diff options
Diffstat (limited to 'drivers/watchdog/wdt_pci.c')
| -rw-r--r-- | drivers/watchdog/wdt_pci.c | 479 |
1 files changed, 234 insertions, 245 deletions
diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c index 1355608683e..48b2c058b00 100644 --- a/drivers/watchdog/wdt_pci.c +++ b/drivers/watchdog/wdt_pci.c @@ -1,8 +1,8 @@ /* * Industrial Computer Source PCI-WDT500/501 driver * - * (c) Copyright 1996-1997 Alan Cox <alan@redhat.com>, All Rights Reserved. - * http://www.redhat.com + * (c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -29,12 +29,16 @@ * JP Nollmann : Added support for PCI wdt501p * Alan Cox : Split ISA and PCI cards into two drivers * Jeff Garzik : PCI cleanups - * Tigran Aivazian : Restructured wdtpci_init_one() to handle failures - * Joel Becker : Added WDIOC_GET/SETTIMEOUT - * Zwane Mwaikambo : Magic char closing, locking changes, cleanups + * Tigran Aivazian : Restructured wdtpci_init_one() to handle + * failures + * Joel Becker : Added WDIOC_GET/SETTIMEOUT + * Zwane Mwaikambo : Magic char closing, locking changes, + * cleanups * Matt Domsch : nowayout module option */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/interrupt.h> #include <linux/module.h> #include <linux/moduleparam.h> @@ -42,42 +46,26 @@ #include <linux/miscdevice.h> #include <linux/watchdog.h> #include <linux/ioport.h> +#include <linux/delay.h> #include <linux/notifier.h> #include <linux/reboot.h> -#include <linux/init.h> #include <linux/fs.h> #include <linux/pci.h> +#include <linux/io.h> +#include <linux/uaccess.h> -#include <asm/io.h> -#include <asm/uaccess.h> -#include <asm/system.h> #define WDT_IS_PCI #include "wd501p.h" -#define PFX "wdt_pci: " - -/* - * Until Access I/O gets their application for a PCI vendor ID approved, - * I don't think that it's appropriate to move these constants into the - * regular pci_ids.h file. -- JPN 2000/01/18 - */ - -#ifndef PCI_VENDOR_ID_ACCESSIO -#define PCI_VENDOR_ID_ACCESSIO 0x494f -#endif -#ifndef PCI_DEVICE_ID_WDG_CSM -#define PCI_DEVICE_ID_WDG_CSM 0x22c0 -#endif - /* We can only use 1 card due to the /dev/watchdog restriction */ static int dev_count; -static struct semaphore open_sem; +static unsigned long open_lock; static DEFINE_SPINLOCK(wdtpci_lock); static char expect_close; -static int io; +static resource_size_t io; static int irq; /* Default timeout */ @@ -86,19 +74,26 @@ static int irq; static int heartbeat = WD_TIMO; static int wd_heartbeat; module_param(heartbeat, int, 0); -MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (0<heartbeat<65536, default=" __MODULE_STRING(WD_TIMO) ")"); +MODULE_PARM_DESC(heartbeat, + "Watchdog heartbeat in seconds. (0<heartbeat<65536, default=" + __MODULE_STRING(WD_TIMO) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); -#ifdef CONFIG_WDT_501_PCI /* Support for the Fan Tachometer on the PCI-WDT501 */ static int tachometer; - module_param(tachometer, int, 0); -MODULE_PARM_DESC(tachometer, "PCI-WDT501 Fan Tachometer support (0=disable, default=0)"); -#endif /* CONFIG_WDT_501_PCI */ +MODULE_PARM_DESC(tachometer, + "PCI-WDT501 Fan Tachometer support (0=disable, default=0)"); + +static int type = 500; +module_param(type, int, 