+ };
+
+ soc: soc@ff700000 {
+ ranges = <0x0 0x0 0xff700000 0x100000>;
+ };
+};
+
+/include/ "bsc9132qds.dtsi"
+/include/ "fsl/bsc9132si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/bsc9132qds.dtsi b/arch/powerpc/boot/dts/bsc9132qds.dtsi
new file mode 100644
index 00000000000..af8e8883022
--- /dev/null
+++ b/arch/powerpc/boot/dts/bsc9132qds.dtsi
@@ -0,0 +1,101 @@
+/*
+ * BSC9132 QDS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc-nand";
+ reg = <0x1 0x0 0x4000>;
+ };
+};
+
+&soc {
+ spi@7000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25sl12801";
+ reg = <0>;
+ spi-max-frequency = <30000000>;
+ };
+ };
+
+ i2c@3000 {
+ fpga: fpga@66 {
+ compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
+ reg = <0x66>;
+ };
+ };
+
+ usb@22000 {
+ phy_type = "ulpi";
+ };
+
+ mdio@24000 {
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x1f>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet0: ethernet@b0000 {
+ phy-handle = <&phy0>;
+ tbi-handle = <&tbi0>;
+ phy-connection-type = "sgmii";
+ };
+
+ enet1: ethernet@b1000 {
+ phy-handle = <&phy1>;
+ tbi-handle = <&tbi0>;
+ phy-connection-type = "sgmii";
+ };
+};
diff --git a/arch/powerpc/boot/dts/c293pcie.dts b/arch/powerpc/boot/dts/c293pcie.dts
index 1238bda8901..6681cc21030 100644
--- a/arch/powerpc/boot/dts/c293pcie.dts
+++ b/arch/powerpc/boot/dts/c293pcie.dts
@@ -45,6 +45,7 @@
ifc: ifc@fffe1e000 {
reg = <0xf 0xffe1e000 0 0x2000>;
ranges = <0x0 0x0 0xf 0xec000000 0x04000000
+ 0x1 0x0 0xf 0xff800000 0x00010000
0x2 0x0 0xf 0xffdf0000 0x00010000>;
};
diff --git a/arch/powerpc/boot/dts/c2k.dts b/arch/powerpc/boot/dts/c2k.dts
index f5d625fa3e5..1e32903cb0a 100644
--- a/arch/powerpc/boot/dts/c2k.dts
+++ b/arch/powerpc/boot/dts/c2k.dts
@@ -73,19 +73,16 @@
compatible = "marvell,mv64360-mdio";
reg = <0x2000 4>;
PHY0: ethernet-phy@0 {
- device_type = "ethernet-phy";
interrupts = <76>; /* GPP 12 */
interrupt-parent = <&PIC>;
reg = <0>;
};
PHY1: ethernet-phy@1 {
- device_type = "ethernet-phy";
interrupts = <76>; /* GPP 12 */
interrupt-parent = <&PIC>;
reg = <1>;
};
PHY2: ethernet-phy@2 {
- device_type = "ethernet-phy";
interrupts = <76>; /* GPP 12 */
interrupt-parent = <&PIC>;
reg = <2>;
@@ -174,7 +171,6 @@
};
MPSC0: mpsc@8000 {
- device_type = "serial";
compatible = "marvell,mv64360-mpsc";
reg = <0x8000 0x38>;
virtual-reg = <0xd8008000>;
@@ -189,7 +185,6 @@
};
MPSC1: mpsc@9000 {
- device_type = "serial";
compatible = "marvell,mv64360-mpsc";
reg = <0x9000 0x38>;
virtual-reg = <0xd8009000>;
diff --git a/arch/powerpc/boot/dts/ep8248e.dts b/arch/powerpc/boot/dts/ep8248e.dts
index 756758fb5b7..8b3a49f34f5 100644
--- a/arch/powerpc/boot/dts/ep8248e.dts
+++ b/arch/powerpc/boot/dts/ep8248e.dts
@@ -67,7 +67,6 @@
ranges;
mdio {
- device_type = "mdio";
compatible = "fsl,ep8248e-mdio-bitbang";
#address-cells = <1>;
#size-cells = <0>;
@@ -76,13 +75,11 @@
PHY0: ethernet-phy@0 {
interrupt-parent = <&PIC>;
reg = <0>;
- device_type = "ethernet-phy";
};
PHY1: ethernet-phy@1 {
interrupt-parent = <&PIC>;
reg = <1>;
- device_type = "ethernet-phy";
};
};
};
diff --git a/arch/powerpc/boot/dts/ep88xc.dts b/arch/powerpc/boot/dts/ep88xc.dts
index ae57d624012..2aa5bf55964 100644
--- a/arch/powerpc/boot/dts/ep88xc.dts
+++ b/arch/powerpc/boot/dts/ep88xc.dts
@@ -85,12 +85,10 @@
PHY0: ethernet-phy@0 {
reg = <0x0>;
- device_type = "ethernet-phy";
};
PHY1: ethernet-phy@1 {
reg = <0x1>;
- device_type = "ethernet-phy";
};
};
diff --git a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
index 5a6615d0ade..d67894459ac 100644
--- a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
@@ -76,16 +76,48 @@
compatible = "fsl,b4420-l3-cache-controller", "cache";
};
- corenet-cf@18000 {
- compatible = "fsl,b4420-corenet-cf";
- };
-
guts: global-utilities@e0000 {
compatible = "fsl,b4420-device-config", "fsl,qoriq-device-config-2.0";
};
clockgen: global-utilities@e1000 {
compatible = "fsl,b4420-clockgen", "fsl,qoriq-clockgen-2.0";
+ ranges = <0x0 0xe1000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysclk: sysclk {
+ #clock-cells = <0>;
+ compatible = "fsl,qoriq-sysclk-2.0";
+ clock-output-names = "sysclk";
+ };
+
+ pll0: pll0@800 {
+ #clock-cells = <1>;
+ reg = <0x800 0x4>;
+ compatible = "fsl,qoriq-core-pll-2.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll0", "pll0-div2", "pll0-div4";
+ };
+
+ pll1: pll1@820 {
+ #clock-cells = <1>;
+ reg = <0x820 0x4>;
+ compatible = "fsl,qoriq-core-pll-2.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll1", "pll1-div2", "pll1-div4";
+ };
+
+ mux0: mux0@0 {
+ #clock-cells = <0>;
+ reg = <0x0 0x4>;
+ compatible = "fsl,qoriq-core-mux-2.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+ <&pll1 0>, <&pll1 1>, <&pll1 2>;
+ clock-names = "pll0", "pll0-div2", "pll0-div4",
+ "pll1", "pll1-div2", "pll1-div4";
+ clock-output-names = "cmux0";
+ };
};
rcpm: global-utilities@e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
index 7b4426e0a5a..338af7e39dd 100644
--- a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
@@ -34,6 +34,8 @@
/dts-v1/;
+/include/ "e6500_power_isa.dtsi"
+
/ {
compatible = "fsl,B4420";
#address-cells = <2>;
@@ -62,12 +64,16 @@
cpu0: PowerPC,e6500@0 {
device_type = "cpu";
reg = <0 1>;
+ clocks = <&mux0>;
next-level-cache = <&L2>;
+ fsl,portid-mapping = <0x80000000>;
};
cpu1: PowerPC,e6500@2 {
device_type = "cpu";
reg = <2 3>;
+ clocks = <&mux0>;
next-level-cache = <&L2>;
+ fsl,portid-mapping = <0x80000000>;
};
};
};
diff --git a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
index e5cf6c81dd6..582381dba1d 100644
--- a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
@@ -41,7 +41,7 @@
&rio {
compatible = "fsl,srio";
- interrupts = <16 2 1 11>;
+ interrupts = <16 2 1 20>;
#address-cells = <2>;
#size-cells = <2>;
fsl,iommu-parent = <&pamu0>;
@@ -120,16 +120,48 @@
compatible = "fsl,b4860-l3-cache-controller", "cache";
};
- corenet-cf@18000 {
- compatible = "fsl,b4860-corenet-cf";
- };
-
guts: global-utilities@e0000 {
compatible = "fsl,b4860-device-config", "fsl,qoriq-device-config-2.0";
};
clockgen: global-utilities@e1000 {
compatible = "fsl,b4860-clockgen", "fsl,qoriq-clockgen-2.0";
+ ranges = <0x0 0xe1000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysclk: sysclk {
+ #clock-cells = <0>;
+ compatible = "fsl,qoriq-sysclk-2.0";
+ clock-output-names = "sysclk";
+ };
+
+ pll0: pll0@800 {
+ #clock-cells = <1>;
+ reg = <0x800 0x4>;
+ compatible = "fsl,qoriq-core-pll-2.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll0", "pll0-div2", "pll0-div4";
+ };
+
+ pll1: pll1@820 {
+ #clock-cells = <1>;
+ reg = <0x820 0x4>;
+ compatible = "fsl,qoriq-core-pll-2.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll1", "pll1-div2", "pll1-div4";
+ };
+
+ mux0: mux0@0 {
+ #clock-cells = <0>;
+ reg = <0x0 0x4>;
+ compatible = "fsl,qoriq-core-mux-2.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+ <&pll1 0>, <&pll1 1>, <&pll1 2>;
+ clock-names = "pll0", "pll0-div2", "pll0-div4",
+ "pll1", "pll1-div2", "pll1-div4";
+ clock-output-names = "cmux0";
+ };
};
rcpm: global-utilities@e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
index 5263fa46a3f..1948f73fd26 100644
--- a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
@@ -34,6 +34,8 @@
/dts-v1/;
+/include/ "e6500_power_isa.dtsi"
+
/ {
compatible = "fsl,B4860";
#address-cells = <2>;
@@ -62,22 +64,30 @@
cpu0: PowerPC,e6500@0 {
device_type = "cpu";
reg = <0 1>;
+ clocks = <&mux0>;
next-level-cache = <&L2>;
+ fsl,portid-mapping = <0x80000000>;
};
cpu1: PowerPC,e6500@2 {
device_type = "cpu";
reg = <2 3>;
+ clocks = <&mux0>;
next-level-cache = <&L2>;
+ fsl,portid-mapping = <0x80000000>;
};
cpu2: PowerPC,e6500@4 {
device_type = "cpu";
reg = <4 5>;
+ clocks = <&mux0>;
next-level-cache = <&L2>;
+ fsl,portid-mapping = <0x80000000>;
};
cpu3: PowerPC,e6500@6 {
device_type = "cpu";
reg = <6 7>;
+ clocks = <&mux0>;
next-level-cache = <&L2>;
+ fsl,portid-mapping = <0x80000000>;
};
};
};
diff --git a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
index 4c617bf8cdb..1a54ba71f68 100644
--- a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
@@ -158,7 +158,7 @@
};
corenet-cf@18000 {
- compatible = "fsl,b4-corenet-cf";
+ compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
reg = <0x18000 0x1000>;
interrupts = <16 2 1 0>;
fsl,ccf-num-csdids = <32>;
@@ -168,6 +168,7 @@
iommu@20000 {
compatible = "fsl,pamu-v1.0", "fsl,pamu";
reg = <0x20000 0x4000>;
+ fsl,portid-mapping = <0x8000>;
#address-cells = <1>;
#size-cells = <1>;
interrupts = <
@@ -223,13 +224,13 @@
reg = <0xe2000 0x1000>;
};
-/include/ "qoriq-dma-0.dtsi"
+/include/ "elo3-dma-0.dtsi"
dma@100300 {
fsl,iommu-parent = <&pamu0>;
fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
};
-/include/ "qoriq-dma-1.dtsi"
+/include/ "elo3-dma-1.dtsi"
dma@101300 {
fsl,iommu-parent = <&pamu0>;
fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
diff --git a/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi b/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi
index 5180d9d3798..0c0efa94cfb 100644
--- a/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi
@@ -130,7 +130,7 @@ usb@22000 {
/include/ "pq3-esdhc-0.dtsi"
sdhc@2e000 {
- fsl,sdhci-auto-cmd12;
+ sdhci,auto-cmd12;
interrupts = <41 0x2 0 0>;
};
diff --git a/arch/powerpc/boot/dts/fsl/bsc9131si-pre.dtsi b/arch/powerpc/boot/dts/fsl/bsc9131si-pre.dtsi
index 743e4aeda34..f6ec4a67560 100644
--- a/arch/powerpc/boot/dts/fsl/bsc9131si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/bsc9131si-pre.dtsi
@@ -33,6 +33,9 @@
*/
/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
/ {
compatible = "fsl,BSC9131";
#address-cells = <2>;
diff --git a/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi
new file mode 100644
index 00000000000..c7230719814
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi
@@ -0,0 +1,185 @@
+/*
+ * BSC9132 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc", "simple-bus";
+ /* FIXME: Test whether interrupts are split */
+ interrupts = <16 2 0 0 20 2 0 0>;
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,bsc9132-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,bsc9132-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,bsc9132-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <16 2 1 8>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+ i2c@3000 {
+ interrupts = <17 2 0 0>;
+ };
+
+/include/ "pq3-i2c-1.dtsi"
+ i2c@3100 {
+ interrupts = <17 2 0 0>;
+ };
+
+/include/ "pq3-duart-0.dtsi"
+ serial0: serial@4500 {
+ interrupts = <18 2 0 0>;
+ };
+
+ serial1: serial@4600 {
+ interrupts = <18 2 0 0 >;
+ };
+/include/ "pq3-espi-0.dtsi"
+ spi0: spi@7000 {
+ fsl,espi-num-chipselects = <1>;
+ interrupts = <22 0x2 0 0>;
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+ gpio-controller@f000 {
+ interrupts = <19 0x2 0 0>;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,bsc9132-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupts = <16 2 1 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+
+dma@21300 {
+
+ dma-channel@0 {
+ interrupts = <62 2 0 0>;
+ };
+
+ dma-channel@80 {
+ interrupts = <63 2 0 0>;
+ };
+
+ dma-channel@100 {
+ interrupts = <64 2 0 0>;
+ };
+
+ dma-channel@180 {
+ interrupts = <65 2 0 0>;
+ };
+};
+
+/include/ "pq3-usb2-dr-0.dtsi"
+usb@22000 {
+ compatible = "fsl-usb2-dr","fsl-usb2-dr-v2.2";
+ interrupts = <40 0x2 0 0>;
+};
+
+/include/ "pq3-esdhc-0.dtsi"
+ sdhc@2e000 {
+ fsl,sdhci-auto-cmd12;
+ interrupts = <41 0x2 0 0>;
+ };
+
+/include/ "pq3-sec4.4-0.dtsi"
+crypto@30000 {
+ interrupts = <57 2 0 0>;
+
+ sec_jr0: jr@1000 {
