aboutsummaryrefslogtreecommitdiff
path: root/drivers/watchdog/f71808e_wdt.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/watchdog/f71808e_wdt.c')
-rw-r--r--drivers/watchdog/f71808e_wdt.c120
1 files changed, 82 insertions, 38 deletions
diff --git a/drivers/watchdog/f71808e_wdt.c b/drivers/watchdog/f71808e_wdt.c
index 65e579635db..016bd935519 100644
--- a/drivers/watchdog/f71808e_wdt.c
+++ b/drivers/watchdog/f71808e_wdt.c
@@ -19,6 +19,8 @@
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
***************************************************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/err.h>
#include <linux/fs.h>
#include <linux/init.h>
@@ -42,18 +44,22 @@
#define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */
#define SIO_REG_DEVREV 0x22 /* Device revision */
#define SIO_REG_MANID 0x23 /* Fintek ID (2 bytes) */
+#define SIO_REG_ROM_ADDR_SEL 0x27 /* ROM address select */
+#define SIO_REG_MFUNCT1 0x29 /* Multi function select 1 */
+#define SIO_REG_MFUNCT2 0x2a /* Multi function select 2 */
+#define SIO_REG_MFUNCT3 0x2b /* Multi function select 3 */
#define SIO_REG_ENABLE 0x30 /* Logical device enable */
#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */
#define SIO_FINTEK_ID 0x1934 /* Manufacturers ID */
-#define SIO_F71808_ID 0x0901 /* Chipset ID */
-#define SIO_F71858_ID 0x0507 /* Chipset ID */
+#define SIO_F71808_ID 0x0901 /* Chipset ID */
+#define SIO_F71858_ID 0x0507 /* Chipset ID */
#define SIO_F71862_ID 0x0601 /* Chipset ID */
+#define SIO_F71869_ID 0x0814 /* Chipset ID */
+#define SIO_F71869A_ID 0x1007 /* Chipset ID */
#define SIO_F71882_ID 0x0541 /* Chipset ID */
#define SIO_F71889_ID 0x0723 /* Chipset ID */
-#define F71882FG_REG_START 0x01
-
#define F71808FG_REG_WDO_CONF 0xf0
#define F71808FG_REG_WDT_CONF 0xf5
#define F71808FG_REG_WD_TIME 0xf6
@@ -70,13 +76,15 @@
#define WATCHDOG_MAX_TIMEOUT (60 * 255)
#define WATCHDOG_PULSE_WIDTH 125 /* 125 ms, default pulse width for
watchdog signal */
+#define WATCHDOG_F71862FG_PIN 63 /* default watchdog reset output
+ pin number 63 */
static unsigned short force_id;
module_param(force_id, ushort, 0);
MODULE_PARM_DESC(force_id, "Override the detected device ID");
static const int max_timeout = WATCHDOG_MAX_TIMEOUT;
-static int timeout = 60; /* default timeout in seconds */
+static int timeout = WATCHDOG_TIMEOUT; /* default timeout in seconds */
module_param(timeout, int, 0);
MODULE_PARM_DESC(timeout,
"Watchdog timeout in seconds. 1<= timeout <="
@@ -89,7 +97,13 @@ MODULE_PARM_DESC(pulse_width,
"Watchdog signal pulse width. 0(=level), 1 ms, 25 ms, 125 ms or 5000 ms"
" (default=" __MODULE_STRING(WATCHDOG_PULSE_WIDTH) ")");
-static int nowayout = WATCHDOG_NOWAYOUT;
+static unsigned int f71862fg_pin = WATCHDOG_F71862FG_PIN;
+module_param(f71862fg_pin, uint, 0);
+MODULE_PARM_DESC(f71862fg_pin,
+ "Watchdog f71862fg reset output pin configuration. Choose pin 56 or 63"
+ " (default=" __MODULE_STRING(WATCHDOG_F71862FG_PIN)")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, bool, 0444);
MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close");