0); +MODULE_PARM_DESC(type, + "PCI-WDT501 Card type (500 or 501 , default=500)"); /* * Programming support @@ -106,16 +101,19 @@ MODULE_PARM_DESC(tachometer, "PCI-WDT501 Fan Tachometer support (0=disable, defa static void wdtpci_ctr_mode(int ctr, int mode) { - ctr<<=6; - ctr|=0x30; - ctr|=(mode<<1); - outb_p(ctr, WDT_CR); + ctr <<= 6; + ctr |= 0x30; + ctr |= (mode << 1); + outb(ctr, WDT_CR); + udelay(8); } static void wdtpci_ctr_load(int ctr, int val) { - outb_p(val&0xFF, WDT_COUNT0+ctr); - outb_p(val>>8, WDT_COUNT0+ctr); + outb(val & 0xFF, WDT_COUNT0 + ctr); + udelay(8); + outb(val >> 8, WDT_COUNT0 + ctr); + udelay(8); } /** @@ -134,23 +132,35 @@ static int wdtpci_start(void) * "pet" the watchdog, as Access says. * This resets the clock outputs. */ - inb_p(WDT_DC); /* Disable watchdog */ - wdtpci_ctr_mode(2,0); /* Program CTR2 for Mode 0: Pulse on Terminal Count */ - outb_p(0, WDT_DC); /* Enable watchdog */ - - inb_p(WDT_DC); /* Disable watchdog */ - outb_p(0, WDT_CLOCK); /* 2.0833MHz clock */ - inb_p(WDT_BUZZER); /* disable */ - inb_p(WDT_OPTONOTRST); /* disable */ - inb_p(WDT_OPTORST); /* disable */ - inb_p(WDT_PROGOUT); /* disable */ - wdtpci_ctr_mode(0,3); /* Program CTR0 for Mode 3: Square Wave Generator */ - wdtpci_ctr_mode(1,2); /* Program CTR1 for Mode 2: Rate Generator */ - wdtpci_ctr_mode(2,1); /* Program CTR2 for Mode 1: Retriggerable One-Shot */ - wdtpci_ctr_load(0,20833); /* count at 100Hz */ - wdtpci_ctr_load(1,wd_heartbeat);/* Heartbeat */ + inb(WDT_DC); /* Disable watchdog */ + udelay(8); + wdtpci_ctr_mode(2, 0); /* Program CTR2 for Mode 0: + Pulse on Terminal Count */ + outb(0, WDT_DC); /* Enable watchdog */ + udelay(8); + inb(WDT_DC); /* Disable watchdog */ + udelay(8); + outb(0, WDT_CLOCK); /* 2.0833MHz clock */ + udelay(8); + inb(WDT_BUZZER); /* disable */ + udelay(8); + inb(WDT_OPTONOTRST); /* disable */ + udelay(8); + inb(WDT_OPTORST); /* disable */ + udelay(8); + inb(WDT_PROGOUT); /* disable */ + udelay(8); + wdtpci_ctr_mode(0, 3); /* Program CTR0 for Mode 3: + Square Wave Generator */ + wdtpci_ctr_mode(1, 2); /* Program CTR1 for Mode 2: + Rate Generator */ + wdtpci_ctr_mode(2, 1); /* Program CTR2 for Mode 1: + Retriggerable One-Shot */ + wdtpci_ctr_load(0, 20833); /* count at 100Hz */ + wdtpci_ctr_load(1, wd_heartbeat);/* Heartbeat */ /* DO NOT LOAD CTR2 on PCI card! -- JPN */ - outb_p(0, WDT_DC); /* Enable watchdog */ + outb(0, WDT_DC); /* Enable watchdog */ + udelay(8); spin_unlock_irqrestore(&wdtpci_lock, flags); return 0; @@ -162,14 +172,15 @@ static int wdtpci_start(void) * Stop the watchdog driver. */ -static int wdtpci_stop (void) +static int wdtpci_stop(void) { unsigned long flags; /* Turn the card off */ spin_lock_irqsave(&wdtpci_lock, flags); - inb_p(WDT_DC); /* Disable watchdog */ - wdtpci_ctr_load(2,0); /* 0 length reset pulses now */ + inb(WDT_DC); /* Disable watchdog */ + udelay(8); + wdtpci_ctr_load(2, 0); /* 0 length reset pulses now */ spin_unlock_irqrestore(&wdtpci_lock, flags); return 0; } @@ -177,20 +188,23 @@ static int wdtpci_stop (void) /** * wdtpci_ping: * - * Reload counter one with the watchdog heartbeat. We don't bother reloading - * the cascade counter. + * Reload counter one with the watchdog