1 files changed, 8 insertions, 12 deletions
diff --git a/fs/nfsd/vfs.h b/fs/nfsd/vfs.h
index a4be2e38967..91b6ae3f658 100644
--- a/fs/nfsd/vfs.h
+++ b/fs/nfsd/vfs.h
@@ -52,9 +52,6 @@ __be32		nfsd_setattr(struct svc_rqst *, struct svc_fh *,
 				struct iattr *, int, time_t);
 int nfsd_mountpoint(struct dentry *, struct svc_export *);
 #ifdef CONFIG_NFSD_V4
-__be32          nfsd4_set_nfs4_acl(struct svc_rqst *, struct svc_fh *,
-                    struct nfs4_acl *);
-int             nfsd4_get_nfs4_acl(struct svc_rqst *, struct dentry *, struct nfs4_acl **);
 __be32          nfsd4_set_nfs4_label(struct svc_rqst *, struct svc_fh *,
 		    struct xdr_netobj *);
 #endif /* CONFIG_NFSD_V4 */
@@ -73,10 +70,16 @@ __be32		nfsd_commit(struct svc_rqst *, struct svc_fh *,
 __be32		nfsd_open(struct svc_rqst *, struct svc_fh *, umode_t,
 				int, struct file **);
 void		nfsd_close(struct file *);
+struct raparms;
+__be32		nfsd_get_tmp_read_open(struct svc_rqst *, struct svc_fh *,
+				struct file **, struct raparms **);
+void		nfsd_put_tmp_read_open(struct file *, struct raparms *);
+int		nfsd_splice_read(struct svc_rqst *,
+				struct file *, loff_t, unsigned long *);
+int		nfsd_readv(struct file *, loff_t, struct kvec *, int,
+				unsigned long *);
 __be32 		nfsd_read(struct svc_rqst *, struct svc_fh *,
 				loff_t, struct kvec *, int, unsigned long *);
-__be32 		nfsd_read_file(struct svc_rqst *, struct svc_fh *, struct file *,
-				loff_t, struct kvec *, int, unsigned long *);
 __be32 		nfsd_write(struct svc_rqst *, struct svc_fh *,struct file *,
 				loff_t, struct kvec *,int, unsigned long *, int *);
 __be32		nfsd_readlink(struct svc_rqst *, struct svc_fh *,
@@ -89,8 +92,6 @@ __be32		nfsd_link(struct svc_rqst *, struct svc_fh *,
 __be32		nfsd_rename(struct svc_rqst *,
 				struct svc_fh *, char *, int,
 				struct svc_fh *, char *, int);
-__be32		nfsd_remove(struct svc_rqst *,
-				struct svc_fh *, char *, int);
 __be32		nfsd_unlink(struct svc_rqst *, struct svc_fh *, int type,
 				char *name, int len);
 __be32		nfsd_readdir(struct svc_rqst *, struct svc_fh *,
@@ -101,11 +102,6 @@ __be32		nfsd_statfs(struct svc_rqst *, struct svc_fh *,
 __be32		nfsd_permission(struct svc_rqst *, struct svc_export *,
 				struct dentry *, int);
 
-#if defined(CONFIG_NFSD_V2_ACL) || defined(CONFIG_NFSD_V3_ACL)
-struct posix_acl *nfsd_get_posix_acl(struct svc_fh *, int);
-int nfsd_set_posix_acl(struct svc_fh *, int, struct posix_acl *);
-#endif
-
 static inline int fh_want_write(struct svc_fh *fh)
 {
 	int ret = mnt_want_write(fh->fh_export->ex_path.mnt);
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e2541981779..290f02ee015 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -6,6 +6,7 @@ config ARM
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_HAVE_CUSTOM_GPIO_H
 	select ARCH_MIGHT_HAVE_PC_PARPORT
+	select ARCH_SUPPORTS_ATOMIC_RMW
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF
 	select ARCH_WANT_IPC_PARSE_VERSION
@@ -24,14 +25,15 @@ config ARM
 	select GENERIC_STRNCPY_FROM_USER
 	select GENERIC_STRNLEN_USER
 	select HARDIRQS_SW_RESEND
+	select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT)
 	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT)
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_BPF_JIT
+	select HAVE_CC_STACKPROTECTOR
 	select HAVE_CONTEXT_TRACKING
 	select HAVE_C_RECORDMCOUNT
-	select HAVE_CC_STACKPROTECTOR
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_API_DEBUG
 	select HAVE_DMA_ATTRS
@@ -113,9 +115,6 @@ config ARM_DMA_IOMMU_ALIGNMENT
 
 endif
 
-config HAVE_PWM
-	bool
-
 config MIGHT_HAVE_PCI
 	bool
 
@@ -129,7 +128,7 @@ config HAVE_TCM
 config HAVE_PROC_CPU
 	bool
 
-config NO_IOPORT
+config NO_IOPORT_MAP
 	bool
 
 config EISA
@@ -167,12 +166,9 @@ config TRACE_IRQFLAGS_SUPPORT
 	bool
 	default y
 
-config RWSEM_GENERIC_SPINLOCK
-	bool
-	default y
-
 config RWSEM_XCHGADD_ALGORITHM
 	bool
+	default y
 
 config ARCH_HAS_ILOG2_U32
 	bool
@@ -180,13 +176,6 @@ config ARCH_HAS_ILOG2_U32
 config ARCH_HAS_ILOG2_U64
 	bool
 
-config ARCH_HAS_CPUFREQ
-	bool
-	help
-	  Internal node to signify that the ARCH has CPUFREQ support
-	  and that the relevant menu configurations are displayed for
-	  it.
-
 config ARCH_HAS_BANDGAP
 	bool
 
@@ -207,6 +196,9 @@ config ZONE_DMA
 config NEED_DMA_MAP_STATE
        def_bool y
 
+config ARCH_SUPPORTS_UPROBES
+	def_bool y
+
 config ARCH_HAS_DMA_SET_COHERENT_MASK
 	bool
 
@@ -306,18 +298,22 @@ choice
 config ARCH_MULTIPLATFORM
 	bool "Allow multiple platforms to be selected"
 	depends on MMU
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select ARM_HAS_SG_CHAIN
 	select ARM_PATCH_PHYS_VIRT
 	select AUTO_ZRELADDR
+	select CLKSRC_OF
 	select COMMON_CLK
+	select GENERIC_CLOCKEVENTS
+	select MIGHT_HAVE_PCI
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
 	select USE_OF
 
 config ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
-	select ARCH_HAS_CPUFREQ
 	select ARM_AMBA
-	select ARM_PATCH_PHYS_VIRT
+	select ARM_PATCH_PHYS_VIRT if MMU
 	select AUTO_ZRELADDR
 	select COMMON_CLK
 	select COMMON_CLK_VERSATILE
@@ -371,7 +367,6 @@ config ARCH_AT91
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select IRQ_DOMAIN
-	select NEED_MACH_GPIO_H
 	select NEED_MACH_IO_H if PCCARD
 	select PINCTRL
 	select PINCTRL_AT91 if USE_OF
@@ -388,8 +383,6 @@ config ARCH_CLPS711X
 	select CPU_ARM720T
 	select GENERIC_CLOCKEVENTS
 	select MFD_SYSCON
-	select MULTI_IRQ_HANDLER
-	select SPARSE_IRQ
 	help
 	  Support for Cirrus Logic 711x/721x/731x based boards.
 
@@ -409,7 +402,7 @@ config ARCH_EBSA110
 	select ISA
 	select NEED_MACH_IO_H
 	select NEED_MACH_MEMORY_H
-	select NO_IOPORT
+	select NO_IOPORT_MAP
 	help
 	  This is an evaluation board for the StrongARM processor available
 	  from Digital. It has limited hardware on-board, including an
@@ -421,15 +414,13 @@ config ARCH_EFM32
 	depends on !MMU
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_NVIC
-	# CLKSRC_MMIO is wrong here, but needed until a proper fix is merged,
-	# i.e. CLKSRC_EFM32 selecting CLKSRC_MMIO
-	select CLKSRC_MMIO
+	select AUTO_ZRELADDR
 	select CLKSRC_OF
 	select COMMON_CLK
 	select CPU_V7M
 	select GENERIC_CLOCKEVENTS
 	select NO_DMA
-	select NO_IOPORT
+	select NO_IOPORT_MAP
 	select SPARSE_IRQ
 	select USE_OF
 	help
@@ -479,6 +470,7 @@ config ARCH_IOP13XX
 	select PCI
 	select PLAT_IOP
 	select VMSPLIT_1G
+	select SPARSE_IRQ
 	help
 	  Support for Intel's IOP13XX (XScale) family of processors.
 
@@ -511,8 +503,8 @@ config ARCH_IXP4XX
 	bool "IXP4xx-based"
 	depends on MMU
 	select ARCH_HAS_DMA_SET_COHERENT_MASK
-	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_SUPPORTS_BIG_ENDIAN
 	select CLKSRC_MMIO
 	select CPU_XSCALE
 	select DMABOUNCE if PCI
@@ -534,13 +526,11 @@ config ARCH_DOVE
 	select PINCTRL
 	select PINCTRL_DOVE
 	select PLAT_ORION_LEGACY
-	select USB_ARCH_HAS_EHCI
 	help
 	  Support for the Marvell Dove SoC 88AP510
 
 config ARCH_KIRKWOOD
 	bool "Marvell Kirkwood"
-	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
 	select CPU_FEROCEON
 	select GENERIC_CLOCKEVENTS
@@ -632,8 +622,6 @@ config ARCH_LPC32XX
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
 	select HAVE_IDE
-	select HAVE_PWM
-	select USB_ARCH_HAS_OHCI
 	select USE_OF
 	help
 	  Support for the NXP LPC32XX family of processors
@@ -641,7 +629,6 @@ config ARCH_LPC32XX
 config ARCH_PXA
 	bool "PXA2xx/PXA3xx-based"
 	depends on MMU
-	select ARCH_HAS_CPUFREQ
 	select ARCH_MTD_XIP
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_CPU_SUSPEND if PM
@@ -657,9 +644,8 @@ config ARCH_PXA
 	help
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
-config ARCH_MSM_NODT
-	bool "Qualcomm MSM"
-	select ARCH_MSM
+config ARCH_MSM
+	bool "Qualcomm MSM (non-multiplatform)"
 	select ARCH_REQUIRE_GPIOLIB
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
@@ -673,7 +659,7 @@ config ARCH_MSM_NODT
 config ARCH_SHMOBILE_LEGACY
 	bool "Renesas ARM SoCs (non-multiplatform)"
 	select ARCH_SHMOBILE
-	select ARM_PATCH_PHYS_VIRT
+	select ARM_PATCH_PHYS_VIRT if MMU
 	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
@@ -682,7 +668,7 @@ config ARCH_SHMOBILE_LEGACY
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select MULTI_IRQ_HANDLER
-	select NO_IOPORT
+	select NO_IOPORT_MAP
 	select PINCTRL
 	select PM_GENERIC_DOMAINS if PM
 	select SPARSE_IRQ
@@ -697,13 +683,14 @@ config ARCH_RPC
 	select ARCH_MAY_HAVE_PC_FDC
 	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_USES_GETTIMEOFFSET
+	select CPU_SA110
 	select FIQ
 	select HAVE_IDE
 	select HAVE_PATA_PLATFORM
 	select ISA_DMA_API
 	select NEED_MACH_IO_H
 	select NEED_MACH_MEMORY_H
-	select NO_IOPORT
+	select NO_IOPORT_MAP
 	select VIRT_TO_BUS
 	help
 	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
@@ -711,7 +698,6 @@ config ARCH_RPC
 
 config ARCH_SA1100
 	bool "SA1100-based"
-	select ARCH_HAS_CPUFREQ
 	select ARCH_MTD_XIP
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SPARSEMEM_ENABLE
@@ -729,8 +715,8 @@ config ARCH_SA1100
 
 config ARCH_S3C24XX
 	bool "Samsung S3C24XX SoCs"
-	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
+	select ATAGS
 	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM
 	select GENERIC_CLOCKEVENTS
@@ -749,33 +735,33 @@ config ARCH_S3C24XX
 
 config ARCH_S3C64XX
 	bool "Samsung S3C64XX"
-	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_VIC
+	select ATAGS
 	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM
-	select COMMON_CLK
+	select COMMON_CLK_SAMSUNG
 	select CPU_V6K
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_TCM
-	select NO_IOPORT
+	select NO_IOPORT_MAP
 	select PLAT_SAMSUNG
-	select PM_GENERIC_DOMAINS
+	select PM_GENERIC_DOMAINS if PM
 	select S3C_DEV_NAND
 	select S3C_GPIO_TRACK
 	select SAMSUNG_ATAGS
 	select SAMSUNG_WAKEMASK
 	select SAMSUNG_WDT_RESET
-	select USB_ARCH_HAS_OHCI
 	help
 	  Samsung S3C64XX series based systems
 
 config ARCH_S5P64X0
 	bool "Samsung S5P6440 S5P6450"
+	select ATAGS
 	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM
 	select CPU_V6
@@ -794,6 +780,7 @@ config ARCH_S5P64X0
 config ARCH_S5PC100
 	bool "Samsung S5PC100"
 	select ARCH_REQUIRE_GPIOLIB
+	select ATAGS
 	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM
 	select CPU_V7
@@ -810,9 +797,9 @@ config ARCH_S5PC100
 
 config ARCH_S5PV210
 	bool "Samsung S5PV210/S5PC110"
-	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_SPARSEMEM_ENABLE
+	select ATAGS
 	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM
 	select CPU_V7
@@ -827,25 +814,6 @@ config ARCH_S5PV210
 	help
 	  Samsung S5PV210/S5PC110 series based systems
 
-config ARCH_EXYNOS
-	bool "Samsung EXYNOS"
-	select ARCH_HAS_CPUFREQ
-	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_SPARSEMEM_ENABLE
-	select ARM_GIC
-	select COMMON_CLK
-	select CPU_V7
-	select GENERIC_CLOCKEVENTS
-	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C2410_WATCHDOG if WATCHDOG
-	select HAVE_S3C_RTC if RTC_CLASS
-	select NEED_MACH_MEMORY_H
-	select SPARSE_IRQ
-	select USE_OF
-	help
-	  Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
-
 config ARCH_DAVINCI
 	bool "TI DaVinci"
 	select ARCH_HAS_HOLES_MEMORYMODEL
@@ -864,7 +832,6 @@ config ARCH_DAVINCI
 config ARCH_OMAP1
 	bool "TI OMAP1"
 	depends on MMU
-	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_OMAP
 	select ARCH_REQUIRE_GPIOLIB
@@ -886,6 +853,12 @@ menu "Multiple platform selection"
 
 comment "CPU Core family selection"
 
+config ARCH_MULTI_V4
+	bool "ARMv4 based platforms (FA526)"
+	depends on !ARCH_MULTI_V6_V7
+	select ARCH_MULTI_V4_V5
+	select CPU_FA526
+
 config ARCH_MULTI_V4T
 	bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
 	depends on !ARCH_MULTI_V6_V7
@@ -898,7 +871,7 @@ config ARCH_MULTI_V5
 	bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
 	depends on !ARCH_MULTI_V6_V7
 	select ARCH_MULTI_V4_V5
-	select CPU_ARM926T if (!CPU_ARM946E || CPU_ARM1020 || \
+	select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \
 		CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \
 		CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON)
 
@@ -908,16 +881,18 @@ config ARCH_MULTI_V4_V5
 config ARCH_MULTI_V6
 	bool "ARMv6 based platforms (ARM11)"
 	select ARCH_MULTI_V6_V7
-	select CPU_V6
+	select CPU_V6K
 
 config ARCH_MULTI_V7
 	bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
 	default y
 	select ARCH_MULTI_V6_V7
 	select CPU_V7
+	select HAVE_SMP
 
 config ARCH_MULTI_V6_V7
 	bool
+	select MIGHT_HAVE_CACHE_L2X0
 
 config ARCH_MULTI_CPU_AUTO
 	def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
@@ -925,6 +900,13 @@ config ARCH_MULTI_CPU_AUTO
 
 endmenu
 
+config ARCH_VIRT
+	bool "Dummy Virtual Machine" if ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+
 #
 # This is sorted alphabetically by mach-* pathname.  However, plat-*
 # Kconfigs may be included either alphabetically (according to the
@@ -934,9 +916,9 @@ source "arch/arm/mach-mvebu/Kconfig"
 
 source "arch/arm/mach-at91/Kconfig"
 
-source "arch/arm/mach-bcm/Kconfig"
+source "arch/arm/mach-axxia/Kconfig"
 
-source "arch/arm/mach-bcm2835/Kconfig"
+source "arch/arm/mach-bcm/Kconfig"
 
 source "arch/arm/mach-berlin/Kconfig"
 
@@ -1005,14 +987,14 @@ source "arch/arm/plat-pxa/Kconfig"
 
 source "arch/arm/mach-mmp/Kconfig"
 
+source "arch/arm/mach-qcom/Kconfig"
+
 source "arch/arm/mach-realview/Kconfig"
 
 source "arch/arm/mach-rockchip/Kconfig"
 
 source "arch/arm/mach-sa1100/Kconfig"
 
-source "arch/arm/plat-samsung/Kconfig"
-
 source "arch/arm/mach-socfpga/Kconfig"
 
 source "arch/arm/mach-spear/Kconfig"
@@ -1030,6 +1012,7 @@ source "arch/arm/mach-s5pc100/Kconfig"
 source "arch/arm/mach-s5pv210/Kconfig"
 
 source "arch/arm/mach-exynos/Kconfig"
+source "arch/arm/plat-samsung/Kconfig"
 
 source "arch/arm/mach-shmobile/Kconfig"
 
@@ -1048,8 +1031,6 @@ source "arch/arm/mach-versatile/Kconfig"
 source "arch/arm/mach-vexpress/Kconfig"
 source "arch/arm/plat-versatile/Kconfig"
 
-source "arch/arm/mach-virt/Kconfig"
-
 source "arch/arm/mach-vt8500/Kconfig"
 
 source "arch/arm/mach-w90x900/Kconfig"
@@ -1090,15 +1071,10 @@ source "arch/arm/firmware/Kconfig"
 
 source arch/arm/mm/Kconfig
 
-config ARM_NR_BANKS
-	int
-	default 16 if ARCH_EP93XX
-	default 8
-
 config IWMMXT
-	bool "Enable iWMMXt support" if !CPU_PJ4
-	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
-	default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4
+	bool "Enable iWMMXt support"
+	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B
+	default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 || CPU_PJ4B
 	help
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.
@@ -1215,19 +1191,6 @@ config ARM_ERRATA_742231
 	  register of the Cortex-A9 which reduces the linefill issuing
 	  capabilities of the processor.
 
-config PL310_ERRATA_588369
-	bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines"
-	depends on CACHE_L2X0
-	help
-	   The PL310 L2 cache controller implements three types of Clean &
-	   Invalidate maintenance operations: by Physical Address
-	   (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC).
-	   They are architecturally defined to behave as the execution of a
-	   clean operation followed immediately by an invalidate operation,
-	   both performing to the same memory location. This functionality
-	   is not correctly implemented in PL310 as clean lines are not
-	   invalidated as a result of these operations.
-
 config ARM_ERRATA_643719
 	bool "ARM errata: LoUIS bit field in CLIDR register is incorrect"
 	depends on CPU_V7 && SMP
@@ -1250,17 +1213,6 @@ config ARM_ERRATA_720789
 	  tables. The workaround changes the TLB flushing routines to invalidate
 	  entries regardless of the ASID.
 
-config PL310_ERRATA_727915
-	bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption"
-	depends on CACHE_L2X0
-	help
-	  PL310 implements the Clean & Invalidate by Way L2 cache maintenance
-	  operation (offset 0x7FC). This operation runs in background so that
-	  PL310 can handle normal accesses while it is in progress. Under very
-	  rare circumstances, due to this erratum, write data can be lost when
-	  PL310 treats a cacheable write transaction during a Clean &
-	  Invalidate by Way operation.
-
 config ARM_ERRATA_743622
 	bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
 	depends on CPU_V7
@@ -1286,21 +1238,6 @@ config ARM_ERRATA_751472
 	  operation is received by a CPU before the ICIALLUIS has completed,
 	  potentially leading to corrupted entries in the cache or TLB.
 
-config PL310_ERRATA_753970
-	bool "PL310 errata: cache sync operation may be faulty"
-	depends on CACHE_PL310
-	help
-	  This option enables the workaround for the 753970 PL310 (r3p0) erratum.
-
-	  Under some condition the effect of cache sync operation on
-	  the store buffer still remains when the operation completes.
-	  This means that the store buffer is always asked to drain and
-	  this prevents it from merging any further writes. The workaround
-	  is to replace the normal offset of cache sync operation (0x730)
-	  by another offset targeting an unmapped PL310 register 0x740.
-	  This has the same effect as the cache sync operation: store buffer
-	  drain and waiting for all buffers empty.
-
 config ARM_ERRATA_754322
 	bool "ARM errata: possible faulty MMU translations following an ASID switch"
 	depends on CPU_V7
@@ -1349,18 +1286,6 @@ config ARM_ERRATA_764369
 	  relevant cache maintenance functions and sets a specific bit
 	  in the diagnostic control register of the SCU.
 
-config PL310_ERRATA_769419
-	bool "PL310 errata: no automatic Store Buffer drain"
-	depends on CACHE_L2X0
-	help
-	  On revisions of the PL310 prior to r3p2, the Store Buffer does
-	  not automatically drain. This can cause normal, non-cacheable
-	  writes to be retained when the memory system is idle, leading
-	  to suboptimal I/O performance for drivers using coherent DMA.
-	  This option adds a write barrier to the cpu_idle loop so that,
-	  on systems with an outer cache, the store buffer is drained
-	  explicitly.
-
 config ARM_ERRATA_775420
        bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock"
        depends on CPU_V7
@@ -1561,8 +1486,8 @@ config BIG_LITTLE
 config BL_SWITCHER
 	bool "big.LITTLE switcher support"
 	depends on BIG_LITTLE && MCPM && HOTPLUG_CPU
-	select CPU_PM
 	select ARM_CPU_SUSPEND
+	select CPU_PM
 	help
 	  The big.LITTLE "switcher" provides the core functionality to
 	  transparently handle transition between a cluster of A15's
@@ -1578,6 +1503,7 @@ config BL_SWITCHER_DUMMY_IF
 
 choice
 	prompt "Memory split"
+	depends on MMU
 	default VMSPLIT_3G
 	help
 	  Select the desired split between kernel and user memory.
@@ -1595,6 +1521,7 @@ endchoice
 
 config PAGE_OFFSET
 	hex
+	default PHYS_OFFSET if !MMU
 	default 0x40000000 if VMSPLIT_1G
 	default 0x80000000 if VMSPLIT_2G
 	default 0xC0000000
@@ -1629,9 +1556,9 @@ config ARCH_NR_GPIO
 	int
 	default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
 	default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX
+	default 416 if ARCH_SUNXI
 	default 392 if ARCH_U8500
 	default 352 if ARCH_VT8500
-	default 288 if ARCH_SUNXI
 	default 264 if MACH_H4700
 	default 0
 	help
@@ -1903,9 +1830,10 @@ config XEN
 	depends on ARM && AEABI && OF
 	depends on CPU_V7 && !CPU_V6
 	depends on !GENERIC_ATOMIC64
+	depends on MMU
+	select ARCH_DMA_ADDR_T_64BIT
 	select ARM_PSCI
 	select SWIOTLB_XEN
-	select ARCH_DMA_ADDR_T_64BIT
 	help
 	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
 
@@ -1918,6 +1846,7 @@ config USE_OF
 	select IRQ_DOMAIN
 	select OF
 	select OF_EARLY_FLATTREE
+	select OF_RESERVED_MEM
 	help
 	  Include support for flattened device tree machine descriptions.
 
@@ -2165,9 +2094,7 @@ endmenu
 
 menu "CPU Power Management"
 
-if ARCH_HAS_CPUFREQ
 source "drivers/cpufreq/Kconfig"
-endif
 
 source "drivers/cpuidle/Kconfig"
 
@@ -2270,12 +2197,17 @@ source "kernel/power/Kconfig"
 config ARCH_SUSPEND_POSSIBLE
 	depends on !ARCH_S5PC100
 	depends on CPU_ARM920T || CPU_ARM926T || CPU_FEROCEON || CPU_SA1100 || \
-		CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK
+		CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK
 	def_bool y
 
 config ARM_CPU_SUSPEND
 	def_bool PM_SLEEP
 
+config ARCH_HIBERNATION_POSSIBLE
+	bool
+	depends on MMU
+	default y if ARCH_SUSPEND_POSSIBLE
+
 endmenu
 
 source "net/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 0531da8e521..8f90595069a 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -106,9 +106,14 @@ choice
 		depends on ARCH_BCM2835
 		select DEBUG_UART_PL01X
 
+	config DEBUG_BCM_5301X
+		bool "Kernel low-level debugging on BCM5301X UART1"
+		depends on ARCH_BCM_5301X
+		select DEBUG_UART_PL01X
+
 	config DEBUG_BCM_KONA_UART
 		bool "Kernel low-level debugging messages via BCM KONA UART"
-		depends on ARCH_BCM
+		depends on ARCH_BCM_MOBILE
 		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
@@ -171,15 +176,6 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to UART0 serial port on DaVinci DMx devices.
 
-	config DEBUG_DAVINCI_TNETV107X_UART1
-		bool "Kernel low-level debugging on DaVinci TNETV107x using UART1"
-		depends on ARCH_DAVINCI_TNETV107X
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART1 serial port on DaVinci TNETV107X
-		  devices.
-
 	config DEBUG_ZYNQ_UART0
 		bool "Kernel low-level debugging on Xilinx Zynq using UART0"
 		depends on ARCH_ZYNQ
@@ -321,6 +317,13 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX6SL.
 
+	config DEBUG_IMX6SX_UART
+		bool "i.MX6SX Debug UART"
+		depends on SOC_IMX6SX
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX6SX.
+
 	config DEBUG_KEYSTONE_UART0
 		bool "Kernel low-level debugging on KEYSTONE2 using UART0"
 		depends on ARCH_KEYSTONE
@@ -353,56 +356,40 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on MMP UART3.
 
-	config DEBUG_MSM_UART1
-		bool "Kernel low-level debugging messages via MSM UART1"
-		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
-		select DEBUG_MSM_UART
+	config DEBUG_MSM_UART
+		bool "Kernel low-level debugging messages via MSM UART"
+		depends on ARCH_MSM
 		help
 		  Say Y here if you want the debug print routines to direct
-		  their output to the first serial port on MSM devices.
+		  their output to the serial port on MSM devices.
 
-	config DEBUG_MSM_UART2
-		bool "Kernel low-level debugging messages via MSM UART2"
-		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
-		select DEBUG_MSM_UART
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the second serial port on MSM devices.
+		  ARCH                DEBUG_UART_PHYS   DEBUG_UART_BASE   #
+		  MSM7X00A, QSD8X50   0xa9a00000        0xe1000000        UART1
+		  MSM7X00A, QSD8X50   0xa9b00000        0xe1000000        UART2
+		  MSM7X00A, QSD8X50   0xa9c00000        0xe1000000        UART3
 
-	config DEBUG_MSM_UART3
-		bool "Kernel low-level debugging messages via MSM UART3"
-		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
-		select DEBUG_MSM_UART
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the third serial port on MSM devices.
+		  MSM7X30             0xaca00000        0xe1000000        UART1
+		  MSM7X30             0xacb00000        0xe1000000        UART2
+		  MSM7X30             0xacc00000        0xe1000000        UART3
 
-	config DEBUG_MSM8660_UART
-		bool "Kernel low-level debugging messages via MSM 8660 UART"
-		depends on ARCH_MSM8X60
-		select MSM_HAS_DEBUG_UART_HS
-		select DEBUG_MSM_UART
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port on MSM 8660 devices.
+		  Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
+		  options based on your needs.
 
-	config DEBUG_MSM8960_UART
-		bool "Kernel low-level debugging messages via MSM 8960 UART"
-		depends on ARCH_MSM8960
-		select MSM_HAS_DEBUG_UART_HS
-		select DEBUG_MSM_UART
+	config DEBUG_QCOM_UARTDM
+		bool "Kernel low-level debugging messages via QCOM UARTDM"
+		depends on ARCH_QCOM
 		help
 		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port on MSM 8960 devices.
+		  their output to the serial port on Qualcomm devices.
 
-	config DEBUG_MSM8974_UART
-		bool "Kernel low-level debugging messages via MSM 8974 UART"
-		depends on ARCH_MSM8974
-		select MSM_HAS_DEBUG_UART_HS
-		select DEBUG_MSM_UART
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port on MSM 8974 devices.
+		  ARCH      DEBUG_UART_PHYS   DEBUG_UART_BASE
+		  APQ8084   0xf995e000        0xfa75e000
+		  MSM8X60   0x19c40000        0xf0040000
+		  MSM8960   0x16440000        0xf0040000
+		  MSM8974   0xf991e000        0xfa71e000
+
+		  Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
+		  options based on your needs.
 
 	config DEBUG_MVEBU_UART
 		bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)"
@@ -629,6 +616,7 @@ choice
 	config DEBUG_S3C_UART0
 		depends on PLAT_SAMSUNG
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		bool "Use S3C UART 0 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
@@ -641,6 +629,7 @@ choice
 	config DEBUG_S3C_UART1
 		depends on PLAT_SAMSUNG
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		bool "Use S3C UART 1 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
@@ -653,6 +642,7 @@ choice
 	config DEBUG_S3C_UART2
 		depends on PLAT_SAMSUNG
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		bool "Use S3C UART 2 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
@@ -674,6 +664,33 @@ choice
 		  The uncompressor code port configuration is now handled
 		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
 
+	config DEBUG_S3C2410_UART0
+		depends on ARCH_S3C24XX
+		select DEBUG_S3C2410_UART
+		bool "Use S3C2410/S3C2412 UART 0 for low-level debug"
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART 0. The port must have been initialised
+		  by the boot-loader before use.
+
+	config DEBUG_S3C2410_UART1
+		depends on ARCH_S3C24XX
+		select DEBUG_S3C2410_UART
+		bool "Use S3C2410/S3C2412 UART 1 for low-level debug"
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART 1. The port must have been initialised
+		  by the boot-loader before use.
+
+	config DEBUG_S3C2410_UART2
+		depends on ARCH_S3C24XX
+		select DEBUG_S3C2410_UART
+		bool "Use S3C2410/S3C2412 UART 2 for low-level debug"
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART 2. The port must have been initialised
+		  by the boot-loader before use.
+
 	config DEBUG_SOCFPGA_UART
 		depends on ARCH_SOCFPGA
 		bool "Use SOCFPGA UART for low-level debug"
@@ -925,6 +942,13 @@ endchoice
 config DEBUG_EXYNOS_UART
 	bool
 
+config DEBUG_S3C2410_UART
+	bool
+	select DEBUG_S3C24XX_UART
+
+config DEBUG_S3C24XX_UART
+	bool
+
 config DEBUG_OMAP2PLUS_UART
 	bool
 	depends on ARCH_OMAP2PLUS
@@ -939,13 +963,23 @@ config DEBUG_IMX_UART_PORT
 						DEBUG_IMX51_UART || \
 						DEBUG_IMX53_UART || \
 						DEBUG_IMX6Q_UART || \
-						DEBUG_IMX6SL_UART
+						DEBUG_IMX6SL_UART || \
+						DEBUG_IMX6SX_UART
 	default 1
 	depends on ARCH_MXC
 	help
 	  Choose UART port on which kernel low-level debug messages
 	  should be output.
 
+config DEBUG_VF_UART_PORT
+	int "Vybrid Debug UART Port Selection" if DEBUG_VF_UART
+	default 1
+	range 0 3
+	depends on SOC_VF610
+	help
+	  Choose UART port on which kernel low-level debug messages
+	  should be output.
+
 config DEBUG_TEGRA_UART
 	bool
 	depends on ARCH_TEGRA
@@ -954,10 +988,6 @@ config DEBUG_STI_UART
 	bool
 	depends on ARCH_STI
 
-config DEBUG_MSM_UART
-	bool
-	depends on ARCH_MSM
-
 config DEBUG_LL_INCLUDE
 	string
 	default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
@@ -974,9 +1004,11 @@ config DEBUG_LL_INCLUDE
 				 DEBUG_IMX51_UART || \
 				 DEBUG_IMX53_UART ||\
 				 DEBUG_IMX6Q_UART || \
-				 DEBUG_IMX6SL_UART
-	default "debug/msm.S" if DEBUG_MSM_UART
+				 DEBUG_IMX6SL_UART || \
+				 DEBUG_IMX6SX_UART
+	default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
 	default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
+	default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART
 	default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
 	default "debug/sti.S" if DEBUG_STI_UART
 	default "debug/tegra.S" if DEBUG_TEGRA_UART
@@ -1014,7 +1046,6 @@ config DEBUG_UART_PHYS
 	default 0x02530c00 if DEBUG_KEYSTONE_UART0
 	default 0x02531000 if DEBUG_KEYSTONE_UART1
 	default 0x03010fe0 if ARCH_RPC
-	default 0x08108300 if DEBUG_DAVINCI_TNETV107X_UART1
 	default 0x10009000 if DEBUG_REALVIEW_STD_PORT || DEBUG_CNS3XXX || \
 				DEBUG_VEXPRESS_UART0_CA9
 	default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
@@ -1023,6 +1054,7 @@ config DEBUG_UART_PHYS
 	default 0x101f1000 if ARCH_VERSATILE
 	default 0x101fb000 if DEBUG_NOMADIK_UART
 	default 0x16000000 if ARCH_INTEGRATOR
+	default 0x18000300 if DEBUG_BCM_5301X
 	default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
 	default 0x20060000 if DEBUG_RK29_UART0
 	default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
@@ -1033,12 +1065,19 @@ config DEBUG_UART_PHYS
 	default 0x40090000 if ARCH_LPC32XX
 	default 0x40100000 if DEBUG_PXA_UART1
 	default 0x42000000 if ARCH_GEMINI
+	default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
+				DEBUG_S3C2410_UART0)
+	default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
+				DEBUG_S3C2410_UART1)
+	default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
+				DEBUG_S3C2410_UART2)
 	default 0x7c0003f8 if FOOTBRIDGE
-	default 0x80230000 if DEBUG_PICOXCELL_UART
 	default 0x80070000 if DEBUG_IMX23_UART
 	default 0x80074000 if DEBUG_IMX28_UART
+	default 0x80230000 if DEBUG_PICOXCELL_UART
 	default 0x808c0000 if ARCH_EP93XX
 	default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
+	default 0xa9a00000 if DEBUG_MSM_UART
 	default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
 	default 0xc0013000 if DEBUG_U300_UART
 	default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
@@ -1054,6 +1093,7 @@ config DEBUG_UART_PHYS
 				ARCH_ORION5X
 	default 0xf7fc9000 if DEBUG_BERLIN_UART
 	default 0xf8b00000 if DEBUG_HI3716_UART
+	default 0xf991e000 if DEBUG_QCOM_UARTDM
 	default 0xfcb00000 if DEBUG_HI3620_UART
 	default 0xfe800000 if ARCH_IOP32X
 	default 0xffc02000 if DEBUG_SOCFPGA_UART
@@ -1062,15 +1102,18 @@ config DEBUG_UART_PHYS
 	default 0xfffff700 if ARCH_IOP33X
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
 		DEBUG_LL_UART_EFM32 || \
-		DEBUG_UART_8250 || DEBUG_UART_PL01X
+		DEBUG_UART_8250 || DEBUG_UART_PL01X || \
+		DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART
 
 config DEBUG_UART_VIRT
 	hex "Virtual base address of debug UART"
 	default 0xe0010fe0 if ARCH_RPC
+	default 0xe1000000 if DEBUG_MSM_UART
 	default 0xf0000be0 if ARCH_EBSA110
 	default 0xf0009000 if DEBUG_CNS3XXX
 	default 0xf01fb000 if DEBUG_NOMADIK_UART
 	default 0xf0201000 if DEBUG_BCM2835
+	default 0xf1000300 if DEBUG_BCM_5301X
 	default 0xf11f1000 if ARCH_VERSATILE
 	default 0xf1600000 if ARCH_INTEGRATOR
 	default 0xf1c28000 if DEBUG_SUNXI_UART0
@@ -1078,9 +1121,16 @@ config DEBUG_UART_VIRT
 	default 0xf2100000 if DEBUG_PXA_UART1
 	default 0xf4090000 if ARCH_LPC32XX
 	default 0xf4200000 if ARCH_GEMINI
+	default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
+				DEBUG_S3C2410_UART0)
+	default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
+				DEBUG_S3C2410_UART1)
+	default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
+				DEBUG_S3C2410_UART2)
 	default 0xf7fc9000 if DEBUG_BERLIN_UART
 	default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
 	default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
+	default 0xfa71e000 if DEBUG_QCOM_UARTDM
 	default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
 	default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
 	default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
@@ -1099,28 +1149,28 @@ config DEBUG_UART_VIRT
 	default 0xfeb26000 if DEBUG_RK3X_UART1
 	default 0xfeb30c00 if DEBUG_KEYSTONE_UART0
 	default 0xfeb31000 if DEBUG_KEYSTONE_UART1
-	default 0xfec12000 if DEBUG_MVEBU_UART || DEBUG_MVEBU_UART_ALTERNATE
-	default 0xfed60000 if DEBUG_RK29_UART0
-	default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
-	default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
 	default 0xfec02000 if DEBUG_SOCFPGA_UART
+	default 0xfec12000 if DEBUG_MVEBU_UART || DEBUG_MVEBU_UART_ALTERNATE
 	default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0
 	default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
 	default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2
 	default 0xfed12000 if ARCH_KIRKWOOD
+	default 0xfed60000 if DEBUG_RK29_UART0
+	default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
+	default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
 	default 0xfedc0000 if ARCH_EP93XX
 	default 0xfee003f8 if FOOTBRIDGE
-	default 0xfee08300 if DEBUG_DAVINCI_TNETV107X_UART1
 	default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
-	default 0xfef36000 if DEBUG_HIGHBANK_UART
 	default 0xfee82340 if ARCH_IOP13XX
 	default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
 	default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
+	default 0xfef36000 if DEBUG_HIGHBANK_UART
 	default 0xfefff700 if ARCH_IOP33X
 	default 0xff003000 if DEBUG_U300_UART
 	default DEBUG_UART_PHYS if !MMU
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
-		DEBUG_UART_8250 || DEBUG_UART_PL01X
+		DEBUG_UART_8250 || DEBUG_UART_PL01X || \
+		DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART
 
 config DEBUG_UART_8250_SHIFT
 	int "Register offset shift for the 8250 debug UART"
@@ -1135,7 +1185,7 @@ config DEBUG_UART_8250_WORD
 	default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \
 		ARCH_KEYSTONE || \
 		DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
-		DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_DAVINCI_TNETV107X_UART1 || \
+		DEBUG_DAVINCI_DA8XX_UART2 || \
 		DEBUG_BCM_KONA_UART
 
 config DEBUG_UART_8250_FLOW_CONTROL
@@ -1145,7 +1195,7 @@ config DEBUG_UART_8250_FLOW_CONTROL
 
 config DEBUG_UNCOMPRESS
 	bool
-	depends on ARCH_MULTIPLATFORM || ARCH_MSM
+	depends on ARCH_MULTIPLATFORM || ARCH_MSM || PLAT_SAMSUNG
 	default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
 		     (!DEBUG_TEGRA_UART || !ZBOOT_ROM)
 	help
@@ -1161,7 +1211,8 @@ config DEBUG_UNCOMPRESS
 
 config UNCOMPRESS_INCLUDE
 	string
-	default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM
+	default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
+					PLAT_SAMSUNG || ARCH_EFM32
 	default "mach/uncompress.h"
 
 config EARLY_PRINTK
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 08a9ef58d9c..6721fab1373 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -138,12 +138,13 @@ endif
 textofs-$(CONFIG_ARCH_MSM7X30) := 0x00208000
 textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
 textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
+textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
 
 # Machine directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
 machine-$(CONFIG_ARCH_AT91)		+= at91
+machine-$(CONFIG_ARCH_AXXIA)		+= axxia
 machine-$(CONFIG_ARCH_BCM)		+= bcm
-machine-$(CONFIG_ARCH_BCM2835)		+= bcm2835
 machine-$(CONFIG_ARCH_BERLIN)		+= berlin
 machine-$(CONFIG_ARCH_CLPS711X)		+= clps711x
 machine-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx
@@ -180,6 +181,7 @@ machine-$(CONFIG_ARCH_OMAP2PLUS)	+= omap2
 machine-$(CONFIG_ARCH_ORION5X)		+= orion5x
 machine-$(CONFIG_ARCH_PICOXCELL)	+= picoxcell
 machine-$(CONFIG_ARCH_PXA)		+= pxa
+machine-$(CONFIG_ARCH_QCOM)		+= qcom
 machine-$(CONFIG_ARCH_REALVIEW)		+= realview
 machine-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip
 machine-$(CONFIG_ARCH_RPC)		+= rpc
@@ -199,7 +201,6 @@ machine-$(CONFIG_ARCH_U300)		+= u300
 machine-$(CONFIG_ARCH_U8500)		+= ux500
 machine-$(CONFIG_ARCH_VERSATILE)	+= versatile
 machine-$(CONFIG_ARCH_VEXPRESS)		+= vexpress
-machine-$(CONFIG_ARCH_VIRT)		+= virt
 machine-$(CONFIG_ARCH_VT8500)		+= vt8500
 machine-$(CONFIG_ARCH_W90X900)		+= w90x900
 machine-$(CONFIG_ARCH_ZYNQ)		+= zynq
@@ -310,9 +311,9 @@ $(INSTALL_TARGETS):
 %.dtb: | scripts
 	$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@
 
-PHONY += dtbs
-dtbs: scripts
-	$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) dtbs
+PHONY += dtbs dtbs_install
+dtbs dtbs_install: prepare scripts
+	$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $@
 
 # We use MRPROPER_FILES and CLEAN_FILES now
 archclean:
@@ -331,6 +332,7 @@ define archhelp
   echo  '  bootpImage    - Combined zImage and initial RAM disk'
   echo  '                  (supply initrd image via make variable INITRD=<path>)'
   echo  '* dtbs          - Build device tree blobs for enabled boards'
+  echo  '  dtbs_install  - Install dtbs to $(INSTALL_DTBS_PATH)'
   echo  '  install       - Install uncompressed kernel'
   echo  '  zinstall      - Install compressed kernel'
   echo  '  uinstall      - Install U-Boot wrapped compressed kernel'
diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore
index 47279aa96a6..0714e0334e3 100644
--- a/arch/arm/boot/compressed/.gitignore
+++ b/arch/arm/boot/compressed/.gitignore
@@ -1,4 +1,5 @@
 ashldi3.S
+bswapsdi2.S
 font.c
 lib1funcs.S
 hyp-stub.S
diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c
index d1153c8a765..9448aa0c668 100644
--- a/arch/arm/boot/compressed/atags_to_fdt.c
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
@@ -7,6 +7,8 @@
 #define do_extend_cmdline 0
 #endif
 
