diff options
Diffstat (limited to 'drivers/video/backlight/Kconfig')
| -rw-r--r-- | drivers/video/backlight/Kconfig | 326 |
1 files changed, 281 insertions, 45 deletions
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index 72facb9eb7d..5d449059a55 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -8,12 +8,13 @@ menuconfig BACKLIGHT_LCD_SUPPORT Enable this to be able to choose the drivers for controlling the backlight and the LCD panel on some platforms, for example on PDAs. +if BACKLIGHT_LCD_SUPPORT + # # LCD # config LCD_CLASS_DEVICE tristate "Lowlevel LCD controls" - depends on BACKLIGHT_LCD_SUPPORT default m help This framework adds support for low-level control of LCD. @@ -24,17 +25,32 @@ config LCD_CLASS_DEVICE To have support for your specific LCD panel you will have to select the proper drivers which depend on this option. +if LCD_CLASS_DEVICE + config LCD_CORGI tristate "LCD Panel support for SHARP corgi/spitz model" - depends on LCD_CLASS_DEVICE && SPI_MASTER && PXA_SHARPSL + depends on SPI_MASTER && PXA_SHARPSL && BACKLIGHT_CLASS_DEVICE help Say y here to support the LCD panels usually found on SHARP corgi (C7x0) and spitz (Cxx00) models. +config LCD_L4F00242T03 + tristate "Epson L4F00242T03 LCD" + depends on SPI_MASTER && GPIOLIB + help + SPI driver for Epson L4F00242T03. This provides basic support + for init and powering the LCD up/down through a sysfs interface. + +config LCD_LMS283GF05 + tristate "Samsung LMS283GF05 LCD" + depends on SPI_MASTER && GPIOLIB + help + SPI driver for Samsung LMS283GF05. This provides basic support + for powering the LCD up/down through a sysfs interface. + config LCD_LTV350QV tristate "Samsung LTV350QV LCD Panel" - depends on LCD_CLASS_DEVICE && SPI_MASTER - default n + depends on SPI_MASTER help If you have a Samsung LTV350QV LCD panel, say y to include a power control driver for it. The panel starts up in power @@ -43,53 +59,102 @@ config LCD_LTV350QV The LTV350QV panel is present on all ATSTK1000 boards. +config LCD_ILI922X + tristate "ILI Technology ILI9221/ILI9222 support" + depends on SPI + help + If you have a panel based on the ILI9221/9222 controller + chip then say y to include a driver for it. + config LCD_ILI9320 - tristate - depends on LCD_CLASS_DEVICE && BACKLIGHT_LCD_SUPPORT - default n + tristate "ILI Technology ILI9320 controller support" + depends on SPI help If you have a panel based on the ILI9320 controller chip then say y to include a power driver for it. config LCD_TDO24M tristate "Toppoly TDO24M and TDO35S LCD Panels support" - depends on LCD_CLASS_DEVICE && SPI_MASTER - default n + depends on SPI_MASTER help If you have a Toppoly TDO24M/TDO35S series LCD panel, say y here to include the support for it. config LCD_VGG2432A4 tristate "VGG2432A4 LCM device support" - depends on BACKLIGHT_LCD_SUPPORT && LCD_CLASS_DEVICE && SPI_MASTER + depends on SPI_MASTER select LCD_ILI9320 - default n help If you have a VGG2432A4 panel based on the ILI9320 controller chip then say y to include a power driver for it. config LCD_PLATFORM tristate "Platform LCD controls" - depends on LCD_CLASS_DEVICE help This driver provides a platform-device registered LCD power control interface. config LCD_TOSA tristate "Sharp SL-6000 LCD Driver" - depends on LCD_CLASS_DEVICE && SPI - depends on MACH_TOSA - default n + depends on I2C && SPI && MACH_TOSA help If you have an Sharp SL-6000 Zaurus say Y to enable a driver for its LCD. +config LCD_HP700 + tristate "HP Jornada 700 series LCD Driver" + depends on SA1100_JORNADA720_SSP && !PREEMPT + default y + help + If you have an HP Jornada 