heartbeat. We don't bother + * reloading the cascade counter. */ static int wdtpci_ping(void) { unsigned long flags; - /* Write a watchdog value */ spin_lock_irqsave(&wdtpci_lock, flags); - inb_p(WDT_DC); /* Disable watchdog */ - wdtpci_ctr_mode(1,2); /* Re-Program CTR1 for Mode 2: Rate Generator */ - wdtpci_ctr_load(1,wd_heartbeat);/* Heartbeat */ - outb_p(0, WDT_DC); /* Enable watchdog */ + /* Write a watchdog value */ + inb(WDT_DC); /* Disable watchdog */ + udelay(8); + wdtpci_ctr_mode(1, 2); /* Re-Program CTR1 for Mode 2: + Rate Generator */ + wdtpci_ctr_load(1, wd_heartbeat);/* Heartbeat */ + outb(0, WDT_DC); /* Enable watchdog */ + udelay(8); spin_unlock_irqrestore(&wdtpci_lock, flags); return 0; } @@ -199,14 +213,14 @@ static int wdtpci_ping(void) * wdtpci_set_heartbeat: * @t: the new heartbeat value that needs to be set. * - * Set a new heartbeat value for the watchdog device. If the heartbeat value is - * incorrect we keep the old value and return -EINVAL. If successfull we - * return 0. + * Set a new heartbeat value for the watchdog device. If the heartbeat + * value is incorrect we keep the old value and return -EINVAL. + * If successful we return 0. */ static int wdtpci_set_heartbeat(int t) { /* Arbitrary, can't find the card's limits */ - if ((t < 1) || (t > 65535)) + if (t < 1 || t > 65535) return -EINVAL; heartbeat = t; @@ -227,29 +241,33 @@ static int wdtpci_set_heartbeat(int t) static int wdtpci_get_status(int *status) { - unsigned char new_status=inb_p(WDT_SR); + unsigned char new_status; + unsigned long flags; - *status=0; + spin_lock_irqsave(&wdtpci_lock, flags); + new_status = inb(WDT_SR); + spin_unlock_irqrestore(&wdtpci_lock, flags); + + *status = 0; if (new_status & WDC_SR_ISOI0) *status |= WDIOF_EXTERN1; if (new_status & WDC_SR_ISII1) *status |= WDIOF_EXTERN2; -#ifdef CONFIG_WDT_501_PCI - if (!(new_status & WDC_SR_TGOOD)) - *status |= WDIOF_OVERHEAT; - if (!(new_status & WDC_SR_PSUOVER)) - *status |= WDIOF_POWEROVER; - if (!(new_status & WDC_SR_PSUUNDR)) - *status |= WDIOF_POWERUNDER; - if (tachometer) { - if (!(new_status & WDC_SR_FANGOOD)) - *status |= WDIOF_FANFAULT; + if (type == 501) { + if (!(new_status & WDC_SR_TGOOD)) + *status |= WDIOF_OVERHEAT; + if (!(new_status & WDC_SR_PSUOVER)) + *status |= WDIOF_POWEROVER; + if (!(new_status & WDC_SR_PSUUNDR)) + *status |= WDIOF_POWERUNDER; + if (tachometer) { + if (!(new_status & WDC_SR_FANGOOD)) + *status |= WDIOF_FANFAULT; + } } -#endif /* CONFIG_WDT_501_PCI */ return 0; } -#ifdef CONFIG_WDT_501_PCI /** * wdtpci_get_temperature: * @@ -259,12 +277,15 @@ static int wdtpci_get_status(int *status) static int wdtpci_get_temperature(int *temperature) { - unsigned short c=inb_p(WDT_RT); - + unsigned short c; + unsigned long flags; + spin_lock_irqsave(&wdtpci_lock, flags); + c = inb(WDT_RT); + udelay(8); + spin_unlock_irqrestore(&wdtpci_lock, flags); *temperature = (c * 11 / 15) + 7; return 0; } -#endif /* CONFIG_WDT_501_PCI */ /** * wdtpci_interrupt: @@ -282,34 +303,42 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id) * Read the status register see what is up and * then printk it. */ - unsigned char status=inb_p(WDT_SR); - - printk(KERN_CRIT PFX "status %d\n", status); - -#ifdef CONFIG_WDT_501_PCI - if (!