+ interrupts = <58 2 0 0>;
+ };
+
+ sec_jr1: jr@2000 {
+ interrupts = <59 2 0 0>;
+ };
+
+ sec_jr2: jr@3000 {
+ interrupts = <60 2 0 0>;
+ };
+
+ sec_jr3: jr@4000 {
+ interrupts = <61 2 0 0>;
+ };
+};
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+enet0: ethernet@b0000 {
+ queue-group@b0000 {
+ fsl,rx-bit-map = <0xff>;
+ fsl,tx-bit-map = <0xff>;
+ interrupts = <26 2 0 0 27 2 0 0 28 2 0 0>;
+ };
+};
+
+/include/ "pq3-etsec2-1.dtsi"
+enet1: ethernet@b1000 {
+ queue-group@b1000 {
+ fsl,rx-bit-map = <0xff>;
+ fsl,tx-bit-map = <0xff>;
+ interrupts = <33 2 0 0 34 2 0 0 35 2 0 0>;
+ };
+};
+
+global-utilities@e0000 {
+ compatible = "fsl,bsc9132-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi
new file mode 100644
index 00000000000..301a9dba579
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi
@@ -0,0 +1,66 @@
+/*
+ * BSC9132 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e500v2@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu1: PowerPC,e500v2@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi b/arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi
new file mode 100644
index 00000000000..3c210e0d520
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi
@@ -0,0 +1,82 @@
+/*
+ * QorIQ Elo3 DMA device tree stub [ controller @ offset 0x100000 ]
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma0: dma@100300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,elo3-dma";
+ reg = <0x100300 0x4>,
+ <0x100600 0x4>;
+ ranges = <0x0 0x100100 0x500>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ interrupts = <28 2 0 0>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ interrupts = <29 2 0 0>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ interrupts = <30 2 0 0>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ interrupts = <31 2 0 0>;
+ };
+ dma-channel@300 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x300 0x80>;
+ interrupts = <76 2 0 0>;
+ };
+ dma-channel@380 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x380 0x80>;
+ interrupts = <77 2 0 0>;
+ };
+ dma-channel@400 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x400 0x80>;
+ interrupts = <78 2 0 0>;
+ };
+ dma-channel@480 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x480 0x80>;
+ interrupts = <79 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi b/arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi
new file mode 100644
index 00000000000..cccf3bb3822
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi
@@ -0,0 +1,82 @@
+/*
+ * QorIQ Elo3 DMA device tree stub [ controller @ offset 0x101000 ]
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma1: dma@101300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,elo3-dma";
+ reg = <0x101300 0x4>,
+ <0x101600 0x4>;
+ ranges = <0x0 0x101100 0x500>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ interrupts = <32 2 0 0>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ interrupts = <33 2 0 0>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ interrupts = <34 2 0 0>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ interrupts = <35 2 0 0>;
+ };
+ dma-channel@300 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x300 0x80>;
+ interrupts = <80 2 0 0>;
+ };
+ dma-channel@380 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x380 0x80>;
+ interrupts = <81 2 0 0>;
+ };
+ dma-channel@400 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x400 0x80>;
+ interrupts = <82 2 0 0>;
+ };
+ dma-channel@480 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x480 0x80>;
+ interrupts = <83 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi b/arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi
new file mode 100644
index 00000000000..d3cc8d0f7c2
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi
@@ -0,0 +1,82 @@
+/*
+ * QorIQ Elo3 DMA device tree stub [ controller @ offset 0x102300 ]
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma2: dma@102300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,elo3-dma";
+ reg = <0x102300 0x4>,
+ <0x102600 0x4>;
+ ranges = <0x0 0x102100 0x500>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ interrupts = <464 2 0 0>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ interrupts = <465 2 0 0>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ interrupts = <466 2 0 0>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ interrupts = <467 2 0 0>;
+ };
+ dma-channel@300 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x300 0x80>;
+ interrupts = <468 2 0 0>;
+ };
+ dma-channel@380 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x380 0x80>;
+ interrupts = <469 2 0 0>;
+ };
+ dma-channel@400 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x400 0x80>;
+ interrupts = <470 2 0 0>;
+ };
+ dma-channel@480 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x480 0x80>;
+ interrupts = <471 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
index 68cc5e7f647..642dc3a83d0 100644
--- a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
@@ -36,7 +36,8 @@
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
- interrupts = <19 2 0 0>;
+ interrupts = <19 2 0 0>,
+ <16 2 0 0>;
};
/* controller at 0x9000 */
diff --git a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
index adb82fd9057..407cb5fd0f5 100644
--- a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
@@ -36,7 +36,8 @@
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
- interrupts = <19 2 0 0>;
+ interrupts = <19 2 0 0>,
+ <16 2 0 0>;
};
/* controller at 0x9000 */
diff --git a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
index e179803a81e..ebf20223454 100644
--- a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
@@ -40,7 +40,8 @@
* pin muxing when the DIU is enabled.
*/
compatible = "fsl,p1022-elbc", "fsl,elbc";
- interrupts = <19 2 0 0>;
+ interrupts = <19 2 0 0>,
+ <16 2 0 0>;
};
/* controller at 0x9000 */
diff --git a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi
index f1105bffa91..81437fdf1db 100644
--- a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi
@@ -36,7 +36,8 @@
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus";
- interrupts = <19 2 0 0>;
+ interrupts = <19 2 0 0>,
+ <16 2 0 0>;
};
/* controller at 0xa000 */
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
index dc6cc5afd18..5290df83ff3 100644
--- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
@@ -246,7 +246,7 @@
};
corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
+ compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
reg = <0x18000 0x1000>;
interrupts = <16 2 1 31>;
fsl,ccf-num-csdids = <32>;
@@ -262,6 +262,7 @@
interrupts = <
24 2 0 0
16 2 1 30>;
+ fsl,portid-mapping = <0x0f000000>;
pamu0: pamu@0 {
reg = <0 0x1000>;
@@ -306,8 +307,68 @@
clockgen: global-utilities@e1000 {
compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
+ ranges = <0x0 0xe1000 0x1000>;
reg = <0xe1000 0x1000>;
clock-frequency = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysclk: sysclk {
+ #clock-cells = <0>;
+ compatible = "fsl,qoriq-sysclk-1.0";
+ clock-output-names = "sysclk";
+ };
+
+ pll0: pll0@800 {
+ #clock-cells = <1>;
+ reg = <0x800 0x4>;
+ compatible = "fsl,qoriq-core-pll-1.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll0", "pll0-div2";
+ };
+
+ pll1: pll1@820 {
+ #clock-cells = <1>;
+ reg = <0x820 0x4>;
+ compatible = "fsl,qoriq-core-pll-1.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll1", "pll1-div2";
+ };
+
+ mux0: mux0@0 {
+ #clock-cells = <0>;
+ reg = <0x0 0x4>;
+ compatible = "fsl,qoriq-core-mux-1.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+ clock-output-names = "cmux0";
+ };
+
+ mux1: mux1@20 {
+ #clock-cells = <0>;
+ reg = <0x20 0x4>;
+ compatible = "fsl,qoriq-core-mux-1.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+ clock-output-names = "cmux1";
+ };
+
+ mux2: mux2@40 {
+ #clock-cells = <0>;
+ reg = <0x40 0x4>;
+ compatible = "fsl,qoriq-core-mux-1.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+ };
+
+ mux3: mux3@60 {
+ #clock-cells = <0>;
+ reg = <0x60 0x4>;
+ compatible = "fsl,qoriq-core-mux-1.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+ clock-output-names = "cmux3";
+ };
};
rcpm: global-utilities@e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
index 7a2697d0454..b1ea147f299 100644
--- a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
@@ -81,7 +81,9 @@
cpu0: PowerPC,e500mc@0 {
device_type = "cpu";
reg = <0>;
+ clocks = <&mux0>;
next-level-cache = <&L2_0>;
+ fsl,portid-mapping = <0x80000000>;
L2_0: l2-cache {
next-level-cache = <&cpc>;
};
@@ -89,7 +91,9 @@
cpu1: PowerPC,e500mc@1 {
device_type = "cpu";
reg = <1>;
+ clocks = <&mux1>;
next-level-cache = <&L2_1>;
+ fsl,portid-mapping = <0x40000000>;
L2_1: l2-cache {
next-level-cache = <&cpc>;
};
@@ -97,7 +101,9 @@
cpu2: PowerPC,e500mc@2 {
device_type = "cpu";
reg = <2>;
+ clocks = <&mux2>;
next-level-cache = <&L2_2>;
+ fsl,portid-mapping = <0x20000000>;
L2_2: l2-cache {
next-level-cache = <&cpc>;
};
@@ -105,7 +111,9 @@
cpu3: PowerPC,e500mc@3 {
device_type = "cpu";
reg = <3>;
+ clocks = <&mux3>;
next-level-cache = <&L2_3>;
+ fsl,portid-mapping = <0x10000000>;
L2_3: l2-cache {
next-level-cache = <&cpc>;
};
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
index 3fa1e22d544..cd63cb1b104 100644
--- a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
@@ -273,7 +273,7 @@
};
corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
+ compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
reg = <0x18000 0x1000>;
interrupts = <16 2 1 31>;
fsl,ccf-num-csdids = <32>;
@@ -289,6 +289,7 @@
interrupts = <
24 2 0 0
16 2 1 30>;
+ fsl,portid-mapping = <0x0f000000>;
pamu0: pamu@0 {
reg = <0 0x1000>;
@@ -333,8 +334,69 @@
clockgen: global-utilities@e1000 {
compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0";
+ ranges = <0x0 0xe1000 0x1000>;
reg = <0xe1000 0x1000>;
clock-frequency = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysclk: sysclk {
+ #clock-cells = <0>;
+ compatible = "fsl,qoriq-sysclk-1.0";
+ clock-output-names = "sysclk";
+ };
+
+ pll0: pll0@800 {
+ #clock-cells = <1>;
+ reg = <0x800 0x4>;
+ compatible = "fsl,qoriq-core-pll-1.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll0", "pll0-div2";
+ };
+
+ pll1: pll1@820 {
+ #clock-cells = <1>;
+ reg = <0x820 0x4>;
+ compatible = "fsl,qoriq-core-pll-1.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll1", "pll1-div2";
+ };
+
+ mux0: mux0@0 {
+ #clock-cells = <0>;
+ reg = <0x0 0x4>;
+ compatible = "fsl,qoriq-core-mux-1.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+ clock-output-names = "cmux0";
+ };
+
+ mux1: mux1@20 {
+ #clock-cells = <0>;
+ reg = <0x20 0x4>;
+ compatible = "fsl,qoriq-core-mux-1.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+ clock-output-names = "cmux1";
+ };
+
+ mux2: mux2@40 {
+ #clock-cells = <0>;
+ reg = <0x40 0x4>;
+ compatible = "fsl,qoriq-core-mux-1.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+ clock-output-names = "cmux2";
+ };
+
+ mux3: mux3@60 {
+ #clock-cells = <0>;
+ reg = <0x60 0x4>;
+ compatible = "fsl,qoriq-core-mux-1.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+ clock-output-names = "cmux3";
+ };
};
rcpm: global-utilities@e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
index c9ca2c305cf..dc5f4b362c2 100644
--- a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
@@ -82,7 +82,9 @@
cpu0: PowerPC,e500mc@0 {
device_type = "cpu";
reg = <0>;
+ clocks = <&mux0>;
next-level-cache = <&L2_0>;
+ fsl,portid-mapping = <0x80000000>;
L2_0: l2-cache {
next-level-cache = <&cpc>;
};
@@ -90,7 +92,9 @@