+#define NR_BANKS 16
+
 static int node_offset(void *fdt, const char *node_path)
 {
 	int offset = fdt_path_offset(fdt, node_path);
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 066b03480b6..3a8b32df6b3 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -60,11 +60,6 @@
 		add	\rb, \rb, #0x00010000	@ Ser1
 #endif
 		.endm
-#elif defined(CONFIG_ARCH_S3C24XX)
-		.macro loadsp, rb, tmp
-		mov	\rb, #0x50000000
-		add	\rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT
-		.endm
 #else
 		.macro	loadsp,	rb, tmp
 		addruart \rb, \tmp
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b9d6a8b485e..adb5ed9e269 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -12,6 +12,8 @@ dtb-$(CONFIG_ARCH_AT91) += ethernut5.dtb
 dtb-$(CONFIG_ARCH_AT91) += evk-pro3.dtb
 dtb-$(CONFIG_ARCH_AT91) += tny_a9260.dtb
 dtb-$(CONFIG_ARCH_AT91) += usb_a9260.dtb
+# sam9261
+dtb-$(CONFIG_ARCH_AT91) += at91sam9261ek.dtb
 # sam9263
 dtb-$(CONFIG_ARCH_AT91) += at91sam9263ek.dtb
 dtb-$(CONFIG_ARCH_AT91) += tny_a9263.dtb
@@ -29,6 +31,8 @@ dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb
 dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb
 # sam9n12
 dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb
+# sam9rl
+dtb-$(CONFIG_ARCH_AT91) += at91sam9rlek.dtb
 # sam9x5
 dtb-$(CONFIG_ARCH_AT91) += at91-ariag25.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91-cosino_mega2560.dtb
@@ -38,6 +42,7 @@ dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb
 # sama5d3
+dtb-$(CONFIG_ARCH_AT91)	+= at91-sama5d3_xplained.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d31ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d33ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d34ek.dtb
@@ -45,20 +50,17 @@ dtb-$(CONFIG_ARCH_AT91)	+= sama5d35ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d36ek.dtb
 
 dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
+dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
-dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm11351-brt.dtb \
-	bcm28155-ap.dtb
-dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
+dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb
+dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
+	bcm21664-garnet.dtb
 dtb-$(CONFIG_ARCH_BERLIN) += \
 	berlin2-sony-nsz-gs7.dtb	\
-	berlin2cd-google-chromecast.dtb
+	berlin2cd-google-chromecast.dtb	\
+	berlin2q-marvell-dmp.dtb
 dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
 	da850-evm.dtb
-dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
-	dove-cubox.dtb \
-	dove-d2plug.dtb \
-	dove-d3plug.dtb \
-	dove-dove-db.dtb
 dtb-$(CONFIG_ARCH_EFM32) += efm32gg-dk3750.dtb
 dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos4210-smdkv310.dtb \
@@ -72,23 +74,43 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos5250-arndale.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5250-snow.dtb \
+	exynos5260-xyref5260.dtb \
+	exynos5410-smdk5410.dtb \
 	exynos5420-arndale-octa.dtb \
+	exynos5420-peach-pit.dtb \
 	exynos5420-smdk5420.dtb \
 	exynos5440-sd5v1.dtb \
-	exynos5440-ssdk5440.dtb
+	exynos5440-ssdk5440.dtb \
+	exynos5800-peach-pi.dtb
 dtb-$(CONFIG_ARCH_HI3xxx) += hi3620-hi4511.dtb
 dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
 	ecx-2000.dtb
 dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
 	integratorcp.dtb
-dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
-dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
+dtb-$(CONFIG_ARCH_KEYSTONE) += k2hk-evm.dtb \
+	k2l-evm.dtb \
+	k2e-evm.dtb
+kirkwood := \
+	kirkwood-b3.dtb \
+	kirkwood-cloudbox.dtb \
 	kirkwood-db-88f6281.dtb \
 	kirkwood-db-88f6282.dtb \
 	kirkwood-dns320.dtb \
 	kirkwood-dns325.dtb \
 	kirkwood-dockstar.dtb \
 	kirkwood-dreamplug.dtb \
+	kirkwood-ds109.dtb \
+	kirkwood-ds110jv10.dtb \
+	kirkwood-ds111.dtb \
+	kirkwood-ds209.dtb \
+	kirkwood-ds210.dtb \
+	kirkwood-ds212.dtb \
+	kirkwood-ds212j.dtb \
+	kirkwood-ds409.dtb \
+	kirkwood-ds409slim.dtb \
+	kirkwood-ds411.dtb \
+	kirkwood-ds411j.dtb \
+	kirkwood-ds411slim.dtb \
 	kirkwood-goflexnet.dtb \
 	kirkwood-guruplug-server-plus.dtb \
 	kirkwood-ib62x0.dtb \
@@ -111,54 +133,81 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
 	kirkwood-nsa310a.dtb \
 	kirkwood-openblocks_a6.dtb \
 	kirkwood-openblocks_a7.dtb \
+	kirkwood-openrd-base.dtb \
+	kirkwood-openrd-client.dtb \
+	kirkwood-openrd-ultimate.dtb \
+	kirkwood-rd88f6192.dtb \
+	kirkwood-rd88f6281-a0.dtb \
+	kirkwood-rd88f6281-a1.dtb \
+	kirkwood-rs212.dtb \
+	kirkwood-rs409.dtb \
+	kirkwood-rs411.dtb \
 	kirkwood-sheevaplug.dtb \
 	kirkwood-sheevaplug-esata.dtb \
+	kirkwood-t5325.dtb \
 	kirkwood-topkick.dtb \
 	kirkwood-ts219-6281.dtb \
-	kirkwood-ts219-6282.dtb
+	kirkwood-ts219-6282.dtb \
+	kirkwood-ts419-6281.dtb \
+	kirkwood-ts419-6282.dtb
+dtb-$(CONFIG_ARCH_KIRKWOOD) += $(kirkwood)
+dtb-$(CONFIG_MACH_KIRKWOOD) += $(kirkwood)
+dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
 dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
 dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
-dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \
-	qcom-msm8960-cdp.dtb \
-	qcom-apq8074-dragonboard.dtb
-dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
-	armada-370-mirabox.dtb \
-	armada-370-netgear-rn102.dtb \
-	armada-370-netgear-rn104.dtb \
-	armada-370-rd.dtb \
-	armada-xp-axpwifiap.dtb \
-	armada-xp-db.dtb \
-	armada-xp-gp.dtb \
-	armada-xp-netgear-rn2120.dtb \
-	armada-xp-matrix.dtb \
-	armada-xp-openblocks-ax3-4.dtb
 dtb-$(CONFIG_ARCH_MXC) += \
+	imx25-eukrea-mbimxsd25-baseboard.dtb \
 	imx25-karo-tx25.dtb \
 	imx25-pdk.dtb \
 	imx27-apf27.dtb \
 	imx27-apf27dev.dtb \
 	imx27-pdk.dtb \
-	imx27-phytec-phycore-som.dtb \
 	imx27-phytec-phycore-rdk.dtb \
-	imx27-phytec-phycard-s-som.dtb \
 	imx27-phytec-phycard-s-rdk.dtb \
 	imx31-bug.dtb \
+	imx35-eukrea-mbimxsd35-baseboard.dtb \
+	imx35-pdk.dtb \
+	imx50-evk.dtb \
 	imx51-apf51.dtb \
 	imx51-apf51dev.dtb \
 	imx51-babbage.dtb \
+	imx51-digi-connectcore-jsk.dtb \
+	imx51-eukrea-mbimxsd51-baseboard.dtb \
 	imx53-ard.dtb \
-	imx53-evk.dtb \
 	imx53-m53evk.dtb \
 	imx53-mba53.dtb \
 	imx53-qsb.dtb \
+	imx53-qsrb.dtb \
 	imx53-smd.dtb \
+	imx53-tx53-x03x.dtb \
+	imx53-tx53-x13x.dtb \
+	imx53-voipac-bsb.dtb \
 	imx6dl-cubox-i.dtb \
+	imx6dl-dfi-fs700-m60.dtb \
+	imx6dl-gw51xx.dtb \
+	imx6dl-gw52xx.dtb \
+	imx6dl-gw53xx.dtb \
+	imx6dl-gw54xx.dtb \
 	imx6dl-hummingboard.dtb \
+	imx6dl-nitrogen6x.dtb \
+	imx6dl-phytec-pbab01.dtb \
+	imx6dl-riotboard.dtb \
 	imx6dl-sabreauto.dtb \
+	imx6dl-sabrelite.dtb \
 	imx6dl-sabresd.dtb \
 	imx6dl-wandboard.dtb \
 	imx6q-arm2.dtb \
+	imx6q-cm-fx6.dtb \
 	imx6q-cubox-i.dtb \
+	imx6q-dfi-fs700-m60.dtb \
+	imx6q-dmo-edmqmx6.dtb \
+	imx6q-gk802.dtb \
+	imx6q-gw51xx.dtb \
+	imx6q-gw52xx.dtb \
+	imx6q-gw53xx.dtb \
+	imx6q-gw5400-a.dtb \
+	imx6q-gw54xx.dtb \
+	imx6q-nitrogen6x.dtb \
 	imx6q-phytec-pbab01.dtb \
 	imx6q-sabreauto.dtb \
 	imx6q-sabrelite.dtb \
@@ -167,6 +216,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx6q-udoo.dtb \
 	imx6q-wandboard.dtb \
 	imx6sl-evk.dtb \
+	vf610-colibri.dtb \
 	vf610-cosmic.dtb \
 	vf610-twr.dtb
 dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
@@ -182,6 +232,9 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx28-cfa10056.dtb \
 	imx28-cfa10057.dtb \
 	imx28-cfa10058.dtb \
+	imx28-duckbill.dtb \
+	imx28-eukrea-mbmx283lc.dtb \
+	imx28-eukrea-mbmx287lc.dtb \
 	imx28-evk.dtb \
 	imx28-m28cu3.dtb \
 	imx28-m28evk.dtb \
@@ -191,60 +244,84 @@ dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb
 dtb-$(CONFIG_ARCH_NSPIRE) += nspire-cx.dtb \
 	nspire-tp.dtb \
 	nspire-clp.dtb
-dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
-	omap2430-sdp.dtb \
+dtb-$(CONFIG_ARCH_OMAP2) += omap2420-h4.dtb \
 	omap2420-n800.dtb \
 	omap2420-n810.dtb \
 	omap2420-n810-wimax.dtb \
+	omap2430-sdp.dtb
+dtb-$(CONFIG_ARCH_OMAP3) += am3517-craneboard.dtb \
+	am3517-evm.dtb \
+	am3517_mt_ventoux.dtb \
 	omap3430-sdp.dtb \
 	omap3-beagle.dtb \
+	omap3-beagle-xm.dtb \
+	omap3-beagle-xm-ab.dtb \
+	omap3-cm-t3517.dtb \
+	omap3-cm-t3530.dtb \
 	omap3-cm-t3730.dtb \
-	omap3-sbc-t3730.dtb \
 	omap3-devkit8000.dtb \
-	omap3-beagle-xm.dtb \
 	omap3-evm.dtb \
 	omap3-evm-37xx.dtb \
+	omap3-gta04.dtb \
+	omap3-igep0020.dtb \
+	omap3-igep0030.dtb \
 	omap3-ldp.dtb \
+	omap3-lilly-dbb056.dtb \
 	omap3-n900.dtb \
 	omap3-n9.dtb \
 	omap3-n950.dtb \
-	omap3-tobi.dtb \
-	omap3-gta04.dtb \
-	omap3-igep0020.dtb \
-	omap3-igep0030.dtb \
-	omap3-zoom3.dtb \
+	omap3-overo-alto35.dtb \
+	omap3-overo-chestnut43.dtb \
+	omap3-overo-gallop43.dtb \
+	omap3-overo-palo43.dtb \
+	omap3-overo-storm-alto35.dtb \
+	omap3-overo-storm-chestnut43.dtb \
+	omap3-overo-storm-gallop43.dtb \
+	omap3-overo-storm-palo43.dtb \
+	omap3-overo-storm-summit.dtb \
+	omap3-overo-storm-tobi.dtb \
+	omap3-overo-summit.dtb \
+	omap3-overo-tobi.dtb \
+	omap3-sbc-t3517.dtb \
+	omap3-sbc-t3530.dtb \
+	omap3-sbc-t3730.dtb \
+	omap3-zoom3.dtb
+dtb-$(CONFIG_SOC_AM33XX) += am335x-base0033.dtb \
+	am335x-bone.dtb \
+	am335x-boneblack.dtb \
+	am335x-evm.dtb \
+	am335x-evmsk.dtb \
+	am335x-nano.dtb
+dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \
 	omap4-panda.dtb \
 	omap4-panda-a4.dtb \
 	omap4-panda-es.dtb \
-	omap4-var-som.dtb \
 	omap4-sdp.dtb \
 	omap4-sdp-es23plus.dtb \
-	omap5-uevm.dtb \
-	am335x-evm.dtb \
-	am335x-evmsk.dtb \
-	am335x-bone.dtb \
-	am335x-boneblack.dtb \
-	am335x-nano.dtb \
-	am335x-base0033.dtb \
-	am3517-evm.dtb \
-	am3517_mt_ventoux.dtb \
-	am43x-epos-evm.dtb \
-	dra7-evm.dtb
-dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
+	omap4-var-dvk-om44.dtb \
+	omap4-var-stk-om44.dtb
+dtb-$(CONFIG_SOC_AM43XX) += am43x-epos-evm.dtb \
+	am437x-gp-evm.dtb
+dtb-$(CONFIG_SOC_OMAP5) += omap5-cm-t54.dtb \
+	omap5-sbc-t54.dtb \
+	omap5-uevm.dtb
+dtb-$(CONFIG_SOC_DRA7XX) += dra7-evm.dtb \
+	dra72-evm.dtb
+dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \
+	orion5x-lacie-ethernet-disk-mini-v2.dtb \
+	orion5x-maxtor-shared-storage-2.dtb \
+	orion5x-rd88f5182-nas.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
-dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
-	ste-hrefprev60-stuib.dtb \
-	ste-hrefprev60-tvk.dtb \
-	ste-hrefv60plus-stuib.dtb \
-	ste-hrefv60plus-tvk.dtb \
-	ste-ccu8540.dtb \
-	ste-ccu9540.dtb
+dtb-$(CONFIG_ARCH_QCOM) += \
+	qcom-apq8064-ifc6410.dtb \
+	qcom-apq8074-dragonboard.dtb \
+	qcom-apq8084-mtp.dtb \
+	qcom-msm8660-surf.dtb \
+	qcom-msm8960-cdp.dtb
 dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
 dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \
 	s3c6410-smdk6410.dtb
-dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \
-	r7s72100-genmai.dtb \
-	r7s72100-genmai-reference.dtb \
+dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += r7s72100-genmai.dtb \
 	r8a7740-armadillo800eva.dtb \
 	r8a7778-bockw.dtb \
 	r8a7778-bockw-reference.dtb \
@@ -259,12 +336,14 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \
 	r8a73a4-ape6evm-reference.dtb \
 	sh7372-mackerel.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \
-	r7s72100-genmai-reference.dtb \
+	r7s72100-genmai.dtb \
+	r8a7791-henninger.dtb \
 	r8a7791-koelsch.dtb \
 	r8a7790-lager.dtb
 dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \
 	socfpga_cyclone5_socdk.dtb \
 	socfpga_cyclone5_sockit.dtb \
+	socfpga_cyclone5_socrates.dtb \
 	socfpga_vt.dtb
 dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \
 	spear1340-evb.dtb
@@ -273,21 +352,33 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
 	spear320-evb.dtb \
 	spear320-hmi.dtb
 dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
-dtb-$(CONFIG_ARCH_STI)+= stih415-b2000.dtb \
-	stih416-b2000.dtb \
+dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \
+	stih415-b2000.dtb \
 	stih415-b2020.dtb \
-	stih416-b2020.dtb
-dtb-$(CONFIG_ARCH_SUNXI) += \
+	stih416-b2000.dtb \
+	stih416-b2020.dtb \
+	stih416-b2020e.dtb
+dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-a1000.dtb \
 	sun4i-a10-cubieboard.dtb \
 	sun4i-a10-mini-xplus.dtb \
 	sun4i-a10-hackberry.dtb \
+	sun4i-a10-inet97fv2.dtb \
+	sun4i-a10-olinuxino-lime.dtb \
+	sun4i-a10-pcduino.dtb
+dtb-$(CONFIG_MACH_SUN5I) += \
 	sun5i-a10s-olinuxino-micro.dtb \
+	sun5i-a10s-r7-tv-dongle.dtb \
 	sun5i-a13-olinuxino.dtb \
-	sun5i-a13-olinuxino-micro.dtb \
+	sun5i-a13-olinuxino-micro.dtb
+dtb-$(CONFIG_MACH_SUN6I) += \
+	sun6i-a31-app4-evb1.dtb \
 	sun6i-a31-colombus.dtb \
+	sun6i-a31-m9.dtb
+dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-cubieboard2.dtb \
 	sun7i-a20-cubietruck.dtb \
+	sun7i-a20-i12-tvbox.dtb \
 	sun7i-a20-olinuxino-micro.dtb
 dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 	tegra20-iris-512.dtb \
@@ -302,11 +393,22 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 	tegra30-beaver.dtb \
 	tegra30-cardhu-a02.dtb \
 	tegra30-cardhu-a04.dtb \
+	tegra30-colibri-eval-v3.dtb \
 	tegra114-dalmore.dtb \
+	tegra114-roth.dtb \
+	tegra114-tn7.dtb \
+	tegra124-jetson-tk1.dtb \
 	tegra124-venice2.dtb
+dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb
+dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
+	ste-hrefprev60-stuib.dtb \
+	ste-hrefprev60-tvk.dtb \
+	ste-hrefv60plus-stuib.dtb \
+	ste-hrefv60plus-tvk.dtb \
+	ste-ccu8540.dtb \
+	ste-ccu9540.dtb
 dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \
 	versatile-pb.dtb
-dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
 	vexpress-v2p-ca9.dtb \
 	vexpress-v2p-ca15-tc1.dtb \
@@ -320,8 +422,31 @@ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
 dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \
 	zynq-zc706.dtb \
 	zynq-zed.dtb
+dtb-$(CONFIG_MACH_ARMADA_370) += \
+	armada-370-db.dtb \
+	armada-370-mirabox.dtb \
+	armada-370-netgear-rn102.dtb \
+	armada-370-netgear-rn104.dtb \
+	armada-370-rd.dtb
+dtb-$(CONFIG_MACH_ARMADA_375) += \
+	armada-375-db.dtb
+dtb-$(CONFIG_MACH_ARMADA_38X) += \
+	armada-385-db.dtb \
+	armada-385-rd.dtb
+dtb-$(CONFIG_MACH_ARMADA_XP) += \
+	armada-xp-axpwifiap.dtb \
+	armada-xp-db.dtb \
+	armada-xp-gp.dtb \
+	armada-xp-netgear-rn2120.dtb \
+	armada-xp-matrix.dtb \
+	armada-xp-openblocks-ax3-4.dtb
+dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \
+	dove-cubox.dtb \
+	dove-d2plug.dtb \
+	dove-d3plug.dtb \
+	dove-dove-db.dtb
 
-targets += dtbs
+targets += dtbs dtbs_install
 targets += $(dtb-y)
 endif
 
@@ -331,3 +456,5 @@ dtbs: $(addprefix $(obj)/, $(dtb-y))
 	$(Q)rm -f $(obj)/../*.dtb
 
 clean-files := *.dtb
+
+dtbs_install: $(addsuffix _dtbinst_, $(dtb-y))
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index e3f27ec3171..bde1777b62b 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -182,31 +182,31 @@
 
 &usb {
 	status = "okay";
+};
 
-	control@44e10000 {
-		status = "okay";
-	};
+&usb_ctrl_mod {
+	status = "okay";
+};
 
-	usb-phy@47401300 {
-		status = "okay";
-	};
+&usb0_phy {
+	status = "okay";
+};
 
-	usb-phy@47401b00 {
-		status = "okay";
-	};
+&usb1_phy {
+	status = "okay";
+};
 
-	usb@47401000 {
-		status = "okay";
-	};
+&usb0 {
+	status = "okay";
+};
 
-	usb@47401800 {
-		status = "okay";
-		dr_mode = "host";
-	};
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
 
-	dma-controller@07402000  {
-		status = "okay";
-	};
+&cppi41dma  {
+	status = "okay";
 };
 
 &i2c0 {
@@ -280,13 +280,14 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
-
+	status = "okay";
 };
 
 &davinci_mdio {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
 };
 
 &mmc1 {
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
index 6b71ad95a5c..305975d3f53 100644
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -26,7 +26,6 @@
 	pinctrl-0 = <&emmc_pins>;
 	bus-width = <8>;
 	status = "okay";
-	ti,vcc-aux-disable-is-sleep;
 };
 
 &am33xx_pinmux {
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 7e6c64ed966..e2156a583de 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -260,43 +260,49 @@
 		>;
 	};
 
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+		>;
+	};
+
 	lcd_pins_s0: lcd_pins_s0 {
 		pinctrl-single,pins = <
-			0x20 0x01	/* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */
-			0x24 0x01	/* gpmc_ad9.lcd_data17, OUTPUT | MODE1 */
-			0x28 0x01	/* gpmc_ad10.lcd_data18, OUTPUT | MODE1 */
-			0x2c 0x01	/* gpmc_ad11.lcd_data19, OUTPUT | MODE1 */
-			0x30 0x01	/* gpmc_ad12.lcd_data20, OUTPUT | MODE1 */
-			0x34 0x01	/* gpmc_ad13.lcd_data21, OUTPUT | MODE1 */
-			0x38 0x01	/* gpmc_ad14.lcd_data22, OUTPUT | MODE1 */
-			0x3c 0x01	/* gpmc_ad15.lcd_data23, OUTPUT | MODE1 */
-			0xa0 0x00	/* lcd_data0.lcd_data0, OUTPUT | MODE0 */
-			0xa4 0x00	/* lcd_data1.lcd_data1, OUTPUT | MODE0 */
-			0xa8 0x00	/* lcd_data2.lcd_data2, OUTPUT | MODE0 */
-			0xac 0x00	/* lcd_data3.lcd_data3, OUTPUT | MODE0 */
-			0xb0 0x00	/* lcd_data4.lcd_data4, OUTPUT | MODE0 */
-			0xb4 0x00	/* lcd_data5.lcd_data5, OUTPUT | MODE0 */
-			0xb8 0x00	/* lcd_data6.lcd_data6, OUTPUT | MODE0 */
-			0xbc 0x00	/* lcd_data7.lcd_data7, OUTPUT | MODE0 */
-			0xc0 0x00	/* lcd_data8.lcd_data8, OUTPUT | MODE0 */
-			0xc4 0x00	/* lcd_data9.lcd_data9, OUTPUT | MODE0 */
-			0xc8 0x00	/* lcd_data10.lcd_data10, OUTPUT | MODE0 */
-			0xcc 0x00	/* lcd_data11.lcd_data11, OUTPUT | MODE0 */
-			0xd0 0x00	/* lcd_data12.lcd_data12, OUTPUT | MODE0 */
-			0xd4 0x00	/* lcd_data13.lcd_data13, OUTPUT | MODE0 */
-			0xd8 0x00	/* lcd_data14.lcd_data14, OUTPUT | MODE0 */
-			0xdc 0x00	/* lcd_data15.lcd_data15, OUTPUT | MODE0 */
-			0xe0 0x00	/* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */
-			0xe4 0x00	/* lcd_hsync.lcd_hsync, OUTPUT | MODE0 */
-			0xe8 0x00	/* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */
-			0xec 0x00	/* lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */
+			0x20 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad8.lcd_data23 */
+			0x24 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad9.lcd_data22 */
+			0x28 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad10.lcd_data21 */
+			0x2c (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad11.lcd_data20 */
+			0x30 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad12.lcd_data19 */
+			0x34 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad13.lcd_data18 */
+			0x38 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad14.lcd_data17 */
+			0x3c (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad15.lcd_data16 */
+			0xa0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data0.lcd_data0 */
+			0xa4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data1.lcd_data1 */
+			0xa8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data2.lcd_data2 */
+			0xac (PIN_OUTPUT | MUX_MODE0)		/* lcd_data3.lcd_data3 */
+			0xb0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data4.lcd_data4 */
+			0xb4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data5.lcd_data5 */
+			0xb8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data6.lcd_data6 */
+			0xbc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data7.lcd_data7 */
+			0xc0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data8.lcd_data8 */
+			0xc4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data9.lcd_data9 */
+			0xc8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data10.lcd_data10 */
+			0xcc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data11.lcd_data11 */
+			0xd0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data12.lcd_data12 */
+			0xd4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data13.lcd_data13 */
+			0xd8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data14.lcd_data14 */
+			0xdc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data15.lcd_data15 */
+			0xe0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_vsync.lcd_vsync */
+			0xe4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_hsync.lcd_hsync */
+			0xe8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_pclk.lcd_pclk */
+			0xec (PIN_OUTPUT | MUX_MODE0)		/* lcd_ac_bias_en.lcd_ac_bias_en */
 		>;
 	};
 
 	am335x_evm_audio_pins: am335x_evm_audio_pins {
 		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rx_dv.mcasp1_aclkx */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_txd3.mcasp1_fsx */
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
 			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
 			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
 		>;
@@ -324,31 +330,31 @@
 
 &usb {
 	status = "okay";
+};
 
-	control@44e10000 {
-		status = "okay";
-	};
+&usb_ctrl_mod {
+	status = "okay";
+};
 
-	usb-phy@47401300 {
-		status = "okay";
-	};
+&usb0_phy {
+	status = "okay";
+};
 
-	usb-phy@47401b00 {
-		status = "okay";
-	};
+&usb1_phy {
+	status = "okay";
+};
 
-	usb@47401000 {
-		status = "okay";
-	};
+&usb0 {
+	status = "okay";
+};
 
-	usb@47401800 {
-		status = "okay";
-		dr_mode = "host";
-	};
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
 
-	dma-controller@07402000  {
-		status = "okay";
-	};
+&cppi41dma  {
+	status = "okay";
 };
 
 &i2c1 {
@@ -434,9 +440,9 @@
 	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
 	nand@0,0 {
 		reg = <0 0 0>; /* CS0, offset 0 */
-		nand-bus-width = <8>;
 		ti,nand-ecc-opt = "bch8";
-		gpmc,device-nand = "true";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <8>;
 		gpmc,device-width = <1>;
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
@@ -460,50 +466,51 @@
 		gpmc,wait-monitoring-ns = <0>;
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
-
+		/* MTD partition table */
+		/* All SPL-* partitions are sized to minimal length
+		 * which can be independently programmable. For
+		 * NAND flash this is equal to size of erase-block */
 		#address-cells = <1>;
 		#size-cells = <1>;
-		elm_id = <&elm>;
-
-		/* MTD partition table */
 		partition@0 {
-			label = "SPL1";
+			label = "NAND.SPL";
 			reg = <0x00000000 0x000020000>;
 		};
-
 		partition@1 {
-			label = "SPL2";
+			label = "NAND.SPL.backup1";
 			reg = <0x00020000 0x00020000>;
 		};
-
 		partition@2 {
-			label = "SPL3";
+			label = "NAND.SPL.backup2";
 			reg = <0x00040000 0x00020000>;
 		};
-
 		partition@3 {
-			label = "SPL4";
+			label = "NAND.SPL.backup3";
 			reg = <0x00060000 0x00020000>;
 		};
-
 		partition@4 {
-			label = "U-boot";
-			reg = <0x00080000 0x001e0000>;
+			label = "NAND.u-boot-spl";
+			reg = <0x00080000 0x00040000>;
 		};
-
 		partition@5 {
-			label = "environment";
-			reg = <0x00260000 0x00020000>;
+			label = "NAND.u-boot";
+			reg = <0x000C0000 0x00100000>;
 		};
-
 		partition@6 {
-			label = "Kernel";
-			reg = <0x00280000 0x00500000>;
+			label = "NAND.u-boot-env";
+			reg = <0x001C0000 0x00020000>;
 		};
-
 		partition@7 {
-			label = "File-System";
-			reg = <0x00780000 0x0F880000>;
+			label = "NAND.u-boot-env.backup1";
+			reg = <0x001E0000 0x00020000>;
+		};
+		partition@8 {
+			label = "NAND.kernel";
+			reg = <0x00200000 0x00800000>;
+		};
+		partition@9 {
+			label = "NAND.file-system";
+			reg = <0x00A00000 0x0F600000>;
 		};
 	};
 };
@@ -522,8 +529,8 @@
 		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
 			0 0 1 2
 		>;
-		tx-num-evt = <1>;
-		rx-num-evt = <1>;
+		tx-num-evt = <32>;
+		rx-num-evt = <32>;
 };
 
 &tps {
@@ -607,12 +614,14 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
 };
 
 &davinci_mdio {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
 };
 
 &cpsw_emac0 {
@@ -643,6 +652,9 @@
 	status = "okay";
 	vmmc-supply = <&vmmc_reg>;
 	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 };
 
 &sham {
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 4718ec4a4db..80a3b215e7d 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -45,6 +45,29 @@
 		regulator-boot-on;
 	};
 
+	wl12xx_vmmc: fixedregulator@2 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio1 29 0>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	vtt_fixed: fixedregulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+	};
+
 	leds {
 		pinctrl-names = "default";
 		pinctrl-0 = <&user_leds_s0>;
@@ -121,7 +144,7 @@
 		ti,model = "AM335x-EVMSK";
 		ti,audio-codec = <&tlv320aic3106>;
 		ti,mcasp-controller = <&mcasp1>;
-		ti,codec-clock-rate = <24576000>;
+		ti,codec-clock-rate = <24000000>;
 		ti,audio-routing =
 			"Headphone Jack",       "HPLOUT",
 			"Headphone Jack",       "HPROUT";
@@ -256,6 +279,12 @@
 		>;
 	};
 
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+		>;
+	};
+
 	mcasp1_pins: mcasp1_pins {
 		pinctrl-single,pins = <
 			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
@@ -264,6 +293,24 @@
 			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
 		>;
 	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
+			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+		>;
+	};
+
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
+		>;
+	};
 };
 
 &uart0 {
@@ -327,18 +374,31 @@
 
 &usb {
 	status = "okay";
+};
 
-	control@44e10000 {
-		status = "okay";
-	};
+&usb_ctrl_mod {
+	status = "okay";
+};
 
-	usb-phy@47401300 {
-		status = "okay";
-	};
+&usb0_phy {
+	status = "okay";
+};
 
-	usb@47401000 {
-		status = "okay";
-	};
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&cppi41dma  {
+	status = "okay";
 };
 
 &epwmss2 {
@@ -434,28 +494,36 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
+	dual_emac = <1>;
+	status = "okay";
 };
 
 &davinci_mdio {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
 };
 
 &cpsw_emac0 {
 	phy_id = <&davinci_mdio>, <0>;
 	phy-mode = "rgmii-txid";
+	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
 	phy_id = <&davinci_mdio>, <1>;
 	phy-mode = "rgmii-txid";
+	dual_emac_res_vlan = <2>;
 };
 
 &mmc1 {
 	status = "okay";
 	vmmc-supply = <&vmmc_reg>;
 	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 };
 
 &sham {
@@ -470,6 +538,16 @@
 	ti,no-reset-on-init;
 };
 
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&wl12xx_vmmc>;
+	ti,non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+};
+
 &mcasp1 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&mcasp1_pins>;
@@ -482,8 +560,8 @@
 		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
 			0 0 1 2
 		>;
-		tx-num-evt = <1>;
-		rx-num-evt = <1>;
+		tx-num-evt = <32>;
+		rx-num-evt = <32>;
 };
 
 &tscadc {
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
index 7063311a58d..a1a0cc5eb35 100644
--- a/arch/arm/boot/dts/am335x-igep0033.dtsi
+++ b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -95,12 +95,26 @@
 	};
 };
 
+&mac {
+	status = "okay";
+};
+
+&davinci_mdio {
+	status = "okay";
+};
+
 &cpsw_emac0 {
 	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rmii";
 };
 
 &cpsw_emac1 {
 	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rmii";
+};
+
+&phy_sel {
+	rmii-clock-ext;
 };
 
 &elm {
@@ -118,7 +132,6 @@
 		reg = <0 0 0>; /* CS0, offset 0 */
 		nand-bus-width = <8>;
 		ti,nand-ecc-opt = "bch8";
-		gpmc,device-nand = "true";
 		gpmc,device-width = <1>;
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
@@ -201,31 +214,31 @@
 
 &usb {
 	status = "okay";
+};
 
-	control@44e10000 {
-		status = "okay";
-	};
+&usb_ctrl_mod {
+	status = "okay";
+};
 
-	usb-phy@47401300 {
-		status = "okay";
-	};
+&usb0_phy {
+	status = "okay";
+};
 
-	usb-phy@47401b00 {
-		status = "okay";
-	};
+&usb1_phy {
+	status = "okay";
+};
 
-	usb@47401000 {
-		status = "okay";
-	};
+&usb0 {
+	status = "okay";
+};
 
-	usb@47401800 {
-		status = "okay";
-		dr_mode = "host";
-	};
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
 
-	dma-controller@07402000  {
-		status = "okay";
-	};
+&cppi41dma  {
+	status = "okay";
 };
 
 #include "tps65910.dtsi"
diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts
index 9907b494b99..a3466455b17 100644
--- a/arch/arm/boot/dts/am335x-nano.dts
+++ b/arch/arm/boot/dts/am335x-nano.dts
@@ -344,6 +344,11 @@
 
 &mac {
 	dual_emac = <1>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	status = "okay";
 };
 
 &cpsw_emac0 {
diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi
index 9ccfe508dea..712edce7d6f 100644
--- a/arch/arm/boot/dts/am33xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am33xx-clocks.dtsi
@@ -96,47 +96,29 @@
 		clock-div = <1>;
 	};
 
-	ehrpwm0_gate_tbclk: ehrpwm0_gate_tbclk {
+	ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 {
 		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
+		compatible = "ti,gate-clock";
 		clocks = <&dpll_per_m2_ck>;
 		ti,bit-shift = <0>;
 		reg = <0x0664>;
 	};
 
-	ehrpwm0_tbclk: ehrpwm0_tbclk {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&ehrpwm0_gate_tbclk>;
-	};
-
-	ehrpwm1_gate_tbclk: ehrpwm1_gate_tbclk {
+	ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 {
 		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
+		compatible = "ti,gate-clock";
 		clocks = <&dpll_per_m2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x0664>;
 	};
 
-	ehrpwm1_tbclk: ehrpwm1_tbclk {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&ehrpwm1_gate_tbclk>;
-	};
-
-	ehrpwm2_gate_tbclk: ehrpwm2_gate_tbclk {
+	ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 {
 		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
+		compatible = "ti,gate-clock";
 		clocks = <&dpll_per_m2_ck>;
 		ti,bit-shift = <2>;
 		reg = <0x0664>;
 	};
-
-	ehrpwm2_tbclk: ehrpwm2_tbclk {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&ehrpwm2_gate_tbclk>;
-	};
 };
 &prcm_clocks {
 	clk_32768_ck: clk_32768_ck {
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 6d95d3df33c..4a4e02d0ce9 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -58,6 +58,10 @@
 				275000  1125000
 			>;
 			voltage-tolerance = <2>; /* 2 percentage */
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
 			clock-latency = <300000>; /* From omap-cpufreq driver */
 		};
 	};
@@ -68,7 +72,7 @@
 	};
 
 	/*
-	 * The soc node represents the soc top level view. It is uses for IPs
+	 * The soc node represents the soc top level view. It is used for IPs
 	 * that are not memory mapped in the MPU view or for the MPU itself.
 	 */
 	soc {
@@ -90,8 +94,8 @@
 
 	/*
 	 * XXX: Use a flat representation of the AM33XX interconnect.
-	 * The real AM33XX interconnect network is quite complex.Since
-	 * that will not bring real advantage to represent that in DT
+	 * The real AM33XX interconnect network is quite complex. Since
+	 * it will not bring real advantage to represent that in DT
 	 * for the moment, just use a fake OCP bus entry to represent
 	 * the whole bus hierarchy.
 	 */
@@ -140,12 +144,9 @@
 			compatible = "ti,edma3";
 			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
 			reg =	<0x49000000 0x10000>,
-				<0x44e10f90 0x10>;
+				<0x44e10f90 0x40>;
 			interrupts = <12 13 14>;
 			#dma-cells = <1>;
-			dma-channels = <64>;
-			ti,edma-regions = <4>;
-			ti,edma-slots = <256>;
 		};
 
 		gpio0: gpio@44e07000 {
@@ -318,6 +319,7 @@
 			compatible = "ti,omap4-hwspinlock";
 			reg = <0x480ca000 0x1000>;
 			ti,hwmods = "spinlock";
+			#hwlock-cells = <1>;
 		};
 
 		wdt2: wdt@44e35000 {
@@ -399,7 +401,7 @@
 			ti,timer-pwm;
 		};
 
-		rtc@44e3e000 {
+		rtc: rtc@44e3e000 {
 			compatible = "ti,da830-rtc";
 			reg = <0x44e3e000 0x1000>;
 			interrupts = <75
@@ -448,7 +450,7 @@
 			ti,hwmods = "usb_otg_hs";
 			status = "disabled";
 
-			usb_ctrl_mod: control@44e10000 {
+			usb_ctrl_mod: control@44e10620 {
 				compatible = "ti,am335x-usb-ctrl-module";
 				reg = <0x44e10620 0x10
 					0x44e10648 0x4>;
@@ -551,7 +553,7 @@
 					"tx14", "tx15";
 			};
 
-			cppi41dma: dma-controller@07402000 {
+			cppi41dma: dma-controller@47402000 {
 				compatible = "ti,am3359-cppi41";
 				reg =  <0x47400000 0x1000
 					0x47402000 0x1000
@@ -582,6 +584,8 @@
 				compatible = "ti,am33xx-ecap";
 				#pwm-cells = <3>;
 				reg = <0x48300100 0x80>;
+				interrupts = <31>;
+				interrupt-names = "ecap0";
 				ti,hwmods = "ecap0";
 				status = "disabled";
 			};
@@ -610,6 +614,8 @@
 				compatible = "ti,am33xx-ecap";
 				#pwm-cells = <3>;
 				reg = <0x48302100 0x80>;
+				interrupts = <47>;
+				interrupt-names = "ecap1";
 				ti,hwmods = "ecap1";
 				status = "disabled";
 			};
@@ -638,6 +644,8 @@
 				compatible = "ti,am33xx-ecap";
 				#pwm-cells = <3>;
 				reg = <0x48304100 0x80>;
+				interrupts = <61>;
+				interrupt-names = "ecap2";
 				ti,hwmods = "ecap2";
 				status = "disabled";
 			};
@@ -654,6 +662,8 @@
 		mac: ethernet@4a100000 {
 			compatible = "ti,cpsw";
 			ti,hwmods = "cpgmac0";
+			clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
+			clock-names = "fck", "cpts";
 			cpdma_channels = <8>;
 			ale_entries = <1024>;
 			bd_ram_size = <0x2000>;
@@ -677,6 +687,7 @@
 			 */
 			interrupts = <40 41 42 43>;
 			ranges;
+			status = "disabled";
 
 			davinci_mdio: mdio@4a101000 {
 				compatible = "ti,davinci_mdio";
@@ -685,6 +696,7 @@
 				ti,hwmods = "davinci_mdio";
 				bus_freq = <1000000>;
 				reg = <0x4a101000 0x100>;
+				status = "disabled";
 			};
 
 			cpsw_emac0: slave@4a100200 {
@@ -791,7 +803,7 @@
 			      <0x46000000 0x400000>;
 			reg-names = "mpu", "dat";
 			interrupts = <80>, <81>;
-			interrupts-names = "tx", "rx";
+			interrupt-names = "tx", "rx";
 			status = "disabled";
 			dmas = <&edma 8>,
 				<&edma 9>;
@@ -805,7 +817,7 @@
 			      <0x46400000 0x400000>;
 			reg-names = "mpu", "dat";
 			interrupts = <82>, <83>;
-			interrupts-names = "tx", "rx";
+			interrupt-names = "tx", "rx";
 			status = "disabled";
 			dmas = <&edma 10>,
 				<&edma 11>;
diff --git a/arch/arm/boot/dts/am3517-craneboard.dts b/arch/arm/boot/dts/am3517-craneboard.dts
new file mode 100644
index 00000000000..2d40b3f241c
--- /dev/null
+++ b/arch/arm/boot/dts/am3517-craneboard.dts
@@ -0,0 +1,174 @@
+/*
+ * See craneboard.org for more details
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am3517.dtsi"
+
+/ {
+	model = "TI AM3517 CraneBoard (TMDSEVM3517)";
+	compatible = "ti,am3517-craneboard", "ti,am3517", "ti,omap3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;	/* 256 MB */
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+};
+
+&davinci_emac {
+	status = "okay";
+};
+
+&davinci_mdio {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	/* goes to expansion connector */
+	status = "disabled";
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	/* goes to expansion connector */
+	status = "disabled";
+};
+
+&mmc1 {
+	vmmc-supply = <&vdd2_reg>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	/* goes to expansion connector */
+	status = "disabled";
+};
+
+&mmc3 {
+	/* goes to expansion connector */
+	status = "disabled";
+};
+
+#include "tps65910.dtsi"
+
+&omap3_pmx_core {
+	tps_pins: pinmux_tps_pins {
+		pinctrl-single,pins = <
+			0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */
+		>;
+	};
+};
+
+&tps {
+	pinctrl-names = "default";
+	pinctrl-0 = <&tps_pins>;
+
+	interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+	interrupt-parent = <&intc>;
+
+	ti,en-ck32k-xtal;
+
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		/*
+		 * Unused:
+		 * VDIG1=2.7V,300mA max
+		 * VDIG2=1.8V,300mA max
+		 */
+
+		vpll_reg: regulator@7 {
+			/* VDDS_DPLL_1V8 */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			/* VDDS_SRAM_1V8 */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			/* VDDA1P8V_USBPHY */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		/* VAUX33 unused */
+
+		vdac_reg: regulator@8 {
+			/* VDDA_DAC_1V8 */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			/* VDDA3P3V_USBPHY */
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_CORE */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDDSHV_3V3 */
+			regulator-name = "vdd_shv";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		/* VDD3 unused */
+	};
+};
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
index 788391f9168..5a452fdd7c5 100644
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -62,5 +62,21 @@
 	};
 };
 
+&iva {
+	status = "disabled";
+};
+
+&mailbox {
+	status = "disabled";
+};
+
+&mmu_isp {
+	status = "disabled";
+};
+
+&smartreflex_mpu_iva {
+	status = "disabled";
+};
+
 /include/ "am35xx-clocks.dtsi"
 /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index c6bd4d986c2..49fa5962225 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -8,6 +8,7 @@
  * kind, whether express or implied.
  */
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 #include "skeleton.dtsi"
@@ -33,6 +34,11 @@
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <0>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
 		};
 	};
 
@@ -61,11 +67,15 @@
 	};
 
 	ocp {
-		compatible = "simple-bus";
+		compatible = "ti,am4372-l3-noc", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
 		ti,hwmods = "l3_main";
+		reg = <0x44000000 0x400000
+		       0x44800000 0x400000>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 
 		prcm: prcm@44df0000 {
 			compatible = "ti,am4-prcm";
@@ -102,9 +112,6 @@
 					<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
-			dma-channels = <64>;
-			ti,edma-regions = <4>;
-			ti,edma-slots = <256>;
 		};
 
 		uart0: serial@44e09000 {
@@ -351,6 +358,13 @@
 			status = "disabled";
 		};
 