(status & WDC_SR_TGOOD)) - printk(KERN_CRIT PFX "Overheat alarm.(%d)\n",inb_p(WDT_RT)); - if (!(status & WDC_SR_PSUOVER)) - printk(KERN_CRIT PFX "PSU over voltage.\n"); - if (!(status & WDC_SR_PSUUNDR)) - printk(KERN_CRIT PFX "PSU under voltage.\n"); - if (tachometer) { - if (!(status & WDC_SR_FANGOOD)) - printk(KERN_CRIT PFX "Possible fan fault.\n"); + unsigned char status; + + spin_lock(&wdtpci_lock); + + status = inb(WDT_SR); + udelay(8); + + pr_crit("status %d\n", status); + + if (type == 501) { + if (!(status & WDC_SR_TGOOD)) { + pr_crit("Overheat alarm (%d)\n", inb(WDT_RT)); + udelay(8); + } + if (!(status & WDC_SR_PSUOVER)) + pr_crit("PSU over voltage\n"); + if (!(status & WDC_SR_PSUUNDR)) + pr_crit("PSU under voltage\n"); + if (tachometer) { + if (!(status & WDC_SR_FANGOOD)) + pr_crit("Possible fan fault\n"); + } } -#endif /* CONFIG_WDT_501_PCI */ - if (!(status&WDC_SR_WCCR)) { + if (!(status & WDC_SR_WCCR)) { #ifdef SOFTWARE_REBOOT #ifdef ONLY_TESTING - printk(KERN_CRIT PFX "Would Reboot.\n"); + pr_crit("Would Reboot\n"); #else - printk(KERN_CRIT PFX "Initiating system reboot.\n"); + pr_crit("Initiating system reboot\n"); emergency_restart(NULL); #endif #else - printk(KERN_CRIT PFX "Reset in 5ms.\n"); + pr_crit("Reset in 5ms\n"); #endif } + spin_unlock(&wdtpci_lock); return IRQ_HANDLED; } @@ -325,17 +354,19 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id) * write of data will do, as we we don't define content meaning. */ -static ssize_t wdtpci_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) +static ssize_t wdtpci_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { if (count) { if (!nowayout) { size_t i; + /* In case it was set long ago */ expect_close = 0; for (i = 0; i != count; i++) { char c; - if(get_user(c, buf+i)) + if (get_user(c, buf + i)) return -EFAULT; if (c == 'V') expect_close = 42; @@ -343,13 +374,11 @@ static ssize_t wdtpci_write(struct file *file, const char __user *buf, size_t co } wdtpci_ping(); } - return count; } /** * wdtpci_ioctl: - * @inode: inode of the device * @file: file handle to the device * @cmd: watchdog command * @arg: argument pointer @@ -359,15 +388,15 @@ static ssize_t wdtpci_write(struct file *file, const char __user *buf, size_t co * querying capabilities and current status. */ -static int wdtpci_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long wdtpci_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { - int new_heartbeat; - int status; void __user *argp = (void __user *)arg; int __user *p = argp; + int new_heartbeat; + int status; - static struct watchdog_info ident = { + struct watchdog_info ident = { .options = WDIOF_SETTIMEOUT| WDIOF_MAGICCLOSE| WDIOF_KEEPALIVEPING, @@ -377,38 +406,35 @@ static int wdtpci_ioctl(struct inode *inode, struct file *file, unsigned int cmd /* Add options according to the card we have */ ident.options |= (WDIOF_EXTERN1|WDIOF_EXTERN2); -#ifdef CONFIG_WDT_501_PCI - ident.options |= (WDIOF_OVERHEAT|WDIOF_POWERUNDER|WDIOF_POWEROVER); - if (tachometer) - ident.options |= WDIOF_FANFAULT; -#endif /* CONFIG_WDT_501_PCI */ + if (type == 501) { + ident.options |= (WDIOF_OVERHEAT|WDIOF_POWERUNDER| + WDIOF_POWEROVER); + if (tachometer) + ident.options |= WDIOF_FANFAULT; + } - switch(cmd) - { - default: - return -ENOTTY; - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0; - - case WDIOC_GETSTATUS: - wdtpci_get_status(&status); - return put_user(status, p); - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - case WDIOC_KEEPALIVE: - wdtpci_ping(); - return 0; - case WDIOC_SETTIMEOUT: - if (get_user(new_heartbeat, p)) - return -EFAULT; - - if (wdtpci_set_heartbeat(new_heartbeat)) - return -EINVAL; - - wdtpci_ping(); - /* Fall */ - case WDIOC_GETTIMEOUT: - return put_user(heartbeat, p); + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + wdtpci_get_status(&status); + return put_user(status, p); + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + wdtpci_ping(); + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_heartbeat, p)) + return -EFAULT; + if (wdtpci_set_heartbeat(new_heartbeat)) + return -EINVAL; + wdtpci_ping(); + /* Fall */ + case WDIOC_GETTIMEOUT: + return put_user(heartbeat, p); + default: + return -ENOTTY; } } @@ -426,12 +452,11 @@ static int wdtpci_ioctl(struct inode *inode, struct file *file, unsigned int cmd static int wdtpci_open(struct inode *inode, struct file *file) { - if (down_trylock(&open_sem)) + if (test_and_set_bit(0, &open_lock)) return -EBUSY; - if (nowayout) { + if (nowayout) __module_get(THIS_MODULE); - } /* * Activate */ @@ -456,15 +481,14 @@ static int wdtpci_release(struct inode *inode, struct file *file) if (expect_close == 42) { wdtpci_stop(); } else { - printk(KERN_CRIT PFX "Unexpected close, not stopping timer!"); + pr_crit("Unexpected close, not stopping timer!\n"); wdtpci_ping(); } expect_close = 0; - up(&open_sem); + clear_bit(0, &open_lock); return 0; } -#ifdef CONFIG_WDT_501_PCI /** * wdtpci_temp_read: * @file: file handle to the watchdog board @@ -476,14 +500,15 @@ static int wdtpci_release(struct inode *inode, struct file *file) * fahrenheit. It was designed by an imperial measurement luddite. */ -static ssize_t wdtpci_temp_read(struct file *file, char __user *buf, size_t count, loff_t *ptr) +static ssize_t wdtpci_temp_read(struct file *file, char __user *buf, + size_t count, loff_t *ptr) { int temperature; if (wdtpci_get_temperature(&temperature)) return -EFAULT; - if (copy_to_user (buf, &temperature, 1)) + if (copy_to_user(buf, &temperature, 1)) return -EFAULT; return 1; @@ -514,7 +539,6 @@ static int wdtpci_temp_release(struct inode *inode, struct file *file) { return 0; } -#endif /* CONFIG_WDT_501_PCI */ /** * notify_sys: @@ -529,12 +553,10 @@ static int wdtpci_temp_release(struct inode *inode, struct file *file) */ static int wdtpci_notify_sys(struct notifier_block *this, unsigned long code, - void *unused) + void *unused) { - if (code==SYS_DOWN || code==SYS_HALT) { - /* Turn the card off */ + if (code == SYS_DOWN || code == SYS_HALT) wdtpci_stop(); - } return NOTIFY_DONE; } @@ -547,7 +569,7 @@ static const struct file_operations wdtpci_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = wdtpci_write, - .ioctl = wdtpci_ioctl, + .unlocked_ioctl = wdtpci_ioctl, .open = wdtpci_open, .release = wdtpci_release, }; @@ -558,7 +580,6 @@ static struct miscdevice wdtpci_miscdev = { .fops = &wdtpci_fops, }; -#ifdef CONFIG_WDT_501_PCI static const struct file_operations wdtpci_temp_fops = { .owner = THIS_MODULE, .llseek = no_llseek, @@ -572,7 +593,6 @@ static struct miscdevice temp_miscdev = { .name = "temperature", .fops = &wdtpci_temp_fops, }; -#endif /* CONFIG_WDT_501_PCI */ /* * The WDT card needs to learn about soft shutdowns in order to @@ -584,122 +604,125 @@ static struct notifier_block wdtpci_notifier = { }; -static int __devinit wdtpci_init_one (struct pci_dev *dev, - const struct pci_device_id *ent) +static int wdtpci_init_one(struct pci_dev *dev, + const struct pci_device_id *ent) { int ret = -EIO; dev_count++; if (dev_count > 1) { - printk (KERN_ERR PFX "this driver only supports 1 device\n"); + pr_err("This driver only supports one device\n"); + return -ENODEV; + } + + if (type != 500 && type != 501) { + pr_err("unknown card type '%d'\n", type); return -ENODEV; } - if (pci_enable_device (dev)) { - printk (KERN_ERR PFX "Not possible to enable PCI Device\n"); + if (pci_enable_device(dev)) { + pr_err("Not possible to enable PCI Device\n"); return -ENODEV; } - if (pci_resource_start (dev, 2) == 0x0000) { - printk (KERN_ERR PFX "No I/O-Address for card detected\n"); + if (pci_resource_start(dev, 2) == 0x0000) { + pr_err("No I/O-Address for card detected\n"); ret = -ENODEV; goto out_pci; } - sema_init(&open_sem, 1); - - irq = dev->irq; - io = pci_resource_start (dev, 2); - - if (request_region (io, 16, "wdt_pci") == NULL) { - printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", io); + if (pci_request_region(dev, 2, "wdt_pci")) { + pr_err("I/O address 0x%llx already in use\n", + (unsigned long long)pci_resource_start(dev, 2)); goto out_pci; } - if (request_irq (irq, wdtpci_interrupt, IRQF_DISABLED | IRQF_SHARED, + irq = dev->irq; + io = pci_resource_start(dev, 2); + + if (request_irq(irq, wdtpci_interrupt, IRQF_SHARED, "wdt_pci", &wdtpci_miscdev)) { - printk (KERN_ERR PFX "IRQ %d is not free\n", irq); + pr_err("IRQ %d is not free\n", irq); goto out_reg; } - printk ("PCI-WDT500/501 (PCI-WDG-CSM) driver 0.10 at 0x%04x (Interrupt %d)\n", - io, irq); + pr_info("PCI-WDT500/501 (PCI-WDG-CSM) driver 0.10 at 0x%llx (Interrupt %d)\n", + (unsigned long long)io, irq); - /* Check that the heartbeat value is within it's range ; if not reset to the default */ + /* Check that the heartbeat value is within its range; + if not reset to the default */ if (wdtpci_set_heartbeat(heartbeat)) { wdtpci_set_heartbeat(WD_TIMO); - printk(KERN_INFO PFX "heartbeat value must be 0<heartbeat<65536, using %d\n", + pr_info("heartbeat value must be 0 < heartbeat < 65536, using %d\n", WD_TIMO); } - ret = register_reboot_notifier (&wdtpci_notifier); + ret = register_reboot_notifier(&wdtpci_notifier); if (ret) { - printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", ret); + pr_err("cannot register reboot notifier (err=%d)\n", ret); goto out_irq; } -#ifdef CONFIG_WDT_501_PCI - ret = misc_register (&temp_miscdev); - if (ret) { - printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - TEMP_MINOR, ret); - goto out_rbt; + if (type == 501) { + ret = misc_register(&temp_miscdev); + if (ret) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + TEMP_MINOR, ret); + goto out_rbt; + } } -#endif /* CONFIG_WDT_501_PCI */ - ret = misc_register (&wdtpci_miscdev); + ret = misc_register(&wdtpci_miscdev); if (ret) { - printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto out_misc; } - printk(KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n", + pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n", heartbeat, nowayout); -#ifdef CONFIG_WDT_501_PCI - printk(KERN_INFO "wdt: Fan Tachometer is %s\n", (tachometer ? "Enabled" : "Disabled")); -#endif /* CONFIG_WDT_501_PCI */ + if (type == 501) + pr_info("Fan Tachometer is %s\n", + tachometer ? "Enabled" : "Disabled"); ret = 0; out: return ret; out_misc: -#ifdef CONFIG_WDT_501_PCI - misc_deregister(&temp_miscdev); + if (type == 501) + misc_deregister(&temp_miscdev); out_rbt: -#endif /* CONFIG_WDT_501_PCI */ unregister_reboot_notifier(&wdtpci_notifier); out_irq: free_irq(irq, &wdtpci_miscdev); out_reg: - release_region (io, 16); + pci_release_region(dev, 2); out_pci: pci_disable_device(dev); goto out; } -static void __devexit wdtpci_remove_one (struct pci_dev *pdev) +static void wdtpci_remove_one(struct pci_dev *pdev) { /* here we assume only one device will ever have * been picked up and registered by probe function */ misc_deregister(&wdtpci_miscdev); -#ifdef CONFIG_WDT_501_PCI - misc_deregister(&temp_miscdev); -#endif /* CONFIG_WDT_501_PCI */ + if (type == 501) + misc_deregister(&temp_miscdev); unregister_reboot_notifier(&wdtpci_notifier); free_irq(irq, &wdtpci_miscdev); - release_region(io, 16); + pci_release_region(pdev, 2); pci_disable_device(pdev); dev_count--; } -static struct pci_device_id wdtpci_pci_tbl[] = { +static const struct pci_device_id wdtpci_pci_tbl[] = { { .vendor = PCI_VENDOR_ID_ACCESSIO, - .device = PCI_DEVICE_ID_WDG_CSM, + .device = PCI_DEVICE_ID_ACCESSIO_WDG_CSM, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, }, @@ -712,45 +735,11 @@ static struct pci_driver wdtpci_driver = { .name = "wdt_pci", .id_table = wdtpci_pci_tbl, .probe = wdtpci_init_one, - .remove = __devexit_p(wdtpci_remove_one), + .remove = wdtpci_remove_one, }; - -/** - * wdtpci_cleanup: - * - * Unload the watchdog. You cannot do this with any file handles open. - * If your watchdog is set to continue ticking on close and you unload - * it, well it keeps ticking. We won't get the interrupt but the board - * will not touch PC memory so all is fine. You just have to load a new - * module in xx seconds or reboot. - */ - -static void __exit wdtpci_cleanup(void) -{ - pci_unregister_driver (&wdtpci_driver); -} - - -/** - * wdtpci_init: - * - * Set up the WDT watchdog board. All we have to do is grab the - * resources we require and bitch if anyone beat us to them. - * The open() function will actually kick the board off. - */ - -static int __init wdtpci_init(void) -{ - return pci_register_driver (&wdtpci_driver); -} - - -module_init(wdtpci_init); -module_exit(wdtpci_cleanup); +module_pci_driver(wdtpci_driver); MODULE_AUTHOR("JP Nollmann, Alan Cox"); MODULE_DESCRIPTION("Driver for the ICS PCI-WDT500/501 watchdog cards"); MODULE_LICENSE("GPL"); -MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -MODULE_ALIAS_MISCDEV(TEMP_MINOR); |