aboutsummaryrefslogtreecommitdiff
path: root/drivers/vme
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/vme')
-rw-r--r--drivers/vme/Kconfig2
-rw-r--r--drivers/vme/boards/vme_vmivme7805.c2
-rw-r--r--drivers/vme/bridges/vme_ca91cx42.c35
-rw-r--r--drivers/vme/bridges/vme_tsi148.c46
-rw-r--r--drivers/vme/vme.c25
5 files changed, 61 insertions, 49 deletions
diff --git a/drivers/vme/Kconfig b/drivers/vme/Kconfig
index c5c22465a80..a6a6f955911 100644
--- a/drivers/vme/Kconfig
+++ b/drivers/vme/Kconfig
@@ -3,7 +3,7 @@
#
menuconfig VME_BUS
- tristate "VME bridge support"
+ bool "VME bridge support"
depends on PCI
---help---
If you say Y here you get support for the VME bridge Framework.
diff --git a/drivers/vme/boards/vme_vmivme7805.c b/drivers/vme/boards/vme_vmivme7805.c
index cf74aee2cef..ac422121f9b 100644
--- a/drivers/vme/boards/vme_vmivme7805.c
+++ b/drivers/vme/boards/vme_vmivme7805.c
@@ -27,7 +27,7 @@ static void __iomem *vmic_base;
static const char driver_name[] = "vmivme_7805";
-static DEFINE_PCI_DEVICE_TABLE(vmic_ids) = {
+static const struct pci_device_id vmic_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_VMIC, PCI_DEVICE_ID_VTIMR) },
{ },
};
diff --git a/drivers/vme/bridges/vme_ca91cx42.c b/drivers/vme/bridges/vme_ca91cx42.c
index f8448573d03..bfb2d3f0673 100644
--- a/drivers/vme/bridges/vme_ca91cx42.c
+++ b/drivers/vme/bridges/vme_ca91cx42.c
@@ -42,7 +42,7 @@ static int geoid;
static const char driver_name[] = "vme_ca91cx42";
-static DEFINE_PCI_DEVICE_TABLE(ca91cx42_ids) = {
+static const struct pci_device_id ca91cx42_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_TUNDRA, PCI_DEVICE_ID_TUNDRA_CA91C142) },
{ },
};
@@ -869,14 +869,13 @@ static ssize_t ca91cx42_master_read(struct vme_master_resource *image,
spin_lock(&image->lock);
- /* The following code handles VME address alignment problem
- * in order to assure the maximal data width cycle.
- * We cannot use memcpy_xxx directly here because it
- * may cut data transfer in 8-bits cycles, thus making
- * D16 cycle impossible.
- * From the other hand, the bridge itself assures that
- * maximal configured data cycle is used and splits it
- * automatically for non-aligned addresses.
+ /* The following code handles VME address alignment. We cannot use
+ * memcpy_xxx here because it may cut data transfers in to 8-bit
+ * cycles when D16 or D32 cycles are required on the VME bus.
+ * On the other hand, the bridge itself assures that the maximum data
+ * cycle configured for the transfer is used and splits it
+ * automatically for non-aligned addresses, so we don't want the
+ * overhead of needlessly forcing small transfers for the entire cycle.
*/
if ((uintptr_t)addr & 0x1) {
*(u8 *)buf = ioread8(addr);
@@ -884,7 +883,7 @@ static ssize_t ca91cx42_master_read(struct vme_master_resource *image,
if (done == count)
goto out;
}
- if ((uintptr_t)addr & 0x2) {
+ if ((uintptr_t)(addr + done) & 0x2) {
if ((count - done) < 2) {
*(u8 *)(buf + done) = ioread8(addr + done);
done += 1;
@@ -896,9 +895,9 @@ static ssize_t ca91cx42_master_read(struct vme_master_resource *image,
}
count32 = (count - done) & ~0x3;
- if (count32 > 0) {
- memcpy_fromio(buf + done, addr + done, (unsigned int)count);
- done += count32;
+ while (done < count32) {
+ *(u32 *)(buf + done) = ioread32(addr + done);
+ done += 4;
}
if ((count - done) & 0x2) {
@@ -930,7 +929,7 @@ static ssize_t ca91cx42_master_write(struct vme_master_resource *image,
spin_lock(&image->lock);
/* Here we apply for the same strategy we do in master_read
- * function in order to assure D16 cycle when required.
+ * function in order to assure the correct cycles.
