diff options
Diffstat (limited to 'firmware/Makefile')
| -rw-r--r-- | firmware/Makefile | 112 |
1 files changed, 79 insertions, 33 deletions
diff --git a/firmware/Makefile b/firmware/Makefile index 466106fa214..0862d34cf7d 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -4,10 +4,10 @@ # Create $(fwabs) from $(CONFIG_EXTRA_FIRMWARE_DIR) -- if it doesn't have a # leading /, it's relative to $(srctree). -fwdir := $(subst ",,$(CONFIG_EXTRA_FIRMWARE_DIR)) +fwdir := $(subst $(quote),,$(CONFIG_EXTRA_FIRMWARE_DIR)) fwabs := $(addprefix $(srctree)/,$(filter-out /%,$(fwdir)))$(filter /%,$(fwdir)) -fw-external-y := $(subst ",,$(CONFIG_EXTRA_FIRMWARE)) +fw-external-y := $(subst $(quote),,$(CONFIG_EXTRA_FIRMWARE)) # There are three cases to care about: # 1. Building kernel with CONFIG_FIRMWARE_IN_KERNEL=y -- $(fw-shipped-y) should @@ -31,15 +31,58 @@ fw-shipped-$(CONFIG_ADAPTEC_STARFIRE) += adaptec/starfire_rx.bin \ adaptec/starfire_tx.bin fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw +fw-shipped-$(CONFIG_BNX2X) += bnx2x/bnx2x-e1-6.2.9.0.fw \ + bnx2x/bnx2x-e1h-6.2.9.0.fw \ + bnx2x/bnx2x-e2-6.2.9.0.fw +fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-6.2.1a.fw \ + bnx2/bnx2-rv2p-09-6.0.17.fw \ + bnx2/bnx2-rv2p-09ax-6.0.17.fw \ + bnx2/bnx2-mips-06-6.2.1.fw \ + bnx2/bnx2-rv2p-06-6.0.15.fw fw-shipped-$(CONFIG_CASSINI) += sun/cassini.bin -fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin fw-shipped-$(CONFIG_CHELSIO_T3) += cxgb3/t3b_psram-1.1.0.bin \ cxgb3/t3c_psram-1.1.0.bin \ - cxgb3/t3fw-7.0.0.bin + cxgb3/ael2005_opt_edc.bin \ + cxgb3/ael2005_twx_edc.bin \ + cxgb3/ael2020_twx_edc.bin +fw-shipped-$(CONFIG_DRM_MGA) += matrox/g200_warp.fw matrox/g400_warp.fw +fw-shipped-$(CONFIG_DRM_R128) += r128/r128_cce.bin +fw-shipped-$(CONFIG_DRM_RADEON) += radeon/R100_cp.bin radeon/R200_cp.bin \ + radeon/R300_cp.bin radeon/R420_cp.bin \ + radeon/RS690_cp.bin radeon/RS600_cp.bin \ + radeon/R520_cp.bin \ + radeon/R600_pfp.bin radeon/R600_me.bin \ + radeon/RV610_pfp.bin radeon/RV610_me.bin \ + radeon/RV630_pfp.bin radeon/RV630_me.bin \ + radeon/RV620_pfp.bin radeon/RV620_me.bin \ + radeon/RV635_pfp.bin radeon/RV635_me.bin \ + radeon/RV670_pfp.bin radeon/RV670_me.bin \ + radeon/RS780_pfp.bin radeon/RS780_me.bin \ + radeon/RV770_pfp.bin radeon/RV770_me.bin \ + radeon/RV730_pfp.bin radeon/RV730_me.bin \ + radeon/RV710_pfp.bin radeon/RV710_me.bin +fw-shipped-$(CONFIG_DVB_AV7110) += av7110/bootcode.bin fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \ e100/d102e_ucode.bin -fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin +fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin +fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis cis/PCMLM28.cis \ + cis/DP83903.cis cis/NE2K.cis \ + cis/tamarack.cis cis/PE-200.cis \ + cis/PE520.cis +fw-shipped-$(CONFIG_PCMCIA_3C589) += cis/3CXEM556.cis +fw-shipped-$(CONFIG_PCMCIA_3C574) += cis/3CCFEM556.cis +fw-shipped-$(CONFIG_SERIAL_8250_CS) += cis/MT5634ZLX.cis cis/RS-COM-2P.cis \ + cis/COMpad2.cis cis/COMpad4.cis \ + cis/SW_555_SER.cis cis/SW_7xx_SER.cis \ + cis/SW_8xx_SER.cis +fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin +fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \ + advansys/3550.bin advansys/38C0800.bin +fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += qlogic/1040.bin qlogic/1280.bin \ + qlogic/12160.bin +fw-shipped-$(CONFIG_SCSI_QLOGICPTI) += qlogic/isp1000.bin +fw-shipped-$(CONFIG_INFINIBAND_QIB) += qlogic/sd7220.fw fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \ ess/maestro3_assp_minisrc.fw @@ -49,9 +92,11 @@ fw-shipped-$(CONFIG_SND_SB16_CSP) += sb16/mulaw_main.csp sb16/alaw_main.csp \ sb16/ima_adpcm_capture.csp fw-shipped-$(CONFIG_SND_YMFPCI) += yamaha/ds1_ctrl.fw yamaha/ds1_dsp.fw \ yamaha/ds1e_ctrl.fw +fw-shipped-$(CONFIG_SND_WAVEFRONT) += yamaha/yss225_registers.bin +fw-shipped-$(CONFIG_TEHUTI) += tehuti/bdx.bin fw-shipped-$(CONFIG_TIGON3) += tigon/tg3.bin tigon/tg3_tso.bin \ tigon/tg3_tso5.bin -fw-shipped-$(CONFIG_USB_DABUSB) += dabusb/firmware.fw dabusb/bitstream.bin +fw-shipped-$(CONFIG_TYPHOON) += 3com/typhoon.bin fw-shipped-$(CONFIG_USB_EMI26) += emi26/loader.fw emi26/firmware.fw \ emi26/bitstream.fw fw-shipped-$(CONFIG_USB_EMI62) += emi62/loader.fw emi62/bitstream.fw \ @@ -89,23 +134,18 @@ fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda/keyspan_pda.fw fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin +fw-shipped-$(CONFIG_YAM) += yam/1200.bin yam/9600.bin fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-) -# Directories which we _might_ need to create, so we have a rule for them. -firmware-dirs := $(sort $(patsubst %,$(objtree)/$(obj)/%/,$(dir $(fw-external-y) $(fw-shipped-all)))) - -quiet_cmd_mkdir = MKDIR $(patsubst $(objtree)/%,%,$@) - cmd_mkdir = mkdir -p $@ - quiet_cmd_ihex = IHEX $@ cmd_ihex = $(OBJCOPY) -Iihex -Obinary $< $@ quiet_cmd_ihex2fw = IHEX2FW $@ - cmd_ihex2fw = $(objtree)/scripts/ihex2fw $< $@ + cmd_ihex2fw = $(objtree)/$(obj)/ihex2fw $< $@ quiet_cmd_h16tofw = H16TOFW $@ - cmd_h16tofw = $(objtree)/scripts/ihex2fw -w $< $@ + cmd_h16tofw = $(objtree)/$(obj)/ihex2fw -w $< $@ quiet_cmd_fwbin = MK_FW $@ cmd_fwbin = FWNAME="$(patsubst firmware/%.gen.S,%,$@)"; \ @@ -138,21 +178,10 @@ wordsize_deps := $(wildcard include/config/64bit.h include/config/32bit.h \ include/config/superh32.h include/config/superh64.h \ include/config/x86_32.h include/config/x86_64.h) -# Workaround for make < 3.81, where .SECONDEXPANSION doesn't work. -# It'll end up depending on these targets, so make them a PHONY rule which -# depends on _all_ the directories in $(firmware-dirs), and it'll work out OK. -PHONY += $(objtree)/$$(%) $(objtree)/$(obj)/$$(%) -$(objtree)/$$(%) $(objtree)/$(obj)/$$(%): $(firmware-dirs) - @true - -# For the $$(dir %) trick, where we need % to be expanded