diff options
Diffstat (limited to 'drivers/usb/storage/scsiglue.c')
| -rw-r--r-- | drivers/usb/storage/scsiglue.c | 15 |
1 files changed, 14 insertions, 1 deletions
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 94d75edef77..866b5df36ed 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -78,6 +78,8 @@ static const char* host_info(struct Scsi_Host *host) static int slave_alloc (struct scsi_device *sdev) { + struct us_data *us = host_to_us(sdev->host); + /* * Set the INQUIRY transfer length to 36. We don't use any of * the extra data and many devices choke if asked for more or @@ -102,6 +104,10 @@ static int slave_alloc (struct scsi_device *sdev) */ blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1)); + /* Tell the SCSI layer if we know there is more than one LUN */ + if (us->protocol == USB_PR_BULK && us->max_lun > 0) + sdev->sdev_bflags |= BLIST_FORCELUN; + return 0; } @@ -211,8 +217,11 @@ static int slave_configure(struct scsi_device *sdev) /* * Many devices do not respond properly to READ_CAPACITY_16. * Tell the SCSI layer to try READ_CAPACITY_10 first. + * However some USB 3.0 drive enclosures return capacity + * modulo 2TB. Those must use READ_CAPACITY_16 */ - sdev->try_rc_10_first = 1; + if (!(us->fflags & US_FL_NEEDS_CAP16)) + sdev->try_rc_10_first = 1; /* assume SPC3 or latter devices support sense size > 18 */ if (sdev->scsi_level > SCSI_SPC_2) @@ -247,6 +256,10 @@ static int slave_configure(struct scsi_device *sdev) if (us->fflags & US_FL_WRITE_CACHE) sdev->wce_default_on = 1; + /* A few buggy USB-ATA bridges don't understand FUA */ + if (us->fflags & US_FL_BROKEN_FUA) + sdev->broken_fua = 1; + } else { /* Non-disk-type devices don't need to blacklist any pages |