cpu1: PowerPC,e500mc@1 {
device_type = "cpu";
reg = <1>;
+ clocks = <&mux1>;
next-level-cache = <&L2_1>;
+ fsl,portid-mapping = <0x40000000>;
L2_1: l2-cache {
next-level-cache = <&cpc>;
};
@@ -98,7 +102,9 @@
cpu2: PowerPC,e500mc@2 {
device_type = "cpu";
reg = <2>;
+ clocks = <&mux2>;
next-level-cache = <&L2_2>;
+ fsl,portid-mapping = <0x20000000>;
L2_2: l2-cache {
next-level-cache = <&cpc>;
};
@@ -106,7 +112,9 @@
cpu3: PowerPC,e500mc@3 {
device_type = "cpu";
reg = <3>;
+ clocks = <&mux3>;
next-level-cache = <&L2_3>;
+ fsl,portid-mapping = <0x10000000>;
L2_3: l2-cache {
next-level-cache = <&cpc>;
};
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
index 34769a7eafe..12947ccddf2 100644
--- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
@@ -281,7 +281,7 @@
};
corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
+ compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
reg = <0x18000 0x1000>;
interrupts = <16 2 1 31>;
fsl,ccf-num-csdids = <32>;
@@ -297,6 +297,7 @@
interrupts = <
24 2 0 0
16 2 1 30>;
+ fsl,portid-mapping = <0x00f80000>;
pamu0: pamu@0 {
reg = <0 0x1000>;
@@ -353,8 +354,121 @@
clockgen: global-utilities@e1000 {
compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0";
+ ranges = <0x0 0xe1000 0x1000>;
reg = <0xe1000 0x1000>;
clock-frequency = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysclk: sysclk {
+ #clock-cells = <0>;
+ compatible = "fsl,qoriq-sysclk-1.0";
+ clock-output-names = "sysclk";
+ };
+
+ pll0: pll0@800 {
+ #clock-cells = <1>;
+ reg = <0x800 0x4>;
+ compatible = "fsl,qoriq-core-pll-1.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll0", "pll0-div2";
+ };
+
+ pll1: pll1@820 {
+ #clock-cells = <1>;
+ reg = <0x820 0x4>;
+ compatible = "fsl,qoriq-core-pll-1.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll1", "pll1-div2";
+ };
+
+ pll2: pll2@840 {
+ #clock-cells = <1>;
+ reg = <0x840 0x4>;
+ compatible = "fsl,qoriq-core-pll-1.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll2", "pll2-div2";
+ };
+
+ pll3: pll3@860 {
+ #clock-cells = <1>;
+ reg = <0x860 0x4>;
+ compatible = "fsl,qoriq-core-pll-1.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll3", "pll3-div2";
+ };
+
+ mux0: mux0@0 {
+ #clock-cells = <0>;
+ reg = <0x0 0x4>;
+ compatible = "fsl,qoriq-core-mux-1.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+ clock-output-names = "cmux0";
+ };
+
+ mux1: mux1@20 {
+ #clock-cells = <0>;
+ reg = <0x20 0x4>;
+ compatible = "fsl,qoriq-core-mux-1.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+ clock-output-names = "cmux1";
+ };
+
+ mux2: mux2@40 {
+ #clock-cells = <0>;
+ reg = <0x40 0x4>;
+ compatible = "fsl,qoriq-core-mux-1.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+ clock-output-names = "cmux2";
+ };
+
+ mux3: mux3@60 {
+ #clock-cells = <0>;
+ reg = <0x60 0x4>;
+ compatible = "fsl,qoriq-core-mux-1.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+ clock-output-names = "cmux3";
+ };
+
+ mux4: mux4@80 {
+ #clock-cells = <0>;
+ reg = <0x80 0x4>;
+ compatible = "fsl,qoriq-core-mux-1.0";
+ clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
+ clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
+ clock-output-names = "cmux4";
+ };
+
+ mux5: mux5@a0 {
+ #clock-cells = <0>;
+ reg = <0xa0 0x4>;
+ compatible = "fsl,qoriq-core-mux-1.0";
+ clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
+ clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
+ clock-output-names = "cmux5";
+ };
+
+ mux6: mux6@c0 {
+ #clock-cells = <0>;
+ reg = <0xc0 0x4>;
+ compatible = "fsl,qoriq-core-mux-1.0";
+ clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
+ clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
+ clock-output-names = "cmux6";
+ };
+
+ mux7: mux7@e0 {
+ #clock-cells = <0>;
+ reg = <0xe0 0x4>;
+ compatible = "fsl,qoriq-core-mux-1.0";
+ clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
+ clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
+ clock-output-names = "cmux7";
+ };
};
rcpm: global-utilities@e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
index 493d9a056b5..38bde095867 100644
--- a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
@@ -81,7 +81,9 @@
cpu0: PowerPC,e500mc@0 {
device_type = "cpu";
reg = <0>;
+ clocks = <&mux0>;
next-level-cache = <&L2_0>;
+ fsl,portid-mapping = <0x80000000>;
L2_0: l2-cache {
next-level-cache = <&cpc>;
};
@@ -89,7 +91,9 @@
cpu1: PowerPC,e500mc@1 {
device_type = "cpu";
reg = <1>;
+ clocks = <&mux1>;
next-level-cache = <&L2_1>;
+ fsl,portid-mapping = <0x40000000>;
L2_1: l2-cache {
next-level-cache = <&cpc>;
};
@@ -97,7 +101,9 @@
cpu2: PowerPC,e500mc@2 {
device_type = "cpu";
reg = <2>;
+ clocks = <&mux2>;
next-level-cache = <&L2_2>;
+ fsl,portid-mapping = <0x20000000>;
L2_2: l2-cache {
next-level-cache = <&cpc>;
};
@@ -105,7 +111,9 @@
cpu3: PowerPC,e500mc@3 {
device_type = "cpu";
reg = <3>;
+ clocks = <&mux3>;
next-level-cache = <&L2_3>;
+ fsl,portid-mapping = <0x10000000>;
L2_3: l2-cache {
next-level-cache = <&cpc>;
};
@@ -113,7 +121,9 @@
cpu4: PowerPC,e500mc@4 {
device_type = "cpu";
reg = <4>;
+ clocks = <&mux4>;
next-level-cache = <&L2_4>;
+ fsl,portid-mapping = <0x08000000>;
L2_4: l2-cache {
next-level-cache = <&cpc>;
};
@@ -121,7 +131,9 @@
cpu5: PowerPC,e500mc@5 {
device_type = "cpu";
reg = <5>;
+ clocks = <&mux5>;
next-level-cache = <&L2_5>;
+ fsl,portid-mapping = <0x04000000>;
L2_5: l2-cache {
next-level-cache = <&cpc>;
};
@@ -129,7 +141,9 @@
cpu6: PowerPC,e500mc@6 {
device_type = "cpu";
reg = <6>;
+ clocks = <&mux6>;
next-level-cache = <&L2_6>;
+ fsl,portid-mapping = <0x02000000>;
L2_6: l2-cache {
next-level-cache = <&cpc>;
};
@@ -137,7 +151,9 @@
cpu7: PowerPC,e500mc@7 {
device_type = "cpu";
reg = <7>;
+ clocks = <&mux7>;
next-level-cache = <&L2_7>;
+ fsl,portid-mapping = <0x01000000>;
L2_7: l2-cache {
next-level-cache = <&cpc>;
};
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
index bc3ae5a2252..4c4a2b0436b 100644
--- a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
@@ -278,7 +278,7 @@
};
corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
+ compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
reg = <0x18000 0x1000>;
interrupts = <16 2 1 31>;
fsl,ccf-num-csdids = <32>;
@@ -294,6 +294,7 @@
interrupts = <
24 2 0 0
16 2 1 30>;
+ fsl,portid-mapping = <0x3c000000>;
pamu0: pamu@0 {
reg = <0 0x1000>;
@@ -338,8 +339,51 @@
clockgen: global-utilities@e1000 {
compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+ ranges = <0x0 0xe1000 0x1000>;
reg = <0xe1000 0x1000>;
clock-frequency = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysclk: sysclk {
+ #clock-cells = <0>;
+ compatible = "fsl,qoriq-sysclk-1.0";
+ clock-output-names = "sysclk";
+ };
+
+ pll0: pll0@800 {
+ #clock-cells = <1>;
+ reg = <0x800 0x4>;
+ compatible = "fsl,qoriq-core-pll-1.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll0", "pll0-div2";
+ };
+
+ pll1: pll1@820 {
+ #clock-cells = <1>;
+ reg = <0x820 0x4>;
+ compatible = "fsl,qoriq-core-pll-1.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll1", "pll1-div2";
+ };
+
+ mux0: mux0@0 {
+ #clock-cells = <0>;
+ reg = <0x0 0x4>;
+ compatible = "fsl,qoriq-core-mux-1.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+ clock-output-names = "cmux0";
+ };
+
+ mux1: mux1@20 {
+ #clock-cells = <0>;
+ reg = <0x20 0x4>;
+ compatible = "fsl,qoriq-core-mux-1.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+ clock-output-names = "cmux1";
+ };
};
rcpm: global-utilities@e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
index 8df47fc45ab..1cc61e126e4 100644
--- a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
@@ -88,7 +88,9 @@
cpu0: PowerPC,e5500@0 {
device_type = "cpu";
reg = <0>;
+ clocks = <&mux0>;
next-level-cache = <&L2_0>;
+ fsl,portid-mapping = <0x80000000>;
L2_0: l2-cache {
next-level-cache = <&cpc>;
};
@@ -96,7 +98,9 @@
cpu1: PowerPC,e5500@1 {
device_type = "cpu";
reg = <1>;
+ clocks = <&mux1>;
next-level-cache = <&L2_1>;
+ fsl,portid-mapping = <0x40000000>;
L2_1: l2-cache {
next-level-cache = <&cpc>;
};
diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
index a91897f6af0..67296fdd969 100644
--- a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
@@ -233,7 +233,7 @@
};
corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
+ compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
reg = <0x18000 0x1000>;
interrupts = <16 2 1 31>;
fsl,ccf-num-csdids = <32>;
@@ -248,6 +248,7 @@
#size-cells = <1>;
interrupts = <24 2 0 0
16 2 1 30>;
+ fsl,portid-mapping = <0x0f800000>;
pamu0: pamu@0 {
reg = <0 0x1000>;
@@ -298,8 +299,69 @@
clockgen: global-utilities@e1000 {
compatible = "fsl,p5040-clockgen", "fsl,qoriq-clockgen-1.0";
+ ranges = <0x0 0xe1000 0x1000>;
reg = <0xe1000 0x1000>;
clock-frequency = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysclk: sysclk {
+ #clock-cells = <0>;
+ compatible = "fsl,qoriq-sysclk-1.0";
+ clock-output-names = "sysclk";
+ };
+
+ pll0: pll0@800 {
+ #clock-cells = <1>;
+ reg = <0x800 0x4>;
+ compatible = "fsl,qoriq-core-pll-1.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll0", "pll0-div2";
+ };
+
+ pll1: pll1@820 {
+ #clock-cells = <1>;
+ reg = <0x820 0x4>;
+ compatible = "fsl,qoriq-core-pll-1.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll1", "pll1-div2";
+ };
+
+ mux0: mux0@0 {
+ #clock-cells = <0>;
+ reg = <0x0 0x4>;
+ compatible = "fsl,qoriq-core-mux-1.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+ clock-output-names = "cmux0";
+ };
+
+ mux1: mux1@20 {
+ #clock-cells = <0>;
+ reg = <0x20 0x4>;
+ compatible = "fsl,qoriq-core-mux-1.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+ clock-output-names = "cmux1";
+ };
+
+ mux2: mux2@40 {
+ #clock-cells = <0>;
+ reg = <0x40 0x4>;
+ compatible = "fsl,qoriq-core-mux-1.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+ clock-output-names = "cmux2";
+ };
+
+ mux3: mux3@60 {
+ #clock-cells = <0>;
+ reg = <0x60 0x4>;
+ compatible = "fsl,qoriq-core-mux-1.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+ clock-output-names = "cmux3";
+ };
};
rcpm: global-utilities@e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
index 40ca943f5d1..b048a2be05a 100644
--- a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
@@ -81,7 +81,9 @@
cpu0: PowerPC,e5500@0 {
device_type = "cpu";
reg = <0>;
+ clocks = <&mux0>;
next-level-cache = <&L2_0>;
+ fsl,portid-mapping = <0x80000000>;
L2_0: l2-cache {
next-level-cache = <&cpc>;
};
@@ -89,7 +91,9 @@
cpu1: PowerPC,e5500@1 {
device_type = "cpu";
reg = <1>;
+ clocks = <&mux1>;
next-level-cache = <&L2_1>;
+ fsl,portid-mapping = <0x40000000>;
L2_1: l2-cache {
next-level-cache = <&cpc>;
};
@@ -97,7 +101,9 @@
cpu2: PowerPC,e5500@2 {
device_type = "cpu";
reg = <2>;
+ clocks = <&mux2>;
next-level-cache = <&L2_2>;
+ fsl,portid-mapping = <0x20000000>;
L2_2: l2-cache {
next-level-cache = <&cpc>;
};
@@ -105,7 +111,9 @@
cpu3: PowerPC,e5500@3 {
device_type = "cpu";
reg = <3>;
+ clocks = <&mux3>;
next-level-cache = <&L2_3>;
+ fsl,portid-mapping = <0x10000000>;
L2_3: l2-cache {
next-level-cache = <&cpc>;
};
diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
new file mode 100644
index 00000000000..12e597eea3c
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
@@ -0,0 +1,430 @@
+/*
+ * T1040 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc", "simple-bus";
+ interrupts = <25 2 0 0>;
+};
+
+&pci0 {
+ compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ interrupts = <20 2 0 0>;
+ fsl,iommu-parent = <&pamu0>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <20 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+};