+		hwspinlock: spinlock@480ca000 {
+			compatible = "ti,omap4-hwspinlock";
+			reg = <0x480ca000 0x1000>;
+			ti,hwmods = "spinlock";
+			#hwlock-cells = <1>;
+		};
+
 		i2c0: i2c@44e0b000 {
 			compatible = "ti,am4372-i2c","ti,omap4-i2c";
 			reg = <0x44e0b000 0x1000>;
@@ -476,6 +490,8 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ti,hwmods = "cpgmac0";
+			clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
+			clock-names = "fck", "cpts";
 			status = "disabled";
 			cpdma_channels = <8>;
 			ale_entries = <1024>;
@@ -508,6 +524,12 @@
 				/* Filled in by U-Boot */
 				mac-address = [ 00 00 00 00 00 00 ];
 			};
+
+			phy_sel: cpsw-phy-sel@44e10650 {
+				compatible = "ti,am43xx-cpsw-phy-sel";
+				reg= <0x44e10650 0x4>;
+				reg-names = "gmii-sel";
+			};
 		};
 
 		epwmss0: epwmss@48300000 {
@@ -521,6 +543,7 @@
 
 			ecap0: ecap@48300100 {
 				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				#pwm-cells = <3>;
 				reg = <0x48300100 0x80>;
 				ti,hwmods = "ecap0";
 				status = "disabled";
@@ -528,6 +551,7 @@
 
 			ehrpwm0: ehrpwm@48300200 {
 				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
 				reg = <0x48300200 0x80>;
 				ti,hwmods = "ehrpwm0";
 				status = "disabled";
@@ -545,6 +569,7 @@
 
 			ecap1: ecap@48302100 {
 				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				#pwm-cells = <3>;
 				reg = <0x48302100 0x80>;
 				ti,hwmods = "ecap1";
 				status = "disabled";
@@ -552,6 +577,7 @@
 
 			ehrpwm1: ehrpwm@48302200 {
 				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
 				reg = <0x48302200 0x80>;
 				ti,hwmods = "ehrpwm1";
 				status = "disabled";
@@ -569,6 +595,7 @@
 
 			ecap2: ecap@48304100 {
 				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				#pwm-cells = <3>;
 				reg = <0x48304100 0x80>;
 				ti,hwmods = "ecap2";
 				status = "disabled";
@@ -576,6 +603,7 @@
 
 			ehrpwm2: ehrpwm@48304200 {
 				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
 				reg = <0x48304200 0x80>;
 				ti,hwmods = "ehrpwm2";
 				status = "disabled";
@@ -593,6 +621,7 @@
 
 			ehrpwm3: ehrpwm@48306200 {
 				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
 				reg = <0x48306200 0x80>;
 				ti,hwmods = "ehrpwm3";
 				status = "disabled";
@@ -610,6 +639,7 @@
 
 			ehrpwm4: ehrpwm@48308200 {
 				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
 				reg = <0x48308200 0x80>;
 				ti,hwmods = "ehrpwm4";
 				status = "disabled";
@@ -627,6 +657,7 @@
 
 			ehrpwm5: ehrpwm@4830a200 {
 				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
 				reg = <0x4830a200 0x80>;
 				ti,hwmods = "ehrpwm5";
 				status = "disabled";
@@ -669,7 +700,7 @@
 			      <0x46000000 0x400000>;
 			reg-names = "mpu", "dat";
 			interrupts = <80>, <81>;
-			interrupts-names = "tx", "rx";
+			interrupt-names = "tx", "rx";
 			status = "disabled";
 			dmas = <&edma 8>,
 			       <&edma 9>;
@@ -683,12 +714,180 @@
 			      <0x46400000 0x400000>;
 			reg-names = "mpu", "dat";
 			interrupts = <82>, <83>;
-			interrupts-names = "tx", "rx";
+			interrupt-names = "tx", "rx";
 			status = "disabled";
 			dmas = <&edma 10>,
 			       <&edma 11>;
 			dma-names = "tx", "rx";
 		};
+
+		elm: elm@48080000 {
+			compatible = "ti,am3352-elm";
+			reg = <0x48080000 0x2000>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "elm";
+			clocks = <&l4ls_gclk>;
+			clock-names = "fck";
+			status = "disabled";
+		};
+
+		gpmc: gpmc@50000000 {
+			compatible = "ti,am3352-gpmc";
+			ti,hwmods = "gpmc";
+			clocks = <&l3s_gclk>;
+			clock-names = "fck";
+			reg = <0x50000000 0x2000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			gpmc,num-cs = <7>;
+			gpmc,num-waitpins = <2>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			status = "disabled";
+		};
+
+		am43xx_control_usb2phy1: control-phy@44e10620 {
+			compatible = "ti,control-phy-usb2-am437";
+			reg = <0x44e10620 0x4>;
+			reg-names = "power";
+		};
+
+		am43xx_control_usb2phy2: control-phy@0x44e10628 {
+			compatible = "ti,control-phy-usb2-am437";
+			reg = <0x44e10628 0x4>;
+			reg-names = "power";
+		};
+
+		ocp2scp0: ocp2scp@483a8000 {
+			compatible = "ti,omap-ocp2scp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "ocp2scp0";
+
+			usb2_phy1: phy@483a8000 {
+				compatible = "ti,am437x-usb2";
+				reg = <0x483a8000 0x8000>;
+				ctrl-module = <&am43xx_control_usb2phy1>;
+				clocks = <&usb_phy0_always_on_clk32k>,
+					 <&usb_otg_ss0_refclk960m>;
+				clock-names = "wkupclk", "refclk";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		ocp2scp1: ocp2scp@483e8000 {
+			compatible = "ti,omap-ocp2scp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "ocp2scp1";
+
+			usb2_phy2: phy@483e8000 {
+				compatible = "ti,am437x-usb2";
+				reg = <0x483e8000 0x8000>;
+				ctrl-module = <&am43xx_control_usb2phy2>;
+				clocks = <&usb_phy1_always_on_clk32k>,
+					 <&usb_otg_ss1_refclk960m>;
+				clock-names = "wkupclk", "refclk";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		dwc3_1: omap_dwc3@48380000 {
+			compatible = "ti,am437x-dwc3";
+			ti,hwmods = "usb_otg_ss0";
+			reg = <0x48380000 0x10000>;
+			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <1>;
+			ranges;
+
+			usb1: usb@48390000 {
+				compatible = "synopsys,dwc3";
+				reg = <0x48390000 0x17000>;
+				interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy1>;
+				phy-names = "usb2-phy";
+				maximum-speed = "high-speed";
+				dr_mode = "otg";
+				status = "disabled";
+			};
+		};
+
+		dwc3_2: omap_dwc3@483c0000 {
+			compatible = "ti,am437x-dwc3";
+			ti,hwmods = "usb_otg_ss1";
+			reg = <0x483c0000 0x10000>;
+			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <1>;
+			ranges;
+
+			usb2: usb@483d0000 {
+				compatible = "synopsys,dwc3";
+				reg = <0x483d0000 0x17000>;
+				interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy2>;
+				phy-names = "usb2-phy";
+				maximum-speed = "high-speed";
+				dr_mode = "otg";
+				status = "disabled";
+			};
+		};
+
+		qspi: qspi@47900000 {
+			compatible = "ti,am4372-qspi";
+			reg = <0x47900000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "qspi";
+			interrupts = <0 138 0x4>;
+			num-cs = <4>;
+			status = "disabled";
+		};
+
+		hdq: hdq@48347000 {
+			compatible = "ti,am43xx-hdq";
+			reg = <0x48347000 0x1000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&func_12m_clk>;
+			clock-names = "fck";
+			ti,hwmods = "hdq1w";
+			status = "disabled";
+		};
+
+		dss: dss@4832a000 {
+			compatible = "ti,omap3-dss";
+			reg = <0x4832a000 0x200>;
+			status = "disabled";
+			ti,hwmods = "dss_core";
+			clocks = <&disp_clk>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			dispc@4832a400 {
+				compatible = "ti,omap3-dispc";
+				reg = <0x4832a400 0x400>;
+				interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+				ti,hwmods = "dss_dispc";
+				clocks = <&disp_clk>;
+				clock-names = "fck";
+			};
+
+			rfbi: rfbi@4832a800 {
+				compatible = "ti,omap3-rfbi";
+				reg = <0x4832a800 0x100>;
+				ti,hwmods = "dss_rfbi";
+				clocks = <&disp_clk>;
+				clock-names = "fck";
+			};
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
new file mode 100644
index 00000000000..003766c47bb
--- /dev/null
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -0,0 +1,458 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* AM437x GP EVM */
+
+/dts-v1/;
+
+#include "am4372.dtsi"
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "TI AM437x GP EVM";
+	compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43";
+
+	aliases {
+		display0 = &lcd0;
+	};
+
+	vmmcsd_fixed: fixedregulator-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+	};
+
+	vtt_fixed: fixedregulator-vtt {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+
+	matrix_keypad: matrix_keypad@0 {
+		compatible = "gpio-matrix-keypad";
+		debounce-delay-ms = <5>;
+		col-scan-delay-us = <2>;
+
+		row-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH /* Bank3, pin21 */
+				&gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */
+				&gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */
+
+		col-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH /* Bank3, pin19 */
+				&gpio3 20 GPIO_ACTIVE_HIGH>; /* Bank3, pin20 */
+
+		linux,keymap = <0x00000201      /* P1 */
+				0x00010202      /* P2 */
+				0x01000067      /* UP */
+				0x0101006a      /* RIGHT */
+				0x02000069      /* LEFT */
+				0x0201006c>;      /* DOWN */
+		};
+
+	lcd0: display {
+		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+		label = "lcd";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+
+		/*
+		 * SelLCDorHDMI, LOW to select HDMI. This is not really the
+		 * panel's enable GPIO, but we don't have HDMI driver support nor
+		 * support to switch between two displays, so using this gpio as
+		 * panel's enable should be safe.
+		 */
+		enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+
+		panel-timing {
+			clock-frequency = <33000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <210>;
+			hback-porch = <16>;
+			hsync-len = <30>;
+			vback-porch = <10>;
+			vfront-porch = <22>;
+			vsync-len = <13>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+};
+
+&am43xx_pinmux {
+	i2c0_pins: i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	i2c1_pins: i2c1_pins {
+		pinctrl-single,pins = <
+			0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
+			0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+		>;
+	};
+
+	ecap0_pins: backlight_pins {
+		pinctrl-single,pins = <
+			0x164 MUX_MODE0       /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+		>;
+	};
+
+	pixcir_ts_pins: pixcir_ts_pins {
+		pinctrl-single,pins = <
+			0x264 (PIN_INPUT_PULLUP | MUX_MODE7)  /* spi2_d0.gpio3_22 */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_txen */
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rxctl */
+			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd3 */
+			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd2 */
+			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd1 */
+			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd0 */
+			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd3 */
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd2 */
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	nand_flash_x8: nand_flash_x8 {
+		pinctrl-single,pins = <
+			0x26c(PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* spi2_cs0.gpio/eMMCorNANDsel */
+			0x0  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			0x4  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			0x8  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			0xc  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			0x10 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			0x14 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			0x18 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			0x1c (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
+			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+		>;
+	};
+
+	dss_pins: dss_pins {
+		pinctrl-single,pins = <
+			0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+			0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+			0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+			0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+			0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+			0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+			0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+			0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+
+		>;
+	};
+
+	lcd_pins: lcd_pins {
+		pinctrl-single,pins = <
+			/* GPIO 5_8 to select LCD / HDMI */
+			0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
+		>;
+	};
+};
+
+&i2c0 {
+        status = "okay";
+        pinctrl-names = "default";
+        pinctrl-0 = <&i2c0_pins>;
+};
+
+&i2c1 {
+        status = "okay";
+        pinctrl-names = "default";
+        pinctrl-0 = <&i2c1_pins>;
+
+	pixcir_ts@5c {
+		compatible = "pixcir,pixcir_tangoc";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pixcir_ts_pins>;
+		reg = <0x5c>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <22 0>;
+
+		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+
+		x-size = <1024>;
+		y-size = <600>;
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&ecap0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ecap0_pins>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&gpio4 {
+	status = "okay";
+};
+
+&gpio5 {
+	status = "okay";
+	ti,no-reset-on-init;
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+};
+
+&usb2_phy1 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb2_phy2 {
+	status = "okay";
+};
+
+&usb2 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&mac {
+	slaves = <1>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rgmii";
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_flash_x8>;
+	ranges = <0 0 0 0x01000000>;	/* minimum GPMC partition = 16MB */
+	nand@0,0 {
+		reg = <0 0 4>;		/* device IO registers */
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <40>;
+		gpmc,cs-wr-off-ns = <40>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <25>;
+		gpmc,adv-wr-off-ns = <25>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <20>;
+		gpmc,oe-on-ns = <3>;
+		gpmc,oe-off-ns = <30>;
+		gpmc,access-ns = <30>;
+		gpmc,rd-cycle-ns = <40>;
+		gpmc,wr-cycle-ns = <40>;
+		gpmc,wait-pin = <0>;
+		gpmc,wait-on-read;
+		gpmc,wait-on-write;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		/* MTD partition table */
+		/* All SPL-* partitions are sized to minimal length
+		 * which can be independently programmable. For
+		 * NAND flash this is equal to size of erase-block */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "NAND.SPL";
+			reg = <0x00000000 0x00040000>;
+		};
+		partition@1 {
+			label = "NAND.SPL.backup1";
+			reg = <0x00040000 0x00040000>;
+		};
+		partition@2 {
+			label = "NAND.SPL.backup2";
+			reg = <0x00080000 0x00040000>;
+		};
+		partition@3 {
+			label = "NAND.SPL.backup3";
+			reg = <0x000c0000 0x00040000>;
+		};
+		partition@4 {
+			label = "NAND.u-boot-spl-os";
+			reg = <0x00100000 0x00080000>;
+		};
+		partition@5 {
+			label = "NAND.u-boot";
+			reg = <0x00180000 0x00100000>;
+		};
+		partition@6 {
+			label = "NAND.u-boot-env";
+			reg = <0x00280000 0x00040000>;
+		};
+		partition@7 {
+			label = "NAND.u-boot-env.backup1";
+			reg = <0x002c0000 0x00040000>;
+		};
+		partition@8 {
+			label = "NAND.kernel";
+			reg = <0x00300000 0x00700000>;
+		};
+		partition@9 {
+			label = "NAND.file-system";
+			reg = <0x00a00000 0x1f600000>;
+		};
+	};
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_pins>;
+
+	port {
+		dpi_out: endpoint@0 {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index fbf9c4c7a94..90098f98a5c 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -13,11 +13,16 @@
 #include "am4372.dtsi"
 #include <dt-bindings/pinctrl/am43xx.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "TI AM43x EPOS EVM";
 	compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43";
 
+	aliases {
+		display0 = &lcd0;
+	};
+
 	vmmcsd_fixed: fixedregulator-sd {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
@@ -26,6 +31,44 @@
 		enable-active-high;
 	};
 
+	lcd0: display {
+		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+		label = "lcd";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+
+		/*
+		 * SelLCDorHDMI, LOW to select HDMI. This is not really the
+		 * panel's enable GPIO, but we don't have HDMI driver support nor
+		 * support to switch between two displays, so using this gpio as
+		 * panel's enable should be safe.
+		 */
+		enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+
+		panel-timing {
+			clock-frequency = <33000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <210>;
+			hback-porch = <16>;
+			hsync-len = <30>;
+			vback-porch = <10>;
+			vfront-porch = <22>;
+			vsync-len = <13>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+
 	am43xx_pinmux: pinmux@44e10800 {
 		cpsw_default: cpsw_default {
 			pinctrl-single,pins = <
@@ -79,6 +122,127 @@
 				0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 			>;
 		};
+
+		nand_flash_x8: nand_flash_x8 {
+			pinctrl-single,pins = <
+				0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a0.SELQSPIorNAND/GPIO */
+				0x0  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+				0x4  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+				0x8  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+				0xc  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+				0x10 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+				0x14 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+				0x18 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+				0x1c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+				0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+				0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
+				0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+				0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+				0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+				0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+				0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+			>;
+		};
+
+		ecap0_pins: backlight_pins {
+			pinctrl-single,pins = <
+				0x164 MUX_MODE0         /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+			>;
+		};
+
+		i2c2_pins: pinmux_i2c2_pins {
+			pinctrl-single,pins = <
+				0x1c0 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_sda.i2c2_sda */
+				0x1c4 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_scl.i2c2_scl */
+			>;
+		};
+
+		spi0_pins: pinmux_spi0_pins {
+			pinctrl-single,pins = <
+				0x150 (PIN_INPUT | MUX_MODE0)           /* spi0_clk.spi0_clk */
+				0x154 (PIN_OUTPUT | MUX_MODE0)           /* spi0_d0.spi0_d0 */
+				0x158 (PIN_INPUT | MUX_MODE0)           /* spi0_d1.spi0_d1 */
+				0x15c (PIN_OUTPUT | MUX_MODE0)          /* spi0_cs0.spi0_cs0 */
+			>;
+		};
+
+		spi1_pins: pinmux_spi1_pins {
+			pinctrl-single,pins = <
+				0x190 (PIN_INPUT | MUX_MODE3)           /* mcasp0_aclkx.spi1_clk */
+				0x194 (PIN_OUTPUT | MUX_MODE3)           /* mcasp0_fsx.spi1_d0 */
+				0x198 (PIN_INPUT | MUX_MODE3)           /* mcasp0_axr0.spi1_d1 */
+				0x19c (PIN_OUTPUT | MUX_MODE3)          /* mcasp0_ahclkr.spi1_cs0 */
+			>;
+		};
+
+		mmc1_pins: pinmux_mmc1_pins {
+			pinctrl-single,pins = <
+				0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			>;
+		};
+
+		qspi1_default: qspi1_default {
+			pinctrl-single,pins = <
+				0x7c (PIN_INPUT_PULLUP | MUX_MODE3)
+				0x88 (PIN_INPUT_PULLUP | MUX_MODE2)
+				0x90 (PIN_INPUT_PULLUP | MUX_MODE3)
+				0x94 (PIN_INPUT_PULLUP | MUX_MODE3)
+				0x98 (PIN_INPUT_PULLUP | MUX_MODE3)
+				0x9c (PIN_INPUT_PULLUP | MUX_MODE3)
+			>;
+		};
+
+		pixcir_ts_pins: pixcir_ts_pins {
+			pinctrl-single,pins = <
+				0x44 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a1.gpio1_17 */
+			>;
+		};
+
+		hdq_pins: pinmux_hdq_pins {
+			pinctrl-single,pins = <
+				0x234 (PIN_INPUT_PULLUP | MUX_MODE1)    /* cam1_wen.hdq_gpio */
+			>;
+		};
+
+		dss_pins: dss_pins {
+			pinctrl-single,pins = <
+				0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+				0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+				0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+				0x02C (PIN_OUTPUT_PULLUP | MUX_MODE1)
+				0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+				0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+				0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+				0x03C (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+				0x0A0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+				0x0A4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0A8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0AC (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0B0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0B4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0B8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0BC (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0C0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0C4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0C8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0CC (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0D0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0D4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0D8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0DC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+				0x0E0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+				0x0E4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+				0x0E8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+				0x0EC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+			>;
+		};
+
+		lcd_pins: lcd_pins {
+			pinctrl-single,pins = <
+				/* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */
+				0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7)
+			>;
+		};
 	};
 
 	matrix_keypad: matrix_keypad@0 {
@@ -113,12 +277,22 @@
 				0x0203006c	/* DOWN */
 				0x03030069>;	/* LEFT */
 		};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
 };
 
 &mmc1 {
 	status = "okay";
 	vmmc-supply = <&vmmcsd_fixed>;
 	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 };
 
 &mac {
@@ -145,6 +319,10 @@
 	phy-mode = "rmii";
 };
 
+&phy_sel {
+	rmii-clock-ext;
+};
+
 &i2c0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -157,7 +335,9 @@
 	};
 
 	pixcir_ts@5c {
-		compatible = "pixcir,pixcir_ts";
+		compatible = "pixcir,pixcir_tangoc";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pixcir_ts_pins>;
 		reg = <0x5c>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <17 0>;
@@ -165,10 +345,16 @@
 		attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
 
 		x-size = <1024>;
-		y-size = <768>;
+		y-size = <600>;
 	};
 };
 
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+};
+
 &gpio0 {
 	status = "okay";
 };
@@ -184,3 +370,201 @@
 &gpio3 {
 	status = "okay";
 };
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_flash_x8>;
+	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
+	nand@0,0 {
+		reg = <0 0 0>; /* CS0, offset 0 */
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <40>; /* tCEA + tCHZ + 1 */
+		gpmc,cs-wr-off-ns = <40>;
+		gpmc,adv-on-ns = <0>;  /* cs-on-ns */
+		gpmc,adv-rd-off-ns = <25>; /* min( tALH + tALS + 1) */
+		gpmc,adv-wr-off-ns = <25>; /* min( tALH + tALS + 1) */
+		gpmc,we-on-ns = <0>;   /* cs-on-ns */
+		gpmc,we-off-ns = <20>; /* we-on-time + tWP + 2 */
+		gpmc,oe-on-ns = <3>;  /* cs-on-ns + tRR + 2 */
+		gpmc,oe-off-ns = <30>; /* oe-on-ns + tRP + 2 */
+		gpmc,access-ns = <30>; /* tCEA + 4*/
+		gpmc,rd-cycle-ns = <40>;
+		gpmc,wr-cycle-ns = <40>;
+		gpmc,wait-on-read = "true";
+		gpmc,wait-on-write = "true";
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		/* MTD partition table */
+		/* All SPL-* partitions are sized to minimal length
+		 * which can be independently programmable. For
+		 * NAND flash this is equal to size of erase-block */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "NAND.SPL";
+			reg = <0x00000000 0x00040000>;
+		};
+		partition@1 {
+			label = "NAND.SPL.backup1";
+			reg = <0x00040000 0x00040000>;
+		};
+		partition@2 {
+			label = "NAND.SPL.backup2";
+			reg = <0x00080000 0x00040000>;
+		};
+		partition@3 {
+			label = "NAND.SPL.backup3";
+			reg = <0x000C0000 0x00040000>;
+		};
+		partition@4 {
+			label = "NAND.u-boot-spl-os";
+			reg = <0x00100000 0x00080000>;
+		};
+		partition@5 {
+			label = "NAND.u-boot";
+			reg = <0x00180000 0x00100000>;
+		};
+		partition@6 {
+			label = "NAND.u-boot-env";
+			reg = <0x00280000 0x00040000>;
+		};
+		partition@7 {
+			label = "NAND.u-boot-env.backup1";
+			reg = <0x002C0000 0x00040000>;
+		};
+		partition@8 {
+			label = "NAND.kernel";
+			reg = <0x00300000 0x00700000>;
+		};
+		partition@9 {
+			label = "NAND.file-system";
+			reg = <0x00a00000 0x1f600000>;
+		};
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&ecap0 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ecap0_pins>;
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+};
+
+&usb2_phy1 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb2_phy2 {
+	status = "okay";
+};
+
+&usb2 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi1_default>;
+
+	spi-max-frequency = <48000000>;
+	m25p80@0 {
+		compatible = "mx66l51235l";
+		spi-max-frequency = <48000000>;
+		reg = <0>;
+		spi-cpol;
+		spi-cpha;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* MTD partition table.
+		 * The ROM checks the first 512KiB
+		 * for a valid file to boot(XIP).
+		 */
+		partition@0 {
+			label = "QSPI.U_BOOT";
+			reg = <0x00000000 0x000080000>;
+		};
+		partition@1 {
+			label = "QSPI.U_BOOT.backup";
+			reg = <0x00080000 0x00080000>;
+		};
+		partition@2 {
+			label = "QSPI.U-BOOT-SPL_OS";
+			reg = <0x00100000 0x00010000>;
+		};
+		partition@3 {
+			label = "QSPI.U_BOOT_ENV";
+			reg = <0x00110000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.U-BOOT-ENV.backup";
+			reg = <0x00120000 0x00010000>;
+		};
+		partition@5 {
+			label = "QSPI.KERNEL";
+			reg = <0x00130000 0x0800000>;
+		};
+		partition@6 {
+			label = "QSPI.FILESYSTEM";
+			reg = <0x00930000 0x36D0000>;
+		};
+	};
+};
+
+&hdq {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdq_pins>;
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_pins>;
+
+	port {
+		dpi_out: endpoint@0 {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
index 142009cc933..c7dc9dab93a 100644
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -11,6 +11,22 @@
 	sys_clkin_ck: sys_clkin_ck {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clocks = <&sysboot_freq_sel_ck>, <&crystal_freq_sel_ck>;
+		ti,bit-shift = <31>;
+		reg = <0x0040>;
+	};
+
+	crystal_freq_sel_ck: crystal_freq_sel_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
+		ti,bit-shift = <29>;
+		reg = <0x0040>;
+	};
+
+	sysboot_freq_sel_ck: sysboot_freq_sel_ck@44e10040 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
 		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
 		ti,bit-shift = <22>;
 		reg = <0x0040>;
@@ -87,6 +103,54 @@
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
+
+	ehrpwm0_tbclk: ehrpwm0_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_m2_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm1_tbclk: ehrpwm1_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_m2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm2_tbclk: ehrpwm2_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_m2_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm3_tbclk: ehrpwm3_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_m2_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm4_tbclk: ehrpwm4_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_m2_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm5_tbclk: ehrpwm5_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_m2_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0664>;
+	};
 };
 &prcm_clocks {
 	clk_32768_ck: clk_32768_ck {
@@ -229,6 +293,7 @@
 		reg = <0x2e30>;
 		ti,index-starts-at-one;
 		ti,invert-autoidle-bit;
+		ti,set-rate-parent;
 	};
 
 	dpll_per_ck: dpll_per_ck {
@@ -511,6 +576,7 @@
 		compatible = "ti,mux-clock";
 		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
 		reg = <0x4244>;
+		ti,set-rate-parent;
 	};
 
 	dpll_extdev_ck: dpll_extdev_ck {
@@ -609,10 +675,13 @@
 
 	dpll_per_clkdcoldo: dpll_per_clkdcoldo {
 		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
+		compatible = "ti,fixed-factor-clock";
 		clocks = <&dpll_per_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2e14>;
+		ti,invert-autoidle-bit;
 	};
 
 	dll_aging_clk_div: dll_aging_clk_div {
@@ -653,4 +722,36 @@
 		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>;
 		reg = <0x4260>;
 	};
+
+	usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&usbphy_32khz_clkmux>;
+		ti,bit-shift = <8>;
+		reg = <0x2a40>;
+	};
+
+	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&usbphy_32khz_clkmux>;
+		ti,bit-shift = <8>;
+		reg = <0x2a48>;
+	};
+
+	usb_otg_ss0_refclk960m: usb_otg_ss0_refclk960m {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x8a60>;
+	};
+
+	usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x8a68>;
+	};
 };
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 08a56bcfc72..416f4e5a69c 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -35,7 +35,6 @@
 
 		internal-regs {
 			serial@12000 {
-				clock-frequency = <200000000>;
 				status = "okay";
 			};
 			sata@a0000 {
@@ -64,6 +63,23 @@
 				phy-mode = "rgmii-id";
 			};
 
+			i2c@11000 {
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+				clock-frequency = <100000>;
+				status = "okay";
+				audio_codec: audio-codec@4a {
+					compatible = "cirrus,cs42l51";
+					reg = <0x4a>;
+				};
+			};
+
+			audio-controller@30000 {
+				pinctrl-0 = <&i2s_pins2>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
 			mvsdio@d4000 {
 				pinctrl-0 = <&sdio_pins1>;
 				pinctrl-names = "default";
@@ -80,6 +96,30 @@
 				broken-cd;
 			};
 
+			pinctrl {
+				/*
+				 * These pins might be muxed as I2S by
+				 * the bootloader, but it conflicts
+				 * with the real I2S pins that are
+				 * muxed using i2s_pins. We must mux
+				 * those pins to a function other than
+				 * I2S.
+				 */
+				pinctrl-0 = <&hog_pins1 &hog_pins2>;
+				pinctrl-names = "default";
+
+				hog_pins1: hog-pins1 {
+					marvell,pins = "mpp6",  "mpp8", "mpp10",
+						       "mpp12", "mpp13";
+					marvell,function = "gpio";
+				};
+
+				hog_pins2: hog-pins2 {
+					marvell,pins = "mpp5", "mpp7", "mpp9";
+					marvell,function = "gpo";
+				};
+			};
+
 			usb@50000 {
 				status = "okay";
 			};
@@ -112,10 +152,26 @@
 				/* Port 0, Lane 0 */
 				status = "okay";
 			};
+
 			pcie@2,0 {
 				/* Port 1, Lane 0 */
 				status = "okay";
 			};
 		};
 	};
+
+	sound {
+	      compatible = "marvell,a370db-audio";
+	      marvell,audio-controller = <&audio_controller>;
+	      marvell,audio-codec = <&audio_codec &spdif_out &spdif_in>;
+	      status = "okay";
+	};
+
+	spdif_out: spdif-out {
+	      compatible = "linux,spdif-dit";
+	};
+
+	spdif_in: spdif-in {
+	      compatible = "linux,spdif-dir";
+	};
 };
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
index 944e8785b30..097df7d8f0f 100644
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -9,6 +9,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "armada-370.dtsi"
 
 / {
@@ -46,7 +47,6 @@
 
 		internal-regs {
 			serial@12000 {
-				clock-frequency = <200000000>;
 				status = "okay";
 			};
 			timer@20300 {
@@ -73,19 +73,19 @@
 
 				green_pwr_led {
 					label = "mirabox:green:pwr";
-					gpios = <&gpio1 31 1>;
+					gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
 					default-state = "keep";
 				};
 
 				blue_stat_led {
 					label = "mirabox:blue:stat";
-					gpios = <&gpio2 0 1>;
+					gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
 					default-state = "off";
 				};
 
 				green_stat_led {
 					label = "mirabox:green:stat";
-					gpios = <&gpio2 1 1>;
+					gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 					default-state = "off";
 				};
 			};
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
index 651aeb5ef43..d6d572e5af3 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -50,7 +50,6 @@
 
 		internal-regs {
 			serial@12000 {
-				clock-frequency = <200000000>;
 				status = "okay";
 			};
 
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
index 4e27587667b..c5fe8b5dcdc 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -50,7 +50,6 @@
 
 		internal-regs {
 			serial@12000 {
-				clock-frequency = <200000000>;
 				status = "okay";
 			};
 
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index abbb807459d..4169f4096ea 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -12,6 +12,8 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
 #include "armada-370.dtsi"
 
 / {
@@ -49,7 +51,6 @@
 
 		internal-regs {
 			serial@12000 {
-				clock-frequency = <200000000>;
 				status = "okay";
 			};
 			sata@a0000 {
@@ -100,8 +101,8 @@
 				#size-cells = <0>;
 				button@1 {
 					label = "Software Button";
-					linux,code = <116>;
-					gpios = <&gpio0 6 1>;
+					linux,code = <KEY_POWER>;
+					gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 				};
 			};
 
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 74b5964430a..23227e0027e 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -44,8 +44,8 @@
 		#size-cells = <1>;
 		controller = <&mbusc>;
 		interrupt-parent = <&mpic>;
-		pcie-mem-aperture = <0xe0000000 0x8000000>;
-		pcie-io-aperture  = <0xe8000000 0x100000>;
+		pcie-mem-aperture = <0xf8000000 0x7e00000>;
+		pcie-io-aperture  = <0xffe00000 0x100000>;
 
 		devbus-bootcs {
 			compatible = "marvell,mvebu-devbus";
@@ -157,6 +157,7 @@
 				reg-shift = <2>;
 				interrupts = <41>;
 				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
 			serial@12100 {
@@ -165,6 +166,7 @@
 				reg-shift = <2>;
 				interrupts = <42>;
 				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
 
@@ -199,6 +201,15 @@
 				interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
 			};
 
+			watchdog@20300 {
+				reg = <0x20300 0x34>, <0x20704 0x4>;
+			};
+
+			pmsu@22000 {
+				compatible = "marvell,armada-370-pmsu";
+				reg = <0x22000 0x1000>;
+			};
+
 			usb@50000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x50000 0x500>;
@@ -226,6 +237,7 @@
 				#size-cells = <0>;
 				compatible = "marvell,orion-mdio";
 				reg = <0x72004 0x4>;
+				clocks = <&gateclk 4>;
 			};
 
 			eth1: ethernet@74000 {
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 0d8530c98cf..21b588b6f6b 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -132,6 +132,25 @@
 							"mpp51", "mpp52", "mpp53";
 					marvell,function = "sd0";
 				};
+
+				i2c0_pins: i2c0-pins {
+					marvell,pins = "mpp2", "mpp3";
+					marvell,function = "i2c0";
+				};
+
+				i2s_pins1: i2s-pins1 {
+					marvell,pins = "mpp5", "mpp6", "mpp7",
+						       "mpp8", "mpp9", "mpp10",
+						       "mpp12", "mpp13";
+					marvell,function = "audio";
+				};
+
+				i2s_pins2: i2s-pins2 {
+					marvell,pins = "mpp49", "mpp47", "mpp50",
+						       "mpp59", "mpp57", "mpp61",
+						       "mpp62", "mpp60", "mpp58";
+					marvell,function = "audio";
+				};
 			};
 
 			gpio0: gpio@18100 {
@@ -196,6 +215,25 @@
 				clocks = <&coreclk 2>;
 			};
 
+			watchdog@20300 {
+				compatible = "marvell,armada-370-wdt";
+				clocks = <&coreclk 2>;
+			};
+
+			cpurst@20800 {
+				compatible = "marvell,armada-370-cpu-reset";
+				reg = <0x20800 0x8>;
+			};
+
+			audio_controller: audio-controller@30000 {
+				compatible = "marvell,armada370-audio";
+				reg = <0x30000 0x4000>;
+				interrupts = <93>;
+				clocks = <&gateclk 0>;
+				clock-names = "internal";
+				status = "disabled";
+			};
+
 			usb@50000 {
 				clocks = <&coreclk 0>;
 			};
diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts
new file mode 100644
index 00000000000..1e2919d43d7
--- /dev/null
+++ b/arch/arm/boot/dts/armada-375-db.dts
@@ -0,0 +1,144 @@
+/*
+ * Device Tree file for Marvell Armada 375 evaluation board
+ * (DB-88F6720)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-375.dtsi"
+
+/ {
+	model = "Marvell Armada 375 Development Board";
+	compatible = "marvell,a375-db", "marvell,armada375";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			spi@10600 {
+				pinctrl-0 = <&spi0_pins>;
+				pinctrl-names = "default";
+				/*
+				 * SPI conflicts with NAND, so we disable it
+				 * here, and select NAND as the enabled device
+				 * by default.
+				 */
+				status = "disabled";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "n25q128a13";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <108000000>;
+				};
+			};
+
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+			};
+
+			i2c@11100 {
+				status = "okay";
+				clock-frequency = <100000>;
+				pinctrl-0 = <&i2c1_pins>;
+				pinctrl-names = "default";
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			pinctrl {
+				sdio_st_pins: sdio-st-pins {
+					marvell,pins = "mpp44", "mpp45";
+					marvell,function = "gpio";
+				};
+			};
+
+			sata@a0000 {
+				status = "okay";
+				nr-ports = <2>;
+			};
+
+			nand: nand@d0000 {
+				pinctrl-0 = <&nand_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+
+				partition@0 {
+					label = "U-Boot";
+					reg = <0 0x800000>;
+				};
+				partition@800000 {
+					label = "Linux";
+					reg = <0x800000 0x800000>;
+				};
+				partition@1000000 {
+					label = "Filesystem";
+					reg = <0x1000000 0x3f000000>;
+				};
+			};
+
+			usb@54000 {
+				status = "okay";
+			};
+
+			usb3@58000 {
+				status = "okay";
+			};
+
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins &sdio_st_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+				wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+			/*
+			 * The two PCIe units are accessible through
+			 * standard PCIe slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
new file mode 100644
index 00000000000..fb92551a1e7
--- /dev/null
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -0,0 +1,519 @@
+/*
+ * Device Tree Include file for Marvell Armada 375 family SoC
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+	model = "Marvell Armada 375 family SoC";
+	compatible = "marvell,armada375";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+	clocks {
+		/* 2 GHz fixed main PLL */
+		mainpll: mainpll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <2000000000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-375-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	soc {
+		compatible = "marvell,armada375-mbus", "marvell,armada370-mbus", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+		interrupt-parent = <&gic>;
+		pcie-mem-aperture = <0xe0000000 0x8000000>;
+		pcie-io-aperture  = <0xe8000000 0x100000>;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+		};
+
+		devbus-bootcs {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs0 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs1 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs2 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs3 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			L2: cache-controller@8000 {
+				compatible = "arm,pl310-cache";
+				reg = <0x8000 0x1000>;
+				cache-unified;
+				cache-level = <2>;
+			};
+
+			scu@c000 {
+				compatible = "arm,cortex-a9-scu";
+				reg = <0xc000 0x58>;
+			};
+
+			timer@c600 {
+				compatible = "arm,cortex-a9-twd-timer";
+				reg = <0xc600 0x20>;
+				interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
+				clocks = <&coreclk 2>;
+			};
+
+			gic: interrupt-controller@d000 {
+				compatible = "arm,cortex-a9-gic";
+				#interrupt-cells = <3>;
+				#size-cells = <0>;
+				interrupt-controller;
+				reg = <0xd000 0x1000>,
+				      <0xc100 0x100>;
+			};
+
+			spi0: spi@10600 {
+				compatible = "marvell,orion-spi";
+				reg = <0x10600 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			spi1: spi@10680 {
+				compatible = "marvell,orion-spi";
+				reg = <0x10680 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <1>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11100 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			serial@12000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			serial@12100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			pinctrl {
+				compatible = "marvell,mv88f6720-pinctrl";
+				reg = <0x18000 0x24>;
+
+				i2c0_pins: i2c0-pins {
+					marvell,pins = "mpp14",  "mpp15";
+					marvell,function = "i2c0";
+				};
+
+				i2c1_pins: i2c1-pins {
+					marvell,pins = "mpp61",  "mpp62";
+					marvell,function = "i2c1";
+				};
+
+				nand_pins: nand-pins {
+					marvell,pins = "mpp0", "mpp1", "mpp2",
+						"mpp3", "mpp4", "mpp5",
+						"mpp6", "mpp7", "mpp8",
+						"mpp9", "mpp10", "mpp11",
+						"mpp12", "mpp13";
+					marvell,function = "nand";
+				};
+
+				sdio_pins: sdio-pins {
+					marvell,pins = "mpp24",  "mpp25", "mpp26",
+						     "mpp27", "mpp28", "mpp29";
+					marvell,function = "sd";
+				};
+
+				spi0_pins: spi0-pins {
+					marvell,pins = "mpp0",  "mpp1", "mpp4",
+						     "mpp5", "mpp8", "mpp9";
+					marvell,function = "spi0";
+				};
+			};
+
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			gpio2: gpio@18180 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			system-controller@18200 {
+				compatible = "marvell,armada-375-system-controller";
+				reg = <0x18200 0x100>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-375-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>;
+			};
+
+			mpic: interrupt-controller@20000 {
+				compatible = "marvell,mpic";
+				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+				#interrupt-cells = <1>;
+				#size-cells = <1>;
+				interrupt-controller;
+				msi-controller;
+				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			timer@20300 {
+				compatible = "marvell,armada-375-timer", "marvell,armada-370-timer";
+				reg = <0x20300 0x30>, <0x21040 0x30>;
+				interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+						      <&mpic 5>,
+						      <&mpic 6>;
+				clocks = <&coreclk 0>;
+			};
+
+			watchdog@20300 {
+				compatible = "marvell,armada-375-wdt";
+				reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>;
+				clocks = <&coreclk 0>;
+			};
+
+			cpurst@20800 {
+				compatible = "marvell,armada-370-cpu-reset";
+				reg = <0x20800 0x10>;
+			};
+
+			coherency-fabric@21010 {
+				compatible = "marvell,armada-375-coherency-fabric";
+				reg = <0x21010 0x1c>;
+			};
+
+			usb@50000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x50000 0x500>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 18>;
+				status = "disabled";
+			};
+
+			usb@54000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x54000 0x500>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 26>;
+				status = "disabled";
+			};
+
+			usb3@58000 {
+				compatible = "marvell,armada-375-xhci";
+				reg = <0x58000 0x20000>,<0x5b880 0x80>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 16>;
+				status = "disabled";
+			};
+
+			xor@60800 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60800 0x100
+				       0x60A00 0x100>;
+				clocks = <&gateclk 22>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			xor@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				clocks = <&gateclk 23>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			sata@a0000 {
+				compatible = "marvell,orion-sata";
+				reg = <0xa0000 0x5000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 14>, <&gateclk 20>;
+				clock-names = "0", "1";
+				status = "disabled";
+			};
+
+			nand@d0000 {
+				compatible = "marvell,armada370-nand";
+				reg = <0xd0000 0x54>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 11>;
+				status = "disabled";
+			};
+
+			mvsdio@d4000 {
+				compatible = "marvell,orion-sdio";
+				reg = <0xd4000 0x200>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 17>;
+				bus-width = <4>;
+				cap-sdio-irq;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				status = "disabled";
+			};
+
+			thermal@e8078 {
+				compatible = "marvell,armada375-thermal";
+				reg = <0xe8078 0x4>, <0xe807c 0x8>;
+				status = "okay";
+			};
+
+			coreclk: mvebu-sar@e8204 {
+				compatible = "marvell,armada-375-core-clock";
+				reg = <0xe8204 0x04>;
+				#clock-cells = <1>;
+			};
+
+			coredivclk: corediv-clock@e8250 {
+				compatible = "marvell,armada-375-corediv-clock";
+				reg = <0xe8250 0xc>;
+				#clock-cells = <1>;
+				clocks = <&mainpll>;
+				clock-output-names = "nand";
+			};
+		};
+
+		pcie-controller {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0 MEM */
+				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0 IO  */
+				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1 MEM */
+				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1 IO  */>;
+
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi
new file mode 100644
index 00000000000..4173a8ab34e
--- /dev/null
+++ b/arch/arm/boot/dts/armada-380.dtsi
@@ -0,0 +1,119 @@
+/*
+ * Device Tree Include file for Marvell Armada 380 SoC.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "armada-38x.dtsi"
+
+/ {
+	model = "Marvell Armada 380 family SoC";
+	compatible = "marvell,armada380";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-380-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+	};
+
+	soc {
+		internal-regs {
+			pinctrl {
+				compatible = "marvell,mv88f6810-pinctrl";
+				reg = <0x18000 0x20>;
+			};
+		};
+
+		pcie-controller {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */>;
+
+			/* x1 port */
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			/* x1 port */
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			/* x1 port */
+			pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-385-db.dts
new file mode 100644
index 00000000000..1af886f1e48
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-db.dts
@@ -0,0 +1,151 @@
+/*
+ * Device Tree file for Marvell Armada 385 evaluation board
+ * (DB-88F6820)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+/ {
+	model = "Marvell Armada 385 Development Board";
+	compatible = "marvell,a385-db", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			spi@10600 {
+				status = "okay";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "w25q32";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <108000000>;
+				};
+			};
+
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+			};
+
+			i2c@11100 {
+				status = "okay";
+				clock-frequency = <100000>;
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			usb@50000 {
+				status = "ok";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			sata@a8000 {
+				status = "okay";
+			};
+
+			sata@e0000 {
+				status = "okay";
+			};
+
+			flash@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+
+				partition@0 {
+					label = "U-Boot";
+					reg = <0 0x800000>;
+				};
+				partition@800000 {
+					label = "Linux";
+					reg = <0x800000 0x800000>;
+				};
+				partition@1000000 {
+					label = "Filesystem";
+					reg = <0x1000000 0x3f000000>;
+				};
+			};
+
+			sdhci@d8000 {
+				clock-frequency = <200000000>;
+				broken-cd;
+				wp-inverted;
+				bus-width = <8>;
+				status = "okay";
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				status = "okay";
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+			/*
+			 * The two PCIe units are accessible through
+			 * standard PCIe slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-385-rd.dts b/arch/arm/boot/dts/armada-385-rd.dts
new file mode 100644
index 00000000000..aaca2861dc8
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-rd.dts
@@ -0,0 +1,97 @@
+/*
+ * Device Tree file for Marvell Armada 385 Reference Design board
+ * (RD-88F6820-AP)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+/ {
+	model = "Marvell Armada 385 Reference Design";
+	compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			spi@10600 {
+				status = "okay";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "st,m25p128";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <108000000>;
+				};
+			};
+
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+			/*
+			 * One PCIe units is accessible through
+			 * standard PCIe slot on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
new file mode 100644
index 00000000000..6283d7912f7
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385.dtsi
@@ -0,0 +1,151 @@
+/*
+ * Device Tree Include file for Marvell Armada 385 SoC.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "armada-38x.dtsi"
+
+/ {
+	model = "Marvell Armada 385 family SoC";
+	compatible = "marvell,armada385", "marvell,armada380";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-380-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	soc {
+		internal-regs {
+			pinctrl {
+				compatible = "marvell,mv88f6820-pinctrl";
+				reg = <0x18000 0x20>;
+			};
+		};
+
+		pcie-controller {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO  */>;
+
+			/*
+			 * This port can be either x4 or x1. When
+			 * configured in x4 by the bootloader, then
+			 * pcie@4,0 is not available.
+			 */
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			/* x1 port */
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			/* x1 port */
+			pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+			/*
+			 * x1 port only available when pcie@1,0 is
+			 * configured as a x1 port
+			 */
+			pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <3>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
new file mode 100644
index 00000000000..689fa1a4672
--- /dev/null
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -0,0 +1,461 @@
+/*
+ * Device Tree Include file for Marvell Armada 38x family of SoCs.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+	model = "Marvell Armada 38x family SoC";
+	compatible = "marvell,armada380";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		eth0 = &eth0;
+		eth1 = &eth1;
+		eth2 = &eth2;
+	};
+
+	soc {
+		compatible = "marvell,armada380-mbus", "marvell,armada370-mbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+		interrupt-parent = <&gic>;
+		pcie-mem-aperture = <0xe0000000 0x8000000>;
+		pcie-io-aperture  = <0xe8000000 0x100000>;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
+		};
+
+		devbus-bootcs {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs0 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs1 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs2 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs3 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			L2: cache-controller@8000 {
+				compatible = "arm,pl310-cache";
+				reg = <0x8000 0x1000>;
+				cache-unified;
+				cache-level = <2>;
+			};
+
+			scu@c000 {
+				compatible = "arm,cortex-a9-scu";
+				reg = <0xc000 0x58>;
+			};
+
+			timer@c600 {
+				compatible = "arm,cortex-a9-twd-timer";
+				reg = <0xc600 0x20>;
+				interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
+				clocks = <&coreclk 2>;
+			};
+
+			gic: interrupt-controller@d000 {
+				compatible = "arm,cortex-a9-gic";
+				#interrupt-cells = <3>;
+				#size-cells = <0>;
+				interrupt-controller;
+				reg = <0xd000 0x1000>,
+				      <0xc100 0x100>;
+			};
+
+			spi0: spi@10600 {
+				compatible = "marvell,orion-spi";
+				reg = <0x10600 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			spi1: spi@10680 {
+				compatible = "marvell,orion-spi";
+				reg = <0x10680 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <1>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11100 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			serial@12000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			serial@12100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			pinctrl {
+				compatible = "marvell,mv88f6820-pinctrl";
+				reg = <0x18000 0x20>;
+			};
+
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				ngpios = <28>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			system-controller@18200 {
+				compatible = "marvell,armada-380-system-controller",
+					     "marvell,armada-370-xp-system-controller";
+				reg = <0x18200 0x100>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-380-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
+
+			coreclk: mvebu-sar@18600 {
+				compatible = "marvell,armada-380-core-clock";
+				reg = <0x18600 0x04>;
+				#clock-cells = <1>;
+			};
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>;
+			};
+
+			mpic: interrupt-controller@20000 {
+				compatible = "marvell,mpic";
+				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+				#interrupt-cells = <1>;
+				#size-cells = <1>;
+				interrupt-controller;
+				msi-controller;
+				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			timer@20300 {
+				compatible = "marvell,armada-380-timer",
+					     "marvell,armada-xp-timer";
+				reg = <0x20300 0x30>, <0x21040 0x30>;
+				interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+						      <&mpic 5>,
+						      <&mpic 6>;
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
+			watchdog@20300 {
+				compatible = "marvell,armada-380-wdt";
+				reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>;
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
+			cpurst@20800 {
+				compatible = "marvell,armada-370-cpu-reset";
+				reg = <0x20800 0x10>;
+			};
+
+			coherency-fabric@21010 {
+				compatible = "marvell,armada-380-coherency-fabric";
+				reg = <0x21010 0x1c>;
+			};
+
+			pmsu@22000 {
+				compatible = "marvell,armada-380-pmsu";
+				reg = <0x22000 0x1000>;
+			};
+
+			eth1: ethernet@30000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0x30000 0x4000>;
+				interrupts-extended = <&mpic 10>;
+				clocks = <&gateclk 3>;
+				status = "disabled";
+			};
+
+			eth2: ethernet@34000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0x34000 0x4000>;
+				interrupts-extended = <&mpic 12>;
+				clocks = <&gateclk 2>;
+				status = "disabled";
+			};
+
+			usb@50000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x58000 0x500>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 18>;
+				status = "disabled";
+			};
+
+			xor@60800 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60800 0x100
+				       0x60a00 0x100>;
+				clocks = <&gateclk 22>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			xor@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				clocks = <&gateclk 28>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			eth0: ethernet@70000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0x70000 0x4000>;
+				interrupts-extended = <&mpic 8>;
+				clocks = <&gateclk 4>;
+				status = "disabled";
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0x72004 0x4>;
+				clocks = <&gateclk 4>;
+			};
+
+			sata@a8000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xa8000 0x2000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 15>;
+				status = "disabled";
+			};
+
+			sata@e0000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xe0000 0x2000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 30>;
+				status = "disabled";
+			};
+
+			coredivclk: clock@e4250 {
+				compatible = "marvell,armada-380-corediv-clock";
+				reg = <0xe4250 0xc>;
+				#clock-cells = <1>;
+				clocks = <&mainpll>;
+				clock-output-names = "nand";
+			};
+
+			thermal@e8078 {
+				compatible = "marvell,armada380-thermal";
+				reg = <0xe4078 0x4>, <0xe4074 0x4>;
+				status = "okay";
+			};
+
+			flash@d0000 {
+				compatible = "marvell,armada370-nand";
+				reg = <0xd0000 0x54>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coredivclk 0>;
+				status = "disabled";
+			};
+
+			sdhci@d8000 {
+				compatible = "marvell,armada-380-sdhci";
+				reg = <0xd8000 0x1000>, <0xdc000 0x100>;
+				interrupts = <0 25 0x4>;
+				clocks = <&gateclk 17>;
+				mrvl,clk-delay-cycles = <0x1F>;
+				status = "disabled";
+			};
+
+			usb3@f0000 {
+				compatible = "marvell,armada-380-xhci";
+				reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+
+			usb3@f8000 {
+				compatible = "marvell,armada-380-xhci";
+				reg = <0xf8000 0x4000>,<0xfc000 0x4000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 10>;
+				status = "disabled";
+			};
+		};
+	};
+
+	clocks {
+		/* 2 GHz fixed main PLL */
+		mainpll: mainpll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <2000000000>;
+		};
+
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
index c5fe57269f5..a55a97a7050 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -16,6 +16,8 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include "armada-xp-mv78230.dtsi"
 
