aboutsummaryrefslogtreecommitdiff
path: root/drivers/video/fbdev/aty/aty128fb.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/video/fbdev/aty/aty128fb.c')
-rw-r--r--drivers/video/fbdev/aty/aty128fb.c2591
1 files changed, 2591 insertions, 0 deletions
diff --git a/drivers/video/fbdev/aty/aty128fb.c b/drivers/video/fbdev/aty/aty128fb.c
new file mode 100644
index 00000000000..52108be69e7
--- /dev/null
+++ b/drivers/video/fbdev/aty/aty128fb.c
@@ -0,0 +1,2591 @@
+/* $Id: aty128fb.c,v 1.1.1.1.36.1 1999/12/11 09:03:05 Exp $
+ * linux/drivers/video/aty128fb.c -- Frame buffer device for ATI Rage128
+ *
+ * Copyright (C) 1999-2003, Brad Douglas <brad@neruo.com>
+ * Copyright (C) 1999, Anthony Tong <atong@uiuc.edu>
+ *
+ * Ani Joshi / Jeff Garzik
+ * - Code cleanup
+ *
+ * Michel Danzer <michdaen@iiic.ethz.ch>
+ * - 15/16 bit cleanup
+ * - fix panning
+ *
+ * Benjamin Herrenschmidt
+ * - pmac-specific PM stuff
+ * - various fixes & cleanups
+ *
+ * Andreas Hundt <andi@convergence.de>
+ * - FB_ACTIVATE fixes
+ *
+ * Paul Mackerras <paulus@samba.org>
+ * - Convert to new framebuffer API,
+ * fix colormap setting at 16 bits/pixel (565)
+ *
+ * Paul Mundt
+ * - PCI hotplug
+ *
+ * Jon Smirl <jonsmirl@yahoo.com>
+ * - PCI ID update
+ * - replace ROM BIOS search
+ *
+ * Based off of Geert's atyfb.c and vfb.c.
+ *
+ * TODO:
+ * - monitor sensing (DDC)
+ * - virtual display
+ * - other platform support (only ppc/x86 supported)
+ * - hardware cursor support
+ *
+ * Please cc: your patches to brad@neruo.com.
+ */
+
+/*
+ * A special note of gratitude to ATI's devrel for providing documentation,
+ * example code and hardware. Thanks Nitya. -atong and brad
+ */
+
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/uaccess.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <linux/console.h>
+#include <linux/backlight.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_PPC_PMAC
+#include <asm/machdep.h>
+#include <asm/pmac_feature.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include "../macmodes.h"
+#endif
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+#include <asm/backlight.h>
+#endif
+
+#ifdef CONFIG_BOOTX_TEXT
+#include <asm/btext.h>
+#endif /* CONFIG_BOOTX_TEXT */
+
+#ifdef CONFIG_MTRR
+#include <asm/mtrr.h>
+#endif
+
+#include <video/aty128.h>
+
+/* Debug flag */
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt, args...) \
+ printk(KERN_DEBUG "aty128fb: %s " fmt, __func__, ##args);
+#else
+#define DBG(fmt, args...)
+#endif
+
+#ifndef CONFIG_PPC_PMAC
+/* default mode */
+static struct fb_var_screeninfo default_var = {
+ /* 640x480, 60 Hz, Non-Interlaced (25.175 MHz dotclock) */
+ 640, 480, 640, 480, 0, 0, 8, 0,
+ {0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0},
+ 0, 0, -1, -1, 0, 39722, 48, 16, 33, 10, 96, 2,
+ 0, FB_VMODE_NONINTERLACED
+};
+
+#else /* CONFIG_PPC_PMAC */
+/* default to 1024x768 at 75Hz on PPC - this will work
+ * on the iMac, the usual 640x480 @ 60Hz doesn't. */
+static struct fb_var_screeninfo default_var = {
+ /* 1024x768, 75 Hz, Non-Interlaced (78.75 MHz dotclock) */
+ 1024, 768, 1024, 768, 0, 0, 8, 0,
+ {0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0},
+ 0, 0, -1, -1, 0, 12699, 160, 32, 28, 1, 96, 3,
+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ FB_VMODE_NONINTERLACED
+};
+#endif /* CONFIG_PPC_PMAC */
+
+/* default modedb mode */
+/* 640x480, 60 Hz, Non-Interlaced (25.172 MHz dotclock) */
+static struct fb_videomode defaultmode = {
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 39722,
+ .left_margin = 48,
+ .right_margin = 16,
+ .upper_margin = 33,
+ .lower_margin = 10,
+ .hsync_len = 96,
+ .vsync_len = 2,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED
+};
+
+/* Chip generations */
+enum {
+ rage_128,
+ rage_128_pci,
+ rage_128_pro,
+ rage_128_pro_pci,
+ rage_M3,
+ rage_M3_pci,
+ rage_M4,
+ rage_128_ultra,
+};
+
+/* Must match above enum */
+static char * const r128_family[] = {
+ "AGP",
+ "PCI",
+ "PRO AGP",
+ "PRO PCI",
+ "M3 AGP",
+ "M3 PCI",
+ "M4 AGP",
+ "Ultra AGP",
+};
+
+/*
+ * PCI driver prototypes
+ */
+static int aty128_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent);
+static void aty128_remove(struct pci_dev *pdev);
+static int aty128_pci_suspend(struct pci_dev *pdev, pm_message_t state);
+static int aty128_pci_resume(struct pci_dev *pdev);
+static int aty128_do_resume(struct pci_dev *pdev);
+
+/* supported Rage128 chipsets */
+static struct pci_device_id aty128_pci_tbl[] = {
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_LE,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_M3_pci },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_LF,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_M3 },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_MF,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_M4 },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_ML,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_M4 },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PA,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PB,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PC,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PD,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro_pci },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PE,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PF,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PG,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PH,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PI,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PJ,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PK,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PL,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PM,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PN,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PO,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PP,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro_pci },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PQ,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PR,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro_pci },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PS,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PT,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PU,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PV,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PW,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PX,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_RE,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pci },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_RF,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_RG,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_RK,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pci },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_RL,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SE,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SF,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pci },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SG,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SH,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SK,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SL,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SM,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SN,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_TF,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_ultra },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_TL,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_ultra },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_TR,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_ultra },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_TS,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_ultra },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_TT,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_ultra },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_TU,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_ultra },
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, aty128_pci_tbl);
+
+static struct pci_driver aty128fb_driver = {
+ .name = "aty128fb",
+ .id_table = aty128_pci_tbl,
+ .probe = aty128_probe,
+ .remove = aty128_remove,
+ .suspend = aty128_pci_suspend,
+ .resume = aty128_pci_resume,
+};
+
+/* packed BIOS settings */
+#ifndef CONFIG_PPC
+typedef struct {
+ u8 clock_chip_type;
+ u8 struct_size;
+ u8 accelerator_entry;
+ u8 VGA_entry;
+ u16 VGA_table_offset;
+ u16 POST_table_offset;
+ u16 XCLK;
+ u16 MCLK;
+ u8 num_PLL_blocks;
+ u8 size_PLL_blocks;
+ u16 PCLK_ref_freq;
+ u16 PCLK_ref_divider;
+ u32 PCLK_min_freq;
+ u32 PCLK_max_freq;
+ u16 MCLK_ref_freq;
+ u16 MCLK_ref_divider;
+ u32 MCLK_min_freq;
+ u32 MCLK_max_freq;
+ u16 XCLK_ref_freq;
+ u16 XCLK_ref_divider;
+ u32 XCLK_min_freq;
+ u32 XCLK_max_freq;
+} __attribute__ ((packed)) PLL_BLOCK;
+#endif /* !CONFIG_PPC */
+
+/* onboard memory information */
+struct aty128_meminfo {
+ u8 ML;
+ u8 MB;
+ u8 Trcd;
+ u8 Trp;
+ u8 Twr;
+ u8 CL;
+ u8 Tr2w;
+ u8 LoopLatency;
+ u8 DspOn;
+ u8 Rloop;
+ const char *name;
+};
+
+/* various memory configurations */
+static const struct aty128_meminfo sdr_128 =
+ { 4, 4, 3, 3, 1, 3, 1, 16, 30, 16, "128-bit SDR SGRAM (1:1)" };
+static const struct aty128_meminfo sdr_64 =
+ { 4, 8, 3, 3, 1, 3, 1, 17, 46, 17, "64-bit SDR SGRAM (1:1)" };
+static const struct aty128_meminfo sdr_sgram =
+ { 4, 4, 1, 2, 1, 2, 1, 16, 24, 16, "64-bit SDR SGRAM (2:1)" };
+static const struct aty128_meminfo ddr_sgram =
+ { 4, 4, 3, 3, 2, 3, 1, 16, 31, 16, "64-bit DDR SGRAM" };
+
+static struct fb_fix_screeninfo aty128fb_fix = {
+ .id = "ATY Rage128",
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_PSEUDOCOLOR,
+ .xpanstep = 8,
+ .ypanstep = 1,
+ .mmio_len = 0x2000,
+ .accel = FB_ACCEL_ATI_RAGE128,
+};
+
+static char *mode_option = NULL;
+
+#ifdef CONFIG_PPC_PMAC
+static int default_vmode = VMODE_1024_768_60;
+static int default_cmode = CMODE_8;
+#endif
+
+static int default_crt_on = 0;
+static int default_lcd_on = 1;
+
+#ifdef CONFIG_MTRR
+static bool mtrr = true;
+#endif
+
+#ifdef CONFIG_FB_ATY128_BACKLIGHT
+#ifdef CONFIG_PMAC_BACKLIGHT
+static int backlight = 1;
+#else
+static int backlight = 0;
+#endif
+#endif
+
+/* PLL constants */
+struct aty128_constants {
+ u32 ref_clk;
+ u32 ppll_min;
+ u32 ppll_max;
+ u32 ref_divider;
+ u32 xclk;
+ u32 fifo_width;
+ u32 fifo_depth;
+};
+
+struct aty128_crtc {
+ u32 gen_cntl;
+ u32 h_total, h_sync_strt_wid;
+ u32 v_total, v_sync_strt_wid;
+ u32 pitch;
+ u32 offset, offset_cntl;
+ u32 xoffset, yoffset;
+ u32 vxres, vyres;
+ u32 depth, bpp;
+};
+
+struct aty128_pll {
+ u32 post_divider;
+ u32 feedback_divider;
+ u32 vclk;
+};
+
+struct aty128_ddafifo {
+ u32 dda_config;
+ u32 dda_on_off;
+};
+
+/* register values for a specific mode */
+struct aty128fb_par {
+ struct aty128_crtc crtc;
+ struct aty128_pll pll;
+ struct aty128_ddafifo fifo_reg;
+ u32 accel_flags;
+ struct aty128_constants constants; /* PLL and others */
+ void __iomem *regbase; /* remapped mmio */
+ u32 vram_size; /* onboard video ram */
+ int chip_gen;
+ const struct aty128_meminfo *mem; /* onboard mem info */
+#ifdef CONFIG_MTRR
+ struct { int vram; int vram_valid; } mtrr;
+#endif
+ int blitter_may_be_busy;
+ int fifo_slots; /* free slots in FIFO (64 max) */
+
+ int crt_on, lcd_on;
+ struct pci_dev *pdev;
+ struct fb_info *next;
+ int asleep;
+ int lock_blank;
+
+ u8 red[32]; /* see aty128fb_setcolreg */
+ u8 green[64];
+ u8 blue[32];
+ u32 pseudo_palette[16]; /* used for TRUECOLOR */
+};
+
+
+#define round_div(n, d) ((n+(d/2))/d)
+
+static int aty128fb_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *info);
+static int aty128fb_set_par(struct fb_info *info);
+static int aty128fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
+ u_int transp, struct fb_info *info);
+static int aty128fb_pan_display(struct fb_var_screeninfo *var,
+ struct fb_info *fb);
+static int aty128fb_blank(int blank, struct fb_info *fb);
+static int aty128fb_ioctl(struct fb_info *info, u_int cmd, unsigned long arg);
+static int aty128fb_sync(struct fb_info *info);
+
+ /*
+ * Internal routines
+ */
+
+static int aty128_encode_var(struct fb_var_screeninfo *var,
+ const struct aty128fb_par *par);
+static int aty128_decode_var(struct fb_var_screeninfo *var,
+ struct aty128fb_par *par);
+#if 0
+static void aty128_get_pllinfo(struct aty128fb_par *par, void __iomem *bios);
+static void __iomem *aty128_map_ROM(struct pci_dev *pdev,
+ const struct aty128fb_par *par);
+#endif
+static void aty128_timings(struct aty128fb_par *par);
+static void aty128_init_engine(struct aty128fb_par *par);
+static void aty128_reset_engine(const struct aty128fb_par *par);
+static void aty128_flush_pixel_cache(const struct aty128fb_par *par);
+static void do_wait_for_fifo(u16 entries, struct aty128fb_par *par);
+static void wait_for_fifo(u16 entries, struct aty128fb_par *par);
+static void wait_for_idle(struct aty128fb_par *par);
+static u32 depth_to_dst(u32 depth);
+
+#ifdef CONFIG_FB_ATY128_BACKLIGHT
+static void aty128_bl_set_power(struct fb_info *info, int power);
+#endif
+
+#define BIOS_IN8(v) (readb(bios + (v)))
+#define BIOS_IN16(v) (readb(bios + (v)) | \
+ (readb(bios + (v) + 1) << 8))
+#define BIOS_IN32(v) (readb(bios + (v)) | \
+ (readb(bios + (v) + 1) << 8) | \
+ (readb(bios + (v) + 2) << 16) | \
+ (readb(bios + (v) + 3) << 24))
+
+
+static struct fb_ops aty128fb_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = aty128fb_check_var,
+ .fb_set_par = aty128fb_set_par,
+ .fb_setcolreg = aty128fb_setcolreg,
+ .fb_pan_display = aty128fb_pan_display,
+ .fb_blank = aty128fb_blank,
+ .fb_ioctl = aty128fb_ioctl,
+ .fb_sync = aty128fb_sync,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+};
+
+ /*
+ * Functions to read from/write to the mmio registers
+ * - endian conversions may possibly be avoided by
+ * using the other register aperture. TODO.