+
+&pci1 {
+ compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ interrupts = <21 2 0 0>;
+ fsl,iommu-parent = <&pamu0>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <21 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+};
+
+&pci2 {
+ compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ interrupts = <22 2 0 0>;
+ fsl,iommu-parent = <&pamu0>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <22 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 42 1 0 0
+ 0000 0 0 2 &mpic 9 1 0 0
+ 0000 0 0 3 &mpic 10 1 0 0
+ 0000 0 0 4 &mpic 11 1 0 0
+ >;
+ };
+};
+
+&pci3 {
+ compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ interrupts = <23 2 0 0>;
+ fsl,iommu-parent = <&pamu0>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <23 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 43 1 0 0
+ 0000 0 0 2 &mpic 0 1 0 0
+ 0000 0 0 3 &mpic 4 1 0 0
+ 0000 0 0 4 &mpic 8 1 0 0
+ >;
+ };
+};
+
+&dcsr {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,t1040-dcsr-epu", "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,t1040-dcsr-cnpc", "fsl,dcsr-cnpc";
+ reg = <0x1000 0x1000 0x1002000 0x10000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0x1A000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,t1040-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,t1040-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,t1040-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,t1040-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-snpc@30000 {
+ compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc";
+ reg = <0x30000 0x1000 0x1022000 0x10000>;
+ };
+ dcsr-snpc@31000 {
+ compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc";
+ reg = <0x31000 0x1000 0x1042000 0x10000>;
+ };
+ dcsr-cpu-sb-proxy@100000 {
+ compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x100000 0x1000 0x101000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@108000 {
+ compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x108000 0x1000 0x109000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@110000 {
+ compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu2>;
+ reg = <0x110000 0x1000 0x111000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@118000 {
+ compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu3>;
+ reg = <0x118000 0x1000 0x119000 0x1000>;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 29>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <16>;
+ };
+
+ ddr1: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v5.0",
+ "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,t1040-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000>;
+ interrupts = <16 2 1 27>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x1000>;
+ ranges = <0 0x20000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+ pamu0: pamu@0 {
+ reg = <0 0x1000>;
+ fsl,primary-cache-geometry = <128 1>;
+ fsl,secondary-cache-geometry = <16 2>;
+ };
+ };
+
+/include/ "qoriq-mpic.dtsi"
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,t1040-device-config", "fsl,qoriq-device-config-2.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ fsl,liodn-bits = <12>;
+ };
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,t1040-clockgen", "fsl,qoriq-clockgen-2.0";
+ ranges = <0x0 0xe1000 0x1000>;
+ reg = <0xe1000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysclk: sysclk {
+ #clock-cells = <0>;
+ compatible = "fsl,qoriq-sysclk-2.0";
+ clock-output-names = "sysclk", "fixed-clock";
+ };
+
+
+ pll0: pll0@800 {
+ #clock-cells = <1>;
+ reg = <0x800 4>;
+ compatible = "fsl,qoriq-core-pll-2.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll0", "pll0-div2", "pll0-div4";
+ };
+
+ pll1: pll1@820 {
+ #clock-cells = <1>;
+ reg = <0x820 4>;
+ compatible = "fsl,qoriq-core-pll-2.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll1", "pll1-div2", "pll1-div4";
+ };
+
+ mux0: mux0@0 {
+ #clock-cells = <0>;
+ reg = <0x0 4>;
+ compatible = "fsl,qoriq-core-mux-2.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+ <&pll1 0>, <&pll1 1>, <&pll1 2>;
+ clock-names = "pll0", "pll0-div2", "pll1-div4",
+ "pll1", "pll1-div2", "pll1-div4";
+ clock-output-names = "cmux0";
+ };
+
+ mux1: mux1@20 {
+ #clock-cells = <0>;
+ reg = <0x20 4>;
+ compatible = "fsl,qoriq-core-mux-2.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+ <&pll1 0>, <&pll1 1>, <&pll1 2>;
+ clock-names = "pll0", "pll0-div2", "pll1-div4",
+ "pll1", "pll1-div2", "pll1-div4";
+ clock-output-names = "cmux1";
+ };
+
+ mux2: mux2@40 {
+ #clock-cells = <0>;
+ reg = <0x40 4>;
+ compatible = "fsl,qoriq-core-mux-2.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+ <&pll1 0>, <&pll1 1>, <&pll1 2>;
+ clock-names = "pll0", "pll0-div2", "pll1-div4",
+ "pll1", "pll1-div2", "pll1-div4";
+ clock-output-names = "cmux2";
+ };
+
+ mux3: mux3@60 {
+ #clock-cells = <0>;
+ reg = <0x60 4>;
+ compatible = "fsl,qoriq-core-mux-2.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+ <&pll1 0>, <&pll1 1>, <&pll1 2>;
+ clock-names = "pll0_0", "pll0_1", "pll0_2",
+ "pll1_0", "pll1_1", "pll1_2";
+ clock-output-names = "cmux3";
+ };
+ };
+
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,t1040-rcpm", "fsl,qoriq-rcpm-2.0";
+ reg = <0xe2000 0x1000>;
+ };
+
+ sfp: sfp@e8000 {
+ compatible = "fsl,t1040-sfp";
+ reg = <0xe8000 0x1000>;
+ };
+
+ serdes: serdes@ea000 {
+ compatible = "fsl,t1040-serdes";
+ reg = <0xea000 0x4000>;
+ };
+
+/include/ "elo3-dma-0.dtsi"
+/include/ "elo3-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+ spi@110000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "qoriq-esdhc-0.dtsi"
+ sdhc@114000 {
+ compatible = "fsl,t1040-esdhc", "fsl,esdhc";
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
+ sdhci,auto-cmd12;
+ };
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-gpio-1.dtsi"
+/include/ "qoriq-gpio-2.dtsi"
+/include/ "qoriq-gpio-3.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+ usb0: usb@210000 {
+ compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph";
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+ phy_type = "utmi";
+ port0;
+ };
+/include/ "qoriq-usb2-dr-0.dtsi"
+ usb1: usb@211000 {
+ compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr";
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+ dr_mode = "host";
+ phy_type = "utmi";
+ };
+
+ display@180000 {
+ compatible = "fsl,t1040-diu", "fsl,diu";
+ reg = <0x180000 1000>;
+ interrupts = <74 2 0 0>;
+ };
+
+/include/ "qoriq-sata2-0.dtsi"
+ sata@220000 {
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+ };
+/include/ "qoriq-sata2-1.dtsi"
+ sata@221000 {
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
+ };
+/include/ "qoriq-sec5.0-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/t1042si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1042si-post.dtsi
new file mode 100644
index 00000000000..319b74f2972
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t1042si-post.dtsi
@@ -0,0 +1,37 @@
+/*
+ * T1042 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t1040si-post.dtsi"
+
+/* Place holder for ethernet related device tree nodes */
diff --git a/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi
new file mode 100644
index 00000000000..bbb7025ca9c
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi
@@ -0,0 +1,104 @@
+/*
+ * T1040/T1042 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e5500_power_isa.dtsi"
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+ dcsr = &dcsr;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ pci3 = &pci3;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ sdhc = &sdhc;
+
+ crypto = &crypto;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e5500@0 {
+ device_type = "cpu";
+ reg = <0>;
+ clocks = <&mux0>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu1: PowerPC,e5500@1 {
+ device_type = "cpu";
+ reg = <1>;
+ clocks = <&mux1>;
+ next-level-cache = <&L2_2>;
+ L2_2: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu2: PowerPC,e5500@2 {
+ device_type = "cpu";
+ reg = <2>;
+ clocks = <&mux2>;
+ next-level-cache = <&L2_3>;
+ L2_3: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu3: PowerPC,e5500@3 {
+ device_type = "cpu";
+ reg = <3>;
+ clocks = <&mux3>;
+ next-level-cache = <&L2_4>;
+ L2_4: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
index 510afa362de..793669baa13 100644
--- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
@@ -343,7 +343,7 @@
};
corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
+ compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
reg = <0x18000 0x1000>;
interrupts = <16 2 1 31>;
fsl,ccf-num-csdids = <32>;
@@ -353,6 +353,7 @@
iommu@20000 {
compatible = "fsl,pamu-v1.0", "fsl,pamu";
reg = <0x20000 0x6000>;
+ fsl,portid-mapping = <0x8000>;
interrupts = <
24 2 0 0
16 2 1 30>;
@@ -369,7 +370,93 @@
clockgen: global-utilities@e1000 {
compatible = "fsl,t4240-clockgen", "fsl,qoriq-clockgen-2.0";
+ ranges = <0x0 0xe1000 0x1000>;
reg = <0xe1000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysclk: sysclk {
+ #clock-cells = <0>;
+ compatible = "fsl,qoriq-sysclk-2.0";
+ clock-output-names = "sysclk";
+ };
+
+ pll0: pll0@800 {
+ #clock-cells = <1>;
+ reg = <0x800 0x4>;
+ compatible = "fsl,qoriq-core-pll-2.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll0", "pll0-div2", "pll0-div4";
+ };
+
+ pll1: pll1@820 {
+ #clock-cells = <1>;
+ reg = <0x820 0x4>;
+ compatible = "fsl,qoriq-core-pll-2.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll1", "pll1-div2", "pll1-div4";
+ };
+
+ pll2: pll2@840 {
+ #clock-cells = <1>;
+ reg = <0x840 0x4>;
+ compatible = "fsl,qoriq-core-pll-2.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll2", "pll2-div2", "pll2-div4";
+ };
+
+ pll3: pll3@860 {
+ #clock-cells = <1>;
+ reg = <0x860 0x4>;
+ compatible = "fsl,qoriq-core-pll-2.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll3", "pll3-div2", "pll3-div4";
+ };
+
+ pll4: pll4@880 {
+ #clock-cells = <1>;
+ reg = <0x880 0x4>;
+ compatible = "fsl,qoriq-core-pll-2.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll4", "pll4-div2", "pll4-div4";
+ };
+
+ mux0: mux0@0 {
+ #clock-cells = <0>;
+ reg = <0x0 0x4>;
+ compatible = "fsl,qoriq-core-mux-2.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+ <&pll1 0>, <&pll1 1>, <&pll1 2>,
+ <&pll2 0>, <&pll2 1>, <&pll2 2>;
+ clock-names = "pll0", "pll0-div2", "pll0-div4",
+ "pll1", "pll1-div2", "pll1-div4",
+ "pll2", "pll2-div2", "pll2-div4";
+ clock-output-names = "cmux0";
+ };
+
+ mux1: mux1@20 {
+ #clock-cells = <0>;
+ reg = <0x20 0x4>;
+ compatible = "fsl,qoriq-core-mux-2.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+ <&pll1 0>, <&pll1 1>, <&pll1 2>,
+ <&pll2 0>, <&pll2 1>, <&pll2 2>;
+ clock-names = "pll0", "pll0-div2", "pll0-div4",
+ "pll1", "pll1-div2", "pll1-div4",
+ "pll2", "pll2-div2", "pll2-div4";
+ clock-output-names = "cmux1";
+ };
+
+ mux2: mux2@40 {
+ #clock-cells = <0>;
+ reg = <0x40 0x4>;
+ compatible = "fsl,qoriq-core-mux-2.0";
+ clocks = <&pll3 0>, <&pll3 1>, <&pll3 2>,
+ <&pll4 0>, <&pll4 1>, <&pll4 2>;
+ clock-names = "pll3", "pll3-div2", "pll3-div4",
+ "pll4", "pll4-div2", "pll4-div4";
+ clock-output-names = "cmux2";
+ };
};
rcpm: global-utilities@e2000 {
@@ -387,8 +474,8 @@
reg = <0xea000 0x4000>;
};
-/include/ "qoriq-dma-0.dtsi"
-/include/ "qoriq-dma-1.dtsi"
+/include/ "elo3-dma-0.dtsi"
+/include/ "elo3-dma-1.dtsi"
/include/ "qoriq-espi-0.dtsi"
spi@110000 {
diff --git a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
index a93c55a8856..d2f157edbe8 100644