 / {
@@ -93,12 +95,10 @@
 			};
 
 			serial@12000 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 
 			serial@12100 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 
@@ -157,8 +157,8 @@
 
 		button@1 {
 			label = "Factory Reset Button";
-			linux,code = <141>; /* KEY_SETUP */
-			gpios = <&gpio1 1 1>;
+			linux,code = <KEY_SETUP>;
+			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index bcf6d79a57e..42ddb286436 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -2,7 +2,7 @@
  * Device Tree file for Marvell Armada XP evaluation board
  * (DB-78460-BP)
  *
- * Copyright (C) 2012 Marvell
+ * Copyright (C) 2012-2014 Marvell
  *
  * Lior Amsalem <alior@marvell.com>
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
@@ -11,6 +11,15 @@
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
+  *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
  */
 
 /dts-v1/;
@@ -30,7 +39,7 @@
 	};
 
 	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
 			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
 
@@ -40,7 +49,7 @@
 			/* Device Bus parameters are required */
 
 			/* Read parameters */
-			devbus,bus-width    = <8>;
+			devbus,bus-width    = <16>;
 			devbus,turn-off-ps  = <60000>;
 			devbus,badr-skew-ps = <0>;
 			devbus,acc-first-ps = <124000>;
@@ -97,19 +106,15 @@
 
 		internal-regs {
 			serial@12000 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 			serial@12100 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 			serial@12200 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 			serial@12300 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 274e2ad5f51..0478c55ca65 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -2,7 +2,7 @@
  * Device Tree file for Marvell Armada XP development board
  * (DB-MV784MP-GP)
  *
- * Copyright (C) 2013 Marvell
+ * Copyright (C) 2013-2014 Marvell
  *
  * Lior Amsalem <alior@marvell.com>
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
@@ -11,6 +11,15 @@
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
  */
 
 /dts-v1/;
@@ -30,16 +39,17 @@
                  * 8 GB of plug-in RAM modules by default.The amount
                  * of memory available can be changed by the
                  * bootloader according the size of the module
-                 * actually plugged. Only 7GB are usable because
-                 * addresses from 0xC0000000 to 0xffffffff are used by
-                 * the internal registers of the SoC.
+                 * actually plugged. However, memory between
+                 * 0xF0000000 to 0xFFFFFFFF cannot be used, as it is
+                 * the address range used for I/O (internal registers,
+                 * MBus windows).
 		 */
-		reg = <0x00000000 0x00000000 0x00000000 0xC0000000>,
+		reg = <0x00000000 0x00000000 0x00000000 0xf0000000>,
 		      <0x00000001 0x00000000 0x00000001 0x00000000>;
 	};
 
 	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
 			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
 
@@ -49,7 +59,7 @@
 			/* Device Bus parameters are required */
 
 			/* Read parameters */
-			devbus,bus-width    = <8>;
+			devbus,bus-width    = <16>;
 			devbus,turn-off-ps  = <60000>;
 			devbus,badr-skew-ps = <0>;
 			devbus,acc-first-ps = <124000>;
@@ -94,19 +104,15 @@
 
 		internal-regs {
 			serial@12000 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 			serial@12100 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 			serial@12200 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 			serial@12300 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 
@@ -136,22 +142,22 @@
 			ethernet@70000 {
 				status = "okay";
 				phy = <&phy0>;
-				phy-mode = "rgmii-id";
+				phy-mode = "qsgmii";
 			};
 			ethernet@74000 {
 				status = "okay";
 				phy = <&phy1>;
-				phy-mode = "rgmii-id";
+				phy-mode = "qsgmii";
 			};
 			ethernet@30000 {
 				status = "okay";
 				phy = <&phy2>;
-				phy-mode = "rgmii-id";
+				phy-mode = "qsgmii";
 			};
 			ethernet@34000 {
 				status = "okay";
 				phy = <&phy3>;
-				phy-mode = "rgmii-id";
+				phy-mode = "qsgmii";
 			};
 
 			/* Front-side USB slot */
diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts
index e47c49ecd55..7e291e2ef4b 100644
--- a/arch/arm/boot/dts/armada-xp-matrix.dts
+++ b/arch/arm/boot/dts/armada-xp-matrix.dts
@@ -23,7 +23,12 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0x00000000 0 0x80000000>; /* 2 GB */
+		/*
+		 * This board has 4 GB of RAM, but the last 256 MB of
+		 * RAM are not usable due to the overlap with the MBus
+		 * Window address range
+		 */
+		reg = <0 0x00000000 0 0xf0000000>;
 	};
 
 	soc {
@@ -32,19 +37,15 @@
 
 		internal-regs {
 			serial@12000 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 			serial@12100 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 			serial@12200 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 			serial@12300 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 
@@ -56,6 +57,10 @@
 			ethernet@30000 {
 				status = "okay";
 				phy-mode = "sgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
 			};
 
 			pcie-controller {
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 98335fb34b7..1257ff1ed27 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -27,6 +27,7 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "marvell,armada-xp-smp";
 
 		cpu@0 {
 			device_type = "cpu";
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 66609684d41..3396b25b39e 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -23,11 +23,13 @@
 		gpio0 = &gpio0;
 		gpio1 = &gpio1;
 		gpio2 = &gpio2;
+		eth3 = &eth3;
 	};
 
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "marvell,armada-xp-smp";
 
 		cpu@0 {
 			device_type = "cpu";
@@ -291,7 +293,7 @@
 				interrupts = <91>;
 			};
 
-			ethernet@34000 {
+			eth3: ethernet@34000 {
 				compatible = "marvell,armada-370-neta";
 				reg = <0x34000 0x4000>;
 				interrupts = <14>;
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index 31ba6d8fbad..6da84bf40aa 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -30,6 +30,7 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "marvell,armada-xp-smp";
 
 		cpu@0 {
 			device_type = "cpu";
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
index ff049ee862e..0cf999abc4e 100644
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -138,7 +138,6 @@
 			};
 
 			serial@12000 {
-				clocks = <&coreclk 0>;
 				status = "okay";
 			};
 
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index 99bcf76e695..4e5a59ee150 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -11,6 +11,8 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include "armada-xp-mv78260.dtsi"
 
 / {
@@ -23,7 +25,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0x00000000 0 0xC0000000>; /* 3 GB */
+		reg = <0 0x00000000 0 0x40000000>; /* 1 GB soldered on */
 	};
 
 	soc {
@@ -37,7 +39,7 @@
 			/* Device Bus parameters are required */
 
 			/* Read parameters */
-			devbus,bus-width    = <8>;
+			devbus,bus-width    = <16>;
 			devbus,turn-off-ps  = <60000>;
 			devbus,badr-skew-ps = <0>;
 			devbus,acc-first-ps = <124000>;
@@ -70,11 +72,9 @@
 
 		internal-regs {
 			serial@12000 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 			serial@12100 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 			pinctrl {
@@ -90,19 +90,19 @@
 
 				red_led {
 					label = "red_led";
-					gpios = <&gpio1 17 1>;
+					gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 					default-state = "off";
 				};
 
 				yellow_led {
 					label = "yellow_led";
-					gpios = <&gpio1 19 1>;
+					gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
 					default-state = "off";
 				};
 
 				green_led {
 					label = "green_led";
-					gpios = <&gpio1 21 1>;
+					gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
 					default-state = "keep";
 				};
 			};
@@ -114,8 +114,8 @@
 
 				button@1 {
 					label = "Init Button";
-					linux,code = <116>;
-					gpios = <&gpio1 28 0>;
+					linux,code = <KEY_POWER>;
+					gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index b8b84a22f0f..5902e8359c9 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -58,6 +58,7 @@
 				reg-shift = <2>;
 				interrupts = <43>;
 				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
 			serial@12300 {
@@ -66,6 +67,7 @@
 				reg-shift = <2>;
 				interrupts = <44>;
 				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
 
@@ -111,9 +113,15 @@
 				clock-names = "nbclk", "fixed";
 			};
 
-			armada-370-xp-pmsu@22000 {
-				compatible = "marvell,armada-370-xp-pmsu";
-				reg = <0x22100 0x400>, <0x20800 0x20>;
+			watchdog@20300 {
+				compatible = "marvell,armada-xp-wdt";
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
+			cpurst@20800 {
+				compatible = "marvell,armada-370-cpu-reset";
+				reg = <0x20800 0x20>;
 			};
 
 			eth2: ethernet@30000 {
diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts
index cce45f5177f..55ab6180e35 100644
--- a/arch/arm/boot/dts/at91-ariag25.dts
+++ b/arch/arm/boot/dts/at91-ariag25.dts
@@ -129,7 +129,6 @@
 			adc0: adc@f804c000 {
 				status = "okay";
 				atmel,adc-channels-used = <0xf>;
-				atmel,adc-num-channels = <4>;
 			};
 
 			dbgu: serial@fffff200 {
diff --git a/arch/arm/boot/dts/at91-cosino.dtsi b/arch/arm/boot/dts/at91-cosino.dtsi
index 2093c4d7cd6..df4b7869569 100644
--- a/arch/arm/boot/dts/at91-cosino.dtsi
+++ b/arch/arm/boot/dts/at91-cosino.dtsi
@@ -64,7 +64,6 @@
 			};
 
 			adc0: adc@f804c000 {
-				atmel,adc-clock-rate = <1000000>;
 				atmel,adc-ts-wires = <4>;
 				atmel,adc-ts-pressure-threshold = <10000>;
 				status = "okay";
diff --git a/arch/arm/boot/dts/at91-cosino_mega2560.dts b/arch/arm/boot/dts/at91-cosino_mega2560.dts
index f9415dd11f1..27ebb0f722f 100644
--- a/arch/arm/boot/dts/at91-cosino_mega2560.dts
+++ b/arch/arm/boot/dts/at91-cosino_mega2560.dts
@@ -27,17 +27,11 @@
 			};
 
 			adc0: adc@f804c000 {
-				atmel,adc-clock-rate = <1000000>;
 				atmel,adc-ts-wires = <4>;
 				atmel,adc-ts-pressure-threshold = <10000>;
 				status = "okay";
 			};
 
-
-			tsadcc: tsadcc@f804c000 {
-				status = "okay";
-			};
-
 			rtc@fffffeb0 {
 				status = "okay";
 			};
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
new file mode 100644
index 00000000000..5b8e40400be
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -0,0 +1,299 @@
+/*
+ * at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board
+ *
+ *  Copyright (C) 2014 Atmel,
+ *		  2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+
+/ {
+	model = "SAMA5D3 Xplained";
+	compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	slow_xtal {
+		clock-frequency = <32768>;
+	};
+
+	main_xtal {
+		clock-frequency = <12000000>;
+	};
+
+	ahb {
+		apb {
+			mmc0: mmc@f0000000 {
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <8>;
+					cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
+				};
+			};
+
+			spi0: spi@f0004000 {
+				cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				pinctrl-0 = <&pinctrl_i2c0_pu>;
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+
+				pmic: act8865@5b {
+					compatible = "active-semi,act8865";
+					reg = <0x5b>;
+					status = "okay";
+
+					regulators {
+						vcc_1v8_reg: DCDC_REG1 {
+							regulator-name = "VCC_1V8";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <1800000>;
+							regulator-always-on;
+						};
+
+						vcc_1v2_reg: DCDC_REG2 {
+							regulator-name = "VCC_1V2";
+							regulator-min-microvolt = <1200000>;
+							regulator-max-microvolt = <1200000>;
+							regulator-always-on;
+						};
+
+						vcc_3v3_reg: DCDC_REG3 {
+							regulator-name = "VCC_3V3";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vddfuse_reg: LDO_REG1 {
+							regulator-name = "FUSE_2V5";
+							regulator-min-microvolt = <2500000>;
+							regulator-max-microvolt = <2500000>;
+						};
+
+						vddana_reg: LDO_REG2 {
+							regulator-name = "VDDANA";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+					};
+				};
+			};
+
+			macb0: ethernet@f0028000 {
+				phy-mode = "rgmii";
+				status = "okay";
+			};
+
+			pwm0: pwm@f002c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm0_pwmh0_0 &pinctrl_pwm0_pwmh1_0>;
+				status = "okay";
+			};
+
+			usart0: serial@f001c000 {
+				status = "okay";
+			};
+
+			usart1: serial@f0020000 {
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+				status = "okay";
+			};
+
+			uart0: serial@f0024000 {
+				status = "okay";
+			};
+
+			mmc1: mmc@f8000000 {
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 1 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			spi1: spi@f8008000 {
+				cs-gpios = <&pioC 25 0>;
+				status = "okay";
+			};
+
+			adc0: adc@f8018000 {
+				pinctrl-0 = <
+					&pinctrl_adc0_adtrg
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					&pinctrl_adc0_ad5
+					&pinctrl_adc0_ad6
+					&pinctrl_adc0_ad7
+					&pinctrl_adc0_ad8
+					&pinctrl_adc0_ad9
+					>;
+				status = "okay";
+			};
+
+			i2c2: i2c@f801c000 {
+				dmas = <0>, <0>;	/* Do not use DMA for i2c2 */
+				pinctrl-0 = <&pinctrl_i2c2_pu>;
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			pinctrl@fffff200 {
+				board {
+					pinctrl_i2c0_pu: i2c0_pu {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_i2c2_pu: i2c2_pu {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_mmc0_cd: mmc0_cd {
+						atmel,pins =
+							<AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PE9, conflicts with A9 */
+					};
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				main: mainck {
+					clock-frequency = <12000000>;
+				};
+			};
+		};
+
+		nand0: nand@60000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			atmel,has-pmecc;
+			atmel,pmecc-cap = <4>;
+			atmel,pmecc-sector-size = <512>;
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "bootloader";
+				reg = <0x40000 0x80000>;
+			};
+
+			bootloaderenv@c0000 {
+				label = "bootloader env";
+				reg = <0xc0000 0xc0000>;
+			};
+
+			dtb@180000 {
+				label = "device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+
+		usb0: gadget@00500000 {
+			atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;	/* PE9, conflicts with A9 */
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@00600000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioE 3 GPIO_ACTIVE_LOW
+					   &pioE 4 GPIO_ACTIVE_LOW
+					  >;
+			status = "okay";
+		};
+
+		usb2: ehci@00700000 {
+			status = "okay";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		bp3 {
+			label = "PB_USER";
+			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+			linux,code = <0x104>;
+			gpio-key,wakeup;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d2 {
+			label = "d2";
+			gpios = <&pioE 23 GPIO_ACTIVE_LOW>;	/* PE23, conflicts with A23, CTS2 */
+			linux,default-trigger = "heartbeat";
+		};
+
+		d3 {
+			label = "d3";
+			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 997901f7ed7..c0e0eae16a2 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -608,39 +608,40 @@
 			};
 
 			adc0: adc@fffe0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
 				compatible = "atmel,at91sam9260-adc";
 				reg = <0xfffe0000 0x100>;
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>;
 				atmel,adc-use-external-triggers;
 				atmel,adc-channels-used = <0xf>;
 				atmel,adc-vref = <3300>;
-				atmel,adc-num-channels = <4>;
 				atmel,adc-startup-time = <15>;
-				atmel,adc-channel-base = <0x30>;
-				atmel,adc-drdy-mask = <0x10000>;
-				atmel,adc-status-register = <0x1c>;
-				atmel,adc-trigger-register = <0x04>;
 				atmel,adc-res = <8 10>;
 				atmel,adc-res-names = "lowres", "highres";
 				atmel,adc-use-res = "highres";
 
 				trigger@0 {
+					reg = <0>;
 					trigger-name = "timer-counter-0";
 					trigger-value = <0x1>;
 				};
 				trigger@1 {
+					reg = <1>;
 					trigger-name = "timer-counter-1";
 					trigger-value = <0x3>;
 				};
 
 				trigger@2 {
+					reg = <2>;
 					trigger-name = "timer-counter-2";
 					trigger-value = <0x5>;
 				};
 
 				trigger@3 {
+					reg = <3>;
 					trigger-name = "external";
-					trigger-value = <0x13>;
+					trigger-value = <0xd>;
 					trigger-external;
 				};
 			};
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
new file mode 100644
index 00000000000..04927db1d6b
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -0,0 +1,851 @@
+/*
+ * at91sam9261.dtsi - Device Tree Include file for AT91SAM9261 SoC
+ *
+ *  Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
+ *
+ * Licensed under GPLv2 only.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	model = "Atmel AT91SAM9261 family SoC";
+	compatible = "atmel,at91sam9261";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		tcb0 = &tcb0;
+		i2c0 = &i2c0;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		ssc2 = &ssc2;
+	};
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+		};
+	};
+
+	memory {
+		reg = <0x20000000 0x08000000>;
+	};
+
+	main_xtal: main_xtal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	slow_xtal: slow_xtal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		usb0: ohci@00500000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&usb>, <&ohci_clk>, <&hclk0>, <&uhpck>;
+			clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		fb0: fb@0x00600000 {
+			compatible = "atmel,at91sam9261-lcdc";
+			reg = <0x00600000 0x1000>;
+			interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fb>;
+			clocks = <&lcd_clk>, <&hclk1>;
+			clock-names = "lcdc_clk", "hclk";
+			status = "disabled";
+		};
+
+		nand0: nand@40000000 {
+			compatible = "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40000000 0x10000000>;
+			atmel,nand-addr-offset = <22>;
+			atmel,nand-cmd-offset = <21>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+
+			gpios = <&pioC 15 GPIO_ACTIVE_HIGH>,
+				<&pioC 14 GPIO_ACTIVE_HIGH>,
+				<0>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			tcb0: timer@fffa0000 {
+				compatible = "atmel,at91rm9200-tcb";
+				reg = <0xfffa0000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <18 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <19 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk";
+			};
+
+			usb1: gadget@fffa4000 {
+				compatible = "atmel,at91rm9200-udc";
+				reg = <0xfffa4000 0x4000>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&usb>, <&udc_clk>, <&udpck>;
+				clock-names = "usb_clk", "udc_clk", "udpck";
+				status = "disabled";
+			};
+
+			mmc0: mmc@fffa8000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffa8000 0x600>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk>, <&pinctrl_mmc0_slot0_cmd_dat0>, <&pinctrl_mmc0_slot0_dat1_3>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&mci0_clk>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@fffac000 {
+				compatible = "atmel,at91sam9261-i2c";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c_twi>;
+				reg = <0xfffac000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi0_clk>;
+				status = "disabled";
+			};
+
+			usart0: serial@fffb0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb0000 0x200>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&usart0_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fffb4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb4000 0x200>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&usart1_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fffb8000{
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb8000 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&usart2_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc0: ssc@fffbc000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffbc000 0x4000>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&ssc0_clk>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc1: ssc@fffc0000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffc0000 0x4000>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				clocks = <&ssc1_clk>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc2: ssc@fffc4000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffc4000 0x4000>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
+				clocks = <&ssc2_clk>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			spi0: spi@fffc8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffc8000 0x200>;
+				cs-gpios = <0>, <0>, <0>, <0>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&spi0_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@fffcc000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffcc000 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&spi1_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			ramc: ramc@ffffea00 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffea00 0x200>;
+			};
+
+			matrix: matrix@ffffee00 {
+				compatible = "atmel,at91sam9260-bus-matrix";
+				reg = <0xffffee00 0x200>;
+			};
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <29 30 31>;
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&mck>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x600>;
+
+				atmel,mux-mask =
+				      /*    A         B     */
+				      <0xffffffff 0xfffffff7>,  /* pioA */
+				      <0xffffffff 0xfffffff4>,  /* pioB */
+				      <0xffffffff 0xffffff07>;  /* pioC */
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOA 9  AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				nand {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<AT91_PIOC 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+					};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 17 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc2 {
+					pinctrl_ssc2_tx: ssc2_tx-0 {
+						atmel,pins =
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc2_rx: ssc2_rx-0 {
+						atmel,pins =
+							<AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c_bitbang: i2c-0-bitbang {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>,
+							<AT91_PIOA 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_i2c_twi: i2c-0-twi {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				fb {
+					pinctrl_fb: fb-0 {
+						atmel,pins =
+							<AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioA_clk>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioB_clk>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioC_clk>;
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91rm9200-pmc";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+
+				main_osc: main_osc {
+					compatible = "atmel,at91rm9200-clk-main-osc";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+					clocks = <&main_xtal>;
+				};
+
+				main: mainck {
+					compatible = "atmel,at91rm9200-clk-main";
+					#clock-cells = <0>;
+					clocks = <&main_osc>;
+				};
+
+				plla: pllack {
+					compatible = "atmel,at91rm9200-clk-pll";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+					clocks = <&main>;
+					reg = <0>;
+					atmel,clk-input-range = <1000000 32000000>;
+					#atmel,pll-clk-output-range-cells = <4>;
+					atmel,pll-clk-output-ranges = <80000000 200000000 0 1>,
+								<190000000 240000000 2 1>;
+				};
+
+				pllb: pllbck {
+					compatible = "atmel,at91rm9200-clk-pll";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKB>;
+					clocks = <&main>;
+					reg = <1>;
+					atmel,clk-input-range = <1000000 5000000>;
+					#atmel,pll-clk-output-range-cells = <4>;
+					atmel,pll-clk-output-ranges = <70000000 130000000 1 1>;
+				};
+
+				mck: masterck {
+					compatible = "atmel,at91rm9200-clk-master";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+					clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
+					atmel,clk-output-range = <0 94000000>;
+					atmel,clk-divisors = <1 2 4 0>;
+				};
+
+				usb: usbck {
+					compatible = "atmel,at91rm9200-clk-usb";
+					#clock-cells = <0>;
+					atmel,clk-divisors = <1 2 4 0>;
+					clocks = <&pllb>;
+				};
+
+				prog: progck {
+					compatible = "atmel,at91rm9200-clk-programmable";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupt-parent = <&pmc>;
+					clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
+
+					prog0: prog0 {
+						#clock-cells = <0>;
+						reg = <0>;
+						interrupts = <AT91_PMC_PCKRDY(0)>;
+					};
+
+					prog1: prog1 {
+						#clock-cells = <0>;
+						reg = <1>;
+						interrupts = <AT91_PMC_PCKRDY(1)>;
+					};
+
+					prog2: prog2 {
+						#clock-cells = <0>;
+						reg = <2>;
+						interrupts = <AT91_PMC_PCKRDY(2)>;
+					};
+
+					prog3: prog3 {
+						#clock-cells = <0>;
+						reg = <3>;
+						interrupts = <AT91_PMC_PCKRDY(3)>;
+					};
+				};
+
+				systemck {
+					compatible = "atmel,at91rm9200-clk-system";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					uhpck: uhpck {
+						#clock-cells = <0>;
+						reg = <6>;
+						clocks = <&usb>;
+					};
+
+					udpck: udpck {
+						#clock-cells = <0>;
+						reg = <7>;
+						clocks = <&usb>;
+					};
+
+					pck0: pck0 {
+						#clock-cells = <0>;
+						reg = <8>;
+						clocks = <&prog0>;
+					};
+
+					pck1: pck1 {
+						#clock-cells = <0>;
+						reg = <9>;
+						clocks = <&prog1>;
+					};
+
+					pck2: pck2 {
+						#clock-cells = <0>;
+						reg = <10>;
+						clocks = <&prog2>;
+					};
+
+					pck3: pck3 {
+						#clock-cells = <0>;
+						reg = <11>;
+						clocks = <&prog3>;
+					};
+
+					hclk0: hclk0 {
+						#clock-cells = <0>;
+						reg = <16>;
+						clocks = <&mck>;
+					};
+
+					hclk1: hclk1 {
+						#clock-cells = <0>;
+						reg = <17>;
+						clocks = <&mck>;
+					};
+				};
+
+				periphck {
+					compatible = "atmel,at91rm9200-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&mck>;
+
+					pioA_clk: pioA_clk {
+						#clock-cells = <0>;
+						reg = <2>;
+					};
+
+					pioB_clk: pioB_clk {
+						#clock-cells = <0>;
+						reg = <3>;
+					};
+
+					pioC_clk: pioC_clk {
+						#clock-cells = <0>;
+						reg = <4>;
+					};
+
+					usart0_clk: usart0_clk {
+						#clock-cells = <0>;
+						reg = <6>;
+					};
+
+					usart1_clk: usart1_clk {
+						#clock-cells = <0>;
+						reg = <7>;
+					};
+
+					usart2_clk: usart2_clk {
+						#clock-cells = <0>;
+						reg = <8>;
+					};
+
+					mci0_clk: mci0_clk {
+						#clock-cells = <0>;
+						reg = <9>;
+					};
+
+					udc_clk: udc_clk {
+						#clock-cells = <0>;
+						reg = <10>;
+					};
+
+					twi0_clk: twi0_clk {
+						reg = <11>;
+						#clock-cells = <0>;
+					};
+
+					spi0_clk: spi0_clk {
+						#clock-cells = <0>;
+						reg = <12>;
+					};
+
+					spi1_clk: spi1_clk {
+						#clock-cells = <0>;
+						reg = <13>;
+					};
+
+					ssc0_clk: ssc0_clk {
+						#clock-cells = <0>;
+						reg = <14>;
+					};
+
+					ssc1_clk: ssc1_clk {
+						#clock-cells = <0>;
+						reg = <15>;
+					};
+
+					ssc2_clk: ssc2_clk {
+						#clock-cells = <0>;
+						reg = <16>;
+					};
+
+					tc0_clk: tc0_clk {
+						#clock-cells = <0>;
+						reg = <17>;
+					};
+
+					tc1_clk: tc1_clk {
+						#clock-cells = <0>;
+						reg = <18>;
+					};
+
+					tc2_clk: tc2_clk {
+						#clock-cells = <0>;
+						reg = <19>;
+					};
+
+					ohci_clk: ohci_clk {
+						#clock-cells = <0>;
+						reg = <20>;
+					};
+
+					lcd_clk: lcd_clk {
+						#clock-cells = <0>;
+						reg = <21>;
+					};
+				};
+			};
+
+			rstc@fffffd00 {
+				compatible = "atmel,at91sam9260-rstc";
+				reg = <0xfffffd00 0x10>;
+			};
+
+			shdwc@fffffd10 {
+				compatible = "atmel,at91sam9260-shdwc";
+				reg = <0xfffffd10 0x10>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&mck>;
+			};
+
+			watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				status = "disabled";
+			};
+		};
+	};
+
+	i2c@0 {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_bitbang>;
+		gpios = <&pioA 7 GPIO_ACTIVE_HIGH>, /* sda */
+			<&pioA 8 GPIO_ACTIVE_HIGH>; /* scl */
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
new file mode 100644
index 00000000000..aa35a7aec9a
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9261ek.dts
@@ -0,0 +1,219 @@
+/*
+ * at91sam9261ek.dts - Device Tree file for Atmel at91sam9261 reference board
+ *
+ *  Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
+ *
+ * Licensed under GPLv2 only.
+ */
+/dts-v1/;
+#include "at91sam9261.dtsi"
+
+/ {
+	model = "Atmel at91sam9261ek";
+	compatible = "atmel,at91sam9261ek", "atmel,at91sam9261", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs rw";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	slow_xtal {
+		clock-frequency = <32768>;
+	};
+
+	main_xtal {
+		clock-frequency = <18432000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		usb0: ohci@00500000 {
+			status = "okay";
+		};
+
+		fb0: fb@0x00600000 {
+			display = <&display0>;
+			atmel,power-control-gpio = <&pioA 12 GPIO_ACTIVE_LOW>;
+			status = "okay";
+
+			display0: display {
+				bits-per-pixel = <16>;
+				atmel,lcdcon-backlight;
+				atmel,dmacon = <0x1>;
+				atmel,lcdcon2 = <0x80008002>;
+				atmel,guard-time = <1>;
+				atmel,lcd-wiring-mode = "BRG";
+
+				display-timings {
+					native-mode = <&timing0>;
+					timing0: timing0 {
+						clock-frequency = <4965000>;
+						hactive = <240>;
+						vactive = <320>;
+						hback-porch = <1>;
+						hfront-porch = <33>;
+						vback-porch = <1>;
+						vfront-porch = <0>;
+						hsync-len = <5>;
+						vsync-len = <1>;
+						hsync-active = <1>;
+						vsync-active = <1>;
+					};
+				};
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "bootloader";
+				reg = <0x40000 0x80000>;
+			};
+
+			bootloaderenv@c0000 {
+				label = "bootloader env";
+				reg = <0xc0000 0xc0000>;
+			};
+
+			dtb@180000 {
+				label = "device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+
+		apb {
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioB 29 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			spi0: spi@fffc8000 {
+				cs-gpios = <&pioA 3 0>, <0>, <&pioA 28 0>, <0>;
+				status = "okay";
+
+				mtd_dataflash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					reg = <0>;
+					spi-max-frequency = <15000000>;
+				};
+
+				tsc2046@0 {
+					reg = <2>;
+					compatible = "ti,ads7843";
+					interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>;
+					spi-max-frequency = <3000000>;
+					pendown-gpio = <&pioC 2 GPIO_ACTIVE_HIGH>;
+
+					ti,x-min = /bits/ 16 <150>;
+					ti,x-max = /bits/ 16 <3830>;
+					ti,y-min = /bits/ 16 <190>;
+					ti,y-max = /bits/ 16 <3830>;
+					ti,vref-delay-usecs = /bits/ 16 <450>;
+					ti,x-plate-ohms = /bits/ 16 <450>;
+					ti,y-plate-ohms = /bits/ 16 <250>;
+					ti,pressure-max = /bits/ 16 <15000>;
+					ti,debounce-rep = /bits/ 16 <0>;
+					ti,debounce-tol = /bits/ 16 <65535>;
+					ti,debounce-max = /bits/ 16 <1>;
+
+					linux,wakeup;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds8 {
+			label = "ds8";
+			gpios = <&pioA 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		ds7 {
+			label = "ds7";
+			gpios = <&pioA 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "nand-disk";
+		};
+
+		ds1 {
+			label = "ds1";
+			gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button_0 {
+			label = "button_0";
+			gpios = <&pioA 27 GPIO_ACTIVE_LOW>;
+			linux,code = <256>;
+			gpio-key,wakeup;
+		};
+
+		button_1 {
+			label = "button_1";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			linux,code = <257>;
+			gpio-key,wakeup;
+		};
+
+		button_2 {
+			label = "button_2";
+			gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
+			linux,code = <258>;
+			gpio-key,wakeup;
+		};
+
+		button_3 {
+			label = "button_3";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			linux,code = <259>;
+			gpio-key,wakeup;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 0042f73068b..fece8665fb6 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -523,7 +523,7 @@
 			};
 
 			i2c0: i2c@fff88000 {
-				compatible = "atmel,at91sam9263-i2c";
+				compatible = "atmel,at91sam9260-i2c";
 				reg = <0xfff88000 0x100>;
 				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
 				#address-cells = <1>;
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index cbcc058b26b..ace6bf197b7 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -136,6 +136,36 @@
 				      >;
 
 				/* shared pinctrl settings */
+				adc0 {
+					pinctrl_adc0_adtrg: adc0_adtrg {
+						atmel,pins = <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad0: adc0_ad0 {
+						atmel,pins = <AT91_PIOD 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad1: adc0_ad1 {
+						atmel,pins = <AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad2: adc0_ad2 {
+						atmel,pins = <AT91_PIOD 22 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad3: adc0_ad3 {
+						atmel,pins = <AT91_PIOD 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad4: adc0_ad4 {
+						atmel,pins = <AT91_PIOD 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad5: adc0_ad5 {
+						atmel,pins = <AT91_PIOD 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad6: adc0_ad6 {
+						atmel,pins = <AT91_PIOD 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad7: adc0_ad7 {
+						atmel,pins = <AT91_PIOD 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
@@ -632,40 +662,40 @@
 			};
 
 			adc0: adc@fffb0000 {
-				compatible = "atmel,at91sam9260-adc";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91sam9g45-adc";
 				reg = <0xfffb0000 0x100>;
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
-				atmel,adc-use-external-triggers;
 				atmel,adc-channels-used = <0xff>;
 				atmel,adc-vref = <3300>;
-				atmel,adc-num-channels = <8>;
 				atmel,adc-startup-time = <40>;
-				atmel,adc-channel-base = <0x30>;
-				atmel,adc-drdy-mask = <0x10000>;
-				atmel,adc-status-register = <0x1c>;
-				atmel,adc-trigger-register = <0x08>;
 				atmel,adc-res = <8 10>;
 				atmel,adc-res-names = "lowres", "highres";
 				atmel,adc-use-res = "highres";
 
 				trigger@0 {
+					reg = <0>;
 					trigger-name = "external-rising";
 					trigger-value = <0x1>;
 					trigger-external;
 				};
 				trigger@1 {
+					reg = <1>;
 					trigger-name = "external-falling";
 					trigger-value = <0x2>;
 					trigger-external;
 				};
 
 				trigger@2 {
+					reg = <2>;
 					trigger-name = "external-any";
 					trigger-value = <0x3>;
 					trigger-external;
 				};
 
 				trigger@3 {
+					reg = <3>;
 					trigger-name = "continuous";
 					trigger-value = <0x6>;
 				};
@@ -817,6 +847,7 @@
 			      >;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
+			atmel,nand-has-dma;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
 			gpios = <&pioC 8 GPIO_ACTIVE_HIGH
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 7ff665a8c70..9f5b0a67499 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -8,6 +8,7 @@
  */
 /dts-v1/;
 #include "at91sam9g45.dtsi"
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "Atmel AT91SAM9M10G45-EK";
@@ -130,6 +131,21 @@
 				status = "okay";
 			};
 
+			adc0: adc@fffb0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					&pinctrl_adc0_ad5
+					&pinctrl_adc0_ad6
+					&pinctrl_adc0_ad7>;
+				atmel,adc-ts-wires = <4>;
+				status = "okay";
+			};
+
 			pwm0: pwm@fffb8000 {
 				status = "okay";
 
@@ -216,14 +232,14 @@
 
 		d6 {
 			label = "d6";
-			pwms = <&pwm0 3 5000 0>;
+			pwms = <&pwm0 3 5000 PWM_POLARITY_INVERTED>;
 			max-brightness = <255>;
 			linux,default-trigger = "nand-disk";
 		};
 
 		d7 {
 			label = "d7";
-			pwms = <&pwm0 1 5000 0>;
+			pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
 			max-brightness = <255>;
 			linux,default-trigger = "mmc0";
 		};
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 394e6ce2afb..b84bac5bada 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -12,6 +12,7 @@
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
 
 / {
 	model = "Atmel AT91SAM9N12 SoC";
@@ -49,6 +50,18 @@
 		reg = <0x20000000 0x10000000>;
 	};
 
+	slow_xtal: slow_xtal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	main_xtal: main_xtal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -75,8 +88,280 @@
 			};
 
