diff options
Diffstat (limited to 'drivers/video/backlight/Kconfig')
| -rw-r--r-- | drivers/video/backlight/Kconfig | 173 |
1 files changed, 151 insertions, 22 deletions
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index 0c9373bedd1..5d449059a55 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -29,21 +29,21 @@ if LCD_CLASS_DEVICE config LCD_CORGI tristate "LCD Panel support for SHARP corgi/spitz model" - depends on SPI_MASTER && PXA_SHARPSL + depends on SPI_MASTER && PXA_SHARPSL && BACKLIGHT_CLASS_DEVICE help Say y here to support the LCD panels usually found on SHARP corgi (C7x0) and spitz (Cxx00) models. config LCD_L4F00242T03 tristate "Epson L4F00242T03 LCD" - depends on SPI_MASTER && GENERIC_GPIO + depends on SPI_MASTER && GPIOLIB help SPI driver for Epson L4F00242T03. This provides basic support for init and powering the LCD up/down through a sysfs interface. config LCD_LMS283GF05 tristate "Samsung LMS283GF05 LCD" - depends on SPI_MASTER && GENERIC_GPIO + depends on SPI_MASTER && GPIOLIB help SPI driver for Samsung LMS283GF05. This provides basic support for powering the LCD up/down through a sysfs interface. @@ -59,8 +59,16 @@ config LCD_LTV350QV The LTV350QV panel is present on all ATSTK1000 boards. +config LCD_ILI922X + tristate "ILI Technology ILI9221/ILI9222 support" + depends on SPI + help + If you have a panel based on the ILI9221/9222 controller + chip then say y to include a driver for it. + config LCD_ILI9320 - tristate + tristate "ILI Technology ILI9320 controller support" + depends on SPI help If you have a panel based on the ILI9320 controller chip then say y to include a power driver for it. @@ -88,7 +96,7 @@ config LCD_PLATFORM config LCD_TOSA tristate "Sharp SL-6000 LCD Driver" - depends on SPI && MACH_TOSA + depends on I2C && SPI && MACH_TOSA help If you have an Sharp SL-6000 Zaurus say Y to enable a driver for its LCD. @@ -117,6 +125,29 @@ config LCD_LD9040 If you have an LD9040 Panel, say Y to enable its control driver. +config LCD_AMS369FG06 + tristate "AMS369FG06 AMOLED LCD Driver" + depends on SPI && BACKLIGHT_CLASS_DEVICE + default n + help + If you have an AMS369FG06 AMOLED Panel, say Y to enable its + LCD control driver. + +config LCD_LMS501KF03 + tristate "LMS501KF03 LCD Driver" + depends on SPI + default n + help + If you have an LMS501KF03 LCD Panel, say Y to enable its + LCD control driver. + +config LCD_HX8357 + tristate "Himax HX-8357 LCD Driver" + depends on SPI + help + If you have a HX-8357 LCD panel, say Y to enable its LCD control + driver. + endif # LCD_CLASS_DEVICE # @@ -137,7 +168,7 @@ if BACKLIGHT_CLASS_DEVICE config BACKLIGHT_ATMEL_LCDC bool "Atmel LCDC Contrast-as-Backlight control" depends on FB_ATMEL - default y if MACH_SAM9261EK || MACH_SAM9G10EK || MACH_SAM9263EK + default y if MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK help This provides a backlight control internal to the Atmel LCDC driver. If the LCD "contrast control" on your board is wired @@ -176,6 +207,18 @@ config BACKLIGHT_GENERIC known as the Corgi backlight driver. If you have a Sharp Zaurus SL-C7xx, SL-Cxx00 or SL-6000x say y. +config BACKLIGHT_LM3533 + tristate "Backlight Driver for LM3533" + depends on BACKLIGHT_CLASS_DEVICE + depends on MFD_LM3533 + help + Say Y to enable the backlight driver for National Semiconductor / TI + LM3533 Lighting Power chips. + + The backlights can be controlled directly, through PWM input, or by + the ambient-light-sensor interface. The chip supports 256 brightness + levels. + config BACKLIGHT_LOCOMO tristate "Sharp LOCOMO LCD/Backlight Driver" depends on SHARP_LOCOMO @@ -209,13 +252,6 @@ config BACKLIGHT_HP700 If you have an HP Jornada 700 series, say Y to include backlight control driver. -config BACKLIGHT_PROGEAR - tristate "Frontpath ProGear Backlight Driver" - depends on PCI && X86 - help - If you have a Frontpath ProGear say Y to enable the - backlight driver. - config BACKLIGHT_CARILLO_RANCH tristate "Intel Carillo Ranch Backlight Driver" depends on LCD_CLASS_DEVICE && PCI && X86 && FB_LE80578 @@ -225,7 +261,7 @@ config BACKLIGHT_CARILLO_RANCH config BACKLIGHT_PWM tristate "Generic PWM based Backlight Driver" - depends