--- a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
@@ -67,62 +67,86 @@
cpu0: PowerPC,e6500@0 {
device_type = "cpu";
reg = <0 1>;
+ clocks = <&mux0>;
next-level-cache = <&L2_1>;
+ fsl,portid-mapping = <0x80000000>;
};
cpu1: PowerPC,e6500@2 {
device_type = "cpu";
reg = <2 3>;
+ clocks = <&mux0>;
next-level-cache = <&L2_1>;
+ fsl,portid-mapping = <0x80000000>;
};
cpu2: PowerPC,e6500@4 {
device_type = "cpu";
reg = <4 5>;
+ clocks = <&mux0>;
next-level-cache = <&L2_1>;
+ fsl,portid-mapping = <0x80000000>;
};
cpu3: PowerPC,e6500@6 {
device_type = "cpu";
reg = <6 7>;
+ clocks = <&mux0>;
next-level-cache = <&L2_1>;
+ fsl,portid-mapping = <0x80000000>;
};
cpu4: PowerPC,e6500@8 {
device_type = "cpu";
reg = <8 9>;
+ clocks = <&mux1>;
next-level-cache = <&L2_2>;
+ fsl,portid-mapping = <0x40000000>;
};
cpu5: PowerPC,e6500@10 {
device_type = "cpu";
reg = <10 11>;
+ clocks = <&mux1>;
next-level-cache = <&L2_2>;
+ fsl,portid-mapping = <0x40000000>;
};
cpu6: PowerPC,e6500@12 {
device_type = "cpu";
reg = <12 13>;
+ clocks = <&mux1>;
next-level-cache = <&L2_2>;
+ fsl,portid-mapping = <0x40000000>;
};
cpu7: PowerPC,e6500@14 {
device_type = "cpu";
reg = <14 15>;
+ clocks = <&mux1>;
next-level-cache = <&L2_2>;
+ fsl,portid-mapping = <0x40000000>;
};
cpu8: PowerPC,e6500@16 {
device_type = "cpu";
reg = <16 17>;
+ clocks = <&mux2>;
next-level-cache = <&L2_3>;
+ fsl,portid-mapping = <0x20000000>;
};
cpu9: PowerPC,e6500@18 {
device_type = "cpu";
reg = <18 19>;
+ clocks = <&mux2>;
next-level-cache = <&L2_3>;
+ fsl,portid-mapping = <0x20000000>;
};
cpu10: PowerPC,e6500@20 {
device_type = "cpu";
reg = <20 21>;
+ clocks = <&mux2>;
next-level-cache = <&L2_3>;
+ fsl,portid-mapping = <0x20000000>;
};
cpu11: PowerPC,e6500@22 {
device_type = "cpu";
reg = <22 23>;
+ clocks = <&mux2>;
next-level-cache = <&L2_3>;
+ fsl,portid-mapping = <0x20000000>;
};
};
};
diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts
index 38dcb96c8e2..83eb0fda266 100644
--- a/arch/powerpc/boot/dts/gef_ppc9a.dts
+++ b/arch/powerpc/boot/dts/gef_ppc9a.dts
@@ -292,13 +292,11 @@
interrupt-parent = <&gef_pic>;
interrupts = <0x9 0x4>;
reg = <1>;
- device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&gef_pic>;
interrupts = <0x8 0x4>;
reg = <3>;
- device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts
index 5ab8932d09b..d426dd3de9e 100644
--- a/arch/powerpc/boot/dts/gef_sbc310.dts
+++ b/arch/powerpc/boot/dts/gef_sbc310.dts
@@ -290,13 +290,11 @@
interrupt-parent = <&gef_pic>;
interrupts = <0x9 0x4>;
reg = <1>;
- device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&gef_pic>;
interrupts = <0x8 0x4>;
reg = <3>;
- device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts
index d5341f5741a..5db3399b76b 100644
--- a/arch/powerpc/boot/dts/gef_sbc610.dts
+++ b/arch/powerpc/boot/dts/gef_sbc610.dts
@@ -290,13 +290,11 @@
interrupt-parent = <&gef_pic>;
interrupts = <0x9 0x4>;
reg = <1>;
- device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&gef_pic>;
interrupts = <0x8 0x4>;
reg = <3>;
- device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
diff --git a/arch/powerpc/boot/dts/holly.dts b/arch/powerpc/boot/dts/holly.dts
index c6e11ebeceb..43e6f0c8e44 100644
--- a/arch/powerpc/boot/dts/holly.dts
+++ b/arch/powerpc/boot/dts/holly.dts
@@ -58,7 +58,6 @@
};
MDIO: mdio@6000 {
- device_type = "mdio";
compatible = "tsi109-mdio", "tsi108-mdio";
reg = <0x00006000 0x00000050>;
#address-cells = <1>;
diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts
index 1613d6e4049..5ba7f01e2a2 100644
--- a/arch/powerpc/boot/dts/kilauea.dts
+++ b/arch/powerpc/boot/dts/kilauea.dts
@@ -406,7 +406,7 @@
MSI: ppc4xx-msi@C10000000 {
compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
- reg = < 0x0 0xEF620000 0x100>;
+ reg = <0xEF620000 0x100>;
sdr-base = <0x4B0>;
msi-data = <0x00000000>;
msi-mask = <0x44440000>;
diff --git a/arch/powerpc/boot/dts/kmcoge4.dts b/arch/powerpc/boot/dts/kmcoge4.dts
new file mode 100644
index 00000000000..89b4119f3b1
--- /dev/null
+++ b/arch/powerpc/boot/dts/kmcoge4.dts
@@ -0,0 +1,152 @@
+/*
+ * Keymile kmcoge4 Device Tree Source, based on the P2041RDB DTS
+ *
+ * (C) Copyright 2014
+ * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/p2041si-pre.dtsi"
+
+/ {
+ model = "keymile,kmcoge4";
+ compatible = "keymile,kmcoge4", "keymile,kmp204x";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ memory {
+ device_type = "memory";
+ };
+
+ dcsr: dcsr@f00000000 {
+ ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+ };
+
+ soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
+ spi@110000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25fl256s1";
+ reg = <0>;
+ spi-max-frequency = <20000000>; /* input clock */
+ };
+
+ network_clock@1 {
+ compatible = "zarlink,zl30343";
+ reg = <1>;
+ spi-max-frequency = <8000000>;
+ };
+
+ flash@2 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,m25p32";
+ reg = <2>;
+ spi-max-frequency = <15000000>;
+ };
+ };
+
+ i2c@119000 {
+ status = "disabled";
+ };
+
+ i2c@119100 {
+ status = "disabled";
+ };
+
+ usb0: usb@210000 {
+ status = "disabled";
+ };
+
+ usb1: usb@211000 {
+ status = "disabled";
+ };
+
+ sata@220000 {
+ status = "disabled";
+ };
+
+ sata@221000 {
+ status = "disabled";
+ };
+ };
+
+ rio: rapidio@ffe0c0000 {
+ status = "disabled";
+ };
+
+ lbc: localbus@ffe124000 {
+ reg = <0xf 0xfe124000 0 0x1000>;
+ ranges = <0 0 0xf 0xffa00000 0x00040000 /* LB 0 */
+ 1 0 0xf 0xfb000000 0x00010000 /* LB 1 */
+ 2 0 0xf 0xd0000000 0x10000000 /* LB 2 */
+ 3 0 0xf 0xe0000000 0x10000000>; /* LB 3 */
+
+ nand@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,elbc-fcm-nand";
+ reg = <0 0 0x40000>;
+ };
+
+ board-control@1,0 {
+ compatible = "keymile,qriox";
+ reg = <1 0 0x80>;
+ };
+
+ chassis-mgmt@3,0 {
+ compatible = "keymile,bfticu";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <3 0 0x100>;
+ interrupt-parent = <&mpic>;
+ interrupts = <6 1 0 0>;
+ };
+ };
+
+ pci0: pcie@ffe200000 {
+ reg = <0xf 0xfe200000 0 0x1000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+ 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x20000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+ pci1: pcie@ffe201000 {
+ status = "disabled";
+ };
+
+ pci2: pcie@ffe202000 {
+ reg = <0xf 0xfe202000 0 0x1000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000
+ 0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x20000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+};
+
+/include/ "fsl/p2041si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts
index 296c572ea60..5d68236e7c3 100644
--- a/arch/powerpc/boot/dts/ksi8560.dts
+++ b/arch/powerpc/boot/dts/ksi8560.dts
@@ -161,13 +161,11 @@
PHY1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
reg = <0x1>;
- device_type = "ethernet-phy";
};
PHY2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
reg = <0x2>;
- device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
@@ -284,7 +282,6 @@
PHY0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
reg = <0x0>;
- device_type = "ethernet-phy";
};
};
diff --git a/arch/powerpc/boot/dts/mpc5121.dtsi b/arch/powerpc/boot/dts/mpc5121.dtsi
index bd14c00e514..2c0e1552d20 100644
--- a/arch/powerpc/boot/dts/mpc5121.dtsi
+++ b/arch/powerpc/boot/dts/mpc5121.dtsi
@@ -9,6 +9,8 @@
* option) any later version.
*/
+#include <dt-bindings/clock/mpc512x-clock.h>
+
/dts-v1/;
/ {
@@ -49,6 +51,10 @@
compatible = "fsl,mpc5121-mbx";
reg = <0x20000000 0x4000>;
interrupts = <66 0x8>;
+ clocks = <&clks MPC512x_CLK_MBX_BUS>,
+ <&clks MPC512x_CLK_MBX_3D>,
+ <&clks MPC512x_CLK_MBX>;
+ clock-names = "mbx-bus", "mbx-3d", "mbx";
};
sram@30000000 {
@@ -62,6 +68,8 @@
interrupts = <6 8>;
#address-cells = <1>;
#size-cells = <1>;
+ clocks = <&clks MPC512x_CLK_NFC>;
+ clock-names = "ipg";
};
localbus@80000020 {
@@ -73,11 +81,21 @@
ranges = <0x0 0x0 0xfc000000 0x04000000>;
};
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ osc: osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <33000000>;
+ };
+ };
+
soc@80000000 {
compatible = "fsl,mpc5121-immr";
#address-cells = <1>;
#size-cells = <1>;
- #interrupt-cells = <2>;
ranges = <0x0 0x80000000 0x400000>;
reg = <0x80000000 0x400000>;
bus-frequency = <66000000>; /* 66 MHz ips bus */
@@ -118,9 +136,12 @@
};
/* Clock control */
- clock@f00 {
+ clks: clock@f00 {
compatible = "fsl,mpc5121-clock";
reg = <0xf00 0x100>;
+ #clock-cells = <1>;
+ clocks = <&osc>;
+ clock-names = "osc";
};
/* Power Management Controller */
@@ -140,12 +161,24 @@
compatible = "fsl,mpc5121-mscan";
reg = <0x1300 0x80>;
interrupts = <12 0x8>;
+ clocks = <&clks MPC512x_CLK_BDLC>,
+ <&clks MPC512x_CLK_IPS>,
+ <&clks MPC512x_CLK_SYS>,
+ <&clks MPC512x_CLK_REF>,
+ <&clks MPC512x_CLK_MSCAN0_MCLK>;
+ clock-names = "ipg", "ips", "sys", "ref", "mclk";
};
can@1380 {
compatible = "fsl,mpc5121-mscan";
reg = <0x1380 0x80>;
interrupts = <13 0x8>;
+ clocks = <&clks MPC512x_CLK_BDLC>,
+ <&clks MPC512x_CLK_IPS>,
+ <&clks MPC512x_CLK_SYS>,
+ <&clks MPC512x_CLK_REF>,
+ <&clks MPC512x_CLK_MSCAN1_MCLK>;
+ clock-names = "ipg", "ips", "sys", "ref", "mclk";
};
sdhc@1500 {
@@ -154,6 +187,9 @@
interrupts = <8 0x8>;
dmas = <&dma0 30>;
dma-names = "rx-tx";
+ clocks = <&clks MPC512x_CLK_IPS>,
+ <&clks MPC512x_CLK_SDHC>;
+ clock-names = "ipg", "per";
};
i2c@1700 {
@@ -162,6 +198,8 @@
compatible = "fsl,mpc5121-i2c", "fsl-i2c";
reg = <0x1700 0x20>;
interrupts = <9 0x8>;
+ clocks = <&clks MPC512x_CLK_I2C>;
+ clock-names = "ipg";
};
i2c@1720 {
@@ -170,6 +208,8 @@
compatible = "fsl,mpc5121-i2c", "fsl-i2c";
reg = <0x1720 0x20>;
interrupts = <10 0x8>;
+ clocks = <&clks MPC512x_CLK_I2C>;
+ clock-names = "ipg";
};
i2c@1740 {
@@ -178,6 +218,8 @@
compatible = "fsl,mpc5121-i2c", "fsl-i2c";
reg = <0x1740 0x20>;
interrupts = <11 0x8>;
+ clocks = <&clks MPC512x_CLK_I2C>;
+ clock-names = "ipg";
};
i2ccontrol@1760 {
@@ -189,30 +231,48 @@
compatible = "fsl,mpc5121-axe";
reg = <0x2000 0x100>;
interrupts = <42 0x8>;
+ clocks = <&clks MPC512x_CLK_AXE>;
+ clock-names = "ipg";
};
display@2100 {
compatible = "fsl,mpc5121-diu";
reg = <0x2100 0x100>;
interrupts = <64 0x8>;
+ clocks = <&clks MPC512x_CLK_DIU>;
+ clock-names = "ipg";
};
can@2300 {
compatible = "fsl,mpc5121-mscan";
reg = <0x2300 0x80>;
interrupts = <90 0x8>;
+ clocks = <&clks MPC512x_CLK_BDLC>,
+ <&clks MPC512x_CLK_IPS>,
+ <&clks MPC512x_CLK_SYS>,
+ <&clks MPC512x_CLK_REF>,
+ <&clks MPC512x_CLK_MSCAN2_MCLK>;
+ clock-names = "ipg", "ips", "sys", "ref", "mclk";
};
can@2380 {
compatible = "fsl,mpc5121-mscan";
reg = <0x2380 0x80>;
interrupts = <91 0x8>;
+ clocks = <&clks MPC512x_CLK_BDLC>,
+ <&clks MPC512x_CLK_IPS>,
+ <&clks MPC512x_CLK_SYS>,
+ <&clks MPC512x_CLK_REF>,
+ <&clks MPC512x_CLK_MSCAN3_MCLK>;
+ clock-names = "ipg", "ips", "sys", "ref", "mclk";
};
viu@2400 {
compatible = "fsl,mpc5121-viu";
reg = <0x2400 0x400>;
interrupts = <67 0x8>;
+ clocks = <&clks MPC512x_CLK_VIU>;
+ clock-names = "ipg";
};
mdio@2800 {
@@ -220,6 +280,8 @@
reg = <0x2800 0x800>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clks MPC512x_CLK_FEC>;
+ clock-names = "per";
};
eth0: ethernet@2800 {
@@ -228,6 +290,8 @@
reg = <0x2800 0x800>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <4 0x8>;
+ clocks = <&clks MPC512x_CLK_FEC>;
+ clock-names = "per";
};
/* USB1 using external ULPI PHY */
@@ -239,6 +303,8 @@
interrupts = <43 0x8>;
dr_mode = "otg";
phy_type = "ulpi";
+ clocks = <&clks MPC512x_CLK_USB1>;
+ clock-names = "ipg";
};
/* USB0 using internal UTMI PHY */
@@ -250,6 +316,8 @@
interrupts = <44 0x8>;
dr_mode = "otg";
phy_type = "utmi_wide";
+ clocks = <&clks MPC512x_CLK_USB2>;
+ clock-names = "ipg";