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91rm9200-pmc";
-				reg = <0xfffffc00 0x100>;
+				compatible = "atmel,at91sam9n12-pmc";
+				reg = <0xfffffc00 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+
+				main_rc_osc: main_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-main-rc-osc";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCRCS>;
+					clock-frequency = <12000000>;
+					clock-accuracy = <50000000>;
+				};
+
+				main_osc: main_osc {
+					compatible = "atmel,at91rm9200-clk-main-osc";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+					clocks = <&main_xtal>;
+				};
+
+				main: mainck {
+					compatible = "atmel,at91sam9x5-clk-main";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCSELS>;
+					clocks = <&main_rc_osc>, <&main_osc>;
+				};
+
+				plla: pllack {
+					compatible = "atmel,at91rm9200-clk-pll";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+					clocks = <&main>;
+					reg = <0>;
+					atmel,clk-input-range = <2000000 32000000>;
+					#atmel,pll-clk-output-range-cells = <4>;
+					atmel,pll-clk-output-ranges = <745000000 800000000 0 0>,
+								      <695000000 750000000 1 0>,
+								      <645000000 700000000 2 0>,
+								      <595000000 650000000 3 0>,
+								      <545000000 600000000 0 1>,
+								      <495000000 555000000 1 1>,
+								      <445000000 500000000 2 1>,
+								      <400000000 450000000 3 1>;
+				};
+
+				plladiv: plladivck {
+					compatible = "atmel,at91sam9x5-clk-plldiv";
+					#clock-cells = <0>;
+					clocks = <&plla>;
+				};
+
+				pllb: pllbck {
+					compatible = "atmel,at91rm9200-clk-pll";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKB>;
+					clocks = <&main>;
+					reg = <1>;
+					atmel,clk-input-range = <2000000 32000000>;
+					#atmel,pll-clk-output-range-cells = <3>;
+					atmel,pll-clk-output-ranges = <30000000 100000000 0>;
+				};
+
+				mck: masterck {
+					compatible = "atmel,at91sam9x5-clk-master";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&pllb>;
+					atmel,clk-output-range = <0 133333333>;
+					atmel,clk-divisors = <1 2 4 3>;
+					atmel,master-clk-have-div3-pres;
+				};
+
+				usb: usbck {
+					compatible = "atmel,at91sam9n12-clk-usb";
+					#clock-cells = <0>;
+					clocks = <&pllb>;
+				};
+
+				prog: progck {
+					compatible = "atmel,at91sam9x5-clk-programmable";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupt-parent = <&pmc>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&pllb>, <&mck>;
+
+					prog0: prog0 {
+						#clock-cells = <0>;
+						reg = <0>;
+						interrupts = <AT91_PMC_PCKRDY(0)>;
+					};
+
+					prog1: prog1 {
+						#clock-cells = <0>;
+						reg = <1>;
+						interrupts = <AT91_PMC_PCKRDY(1)>;
+					};
+				};
+
+				systemck {
+					compatible = "atmel,at91rm9200-clk-system";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					ddrck: ddrck {
+						#clock-cells = <0>;
+						reg = <2>;
+						clocks = <&mck>;
+					};
+
+					lcdck: lcdck {
+						#clock-cells = <0>;
+						reg = <3>;
+						clocks = <&mck>;
+					};
+
+					uhpck: uhpck {
+						#clock-cells = <0>;
+						reg = <6>;
+						clocks = <&usb>;
+					};
+
+					udpck: udpck {
+						#clock-cells = <0>;
+						reg = <7>;
+						clocks = <&usb>;
+					};
+
+					pck0: pck0 {
+						#clock-cells = <0>;
+						reg = <8>;
+						clocks = <&prog0>;
+					};
+
+					pck1: pck1 {
+						#clock-cells = <0>;
+						reg = <9>;
+						clocks = <&prog1>;
+					};
+				};
+
+				periphck {
+					compatible = "atmel,at91sam9x5-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&mck>;
+
+					pioAB_clk: pioAB_clk {
+						#clock-cells = <0>;
+						reg = <2>;
+					};
+
+					pioCD_clk: pioCD_clk {
+						#clock-cells = <0>;
+						reg = <3>;
+					};
+
+					fuse_clk: fuse_clk {
+						#clock-cells = <0>;
+						reg = <4>;
+					};
+
+					usart0_clk: usart0_clk {
+						#clock-cells = <0>;
+						reg = <5>;
+					};
+
+					usart1_clk: usart1_clk {
+						#clock-cells = <0>;
+						reg = <6>;
+					};
+
+					usart2_clk: usart2_clk {
+						#clock-cells = <0>;
+						reg = <7>;
+					};
+
+					usart3_clk: usart3_clk {
+						#clock-cells = <0>;
+						reg = <8>;
+					};
+
+					twi0_clk: twi0_clk {
+						reg = <9>;
+						#clock-cells = <0>;
+					};
+
+					twi1_clk: twi1_clk {
+						#clock-cells = <0>;
+						reg = <10>;
+					};
+
+					mci0_clk: mci0_clk {
+						#clock-cells = <0>;
+						reg = <12>;
+					};
+
+					spi0_clk: spi0_clk {
+						#clock-cells = <0>;
+						reg = <13>;
+					};
+
+					spi1_clk: spi1_clk {
+						#clock-cells = <0>;
+						reg = <14>;
+					};
+
+					uart0_clk: uart0_clk {
+						#clock-cells = <0>;
+						reg = <15>;
+					};
+
+					uart1_clk: uart1_clk {
+						#clock-cells = <0>;
+						reg = <16>;
+					};
+
+					tcb_clk: tcb_clk {
+						#clock-cells = <0>;
+						reg = <17>;
+					};
+
+					pwm_clk: pwm_clk {
+						#clock-cells = <0>;
+						reg = <18>;
+					};
+
+					adc_clk: adc_clk {
+						#clock-cells = <0>;
+						reg = <19>;
+					};
+
+					dma0_clk: dma0_clk {
+						#clock-cells = <0>;
+						reg = <20>;
+					};
+
+					uhphs_clk: uhphs_clk {
+						#clock-cells = <0>;
+						reg = <22>;
+					};
+
+					udphs_clk: udphs_clk {
+						#clock-cells = <0>;
+						reg = <23>;
+					};
+
+					lcdc_clk: lcdc_clk {
+						#clock-cells = <0>;
+						reg = <25>;
+					};
+
+					sha_clk: sha_clk {
+						#clock-cells = <0>;
+						reg = <27>;
+					};
+
+					ssc0_clk: ssc0_clk {
+						#clock-cells = <0>;
+						reg = <28>;
+					};
+
+					aes_clk: aes_clk {
+						#clock-cells = <0>;
+						reg = <29>;
+					};
+
+					trng_clk: trng_clk {
+						#clock-cells = <0>;
+						reg = <30>;
+					};
+				};
 			};
 
 			rstc@fffffe00 {
@@ -88,6 +373,7 @@
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffe30 0xf>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&mck>;
 			};
 
 			shdwc@fffffe10 {
@@ -95,12 +381,38 @@
 				reg = <0xfffffe10 0x10>;
 			};
 
+			sckc@fffffe50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffe50 0x4>;
+
+				slow_osc: slow_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-osc";
+					#clock-cells = <0>;
+					clocks = <&slow_xtal>;
+				};
+
+				slow_rc_osc: slow_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+					#clock-cells = <0>;
+					clock-frequency = <32768>;
+					clock-accuracy = <50000000>;
+				};
+
+				clk32k: slck {
+					compatible = "atmel,at91sam9x5-clk-slow";
+					#clock-cells = <0>;
+					clocks = <&slow_rc_osc>, <&slow_osc>;
+				};
+			};
+
 			mmc0: mmc@f0008000 {
 				compatible = "atmel,hsmci";
 				reg = <0xf0008000 0x600>;
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
+				clocks = <&mci0_clk>;
+				clock-names = "mci_clk";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -110,12 +422,16 @@
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf8008000 0x100>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb_clk>;
+				clock-names = "t0_clk";
 			};
 
 			tcb1: timer@f800c000 {
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf800c000 0x100>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb_clk>;
+				clock-names = "t0_clk";
 			};
 
 			dma: dma-controller@ffffec00 {
@@ -123,6 +439,8 @@
 				reg = <0xffffec00 0x200>;
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
 				#dma-cells = <2>;
+				clocks = <&dma0_clk>;
+				clock-names = "dma_clk";
 			};
 
 			pinctrl@fffff400 {
@@ -392,6 +710,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
+					clocks = <&pioAB_clk>;
 				};
 
 				pioB: gpio@fffff600 {
@@ -402,6 +721,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
+					clocks = <&pioAB_clk>;
 				};
 
 				pioC: gpio@fffff800 {
@@ -412,6 +732,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
+					clocks = <&pioCD_clk>;
 				};
 
 				pioD: gpio@fffffa00 {
@@ -422,6 +743,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
+					clocks = <&pioCD_clk>;
 				};
 			};
 
@@ -431,6 +753,8 @@
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&mck>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
@@ -443,6 +767,8 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&ssc0_clk>;
+				clock-names = "pclk";
 				status = "disabled";
 			};
 
@@ -452,6 +778,8 @@
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&usart0_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
@@ -461,6 +789,8 @@
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&usart1_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
@@ -470,6 +800,8 @@
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&usart2_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
@@ -479,6 +811,8 @@
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&usart3_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
@@ -493,6 +827,7 @@
 				#size-cells = <0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_i2c0>;
+				clocks = <&twi0_clk>;
 				status = "disabled";
 			};
 
@@ -507,6 +842,7 @@
 				#size-cells = <0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_i2c1>;
+				clocks = <&twi1_clk>;
 				status = "disabled";
 			};
 
@@ -521,6 +857,8 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&spi0_clk>;
+				clock-names = "spi_clk";
 				status = "disabled";
 			};
 
@@ -535,6 +873,8 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&spi1_clk>;
+				clock-names = "spi_clk";
 				status = "disabled";
 			};
 
@@ -554,6 +894,7 @@
 				reg = <0xf8034000 0x300>;
 				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
 				#pwm-cells = <3>;
+				clocks = <&pwm_clk>;
 				status = "disabled";
 			};
 		};
@@ -570,6 +911,7 @@
 			atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
+			atmel,nand-has-dma;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
 			gpios = <&pioD 5 GPIO_ACTIVE_HIGH
@@ -583,6 +925,9 @@
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00500000 0x00100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>,
+				 <&uhpck>;
+			clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index e9487f6f016..64bbe46e4f9 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -21,6 +21,14 @@
 		reg = <0x20000000 0x8000000>;
 	};
 
+	slow_xtal {
+		clock-frequency = <32768>;
+	};
+
+	main_xtal {
+		clock-frequency = <16000000>;
+	};
+
 	clocks {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -124,6 +132,10 @@
 			nand-on-flash-bbt;
 			status = "okay";
 		};
+
+		usb0: ohci@00500000 {
+			status = "okay";
+		};
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
new file mode 100644
index 00000000000..1da183155ee
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -0,0 +1,1082 @@
+/*
+ * at91sam9rl.dtsi - Device Tree Include file for AT91SAM9RL family SoC
+ *
+ *  Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Atmel AT91SAM9RL family SoC";
+	compatible = "atmel,at91sam9rl", "atmel,at91sam9";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		pwm0 = &pwm0;
+	};
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+		};
+	};
+
+	memory {
+		reg = <0x20000000 0x04000000>;
+	};
+
+	slow_xtal: slow_xtal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	main_xtal: main_xtal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	clocks {
+		adc_op_clk: adc_op_clk{
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+		};
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		fb0: fb@00500000 {
+			compatible = "atmel,at91sam9rl-lcdc";
+			reg = <0x00500000 0x1000>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fb>;
+			clocks = <&lcd_clk>, <&lcd_clk>;
+			clock-names = "hclk", "lcdc_clk";
+			status = "disabled";
+		};
+
+		nand0: nand@40000000 {
+			compatible = "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40000000 0x10000000>,
+			      <0xffffe800 0x200>;
+			atmel,nand-addr-offset = <21>;
+			atmel,nand-cmd-offset = <22>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			gpios = <&pioD 17 GPIO_ACTIVE_HIGH>,
+				<&pioB 6 GPIO_ACTIVE_HIGH>,
+				<0>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			tcb0: timer@fffa0000 {
+				compatible = "atmel,at91rm9200-tcb";
+				reg = <0xfffa0000 0x100>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <17 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <18 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk";
+			};
+
+			mmc0: mmc@fffa4000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffa4000 0x600>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				clocks = <&mci0_clk>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@fffa8000 {
+				compatible = "atmel,at91sam9260-i2c";
+				reg = <0xfffa8000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi0_clk>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@fffac000 {
+				compatible = "atmel,at91sam9260-i2c";
+				reg = <0xfffac000 0x100>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			usart0: serial@fffb0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb0000 0x200>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&usart0_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fffb4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb4000 0x200>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&usart1_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fffb8000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb8000 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&usart2_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@fffbc000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffbc000 0x200>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&usart3_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc0: ssc@fffc0000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffc0000 0x4000>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				status = "disabled";
+			};
+
+			ssc1: ssc@fffc4000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffc4000 0x4000>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				status = "disabled";
+			};
+
+			pwm0: pwm@fffc8000 {
+				compatible = "atmel,at91sam9rl-pwm";
+				reg = <0xfffc8000 0x300>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pwm_clk>;
+				clock-names = "pwm_clk";
+				status = "disabled";
+			};
+
+			spi0: spi@fffcc000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffcc000 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&spi0_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			adc0: adc@fffd0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91sam9rl-adc";
+				reg = <0xfffd0000 0x100>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&adc_clk>, <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-use-external-triggers;
+				atmel,adc-channels-used = <0x3f>;
+				atmel,adc-vref = <3300>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-res = <8 10>;
+				atmel,adc-res-names = "lowres", "highres";
+				atmel,adc-use-res = "highres";
+
+				trigger@0 {
+					reg = <0>;
+					trigger-name = "timer-counter-0";
+					trigger-value = <0x1>;
+				};
+				trigger@1 {
+					reg = <1>;
+					trigger-name = "timer-counter-1";
+					trigger-value = <0x3>;
+				};
+
+				trigger@2 {
+					reg = <2>;
+					trigger-name = "timer-counter-2";
+					trigger-value = <0x5>;
+				};
+
+				trigger@3 {
+					reg = <3>;
+					trigger-name = "external";
+					trigger-value = <0x13>;
+					trigger-external;
+				};
+			};
+
+			usb0: gadget@fffd4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91sam9rl-udc";
+				reg = <0x00600000 0x100000>,
+				      <0xfffd4000 0x4000>;
+				interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&udphs_clk>, <&utmi>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+
+				ep0 {
+					reg = <0>;
+					atmel,fifo-size = <64>;
+					atmel,nb-banks = <1>;
+				};
+
+				ep1 {
+					reg = <1>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <2>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+
+				ep2 {
+					reg = <2>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <2>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+
+				ep3 {
+					reg = <3>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+				};
+
+				ep4 {
+					reg = <4>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+				};
+
+				ep5 {
+					reg = <5>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+
+				ep6 {
+					reg = <6>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+			};
+
+			ramc0: ramc@ffffea00 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffea00 0x200>;
+			};
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <31>;
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&mck>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+
+				atmel,mux-mask =
+					/*    A         B     */
+					<0xffffffff 0xe05c6738>,  /* pioA */
+					<0xffffffff 0x0000c780>,  /* pioB */
+					<0xffffffff 0xe3ffff0e>,  /* pioC */
+					<0x003fffff 0x0001ff3c>;  /* pioD */
+
+				/* shared pinctrl settings */
+				adc0 {
+					pinctrl_adc0_ts: adc0_ts-0 {
+						atmel,pins =
+							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad0: adc0_ad0-0 {
+						atmel,pins = <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad1: adc0_ad1-0 {
+						atmel,pins = <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad2: adc0_ad2-0 {
+						atmel,pins = <AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad3: adc0_ad3-0 {
+						atmel,pins = <AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad4: adc0_ad4-0 {
+						atmel,pins = <AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad5: adc0_ad5-0 {
+						atmel,pins = <AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_adtrg: adc0_adtrg-0 {
+						atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				fb {
+					pinctrl_fb: fb-0 {
+						atmel,pins =
+							<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 15 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c_gpio0 {
+					pinctrl_i2c_gpio0: i2c_gpio0-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>,
+							<AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+					};
+				};
+
+				i2c_gpio1 {
+					pinctrl_i2c_gpio1: i2c_gpio1-0 {
+						atmel,pins =
+							<AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>,
+							<AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				nand {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOB 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand0_ale_cle: nand_ale_cle-0 {
+						atmel,pins =
+							<AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_nand0_oe_we: nand_oe_we-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_nand0_cs: nand_cs-0 {
+						atmel,pins =
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pwm0 {
+					pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
+						atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
+						atmel,pins = <AT91_PIOC 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
+						atmel,pins = <AT91_PIOD 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
+						atmel,pins = <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
+						atmel,pins = <AT91_PIOC 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
+						atmel,pins = <AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
+						atmel,pins = <AT91_PIOD 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
+						atmel,pins = <AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm2_2: pwm0_pwm2-2 {
+						atmel,pins = <AT91_PIOD 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
+						atmel,pins = <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
+						atmel,pins = <AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOD 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
+						atmel,pins =
+							<AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_dcd: usart0_dcd-0 {
+						atmel,pins =
+							<AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_ri: usart0_ri-0 {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_sck: usart0_sck-0 {
+						atmel,pins =
+							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_sck: usart1_sck-0 {
+						atmel,pins =
+							<AT91_PIOD 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_sck: usart2_sck-0 {
+						atmel,pins =
+							<AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOD 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOD 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart3_sck: usart3_sck-0 {
+						atmel,pins =
+							<AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioA_clk>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioB_clk>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioC_clk>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioD_clk>;
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91sam9g45-pmc";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+
+				main: mainck {
+					compatible = "atmel,at91rm9200-clk-main";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+					clocks = <&main_xtal>;
+				};
+
+				plla: pllack {
+					compatible = "atmel,at91rm9200-clk-pll";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+					clocks = <&main>;
+					reg = <0>;
+					atmel,clk-input-range = <1000000 32000000>;
+					#atmel,pll-clk-output-range-cells = <3>;
+					atmel,pll-clk-output-ranges = <80000000 200000000 0>,
+								<190000000 240000000 2>;
+				};
+
+				utmi: utmick {
+					compatible = "atmel,at91sam9x5-clk-utmi";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_LOCKU>;
+					clocks = <&main>;
+				};
+
+				mck: masterck {
+					compatible = "atmel,at91rm9200-clk-master";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+					clocks = <&clk32k>, <&main>, <&plla>, <&utmi>;
+					atmel,clk-output-range = <0 94000000>;
+					atmel,clk-divisors = <1 2 4 0>;
+				};
+
+				prog: progck {
+					compatible = "atmel,at91rm9200-clk-programmable";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupt-parent = <&pmc>;
+					clocks = <&clk32k>, <&main>, <&plla>, <&utmi>, <&mck>;
+
+					prog0: prog0 {
+						#clock-cells = <0>;
+						reg = <0>;
+						interrupts = <AT91_PMC_PCKRDY(0)>;
+					};
+
+					prog1: prog1 {
+						#clock-cells = <0>;
+						reg = <1>;
+						interrupts = <AT91_PMC_PCKRDY(1)>;
+					};
+				};
+
+				systemck {
+					compatible = "atmel,at91rm9200-clk-system";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pck0: pck0 {
+						#clock-cells = <0>;
+						reg = <8>;
+						clocks = <&prog0>;
+					};
+
+					pck1: pck1 {
+						#clock-cells = <0>;
+						reg = <9>;
+						clocks = <&prog1>;
+					};
+
+				};
+
+				periphck {
+					compatible = "atmel,at91rm9200-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&mck>;
+
+					pioA_clk: pioA_clk {
+						#clock-cells = <0>;
+						reg = <2>;
+					};
+
+					pioB_clk: pioB_clk {
+						#clock-cells = <0>;
+						reg = <3>;
+					};
+
+					pioC_clk: pioC_clk {
+						#clock-cells = <0>;
+						reg = <4>;
+					};
+
+					pioD_clk: pioD_clk {
+						#clock-cells = <0>;
+						reg = <5>;
+					};
+
+					usart0_clk: usart0_clk {
+						#clock-cells = <0>;
+						reg = <6>;
+					};
+
+					usart1_clk: usart1_clk {
+						#clock-cells = <0>;
+						reg = <7>;
+					};
+
+					usart2_clk: usart2_clk {
+						#clock-cells = <0>;
+						reg = <8>;
+					};
+
+					usart3_clk: usart3_clk {
+						#clock-cells = <0>;
+						reg = <9>;
+					};
+
+					mci0_clk: mci0_clk {
+						#clock-cells = <0>;
+						reg = <10>;
+					};
+
+					twi0_clk: twi0_clk {
+						#clock-cells = <0>;
+						reg = <11>;
+					};
+
+					twi1_clk: twi1_clk {
+						#clock-cells = <0>;
+						reg = <12>;
+					};
+
+					spi0_clk: spi0_clk {
+						#clock-cells = <0>;
+						reg = <13>;
+					};
+
+					ssc0_clk: ssc0_clk {
+						#clock-cells = <0>;
+						reg = <14>;
+					};
+
+					ssc1_clk: ssc1_clk {
+						#clock-cells = <0>;
+						reg = <15>;
+					};
+
+					tc0_clk: tc0_clk {
+						#clock-cells = <0>;
+						reg = <16>;
+					};
+
+					tc1_clk: tc1_clk {
+						#clock-cells = <0>;
+						reg = <17>;
+					};
+
+					tc2_clk: tc2_clk {
+						#clock-cells = <0>;
+						reg = <18>;
+					};
+
+					pwm_clk: pwm_clk {
+						#clock-cells = <0>;
+						reg = <19>;
+					};
+
+					adc_clk: adc_clk {
+						#clock-cells = <0>;
+						reg = <20>;
+					};
+
+					dma0_clk: dma0_clk {
+						#clock-cells = <0>;
+						reg = <21>;
+					};
+
+					udphs_clk: udphs_clk {
+						#clock-cells = <0>;
+						reg = <22>;
+					};
+
+					lcd_clk: lcd_clk {
+						#clock-cells = <0>;
+						reg = <23>;
+					};
+				};
+			};
+
+			rstc@fffffd00 {
+				compatible = "atmel,at91sam9260-rstc";
+				reg = <0xfffffd00 0x10>;
+			};
+
+			shdwc@fffffd10 {
+				compatible = "atmel,at91sam9260-shdwc";
+				reg = <0xfffffd10 0x10>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&mck>;
+			};
+
+			watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				status = "disabled";
+			};
+
+			sckc@fffffd50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffd50 0x4>;
+
+				slow_osc: slow_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-osc";
+					#clock-cells = <0>;
+					atmel,startup-time-usec = <1200000>;
+					clocks = <&slow_xtal>;
+				};
+
+				slow_rc_osc: slow_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+					#clock-cells = <0>;
+					atmel,startup-time-usec = <75>;
+					clock-frequency = <32768>;
+					clock-accuracy = <50000000>;
+				};
+
+				clk32k: slck {
+					compatible = "atmel,at91sam9x5-clk-slow";
+					#clock-cells = <0>;
+					clocks = <&slow_rc_osc &slow_osc>;
+				};
+			};
+		};
+	};
+
+	i2c@0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 23 GPIO_ACTIVE_HIGH>, /* sda */
+			<&pioA 24 GPIO_ACTIVE_HIGH>; /* scl */
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio0>;
+		status = "disabled";
+	};
+
+	i2c@1 {
+		compatible = "i2c-gpio";
+		gpios = <&pioD 10 GPIO_ACTIVE_HIGH>, /* sda */
+			<&pioD 11 GPIO_ACTIVE_HIGH>; /* scl */
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio1>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts
new file mode 100644
index 00000000000..d4a010e40fe
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9rlek.dts
@@ -0,0 +1,248 @@
+/*
+ * at91sam9rlek.dts - Device Tree file for Atmel at91sam9rl reference board
+ *
+ *  Copyright (C) 2014  Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ *
+ * Licensed under GPLv2 only
+ */
+/dts-v1/;
+#include "at91sam9rl.dtsi"
+
+/ {
+	model = "Atmel at91sam9rlek";
+	compatible = "atmel,at91sam9rlek", "atmel,at91sam9rl", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 rootfstype=ubifs root=ubi0:rootfs ubi.mtd=5 rw";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+
+	slow_xtal {
+		clock-frequency = <32768>;
+	};
+
+	main_xtal {
+		clock-frequency = <12000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		fb0: fb@00500000 {
+			display = <&display0>;
+			status = "okay";
+
+			display0: display {
+				bits-per-pixel = <16>;
+				atmel,lcdcon-backlight;
+				atmel,dmacon = <0x1>;
+				atmel,lcdcon2 = <0x80008002>;
+				atmel,guard-time = <1>;
+				atmel,lcd-wiring-mode = "RGB";
+
+				display-timings {
+					native-mode = <&timing0>;
+					timing0: timing0 {
+						clock-frequency = <4965000>;
+						hactive = <240>;
+						vactive = <320>;
+						hback-porch = <1>;
+						hfront-porch = <33>;
+						vback-porch = <1>;
+						vfront-porch = <0>;
+						hsync-len = <5>;
+						vsync-len = <1>;
+						hsync-active = <1>;
+						vsync-active = <1>;
+					};
+				};
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt = <1>;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "bootloader";
+				reg = <0x40000 0x80000>;
+			};
+
+			bootloaderenv@c0000 {
+				label = "bootloader env";
+				reg = <0xc0000 0xc0000>;
+			};
+
+			dtb@180000 {
+				label = "device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+
+		apb {
+			mmc0: mmc@fffa4000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot0_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 = <
+					&pinctrl_usart0
+					&pinctrl_usart0_rts
+					&pinctrl_usart0_cts>;
+				status = "okay";
+			};
+
+			adc0: adc@fffd0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					&pinctrl_adc0_ad5
+					&pinctrl_adc0_adtrg>;
+				atmel,adc-ts-wires = <4>;
+				status = "okay";
+			};
+
+			usb0: gadget@fffd4000 {
+				atmel,vbus-gpio = <&pioA 8 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			spi0: spi@fffcc000 {
+				status = "okay";
+				cs-gpios = <&pioA 28 0>, <0>, <0>, <0>;
+				mtd_dataflash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <15000000>;
+					reg = <0>;
+				};
+			};
+
+			pwm0: pwm@fffc8000 {
+				status = "okay";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm0_pwm1_2>,
+					<&pinctrl_pwm0_pwm2_2>;
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOA 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				main: mainck {
+					clock-frequency = <12000000>;
+				};
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+		};
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		ds1 {
+			label = "ds1";
+			pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+		};
+
+		ds2 {
+			label = "ds2";
+			pwms = <&pwm0 2 5000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds3 {
+			label = "ds3";
+			gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		right_click {
+			label = "right_click";
+			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
+			linux,code = <273>;
+			gpio-key,wakeup;
+		};
+
+		left_click {
+			label = "left_click";
+			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
+			linux,code = <272>;
+			gpio-key,wakeup;
+		};
+	};
+
+	i2c@0 {
+		status = "okay";
+	};
+
+	i2c@1 {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 174219de92f..2c0d6ea3ab4 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -14,6 +14,7 @@
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
 
 / {
 	model = "Atmel AT91SAM9x5 family SoC";
@@ -51,6 +52,24 @@
 		reg = <0x20000000 0x10000000>;
 	};
 
+	slow_xtal: slow_xtal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	main_xtal: main_xtal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	adc_op_clk: adc_op_clk{
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <5000000>;
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -77,8 +96,272 @@
 			};
 
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91rm9200-pmc";
+				compatible = "atmel,at91sam9x5-pmc";
 				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+
+				main_rc_osc: main_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-main-rc-osc";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCRCS>;
+					clock-frequency = <12000000>;
+					clock-accuracy = <50000000>;
+				};
+
+				main_osc: main_osc {
+					compatible = "atmel,at91rm9200-clk-main-osc";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+					clocks = <&main_xtal>;
+				};
+
+				main: mainck {
+					compatible = "atmel,at91sam9x5-clk-main";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCSELS>;
+					clocks = <&main_rc_osc>, <&main_osc>;
+				};
+
+				plla: pllack {
+					compatible = "atmel,at91rm9200-clk-pll";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+					clocks = <&main>;
+					reg = <0>;
+					atmel,clk-input-range = <2000000 32000000>;
+					#atmel,pll-clk-output-range-cells = <4>;
+					atmel,pll-clk-output-ranges = <745000000 800000000 0 0
+								       695000000 750000000 1 0
+								       645000000 700000000 2 0
+								       595000000 650000000 3 0
+								       545000000 600000000 0 1
+								       495000000 555000000 1 1
+								       445000000 500000000 2 1
+								       400000000 450000000 3 1>;
+				};
+
+				plladiv: plladivck {
+					compatible = "atmel,at91sam9x5-clk-plldiv";
+					#clock-cells = <0>;
+					clocks = <&plla>;
+				};
+
+				utmi: utmick {
+					compatible = "atmel,at91sam9x5-clk-utmi";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKU>;
+					clocks = <&main>;
+				};
+
+				mck: masterck {
+					compatible = "atmel,at91sam9x5-clk-master";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
+					atmel,clk-output-range = <0 133333333>;
+					atmel,clk-divisors = <1 2 4 3>;
+					atmel,master-clk-have-div3-pres;
+				};
+
+				usb: usbck {
+					compatible = "atmel,at91sam9x5-clk-usb";
+					#clock-cells = <0>;
+					clocks = <&plladiv>, <&utmi>;
+				};
+
+				prog: progck {
+					compatible = "atmel,at91sam9x5-clk-programmable";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupt-parent = <&pmc>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+					prog0: prog0 {
+						#clock-cells = <0>;
+						reg = <0>;
+						interrupts = <AT91_PMC_PCKRDY(0)>;
+					};
+
+					prog1: prog1 {
+						#clock-cells = <0>;
+						reg = <1>;
+						interrupts = <AT91_PMC_PCKRDY(1)>;
+					};
+				};
+
+				smd: smdclk {
+					compatible = "atmel,at91sam9x5-clk-smd";
+					#clock-cells = <0>;
+					clocks = <&plladiv>, <&utmi>;
+				};
+
+				systemck {
+					compatible = "atmel,at91rm9200-clk-system";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					ddrck: ddrck {
+						#clock-cells = <0>;
+						reg = <2>;
+						clocks = <&mck>;
+					};
+
+					smdck: smdck {
+						#clock-cells = <0>;
+						reg = <4>;
+						clocks = <&smd>;
+					};
+
+					uhpck: uhpck {
+						#clock-cells = <0>;
+						reg = <6>;
+						clocks = <&usb>;
+					};
+
+					udpck: udpck {
+						#clock-cells = <0>;
+						reg = <7>;
+						clocks = <&usb>;
+					};
+
+					pck0: pck0 {
+						#clock-cells = <0>;
+						reg = <8>;
+						clocks = <&prog0>;
+					};
+
+					pck1: pck1 {
+						#clock-cells = <0>;
+						reg = <9>;
+						clocks = <&prog1>;
+					};
+				};
+
+				periphck {
+					compatible = "atmel,at91sam9x5-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&mck>;
+
+					pioAB_clk: pioAB_clk {
+						#clock-cells = <0>;
+						reg = <2>;
+					};
+
+					pioCD_clk: pioCD_clk {
+						#clock-cells = <0>;
+						reg = <3>;
+					};
+
+					smd_clk: smd_clk {
+						#clock-cells = <0>;
+						reg = <4>;
+					};
+
+					usart0_clk: usart0_clk {
+						#clock-cells = <0>;
+						reg = <5>;
+					};
+
+					usart1_clk: usart1_clk {
+						#clock-cells = <0>;
+						reg = <6>;
+					};
+
+					usart2_clk: usart2_clk {
+						#clock-cells = <0>;
+						reg = <7>;
+					};
+
+					twi0_clk: twi0_clk {
+						reg = <9>;
+						#clock-cells = <0>;
+					};
+
+					twi1_clk: twi1_clk {
+						#clock-cells = <0>;
+						reg = <10>;
+					};
+
+					twi2_clk: twi2_clk {
+						#clock-cells = <0>;
+						reg = <11>;
+					};
+
+					mci0_clk: mci0_clk {
+						#clock-cells = <0>;
+						reg = <12>;
+					};
+
+					spi0_clk: spi0_clk {
+						#clock-cells = <0>;
+						reg = <13>;
+					};
+
+					spi1_clk: spi1_clk {
+						#clock-cells = <0>;
+						reg = <14>;
+					};
+
+					uart0_clk: uart0_clk {
+						#clock-cells = <0>;
+						reg = <15>;
+					};
+
+					uart1_clk: uart1_clk {
+						#clock-cells = <0>;
+						reg = <16>;
+					};
+
+					tcb0_clk: tcb0_clk {
+						#clock-cells = <0>;
+						reg = <17>;
+					};
+
+					pwm_clk: pwm_clk {
+						#clock-cells = <0>;
+						reg = <18>;
+					};
+
+					adc_clk: adc_clk {
+						#clock-cells = <0>;
+						reg = <19>;
+					};
+
+					dma0_clk: dma0_clk {
+						#clock-cells = <0>;
+						reg = <20>;
+					};
+
+					dma1_clk: dma1_clk {
+						#clock-cells = <0>;
+						reg = <21>;
+					};
+
+					uhphs_clk: uhphs_clk {
+						#clock-cells = <0>;
+						reg = <22>;
+					};
+
+					udphs_clk: udphs_clk {
+						#clock-cells = <0>;
+						reg = <23>;
+					};
+
+					mci1_clk: mci1_clk {
+						#clock-cells = <0>;
+						reg = <26>;
+					};
+
+					ssc0_clk: ssc0_clk {
+						#clock-cells = <0>;
+						reg = <28>;
+					};
+				};
 			};
 
 			rstc@fffffe00 {
@@ -95,18 +378,47 @@
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffe30 0xf>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&mck>;
+			};
+
+			sckc@fffffe50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffe50 0x4>;
+
+				slow_osc: slow_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-osc";
+					#clock-cells = <0>;
+					clocks = <&slow_xtal>;
+				};
+
+				slow_rc_osc: slow_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+					#clock-cells = <0>;
+					clock-frequency = <32768>;
+					clock-accuracy = <50000000>;
+				};
+
+				clk32k: slck {
+					compatible = "atmel,at91sam9x5-clk-slow";
+					#clock-cells = <0>;
+					clocks = <&slow_rc_osc>, <&slow_osc>;
+				};
 			};
 
 			tcb0: timer@f8008000 {
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf8008000 0x100>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb0_clk>;
+				clock-names = "t0_clk";
 			};
 
 			tcb1: timer@f800c000 {
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf800c000 0x100>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb0_clk>;
+				clock-names = "t0_clk";
 			};
 
 			dma0: dma-controller@ffffec00 {
@@ -114,6 +426,8 @@
 				reg = <0xffffec00 0x200>;
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
 				#dma-cells = <2>;
+				clocks = <&dma0_clk>;
+				clock-names = "dma_clk";
 			};
 
 			dma1: dma-controller@ffffee00 {
@@ -121,6 +435,8 @@
 				reg = <0xffffee00 0x200>;
 				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
 				#dma-cells = <2>;
+				clocks = <&dma1_clk>;
+				clock-names = "dma_clk";
 			};
 
 			pinctrl@fffff400 {
@@ -453,6 +769,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
+					clocks = <&pioAB_clk>;
 				};
 
 				pioB: gpio@fffff600 {
@@ -464,6 +781,7 @@
 					#gpio-lines = <19>;
 					interrupt-controller;
 					#interrupt-cells = <2>;
+					clocks = <&pioAB_clk>;
 				};
 
 				pioC: gpio@fffff800 {
@@ -474,6 +792,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
+					clocks = <&pioCD_clk>;
 				};
 
 				pioD: gpio@fffffa00 {
@@ -485,6 +804,7 @@
 					#gpio-lines = <22>;
 					interrupt-controller;
 					#interrupt-cells = <2>;
+					clocks = <&pioCD_clk>;
 				};
 			};
 
@@ -497,6 +817,8 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&ssc0_clk>;
+				clock-names = "pclk";
 				status = "disabled";
 			};
 
@@ -507,6 +829,8 @@
 				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
 				pinctrl-names = "default";
+				clocks = <&mci0_clk>;
+				clock-names = "mci_clk";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -519,6 +843,8 @@
 				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
 				pinctrl-names = "default";
+				clocks = <&mci1_clk>;
+				clock-names = "mci_clk";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -530,6 +856,8 @@
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&mck>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
@@ -539,6 +867,8 @@
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&usart0_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
@@ -548,6 +878,8 @@
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&usart1_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
@@ -557,6 +889,8 @@
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&usart2_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
@@ -571,6 +905,7 @@
 				#size-cells = <0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_i2c0>;
+				clocks = <&twi0_clk>;
 				status = "disabled";
 			};
 
@@ -585,6 +920,7 @@
 				#size-cells = <0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_i2c1>;
+				clocks = <&twi1_clk>;
 				status = "disabled";
 			};
 
@@ -599,6 +935,7 @@
 				#size-cells = <0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_i2c2>;
+				clocks = <&twi2_clk>;
 				status = "disabled";
 			};
 
@@ -608,6 +945,8 @@
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&uart0_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
@@ -617,45 +956,51 @@
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&uart1_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
 			adc0: adc@f804c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
 				compatible = "atmel,at91sam9260-adc";
 				reg = <0xf804c000 0x100>;
 				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
-				atmel,adc-use-external;
+				clocks = <&adc_clk>,
+					 <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-use-external-triggers;
 				atmel,adc-channels-used = <0xffff>;
 				atmel,adc-vref = <3300>;
-				atmel,adc-num-channels = <12>;
 				atmel,adc-startup-time = <40>;
-				atmel,adc-channel-base = <0x50>;
-				atmel,adc-drdy-mask = <0x1000000>;
-				atmel,adc-status-register = <0x30>;
-				atmel,adc-trigger-register = <0xc0>;
 				atmel,adc-res = <8 10>;
 				atmel,adc-res-names = "lowres", "highres";
 				atmel,adc-use-res = "highres";
 
 				trigger@0 {
+					reg = <0>;
 					trigger-name = "external-rising";
 					trigger-value = <0x1>;
 					trigger-external;
 				};
 
 				trigger@1 {
+					reg = <1>;
 					trigger-name = "external-falling";
 					trigger-value = <0x2>;
 					trigger-external;
 				};
 
 				trigger@2 {
+					reg = <2>;
 					trigger-name = "external-any";
 					trigger-value = <0x3>;
 					trigger-external;
 				};
 
 				trigger@3 {
+					reg = <3>;
 					trigger-name = "continuous";
 					trigger-value = <0x6>;
 				};
@@ -672,6 +1017,8 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&spi0_clk>;
+				clock-names = "spi_clk";
 				status = "disabled";
 			};
 
@@ -686,6 +1033,8 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&spi1_clk>;
+				clock-names = "spi_clk";
 				status = "disabled";
 			};
 
@@ -696,6 +1045,8 @@
 				reg = <0x00500000 0x80000
 				       0xf803c000 0x400>;
 				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&usb>, <&udphs_clk>;
+				clock-names = "hclk", "pclk";
 				status = "disabled";
 
 				ep0 {
@@ -773,6 +1124,7 @@
 				compatible = "atmel,at91sam9rl-pwm";
 				reg = <0xf8034000 0x300>;
 				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+				clocks = <&pwm_clk>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
@@ -790,6 +1142,7 @@
 			atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
+			atmel,nand-has-dma;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
 			gpios = <&pioD 5 GPIO_ACTIVE_HIGH
@@ -803,6 +1156,8 @@
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00600000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+			clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};
 
@@ -810,6 +1165,8 @@
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
+			clock-names = "usb_clk", "ehci_clk", "uhpck";
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/at91sam9x5_can.dtsi b/arch/arm/boot/dts/at91sam9x5_can.dtsi
new file mode 100644
index 00000000000..f44ab7702a1
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5_can.dtsi
@@ -0,0 +1,31 @@
+/*
+ * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
+ * Ethernet interface.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pmc: pmc@fffffc00 {
+				periphck {
+					can0_clk: can0_clk {
+						#clock-cells = <0>;
+						reg = <29>;
+					};
+
+                                        can1_clk: can1_clk {
+                                                #clock-cells = <0>;
+                                                reg = <30>;
+                                        };
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5_isi.dtsi b/arch/arm/boot/dts/at91sam9x5_isi.dtsi
new file mode 100644
index 00000000000..98bc877a68e
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5_isi.dtsi
@@ -0,0 +1,26 @@
+/*
+ * at91sam9x5_isi.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an
+ * Image Sensor Interface.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pmc: pmc@fffffc00 {
+				periphck {
+					isi_clk: isi_clk {
+						#clock-cells = <0>;
+						reg = <25>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
new file mode 100644
index 00000000000..485302e8233
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
@@ -0,0 +1,26 @@
+/*
+ * at91sam9x5_lcd.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an
+ * LCD controller.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pmc: pmc@fffffc00 {
+				periphck {
+					lcdc_clk: lcdc_clk {
+						#clock-cells = <0>;
+						reg = <25>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
index 55731ffba76..57e89d1d032 100644
--- a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
@@ -43,12 +43,23 @@
 				};
 			};
 
+			pmc: pmc@fffffc00 {
+				periphck {
+					macb0_clk: macb0_clk {
+						#clock-cells = <0>;
+						reg = <24>;
+					};
+				};
+			};
+
 			macb0: ethernet@f802c000 {
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xf802c000 0x100>;
 				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb0_rmii>;
+				clocks = <&macb0_clk>, <&macb0_clk>;
+				clock-names = "hclk", "pclk";
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
index 77425a627a9..663676c0286 100644
--- a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
@@ -31,12 +31,23 @@
 				};
 			};
 
+			pmc: pmc@fffffc00 {
+				periphck {
+					macb1_clk: macb1_clk {
+						#clock-cells = <0>;
+						reg = <27>;
+					};
+				};
+			};
+
 			macb1: ethernet@f8030000 {
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xf8030000 0x100>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb1_rmii>;
+				clocks = <&macb1_clk>, <&macb1_clk>;
+				clock-names = "hclk", "pclk";
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
index 6801106fa1f..140217a5438 100644
--- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
@@ -42,12 +42,23 @@
 				};
 			};
 
+			pmc: pmc@fffffc00 {
+				periphck {
+					usart3_clk: usart3_clk {
+						#clock-cells = <0>;
+						reg = <8>;
+					};
+				};
+			};
+
 			usart3: serial@f8028000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8028000 0x200>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&usart3_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi
index 4a5ee5cc115..8413e21192e 100644
--- a/arch/arm/boot/dts/at91sam9x5cm.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi
@@ -23,6 +23,14 @@
 		};
 	};
 
+	slow_xtal {
+		clock-frequency = <32768>;
+	};
+
+	main_xtal {
+		clock-frequency = <12000000>;
+	};
+
 	ahb {
 		apb {
 			pinctrl@fffff400 {
diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi
index f8674bcc448..bb22842a082 100644
--- a/arch/arm/boot/dts/atlas6.dtsi
+++ b/arch/arm/boot/dts/atlas6.dtsi
@@ -39,6 +39,11 @@
 		};
 	};
 
+	arm-pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <29>;
+	};
+
 	axi {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -65,9 +70,10 @@
 				#clock-cells = <1>;
 			};
 
-			reset-controller@88010000 {
+			rstc: reset-controller@88010000 {
 				compatible = "sirf,prima2-rstc";
 				reg = <0x88010000 0x1000>;
+				#reset-cells = <1>;
 			};
 
 			rsc-controller@88020000 {
@@ -166,6 +172,7 @@
 				compatible = "sirf,prima2-dspif";
 				reg = <0xa8000000 0x10000>;
 				interrupts = <9>;
+				resets = <&rstc 1>;
 			};
 
 			gps@a8010000 {
@@ -173,6 +180,7 @@
 				reg = <0xa8010000 0x10000>;
 				interrupts = <7>;
 				clocks = <&clks 9>;
+				resets = <&rstc 2>;
 			};
 
 			dsp@a9000000 {
@@ -180,6 +188,7 @@
 				reg = <0xa9000000 0x1000000>;
 				interrupts = <8>;
 				clocks = <&clks 8>;
+				resets = <&rstc 0>;
 			};
 		};
 
