diff options
Diffstat (limited to 'drivers/w1/slaves/w1_ds2408.c')
| -rw-r--r-- | drivers/w1/slaves/w1_ds2408.c | 216 |
1 files changed, 91 insertions, 125 deletions
diff --git a/drivers/w1/slaves/w1_ds2408.c b/drivers/w1/slaves/w1_ds2408.c index 441ad3a3b58..7dfa0e11688 100644 --- a/drivers/w1/slaves/w1_ds2408.c +++ b/drivers/w1/slaves/w1_ds2408.c @@ -22,6 +22,7 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Jean-Francois Dagenais <dagenaisj@sonatest.com>"); MODULE_DESCRIPTION("w1 family 29 driver for DS2408 8 Pin IO"); +MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2408)); #define W1_F29_RETRIES 3 @@ -71,10 +72,9 @@ static int _read_reg(struct w1_slave *sl, u8 address, unsigned char* buf) return 1; } -static ssize_t w1_f29_read_state( - struct file *filp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t off, size_t count) +static ssize_t state_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, loff_t off, + size_t count) { dev_dbg(&kobj_to_w1_slave(kobj)->dev, "Reading %s kobj: %p, off: %0#10x, count: %zu, buff addr: %p", @@ -84,10 +84,9 @@ static ssize_t w1_f29_read_state( return _read_reg(kobj_to_w1_slave(kobj), W1_F29_REG_LOGIG_STATE, buf); } -static ssize_t w1_f29_read_output( - struct file *filp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t off, size_t count) +static ssize_t output_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, + loff_t off, size_t count) { dev_dbg(&kobj_to_w1_slave(kobj)->dev, "Reading %s kobj: %p, off: %0#10x, count: %zu, buff addr: %p", @@ -98,10 +97,9 @@ static ssize_t w1_f29_read_output( W1_F29_REG_OUTPUT_LATCH_STATE, buf); } -static ssize_t w1_f29_read_activity( - struct file *filp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t off, size_t count) +static ssize_t activity_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, + loff_t off, size_t count) { dev_dbg(&kobj_to_w1_slave(kobj)->dev, "Reading %s kobj: %p, off: %0#10x, count: %zu, buff addr: %p", @@ -112,10 +110,9 @@ static ssize_t w1_f29_read_activity( W1_F29_REG_ACTIVITY_LATCH_STATE, buf); } -static ssize_t w1_f29_read_cond_search_mask( - struct file *filp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t off, size_t count) +static ssize_t cond_search_mask_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, + loff_t off, size_t count) { dev_dbg(&kobj_to_w1_slave(kobj)->dev, "Reading %s kobj: %p, off: %0#10x, count: %zu, buff addr: %p", @@ -126,10 +123,10 @@ static ssize_t w1_f29_read_cond_search_mask( W1_F29_REG_COND_SEARCH_SELECT_MASK, buf); } -static ssize_t w1_f29_read_cond_search_polarity( - struct file *filp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t off, size_t count) +static ssize_t cond_search_polarity_read(struct file *filp, + struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) { if (count != 1 || off != 0) return -EFAULT; @@ -137,10 +134,9 @@ static ssize_t w1_f29_read_cond_search_polarity( W1_F29_REG_COND_SEARCH_POL_SELECT, buf); } -static ssize_t w1_f29_read_status_control( - struct file *filp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t off, size_t count) +static ssize_t status_control_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, + loff_t off, size_t count) { if (count != 1 || off != 0) return -EFAULT; @@ -148,13 +144,9 @@ static ssize_t w1_f29_read_status_control( W1_F29_REG_CONTROL_AND_STATUS, buf); } - - - -static ssize_t w1_f29_write_output( - struct file *filp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t off, size_t count) +static ssize_t output_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, + loff_t off, size_t count) { struct w1_slave *sl = kobj_to_w1_slave(kobj); u8 w1_buf[3]; @@ -178,6 +170,15 @@ static ssize_t w1_f29_write_output( w1_write_block(sl->master, w1_buf, 3); readBack = w1_read_8(sl->master); + + if (readBack != W1_F29_SUCCESS_CONFIRM_BYTE) { + if (w1_reset_resume_command(sl->master)) + goto error; + /* try again, the slave is ready for a command */ + continue; + } + +#ifdef CONFIG_W1_SLAVE_DS2408_READBACK /* here the master could read another byte which would be the PIO reg (the actual pin logic state) since in this driver we don't know which pins are @@ -186,11 +187,6 @@ static ssize_t w1_f29_write_output( if (w1_reset_resume_command(sl->master)) goto error; - if (readBack != 0xAA) { - /* try again, the slave is ready for a command */ - continue; - } - /* go read back the output latches */ /* (the direct effect of the write above) */ w1_buf[0] = W1_F29_FUNC_READ_PIO_REGS; @@ -198,7 +194,9 @@ static ssize_t w1_f29_write_output( w1_buf[2] = 0; w1_write_block(sl->master, w1_buf, 3); /* read the result of the READ_PIO_REGS command */ - if (w1_read_8(sl->master) == *buf) { + if (w1_read_8(sl->master) == *buf) +#endif + { /* success! */ mutex_unlock(&sl->master->bus_mutex); dev_dbg(&sl->dev, @@ -217,10 +215,9 @@ error: /** * Writing to the activity file resets the activity latches. */ -static ssize_t w1_f29_write_activity( - struct file *filp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t off, size_t count) +static ssize_t activity_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, + loff_t off, size_t count) { struct w1_slave *sl = kobj_to_w1_slave(kobj); unsigned int retries = W1_F29_RETRIES; @@ -248,13 +245,9 @@ error: return -EIO; } -static ssize_t w1_f29_write_status_control( - struct file *filp, - struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, - loff_t off, - size_t count) +static ssize_t status_control_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, + loff_t off, size_t count) { struct w1_slave *sl = kobj_to_w1_slave(kobj); u8 w1_buf[4]; @@ -295,90 +288,63 @@ error: return -EIO; } +/* + * This is a special sequence we must do to ensure the P0 output is not stuck + * in test mode. This is described in rev 2 of the ds2408's datasheet + * (http://datasheets.maximintegrated.com/en/ds/DS2408.pdf) under + * "APPLICATION INFORMATION/Power-up timing". + */ +static int w1_f29_disable_test_mode(struct w1_slave *sl) +{ + int res; + u8 magic[10] = {0x96, }; + u64 rn = le64_to_cpu(*((u64*)&sl->reg_num)); + memcpy(&magic[1], &rn, 8); + magic[9] = 0x3C; -#define NB_SYSFS_BIN_FILES 6 -static struct bin_attribute w1_f29_sysfs_bin_files[NB_SYSFS_BIN_FILES] = { - { - .attr = { - .name = "state", - .mode = S_IRUGO, - }, - .size = 1, - .read = w1_f29_read_state, - }, - { - .attr = { - .name = "output", - .mode = S_IRUGO | S_IWUSR | S_IWGRP, - }, - .size = 1, - .read = w1_f29_read_output, - .write = w1_f29_write_output, - }, - { - .attr = { - .name = "activity", - .mode = S_IRUGO, - }, - .size = 1, - .read = w1_f29_read_activity, - .write = w1_f29_write_activity, - }, - { - .attr = { - .name = "cond_search_mask", - .mode = S_IRUGO, - }, - .size = 1, - .read = w1_f29_read_cond_search_mask, - }, - { - .attr = { - .name = "cond_search_polarity", - .mode = S_IRUGO, - }, - .size = 1, - .read = w1_f29_read_cond_search_polarity, - }, - { - .attr = { - .name = "status_control", - .mode = S_IRUGO | S_IWUSR | S_IWGRP, - }, - .size = 1, - .read = w1_f29_read_status_control, - .write = w1_f29_write_status_control, - } -}; + mutex_lock(&sl->master->bus_mutex); -static int w1_f29_add_slave(struct w1_slave *sl) -{ - int err = 0; - int i; - - for (i = 0; i < NB_SYSFS_BIN_FILES && !err; ++i) - err = sysfs_create_bin_file( - &sl->dev.kobj, - &(w1_f29_sysfs_bin_files[i])); - if (err) - while (--i >= 0) - sysfs_remove_bin_file(&sl->dev.kobj, - &(w1_f29_sysfs_bin_files[i])); - return err; -} + res = w1_reset_bus(sl->master); + if (res) + goto out; + w1_write_block(sl->master, magic, ARRAY_SIZE(magic)); -static void w1_f29_remove_slave(struct w1_slave *sl) -{ - int i; - for (i = NB_SYSFS_BIN_FILES - 1; i >= 0; --i) - sysfs_remove_bin_file(&sl->dev.kobj, - &(w1_f29_sysfs_bin_files[i])); + res = w1_reset_bus(sl->master); +out: + mutex_unlock(&sl->master->bus_mutex); + return res; } +static BIN_ATTR_RO(state, 1); +static BIN_ATTR_RW(output, 1); +static BIN_ATTR_RW(activity, 1); +static BIN_ATTR_RO(cond_search_mask, 1); +static BIN_ATTR_RO(cond_search_polarity, 1); +static BIN_ATTR_RW(status_control, 1); + +static struct bin_attribute *w1_f29_bin_attrs[] = { + &bin_attr_state, + &bin_attr_output, + &bin_attr_activity, + &bin_attr_cond_search_mask, + &bin_attr_cond_search_polarity, + &bin_attr_status_control, + NULL, +}; + +static const struct attribute_group w1_f29_group = { + .bin_attrs = w1_f29_bin_attrs, +}; + +static const struct attribute_group *w1_f29_groups[] = { + &w1_f29_group, + NULL, +}; + static struct w1_family_ops w1_f29_fops = { - .add_slave = w1_f29_add_slave, - .remove_slave = w1_f29_remove_slave, + .add_slave = w1_f29_disable_test_mode, + .groups = w1_f29_groups, }; static struct w1_family w1_family_29 = { |