};
/* IO control */
@@ -268,6 +336,8 @@
compatible = "fsl,mpc5121-pata";
reg = <0x10200 0x100>;
interrupts = <5 0x8>;
+ clocks = <&clks MPC512x_CLK_PATA>;
+ clock-names = "ipg";
};
/* 512x PSCs are not 52xx PSC compatible */
@@ -279,6 +349,9 @@
interrupts = <40 0x8>;
fsl,rx-fifo-size = <16>;
fsl,tx-fifo-size = <16>;
+ clocks = <&clks MPC512x_CLK_PSC0>,
+ <&clks MPC512x_CLK_PSC0_MCLK>;
+ clock-names = "ipg", "mclk";
};
/* PSC1 */
@@ -288,6 +361,9 @@
interrupts = <40 0x8>;
fsl,rx-fifo-size = <16>;
fsl,tx-fifo-size = <16>;
+ clocks = <&clks MPC512x_CLK_PSC1>,
+ <&clks MPC512x_CLK_PSC1_MCLK>;
+ clock-names = "ipg", "mclk";
};
/* PSC2 */
@@ -297,6 +373,9 @@
interrupts = <40 0x8>;
fsl,rx-fifo-size = <16>;
fsl,tx-fifo-size = <16>;
+ clocks = <&clks MPC512x_CLK_PSC2>,
+ <&clks MPC512x_CLK_PSC2_MCLK>;
+ clock-names = "ipg", "mclk";
};
/* PSC3 */
@@ -306,6 +385,9 @@
interrupts = <40 0x8>;
fsl,rx-fifo-size = <16>;
fsl,tx-fifo-size = <16>;
+ clocks = <&clks MPC512x_CLK_PSC3>,
+ <&clks MPC512x_CLK_PSC3_MCLK>;
+ clock-names = "ipg", "mclk";
};
/* PSC4 */
@@ -315,6 +397,9 @@
interrupts = <40 0x8>;
fsl,rx-fifo-size = <16>;
fsl,tx-fifo-size = <16>;
+ clocks = <&clks MPC512x_CLK_PSC4>,
+ <&clks MPC512x_CLK_PSC4_MCLK>;
+ clock-names = "ipg", "mclk";
};
/* PSC5 */
@@ -324,6 +409,9 @@
interrupts = <40 0x8>;
fsl,rx-fifo-size = <16>;
fsl,tx-fifo-size = <16>;
+ clocks = <&clks MPC512x_CLK_PSC5>,
+ <&clks MPC512x_CLK_PSC5_MCLK>;
+ clock-names = "ipg", "mclk";
};
/* PSC6 */
@@ -333,6 +421,9 @@
interrupts = <40 0x8>;
fsl,rx-fifo-size = <16>;
fsl,tx-fifo-size = <16>;
+ clocks = <&clks MPC512x_CLK_PSC6>,
+ <&clks MPC512x_CLK_PSC6_MCLK>;
+ clock-names = "ipg", "mclk";
};
/* PSC7 */
@@ -342,6 +433,9 @@
interrupts = <40 0x8>;
fsl,rx-fifo-size = <16>;
fsl,tx-fifo-size = <16>;
+ clocks = <&clks MPC512x_CLK_PSC7>,
+ <&clks MPC512x_CLK_PSC7_MCLK>;
+ clock-names = "ipg", "mclk";
};
/* PSC8 */
@@ -351,6 +445,9 @@
interrupts = <40 0x8>;
fsl,rx-fifo-size = <16>;
fsl,tx-fifo-size = <16>;
+ clocks = <&clks MPC512x_CLK_PSC8>,
+ <&clks MPC512x_CLK_PSC8_MCLK>;
+ clock-names = "ipg", "mclk";
};
/* PSC9 */
@@ -360,6 +457,9 @@
interrupts = <40 0x8>;
fsl,rx-fifo-size = <16>;
fsl,tx-fifo-size = <16>;
+ clocks = <&clks MPC512x_CLK_PSC9>,
+ <&clks MPC512x_CLK_PSC9_MCLK>;
+ clock-names = "ipg", "mclk";
};
/* PSC10 */
@@ -369,6 +469,9 @@
interrupts = <40 0x8>;
fsl,rx-fifo-size = <16>;
fsl,tx-fifo-size = <16>;
+ clocks = <&clks MPC512x_CLK_PSC10>,
+ <&clks MPC512x_CLK_PSC10_MCLK>;
+ clock-names = "ipg", "mclk";
};
/* PSC11 */
@@ -378,12 +481,17 @@
interrupts = <40 0x8>;
fsl,rx-fifo-size = <16>;
fsl,tx-fifo-size = <16>;
+ clocks = <&clks MPC512x_CLK_PSC11>,
+ <&clks MPC512x_CLK_PSC11_MCLK>;
+ clock-names = "ipg", "mclk";
};
pscfifo@11f00 {
compatible = "fsl,mpc5121-psc-fifo";
reg = <0x11f00 0x100>;
interrupts = <40 0x8>;
+ clocks = <&clks MPC512x_CLK_PSC_FIFO>;
+ clock-names = "ipg";
};
dma0: dma@14000 {
@@ -401,6 +509,8 @@
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
+ clocks = <&clks MPC512x_CLK_PCI>;
+ clock-names = "ipg";
reg = <0x80008500 0x100 /* internal registers */
0x80008300 0x8>; /* config space access registers */
diff --git a/arch/powerpc/boot/dts/mpc5125twr.dts b/arch/powerpc/boot/dts/mpc5125twr.dts
index 4177b62240c..e4f29747174 100644
--- a/arch/powerpc/boot/dts/mpc5125twr.dts
+++ b/arch/powerpc/boot/dts/mpc5125twr.dts
@@ -12,6 +12,8 @@
* option) any later version.
*/
+#include <dt-bindings/clock/mpc512x-clock.h>
+
/dts-v1/;
/ {
@@ -54,11 +56,21 @@
reg = <0x30000000 0x08000>; // 32K at 0x30000000
};
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ osc: osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <33000000>;
+ };
+ };
+
soc@80000000 {
compatible = "fsl,mpc5121-immr";
#address-cells = <1>;
#size-cells = <1>;
- #interrupt-cells = <2>;
ranges = <0x0 0x80000000 0x400000>;
reg = <0x80000000 0x400000>;
bus-frequency = <66000000>; // 66 MHz ips bus
@@ -88,9 +100,12 @@
reg = <0xe00 0x100>;
};
- clock@f00 { // Clock control
+ clks: clock@f00 { // Clock control
compatible = "fsl,mpc5121-clock";
reg = <0xf00 0x100>;
+ #clock-cells = <1>;
+ clocks = <&osc>;
+ clock-names = "osc";
};
pmc@1000{ // Power Management Controller
@@ -115,18 +130,33 @@
compatible = "fsl,mpc5121-mscan";
interrupts = <12 0x8>;
reg = <0x1300 0x80>;
+ clocks = <&clks MPC512x_CLK_BDLC>,
+ <&clks MPC512x_CLK_IPS>,
+ <&clks MPC512x_CLK_SYS>,
+ <&clks MPC512x_CLK_REF>,
+ <&clks MPC512x_CLK_MSCAN0_MCLK>;
+ clock-names = "ipg", "ips", "sys", "ref", "mclk";
};
can@1380 {
compatible = "fsl,mpc5121-mscan";
interrupts = <13 0x8>;
reg = <0x1380 0x80>;
+ clocks = <&clks MPC512x_CLK_BDLC>,
+ <&clks MPC512x_CLK_IPS>,
+ <&clks MPC512x_CLK_SYS>,
+ <&clks MPC512x_CLK_REF>,
+ <&clks MPC512x_CLK_MSCAN1_MCLK>;
+ clock-names = "ipg", "ips", "sys", "ref", "mclk";
};
sdhc@1500 {
compatible = "fsl,mpc5121-sdhc";
interrupts = <8 0x8>;
reg = <0x1500 0x100>;
+ clocks = <&clks MPC512x_CLK_IPS>,
+ <&clks MPC512x_CLK_SDHC>;
+ clock-names = "ipg", "per";
};
i2c@1700 {
@@ -135,6 +165,8 @@
compatible = "fsl,mpc5121-i2c", "fsl-i2c";
reg = <0x1700 0x20>;
interrupts = <0x9 0x8>;
+ clocks = <&clks MPC512x_CLK_I2C>;
+ clock-names = "ipg";
};
i2c@1720 {
@@ -143,6 +175,8 @@
compatible = "fsl,mpc5121-i2c", "fsl-i2c";
reg = <0x1720 0x20>;
interrupts = <0xa 0x8>;
+ clocks = <&clks MPC512x_CLK_I2C>;
+ clock-names = "ipg";
};
i2c@1740 {
@@ -151,6 +185,8 @@
compatible = "fsl,mpc5121-i2c", "fsl-i2c";
reg = <0x1740 0x20>;
interrupts = <0xb 0x8>;
+ clocks = <&clks MPC512x_CLK_I2C>;
+ clock-names = "ipg";
};
i2ccontrol@1760 {
@@ -162,6 +198,8 @@
compatible = "fsl,mpc5121-diu";
reg = <0x2100 0x100>;
interrupts = <64 0x8>;
+ clocks = <&clks MPC512x_CLK_DIU>;
+ clock-names = "ipg";
};
mdio@2800 {
@@ -181,6 +219,8 @@
interrupts = <4 0x8>;
phy-handle = < &phy0 >;
phy-connection-type = "rmii";
+ clocks = <&clks MPC512x_CLK_FEC>;
+ clock-names = "per";
};
// IO control
@@ -189,6 +229,10 @@
reg = <0xA000 0x1000>;
};
+ // disable USB1 port
+ // TODO:
+ // correct pinmux config and fix USB3320 ulpi dependency
+ // before re-enabling it
usb@3000 {
compatible = "fsl,mpc5121-usb2-dr";
reg = <0x3000 0x400>;
@@ -197,6 +241,9 @@
interrupts = <43 0x8>;
dr_mode = "host";
phy_type = "ulpi";
+ clocks = <&clks MPC512x_CLK_USB1>;
+ clock-names = "ipg";
+ status = "disabled";
};
// 5125 PSCs are not 52xx or 5121 PSC compatible
@@ -207,6 +254,9 @@
interrupts = <40 0x8>;
fsl,rx-fifo-size = <16>;
fsl,tx-fifo-size = <16>;
+ clocks = <&clks MPC512x_CLK_PSC1>,
+ <&clks MPC512x_CLK_PSC1_MCLK>;
+ clock-names = "ipg", "mclk";
};
// PSC9 uart1 aka ttyPSC1
@@ -216,12 +266,17 @@
interrupts = <40 0x8>;
fsl,rx-fifo-size = <16>;
fsl,tx-fifo-size = <16>;
+ clocks = <&clks MPC512x_CLK_PSC9>,
+ <&clks MPC512x_CLK_PSC9_MCLK>;
+ clock-names = "ipg", "mclk";
};
pscfifo@11f00 {
compatible = "fsl,mpc5121-psc-fifo";
reg = <0x11f00 0x100>;
interrupts = <40 0x8>;
+ clocks = <&clks MPC512x_CLK_PSC_FIFO>;
+ clock-names = "ipg";
};
dma@14000 {
diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts
index 2544f3ecd6e..20a0d22df47 100644
--- a/arch/powerpc/boot/dts/mpc7448hpc2.dts
+++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts
@@ -68,7 +68,6 @@
};
MDIO: mdio@6000 {
- device_type = "mdio";
compatible = "tsi108-mdio";
reg = <0x6000 0x50>;
#address-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts
index e802ebd88cb..6d2cddf64cf 100644
--- a/arch/powerpc/boot/dts/mpc8272ads.dts
+++ b/arch/powerpc/boot/dts/mpc8272ads.dts
@@ -182,7 +182,6 @@
};
mdio@10d40 {
- device_type = "mdio";
compatible = "fsl,mpc8272ads-mdio-bitbang",
"fsl,mpc8272-mdio-bitbang",
"fsl,cpm2-mdio-bitbang";
@@ -196,14 +195,12 @@
interrupt-parent = <&PIC>;
interrupts = <23 8>;
reg = <0x0>;
- device_type = "ethernet-phy";
};
PHY1: ethernet-phy@1 {
interrupt-parent = <&PIC>;
interrupts = <23 8>;
reg = <0x3>;
- device_type = "ethernet-phy";
};
};
diff --git a/arch/powerpc/boot/dts/mpc8308_p1m.dts b/arch/powerpc/boot/dts/mpc8308_p1m.dts
index 22b0832b6c3..57f86cdf9f3 100644
--- a/arch/powerpc/boot/dts/mpc8308_p1m.dts
+++ b/arch/powerpc/boot/dts/mpc8308_p1m.dts
@@ -189,13 +189,11 @@
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x1>;
- device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&ipic>;
interrupts = <19 0x8>;
reg = <0x2>;
- device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
@@ -298,7 +296,7 @@
};
dma@2c000 {
- compatible = "fsl,mpc8308-dma", "fsl,mpc5121-dma";
+ compatible = "fsl,mpc8308-dma";
reg = <0x2c000 0x1800>;
interrupts = <3 0x8
94 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8308rdb.dts b/arch/powerpc/boot/dts/mpc8308rdb.dts
index f66d10d95a8..d0211f0413c 100644
--- a/arch/powerpc/boot/dts/mpc8308rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8308rdb.dts
@@ -166,7 +166,6 @@
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
- device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
@@ -266,7 +265,7 @@
};
dma@2c000 {
- compatible = "fsl,mpc8308-dma", "fsl,mpc5121-dma";
+ compatible = "fsl,mpc8308-dma";
reg = <0x2c000 0x1800>;
interrupts = <3 0x8
94 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
index 1c836c6c5be..4b635dc4ecd 100644
--- a/arch/powerpc/boot/dts/mpc8313erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
@@ -217,7 +217,6 @@
interrupt-parent = <&ipic>;
interrupts = <20 0x8>;
reg = <0x4>;
- device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts
index 811848e93ae..43546844ea5 100644
--- a/arch/powerpc/boot/dts/mpc8315erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8315erdb.dts
@@ -216,14 +216,12 @@
interrupt-parent = <&ipic>;
interrupts = <20 0x8>;
reg = <0x0>;
- device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&ipic>;
interrupts = <19 0x8>;
reg = <0x1>;
- device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index da9c72ddc34..0793cdf0d46 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -356,13 +356,11 @@
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x3>;
- device_type = "ethernet-phy";
};
phy4: ethernet-phy@04 {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x4>;
- device_type = "ethernet-phy";
};
};
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index ff7b15b340a..91df1eb1666 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -314,13 +314,11 @@
interrupt-parent = <&ipic>;
interrupts = <0>;
reg = <0x0>;
- device_type = "ethernet-phy";
};
phy04:ethernet-phy@04 {
interrupt-parent = <&ipic>;
interrupts = <0>;
reg = <0x4>;
- device_type = "ethernet-phy";
};
};
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 2608679d0d4..cf8542401a3 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -240,7 +240,6 @@
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x1c>;
- device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index 6cd044d8fb8..f00066dcc8d 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -176,7 +176,6 @@
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x1c>;
- device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index 4552864082c..4843c3ff716 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -193,14 +193,12 @@
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x0>;
- device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x1>;
- device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 81dd513d630..ecb6ccd3a6a 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -397,13 +397,11 @@
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x0>;
- device_type = "ethernet-phy";
};
phy1: ethernet-phy@01 {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x1>;