@@ -98,12 +112,13 @@ module_param(start_withtimeout, uint, 0);
MODULE_PARM_DESC(start_withtimeout, "Start watchdog timer on module load with"
" given initial timeout. Zero (default) disables this feature.");
-enum chips { f71808fg, f71858fg, f71862fg, f71882fg, f71889fg };
+enum chips { f71808fg, f71858fg, f71862fg, f71869, f71882fg, f71889fg };
static const char *f71808e_names[] = {
"f71808fg",
"f71858fg",
"f71862fg",
+ "f71869",
"f71882fg",
"f71889fg",
};
@@ -177,12 +192,11 @@ static inline int superio_enter(int base)
{
/* Don't step on other drivers' I/O space by accident */
if (!request_muxed_region(base, 2, DRVNAME)) {
- printk(KERN_ERR DRVNAME ": I/O address 0x%04x already in use\n",
- (int)base);
+ pr_err("I/O address 0x%04x already in use\n", (int)base);
return -EBUSY;
}
- /* according to the datasheet the key must be send twice! */
+ /* according to the datasheet the key must be sent twice! */
outb(SIO_UNLOCK_KEY, base);
outb(SIO_UNLOCK_KEY, base);
@@ -205,7 +219,7 @@ static int watchdog_set_timeout(int timeout)
{
if (timeout <= 0
|| timeout > max_timeout) {
- printk(KERN_ERR DRVNAME ": watchdog timeout out of range\n");
+ pr_err("watchdog timeout out of range\n");
return -EINVAL;
}
@@ -240,7 +254,7 @@ static int watchdog_set_pulse_width(unsigned int pw)
} else if (pw <= 5000) {
watchdog.pulse_val = 3;
} else {
- printk(KERN_ERR DRVNAME ": pulse width out of range\n");
+ pr_err("pulse width out of range\n");
err = -EINVAL;
goto exit_unlock;
}
@@ -282,6 +296,27 @@ exit_unlock:
return err;
}
+static int f71862fg_pin_configure(unsigned short ioaddr)
+{
+ /* When ioaddr is non-zero the calling function has to take care of
+ mutex handling and superio preparation! */
+
+ if (f71862fg_pin == 63) {
+ if (ioaddr) {
+ /* SPI must be disabled first to use this pin! */
+ superio_clear_bit(ioaddr, SIO_REG_ROM_ADDR_SEL, 6);
+ superio_set_bit(ioaddr, SIO_REG_MFUNCT3, 4);
+ }
+ } else if (f71862fg_pin == 56) {
+ if (ioaddr)
+ superio_set_bit(ioaddr, SIO_REG_MFUNCT1, 1);
+ } else {
+ pr_err("Invalid argument f71862fg_pin=%d\n", f71862fg_pin);
+ return -EINVAL;
+ }
+ return 0;
+}
+
static int watchdog_start(void)
{
/* Make sure we don't die as soon as the watchdog is enabled below */
@@ -299,19 +334,30 @@ static int watchdog_start(void)
switch (watchdog.type) {
case f71808fg:
/* Set pin 21 to GPIO23/WDTRST#, then to WDTRST# */
- superio_clear_bit(watchdog.sioaddr, 0x2a, 3);
- superio_clear_bit(watchdog.sioaddr, 0x2b, 3);
+ superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT2, 3);
+ superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT3, 3);
+ break;
+
+ case f71862fg:
+ err = f71862fg_pin_configure(watchdog.sioaddr);
+ if (err)
+ goto exit_superio;
+ break;
+
+ case f71869:
+ /* GPIO14 --> WDTRST# */
+ superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT1, 4);
break;
case f71882fg:
/* Set pin 56 to WDTRST# */
- superio_set_bit(watchdog.sioaddr, 0x29, 1);
+ superio_set_bit(watchdog.sioaddr, SIO_REG_MFUNCT1, 1);
break;
case f71889fg:
/* set pin 40 to WDTRST# */
- superio_outb(watchdog.sioaddr, 0x2b,
- superio_inb(watchdog.sioaddr, 0x2b) & 0xcf);
+ superio_outb(watchdog.sioaddr, SIO_REG_MFUNCT3,
+ superio_inb(watchdog.sioaddr, SIO_REG_MFUNCT3) & 0xcf);
break;
default:
@@ -442,8 +488,7 @@ static int watchdog_release(struct inode *inode, struct file *file)
if (!watchdog.expect_close) {
watchdog_keepalive();
- printk(KERN_CRIT DRVNAME
- ": Unexpected close, not stopping watchdog!\n");
+ pr_crit("Unexpected close, not stopping watchdog!\n");
} else if (!nowayout) {
watchdog_stop();
}
@@ -627,25 +672,22 @@ static int __init watchdog_init(int sioaddr)
err = misc_register(&watchdog_miscdev);
if (err) {
- printk(KERN_ERR DRVNAME
- ": cannot register miscdev on minor=%d\n",
- watchdog_miscdev.minor);
+ pr_err("cannot register miscdev on minor=%d\n",
+ watchdog_miscdev.minor);
goto exit_reboot;
}
if (start_withtimeout) {
if (start_withtimeout <= 0
|| start_withtimeout > max_timeout) {
- printk(KERN_ERR DRVNAME
- ": starting timeout out of range\n");
+ pr_err("starting timeout out of range\n");
err = -EINVAL;
goto exit_miscdev;
}
err = watchdog_start();
if (err) {
- printk(KERN_ERR DRVNAME
- ": cannot start watchdog timer\n");
+ pr_err("cannot start watchdog timer\n");
goto exit_miscdev;
}
@@ -675,8 +717,7 @@ static int __init watchdog_init(int sioaddr)
if (nowayout)
__module_get(THIS_MODULE);
- printk(KERN_INFO DRVNAME
- ": watchdog started with initial timeout of %u sec\n",
+ pr_info("watchdog started with initial timeout of %u sec\n",
start_withtimeout);
}
@@ -701,7 +742,7 @@ static int __init f71808e_find(int sioaddr)
devid = superio_inw(sioaddr, SIO_REG_MANID);
if (devid != SIO_FINTEK_ID) {
- pr_debug(DRVNAME ": Not a Fintek device\n");
+ pr_debug("Not a Fintek device\n");
err = -ENODEV;
goto exit;
}
@@ -711,28 +752,32 @@ static int __init f71808e_find(int sioaddr)
case SIO_F71808_ID:
watchdog.type = f71808fg;
break;
+ case SIO_F71862_ID:
+ watchdog.type = f71862fg;
+ err = f71862fg_pin_configure(0); /* validate module parameter */
+ break;
+ case SIO_F71869_ID:
+ case SIO_F71869A_ID:
+ watchdog.type = f71869;
+ break;
case SIO_F71882_ID:
watchdog.type = f71882fg;
break;
case SIO_F71889_ID:
watchdog.type = f71889fg;
break;
- case SIO_F71862_ID:
- /* These have a watchdog, though it isn't implemented (yet). */
- err = -ENOSYS;
- goto exit;
case SIO_F71858_ID:
/* Confirmed (by datasheet) not to have a watchdog. */
err = -ENODEV;
goto exit;
default:
- printk(KERN_INFO DRVNAME ": Unrecognized Fintek device: %04x\n",
- (unsigned int)devid);
+ pr_info("Unrecognized Fintek device: %04x\n",
+ (unsigned int)devid);
err = -ENODEV;
goto exit;
}
- printk(KERN_INFO DRVNAME ": Found %s watchdog chip, revision %d\n",
+ pr_info("Found %s watchdog chip, revision %d\n",
f71808e_names[watchdog.type],
(int)superio_inb(sioaddr, SIO_REG_DEVREV));
exit:
@@ -760,8 +805,7 @@ static int __init f71808e_init(void)
static void __exit f71808e_exit(void)
{
if (watchdog_is_running()) {
- printk(KERN_WARNING DRVNAME
- ": Watchdog timer still running, stopping it\n");
+ pr_warn("Watchdog timer still running, stopping it\n");
watchdog_stop();
}
misc_deregister(&watchdog_miscdev);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-21 01:38:47 +0000