+ */
+static inline u32 _aty_ld_le32(volatile unsigned int regindex,
+ const struct aty128fb_par *par)
+{
+ return readl (par->regbase + regindex);
+}
+
+static inline void _aty_st_le32(volatile unsigned int regindex, u32 val,
+ const struct aty128fb_par *par)
+{
+ writel (val, par->regbase + regindex);
+}
+
+static inline u8 _aty_ld_8(unsigned int regindex,
+ const struct aty128fb_par *par)
+{
+ return readb (par->regbase + regindex);
+}
+
+static inline void _aty_st_8(unsigned int regindex, u8 val,
+ const struct aty128fb_par *par)
+{
+ writeb (val, par->regbase + regindex);
+}
+
+#define aty_ld_le32(regindex) _aty_ld_le32(regindex, par)
+#define aty_st_le32(regindex, val) _aty_st_le32(regindex, val, par)
+#define aty_ld_8(regindex) _aty_ld_8(regindex, par)
+#define aty_st_8(regindex, val) _aty_st_8(regindex, val, par)
+
+ /*
+ * Functions to read from/write to the pll registers
+ */
+
+#define aty_ld_pll(pll_index) _aty_ld_pll(pll_index, par)
+#define aty_st_pll(pll_index, val) _aty_st_pll(pll_index, val, par)
+
+
+static u32 _aty_ld_pll(unsigned int pll_index,
+ const struct aty128fb_par *par)
+{
+ aty_st_8(CLOCK_CNTL_INDEX, pll_index & 0x3F);
+ return aty_ld_le32(CLOCK_CNTL_DATA);
+}
+
+
+static void _aty_st_pll(unsigned int pll_index, u32 val,
+ const struct aty128fb_par *par)
+{
+ aty_st_8(CLOCK_CNTL_INDEX, (pll_index & 0x3F) | PLL_WR_EN);
+ aty_st_le32(CLOCK_CNTL_DATA, val);
+}
+
+
+/* return true when the PLL has completed an atomic update */
+static int aty_pll_readupdate(const struct aty128fb_par *par)
+{
+ return !(aty_ld_pll(PPLL_REF_DIV) & PPLL_ATOMIC_UPDATE_R);
+}
+
+
+static void aty_pll_wait_readupdate(const struct aty128fb_par *par)
+{
+ unsigned long timeout = jiffies + HZ/100; // should be more than enough
+ int reset = 1;
+
+ while (time_before(jiffies, timeout))
+ if (aty_pll_readupdate(par)) {
+ reset = 0;
+ break;
+ }
+
+ if (reset) /* reset engine?? */
+ printk(KERN_DEBUG "aty128fb: PLL write timeout!\n");
+}
+
+
+/* tell PLL to update */
+static void aty_pll_writeupdate(const struct aty128fb_par *par)
+{
+ aty_pll_wait_readupdate(par);
+
+ aty_st_pll(PPLL_REF_DIV,
+ aty_ld_pll(PPLL_REF_DIV) | PPLL_ATOMIC_UPDATE_W);
+}
+
+
+/* write to the scratch register to test r/w functionality */
+static int register_test(const struct aty128fb_par *par)
+{
+ u32 val;
+ int flag = 0;
+
+ val = aty_ld_le32(BIOS_0_SCRATCH);
+
+ aty_st_le32(BIOS_0_SCRATCH, 0x55555555);
+ if (aty_ld_le32(BIOS_0_SCRATCH) == 0x55555555) {
+ aty_st_le32(BIOS_0_SCRATCH, 0xAAAAAAAA);
+
+ if (aty_ld_le32(BIOS_0_SCRATCH) == 0xAAAAAAAA)
+ flag = 1;
+ }
+
+ aty_st_le32(BIOS_0_SCRATCH, val); // restore value
+ return flag;
+}
+
+
+/*
+ * Accelerator engine functions
+ */
+static void do_wait_for_fifo(u16 entries, struct aty128fb_par *par)
+{
+ int i;
+
+ for (;;) {
+ for (i = 0; i < 2000000; i++) {
+ par->fifo_slots = aty_ld_le32(GUI_STAT) & 0x0fff;
+ if (par->fifo_slots >= entries)
+ return;
+ }
+ aty128_reset_engine(par);
+ }
+}
+
+
+static void wait_for_idle(struct aty128fb_par *par)
+{
+ int i;
+
+ do_wait_for_fifo(64, par);
+
+ for (;;) {
+ for (i = 0; i < 2000000; i++) {
+ if (!(aty_ld_le32(GUI_STAT) & (1 << 31))) {
+ aty128_flush_pixel_cache(par);
+ par->blitter_may_be_busy = 0;
+ return;
+ }
+ }
+ aty128_reset_engine(par);
+ }
+}
+
+
+static void wait_for_fifo(u16 entries, struct aty128fb_par *par)
+{
+ if (par->fifo_slots < entries)
+ do_wait_for_fifo(64, par);
+ par->fifo_slots -= entries;
+}
+
+
+static void aty128_flush_pixel_cache(const struct aty128fb_par *par)
+{
+ int i;
+ u32 tmp;
+
+ tmp = aty_ld_le32(PC_NGUI_CTLSTAT);
+ tmp &= ~(0x00ff);
+ tmp |= 0x00ff;
+ aty_st_le32(PC_NGUI_CTLSTAT, tmp);
+
+ for (i = 0; i < 2000000; i++)
+ if (!(aty_ld_le32(PC_NGUI_CTLSTAT) & PC_BUSY))
+ break;
+}
+
+
+static void aty128_reset_engine(const struct aty128fb_par *par)
+{
+ u32 gen_reset_cntl, clock_cntl_index, mclk_cntl;
+
+ aty128_flush_pixel_cache(par);
+
+ clock_cntl_index = aty_ld_le32(CLOCK_CNTL_INDEX);
+ mclk_cntl = aty_ld_pll(MCLK_CNTL);
+
+ aty_st_pll(MCLK_CNTL, mclk_cntl | 0x00030000);
+
+ gen_reset_cntl = aty_ld_le32(GEN_RESET_CNTL);
+ aty_st_le32(GEN_RESET_CNTL, gen_reset_cntl | SOFT_RESET_GUI);
+ aty_ld_le32(GEN_RESET_CNTL);
+ aty_st_le32(GEN_RESET_CNTL, gen_reset_cntl & ~(SOFT_RESET_GUI));
+ aty_ld_le32(GEN_RESET_CNTL);
+
+ aty_st_pll(MCLK_CNTL, mclk_cntl);
+ aty_st_le32(CLOCK_CNTL_INDEX, clock_cntl_index);
+ aty_st_le32(GEN_RESET_CNTL, gen_reset_cntl);
+
+ /* use old pio mode */
+ aty_st_le32(PM4_BUFFER_CNTL, PM4_BUFFER_CNTL_NONPM4);
+
+ DBG("engine reset");
+}
+
+
+static void aty128_init_engine(struct aty128fb_par *par)
+{
+ u32 pitch_value;
+
+ wait_for_idle(par);
+
+ /* 3D scaler not spoken here */
+ wait_for_fifo(1, par);
+ aty_st_le32(SCALE_3D_CNTL, 0x00000000);
+
+ aty128_reset_engine(par);
+
+ pitch_value = par->crtc.pitch;
+ if (par->crtc.bpp == 24) {
+ pitch_value = pitch_value * 3;
+ }
+
+ wait_for_fifo(4, par);
+ /* setup engine offset registers */
+ aty_st_le32(DEFAULT_OFFSET, 0x00000000);
+
+ /* setup engine pitch registers */
+ aty_st_le32(DEFAULT_PITCH, pitch_value);
+
+ /* set the default scissor register to max dimensions */
+ aty_st_le32(DEFAULT_SC_BOTTOM_RIGHT, (0x1FFF << 16) | 0x1FFF);
+
+ /* set the drawing controls registers */
+ aty_st_le32(DP_GUI_MASTER_CNTL,
+ GMC_SRC_PITCH_OFFSET_DEFAULT |
+ GMC_DST_PITCH_OFFSET_DEFAULT |
+ GMC_SRC_CLIP_DEFAULT |
+ GMC_DST_CLIP_DEFAULT |
+ GMC_BRUSH_SOLIDCOLOR |
+ (depth_to_dst(par->crtc.depth) << 8) |
+ GMC_SRC_DSTCOLOR |
+ GMC_BYTE_ORDER_MSB_TO_LSB |
+ GMC_DP_CONVERSION_TEMP_6500 |
+ ROP3_PATCOPY |
+ GMC_DP_SRC_RECT |
+ GMC_3D_FCN_EN_CLR |
+ GMC_DST_CLR_CMP_FCN_CLEAR |
+ GMC_AUX_CLIP_CLEAR |
+ GMC_WRITE_MASK_SET);
+
+ wait_for_fifo(8, par);
+ /* clear the line drawing registers */
+ aty_st_le32(DST_BRES_ERR, 0);
+ aty_st_le32(DST_BRES_INC, 0);
+ aty_st_le32(DST_BRES_DEC, 0);
+
+ /* set brush color registers */
+ aty_st_le32(DP_BRUSH_FRGD_CLR, 0xFFFFFFFF); /* white */
+ aty_st_le32(DP_BRUSH_BKGD_CLR, 0x00000000); /* black */
+
+ /* set source color registers */
+ aty_st_le32(DP_SRC_FRGD_CLR, 0xFFFFFFFF); /* white */
+ aty_st_le32(DP_SRC_BKGD_CLR, 0x00000000); /* black */
+
+ /* default write mask */
+ aty_st_le32(DP_WRITE_MASK, 0xFFFFFFFF);
+
+ /* Wait for all the writes to be completed before returning */
+ wait_for_idle(par);
+}
+
+
+/* convert depth values to their register representation */
+static u32 depth_to_dst(u32 depth)
+{
+ if (depth <= 8)
+ return DST_8BPP;
+ else if (depth <= 15)
+ return DST_15BPP;
+ else if (depth == 16)
+ return DST_16BPP;
+ else if (depth <= 24)
+ return DST_24BPP;
+ else if (depth <= 32)
+ return DST_32BPP;
+
+ return -EINVAL;
+}
+
+/*
+ * PLL informations retreival
+ */
+
+
+#ifndef __sparc__
+static void __iomem *aty128_map_ROM(const struct aty128fb_par *par,
+ struct pci_dev *dev)
+{
+ u16 dptr;
+ u8 rom_type;
+ void __iomem *bios;
+ size_t rom_size;
+
+ /* Fix from ATI for problem with Rage128 hardware not leaving ROM enabled */
+ unsigned int temp;
+ temp = aty_ld_le32(RAGE128_MPP_TB_CONFIG);
+ temp &= 0x00ffffffu;
+ temp |= 0x04 << 24;
+ aty_st_le32(RAGE128_MPP_TB_CONFIG, temp);
+ temp = aty_ld_le32(RAGE128_MPP_TB_CONFIG);
+
+ bios = pci_map_rom(dev, &rom_size);
+
+ if (!bios) {
+ printk(KERN_ERR "aty128fb: ROM failed to map\n");
+ return NULL;
+ }
+
+ /* Very simple test to make sure it appeared */
+ if (BIOS_IN16(0) != 0xaa55) {
+ printk(KERN_DEBUG "aty128fb: Invalid ROM signature %x should "
+ " be 0xaa55\n", BIOS_IN16(0));
+ goto failed;
+ }
+
+ /* Look for the PCI data to check the ROM type */
+ dptr = BIOS_IN16(0x18);
+
+ /* Check the PCI data signature. If it's wrong, we still assume a normal
+ * x86 ROM for now, until I've verified this works everywhere.
+ * The goal here is more to phase out Open Firmware images.
+ *
+ * Currently, we only look at the first PCI data, we could iteratre and
+ * deal with them all, and we should use fb_bios_start relative to start
+ * of image and not relative start of ROM, but so far, I never found a
+ * dual-image ATI card.
+ *
+ * typedef struct {
+ * u32 signature; + 0x00
+ * u16 vendor; + 0x04
+ * u16 device; + 0x06
+ * u16 reserved_1; + 0x08
+ * u16 dlen; + 0x0a
+ * u8 drevision; + 0x0c
+ * u8 class_hi; + 0x0d
+ * u16 class_lo; + 0x0e
+ * u16 ilen; + 0x10
+ * u16 irevision; + 0x12
+ * u8 type; + 0x14
+ * u8 indicator; + 0x15
+ * u16 reserved_2; + 0x16
+ * } pci_data_t;
+ */
+ if (BIOS_IN32(dptr) != (('R' << 24) | ('I' << 16) | ('C' << 8) | 'P')) {
+ printk(KERN_WARNING "aty128fb: PCI DATA signature in ROM incorrect: %08x\n",
+ BIOS_IN32(dptr));
+ goto anyway;
+ }
+ rom_type = BIOS_IN8(dptr + 0x14);
+ switch(rom_type) {
+ case 0:
+ printk(KERN_INFO "aty128fb: Found Intel x86 BIOS ROM Image\n");
+ break;
+ case 1:
+ printk(KERN_INFO "aty128fb: Found Open Firmware ROM Image\n");
+ goto failed;
+ case 2:
+ printk(KERN_INFO "aty128fb: Found HP PA-RISC ROM Image\n");
+ goto failed;
+ default:
+ printk(KERN_INFO "aty128fb: Found unknown type %d ROM Image\n",
+ rom_type);
+ goto failed;
+ }
+ anyway:
+ return bios;
+
+ failed:
+ pci_unmap_rom(dev, bios);
+ return NULL;
+}
+
+static void aty128_get_pllinfo(struct aty128fb_par *par,
+ unsigned char __iomem *bios)
+{
+ unsigned int bios_hdr;
+ unsigned int bios_pll;
+
+ bios_hdr = BIOS_IN16(0x48);
+ bios_pll = BIOS_IN16(bios_hdr + 0x30);
+
+ par->constants.ppll_max = BIOS_IN32(bios_pll + 0x16);
+ par->constants.ppll_min = BIOS_IN32(bios_pll + 0x12);
+ par->constants.xclk = BIOS_IN16(bios_pll + 0x08);
+ par->constants.ref_divider = BIOS_IN16(bios_pll + 0x10);
+ par->constants.ref_clk = BIOS_IN16(bios_pll + 0x0e);
+
+ DBG("ppll_max %d ppll_min %d xclk %d ref_divider %d ref clock %d\n",
+ par->constants.ppll_max, par->constants.ppll_min,
+ par->constants.xclk, par->constants.ref_divider,
+ par->constants.ref_clk);
+
+}
+
+#ifdef CONFIG_X86
+static void __iomem *aty128_find_mem_vbios(struct aty128fb_par *par)
+{
+ /* I simplified this code as we used to miss the signatures in
+ * a lot of case. It's now closer to XFree, we just don't check
+ * for signatures at all... Something better will have to be done
+ * if we end up having conflicts
+ */
+ u32 segstart;
+ unsigned char __iomem *rom_base = NULL;
+
+ for (segstart=0x000c0000; segstart<0x000f0000; segstart+=0x00001000) {
+ rom_base = ioremap(segstart, 0x10000);
+ if (rom_base == NULL)
+ return NULL;
+ if (readb(rom_base) == 0x55 && readb(rom_base + 1) == 0xaa)
+ break;
+ iounmap(rom_base);
+ rom_base = NULL;
+ }
+ return rom_base;
+}
+#endif
+#endif /* ndef(__sparc__) */
+
+/* fill in known card constants if pll_block is not available */
+static void aty128_timings(struct aty128fb_par *par)
+{
+#ifdef CONFIG_PPC_OF
+ /* instead of a table lookup, assume OF has properly
+ * setup the PLL registers and use their values
+ * to set the XCLK values and reference divider values */
+
+ u32 x_mpll_ref_fb_div;
+ u32 xclk_cntl;
+ u32 Nx, M;
+ unsigned PostDivSet[] = { 0, 1, 2, 4, 8, 3, 6, 12 };
+#endif
+
+ if (!par->constants.ref_clk)
+ par->constants.ref_clk = 2950;
+
+#ifdef CONFIG_PPC_OF
+ x_mpll_ref_fb_div = aty_ld_pll(X_MPLL_REF_FB_DIV);
+ xclk_cntl = aty_ld_pll(XCLK_CNTL) & 0x7;
+ Nx = (x_mpll_ref_fb_div & 0x00ff00) >> 8;
+ M = x_mpll_ref_fb_div & 0x0000ff;
+
+ par->constants.xclk = round_div((2 * Nx * par->constants.ref_clk),
+ (M * PostDivSet[xclk_cntl]));
+
+ par->constants.ref_divider =
+ aty_ld_pll(PPLL_REF_DIV) & PPLL_REF_DIV_MASK;
+#endif
+
+ if (!par->constants.ref_divider) {
+ par->constants.ref_divider = 0x3b;
+
+ aty_st_pll(X_MPLL_REF_FB_DIV, 0x004c4c1e);
+ aty_pll_writeupdate(par);
+ }
+ aty_st_pll(PPLL_REF_DIV, par->constants.ref_divider);
+ aty_pll_writeupdate(par);
+
+ /* from documentation */
+ if (!par->constants.ppll_min)
+ par->constants.ppll_min = 12500;
+ if (!par->constants.ppll_max)
+ par->constants.ppll_max = 25000; /* 23000 on some cards? */
+ if (!par->constants.xclk)
+ par->constants.xclk = 0x1d4d; /* same as mclk */
+
+ par->constants.fifo_width = 128;
+ par->constants.fifo_depth = 32;
+
+ switch (aty_ld_le32(MEM_CNTL) & 0x3) {
+ case 0:
+ par->mem = &sdr_128;
+ break;
+ case 1:
+ par->mem = &sdr_sgram;
+ break;
+ case 2:
+ par->mem = &ddr_sgram;
+ break;
+ default:
+ par->mem = &sdr_sgram;
+ }
+}
+
+
+
+/*
+ * CRTC programming
+ */
+
+/* Program the CRTC registers */
+static void aty128_set_crtc(const struct aty128_crtc *crtc,
+ const struct aty128fb_par *par)
+{
+ aty_st_le32(CRTC_GEN_CNTL, crtc->gen_cntl);
+ aty_st_le32(CRTC_H_TOTAL_DISP, crtc->h_total);
+ aty_st_le32(CRTC_H_SYNC_STRT_WID, crtc->h_sync_strt_wid);
+ aty_st_le32(CRTC_V_TOTAL_DISP, crtc->v_total);
+ aty_st_le32(CRTC_V_SYNC_STRT_WID, crtc->v_sync_strt_wid);
+ aty_st_le32(CRTC_PITCH, crtc->pitch);
+ aty_st_le32(CRTC_OFFSET, crtc->offset);
+ aty_st_le32(CRTC_OFFSET_CNTL, crtc->offset_cntl);
+ /* Disable ATOMIC updating. Is this the right place? */
+ aty_st_pll(PPLL_CNTL, aty_ld_pll(PPLL_CNTL) & ~(0x00030000));
+}
+
+
+static int aty128_var_to_crtc(const struct fb_var_screeninfo *var,
+ struct aty128_crtc *crtc,
+ const struct aty128fb_par *par)
+{
+ u32 xres, yres, vxres, vyres, xoffset, yoffset, bpp, dst;
+ u32 left, right, upper, lower, hslen, vslen, sync, vmode;
+ u32 h_total, h_disp, h_sync_strt, h_sync_wid, h_sync_pol;
+ u32 v_total, v_disp, v_sync_strt, v_sync_wid, v_sync_pol, c_sync;
+ u32 depth, bytpp;
+ u8 mode_bytpp[7] = { 0, 0, 1, 2, 2, 3, 4 };
+
+ /* input */
+ xres = var->xres;
+ yres = var->yres;
+ vxres = var->xres_virtual;
+ vyres = var->yres_virtual;
+ xoffset = var->xoffset;
+ yoffset = var->yoffset;
+ bpp = var->bits_per_pixel;
+ left = var->left_margin;
+ right = var->right_margin;
+ upper = var->upper_margin;
+ lower = var->lower_margin;
+ hslen = var->hsync_len;
+ vslen = var->vsync_len;
+ sync = var->sync;
+ vmode = var->vmode;
+
+ if (bpp != 16)
+ depth = bpp;
+ else
+ depth = (var->green.length == 6) ? 16 : 15;
+
+ /* check for mode eligibility
+ * accept only non interlaced modes */
+ if ((vmode & FB_VMODE_MASK) != FB_VMODE_NONINTERLACED)
+ return -EINVAL;
+
+ /* convert (and round up) and validate */
+ xres = (xres + 7) & ~7;
+ xoffset = (xoffset + 7) & ~7;
+
+ if (vxres < xres + xoffset)
+ vxres = xres + xoffset;
+
+ if (vyres < yres + yoffset)
+ vyres = yres + yoffset;
+
+ /* convert depth into ATI register depth */
+ dst = depth_to_dst(depth);
+
+ if (dst == -EINVAL) {
+ printk(KERN_ERR "aty128fb: Invalid depth or RGBA\n");
+ return -EINVAL;
+ }
+
+ /* convert register depth to bytes per pixel */
+ bytpp = mode_bytpp[dst];
+
+ /* make sure there is enough video ram for the mode */
+ if ((u32)(vxres * vyres * bytpp) > par->vram_size) {
+ printk(KERN_ERR "aty128fb: Not enough memory for mode\n");
+ return -EINVAL;
+ }
+
+ h_disp = (xres >> 3) - 1;
+ h_total = (((xres + right + hslen + left) >> 3) - 1) & 0xFFFFL;
+
+ v_disp = yres - 1;
+ v_total = (yres + upper + vslen + lower - 1) & 0xFFFFL;
+
+ /* check to make sure h_total and v_total are in range */
+ if (((h_total >> 3) - 1) > 0x1ff || (v_total - 1) > 0x7FF) {
+ printk(KERN_ERR "aty128fb: invalid width ranges\n");
+ return -EINVAL;
+ }
+
+ h_sync_wid = (hslen + 7) >> 3;
+ if (h_sync_wid == 0)
+ h_sync_wid = 1;
+ else if (h_sync_wid > 0x3f) /* 0x3f = max hwidth */
+ h_sync_wid = 0x3f;
+
+ h_sync_strt = (h_disp << 3) + right;
+
+ v_sync_wid = vslen;
+ if (v_sync_wid == 0)
+ v_sync_wid = 1;
+ else if (v_sync_wid > 0x1f) /* 0x1f = max vwidth */
+ v_sync_wid = 0x1f;
+
+ v_sync_strt = v_disp + lower;
+
+ h_sync_pol = sync & FB_SYNC_HOR_HIGH_ACT ? 0 : 1;
+ v_sync_pol = sync & FB_SYNC_VERT_HIGH_ACT ? 0 : 1;
+
+ c_sync = sync & FB_SYNC_COMP_HIGH_ACT ? (1 << 4) : 0;
+
+ crtc->gen_cntl = 0x3000000L | c_sync | (dst << 8);
+
+ crtc->h_total = h_total | (h_disp << 16);
+ crtc->v_total = v_total | (v_disp << 16);
+
+ crtc->h_sync_strt_wid = h_sync_strt | (h_sync_wid << 16) |
+ (h_sync_pol << 23);
+ crtc->v_sync_strt_wid = v_sync_strt | (v_sync_wid << 16) |
+ (v_sync_pol << 23);
+
+ crtc->pitch = vxres >> 3;
+
+ crtc->offset = 0;
+
+ if ((var->activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_NOW)
+ crtc->offset_cntl = 0x00010000;
+ else
+ crtc->offset_cntl = 0;
+
+ crtc->vxres = vxres;
+ crtc->vyres = vyres;
+ crtc->xoffset = xoffset;
+ crtc->yoffset = yoffset;
+ crtc->depth = depth;
+ crtc->bpp = bpp;
+
+ return 0;
+}
+
+
+static int aty128_pix_width_to_var(int pix_width, struct fb_var_screeninfo *var)
+{
+
+ /* fill in pixel info */
+ var->red.msb_right = 0;
+ var->green.msb_right = 0;
+ var->blue.offset = 0;
+ var->blue.msb_right = 0;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ var->transp.msb_right = 0;
+ switch (pix_width) {
+ case CRTC_PIX_WIDTH_8BPP:
+ var->bits_per_pixel = 8;
+ var->red.offset = 0;
+ var->red.length = 8;
+ var->green.offset = 0;
+ var->green.length = 8;
+ var->blue.length = 8;
+ break;
+ case CRTC_PIX_WIDTH_15BPP:
+ var->bits_per_pixel = 16;
+ var->red.offset = 10;
+ var->red.length = 5;
+ var->green.offset = 5;
+ var->green.length = 5;
+ var->blue.length = 5;
+ break;
+ case CRTC_PIX_WIDTH_16BPP:
+ var->bits_per_pixel = 16;
+ var->red.offset = 11;
+ var->red.length = 5;
+ var->green.offset = 5;
+ var->green.length = 6;
+ var->blue.length = 5;
+ break;
+ case CRTC_PIX_WIDTH_24BPP:
+ var->bits_per_pixel = 24;
+ var->red.offset = 16;
+ var->red.length = 8;
+ var->green.offset = 8;
+ var->green.length = 8;
+ var->blue.length = 8;
+ break;
+ case CRTC_PIX_WIDTH_32BPP:
+ var->bits_per_pixel = 32;
+ var->red.offset = 16;
+ var->red.length = 8;
+ var->green.offset = 8;
+ var->green.length = 8;
+ var->blue.length = 8;
+ var->transp.offset = 24;
+ var->transp.length = 8;
+ break;
+ default:
+ printk(KERN_ERR "aty128fb: Invalid pixel width\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+
+static int aty128_crtc_to_var(const struct aty128_crtc *crtc,
+ struct fb_var_screeninfo *var)
+{
+ u32 xres, yres, left, right, upper, lower, hslen, vslen, sync;
+ u32 h_total, h_disp, h_sync_strt, h_sync_dly, h_sync_wid, h_sync_pol;
+ u32 v_total, v_disp, v_sync_strt, v_sync_wid, v_sync_pol, c_sync;
+ u32 pix_width;
+
+ /* fun with masking */
+ h_total = crtc->h_total & 0x1ff;
+ h_disp = (crtc->h_total >> 16) & 0xff;
+ h_sync_strt = (crtc->h_sync_strt_wid >> 3) & 0x1ff;
+ h_sync_dly = crtc->h_sync_strt_wid & 0x7;
+ h_sync_wid = (crtc->h_sync_strt_wid >> 16) & 0x3f;
+ h_sync_pol = (crtc->h_sync_strt_wid >> 23) & 0x1;
+ v_total = crtc->v_total & 0x7ff;
+ v_disp = (crtc->v_total >> 16) & 0x7ff;
+ v_sync_strt = crtc->v_sync_strt_wid & 0x7ff;
+ v_sync_wid = (crtc->v_sync_strt_wid >> 16) & 0x1f;
+ v_sync_pol = (crtc->v_sync_strt_wid >> 23) & 0x1;
+ c_sync = crtc->gen_cntl & CRTC_CSYNC_EN ? 1 : 0;
+ pix_width = crtc->gen_cntl & CRTC_PIX_WIDTH_MASK;
+
+ /* do conversions */
+ xres = (h_disp + 1) << 3;
+ yres = v_disp + 1;
+ left = ((h_total - h_sync_strt - h_sync_wid) << 3) - h_sync_dly;
+ right = ((h_sync_strt - h_disp) << 3) + h_sync_dly;
+ hslen = h_sync_wid << 3;
+ upper = v_total - v_sync_strt - v_sync_wid;
+ lower = v_sync_strt - v_disp;
+ vslen = v_sync_wid;
+ sync = (h_sync_pol ? 0 : FB_SYNC_HOR_HIGH_ACT) |
+ (v_sync_pol ? 0 : FB_SYNC_VERT_HIGH_ACT) |
+ (c_sync ? FB_SYNC_COMP_HIGH_ACT : 0);
+
+ aty128_pix_width_to_var(pix_width, var);
+
+ var->xres = xres;
+ var->yres = yres;
+ var->xres_virtual = crtc->vxres;
+ var->yres_virtual = crtc->vyres;
+ var->xoffset = crtc->xoffset;
+ var->yoffset = crtc->yoffset;
+ var->left_margin = left;
+ var->right_margin = right;
+ var->upper_margin = upper;
+ var->lower_margin = lower;
+ var->hsync_len = hslen;
+ var->vsync_len = vslen;
+ var->sync = sync;
+ var->vmode = FB_VMODE_NONINTERLACED;
+
+ return 0;
+}
+
+static void aty128_set_crt_enable(struct aty128fb_par *par, int on)
+{
+ if (on) {
+ aty_st_le32(CRTC_EXT_CNTL, aty_ld_le32(CRTC_EXT_CNTL) |
+ CRT_CRTC_ON);
+ aty_st_le32(DAC_CNTL, (aty_ld_le32(DAC_CNTL) |
+ DAC_PALETTE2_SNOOP_EN));
+ } else
+ aty_st_le32(CRTC_EXT_CNTL, aty_ld_le32(CRTC_EXT_CNTL) &
+ ~CRT_CRTC_ON);
+}
+
+static void aty128_set_lcd_enable(struct aty128fb_par *par, int on)
+{
+ u32 reg;
+#ifdef CONFIG_FB_ATY128_BACKLIGHT
+ struct fb_info *info = pci_get_drvdata(par->pdev);
+#endif
+
+ if (on) {
+ reg = aty_ld_le32(LVDS_GEN_CNTL);
+ reg |= LVDS_ON | LVDS_EN | LVDS_BLON | LVDS_DIGION;
+ reg &= ~LVDS_DISPLAY_DIS;
+ aty_st_le32(LVDS_GEN_CNTL, reg);
+#ifdef CONFIG_FB_ATY128_BACKLIGHT
+ aty128_bl_set_power(info, FB_BLANK_UNBLANK);
+#endif
+ } else {
+#ifdef CONFIG_FB_ATY128_BACKLIGHT
+ aty128_bl_set_power(info, FB_BLANK_POWERDOWN);
+#endif
+ reg = aty_ld_le32(LVDS_GEN_CNTL);
+ reg |= LVDS_DISPLAY_DIS;
+ aty_st_le32(LVDS_GEN_CNTL, reg);
+ mdelay(100);
+ reg &= ~(LVDS_ON /*| LVDS_EN*/);
+ aty_st_le32(LVDS_GEN_CNTL, reg);
+ }
+}
+
+static void aty128_set_pll(struct aty128_pll *pll,
+ const struct aty128fb_par *par)
+{
+ u32 div3;
+
+ unsigned char post_conv[] = /* register values for post dividers */
+ { 2, 0, 1, 4, 2, 2, 6, 2, 3, 2, 2, 2, 7 };
+
+ /* select PPLL_DIV_3 */
+ aty_st_le32(CLOCK_CNTL_INDEX, aty_ld_le32(CLOCK_CNTL_INDEX) | (3 << 8));
+
+ /* reset PLL */
+ aty_st_pll(PPLL_CNTL,
+ aty_ld_pll(PPLL_CNTL) | PPLL_RESET | PPLL_ATOMIC_UPDATE_EN);
+
+ /* write the reference divider */
+ aty_pll_wait_readupdate(par);
+ aty_st_pll(PPLL_REF_DIV, par->constants.ref_divider & 0x3ff);
+ aty_pll_writeupdate(par);
+
+ div3 = aty_ld_pll(PPLL_DIV_3);
+ div3 &= ~PPLL_FB3_DIV_MASK;
+ div3 |= pll->feedback_divider;
+ div3 &= ~PPLL_POST3_DIV_MASK;
+ div3 |= post_conv[pll->post_divider] << 16;
+
+ /* write feedback and post dividers */
+ aty_pll_wait_readupdate(par);
+ aty_st_pll(PPLL_DIV_3, div3);
+ aty_pll_writeupdate(par);
+
+ aty_pll_wait_readupdate(par);
+ aty_st_pll(HTOTAL_CNTL, 0); /* no horiz crtc adjustment */
+ aty_pll_writeupdate(par);
+
+ /* clear the reset, just in case */
+ aty_st_pll(PPLL_CNTL, aty_ld_pll(PPLL_CNTL) & ~PPLL_RESET);
+}
+
+
+static int aty128_var_to_pll(u32 period_in_ps, struct aty128_pll *pll,
+ const struct aty128fb_par *par)
+{
+ const struct aty128_constants c = par->constants;
+ unsigned char post_dividers[] = {1,2,4,8,3,6,12};
+ u32 output_freq;
+ u32 vclk; /* in .01 MHz */
+ int i = 0;
+ u32 n, d;
+
+ vclk = 100000000 / period_in_ps; /* convert units to 10 kHz */
+
+ /* adjust pixel clock if necessary */
+ if (vclk > c.ppll_max)
+ vclk = c.ppll_max;
+ if (vclk * 12 < c.ppll_min)
+ vclk = c.ppll_min/12;
+
+ /* now, find an acceptable divider */
+ for (i = 0; i < ARRAY_SIZE(post_dividers); i++) {
+ output_freq = post_dividers[i] * vclk;
+ if (output_freq >= c.ppll_min && output_freq <= c.ppll_max) {
+ pll->post_divider = post_dividers[i];
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(post_dividers))
+ return -EINVAL;
+
+ /* calculate feedback divider */
+ n = c.ref_divider * output_freq;
+ d = c.ref_clk;
+
+ pll->feedback_divider = round_div(n, d);
+ pll->vclk = vclk;
+
+ DBG("post %d feedback %d vlck %d output %d ref_divider %d "
+ "vclk_per: %d\n", pll->post_divider,
+ pll->feedback_divider, vclk, output_freq,
+ c.ref_divider, period_in_ps);
+
+ return 0;
+}
+
+
+static int aty128_pll_to_var(const struct aty128_pll *pll,
+ struct fb_var_screeninfo *var)
+{
+ var->pixclock = 100000000 / pll->vclk;
+
+ return 0;
+}
+
+
+static void aty128_set_fifo(const struct aty128_ddafifo *dsp,
+ const struct aty128fb_par *par)
+{
+ aty_st_le32(DDA_CONFIG, dsp->dda_config);
+ aty_st_le32(DDA_ON_OFF, dsp->dda_on_off);
+}
+
+
+static int aty128_ddafifo(struct aty128_ddafifo *dsp,
+ const struct aty128_pll *pll,
+ u32 depth,
+ const struct aty128fb_par *par)
+{
+ const struct aty128_meminfo *m = par->mem;
+ u32 xclk = par->constants.xclk;
+ u32 fifo_width = par->constants.fifo_width;
+ u32 fifo_depth = par->constants.fifo_depth;
+ s32 x, b, p, ron, roff;
+ u32 n, d, bpp;
+
+ /* round up to multiple of 8 */
+ bpp = (depth+7) & ~7;
+
+ n = xclk * fifo_width;
+ d = pll->vclk * bpp;
+ x = round_div(n, d);
+
+ ron = 4 * m->MB +
+ 3 * ((m->Trcd - 2 > 0) ? m->Trcd - 2 : 0) +
+ 2 * m->Trp +
+ m->Twr +
+ m->CL +
+ m->Tr2w +
+ x;
+
+ DBG("x %x\n", x);
+
+ b = 0;
+ while (x) {
+ x >>= 1;
+ b++;
+ }
+ p = b + 1;
+
+ ron <<= (11 - p);
+
+ n <<= (11 - p);
+ x = round_div(n, d);
+ roff = x * (fifo_depth - 4);
+
+ if ((ron + m->Rloop) >= roff) {
+ printk(KERN_ERR "aty128fb: Mode out of range!\n");
+ return -EINVAL;
+ }
+
+ DBG("p: %x rloop: %x x: %x ron: %x roff: %x\n",
+ p, m->Rloop, x, ron, roff);
+
+ dsp->dda_config = p << 16 | m->Rloop << 20 | x;
+ dsp->dda_on_off = ron << 16 | roff;
+
+ return 0;
+}
+
+
+/*
+ * This actually sets the video mode.
+ */
+static int aty128fb_set_par(struct fb_info *info)
+{
+ struct aty128fb_par *par = info->par;
+ u32 config;
+ int err;
+
+ if ((err = aty128_decode_var(&info->var, par)) != 0)
+ return err;
+
+ if (par->blitter_may_be_busy)
+ wait_for_idle(par);
+
+ /* clear all registers that may interfere with mode setting */
+ aty_st_le32(OVR_CLR, 0);
+ aty_st_le32(OVR_WID_LEFT_RIGHT, 0);
+ aty_st_le32(OVR_WID_TOP_BOTTOM, 0);
+ aty_st_le32(OV0_SCALE_CNTL, 0);
+ aty_st_le32(MPP_TB_CONFIG, 0);
+ aty_st_le32(MPP_GP_CONFIG, 0);
+ aty_st_le32(SUBPIC_CNTL, 0);
+ aty_st_le32(VIPH_CONTROL, 0);
+ aty_st_le32(I2C_CNTL_1, 0); /* turn off i2c */
+ aty_st_le32(GEN_INT_CNTL, 0); /* turn off interrupts */
+ aty_st_le32(CAP0_TRIG_CNTL, 0);
+ aty_st_le32(CAP1_TRIG_CNTL, 0);
+
+ aty_st_8(CRTC_EXT_CNTL + 1, 4); /* turn video off */
+
+ aty128_set_crtc(&par->crtc, par);
+ aty128_set_pll(&par->pll, par);
+ aty128_set_fifo(&par->fifo_reg, par);
+
+ config = aty_ld_le32(CNFG_CNTL) & ~3;
+
+#if defined(__BIG_ENDIAN)
+ if (par->crtc.bpp == 32)
+ config |= 2; /* make aperture do 32 bit swapping */
+ else if (par->crtc.bpp == 16)
+ config |= 1; /* make aperture do 16 bit swapping */
+#endif
+
+ aty_st_le32(CNFG_CNTL, config);
+ aty_st_8(CRTC_EXT_CNTL + 1, 0); /* turn the video back on */
+
+ info->fix.line_length = (par->crtc.vxres * par->crtc.bpp) >> 3;
+ info->fix.visual = par->crtc.bpp == 8 ? FB_VISUAL_PSEUDOCOLOR
+ : FB_VISUAL_DIRECTCOLOR;
+
+ if (par->chip_gen == rage_M3) {
+ aty128_set_crt_enable(par, par->crt_on);
+ aty128_set_lcd_enable(par, par->lcd_on);
+ }
+ if (par->accel_flags & FB_ACCELF_TEXT)
+ aty128_init_engine(par);
+
+#ifdef CONFIG_BOOTX_TEXT
+ btext_update_display(info->fix.smem_start,
+ (((par->crtc.h_total>>16) & 0xff)+1)*8,
+ ((par->crtc.v_total>>16) & 0x7ff)+1,
+ par->crtc.bpp,
+ par->crtc.vxres*par->crtc.bpp/8);
+#endif /* CONFIG_BOOTX_TEXT */
+
+ return 0;
+}
+
+/*
+ * encode/decode the User Defined Part of the Display
+ */
+
+static int aty128_decode_var(struct fb_var_screeninfo *var,
+ struct aty128fb_par *par)
+{
+ int err;
+ struct aty128_crtc crtc;
+ struct aty128_pll pll;
+ struct aty128_ddafifo fifo_reg;
+
+ if ((err = aty128_var_to_crtc(var, &crtc, par)))
+ return err;
+
+ if ((err = aty128_var_to_pll(var->pixclock, &pll, par)))
+ return err;
+
+ if ((err = aty128_ddafifo(&fifo_reg, &pll, crtc.depth, par)))
+ return err;
+
+ par->crtc = crtc;
+ par->pll = pll;
+ par->fifo_reg = fifo_reg;
+ par->accel_flags = var->accel_flags;
+
+ return 0;
+}
+
+
+static int aty128_encode_var(struct fb_var_screeninfo *var,
+ const struct aty128fb_par *par)
+{
+ int err;
+
+ if ((err = aty128_crtc_to_var(&par->crtc, var)))
+ return err;
+
+ if ((err = aty128_pll_to_var(&par->pll, var)))
+ return err;
+
+ var->nonstd = 0;
+ var->activate = 0;
+
+ var->height = -1;
+ var->width = -1;
+ var->accel_flags = par->accel_flags;
+
+ return 0;
+}
+
+
+static int aty128fb_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ struct aty128fb_par par;
+ int err;
+
+ par = *(struct aty128fb_par *)info->par;
+ if ((err = aty128_decode_var(var, &par)) != 0)
+ return err;
+ aty128_encode_var(var, &par);
+ return 0;
+}
+
+
+/*
+ * Pan or Wrap the Display
+ */
+static int aty128fb_pan_display(struct fb_var_screeninfo *var,
+ struct fb_info *fb)
+{
+ struct aty128fb_par *par = fb->par;
+ u32 xoffset, yoffset;
+ u32 offset;
+ u32 xres, yres;
+
+ xres = (((par->crtc.h_total >> 16) & 0xff) + 1) << 3;
+ yres = ((par->crtc.v_total >> 16) & 0x7ff) + 1;
+
+ xoffset = (var->xoffset +7) & ~7;
+ yoffset = var->yoffset;
+
+ if (xoffset+xres > par->crtc.vxres || yoffset+yres > par->crtc.vyres)
+ return -EINVAL;
+
+ par->crtc.xoffset = xoffset;
+ par->crtc.yoffset = yoffset;
+
+ offset = ((yoffset * par->crtc.vxres + xoffset) * (par->crtc.bpp >> 3))
+ & ~7;
+
+ if (par->crtc.bpp == 24)
+ offset += 8 * (offset % 3); /* Must be multiple of 8 and 3 */
+
+ aty_st_le32(CRTC_OFFSET, offset);
+
+ return 0;
+}
+
+
+/*
+ * Helper function to store a single palette register
+ */
+static void aty128_st_pal(u_int regno, u_int red, u_int green, u_int blue,
+ struct aty128fb_par *par)
+{
+ if (par->chip_gen == rage_M3) {
+#if 0
+ /* Note: For now, on M3, we set palette on both heads, which may
+ * be useless. Can someone with a M3 check this ?
+ *
+ * This code would still be useful if using the second CRTC to
+ * do mirroring
+ */
+
+ aty_st_le32(DAC_CNTL, aty_ld_le32(DAC_CNTL) |
+ DAC_PALETTE_ACCESS_CNTL);
+ aty_st_8(PALETTE_INDEX, regno);
+ aty_st_le32(PALETTE_DATA, (red<<16)|(green<<8)|blue);
+#endif
+ aty_st_le32(DAC_CNTL, aty_ld_le32(DAC_CNTL) &
+ ~DAC_PALETTE_ACCESS_CNTL);
+ }
+
+ aty_st_8(PALETTE_INDEX, regno);
+ aty_st_le32(PALETTE_DATA, (red<<16)|(green<<8)|blue);
+}
+
+static int aty128fb_sync(struct fb_info *info)
+{
+ struct aty128fb_par *par = info->par;
+
+ if (par->blitter_may_be_busy)
+ wait_for_idle(par);
+ return 0;
+}
+
+#ifndef MODULE
+static int aty128fb_setup(char *options)
+{
+ char *this_opt;
+
+ if (!options || !*options)
+ return 0;
+
+ while ((this_opt = strsep(&options, ",")) != NULL) {
+ if (!strncmp(this_opt, "lcd:", 4)) {
+ default_lcd_on = simple_strtoul(this_opt+4, NULL, 0);
+ continue;
+ } else if (!strncmp(this_opt, "crt:", 4)) {
+ default_crt_on = simple_strtoul(this_opt+4, NULL, 0);
+ continue;
+ } else if (!strncmp(this_opt, "backlight:", 10)) {
+#ifdef CONFIG_FB_ATY128_BACKLIGHT
+ backlight = simple_strtoul(this_opt+10, NULL, 0);
+#endif
+ continue;
+ }
+#ifdef CONFIG_MTRR
+ if(!strncmp(this_opt, "nomtrr", 6)) {
+ mtrr = 0;
+ continue;
+ }
+#endif
+#ifdef CONFIG_PPC_PMAC
+ /* vmode and cmode deprecated */
+ if (!strncmp(this_opt, "vmode:", 6)) {
+ unsigned int vmode = simple_strtoul(this_opt+6, NULL, 0);
+ if (vmode > 0 && vmode <= VMODE_MAX)
+ default_vmode = vmode;
+ continue;
+ } else if (!strncmp(this_opt, "cmode:", 6)) {
+ unsigned int cmode = simple_strtoul(this_opt+6, NULL, 0);
+ switch (cmode) {
+ case 0:
+ case 8:
+ default_cmode = CMODE_8;
+ break;
+ case 15:
+ case 16:
+ default_cmode = CMODE_16;
+ break;
+ case 24:
+ case 32:
+ default_cmode = CMODE_32;
+ break;
+ }
+ continue;
+ }
+#endif /* CONFIG_PPC_PMAC */
+ mode_option = this_opt;
+ }
+ return 0;
+}
+#endif /* MODULE */
+
+/* Backlight */
+#ifdef CONFIG_FB_ATY128_BACKLIGHT
+#define MAX_LEVEL 0xFF
+
+static int aty128_bl_get_level_brightness(struct aty128fb_par *par,
+ int level)
+{
+ struct fb_info *info = pci_get_drvdata(par->pdev);
+ int atylevel;
+
+ /* Get and convert the value */
+ /* No locking of bl_curve since we read a single value */
+ atylevel = MAX_LEVEL -
+ (info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL);
+
+ if (atylevel < 0)
+ atylevel = 0;
+ else if (atylevel > MAX_LEVEL)
+ atylevel = MAX_LEVEL;
+
+ return atylevel;
+}
+
+/* We turn off the LCD completely instead of just dimming the backlight.
+ * This provides greater power saving and the display is useless without
+ * backlight anyway
+ */
+#define BACKLIGHT_LVDS_OFF
+/* That one prevents proper CRT output with LCD off */
+#undef BACKLIGHT_DAC_OFF
+
+static int aty128_bl_update_status(struct backlight_device *bd)
+{
+ struct aty128fb_par *par = bl_get_data(bd);
+ unsigned int reg = aty_ld_le32(LVDS_GEN_CNTL);
+ int level;
+
+ if (bd->props.power != FB_BLANK_UNBLANK ||
+ bd->props.fb_blank != FB_BLANK_UNBLANK ||
+ !par->lcd_on)
+ level = 0;
+ else
+ level = bd->props.brightness;
+
+ reg |= LVDS_BL_MOD_EN | LVDS_BLON;
+ if (level > 0) {
+ reg |= LVDS_DIGION;
+ if (!(reg & LVDS_ON)) {
+ reg &= ~LVDS_BLON;
+ aty_st_le32(LVDS_GEN_CNTL, reg);
+ aty_ld_le32(LVDS_GEN_CNTL);
+ mdelay(10);
+ reg |= LVDS_BLON;
+ aty_st_le32(LVDS_GEN_CNTL, reg);
+ }
+ reg &= ~LVDS_BL_MOD_LEVEL_MASK;
+ reg |= (aty128_bl_get_level_brightness(par, level) <<
+ LVDS_BL_MOD_LEVEL_SHIFT);
+#ifdef BACKLIGHT_LVDS_OFF
+ reg |= LVDS_ON | LVDS_EN;
+ reg &= ~LVDS_DISPLAY_DIS;
+#endif
+ aty_st_le32(LVDS_GEN_CNTL, reg);
+#ifdef BACKLIGHT_DAC_OFF
+ aty_st_le32(DAC_CNTL, aty_ld_le32(DAC_CNTL) & (~DAC_PDWN));
+#endif
+ } else {
+ reg &= ~LVDS_BL_MOD_LEVEL_MASK;
+ reg |= (aty128_bl_get_level_brightness(par, 0) <<
+ LVDS_BL_MOD_LEVEL_SHIFT);
+#ifdef BACKLIGHT_LVDS_OFF
+ reg |= LVDS_DISPLAY_DIS;
+ aty_st_le32(LVDS_GEN_CNTL, reg);
+ aty_ld_le32(LVDS_GEN_CNTL);
+ udelay(10);
+ reg &= ~(LVDS_ON | LVDS_EN | LVDS_BLON | LVDS_DIGION);
+#endif
+ aty_st_le32(LVDS_GEN_CNTL, reg);
+#ifdef BACKLIGHT_DAC_OFF
+ aty_st_le32(DAC_CNTL, aty_ld_le32(DAC_CNTL) | DAC_PDWN);
+#endif
+ }
+
+ return 0;
+}
+
+static int aty128_bl_get_brightness(struct backlight_device *bd)
+{
+ return bd->props.brightness;
+}
+
+static const struct backlight_ops aty128_bl_data = {
+ .get_brightness = aty128_bl_get_brightness,
+ .update_status = aty128_bl_update_status,
+};
+
+static void aty128_bl_set_power(struct fb_info *info, int power)
+{
+ if (info->bl_dev) {
+ info->bl_dev->props.power = power;
+ backlight_update_status(info->bl_dev);
+ }
+}
+
+static void aty128_bl_init(struct aty128fb_par *par)
+{
+ struct backlight_properties props;
+ struct fb_info *info = pci_get_drvdata(par->pdev);
+ struct backlight_device *bd;
+ char name[12];
+
+ /* Could be extended to Rage128Pro LVDS output too */
+ if (par->chip_gen != rage_M3)
+ return;
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+ if (!pmac_has_backlight_type("ati"))
+ return;
+#endif
+
+ snprintf(name, sizeof(name), "aty128bl%d", info->node);
+
+ memset(&props, 0, sizeof(struct backlight_properties));
+ props.type = BACKLIGHT_RAW;
+ props.max_brightness = FB_BACKLIGHT_LEVELS - 1;
+ bd = backlight_device_register(name, info->dev, par, &aty128_bl_data,
+ &props);
+ if (IS_ERR(bd)) {
+ info->bl_dev = NULL;
+ printk(KERN_WARNING "aty128: Backlight registration failed\n");
+ goto error;
+ }
+
+ info->bl_dev = bd;
+ fb_bl_default_curve(info, 0,
+ 63 * FB_BACKLIGHT_MAX / MAX_LEVEL,
+ 219 * FB_BACKLIGHT_MAX / MAX_LEVEL);
+
+ bd->props.brightness = bd->props.max_brightness;
+ bd->props.power = FB_BLANK_UNBLANK;
+ backlight_update_status(bd);
+
+ printk("aty128: Backlight initialized (%s)\n", name);
+
+ return;
+
+error:
+ return;
+}
+
+static void aty128_bl_exit(struct backlight_device *bd)
+{
+ backlight_device_unregister(bd);
+ printk("aty128: Backlight unloaded\n");
+}
+#endif /* CONFIG_FB_ATY128_BACKLIGHT */
+
+/*
+ * Initialisation
+ */
+
+#ifdef CONFIG_PPC_PMAC__disabled
+static void aty128_early_resume(void *data)
+{
+ struct aty128fb_par *par = data;
+
+ if (!console_trylock())
+ return;
+ pci_restore_state(par->pdev);
+ aty128_do_resume(par->pdev);
+ console_unlock();
+}
+#endif /* CONFIG_PPC_PMAC */
+
+static int aty128_init(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ struct fb_info *info = pci_get_drvdata(pdev);
+ struct aty128fb_par *par = info->par;
+ struct fb_var_screeninfo var;
+ char video_card[50];
+ u8 chip_rev;
+ u32 dac;
+
+ /* Get the chip revision */
+ chip_rev = (aty_ld_le32(CNFG_CNTL) >> 16) & 0x1F;
+
+ strcpy(video_card, "Rage128 XX ");
+ video_card[8] = ent->device >> 8;
+ video_card[9] = ent->device & 0xFF;
+
+ /* range check to make sure */
+ if (ent->driver_data < ARRAY_SIZE(r128_family))
+ strlcat(video_card, r128_family[ent->driver_data],
+ sizeof(video_card));
+
+ printk(KERN_INFO "aty128fb: %s [chip rev 0x%x] ", video_card, chip_rev);
+
+ if (par->vram_size % (1024 * 1024) == 0)
+ printk("%dM %s\n", par->vram_size / (1024*1024), par->mem->name);
+ else
+ printk("%dk %s\n", par->vram_size / 1024, par->mem->name);
+
+ par->chip_gen = ent->driver_data;
+
+ /* fill in info */
+ info->fbops = &aty128fb_ops;
+ info->flags = FBINFO_FLAG_DEFAULT;
+
+ par->lcd_on = default_lcd_on;
+ par->crt_on = default_crt_on;
+
+ var = default_var;
+#ifdef CONFIG_PPC_PMAC
+ if (machine_is(powermac)) {
+ /* Indicate sleep capability */
+ if (par->chip_gen == rage_M3) {
+ pmac_call_feature(PMAC_FTR_DEVICE_CAN_WAKE, NULL, 0, 1);
+#if 0 /* Disable the early video resume hack for now as it's causing problems,
+ * among others we now rely on the PCI core restoring the config space
+ * for us, which isn't the case with that hack, and that code path causes
+ * various things to be called with interrupts off while they shouldn't.
+ * I'm leaving the code in as it can be useful for debugging purposes
+ */
+ pmac_set_early_video_resume(aty128_early_resume, par);
+#endif
+ }
+
+ /* Find default mode */
+ if (mode_option) {
+ if (!mac_find_mode(&var, info, mode_option, 8))
+ var = default_var;
+ } else {
+ if (default_vmode <= 0 || default_vmode > VMODE_MAX)
+ default_vmode = VMODE_1024_768_60;
+
+ /* iMacs need that resolution
+ * PowerMac2,1 first r128 iMacs
+ * PowerMac2,2 summer 2000 iMacs
+ * PowerMac4,1 january 2001 iMacs "flower power"
+ */
+ if (of_machine_is_compatible("PowerMac2,1") ||
+ of_machine_is_compatible("PowerMac2,2") ||
+ of_machine_is_compatible("PowerMac4,1"))
+ default_vmode = VMODE_1024_768_75;
+
+ /* iBook SE */
+ if (of_machine_is_compatible("PowerBook2,2"))
+ default_vmode = VMODE_800_600_60;
+
+ /* PowerBook Firewire (Pismo), iBook Dual USB */
+ if (of_machine_is_compatible("PowerBook3,1") ||
+ of_machine_is_compatible("PowerBook4,1"))
+ default_vmode = VMODE_1024_768_60;
+
+ /* PowerBook Titanium */
+ if (of_machine_is_compatible("PowerBook3,2"))
+ default_vmode = VMODE_1152_768_60;
+
+ if (default_cmode > 16)
+ default_cmode = CMODE_32;
+ else if (default_cmode > 8)
+ default_cmode = CMODE_16;
+ else
+ default_cmode = CMODE_8;
+
+ if (mac_vmode_to_var(default_vmode, default_cmode, &var))
+ var = default_var;
+ }
+ } else
+#endif /* CONFIG_PPC_PMAC */
+ {
+ if (mode_option)
+ if (fb_find_mode(&var, info, mode_option, NULL,
+ 0, &defaultmode, 8) == 0)
+ var = default_var;
+ }
+
+ var.accel_flags &= ~FB_ACCELF_TEXT;
+// var.accel_flags |= FB_ACCELF_TEXT;/* FIXME Will add accel later */
+
+ if (aty128fb_check_var(&var, info)) {
+ printk(KERN_ERR "aty128fb: Cannot set default mode.\n");
+ return 0;
+ }
+
+ /* setup the DAC the way we like it */
+ dac = aty_ld_le32(DAC_CNTL);
+ dac |= (DAC_8BIT_EN | DAC_RANGE_CNTL);
+ dac |= DAC_MASK;
+ if (par->chip_gen == rage_M3)
+ dac |= DAC_PALETTE2_SNOOP_EN;
+ aty_st_le32(DAC_CNTL, dac);
+
+ /* turn off bus mastering, just in case */
+ aty_st_le32(BUS_CNTL, aty_ld_le32(BUS_CNTL) | BUS_MASTER_DIS);
+
+ info->var = var;
+ fb_alloc_cmap(&info->cmap, 256, 0);
+
+ var.activate = FB_ACTIVATE_NOW;
+
+ aty128_init_engine(par);
+
+ par->pdev = pdev;
+ par->asleep = 0;
+ par->lock_blank = 0;
+
+#ifdef CONFIG_FB_ATY128_BACKLIGHT
+ if (backlight)
+ aty128_bl_init(par);
+#endif
+
+ if (register_framebuffer(info) < 0)
+ return 0;
+
+ fb_info(info, "%s frame buffer device on %s\n",
+ info->fix.id, video_card);
+
+ return 1; /* success! */
+}
+
+#ifdef CONFIG_PCI
+/* register a card ++ajoshi */
+static int aty128_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ unsigned long fb_addr, reg_addr;
+ struct aty128fb_par *par;
+ struct fb_info *info;
+ int err;
+#ifndef __sparc__
+ void __iomem *bios = NULL;
+#endif
+
+ /* Enable device in PCI config */
+ if ((err = pci_enable_device(pdev))) {
+ printk(KERN_ERR "aty128fb: Cannot enable PCI device: %d\n",
+ err);
+ return -ENODEV;
+ }
+
+ fb_addr = pci_resource_start(pdev, 0);
+ if (!request_mem_region(fb_addr, pci_resource_len(pdev, 0),
+ "aty128fb FB")) {
+ printk(KERN_ERR "aty128fb: cannot reserve frame "
+ "buffer memory\n");
+ return -ENODEV;
+ }
+
+ reg_addr = pci_resource_start(pdev, 2);
+ if (!request_mem_region(reg_addr, pci_resource_len(pdev, 2),
+ "aty128fb MMIO")) {
+ printk(KERN_ERR "aty128fb: cannot reserve MMIO region\n");
+ goto err_free_fb;
+ }
+
+ /* We have the resources. Now virtualize them */
+ info = framebuffer_alloc(sizeof(struct aty128fb_par), &pdev->dev);
+ if (info == NULL) {
+ printk(KERN_ERR "aty128fb: can't alloc fb_info_aty128\n");
+ goto err_free_mmio;
+ }
+ par = info->par;
+
+ info->pseudo_palette = par->pseudo_palette;
+
+ /* Virtualize mmio region */
+ info->fix.mmio_start = reg_addr;
+ par->regbase = pci_ioremap_bar(pdev, 2);
+ if (!par->regbase)
+ goto err_free_info;
+
+ /* Grab memory size from the card */
+ // How does this relate to the resource length from the PCI hardware?
+ par->vram_size = aty_ld_le32(CNFG_MEMSIZE) & 0x03FFFFFF;
+
+ /* Virtualize the framebuffer */
+ info->screen_base = ioremap(fb_addr, par->vram_size);
+ if (!info->screen_base)
+ goto err_unmap_out;
+
+ /* Set up info->fix */
+ info->fix = aty128fb_fix;
+ info->fix.smem_start = fb_addr;
+ info->fix.smem_len = par->vram_size;
+ info->fix.mmio_start = reg_addr;
+
+ /* If we can't test scratch registers, something is seriously wrong */
+ if (!register_test(par)) {
+ printk(KERN_ERR "aty128fb: Can't write to video register!\n");
+ goto err_out;
+ }
+
+#ifndef __sparc__
+ bios = aty128_map_ROM(par, pdev);
+#ifdef CONFIG_X86
+ if (bios == NULL)
+ bios = aty128_find_mem_vbios(par);
+#endif
+ if (bios == NULL)
+ printk(KERN_INFO "aty128fb: BIOS not located, guessing timings.\n");
+ else {
+ printk(KERN_INFO "aty128fb: Rage128 BIOS located\n");
+ aty128_get_pllinfo(par, bios);
+ pci_unmap_rom(pdev, bios);
+ }
+#endif /* __sparc__ */
+
+ aty128_timings(par);
+ pci_set_drvdata(pdev, info);
+
+ if (!aty128_init(pdev, ent))
+ goto err_out;
+
+#ifdef CONFIG_MTRR
+ if (mtrr) {
+ par->mtrr.vram = mtrr_add(info->fix.smem_start,
+ par->vram_size, MTRR_TYPE_WRCOMB, 1);
+ par->mtrr.vram_valid = 1;
+ /* let there be speed */
+ printk(KERN_INFO "aty128fb: Rage128 MTRR set to ON\n");
+ }
+#endif /* CONFIG_MTRR */
+ return 0;
+
+err_out:
+ iounmap(info->screen_base);
+err_unmap_out:
+ iounmap(par->regbase);
+err_free_info:
+ framebuffer_release(info);
+err_free_mmio:
+ release_mem_region(pci_resource_start(pdev, 2),
+ pci_resource_len(pdev, 2));
+err_free_fb:
+ release_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ return -ENODEV;
+}
+
+static void aty128_remove(struct pci_dev *pdev)
+{
+ struct fb_info *info = pci_get_drvdata(pdev);
+ struct aty128fb_par *par;
+
+ if (!info)
+ return;
+
+ par = info->par;
+
+ unregister_framebuffer(info);
+
+#ifdef CONFIG_FB_ATY128_BACKLIGHT
+ aty128_bl_exit(info->bl_dev);
+#endif
+
+#ifdef CONFIG_MTRR
+ if (par->mtrr.vram_valid)
+ mtrr_del(par->mtrr.vram, info->fix.smem_start,
+ par->vram_size);
+#endif /* CONFIG_MTRR */
+ iounmap(par->regbase);
+ iounmap(info->screen_base);
+
+ release_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ release_mem_region(pci_resource_start(pdev, 2),
+ pci_resource_len(pdev, 2));
+ framebuffer_release(info);
+}
+#endif /* CONFIG_PCI */
+
+
+
+ /*
+ * Blank the display.
+ */
+static int aty128fb_blank(int blank, struct fb_info *fb)
+{
+ struct aty128fb_par *par = fb->par;
+ u8 state;
+
+ if (par->lock_blank || par->asleep)
+ return 0;
+
+ switch (blank) {
+ case FB_BLANK_NORMAL:
+ state = 4;
+ break;
+ case FB_BLANK_VSYNC_SUSPEND:
+ state = 6;
+ break;
+ case FB_BLANK_HSYNC_SUSPEND:
+ state = 5;
+ break;
+ case FB_BLANK_POWERDOWN:
+ state = 7;
+ break;
+ case FB_BLANK_UNBLANK:
+ default:
+ state = 0;
+ break;
+ }
+ aty_st_8(CRTC_EXT_CNTL+1, state);
+
+ if (par->chip_gen == rage_M3) {
+ aty128_set_crt_enable(par, par->crt_on && !blank);
+ aty128_set_lcd_enable(par, par->lcd_on && !blank);
+ }
+
+ return 0;
+}
+
+/*
+ * Set a single color register. The values supplied are already
+ * rounded down to the hardware's capabilities (according to the
+ * entries in the var structure). Return != 0 for invalid regno.
+ */
+static int aty128fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
+ u_int transp, struct fb_info *info)
+{
+ struct aty128fb_par *par = info->par;
+
+ if (regno > 255
+ || (par->crtc.depth == 16 && regno > 63)
+ || (par->crtc.depth == 15 && regno > 31))
+ return 1;
+
+ red >>= 8;
+ green >>= 8;
+ blue >>= 8;
+
+ if (regno < 16) {
+ int i;
+ u32 *pal = info->pseudo_palette;
+
+ switch (par->crtc.depth) {
+ case 15:
+ pal[regno] = (regno << 10) | (regno << 5) | regno;
+ break;
+ case 16:
+ pal[regno] = (regno << 11) | (regno << 6) | regno;
+ break;
+ case 24:
+ pal[regno] = (regno << 16) | (regno << 8) | regno;
+ break;
+ case 32:
+ i = (regno << 8) | regno;
+ pal[regno] = (i << 16) | i;
+ break;
+ }
+ }
+
+ if (par->crtc.depth == 16 && regno > 0) {
+ /*
+ * With the 5-6-5 split of bits for RGB at 16 bits/pixel, we
+ * have 32 slots for R and B values but 64 slots for G values.
+ * Thus the R and B values go in one slot but the G value
+ * goes in a different slot, and we have to avoid disturbing
+ * the other fields in the slots we touch.
+ */
+ par->green[regno] = green;
+ if (regno < 32) {
+ par->red[regno] = red;
+ par->blue[regno] = blue;
+ aty128_st_pal(regno * 8, red, par->green[regno*2],
+ blue, par);
+ }
+ red = par->red[regno/2];
+ blue = par->blue[regno/2];
+ regno <<= 2;
+ } else if (par->crtc.bpp == 16)
+ regno <<= 3;
+ aty128_st_pal(regno, red, green, blue, par);
+
+ return 0;
+}
+
+#define ATY_MIRROR_LCD_ON 0x00000001
+#define ATY_MIRROR_CRT_ON 0x00000002
+
+/* out param: u32* backlight value: 0 to 15 */
+#define FBIO_ATY128_GET_MIRROR _IOR('@', 1, __u32)
+/* in param: u32* backlight value: 0 to 15 */
+#define FBIO_ATY128_SET_MIRROR _IOW('@', 2, __u32)
+
+static int aty128fb_ioctl(struct fb_info *info, u_int cmd, u_long arg)
+{
+ struct aty128fb_par *par = info->par;
+ u32 value;
+ int rc;
+
+ switch (cmd) {
+ case FBIO_ATY128_SET_MIRROR:
+ if (par->chip_gen != rage_M3)
+ return -EINVAL;
+ rc = get_user(value, (__u32 __user *)arg);
+ if (rc)
+ return rc;
+ par->lcd_on = (value & 0x01) != 0;
+ par->crt_on = (value & 0x02) != 0;
+ if (!par->crt_on && !par->lcd_on)
+ par->lcd_on = 1;
+ aty128_set_crt_enable(par, par->crt_on);
+ aty128_set_lcd_enable(par, par->lcd_on);
+ return 0;
+ case FBIO_ATY128_GET_MIRROR:
+ if (par->chip_gen != rage_M3)
+ return -EINVAL;
+ value = (par->crt_on << 1) | par->lcd_on;
+ return put_user(value, (__u32 __user *)arg);
+ }
+ return -EINVAL;
+}
+
+#if 0
+ /*
+ * Accelerated functions
+ */
+
+static inline void aty128_rectcopy(int srcx, int srcy, int dstx, int dsty,
+ u_int width, u_int height,
+ struct fb_info_aty128 *par)
+{
+ u32 save_dp_datatype, save_dp_cntl, dstval;
+
+ if (!width || !height)
+ return;
+
+ dstval = depth_to_dst(par->current_par.crtc.depth);
+ if (dstval == DST_24BPP) {
+ srcx *= 3;
+ dstx *= 3;
+ width *= 3;
+ } else if (dstval == -EINVAL) {
+ printk("aty128fb: invalid depth or RGBA\n");
+ return;
+ }
+
+ wait_for_fifo(2, par);
+ save_dp_datatype = aty_ld_le32(DP_DATATYPE);
+ save_dp_cntl = aty_ld_le32(DP_CNTL);
+
+ wait_for_fifo(6, par);
+ aty_st_le32(SRC_Y_X, (srcy << 16) | srcx);
+ aty_st_le32(DP_MIX, ROP3_SRCCOPY | DP_SRC_RECT);
+ aty_st_le32(DP_CNTL, DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM);
+ aty_st_le32(DP_DATATYPE, save_dp_datatype | dstval | SRC_DSTCOLOR);
+
+ aty_st_le32(DST_Y_X, (dsty << 16) | dstx);
+ aty_st_le32(DST_HEIGHT_WIDTH, (height << 16) | width);
+
+ par->blitter_may_be_busy = 1;
+
+ wait_for_fifo(2, par);
+ aty_st_le32(DP_DATATYPE, save_dp_datatype);
+ aty_st_le32(DP_CNTL, save_dp_cntl);
+}
+
+
+ /*
+ * Text mode accelerated functions
+ */
+
+static void fbcon_aty128_bmove(struct display *p, int sy, int sx, int dy,
+ int dx, int height, int width)
+{
+ sx *= fontwidth(p);
+ sy *= fontheight(p);
+ dx *= fontwidth(p);
+ dy *= fontheight(p);
+ width *= fontwidth(p);
+ height *= fontheight(p);
+
+ aty128_rectcopy(sx, sy, dx, dy, width, height,
+ (struct fb_info_aty128 *)p->fb_info);
+}
+#endif /* 0 */
+
+static void aty128_set_suspend(struct aty128fb_par *par, int suspend)
+{
+ u32 pmgt;
+ struct pci_dev *pdev = par->pdev;
+
+ if (!par->pdev->pm_cap)
+ return;
+
+ /* Set the chip into the appropriate suspend mode (we use D2,
+ * D3 would require a complete re-initialisation of the chip,
+ * including PCI config registers, clocks, AGP configuration, ...)
+ *
+ * For resume, the core will have already brought us back to D0
+ */
+ if (suspend) {
+ /* Make sure CRTC2 is reset. Remove that the day we decide to
+ * actually use CRTC2 and replace it with real code for disabling
+ * the CRTC2 output during sleep
+ */
+ aty_st_le32(CRTC2_GEN_CNTL, aty_ld_le32(CRTC2_GEN_CNTL) &
+ ~(CRTC2_EN));
+
+ /* Set the power management mode to be PCI based */
+ /* Use this magic value for now */
+ pmgt = 0x0c005407;
+ aty_st_pll(POWER_MANAGEMENT, pmgt);
+ (void)aty_ld_pll(POWER_MANAGEMENT);
+ aty_st_le32(BUS_CNTL1, 0x00000010);
+ aty_st_le32(MEM_POWER_MISC, 0x0c830000);
+ mdelay(100);
+
+ /* Switch PCI power management to D2 */
+ pci_set_power_state(pdev, PCI_D2);
+ }
+}
+
+static int aty128_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct fb_info *info = pci_get_drvdata(pdev);
+ struct aty128fb_par *par = info->par;
+
+ /* Because we may change PCI D state ourselves, we need to
+ * first save the config space content so the core can
+ * restore it properly on resume.
+ */
+ pci_save_state(pdev);
+
+ /* We don't do anything but D2, for now we return 0, but
+ * we may want to change that. How do we know if the BIOS
+ * can properly take care of D3 ? Also, with swsusp, we
+ * know we'll be rebooted, ...
+ */
+#ifndef CONFIG_PPC_PMAC
+ /* HACK ALERT ! Once I find a proper way to say to each driver
+ * individually what will happen with it's PCI slot, I'll change
+ * that. On laptops, the AGP slot is just unclocked, so D2 is
+ * expected, while on desktops, the card is powered off
+ */
+ return 0;
+#endif /* CONFIG_PPC_PMAC */
+
+ if (state.event == pdev->dev.power.power_state.event)
+ return 0;
+
+ printk(KERN_DEBUG "aty128fb: suspending...\n");
+
+ console_lock();
+
+ fb_set_suspend(info, 1);
+
+ /* Make sure engine is reset */
+ wait_for_idle(par);
+ aty128_reset_engine(par);
+ wait_for_idle(par);
+
+ /* Blank display and LCD */
+ aty128fb_blank(FB_BLANK_POWERDOWN, info);
+
+ /* Sleep */
+ par->asleep = 1;
+ par->lock_blank = 1;
+
+#ifdef CONFIG_PPC_PMAC
+ /* On powermac, we have hooks to properly suspend/resume AGP now,
+ * use them here. We'll ultimately need some generic support here,
+ * but the generic code isn't quite ready for that yet
+ */
+ pmac_suspend_agp_for_card(pdev);
+#endif /* CONFIG_PPC_PMAC */
+
+ /* We need a way to make sure the fbdev layer will _not_ touch the
+ * framebuffer before we put the chip to suspend state. On 2.4, I
+ * used dummy fb ops, 2.5 need proper support for this at the
+ * fbdev level
+ */
+ if (state.event != PM_EVENT_ON)
+ aty128_set_suspend(par, 1);
+
+ console_unlock();
+
+ pdev->dev.power.power_state = state;
+
+ return 0;
+}
+
+static int aty128_do_resume(struct pci_dev *pdev)
+{
+ struct fb_info *info = pci_get_drvdata(pdev);
+ struct aty128fb_par *par = info->par;
+
+ if (pdev->dev.power.power_state.event == PM_EVENT_ON)
+ return 0;
+
+ /* PCI state will have been restored by the core, so
+ * we should be in D0 now with our config space fully
+ * restored
+ */
+
+ /* Wakeup chip */
+ aty128_set_suspend(par, 0);
+ par->asleep = 0;
+
+ /* Restore display & engine */
+ aty128_reset_engine(par);
+ wait_for_idle(par);
+ aty128fb_set_par(info);
+ fb_pan_display(info, &info->var);
+ fb_set_cmap(&info->cmap, info);
+
+ /* Refresh */
+ fb_set_suspend(info, 0);
+
+ /* Unblank */
+ par->lock_blank = 0;
+ aty128fb_blank(0, info);
+
+#ifdef CONFIG_PPC_PMAC
+ /* On powermac, we have hooks to properly suspend/resume AGP now,
+ * use them here. We'll ultimately need some generic support here,
+ * but the generic code isn't quite ready for that yet
+ */
+ pmac_resume_agp_for_card(pdev);
+#endif /* CONFIG_PPC_PMAC */
+
+ pdev->dev.power.power_state = PMSG_ON;
+
+ printk(KERN_DEBUG "aty128fb: resumed !\n");
+
+ return 0;
+}
+
+static int aty128_pci_resume(struct pci_dev *pdev)
+{
+ int rc;
+
+ console_lock();
+ rc = aty128_do_resume(pdev);
+ console_unlock();
+
+ return rc;
+}
+
+
+static int aty128fb_init(void)
+{
+#ifndef MODULE
+ char *option = NULL;
+
+ if (fb_get_options("aty128fb", &option))
+ return -ENODEV;
+ aty128fb_setup(option);
+#endif
+
+ return pci_register_driver(&aty128fb_driver);
+}
+
+static void __exit aty128fb_exit(void)
+{
+ pci_unregister_driver(&aty128fb_driver);
+}
+
+module_init(aty128fb_init);
+
+module_exit(aty128fb_exit);
+
+MODULE_AUTHOR("(c)1999-2003 Brad Douglas <brad@neruo.com>");
+MODULE_DESCRIPTION("FBDev driver for ATI Rage128 / Pro cards");
+MODULE_LICENSE("GPL");
+module_param(mode_option, charp, 0);
+MODULE_PARM_DESC(mode_option, "Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" ");
+#ifdef CONFIG_MTRR
+module_param_named(nomtrr, mtrr, invbool, 0);
+MODULE_PARM_DESC(nomtrr, "bool: Disable MTRR support (0 or 1=disabled) (default=0)");
+#endif
+
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-04 01:40:14 +0000