first. -.SECONDEXPANSION: - -$(patsubst %,$(obj)/%.gen.S, $(fw-shipped-y)): %: $(wordsize_deps) \ - | $(objtree)/$$(dir %) +$(patsubst %,$(obj)/%.gen.S, $(fw-shipped-y)): %: $(wordsize_deps) $(call cmd,fwbin,$(patsubst %.gen.S,%,$@)) $(patsubst %,$(obj)/%.gen.S, $(fw-external-y)): %: $(wordsize_deps) \ - include/config/extra/firmware/dir.h | $(objtree)/$$(dir %) + include/config/extra/firmware/dir.h $(call cmd,fwbin,$(fwabs)/$(patsubst $(obj)/%.gen.S,%,$@)) # The .o files depend on the binaries directly; the .S files don't. @@ -161,26 +190,41 @@ $(patsubst %,$(obj)/%.gen.o, $(fw-external-y)): $(obj)/%.gen.o: $(fwdir)/% # .ihex is used just as a simple way to hold binary files in a source tree # where binaries are frowned upon. They are directly converted with objcopy. -$(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %) +$(obj)/%: $(obj)/%.ihex $(call cmd,ihex) +# Don't depend on ihex2fw if we're installing and it already exists. +# Putting it after | in the dependencies doesn't seem sufficient when +# we're installing after a cross-compile, because ihex2fw has dependencies +# on stuff like /usr/lib/gcc/ppc64-redhat-linux/4.3.0/include/stddef.h and +# thus wants to be rebuilt. Which it can't be, if the prebuilt kernel tree +# is exported read-only for someone to run 'make install'. +ifeq ($(INSTALL):$(wildcard $(obj)/ihex2fw),install:$(obj)/ihex2fw) +ihex2fw_dep := +else +ihex2fw_dep := $(obj)/ihex2fw +endif + # .HEX is also Intel HEX, but where the offset and length in each record # is actually meaningful, because the firmware has to be loaded in a certain # order rather than as a single binary blob. Thus, we convert them into our # more compact binary representation of ihex records (<linux/ihex.h>) -$(obj)/%.fw: $(obj)/%.HEX | $(objtree)/$(obj)/$$(dir %) +$(obj)/%.fw: $(obj)/%.HEX $(ihex2fw_dep) $(call cmd,ihex2fw) # .H16 is our own modified form of Intel HEX, with 16-bit length for records. -$(obj)/%.fw: $(obj)/%.H16 | $(objtree)/$(obj)/$$(dir %) +$(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) $(call cmd,h16tofw) -$(firmware-dirs): - $(call cmd,mkdir) - obj-y += $(patsubst %,%.gen.o, $(fw-external-y)) obj-$(CONFIG_FIRMWARE_IN_KERNEL) += $(patsubst %,%.gen.o, $(fw-shipped-y)) +ifeq ($(KBUILD_SRC),) +# Makefile.build only creates subdirectories for O= builds, but external +# firmware might live outside the kernel source tree +_dummy := $(foreach d,$(addprefix $(obj)/,$(dir $(fw-external-y))), $(shell [ -d $(d) ] || mkdir -p $(d))) +endif + # Remove .S files and binaries created from ihex # (during 'make clean' .config isn't included so they're all in $(fw-shipped-)) targets := $(fw-shipped-) $(patsubst $(obj)/%,%, \ @@ -189,3 +233,5 @@ targets := $(fw-shipped-) $(patsubst $(obj)/%,%, \ # Without this, built-in.o won't be created when it's empty, and the # final vmlinux link will fail. obj-n := dummy + +hostprogs-y := ihex2fw |