- device_type = "ethernet-phy";
};
tbi-phy@2 {
device_type = "tbi-phy";
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
index b6e9aec1d86..daeacbdcf8b 100644
--- a/arch/powerpc/boot/dts/mpc836x_rdk.dts
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -332,25 +332,21 @@
reg = <0x2120 0x18>;
phy1: ethernet-phy@1 {
- device_type = "ethernet-phy";
compatible = "national,DP83848VV";
reg = <1>;
};
phy2: ethernet-phy@2 {
- device_type = "ethernet-phy";
compatible = "broadcom,BCM5481UA2KMLG";
reg = <2>;
};
phy3: ethernet-phy@3 {
- device_type = "ethernet-phy";
compatible = "national,DP83848VV";
reg = <3>;
};
phy4: ethernet-phy@4 {
- device_type = "ethernet-phy";
compatible = "broadcom,BCM5481UA2KMLG";
reg = <4>;
};
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index cfccef57cd1..c2c062e8175 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -225,14 +225,12 @@
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
- device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x3>;
- device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 353deff1b7f..2b4b6532d69 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -277,7 +277,6 @@
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
- device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
diff --git a/arch/powerpc/boot/dts/mpc8377_wlan.dts b/arch/powerpc/boot/dts/mpc8377_wlan.dts
index ef4a305a0d0..c0c790168b9 100644
--- a/arch/powerpc/boot/dts/mpc8377_wlan.dts
+++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts
@@ -253,14 +253,12 @@
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
- device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x3>;
- device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
index 538fcb92733..1b82b77f941 100644
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -264,14 +264,12 @@
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
- device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x3>;
- device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 32333a908f3..74b6a535a41 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -277,7 +277,6 @@
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
- device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index 5387092fdfb..38e5048d65d 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -262,14 +262,12 @@
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
- device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x3>;
- device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index 46224c2430f..3b5cbac8536 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -275,7 +275,6 @@
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
- device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dtsi b/arch/powerpc/boot/dts/mpc8536ds.dtsi
index 7c3dde84d19..937ad7e4611 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dtsi
+++ b/arch/powerpc/boot/dts/mpc8536ds.dtsi
@@ -200,12 +200,10 @@
phy0: ethernet-phy@0 {
interrupts = <10 0x1 0 0>;
reg = <0>;
- device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupts = <10 0x1 0 0>;
reg = <1>;
- device_type = "ethernet-phy";
};
sgmii_phy0: sgmii-phy@0 {
interrupts = <6 1 0 0>;
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index 2d31863accf..7ce274c9a2d 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -165,19 +165,16 @@
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x0>;
- device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x1>;
- device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <7 1>;
reg = <0x3>;
- device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index 1c03c266737..4d35a3e0fb0 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -165,13 +165,11 @@
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x0>;
- device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x1>;
- device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dtsi b/arch/powerpc/boot/dts/mpc8544ds.dtsi
index b219d035d79..47d986b041f 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dtsi
+++ b/arch/powerpc/boot/dts/mpc8544ds.dtsi
@@ -82,12 +82,10 @@
phy0: ethernet-phy@0 {
interrupts = <10 1 0 0>;
reg = <0x0>;
- device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupts = <10 1 0 0>;
reg = <0x1>;
- device_type = "ethernet-phy";
};
sgmii_phy0: sgmii-phy@0 {
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dtsi b/arch/powerpc/boot/dts/mpc8548cds.dtsi
index c61f525e474..3bc7d471122 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dtsi
+++ b/arch/powerpc/boot/dts/mpc8548cds.dtsi
@@ -109,22 +109,18 @@
phy0: ethernet-phy@0 {
interrupts = <5 1 0 0>;
reg = <0x0>;
- device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupts = <5 1 0 0>;
reg = <0x1>;
- device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupts = <5 1 0 0>;
reg = <0x2>;
- device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupts = <5 1 0 0>;
reg = <0x3>;
- device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index 36a7ea138c2..f115f21cb0a 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -165,13 +165,11 @@
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x0>;
- device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x1>;
- device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts
index 1a43f5a968f..0d70921d612 100644
--- a/arch/powerpc/boot/dts/mpc8560ads.dts
+++ b/arch/powerpc/boot/dts/mpc8560ads.dts
@@ -154,25 +154,21 @@
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x0>;
- device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x1>;
- device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <7 1>;
reg = <0x2>;
- device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <7 1>;
reg = <0x3>;
- device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 09598bb5d44..bead2b655b9 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -91,22 +91,18 @@
phy0: ethernet-phy@7 {
interrupts = <1 1 0 0>;
reg = <0x7>;
- device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupts = <2 1 0 0>;
reg = <0x1>;
- device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupts = <1 1 0 0>;
reg = <0x2>;
- device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupts = <2 1 0 0>;
reg = <0x3>;
- device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
@@ -236,25 +232,21 @@
interrupt-parent = <&mpic>;
interrupts = <1 1 0 0>;
reg = <0x7>;
- device_type = "ethernet-phy";
};
qe_phy1: ethernet-phy@01 {
interrupt-parent = <&mpic>;
interrupts = <2 1 0 0>;
reg = <0x1>;
- device_type = "ethernet-phy";
};
qe_phy2: ethernet-phy@02 {
interrupt-parent = <&mpic>;
interrupts = <1 1 0 0>;
reg = <0x2>;
- device_type = "ethernet-phy";
};
qe_phy3: ethernet-phy@03 {
interrupt-parent = <&mpic>;
interrupts = <2 1 0 0>;
reg = <0x3>;
- device_type = "ethernet-phy";
};
};
};
diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
index fe0d60935e9..d0dcdafa5eb 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -276,33 +276,27 @@
interrupt-parent = <&mpic>;
interrupts = <1 1 0 0>;
reg = <0x7>;
- device_type = "ethernet-phy";
};
qe_phy1: ethernet-phy@01 {
interrupt-parent = <&mpic>;
interrupts = <2 1 0 0>;
reg = <0x1>;
- device_type = "ethernet-phy";
};
qe_phy2: ethernet-phy@02 {
interrupt-parent = <&mpic>;
interrupts = <3 1 0 0>;
reg = <0x2>;
- device_type = "ethernet-phy";
};
qe_phy3: ethernet-phy@03 {
interrupt-parent = <&mpic>;
interrupts = <4 1 0 0>;
reg = <0x3>;
- device_type = "ethernet-phy";
};
qe_phy5: ethernet-phy@04 {
reg = <0x04>;
- device_type = "ethernet-phy";
};
qe_phy7: ethernet-phy@06 {
reg = <0x6>;
- device_type = "ethernet-phy";
};
tbi1: tbi-phy@11 {
reg = <0x11>;
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 1e8666ccbed..1c03060dd0b 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -211,25 +211,21 @@
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0>;
- device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <1>;
- device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <2>;
- device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <3>;
- device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts b/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts
index fd4cd4da60b..bb575e28042 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts
@@ -211,25 +211,21 @@
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0>;
- device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <1>;
- device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <2>;
- device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <3>;
- device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts
index bd700651f36..34c1f48b1a0 100644
--- a/arch/powerpc/boot/dts/mpc866ads.dts
+++ b/arch/powerpc/boot/dts/mpc866ads.dts
@@ -74,7 +74,6 @@
#size-cells = <0>;
PHY: ethernet-phy@f {
reg = <0xf>;
- device_type = "ethernet-phy";
};
};
diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts
index b123e9f7a5a..4e93bd961e0 100644
--- a/arch/powerpc/boot/dts/mpc885ads.dts
+++ b/arch/powerpc/boot/dts/mpc885ads.dts
@@ -86,17 +86,14 @@
PHY0: ethernet-phy@0 {
reg = <0x0>;
- device_type = "ethernet-phy";
};
PHY1: ethernet-phy@1 {
reg = <0x1>;
- device_type = "ethernet-phy";
};
PHY2: ethernet-phy@2 {
reg = <0x2>;
- device_type = "ethernet-phy";
};
};
diff --git a/arch/powerpc/boot/dts/mvme5100.dts b/arch/powerpc/boot/dts/mvme5100.dts
new file mode 100644
index 00000000000..1ecb341a232
--- /dev/null
+++ b/arch/powerpc/boot/dts/mvme5100.dts
@@ -0,0 +1,185 @@
+/*
+ * Device Tree Source for Motorola/Emerson MVME5100.
+ *
+ * Copyright 2013 CSC Australia Pty. Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "MVME5100";
+ compatible = "MVME5100";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ serial0 = &serial0;
+ pci0 = &pci0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,7410 {
+ device_type = "cpu";
+ reg = <0x0>;
+ /* Following required by dtc but not used */
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ timebase-frequency = <25000000>;
+ clock-frequency = <500000000>;
+ bus-frequency = <100000000>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x20000000>;
+ };
+
+ hawk@fef80000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "hawk-bridge", "simple-bus";
+ ranges = <0x0 0xfef80000 0x10000>;
+ reg = <0xfef80000 0x10000>;
+
+ serial0: serial@8000 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x8000 0x80>;
+ reg-shift = <4>;
+ clock-frequency = <1843200>;
+ current-speed = <9600>;
+ interrupts = <1 1>; // IRQ1 Level Active Low.
+ interrupt-parent = <&mpic>;
+ };
+
+ serial1: serial@8200 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x8200 0x80>;
+ reg-shift = <4>;
+ clock-frequency = <1843200>;
+ current-speed = <9600>;
+ interrupts = <1 1>; // IRQ1 Level Active Low.
+ interrupt-parent = <&mpic>;
+ };
+
+ mpic: interrupt-controller@f3f80000 {
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ device_type = "open-pic";
+ compatible = "chrp,open-pic";
+ interrupt-controller;
+ reg = <0xf3f80000 0x40000>;
+ };
+ };
+
+ pci0: pci@feff0000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "hawk-pci";
+ reg = <0xfec00000 0x400000>;
+ 8259-interrupt-acknowledge = <0xfeff0030>;
+ ranges = <0x1000000 0x0 0x0 0xfe000000 0x0 0x800000
+ 0x2000000 0x0 0x80000000 0x80000000 0x0 0x74000000>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+
+ /*
+ * This definition (IDSEL 11) duplicates the
+ * interrupts definition in the i8259
+ * interrupt controller below.
+ *
+ * Do not change the interrupt sense/polarity from
+ * 0x2 to anything else, doing so will cause endless
+ * "spurious" i8259 interrupts to be fielded.
+ */
+ // IDSEL 11 - iPMC712 PCI/ISA Bridge
+ 0x5800 0x0 0x0 0x1 &mpic 0x0 0x2
+ 0x5800 0x0 0x0 0x2 &mpic 0x0 0x2
+ 0x5800 0x0 0x0 0x3 &mpic 0x0 0x2
+ 0x5800 0x0 0x0 0x4 &mpic 0x0 0x2
+
+ /* IDSEL 12 - Not Used */
+
+ /* IDSEL 13 - Universe VME Bridge */
+ 0x6800 0x0 0x0 0x1 &mpic 0x5 0x1
+ 0x6800 0x0 0x0 0x2 &mpic 0x6 0x1
+ 0x6800 0x0 0x0 0x3 &mpic 0x7 0x1
+ 0x6800 0x0 0x0 0x4 &mpic 0x8 0x1
+
+ /* IDSEL 14 - ENET 1 */
+ 0x7000 0x0 0x0 0x1 &mpic 0x2 0x1
+
+ /* IDSEL 15 - Not Used */
+
+ /* IDSEL 16 - PMC Slot 1 */
+ 0x8000 0x0 0x0 0x1 &mpic 0x9 0x1
+ 0x8000 0x0 0x0 0x2 &mpic 0xa 0x1
+ 0x8000 0x0 0x0 0x3 &mpic 0xb 0x1
+ 0x8000 0x0 0x0 0x4 &mpic 0xc 0x1
+
+ /* IDSEL 17 - PMC Slot 2 */
+ 0x8800 0x0 0x0 0x1 &mpic 0xc 0x1
+ 0x8800 0x0 0x0 0x2 &mpic 0x9 0x1
+ 0x8800 0x0 0x0 0x3 &mpic 0xa 0x1
+ 0x8800 0x0 0x0 0x4 &mpic 0xb 0x1
+
+ /* IDSEL 18 - Not Used */
+
+ /* IDSEL 19 - ENET 2 */
+ 0x9800 0x0 0x0 0x1 &mpic 0xd 0x1
+
+ /* IDSEL 20 - PMCSPAN (PCI-X) */
+ 0xa000 0x0 0x0 0x1 &mpic 0x9 0x1
+ 0xa000 0x0 0x0 0x2 &mpic 0xa 0x1
+ 0xa000 0x0 0x0 0x3 &mpic 0xb 0x1
+ 0xa000 0x0 0x0 0x4 &mpic 0xc 0x1
+
+ >;
+
+ isa {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "isa";
+ compatible = "isa";
+ ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>;
+ interrupt-parent = <&i8259>;
+
+ i8259: interrupt-controller@20 {
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ interrupts = <0 2>;
+ device_type = "interrupt-controller";
+ compatible = "chrp,iic";
+ interrupt-controller;
+ reg = <1 0x00000020 0x00000002
+ 1 0x000000a0 0x00000002
+ 1 0x000004d0 0x00000002>;
+ interrupt-parent = <&mpic>;
+ };
+
+ };
+
+ };
+
+ chosen {
+ linux,stdout-path = &serial0;
+ };
+
+};
diff --git a/arch/powerpc/boot/dts/oca4080.dts b/arch/powerpc/boot/dts/oca4080.dts
new file mode 100644
index 00000000000..3d4c751d160
--- /dev/null
+++ b/arch/powerpc/boot/dts/oca4080.dts
@@ -0,0 +1,118 @@
+/*
+ * OCA4080 Device Tree Source
+ *
+ * Copyright 2014 Prodrive Technologies B.V.
+ *
+ * Based on:
+ * P4080DS Device Tree Source
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p4080si-pre.dtsi"
+
+/ {
+ model = "fsl,OCA4080";
+ compatible = "fsl,OCA4080";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ memory {
+ device_type = "memory";
+ };
+
+ dcsr: dcsr@f00000000 {
+ ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+ };
+
+ soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
+
+ i2c@118000 {
+ status = "disabled";
+ };
+
+ i2c@118100 {
+ status = "disabled";
+ };
+
+ i2c@119000 {
+ status = "disabled";
+ };
+
+ i2c@119100 {
+ status = "disabled";
+ };
+
+ usb0: usb@210000 {
+ status = "disabled";
+ };
+
+ usb1: usb@211000 {
+ status = "disabled";
+ };
+ };
+
+ rio: rapidio@ffe0c0000 {
+ reg = <0xf 0xfe0c0000 0 0x11000>;
+
+ port1 {
+ ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+ };
+ };
+
+ lbc: localbus@ffe124000 {
+ reg = <0xf 0xfe124000 0 0x1000>;
+ ranges = <0 0 0xf 0xef800000 0x800000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x00800000>;
+ bank-width = <2>;
+ device-width = <2>;
+ };
+ };
+
+ pci0: pcie@ffe200000 {
+ status = "disabled";
+ };
+
+ pci1: pcie@ffe201000 {
+ status = "disabled";
+ };
+
+ pci2: pcie@ffe202000 {
+ status = "disabled";
+ };
+};
+
+/include/ "fsl/p4080si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb-pa.dts b/arch/powerpc/boot/dts/p1010rdb-pa.dts
new file mode 100644
index 00000000000..767d4c03285
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1010rdb-pa.dts
@@ -0,0 +1,23 @@
+/*
+ * P1010 RDB Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/p1010si-pre.dtsi"
+
+/ {
+ model = "fsl,P1010RDB";
+ compatible = "fsl,P1010RDB";
+
+ /include/ "p1010rdb_32b.dtsi"
+};
+
+/include/ "p1010rdb.dtsi"
+/include/ "p1010rdb-pa.dtsi"
+/include/ "fsl/p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb-pa.dtsi b/arch/powerpc/boot/dts/p1010rdb-pa.dtsi
new file mode 100644
index 00000000000..434fb2d5857
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1010rdb-pa.dtsi
@@ -0,0 +1,85 @@
+/*
+ * P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc_nand {
+ partition@0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND U-Boot Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 1MB for DTB Image */
+ reg = <0x00100000 0x00100000>;
+ label = "NAND DTB Image";
+ };
+
+ partition@200000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00200000 0x00400000>;
+ label = "NAND Linux Kernel Image";
+ };
+
+ partition@600000 {
+ /* 4MB for Compressed Root file System Image */
+ reg = <0x00600000 0x00400000>;
+ label = "NAND Compressed RFS Image";
+ };
+
+ partition@a00000 {
+ /* 15MB for JFFS2 based Root file System */
+ reg = <0x00a00000 0x00f00000>;
+ label = "NAND JFFS2 Root File System";
+ };
+
+ partition@1900000 {
+ /* 7MB for User Area */
+ reg = <0x01900000 0x00700000>;
+ label = "NAND User area";
+ };
+};
+
+&phy0 {
+ interrupts = <1 1 0 0>;
+};
+
+&phy1 {
+ interrupts = <2 1 0 0>;
+};
+
+&phy2 {
+ interrupts = <4 1 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/p1010rdb_36b.dts b/arch/powerpc/boot/dts/p1010rdb-pa_36b.dts
index 64776f4a465..3033371bc00 100644
--- a/arch/powerpc/boot/dts/p1010rdb_36b.dts
+++ b/arch/powerpc/boot/dts/p1010rdb-pa_36b.dts
@@ -38,52 +38,9 @@
model = "fsl,P1010RDB";
compatible = "fsl,P1010RDB";
- memory {
- device_type = "memory";
- };
-
- board_ifc: ifc: ifc@fffe1e000 {
- /* NOR, NAND Flashes and CPLD on board */
- ranges = <0x0 0x0 0xf 0xee000000 0x02000000
- 0x1 0x0 0xf 0xff800000 0x00010000
- 0x3 0x0 0xf 0xffb00000 0x00000020>;
- reg = <0xf 0xffe1e000 0 0x2000>;
- };
-
- board_soc: soc: soc@fffe00000 {
- ranges = <0x0 0xf 0xffe00000 0x100000>;
- };
-
- pci0: pcie@fffe09000 {
- reg = <0xf 0xffe09000 0 0x1000>;
- ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
- pcie@0 {
- ranges = <0x2000000 0x0 0xc0000000
- 0x2000000 0x0 0xc0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-
- pci1: pcie@fffe0a000 {
- reg = <0xf 0xffe0a000 0 0x1000>;
- ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
- pcie@0 {
- ranges = <0x2000000 0x0 0xc0000000
- 0x2000000 0x0 0xc0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
+ /include/ "p1010rdb_36b.dtsi"
};
/include/ "p1010rdb.dtsi"
+/include/ "p1010rdb-pa.dtsi"
/include/ "fsl/p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb-pb.dts b/arch/powerpc/boot/dts/p1010rdb-pb.dts
new file mode 100644
index 00000000000..6eeb7d3185b
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1010rdb-pb.dts
@@ -0,0 +1,35 @@
+/*
+ * P1010 RDB Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/p1010si-pre.dtsi"
+
+/ {
+ model = "fsl,P1010RDB-PB";
+ compatible = "fsl,P1010RDB-PB";
+
+ /include/ "p1010rdb_32b.dtsi"
+};
+
+/include/ "p1010rdb.dtsi"
+
+&phy0 {
+ interrupts = <0 1 0 0>;
+};
+
+&phy1 {
+ interrupts = <2 1 0 0>;
+};
+
+&phy2 {
+ interrupts = <1 1 0 0>;
+};
+
+/include/ "fsl/p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb-pb_36b.dts b/arch/powerpc/boot/dts/p1010rdb-pb_36b.dts
new file mode 100644
index 00000000000..7ab3c907b32
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1010rdb-pb_36b.dts
@@ -0,0 +1,58 @@
+/*
+ * P1010 RDB Device Tree Source (36-bit address map)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1010si-pre.dtsi"
+
+/ {
+ model = "fsl,P1010RDB-PB";
+ compatible = "fsl,P1010RDB-PB";
+
+ /include/ "p1010rdb_36b.dtsi"
+};
+
+/include/ "p1010rdb.dtsi"
+
+&phy0 {
+ interrupts = <0 1 0 0>;
+};
+
+&phy1 {
+ interrupts = <2 1 0 0>;
+};
+
+&phy2 {
+ interrupts = <1 1 0 0>;
+};
+
+/include/ "fsl/p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb.dts b/arch/powerpc/boot/dts/p1010rdb.dts
deleted file mode 100644
index b868d22984e..00000000000
--- a/arch/powerpc/boot/dts/p1010rdb.dts
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * P1010 RDB Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/include/ "fsl/p1010si-pre.dtsi"
-
-/ {
- model = "fsl,P1010RDB";
- compatible = "fsl,P1010RDB";
-
- memory {
- device_type = "memory";
- };
-
- board_ifc: ifc: ifc@ffe1e000 {
- /* NOR, NAND Flashes and CPLD on board */
- ranges = <0x0 0x0 0x0 0xee000000 0x02000000
- 0x1 0x0 0x0 0xff800000 0x00010000
- 0x3 0x0 0x0 0xffb00000 0x00000020>;
- reg = <0x0 0xffe1e000 0 0x2000>;
- };
-
- board_soc: soc: soc@ffe00000 {
- ranges = <0x0 0x0 0xffe00000 0x100000>;
- };
-
- pci0: pcie@ffe09000 {
- reg = <0 0xffe09000 0 0x1000>;
- ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- pcie@0 {
- ranges = <0x2000000 0x0 0xa0000000
- 0x2000000 0x0 0xa0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-
- pci1: pcie@ffe0a000 {
- reg = <0 0xffe0a000 0 0x1000>;
- ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- pcie@0 {
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-};
-
-/include/ "p1010rdb.dtsi"
-/include/ "fsl/p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb.dtsi b/arch/powerpc/boot/dts/p1010rdb.dtsi
index ec7c27a6467..ea534efa790 100644
--- a/arch/powerpc/boot/dts/p1010rdb.dtsi
+++ b/arch/powerpc/boot/dts/p1010rdb.dtsi
@@ -69,49 +69,11 @@
};
};
- nand@1,0 {
+ ifc_nand: nand@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,ifc-nand";
reg = <0x1 0x0 0x10000>;
-
- partition@0 {
- /* This location must not be altered */
- /* 1MB for u-boot Bootloader Image */
- reg = <0x0 0x00100000>;
- label = "NAND U-Boot Image";
- read-only;
- };
-
- partition@100000 {
- /* 1MB for DTB Image */
- reg = <0x00100000 0x00100000>;
- label = "NAND DTB Image";
- };
-
- partition@200000 {
- /* 4MB for Linux Kernel Image */
- reg = <0x00200000 0x00400000>;
- label = "NAND Linux Kernel Image";
- };
-
- partition@600000 {
- /* 4MB for Compressed Root file System Image */
- reg = <0x00600000 0x00400000>;
- label = "NAND Compressed RFS Image";
- };
-
- partition@a00000 {
- /* 15MB for JFFS2 based Root file System */
- reg = <0x00a00000 0x00f00000>;
- label = "NAND JFFS2 Root File System";
- };
-
- partition@1900000 {
- /* 7MB for User Area */
- reg = <0x01900000 0x00700000>;
- label = "NAND User area";
- };
};
cpld@3,0 {
@@ -193,17 +155,14 @@
mdio@24000 {
phy0: ethernet-phy@0 {
- interrupts = <3 1 0 0>;
reg = <0x1>;
};
phy1: ethernet-phy@1 {
- interrupts = <2 1 0 0>;
reg = <0x0>;
};
phy2: ethernet-phy@2 {
- interrupts = <2 1 0 0>;
reg = <0x2>;
};
diff --git a/arch/powerpc/boot/dts/p1010rdb_32b.dtsi b/arch/powerpc/boot/dts/p1010rdb_32b.dtsi
new file mode 100644
index 00000000000..fdc19aab2f7
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1010rdb_32b.dtsi
@@ -0,0 +1,79 @@
+/*
+ * P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+memory {
+ device_type = "memory";
+};
+
+board_ifc: ifc: ifc@ffe1e000 {
+ /* NOR, NAND Flashes and CPLD on board */
+ ranges = <0x0 0x0 0x0 0xee000000 0x02000000
+ 0x1 0x0 0x0 0xff800000 0x00010000
+ 0x3 0x0 0x0 0xffb00000 0x00000020>;
+ reg = <0x0 0xffe1e000 0 0x2000>;
+};
+
+board_soc: soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+};
+
+pci0: pcie@ffe09000 {
+ reg = <0 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+};
+
+pci1: pcie@ffe0a000 {
+ reg = <0 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1010rdb_36b.dtsi b/arch/powerpc/boot/dts/p1010rdb_36b.dtsi
new file mode 100644