@@ -194,6 +203,7 @@
 				compatible = "sirf,prima2-tick";
 				reg = <0xb0020000 0x1000>;
 				interrupts = <0>;
+				clocks = <&clks 11>;
 			};
 
 			nand@b0030000 {
@@ -217,8 +227,8 @@
 				interrupts = <17>;
 				fifosize = <128>;
 				clocks = <&clks 13>;
-				sirf,uart-dma-rx-channel = <21>;
-				sirf,uart-dma-tx-channel = <2>;
+				dmas = <&dmac1 5>, <&dmac0 2>;
+				dma-names = "rx", "tx";
 			};
 
 			uart1: uart@b0060000 {
@@ -228,6 +238,7 @@
 				interrupts = <18>;
 				fifosize = <32>;
 				clocks = <&clks 14>;
+				dma-names = "no-rx", "no-tx";
 			};
 
 			uart2: uart@b0070000 {
@@ -237,8 +248,8 @@
 				interrupts = <19>;
 				fifosize = <128>;
 				clocks = <&clks 15>;
-				sirf,uart-dma-rx-channel = <6>;
-				sirf,uart-dma-tx-channel = <7>;
+				dmas = <&dmac0 6>, <&dmac0 7>;
+				dma-names = "rx", "tx";
 			};
 
 			usp0: usp@b0080000 {
@@ -248,8 +259,8 @@
 				interrupts = <20>;
 				fifosize = <128>;
 				clocks = <&clks 28>;
-				sirf,usp-dma-rx-channel = <17>;
-				sirf,usp-dma-tx-channel = <18>;
+				dmas = <&dmac1 1>, <&dmac1 2>;
+				dma-names = "rx", "tx";
 			};
 
 			usp1: usp@b0090000 {
@@ -259,8 +270,8 @@
 				interrupts = <21>;
 				fifosize = <128>;
 				clocks = <&clks 29>;
-				sirf,usp-dma-rx-channel = <14>;
-				sirf,usp-dma-tx-channel = <15>;
+				dmas = <&dmac0 14>, <&dmac0 15>;
+				dma-names = "rx", "tx";
 			};
 
 			dmac0: dma-controller@b00b0000 {
@@ -269,6 +280,7 @@
 				reg = <0xb00b0000 0x10000>;
 				interrupts = <12>;
 				clocks = <&clks 24>;
+				#dma-cells = <1>;
 			};
 
 			dmac1: dma-controller@b0160000 {
@@ -277,6 +289,7 @@
 				reg = <0xb0160000 0x10000>;
 				interrupts = <13>;
 				clocks = <&clks 25>;
+				#dma-cells = <1>;
 			};
 
 			vip@b00C0000 {
@@ -293,9 +306,9 @@
 				reg = <0xb00d0000 0x10000>;
 				interrupts = <15>;
 				sirf,spi-num-chipselects = <1>;
-				cs-gpios = <&gpio 0 0>;
-				sirf,spi-dma-rx-channel = <25>;
-				sirf,spi-dma-tx-channel = <20>;
+				dmas = <&dmac1 9>,
+				     <&dmac1 4>;
+				dma-names = "rx", "tx";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&clks 19>;
@@ -308,8 +321,9 @@
 				reg = <0xb0170000 0x10000>;
 				interrupts = <16>;
 				sirf,spi-num-chipselects = <1>;
-				sirf,spi-dma-rx-channel = <12>;
-				sirf,spi-dma-tx-channel = <13>;
+				dmas = <&dmac0 12>,
+				     <&dmac0 13>;
+				dma-names = "rx", "tx";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&clks 20>;
@@ -550,6 +564,18 @@
                                                 sirf,function = "usp0_uart_nostreamctrl";
                                         };
                                 };
+				usp0_only_utfs_pins_a: usp0@2 {
+					usp0 {
+						sirf,pins = "usp0_only_utfs_grp";
+						sirf,function = "usp0_only_utfs";
+					};
+				};
+				usp0_only_urfs_pins_a: usp0@3 {
+					usp0 {
+						sirf,pins = "usp0_only_urfs_grp";
+						sirf,function = "usp0_only_urfs";
+					};
+				};
                                 usp1_pins_a: usp1@0 {
                                         usp1 {
                                                 sirf,pins = "usp1grp";
diff --git a/arch/arm/boot/dts/axm5516-amarillo.dts b/arch/arm/boot/dts/axm5516-amarillo.dts
new file mode 100644
index 00000000000..a9d60471d9f
--- /dev/null
+++ b/arch/arm/boot/dts/axm5516-amarillo.dts
@@ -0,0 +1,51 @@
+/*
+ * arch/arm/boot/dts/axm5516-amarillo.dts
+ *
+ * Copyright (C) 2013 LSI
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x00000000 0x00400000;
+
+#include "axm55xx.dtsi"
+#include "axm5516-cpus.dtsi"
+
+/ {
+	model = "Amarillo AXM5516";
+	compatible = "lsi,axm5516-amarillo", "lsi,axm5516";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0x02 0x00000000>;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&serial3 {
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/axm5516-cpus.dtsi b/arch/arm/boot/dts/axm5516-cpus.dtsi
new file mode 100644
index 00000000000..b85f360cb12
--- /dev/null
+++ b/arch/arm/boot/dts/axm5516-cpus.dtsi
@@ -0,0 +1,204 @@
+/*
+ * arch/arm/boot/dts/axm5516-cpus.dtsi
+ *
+ * Copyright (C) 2013 LSI
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+				core1 {
+					cpu = <&CPU5>;
+				};
+				core2 {
+					cpu = <&CPU6>;
+				};
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+			cluster2 {
+				core0 {
+					cpu = <&CPU8>;
+				};
+				core1 {
+					cpu = <&CPU9>;
+				};
+				core2 {
+					cpu = <&CPU10>;
+				};
+				core3 {
+					cpu = <&CPU11>;
+				};
+			};
+			cluster3 {
+				core0 {
+					cpu = <&CPU12>;
+				};
+				core1 {
+					cpu = <&CPU13>;
+				};
+				core2 {
+					cpu = <&CPU14>;
+				};
+				core3 {
+					cpu = <&CPU15>;
+				};
+			};
+		};
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x00>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x01>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x02>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x03>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x100>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x101>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x102>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x103>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU8: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x200>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU9: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x201>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU10: cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x202>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU11: cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x203>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU12: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x300>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU13: cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x301>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU14: cpu@302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x302>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU15: cpu@303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x303>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/axm55xx.dtsi b/arch/arm/boot/dts/axm55xx.dtsi
new file mode 100644
index 00000000000..ea288f0a1d3
--- /dev/null
+++ b/arch/arm/boot/dts/axm55xx.dtsi
@@ -0,0 +1,204 @@
+/*
+ * arch/arm/boot/dts/axm55xx.dtsi
+ *
+ * Copyright (C) 2013 LSI
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/lsi,axm5516-clks.h>
+
+#include "skeleton64.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0	  = &serial0;
+		serial1   = &serial1;
+		serial2	  = &serial2;
+		serial3	  = &serial3;
+		timer	  = &timer0;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		clk_ref0: clk_ref0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+
+		clk_ref1: clk_ref1 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+
+		clk_ref2: clk_ref2 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+
+		clks: clock-controller@2010020000 {
+			compatible = "lsi,axm5516-clks";
+			#clock-cells = <1>;
+			reg = <0x20 0x10020000 0 0x20000>;
+		};
+	};
+
+	gic: interrupt-controller@2001001000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x20 0x01001000 0 0x1000>,
+		      <0x20 0x01002000 0 0x1000>,
+		      <0x20 0x01004000 0 0x2000>,
+		      <0x20 0x01006000 0 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+				IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts =
+			<GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		device_type = "soc";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		interrupt-parent = <&gic>;
+		ranges;
+
+		syscon: syscon@2010030000 {
+			compatible = "lsi,axxia-syscon", "syscon";
+			reg = <0x20 0x10030000 0 0x2000>;
+		};
+
+		reset: reset@2010031000 {
+			compatible = "lsi,axm55xx-reset";
+			syscon = <&syscon>;
+		};
+
+		amba {
+			compatible = "arm,amba-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			serial0: uart@2010080000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x20 0x10080000 0 0x1000>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			serial1: uart@2010081000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x20 0x10081000 0 0x1000>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			serial2: uart@2010082000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x20 0x10082000 0 0x1000>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			serial3: uart@2010083000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x20 0x10083000 0 0x1000>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			timer0: timer@2010091000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x20 0x10091000 0 0x1000>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "okay";
+			};
+
+			gpio0: gpio@2010092000 {
+				#gpio-cells = <2>;
+				compatible = "arm,pl061", "arm,primecell";
+				gpio-controller;
+				reg = <0x20 0x10092000 0x00 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			gpio1: gpio@2010093000 {
+				#gpio-cells = <2>;
+				compatible = "arm,pl061", "arm,primecell";
+				gpio-controller;
+				reg = <0x20 0x10093000 0x00 0x1000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+		};
+	};
+};
+
+/*
+  Local Variables:
+  mode: C
+  End:
+*/
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index e491b82f8d6..6b05ae6d476 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -14,6 +14,8 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
+#include "dt-bindings/clock/bcm281xx.h"
+
 #include "skeleton.dtsi"
 
 / {
@@ -43,7 +45,7 @@
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
 		reg = <0x3e000000 0x1000>;
-		clocks = <&uartb_clk>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB>;
 		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
@@ -53,7 +55,7 @@
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
 		reg = <0x3e001000 0x1000>;
-		clocks = <&uartb2_clk>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB2>;
 		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
@@ -63,7 +65,7 @@
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
 		reg = <0x3e002000 0x1000>;
-		clocks = <&uartb3_clk>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
@@ -73,7 +75,7 @@
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
 		reg = <0x3e003000 0x1000>;
-		clocks = <&uartb4_clk>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB4>;
 		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
@@ -95,7 +97,7 @@
 		compatible = "brcm,kona-timer";
 		reg = <0x35006000 0x1000>;
 		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&hub_timer_clk>;
+		clocks = <&aon_ccu BCM281XX_AON_CCU_HUB_TIMER>;
 	};
 
 	gpio: gpio@35003000 {
@@ -118,7 +120,7 @@
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f180000 0x10000>;
 		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&sdio1_clk>;
+		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO1>;
 		status = "disabled";
 	};
 
@@ -126,7 +128,7 @@
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f190000 0x10000>;
 		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&sdio2_clk>;
+		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO2>;
 		status = "disabled";
 	};
 
@@ -134,7 +136,7 @@
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f1a0000 0x10000>;
 		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&sdio3_clk>;
+		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO3>;
 		status = "disabled";
 	};
 
@@ -142,12 +144,12 @@
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f1b0000 0x10000>;
 		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&sdio4_clk>;
+		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO4>;
 		status = "disabled";
 	};
 
 	pinctrl@35004800 {
-		compatible = "brcm,capri-pinctrl";
+		compatible = "brcm,bcm11351-pinctrl";
 		reg = <0x35004800 0x430>;
 	};
 
@@ -157,7 +159,7 @@
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&bsc1_clk>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC1>;
 		status = "disabled";
 	};
 
@@ -167,7 +169,7 @@
 		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&bsc2_clk>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC2>;
 		status = "disabled";
 	};
 
@@ -177,7 +179,7 @@
 		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&bsc3_clk>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC3>;
 		status = "disabled";
 	};
 
@@ -187,105 +189,199 @@
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&pmu_bsc_clk>;
+		clocks = <&aon_ccu BCM281XX_AON_CCU_PMU_BSC>;
+		status = "disabled";
+	};
+
+	pwm: pwm@3e01a000 {
+		compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm";
+		reg = <0x3e01a000 0xcc>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_PWM>;
+		#pwm-cells = <3>;
 		status = "disabled";
 	};
 
 	clocks {
-		bsc1_clk: bsc1 {
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		root_ccu: root_ccu {
+			compatible = "brcm,bcm11351-root-ccu";
+			reg = <0x35001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "frac_1m";
+		};
+
+		hub_ccu: hub_ccu {
+			compatible = "brcm,bcm11351-hub-ccu";
+			reg = <0x34000000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "tmon_1m";
+		};
+
+		aon_ccu: aon_ccu {
+			compatible = "brcm,bcm11351-aon-ccu";
+			reg = <0x35002000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "hub_timer",
+					     "pmu_bsc",
+					     "pmu_bsc_var";
+		};
+
+		master_ccu: master_ccu {
+			compatible = "brcm,bcm11351-master-ccu";
+			reg = <0x3f001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "sdio1",
+					     "sdio2",
+					     "sdio3",
+					     "sdio4",
+					     "usb_ic",
+					     "hsic2_48m",
+					     "hsic2_12m";
+		};
+
+		slave_ccu: slave_ccu {
+			compatible = "brcm,bcm11351-slave-ccu";
+			reg = <0x3e011000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "uartb",
+					     "uartb2",
+					     "uartb3",
+					     "uartb4",
+					     "ssp0",
+					     "ssp2",
+					     "bsc1",
+					     "bsc2",
+					     "bsc3",
+					     "pwm";
+		};
+
+		ref_1m_clk: ref_1m {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <1000000>;
 		};
 
-		bsc2_clk: bsc2 {
+		ref_32k_clk: ref_32k {
+			#clock-cells = <0>;
 			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
+			clock-frequency = <32768>;
+		};
+
+		bbl_32k_clk: bbl_32k {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
 		};
 
-		bsc3_clk: bsc3 {
+		ref_13m_clk: ref_13m {
+			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <13000000>;
-			#clock-cells = <0>;
 		};
 
-		pmu_bsc_clk: pmu_bsc {
+		var_13m_clk: var_13m {
+			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <13000000>;
-			#clock-cells = <0>;
 		};
 
-		hub_timer_clk: hub_timer {
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
+		dft_19_5m_clk: dft_19_5m {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <19500000>;
 		};
 
-		pwm_clk: pwm {
+		ref_crystal_clk: ref_crystal {
+			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <26000000>;
-			#clock-cells = <0>;
 		};
 
-		sdio1_clk: sdio1 {
-			compatible = "fixed-clock";
-			clock-frequency = <48000000>;
+		ref_cx40_clk: ref_cx40 {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <40000000>;
 		};
 
-		sdio2_clk: sdio2 {
-			compatible = "fixed-clock";
-			clock-frequency = <48000000>;
+		ref_52m_clk: ref_52m {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
 		};
 
-		sdio3_clk: sdio3 {
-			compatible = "fixed-clock";
-			clock-frequency = <48000000>;
+		var_52m_clk: var_52m {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
 		};
 
-		sdio4_clk: sdio4 {
+		usb_otg_ahb_clk: usb_otg_ahb {
 			compatible = "fixed-clock";
-			clock-frequency = <48000000>;
+			clock-frequency = <52000000>;
 			#clock-cells = <0>;
 		};
 
-		tmon_1m_clk: tmon_1m {
-			compatible = "fixed-clock";
-			clock-frequency = <1000000>;
+		ref_96m_clk: ref_96m {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
 		};
 
-		uartb_clk: uartb {
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
+		var_96m_clk: var_96m {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
 		};
 
-		uartb2_clk: uartb2 {
+		ref_104m_clk: ref_104m {
+			#clock-cells = <0>;
 			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
+			clock-frequency = <104000000>;
+		};
+
+		var_104m_clk: var_104m {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
 		};
 
-		uartb3_clk: uartb3 {
+		ref_156m_clk: ref_156m {
+			#clock-cells = <0>;
 			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
+			clock-frequency = <156000000>;
+		};
+
+		var_156m_clk: var_156m {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
 		};
 
-		uartb4_clk: uartb4 {
+		ref_208m_clk: ref_208m {
+			#clock-cells = <0>;
 			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
+			clock-frequency = <208000000>;
+		};
+
+		var_208m_clk: var_208m {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <208000000>;
 		};
 
-		usb_otg_ahb_clk: usb_otg_ahb {
+		ref_312m_clk: ref_312m {
+			#clock-cells = <0>;
 			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
+			clock-frequency = <312000000>;
+		};
+
+		var_312m_clk: var_312m {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <312000000>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/bcm11351-brt.dts b/arch/arm/boot/dts/bcm21664-garnet.dts
index 396b70459cd..e87cb26ddf8 100644
--- a/arch/arm/boot/dts/bcm11351-brt.dts
+++ b/arch/arm/boot/dts/bcm21664-garnet.dts
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2012 Broadcom Corporation
+ * Copyright (C) 2014 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -13,11 +13,13 @@
 
 /dts-v1/;
 
-#include "bcm11351.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+#include "bcm21664.dtsi"
 
 / {
-	model = "BCM11351 BRT board";
-	compatible = "brcm,bcm11351-brt", "brcm,bcm11351";
+	model = "BCM21664 Garnet board";
+	compatible = "brcm,bcm21664-garnet", "brcm,bcm21664";
 
 	memory {
 		reg = <0x80000000 0x40000000>; /* 1 GB */
@@ -40,7 +42,7 @@
 
 	sdio4: sdio@3f1b0000 {
 		max-frequency = <48000000>;
-		cd-gpios = <&gpio 14 0>;
+		cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
 		status = "okay";
 	};
 
diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi
new file mode 100644
index 00000000000..8b366822bb4
--- /dev/null
+++ b/arch/arm/boot/dts/bcm21664.dtsi
@@ -0,0 +1,338 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "dt-bindings/clock/bcm21664.h"
+
+#include "skeleton.dtsi"
+
+/ {
+	model = "BCM21664 SoC";
+	compatible = "brcm,bcm21664";
+	interrupt-parent = <&gic>;
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gic: interrupt-controller@3ff00100 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x3ff01000 0x1000>,
+		      <0x3ff00100 0x100>;
+	};
+
+	smc@0x3404e000 {
+		compatible = "brcm,bcm21664-smc", "brcm,kona-smc";
+		reg = <0x3404e000 0x400>; /* 1 KiB in SRAM */
+	};
+
+	uart@3e000000 {
+		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e000000 0x118>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	uart@3e001000 {
+		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e001000 0x118>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	uart@3e002000 {
+		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e002000 0x118>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	L2: l2-cache {
+		compatible = "arm,pl310-cache";
+		reg = <0x3ff20000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	brcm,resetmgr@35001f00 {
+		compatible = "brcm,bcm21664-resetmgr";
+		reg = <0x35001f00 0x24>;
+	};
+
+	timer@35006000 {
+		compatible = "brcm,kona-timer";
+		reg = <0x35006000 0x1c>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
+	};
+
+	gpio: gpio@35003000 {
+		compatible = "brcm,bcm21664-gpio", "brcm,kona-gpio";
+		reg = <0x35003000 0x524>;
+		interrupts =
+		       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+	};
+
+	sdio1: sdio@3f180000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f180000 0x801c>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
+		status = "disabled";
+	};
+
+	sdio2: sdio@3f190000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f190000 0x801c>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
+		status = "disabled";
+	};
+
+	sdio3: sdio@3f1a0000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f1a0000 0x801c>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
+		status = "disabled";
+	};
+
+	sdio4: sdio@3f1b0000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f1b0000 0x801c>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
+		status = "disabled";
+	};
+
+	i2c@3e016000 {
+		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+		reg = <0x3e016000 0x70>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
+		status = "disabled";
+	};
+
+	i2c@3e017000 {
+		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+		reg = <0x3e017000 0x70>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
+		status = "disabled";
+	};
+
+	i2c@3e018000 {
+		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+		reg = <0x3e018000 0x70>;
+		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
+		status = "disabled";
+	};
+
+	i2c@3e01c000 {
+		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+		reg = <0x3e01c000 0x70>;
+		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
+		status = "disabled";
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * Fixed clocks are defined before CCUs whose
+		 * clocks may depend on them.
+		 */
+
+		ref_32k_clk: ref_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		bbl_32k_clk: bbl_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		ref_13m_clk: ref_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		var_13m_clk: var_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		dft_19_5m_clk: dft_19_5m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <19500000>;
+		};
+
+		ref_crystal_clk: ref_crystal {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <26000000>;
+		};
+
+		ref_52m_clk: ref_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		var_52m_clk: var_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		usb_otg_ahb_clk: usb_otg_ahb {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		ref_96m_clk: ref_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		var_96m_clk: var_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		ref_104m_clk: ref_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		var_104m_clk: var_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		ref_156m_clk: ref_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		var_156m_clk: var_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		root_ccu: root_ccu {
+			compatible = BCM21664_DT_ROOT_CCU_COMPAT;
+			reg = <0x35001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "frac_1m";
+		};
+
+		aon_ccu: aon_ccu {
+			compatible = BCM21664_DT_AON_CCU_COMPAT;
+			reg = <0x35002000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "hub_timer";
+		};
+
+		master_ccu: master_ccu {
+			compatible = BCM21664_DT_MASTER_CCU_COMPAT;
+			reg = <0x3f001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "sdio1",
+					     "sdio2",
+					     "sdio3",
+					     "sdio4",
+					     "sdio1_sleep",
+					     "sdio2_sleep",
+					     "sdio3_sleep",
+					     "sdio4_sleep";
+		};
+
+		slave_ccu: slave_ccu {
+			compatible = BCM21664_DT_SLAVE_CCU_COMPAT;
+			reg = <0x3e011000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "uartb",
+					     "uartb2",
+					     "uartb3",
+					     "bsc1",
+					     "bsc2",
+					     "bsc3",
+					     "bsc4";
+		};
+	};
+
+	usbotg: usb@3f120000 {
+		compatible = "snps,dwc2";
+		reg = <0x3f120000 0x10000>;
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&usb_otg_ahb_clk>;
+		clock-names = "otg";
+		phys = <&usbphy>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	usbphy: usb-phy@3f130000 {
+		compatible = "brcm,kona-usb2-phy";
+		reg = <0x3f130000 0x28>;
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts
index 5ff2382a49e..9ce91dd60cb 100644
--- a/arch/arm/boot/dts/bcm28155-ap.dts
+++ b/arch/arm/boot/dts/bcm28155-ap.dts
@@ -46,27 +46,36 @@
 
 	i2c@3500d000 {
 		status="okay";
-		clock-frequency = <400000>;
-	};
+		clock-frequency = <100000>;
 
-	sdio1: sdio@3f180000 {
-		max-frequency = <48000000>;
-		status = "okay";
+		pmu: pmu@8 {
+			reg = <0x08>;
+		};
 	};
 
 	sdio2: sdio@3f190000 {
 		non-removable;
 		max-frequency = <48000000>;
+		vmmc-supply = <&camldo1_reg>;
+		vqmmc-supply = <&iosr1_reg>;
 		status = "okay";
 	};
 
 	sdio4: sdio@3f1b0000 {
 		max-frequency = <48000000>;
 		cd-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+		vmmc-supply = <&sdldo_reg>;
+		vqmmc-supply = <&sdxldo_reg>;
+		status = "okay";
+	};
+
+	pwm: pwm@3e01a000 {
 		status = "okay";
 	};
 
 	usbotg: usb@3f120000 {
+		vusb_d-supply = <&usbldo_reg>;
+		vusb_a-supply = <&iosr1_reg>;
 		status = "okay";
 	};
 
@@ -74,3 +83,39 @@
 		status = "okay";
 	};
 };
+
+#include "bcm59056.dtsi"
+
+&pmu {
+	compatible = "brcm,bcm59056";
+	interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+	regulators {
+		camldo1_reg: camldo1 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		sdldo_reg: sdldo {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		sdxldo_reg: sdxldo {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		usbldo_reg: usbldo {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		iosr1_reg: iosr1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index b021c96d3ba..b8473c43e88 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -15,39 +15,52 @@
 		#size-cells = <1>;
 		ranges = <0x7e000000 0x20000000 0x02000000>;
 
-		timer {
+		timer@7e003000 {
 			compatible = "brcm,bcm2835-system-timer";
 			reg = <0x7e003000 0x1000>;
 			interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
 			clock-frequency = <1000000>;
 		};
 
-		intc: interrupt-controller {
+		dma: dma@7e007000 {
+			compatible = "brcm,bcm2835-dma";
+			reg = <0x7e007000 0xf00>;
+			interrupts = <1 16>,
+				     <1 17>,
+				     <1 18>,
+				     <1 19>,
+				     <1 20>,
+				     <1 21>,
+				     <1 22>,
+				     <1 23>,
+				     <1 24>,
+				     <1 25>,
+				     <1 26>,
+				     <1 27>,
+				     <1 28>;
+
+			#dma-cells = <1>;
+			brcm,dma-channel-mask = <0x7f35>;
+		};
+
+		intc: interrupt-controller@7e00b200 {
 			compatible = "brcm,bcm2835-armctrl-ic";
 			reg = <0x7e00b200 0x200>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};
 
-		watchdog {
+		watchdog@7e100000 {
 			compatible = "brcm,bcm2835-pm-wdt";
 			reg = <0x7e100000 0x28>;
 		};
 
-		rng {
+		rng@7e104000 {
 			compatible = "brcm,bcm2835-rng";
 			reg = <0x7e104000 0x10>;
 		};
 
-		uart@20201000 {
-			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
-			reg = <0x7e201000 0x1000>;
-			interrupts = <2 25>;
-			clock-frequency = <3000000>;
-			arm,primecell-periphid = <0x00241011>;
-		};
-
-		gpio: gpio {
+		gpio: gpio@7e200000 {
 			compatible = "brcm,bcm2835-gpio";
 			reg = <0x7e200000 0xb4>;
 			/*
@@ -70,7 +83,25 @@
 			#interrupt-cells = <2>;
 		};
 
-		spi: spi@20204000 {
+		uart@7e201000 {
+			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
+			reg = <0x7e201000 0x1000>;
+			interrupts = <2 25>;
+			clock-frequency = <3000000>;
+			arm,primecell-periphid = <0x00241011>;
+		};
+
+		i2s: i2s@7e203000 {
+			compatible = "brcm,bcm2835-i2s";
+			reg = <0x7e203000 0x20>,
+			      <0x7e101098 0x02>;
+
+			dmas = <&dma 2>,
+			       <&dma 3>;
+			dma-names = "tx", "rx";
+		};
+
+		spi: spi@7e204000 {
 			compatible = "brcm,bcm2835-spi";
 			reg = <0x7e204000 0x1000>;
 			interrupts = <2 22>;
@@ -90,7 +121,15 @@
 			status = "disabled";
 		};
 
-		i2c1: i2c@20804000 {
+		sdhci: sdhci@7e300000 {
+			compatible = "brcm,bcm2835-sdhci";
+			reg = <0x7e300000 0x100>;
+			interrupts = <2 30>;
+			clocks = <&clk_mmc>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@7e804000 {
 			compatible = "brcm,bcm2835-i2c";
 			reg = <0x7e804000 0x1000>;
 			interrupts = <2 21>;
@@ -100,19 +139,15 @@
 			status = "disabled";
 		};
 
-		sdhci: sdhci {
-			compatible = "brcm,bcm2835-sdhci";
-			reg = <0x7e300000 0x100>;
-			interrupts = <2 30>;
-			clocks = <&clk_mmc>;
-			status = "disabled";
-		};
-
-		usb {
+		usb@7e980000 {
 			compatible = "brcm,bcm2835-usb";
 			reg = <0x7e980000 0x10000>;
 			interrupts = <1 9>;
 		};
+
+		arm-pmu {
+			compatible = "arm,arm1176-pmu";
+		};
 	};
 
 	clocks {
@@ -120,24 +155,27 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		clk_mmc: mmc {
+		clk_mmc: clock@0 {
 			compatible = "fixed-clock";
 			reg = <0>;
 			#clock-cells = <0>;
+			clock-output-names = "mmc";
 			clock-frequency = <100000000>;
 		};
 
-		clk_i2c: i2c {
+		clk_i2c: clock@1 {
 			compatible = "fixed-clock";
 			reg = <1>;
 			#clock-cells = <0>;
+			clock-output-names = "i2c";
 			clock-frequency = <250000000>;
 		};
 
-		clk_spi: spi {
+		clk_spi: clock@2 {
 			compatible = "fixed-clock";
 			reg = <2>;
 			#clock-cells = <0>;
+			clock-output-names = "spi";
 			clock-frequency = <250000000>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
new file mode 100644
index 00000000000..3b5259de5a3
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -0,0 +1,35 @@
+/*
+ * Broadcom BCM470X / BCM5301X arm platform code.
+ * DTS for Netgear R6250 V1
+ *
+ * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	compatible = "netgear,r6250v1", "brcm,bcm4708";
+	model = "Netgear R6250 V1 (BCM4708)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	chipcommonA {
+		uart0: serial@0300 {
+			status = "okay";
+		};
+
+		uart1: serial@0400 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/bcm4708.dtsi
new file mode 100644
index 00000000000..31141e83fed
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708.dtsi
@@ -0,0 +1,34 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for BCM4708 SoC.
+ *
+ * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcm5301x.dtsi"
+
+/ {
+	compatible = "brcm,bcm4708";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x1>;
+		};
+	};
+
+};
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
new file mode 100644
index 00000000000..53c624f766b
--- /dev/null
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -0,0 +1,95 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015,
+ * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs
+ *
+ * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	chipcommonA {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x18000000 0x00001000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uart0: serial@0300 {
+			compatible = "ns16550";
+			reg = <0x0300 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
+
+		uart1: serial@0400 {
+			compatible = "ns16550";
+			reg = <0x0400 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
+	};
+
+	mpcore {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x19020000 0x00003000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		scu@0000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0x0000 0x100>;
+		};
+
+		timer@0200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x0200 0x100>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_periph>;
+		};
+
+		local-timer@0600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x0600 0x100>;
+			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_periph>;
+		};
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+			      <0x0100 0x100>;
+		};
+
+		L2: cache-controller@2000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x2000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* As long as we do not have a real clock driver us this
+		 * fixed clock */
+		clk_periph: periph {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm59056.dtsi b/arch/arm/boot/dts/bcm59056.dtsi
new file mode 100644
index 00000000000..066adfb10bd
--- /dev/null
+++ b/arch/arm/boot/dts/bcm59056.dtsi
@@ -0,0 +1,95 @@
+/*
+* Copyright 2014 Linaro Limited
+* Author: Matt Porter <mporter@linaro.org>
+*
+* This program is free software; you can redistribute it and/or modify it
+* under  the terms of the GNU General  Public License as published by the
+* Free Software Foundation;  either version 2 of the License, or (at your
+* option) any later version.
+*/
+
+&pmu {
+	compatible = "brcm,bcm59056";
+	regulators {
+		rfldo_reg: rfldo {
+		};
+
+		camldo1_reg: camldo1 {
+		};
+
+		camldo2_reg: camldo2 {
+		};
+
+		simldo1_reg: simldo1 {
+		};
+
+		simldo2_reg: simldo2 {
+		};
+
+		sdldo_reg: sdldo {
+		};
+
+		sdxldo_reg: sdxldo {
+		};
+
+		mmcldo1_reg: mmcldo1 {
+		};
+
+		mmcldo2_reg: mmcldo2 {
+		};
+
+		audldo_reg: audldo {
+		};
+
+		micldo_reg: micldo {
+		};
+
+		usbldo_reg: usbldo {
+		};
+
+		vibldo_reg: vibldo {
+		};
+
+		csr_reg: csr {
+		};
+
+		iosr1_reg: iosr1 {
+		};
+
+		iosr2_reg: iosr2 {
+		};
+
+		msr_reg: msr {
+		};
+
+		sdsr1_reg: sdsr1 {
+		};
+
+		sdsr2_reg: sdsr2 {
+		};
+
+		vsr_reg: vsr {
+		};
+
+		gpldo1_reg: gpldo1 {
+		};
+
+		gpldo2_reg: gpldo2 {
+		};
+
+		gpldo3_reg: gpldo3 {
+		};
+
+		gpldo4_reg: gpldo4 {
+		};
+
+		gpldo5_reg: gpldo5 {
+		};
+
+		gpldo6_reg: gpldo6 {
+		};
+
+		vbus_reg: vbus {
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index 56a1af2f105..2477dac4d64 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -12,6 +12,7 @@
  */
 
 #include "skeleton.dtsi"
+#include <dt-bindings/clock/berlin2.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
@@ -37,24 +38,10 @@
 		};
 	};
 
-	clocks {
-		smclk: sysmgr-clock {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-
-		cfgclk: cfg-clock {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <100000000>;
-		};
-
-		sysclk: system-clock {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <400000000>;
-		};
+	refclk: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
 	};
 
 	soc {
@@ -72,6 +59,11 @@
 			cache-level = <2>;
 		};
 
+		scu: snoop-control-unit@ad0000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xad0000 0x58>;
+		};
+
 		gic: interrupt-controller@ad1000 {
 			compatible = "arm,cortex-a9-gic";
 			reg = <0xad1000 0x1000>, <0xad0100 0x0100>;
@@ -83,7 +75,7 @@
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xad0600 0x20>;
 			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&sysclk>;
+			clocks = <&chip CLKID_TWD>;
 		};
 
 		apb@e80000 {
@@ -94,11 +86,83 @@
 			ranges = <0 0xe80000 0x10000>;
 			interrupt-parent = <&aic>;
 
+			gpio0: gpio@0400 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porta: gpio-port@0 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <0>;
+				};
+			};
+
+			gpio1: gpio@0800 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0800 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portb: gpio-port@1 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <1>;
+				};
+			};
+
+			gpio2: gpio@0c00 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0c00 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portc: gpio-port@2 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <2>;
+				};
+			};
+
+			gpio3: gpio@1000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x1000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portd: gpio-port@3 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <3>;
+				};
+			};
+
 			timer0: timer@2c00 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c00 0x14>;
 				interrupts = <8>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "okay";
 			};
@@ -107,7 +171,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c14 0x14>;
 				interrupts = <9>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "okay";
 			};
@@ -116,7 +180,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c28 0x14>;
 				interrupts = <10>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -125,7 +189,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c3c 0x14>;
 				interrupts = <11>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -134,7 +198,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c50 0x14>;
 				interrupts = <12>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -143,7 +207,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c64 0x14>;
 				interrupts = <13>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -152,7 +216,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c78 0x14>;
 				interrupts = <14>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -161,7 +225,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c8c 0x14>;
 				interrupts = <15>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -176,6 +240,14 @@
 			};
 		};
 
+		chip: chip-control@ea0000 {
+			compatible = "marvell,berlin2-chip-ctrl";
+			#clock-cells = <1>;
+			reg = <0xea0000 0x400>;
+			clocks = <&refclk>;
+			clock-names = "refclk";
+		};
+
 		apb@fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
@@ -184,13 +256,48 @@
 			ranges = <0 0xfc0000 0x10000>;
 			interrupt-parent = <&sic>;
 
+			sm_gpio1: gpio@5000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x5000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portf: gpio-port@5 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+				};
+			};
+
+			sm_gpio0: gpio@c000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0xc000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porte: gpio-port@4 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <11>;
+				};
+			};
+
 			uart0: serial@9000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x9000 0x100>;
 				reg-shift = <2>;
 				reg-io-width = <1>;
 				interrupts = <8>;
-				clocks = <&smclk>;
+				clocks = <&refclk>;
+				pinctrl-0 = <&uart0_pmux>;
+				pinctrl-names = "default";
 				status = "disabled";
 			};
 
@@ -200,7 +307,9 @@
 				reg-shift = <2>;
 				reg-io-width = <1>;
 				interrupts = <9>;
-				clocks = <&smclk>;
+				clocks = <&refclk>;
+				pinctrl-0 = <&uart1_pmux>;
+				pinctrl-names = "default";
 				status = "disabled";
 			};
 
@@ -210,10 +319,32 @@
 				reg-shift = <2>;
 				reg-io-width = <1>;
 				interrupts = <10>;
-				clocks = <&smclk>;
+				clocks = <&refclk>;
+				pinctrl-0 = <&uart2_pmux>;
+				pinctrl-names = "default";
 				status = "disabled";
 			};
 
+			sysctrl: system-controller@d000 {
+				compatible = "marvell,berlin2-system-ctrl";
+				reg = <0xd000 0x100>;
+
+				uart0_pmux: uart0-pmux {
+					groups = "GSM4";
+					function = "uart0";
+				};
+
+				uart1_pmux: uart1-pmux {
+					groups = "GSM5";
+					function = "uart1";
+				};
+
+				uart2_pmux: uart2-pmux {
+					groups = "GSM3";
+					function = "uart2";
+				};
+			};
+
 			sic: interrupt-controller@e000 {
 				compatible = "snps,dw-apb-ictl";
 				reg = <0xe000 0x400>;
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
index 094968c2753..cc1df65da50 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -12,6 +12,7 @@
  */
 
 #include "skeleton.dtsi"
+#include <dt-bindings/clock/berlin2.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
@@ -30,24 +31,10 @@
 		};
 	};
 
-	clocks {
-		smclk: sysmgr-clock {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-
-		cfgclk: cfg-clock {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <75000000>;
-		};
-
-		sysclk: system-clock {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <300000000>;
-		};
+	refclk: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
 	};
 
 	soc {
@@ -76,7 +63,7 @@
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xad0600 0x20>;
 			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&sysclk>;
+			clocks = <&chip CLKID_TWD>;
 		};
 
 		apb@e80000 {
@@ -87,11 +74,83 @@
 			ranges = <0 0xe80000 0x10000>;
 			interrupt-parent = <&aic>;
 
+			gpio0: gpio@0400 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porta: gpio-port@0 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <0>;
+				};
+			};
+
+			gpio1: gpio@0800 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0800 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portb: gpio-port@1 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <1>;
+				};
+			};
+
+			gpio2: gpio@0c00 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0c00 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portc: gpio-port@2 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <2>;
+				};
+			};
+
+			gpio3: gpio@1000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x1000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portd: gpio-port@3 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <3>;
+				};
+			};
+
 			timer0: timer@2c00 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c00 0x14>;
 				interrupts = <8>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "okay";
 			};
@@ -100,7 +159,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c14 0x14>;
 				interrupts = <9>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "okay";
 			};
@@ -109,7 +168,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c28 0x14>;
 				interrupts = <10>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -118,7 +177,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c3c 0x14>;
 				interrupts = <11>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -127,7 +186,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c50 0x14>;
 				interrupts = <12>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -136,7 +195,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c64 0x14>;
 				interrupts = <13>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -145,7 +204,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c78 0x14>;
 				interrupts = <14>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -154,7 +213,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c8c 0x14>;
 				interrupts = <15>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -169,6 +228,19 @@
 			};
 		};
 
+		chip: chip-control@ea0000 {
+			compatible = "marvell,berlin2cd-chip-ctrl";
+			#clock-cells = <1>;
+			reg = <0xea0000 0x400>;
+			clocks = <&refclk>;
+			clock-names = "refclk";
+
+			uart0_pmux: uart0-pmux {
+				groups = "G6";
+				function = "uart0";
+			};
+		};
+
 		apb@fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
@@ -177,13 +249,45 @@
 			ranges = <0 0xfc0000 0x10000>;
 			interrupt-parent = <&sic>;
 
+			sm_gpio1: gpio@5000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x5000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portf: gpio-port@5 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+				};
+			};
+
+			sm_gpio0: gpio@c000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0xc000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porte: gpio-port@4 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+				};
+			};
+
 			uart0: serial@9000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x9000 0x100>;
 				reg-shift = <2>;
 				reg-io-width = <1>;
 				interrupts = <8>;
-				clocks = <&smclk>;
+				clocks = <&refclk>;
+				pinctrl-0 = <&uart0_pmux>;
+				pinctrl-names = "default";
 				status = "disabled";
 			};
 
@@ -193,10 +297,15 @@
 				reg-shift = <2>;
 				reg-io-width = <1>;
 				interrupts = <9>;
-				clocks = <&smclk>;
+				clocks = <&refclk>;
 				status = "disabled";
 			};
 
+			sysctrl: system-controller@d000 {
+				compatible = "marvell,berlin2cd-system-ctrl";
+				reg = <0xd000 0x100>;
+			};
+
 			sic: interrupt-controller@e000 {
 				compatible = "snps,dw-apb-ictl";
 				reg = <0xe000 0x400>;
diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
new file mode 100644
index 00000000000..995150f9379
--- /dev/null
+++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "berlin2q.dtsi"
+
+/ {
+	model = "Marvell BG2-Q DMP";
+	compatible = "marvell,berlin2q-dmp", "marvell,berlin2q", "marvell,berlin";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>;
+	};
+
+	choosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+};
+
+&sdhci1 {
+	broken-cd;
+	sdhci,wp-inverted;
+	status = "okay";
+};
+
+&sdhci2 {
+	non-removable;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
new file mode 100644
index 00000000000..635a16a64cb
--- /dev/null
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -0,0 +1,363 @@
+/*
+ * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <dt-bindings/clock/berlin2q.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	model = "Marvell Armada 1500 pro (BG2-Q) SoC";
+	compatible = "marvell,berlin2q", "marvell,berlin";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <3>;
+		};
+	};
+
+	refclk: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0 0xf7000000 0x1000000>;
+		interrupt-parent = <&gic>;
+
+		sdhci0: sdhci@ab0000 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab0000 0x200>;
+			clocks = <&chip CLKID_SDIO1XIN>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci@ab0800 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab0800 0x200>;
+			clocks = <&chip CLKID_SDIO1XIN>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sdhci2: sdhci@ab1000 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab1000 0x200>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip CLKID_SDIO1XIN>;
+			status = "disabled";
+		};
+
+		l2: l2-cache-controller@ac0000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xac0000 0x1000>;
+			cache-level = <2>;
+		};
+
+		scu: snoop-control-unit@ad0000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xad0000 0x58>;
+		};
+
+		local-timer@ad0600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xad0600 0x20>;
+			clocks = <&chip CLKID_TWD>;
+			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gic: interrupt-controller@ad1000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0xad1000 0x1000>, <0xad0100 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		apb@e80000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0xe80000 0x10000>;
+			interrupt-parent = <&aic>;
+
+			gpio0: gpio@0400 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porta: gpio-port@0 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <0>;
+				};
+			};
+
+			gpio1: gpio@0800 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0800 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portb: gpio-port@1 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <1>;
+				};
+			};
+
+			gpio2: gpio@0c00 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0c00 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portc: gpio-port@2 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <2>;
+				};
+			};
+
+			gpio3: gpio@1000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x1000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portd: gpio-port@3 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <3>;
+				};
+			};
+
+			timer0: timer@2c00 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c00 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				interrupts = <8>;
+			};
+
+			timer1: timer@2c14 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c14 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer2: timer@2c28 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c28 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer3: timer@2c3c {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c3c 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer4: timer@2c50 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c50 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer5: timer@2c64 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c64 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer6: timer@2c78 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c78 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer7: timer@2c8c {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c8c 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			aic: interrupt-controller@3800 {
+				compatible = "snps,dw-apb-ictl";
+				reg = <0x3800 0x30>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			gpio4: gpio@5000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x5000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porte: gpio-port@4 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+				};
+			};
+
+			gpio5: gpio@c000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0xc000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portf: gpio-port@5 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+				};
+			};
+		};
+
+		chip: chip-control@ea0000 {
+			compatible = "marvell,berlin2q-chip-ctrl";
+			#clock-cells = <1>;
+			reg = <0xea0000 0x400>, <0xdd0170 0x10>;
+			clocks = <&refclk>;
+			clock-names = "refclk";
+		};
+
+		apb@fc0000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0xfc0000 0x10000>;
+			interrupt-parent = <&sic>;
+
+			uart0: uart@9000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x9000 0x100>;
+				interrupt-parent = <&sic>;
+				interrupts = <8>;
+				clocks = <&refclk>;
+				reg-shift = <2>;
+				pinctrl-0 = <&uart0_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			uart1: uart@a000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0xa000 0x100>;
+				interrupt-parent = <&sic>;
+				interrupts = <9>;
+				clocks = <&refclk>;
+				reg-shift = <2>;
+				pinctrl-0 = <&uart1_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			sysctrl: pin-controller@d000 {
+				compatible = "marvell,berlin2q-system-ctrl";
+				reg = <0xd000 0x100>;
+
+				uart0_pmux: uart0-pmux {
+					groups = "GSM12";
+					function = "uart0";
+				};
+
+				uart1_pmux: uart1-pmux {
+					groups = "GSM14";
+					function = "uart1";
+				};
+			};
+
+			sic: interrupt-controller@e000 {
+				compatible = "snps,dw-apb-ictl";
+				reg = <0xe000 0x30>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 2b76524f4aa..3b891dd2099 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -186,6 +186,11 @@
 				reg = <0x20000 0x80>, <0x800100 0x8>;
 			};
 
+			sysc: system-ctrl@20000 {
+				compatible = "marvell,orion-system-controller";
+				reg = <0x20000 0x110>;
+			};
+
 			bridge_intc: bridge-interrupt-ctrl@20110 {
 				compatible = "marvell,orion-bridge-intc";
 				interrupt-controller;
@@ -210,6 +215,14 @@
 				clocks = <&core_clk 0>;
 			};
 
+			watchdog@20300 {
+				compatible = "marvell,orion-wdt";
+				reg = <0x20300 0x28>, <0x20108 0x4>;
+				interrupt-parent = <&bridge_intc>;
+				interrupts = <3>;
+				clocks = <&core_clk 0>;
+			};
+
 			crypto: crypto-engine@30000 {
 				compatible = "marvell,orion-crypto";
 				reg = <0x30000 0x10000>,
@@ -379,18 +392,10 @@
 				#clock-cells = <1>;
 			};
 
-			pmu_intc: pmu-interrupt-ctrl@d0050 {
-				compatible = "marvell,dove-pmu-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0xd0050 0x8>;
-				interrupts = <33>;
-				marvell,#interrupts = <7>;
-			};
-
 			pinctrl: pin-ctrl@d0200 {
 				compatible = "marvell,dove-pinctrl";
-				reg = <0xd0200 0x10>;
+				reg = <0xd0200 0x14>,
+				      <0xd0440 0x04>;
 				clocks = <&gate_clk 22>;
 
 				pmx_gpio_0: pmx-gpio-0 {
@@ -610,8 +615,12 @@
 			rtc: real-time-clock@d8500 {
 				compatible = "marvell,orion-rtc";
 				reg = <0xd8500 0x20>;
-				interrupt-parent = <&pmu_intc>;
-				interrupts = <5>;
+			};
+
+			gconf: global-config@e802c {
+				compatible = "marvell,dove-global-config",
+				             "syscon";
+				reg = <0xe802c 0x14>;
 			};
 
 			gpio2: gpio-ctrl@e8400 {
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 5babba0a3a7..83089540e32 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -7,11 +7,11 @@
  */
 /dts-v1/;
 
-#include "dra7.dtsi"
+#include "dra74x.dtsi"
 
