diff options
Diffstat (limited to 'drivers/w1/w1_io.c')
| -rw-r--r-- | drivers/w1/w1_io.c | 151 |
1 files changed, 104 insertions, 47 deletions
diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c index 3ebe9726a9e..282092421cc 100644 --- a/drivers/w1/w1_io.c +++ b/drivers/w1/w1_io.c @@ -1,7 +1,7 @@ /* * w1_io.c * - * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru> + * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net> * * * This program is free software; you can redistribute it and/or modify @@ -31,6 +31,9 @@ static int w1_delay_parm = 1; module_param_named(delay_coef, w1_delay_parm, int, 0); +static int w1_disable_irqs = 0; +module_param_named(disable_irqs, w1_disable_irqs, int, 0); + static u8 w1_crc8_table[] = { 0, 94, 188, 226, 97, 63, 221, 131, 194, 156, 126, 32, 163, 253, 31, 65, 157, 195, 33, 127, 252, 162, 64, 30, 95, 1, 227, 189, 62, 96, 130, 220, @@ -59,7 +62,9 @@ static void w1_write_bit(struct w1_master *dev, int bit); static u8 w1_read_bit(struct w1_master *dev); /** - * Generates a write-0 or write-1 cycle and samples the level. + * w1_touch_bit() - Generates a write-0 or write-1 cycle and samples the level. + * @dev: the master device + * @bit: 0 - write a 0, 1 - write a 0 read the level */ static u8 w1_touch_bit(struct w1_master *dev, int bit) { @@ -74,11 +79,18 @@ static u8 w1_touch_bit(struct w1_master *dev, int bit) } /** - * Generates a write-0 or write-1 cycle. + * w1_write_bit() - Generates a write-0 or write-1 cycle. + * @dev: the master device + * @bit: bit to write + * * Only call if dev->bus_master->touch_bit is NULL */ static void w1_write_bit(struct w1_master *dev, int bit) { + unsigned long flags = 0; + + if(w1_disable_irqs) local_irq_save(flags); + if (bit) { dev->bus_master->write_bit(dev->bus_master->data, 0); w1_delay(6); @@ -90,14 +102,17 @@ static void w1_write_bit(struct w1_master *dev, int bit) dev->bus_master->write_bit(dev->bus_master->data, 1); w1_delay(10); } + + if(w1_disable_irqs) local_irq_restore(flags); } /** + * w1_pre_write() - pre-write operations + * @dev: the master device + * * Pre-write operation, currently only supporting strong pullups. * Program the hardware for a strong pullup, if one has been requested and * the hardware supports it. - * - * @param dev the master device */ static void w1_pre_write(struct w1_master *dev) { @@ -109,11 +124,12 @@ static void w1_pre_write(struct w1_master *dev) } /** + * w1_post_write() - post-write options + * @dev: the master device + * * Post-write operation, currently only supporting strong pullups. * If a strong pullup was requested, clear it if the hardware supports * them, or execute the delay otherwise, in either case clear the request. - * - * @param dev the master device */ static void w1_post_write(struct w1_master *dev) { @@ -127,10 +143,9 @@ static void w1_post_write(struct w1_master *dev) } /** - * Writes 8 bits. - * - * @param dev the master device - * @param byte the byte to write + * w1_write_8() - Writes 8 bits. + * @dev: the master device + * @byte: the byte to write */ void w1_write_8(struct w1_master *dev, u8 byte) { @@ -152,35 +167,43 @@ EXPORT_SYMBOL_GPL(w1_write_8); /** - * Generates a write-1 cycle and samples the level. + * w1_read_bit() - Generates a write-1 cycle and samples the level. + * @dev: the master device + * * Only call if dev->bus_master->touch_bit is NULL */ static u8 w1_read_bit(struct w1_master *dev) { int result; + unsigned long flags = 0; + /* sample timing is critical here */ + local_irq_save(flags); dev->bus_master->write_bit(dev->bus_master->data, 0); w1_delay(6); dev->bus_master->write_bit(dev->bus_master->data, 1); w1_delay(9); result = dev->bus_master->read_bit(dev->bus_master->data); + local_irq_restore(flags); + w1_delay(55); return result & 0x1; } /** - * Does a triplet - used for searching ROM addresses. + * w1_triplet() - * Does a triplet - used for searching ROM addresses. + * @dev: the master device + * @bdir: the bit to write if both id_bit and comp_bit are 0 + * * Return bits: * bit 0 = id_bit * bit 1 = comp_bit * bit 2 = dir_taken * If both bits 0 & 1 are set, the search should be restarted. * - * @param dev the master device - * @param bdir the bit to write if both id_bit and comp_bit are 0 - * @return bit fields - see above + * Return: bit fields - see above */ u8 w1_triplet(struct w1_master *dev, int bdir) { @@ -212,10 +235,10 @@ u8 w1_triplet(struct w1_master *dev, int bdir) } /** - * Reads 8 bits. + * w1_read_8() - Reads 8 bits. + * @dev: the master device * - * @param dev the master device - * @return the byte read + * Return: the byte read */ u8 w1_read_8(struct w1_master *dev) { @@ -233,11 +256,10 @@ u8 w1_read_8(struct w1_master *dev) EXPORT_SYMBOL_GPL(w1_read_8); /** - * Writes a series of bytes. - * - * @param dev the master device - * @param buf pointer to the data to write - * @param len the number of bytes to write + * w1_write_block() - Writes a series of bytes. + * @dev: the master device + * @buf: pointer to the data to write + * @len: the number of bytes to write */ void w1_write_block(struct w1_master *dev, const u8 *buf, int len) { @@ -255,11 +277,10 @@ void w1_write_block(struct w1_master *dev, const u8 *buf, int len) EXPORT_SYMBOL_GPL(w1_write_block); /** - * Touches a series of bytes. - * - * @param dev the master device - * @param buf pointer to the data to write - * @param len the number of bytes to write + * w1_touch_block() - Touches a series of bytes. + * @dev: the master device + * @buf: pointer to the data to write + * @len: the number of bytes to write */ void w1_touch_block(struct w1_master *dev, u8 *buf, int len) { @@ -280,12 +301,11 @@ void w1_touch_block(struct w1_master *dev, u8 *buf, int len) EXPORT_SYMBOL_GPL(w1_touch_block); /** - * Reads a series of bytes. - * - * @param dev the master device - * @param buf pointer to the buffer to fill - * @param len the number of bytes to read - * @return the number of bytes read + * w1_read_block() - Reads a series of bytes. + * @dev: the master device + * @buf: pointer to the buffer to fill + * @len: the number of bytes to read + * Return: the number of bytes read */ u8 w1_read_block(struct w1_master *dev, u8 *buf, int len) { @@ -305,14 +325,16 @@ u8 w1_read_block(struct w1_master *dev, u8 *buf, int len) EXPORT_SYMBOL_GPL(w1_read_block); /** - * Issues a reset bus sequence. - * - * @param dev The bus master pointer - * @return 0=Device present, 1=No device present or error + * w1_reset_bus() - Issues a reset bus sequence. + * @dev: the master device + * Return: 0=Device present, 1=No device present or error */ int w1_reset_bus(struct w1_master *dev) { int result; + unsigned long flags = 0; + + if(w1_disable_irqs) local_irq_save(flags); if (dev->bus_master->reset_bus) result = dev->bus_master->reset_bus(dev->bus_master->data) & 0x1; @@ -325,19 +347,21 @@ int w1_reset_bus(struct w1_master *dev) * cpu for such a short amount of time AND get it back in * the maximum amount of time. */ - w1_delay(480); + w1_delay(500); dev->bus_master->write_bit(dev->bus_master->data, 1); w1_delay(70); result = dev->bus_master->read_bit(dev->bus_master->data) & 0x1; - /* minmum 70 (above) + 410 = 480 us + /* minmum 70 (above) + 430 = 500 us * There aren't any timing requirements between a reset and * the following transactions. Sleeping is safe here. */ - /* w1_delay(410); min required time */ + /* w1_delay(430); min required time */ msleep(1); } + if(w1_disable_irqs) local_irq_restore(flags); + return result; } EXPORT_SYMBOL_GPL(w1_reset_bus); @@ -364,12 +388,15 @@ void w1_search_devices(struct w1_master *dev, u8 search_type, w1_slave_found_cal } /** + * w1_reset_select_slave() - reset and select a slave + * @sl: the slave to select + * * Resets the bus and then selects the slave by sending either a skip rom - * or a rom match. + * or a rom match. A skip rom is issued if there is only one device + * registered on the bus. * The w1 master lock must be held. * - * @param sl the slave to select - * @return 0=success, anything else=error + * Return: 0=success, anything else=error */ int w1_reset_select_slave(struct w1_slave *sl) { @@ -390,6 +417,37 @@ int w1_reset_select_slave(struct w1_slave *sl) EXPORT_SYMBOL_GPL(w1_reset_select_slave); /** + * w1_reset_resume_command() - resume instead of another match ROM + * @dev: the master device + * + * When the workflow with a slave amongst many requires several + * successive commands a reset between each, this function is similar + * to doing a reset then a match ROM for the last matched ROM. The + * advantage being that the matched ROM step is skipped in favor of the + * resume command. The slave must support the command of course. + * + * If the bus has only one slave, traditionnaly the match ROM is skipped + * and a "SKIP ROM" is done for efficiency. On multi-slave busses, this + * doesn't work of course, but the resume command is the next best thing. + * + * The w1 master lock must be held. + */ +int w1_reset_resume_command(struct w1_master *dev) +{ + if (w1_reset_bus(dev)) + return -1; + + /* This will make only the last matched slave perform a skip ROM. */ + w1_write_8(dev, W1_RESUME_CMD); + return 0; +} +EXPORT_SYMBOL_GPL(w1_reset_resume_command); + +/** + * w1_next_pullup() - register for a strong pullup + * @dev: the master device + * @delay: time in milliseconds + * * Put out a strong pull-up of the specified duration after the next write * operation. Not all hardware supports strong pullups. Hardware that * doesn't support strong pullups will sleep for the given time after the @@ -397,8 +455,7 @@ EXPORT_SYMBOL_GPL(w1_reset_select_slave); * the next write, specifying zero will clear a previous request. * The w1 master lock must be held. * - * @param delay time in milliseconds - * @return 0=success, anything else=error + * Return: 0=success, anything else=error */ void w1_next_pullup(struct w1_master *dev, int delay) { |