*/
if ((uintptr_t)addr & 0x1) {
iowrite8(*(u8 *)buf, addr);
@@ -938,7 +937,7 @@ static ssize_t ca91cx42_master_write(struct vme_master_resource *image,
if (done == count)
goto out;
}
- if ((uintptr_t)addr & 0x2) {
+ if ((uintptr_t)(addr + done) & 0x2) {
if ((count - done) < 2) {
iowrite8(*(u8 *)(buf + done), addr + done);
done += 1;
@@ -950,9 +949,9 @@ static ssize_t ca91cx42_master_write(struct vme_master_resource *image,
}
count32 = (count - done) & ~0x3;
- if (count32 > 0) {
- memcpy_toio(addr + done, buf + done, count32);
- done += count32;
+ while (done < count32) {
+ iowrite32(*(u32 *)(buf + done), addr + done);
+ done += 4;
}
if ((count - done) & 0x2) {
diff --git a/drivers/vme/bridges/vme_tsi148.c b/drivers/vme/bridges/vme_tsi148.c
index 9cf88337e4e..61e706c0e00 100644
--- a/drivers/vme/bridges/vme_tsi148.c
+++ b/drivers/vme/bridges/vme_tsi148.c
@@ -45,7 +45,7 @@ static int geoid;
static const char driver_name[] = "vme_tsi148";
-static DEFINE_PCI_DEVICE_TABLE(tsi148_ids) = {
+static const struct pci_device_id tsi148_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_TUNDRA, PCI_DEVICE_ID_TUNDRA_TSI148) },
{ },
};
@@ -320,7 +320,7 @@ static int tsi148_irq_init(struct vme_bridge *tsi148_bridge)
struct pci_dev *pdev;
struct tsi148_driver *bridge;
- pdev = container_of(tsi148_bridge->parent, struct pci_dev, dev);
+ pdev = to_pci_dev(tsi148_bridge->parent);
bridge = tsi148_bridge->driver_priv;
@@ -433,9 +433,7 @@ static void tsi148_irq_set(struct vme_bridge *tsi148_bridge, int level,
iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO);
if (sync != 0) {
- pdev = container_of(tsi148_bridge->parent,
- struct pci_dev, dev);
-
+ pdev = to_pci_dev(tsi148_bridge->parent);
synchronize_irq(pdev->irq);
}
} else {
@@ -741,7 +739,7 @@ static int tsi148_slave_get(struct vme_slave_resource *image, int *enabled,
reg_join(vme_bound_high, vme_bound_low, &vme_bound);
reg_join(pci_offset_high, pci_offset_low, &pci_offset);
- *pci_base = (dma_addr_t)vme_base + pci_offset;
+ *pci_base = (dma_addr_t)(*vme_base + pci_offset);
*enabled = 0;
*aspace = 0;
@@ -814,7 +812,7 @@ static int tsi148_alloc_resource(struct vme_master_resource *image,
tsi148_bridge = image->parent;
- pdev = container_of(tsi148_bridge->parent, struct pci_dev, dev);
+ pdev = to_pci_dev(tsi148_bridge->parent);
existing_size = (unsigned long long)(image->bus_resource.end -
image->bus_resource.start);
@@ -910,11 +908,15 @@ static int tsi148_master_set(struct vme_master_resource *image, int enabled,
unsigned long long pci_bound, vme_offset, pci_base;
struct vme_bridge *tsi148_bridge;
struct tsi148_driver *bridge;
+ struct pci_bus_region region;
+ struct pci_dev *pdev;
tsi148_bridge = image->parent;
bridge = tsi148_bridge->driver_priv;
+ pdev = to_pci_dev(tsi148_bridge->parent);
+
/* Verify input data */
if (vme_base & 0xFFFF) {
dev_err(tsi148_bridge->parent, "Invalid VME Window "
@@ -949,7 +951,9 @@ static int tsi148_master_set(struct vme_master_resource *image, int enabled,
pci_bound = 0;
vme_offset = 0;
} else {
- pci_base = (unsigned long long)image->bus_resource.start;
+ pcibios_resource_to_bus(pdev->bus, &region,
+ &image->bus_resource);
+ pci_base = region.start;
/*
* Bound address is a valid address for the window, adjust
@@ -1276,8 +1280,8 @@ static ssize_t tsi148_master_read(struct vme_master_resource *image, void *buf,
spin_lock(&image->lock);
/* The following code handles VME address alignment. We cannot use
- * memcpy_xxx directly here because it may cut small data transfers in
- * to 8-bit cycles, thus making D16 cycle impossible.
+ * memcpy_xxx here because it may cut data transfers in to 8-bit
+ * cycles when D16 or D32 cycles are required on the VME bus.
* On the other hand, the bridge itself assures that the maximum data
* cycle configured for the transfer is used and splits it
* automatically for non-aligned addresses, so we don't want the
@@ -1289,7 +1293,7 @@ static ssize_t tsi148_master_read(struct vme_master_resource *image, void *buf,
if (done == count)
goto out;
}
- if ((uintptr_t)addr & 0x2) {
+ if ((uintptr_t)(addr + done) & 0x2) {
if ((count - done) < 2) {
*(u8 *)(buf + done) = ioread8(addr + done);
done += 1;
@@ -1301,9 +1305,9 @@ static ssize_t tsi148_master_read(struct vme_master_resource *image, void *buf,
}
count32 = (count - done) & ~0x3;
- if (count32 > 0) {
- memcpy_fromio(buf + done, addr + done, count32);
- done += count32;
+ while (done < count32) {
+ *(u32 *)(buf + done) = ioread32(addr + done);
+ done += 4;
}
if ((count - done) & 0x2) {
@@ -1363,7 +1367,7 @@ static ssize_t tsi148_master_write(struct vme_master_resource *image, void *buf,
spin_lock(&image->lock);
/* Here we apply for the same strategy we do in master_read
- * function in order to assure D16 cycle when required.
+ * function in order to assure the correct cycles.
*/
if ((uintptr_t)addr & 0x1) {
iowrite8(*(u8 *)buf, addr);
@@ -1371,7 +1375,7 @@ static ssize_t tsi148_master_write(struct vme_master_resource *image, void *buf,
if (done == count)
goto out;
}
- if ((uintptr_t)addr & 0x2) {
+ if ((uintptr_t)(addr + done) & 0x2) {
if ((count - done) < 2) {
iowrite8(*(u8 *)(buf + done), addr + done);
done += 1;
@@ -1383,9 +1387,9 @@ static ssize_t tsi148_master_write(struct vme_master_resource *image, void *buf,
}
count32 = (count - done) & ~0x3;
- if (count32 > 0) {
- memcpy_toio(addr + done, buf + done, count32);
- done += count32;
+ while (done < count32) {
+ iowrite32(*(u32 *)(buf + done), addr + done);
+ done += 4;
}
if ((count - done) & 0x2) {
@@ -2232,7 +2236,7 @@ static void *tsi148_alloc_consistent(struct device *parent, size_t size,
struct pci_dev *pdev;
/* Find pci_dev container of dev */
- pdev = container_of(parent, struct pci_dev, dev);
+ pdev = to_pci_dev(parent);
return pci_alloc_consistent(pdev, size, dma);
}
@@ -2243,7 +2247,7 @@ static void tsi148_free_consistent(struct device *parent, size_t size,
struct pci_dev *pdev;
/* Find pci_dev container of dev */
- pdev = container_of(parent, struct pci_dev, dev);
+ pdev = to_pci_dev(parent);
pci_free_consistent(pdev, size, vaddr, dma);
}
diff --git a/drivers/vme/vme.c b/drivers/vme/vme.c
index f6856b42749..7516030037a 100644
--- a/drivers/vme/vme.c
+++ b/drivers/vme/vme.c
@@ -1274,7 +1274,7 @@ void vme_lm_free(struct vme_resource *resource)
}
EXPORT_SYMBOL(vme_lm_free);
-int vme_slot_get(struct vme_dev *vdev)
+int vme_slot_num(struct vme_dev *vdev)
{
struct vme_bridge *bridge;
@@ -1285,14 +1285,27 @@ int vme_slot_get(struct vme_dev *vdev)
}
if (bridge->slot_get == NULL) {
- printk(KERN_WARNING "vme_slot_get not supported\n");
+ printk(KERN_WARNING "vme_slot_num not supported\n");
return -EINVAL;
}
return bridge->slot_get(bridge);
}
-EXPORT_SYMBOL(vme_slot_get);
+EXPORT_SYMBOL(vme_slot_num);
+int vme_bus_num(struct vme_dev *vdev)
+{
+ struct vme_bridge *bridge;
+
+ bridge = vdev->bridge;
+ if (bridge == NULL) {
+ pr_err("Can't find VME bus\n");
+ return -EINVAL;
+ }
+
+ return bridge->num;
+}
+EXPORT_SYMBOL(vme_bus_num);
/* - Bridge Registration --------------------------------------------------- */
@@ -1512,9 +1525,5 @@ static void __exit vme_exit(void)
bus_unregister(&vme_bus_type);
}
-MODULE_DESCRIPTION("VME bridge driver framework");
-MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com");
-MODULE_LICENSE("GPL");
-
-module_init(vme_init);
+subsys_initcall(vme_init);
module_exit(vme_exit);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-06 21:36:01 +0000