 / {
-	model = "TI DRA7";
-	compatible = "ti,dra7-evm", "ti,dra752", "ti,dra7";
+	model = "TI DRA742";
+	compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7";
 
 	memory {
 		device_type = "memory";
@@ -93,6 +93,64 @@
 			0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
 		>;
 	};
+
+	qspi1_pins: pinmux_qspi1_pins {
+		pinctrl-single,pins = <
+			0x4c (PIN_INPUT | MUX_MODE1)  /* gpmc_a3.qspi1_cs2 */
+			0x50 (PIN_INPUT | MUX_MODE1)  /* gpmc_a4.qspi1_cs3 */
+			0x74 (PIN_INPUT | MUX_MODE1)  /* gpmc_a13.qspi1_rtclk */
+			0x78 (PIN_INPUT | MUX_MODE1)  /* gpmc_a14.qspi1_d3 */
+			0x7c (PIN_INPUT | MUX_MODE1)  /* gpmc_a15.qspi1_d2 */
+			0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
+			0x84 (PIN_INPUT | MUX_MODE1)  /* gpmc_a17.qspi1_d0 */
+			0x88 (PIN_INPUT | MUX_MODE1)  /* qpmc_a18.qspi1_sclk */
+			0xb8 (PIN_INPUT_PULLUP | MUX_MODE1)  /* gpmc_cs2.qspi1_cs0 */
+			0xbc (PIN_INPUT_PULLUP | MUX_MODE1)  /* gpmc_cs3.qspi1_cs1 */
+		>;
+	};
+
+	usb1_pins: pinmux_usb1_pins {
+                pinctrl-single,pins = <
+			0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+                >;
+        };
+
+	usb2_pins: pinmux_usb2_pins {
+                pinctrl-single,pins = <
+			0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
+                >;
+        };
+
+	nand_flash_x16: nand_flash_x16 {
+		/* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch
+		 * So NAND flash requires following switch settings:
+		 * SW5.9 (GPMC_WPN) = LOW
+		 * SW5.1 (NAND_BOOTn) = HIGH */
+		pinctrl-single,pins = <
+			0x0 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0	*/
+			0x4 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1	*/
+			0x8 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2	*/
+			0xc 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3	*/
+			0x10	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4	*/
+			0x14	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5	*/
+			0x18	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6	*/
+			0x1c	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7	*/
+			0x20	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad8	*/
+			0x24	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad9	*/
+			0x28	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad10	*/
+			0x2c	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad11	*/
+			0x30	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad12	*/
+			0x34	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad13	*/
+			0x38	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad14	*/
+			0x3c	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad15	*/
+			0xd8	(PIN_INPUT_PULLUP  | MUX_MODE0)	/* gpmc_wait0	*/
+			0xcc	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_wen	*/
+			0xb4	(PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_csn0	*/
+			0xc4	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_advn_ale */
+			0xc8	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_oen_ren	 */
+			0xd0	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_be0n_cle */
+		>;
+	};
 };
 
 &i2c1 {
@@ -182,6 +240,7 @@
 					regulator-name = "ldo3";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
 					regulator-boot-on;
 				};
 
@@ -273,3 +332,167 @@
 &cpu0 {
 	cpu0-supply = <&smps123_reg>;
 };
+
+&qspi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi1_pins>;
+
+	spi-max-frequency = <48000000>;
+	m25p80@0 {
+		compatible = "s25fl256s1";
+		spi-max-frequency = <48000000>;
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-cpol;
+		spi-cpha;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* MTD partition table.
+		 * The ROM checks the first four physical blocks
+		 * for a valid file to boot and the flash here is
+		 * 64KiB block size.
+		 */
+		partition@0 {
+			label = "QSPI.SPL";
+			reg = <0x00000000 0x000010000>;
+		};
+		partition@1 {
+			label = "QSPI.SPL.backup1";
+			reg = <0x00010000 0x00010000>;
+		};
+		partition@2 {
+			label = "QSPI.SPL.backup2";
+			reg = <0x00020000 0x00010000>;
+		};
+		partition@3 {
+			label = "QSPI.SPL.backup3";
+			reg = <0x00030000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.u-boot";
+			reg = <0x00040000 0x00100000>;
+		};
+		partition@5 {
+			label = "QSPI.u-boot-spl-os";
+			reg = <0x00140000 0x00010000>;
+		};
+		partition@6 {
+			label = "QSPI.u-boot-env";
+			reg = <0x00150000 0x00010000>;
+		};
+		partition@7 {
+			label = "QSPI.u-boot-env.backup1";
+			reg = <0x00160000 0x0010000>;
+		};
+		partition@8 {
+			label = "QSPI.kernel";
+			reg = <0x00170000 0x0800000>;
+		};
+		partition@9 {
+			label = "QSPI.file-system";
+			reg = <0x00970000 0x01690000>;
+		};
+	};
+};
+
+&usb1 {
+	dr_mode = "peripheral";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+};
+
+&usb2 {
+	dr_mode = "host";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_pins>;
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_flash_x16>;
+	ranges = <0 0 0 0x01000000>;	/* minimum GPMC partition = 16MB */
+	nand@0,0 {
+		reg = <0 0 4>;		/* device IO registers */
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <40>;
+		gpmc,cs-wr-off-ns = <40>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <30>;
+		gpmc,adv-wr-off-ns = <30>;
+		gpmc,we-on-ns = <5>;
+		gpmc,we-off-ns = <25>;
+		gpmc,oe-on-ns = <2>;
+		gpmc,oe-off-ns = <20>;
+		gpmc,access-ns = <20>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,rd-cycle-ns = <40>;
+		gpmc,wr-cycle-ns = <40>;
+		gpmc,wait-pin = <0>;
+		gpmc,wait-on-read;
+		gpmc,wait-on-write;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		/* MTD partition table */
+		/* All SPL-* partitions are sized to minimal length
+		 * which can be independently programmable. For
+		 * NAND flash this is equal to size of erase-block */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "NAND.SPL";
+			reg = <0x00000000 0x000020000>;
+		};
+		partition@1 {
+			label = "NAND.SPL.backup1";
+			reg = <0x00020000 0x00020000>;
+		};
+		partition@2 {
+			label = "NAND.SPL.backup2";
+			reg = <0x00040000 0x00020000>;
+		};
+		partition@3 {
+			label = "NAND.SPL.backup3";
+			reg = <0x00060000 0x00020000>;
+		};
+		partition@4 {
+			label = "NAND.u-boot-spl-os";
+			reg = <0x00080000 0x00040000>;
+		};
+		partition@5 {
+			label = "NAND.u-boot";
+			reg = <0x000c0000 0x00100000>;
+		};
+		partition@6 {
+			label = "NAND.u-boot-env";
+			reg = <0x001c0000 0x00020000>;
+		};
+		partition@7 {
+			label = "NAND.u-boot-env";
+			reg = <0x001e0000 0x00020000>;
+		};
+		partition@8 {
+			label = "NAND.kernel";
+			reg = <0x00200000 0x00800000>;
+		};
+		partition@9 {
+			label = "NAND.file-system";
+			reg = <0x00a00000 0x0f600000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 1fd75aa4639..80127638b37 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -33,28 +33,6 @@
 		serial5 = &uart6;
 	};
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-
-			operating-points = <
-				/* kHz    uV */
-				1000000	1060000
-				1176000	1160000
-				>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-		};
-	};
-
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
@@ -75,7 +53,7 @@
 	};
 
 	/*
-	 * The soc node represents the soc top level view. It is uses for IPs
+	 * The soc node represents the soc top level view. It is used for IPs
 	 * that are not memory mapped in the MPU view or for the MPU itself.
 	 */
 	soc {
@@ -89,18 +67,18 @@
 	/*
 	 * XXX: Use a flat representation of the SOC interconnect.
 	 * The real OMAP interconnect network is quite complex.
-	 * Since that will not bring real advantage to represent that in DT for
+	 * Since it will not bring real advantage to represent that in DT for
 	 * the moment, just use a fake OCP bus entry to represent the whole bus
 	 * hierarchy.
 	 */
 	ocp {
-		compatible = "ti,omap4-l3-noc", "simple-bus";
+		compatible = "ti,dra7-l3-noc", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
 		ti,hwmods = "l3_main_1", "l3_main_2";
-		reg = <0x44000000 0x2000>,
-		      <0x44800000 0x3000>;
+		reg = <0x44000000 0x1000000>,
+		      <0x45000000 0x1000>;
 		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 
@@ -149,6 +127,22 @@
 			ti,hwmods = "counter_32k";
 		};
 
+		dra7_ctrl_general: tisyscon@4a002e00 {
+			compatible = "syscon";
+			reg = <0x4a002e00 0x7c>;
+		};
+
+		pbias_regulator: pbias_regulator {
+			compatible = "ti,pbias-omap";
+			reg = <0 0x4>;
+			syscon = <&dra7_ctrl_general>;
+			pbias_mmc_reg: pbias_mmc_omap5 {
+				regulator-name = "pbias_mmc_omap5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+
 		dra7_pmx_core: pinmux@4a003400 {
 			compatible = "pinctrl-single";
 			reg = <0x4a003400 0x0464>;
@@ -464,6 +458,20 @@
 			ti,hwmods = "wd_timer2";
 		};
 
+		hwspinlock: spinlock@4a0f6000 {
+			compatible = "ti,omap4-hwspinlock";
+			reg = <0x4a0f6000 0x1000>;
+			ti,hwmods = "spinlock";
+			#hwlock-cells = <1>;
+		};
+
+		dmm@4e000000 {
+			compatible = "ti,omap5-dmm";
+			reg = <0x4e000000 0x800>;
+			interrupts = <0 113 0x4>;
+			ti,hwmods = "dmm";
+		};
+
 		i2c1: i2c@48070000 {
 			compatible = "ti,omap4-i2c";
 			reg = <0x48070000 0x100>;
@@ -524,6 +532,7 @@
 			dmas = <&sdma 61>, <&sdma 62>;
 			dma-names = "tx", "rx";
 			status = "disabled";
+			pbias-supply = <&pbias_mmc_reg>;
 		};
 
 		mmc2: mmc@480b4000 {
@@ -559,6 +568,138 @@
 			status = "disabled";
 		};
 
+		abb_mpu: regulator-abb-mpu {
+			compatible = "ti,abb-v3";
+			regulator-name = "abb_mpu";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			clocks = <&sys_clkin1>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
+			      <0x4ae06014 0x4>, <0x4a003b20 0x8>,
+			      <0x4ae0c158 0x4>;
+			reg-names = "setup-address", "control-address",
+				    "int-address", "efuse-address",
+				    "ldo-address";
+			ti,tranxdone-status-mask = <0x80>;
+			/* LDOVBBMPU_FBB_MUX_CTRL */
+			ti,ldovbb-override-mask = <0x400>;
+			/* LDOVBBMPU_FBB_VSET_OUT */
+			ti,ldovbb-vset-mask = <0x1F>;
+
+			/*
+			 * NOTE: only FBB mode used but actual vset will
+			 * determine final biasing
+			 */
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+			1060000		0	0x0	0 0x02000000 0x01F00000
+			1160000		0	0x4	0 0x02000000 0x01F00000
+			1210000		0	0x8	0 0x02000000 0x01F00000
+			>;
+		};
+
+		abb_ivahd: regulator-abb-ivahd {
+			compatible = "ti,abb-v3";
+			regulator-name = "abb_ivahd";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			clocks = <&sys_clkin1>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
+			      <0x4ae06010 0x4>, <0x4a0025cc 0x8>,
+			      <0x4a002470 0x4>;
+			reg-names = "setup-address", "control-address",
+				    "int-address", "efuse-address",
+				    "ldo-address";
+			ti,tranxdone-status-mask = <0x40000000>;
+			/* LDOVBBIVA_FBB_MUX_CTRL */
+			ti,ldovbb-override-mask = <0x400>;
+			/* LDOVBBIVA_FBB_VSET_OUT */
+			ti,ldovbb-vset-mask = <0x1F>;
+
+			/*
+			 * NOTE: only FBB mode used but actual vset will
+			 * determine final biasing
+			 */
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+			1055000		0	0x0	0 0x02000000 0x01F00000
+			1150000		0	0x4	0 0x02000000 0x01F00000
+			1250000		0	0x8	0 0x02000000 0x01F00000
+			>;
+		};
+
+		abb_dspeve: regulator-abb-dspeve {
+			compatible = "ti,abb-v3";
+			regulator-name = "abb_dspeve";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			clocks = <&sys_clkin1>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
+			      <0x4ae06010 0x4>, <0x4a0025e0 0x8>,
+			      <0x4a00246c 0x4>;
+			reg-names = "setup-address", "control-address",
+				    "int-address", "efuse-address",
+				    "ldo-address";
+			ti,tranxdone-status-mask = <0x20000000>;
+			/* LDOVBBDSPEVE_FBB_MUX_CTRL */
+			ti,ldovbb-override-mask = <0x400>;
+			/* LDOVBBDSPEVE_FBB_VSET_OUT */
+			ti,ldovbb-vset-mask = <0x1F>;
+
+			/*
+			 * NOTE: only FBB mode used but actual vset will
+			 * determine final biasing
+			 */
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+			1055000		0	0x0	0 0x02000000 0x01F00000
+			1150000		0	0x4	0 0x02000000 0x01F00000
+			1250000		0	0x8	0 0x02000000 0x01F00000
+			>;
+		};
+
+		abb_gpu: regulator-abb-gpu {
+			compatible = "ti,abb-v3";
+			regulator-name = "abb_gpu";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			clocks = <&sys_clkin1>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
+			      <0x4ae06010 0x4>, <0x4a003b08 0x8>,
+			      <0x4ae0c154 0x4>;
+			reg-names = "setup-address", "control-address",
+				    "int-address", "efuse-address",
+				    "ldo-address";
+			ti,tranxdone-status-mask = <0x10000000>;
+			/* LDOVBBGPU_FBB_MUX_CTRL */
+			ti,ldovbb-override-mask = <0x400>;
+			/* LDOVBBGPU_FBB_VSET_OUT */
+			ti,ldovbb-vset-mask = <0x1F>;
+
+			/*
+			 * NOTE: only FBB mode used but actual vset will
+			 * determine final biasing
+			 */
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+			1090000		0	0x0	0 0x02000000 0x01F00000
+			1210000		0	0x4	0 0x02000000 0x01F00000
+			1280000		0	0x8	0 0x02000000 0x01F00000
+			>;
+		};
+
 		mcspi1: spi@48098000 {
 			compatible = "ti,omap4-mcspi";
 			reg = <0x48098000 0x200>;
@@ -621,6 +762,238 @@
 			dma-names = "tx0", "rx0";
 			status = "disabled";
 		};
+
+		qspi: qspi@4b300000 {
+			compatible = "ti,dra7xxx-qspi";
+			reg = <0x4b300000 0x100>;
+			reg-names = "qspi_base";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "qspi";
+			clocks = <&qspi_gfclk_div>;
+			clock-names = "fck";
+			num-cs = <4>;
+			status = "disabled";
+		};
+
+		omap_control_sata: control-phy@4a002374 {
+			compatible = "ti,control-phy-pipe3";
+			reg = <0x4a002374 0x4>;
+			reg-names = "power";
+			clocks = <&sys_clkin1>;
+			clock-names = "sysclk";
+		};
+
+		/* OCP2SCP3 */
+		ocp2scp@4a090000 {
+			compatible = "ti,omap-ocp2scp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			reg = <0x4a090000 0x20>;
+			ti,hwmods = "ocp2scp3";
+			sata_phy: phy@4A096000 {
+				compatible = "ti,phy-pipe3-sata";
+				reg = <0x4A096000 0x80>, /* phy_rx */
+				      <0x4A096400 0x64>, /* phy_tx */
+				      <0x4A096800 0x40>; /* pll_ctrl */
+				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+				ctrl-module = <&omap_control_sata>;
+				clocks = <&sys_clkin1>;
+				clock-names = "sysclk";
+				#phy-cells = <0>;
+			};
+		};
+
+		sata: sata@4a141100 {
+			compatible = "snps,dwc-ahci";
+			reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&sata_phy>;
+			phy-names = "sata-phy";
+			clocks = <&sata_ref_clk>;
+			ti,hwmods = "sata";
+		};
+
+		omap_control_usb2phy1: control-phy@4a002300 {
+			compatible = "ti,control-phy-usb2";
+			reg = <0x4a002300 0x4>;
+			reg-names = "power";
+		};
+
+		omap_control_usb3phy1: control-phy@4a002370 {
+			compatible = "ti,control-phy-pipe3";
+			reg = <0x4a002370 0x4>;
+			reg-names = "power";
+		};
+
+		omap_control_usb2phy2: control-phy@0x4a002e74 {
+			compatible = "ti,control-phy-usb2-dra7";
+			reg = <0x4a002e74 0x4>;
+			reg-names = "power";
+		};
+
+		/* OCP2SCP1 */
+		ocp2scp@4a080000 {
+			compatible = "ti,omap-ocp2scp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			reg = <0x4a080000 0x20>;
+			ti,hwmods = "ocp2scp1";
+
+			usb2_phy1: phy@4a084000 {
+				compatible = "ti,omap-usb2";
+				reg = <0x4a084000 0x400>;
+				ctrl-module = <&omap_control_usb2phy1>;
+				clocks = <&usb_phy1_always_on_clk32k>,
+					 <&usb_otg_ss1_refclk960m>;
+				clock-names =	"wkupclk",
+						"refclk";
+				#phy-cells = <0>;
+			};
+
+			usb2_phy2: phy@4a085000 {
+				compatible = "ti,omap-usb2";
+				reg = <0x4a085000 0x400>;
+				ctrl-module = <&omap_control_usb2phy2>;
+				clocks = <&usb_phy2_always_on_clk32k>,
+					 <&usb_otg_ss2_refclk960m>;
+				clock-names =	"wkupclk",
+						"refclk";
+				#phy-cells = <0>;
+			};
+
+			usb3_phy1: phy@4a084400 {
+				compatible = "ti,omap-usb3";
+				reg = <0x4a084400 0x80>,
+				      <0x4a084800 0x64>,
+				      <0x4a084c00 0x40>;
+				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+				ctrl-module = <&omap_control_usb3phy1>;
+				clocks = <&usb_phy3_always_on_clk32k>,
+					 <&sys_clkin1>,
+					 <&usb_otg_ss1_refclk960m>;
+				clock-names =	"wkupclk",
+						"sysclk",
+						"refclk";
+				#phy-cells = <0>;
+			};
+		};
+
+		omap_dwc3_1@48880000 {
+			compatible = "ti,dwc3";
+			ti,hwmods = "usb_otg_ss1";
+			reg = <0x48880000 0x10000>;
+			interrupts = <0 77 4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <2>;
+			ranges;
+			usb1: usb@48890000 {
+				compatible = "snps,dwc3";
+				reg = <0x48890000 0x17000>;
+				interrupts = <0 76 4>;
+				phys = <&usb2_phy1>, <&usb3_phy1>;
+				phy-names = "usb2-phy", "usb3-phy";
+				tx-fifo-resize;
+				maximum-speed = "super-speed";
+				dr_mode = "otg";
+			};
+		};
+
+		omap_dwc3_2@488c0000 {
+			compatible = "ti,dwc3";
+			ti,hwmods = "usb_otg_ss2";
+			reg = <0x488c0000 0x10000>;
+			interrupts = <0 92 4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <2>;
+			ranges;
+			usb2: usb@488d0000 {
+				compatible = "snps,dwc3";
+				reg = <0x488d0000 0x17000>;
+				interrupts = <0 78 4>;
+				phys = <&usb2_phy2>;
+				phy-names = "usb2-phy";
+				tx-fifo-resize;
+				maximum-speed = "high-speed";
+				dr_mode = "otg";
+			};
+		};
+
+		/* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
+		omap_dwc3_3@48900000 {
+			compatible = "ti,dwc3";
+			ti,hwmods = "usb_otg_ss3";
+			reg = <0x48900000 0x10000>;
+		/*	interrupts = <0 TBD 4>; */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <2>;
+			ranges;
+			status = "disabled";
+			usb3: usb@48910000 {
+				compatible = "snps,dwc3";
+				reg = <0x48910000 0x17000>;
+		/*		interrupts = <0 93 4>; */
+				tx-fifo-resize;
+				maximum-speed = "high-speed";
+				dr_mode = "otg";
+			};
+		};
+
+		omap_dwc3_4@48940000 {
+			compatible = "ti,dwc3";
+			ti,hwmods = "usb_otg_ss4";
+			reg = <0x48940000 0x10000>;
+		/*	interrupts = <0 TBD 4>; */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <2>;
+			ranges;
+			status = "disabled";
+			usb4: usb@48950000 {
+				compatible = "snps,dwc3";
+				reg = <0x48950000 0x17000>;
+		/*		interrupts = <0 TBD 4>; */
+				tx-fifo-resize;
+				maximum-speed = "high-speed";
+				dr_mode = "otg";
+			};
+		};
+
+		elm: elm@48078000 {
+			compatible = "ti,am3352-elm";
+			reg = <0x48078000 0xfc0>;      /* device IO registers */
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "elm";
+			status = "disabled";
+		};
+
+		gpmc: gpmc@50000000 {
+			compatible = "ti,am3352-gpmc";
+			ti,hwmods = "gpmc";
+			reg = <0x50000000 0x37c>;      /* device IO registers */
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			gpmc,num-cs = <8>;
+			gpmc,num-waitpins = <2>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			status = "disabled";
+		};
+
+		atl: atl@4843c000 {
+			compatible = "ti,dra7-atl";
+			reg = <0x4843c000 0x3ff>;
+			ti,hwmods = "atl";
+			ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
+					     <&atl_clkin2_ck>, <&atl_clkin3_ck>;
+			clocks = <&atl_gfclk_mux>;
+			clock-names = "fck";
+			status = "disabled";
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
new file mode 100644
index 00000000000..51470234881
--- /dev/null
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dra72x.dtsi"
+
+/ {
+	model = "TI DRA722";
+	compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1024 MB */
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
new file mode 100644
index 00000000000..f1ec22f6ebf
--- /dev/null
+++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * Based on "omap4.dtsi"
+ */
+
+#include "dra7.dtsi"
+
+/ {
+	compatible = "ti,dra722", "ti,dra72", "ti,dra7";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
new file mode 100644
index 00000000000..a4e8bb9f95c
--- /dev/null
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * Based on "omap4.dtsi"
+ */
+
+#include "dra7.dtsi"
+
+/ {
+	compatible = "ti,dra742", "ti,dra74", "ti,dra7";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+
+			operating-points = <
+				/* kHz    uV */
+				1000000	1060000
+				1176000	1160000
+				>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index e96da9a898a..dc7a292fe93 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -10,26 +10,26 @@
 &cm_core_aon_clocks {
 	atl_clkin0_ck: atl_clkin0_ck {
 		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
+		compatible = "ti,dra7-atl-clock";
+		clocks = <&atl_gfclk_mux>;
 	};
 
 	atl_clkin1_ck: atl_clkin1_ck {
 		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
+		compatible = "ti,dra7-atl-clock";
+		clocks = <&atl_gfclk_mux>;
 	};
 
 	atl_clkin2_ck: atl_clkin2_ck {
 		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
+		compatible = "ti,dra7-atl-clock";
+		clocks = <&atl_gfclk_mux>;
 	};
 
-	atlclkin3_ck: atlclkin3_ck {
+	atl_clkin3_ck: atl_clkin3_ck {
 		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
+		compatible = "ti,dra7-atl-clock";
+		clocks = <&atl_gfclk_mux>;
 	};
 
 	hdmi_clkin_ck: hdmi_clkin_ck {
@@ -277,7 +277,7 @@
 
 	dpll_mpu_ck: dpll_mpu_ck {
 		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
+		compatible = "ti,omap5-mpu-dpll-clock";
 		clocks = <&sys_clkin1>, <&mpu_dpll_hs_clk_div>;
 		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
 	};
@@ -673,10 +673,12 @@
 
 	l3_iclk_div: l3_iclk_div {
 		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
+		compatible = "ti,divider-clock";
+		ti,max-div = <2>;
+		ti,bit-shift = <4>;
+		reg = <0x0100>;
 		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
+		ti,index-power-of-two;
 	};
 
 	l4_root_clk_div: l4_root_clk_div {
@@ -684,7 +686,7 @@
 		compatible = "fixed-factor-clock";
 		clocks = <&l3_iclk_div>;
 		clock-mult = <1>;
-		clock-div = <1>;
+		clock-div = <2>;
 	};
 
 	video1_clk2_div: video1_clk2_div {
@@ -730,7 +732,7 @@
 	mcasp1_ahclkr_mux: mcasp1_ahclkr_mux {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
 		ti,bit-shift = <28>;
 		reg = <0x0550>;
 	};
@@ -738,7 +740,7 @@
 	mcasp1_ahclkx_mux: mcasp1_ahclkx_mux {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
 		ti,bit-shift = <24>;
 		reg = <0x0550>;
 	};
@@ -1386,6 +1388,14 @@
 		ti,dividers = <1>, <8>;
 	};
 
+	l3init_960m_gfclk: l3init_960m_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x06c0>;
+	};
+
 	dss_32khz_clk: dss_32khz_clk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
@@ -1533,7 +1543,7 @@
 	usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_usb_clkdcoldo>;
+		clocks = <&l3init_960m_gfclk>;
 		ti,bit-shift = <8>;
 		reg = <0x13f0>;
 	};
@@ -1541,7 +1551,7 @@
 	usb_otg_ss2_refclk960m: usb_otg_ss2_refclk960m {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_usb_clkdcoldo>;
+		clocks = <&l3init_960m_gfclk>;
 		ti,bit-shift = <8>;
 		reg = <0x1340>;
 	};
@@ -1631,7 +1641,7 @@
 	mcasp2_ahclkr_mux: mcasp2_ahclkr_mux {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
 		ti,bit-shift = <28>;
 		reg = <0x1860>;
 	};
@@ -1639,8 +1649,8 @@
 	mcasp2_ahclkx_mux: mcasp2_ahclkx_mux {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <28>;
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
 		reg = <0x1860>;
 	};
 
@@ -1655,7 +1665,7 @@
 	mcasp3_ahclkx_mux: mcasp3_ahclkx_mux {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
 		ti,bit-shift = <24>;
 		reg = <0x1868>;
 	};
@@ -1671,7 +1681,7 @@
 	mcasp4_ahclkx_mux: mcasp4_ahclkx_mux {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
 		ti,bit-shift = <24>;
 		reg = <0x1898>;
 	};
@@ -1687,7 +1697,7 @@
 	mcasp5_ahclkx_mux: mcasp5_ahclkx_mux {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
 		ti,bit-shift = <24>;
 		reg = <0x1878>;
 	};
@@ -1703,7 +1713,7 @@
 	mcasp6_ahclkx_mux: mcasp6_ahclkx_mux {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
 		ti,bit-shift = <24>;
 		reg = <0x1904>;
 	};
@@ -1719,7 +1729,7 @@
 	mcasp7_ahclkx_mux: mcasp7_ahclkx_mux {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
 		ti,bit-shift = <24>;
 		reg = <0x1908>;
 	};
@@ -1735,7 +1745,7 @@
 	mcasp8_ahclk_mux: mcasp8_ahclk_mux {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
 		ti,bit-shift = <22>;
 		reg = <0x1890>;
 	};
diff --git a/arch/arm/boot/dts/efm32gg-dk3750.dts b/arch/arm/boot/dts/efm32gg-dk3750.dts
index aa5c0f6363d..b4031fa4a56 100644
--- a/arch/arm/boot/dts/efm32gg-dk3750.dts
+++ b/arch/arm/boot/dts/efm32gg-dk3750.dts
@@ -26,7 +26,7 @@
 		};
 
 		i2c@4000a000 {
-			location = <3>;
+			efm32,location = <3>;
 			status = "ok";
 
 			temp@48 {
diff --git a/arch/arm/boot/dts/efm32gg.dtsi b/arch/arm/boot/dts/efm32gg.dtsi
index a342ab0e6e4..106d505c5d3 100644
--- a/arch/arm/boot/dts/efm32gg.dtsi
+++ b/arch/arm/boot/dts/efm32gg.dtsi
@@ -84,7 +84,7 @@
 			status = "disabled";
 		};
 
-		spi2: spi@40x4000c800 { /* USART2 */
+		spi2: spi@4000c800 { /* USART2 */
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "efm32,spi";
@@ -110,7 +110,7 @@
 			status = "disabled";
 		};
 
-		uart2: uart@40x4000c800 { /* USART2 */
+		uart2: uart@4000c800 { /* USART2 */
 			compatible = "efm32,uart";
 			reg = <0x4000c800 0x400>;
 			interrupts = <18 19>;
diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
new file mode 100644
index 00000000000..47b92c150f4
--- /dev/null
+++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
@@ -0,0 +1,475 @@
+/*
+ * Samsung's Exynos3250 SoCs pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos3250 SoCs pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+&pinctrl_0 {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb: gpb {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <0x2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpa0-4", "gpa0-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c2_bus: i2c2-bus {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c3_bus: i2c3-bus {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c4_bus: i2c4-bus {
+		samsung,pins = "gpb-0", "gpb-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c5_bus: i2c5-bus {
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s2_bus: i2s2-bus {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pcm2_bus: pcm2-bus {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c6_bus: i2c6-bus {
+		samsung,pins = "gpc1-3", "gpc1-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpd0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpd0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c7_bus: i2c7-bus {
+		samsung,pins = "gpd0-2", "gpd0-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm2_out: pwm2-out {
+		samsung,pins = "gpd0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm3_out: pwm3-out {
+		samsung,pins = "gpd0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c0_bus: i2c0-bus {
+		samsung,pins = "gpd1-0", "gpd1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	mipi0_clk: mipi0-clk {
+		samsung,pins = "gpd1-0", "gpd1-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c1_bus: i2c1-bus {
+		samsung,pins = "gpd1-2", "gpd1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_1 {
+	gpe0: gpe0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpe1: gpe1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpe2: gpe2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpk0: gpk0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk1: gpk1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk2: gpk2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpl0: gpl0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm0: gpm0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm1: gpm1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm2: gpm2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm3: gpm3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm4: gpm4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx0: gpx0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>,
+				<0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>;
+		#interrupt-cells = <2>;
+	};
+
+	gpx1: gpx1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>,
+				<0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>;
+		#interrupt-cells = <2>;
+	};
+
+	gpx2: gpx2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpk0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpk0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cd: sd0-cd {
+		samsung,pins = "gpk0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_rdqs: sd0-rdqs {
+		samsung,pins = "gpk0-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpk0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpk1-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpk1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cd: sd1-cd {
+		samsung,pins = "gpk1-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pins = "gpk1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	cam_port_b_io: cam-port-b-io {
+		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
+				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
+				"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_port_b_clk_active: cam-port-b-clk-active {
+		samsung,pins = "gpm2-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	cam_port_b_clk_idle: cam-port-b-clk-idle {
+		samsung,pins = "gpm2-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_i2c0: fimc-is-i2c0 {
+		samsung,pins = "gpm4-0", "gpm4-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_i2c1: fimc-is-i2c1 {
+		samsung,pins = "gpm4-2", "gpm4-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_uart: fimc-is-uart {
+		samsung,pins = "gpm3-5", "gpm3-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
new file mode 100644
index 00000000000..3e678fa335b
--- /dev/null
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -0,0 +1,444 @@
+/*
+ * Samsung's Exynos3250 SoC device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos3250 SoC device nodes are listed in this file. Exynos3250
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos3250 SoC. As device tree coverage for Exynos3250 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/exynos3250.h>
+
+/ {
+	compatible = "samsung,exynos3250";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		mshc0 = &mshc_0;
+		mshc1 = &mshc_1;
+		spi0 = &spi_0;
+		spi1 = &spi_1;
+		i2c0 = &i2c_0;
+		i2c1 = &i2c_1;
+		i2c2 = &i2c_2;
+		i2c3 = &i2c_3;
+		i2c4 = &i2c_4;
+		i2c5 = &i2c_5;
+		i2c6 = &i2c_6;
+		i2c7 = &i2c_7;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <1>;
+			clock-frequency = <1000000000>;
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		fixed-rate-clocks {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			xusbxti: clock@0 {
+				compatible = "fixed-clock";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+				clock-frequency = <0>;
+				#clock-cells = <0>;
+				clock-output-names = "xusbxti";
+			};
+
+			xxti: clock@1 {
+				compatible = "fixed-clock";
+				reg = <1>;
+				clock-frequency = <0>;
+				#clock-cells = <0>;
+				clock-output-names = "xxti";
+			};
+
+			xtcxo: clock@2 {
+				compatible = "fixed-clock";
+				reg = <2>;
+				clock-frequency = <0>;
+				#clock-cells = <0>;
+				clock-output-names = "xtcxo";
+			};
+		};
+
+		sysram@02020000 {
+			compatible = "mmio-sram";
+			reg = <0x02020000 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x02020000 0x40000>;
+
+			smp-sysram@0 {
+				compatible = "samsung,exynos4210-sysram";
+				reg = <0x0 0x1000>;
+			};
+
+			smp-sysram@3f000 {
+				compatible = "samsung,exynos4210-sysram-ns";
+				reg = <0x3f000 0x1000>;
+			};
+		};
+
+		chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		sys_reg: syscon@10010000 {
+			compatible = "samsung,exynos3-sysreg", "syscon";
+			reg = <0x10010000 0x400>;
+		};
+
+		pmu_system_controller: system-controller@10020000 {
+			compatible = "samsung,exynos3250-pmu", "syscon";
+			reg = <0x10020000 0x4000>;
+		};
+
+		pd_cam: cam-power-domain@10023C00 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023C00 0x20>;
+		};
+
+		pd_mfc: mfc-power-domain@10023C40 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023C40 0x20>;
+		};
+
+		pd_g3d: g3d-power-domain@10023C60 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023C60 0x20>;
+		};
+
+		pd_lcd0: lcd0-power-domain@10023C80 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023C80 0x20>;
+		};
+
+		pd_isp: isp-power-domain@10023CA0 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023CA0 0x20>;
+		};
+
+		cmu: clock-controller@10030000 {
+			compatible = "samsung,exynos3250-cmu";
+			reg = <0x10030000 0x20000>;
+			#clock-cells = <1>;
+		};
+
+		rtc: rtc@10070000 {
+			compatible = "samsung,s3c6410-rtc";
+			reg = <0x10070000 0x100>;
+			interrupts = <0 73 0>, <0 74 0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@10481000 {
+			compatible = "arm,cortex-a15-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x10481000 0x1000>,
+			      <0x10482000 0x1000>,
+			      <0x10484000 0x2000>,
+			      <0x10486000 0x2000>;
+			interrupts = <1 9 0xf04>;
+		};
+
+		mct@10050000 {
+			compatible = "samsung,exynos4210-mct";
+			reg = <0x10050000 0x800>;
+			interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>,
+				     <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>;
+			clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
+			clock-names = "fin_pll", "mct";
+		};
+
+		pinctrl_1: pinctrl@11000000 {
+			compatible = "samsung,exynos3250-pinctrl";
+			reg = <0x11000000 0x1000>;
+			interrupts = <0 225 0>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <0 48 0>;
+			};
+		};
+
+		pinctrl_0: pinctrl@11400000 {
+			compatible = "samsung,exynos3250-pinctrl";
+			reg = <0x11400000 0x1000>;
+			interrupts = <0 240 0>;
+		};
+
+		mshc_0: mshc@12510000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12510000 0x1000>;
+			interrupts = <0 142 0>;
+			clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mshc_1: mshc@12520000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12520000 0x1000>;
+			interrupts = <0 143 0>;
+			clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		amba {
+			compatible = "arm,amba-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-parent = <&gic>;
+			ranges;
+
+			pdma0: pdma@12680000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x12680000 0x1000>;
+				interrupts = <0 138 0>;
+				clocks = <&cmu CLK_PDMA0>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+
+			pdma1: pdma@12690000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x12690000 0x1000>;
+				interrupts = <0 139 0>;
+				clocks = <&cmu CLK_PDMA1>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+		};
+
+		adc: adc@126C0000 {
+			compatible = "samsung,exynos-adc-v3";
+			reg = <0x126C0000 0x100>, <0x10020718 0x4>;
+			interrupts = <0 137 0>;
+			clock-names = "adc", "sclk_tsadc";
+			clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+			status = "disabled";
+		};
+
+		serial_0: serial@13800000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13800000 0x100>;
+			interrupts = <0 109 0>;
+			clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_1: serial@13810000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13810000 0x100>;
+			interrupts = <0 110 0>;
+			clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		i2c_0: i2c@13860000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13860000 0x100>;
+			interrupts = <0 113 0>;
+			clocks = <&cmu CLK_I2C0>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_bus>;
+			status = "disabled";
+		};
+
+		i2c_1: i2c@13870000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13870000 0x100>;
+			interrupts = <0 114 0>;
+			clocks = <&cmu CLK_I2C1>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_bus>;
+			status = "disabled";
+		};
+
+		i2c_2: i2c@13880000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13880000 0x100>;
+			interrupts = <0 115 0>;
+			clocks = <&cmu CLK_I2C2>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_bus>;
+			status = "disabled";
+		};
+
+		i2c_3: i2c@13890000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13890000 0x100>;
+			interrupts = <0 116 0>;
+			clocks = <&cmu CLK_I2C3>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_bus>;
+			status = "disabled";
+		};
+
+		i2c_4: i2c@138A0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138A0000 0x100>;
+			interrupts = <0 117 0>;
+			clocks = <&cmu CLK_I2C4>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_bus>;
+			status = "disabled";
+		};
+
+		i2c_5: i2c@138B0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138B0000 0x100>;
+			interrupts = <0 118 0>;
+			clocks = <&cmu CLK_I2C5>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c5_bus>;
+			status = "disabled";
+		};
+
+		i2c_6: i2c@138C0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138C0000 0x100>;
+			interrupts = <0 119 0>;
+			clocks = <&cmu CLK_I2C6>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c6_bus>;
+			status = "disabled";
+		};
+
+		i2c_7: i2c@138D0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138D0000 0x100>;
+			interrupts = <0 120 0>;
+			clocks = <&cmu CLK_I2C7>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c7_bus>;
+			status = "disabled";
+		};
+
+		spi_0: spi@13920000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x13920000 0x100>;
+			interrupts = <0 121 0>;
+			dmas = <&pdma0 7>, <&pdma0 6>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu CLK_SPI0>, <&cmu CLK_SCLK_SPI0>;
+			clock-names = "spi", "spi_busclk0";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_bus>;
+			status = "disabled";
+		};
+
+		spi_1: spi@13930000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x13930000 0x100>;
+			interrupts = <0 122 0>;
+			dmas = <&pdma1 7>, <&pdma1 6>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu CLK_SPI1>, <&cmu CLK_SCLK_SPI1>;
+			clock-names = "spi", "spi_busclk0";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_bus>;
+			status = "disabled";
+		};
+
+		pwm: pwm@139D0000 {
+			compatible = "samsung,exynos4210-pwm";
+			reg = <0x139D0000 0x1000>;
+			interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
+				     <0 107 0>, <0 108 0>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pmu {
+			compatible = "arm,cortex-a7-pmu";
+			interrupts = <0 18 0>, <0 19 0>;
+		};
+	};
+};
+
+#include "exynos3250-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 08452e183b5..17b22e9cc2a 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -19,6 +19,8 @@
  * published by the Free Software Foundation.
  */
 
+#include <dt-bindings/clock/exynos4.h>
+#include <dt-bindings/clock/exynos-audss-clk.h>
 #include "skeleton.dtsi"
 
 / {
@@ -44,6 +46,23 @@
 		fimc3 = &fimc_3;
 	};
 
+	clock_audss: clock-controller@03810000 {
+		compatible = "samsung,exynos4210-audss-clock";
+		reg = <0x03810000 0x0C>;
+		#clock-cells = <1>;
+	};
+
+	i2s0: i2s@03830000 {
+		compatible = "samsung,s5pv210-i2s";
+		reg = <0x03830000 0x100>;
+		clocks = <&clock_audss EXYNOS_I2S_BUS>;
+		clock-names = "iis";
+		dmas = <&pdma0 12>, <&pdma0 11>, <&pdma0 10>;
+		dma-names = "tx", "rx", "tx-sec";
+		samsung,idma-addr = <0x03000000>;
+		status = "disabled";
+	};
+
 	chipid@10000000 {
 		compatible = "samsung,exynos4210-chipid";
 		reg = <0x10000000 0x100>;
@@ -85,11 +104,16 @@
 		reg = <0x10023CE0 0x20>;
 	};
 
+	pd_gps_alive: gps-alive-power-domain@10023D00 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10023D00 0x20>;
+	};
+
 	gic: interrupt-controller@10490000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
-		reg = <0x10490000 0x1000>, <0x10480000 0x100>;
+		reg = <0x10490000 0x10000>, <0x10480000 0x10000>;
 	};
 
 	combiner: interrupt-controller@10440000 {
@@ -104,22 +128,39 @@
 		reg = <0x10010000 0x400>;
 	};
 
+	pmu_system_controller: system-controller@10020000 {
+		compatible = "samsung,exynos4210-pmu", "syscon";
+		reg = <0x10020000 0x4000>;
+	};
+
+	dsi_0: dsi@11C80000 {
+		compatible = "samsung,exynos4210-mipi-dsi";
+		reg = <0x11C80000 0x10000>;
+		interrupts = <0 79 0>;
+		samsung,power-domain = <&pd_lcd0>;
+		phys = <&mipi_phy 1>;
+		phy-names = "dsim";
+		clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI0>;
+		clock-names = "bus_clk", "pll_clk";
+		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
 	camera {
 		compatible = "samsung,fimc", "simple-bus";
 		status = "disabled";
 		#address-cells = <1>;
 		#size-cells = <1>;
+		#clock-cells = <1>;
+		clock-output-names = "cam_a_clkout", "cam_b_clkout";
 		ranges;
 