on HAVE_PWM + depends on PWM help If you have a LCD backlight adjustable by PWM, say Y to enable this driver. @@ -237,6 +273,12 @@ config BACKLIGHT_DA903X If you have a LCD backlight connected to the WLED output of DA9030 or DA9034 WLED output, say Y here to enable this driver. +config BACKLIGHT_DA9052 + tristate "Dialog DA9052/DA9053 WLED" + depends on PMIC_DA9052 + help + Enable the Backlight Driver for DA9052-BC and DA9053-AA/Bx PMICs. + config BACKLIGHT_MAX8925 tristate "Backlight driver for MAX8925" depends on MFD_MAX8925 @@ -272,14 +314,6 @@ config BACKLIGHT_WM831X If you have a backlight driven by the ISINK and DCDC of a WM831x PMIC say y to enable the backlight driver for it. -config BACKLIGHT_ADX - tristate "Avionic Design Xanthos Backlight Driver" - depends on ARCH_PXA_ADX - default y - help - Say Y to enable the backlight driver on Avionic Design Xanthos-based - boards. - config BACKLIGHT_ADP5520 tristate "Backlight Driver for ADP5520/ADP5501 using WLED" depends on PMIC_ADP5520 @@ -302,6 +336,18 @@ config BACKLIGHT_ADP8860 To compile this driver as a module, choose M here: the module will be called adp8860_bl. +config BACKLIGHT_ADP8870 + tristate "Backlight Driver for ADP8870 using WLED" + depends on BACKLIGHT_CLASS_DEVICE && I2C + select NEW_LEDS + select LEDS_CLASS + help + If you have a LCD backlight connected to the ADP8870, + say Y here to enable this driver. + + To compile this driver as a module, choose M here: the module will + be called adp8870_bl. + config BACKLIGHT_88PM860X tristate "Backlight Driver for 88PM8606 using WLED" depends on MFD_88PM860X @@ -315,6 +361,89 @@ config BACKLIGHT_PCF50633 If you have a backlight driven by a NXP PCF50633 MFD, say Y here to enable its driver. +config BACKLIGHT_AAT2870 + tristate "AnalogicTech AAT2870 Backlight" + depends on BACKLIGHT_CLASS_DEVICE && MFD_AAT2870_CORE + help + If you have a AnalogicTech AAT2870 say Y to enable the + backlight driver. + +config BACKLIGHT_LM3630A + tristate "Backlight Driver for LM3630A" + depends on BACKLIGHT_CLASS_DEVICE && I2C && PWM + select REGMAP_I2C + help + This supports TI LM3630A Backlight Driver + +config BACKLIGHT_LM3639 + tristate "Backlight Driver for LM3639" + depends on BACKLIGHT_CLASS_DEVICE && I2C + select REGMAP_I2C + select NEW_LEDS + select LEDS_CLASS + help + This supports TI LM3639 Backlight + 1.5A Flash LED Driver + +config BACKLIGHT_LP855X + tristate "Backlight driver for TI LP855X" + depends on BACKLIGHT_CLASS_DEVICE && I2C && PWM + help + This supports TI LP8550, LP8551, LP8552, LP8553, LP8555, LP8556 and + LP8557 backlight driver. + +config BACKLIGHT_LP8788 + tristate "Backlight driver for TI LP8788 MFD" + depends on BACKLIGHT_CLASS_DEVICE && MFD_LP8788 && PWM + help + This supports TI LP8788 backlight driver. + +config BACKLIGHT_OT200 + tristate "Backlight driver for ot200 visualisation device" + depends on BACKLIGHT_CLASS_DEVICE && CS5535_MFGPT && GPIO_CS5535 + help + To compile this driver as a module, choose M here: the module will be + called ot200_bl. + +config BACKLIGHT_PANDORA + tristate "Backlight driver for Pandora console" + depends on TWL4030_CORE + help + If you have a Pandora console, say Y to enable the + backlight driver. + +config BACKLIGHT_TPS65217 + tristate "TPS65217 Backlight" + depends on BACKLIGHT_CLASS_DEVICE && MFD_TPS65217 + help + If you have a Texas Instruments TPS65217 say Y to enable the + backlight driver. + +config BACKLIGHT_AS3711 + tristate "AS3711 Backlight" + depends on BACKLIGHT_CLASS_DEVICE && MFD_AS3711 + help + If you have an Austrian Microsystems AS3711 say Y to enable the + backlight driver. + +config BACKLIGHT_GPIO + tristate "Generic GPIO based Backlight Driver" + depends on GPIOLIB + help + If you have a LCD backlight adjustable by GPIO, say Y to enable + this driver. + +config BACKLIGHT_LV5207LP + tristate "Sanyo LV5207LP Backlight" + depends on I2C + help + If you have a Sanyo LV5207LP say Y to enable the backlight driver. + +config BACKLIGHT_BD6107 + tristate "Rohm BD6107 Backlight" + depends on I2C + help + If you have a Rohm BD6107 say Y to enable the backlight driver. + endif # BACKLIGHT_CLASS_DEVICE endif # BACKLIGHT_LCD_SUPPORT |