700 series handheld (710/720/728) + say Y to enable LCD control driver. + +config LCD_S6E63M0 + tristate "S6E63M0 AMOLED LCD Driver" + depends on SPI && BACKLIGHT_CLASS_DEVICE + default n + help + If you have an S6E63M0 LCD Panel, say Y to enable its + LCD control driver. + +config LCD_LD9040 + tristate "LD9040 AMOLED LCD Driver" + depends on SPI && BACKLIGHT_CLASS_DEVICE + default n + help + If you have an LD9040 Panel, say Y to enable its + control driver. + +config LCD_AMS369FG06 + tristate "AMS369FG06 AMOLED LCD Driver" + depends on SPI && BACKLIGHT_CLASS_DEVICE + default n + help + If you have an AMS369FG06 AMOLED Panel, say Y to enable its + LCD control driver. + +config LCD_LMS501KF03 + tristate "LMS501KF03 LCD Driver" + depends on SPI + default n + help + If you have an LMS501KF03 LCD Panel, say Y to enable its + LCD control driver. + +config LCD_HX8357 + tristate "Himax HX-8357 LCD Driver" + depends on SPI + help + If you have a HX-8357 LCD panel, say Y to enable its LCD control + driver. + +endif # LCD_CLASS_DEVICE + # # Backlight # config BACKLIGHT_CLASS_DEVICE tristate "Lowlevel Backlight controls" - depends on BACKLIGHT_LCD_SUPPORT default m help This framework adds support for low-level control of the LCD @@ -98,10 +163,12 @@ config BACKLIGHT_CLASS_DEVICE To have support for your specific LCD panel you will have to select the proper drivers which depend on this option. +if BACKLIGHT_CLASS_DEVICE + config BACKLIGHT_ATMEL_LCDC bool "Atmel LCDC Contrast-as-Backlight control" - depends on BACKLIGHT_CLASS_DEVICE && FB_ATMEL - default y if MACH_SAM9261EK || MACH_SAM9263EK + depends on FB_ATMEL + default y if MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK help This provides a backlight control internal to the Atmel LCDC driver. If the LCD "contrast control" on your board is wired @@ -113,8 +180,7 @@ config BACKLIGHT_ATMEL_LCDC config BACKLIGHT_ATMEL_PWM tristate "Atmel PWM backlight control" - depends on BACKLIGHT_CLASS_DEVICE && ATMEL_PWM - default n + depends on ATMEL_PWM help Say Y here if you want to use the PWM peripheral in Atmel AT91 and AVR32 devices. This driver will need additional platform data to know @@ -123,18 +189,39 @@ config BACKLIGHT_ATMEL_PWM To compile this driver as a module, choose M here: the module will be called atmel-pwm-bl. +config BACKLIGHT_EP93XX + tristate "Cirrus EP93xx Backlight Driver" + depends on FB_EP93XX + help + If you have a LCD backlight connected to the BRIGHT output of + the EP93xx, say Y here to enable this driver. + + To compile this driver as a module, choose M here: the module will + be called ep93xx_bl. + config BACKLIGHT_GENERIC tristate "Generic (aka Sharp Corgi) Backlight Driver" - depends on BACKLIGHT_CLASS_DEVICE default y help Say y to enable the generic platform backlight driver previously known as the Corgi backlight driver. If you have a Sharp Zaurus SL-C7xx, SL-Cxx00 or SL-6000x say y. +config BACKLIGHT_LM3533 + tristate "Backlight Driver for LM3533" + depends on BACKLIGHT_CLASS_DEVICE + depends on MFD_LM3533 + help + Say Y to enable the backlight driver for National Semiconductor / TI + LM3533 Lighting Power chips. + + The backlights can be controlled directly, through PWM input, or by + the ambient-light-sensor interface. The chip supports 256 brightness + levels. + config BACKLIGHT_LOCOMO tristate "Sharp LOCOMO LCD/Backlight Driver" - depends on BACKLIGHT_CLASS_DEVICE && SHARP_LOCOMO + depends on SHARP_LOCOMO default y help If you have a Sharp Zaurus SL-5500 (Collie) or SL-5600 (Poodle) say y to @@ -142,7 +229,7 @@ config BACKLIGHT_LOCOMO config BACKLIGHT_OMAP1 tristate "OMAP1 PWL-based LCD Backlight" - depends on BACKLIGHT_CLASS_DEVICE && ARCH_OMAP1 + depends on ARCH_OMAP1 default y help This driver controls the LCD backlight level and power for @@ -151,63 +238,212 @@ config BACKLIGHT_OMAP1 config BACKLIGHT_HP680 tristate "HP Jornada 680 Backlight Driver" - depends on BACKLIGHT_CLASS_DEVICE && SH_HP6XX + depends on SH_HP6XX default y help If you have a HP Jornada 680, say y to enable the backlight driver. -config BACKLIGHT_PROGEAR - tristate "Frontpath ProGear Backlight Driver" - depends on BACKLIGHT_CLASS_DEVICE && PCI && X86 - default n +config BACKLIGHT_HP700 + tristate "HP Jornada 700 series Backlight Driver" + depends on SA1100_JORNADA720_SSP && !PREEMPT + default y help - If you have a Frontpath ProGear say Y to enable the - backlight driver. + If you have an HP Jornada 700 series, + say Y to include backlight control driver. config BACKLIGHT_CARILLO_RANCH tristate "Intel Carillo Ranch Backlight Driver" - depends on BACKLIGHT_CLASS_DEVICE && LCD_CLASS_DEVICE && PCI && X86 && FB_LE80578 - default n + depends on LCD_CLASS_DEVICE && PCI && X86 && FB_LE80578 help If you have a Intel LE80578 (Carillo Ranch) say Y to enable the backlight driver. config BACKLIGHT_PWM tristate "Generic PWM based Backlight Driver" - depends on BACKLIGHT_CLASS_DEVICE && HAVE_PWM + depends on PWM help If you have a LCD backlight adjustable by PWM, say Y to enable this driver. config BACKLIGHT_DA903X tristate "Backlight Driver for DA9030/DA9034 using WLED" - depends on BACKLIGHT_CLASS_DEVICE && PMIC_DA903X + depends on PMIC_DA903X help If you have a LCD backlight connected to the WLED output of DA9030 or DA9034 WLED output, say Y here to enable this driver. -config BACKLIGHT_MBP_NVIDIA - tristate "MacBook Pro Nvidia Backlight Driver" - depends on BACKLIGHT_CLASS_DEVICE && X86 - default n +config BACKLIGHT_DA9052 + tristate "Dialog DA9052/DA9053 WLED" + depends on PMIC_DA9052 + help + Enable the Backlight Driver for DA9052-BC and DA9053-AA/Bx PMICs. + +config BACKLIGHT_MAX8925 + tristate "Backlight driver for MAX8925" + depends on MFD_MAX8925 + help + If you have a LCD backlight connected to the WLED output of MAX8925 + WLED output, say Y here to enable this driver. + +config BACKLIGHT_APPLE + tristate "Apple Backlight Driver" + depends on X86 && ACPI help - If you have an Apple Macbook Pro with Nvidia graphics hardware say Y - to enable a driver for its backlight + If you have an Intel-based Apple say Y to enable a driver for its + backlight. config BACKLIGHT_TOSA tristate "Sharp SL-6000 Backlight Driver" - depends on BACKLIGHT_CLASS_DEVICE && I2C - depends on MACH_TOSA && LCD_TOSA - default n + depends on I2C && MACH_TOSA && LCD_TOSA help If you have an Sharp SL-6000 Zaurus say Y to enable a driver for its backlight config BACKLIGHT_SAHARA tristate "Tabletkiosk Sahara Touch-iT Backlight Driver" - depends on BACKLIGHT_CLASS_DEVICE && X86 - default n + depends on X86 help If you have a Tabletkiosk Sahara Touch-iT, say y to enable the backlight driver. + +config BACKLIGHT_WM831X + tristate "WM831x PMIC Backlight Driver" + depends on MFD_WM831X + help + If you have a backlight driven by the ISINK and DCDC of a + WM831x PMIC say y to enable the backlight driver for it. + +config BACKLIGHT_ADP5520 + tristate "Backlight Driver for ADP5520/ADP5501 using WLED" + depends on PMIC_ADP5520 + help + If you have a LCD backlight connected to the BST/BL_SNK output of + ADP5520 or ADP5501, say Y here to enable this driver. + + To compile this driver as a module, choose M here: the module will + be called adp5520_bl. + +config BACKLIGHT_ADP8860 + tristate "Backlight Driver for ADP8860/ADP8861/ADP8863 using WLED" + depends on BACKLIGHT_CLASS_DEVICE && I2C + select NEW_LEDS + select LEDS_CLASS + help + If you have a LCD backlight connected to the ADP8860, ADP8861 or + ADP8863 say Y here to enable this driver. + + To compile this driver as a module, choose M here: the module will + be called adp8860_bl. + +config BACKLIGHT_ADP8870 + tristate "Backlight Driver for ADP8870 using WLED" + depends on BACKLIGHT_CLASS_DEVICE && I2C + select NEW_LEDS + select LEDS_CLASS + help + If you have a LCD backlight connected to the ADP8870, + say Y here to enable this driver. + + To compile this driver as a module, choose M here: the module will + be called adp8870_bl. + +config BACKLIGHT_88PM860X + tristate "Backlight Driver for 88PM8606 using WLED" + depends on MFD_88PM860X + help + Say Y to enable the backlight driver for Marvell 88PM8606. + +config BACKLIGHT_PCF50633 + tristate "Backlight driver for NXP PCF50633 MFD" + depends on BACKLIGHT_CLASS_DEVICE && MFD_PCF50633 + help + If you have a backlight driven by a NXP PCF50633 MFD, say Y here to + enable its driver. + +config BACKLIGHT_AAT2870 + tristate "AnalogicTech AAT2870 Backlight" + depends on BACKLIGHT_CLASS_DEVICE && MFD_AAT2870_CORE + help + If you have a AnalogicTech AAT2870 say Y to enable the + backlight driver. + +config BACKLIGHT_LM3630A + tristate "Backlight Driver for LM3630A" + depends on BACKLIGHT_CLASS_DEVICE && I2C && PWM + select REGMAP_I2C + help + This supports TI LM3630A Backlight Driver + +config BACKLIGHT_LM3639 + tristate "Backlight Driver for LM3639" + depends on BACKLIGHT_CLASS_DEVICE && I2C + select REGMAP_I2C + select NEW_LEDS + select LEDS_CLASS + help + This supports TI LM3639 Backlight + 1.5A Flash LED Driver + +config BACKLIGHT_LP855X + tristate "Backlight driver for TI LP855X" + depends on BACKLIGHT_CLASS_DEVICE && I2C && PWM + help + This supports TI LP8550, LP8551, LP8552, LP8553, LP8555, LP8556 and + LP8557 backlight driver. + +config BACKLIGHT_LP8788 + tristate "Backlight driver for TI LP8788 MFD" + depends on BACKLIGHT_CLASS_DEVICE && MFD_LP8788 && PWM + help + This supports TI LP8788 backlight driver. + +config BACKLIGHT_OT200 + tristate "Backlight driver for ot200 visualisation device" + depends on BACKLIGHT_CLASS_DEVICE && CS5535_MFGPT && GPIO_CS5535 + help + To compile this driver as a module, choose M here: the module will be + called ot200_bl. + +config BACKLIGHT_PANDORA + tristate "Backlight driver for Pandora console" + depends on TWL4030_CORE + help + If you have a Pandora console, say Y to enable the + backlight driver. + +config BACKLIGHT_TPS65217 + tristate "TPS65217 Backlight" + depends on BACKLIGHT_CLASS_DEVICE && MFD_TPS65217 + help + If you have a Texas Instruments TPS65217 say Y to enable the + backlight driver. + +config BACKLIGHT_AS3711 + tristate "AS3711 Backlight" + depends on BACKLIGHT_CLASS_DEVICE && MFD_AS3711 + help + If you have an Austrian Microsystems AS3711 say Y to enable the + backlight driver. + +config BACKLIGHT_GPIO + tristate "Generic GPIO based Backlight Driver" + depends on GPIOLIB + help + If you have a LCD backlight adjustable by GPIO, say Y to enable + this driver. + +config BACKLIGHT_LV5207LP + tristate "Sanyo LV5207LP Backlight" + depends on I2C + help + If you have a Sanyo LV5207LP say Y to enable the backlight driver. + +config BACKLIGHT_BD6107 + tristate "Rohm BD6107 Backlight" + depends on I2C + help + If you have a Rohm BD6107 say Y to enable the backlight driver. + +endif # BACKLIGHT_CLASS_DEVICE + +endif # BACKLIGHT_LCD_SUPPORT |