-		clock_cam: clock-controller {
-			 #clock-cells = <1>;
-		};
-
 		fimc_0: fimc@11800000 {
 			compatible = "samsung,exynos4210-fimc";
 			reg = <0x11800000 0x1000>;
 			interrupts = <0 84 0>;
-			clocks = <&clock 256>, <&clock 128>;
+			clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>;
 			clock-names = "fimc", "sclk_fimc";
 			samsung,power-domain = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
@@ -130,7 +171,7 @@
 			compatible = "samsung,exynos4210-fimc";
 			reg = <0x11810000 0x1000>;
 			interrupts = <0 85 0>;
-			clocks = <&clock 257>, <&clock 129>;
+			clocks = <&clock CLK_FIMC1>, <&clock CLK_SCLK_FIMC1>;
 			clock-names = "fimc", "sclk_fimc";
 			samsung,power-domain = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
@@ -141,7 +182,7 @@
 			compatible = "samsung,exynos4210-fimc";
 			reg = <0x11820000 0x1000>;
 			interrupts = <0 86 0>;
-			clocks = <&clock 258>, <&clock 130>;
+			clocks = <&clock CLK_FIMC2>, <&clock CLK_SCLK_FIMC2>;
 			clock-names = "fimc", "sclk_fimc";
 			samsung,power-domain = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
@@ -152,7 +193,7 @@
 			compatible = "samsung,exynos4210-fimc";
 			reg = <0x11830000 0x1000>;
 			interrupts = <0 87 0>;
-			clocks = <&clock 259>, <&clock 131>;
+			clocks = <&clock CLK_FIMC3>, <&clock CLK_SCLK_FIMC3>;
 			clock-names = "fimc", "sclk_fimc";
 			samsung,power-domain = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
@@ -163,7 +204,7 @@
 			compatible = "samsung,exynos4210-csis";
 			reg = <0x11880000 0x4000>;
 			interrupts = <0 78 0>;
-			clocks = <&clock 260>, <&clock 134>;
+			clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>;
 			clock-names = "csis", "sclk_csis";
 			bus-width = <4>;
 			samsung,power-domain = <&pd_cam>;
@@ -178,7 +219,7 @@
 			compatible = "samsung,exynos4210-csis";
 			reg = <0x11890000 0x4000>;
 			interrupts = <0 80 0>;
-			clocks = <&clock 261>, <&clock 135>;
+			clocks = <&clock CLK_CSIS1>, <&clock CLK_SCLK_CSIS1>;
 			clock-names = "csis", "sclk_csis";
 			bus-width = <2>;
 			samsung,power-domain = <&pd_cam>;
@@ -194,7 +235,7 @@
 		compatible = "samsung,s3c2410-wdt";
 		reg = <0x10060000 0x100>;
 		interrupts = <0 43 0>;
-		clocks = <&clock 345>;
+		clocks = <&clock CLK_WDT>;
 		clock-names = "watchdog";
 		status = "disabled";
 	};
@@ -203,7 +244,7 @@
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x10070000 0x100>;
 		interrupts = <0 44 0>, <0 45 0>;
-		clocks = <&clock 346>;
+		clocks = <&clock CLK_RTC>;
 		clock-names = "rtc";
 		status = "disabled";
 	};
@@ -212,7 +253,7 @@
 		compatible = "samsung,s5pv210-keypad";
 		reg = <0x100A0000 0x100>;
 		interrupts = <0 109 0>;
-		clocks = <&clock 347>;
+		clocks = <&clock CLK_KEYIF>;
 		clock-names = "keypad";
 		status = "disabled";
 	};
@@ -221,7 +262,7 @@
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12510000 0x100>;
 		interrupts = <0 73 0>;
-		clocks = <&clock 297>, <&clock 145>;
+		clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
 		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
 	};
@@ -230,7 +271,7 @@
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12520000 0x100>;
 		interrupts = <0 74 0>;
-		clocks = <&clock 298>, <&clock 146>;
+		clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
 		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
 	};
@@ -239,7 +280,7 @@
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12530000 0x100>;
 		interrupts = <0 75 0>;
-		clocks = <&clock 299>, <&clock 147>;
+		clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
 		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
 	};
@@ -248,16 +289,37 @@
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12540000 0x100>;
 		interrupts = <0 76 0>;
-		clocks = <&clock 300>, <&clock 148>;
+		clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
 		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
 	};
 
+	exynos_usbphy: exynos-usbphy@125B0000 {
+		compatible = "samsung,exynos4210-usb2-phy";
+		reg = <0x125B0000 0x100>;
+		samsung,pmureg-phandle = <&pmu_system_controller>;
+		clocks = <&clock CLK_USB_DEVICE>, <&clock CLK_XUSBXTI>;
+		clock-names = "phy", "ref";
+		#phy-cells = <1>;
+		status = "disabled";
+	};
+
+	hsotg@12480000 {
+		compatible = "samsung,s3c6400-hsotg";
+		reg = <0x12480000 0x20000>;
+		interrupts = <0 71 0>;
+		clocks = <&clock CLK_USB_DEVICE>;
+		clock-names = "otg";
+		phys = <&exynos_usbphy 0>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
 	ehci@12580000 {
 		compatible = "samsung,exynos4210-ehci";
 		reg = <0x12580000 0x100>;
 		interrupts = <0 70 0>;
-		clocks = <&clock 304>;
+		clocks = <&clock CLK_USB_HOST>;
 		clock-names = "usbhost";
 		status = "disabled";
 	};
@@ -266,17 +328,37 @@
 		compatible = "samsung,exynos4210-ohci";
 		reg = <0x12590000 0x100>;
 		interrupts = <0 70 0>;
-		clocks = <&clock 304>;
+		clocks = <&clock CLK_USB_HOST>;
 		clock-names = "usbhost";
 		status = "disabled";
 	};
 
+	i2s1: i2s@13960000 {
+		compatible = "samsung,s5pv210-i2s";
+		reg = <0x13960000 0x100>;
+		clocks = <&clock CLK_I2S1>;
+		clock-names = "iis";
+		dmas = <&pdma1 12>, <&pdma1 11>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	i2s2: i2s@13970000 {
+		compatible = "samsung,s5pv210-i2s";
+		reg = <0x13970000 0x100>;
+		clocks = <&clock CLK_I2S2>;
+		clock-names = "iis";
+		dmas = <&pdma0 14>, <&pdma0 13>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
 	mfc: codec@13400000 {
 		compatible = "samsung,mfc-v5";
 		reg = <0x13400000 0x10000>;
 		interrupts = <0 94 0>;
 		samsung,power-domain = <&pd_mfc>;
-		clocks = <&clock 273>;
+		clocks = <&clock CLK_MFC>;
 		clock-names = "mfc";
 		status = "disabled";
 	};
@@ -285,7 +367,7 @@
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13800000 0x100>;
 		interrupts = <0 52 0>;
-		clocks = <&clock 312>, <&clock 151>;
+		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
 		clock-names = "uart", "clk_uart_baud0";
 		status = "disabled";
 	};
@@ -294,7 +376,7 @@
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13810000 0x100>;
 		interrupts = <0 53 0>;
-		clocks = <&clock 313>, <&clock 152>;
+		clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
 		clock-names = "uart", "clk_uart_baud0";
 		status = "disabled";
 	};
@@ -303,7 +385,7 @@
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13820000 0x100>;
 		interrupts = <0 54 0>;
-		clocks = <&clock 314>, <&clock 153>;
+		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
 		clock-names = "uart", "clk_uart_baud0";
 		status = "disabled";
 	};
@@ -312,7 +394,7 @@
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13830000 0x100>;
 		interrupts = <0 55 0>;
-		clocks = <&clock 315>, <&clock 154>;
+		clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
 		clock-names = "uart", "clk_uart_baud0";
 		status = "disabled";
 	};
@@ -323,7 +405,7 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13860000 0x100>;
 		interrupts = <0 58 0>;
-		clocks = <&clock 317>;
+		clocks = <&clock CLK_I2C0>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c0_bus>;
@@ -336,7 +418,7 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13870000 0x100>;
 		interrupts = <0 59 0>;
-		clocks = <&clock 318>;
+		clocks = <&clock CLK_I2C1>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c1_bus>;
@@ -349,8 +431,10 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13880000 0x100>;
 		interrupts = <0 60 0>;
-		clocks = <&clock 319>;
+		clocks = <&clock CLK_I2C2>;
 		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_bus>;
 		status = "disabled";
 	};
 
@@ -360,8 +444,10 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13890000 0x100>;
 		interrupts = <0 61 0>;
-		clocks = <&clock 320>;
+		clocks = <&clock CLK_I2C3>;
 		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_bus>;
 		status = "disabled";
 	};
 
@@ -371,8 +457,10 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138A0000 0x100>;
 		interrupts = <0 62 0>;
-		clocks = <&clock 321>;
+		clocks = <&clock CLK_I2C4>;
 		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c4_bus>;
 		status = "disabled";
 	};
 
@@ -382,8 +470,10 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138B0000 0x100>;
 		interrupts = <0 63 0>;
-		clocks = <&clock 322>;
+		clocks = <&clock CLK_I2C5>;
 		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c5_bus>;
 		status = "disabled";
 	};
 
@@ -393,8 +483,10 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138C0000 0x100>;
 		interrupts = <0 64 0>;
-		clocks = <&clock 323>;
+		clocks = <&clock CLK_I2C6>;
 		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c6_bus>;
 		status = "disabled";
 	};
 
@@ -404,8 +496,10 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138D0000 0x100>;
 		interrupts = <0 65 0>;
-		clocks = <&clock 324>;
+		clocks = <&clock CLK_I2C7>;
 		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c7_bus>;
 		status = "disabled";
 	};
 
@@ -417,7 +511,7 @@
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 327>, <&clock 159>;
+		clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
 		clock-names = "spi", "spi_busclk0";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi0_bus>;
@@ -432,7 +526,7 @@
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 328>, <&clock 160>;
+		clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
 		clock-names = "spi", "spi_busclk0";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi1_bus>;
@@ -447,7 +541,7 @@
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 329>, <&clock 161>;
+		clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
 		clock-names = "spi", "spi_busclk0";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi2_bus>;
@@ -458,9 +552,9 @@
 		compatible = "samsung,exynos4210-pwm";
 		reg = <0x139D0000 0x1000>;
 		interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
-		clocks = <&clock 336>;
+		clocks = <&clock CLK_PWM>;
 		clock-names = "timers";
-		#pwm-cells = <2>;
+		#pwm-cells = <3>;
 		status = "disabled";
 	};
 
@@ -475,7 +569,7 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12680000 0x1000>;
 			interrupts = <0 35 0>;
-			clocks = <&clock 292>;
+			clocks = <&clock CLK_PDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
@@ -486,7 +580,7 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12690000 0x1000>;
 			interrupts = <0 36 0>;
-			clocks = <&clock 293>;
+			clocks = <&clock CLK_PDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
@@ -497,7 +591,7 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12850000 0x1000>;
 			interrupts = <0 34 0>;
-			clocks = <&clock 279>;
+			clocks = <&clock CLK_MDMA>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
@@ -511,7 +605,7 @@
 		reg = <0x11c00000 0x20000>;
 		interrupt-names = "fifo", "vsync", "lcd_sys";
 		interrupts = <11 0>, <11 1>, <11 2>;
-		clocks = <&clock 140>, <&clock 283>;
+		clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>;
 		clock-names = "sclk_fimd", "fimd";
 		samsung,power-domain = <&pd_lcd0>;
 		status = "disabled";
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 2aa13cb3bbe..f767c425d0b 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -16,10 +16,11 @@
 
 /dts-v1/;
 #include "exynos4210.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Insignal Origen evaluation board based on Exynos4210";
-	compatible = "insignal,origen", "samsung,exynos4210";
+	compatible = "insignal,origen", "samsung,exynos4210", "samsung,exynos4";
 
 	memory {
 		reg = <0x40000000 0x10000000
@@ -48,6 +49,14 @@
 		};
 	};
 
+	watchdog@10060000 {
+		status = "okay";
+	};
+
+	rtc@10070000 {
+		status = "okay";
+	};
+
 	tmu@100C0000 {
 		status = "okay";
 	};
@@ -251,35 +260,35 @@
 		up {
 			label = "Up";
 			gpios = <&gpx2 0 1>;
-			linux,code = <103>;
+			linux,code = <KEY_UP>;
 			gpio-key,wakeup;
 		};
 
 		down {
 			label = "Down";
 			gpios = <&gpx2 1 1>;
-			linux,code = <108>;
+			linux,code = <KEY_DOWN>;
 			gpio-key,wakeup;
 		};
 
 		back {
 			label = "Back";
 			gpios = <&gpx1 7 1>;
-			linux,code = <158>;
+			linux,code = <KEY_BACK>;
 			gpio-key,wakeup;
 		};
 
 		home {
 			label = "Home";
 			gpios = <&gpx1 6 1>;
-			linux,code = <102>;
+			linux,code = <KEY_HOME>;
 			gpio-key,wakeup;
 		};
 
 		menu {
 			label = "Menu";
 			gpios = <&gpx1 5 1>;
-			linux,code = <139>;
+			linux,code = <KEY_MENU>;
 			gpio-key,wakeup;
 		};
 	};
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 9c01b718d29..636d1668475 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -19,7 +19,7 @@
 
 / {
 	model = "Samsung smdkv310 evaluation board based on Exynos4210";
-	compatible = "samsung,smdkv310", "samsung,exynos4210";
+	compatible = "samsung,smdkv310", "samsung,exynos4210", "samsung,exynos4";
 
 	memory {
 		reg = <0x40000000 0x80000000>;
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 63cc571ca30..f516da9e8b3 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -17,7 +17,7 @@
 
 / {
 	model = "Samsung Trats based on Exynos4210";
-	compatible = "samsung,trats", "samsung,exynos4210";
+	compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4";
 
 	memory {
 		reg =  <0x40000000 0x10000000
@@ -88,6 +88,12 @@
 		};
 	};
 
+	hsotg@12480000 {
+		vusb_d-supply = <&vusb_reg>;
+		vusb_a-supply = <&vusbdac_reg>;
+		status = "okay";
+	};
+
 	sdhci_emmc: sdhci@12510000 {
 		bus-width = <8>;
 		non-removable;
@@ -97,6 +103,10 @@
 		status = "okay";
 	};
 
+	exynos-usbphy@125B0000 {
+		status = "okay";
+	};
+
 	serial@13800000 {
 		status = "okay";
 	};
@@ -353,6 +363,67 @@
 		};
 	};
 
+	dsi_0: dsi@11C80000 {
+		vddcore-supply = <&vusb_reg>;
+		vddio-supply = <&vmipi_reg>;
+		samsung,pll-clock-frequency = <24000000>;
+		status = "okay";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+
+				dsi_out: endpoint {
+					remote-endpoint = <&dsi_in>;
+					samsung,burst-clock-frequency = <500000000>;
+					samsung,esc-clock-frequency = <20000000>;
+				};
+			};
+		};
+
+		panel@0 {
+			reg = <0>;
+			compatible = "samsung,s6e8aa0";
+			vdd3-supply = <&vcclcd_reg>;
+			vci-supply = <&vlcd_reg>;
+			reset-gpios = <&gpy4 5 0>;
+			power-on-delay= <50>;
+			reset-delay = <100>;
+			init-delay = <100>;
+			flip-horizontal;
+			flip-vertical;
+			panel-width-mm = <58>;
+			panel-height-mm = <103>;
+
+			display-timings {
+				timing-0 {
+					clock-frequency = <57153600>;
+					hactive = <720>;
+					vactive = <1280>;
+					hfront-porch = <5>;
+					hback-porch = <5>;
+					hsync-len = <5>;
+					vfront-porch = <13>;
+					vback-porch = <1>;
+					vsync-len = <2>;
+				};
+			};
+
+			port {
+				dsi_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+		};
+	};
+
+	fimd@11c00000 {
+		status = "okay";
+	};
+
 	camera {
 		pinctrl-names = "default";
 		pinctrl-0 = <>;
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index d2e3f5f5916..d50eb3aa708 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -17,7 +17,7 @@
 
 / {
 	model = "Samsung Universal C210 based on Exynos4210 rev0";
-	compatible = "samsung,universal_c210", "samsung,exynos4210";
+	compatible = "samsung,universal_c210", "samsung,exynos4210", "samsung,exynos4";
 
 	memory {
 		reg =  <0x40000000 0x10000000
@@ -28,6 +28,21 @@
 		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1";
 	};
 
+	sysram@02020000 {
+		smp-sysram@0 {
+			status = "disabled";
+		};
+
+		smp-sysram@5000 {
+			compatible = "samsung,exynos4210-sysram";
+			reg = <0x5000 0x1000>;
+		};
+
+		smp-sysram@1f000 {
+			status = "disabled";
+		};
+	};
+
 	mct@10050000 {
 		compatible = "none";
 	};
@@ -53,6 +68,12 @@
 		enable-active-high;
 	};
 
+	hsotg@12480000 {
+		vusb_d-supply = <&ldo3_reg>;
+		vusb_a-supply = <&ldo8_reg>;
+		status = "okay";
+	};
+
 	sdhci_emmc: sdhci@12510000 {
 		bus-width = <8>;
 		non-removable;
@@ -62,6 +83,34 @@
 		status = "okay";
 	};
 
+	sdhci_sd: sdhci@12530000 {
+		bus-width = <4>;
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+		pinctrl-names = "default";
+		vmmc-supply = <&ldo5_reg>;
+		cd-gpios = <&gpx3 4 0>;
+		cd-inverted;
+		status = "okay";
+	};
+
+	ehci@12580000 {
+		status = "okay";
+		port@0 {
+			status = "okay";
+		};
+	};
+
+	ohci@12590000 {
+		status = "okay";
+		port@0 {
+			status = "okay";
+		};
+	};
+
+	exynos-usbphy@125B0000 {
+		status = "okay";
+	};
+
 	serial@13800000 {
 		status = "okay";
 	};
@@ -201,6 +250,7 @@
 					regulator-name = "VUSB+MIPI_1.1V";
 					regulator-min-microvolt = <1100000>;
 					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
 				};
 
 				ldo4_reg: LDO4 {
@@ -231,6 +281,7 @@
 					regulator-name = "VUSB+VDAC_3.3V";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
 				};
 
 				ldo9_reg: LDO9 {
@@ -345,10 +396,97 @@
 		};
 	};
 
+	spi-lcd {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-sck = <&gpy3 1 0>;
+		gpio-mosi = <&gpy3 3 0>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpy4 3 0>;
+
+		lcd@0 {
+			compatible = "samsung,ld9040";
+			reg = <0>;
+			vdd3-supply = <&ldo7_reg>;
+			vci-supply = <&ldo17_reg>;
+			reset-gpios = <&gpy4 5 0>;
+			spi-max-frequency = <1200000>;
+			spi-cpol;
+			spi-cpha;
+			power-on-delay = <10>;
+			reset-delay = <10>;
+			panel-width-mm = <90>;
+			panel-height-mm = <154>;
+			display-timings {
+				timing {
+					clock-frequency = <23492370>;
+					hactive = <480>;
+					vactive = <800>;
+					hback-porch = <16>;
+					hfront-porch = <16>;
+					vback-porch = <2>;
+					vfront-porch = <28>;
+					hsync-len = <2>;
+					vsync-len = <1>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					de-active = <0>;
+					pixelclk-active = <0>;
+				};
+			};
+			port {
+				lcd_ep: endpoint {
+					remote-endpoint = <&fimd_dpi_ep>;
+				};
+			};
+		};
+	};
+
+	fimd: fimd@11c00000 {
+		pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
+		pinctrl-names = "default";
+		status = "okay";
+		samsung,invert-vden;
+		samsung,invert-vclk;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@3 {
+			reg = <3>;
+			fimd_dpi_ep: endpoint {
+				remote-endpoint = <&lcd_ep>;
+			};
+		};
+	};
+
 	pwm@139D0000 {
 		compatible = "samsung,s5p6440-pwm";
 		status = "okay";
 	};
+
+	camera {
+		status = "okay";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <>;
+
+		fimc_0: fimc@11800000 {
+			status = "okay";
+		};
+
+		fimc_1: fimc@11810000 {
+			status = "okay";
+		};
+
+		fimc_2: fimc@11820000 {
+			status = "okay";
+		};
+
+		fimc_3: fimc@11830000 {
+			status = "okay";
+		};
+	};
 };
 
 &mdma1 {
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 48ecd7a755a..ee3001f3882 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -23,7 +23,7 @@
 #include "exynos4210-pinctrl.dtsi"
 
 / {
-	compatible = "samsung,exynos4210";
+	compatible = "samsung,exynos4210", "samsung,exynos4";
 
 	aliases {
 		pinctrl0 = &pinctrl_0;
@@ -31,6 +31,24 @@
 		pinctrl2 = &pinctrl_2;
 	};
 
+	sysram@02020000 {
+		compatible = "mmio-sram";
+		reg = <0x02020000 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x02020000 0x20000>;
+
+		smp-sysram@0 {
+			compatible = "samsung,exynos4210-sysram";
+			reg = <0x0 0x1000>;
+		};
+
+		smp-sysram@1f000 {
+			compatible = "samsung,exynos4210-sysram-ns";
+			reg = <0x1f000 0x1000>;
+		};
+	};
+
 	pd_lcd1: lcd1-power-domain@10023CA0 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023CA0 0x20>;
@@ -53,7 +71,7 @@
 		reg = <0x10050000 0x800>;
 		interrupt-parent = <&mct_map>;
 		interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
-		clocks = <&clock 3>, <&clock 344>;
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
 		clock-names = "fin_pll", "mct";
 
 		mct_map: mct-map {
@@ -109,7 +127,7 @@
 		interrupt-parent = <&combiner>;
 		reg = <0x100C0000 0x100>;
 		interrupts = <2 4>;
-		clocks = <&clock 383>;
+		clocks = <&clock CLK_TMU_APBIF>;
 		clock-names = "tmu_apbif";
 		status = "disabled";
 	};
@@ -118,13 +136,14 @@
 		compatible = "samsung,s5pv210-g2d";
 		reg = <0x12800000 0x1000>;
 		interrupts = <0 89 0>;
-		clocks = <&clock 177>, <&clock 277>;
+		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
 		clock-names = "sclk_fimg2d", "fimg2d";
 		status = "disabled";
 	};
 
 	camera {
-		clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>;
+		clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
+			 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
 		clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
 
 		fimc_0: fimc@11800000 {
diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi
index 94a43f9a05e..3c00e6ec930 100644
--- a/arch/arm/boot/dts/exynos4212.dtsi
+++ b/arch/arm/boot/dts/exynos4212.dtsi
@@ -20,18 +20,13 @@
 #include "exynos4x12.dtsi"
 
 / {
-	compatible = "samsung,exynos4212";
+	compatible = "samsung,exynos4212", "samsung,exynos4";
 
-	gic: interrupt-controller@10490000 {
-		cpu-offset = <0x8000>;
+	combiner: interrupt-controller@10440000 {
+		samsung,combiner-nr = <18>;
 	};
 
-	interrupt-controller@10440000 {
-		samsung,combiner-nr = <18>;
-		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-			     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
-			     <0 107 0>, <0 108 0>;
+	gic: interrupt-controller@10490000 {
+		cpu-offset = <0x8000>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 9804fcb71f8..31db28a4bb3 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -16,7 +16,7 @@
 
 / {
 	model = "Hardkernel ODROID-X board based on Exynos4412";
-	compatible = "hardkernel,odroid-x", "samsung,exynos4412";
+	compatible = "hardkernel,odroid-x", "samsung,exynos4412", "samsung,exynos4";
 
 	memory {
 		reg = <0x40000000 0x40000000>;
@@ -251,7 +251,7 @@
 				buck2_reg: BUCK2 {
 					regulator-name = "vdd_arm";
 					regulator-min-microvolt = <900000>;
-					regulator-max-microvolt = <1300000>;
+					regulator-max-microvolt = <1350000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index 6bc053924e9..e925c9fbfb0 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -14,10 +14,11 @@
 
 /dts-v1/;
 #include "exynos4412.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Insignal Origen evaluation board based on Exynos4412";
-	compatible = "insignal,origen4412", "samsung,exynos4412";
+	compatible = "insignal,origen4412", "samsung,exynos4412", "samsung,exynos4";
 
 	memory {
 		reg = <0x40000000 0x40000000>;
@@ -48,6 +49,14 @@
 		};
 	};
 
+	watchdog@10060000 {
+		status = "okay";
+	};
+
+	rtc@10070000 {
+		status = "okay";
+	};
+
 	pinctrl@11000000 {
 		keypad_rows: keypad-rows {
 			samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
@@ -76,37 +85,37 @@
 		key_home {
 			keypad,row = <0>;
 			keypad,column = <0>;
-			linux,code = <102>;
+			linux,code = <KEY_HOME>;
 		};
 
 		key_down {
 			keypad,row = <0>;
 			keypad,column = <1>;
-			linux,code = <108>;
+			linux,code = <KEY_DOWN>;
 		};
 
 		key_up {
 			keypad,row = <1>;
 			keypad,column = <0>;
-			linux,code = <103>;
+			linux,code = <KEY_UP>;
 		};
 
 		key_menu {
 			keypad,row = <1>;
 			keypad,column = <1>;
-			linux,code = <139>;
+			linux,code = <KEY_MENU>;
 		};
 
 		key_back {
 			keypad,row = <2>;
 			keypad,column = <0>;
-			linux,code = <158>;
+			linux,code = <KEY_BACK>;
 		};
 
 		key_enter {
 			keypad,row = <2>;
 			keypad,column = <1>;
-			linux,code = <28>;
+			linux,code = <KEY_ENTER>;
 		};
 	};
 
@@ -459,8 +468,8 @@
 
 				buck2_reg: BUCK2 {
 					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <925000>;
-					regulator-max-microvolt	= <1300000>;
+					regulator-min-microvolt = <900000>;
+					regulator-max-microvolt	= <1350000>;
 					regulator-always-on;
 					regulator-boot-on;
 					op_mode = <1>; /* Normal Mode */
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
index ad316a1ee9e..ded0b70f764 100644
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -17,7 +17,7 @@
 
 / {
 	model = "Samsung SMDK evaluation board based on Exynos4412";
-	compatible = "samsung,smdk4412", "samsung,exynos4412";
+	compatible = "samsung,smdk4412", "samsung,exynos4412", "samsung,exynos4";
 
 	memory {
 		reg = <0x40000000 0x40000000>;
diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts
index 0a9831256b3..ea6929d9c62 100644
--- a/arch/arm/boot/dts/exynos4412-tiny4412.dts
+++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts
@@ -16,7 +16,7 @@
 
 / {
 	model = "FriendlyARM TINY4412 board based on Exynos4412";
-	compatible = "friendlyarm,tiny4412", "samsung,exynos4412";
+	compatible = "friendlyarm,tiny4412", "samsung,exynos4412", "samsung,exynos4";
 
 	memory {
 		reg = <0x40000000 0x40000000>;
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 4f851ccf40e..77878447b31 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -17,10 +17,11 @@
 
 / {
 	model = "Samsung Trats 2 based on Exynos4412";
-	compatible = "samsung,trats2", "samsung,exynos4412";
+	compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
 
 	aliases {
-		i2c8 = &i2c_ak8975;
+		i2c9 = &i2c_ak8975;
+		i2c10 = &i2c_cm36651;
 	};
 
 	memory {
@@ -71,39 +72,81 @@
 			enable-active-high;
 		};
 
-		/* More to come */
+		lcd_vdd3_reg: voltage-regulator-2 {
+			compatible = "regulator-fixed";
+			regulator-name = "LCD_VDD_2.2V";
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2200000>;
+			gpio = <&gpc0 1 0>;
+			enable-active-high;
+		};
+
+		cam_af_reg: voltage-regulator-3 {
+			compatible = "regulator-fixed";
+			regulator-name = "CAM_AF";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpm0 4 0>;
+			enable-active-high;
+		};
+
+		cam_isp_core_reg: voltage-regulator-4 {
+			compatible = "regulator-fixed";
+			regulator-name = "CAM_ISP_CORE_1.2V_EN";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			gpio = <&gpm0 3 0>;
+			enable-active-high;
+			regulator-always-on;
+		};
+
+		ps_als_reg: voltage-regulator-5 {
+			compatible = "regulator-fixed";
+			regulator-name = "LED_A_3.0V";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			gpio = <&gpj0 5 0>;
+			enable-active-high;
+		};
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
 
 		key-down {
-			interrupt-parent = <&gpj1>;
-			interrupts = <2 0>;
-			gpios = <&gpj1 2 1>;
+			gpios = <&gpx3 3 1>;
 			linux,code = <114>;
 			label = "volume down";
 			debounce-interval = <10>;
 		};
 
 		key-up {
-			interrupt-parent = <&gpj1>;
-			interrupts = <1 0>;
-			gpios = <&gpj1 1 1>;
+			gpios = <&gpx2 2 1>;
 			linux,code = <115>;
 			label = "volume up";
 			debounce-interval = <10>;
 		};
 
 		key-power {
-			interrupt-parent = <&gpx2>;
-			interrupts = <7 0>;
 			gpios = <&gpx2 7 1>;
 			linux,code = <116>;
 			label = "power";
 			debounce-interval = <10>;
 			gpio-key,wakeup;
 		};
+
+		key-ok {
+			gpios = <&gpx0 1 1>;
+			linux,code = <139>;
+			label = "ok";
+			debounce-inteval = <10>;
+			gpio-key,wakeup;
+		};
+	};
+
+	adc: adc@126C0000 {
+		vdd-supply = <&ldo3_reg>;
+		status = "okay";
 	};
 
 	i2c@13890000 {
@@ -126,6 +169,38 @@
 		};
 	};
 
+	i2c_0: i2c@13860000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-slave-addr = <0x10>;
+		samsung,i2c-max-bus-freq = <400000>;
+		pinctrl-0 = <&i2c0_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		s5c73m3@3c {
+			compatible = "samsung,s5c73m3";
+			reg = <0x3c>;
+			standby-gpios = <&gpm0 1 1>;   /* ISP_STANDBY */
+			xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */
+			vdd-int-supply = <&buck9_reg>;
+			vddio-cis-supply = <&ldo9_reg>;
+			vdda-supply = <&ldo17_reg>;
+			vddio-host-supply = <&ldo18_reg>;
+			vdd-af-supply = <&cam_af_reg>;
+			vdd-reg-supply = <&cam_io_reg>;
+			clock-frequency = <24000000>;
+			/* CAM_A_CLKOUT */
+			clocks = <&camera 0>;
+			clock-names = "cis_extclk";
+			port {
+				s5c73m3_ep: endpoint {
+					remote-endpoint = <&csis0_ep>;
+					data-lanes = <1 2 3 4>;
+				};
+			};
+		};
+	};
+
 	i2c@138D0000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-slave-addr = <0x10>;
@@ -489,12 +564,28 @@
 		status = "okay";
 
 		ak8975@0c {
-			compatible = "ak,ak8975";
+			compatible = "asahi-kasei,ak8975";
 			reg = <0x0c>;
 			gpios = <&gpj0 7 0>;
 		};
 	};
 
+	i2c_cm36651: i2c-gpio-2 {
+		compatible = "i2c-gpio";
+		gpios = <&gpf0 0 1>, <&gpf0 1 1>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cm36651@18 {
+			compatible = "capella,cm36651";
+			reg = <0x18>;
+			interrupt-parent = <&gpx0>;
+			interrupts = <2 2>;
+			vled-supply = <&ps_als_reg>;
+		};
+	};
+
 	spi_1: spi@13930000 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi1_bus>;
@@ -511,8 +602,69 @@
 		};
 	};
 
-	camera {
-		pinctrl-0 = <&cam_port_b_clk_active>;
+	dsi_0: dsi@11C80000 {
+		vddcore-supply = <&ldo8_reg>;
+		vddio-supply = <&ldo10_reg>;
+		samsung,pll-clock-frequency = <24000000>;
+		status = "okay";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+
+				dsi_out: endpoint {
+					remote-endpoint = <&dsi_in>;
+					samsung,burst-clock-frequency = <500000000>;
+					samsung,esc-clock-frequency = <20000000>;
+				};
+			};
+		};
+
+		panel@0 {
+			compatible = "samsung,s6e8aa0";
+			reg = <0>;
+			vdd3-supply = <&lcd_vdd3_reg>;
+			vci-supply = <&ldo25_reg>;
+			reset-gpios = <&gpy4 5 0>;
+			power-on-delay= <50>;
+			reset-delay = <100>;
+			init-delay = <100>;
+			flip-horizontal;
+			flip-vertical;
+			panel-width-mm = <58>;
+			panel-height-mm = <103>;
+
+			display-timings {
+				timing-0 {
+					clock-frequency = <0>;
+					hactive = <720>;
+					vactive = <1280>;
+					hfront-porch = <5>;
+					hback-porch = <5>;
+					hsync-len = <5>;
+					vfront-porch = <13>;
+					vback-porch = <1>;
+					vsync-len = <2>;
+				};
+			};
+
+			port {
+				dsi_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+		};
+	};
+
+	fimd@11c00000 {
+		status = "okay";
+	};
+
+	camera: camera {
+		pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
 		pinctrl-names = "default";
 		status = "okay";
 
@@ -532,6 +684,23 @@
 			status = "okay";
 		};
 
+		csis_0: csis@11880000 {
+			status = "okay";
+			vddcore-supply = <&ldo8_reg>;
+			vddio-supply = <&ldo10_reg>;
+			clock-frequency = <176000000>;
+
+			/* Camera C (3) MIPI CSI-2 (CSIS0) */
+			port@3 {
+				reg = <3>;
+				csis0_ep: endpoint {
+					remote-endpoint = <&s5c73m3_ep>;
+					data-lanes = <1 2 3 4>;
+					samsung,csis-hs-settle = <12>;
+				};
+			};
+		};
+
 		csis_1: csis@11890000 {
 			vddcore-supply = <&ldo8_reg>;
 			vddio-supply = <&ldo10_reg>;
@@ -572,10 +741,11 @@
 					reg = <0x10>;
 					svdda-supply = <&cam_io_reg>;
 					svddio-supply = <&ldo19_reg>;
+					afvdd-supply = <&ldo19_reg>;
 					clock-frequency = <24000000>;
 					/* CAM_B_CLKOUT */
-					clocks = <&clock_cam 1>;
-					clock-names = "mclk";
+					clocks = <&camera 1>;
+					clock-names = "extclk";
 					samsung,camclk-out = <1>;
 					gpios = <&gpm1 6 0>;
 
@@ -589,4 +759,30 @@
 			};
 		};
 	};
+
+	exynos-usbphy@125B0000 {
+		status = "okay";
+	};
+
+	hsotg@12480000 {
+		vusb_d-supply = <&ldo15_reg>;
+		vusb_a-supply = <&ldo12_reg>;
+		status = "okay";
+	};
+
+	thermistor-ap@0 {
+		compatible = "ntc,ncp15wb473";
+		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
+		pullup-ohm = <100000>;	 /* 100K */
+		pulldown-ohm = <100000>; /* 100K */
+		io-channels = <&adc 1>;  /* AP temperature */
+	};
+
+	thermistor-battery@1 {
+		compatible = "ntc,ncp15wb473";
+		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
+		pullup-ohm = <100000>;	 /* 100K */
+		pulldown-ohm = <100000>; /* 100K */
+		io-channels = <&adc 2>;  /* Battery temperature */
+	};
 };
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 87b339c739d..c42a3e196cd 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -20,19 +20,17 @@
 #include "exynos4x12.dtsi"
 
 / {
-	compatible = "samsung,exynos4412";
+	compatible = "samsung,exynos4412", "samsung,exynos4";
+
+	combiner: interrupt-controller@10440000 {
+		samsung,combiner-nr = <20>;
+	};
 
 	gic: interrupt-controller@10490000 {
 		cpu-offset = <0x4000>;
 	};
 
-	interrupt-controller@10440000 {
-		samsung,combiner-nr = <20>;
-		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-			     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
-			     <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>;
+	pmu_system_controller: system-controller@10020000 {
+		compatible = "samsung,exynos4412-pmu", "syscon";
 	};
-
 };
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index 5c412aa1473..c5a943df1cd 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -31,6 +31,30 @@
 		mshc0 = &mshc_0;
 	};
 
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&combiner>;
+		interrupts = <2 2>, <3 2>, <18 2>, <19 2>;
+	};
+
+	sysram@02020000 {
+		compatible = "mmio-sram";
+		reg = <0x02020000 0x40000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x02020000 0x40000>;
+
+		smp-sysram@0 {
+			compatible = "samsung,exynos4210-sysram";
+			reg = <0x0 0x1000>;
+		};
+
+		smp-sysram@2f000 {
+			compatible = "samsung,exynos4210-sysram-ns";
+			reg = <0x2f000 0x1000>;
+		};
+	};
+
 	pd_isp: isp-power-domain@10023CA0 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023CA0 0x20>;
@@ -47,7 +71,7 @@
 		reg = <0x10050000 0x800>;
 		interrupt-parent = <&mct_map>;
 		interrupts = <0>, <1>, <2>, <3>, <4>;
-		clocks = <&clock 3>, <&clock 344>;
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
 		clock-names = "fin_pll", "mct";
 
 		mct_map: mct-map {
@@ -62,6 +86,14 @@
 		};
 	};
 
+	combiner: interrupt-controller@10440000 {
+		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+			     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
+			     <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>;
+	};
+
 	pinctrl_0: pinctrl@11400000 {
 		compatible = "samsung,exynos4x12-pinctrl";
 		reg = <0x11400000 0x1000>;
@@ -80,6 +112,18 @@
 		};
 	};
 
+	adc: adc@126C0000 {
+		compatible = "samsung,exynos-adc-v1";
+		reg = <0x126C0000 0x100>, <0x10020718 0x4>;
+		interrupt-parent = <&combiner>;
+		interrupts = <10 3>;
+		clocks = <&clock CLK_TSADC>;
+		clock-names = "adc";
+		#io-channel-cells = <1>;
+		io-channel-ranges;
+		status = "disabled";
+	};
+
 	pinctrl_2: pinctrl@03860000 {
 		compatible = "samsung,exynos4x12-pinctrl";
 		reg = <0x03860000 0x1000>;
@@ -93,17 +137,22 @@
 		interrupts = <0 72 0>;
 	};
 
+	pmu_system_controller: system-controller@10020000 {
+		compatible = "samsung,exynos4212-pmu", "syscon";
+	};
+
 	g2d@10800000 {
 		compatible = "samsung,exynos4212-g2d";
 		reg = <0x10800000 0x1000>;
 		interrupts = <0 89 0>;
-		clocks = <&clock 177>, <&clock 277>;
+		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
 		clock-names = "sclk_fimg2d", "fimg2d";
 		status = "disabled";
 	};
 
 	camera {
-		clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>;
+		clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
+			 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
 		clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
 
 		fimc_0: fimc@11800000 {
@@ -145,7 +194,7 @@
 			reg = <0x12390000 0x1000>;
 			interrupts = <0 105 0>;
 			samsung,power-domain = <&pd_isp>;
-			clocks = <&clock 353>;
+			clocks = <&clock CLK_FIMC_LITE0>;
 			clock-names = "flite";
 			status = "disabled";
 		};
@@ -155,7 +204,7 @@
 			reg = <0x123A0000 0x1000>;
 			interrupts = <0 106 0>;
 			samsung,power-domain = <&pd_isp>;
-			clocks = <&clock 354>;
+			clocks = <&clock CLK_FIMC_LITE1>;
 			clock-names = "flite";
 			status = "disabled";
 		};
@@ -165,12 +214,19 @@
 			reg = <0x12000000 0x260000>;
 			interrupts = <0 90 0>, <0 95 0>;
 			samsung,power-domain = <&pd_isp>;
-			clocks = <&clock 353>, <&clock 354>, <&clock 355>,
-				<&clock 356>, <&clock 17>, <&clock 357>,
-				<&clock 358>, <&clock 359>, <&clock 360>,
-				<&clock 450>,<&clock 451>, <&clock 452>,
-				<&clock 453>, <&clock 176>, <&clock 13>,
-				<&clock 454>, <&clock 395>, <&clock 455>;
+			clocks = <&clock CLK_FIMC_LITE0>,
+				 <&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>,
+				 <&clock CLK_PPMUISPMX>,
+				 <&clock CLK_MOUT_MPLL_USER_T>,
+				 <&clock CLK_FIMC_ISP>, <&clock CLK_FIMC_DRC>,
+				 <&clock CLK_FIMC_FD>, <&clock CLK_MCUISP>,
+				 <&clock CLK_DIV_ISP0>,<&clock CLK_DIV_ISP1>,
+				 <&clock CLK_DIV_MCUISP0>,
+				 <&clock CLK_DIV_MCUISP1>,
+				 <&clock CLK_SCLK_UART_ISP>,
+				 <&clock CLK_ACLK200>, <&clock CLK_DIV_ACLK200>,
+				 <&clock CLK_ACLK400_MCUISP>,
+				 <&clock CLK_DIV_ACLK400_MCUISP>;
 			clock-names = "lite0", "lite1", "ppmuispx",
 				      "ppmuispmx", "mpll", "isp",
 				      "drc", "fd", "mcuisp",
@@ -190,7 +246,7 @@
 			i2c1_isp: i2c-isp@12140000 {
 				compatible = "samsung,exynos4212-i2c-isp";
 				reg = <0x12140000 0x100>;
-				clocks = <&clock 370>;
+				clocks = <&clock CLK_I2C1_ISP>;
 				clock-names = "i2c_isp";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -205,8 +261,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		fifo-depth = <0x80>;
-		clocks = <&clock 301>, <&clock 149>;
+		clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>;
 		clock-names = "biu", "ciu";
 		status = "disabled";
 	};
+
+	exynos-usbphy@125B0000 {
+		compatible = "samsung,exynos4x12-usb2-phy";
+		samsung,sysreg-phandle = <&sys_reg>;
+	};
 };
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index 258dca441f3..79d0608d6dc 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -81,13 +81,6 @@
 		status = "disabled";
 	};
 
-	watchdog {
-		compatible = "samsung,s3c2410-wdt";
-		reg = <0x101D0000 0x100>;
-		interrupts = <0 42 0>;
-		status = "disabled";
-	};
-
 	fimd@14400000 {
 		compatible = "samsung,exynos5250-fimd";
 		interrupt-parent = <&combiner>;
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index b42e658876e..d0de1f50d15 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -12,10 +12,11 @@
 /dts-v1/;
 #include "exynos5250.dtsi"
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Insignal Arndale evaluation board based on EXYNOS5250";
-	compatible = "insignal,arndale", "samsung,exynos5250";
+	compatible = "insignal,arndale", "samsung,exynos5250", "samsung,exynos5";
 
 	memory {
 		reg = <0x40000000 0x80000000>;
@@ -25,6 +26,10 @@
 		bootargs = "console=ttySAC2,115200";
 	};
 
+	rtc@101E0000 {
+		status = "okay";
+	};
+
 	codec@11000000 {
 		samsung,mfc-r = <0x43000000 0x800000>;
 		samsung,mfc-l = <0x51000000 0x800000>;
@@ -103,6 +108,7 @@
 					regulator-name = "VDD_IOPERI_1.8V";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
 					op_mode = <1>;
 				};
 
@@ -287,6 +293,7 @@
 					regulator-name = "vdd_g3d";
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
 					regulator-boot-on;
 					op_mode = <1>;
 				};
@@ -370,6 +377,27 @@
 		};
 	};
 
+	i2c@121D0000 {
+		status = "okay";
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <40000>;
+		samsung,i2c-slave-addr = <0x38>;
+
+		sata_phy_i2c:sata-phy@38 {
+			compatible = "samsung,exynos-sataphy-i2c";
+			reg = <0x38>;
+		};
+	};
+
+	sata@122F0000 {
+		status = "okay";
+	};
+
+	sata-phy@12170000 {
+		status = "okay";
+		samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
+	};
+
 	mmc_0: mmc@12200000 {
 		status = "okay";
 		num-slots = <1>;
@@ -418,42 +446,42 @@
 		menu {
 			label = "SW-TACT2";
 			gpios = <&gpx1 4 1>;
-			linux,code = <139>;
+			linux,code = <KEY_MENU>;
 			gpio-key,wakeup;
 		};
 
 		home {
 			label = "SW-TACT3";
 			gpios = <&gpx1 5 1>;
-			linux,code = <102>;
+			linux,code = <KEY_HOME>;
 			gpio-key,wakeup;
 		};
 
 		up {
 			label = "SW-TACT4";
 			gpios = <&gpx1 6 1>;
-			linux,code = <103>;
+			linux,code = <KEY_UP>;
 			gpio-key,wakeup;
 		};
 
 		down {
 			label = "SW-TACT5";
 			gpios = <&gpx1 7 1>;
-			linux,code = <108>;
+			linux,code = <KEY_DOWN>;
 			gpio-key,wakeup;
 		};
 
 		back {
 			label = "SW-TACT6";
 			gpios = <&gpx2 0 1>;
-			linux,code = <158>;
+			linux,code = <KEY_BACK>;
 			gpio-key,wakeup;
 		};
 
 		wakeup {
 			label = "SW-TACT7";
 			gpios = <&gpx2 1 1>;
-			linux,code = <143>;
+			linux,code = <KEY_WAKEUP>;
 			gpio-key,wakeup;
 		};
 	};
diff --git a/arch/arm/boot/dts/exynos5250-cros-common.dtsi b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
index 2c1560d52f1..89ac90f59e2 100644
--- a/arch/arm/boot/dts/exynos5250-cros-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
@@ -240,7 +240,7 @@
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <378000>;
 
-		hdmiphy@38 {
+		hdmiphy: hdmiphy@38 {
 			compatible = "samsung,exynos4212-hdmiphy";
 			reg = <0x38>;
 		};
@@ -304,6 +304,10 @@
 
 	hdmi {
 		hpd-gpio = <&gpx3 7 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_hpd_irq>;
+		phy = <&hdmiphy>;
+		ddc = <&i2c_2>;
 	};
 
 	gpio-keys {
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi